Precision surface plates for exact measurement and inspection
A precision surface plate provides a stable reference for dimensional inspection and layout, enabling accurate measurement and improved quality control across metalworking and engineering shops. These granite and cast-iron surface plates and their complementary inspection tables are used with height gauges and stands to support repeatable measurements on machined components, delivering flatness and rigidity that reduce setup time and measurement error. Designed for calibration and inspection tasks, the systems enhance process reliability when checking tolerances and part geometry.
1000 x 630 x 100 mm Granite Surface Plate Grade 0, DIN 876/0 - Metav IndustryLine
Benefit from Grade 0 flatness and a massive dark granite construction that delivers reproducible reference measurements and exceptional long‑term stability; the plate is supplied as a control surface only, without a stand. Order the granite surface plate directly via Metav Werkzeuge or ask our consultants for delivery and handling advice. Granite surface plate, 1000 × 630 × 100 mm, Grade 0 — Surface plate for precision inspection A Granite surface plate, 1000 × 630 × 100 mm Grade 0 provides a thermally stable, wear‑resistant reference surface for inspection, layout and assembly tasks in machine shops and tool rooms Grade 0 accuracy (DIN 876/0) Dark granite, wear‑resistant surface 1000 × 630 × 100 mm working area Supplied as plate only, no stand Reliable reference for reproducible inspection A Grade 0 surface on a heavyweight granite slab forms the basis for consistent dimensional control and layout work. The specification Grade 0 (per DIN 876/0) defines the flatness class and ensures that the reference surface meets tight tolerances suitable for high‑precision inspection. With a compact footprint of 1000 × 630 × 100 mm, the slab combines accessibility with a stable measuring plane, while the mass of the component contributes to vibration damping and positional stability during measurements. Built for durability and low maintenance The use of dark granite as the construction material gives the slab long service life under regular workshop conditions. The surface resists wear from contact with gauge blocks and fixtures, reducing the need for frequent resurfacing and allowing inspections to remain reliable over time. Routine cleaning and gentle care preserve the measurement qualities, helping to lower total cost of ownership through extended intervals between maintenance operations. Workshop handling and practical notes The slab is delivered as a control plate only — no stand is included — so planning for a suitable support frame or measuring table is required. With a considerable mass, safe handling and transport arrangements should be arranged in advance to avoid damage and ensure personnel safety. The plate is intended for use as a precision reference in machine shops, quality control areas and toolrooms where stable, reproducible surfaces are required for setting up, inspecting and aligning components. For consistent, workshop‑ready reference surfaces choose the Metav IndustryLine Grade 0 granite surface plate and contact Metav Werkzeuge in Emmerich for delivery coordination and handling guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M206.108 Label: Granite surface plate, 1000 x 630 x 100 mm Grade 0 GTIN: 4054469103051 Tariff number: 68022300 Facts Dimensions: 1000 × 630 × 100 mm Weight: 210 kg Grade: 0 (DIN 876/0) Special features Material: dark granite Standard: DIN 876/0 Delivery: plate only, without stand Category: Measuring table FAQ What flatness standard does this surface plate meet? The surface plate fulfils Grade 0 tolerances according to DIN 876/0, offering a high‑precision reference suitable for demanding inspection tasks. Is a stand included with the plate? The plate is supplied as a control surface only and is delivered without a stand; the SKU for this item is M206.108 from Metav IndustryLine. How heavy is the granite plate and what handling is required? The slab weighs 210 kg; appropriate lifting equipment and transport planning are recommended to ensure safe handling and accurate placement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000 x 800 mm Surface Plate Cast Iron DIN 876/3, 150 kg - Metav IndustryLine
Benefit from a stable, large working surface combined with certified flatness and industrial robustness for reliable marking and layout work; the 1000 x 800 mm grey cast iron marking plate provides a durable foundation and consistent reference, enabling smoother workshop workflows — order the item via Metav Werkzeuge or consult our specialists for application advice. Marking plate, 1000 x 800 mm, grey cast iron (DIN 876/3) — Metav IndustryLine A Marking plate, 1000 x 800 mm, designed as a rigid grey cast iron surface for precise workshop marking, layout and light inspection tasks in machine shops and manufacturing environments Grey cast iron construction, high mass for stability Conforms to DIN 876/3 flatness standard Generous 1000 x 800 mm working surface Robust 150 kg build for vibration damping Precision and repeatability for layout and scribing This heavy-duty marking plate is engineered to deliver consistent results where dimensional reliability matters. The 1000 x 800 mm working area combined with a grey cast iron body provides substantial mass and damping, reducing the influence of environmental vibration on manual layout tasks. Conformity to DIN 876/3 ensures a reliable baseline for flatness and parallelism, which translates into fewer setup iterations and lower rework rates for production and repair jobs. The plate’s solidity supports stable clamping and repeated scribing without loss of reference. Practical benefits that speed up workshop processes A stable reference surface shortens process times by simplifying line transfer, scribing and checking operations. The combination of a large, flat surface and a robust construction improves handling of assemblies and subcomponents during marking-out or light inspection. The plate’s mass (approx. 150 kg) increases contact stability and helps maintain the flatness required for accurate layout. For toolrooms and maintenance departments, this means faster, more reliable marking operations and improved downstream machining consistency. Durability, care and workplace integration Constructed from long-lasting grey cast iron, the plate resists routine workshop wear and offers inherent vibration damping for manual tasks. Regular cleaning with non-abrasive agents and protection from corrosive environments preserves the measuring surface; light reconditioning or lapping is possible where required to extend service life. The unit’s dimensions and weight make it a permanent or semi-permanent fixture on the shop floor; it integrates well with layout stands, height-adjustable benches or dedicated stands to create an ergonomic marking station that supports precise, repeatable work. For stable, certified marking and layout surfaces, request the Metav IndustryLine marking plate (SKU M206.208) via Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability for specific applications Technical data SKU: M206.208 GTIN: 4054469103396 Tariff number: 90178090 Category: Messtisch Facts Dimensions: 1000 x 800 x 25 mm Overall height: 100 mm Weight: 150 kg Special features Material: grey cast iron Standard: DIN 876/3 Label: marking plate, 1000 x 800 mm, grey cast iron FAQ What materials is this plate made from and why is that important? The marking plate M206.208 is made from grey cast iron, a material chosen for its high mass and vibration-damping properties; this improves stability during scribing and layout work and helps maintain flatness over time. Is the flatness standard specified for industrial use? Yes, the plate conforms to DIN 876/3, offering a defined flatness level suitable for many workshop marking and inspection tasks where a reliable reference surface is required. Can the plate be used as a reference for small assembly checks? The Metav IndustryLine marking plate (SKU M206.208) is suitable as a stable reference for assembly checks and layout work on medium-sized components thanks to its 1000 x 800 mm surface and heavy construction. How should the surface be maintained to preserve accuracy? Routine care for the grey cast iron surface involves cleaning with mild, non-abrasive agents, light oiling to prevent corrosion where necessary, and occasional light reconditioning if wear becomes apparent. Is the plate suitable for permanent installation on a bench or does it need special supports? The robust 150 kg construction makes the plate ideal for fixed or semi-fixed installation; pairing it with a stable bench or dedicated stand ensures best ergonomics and repeatable results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Runout Testing Device 170mm Measuring Height, 16mm Movable Tip Travel, Cast Frame, 85kg - Metav IndustryLine
Benefit from a high-capacity metrology station that combines a 1,000 mm measurement range with ±0.02 mm repeatability and a rigid cast-iron construction to keep production checks fast and reliable; order the M208.203 runout tester directly via Metav Werkzeuge or consult our specialists if further integration advice is required. M208.203 Runout tester — 1,000 mm range, 170 mm measuring height (Metav IndustryLine) M208.203 Runout tester is a heavy-duty inspection unit for concentricity and runout verification on shafts and rotors, designed for repeatable checks in workshop and small-series production environments. 1,000 mm measurement range for large components 170 mm measuring height for axial setups Cast-iron frame and centres for maximum stability 16 mm travel on movable centres Precision control for production acceptance and SPC The unit delivers consistent runout assessment thanks to a specified accuracy of ±0.02 mm, which supports reliable in-process checks and short-run quality gates. With a 1,000 mm measurement range, the station accommodates long shafts and larger assemblies that are impractical on bench instruments, reducing handling and turnaround time. The translated technical design concentrates on mechanical stability rather than electronic complexity, which simplifies routine measurements and helps maintain process capability. This rational advantage makes the station particularly suited for manufacturing operations that require traceable and reproducible concentricity results. Built for stability and low measurement uncertainty A cast-iron frame and cast centres form the structural backbone, damping vibrations and resisting thermal distortion during inspections. The 60° measuring tips and a centre height of 176 mm ensure positive contact geometry, while the movable centres provide fine positional adjustment with 16 mm travel, facilitating quick clamping of diverse workpieces. These mechanical choices reduce operator-induced variation and support tighter tolerances without elaborate fixtures, which translates into fewer reworks and more consistent parts passing final inspection. Flexible fixturing for diverse shaft and spindle geometries The arrangement of cross arm and column (Ø10 × 150 mm and Ø12 × 176 mm respectively) allows straightforward adaptation to different diameters and support points, so setup time is minimised. A 170 mm measuring height is especially useful when axial access and clearance are limited; it allows the unit to inspect parts that require off-centre supports or accessory tooling. The combination of reach and stable support means the tester can be used for individual quality checks, first-off inspections, and spot checks during production without resorting to production-line downtime. Workshop integration, traceability and practical benefits The design focuses on durable, low-maintenance operation: robust materials and simple kinematics mean fewer servicing intervals and predictable long-term performance. Identification details such as SKU and GTIN make asset tracking and procurement straightforward for procurement and calibration logs. By providing clear measurement capability and a stable fixturing platform, the device reduces the need for repeated checks elsewhere in the process, supporting a smoother workflow and greater confidence in final part quality. For tailored technical advice and supply from Metav IndustryLine, contact Metav Werkzeuge in Emmerich and quote M208.203 to discuss delivery options, spare parts and integration into existing inspection routines Technical Data Article number: M208.203 GTIN: 4054469105369 eClass: 27201190 TARIC / CN: 90173000 Facts Measurement range: 0–1,000 mm Measuring height: 170 mm Accuracy: ±0.02 mm Movable centres travel: 16 mm Centre height: 176 mm Cross arm: Ø10 × 150 mm Column: Ø12 × 176 mm Overall length: 1,420 mm Special features Frame and centres made from cast material Measuring tips: 60° geometry Designed for concentricity and runout checks Suitable for inspection of long shafts and rotors FAQ What measurement accuracy can be expected from this station? The M208.203 runout tester provides an accuracy of ±0.02 mm for runout measurements, ensuring dependable results for production control and acceptance. Which component dimensions are supported by the tester? With a measurement range of 0–1,000 mm and a measuring height of 170 mm, the device handles long shafts and larger assemblies that require a stable inspection platform. What materials make up the inspection unit? The station is constructed with a cast frame and cast centres to deliver high rigidity and reduced vibration, which improves repeatability during measurements. How are different shaft diameters accommodated? Adjustable centres with 16 mm travel and 60° measuring tip geometry enable secure contact and quick reconfiguration for differing diameters and fixture setups. Is the instrument suitable for routine production use? Yes; the combination of a wide measurement range, low measurement uncertainty and robust construction makes it well suited for routine shop‑floor inspection and short‑run quality assurance using Metav IndustryLine components. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Surface Plate, Cast Grey Iron, DIN 876/3, 180mm Height - Metav IndustryLine
