Precision surface plates for exact measurement and inspection
A precision surface plate provides a stable reference for dimensional inspection and layout, enabling accurate measurement and improved quality control across metalworking and engineering shops. These granite and cast-iron surface plates and their complementary inspection tables are used with height gauges and stands to support repeatable measurements on machined components, delivering flatness and rigidity that reduce setup time and measurement error. Designed for calibration and inspection tasks, the systems enhance process reliability when checking tolerances and part geometry.
175mm Rectangular Measuring Table 115x98mm Height 207mm With Dust Grooves - Metav IndustryLine
Combine sturdy construction, a hardened, ground and lapped measuring plate and integrated dust grooves for reliable, repeatable positioning in the workshop. Order the measuring table directly via Metav Werkzeuge or consult our specialists for application advice. Measuring table M208.143 — rectangular measuring plate 115 × 98 mm, 0–175 mm range (Metav IndustryLine) Measuring table M208.143 is a compact, hardened measuring stand with a rectangular plate and dust grooves, designed for workshop inspection, fixture set‑up and precision alignment tasks. Hardened, ground and lapped plate Compact rectangular measuring plate 115 × 98 mm Measuring range 0–175 mm Dust grooves for contamination control Accurate reference surface for everyday inspection The core of this measuring stand is its hardened, ground and lapped measuring plate, which provides a stable, wear‑resistant reference for repeated use. The compact rectangular measuring plate (115 × 98 mm) combines surface flatness with easy handling, so bench and jig set‑up remain reproducible over time. Flatness and surface finish translate directly to lower measurement uncertainty when using dial gauges, comparators or small probes, supporting consistent quality control on the shop floor. Stable mounting and precise positioning for fixtures A defined mounting interface with an 8 H7 bore and the robust column and cross‑arm dimensions ensure secure attachment of probes and fixtures. The column (Ø28 × 230 mm) and cross arm (Ø18 × 190 mm) give the assembly mechanical stiffness and predictable behaviour under load, improving repeatability during alignment operations. The overall height of 207 mm affords practical access to the workpiece while keeping the centre of gravity low for stable measurement procedures. Designed to reduce downtime and contamination risk Integrated dust grooves channel swarf and debris away from the measuring surface, reducing the need for frequent re‑finishing and lowering the risk of false readings due to contamination. The combination of protective grooves and the plate’s finished surface minimises maintenance and keeps calibration intervals realistic for workshop environments. Classified within the Standard measuring range (0–300 mm), this unit fits the typical requirements of machine‑building and metalworking inspection benches where reliability and low upkeep are priorities. Contact Metav Werkzeuge in Emmerich for tailored advice on the M208.143 measuring table, available delivery options and calibration services; telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M208.143 GTIN: 4054469104935 eClass: 21170604 Weight: 7.4 kg Facts Measuring range: 0–175 mm Measuring plate: 115 × 98 mm Height: 207 mm Special features Material: hardened, ground and lapped Mounting: 8 H7 Cross arm: Ø18 × 190 mm Column: Ø28 × 230 mm Dust grooves present FAQ What measuring range does this table cover? The measuring capacity is 0–175 mm, making the M208.143 suitable for standard workshop inspection tasks. What are the dimensions of the measuring plate and how is it finished? The measuring plate measures 115 × 98 mm and is hardened, ground and lapped to provide a durable, flat reference surface. Are there features to protect the measuring surface from chips and dust? Yes, the table is supplied with dust grooves, which help keep the measuring surface clear of swarf and contamination. How is the table mounted and what attachment options exist? Mounting is via an 8 H7 bore; the unit includes a stiff column (Ø28 × 230 mm) and cross arm (Ø18 × 190 mm) for secure fixture attachment and probe positioning. For which workshop applications is this measuring table intended? This measuring stand is aimed at machine shops, fixture set‑up and general inspection benches where a compact, stable reference and low maintenance are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180mm Manual Test Stand Color 2.4" Touchscreen Wireless/USB ISO 17025 Calibrated - Microtech Metrology
Taking advantage of ISO 17025 traceable calibration together with a 500 N capacity and compact 0–180 mm measurement range ensures reliable, reproducible force testing for workshop and lab tasks; the integrated Wireless and USB outputs plus a colour touchscreen simplify data capture and documentation. Order the Test stand directly via Metav Werkzeuge or ask our consultants if needed. Test stand – manual force test stand with 500 N capacity and 2.4" colour touchscreen (Microtech Metrology) A Test stand for manual force and displacement testing in standard workshop and laboratory environments, fitted with a 2.4" colour touchscreen and Wireless + USB data output for flexible measurement workflows. Calibrated per ISO 17025 with certificate 500 N maximum load capacity Colour 2.4" touchscreen display Wireless and USB data output Traceable accuracy for routine quality control The test rig delivers repeatable results by combining a robust load path with an industry‑grade calibration. Calibrated to ISO 17025, the instrument is supplied with a calibration certificate, providing traceability for internal audits and external quality checks. With a measurement range of 0–180 mm and a readout resolution of 0.001 N, the unit supports fine force discrimination while remaining straightforward to operate. This level of documentation and resolution suits workshops that require audit‑ready evidence of measurement performance. Fast, reliable data capture for process integration Data transfer is handled via Wireless and USB interfaces, allowing direct logging into test software or portable recorders without interrupting the measurement routine. The colour 2.4" touchscreen presents results clearly and speeds up parameter entry, reducing transcription errors and saving time during repetitive testing. Because the device is digital and manually operated, it bridges bench stability and operator control—ideal where simple, reliable data export accelerates reporting and process control. Built for everyday workshop handling and operator confidence The manual operation and compact dimensions favour bench mounting and straightforward handling during component checks or fixture validation. A maximum force capacity of 500 N covers a wide range of small‑to‑medium force tests common in maintenance, assembly and lab environments, while the compact measurement span keeps the instrument stiff and easy to manipulate. The digital display and clear outputs support quick decision making during production or inspection cycles. Practical compliance and provenance that matter Delivered calibrated according to ISO 17025, the device arrives ready for immediate use with documented accuracy. That accreditation, combined with the digital readout and export options, reduces setup time for traceable testing programmes. As part of a Metav supply chain, the product benefits from European distribution and the assurance of a quality filter based in Emmerich, helping to democratise precision for workshops and industry alike. Contact Metav Werkzeuge for tailored ordering and calibration options; Metav Werkzeuge can advise on configuration and delivery from Emmerich to meet specific inspection needs Technical data SKU: 278170056 GTIN: 4061905456190 Manufacturer: Microtech Metrology Type: Manual Display: Colour 2.4" touchscreen Data output: Wireless + USB Facts Maximum load: 500 N Measurement range: 0–180 mm Readout resolution: 0.001 N Special features Calibrated to ISO 17025 with calibration certificate Digital instrument with portable colour display Wireless and USB interfaces ECLASS: 21170601 Manual operation FAQ Is the device supplied ready for calibration traceability? Yes. The test stand is delivered calibrated to ISO 17025 and includes a calibration certificate for traceable documentation. What data interfaces are available for live logging? The unit offers Wireless and USB data output for direct export of measurements to compatible software or logging devices. What is the usable measurement range and force capacity? The instrument provides a measurement span of 0–180 mm and a maximum load capacity of 500 N, suitable for standard workshop and laboratory force tests. How fine is the readout resolution for force measurements? Force readings are shown with a resolution of 0.001 N, enabling precise discrimination for routine quality control. Can the test stand be used for both displacement and force checks? Yes; the design supports combined force and displacement monitoring within the stated measurement range and output options. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
