Precision surface plates for exact measurement and inspection
A precision surface plate provides a stable reference for dimensional inspection and layout, enabling accurate measurement and improved quality control across metalworking and engineering shops. These granite and cast-iron surface plates and their complementary inspection tables are used with height gauges and stands to support repeatable measurements on machined components, delivering flatness and rigidity that reduce setup time and measurement error. Designed for calibration and inspection tasks, the systems enhance process reliability when checking tolerances and part geometry.
35mm Runout Tester With 0.002mm Resolution, Two-Point Measurement, Grooved Rollers, 100mm Max Workpiece Length - Metav IndustryLine
Take advantage of the combination of 0.002 mm accuracy, a compact 1–35 mm measuring range and grooved rollers for repeatable support to streamline runout inspection in production. Order the runout tester directly via Metav Werkzeuge or ask our consultants if needed. M208.210 Runout Tester — compact runout testing device with 0.002 mm accuracy by Metav IndustryLine M208.210 is a precision runout testing device designed for evaluating radial and axial runout on shafts and small cylindrical components in production and inspection environments. High resolution 0.002 mm accuracy Measuring range 1–35 mm Grooved rollers for secure support Simultaneous two-point measurement Precision and repeatability for production control The unit delivers 0.002 mm repeatability within a compact 1–35 mm measuring window, making it suitable for fine runout verification where tight tolerances matter. With this level of resolution, the device supports statistical process control and in-line quality checks by providing a stable, quantifiable measurement base; variances that would otherwise pass unnoticed can be identified quickly. The calibrated mechanical guidance and firm roller support reduce measurement scatter, so each check contributes reliable data for production decisions and corrective actions. Secure support and faster throughput in series inspections Designed to hold workpieces up to 100 mm length on grooved rollers with two slots, the instrument minimises slippage and centring errors during rotation. The roller arrangement enables simultaneous two-point measurement, which halves setup time when identifying eccentricity across multiple surfaces. A tactile hand wheel offers fine adjustment for alignment without complex fixtures, improving handling speed and keeping cycle times low for batch testing. These features together increase throughput while maintaining consistent measurement conditions for repeated inspections. Practical workshop integration and clear operational benefits The compact construction and roughly 3 kg mass make the device easy to position on a bench or a metrology table while retaining the stiffness needed for reproducible results. It suits routine checks in machine shops, quality departments and small-series manufacturing where reliable runout data is required without a large footprint. Note that the unit is supplied without a dial gauge, allowing users to pair their preferred indicator or sensor depending on the measurement chain and traceability requirements. For workshop adoption this flexibility supports existing calibration strategies and measuring equipment inventories. For precise runout verification choose the Metav IndustryLine M208.210 — contact Metav Werkzeuge for a tailored supply and technical advice. Technical data SKU: M208.210 GTIN: 4054469183725 eClass: 27201190 Numerical data Measuring range: 1.0–35 mm Maximum workpiece length: 100 mm Accuracy: 0.002 mm Weight: 3 kg Mounting positions: 8 Special features Grooved rollers with two cuts Simultaneous two-point measurement Hand-operated fine-adjustment wheel Supplied without dial gauge / fine measuring instrument Suitable for series measurements FAQ What accuracy can be expected from this runout tester? The runout tester delivers an accuracy of 0.002 mm, enabling sub-micron-sensitive evaluation for demanding runout inspections. What is the measuring range and maximum workpiece length? Measuring range is 1.0–35 mm with a maximum recommended workpiece length of 100 mm for reliable support and repeatable results. Are the rollers suited for cylindrical shafts and small components? Yes, the grooved rollers with two cuts provide secure support for shafts and small cylindrical parts, improving centring and stability during measurement. Is a dial gauge included with delivery? No, the device is supplied without a dial gauge so that the preferred indicator or electronic sensor can be fitted according to the user’s measurement chain. Can this device be used for series inspections? The design and adjustment features make it particularly suitable for series measurements, allowing efficient repetitive checks in a production environment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Runout Tester With 0.005mm Resolution, Max 100mm Workpiece Length, Plain Roll, Two-Point Measurement - Metav IndustryLine
Take advantage of precise runout control combined with compact handling: the device delivers 0.005 mm repeatability across a 3–35 mm diameter range and accepts workpieces up to 100 mm long, enabling efficient serial inspection with reliable results — order the runout tester directly via Metav Werkzeuge or ask our consultants if needed. Runout Tester M208.212 — 0.005 mm accuracy, 3–35 mm diameter The Runout Tester M208.212 is a compact measuring instrument for assessing radial and axial runout on shafts and short components in workshop and production environments. High precision 0.005 mm runout resolution Diameter range 3–35 mm for small shafts Simultaneous two-point measurement capability Compact for workpieces up to 100 mm long High-precision control for production quality The tester provides a 0.005 mm accuracy class that supports tight quality tolerances in machining and assembly. Such resolution reduces the need for repeated rework by detecting radial deviations at an early stage, improving process yield. The numerical specification is directly relevant for production control and incoming inspection, since the instrument translates small geometric deviations into actionable information for machine settings and corrective grinding. The emphasis on measurable precision strengthens traceability and shortens decision cycles during batch release. Built for efficient measurements on short shafts With a measuring range from 3–35 mm and a permitted workpiece length up to 100 mm, the device is tailored to inspections of small-diameter shafts, pins and short couplings. The capability for simultaneous two-point measurement halves the inspection time for concentricity checks and reduces handling steps in serial workflows. A manual handwheel provides fine positioning without the need for complex fixtures, which simplifies repetitive measurements in production and quality laboratories where throughput and reproducibility are essential. Practical mechanics that protect parts and simplify handling The roller is supplied without grooves, avoiding contact marks on finished surfaces while still providing stable support for rotating parts. Built as a compact unit and weighing approximately 3 kg, the instrument is easy to position on a bench or measuring table and integrates well with existing inspection jigs. Robust mechanical design and a clear focusing on repeatable clamping and rotation ensure that measurement scatter is minimised and inspection results remain consistent from piece to piece. Contact Metav Werkzeuge today for technical advice or to arrange a specification review for the Runout Tester M208.212 Technical Data Article number: M208.212 GTIN: 4054469183756 Label: Runout tester 3–35 mm, 0.005 mm, max. workpiece length 100 mm Facts Measuring range: 3–35 mm Max. workpiece length: 100 mm Resolution / accuracy: 0.005 mm Weight: 3 kg Mounting: 8 Special features Two-point simultaneous measurement Roller without grooves Handwheel for fine adjustment Suitable for serial measurements Compact design for bench use FAQ How accurately can runout be measured with this tester? The runout tester achieves an accuracy of 0.005 mm, allowing reliable detection of small radial deviations on shafts within the specified range. What shaft diameters and lengths are supported? The instrument covers diameters from 3–35 mm and is designed for workpieces up to 100 mm long, making it suitable for short shafts and small rotating parts. Can two measurements be taken at the same time? Yes — the device supports simultaneous two-point measurement, which speeds up concentricity and runout checks during serial inspections. Will the roller damage finished surfaces? The roller is supplied without grooves, which minimises marking on the component surface while still providing secure support during rotation. Which SKU identifies this product for ordering? Order references: M208.212 (GTIN 4054469183756) for procurement and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
39mm Adjustable Base With M10 Thread - Filetta
Reliable support for measuring tables is achieved with an adjustable foot that combines a secure M10 thread, a broad 39 mm base and a compact, service-friendly design; order the adjustable foot directly via Metav Werkzeuge or ask our consultants if needed Adjustable foot MS636.760 — M10 threaded support for measuring tables (Filetta) The adjustable foot provides a stable, height-adjustable support for measuring tables and stands, designed for secure attachment and reliable load distribution in workshop and inspection environments Adjustable support element with M10 thread Broad 39 mm base for even load distribution Simple retrofitting to standard M10 mountings Compact design for tight installation spaces Improved repeatability through stable support A robust support point is a small detail that improves measurement repeatability. The M10 thread ensures a positive mechanical connection to frames and table plates, while the 39 mm base spreads load and reduces point pressure. As a result, mechanical resonance and local deformation are reduced, which leads to more consistent readings during inspection or assembly tasks. Fewer micro-shifts at the support translate directly into lower rework rates and faster quality checks, making the component a pragmatic efficiency gain for production and metrology benches. Fast installation and compatibility with common equipment Fitting or replacing machine supports is straightforward when standardised thread sizes are used. The M10 interface of this component matches common metric fastenings, enabling quick retrofitting to existing measuring tables, tripods or stands without special adaptors. The compact footprint allows installation in confined spaces and close to fixtures, which simplifies jig assembly and shortens maintenance windows. For procurement planning, the Filetta MS636.760 is a low-complexity component that reduces downtime and supports lean workshop procedures. Practical design for wide-ranging workshop use Although compact, the support is intended for demanding shop-floor applications where secure seating and simple adjustability matter. The geometry of the base prioritises stable contact and resistance to tilting, which benefits inspection rigs, small measurement tables and portable stands alike. Sourcing these components through a dedicated distributor ensures consistent quality across batches; Metav’s distribution model provides traceable logistics and a practical supply channel for replacement parts and matching fittings, supporting uninterrupted operation on the shop floor. Contact Metav Werkzeuge in Emmerich for advice on compatibility, supply and tailored quantities for the Filetta adjustable foot MS636.760 Technical data Article number: MS636.760 Manufacturer: Filetta Category: Measuring table support (Messtisch) Measurements & thread Base diameter: 39 mm Thread: M10 Thread length: 20.6 mm Features Adjustable foot element Intended for measuring tables and stands Compact footprint for tight installation spaces FAQ Is the support compatible with standard metric mountings? Yes. The Filetta MS636.760 is equipped with an M10 thread and is compatible with standard metric M10 mountings used on measuring tables and stands. What is the contact area of the base? The base has a diameter of 39 mm, offering a broad contact area for improved load distribution and reduced point pressure. How deep is the threaded engagement? Thread engagement is provided by an M10 thread with a thread length of 20.6 mm, suitable for secure fastening into common support plates. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
3–25mm Runout Testing Device With Spring-Loaded Adjustable Contact Wheel, Aluminium - Filetta