Take advantage of a stable, DIN‑rated flat surface and the wear‑resistant grey cast iron construction to ensure reliable layout and inspection work in the workshop; the heavy mass and 25 mm plate thickness provide excellent vibration damping and repeatable results. Order the plate directly via Metav Werkzeuge or consult our specialists for application advice. Cast‑iron Surface Plate M206.209 — 1,000 x 1,000 mm, DIN 876/3 (Metav IndustryLine) The Cast‑iron Surface Plate M206.209 is a robust, flat reference and marking surface designed for workshop layout, inspection and assembly tasks where consistent flatness and stability are essential DIN 876/3 accuracy class Grey cast iron for long life 1,000 x 1,000 mm working surface A dependable reference for precise layout and inspection A large, flat working area specified at 1,000 x 1,000 mm offers a reliable foundation for scribing, measuring and assembly. The plate’s DIN 876/3 classification signals a defined tolerance band for flatness, making it suitable as a workshop reference where repeatability matters. The grey cast iron construction resists abrasive wear and, together with the plate’s mass, reduces the influence of shop vibrations; this combination supports more consistent measurement and clearer marking lines compared with lighter alternatives. For production environments and quality control benches, the result is fewer reworks and better alignment during downstream processes. Engineering that improves measurement stability and repeatability The top surface, at a nominal 25 mm thickness, and a total mass of 200 kg ensure substantial rigidity and excellent damping characteristics. Heavy mass is not merely weight: it suppresses high‑frequency disturbances and supports stable readings during layout or inspection operations. The standardised flatness (DIN 876/3) provides a verifiable basis for comparative measurements and machine setup tasks, which simplifies process documentation and reduces uncertainty in go/no‑go checks. Where a consistent datum plane is required, the plate acts as a dependable benchmark, supporting productivity improvements and traceable quality procedures. Practical handling, maintenance and workshop integration Although robust, the surface benefits from straightforward maintenance: routine cleaning of swarf and protective lubrication of any exposed edges preserves the usable life of the surface and reduces corrosion risk. The plate’s dimensions and flatness make it adaptable for clamping jigs, checking fixtures and machine setup, while the material’s thermal mass moderates brief temperature fluctuations in typical workshop conditions. Sourcing through Metav IndustryLine brings an established supply chain and verification that fits into a shop’s workflow; the product is intended to deliver long service life with minimal specialist upkeep, thereby lowering total cost of ownership through reduced downtime. For workshop installations that require a stable, DIN‑rated datum, contact Metav Werkzeuge for delivery from Emmerich or for tailored advice on integrating the plate into inspection and layout processes. Technical data Article number: M206.209 GTIN: 4054469103402 Tariff number: 90178090 Facts Dimensions: 1000 x 1000 x 25 mm Thickness: 25 mm Overall height: 180 mm Weight: 200 kg Standard: DIN 876/3 Special features Material: Grey cast iron Category: Measuring table / surface plate Intended use: Layout, marking and inspection Manufacturer brand: Metav IndustryLine FAQ What flatness class does the plate conform to? The plate meets DIN 876/3, which defines the permitted flatness tolerances for this size and ensures a reliable reference plane for workshop inspection and layout tasks. Is the surface suitable for repeated scribing and marking? Yes, the grey cast iron surface is wear‑resistant and appropriate for scribing lines and fixtures; regular cleaning and minimal protective lubrication will prolong usable life. How does the mass of the plate affect measurement stability? The plate’s 200 kg mass provides effective vibration damping and thermal inertia, which helps maintain stable, repeatable readings during marking and set‑up operations. Can the plate be used as a mounting base for small fixtures or jigs? The 1,000 x 1,000 mm working area and stiff cast‑iron construction make the plate well suited as a mounting base for inspection fixtures and small assembly jigs. Which brand and model should be referenced when ordering or documenting equipment? Reference Metav IndustryLine Cast‑iron Surface Plate M206.209 when ordering or recording the equipment for traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000x1000x100/150mm Anti-Slip Mounting Plate for Measurement Tables, For Caliper-Compatible Platen - Filetta
Take advantage of a secure anti-slip solution that is compatible with large measuring plates and speeds up setup time; the combination of improved measurement repeatability, robust plate-frame compatibility and simple fitting supports reliable inspection routines. Order the unit via Metav Werkzeuge or request consultant advice for integration into existing metrology benches. Rutschsicherung — Anti-slip device for measuring plate frames, compatible with 1000×1000×100–150 mm plates (Filetta) Rutschsicherung provides a secure bearing that prevents lateral movement of measuring plates on plate frames and supports precise, repeatable positioning in workshop and inspection environments Secure anti-slip surface for measuring plates Designed for 1000×1000×100–150 mm plates Simple installation on plate frames Enhances measurement repeatability Secure base for consistent, repeatable measurements A dedicated anti-slip bearing reduces micro‑movements that otherwise introduce scatter into dimensional checks. By stabilising the measuring plate on the support frame, the device contributes directly to improved measurement repeatability and fewer retests in standard inspection routines. The function is particularly valuable in metrology and inspection stations where even small lateral shifts can affect tolerance assessments and traceability records. Built for plate-frame compatibility and fast fitting Engineered to match measuring plates with dimensions 1000×1000×100–150 mm, the unit integrates with common plate-frame geometries used in metrology tables. The straightforward mounting concept shortens setup time and reduces fixture adjustments between measurements, which translates into higher throughput for repetitive checks. Compatibility with standard plate formats also eases inventory management for workshops and quality labs. Workflow benefits and integration into inspection benches The device is intended for industrial metrology and messtisch applications where stability equals confidence in results. Its contribution to a reproducible measuring environment reduces rework and supports a smoother production flow. Sourcing through a specialist partner assures product traceability and consistent delivery quality, reinforcing the workshop’s capability to maintain steady inspection quality across shift changes. Contact Metav Werkzeuge for procurement details and to confirm compatibility with existing plate frames and metrology benches Technical Data Article number: MS131.130 Product: Rutschsicherung Suitable for: measuring plates 1000×1000×100/150 mm Manufacturer: Filetta Facts Compatible plate size: 1000×1000×100–150 mm Special features Anti-slip function for plate stabilisation For mounting on measuring plate frames Improves repeatable positioning during inspections FAQ What is the primary purpose of this anti-slip device? The anti-slip device secures measuring plates to the support frame to prevent lateral movement and to improve repeatability during inspection routines with measuring plates sized 1000×1000×100–150 mm. Is the anti-slip device compatible with other plate sizes? The product is specified for measuring plates with dimensions 1000×1000×100–150 mm; compatibility with other sizes depends on frame geometry and should be checked prior to procurement. How does the anti-slip device affect measurement throughput? By reducing the need for position corrections and repeat measurements, the device contributes to faster setup and higher throughput in routine inspection processes. Can the anti-slip unit be retrofitted to existing messtisch frames? Retrofitting is typical where frame geometry matches the device’s mounting concept; technical checks are recommended to confirm fit on existing assemblies. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1000x630mm Stand With Drawer Storage, Adjustable Feet, Solid Steel Frame 60x60mm - Metav IndustryLine
Take advantage of a robust support that combines solid construction, precise levelling and organised accessory storage for reliable measurement setups; order the frame directly via Metav Werkzeuge or contact our consultants for product guidance. Frame with Drawers for Granite Plate M206.121 — solid 60×60 mm steel, adjustable levelling the Frame with Drawers for Granite Plate M206.121 is a sturdy support for workshop and inspection tables, designed to carry standard granite plates and to keep measuring accessories organised Solid 60×60 mm steel square tube Integrated drawers for accessory storage Adjustable levelling screw (up to 10 mm) Suitable for granite plates up to 1000×630 mm Built for stable measuring surfaces and reproducible results The frame is manufactured from solid steel square tube with a 60×60 mm profile and 2 mm wall thickness, which translates into high stiffness and long-term dimensional stability under workshop conditions. That rigid construction reduces unwanted deflection and vibration, ensuring that a mounted granite plate remains a reliable reference surface for precision work. The design concentrates on delivering repeatable setups, which shortens inspection preparation times and supports consistent quality control workflows. Practical organisation integrated into the support Built-in drawers provide immediate benefits for daily operation: stored probes, gauges and small tools are kept at hand and protected from dust while remaining easy to access. The integrated storage minimises movement around the measuring station, which reduces the risk of accidental knocks to the granite surface and improves process efficiency. Where space and workflow matter, this practical feature supports a tidier workstation and faster inspection cycles. Precise adjustment for uneven floors Height differences are compensated via the levelling screw, which offers an adjustment range of up to 10 mm, enabling accurate alignment of the granite plate even on imperfect floors. Fine levelling reduces measurement uncertainty that would otherwise arise from uneven supports and makes initial set-up quicker. The levelling mechanism is straightforward to operate and keeps the plate orientation stable once adjusted, helping to maintain measurement integrity throughout the working day. Compatibility with common granite plate formats The support is specified for standard granite plate dimensions commonly used in workshops and metrology labs. It is suitable for plates measuring 630×400×100 mm, 630×630×100 mm, 800×850×100 mm and up to 1000×630×100 mm, allowing flexible selection of the reference surface to match the parts and fixtures in use. This compatibility makes the support a versatile choice for machine shops, toolrooms and inspection areas that rely on different plate sizes for varied tasks. Contact Metav Werkzeuge today for availability, bespoke advice and delivery details from our Emmerich team Technical data Article number: M206.121 GTIN: 4054469183046 Manufacturer: Metav IndustryLine Facts Material: solid steel square tube 60×60 mm, wall thickness 2 mm Weight: 24 kg Dimensions (frame): 614 × 409 × 710 mm Overall height: 810 mm Levelling range: up to 10 mm Special features Integrated drawers for accessory storage Suitable for granite plates: 630×400×100 mm; 630×630×100 mm; 800×850×100 mm; 1000×630×100 mm Foot with levelling screw for height compensation FAQ Which granite plate sizes does the frame accept? The frame accepts granite plates in the sizes 630×400×100 mm, 630×630×100 mm, 800×850×100 mm and 1000×630×100 mm as specified for the Frame with Drawers for Granite Plate M206.121 What is the frame made from? The Frame with Drawers for Granite Plate M206.121 is made from a solid steel 60×60 mm square tube with a 2 mm wall thickness, providing the rigidity required for precision measuring setups How is levelling adjusted on the support? Levelling is performed via an adjustable levelling screw that provides up to 10 mm of compensation, allowing the plate to be aligned accurately on uneven floors Are storage drawers included and what are they for? Yes, the support features integrated drawers for organised storage of small measuring accessories, probes and tools to keep the workstation tidy and reduce handling time What are the item number and weight of the support? The support is listed as M206.121 and has a weight of 24 kg; the GTIN is 4054469183046 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000x630x100/150mm Anti-Slip Pad For Measurement Table Plates - Filetta