180mm Test Stand Colour 2.4" Touchscreen, Wireless+USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of 1000 N capacity, 0.001 N resolution and Wireless + USB data output to secure reproducible force testing and traceable results; the included ISO 17025 calibration certificate supports audit-ready documentation. Order the test stand directly via Metav Werkzeuge or consult our advisors for tailored specification help. Test stand — Manual force test stand with 1000 N capacity and touchscreen control (Microtech Metrology) The Test stand is a compact, manually operated force test rig designed for precise force and displacement checks across workshop and laboratory applications. 1000 N maximum load 0.001 N resolution for fine measurement 2.4" colour touchscreen display Wireless and USB data output Precision force measurement with traceable results The rig delivers high-resolution force readings thanks to a 0.001 N display increment and a maximum capacity of 1000 N, which together permit reliable capture of small load changes while still covering common workshop requirements. The unit is supplied with an ISO 17025 calibration certificate, ensuring measurement traceability and suitability for quality assurance processes. Where applied in inspection routines or R&D, the combination of sub-millinewton resolution and accredited calibration reduces uncertainty and simplifies compliance with internal and external audit demands. Intuitive operation and streamlined data handling A 2.4" colour touchscreen provides direct control of test parameters and clear readout of live values, shortening setup times and lowering operator training effort. Data are exported via Wireless + USB, enabling immediate integration into lab PCs or networked data-collection systems without manual transcription. The manual drive mechanism maintains straightforward operation for repetitive checks, while digital outputs support statistical process control or long-term logging for trending and reporting. Built for workshop and laboratory workflows As a manually driven test rig, the device balances compactness and rigidity: the measurement range 0–180 mm offers sufficient travel for most component tests while keeping the assembly manageable in bench environments. The construction and documented performance make the unit suitable for incoming inspection, routine component verification and small-batch testing where repeatability and clear documentation are required. The unit’s specification aligns with common metrology lab practices and supports integration into broader quality-management routines. Quality assurance, documentation and compatibility Beyond raw performance, the system is configured for practical traceability: the ISO 17025 calibration is delivered with the instrument, stating that measurements can be referenced to accredited standards. Wireless and USB outputs ensure compatibility with modern measurement software or spreadsheet-based workflows, and the clear touchscreen reduces interpretation errors. Combined, these elements contribute to a dependable test process that supports both immediate decision-making and long-term record keeping. For precise force testing with Microtech Metrology’s manual test stand and its ISO 17025 calibration certificate, contact Metav Werkzeuge for a specification review and supply from our Emmerich quality hub. Technical Data Article number: 278170106 GTIN: 4061905456473 SKU: 278170106 Facts Max load: 1000 N Measurement range: 0–180 mm Resolution / reading increment: 0.001 N Digital display: 2.4" colour touchscreen Data output: Wireless + USB Calibration: ISO 17025 certificate included Special features Type: Manual test stand Digital: yes Manufacturer: Microtech Metrology Category: 2D profile measuring device FAQ What level of calibration is supplied with the instrument? The instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate from Microtech Metrology confirming traceable measurement performance. What is the smallest force change that can be resolved? Resolution is 0.001 N, permitting detection of very small force variations when using the manual test rig for fine measurements. How can measurement data be exported for analysis? Measurement data are available via Wireless + USB, allowing direct transfer to PCs or data-collection systems for further statistical evaluation. Is the unit suitable for both workshop checks and laboratory use? Yes; the combination of 1000 N capacity, fine resolution and accredited calibration makes the test stand appropriate for routine workshop verification and laboratory-level quality assurance. What travel or stroke is available for displacement-based tests? The device provides a measurement range of 0–180 mm, offering sufficient travel for most component-level force and displacement checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
180mm Test Stand With Portable Colour 2.4" Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a fully traceable test solution combining 1000 N capacity with a 0.001 N reading resolution and on-delivery calibration to ISO 17025; order this calibrated instrument directly via Metav Werkzeuge or consult with our specialists for integration advice. Teststand manual force test stand with colour touchscreen, Microtech Metrology The Teststand is a manual force test stand designed for controlled component and material testing in workshop and laboratory quality environments, featuring a portable display and wireless/USB data output. 1000 N test force capacity Calibrated to ISO 17025 Colour 2.4" touchscreen display Wireless and USB data output Precise, traceable force measurement for quality control The unit delivers measurable confidence through a high-capacity load cell and fine resolution that supports detailed quality-control routines. With a maximum force of 1000 N and a reading resolution of 0.001 N, the device is suitable for repeatable tensile and compression checks in production sampling and incoming inspection. Delivery includes a full calibration and accompanying certificate to ISO 17025, ensuring traceability and compatibility with audit and conformity requirements; this reduces uncertainty in acceptance decisions and simplifies documentation for regulated processes. Faster data capture and integration into QA systems A compact colour 2.4" touchscreen and a portable display streamline operation and reduce manual transcription errors. The unit provides Wireless and USB data outputs for direct logging into laboratory software or inspection databases, enabling efficient batch testing and digital record keeping. This hands-on data handling reduces cycle time for routine tests and supports statistical process control by delivering machine-readable results immediately after each measurement. Workshop-ready manual design with practical handling benefits The manual operation and robust mechanical layout suit bench or stand-mounted use in both workshops and test benches; the construction facilitates consistent clamping and alignment, important for reproducible results on small assemblies. A compact footprint and portable display make the system easy to move between stations while maintaining industrial‑grade measurement capability, helping to lower rework rates and speed up throughput. The clear interface and calibrated delivery also give teams immediate confidence in measurement quality and documentation. Contact Metav Werkzeuge for application-specific advice and procurement of the Microtech Metrology Teststand — supplied calibrated to ISO 17025 with certificate and ready for immediate integration; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 278170107 GTIN: 4061905456480 Brand: Microtech Metrology Type: Manual test stand Facts Max. load: 1000 N Measuring range: 0–180 mm Resolution: 0.001 N Display: Colour 2.4" touchscreen Data output: Wireless, USB Digital: yes Calibrated: ISO 17025 (certificate included) Special features Portable display Manual operation Category: 2D profile measuring device Includes calibration certificate Stativ compatible (stand mounting) FAQ What calibration is supplied with the unit? The Teststand is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability and audit purposes. Which interfaces are available for data export? Data can be exported via Wireless and USB; the portable colour touchscreen display also supports on‑device review before transfer. What is the maximum force that can be applied? The device supports a maximum test force of 1000 N, suitable for a broad range of component and material tests. Is the display permanently fixed or portable? A portable display is included to allow flexible positioning and convenient readout during manual testing operations. Can the unit be used on a test stand or bench? The manual design is compatible with standard stands and bench mounting, providing stable alignment for reproducible measurements. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-102mm Runout Tester Two-Point Measurement 0.002mm Resolution, Max Workpiece Length 203mm - Metav IndustryLine