Take advantage of high repeatability (0.002 mm) and a compact 3–25 mm measuring range combined with a spring-loaded, height-adjustable pressure roller for consistent contact during runout checks; order the device directly via Metav Werkzeuge or consult our specialists for tailored application advice. Runout tester MS910.491 — compact runout measuring device, 0.002 mm accuracy (Filetta) Runout tester MS910.491 is a compact measuring device for quickly checking radial runout on small shafts and precision components in machining and quality control environments. Compact 3–25 mm measuring range for small diameters High repeatability with 0.002 mm resolution Spring-loaded height-adjustable pressure roller for consistent contact Aluminium-alloy body for low weight and stable alignment Precision that speaks for itself The instrument delivers 0.002 mm accuracy, making it suitable where tight radial tolerances are required. The measuring range 3–25 mm targets small-diameter parts such as pin shafts, small bearings and precision spindles; this positions the unit in the micro class of runout testers, where space efficiency and stiffness are crucial. Stated accuracy is a decisive factor for quality assurance workflows: repeatable readings reduce rework and support faster go/no-go decisions on the production line. Designed for repeatable contact and straightforward setup Mechanical features are chosen for reproducibility and ease of use. The body is machined from aluminium alloy, keeping the total mass to 3.5 kg while maintaining alignment. A spring-loaded, height-adjustable pressure roller ensures uniform contact force across measurements, while the integrated handwheel aids fine positioning. The device accepts mounting or reception at Ø6 mm and Ø8 mm, and is provided with a fixing pin Ø7.56 mm for secure fixturing. Two threaded mounts (2x M8) are available for attachment to stands or fixtures, supporting stable tests and quick alignment to a reference axis. Note: delivery excludes a dial indicator and the additional accessories shown in product images. Where it fits in the workshop and what it enables This compact runout tester is suited to toolrooms, precision assembly benches and inspection departments that need a fast, reliable check of concentricity and radial deviation on small components. The device helps to identify out-of-tolerance shafts before final assembly, lowering scrap rates and speeding process control routines. The combination of low mass, compact footprint and consistent contact control makes it straightforward to integrate into bench setups or paired with a stand for repeat measurements. For procurement decisions, the Filetta MS910.491 delivers a balance of precision, handling and quick fixturing that supports efficient quality gates. For reliable runout measurement with the Filetta MS910.491, contact Metav Werkzeuge in Emmerich to arrange supply or discuss suitability for specific parts and fixtures Technical data Article number: MS910.491 Brand: Filetta Category: Messgeräte / Schaubstock | Prismen Material: Aluminium alloy Included accessory: Fixing pin Ø7.56 mm Note: Delivery without dial indicator and additional accessories shown in image Facts Measuring range: 3.0–25.0 mm Maximum accuracy: 0.002 mm Weight: 3.5 kg Mounting threads: 2x M8 Accepts Ø6 mm and Ø8 mm reception Special features Spring-loaded, height-adjustable pressure roller Handwheel for fine adjustment Compact design for micro-range components Stable aluminium-alloy construction FAQ How small a shaft can be checked with this runout tester? The runout tester MS910.491 covers a measuring range from 3.0 to 25.0 mm, so it is intended for small-diameter shafts and similar precision components. What level of precision can be expected during repetitive measurements? Repeatability is expressed as 0.002 mm, enabling consistent runout checks suitable for tight-tolerance quality control tasks with the Filetta runout tester MS910.491. Can the device be mounted to a stand for repeated checks? Yes. The unit has 2x M8 mounting threads and accepts Ø6 mm and Ø8 mm receptions, allowing secure mounting to stands or fixtures for reproducible setups. Is a dial gauge included for measurement readout? No. The delivery explicitly excludes a dial indicator and the other accessories pictured; the tester is supplied with the fixing pin Ø7.56 mm only. What benefits does the spring-loaded pressure roller provide? The spring-loaded, height-adjustable pressure roller ensures consistent contact force across the measured surface, reducing variation caused by manual pressure and improving measurement repeatability. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
400 x 250 x 50 mm Granite Surface Plate Grade 0, DIN 876/0 - Metav IndustryLine
The combination of Grade 0 accuracy, dark granite construction and a solid 16 kg mass ensures stable, repeatable inspection results; suitable for layout work and precision checks. Order the granite plate directly via Metav Werkzeuge or contact the consultants for application advice. Granite plate 400 x 250 x 50 mm, Grade 0 (Metav IndustryLine) A Granite plate 400 x 250 x 50 mm, Grade 0 designed as a stable control surface for precision inspection, layout and checking tasks in workshops and metrology rooms Grade 0 accuracy per DIN 876/0 Dimensions 400 x 250 x 50 mm Made from dark granite for stability Solid 16 kg mass for vibration damping Reliable flatness and measurement support for inspection tasks The Grade 0 classification according to DIN 876/0 guarantees a reference surface suitable for demanding inspection and layout work. The high flatness tolerance of a Grade 0 surface reduces systematic measuring errors and provides a stable datum for visual checks, height gauges and simple mechanical measuring rigs. The dark granite material resists corrosion and retains its geometry over time, so routine results remain reproducible even in busy workshop environments. Designed mass and material for vibration damping and long-term stability With a substantial mass of 16 kg, the plate dampens minor vibrations and improves the stability of hand-held measuring operations and stationary instruments. The dark granite construction combines low thermal expansion with excellent wear resistance; this means surface deviations due to temperature changes are minimised and the plate remains a dependable reference during production runs. The result is improved measurement consistency and fewer repeat checks. Practical information for integration and use This item is supplied as a control surface only; no stand is included. The compact footprint of 400 x 250 x 50 mm makes the plate suitable for bench-top use while still offering a robust reference area for components and gauges. The moderate weight allows single-person handling in most cases and ensures the surface sits firmly during routine checks and marking operations. The plate is identified by SKU M206.103 and GTIN 4054469102948 for straightforward inventory and reordering. Contact Metav Werkzeuge today to reserve the Grade 0 granite plate for immediate dispatch from Emmerich and benefit from expert advice on integration into the measuring workflow—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M206.103 GTIN: 4054469102948 ECLASS: 21170603 Facts Dimensions: 400 x 250 x 50 mm Weight: 16 kg Grade: 0 Special features Material: dark granite Standard: DIN 876/0 Note: only control plate, without stand Tariff code: 68022300 FAQ What tolerance class does the plate comply with? The plate complies with Grade 0 flatness according to DIN 876/0, making it suitable for high-precision inspection tasks. Is the support structure included with the granite plate? No; the product is supplied as a control plate only and is delivered without a stand. Which material is the surface plate made from? The surface is manufactured from dark granite, chosen for its low thermal expansion and wear resistance. What is the item identifier for reordering? The SKU is M206.103 and the GTIN is 4054469102948 for inventory and procurement. Is the plate suitable for bench-top metrology setups? Yes; the dimensions 400 x 250 x 50 mm and the 16 kg mass make it well suited for bench-top inspection and layout applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 x 300 mm Scriber Plate Gray Cast Iron DIN 876/3 - Metav IndustryLine
A compact, workshop-grade marking plate that combines grey cast iron construction with DIN 876/3 flatness for reliable layout and scribing work. Benefit from a stable reference surface and vibration-damping mass to keep routine inspection and layout cycles consistent. Order the plate directly via Metav Werkzeuge or ask the technical consultants for application advice. Marking Plate M206.203 — Grey cast iron, 400 x 300 mm (DIN 876/3) by Metav IndustryLine The Marking Plate M206.203 is a rigid grey cast iron layout plate intended for precise scribing, marking and light inspection tasks in workshop and production environments. Grey cast iron, DIN 876/3 accuracy Stable, rigid base for precise scribing Compact 400 x 300 mm footprint Weighs 13 kg for vibration damping Repeatable layout and scribing with engineered flatness A solid reference surface is the foundation of consistent layout work. The plate is manufactured from grey cast iron and produced to DIN 876/3, which defines the required flatness and manufacturing tolerances for this class of inspection surface. This specification reduces measurement uncertainty and provides a reproducible datum for scribing and comparative checks. The machined top offers a dependable plane for marking operations, lessening the need for repeated realignment and helping maintain production throughput. Compact footprint that still controls vibration The format of 400 x 300 mm delivers a practical balance between reach and handling. With a mass of 13 kg, the plate benefits from inherent vibration damping, so marks and scribe lines remain steady even when performed by hand across the surface. The compact size allows straightforward positioning on benches or inspection tables while offering enough working area for medium-sized components. The design supports quick setup and accurate transfer of layout lines without the bulk of larger surface plates. Built for workshop integration and durable use Made from robust cast iron and finished for practical workshop use, the layout plate resists routine wear and preserves its reference quality with basic care. The DIN 876/3 conformity signals suitability for everyday marking, inspection and comparative layout tasks in metalworking and assembly areas. The product M206.203 fits neatly into existing inspection routines and complements measuring benches and small fixtures, providing a reliable datum that reduces rework and speeds layout cycles. For specification support or to secure this Metav IndustryLine marking plate for the workshop, contact Metav Werkzeuge — Metav’s consultants can advise on integration and delivery options. Technical Data Article number: M206.203 GTIN: 4054469103310 eClass: 21170605 Customs tariff number: 90178090 Facts Dimensions: 400 x 300 x 25 mm Overall height: 60 mm Weight: 13 kg Special features Material: Grey cast iron Standard: DIN 876/3 Intended use: Marking, scribing and layout work Category: Measuring table (Messtisch) FAQ What tolerance class does the plate meet? The marking plate fulfils DIN 876/3, providing a reproducible flatness class suitable for workshop scribing and general layout tasks. What is the plate made from and how does that help? Constructed from grey cast iron, the plate offers high mass for vibration damping and a stable surface that preserves flatness under normal workshop use. Are the dimensions suitable for bench work? The compact 400 x 300 mm footprint and a mass of 13 kg make the plate easy to position on benches while providing a stable working area for medium components. Can the plate be used for inspection as well as marking? Yes, the machined reference surface and compliance with DIN 876/3 make the plate suitable for both layout and basic inspection or comparative checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 x 400 x 100 mm Granite Surface Plate Grade 0, DIN 876/0 - Metav IndustryLine