Take advantage of a compact, reliable anti-slip solution that secures measurement plates with the dimensions 1000 x 630 x 100/150 mm, reduces lateral movement during set-up and inspection, and integrates easily with measurement plate frames and stands. Order the anti-slip device directly via Metav Werkzeuge or ask our consultants if needed. Anti-slip device for measurement plate frames by Filetta — fits 1000 × 630 mm plates A anti-slip device designed to hold measurement plate frames steady on workshop stands and inspection rigs, optimising repeatable set-ups for metrology tasks. Secure hold for 1000 x 630 mm measurement plates Designed for measurement plate frames and stands Robust anti-slip function for workshop environments Improved measurement repeatability through secure support A stable support surface is a prerequisite for precise inspection. The anti-slip device prevents unwanted lateral shift of the measurement plate, which reduces measurement scatter and the need for repeat runs. By limiting micro-movements during tactile or optical probing, the component supports consistent contact conditions and therefore enhances repeatability across multiple operations. This makes the solution particularly useful where fixed-fixture accuracy feeds directly into quality decisions. Fast, straightforward fitment for workshop workflows Fitting is engineered for practicality: the design integrates with existing measurement plate frames and associated stands, allowing teams to prepare jigs and plates quickly and return to production without lengthy rework. The compact format minimises set-up time while maintaining the required clamping stability. As a result, cycle times for inspection and alignment tasks are shortened and workshop throughput benefits from fewer interruptions and faster batch checks. Protects test routines without complex adjustments The device preserves the alignment and reference plane of the measurement plate during both static and dynamic checks. Because it is purpose-built for measurement plate frames, there is no need for additional fixtures or bespoke adaptors for the specified plate size. This focused compatibility reduces the scope for operator error and keeps the test procedure lean—improving the overall efficiency of calibration and quality-assurance workflows. Supply reliability and the Metav advantage Sourcing this Filetta anti-slip solution through Metav leverages a dependable European supply chain and hands-on specialist support from a supplier experienced in precision metrology. Metav’s offering aims to make high-precision accessories accessible across workshops and small production facilities, ensuring consistent availability and a straightforward procurement path. The practical combination of compatibility, quick fitment and supply reliability supports stable, long-term measurement processes. Contact Metav Werkzeuge for tailored advice on the Filetta anti-slip device and ensure measurement plate frames are secured precisely and promptly Technical Data Article number: MS131.127 Manufacturer: Filetta Category: Messtisch Facts Compatible plate dimensions: 1000 x 630 x 100/150 mm Intended use: Measurement plate frames and stands Special features Anti-slip function for measurement plate frames Designed for workshop and inspection environments Integrates with measurement plate stands FAQ Which plate dimensions are supported? The anti-slip device is designed for measurement plates sized 1000 x 630 x 100/150 mm (Filetta, SKU MS131.127). Can it be used with measurement plate frames and stands? Yes, the device is intended for use with measurement plate frames and compatible stands to provide stable support during inspection tasks. Will the anti-slip device improve repeatability? Yes, by preventing lateral movement of the plate, the device helps reduce variation between successive measurements and supports repeatable test conditions. Is this Filetta accessory suitable for workshop use? The design accommodates typical workshop and inspection environments where measurement plates are mounted on frames or stands. How is the item identified for ordering? Refer to SKU MS131.127 (Filetta) when enquiring or ordering through Metav Werkzeuge Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
100mm Gauge Rod For Granite Plate With M8 Thread, Ø28x230 Column Ø18x190 Crossarm - Metav IndustryLine
Robust mounting and compact dimensions combine to deliver stable incremental extension for height gauge 208.144. The rod provides a 100 mm measuring range with an M8 mounting thread and a stiff Ø28×230 mm column, ensuring reproducible set-ups and minimal vibration. Order the accessory directly via Metav Werkzeuge or consult the Metav team for configuration advice. Measuring rod M208.143.S – Accessory for 208.144 with 100 mm range and M8 mount (Metav IndustryLine) The Measuring rod M208.143.S is a compact accessory designed to extend the measurement capability of the 208.144 height gauge by 100 mm, offering a stable column and versatile cross arm for precision inspection tasks in workshops and metrology labs. Extends measurement range to 100 mm M8 thread for granite plate mounting Ø28×230 mm column for stable support Ø18×190 mm cross arm for versatile positioning Greater stability for repeatable measurements The extension rod is engineered to provide a stiff support structure, with a Ø28×230 mm main column that reduces deflection during contact measurements. Paired with the Ø18×190 mm cross arm, the configuration maintains alignment for short-range gauging tasks and small assemblies. This construction increases measurement reproducibility, translating into fewer rechecks and a more efficient inspection routine without additional mechanical adaptation. Secure mounting and straightforward integration Mounting uses an M8 thread widely found on granite plates and metrology fixtures, enabling fast integration into existing setups. The threaded connection combined with the rod’s mass of 2.4 kg gives inertia that helps dampen external disturbances during measurement. The simple mechanical interface avoids complex adapters, which reduces set-up time and supports predictable results in production or quality-control environments. Designed for reliable workshop use As an accessory for the 208.144 system, the rod is suited to everyday tasks in machine shops and inspection benches where compact extension and consistent positioning are required. The accessory is classified as a measuring-instrument component and supports modular arrangements, helping to maintain workflow continuity when switching between small workpieces or repeat measurements on the same fixture. Low-maintenance accessory that supports throughput The straightforward mechanical design minimises maintenance needs while delivering consistent performance under regular use. Fewer moving parts mean less adjustment and a smaller risk of cumulative error, so inspection throughput can be increased without compromising data quality. The accessory complements existing metrology assets by delivering predictable mechanical behaviour in short-range gauging tasks. Contact Metav Werkzeuge for tailored advice on integrating the measuring rod M208.143.S with existing 208.144 setups and to arrange prompt supply from Emmerich. Technical data Article number: M208.143.S GTIN: 4054469104942 Label: Measuring rod 208.143 for 208.144 measuring range 100 mm Facts Measurement range: 100 mm Weight: 2.4 kg Cross arm: Ø18×190 mm Column: Ø28×230 mm Special features Mounting thread: M8 Suitable as accessory for measuring device 208.144 Category: Accessory (Measuring instruments) FAQ What measurement range does this accessory provide? The measuring rod offers a 100 mm extension to the measurement capability of the 208.144 system, enabling short-range gauging tasks. Is the rod compatible with granite plate fixtures? Yes. The rod uses an M8 mounting thread compatible with standard granite plate fixings and metrology fixtures. What dimensions contribute to the rod’s stability? Stability is achieved through the Ø28×230 mm column and the Ø18×190 mm cross arm, which together reduce deflection during contact measurements. Which device is this accessory intended for? This accessory is intended for use with the 208.144 measuring device and is supplied as a dedicated extension component (SKU M208.143.S). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Round Measuring Table Ø50mm Plate Height 220mm Hardened Ground Lapped - Metav IndustryLine
Take advantage of the combination of hardened, ground and lapped contact surfaces, a compact 0–100 mm measurement range, and the stable Ø50 mm round measuring plate to improve repeatability in daily inspection tasks. Order the measuring table directly via Metav Werkzeuge or consult their specialists for workshop integration. Measuring Table M208.141 — round measuring plate Ø50 mm, height 220 mm A Measuring Table M208.141 designed for precision fixturing and inspection of small components in standard machine‑shop environments. Hardened, ground and lapped surface finish Round measuring plate Ø50 mm for compact parts Total height 220 mm for stable mounting Measurement range 0–100 mm for workshop inspection Stable support for repeatable measurements The table is built to provide a stable support for repeatable inspection work, using a hardened, ground and lapped finish on contact surfaces that reduces wear and thermal sensitivity. The compact footprint and the Ø50 mm measuring plate concentrate support where it is needed for small components, while the overall geometry keeps the centre of gravity low for fewer measurement deviations. This configuration is suited to daily quality checks and bench inspection tasks where consistent results matter. Compact design that suits the universal workshop With a measurement range of 0–100 mm, this device fits the standard workshop category for general mechanical and metalworking inspections. The modest overall height of 220 mm and the slim column (Ø22 × 160 mm) make the unit easy to place on inspection benches, stands or within small fixtures while maintaining necessary stiffness. The compact design supports efficient workflows: fewer repositionings, faster set‑up times and reliable comparisons between batches. Precise mounting and clear integration options Mounting and alignment are simplified by a precision bore specified as 8 H7, which ensures reproducible positioning of fixtures or probing accessories. An effective projection of 40 mm provides working clearance without compromising stability. The overall construction and choice of materials emphasise long service life and low maintenance, so the unit remains a dependable element in production control or incoming inspection. Practical benefits for everyday metrology The construction translates technical properties into practical advantages: reduced measurement variability from the lapped contact faces, straightforward integration into inspection routines thanks to the compact Ø50 mm plate, and improved throughput because of the ergonomic height and column arrangement. These attributes support efficient quality control and contribute to consistent part acceptance decisions on the shop floor. Contact Metav Werkzeuge to discuss how the M208.141 measuring table can be specified for workshop use and to arrange supply directly from Emmerich. Technical Data Article number: M208.141 GTIN: 4054469104911 Label: Messtisch 100 mm, Messplatte rund Ø 50 mm Höhe 220 mm Data Measurement range: 0–100 mm Total height: 220 mm Measuring plate: round Ø50 mm Projection (Ausladung): 40 mm Column: Ø22 × 160 mm Mounting bore: 8 H7 Weight: 2.8 kg Special features Material: hardened, ground and lapped Category: Measuring table Intended use: inspection and fixturing of small components Customs tariff number: 90314990 FAQ What measurement range does the table cover? The measuring table covers a 0–100 mm measurement range suitable for standard workshop inspections and bench measurement tasks. Is the measuring plate fixed or replaceable? The round measuring plate (Ø50 mm) is integrated into the unit and finished hardened, ground and lapped to provide a durable, stable contact surface for repeatable measurements. What does the 8 H7 designation mean for mounting? The designation 8 H7 indicates a precision bore with H7 tolerance for an 8 mm fit, enabling reproducible mounting of fixtures or probes. Which workshop applications suit this measuring table best? The unit is aimed at standard machine‑shop inspection, quality control benches and small‑parts fixturing where a compact, stiff support and a 0–100 mm range are required. What are the main benefits for daily quality control? Benefits include a hardwearing contact surface for consistent readings, a compact footprint for quick set‑up, and stable geometry to reduce measurement variation during routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Rectangular Measuring Table 60x68mm Plate Height 207mm With Dust Grooves - Metav IndustryLine