Take advantage of 0.002 mm measurement accuracy and a 20–102 mm measuring range combined with a grooved roll and manual handwheel for reliable series inspection; order the run‑out tester directly via Metav Werkzeuge or consult our specialists for integration advice. M208.211 Run‑out tester — 0.002 mm accuracy, 20–102 mm range (Metav IndustryLine) The M208.211 is a precision run‑out tester designed for fast assessment of radial and axial run‑out on shafts and cylindrical components during series inspection in workshop and production environments 0.002 mm accuracy for fine run‑out checks Measurement range 20–102 mm Grooved roll with two cuts for reliable seating Suitable for series measurements up to 203 mm Precise run‑out control that supports production quality The instrument delivers an accuracy of 0.002 mm, making it suitable where tight run‑out tolerances are critical. By converting radial deviations into repeatable indicator deflection, the device enables objective verification of concentricity and roundness on rotating parts. The 20–102 mm measurement range covers common shaft diameters while the 0.002 mm resolution reduces the need for secondary checks, supporting faster decision‑making in quality control. Emphasis on measurable accuracy helps to reduce scrap rates and rework, which in turn improves production throughput. Built for efficient series inspection and repeatability Designed for series applications, the tester is optimised for reproducible checks across batches. The grooved roll with two cuts secures components consistently and prevents slip during rotation, while the mechanical design keeps setup time low. Where repeatability matters, the combination of solid seating and accessible adjustment reduces operator influence on results, thereby increasing the reliability of comparative runs. This focus on consistent handling supports streamlined inspection routines and integrates well into existing in‑line or off‑line metrology stations. Practical handling and workshop compatibility A compact footprint and a manual handwheel enable controlled rotation and fine positioning without complex drive systems. The unit supports workpieces up to 203 mm in length and remains portable at approximately 5 kg, allowing transfer between benches or cells. Note that the device is supplied without a dial gauge or fine measuring device, so the indicator can be chosen to match the required resolution and display format. The tester is intended for series measurements and so prioritises robust, serviceable components that perform under regular use. Contact Metav Werkzeuge for tailored advice on integrating the M208.211 run‑out tester with 0.002 mm accuracy into production and to discuss suitable indicator options Technical data SKU: M208.211 GTIN: 4054469183732 Label: Run‑out tester 20–100 mm, 0.002 mm, grooved roll Note: Delivered without dial gauge or fine measuring device Core specifications Accuracy: 0.002 mm Measurement range: 20–102 mm Max workpiece length: 203 mm Weight: 5 kg Aufnahme: 8 Special features Grooved roll with two cuts Manual handwheel Measurements at two positions simultaneously possible Suitable for series measurements FAQ What run‑out accuracy can be expected from this tester? The M208.211 provides an accuracy of 0.002 mm, suitable for fine run‑out inspections and stringent quality control tasks. Which diameters can be measured with this device? The tester covers a measurement range of 20–102 mm, accommodating a wide span of common shaft and cylindrical part diameters. Is the device supplied ready for measurement or are additional parts required? The unit is delivered without a dial gauge or fine measuring device; the M208.211 accepts industry‑standard indicators so the display and resolution can be selected to suit the application. Can this instrument be used for series inspections on a production line? Yes, the M208.211 is intended for series measurements and its grooved roll and robust mechanics support repeated, reliable checks. What seating or fixation features support repeatability? A grooved roll with two cuts provides consistent seating of the workpiece, helping to reduce slippage and improve repeatability during rotational checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 x 200 mm Scribing Plate Gray Cast Iron, DIN 876/3 - Metav IndustryLine
A compact, DIN‑rated marking plate that delivers a 200 x 200 mm flat reference surface in grey cast iron, combining robust mass for vibration damping with a portable bench‑top footprint; ideal where repeatable scribing and layout are required. Order the marking plate directly via Metav Werkzeuge or ask our consultants if needed. Marking Plate M206.200 — 200 x 200 mm Grey Cast Iron, DIN 876/3 (Metav IndustryLine) The Marking Plate M206.200 is a compact grey cast iron layout plate designed for precise scribing, marking and small‑part inspection in toolrooms and machine shops. Compact 200 x 200 mm footprint DIN 876/3 surface accuracy Sturdy grey cast iron construction Ideal for workshop layout and marking Stable reference surface for accurate layout work The compact 200 x 200 mm surface provides a reliable flat reference surface for scribing and marking operations where space is limited but reproducibility is essential. Manufactured to DIN 876/3, the plate offers a defined flatness class that supports precise layout work and small‑part inspection. The combination of a true reference face and a modest footprint makes this plate suitable for bench use and for integration into existing measuring tables. Mass and material engineered for workshop durability Constructed from grey cast iron, the plate benefits from natural vibration damping and good wear resistance, which helps preserve the reference face under regular workshop conditions. With a mass of 7 kg, the unit remains stable during marking tasks yet is still manageable for repositioning on a workbench. The material choice reduces the risk of chatter during scribing and provides long‑term dimensional stability compared with lighter alternatives. Practical applications and handling advantages The plate supports common layout tasks in the toolroom and machine shop, such as edge scribing, punch placement and visual inspection of small components. Its compact size and solid mass make it a practical aid for repeatable setups, and the flatness class ensures results that are compatible with standard workshop metrology routines. The design suits workers who need a durable, easy‑to‑position reference without committing bench space to a full‑size surface plate. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine marking plate M206.200 — call +49 2822 7131930 or email info@metav-werkzeuge.com for delivery options and technical clarification Technical Data Article number: M206.200 GTIN: 4054469103273 Category: Messtisch Facts Dimensions: 200 x 200 x 25 mm Weight: 7 kg Material: Grey cast iron Special features Standard: DIN 876/3 Tariff number: 90178090 eClass: 21170605 FAQ What material is the plate made from? The plate is produced from grey cast iron, chosen for vibration damping and workshop durability. What are the exact dimensions and weight of the Marking Plate M206.200? The Marking Plate M206.200 measures 200 x 200 x 25 mm and has a mass of 7 kg. Which flatness standard does the plate meet? The plate is manufactured to DIN 876/3, providing a defined flatness suitable for layout and marking tasks. Which tasks is this plate suited to in a workshop environment? The plate is ideal for layout tasks, scribing, punch positioning and small‑part inspection in toolrooms and machine shops. Can the plate be used on a measuring table or bench without additional support? Yes — the compact size and 7 kg mass make the plate easy to position on a measuring table or bench while maintaining stable contact for repeatable measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Control Stand For KIA SIA KEA With Microcomputer Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of laboratory-grade accuracy, digital connectivity and a comprehensive weights set for dependable component testing; order the inspection station directly via Metav Werkzeuge or consult our product specialists for application advice. Control stand for KIA, SIA and KEA with microcomputer — Microtech Metrology, Wireless + USB The Control stand for KIA, SIA and KEA with microcomputer is a digital inspection station designed for repeatable force and geometry tests in quality control and laboratory environments. *ISO 17025-calibrated delivery included *Wireless and USB data output *High repeatability ±0.005 mm *Complete weights set for internal and external tests Consistent, certified measurement performance for quality control The inspection station delivers ISO 17025-calibrated results and is supplied with a traceable calibration certificate, providing a documented basis for acceptance testing and audit trails. With a reading resolution of 0.0001 mm and a measured repeatability of ±0.005 mm, the system is configured for repeatable comparative testing and process monitoring in serial production or laboratory use. Certification at this level reduces uncertainty in decision-making and supports compliance with formal quality procedures. Fast digital data transfer to streamline inspection workflows Equipped with Wireless and USB data outputs, the unit enables direct integration into measurement logs and statistical process control routines. The digital interface simplifies test data capture, eliminates manual transcription errors and shortens the reporting loop between workshop and quality management systems. As a result, the measurement bench enhances throughput and provides a robust digital record for traceability and analysis. Broad measurement coverage with supplied weights for KIA, SIA and KEA The device covers an internal measuring range of 20–200 mm and an external range of 10–140 mm, accommodating a wide variety of component sizes commonly encountered in component testing. Delivery includes a dedicated set of test masses: 22 weights (10–40 N) for internal SIA and KIA tests and 23 weights (12–40 N) for external KEA checks, enabling immediate setup for standardised test sequences. This completeness reduces setup time and ensures reproducible loading conditions during comparative checks. Built for both laboratory benches and production lines Designed as a digital control stand, the unit combines measurement rigidity with user-oriented operation for frequent testing cycles. The microcomputer control provides stable measurement routines while the compact footprint keeps bench-space requirements modest. Supplied as a fully calibrated instrument, the inspection station is suitable for incoming inspection, routine batch checks and laboratory verification tasks. For procurement, Metav Werkzeuge offers rapid supply from its Emmerich quality hub and supports selection with technical guidance and product documentation. Contact Metav Werkzeuge for a tailored quotation and ISO 17025-certified delivery of the Microtech Metrology control stand (SKU 255500007): info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 