SDJCR 1616 SDJC for DCMT Indexable Inserts, Flat Type, 16mm Width, Right, 93° - Teknik Makina

Turning Holder (SDJC for DCMT Indexable Inserts) by Teknik Makina

The Turning Holder (Klemmhalter) is a right-hand SDJC toolholder engineered for DCMT 11T3 indexable inserts, offering compact, stable external turning in workshop and production environments.

• Turning Holder SDJC for DCMT 11T3 inserts
• Flat design for compact tool overhang
• 100 mm overall length for improved rigidity
• 16 mm shank width and height for secure clamping
• Right-hand operation with 93° cutting angle

Robust Construction for Consistent Machining Results

The holder is manufactured for stable performance: its 16 mm shank width and height together with a 100 mm overall length reduce deflection under load and improve surface finish. This compact, flat design minimises overhang and makes the toolholder suitable for confined setups or multi-tool turrets. The result is higher process reliability and fewer rework cycles thanks to consistent tool positioning and reduced vibration.

Precise Compatibility and Insert Interface

Designed specifically for DCMT 11T3 indexable inserts, the SDJC interface ensures repeatable seating and secure clamping of inserts, which simplifies insert changes and reduces setup time. The ISO designation SDJCR 1616 describes the shank and clamping geometry, making it straightforward to match the holder to existing toolholders and adapters. For users less familiar with tooling terms: an indexable insert is a replaceable cutting tip; the SDJC style denotes the holder geometry and clamping orientation.

Application Focus and Performance Benefits

With a 93° cutting angle and right-hand cutting direction, the holder excels in standard external turning and facing operations that demand stable cutting engagement. The flat head profile reduces interference when working near shoulders or recesses, improving accessibility. For production shops, this translates into predictable cutting forces and the ability to maintain tighter tolerances on turned components, supporting both small-batch and repeat production.

Installation, Fastening and Service Information

The toolholder uses a Torx fastening system for secure assembly: a T15 Torx key is specified for the insert clamp screw (M3.5 x 8.5), while the U-plate is identified as TA030 with an M5 fastening screw. These standardised fittings allow quick maintenance and straightforward replacement of wear parts. Routine checks of clamping torque and seat cleanliness will keep cutting performance reliable and extend the service life of both holder and inserts.

Strongly recommended for precision external turning: choose Teknik Makina’s Turning Holder for secure DCMT insert mounting and contact METAV Werkzeuge for tailored advice and support — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271

• Bezeichnung: Klemmhalter (Turning Holder)
• Marke: Teknik Makina
• SKU: D458TM
• Alternative designation: SDJC for DCMT Indexable Inserts
• Compatible Inserts: DCMT 11T3
• ISO designation: SDJCR 1616
• Shank width: 16 mm
• Shank height: 16 mm
• Cutting head width: 16 mm
• Overall length: 100 mm
• Cutting direction: Right
• Cutting angle: 93°
• Insert clamp screw: M3.5 x 8.5 (Torx T15)
• U-plate: TA030
• U-plate screw: M5
• Shank bar designation: H11-F
• Weight: 0.18 kg
• Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com
• Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com

FAQ

What inserts fit the Turning Holder from Teknik Makina and what does DCMT 11T3 mean?
The Turning Holder from Teknik Makina is designed for DCMT 11T3 indexable inserts; DCMT denotes the insert shape and geometry while 11T3 indicates size and tolerance class, ensuring predictable fit and cutting performance when matching insert and holder.

Is the Teknik Makina Turning Holder suitable for use in tight setups and how does the flat design help?
Yes, the Teknik Makina Turning Holder’s flat profile reduces tool overhang and improves access in confined spaces, which helps maintain rigidity and achieve better surface finishes during external turning operations.

Which fasteners and tools are required to mount inserts into the Turning Holder by Teknik Makina?
Mounting inserts in the Turning Holder by Teknik Makina requires the specified clamp screw M3.5 x 8.5 tightened with a Torx T15 key; the U-plate uses an M5 screw and the TA030 plate, enabling secure and repeatable clamping.

Can METAV Werkzeuge advise on whether the Turning Holder fits my machine setup?
METAV Werkzeuge offers expert consultation for tooling selection and setup; contact them via eMail info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271 for personalised support regarding the Turning Holder and compatible inserts.