Take advantage of a compact measuring solution that combines hardened, ground and lapped construction with a stable measuring range up to 110 mm and integrated dust protection; order directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Measuring Table 100 mm M208.142 — Rectangular measuring table with 60 × 68 mm plate (Metav IndustryLine) The Measuring Table 100 mm M208.142 is a compact, hardened and lapped inspection table designed for precise workshop measurement and small-part alignment in machine shops and inspection benches. Hardened, ground and lapped construction Measuring plate 60 x 68 mm Measurement range up to 110 mm Integrated dust grooves for longevity Precision and repeatability for dependable inspection results The hardened, ground and lapped construction delivers a consistently flat reference surface and minimises wear over time, supporting repeatable measurements in routine inspection tasks. The device’s measurement range of 0–110 mm and an overall height of 207 mm establish a reliable reference plane for aligning small components, gauge blocks or comparators. Where exactness matters, the refined surface finish reduces measurement scatter and ensures that dimensional checks remain within expected tolerances, making it suitable as a stable bench-mounted metrology aid. Reduced maintenance through smart design Integrated dust grooves protect the measuring surface from particulate ingress, extending service intervals and preserving accuracy. The rectangular measuring plate (60 × 68 mm) offers a compact contact area that is easy to clean and to keep free of contaminants, while the unit’s mass assists in damping vibrations during use. These design choices lower the total cost of ownership by reducing the frequency of rework and surface preparation, helping production and inspection teams maintain throughput without sacrificing measurement quality. Compact footprint for flexible workshop use With modest dimensions and a weight of 3.7 kg, this rectangular measuring table fits easily on inspection benches and inside fixture assemblies, supporting versatile set-ups in small parts manufacture and toolrooms. The combination of a small measuring plate and a stable column/cross-arm geometry (Ø22×160 column, Ø18×140 cross arm) allows for precise positioning of accessories and indicators without occupying excessive bench space. The unit is optimised for close-tolerance checks and repeat verification tasks where a robust, portable reference surface is required. For application advice or to specify the Metav IndustryLine Measuring Table 100 mm M208.142 for a particular inspection task, contact Metav Werkzeuge in Emmerich to discuss technical details and compatibility with existing gauges Technical data Article number: M208.142 GTIN: 4054469104928 Manufacturer: Metav IndustryLine Core specifications Measuring range: 0–110 mm Measuring plate: 60 x 68 mm Height: 207 mm Weight: 3.7 kg Cross arm: Ø18 x 140 mm Column: Ø22 x 160 mm Tariff number: 90314990 Special features Material: hardened, ground and lapped Shape: rectangular measuring plate Dust grooves present eClass: 21170604 FAQ What is the measuring range of the table? The measuring table provides a measuring range of 0–110 mm suitable for small-part inspection and comparator set-ups. Is the measuring surface treated for durability? Yes, the measuring plate is hardened, ground and lapped, ensuring long-term flatness and wear resistance. Can the table be used for fixture alignment and small assemblies? Yes, the compact plate (60 x 68 mm) and stable 207 mm reference height make the table appropriate for fixture alignment and small-assembly checks. Are dust grooves included to protect the measuring surface? Dust grooves are integrated into the design to reduce particulate build-up and extend the service life of the reference surface. Which product code identifies this unit? This unit is supplied as Measuring Table 100 mm M208.142 (SKU M208.142) from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200 x 800 x 150 mm Granite Surface Plate Grade 0, DIN 876/0 - Metav IndustryLine
Take advantage of the Grade 0 accuracy and the mass‑stabilised construction to create a reliable inspection baseline that improves reproducibility and reduces rework. The generous 1200 x 800 x 150 mm measuring surface combined with the inherent damping of dark granite provides long‑term stability for bench‑level metrology. Order the granite surface plate directly via Metav Werkzeuge or contact our consultants for integration advice. Granite surface plate 1200 x 800 x 150 mm, Grade 0 — Metav IndustryLine A Granite surface plate 1200 x 800 x 150 mm, Grade 0 serving as a stable inspection and layout reference for metrology laboratories and workshop quality control Grade 0 accuracy to DIN 876/0 Large 1200 x 800 mm measuring surface 150 mm thickness for high rigidity Dark granite construction, vibration-dampening Precision baseline that supports dependable measurements A laboratory‑grade reference surface with Grade 0 tolerance according to DIN 876/0 creates a reproducible zero for dimensional checks and layout tasks. The plate’s specification ensures a flatness band appropriate for high‑accuracy inspection, so height gauges, dial indicators and layout tools perform against a certified geometric reference. Using a dedicated surface plate as the stable datum minimises cumulative errors in assembly checks and reduces the incidence of scrapped parts, offering a measurable quality‑control advantage on the shop floor. Mass and material that improve stability and reduce noise The combination of a heavy body and a dense dark granite material helps suppress vibrations and thermal drift during measurement cycles. With a mass of 450 kg, the plate dampens ambient disturbances and supports repeatable readings across the entire surface. The 150 mm thickness contributes structural rigidity, keeping the traverse deflection low under typical test loads. Together these properties translate into more reliable comparative measurements and fewer retests during process control. Generous working area with workshop practicality The substantial 1200 x 800 x 150 mm measuring surface provides ample room for multi‑point reference tasks, assembly checks and layout marking without frequent repositioning. The plate is supplied as a control plate only, without stand, which allows customers to integrate it into existing benches, stands or instrument tables according to their workflow. The dark, fine‑grained granite resists corrosion and is straightforward to maintain with proper cleaning practices, preserving the measuring surface quality over many years of service. Why a Metav IndustryLine plate adds value to the workshop Choosing a Metav IndustryLine reference surface connects the inspection process with a wider supply and service network focused on accessible precision. The plate is suited to manufacturers and inspection labs that require a dependable metrology baseline without unnecessary extras; its robust design supports a stable production flow and helps maintain traceable measurement routines. If additional configuration advice is needed, Metav’s consultants can recommend suitable fixtures and transport arrangements to match the shop’s handling capabilities. Contact Metav Werkzeuge to discuss delivery options, site suitability and integration of the Metav IndustryLine granite surface plate into the production or inspection workflow. Technical data SKU: M206.109 GTIN: 4054469103082 Label: Granite surface plate, 1200 x 800 x 150 mm, Grade 0 Facts Dimensions: 1200 x 800 x 150 mm Weight: 450 kg Accuracy: Grade 0 (DIN 876/0) Special features Material: dark granite Standard: DIN 876/0 Delivery: control plate only, without stand Tariff number: 68022300 Category: Messtisch FAQ What level of flatness tolerance does this plate provide? The granite surface plate meets Grade 0 flatness tolerances as specified by DIN 876/0, giving a high‑precision reference suitable for laboratory and advanced workshop inspections. Is the granite plate supplied with a support or stand? Delivery comprises the control surface only; the plate is supplied without stand, allowing custom integration into existing benches or specially selected supports. How does the plate’s mass influence measurement stability? The plate’s 450 kg mass increases vibration damping and reduces external disturbance, improving repeatability for comparative and layout measurements across the plate. Can the surface plate be used for layout and as a datum for height gauges? Yes — the large 1200 x 800 mm measuring surface is suitable as a stable datum for height gauges, dial indicators and layout operations in both metrology labs and production inspection. Who manufactures and supplies this surface plate? This unit is offered under the Metav IndustryLine brand and distributed via Metav Werkzeuge; refer to the SKU M206.109 for ordering and specification checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200x800mm Granite Plate Stand With Storage Drawers, Adjustable Feet (±10mm) - Metav IndustryLine
Take advantage of a rigid steel frame, dependable levelling adjustment and integrated storage to keep measuring routines efficient and repeatable; order the Stand with Drawers for 1200 × 800 mm Granite Plate directly via Metav Werkzeuge or ask our consultants if needed. Stand with Drawers for 1200 × 800 mm Granite Plate — Steel Frame with Levelling Adjustment (Metav IndustryLine) The Stand with Drawers for 1200 × 800 mm Granite Plate is a heavy-duty metrology support designed to carry a 1200 × 800 × 150 mm granite surface plate and provide a stable, organised base for precision inspection and layout work. Solid 60 × 60 mm steel square tube frame Integrated drawers for accessory storage Levelling feet with 10 mm adjustment range Compatible with 1200 × 800 × 150 mm granite plates Stability that raises measurement quality A purpose-built support improves repeatability by offering a stable base for the granite surface plate. The frame is constructed from 60 × 60 mm steel square tubing with a 2 mm wall thickness, yielding the rigidity needed to resist deformation under load. At a weight of 31 kg, the unit minimises movement and helps maintain consistent contact between the plate and workpieces, which reduces the influence of external vibrations during inspections. The compact footprint (725 × 504 × 660 mm) keeps the setup accessible while ensuring the granite slab remains fully supported. Built-in organisation to streamline workflows Integrated storage simplifies day-to-day metrology tasks by keeping gauges and accessories at hand. The built-in drawers provide protected space for small tools and fixtures, enabling faster changeovers and fewer interruptions during quality checks. By combining a support frame and tidy storage, the design reduces the need for separate trolleys or benches, which saves floor space and shortens the time from setup to measurement. The clear organisation also contributes to safer handling of precision instruments, lowering the risk of accidental knocks or contamination. Precision levelling and workshop durability Uneven floors are a common source of measurement error; the levelling mechanism with a 10 mm adjustment range compensates for height differences and ensures the plate sits true. The levelling screw is designed for workshop robustness and simple fine-tuning so that the granite surface can be aligned quickly without special tools. The solid steel construction resists wear in industrial environments and is suitable for routine use in machining, inspection and toolroom settings. Compatibility with a 1200 × 800 × 150 mm granite plate makes this frame the practical choice for standard workshop metrology setups. Secure the Metav IndustryLine stand with drawers to ensure a stable metrology base — contact Metav Werkzeuge for tailored delivery options and expert advice. Technical Data Article number: M206.122 GTIN: 4054469183053 Weight: 31 kg Dimensions (L×W×H): 725 × 504 × 660 mm Overall height: 760 mm Core specifications Frame profile: 60 × 60 mm square tube, 2 mm wall thickness Levelling adjustment range: 10 mm Suitable for granite plate size: 1200 × 800 × 150 mm Features Integrated drawers for accessory storage Levelling screw to compensate height differences Solid steel construction for workshop durability FAQ Is this stand suitable for a 1200 × 800 mm granite plate? Yes. The Stand with Drawers for 1200 × 800 mm Granite Plate is designed specifically to accept granite plates measuring 1200 × 800 × 150 mm and to provide a stable metrology surface. What material is the frame made from and how robust is it? The frame is fabricated from 60 × 60 mm steel square tubing with a 2 mm wall thickness, giving the Metav IndustryLine M206.122 the rigidity required for regular workshop use. How is the stand levelled on uneven floors? Levelling is achieved via an adjustable levelling screw with an adjustment range of 10 mm, allowing accurate compensation for minor floor irregularities and improving measurement repeatability. Does the stand include storage for tools and accessories? Yes. The unit features integrated drawers for the organised storage of measuring accessories and small fixtures, helping to streamline inspection workflows. What are the unit dimensions and weight for planning a workspace? The frame measures 725 × 504 × 660 mm (L×W×H) with an overall height of 760 mm and weighs 31 kg, facilitating stable installation beneath a 1200 × 800 × 150 mm granite plate. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200x800x120/150mm Anti-Slip Stop For Measuring Plate Frames, Fits Mess Plates 1200x800x120/150mm - Filetta