255500007 GTIN: 4061905456152 Manufacturer: Microtech Metrology ECLASS: 21170601 Data output: Wireless + USB Digital: yes Included accessories: 22x weights 10–40 N (internal SIA and KIA), 23x weights 12–40 N (external KEA) SKU: 255500007 Facts Measurement range internal: 20–200 mm Measurement range external: 10–140 mm Maximum measured range: 200 mm Minimum measured range: 10 mm Reading resolution: 0.0001 mm Repeatability: ±0.005 mm Special features ISO 17025 calibration certificate included Suitable for KIA, SIA and KEA testing routines Digital microcomputer control for repeatable sequences Wireless connectivity for integration into data systems Supplied ready for immediate testing with weights set FAQ Is the control stand delivered calibrated? Yes. The control stand from Microtech Metrology is supplied fully calibrated with an ISO 17025 calibration certificate, enabling immediate use in accredited testing environments. What are the exact measurement ranges for internal and external tests? The inspection station covers an internal range of 20–200 mm and an external range of 10–140 mm, suitable for a broad spectrum of components and fixtures. Which connectivity options are available for data capture? Measurement results can be exported via Wireless or USB interfaces, allowing direct logging into laboratory information systems or SPC tools. Are the test weights included sufficient for standard KIA, SIA and KEA procedures? Yes. The delivery includes the specified sets — 22 weights (10–40 N) for internal SIA and KIA and 23 weights (12–40 N) for external KEA — matching common test protocols for these devices. What level of repeatability can be expected during repeated measurements? The unit achieves a repeatability of ±0.005 mm, making it suitable for routine comparative testing and quality control tasks where consistency is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Granite Surface Plate 300x200x50mm With 30mm×245mm Column And 100mm Arm, DIN 876/0 - Metav IndustryLine
Granit construction combined with a slim, adjustable column and a compact measuring arm delivers a stable, workshop-ready reference surface; benefit from precise set-up, reliable flatness and a small footprint for routine inspection. Order directly via Metav Werkzeuge or consult the team for application advice. Granite surface table M208.150.3 – granite surface table, 300 x 200 x 50 mm, Ø30 mm column Granite surface table M208.150.3 offers a compact, durable reference surface for inspection, assembly and gauging tasks in machine shops and quality control environments Granite plate 300 x 200 x 50 mm Ø30 mm column with fine adjustment 100 mm measuring arm, 85 mm reach Engineered flatness for consistent reference measurements The granite plate is manufactured to the DIN 876/0 class, providing a stable, low-wear surface for repeatable measurements and fixture work. Granite resists thermal distortion and surface wear better than many metals, which keeps reference planes consistent over long service intervals. For workshop use, this means less rework: parts can be referenced and aligned directly on a surface that preserves flatness under normal shop conditions. The solid plate thickness also dampens vibration, improving the quality of comparative checks and visual inspections. Adjustable column and arm for precise, repeatable positioning An Ø30 x 250 mm column with fine adjustment and a 100 mm measuring arm permit controlled vertical and lateral set-up of gauges or probes. The arm reach of 85 mm (ausladung) and the compact mounting arrangement make the table suited to small-to-medium components while maintaining a low centre of gravity. The unit’s mass (approx. 12 kg) contributes to rigidity during tactile or contact checks. These attributes reduce setup time and minimise measurement scatter, enhancing throughput in routine inspection tasks where repeatability matters most. Practical design tuned to shop workflows and inspection benches Built for everyday metrology, the table’s 300 x 200 x 50 mm working area fits bench-top installations without sacrificing useful measuring space. The combination of a durable granite surface and an adjustable column supports a range of tasks from visual inspection and runout checks to fixture set-up and small-assembly alignment. The compact footprint and robust construction make the table an efficient choice for production lines, toolrooms and R&D benches where a reliable datum plane is required alongside easy repositioning and stable clamping capability. Choose the Metav IndustryLine granite surface table for a robust, space-efficient reference system and contact Metav Werkzeuge for ordering and detailed application guidance. Technical data Article number: M208.150.3 GTIN: 4054469151564 Weight: 12 kg Material: Granite plate Standard: DIN 876/0 Numbers / Core technical data Plate dimensions: 300 x 200 x 50 mm Column: Ø30 x 250 mm Measuring arm: 100 mm Reach (ausladung): 85 mm Mounting / Aufnahme: 8 Measuring range: 0–200 mm Special features / Versions Fine adjustment included Compact bench-top footprint Suitable for inspection, alignment and assembly tasks Metav IndustryLine product family FAQ What flatness class does this table meet? The granite surface table M208.150.3 is specified to DIN 876/0, which denotes a high flatness class suitable for general workshop and inspection tasks. Can the column be adjusted precisely for repeatable set-ups? Yes, the Ø30 x 250 mm column on the M208.150.3 includes a fine adjustment feature to aid repeatable positioning of gauges and fixtures. Is the surface plate suitable for routine shop use and small assemblies? The granite plate (300 x 200 x 50 mm) on the M208.150.3 is designed for workshop conditions, offering wear resistance and thermal stability for routine inspection and assembly work. What is the usable reach of the measuring arm and how does it affect applications? The measuring arm provides a 100 mm span with an 85 mm lateral reach, allowing positioning over small to medium components while keeping the datum close to the plate for stable checks. Does the table require a special mounting or heavy-duty bench? The M208.150.3 is bench-compatible thanks to its compact footprint and approximately 12 kg mass; it is suitable for standard inspection benches without special foundations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Granite Surface Table With Dial Indicator, 150x150mm Table, Mechanical Central Clamp, DIN 876/0 - Metav IndustryLine
Compact yet robust granite measuring table with a 150 × 150 mm top, a 0–200 mm measurement range and a 0.01 mm dial gauge for dependable inspection and setup work; combine stable reference geometry with fine adjustment and mechanical central clamping for reproducible results. Order this measuring table directly via Metav Werkzeuge or consult our specialists for application guidance. Granit measuring table with dial gauge M208.139 — 150 × 150 mm top, 0–200 mm range (Metav IndustryLine) A Granit measuring table with dial gauge M208.139 designed for accurate height and flatness checks in workshop inspection, fixture set-up and quality control tasks. Granite surface 150 x 150 mm Measuring range 0–200 mm Dial gauge resolution 0.01 mm Mechanical central clamping Reliable reference geometry for repeatable measurements The combination of a granite plate and a compact 150 × 150 mm top yields a naturally stable reference that resists thermal distortion and vibration. The table is manufactured to DIN 876/0, which guarantees flatness and parallelism within defined limits; this makes the unit suitable for workshop inspections and incoming goods checks where a stable datum is essential. The integrated analog dial offers a 0.01 mm reading, providing clear visual feedback for dimensional comparisons and set‑ups. Precise clamping and micro‑positioning for consistent results A mechanical central clamping system secures the workpiece quickly while preserving the reference geometry, and the built‑in fine adjustment enables micro‑positioning without losing contact. These features reduce operator‑induced variation and shorten setup times, which benefits production environments that demand consistent batch inspection. The compact mass (approx. 4.7 kg) and multiple mounting points support stable placement on benches or stands while keeping handling manageable. Practical integration into inspection and toolroom workflows With a measuring range of 0–200 mm and a compact footprint, the unit suits typical machine‑shop tasks such as checking gauge blocks, verifying fixture heights and aligning small assemblies. The analog dial gauge includes a lift lever for easy repositioning and rapid zeroing against standards. As an inspection instrument it complements digital calipers and micrometres by providing a rigid reference plane for comparative measurements and functional checks. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine granite measuring table into existing inspection routines and to arrange fast delivery from our Emmerich warehouse Technical data Article number: M208.139 GTIN: 4054469168357 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Table top: 150 x 150 mm Resolution: 0.01 mm Weight: 4.7 kg Standard: DIN 876/0 Special features Material: Granite plate Dial gauge: analog with lift lever Mechanical central clamping Fine adjustment Mounting points: 8 eClass: 21170604 Tariff code: 90178090 FAQ What accuracy can be expected from this granite measuring table? The granite measuring table with dial gauge (Metav IndustryLine, SKU M208.139) provides visual resolution to 0.01 mm; manufactured to DIN 876/0 it offers a reliable reference surface for routine inspection and comparative measurements. Is the dial gauge suitable for workshop use or only for laboratory conditions? The analog dial is robust and designed for workshop environments; combined with the granite top and mechanical clamping it is intended for everyday inspection, setup and toolroom tasks. How does the mechanical central clamping benefit measurement repeatability? Central clamping fixes the workpiece with minimal movement of the reference plane, reducing repositioning error and improving repeatability during batch checks and alignment operations. Can the unit be integrated with existing stands or benches? Yes; the table’s compact footprint, approximate weight of 4.7 kg and the included mounting points allow straightforward placement on benches, small stands or stative fixtures for fixed inspection stations. What typical applications suit this measuring table? Common uses include height checks of small components, fixture and gauge set‑up, comparator measurements and quality control of machined parts in production and incoming inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Inspection Stand For KIA SIA KEA With USB, ISO 17025 Calibrated, Includes Calibration Certificate - Microtech Metrology