Reliable, wear‑resistant reference surface engineered for workshop metrology: the plate combines Grade 0 flatness with dense dark granite construction to deliver stable measurements and excellent vibration damping. With a compact footprint and substantial mass, it reduces thermal and mechanical distortion for repeatable inspection results. Order the granite plate directly via Metav Werkzeuge or ask our consultants if needed. Granite plate 400 x 400 x 100 mm, Grade 0 — Metav IndustryLine surface plate The Granite plate 400 x 400 x 100 mm Grade 0 is a precision surface plate designed as a stable reference for inspection, layout and quality control tasks in machine shops and metrology labs. Grade 0 accuracy to DIN 876/0 Dense dark granite for stable reference 400 x 400 x 100 mm flat working area 50 kg mass for excellent vibration damping Stable reference for repeatable measurements A surface reference in Grade 0 provides a high level of flatness suitable for routine quality control and workshop inspection. Certified to DIN 876/0, the plate serves as a reliable horizontal datum for layout, squaring and comparative checks. The specified grade indicates a fine tolerance class that keeps systematic measurement errors low; this makes the component ideal where consistent, repeatable results are required rather than laboratory micro‑metrology. The solid construction and flatness class reduce the need for frequent readjustment of tools and fixtures, shortening inspection cycles and streamlining throughput. Material and thermal performance for everyday use Manufactured from dark granite, the plate excels in thermal stability and wear resistance compared with metallic reference surfaces. Granite’s low coefficient of thermal expansion and high density minimise dimensional change during normal shop temperature fluctuations, supporting stable results across measurement runs. The inherent damping properties of the stone, combined with a mass of 50 kg, suppress small vibrations from nearby machinery, improving dial and probe readings. The result is a robust reference surface that requires little maintenance and retains its calibration over time when handled and stored correctly. Ready integration into inspection layouts and fixtures As a compact surface plate, the unit is supplied as a control plate only — without stand — offering flexibility for direct mounting on benches, stands, or custom frames. The flat working area of 400 x 400 x 100 mm provides ample space for fixturing small to medium components used in general machine building and toolmaking. The dense top surface is suitable for routine cleaning and can be used with surface plates accessories and parallels. For procurement and logistics, the plate is a practical balance between manoeuvrability and stability: substantial enough to damp vibrations, yet small enough for single‑person placement with appropriate handling aids. Contact Metav Werkzeuge for guidance on workshop integration, delivery options from Emmerich and compatibility with existing inspection equipment for the Metav IndustryLine granite plate M206.104 Technical data Article number: M206.104 GTIN: 4054469102955 Manufacturer: Metav IndustryLine Facts Dimensions: 400 x 400 x 100 mm Weight: 50 kg Tariff number: 68022300 Standard: DIN 876/0 Special features Material: dark granite Grade: 0 Usage: inspection and layout work Note: only control plate, without stand FAQ What flatness class does the plate meet? The plate conforms to Grade 0 flatness and is manufactured to DIN 876/0, providing a high‑grade workshop reference suitable for general inspection tasks. Can the plate be used for layout and squaring tasks? Yes. The dense granite top and 400 x 400 x 100 mm working area make it well suited for layout, squaring and comparative checks in machine shops and quality control cells. Is a stand or frame included with the delivery? No. This unit is supplied as a control plate only and is delivered without a stand; it can be mounted on benches or compatible frames as required. How does the material benefit measurement stability? The dark granite construction offers low thermal expansion and excellent vibration damping, which helps to maintain repeatable measurement results under typical workshop conditions. What is the product SKU for ordering or referencing? The surface plate is listed under SKU M206.104 and is part of the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Marking Plate Cast Iron, DIN 876/3 - Metav IndustryLine
Take advantage of the combination of DIN 876/3 flatness, grey cast iron stability and a compact 400 x 400 mm working area for reliable marking and inspection tasks; order the surface plate directly via Metav Werkzeuge or ask our consultants if needed. Surface plate M206.204 — 400 x 400 mm grey cast iron, DIN 876/3 Surface plate M206.204 provides a flat, stable reference plane for scribing, inspection and bench layout work in small to medium workshops. DIN 876/3 flatness class 400 x 400 mm working surface Grey cast iron construction 17 kg mass for vibration damping High-precision reference for consistent layout work A certified flat reference is the foundation of repeatable marking and inspection. The DIN 876/3 classification indicates a controlled surface tolerance that supports accurate scribing and component alignment. With a 400 x 400 mm top face, this plate suits routine layout tasks and inspection work where a compact, precise datum is required. The standard-compliant surface reduces rework by ensuring measurements and markings are made against a known flat plane, helping to maintain process reliability on the shop floor. Mass and material that improve measurement stability Made from grey cast iron, the plate’s material properties give inherent vibration damping and wear resistance, which stabilises items during layout or checking operations. The unit weight of 17 kg increases resistance to movement and improves contact stability when tools or small assemblies are placed on the surface. The overall construction supports consistent results in repetitive tasks, while the compact footprint keeps the plate easy to integrate on workbenches without compromising stability. Practical integration into workshop routines This compact reference plate is particularly suited to inspection benches, marking-out stations and small-assembly jigs where a reliable datum is needed but space is limited. The moderate height and robust build offer both handling convenience and functional durability. As part of the Metav IndustryLine, the component aligns with a broad portfolio of precision aids that streamline quality control and everyday measuring tasks, making it straightforward to standardise procedures across multiple workstations. For secure procurement and expert advice on workshop integration, contact Metav Werkzeuge to discuss the Surface plate M206.204 and its suitability for specific marking or inspection applications Technical data Article number: M206.204 GTIN: 4054469103327 Category: Messtisch Facts Working surface: 400 x 400 mm Overall height: 65 mm Plate thickness (reference dimension): 25 mm Weight: 17 kg Special features Material: Grey cast iron Standard: DIN 876/3 Tariff number: 90178090 eClass: 21170605 FAQ What applications is this surface plate intended for? The Surface plate M206.204 from Metav IndustryLine is intended for scribing, visual inspection and bench layout tasks where a compact, flat reference plane is required. How does the DIN 876/3 classification affect daily use? DIN 876/3 ensures a documented flatness tolerance so that routine markings and checks carried out with the Metav surface plate are reproducible and traceable. Is the material suitable for long-term workshop use? Yes, the grey cast iron construction of the M206.204 provides good wear resistance and damping properties suitable for prolonged shop-floor use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x250mm Granite Surface Plate With 4x M10 Threaded Inserts, DIN 876/0 - Filetta
Benefit from the combination of DIN 876/0 flatness, robust granite construction and integrated M10 fixing points for reliable inspection and fixture work; order this plate directly via Metav Werkzeuge or consult our advisers for application advice. Granite plate MS402.038 — precision surface plate, 400 x 250 x 50 mm, 4×M10 (Filetta) The Granite plate MS402.038 is a compact precision surface plate intended as a flat reference and mounting surface for inspection, jig assembly and metrology bench applications. High-stability granite construction DIN 876/0 accuracy class Four M10 threaded fixing points Repeatable measurements through proven flatness The plate is manufactured to DIN 876/0, which ensures a defined level of flatness suitable for routine inspection and workshop control tasks. The combination of natural granite and controlled machining reduces local deformation under load, delivering a stable reference surface that improves measuring repeatability. This level of specification benefits processes where consistent comparison of parts is required and helps to reduce rework caused by uncertain reference standards. Secure fixturing and practical bench format With four threaded fixing points (4×M10) and compact dimensions of 400 x 250 x 50 mm, the plate offers a practical balance between reach and rigidity for bench-top work. The overall mass provides inherent stability during measurements and small assembly tasks, while the threaded inserts simplify attachment of fixtures, clamping elements or lightweight stands. This results in faster set-up times and fewer adjustments when aligning components for visual inspection or jig assembly. Built for workshop routines and inspection benches The material choice provides wear resistance and dimensional stability under normal workshop conditions, making the plate well suited to everyday metrology tasks on inspection benches or portable stands. Its format and thread pattern match common fixturing practices so that small fixtures and tripods can be integrated without complicated adaptors. The result is a practical reference surface that supports consistent quality checks and straightforward integration into existing inspection workflows. For precise application advice or to arrange supply of the Filetta MS402.038 through Metav Werkzeuge in Emmerich, contact Metav Werkzeuge to confirm suitability and delivery details Technical data Article number: MS402.038 Dimensions: 400 x 250 x 50 mm Weight: 20 kg Threads: 4 x M10 Standard: DIN 876/0 Facts Flatness class: DIN 876/0 Material: granite Number of threaded fixing points: 4 Thread size: M10 Mass: 20 kg Special features Suitable for metrology and inspection tables Compact format for bench-top use Compatible with stands and fixtures (stativ) Robust granite surface resists wear FAQ What flatness standard does the plate meet? The Filetta granite plate MS402.038 is manufactured to DIN 876/0, providing a defined flatness class for routine inspection and comparative measurements. How can the plate be mounted or fixed? The plate includes four M10 threaded fixing points for direct attachment of clamping elements, fixtures or lightweight stands. Is the plate suitable for bench-top inspection use? Yes, the 400 x 250 x 50 mm format and 20 kg mass make the plate well suited to bench-top inspection and jig assembly where a stable reference surface is required. How should the surface be maintained? Maintain the granite surface with a soft brush or lint-free cloth; avoid abrasive cleaners and strong solvents to preserve the measuring face and mounting threads. Can the plate be used with portable stands or tripods? The design and threaded fixing points allow integration with common portable stands and fixtures, enabling flexible use on inspection benches and small assembly stations. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
400x250x50 mm Granite Plate With 3x M8 Mounting Threads, DIN 876/0 - Metav IndustryLine
Take advantage of a DIN 876/0 reference surface combined with the mass and stiffness of dark granite to secure repeatable measurement results; the three M8 mounting points enable direct attachment of a measuring stand for compact inspection setups. Order the granite surface plate directly via Metav Werkzeuge or ask the consultants for installation advice. Granite surface plate M206.113 — 400×250×50 mm with 3× M8 (DIN 876/0) The granite surface plate M206.113 is a compact, high‑stability measuring reference for workshop inspection and bench metrology, featuring a wear‑resistant dark granite surface and three M8 threaded mounting points for secure attachment of test stands Precision grade DIN 876/0 accuracy Surface 400×250×50 mm in dark granite Three M8 threaded mounting points Stable weight 15.6 kg for vibration damping Repeatable flatness for reliable quality checks A reference surface built to DIN 876/0 offers a clearly defined specification for allowable deviations, so repeat measurements remain comparable over time. The flatness of the plate is the fundamental contributor to measurement reproducibility: a stable reference plane reduces geometric uncertainty when comparing parts or setting gauges. For routine inspection tasks, this translates into fewer reworks and a faster go/no‑go decision process, improving overall throughput in production control. Material benefits that reduce environmental effects Made from dark granite, the slab combines low thermal expansion with excellent wear resistance, which keeps the working surface stable under typical workshop temperature fluctuations. Granite’s natural damping reduces susceptibility to ambient vibrations, while its resistance to scratching and corrosion preserves the reference quality over long service life. These material properties make the plate especially suitable for precision jigs, small assembly fixtures and repeat inspection of medium‑sized components. Secure mounting and handling for compact setups Equipped with 3 × M8 threaded mounting points, the plate accepts measuring stands and fixturing without additional adapters, enabling a compact measuring station on the workshop bench. Its mass—15.6 kg—provides inherent stability and aids vibration damping during probing or manual measurements, while keeping the unit compact enough for single‑person handling with care. The integrated threads shorten setup time and improve positional stability for dial gauges and small probe arms. Practical size for workshop versatility With overall dimensions of 400×250×50 mm, this surface is large enough for most bench inspection tasks yet small enough to be repositioned or stored easily. The format suits general metalworking and precision assembly where a reproducible reference plane is required for squareness checks, height setting or comparative measurements. Compliance with a DIN accuracy class means the plate fits standardised workflows in quality control and measuring laboratories, simplifying documentation and traceability. Discuss mounting and delivery with Metav Werkzeuge’s Emmerich team to ensure the granite surface plate M206.113 integrates with existing stands and inspection benches Technical data Article number: M206.113 GTIN: 4054469103150 Tariff number: 68022300 Facts Size: 400×250×50 mm Weight: 15.6 kg Threads: 3 × M8 Special features Material: dark granite Accuracy: DIN 876/0 Category: Measuring table FAQ What level of flatness tolerance does this plate offer? The plate meets DIN 876/0, which defines the allowable flatness deviation for this accuracy grade and ensures a certified reference level for routine inspection. Can measuring stands be fixed directly to the plate? Yes. The plate is supplied with 3 × M8 threaded mounting points so measuring stands and small fixtures can be attached directly for a compact inspection setup. Is the granite surface suitable for workshop environments? The dark granite construction provides low thermal expansion and good wear resistance, making the slab robust for normal workshop conditions and repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x300x50 mm Granite Surface Plate With 6x M8 Top And 4x M10 Bottom, DIN 876/0 - Metav IndustryLine