Secure measurement plates reliably with targeted slip protection that matches 1200 x 800 x 120/150 mm plates; the simple fitting reduces setup time and improves repeatability on measuring plate stands. Order directly via Metav Werkzeuge or consult our specialists for application checks. Anti-slip pad for measuring plate stands — compatible with 1200 x 800 x 120/150 mm (Filetta) The Anti-slip pad provides secure, non-slip support for measuring plates on stands and frames, designed specifically for plates with dimensions 1200 x 800 x 120/150 mm Prevents plate movement during inspection Fits 1200 x 800 mm measuring plates Simple retrofit for standard stands Secure, slip-resistant contact surface Stable support for repeatable measurements The anti-slip solution increases repeatability by preventing lateral movement of the measurement plate during inspection and assembly tasks. By creating a defined interface between the plate and its support, the accessory reduces micro‑shifts that can lead to measurement scatter and rework. The direct effect is a more reliable measuring process, with fewer interruptions for realignment and a clearer traceability of measurement conditions. Fast compatibility checks and straightforward fitting Designed to match measuring plates with the dimensions 1200 x 800 x 120/150 mm, the pad allows quick verification of fitment on common plate stands. The product supports straightforward retrofitting on existing stands and frames, enabling immediate integration into workshop workflows. This compatibility reduces downtime and avoids the need for custom adapters, making the component a pragmatic addition to standard inspection setups. Safer handling and improved inspection workflow Integrating slip protection into the support system contributes to a calmer inspection environment and lowers the risk of accidental plate displacement during handling. The presence of a defined, slip-resistant contact layer helps maintain alignment during probing and optical checks, which in turn supports consistent measurement outcomes and a smoother quality assurance sequence. For tailored compatibility advice and prompt delivery from Emmerich, contact Metav Werkzeuge — our consultants will confirm fit and application for Filetta anti-slip pads Technical data Article number: MS131.129 Brand: Filetta Suitable for measuring plates: 1200 x 800 x 120/150 mm Data Fits plate dimensions: 1200 x 800 x 120/150 mm Category: Measuring table Special features Slip-resistant contact surface For measuring plate stands and frames Manufacturer: Filetta FAQ How does the anti-slip pad improve measurement accuracy? The anti-slip pad reduces micro-movements between the plate and stand, improving repeatability and lowering the chance of measurement errors when using Filetta MS131.129. Is the pad compatible with other plate sizes? This model is specified for 1200 x 800 x 120/150 mm measuring plates; compatibility with other sizes requires verification against the stand geometry. Can the pad be fitted to existing stands without modification? In most cases, the pad is designed for retrofit on standard stands and frames; checking the stand interface dimensions ensures proper seating for the Filetta product. Does the pad affect probing or tactile measurement methods? The slip-resistant contact layer is intended to stabilise the plate without impeding access for probes or contact sensors during inspection routines. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1200x800x150mm Granite Plate Stand With Height Adjustment Screws, DIN 876/0 - Metav IndustryLine
Stable support for a 1,200×800×150 mm granite plate, constructed from solid steel square tube with integrated levelling screws; compatible with DIN 876/0 surface plates and supplied ready for installation — order directly via Metav Werkzeuge or consult our technical advisors if required. Stand for Granite Plate 1200×800×150 mm – Support Frame with Levelling Screws (Metav IndustryLine) The Stand for Granite Plate 1200×800×150 mm is a heavy-duty metrology support frame designed for inspection and measurement workstations, providing a stable base for a 1,200×800×150 mm surface plate. Solid steel square tube construction Levelling screws Ø21 mm included Suited for 1,200×800×150 mm plates Stable 24 kg base, total height 760 mm Reliable support for reproducible measurement results A firm and vibration‑resistant base is essential for accurate surface‑plate metrology. The frame’s solid steel square‑tube construction and 24 kg mass deliver a stable platform that reduces micro‑movement and increases measurement repeatability. Compatibility with DIN 876/0 plates ensures the assembly meets common workshop standards for flatness and reference use, so inspection and alignment tasks benefit from a dependable support that preserves the plate’s geometry during use. Fast levelling to compensate uneven floors Integrated levelling screws Ø21 mm allow rapid compensation of height differences and simple alignment on imperfect shop floors. The support includes adjustable feet with a functional range reflected in the product dimensions (725 × 503 × 760/660 mm), enabling users to achieve a level reference plane without complex shimming. This practical levelling approach shortens setup time and lowers the risk of systematic measurement error caused by an inclined base. Compact footprint that suits busy workshops With a footprint of 725×503 mm, the frame occupies minimal floor space while carrying a standard 1,200×800×150 mm surface plate. The conservative footprint and robust profile make the frame suitable for machine shops, quality control benches and toolrooms where space is at a premium but metrological performance cannot be compromised. The compact design eases integration into existing workstations and supports efficient workflow organisation. Clear delivery scope and workshop readiness The delivery comprises the support frame with levelling screws; it is supplied without the surface plate. The product is identified as SKU M206.109.1 and is designed for straightforward placement beneath a granite inspection plate. Weighing 24 kg, the frame is heavy enough to provide stability while remaining manageable for standard workshop handling and positioning. Accessories are limited to the included adjustment screws to keep installation simple and maintenance minimal. For robust metrology set-ups, request the Metav IndustryLine support frame via Metav Werkzeuge in Emmerich or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 to confirm suitability and delivery options Technical data Article number: M206.109.1 GTIN: 4054469103099 Label: Stand for granite plate 1200×800×150 mm Facts Weight: 24 kg Dimensions (footprint): 725 × 503 × 760 mm Height variant: 760/660 mm Compatible plate size: 1,200 × 800 × 150 mm Tariff number: 73084000 Special features Material: solid steel square tube Levelling screws Ø21 mm included Standard: DIN 876/0 Delivery scope: frame only, without surface plate FAQ Is the granite plate included with the support frame? The support frame is supplied without the surface plate; the delivery scope for the Metav IndustryLine stand covers the frame and levelling screws only. Can the frame be levelled on uneven floors? Yes, the stand features levelling screws Ø21 mm and adjustable feet to compensate height differences and achieve a horizontal reference plane. What plate size does the stand accept? The stand is compatible with a 1,200×800×150 mm granite surface plate and is dimensioned to support that format reliably. What material is the frame made from? The frame is fabricated from solid steel square tube, providing high rigidity and long-term dimensional stability. Does the frame conform to any metrological standard? The stand is intended for use with surface plates to DIN 876/0, aligning it with common flatness and reference standards for inspection work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Granite Surface Table 150 x 150 mm With Column Ø22 x 160 mm, Fixed Or Sliding Crossarm, DIN 876/0 - Metav IndustryLine
Take advantage of a DIN 876/0 granite surface and compact footprint to ensure stable, repeatable inspections; the robust Ø22 × 160 mm support column adds reliable rigidity. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Granite measuring table M208.146 — 150 × 150 mm granite plate, Ø22 × 160 mm column (Metav IndustryLine) A Granite measuring table with a precision-ground plate and a sturdy support column, engineered for small-component inspection and bench-top measuring tasks DIN 876/0 granite surface Compact 150 × 150 mm plate Ø22 × 160 mm support column Fixed or adjustable cross arm Stable inspection surface for consistent results The precision-ground granite plate provides a naturally flat and vibration-damping reference that supports repeatable measurements. Specified to DIN 876/0, the surface resists wear and thermal distortion better than metallic tops, so inspection routines remain reliable across shifts. For bench-top use, the 150 × 150 mm working area is optimised to combine reach with minimal footprint, allowing accurate placement of small components without compromising stability. This makes the table suitable for toolrooms, quality-control benches and fine-machining setups seeking low-variation results. Rigidity and setup flexibility that aid measurement precision A rigid Ø22 × 160 mm support column ensures the measuring head and cross arm remain stable during gauging and marking operations. The cross arm is supplied either fixed or adjustable, enabling alignment with diverse workpiece geometries while keeping the datum plane constant. The combination of a solid column and a vibration‑absorbing granite surface reduces measurement scatter, supporting more reliable comparisons and quicker go/no-go decisions during routine inspections. Compact design for bench-top metrology and constrained spaces Designed as a small-format inspection table, the compact granite top balances reach and manoeuvrability for small to medium workpieces. The reduced footprint aids ergonomic placement beside measuring instruments such as height gauges and microscopes, while the mass of the granite contributes to overall steadiness. Where bench space is limited, the small plate size still permits full access for clamping and probing, supporting efficient workflow without the need for large, heavy furniture. Built for workshop integration and process repeatability The table is intended as a stable reference platform within inspection chains and jig-and-fixture setups. Its DIN 876/0 grade surface simplifies traceability and documentation of measurement conditions, while the robust construction supports frequent handling in production environments. Integration into a standard metrology bench is straightforward, and the solid granite top minimises recalibration frequency by resisting knocks and thermal effects that otherwise alter metallic surfaces. For precise, repeatable inspection choose the Metav IndustryLine granite measuring table and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for product guidance and availability Technical Data Article number: M208.146 GTIN: 4054469104980 Manufacturer: Metav IndustryLine Category: Measuring table Data Measurement range: 0–120 mm Plate size: 150 × 150 mm Support column: Ø22 × 160 mm Weight: 2.15 kg Standard: DIN 876/0 Special features Material: granite plate Cross arm: fixed or adjustable Intended use: bench-top inspection and gauging Tariff number: 90173000 FAQ What is the load-bearing material of the inspection surface? The top is a precision-ground granite plate, specified to DIN 876/0 for flatness and stability. Is the support column adjustable and what are its dimensions? The support column measures Ø22 × 160 mm; the cross arm can be supplied fixed or adjustable to suit different set-ups. What measurement range is appropriate for this table? The platform is sized for precision work up to 0–120 mm, making it suitable for small-component inspection tasks. Can the table be used alongside height gauges and microscopes? Yes. The compact 150 × 150 mm plate and rigid column make the table well suited for integration with height gauges and microscopes on a metrology bench. Does the product include calibration documentation? Calibration documentation is not part of the standard specification shown; refer to Metav Werkzeuge for available calibration services and certificates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Test Stand Colour 2.4" Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of precise 0–120 mm measurement range, robust 10,000 N load capacity and integrated data transfer for efficient routine testing; order the unit directly via Metav Werkzeuge or ask the consultants for specification support. Teststand — Manual and hydraulic test stand with 10,000 N capacity and 2.4″ touchscreen A Teststand designed for manual and hydraulic force testing of components and assemblies in workshop and laboratory environments, providing a compact measurement range and