The combination of high-resolution measurement, ISO 17025 traceability and straightforward data export supports reliable in‑line quality checks and reduces rework. Order the inspection stand directly via Metav Werkzeuge or consult the team for application guidance. Inspection stand for KIA, SIA and KEA — ISO 17025 calibrated, USB output Inspection stand for KIA, SIA and KEA offers a compact, calibrated fixture for consistent 2D profile checks across workshop and production environments. ISO 17025-calibrated with certificate included USB data output for system integration 0.001 mm resolution for fine measurement Repeatability 0.005 mm for stable results Accurate, traceable results that protect production yield A focus on measurable performance makes this inspection stand ideal where conformity matters. The system delivers 0.001 mm display resolution together with a repeatability of 0.005 mm, providing the precision required for routine profile verification and small-feature inspection. Because the device is ISO 17025 calibrated and supplied with a calibration certificate, measurement results are fully traceable for audits and quality records, minimising the risk of non-conforming parts and costly rework. Fast data flow and straightforward workshop integration The device is a digital solution with a USB data output, enabling direct transfer of measurement data into SPC or inspection software and reducing manual transcription. Supplied are tailored test weights for both internal and external checks, which facilitates repeatable force application during tactile tests and standardises repeat measurement procedures. The combination of digital output and supplied accessories accelerates inspection cycles and simplifies documentation in a production setting. Designed for standard workshop ranges and continuous use With an internal measuring range of 20–200 mm and an external range of 10–140 mm, the unit fits the Standard measurement range category (suitable for the everyday needs of machine and metal workshops). This reach offers a practical balance between measuring coverage and mechanical stability, so checks on typical components, fixtures and housings can be performed reliably. The instrument’s classification and robust construction make it well suited to frequent use in assembly, incoming inspection and process control. For traceable quality checks and ordering, contact Metav Werkzeuge in Emmerich for product advice and delivery arrangements via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 255500001 GTIN: 4061905456145 Manufacturer: Microtech Metrology Data output: USB Digital system: yes Calibration: ISO 17025 certificate included Core measurements Resolution: 0.001 mm Repeatability: 0.005 mm Measuring range (internal): 20–200 mm Measuring range (external): 10–140 mm Special features 2D profile measurement device Supplied weights for internal and external tests Calibrated to ISO 17025 with certificate Designed for workshop and production use FAQ What is the measurement range of the inspection stand? The inspection stand provides an internal measuring range of 20–200 mm and an external range of 10–140 mm, covering the standard workshop requirements for profile checks. Is a calibration certificate supplied with the device? Yes — the system is delivered fully calibrated to ISO 17025 and includes the official calibration certificate for traceability. How is measurement data exported from the device? Measurement data are exported via USB, allowing direct integration with inspection and SPC software for streamlined data handling. Which accessories are included for testing? The delivery includes supplied weights for both internal and external tests to ensure consistent test force and repeatable results during tactile inspections. Which manufacturer produces this inspection stand and what is the SKU? This inspection stand is produced by Microtech Metrology and is listed under SKU 255500001. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200x150 mm Granite Surface Table With Ø22x180 mm Column, Ø18x140 mm Cross Arm, DIN 876/0 - Metav IndustryLine
Take advantage of a precision granite base, a compact 200 x 150 mm working surface and an adjustable cross arm for accurate, repeatable inspections; order the measurement table directly via Metav Werkzeuge or consult the sales team for configuration advice. Measurement table with granite plate M208.145 — 200 x 150 mm granite base, DIN 876/0 The Measurement table with granite plate M208.145 offers a compact, rigid inspection platform for workshop measurement tasks and small‑part fixture work Granite plate to DIN 876/0 precision Compact 200 x 150 mm working surface Cross arm fixed or movable Column diameter Ø22 mm for rigid support Stable foundation for reproducible measurements A natural granit surface provides thermal stability and vibration damping that metal bases cannot match; this ensures low drift during successive checks. The plate conforms to DIN 876/0, which denotes a high flatness grade and a reliable reference plane for visual inspection, dial indicator checks and optical comparators. Specified flatness reduces setup uncertainty and shortens the time spent compensating for surface irregularities, delivering measurable gains in process reliability. Compact layout that fits the workshop flow The 200 x 150 mm working surface combines a small footprint with practical reach, ideal for bench‑level inspection and assembly tasks where space is at a premium. The instrument supports a measurement range of 0–130 mm, while the cross arm (Ø18 x 140 mm) is available either fixed or movable to position probes or gauges precisely over the workpiece. The column diameter Ø22 mm gives a stable bearing for the arm, and the table’s modest mass of 2.15 kg allows relocation between stations without specialized handling equipment. Built for inspection, fixture mounting and repeat checks Designed as a stable datum for quality control, the platform suits tasks such as runout checks, small‑part alignment, gauge zeroing and comparative measurement. The granite surface accepts clamping fixtures and magnetic or mechanical holders used in metrology benches, while the cross arm facilitates off‑centre measurements without complex fixturing. In production and repair shops where repeatability and throughput matter, this measurement table reduces setup variation and helps standardise inspection routines — an efficient option for integration into existing measuring processes. Contact Metav Werkzeuge GmbH for specification checks and delivery options for the M208.145 measurement table — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply arrangements Technical data Article number: M208.145 GTIN: 4054469104966 Customs tariff number: 90173000 Measurements Plate size: 200 x 150 mm Measurement range: 0–130 mm Weight: 2.15 kg Cross arm: Ø18 x 140 mm Column diameter: Ø22 mm Special features Material: granite plate Flatness standard: DIN 876/0 Cross arm: fixed or movable Category: measurement table (Messtisch) FAQ What flatness standard does the granite plate meet? The granite plate complies with DIN 876/0, providing a high flatness grade suitable for reference measurements and repeatable inspection tasks with the M208.145 measurement table. What is the usable working area and measurement range? The working surface is 200 x 150 mm and the instrument supports a measurement range of 0–130 mm, making it suitable for small to medium inspection tasks. Is the cross arm adjustable? The cross arm can be supplied fixed or movable (querarm fest oder verschiebbar) to allow flexible probe positioning for off‑centre or interior measurements. Can the measurement table be used for fixture mounting and indicators? Yes, the granite surface and cross arm are designed to accept common metrology fixtures and indicator holders for comparative checks and alignment work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200x150x50mm Granite Plate With 1x M8 Thread, DIN 876/0 - Metav IndustryLine