Take advantage of the combination of a stable, wear‑resistant measuring surface, precise compliance with DIN 876/0, and practical mounting options for reliable inspection workflows; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Granite plate M206.117 — 400 x 300 x 50 mm, DIN 876/0 (Metav IndustryLine) The Granite plate M206.117 is a compact measuring table designed as a flat, stable reference surface for workshop inspection, fixture set‑up and small‑scale assembly measurement tasks. High-stability dark granite construction Compliant with DIN 876/0 standard Mounting threads for fixture integration Precise flatness for inspection work Consistent reference surface for repeatable measurements A rigid reference surface is the foundation of reliable metrology. The combination of a 400 x 300 x 50 mm footprint and a mass of 20 kg gives a low centre of gravity and effective vibration damping, which helps reduce measurement scatter during manual or instrumented checks. The flatness ensured by the DIN grade contributes directly to traceable results on the shop floor and in quality control, so measuring sessions become faster and results more trustworthy. Flexible integration with fixtures and stands Equipped with mounting threads, the plate allows simple integration of clamping fixtures and measuring stands. The provision of 6 x M8 and 4 x M10 threaded points supports a variety of attachments and accessories, enabling modular fixturing without invasive modification of the measuring surface. This fixture integration capability streamlines setup times and reduces the need for bespoke adapters when switching between inspection tasks. Durable material and standardised accuracy for long service life Manufactured from dark granite, the plate resists wear and maintains thermal stability better than many metallic alternatives; that results in smaller dimensional shifts under routine workshop conditions. Conformity to DIN 876/0 indicates the highest grade of surface accuracy within that norm, making this solution suitable where precise flatness matters. Handling is straightforward: the plate’s mass provides stability in use while remaining manageable for two‑person transfers within a workshop or lab. Practical benefits for inspection, layout and assembly work The plate serves as a multi‑purpose metrology aid: as a base for visual inspection, a datum for layout tasks, or as the foundation for mounted gauges and small fixtures. Its compact size balances reach and stiffness, delivering superior rigidity compared with longer plates of similar cross section. The result is improved measurement reproducibility and a reduction in rework, supporting a smoother production flow and better quality outcomes. Contact Metav Werkzeuge for tailored advice and local availability — Metav IndustryLine granite plates are stocked in Emmerich and can be prepared for prompt dispatch to the workshop. Technical data Article number: M206.117 GTIN: 4054469183527 Material: dark granite Standard: DIN 876/0 Facts Dimensions: 400 x 300 x 50 mm Weight: 20 kg Special features Mounting threads: 6 x M8, 4 x M10 Category: Measuring table / messtisch Image asset available for reference (thumbnail) FAQ What surface accuracy does the plate provide? The granite plate M206.117 is manufactured to meet DIN 876/0, which denotes the highest flatness grade within that standard and supports precise inspection tasks. Can the plate be used as a base for measuring stands and gauges? Yes, the plate’s threaded points (6 x M8 and 4 x M10) permit secure attachment of measuring stands, gauges and fixtures, allowing modular set‑ups for inspection and assembly. Is the material suitable for a busy workshop environment? Constructed from dark granite, the plate delivers good wear resistance and thermal stability, making it appropriate for regular use in industrial and shop settings. How does the plate help reduce measurement variability? The combination of mass (20 kg), granite stiffness and the DIN 876/0 flatness reduces vibration and geometric drift, which improves repeatability for manual and instrumented measurements. What is the recommended handling method for the plate? Given its mass and dimensions, handling with two persons or appropriate lifting aids is recommended; the plate’s size balances stability and manageability for workshop logistics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x400x50 mm Granite Plate With 3x M8 Mounting Threads, DIN 876/0 - Metav IndustryLine
Take advantage of a stable, wear‑resistant reference surface and the convenience of three threaded mounts for secure fixturing; the combination of DIN 876/0 accuracy and dense dark granite supports repeatable inspection and layout tasks. Order the granite surface plate directly via Metav Werkzeuge or consult the technical team for application advice. Granite surface plate 400 x 400 x 50 mm — Surface plate with 3x M8, DIN 876/0 (Metav IndustryLine) The Granite surface plate 400 x 400 x 50 mm is a compact, thermally stable reference plane for metrology, inspection and workshop layout tasks Precise DIN 876/0 flatness 3x M8 threaded mounting points Dense dark granite for thermal stability Built for repeatable precision A DIN 876/0 classification guarantees a high degree of planar accuracy, making the plate an appropriate choice where consistent reference geometry is required. The 400 × 400 × 50 mm footprint offers a practical balance between working area and rigidity; at 25 kg the plate resists vibration and local deformation during measurement. For inspections that require reliable repeatability, the combination of a hard natural stone surface and a validated manufacturing standard reduces uncertainty and simplifies conformity checks. Robust mounting and material benefits Threaded attachments simplify integration with measurement stands and fixtures: the 3x M8 threaded ports allow secure clamping or permanent mounting to a base or a measuring stand without resorting to improvised fixturing. The dark granite body delivers excellent wear resistance and low thermal expansion compared with many metals, which helps maintain a stable datum across temperature variations in a standard workshop environment. This results in fewer setup rechecks and more productive inspection cycles. Practical advantages for the workshop and quality lab Using a dedicated granite reference surface shortens setup times for gauges, dial indicators and manual measuring assemblies because a single, flat datum removes the need for temporary shims or complex alignment procedures. The plate supports layout work, comparative inspection and alignment tasks where a reliable reference is essential. Supplied as a compact, transportable block, it is suitable for inspection benches, toolroom use and as a fixed station on production lines where a repeatable reference plane improves throughput and reduces scrap. Contact Metav Werkzeuge in Emmerich to discuss integration options for the Metav IndustryLine granite surface plate and to arrange delivery or technical consultation Technical Data Article number: M206.114 Label: Granite surface plate, 400 x 400 x 50 mm, with 3 x M8 DIN 876/0 Material: dark granite Standard: DIN 876/0 Facts Dimensions: 400 x 400 x 50 mm Weight: 25 kg Threading: 3 x M8 GTIN: 4054469103167 Tariff number: 68022300 eClass: 21170603 Special features Dense natural granite for stability and wear resistance Three threaded mounts for measuring stands or fixtures Compact footprint for bench and workshop use Suitable as a stable reference surface for inspection and layout FAQ What flatness class does this plate have? The plate is specified to DIN 876/0, which indicates a high flatness standard suitable for precise inspection and layout tasks. Can the plate be mounted to a measuring stand? Yes — the product includes 3x M8 threaded mounting points intended for secure attachment to stands or fixturing systems. What material is the surface plate made from? The surface plate is manufactured from dark granite, chosen for its wear resistance and low thermal expansion. Is a calibration certificate supplied with the surface plate? No calibration certificate is specified in the product data for this item; the product description does not list an included calibration document. What applications suit this granite surface plate? The plate is intended for metrology workstations, toolroom inspection, layout and bench‑level comparative measurements where a stable, repeatable reference surface is required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Foot for Granite Plate M10 Thread, Set of 4, Length 32 mm - Metav IndustryLine
Take advantage of the M10 threaded fixing and Ø50 mm contact area to gain a low‑profile, vibration‑resistant support for measurement plates; the compact 32 mm overall length and lightweight construction ensure easy retrofitting and reliable repeatability on workshop granite bases. Order directly via Metav Werkzeuge or consult their technical team for compatibility questions. M206.118 Granite plate feet (M10, Ø50 mm) — Metav IndustryLine The M206.118 is an accessory for granite plates with an M10 thread and 50 mm diameter pads, engineered to provide stable, low‑profile support for precision measurement bases and fixtures. M10 threaded attachment for secure fixing Ø50 mm support pads for stable contact Compact 32 mm overall length for low profile Increased stability for repeatable measurements Granite support feet with a larger contact pad reduce point pressure and improve the distribution of load across the measurement surface. The Ø50 mm pads offer a broader contact area that helps to limit micro‑movement and vibration, which translates into more repeatable readings on measurement plates and assemblies. Supplied as a set of four, the component supports four‑point seating that stabilises small to medium‑sized bases without adding significant height, making these feet a practical choice where measurement integrity is essential. Straightforward fitting and broad compatibility The M10 screw interface simplifies installation and replacement on compatible plates and fixtures. The M10 thread enables secure mechanical attachment without special tooling, allowing retrofitting to existing measurement setups. Compatibility is documented with models M206.116 and M206.117, and the design is suitable for use wherever a threaded M10 support is specified. The compact form factor also allows easy integration into tight assemblies while maintaining robust mechanical contact. Workshop efficiency through compact design A total length of 32 mm overall length makes these feet particularly suitable for applications that require a low profile to preserve working clearance. At a nominal 0.2 kg the set keeps added mass to a minimum, reducing handling effort and simplifying transport and storage of measurement fixtures. The compact design supports quick assembly workflows and reduces the chance of interference with jigs, gauges or other measuring instruments, helping to keep inspection processes both efficient and dependable. Contact Metav Werkzeuge for tailored advice on integrating these granite plate feet into existing measurement systems or to confirm compatibility with specific plates — Tel: +49 2822 7131930 · Email: info@metav-werkzeuge.com Technical Data Article number: M206.118 GTIN: 4054469183534 Weight: 0.2 kg Set contents: 4 pieces Total length: 32 mm Pad diameter: 50 mm Thread: M10 Facts Suitable for: M206.116 and M206.117 Category: Accessory eCl@ss: 27110390 Special features Low‑profile granite support feet Set for stable, four‑point support Compact design for measurement bases FAQ What thread do these granite plate feet use? The M206.118 granite plate feet from Metav IndustryLine use an M10 thread for mechanical attachment. Are the feet delivered ready for installation as a set? Yes, the M206.118 is supplied as a set of four feet, intended to provide four‑point support for granite plates and similar bases. What are the pad diameter and overall length? The support pads measure Ø50 mm and the components have a 32 mm overall length. Which measurement plates are explicitly compatible? Compatibility is documented for plates referenced as M206.116 and M206.117; the feet fit any application with an M10 mounting requirement. How much does the set weigh? The complete set is specified with a weight of 0.2 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500 x 400 mm Surface Plate, Cast Gray Iron, DIN 876/3 - Metav IndustryLine