digital data outputs for process integration. Measurement range 0–120 mm 10,000 N maximum load capacity 2.4″ colour touchscreen display Wireless and USB data output Dependable force testing that fits the workshop workflow The Teststand delivers repeatable force application through its manual and hydraulic actuation, making it suitable for component testing, material checks and assembly verification where controlled load and clear measurement windows matter. With a 10,000 N load limit and a compact 0–120 mm travel, the unit bridges bench‑top convenience and industrial strength, reducing test cycle time and minimising handling errors. The construction prioritises stiffness and repeatability so that results are consistent across shifts and operators, supporting faster decision making on production lines. Fast digital capture and traceability for quality systems Equipped with a 2.4″ colour touchscreen and both Wireless and USB data outputs, this unit simplifies data collection and archival for quality management. Test results can be exported directly to inspection software or logged via USB for traceable reporting, while wireless connectivity accelerates in‑situ logging without trailing cables. Supplied calibrated to ISO 17025, a formal calibration certificate is included, ensuring measurement traceability and acceptance within accredited quality systems and external audits. Designed for everyday reliability and simple operation Operation focuses on clarity and control: the intuitive display shortens training time and the manual/hydraulic hybrid design allows precise adjustments for delicate parts as well as robust handling of heavier specimens. The compact footprint suits lab benches and test stations, while the solid frame reduces vibration and improves measurement stability. Integration into existing metrology setups is straightforward thanks to the standard data interfaces; for bespoke process connections, Metav’s technical advisers can support specification choices and workflow alignment. Contact Metav Werkzeuge for tailored advice on specifying the Microtech Metrology Teststand with 10,000 N capacity and ISO 17025 calibration to match production or laboratory requirements Technical Data Article number: 235152017 GTIN: 4061905456558 Manufacturer: Microtech Metrology Type: Manual and hydraulic test stand Digital display: Color 2.4" touchscreen Data output: Wireless + USB Measurement range: 0–120 mm Maximum load: 10,000 N ISO 17025: Calibrated and supplied with certificate Category: 2D Profilmessgerät Digital: true eClass: 21170601 Numbers / Core Technical Data Measurement range: 0–120 mm Maximum load: 10,000 N Display size: 2.4″ GTIN: 4061905456558 Article number (SKU): 235152017 Special features Manual and hydraulic actuation 2.4″ colour touchscreen control Wireless and USB data interfaces Delivered calibrated to ISO 17025 with certificate Compact bench footprint for workshop and lab FAQ What measurement range does the Teststand cover? The Teststand covers a measurement range of 0–120 mm, suited to small and medium components requiring controlled force testing. What is the maximum load capacity of this test stand? The maximum load capacity is 10,000 N, allowing both delicate component checks and more demanding assembly tests with stable force application. Is the Teststand delivered calibrated? Yes, the Teststand from Microtech Metrology is delivered calibrated to ISO 17025 and includes a calibration certificate for traceability in quality systems. How can measurement data be exported from the Teststand? Measurement data is available via Wireless and USB outputs for direct export to inspection software or data logging systems. Which environments and applications suit this test stand? This unit is intended for workshops and laboratories where bench‑top force testing, material checks and assembly verification are performed; its compact range and robust load capability make it versatile across production testing and R&D tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
140mm Test Stand Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of a high-capacity 100,000 N load range, a precise 0–140 mm measurement span and modern data connectivity for efficient, repeatable testing; delivered calibrated to ISO 17025 with certificate. Order the test stand directly via Metav Werkzeuge or consult our specialists for tailored advice. Test stand — Manual and hydraulic test rig with 2.4" colour touchscreen (Microtech Metrology) The Test stand is a manual and hydraulic force testing rig designed for materials testing and quality assurance applications, offering a compact 0–140 mm travel range and integrated digital data output. ISO 17025 calibration with certificate Max. 100,000 N test force 2.4" colour touchscreen display Wireless and USB data output Calibrated precision that reduces inspection uncertainty The unit is supplied fully ISO 17025 calibrated, which means a traceable calibration certificate accompanies the delivery and the results can be integrated confidently into quality documentation. The certified calibration eliminates the time-consuming step of third-party testing before first use and supports compliance in regulated production environments. With a defined travel span of 0–140 mm, the rig is suitable for repeatable displacement-controlled tests where reproducibility matters. Modern data handling to speed up workflows A 2.4" colour touchscreen presents readings and menus clearly, while Wireless and USB outputs allow direct connection to data loggers and laboratory information systems. The digital display and outputs support automated data capture, reducing transcription errors and enabling faster statistical process control. Integration of the digital interface improves traceability and accelerates test cycles, which in turn increases throughput in incoming inspection and routine QA tasks. High force capacity and flexible operation for diverse tasks The construction supports a maximum test force of 100,000 N, giving sufficient capacity for a wide range of component and material tests. The combined manual and hydraulic operation modes permit controlled, low-speed tests as well as higher-force procedures without changing core equipment. The robust design and clear force-rating make the rig appropriate for R&D labs, production sampling and contract testing providers who need a dependable, compact test solution. For high-capacity, certified testing choose Microtech Metrology's Test stand (SKU 235152107) — Metav Werkzeuge in Emmerich supplies the unit calibrated to ISO 17025 and can advise on integration and delivery to your workshop. Technical data Article number: 235152107 GTIN: 4061905456572 ECLASS: 21170601 Type: Manual and hydraulic Facts Max. load: 100000 N Measurement range: 0–140 mm Display size: 2.4" (colour touchscreen) Special features Digital display Wireless and USB data output Delivered calibrated to ISO 17025 with certificate Suited for materials testing and quality assurance FAQ What calibration documentation is supplied with the test stand? The test stand is delivered with an ISO 17025 calibration certificate, confirming traceability and allowing immediate use in accredited test workflows. Which data outputs are available for logging test results? Measurements can be exported via Wireless and USB interfaces from the test stand for archiving and analysis in lab software. What is the maximum force capacity and suitable applications? The rig supports up to 100,000 N, making it suitable for component testing, material characterisation and production quality checks. How large is the test travel and what does it mean for specimen size? The instrument provides a 0–140 mm travel range, which accommodates most small- to medium-sized specimens and fixtures used in materials and component testing. Is the touchscreen sufficient for setting up automated test sequences? The 2.4" colour touchscreen gives straightforward control and readout; combined with the digital outputs it enables scripted data capture and integration into automated test routines. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
140mm Test Stand Manual And Hydraulic, Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of robust force capacity, precise stroke control and certified calibration to secure reliable test results and traceability. Order the unit directly via Metav Werkzeuge or consult the team for application-specific advice. Test stand — Manual and hydraulic unit with 50 kN capacity and Colour 2.4" touchscreen (Microtech Metrology) The Test stand is a manually and hydraulically operated bench test rig intended for force and profile testing in laboratories and production environments, offering a compact stroke range for component and material inspections. 50 kN maximum test load capacity Colour 2.4" touchscreen display Wireless and USB data output Delivered with ISO 17025 calibration certificate High-capacity mechanics for repeatable force testing Built around a rated 50 kN load capacity, this bench rig combines manual and hydraulic actuation to handle a wide spectrum of static tests. The limited stroke range of 0–140 mm concentrates stiffness where it matters, reducing deflection and improving reproducibility for force measurements on small to medium-sized parts. The construction supports common workshop workflows in material testing, component qualification and fixture verification, while the compact footprint keeps the unit accessible on a busy test bench. The clear specification of load capacity and measuring range enables planners to match the rig to specific test requirements with confidence. Simple operator interface and exportable test data A modern Colour 2.4" touchscreen provides immediate read‑out and basic control, while the unit’s digital display architecture allows straightforward logging. Wireless connectivity and USB output enable fast transfer of measurement records to lab software or networked storage, facilitating documentation and trend analysis without lengthy manual transcription. The combination of an intuitive interface and standardised data ports supports efficient test cycles and simplifies acceptance procedures in quality control environments. Calibrated delivery and suitability for regulated workflows The test rig is supplied fully calibrated, with an ISO 17025 certificate included, ensuring traceability to national standards and reducing lead time before first use. This documented calibration is particularly valuable where compliance and auditability are required, allowing the unit to be integrated into accredited measurement routines immediately after installation. The calibrated state, paired with the robust actuation concept, makes this test stand a practical choice for laboratories, production sampling and incoming inspection tasks where documented measurement quality is essential. For precision testing with documented traceability, contact Metav Werkzeuge to discuss the Microtech Metrology test stand (SKU 235152057) and arrange delivery from our Emmerich centre — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 235152057 GTIN: 4061905456565 Manufacturer: Microtech Metrology Type: Manual and hydraulic Digital display: Colour 2.4" touchscreen Data output: Wireless, USB Facts Maximum load: 50,000 N Measuring range: 0–140 mm Calibration: ISO 17025 certificate included Digital: yes Special features Colour 2.4" touchscreen interface Wireless and USB data export Manual and hydraulic operation Category: 2D profile measuring device FAQ What test forces can be applied with this test stand? The test stand from Microtech Metrology is rated for a maximum static load of 50 kN, suitable for a wide range of component and material tests. Is the unit ready for use on delivery with traceable calibration? Yes, the device is delivered fully calibrated and includes an ISO 17025 calibration certificate, allowing immediate integration into documented measurement procedures. How can measurement data be exported from the unit? Measurement data can be transferred via Wireless connection or USB output provided by the unit, enabling straightforward logging and archiving. Which measuring range does the rig cover and what applications suit it best? The rig covers a stroke of 0–140 mm, making it well suited to small and medium-sized parts testing, bench-top material verification and profile checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150 mm Granite Surface Table 300x200 mm With Ø28 mm Column And Ø18 mm Crossarm, DIN 876/0 - Metav IndustryLine
Data inconsistency detected: the product label includes a "150 mm" designation while the supplied technical specification states a measuring range of 0–190 mm. This contradiction affects the correct classification and the resulting product description, so a full, standards‑aligned text cannot be produced until the discrepancy is resolved. Please confirm whether the "150 mm" notation is a model reference or the intended maximum measuring range, and verify the exact plate and column dimensions and the cross‑arm configuration (fixed or movable). Once the correct measuring range and dimensional data are confirmed, a complete description will be prepared that includes the appropriate measuring class, technical data, conformity notes and purchasing guidance. Please provide the clarified specifications to proceed; no assumptions about the product’s range or function have been made.