The stable combination of dark granite construction and DIN 876/0 flatness delivers a durable, low-maintenance measuring base with integrated mounting; order the granite plate directly via (Metav Werkzeuge) or ask our consultants if needed. Granite plate M206.115 — Compact DIN 876/0 surface plate with 1×M8 mounting thread (Metav IndustryLine) The Granite plate M206.115 serves as a compact, high-stability surface plate for workshop inspection, fixture set-up and comparator work, supplied to the DIN 876/0 accuracy class and fitted with a central M8 thread for secure attachment to indicator stands. DIN 876/0 accuracy class Compact 200 x 150 x 50 mm size Dark granite resists wear and thermal drift Integrated 1×M8 mounting thread Stable base for repeatable measurements A surfaced measuring base made from dark granite gives excellent thermal stability and natural damping, which reduces the impact of shop-floor disturbances on sensitive readings. The 200 x 150 x 50 mm footprint and substantial mass provide a secure platform for dial indicators and small fixtures, while the DIN 876/0 classification documents the flatness standard that underpins reliable comparative measurements. These attributes make the plate suitable for quality checks and setup tasks where consistent reference across repeated cycles is essential. Secure mounting and practical workshop use Fitted with an 1×M8 threaded mounting point, the plate accepts common indicator stands and holding devices directly, enabling a compact, repeatable arrangement of gauge and part. The thread location and the plate’s rigid body reduce relative motion between instrument and workpiece, improving measurement repeatability. The material's resistance to abrasion keeps functional surfaces intact with minimal upkeep, so routine cleaning and gentle handling are usually sufficient to preserve performance over years of typical workshop use. Why this surface plate improves day-to-day workflows Built as part of the Metav IndustryLine range, the plate offers a pragmatic balance of precision, robustness and space economy for machine shops and inspection benches. The relatively low maintenance of granite and the clear compliance with DIN 876/0 support efficient inspection cycles and reduce downtime related to reference drift. For operations seeking a dependable small-format surface plate that integrates easily into existing gauge setups, this solution represents a compact, long-lived measuring base that prioritises reproducible results. Choose the Metav IndustryLine granite plate for a dependable measuring foundation — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M206.115 GTIN: 4054469181264 Manufacturer: Metav IndustryLine SKU: M206.115 Facts Dimensions: 200 x 150 x 50 mm Weight: 9.4 kg Thread: 1×M8 Standard: DIN 876/0 Tariff code: 68022300 Special features Material: dark granite Central mounting thread for indicator stand Compact surface plate for workshop use Durable and wear-resistant surface FAQ What tolerance or flatness class does this surface plate meet? The plate meets the DIN 876/0 flatness specification; the Metav IndustryLine granite plate M206.115 is supplied to that standard for consistent reference measurements. Can the plate be mounted to an indicator stand? Yes, the product includes a central 1×M8 mounting thread for direct attachment of indicator stands and comparable fixtures, enabling secure setups. Is the granite surface suitable for heavy workshop environments? The dark granite construction of the Metav IndustryLine surface plate resists abrasion and offers good thermal stability, making it appropriate for standard workshop inspection and setup tasks with normal handling precautions. How large and heavy is the plate for bench allocation? The measuring base measures 200 x 150 x 50 mm and weighs 9.4 kg, providing a compact yet stable footprint for bench or cabinet placement. Does the plate require special maintenance or calibration on delivery? The granite surface requires only routine cleaning; calibration details are standard for the product. For specific calibration documentation requests, consult Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
215mm Universal Dial Indicator Stand Adjustable Cross Arm Ø12x180 Base 220x58x35mm - Metav IndustryLine
Take advantage of a robust combination of precise positioning and a stable footprint: the stand’s 215 mm measuring column, micro fine adjustment and a wide 220 x 58 x 35 mm base ensure repeatable set‑ups and reliable dial‑gauge alignment. Order the unit directly via Metav Werkzeuge or request tailored advice from our consultants. Universal dial gauge stand M208.140 (Metav IndustryLine) – 215 mm column, 180 mm cross arm Universal dial gauge stand M208.140 for workshop and bench metrology, designed to secure and position dial indicators for repeatable comparative and inspection tasks Stable 220 x 58 x 35 mm base for firm siting Micro fine adjustment for precise positioning 215 mm column for extended measuring reach Adjustable cross arm with Ø12 x 180 mm profile Stable foundation for repeatable measurements A firm base is the first prerequisite for precise manual inspection. The 220 x 58 x 35 mm base provides a low centre of gravity and consistent siting on a workbench, reducing vibration and movement during measurement. Combined with the Ø14 x 215 mm column, the stand supplies adequate height for common inspection tasks while remaining compact enough for tight benches. The clear numeric dimensions make it simple to plan fixturing and ensure that the stand integrates with existing gauging arrangements. Precise positioning and micro adjustment for fine work For comparative and setup tasks, small positional changes matter. The integrated micro fine adjustment permits smooth, incremental movement of the gauge holder along the column and arm, enabling controlled approach and exact contact without repeated coarse corrections. This feature improves reproducibility for small‑tolerance checks and speeds up alignment when switching between similar parts. The combination of coarse positioning and fine adjustment reduces the time spent on set‑up and increases throughput in inspection routines. Flexible reach with a compact footprint A compact cross arm with a Ø12 x 180 mm profile offers useful lateral reach while keeping the stand manoeuvrable. The geometry balances reach and stiffness so that the indicator can be positioned over most components typically inspected on a bench, without the stand becoming unwieldy. At a weight of 3.75 kg, the arrangement is heavy enough to stay put during measurement but light enough for repositioning when the workflow requires it. The design suits both repetitive shop checks and one‑off comparative measurements in production controls. For precision bench metrology supplied under the Metav IndustryLine, contact Metav Werkzeuge for product availability and application guidance from Emmerich’s specialist team. Technical data Article number: M208.140 GTIN: 4054469104904 Eclass: 21170601 Customs tariff number: 90314990 Manufacturer: Metav IndustryLine Numbers Base dimensions: 220 x 58 x 35 mm Column: Ø14 x 215 mm Cross arm: Ø12 x 180 mm Weight: 3.75 kg Special features Fine adjustment mechanism for incremental positioning Compact footprint for bench mounting Cross arm for lateral reach and alignment Suitable for dial gauge mounting and comparative inspection FAQ Which dial indicators are compatible with this stand? The Universal dial gauge stand M208.140 accepts standard dial indicators and common gauge holders; the arm and column geometry are suited to typical workshop gauges used for comparative and set‑up tasks. Does the stand include a fine adjustment mechanism? Yes, the M208.140 is supplied with a micro fine adjustment mechanism to permit precise, controlled movement of the indicator for repeatable measurements. What are the physical dimensions and weight of the stand? The base measures 220 x 58 x 35 mm, the column is Ø14 x 215 mm and the cross arm Ø12 x 180 mm; the stand weighs 3.75 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
225mm Indicator Stand With Tiltable Column, Fine Adjustment, Swivel Tailpiece, Supplied In Case - Filetta
Take advantage of precise positioning, a fine-adjustment control and a secure swallow-tail clamp for lever-type dial gauges to speed up inspection tasks and ensure repeatable results; order the Filetta MS910.493 directly via Metav Werkzeuge or consult our specialists for application guidance. Filetta MS910.493 indicator stand — inclinable column with fine adjustment for inspection benches The MS910.493 indicator stand is a compact, inclinable measuring stand designed for reliable checks of squareness and straightness in workshop and inspection environments, supplied without a lever-type dial gauge. Inclinable column Ø14.5×190 mm for angular checks Fine-adjustment control for precise positioning Swallow-tail clamp for lever-type dial gauges Delivered in a transport case for secure handling Accurate positioning with controlled fine movement The stand’s fine-adjustment mechanism delivers micro‑movements that reduce overshoot and allow exact zeroing of measuring instruments, which shortens setup time and improves throughput during repetitive inspections. The inclinable column (Ø14.5×190 mm) and 120 mm cross arm give a compact footprint while enabling versatile probe placement, so repeatable readings for squareness and straightness checks are achieved with minimal rework. Designed for consistent squareness and straightness verification Built around a rigid column and a stable cross arm, the device supports lever-type dial gauges via a swallow-tail clamp, maintaining alignment during contact measurements. This configuration reduces measurement variability caused by probe movement and ensures a reliable reference when assessing parts or assemblies; the result is a tangible reduction in measurement uncertainty during routine quality control. Workshop-ready transport and practical compatibility Supplied in a protective transport case, the unit arrives ready for safe storage and movement between workstations. The compact 225 mm overall height and 120 mm arm reach make the stand suitable for bench-top inspection and integration into measurement fixtures. Note that the product is supplied without a lever-type dial gauge, allowing selection of the gauge grade and resolution that best fits the inspection task. Contact Metav Werkzeuge to discuss integrating the Filetta MS910.493 into inspection routines or to receive tailored advice from our technical