A compact, high-stability layout solution combining grey cast iron construction with DIN 876/3 conformity and a practical 500 x 400 mm working surface; ideal where reproducible marking and inspection are required. Order the plate directly via Metav Werkzeuge or consult Metav's experts for specification support. Marking plate, 500 x 400 mm, grey cast iron — Metav IndustryLine, workshop marking and inspection plate The Marking plate, 500 x 400 mm, grey cast iron serves as a compact layout and inspection surface for workshop tables, jigs and small assembly benches. Grey cast iron construction, high stability DIN 876/3 conformity for workshop accuracy Compact 500 x 400 mm working surface Stable working surface for reproducible layout and inspection The robust grey cast iron body provides a vibration-damping foundation that keeps scribing and layout operations steady, resulting in cleaner lines and fewer reworks. A 500 x 400 mm plane combined with a 25 mm plate thickness yields a favourable stiffness-to-size ratio that benefits routine marking tasks and component inspection. The substantial mass (about 28 kg) reduces susceptibility to incidental movement, helping to maintain consistent contact between marking tools and the workpiece. Where repeatable layout or quick visual checks are needed, the heavy, damped surface directly contributes to measurable time savings and reduced scrap rates. Conformity with DIN 876/3 for workshop-grade accuracy Conforming to DIN 876/3 indicates the plate meets recognised workshop tolerances for flatness and surface quality, giving a dependable baseline for layout and comparative inspection. This standard classification clarifies where the plate sits in the accuracy spectrum: engineered for general industrial use rather than precision laboratory metrology, it is particularly suited to metalworking shops, toolrooms and assembly areas where practical reproducibility and durability matter most. The standardised specification simplifies procurement decisions and ensures interoperability with common shop practices and fixtures. Practical dimensions and handling for everyday workshop use The 500 x 400 mm working area offers a compromise between reach and manoeuvrability: large enough to accommodate typical small assemblies and fixtures, yet compact enough to sit comfortably on a bench or mobile stand. With an overall height of 65 mm, the plate integrates easily into existing workflows without elaborate mounting. The mass and footprint make placement straightforward while providing a stable platform for layout, marking, measurement aids or short-run assembly tasks. For operations that demand both reach and room efficiency, this size class minimises the number of specialised plates required. Durable construction and low-maintenance operation Grey cast iron is chosen for its wear resistance and ability to retain a stable surface under repeated use. The surface may be maintained by routine cleaning and light oiling to prevent surface oxidation; no specialised treatments are necessary for standard shop conditions. The plate’s material and design reduce the need for frequent replacement, supporting a cost-effective service life and lower lifecycle expenditure for workshop equipment provisioning. For buyers seeking a dependable workshop marking plane with uncomplicated upkeep, the cast-iron configuration represents a pragmatic choice. For application advice or to secure Metav IndustryLine quality for the workshop, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com / +49 2822 7131930 — for product matching and reliable supply from the Emmerich quality centre Technical data Article number: M206.205.1 GTIN: 4054469103341 Material: Grey cast iron Standard: DIN 876/3 Tariff number: 90178090 Facts Working surface: 500 x 400 x 25 mm Overall height: 65 mm Weight: 28 kg Special features Category: Measuring table Designed for workshop layout and marking Stable, vibration-damping cast-iron construction FAQ What accuracy level does this marking plate offer? The marking plate fulfils DIN 876/3, which corresponds to workshop-grade flatness and surface quality suitable for general layout and inspection tasks rather than laboratory calibration. Is the surface size suitable for laying out small assemblies and jigs? Yes. The 500 x 400 mm working surface provides a compact but practical area for small assemblies, fixture setups and routine comparative checks. What material is the plate made from and what are the benefits? Constructed from grey cast iron, the plate delivers high mass and damping for stable marking operations, with good wear resistance and straightforward maintenance such as cleaning and light oiling. How heavy is the plate and how does that affect use? The unit weighs approximately 28 kg, which supplies stability during layout tasks; the weight and dimensions make table-top placement convenient while reducing susceptibility to incidental movement. Can the plate be integrated into existing workshop fixtures? The plate’s compact footprint and 65 mm overall height allow straightforward placement on benches or integration with common workshop supports for layout and inspection duties. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500 x 500 mm Surface Scribing Plate, Gray Cast Iron, DIN 876/3 - Metav IndustryLine
Take advantage of the cast-iron construction, DIN 876/3 conformity and compact 500 x 500 mm footprint to stabilise layout and scribing tasks in a busy workshop; order directly via Metav Werkzeuge or consult the Metav team for tailored delivery. Scribing Plate M206.205 — Cast iron marking plate, 500 x 500 mm, DIN 876/3 (Metav IndustryLine) The Scribing Plate M206.205 is a compact cast-iron marking surface designed for routine shop-floor layout, inspection tasks and precise scribing on medium-sized components. Cast iron, DIN 876/3 accuracy Compact 500 x 500 mm footprint Stable 30 kg mass reduces vibration GTIN 4054469103334 for easy sourcing Dependable surface for accurate layout and scribing The cast iron surface delivers a flat, repeatable reference that supports marking and inspection work with consistent results. Manufactured to DIN 876/3, the plate offers a recognised level of flatness suitable for standard workshop tasks; this grade balances manufacturability with functional accuracy, making it well suited to assembly benches, marking stands and quality-control stations. The 500 x 500 mm working area provides a practical compromise between reach and rigidity, allowing medium-sized components to be positioned and scribed without excessive overhang. With an overall mass of 30 kg, the component dampens incidental shop-floor vibration, which helps to maintain visual and scribing accuracy during layout operations. Robust build for everyday workshop use Engineered from grey cast iron, the plate resists distortion over time and tolerates the mechanical demands of marking and light-fixture clamping. The plate’s nominal thickness of 25 mm contributes to profile stiffness across the surface while keeping handling feasible for standard storage and transport. The M206.205 presents clean, machined datum faces that simplify alignment to fixtures or angle plates; this practical geometry reduces setup time and supports repeatable placement of jigs. The product’s finish and mass are selected to deliver stable working conditions without the higher cost or fragility of laboratory-grade granite surfaces. Practical handling and integration into the workshop Compact dimensions and a moderate weight make the plate straightforward to incorporate into existing benches or measuring stands. The flat, machinable surface accepts scribing, centre-punching and light clamping operations; when used as a layout reference, the plate enables faster, more reliable transfer of patterns across batches. Identification by GTIN 4054469103334 and SKU M206.205 eases procurement and inventory management across central purchasing or toolrooms. For storage and transport, the plate fits standard workshop racks and can be handled safely by two operatives when repositioning is required. Contact Metav Werkzeuge today to discuss delivery options for the M206.205 scribing plate and to confirm suitability for the intended workshop application — Metav’s specialists at Emmerich can advise on logistics and integration into existing measurement setups. Technical Data Article number: M206.205 GTIN: 4054469103334 Tariff number: 90178090 Dimensions (L×W×H): 500 x 500 x 25 mm Overall height: 65 mm Weight: 30 kg Standard: DIN 876/3 Facts Working area: 500 x 500 mm Plate thickness: 25 mm Mass: 30 kg Catalogue SKU: M206.205 Special features Material: Grey cast iron Grade: DIN 876/3 surface tolerance Application: Marking, scribing, layout and inspection Category: Measuring table (Messtisch) Suitable for workshop and toolroom use FAQ What level of flatness does the plate provide? The M206.205 is manufactured to DIN 876/3, offering a workshop-grade flatness suitable for routine layout and marking operations. Is the plate suitable for clamping and light machining setups? Yes — the grey cast iron construction and 25 mm thickness give the plate the rigidity required for clamping, marking and light-fixture tasks in a production environment. How heavy is the scribing plate and how does that affect stability? At 30 kg, the plate’s mass delivers good vibration damping and a stable reference surface for accurate scribing and inspection. How can the plate be identified for reorders or inventory? Order and inventory using SKU M206.205 or GTIN 4054469103334 for exact identification. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Runout Tester With 170mm Measuring Height, 16mm Travel Of Movable Tips, Cast Frame - Metav IndustryLine
Take advantage of the combination of high repeatability, a 0.02 mm accuracy class and a rigid cast construction for reliable runout inspection across small to medium components; order the runout tester directly via Metav Werkzeuge or ask our consultants for specification matching. Runout tester M208.201 – 500 mm measuring range, 0.02 mm accuracy (Metav IndustryLine) The Runout tester M208.201 is a bench-mounted runout inspection device for radial and rotational accuracy checks on components up to 500 mm, designed for precision workshops and metrology tables. 500 mm measuring range Accuracy 0.02 mm for precise control Cast frame and centres for dimensional stability Movable centres with 16 mm travel Consistent measurement performance for quality control The instrument delivers a defined measurement environment that reduces variation in production testing. With a guaranteed accuracy of 0.02 mm, the bench enables traceable runout checks and consistent pass/fail decisions during incoming inspection or in-process control. The 500 mm measuring range covers typical shaft and rotor lengths encountered in toolrooms and small-component manufacturing, while the measuring height of 170 mm allows clearance for standard fixtures. Operationally, the device supports repeatable radial checks by securing the component between centres and rotating it under observation, which reduces rework and speeds throughput. Stable cast construction reduces setup uncertainty A heavy, rigid chassis improves reproducibility by lowering natural vibration and thermal sensitivity. The frame and tailstock components are cast for rigidity, providing a stable reference surface that maintains alignment under load; the unit’s mass (approx. 80 kg) further dampens external disturbances. The twin centres are machined to a 60° tip angle and 176 mm tip height to suit common shaft profiles, and the movable centre travel of 16 mm allows fine axial positioning without additional fixtures. Together, these features mean fewer adjustments before measurement and a lower risk of operator-induced deviation. Practical dimensions and integration into the workshop Designed for placement on a metrology table or dedicated measuring bench, the tester’s overall length of 920 mm and compact cross‑section (cross arm Ø10×150 mm, column Ø12×176 mm) make it straightforward to integrate into existing inspection stations. The unit supports standard rotational checks and can be combined with external measuring instruments for amplitude analysis or dial indicators for visual readout. The instrument is supplied as a robust bench device suited to production and maintenance environments where repeatability and mechanical stability are priorities; documentation and traceable identifiers assist in process control and inventory handling. Choose Metav IndustryLine for stable metrology hardware—contact Metav Werkzeuge in Emmerich for technical matching and fast supply of the M208.201 runout tester Technical data SKU: M208.201 GTIN: 4054469105352 ECLASS: 27201190 Label: Runout tester 500 mm measuring height 170 mm, 80 kg Facts Measuring range: 0–500 mm Measuring height: 170 mm Nominal accuracy: 0.02 mm Weight: 80 kg Overall length: 920 mm Movable centres travel: 16 mm Cross arm: Ø10×150 mm Column: Ø12×176 mm Special features Frame and centres made from cast for stiffness Measuring centres with 60° tip angle, height 176 mm Designed for bench-mounted runout inspection Category: Messtisch / metrology table application Manufacturer brand: Metav IndustryLine FAQ What measuring range does the tester cover? The runout tester covers a measuring range of 0–500 mm and a measuring height of 170 mm, suitable for small to medium shafts and rotors. What level of accuracy can be expected? The device provides a nominal accuracy of 0.02 mm, enabling repeatable radial measurements for quality control tasks. Which features ensure measurement stability? Stability is achieved through a cast frame and centres, substantial unit mass (~80 kg) and machined centre geometry, which together reduce vibration and setup drift. Is the tester suitable for a production environment? Yes—the construction and dimensional data (920 mm length, solid mounts) make it appropriate for workshop and production metrology stations. How is the product identified for ordering and inventory? Order and identify the unit by SKU M208.201 or GTIN 4054469105352; the unit is listed under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600 x 400 mm Scribing Plate, Grey Cast Iron, DIN 876/3 - Metav IndustryLine