150 x 100 x 50 mm Granite Surface Table With Ø30x150 Column And 100 mm Articulated Arm, DIN 876/0 - Metav IndustryLine
The combination of a granite top to DIN 876/0, a precise fine adjustment mechanism and a rigid Ø30 × 150 mm column ensures stable, repeatable set-ups for inspection and fixture work. Order the granite measuring table directly via Metav Werkzeuge or ask our consultants for tailored application advice. Granite measuring table 150 x 100 x 50 mm – column Ø30×150, 100 mm arm (M208.150.1) by Metav IndustryLine Granite measuring table 150 x 100 x 50 mm (M208.150.1) offers a compact, stable reference surface for workshop inspection and fixture setup across machining and metrology tasks Granite surface to DIN 876/0 Fine height adjustment for repeatable set-ups Column Ø30 × 150 mm for robust support 100 mm measuring arm for localised reach Stability and reproducible reference for precision work A solid granite plate specified to DIN 876/0 provides a thermally stable, wear‑resistant measuring surface that minimises deformation under load. The top dimension of 150 × 100 mm gives a compact but usable work area that is easy to position on benches or inspection stands; combined with the overall mass of the assembly, the result is reduced vibration and improved measurement repeatability. Such a foundation is especially beneficial where fine tolerances must be verified without elaborate fixturing. Accurate positioning and controlled adjustment The integrated fine adjustment allows slow, controlled vertical movements of the measuring arm, permitting delicate alignment and precise approach to a measurement target. The Ø30 × 150 mm column delivers axial stiffness and secure guidance, while the 100 mm measuring arm gives the reach needed for local inspections and setting tasks without sacrificing rigidity. These elements together support a workflow where setup time is reduced and measurement variance from operator handling is minimised. Workshop integration and practical benefits Designed for use in machine shops, inspection benches and assembly fixtures, the unit's compact footprint supports flexible placement and straightforward handling. The modest overall weight aids relocation between workstations while retaining the stability required for accurate checking. Supplied as a straightforward measuring assembly, it suits routine quality assurance, small‑batch inspection and fixturing tasks where a reliable, flat reference is essential. Contact Metav Werkzeuge for an individual specification check or a quotation from our Emmerich warehouse to ensure this granite measuring table fits the intended application Technical data Article number: M208.150.1 GTIN: 4054469151540 Category: Messtisch Core dimensions & figures Table top: 150 × 100 × 50 mm Measurement range: 0–100 mm Column: Ø30 × 150 mm Measuring arm reach: 100 mm Weight: 6 kg Standard: DIN 876/0 Materials & special features Surface material: granite plate Fine adjustment: yes Aufnahme: 8 Ausladung: 85 FAQ What measurement range does the granite measuring table cover? The measuring table covers a range of 0–100 mm and is classed for standard workshop measurement tasks with localised reach provided by the 100 mm measuring arm. Is the surface specification conformed to a recognised standard? Yes, the granite top is manufactured to DIN 876/0, providing a verified flat, stable reference surface for inspection and setting work. Does the unit include a fine adjustment mechanism? The assembly includes a fine adjustment feature to enable controlled vertical movement of the measuring arm for repeatable positioning. Which applications is this unit best suited for? The device is suitable for machine‑shop inspection, fixture set‑ups and quality assurance tasks where a compact, stable reference surface and short measurement reach are required. Can the granite measuring table be moved between benches? At approximately 6 kg it is compact enough for relocation between workstations while maintaining the mass needed for measurement stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500x1000x150/200mm Anti-Slip Feet for Measuring Table Frames, For 1500×1000×150/200 or 2000×1000×200/250mm Tables - Filetta
Take advantage of secure positioning and reduced measurement uncertainty through a purpose-built anti-slip solution for measuring plate frames; its compatibility with common plate formats and straightforward retrofitting keeps inspection workflows efficient. Order or request specification support via Metav Werkzeuge for reliable delivery and technical advice. Anti-slip for measuring plate frames — secure support for industrial measuring plates (Filetta) The Anti-slip for measuring plate frames provides slip-resistant support for measuring plates used on inspection benches and messtables across manufacturing and metrology environments. Fits 1500×1000×150/200 mm measuring plates Compatible with 2000×1000×200/250 mm plates Prevents lateral movement during inspection Stable support that improves measurement reliability The primary benefit is a visible reduction in lateral movement during setup, delivered by a slip-resistant contact interface that maintains the plate position under normal handling and probing forces. This stability directly contributes to improved measurement accuracy and repeatability, since uncontrolled micro‑shifts at the workpiece interface are a common source of measurement scatter. The design focuses on secure seating rather than permanent fixturing, so repeat measurements remain comparable while handling remains flexible for inspection sequences. Compatibility that minimises installation time Designed for quick integration with common measuring plate formats, the unit supports 1500×1000×150/200 mm and 2000×1000×200/250 mm plates used on standard messtables. The compact footprint and straightforward mounting concept enable retrofitting to existing measurement plate frames with minimal downtime, preserving workshop throughput. The compatibility with typical industrial plate dimensions ensures that calibration jigs and inspection setups need few adjustments, safeguarding process continuity during upgrades or replacement cycles. Robust design for the workshop environment Built for continuous use in inspection and production areas, the component provides a durable contact surface that resists wear while maintaining its slip resistance properties over repeated cycles. Delivered under the Filetta brand, the product is intended for integration into measurement benches and inspection fixtures where handling speed and positional security matter. Supply via an established distributor acts as a quality filter for the European market, supporting consistent availability and predictable integration into existing metrology fleets. Contact Metav Werkzeuge in Emmerich for tailored guidance on Filetta anti-slip solutions and to request technical specifications or a quotation via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: MS131.128 Manufacturer: Filetta Category: Messtisch Facts Compatible plate size: 1500 × 1000 × 150/200 mm Compatible plate size: 2000 × 1000 × 200/250 mm SKU: MS131.128 Special features Slip-resistant support for measuring plate frames Designed for inspection benches and messtables Simple retrofit installation FAQ How does the anti-slip unit affect measurement accuracy? The anti-slip unit for measuring plate frames reduces lateral movement at the plate interface and therefore lowers one common source of measurement variability; the Filetta anti-slip supports improved repeatability during inspection runs. Which plate sizes are supported by this solution? Supported formats include 1500×1000×150/200 mm and 2000×1000×200/250 mm, matching common industrial measuring plates for messtables and inspection benches. Can the anti-slip be retrofitted to existing measuring plate frames? Yes, the design permits straightforward retrofit to standard measuring plate frames, allowing integration into existing inspection setups with minimal adjustment. Is the unit suitable for continuous workshop use? The product is intended for industrial inspection environments and provides a durable, slip-resistant contact surface designed to withstand repeated handling and routine measurement cycles. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
150mm Granite Surface Plate 200x150x50mm With Ø30x200mm Column And 100mm Measuring Arm, DIN 876/0 - Metav IndustryLine
Take advantage of the combination of DIN 876/0 flatness, a 200 x 150 x 50 mm granite plate and an adjustable Ø30 x 200 mm column with fine adjustment for a reliable bench-top reference that speeds up inspection and set-up tasks. Order the M208.150.2 directly via Metav Werkzeuge or request specialist advice for immediate availability and delivery. M208.150.2 Granite Surface Plate — 200 x 150 x 50 mm plate with Ø30 x 200 mm column and 100 mm measuring arm (Metav IndustryLine) The M208.150.2 Granite Surface Plate is a compact inspection table designed as a stable reference plane for precision measuring and layout work in workshop and inspection environments. Granite plate 200 x 150 x 50 mm Accuracy class DIN 876/0 Ø30 x 200 mm support column 100 mm adjustable measuring arm Stable reference plane for reliable quality control A precision granite plate with the dimensions 200 x 150 x 50 mm provides a consistent, flat surface for layout and inspection. Certified to DIN 876/0, the table functions as a trusted reference for comparative and dimensional checks, helping to reduce rework and inspection variability. The overall unit weight of 8 kg keeps the assembly bench‑portable yet stable under standard workshop conditions, making it a practical choice for production control and tool set‑up tasks. The compact footprint is optimised for benches where space and repeatability are priorities. Flexible set-up with fine adjustment for accurate positioning The integrated Ø30 x 200 mm column and 100 mm measuring arm allow secure mounting and precise positioning of dial indicators, sensors or small fixtures. A built‑in fine adjustment mechanism enables micro‑positioning without the need for repeated manual tweaks, speeding up alignment and gauge set-up. This arrangement supports a variety of inspection workflows: the articulation provided by the arm simplifies transfer measurements and comparative checks while maintaining a stable reference from the granite plane. Compact design tailored for workshop efficiency With a measurement range of 0–150 mm, the unit covers everyday inspection tasks while remaining easy to handle and store. The design is tailored to provide the best compromise between reach and rigidity for bench‑top metrology: the modest plate size and column allow one‑person handling and fast deployment across different workstations. As part of Metav IndustryLine, this surface plate supports straightforward integration into small inspection cells and quality benches, offering dependable performance where space and usability matter. Contact Metav Werkzeuge for availability, delivery options from Emmerich and expert advice on integrating the M208.150.2 into existing inspection workflows Technical data Article number: M208.150.2 GTIN: 4054469151557 Category: Messtisch Material: Granite plate Weight: 8 kg Tariff number: 90173000 Core dimensions and range Plate dimensions: 200 x 150 x 50 mm Measurement range: 0–150 mm Column: Ø30 x 200 mm Measuring arm length: 100 mm Features Accuracy class DIN 876/0 Fine adjustment Compact bench‑top design Intended for inspection and layout work FAQ How flat is the surface and what standard applies? The plate meets DIN 876/0, providing a high‑precision flat reference plane suitable for routine inspection and layout use. Does the unit include fine adjustment for the measuring arm? Yes, the assembly features a fine adjustment mechanism on the column and arm to allow precise positioning during set‑up. What are the external dimensions of the plate and the weight for handling considerations? The granite plate measures 200 x 150 x 50 mm and the complete unit weighs 8 kg, enabling bench‑top use and straightforward handling. Which measurement range is supported by the table assembly? The indicated measurement range is 0–150 mm, covering common bench inspection and gauge set‑up tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x150x40 mm Granite Plate With 1x M8 Thread, DIN 876/0 - Metav IndustryLine