team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: MS910.493 Product: Indicator stand / measuring stand Brand: Filetta Note: Delivery without lever-type dial gauge Delivery: Supplied in a transport case for secure handling Facts Overall height: 225 mm Cross arm length: 120 mm Column: Ø14.5 × 190 mm Special features Fine-adjustment control for precise positioning Swallow-tail clamp for lever-type dial gauges Suitable for squareness and straightness checks Compact bench-top format FAQ How is the Filetta MS910.493 best used for squareness checks? The stand is designed to hold a lever-type dial gauge in a stable position while the probe traverses the test surface; by using the inclinable column and fine adjustment, the gauge can be aligned precisely to measure deviations from 90°. Can the stand be transported between workstations without damage? Yes, the delivery includes a protective transport case that secures the stand for movement and storage, reducing risk of impact or misalignment during handling. Is a lever-type dial gauge included with the unit? No, the Filetta MS910.493 is supplied without a lever-type dial gauge so that the user may fit the gauge that matches the required resolution and tolerance class. What workshop environments is the stand suitable for? Its compact dimensions and rigid clamp design make the stand ideal for bench-top inspection in machine shops, tool rooms and quality control labs where squareness and straightness must be verified. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
250mm Granite Surface Table 300x200mm Plate, Column Ø25mm, DIN 876/0 - Metav IndustryLine
Take advantage of a stable granite reference surface, a compact 300 x 200 mm plate and a rigid column to secure repeatable measurements and streamlined inspection workflows; order the granite measuring table directly via Metav Werkzeuge or ask our consultants if needed. Granite measuring table M208.149 — granite surface plate with Ø25 mm column and DIN 876/0 accuracy A compact granite measuring table designed for workshop metrology and small‑batch inspection tasks, combining a 300 x 200 mm reference surface with a rigid column support for repeatable positioning and measuring ranges up to 0–250 mm Granite plate 300 x 200 mm DIN 876/0 flatness accuracy Column Ø25 mm, 300 mm height Stable 14.1 kg base mass Dependable reference plane for accurate shop measurements The granite plate offers a thermally stable, wear‑resistant reference surface that minimises deformation under typical workshop conditions. Conforming to DIN 876/0, the top face provides a defined flatness class suitable for calibre checks, small jig alignment and component inspection. With a compact footprint of 300 x 200 mm and a substantial mass of 14.1 kg, the table resists vibration and local loading—so measurements remain consistent without elaborate fixturing. The 0–250 mm measuring range supports a broad set of routine checks while keeping the assembly highly manoeuvrable on a bench or inspection table. Rigid support and practical reach for fixture mounting A solid column with a Ø25 mm shaft and 300 mm effective height secures measuring heads, dial gauges or other instruments at a reproducible position. The lateral reach, given by a 120 mm cross arm and effective projection, permits placements for comparative and height checks without intrusive setup changes. This mechanical arrangement reduces setup time and ensures that repeat measurements are taken from the same datum, which increases throughput in production sampling and quality control tasks. The design emphasises mechanical stability and simple integration with common test equipment used in machine shops. Optimised for everyday metrology and workshop reliability Constructed to serve as a dependable inspection base, the unit supports quick transitions between tasks and tolerates the demands of a busy workshop environment. The granite surface resists coolant and most shop contaminants, simplifying maintenance and preserving the DIN 876/0 flatness over time. Identifiable as model M208.149, the table suits bench‑level quality assurance, incoming inspection of small components and jigs, where a compact, flat and stable surface speeds up decision making and reduces rework. The overall specification focuses on measurable benefits: reproducible measurements, low upkeep and robust handling characteristics. Contact Metav Werkzeuge to discuss how the M208.149 granite measuring table fits existing inspection routines or to arrange procurement from our Emmerich distribution centre. Technical Data SKU: M208.149 GTIN: 4054469105024 Weight: 14.1 kg Material: Granite plate Standard: DIN 876/0 Core measurements Plate size: 300 x 200 mm Measuring range: 0–250 mm Column: Ø25 x 300 mm Cross arm (querarm): 120 mm Projection (Ausladung): 115 mm Aufnahme: 8 Design & features Stable granite reference surface Rigid column support for measuring heads Compact footprint for bench use Workshop‑suitable mass for vibration damping FAQ What flatness standard does this granite measuring table meet? The granite measuring table conforms to DIN 876/0, delivering a defined flatness class appropriate for routine shop inspection and reference checks using the M208.149. Which plate dimensions and weight should be expected? The unit has a 300 x 200 mm granite plate and a mass of 14.1 kg, providing a compact yet stable reference suitable for bench‑level metrology. Can the column accommodate common dial gauges and test probes? Yes; the Ø25 mm column with a 300 mm effective height is intended to accept standard mounts and measuring heads typically used in workshop inspection setups. For which measuring range is the table designed? The specification lists a measuring capability of 0–250 mm, matching small component inspection and fixture checks where a compact reference surface is advantageous. Which applications are best suited to this model? The M208.149 is well suited for component inspection, jig and fixture alignment, incoming part checks and routine quality control tasks that require a compact, stable reference surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Scribing Plate Gray Cast Iron DIN 876/3 - Metav IndustryLine
Take advantage of the robust grey cast iron construction, the DIN 876/3 accuracy grade and the compact 250 x 250 mm working surface to streamline marking and layout tasks on the shop floor; order directly via Metav Werkzeuge or contact our advisers for specification matching and availability. Marking Plate M206.201 — Cast iron marking plate, 250 x 250 mm (DIN 876/3) — Metav IndustryLine The Marking Plate M206.201 is a compact cast-iron surface designed for precise scribing and layout work in workshops and inspection benches, offering a stable base for reproducible marking operations. Cast iron construction, DIN 876/3 accuracy Working surface 250 x 250 mm Stable, low-vibration mass 10 kg Suitable for layout and scribing tasks Stability that secures repeatable layout work The heavy grey cast iron body provides intrinsic damping and a dimensionally stable base, which is essential when producing repeatable scribed lines or transfer marks. Certified to DIN 876/3, the surface quality ensures a defined level of flatness, reducing systematic layout errors and improving first-pass accuracy. For routine shop use this means fewer reworks: the inherent mass and stiffness of the plate absorb tool and hand vibrations so that markings remain consistent across repeated operations. Compact footprint with workshop-friendly handling With a 250 x 250 mm working surface and a mass of 10 kg, the M206.201 combines a compact footprint with sufficient weight to resist displacement during marking. The modest overall dimensions make the plate easy to position on benches or measuring tables while providing enough surface area for small to medium components. The plate’s mass contributes to a low centre of gravity, simplifying clamping and alignment without sacrificing portability for bench-level workflows. Integration into daily inspection and layout routines The cast-iron surface lends itself to both manual layout and use as a stable reference for comparison checks. Its classification under normal measuring-table categories makes the plate a practical choice for machinists and toolroom technicians who require a durable reference plane for scribing, centre-finding and marking operations. The straightforward construction minimises maintenance—regular cleaning and avoidance of corrosive agents will preserve the surface geometry—and the product’s clear technical specification supports predictable procurement and inventory planning. For availability, delivery options and matching accessories for the Metav IndustryLine marking plate M206.201, contact Metav Werkzeuge in Emmerich for tailored advice and prompt order processing. Technical data Article number: M206.201 GTIN: 4054469103280 Tariff number: 90178090 Category: Messtisch Facts Dimensions: 250 x 250 mm Weight: 10 kg Overall height: 60 mm Material: Grey cast iron Standard: DIN 876/3 Special features Grey cast iron construction Accuracy grade DIN 876/3 Suitable for scribing and layout work Compact measuring surface for benches Thumbnail image available FAQ What is the primary use of this plate? The Marking Plate M206.201 from Metav IndustryLine is intended for precise scribing, layout and transfer marking on small to medium components in workshop and inspection contexts. What level of flatness or accuracy can be expected? The plate is produced to the DIN 876/3 specification, giving a reliable flat reference suitable for routine layout and inspection tasks where defined flatness tolerance is required. What are the exact dimensions and weight? The working surface measures 250 x 250 mm and the plate weighs 10 kg, dimensions that balance stability with bench-level portability for everyday use. Is the plate suitable for heavy-duty workshop environments? Yes. The grey cast iron construction offers good wear resistance and vibration damping, making it suitable for repeated layout work in standard machine-shop conditions. How should the surface be maintained to preserve accuracy? Regular cleaning to remove chips and coolant residues, protection from corrosive agents and careful handling during transport will help preserve the surface geometry and prolong service life of the plate. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