Benefit from a rigid grey cast iron construction, a flat 600 x 400 mm working surface and the reproducible accuracy of DIN 876/3 — ideal for routine layout and inspection tasks; order via Metav Werkzeuge or contact our advisors for application advice. Metav IndustryLine Surface Plate 600 x 400 mm (grey cast iron, DIN 876/3) A Surface plate for workshop inspection and marking work, offering a stable reference surface for layout, scribing and general measurement tasks Grey cast iron construction, high stability 600 x 400 mm precision surface Surface grade per DIN 876/3 Robust 36 kg weight for vibration damping Reliable flatness for repeatable measurements The grey cast iron top provides inherent damping and wear resistance, creating a consistent flat reference surface for marking and inspection. Conformance to DIN 876/3 signals a workshop-grade accuracy suitable for everyday measurement tasks where repeatability matters. The 600 x 400 mm surface gives a practical balance between reach and rigidity, so routine checks, scribing and comparative measurements remain stable without excessive equipment or set-up time. This focus on mechanical stability reduces rework and shortens setup cycles in production environments. Workshop-friendly size and handling With a nominal 25 mm top thickness and a compact footprint, the plate sits easily on benches or measuring tables while preserving sufficient stiffness for general shop use. The moderate mass of 36 kg enhances vibration damping, so layout lines and transferred marks are less prone to distortion during hand operations. The plate's dimensions make it well suited for fixture alignment, small jig checks and component inspection where a precise, unobstructed surface is required; handling is practical for one or two technicians using standard lifting aids. Maintenance, longevity and practical advantages Grey cast iron requires only straightforward care to keep the surface serviceable: light cleaning, rust prevention and occasional light lapping when wear becomes visible. The material's natural damping and hardness mean long service life under normal workshop conditions, keeping calibration intervals manageable. As a readily available metrology accessory from a recognised line, the unit integrates with existing measuring workflows and supports efficient layout and control processes without specialised training. For application-specific guidance or to secure a Metav IndustryLine surface plate for your workshop, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and supply options. Technical data Article number: M206.206.1 GTIN: 4054469103365 Material: Grey cast iron Standard: DIN 876/3 Category: Messtisch / Measuring table Customs tariff: 90178090 Facts Surface dimensions: 600 x 400 mm Thickness: 25 mm Overall height: 65 mm Weight: 36 kg Special features Robust cast-iron construction Workshop accuracy class DIN 876/3 Suitable for marking, scribing and general inspection tasks Compact format for bench or table use SKU: M206.206.1 FAQ What level of accuracy does this surface deliver? The plate conforms to DIN 876/3, providing workshop-grade flatness suitable for routine inspection and layout tasks with reproducible results. Is the plate suitable for fixture alignment and small jig checks? Yes, the Metav IndustryLine surface plate and its 600 x 400 mm surface are well suited to fixture alignment, jig checks and similar bench-level operations. How should the surface be maintained to ensure longevity? Regular light cleaning, application of a thin rust-preventive film and occasional light lapping when wear appears will preserve the plate's service life. Can the plate be used directly on a workbench or does it require a stand? The compact dimensions and 25 mm thickness allow comfortable placement on a stable bench or measuring table; for prolonged use a dedicated support frame improves ergonomics. What does the plate's weight contribute to measurement quality? The 36 kg mass increases vibration damping and resistance to incidental movement, improving stability for manual scribing and comparative measuring. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x500mm Scribing Plate, Bottom Recess 570x460x40mm, Cast Iron, DIN 876/3 - Metav IndustryLine
Take advantage of the combination of robust grey cast iron construction, DIN 876/3 flatness and a compact 600 × 500 mm working surface for reliable marking and layout work; order directly via Metav Werkzeuge or consult the team for specification guidance. Scribing plate 600 x 500 mm — Grey cast iron surface plate, DIN 876/3, Metav IndustryLine The Scribing plate 600 x 500 mm provides a stable reference surface for marking, inspection and layout tasks in machine shops and toolrooms, combining a compact footprint with the rigidity required for repeatable workshop measurements. Grey cast iron body, robust and vibration-damping Flatness to DIN 876/3 for reliable layout work Overall size 600 x 500 mm with compact footprint Weight 40 kg for stable clamping and measurement Precision that shortens setup times and reduces rework The plate’s DIN 876/3 specification ensures a verified degree of flatness suitable for routine layout and inspection tasks, which reduces the need for repeated adjustments. A confirmed reference surface speeds up scribing and transfer measurements because components and tooling sit on a predictable plane; this contributes directly to process efficiency and fewer scrap parts. The combination of a sizeable working surface with consistent geometry supports faster, more reliable alignment in the workshop. Stable cast-iron build for reproducible results Constructed from grey cast iron, the component dampens vibration and resists wear, so readings and markings remain consistent over time. The unit’s mass—40 kg—provides inherent stability for clamping and contact measuring operations, lowering the risk of movement during scribing or fixture checks. The plate’s overall geometry (top 600 × 500 mm; underside 570 × 460 × 40 mm) and a total height of 90 mm contribute to a rigid support that keeps tolerances reproducible across multiple parts or batches. Designed for everyday workshop use and easy integration The compact format and standardised dimensions permit straightforward placement on benches, measuring tables or workstations without complex fixturing. The reduced need for additional stabilisation or constant readjustment translates into saved operator time and a more efficient workflow. Where a durable, readily available reference surface is required, this cast-iron plate serves as a practical solution for marking, comparative inspection and layout tasks in metalworking environments. Suitable applications and quality assurance in practice Ideal for layout, scribing and basic inspection in metal workshops, toolrooms and maintenance departments, the plate is a workshop-grade reference for everyday duties. The Metav IndustryLine designation signals supply through a distributor that emphasises consistent stock and a European quality filter; this supports dependable procurement and predictable lead times for production planning. The plate’s tariff code and GTIN are available for logistics and inventory management. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine scribing plate into existing workflows; enquiries may be sent to info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M206.206 GTIN: 4054469103358 Category: Measuring table (Messtisch) Tariff code: 90178090 Facts Material: Grey cast iron Standard: DIN 876/3 Top dimensions: 600 × 500 × 25 mm Base footprint: 570 × 460 × 40 mm Overall height: 90 mm Weight: 40 kg Special features Robust vibration damping Compact, bench-friendly format Suitable for marking, scribing and layout work ECLASS: 21170605 FAQ What degree of flatness can be expected from this plate? The scribing plate supplied under SKU M206.206 conforms to DIN 876/3, providing a workshop-level flatness suitable for routine layout and inspection tasks. Is the plate suitable for use as a reference on a measuring table? Yes. The grey cast iron construction and the plate’s mass (40 kg) make the unit appropriate as a stable reference on measuring tables and benches for comparative checks and scribing operations. Can the plate be clamped or used with fixtures? The underside footprint (570 × 460 × 40 mm) and the overall geometry permit secure clamping and integration with standard workshop fixturing; the mass assists in maintaining position during marking. Which materials and tasks is the plate intended for? The plate is intended for general layout, marking and inspection tasks in metalworking and toolmaking environments where a durable, flat reference surface is required. How does the Metav IndustryLine designation affect procurement? Products from Metav IndustryLine, such as the scribing plate M206.206, are supplied through Metav Werkzeuge’s European distribution channel, offering consistent availability and logistical transparency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
610x480x470mm Floor Cabinet With Three Drawers, Lock And Mounting Accessories - Filetta
Organised, secure storage with three drawers and an included lock improves workshop efficiency; the compact footprint (610 × 480 × 470 mm) is tailored to measuring benches. Order the Filetta MS131.113 via Metav Werkzeuge or contact our consultants for specification guidance. MS131.113 under-table cabinet — three-drawer unit by Filetta, compact footprint and secure locking The MS131.113 is an under-table cabinet designed for measuring benches and workshop use, providing secure, organised storage for tools and accessories close to the work surface Three drawers for organised tool storage Lock and fixings included for secure mounting Compact dimensions 610 × 480 × 470 mm Keep tools organised and within reach The under-table storage module offers three drawers sized to keep measuring tools and fixtures organised, reducing time spent searching for equipment and supporting continuous workflows. With a compact footprint of 610 × 480 × 470 mm, the unit fits neatly beneath a bench or alongside a measuring table, conserving floor space while maintaining immediate access to essentials. The layout supports clear separation of items, which simplifies calibration routines and daily checks. Designed for measuring benches and precision workflows Engineered for integration with a measuring bench, the cabinet aligns with typical workshop setups used in inspection and quality-control areas. The configuration helps preserve the order of gauges, stands and small instruments used during measurement tasks, so inspection cycles proceed more smoothly. By positioning storage at the bench, handling times are reduced and work routines become more efficient, contributing to reliable throughput in production or lab environments. Secure mounting and practical delivery contents Delivery includes a lock and the necessary fixings, enabling secure attachment to the bench or floor and providing theft protection for valuable instruments. The included fixings simplify installation and remove the need for additional mounting purchases, accelerating commissioning. The locking feature supports safe storage of calibrated items between shifts, helping maintain traceability and protecting investment in precision equipment. For secure, compact workshop storage choose the Filetta MS131.113 under-table cabinet—contact Metav Werkzeuge for ordering assistance or technical advice and benefit from local supply and expertise from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS131.113 Product: Under-table cabinet Brand: Filetta Dimensions: 610 × 480 × 470 mm Accessories included: Lock and fixings Special feature: 3 drawers Category: Measuring table (Messtisch) Facts Number of drawers: 3 Dimensions (W × D × H): 610 × 480 × 470 mm Special features Lock included Fixings included for mounting Designed for use with measuring benches (Messtisch) FAQ Is this cabinet suitable for mounting under a measuring bench? Yes. The Filetta MS131.113 under-table cabinet is designed to fit standard measuring benches and to provide convenient storage beneath the work surface. What are the exact dimensions of the unit? The cabinet measures 610 × 480 × 470 mm (width × depth × height), making it compact enough for most inspection and workshop tables. Does the delivery include a lock and mounting parts? Yes. Delivery of the MS131.113 includes a lock and the required fixings for secure mounting. How many drawers are provided and how does that help workshop organisation? The unit offers three drawers, which support separation of tools and gauges to speed up inspection routines and reduce handling time. Can the cabinet secure calibrated instruments between shifts? The integrated lock and sturdy construction of the Filetta MS131.113 enable secure storage of calibrated items, helping to protect instruments and maintain traceability. Filetta: Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