Take advantage of a compact, DIN 876/0 reference surface that combines stable dark granite construction with a standard M8 mounting thread for reliable fixture integration; order via Metav Werkzeuge or consult the Metav team for specification advice and delivery from Emmerich. Granite Plate 150 x 150 x 40 mm (DIN 876/0) with M8 Mounting — Metav IndustryLine The Granite Plate 150 x 150 x 40 mm (DIN 876/0) provides a compact, thermally stable reference surface for workshop and laboratory measurements, designed for use with standard M8 instrument stands. High-stability dark granite construction DIN 876/0 accuracy class reference surface Integrated 1x M8 mounting thread Repeatable measurements from a rigid reference surface Manufactured from dark granite, this compact reference surface is intended to deliver repeatable measurement results in inspection work and fixture set-up. The 150 x 150 x 40 mm footprint and 3.5 kg mass create a balance between portability and stability, making the plate suitable for bench‑top use where a flat, low‑wear surface is required. Conformance to DIN 876/0 signals that the surface meets recognised flatness and quality criteria, which supports consistent datum establishment and reduces setup time in routine workflows. Simple integration with stands and inspection rigs An integrated 1x M8 thread allows direct attachment to common measuring stands and fixtures without additional adapters, simplifying alignment of probes, indicators and microscopes. The threaded interface follows standard practice for instrument mounting, so the plate can be incorporated into existing test jigs or rolled into modular inspection stations with minimal fuss. This practical compatibility shortens assembly time and helps maintain a stable datum across repeated checks. Durable material benefits for everyday use Granite offers inherent advantages for metrology: wear resistance, low thermal expansion and passive vibration damping, all of which contribute to more reliable readings over time compared with softer surfaces. The plate’s material choice and compact dimensions make it well suited to routine quality checks, optical alignment tasks and small-assembly inspection, where a controlled reference plane improves process reliability and reduces rework. Choose the Metav IndustryLine granite plate for compact, standardised reference surfaces and contact Metav Werkzeuge for expert advice and supply from Emmerich. Technical Data Article number: M206.111 GTIN: 4054469103136 Category: Messtisch Facts Dimensions: 150 x 150 x 40 mm Weight: 3.5 kg Tariff code: 68022300 Special features Material: dark granite Mounting thread: 1x M8 Standard: DIN 876/0 FAQ What degree of flatness does this plate provide? The Granite Plate 150 x 150 x 40 mm is manufactured to DIN 876/0, which defines the plate as a high‑grade reference surface suitable for workshop and laboratory measurement tasks. Can the plate be mounted to a measuring stand? Yes, the plate features an M8 mounting thread designed for direct attachment to standard instrument stands and inspection rigs, allowing quick and secure integration. Is the material suitable for daily workshop use? The dark granite construction offers wear resistance and low thermal expansion, making the plate appropriate for regular quality checks and fixture set‑ups where dimensional stability matters. How portable is the reference surface for bench‑top work? With dimensions 150 x 150 x 40 mm and a weight of 3.5 kg, the reference surface is compact enough for bench‑top portability while providing the mass needed for a stable measuring base. Does the product include any protective case or special packaging? Standard delivery details are provided with the plate; consult Metav Werkzeuge for information on transport packaging options and any special handling recommendations for larger orders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Granite Surface Table 250x160x50 With Column Scale, DIN 876/0 - Metav IndustryLine
Take advantage of a stable granite reference, a scaled column for repeatable vertical positioning, and an integrated fine adjustment to speed up setup and increase measurement reliability; order the table directly via Metav Werkzeuge or consult their specialists for configuration advice. M208.148 — Metav IndustryLine Granite Measurement Table with Scaled Column (250×160×50 mm) The M208.148 is a granite measurement table designed for workshop metrology, offering a flat granite surface and a scaled column to support repeatable height settings and precise fixturing. Granite surface plate 250×160×50 mm Scaled column for repeatable vertical positioning Fine adjustment for micro alignment Complies with DIN 876/0 flatness class Stable reference surface for reproducible results A heavy granite surface provides a thermally stable and vibration-damping reference that minimises measurement drift during routine checks. The 250×160×50 mm plate offers a flat, wear-resistant base that supports gauges, jigs and small assemblies with high stability. Compliance with DIN 876/0 indicates the flatness class and gives a verifiable benchmark for quality control, helping to reduce uncertainty in repeat inspections and to maintain traceable results in the workshop. Precise vertical positioning with a scaled column and fine adjustment The integrated scaled column (Ø35×220 mm) allows for fast, repeatable vertical alignment of fixtures and measuring heads, while the cross arm (Ø20×25.5 mm) supports compact probe holders or indicators. The built-in fine adjustment enables micro-positioning without the need for constant re-clamping, so setups are faster and less prone to human error. With a measuring range of 0–160 mm, the assembly suits common bench-top metrology tasks where controlled vertical travel and repeatability are essential. Practical handling and workstation benefits With a compact footprint and a robust granite base, the table is easy to incorporate into test benches and assembly stations. The surface geometry simplifies reference transfers and alignment tasks, reducing secondary operations during inspection. The combination of granite surface and a scaled column makes the unit particularly useful for toolrooms, small-batch production monitoring and incoming inspection, where quick, reproducible set-ups lower cycle times and increase throughput. Conformance to standards and typical applications Built to the recognised flatness class DIN 876/0, this measuring table is suitable for precision layout, small-part inspection and fixture set-up in mechanical workshops and quality departments. The construction supports repeatable comparison measurements, gauge checks and positional verification tasks. As a Metav IndustryLine product, the unit complements a broader range of metrology accessories and mounting options, helping to standardise measuring practices across the shop floor. For dependable shop-floor metrology, choose the Metav IndustryLine M208.148 granite measurement table and contact Metav Werkzeuge in Emmerich for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M208.148 GTIN: 4054469105017 Material: Granite plate Surface dimensions: 250×160×50 mm Measuring range: 0–160 mm Standard: DIN 876/0 Special feature: Scaled column Facts Column diameter × usable length: Ø35×220 mm Cross arm diameter: Ø20×25.5 mm ECLASS: 21170604 Special features Fine adjustment for micro positioning Scaled column for repeatable vertical setup Granite surface plate for thermal stability and vibration damping Conforms to DIN 876/0 Brand: Metav IndustryLine FAQ What is the usable vertical travel on the table? The M208.148 offers a measuring range of 0–160 mm, enabling controlled vertical travel for a variety of bench-top inspection and fixturing tasks. Is the surface accuracy certified? The table is manufactured to meet DIN 876/0 flatness class, which provides a clear standard for surface accuracy and ensures the granite base is suitable for repeatable reference measurements. Can the table be used for mounting dial indicators or small probes? Yes. The scaled column and cross arm support common indicator mounts and compact probe holders, while the fine adjustment facilitates precise positioning without repeated re-clamping. Which workshop tasks suit this measurement table best? The M208.148 is ideal for toolroom layout, small-part inspection, repeat gauge checks and fixture set-ups where a stable granite reference and repeatable vertical positioning improve workflow efficiency. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision and stability for reliable measurement results
A measurement table provides the essential reference surface for precise dimensional inspection in machine shops, metalworking and quality assurance. Selected and configured correctly, a measurement table ensures consistent flatness, repeatability and a stable basis for comparative measurement tasks.
How the system works and where it’s indispensable
The primary role of a measurement table is to act as a flat, stable datum for handheld gauges and fixed measuring stands. Typical constructions include granite plates, cast-iron plates, and versions prepared for integration with a height gauge or a dedicated stand. In inspection rooms and workshops a well-chosen metrology table reduces measurement scatter by isolating the part from bench vibration and by providing a reliably machined reference plane for both manual and semi-automatic checks.
Tangible benefits that improve daily production
- Increased measurement repeatability by providing a stable reference surface, reducing rework and scrap.
- Faster setup and alignment when used with a height gauge or measuring stand, cutting throughput time for routine checks.
- Robustness and wear resistance from materials such as granite plates or cast-iron plates, extending service intervals.
- Compatibility with common inspection tools, making the inspection table a versatile centrepiece for quality workflows.
Why Metav is the practical choice for workshops and industry
Metav combines industry expertise with wide availability, making precision accessible without compromising quality. From its Emmerich location Metav acts as a quality filter for the European market, supporting over 48,000 customers and offering more than 250,000 products for measurement and workshop equipment. That breadth ensures the right measurement table solution is available alongside complementary metrology accessories, delivered with straightforward order handling and dependable stock management.
Quick summary
A properly specified measurement table — whether a granite plate, a cast-iron plate or a version adapted for a height gauge — is a foundational investment for accurate, efficient inspection. Metav offers the range and expertise to match the right table to the application.
FAQ
Which material is best for my measurement table?
Choice of material depends on use: granite plates are favoured for thermal stability and wear resistance, while cast-iron plates provide cost-effective rigidity. Select a measurement table material that suits your workshop environment and inspection frequency.
Can a measurement table be used with a height gauge?
Yes. Most measurement table designs are compatible with a height gauge or measuring stand; look for tables prepared with mounting or clamping options to secure the gauge and maintain repeatable set-ups.
How should I maintain a measurement table to preserve flatness?
Regular cleaning, avoidance of point impacts and controlled storage conditions help preserve the reference surface. For critical processes, schedule inspection and calibration of the inspection table according to internal quality procedures or industry standards.
What makes Metav a reliable supplier for metrology tables?
Metav combines decades of sector knowledge with a comprehensive product range from Emmerich, offering consistent quality control, broad selection and supply reliability for the workshop or production floor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com