630 x 400 x 100 mm Granite Plate Grade 0, DIN 876/0 - Metav IndustryLine
Combine DIN 876/0 Grade 0 flatness, a dark granite construction and a compact 630 x 400 x 100 mm footprint to provide a stable, low‑maintenance reference surface for inspection and layout tasks. Order the granite plate directly via Metav Werkzeuge or consult the Metav team for application advice. Granite plate 630 x 400 x 100 mm, Grade 0 — Surface plate (Metav IndustryLine) A Granite plate 630 x 400 x 100 mm Grade 0 designed as a stable reference surface for precision inspection, layout and assembly work in machine shops and quality control environments Grade 0 flatness to DIN 876 Dark granite surface for thermal stability Size: 630 x 400 x 100 mm Mass approx 85 kg, plate only Reliable flatness for repeatable measurements The surface offers Grade 0 flatness (DIN 876/0), providing a dependable reference for tasks where reproducibility matters. Grade 0 indicates one of the tighter tolerances in the standard, which helps to reduce measurement uncertainty during inspection and assembly. The granite base combines inherent hardness with low thermal expansion, ensuring the reference plane remains stable across typical workshop temperature variations and minimises the need for frequent re‑level checks. Practical size and stability for medium workshop applications With external dimensions 630 x 400 x 100 mm and a mass of approximately 85 kg, the plate balances reach and rigidity for routine metrology tasks. The weight and stone density contribute to vibration damping and resistance to local deformation when placing moderate‑weight components. This geometry is well suited to bench‑level inspection, layout work and component alignment where a compact, yet stiff, reference surface is required. Delivery is as the inspection plate only — no stand is supplied — allowing integration with existing supporting frames or workbenches. Low maintenance and long service life in production environments Dark granite resists corrosion and retains its surface quality with minimal upkeep; routine cleaning and protection from sharp knocks preserve the working face. The material's wear characteristics make it suitable for frequent use as an inspection reference, while the neutral surface reduces burr or residue adherence. As a robust measuring surface, the plate supports a streamlined workflow in quality control, offering a consistent plane for comparative measurements and visual layout without complex handling procedures. Choose the Metav IndustryLine granite plate for Grade 0 accuracy and contact Metav Werkzeuge in Emmerich for tailored delivery and technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M206.105 GTIN: 4054469102962 Material: dark granite Dimensions: 630 x 400 x 100 mm Mass: 85 kg Standard: DIN 876/0 Note: control plate, without stand Facts Dimensions (L x W x H): 630 x 400 x 100 mm Mass: 85 kg Tariff code: 68022300 Flatness grade: 0 (DIN 876) Special features Dark granite for thermal stability and damping Designed as inspection/control surface only Delivery without stand Category: Measuring table FAQ What flatness tolerance does this surface plate provide? The plate is specified as Grade 0 flatness in accordance with DIN 876/0, giving a high‑precision reference plane for inspection tasks. Is a stand or frame included with the plate? The delivery covers the inspection plate only; the Granite plate 630 x 400 x 100 mm Grade 0 is supplied without a stand so it can be mounted on existing supports or bespoke frames. What are the exact dimensions and weight of the plate? The Granite plate measures 630 x 400 x 100 mm and has a mass of approximately 85 kg, suitable for bench mounting and medium‑size components. What material is used for the plate and why is it chosen? Dark granite is used for its thermal stability, hardness and natural damping; the material supports consistent measurement results and long service life. Can the plate be used for layout and assembly as well as inspection? Yes, the stable, flat surface makes the plate suitable for inspection, layout and assembly tasks where a reliable reference plane is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
630mm x 630mm x 100mm Granite Surface Plate Grade 0, DIN 876/0 - Metav IndustryLine
The combination of Grade 0 flatness and a heavy, stable construction ensures reproducible reference measurements for demanding inspection tasks; its 630 x 630 x 100 mm surface and 155 kg mass also provide excellent vibration damping and thermal stability. Order the granite surface plate directly via Metav Werkzeuge or consult the Metav team for delivery and handling options. Granite surface plate 630 x 630 x 100 mm Grade 0 — precision reference surface for inspection and layout Granite surface plate 630 x 630 x 100 mm Grade 0 is a control plate designed as a flat, thermally stable base for precision inspection, layout and measurement work in machine shops and metrology labs Grade 0 flatness (DIN 876/0) Dark granite for thermal stability Large bearing surface 630 x 630 mm Heavy mass for vibration damping Reliable reference surface that reduces measurement uncertainty A Grade 0 reference surface certified to DIN 876/0 offers a predictable baseline for length and geometry checks. The dark granite composition contributes to low thermal expansion and consistent surface characteristics, which reduces drift during extended measuring tasks. For quality control and assembly checks, the stable topography of this inspection plate minimises the need for repeated re-calibration and supports reproducible results over repeated measurement cycles. This makes the plate especially suitable where stray thermal influences or shop-floor vibration could otherwise compromise readings. Mass and geometry that improve process efficiency With nominal dimensions of 630 x 630 x 100 mm and a mass of 155 kg, the plate provides a substantial contact area and inherent damping of ambient vibration. The increased mass helps stabilise small workpieces during layout and inspection, reducing micro-movements that would otherwise cause measurement noise. The compact footprint is balanced to suit bench or table integration while offering sufficient surface for fixtures and modular set-ups. Note: delivery comprises the control plate only — the item is supplied without a stand so mounting and handling arrangements should be planned in advance. Built for shop use and backed by Metav reliability This inspection surface is a practical tool for machine shops, toolrooms and inspection laboratories seeking durable, low-maintenance metrology equipment. Produced within the Metav IndustryLine offering, the plate benefits from the company’s European quality control and logistical presence in Emmerich, which helps ensure dependable availability and consistent product checks. Using a standardised Grade 0 reference reduces process variability and supports faster decision-making in production and QA workflows, contributing to lower scrap rates and improved throughput. For a tailored quote, handling advice or to reserve the Granite surface plate through Metav Werkzeuge, please contact the Metav team in Emmerich for delivery options and handling arrangements Technical data Article number: M206.106 GTIN: 4054469102993 Eclass: 21170603 Tariff code: 68022300 Facts Dimensions: 630 x 630 x 100 mm Weight: 155 kg Flatness grade: Grade 0 (DIN 876/0) Special features Material: dark granite Delivery note: control plate only, without stand Intended use: inspection and layout reference surface FAQ Is the plate delivered ready for use? The plate is supplied as a finished control surface; it is delivered without a stand, so a suitable support or table is required for immediate use. What does Grade 0 mean for measurement work? Grade 0 denotes a very high flatness tolerance according to DIN 876/0, allowing the plate to serve as a primary reference for precise inspection and layout tasks. Can the plate be used for layout and clamping of fixtures? Yes, the robust dark granite surface is suitable for fixture set-up and layout work where a stable, low‑expansion reference plane is required. How does the mass of the plate affect stability? The 155 kg mass increases damping of ambient vibrations and reduces micro-movements, improving repeatability during sensitive measurement operations. Which product code should be referenced for ordering or documentation? Please refer to SKU M206.106 and GTIN 4054469102993 when specifying the granite surface plate in orders or technical documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
630x400–1000x630mm Adjustable Three-Point Frame For Gauge Plates, Height 810mm - Metav IndustryLine
Take advantage of a rigid, low-vibration support that adapts to multiple plate formats and speeds up inspection set-up; the combination of three adjustable main support points and adjustable levelling screws delivers reproducible measurements with straightforward alignment — order directly via Metav Werkzeuge or contact our consultants for tailored advice. Flexible stand for measuring and inspection plates »M206.108.2« — three adjustable supports, solid square‑tube frame (Metav IndustryLine) The Flexible stand for measuring and inspection plates is a workshop-grade frame designed to carry and align inspection plates for measuring and quality control tasks in production and maintenance environments. Three adjustable main support points Solid square-tube construction Adjustable levelling screws Fits 630x400 to 1000x630 mm plates Stable support for reproducible inspection results A solid square‑tube frame provides the torsional rigidity required for reliable metrology setups. With a mass of 28.5 kg, the frame resists unwanted vibration and displacement during probing or manual checks, while its nominal overall height of 810 mm gives a practical working elevation for benches or trolleys. The sturdy construction reduces the risk of deflection under load, which improves repeatability of measurements and helps maintain the reference condition of mounted plates and fixtures. Fast adaptation to different plate formats The design includes three adjustable main support points that can be repositioned to match the support pattern of common inspection plates. This flexibility allows one frame to accommodate plate dimensions from 630x400 mm up to 1000x630 mm, cutting changeover time and avoiding the need for multiple dedicated stands. The movable supports ensure that contact occurs beneath the plate’s primary support zones, preserving plate flatness and ensuring consistent results during dimensional checks. Precise levelling for accurate alignment Integrated levelling screws on the feet permit fine adjustment of the frame to achieve exact horizontal alignment. This mechanical levelling capability simplifies setup before measurement and reduces systematic error originating from tilt. The combination of coarse support positioning and fine foot adjustment means the frame delivers both quick configuration and the small corrections necessary for reproducible measurements in a routine inspection workflow. Workshop-ready design that eases handling and integration Constructed from massive square‑tube material and finished for industrial use, the frame is heavy enough to be stable yet compact enough for workshop handling. It accepts commonly used inspection plates and mates easily with metrology benches or mobile inspection trolleys. The open design provides unhindered access for gauges, calipers and digital probes while the robust feet and adjustment range make it simple to integrate into existing quality-control processes. For tailored metrology solutions based on Metav IndustryLine components, contact Metav Werkzeuge for product matching and procurement: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M206.108.2 GTIN: 4054469184883 Manufacturer: Metav IndustryLine Overall height: 810 mm Weight: 28.5 kg Dimensions: 614 x 409 x 710 mm Compatible plate sizes: 630x400, 630x630, 800x500, 1000x630 mm Special features Three movable main support points for different plate sizes Feet with adjustable levelling screws Massive square-tube construction Intended for measuring and inspection plates FAQ What plate sizes can the stand accommodate? The stand accommodates inspection plates with formats from 630x400 mm up to 1000x630 mm; the three movable support points make these configurations possible with the Metav IndustryLine frame (SKU M206.108.2). How is levelling achieved on uneven floors? Fine levelling is provided by adjustable levelling screws on the feet; these permit precise horizontal alignment for reproducible measurements when using the Metav IndustryLine measuring stand. Is the frame sturdy enough for shop-floor use? Yes — the frame’s massive square‑tube construction and a weight of 28.5 kg provide stability and low susceptibility to vibration, making it suitable for routine inspection tasks and workshop integration. Can the support points be repositioned without tools? The main support points are designed to be repositioned for different plate sizes; the mechanism allows practical reconfiguration to match plate support patterns and speed up changeovers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
700mm Motorised Test Stand With Portable Colour Touch Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of motorised control, ISO 17025 traceability and seamless data export to speed up testing cycles while keeping results reproducible; order supplies or request tailored advice from Metav Werkzeuge for efficient integration into existing metrology workflows. Test stand — Motorised test stand with 1,000 N capacity and colour touchscreen (Microtech Metrology) The Test stand is a motorised testing rig for precise force and displacement checks, offering a 0–700 mm travel range and a portable 2.4" colour touchscreen for on-bench operation. Motorised travel control, smooth and reproducible 1,000 N maximum load capacity Colour 2.4" touchscreen portable display Wireless and USB data output for easy logging Traceable accuracy for routine quality checks The motorised rig delivers repeatable force application and a fine reading resolution of 0.001 N, making it suitable for routine quality control and R&D work where small differences matter. Supplied calibrated under ISO 17025, the unit arrives with a calibration certificate that documents traceability and reduces administrative overhead during audits. This combination of documented accuracy and fine resolution supports reliable pass/fail decisions and consistent sample comparison. Fast data capture and straightforward integration Equipped with Wireless and USB outputs and a colour 2.4" touchscreen, the device simplifies measurement logging and process documentation. Digital readout and export options reduce manual transcription, lowering the risk of human error while enabling immediate transfer to laboratory information systems or spreadsheet-based workflows. The portable display supports on-bench checks and facilitates data review without interrupting the test sequence. Motorised motion for consistent throughput Motorised travel removes variability caused by manual adjustment, so each cycle follows the same speed and position profile — a clear benefit for comparative testing and durability routines. The controlled motion increases throughput without sacrificing measurement integrity, translating into shorter test times for repetitive tasks and more reliable statistical results from production samples. Built for workshop and laboratory environments Designed for industrial metrology use, the unit combines a compact footprint with robust mechanics and compatibility with profile-measuring setups. The travel span of 0–700 mm covers a broad range of components while maintaining stiffness for reproducible readings. The portable display and wireless connectivity make the system adaptable across lab benches and inspection stations, supporting both hands-on technicians and automated data acquisition. Contact Metav Werkzeuge for tailored advice on integrating Microtech Metrology motorised test stands into existing measurement chains, and to obtain the ISO 17025 calibration certificate and data-export options — email info@metav-werkzeuge.com or call +49 2822 7131930 for personal consultation Technical data Article number: 278170108 GTIN: 4061905460135 Manufacturer: Microtech Metrology Facts Measurement range: 0–700 mm Maximum load: 1,000 N Reading resolution: 0.001 N Display: Colour 2.4" touchscreen Data output: Wireless, USB Type: Motorised Special features Portable display included Digital operation Supplied calibrated to ISO 17025 Suitable for 2D profile measurement workflows Compact footprint for bench use FAQ Is the calibration certificate included with the test stand? Yes. The Microtech Metrology test stand is delivered fully calibrated and includes an ISO 17025 calibration certificate documenting traceability for the unit (SKU 278170108). What data interfaces are available for automated logging? The unit offers Wireless and USB outputs for direct export of measurement data to PCs or networked acquisition systems. What is the maximum force the device can apply? The motorised system supports a maximum load of 1,000 N, suitable for a wide range of component force tests. Which measurement range does the system cover? Travel covers 0–700 mm, providing sufficient reach for most small to medium-sized components used in laboratory and workshop contexts. Can the unit support repeated automated cycles for production testing? Yes. Motorised advancement ensures repeatable motion profiles that are suitable for comparative and cyclical testing in production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
800 x 500 mm Surface Plate, Cast Iron, DIN 876/3 - Metav IndustryLine
Take advantage of a rigid, workshop-ready base that combines grey cast iron construction with the flatness requirements of DIN 876/3 to ensure repeatable layout and inspection results; the 800 x 500 mm measuring area and 25 mm plate thickness deliver stability for routine marking and inspection tasks. Order directly via Metav Werkzeuge or consult the team for application advice. Marking plate M206.207 — grey cast iron surface plate, 800 x 500 mm The Marking plate M206.207 is a workshop-grade surface plate designed for layout, scribing and basic inspection duties in machine shops and fabrication areas. Grey cast iron to DIN 876/3 Stable 800 x 500 mm measuring area 25 mm thick top for rigidity Suited to marking, scribing and inspection A stable base that improves repeatability and throughput A grey cast iron construction provides high mass and damping, which reduces vibration during marking and inspection operations and contributes to consistent results. The adherence to DIN 876/3 signals a defined flatness class, so flatness characteristics are predictable when used as a reference plane. By choosing a heavy, rigid plate with a 25 mm top section, shops gain a repeatable datum that shortens setup time and reduces rework, supporting a more efficient production flow. Precision-oriented design that supports everyday workshop tasks The 800 x 500 mm measuring area gives a practical balance between reach and manageability for typical components and jigs. The plate’s planarity and mass help maintain contact stability with scribers, height gauges and small inspection tools; this ensures layout lines and reference marks stay accurate. With an overall robustness that suits daily use, the workpiece handling cycle is simplified and accuracy is preserved across repeated measurements. Practical handling and installation considerations for the workshop Although the plate is substantial at approximately 50 kg, its dimensions and thickness make it straightforward to position on benches or stands designed for inspection fixtures; the mass becomes an asset for stability rather than a handling hindrance. Where frequent relocation is necessary, use of appropriate lifting aids or two-person handling is recommended to protect accuracy and avoid damage. The plate’s format suits standard workshop workflows for marking, scribing and quick comparative checks. Long-term reliability and compatibility with shop processes A cast-iron surface plate provides a durable reference plane that tolerates normal workshop use when cared for correctly: keep surfaces clean, avoid point loads, and use soft supports if storing other parts on the plate. Conformity with recognised standards simplifies integration into existing inspection routines and documentation. For organisations seeking confidence in supply and traceability, Metav’s distribution provides consistent stock and logistical reliability for repeat purchases. Contact Metav Werkzeuge for application guidance or to arrange supply of the Marking plate M206.207 and complementary inspection accessories Technical data Article number: M206.207 GTIN: 4054469103372 ECLASS: 21170605 Customs tariff: 90178090 Label: Tuschierplatte, 800 x 500 mm aus Grauguss Category: Messtisch Facts Dimensions: 800 x 500 x 25 mm Total height: 100 mm Weight: 50 kg Standard: DIN 876/3 Special features Material: Grey cast iron Application: Marking, scribing, basic inspection Story trigger: messplatten FAQ What flatness class does the plate meet? The plate is supplied to the flatness characteristics of DIN 876/3, which provides a reproducible reference plane for workshop layout and basic inspection tasks. Is the marking plate suitable for precision inspection and scribing? Yes, the Marking plate M206.207 is intended for marking, scribing and comparative checks; its grey cast iron construction and 25 mm thickness provide the rigidity required for reliable layout work. How large is the usable measuring area and what are the handling considerations? The usable surface measures 800 x 500 mm. At roughly 50 kg, the plate is robust; appropriate handling aids or two-person lifts are recommended to protect accuracy during relocation. Can the plate be used as a base for height gauges and scribers? Yes, the plate functions as a stable datum for height gauges, scribers and light inspection fixtures in workshop environments when normal care and handling are observed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision and stability for reliable measurement results
A measurement table provides the essential reference surface for precise dimensional inspection in machine shops, metalworking and quality assurance. Selected and configured correctly, a measurement table ensures consistent flatness, repeatability and a stable basis for comparative measurement tasks.
How the system works and where it’s indispensable
The primary role of a measurement table is to act as a flat, stable datum for handheld gauges and fixed measuring stands. Typical constructions include granite plates, cast-iron plates, and versions prepared for integration with a height gauge or a dedicated stand. In inspection rooms and workshops a well-chosen metrology table reduces measurement scatter by isolating the part from bench vibration and by providing a reliably machined reference plane for both manual and semi-automatic checks.
Tangible benefits that improve daily production
- Increased measurement repeatability by providing a stable reference surface, reducing rework and scrap.
- Faster setup and alignment when used with a height gauge or measuring stand, cutting throughput time for routine checks.
- Robustness and wear resistance from materials such as granite plates or cast-iron plates, extending service intervals.
- Compatibility with common inspection tools, making the inspection table a versatile centrepiece for quality workflows.
Why Metav is the practical choice for workshops and industry
Metav combines industry expertise with wide availability, making precision accessible without compromising quality. From its Emmerich location Metav acts as a quality filter for the European market, supporting over 48,000 customers and offering more than 250,000 products for measurement and workshop equipment. That breadth ensures the right measurement table solution is available alongside complementary metrology accessories, delivered with straightforward order handling and dependable stock management.
Quick summary
A properly specified measurement table — whether a granite plate, a cast-iron plate or a version adapted for a height gauge — is a foundational investment for accurate, efficient inspection. Metav offers the range and expertise to match the right table to the application.
FAQ
Which material is best for my measurement table?
Choice of material depends on use: granite plates are favoured for thermal stability and wear resistance, while cast-iron plates provide cost-effective rigidity. Select a measurement table material that suits your workshop environment and inspection frequency.
Can a measurement table be used with a height gauge?
Yes. Most measurement table designs are compatible with a height gauge or measuring stand; look for tables prepared with mounting or clamping options to secure the gauge and maintain repeatable set-ups.
How should I maintain a measurement table to preserve flatness?
Regular cleaning, avoidance of point impacts and controlled storage conditions help preserve the reference surface. For critical processes, schedule inspection and calibration of the inspection table according to internal quality procedures or industry standards.
What makes Metav a reliable supplier for metrology tables?
Metav combines decades of sector knowledge with a comprehensive product range from Emmerich, offering consistent quality control, broad selection and supply reliability for the workshop or production floor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com