280mm Granite Surface Table With 400x250mm Granite Top, Fine Adjustment, Adjustable Digital Readout, DIN 876/0 - Metav IndustryLine
Take advantage of the combination of a granite measuring surface 400×250 mm, a 0–280 mm measuring range with handwheel and an adjustable digital display for steady, repeatable inspection tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Measuring table with granite plate 400×250 mm (M208.147) — Granite-top measuring table, 0–280 mm range, digital readout (Metav IndustryLine) The Measuring table with granite plate 400×250 mm, Messbereich 280 mm with Stellrad, Feineinstellung, Digital-Anzeige is a precision inspection table intended for workshop and quality‑control use, combining a stable granite surface with a user‑friendly handwheel and an adjustable digital display Granite measuring surface 400×250 mm Measuring range 0–280 mm with handwheel Fine adjustment for controlled positioning Adjustable digital display, 0.01 mm resolution Conforms to DIN 876/0 for plate flatness Stability and repeatability from a true granite top The granite support ensures a low‑vibration, thermally stable reference plane that reduces measurement drift during routine checks. The granite plate 400×250 mm sits on a solid base that resists wear and warping, which improves repeatability for small to medium workpieces. Specified to DIN 876/0, the surface flatness and grade are suitable for workshop metrology where consistent reference geometry is required; this is particularly relevant for parts inspection and set‑up tasks where a stable datum shortens cycle times and lowers rework rates. Controlled movement and fine positioning for accurate inspection Coarse positioning is provided via a handwheel while the integrated fine adjustment permits delicate alignment of the carriage, making it straightforward to centre and hold components. The digital readout offers an adjustable display with a standard 0.01 mm increment for clear readings and an overall declared accuracy of 0.03 mm, which aligns with common industrial measurement tolerances. This combination of coarse and fine control reduces operator error and speeds repeatable set‑up, delivering measurable efficiency gains on the shop floor. Practical design for inspection benches and fixtures Designed as a standard class measuring table (measuring range up to 300 mm), the unit bridges everyday workshop needs and more demanding inspection tasks without overcomplicating operation. The swivelling arm (250×12×10 mm, 90°) allows flexible probe or fixture mounting, and the 400×250×50 mm table footprint provides a compact but usable surface for gauges, v‑blocks and small components. At 27 kg the assembly remains stable during measurement yet is manageable for positioning on benches or into inspection fixtures. Why this table suits production and quality departments The combination of a heavy‑mass granite top, a precise drive and a clear digital indicator supports faster decisions at the inspection stage, reducing bottlenecks in final checks and set‑ups. The display’s adjustable readout makes the table compatible with different measuring routines and documentation requirements, while the DIN 876/0 specification gives procurement and quality teams a verifiable standard to reference when defining acceptance criteria. Contact Metav Werkzeuge for a specification review or tailored delivery plan — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M208.147 GTIN: 4054469160702 Brand: Metav IndustryLine Material: granite support table Table size: 400×250×50 mm Measuring range: 0–280 mm Accuracy: 0.03 mm Resolution (display): 0.01 mm Weight: 27 kg Norm: DIN 876/0 Arm: 250×12×10 mm, swivel 90° Facts Measuring range: 0–280 mm Table top: 400×250×50 mm Arm dimensions: 250×12×10 mm Weight: 27 kg Accuracy: 0.03 mm Resolution: 0.01 mm GTIN: 4054469160702 ECLASS: 21170604 Special features Granite support table for thermal and mechanical stability Handwheel for coarse feed and fine adjustment for precision Digital display with adjustable readout value Swivelling arm (90°) for flexible mounting Conforms to DIN 876/0 flatness class Tariff code: 90314990 FAQ What is the declared accuracy and resolution of this measuring table? The measuring table (M208.147) is specified with an accuracy of 0.03 mm and a display resolution of 0.01 mm, suitable for standard workshop inspection tasks. Which type of workpieces is this unit aimed at? This granite‑top measuring table from Metav IndustryLine is designed for small to medium components and bench inspection work where a 0–280 mm measuring range and a stable reference plane are required. Does the table include fine adjustment and coarse feed control? Yes, the unit features a handwheel for coarse positioning and a dedicated fine adjustment mechanism to permit precise alignment and controlled measurement steps. Is the granite plate certified to a flatness standard? The granite plate complies with DIN 876/0, delivering a verified flatness grade appropriate for repeatable metrology and fixture set‑up. Can the digital readout be adapted to different measurement routines? The digital display on the M208.147 allows the display reading to be adjusted, which helps integrate the table into varied inspection procedures and documentation requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 x 200 mm Surface Plate, Grey Cast Iron, DIN 876/3 - Metav IndustryLine
A compact, DIN‑grade grey cast iron marking plate (300 × 200 × 25 mm) gives a stable, flat reference surface for scribing and small-part inspection; its 8 kg mass damps vibration for repeatable layout work. Order the plate directly via Metav Werkzeuge or consult our specialists for integration into measuring benches and inspection tables. Marking surface plate M206.202.1 — Grey cast iron, 300 x 200 x 25 mm (DIN 876/3) The Marking surface plate M206.202.1 is a compact, DIN‑grade reference plate for scribing, layout and small-component inspection on shop benches and measuring tables Compact 300 x 200 x 25 mm working surface DIN 876/3 grade flatness for reliable reference Robust grey cast iron construction, 8 kg mass Suitable for marking, inspection and layout work Stable reference that improves repeatability The 300 x 200 x 25 mm footprint provides a compact yet stable reference surface that fits common workbenches and measuring tables. Machined from grey cast iron, the plate benefits from inherent damping and wear resistance, which reduces micro‑vibration during marking or inspection. Conformance to DIN 876/3 ensures the surface meets defined flatness criteria for cast‑iron plates, providing a dependable baseline that helps cut rework and speeds up routine layout tasks. Practical advantages for the workshop A small, robust plate delivers measurable time savings in everyday workflows: quick set‑up, straightforward positioning and a predictable datum for repeated scribing or gauging operations. The plate’s mass (8 kg) stabilises tool contact and hand movements, while the compact dimensions keep handling easy and storage straightforward. For inspection benches where space is limited, a compact reference like this optimises bench real estate without sacrificing the flatness needed for consistent results. Durable build and standards alignment Constructed in grey cast iron to industry standard DIN 876/3, the component is engineered for longevity on the shop floor. The material choice balances hardness and machinability, offering a surface that resists everyday wear yet can be reconditioned by standard maintenance processes when required. As a standardised measuring reference, the plate supports layout, visual inspection and small‑part checking tasks where a reliably flat surface is essential. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine marking surface plate fits inspection workflows and to arrange supply from our Emmerich warehouse Technical data Article number: M206.202.1 GTIN: 4054469103303 ECLASS: 21170605 HS/Tariff number: 90178090 Core dimensions & weight Dimensions: 300 x 200 x 25 mm Overall height: 60 mm Weight: 8 kg Materials & features Material: Grey cast iron Standard: DIN 876/3 Category path: Messgeräte › Messtisch FAQ What is the primary purpose of this plate? The marking surface plate M206.202.1 serves as a compact, flat reference for scribing, layout work and small‑part inspection on workshop benches and measuring tables. How does DIN 876/3 affect performance? DIN 876/3 defines permissible flatness tolerances for cast‑iron surface plates; compliance ensures the plate provides a reliable datum for routine inspection and marking tasks. Is the plate suitable for use on any workbench? The plate’s compact dimensions make it suitable for most benches and inspection tables; stable placement on a level surface is recommended to retain measurement repeatability. What maintenance does the plate require? Regular cleaning with a soft cloth and protection from heavy impacts preserves the surface; the grey cast iron construction is chosen for wear resistance and straightforward upkeep. Can the plate be used for small‑part quality checks? Yes—this plate provides a stable, flat reference for visual checks, marking and basic inspection of small components where a standardised reference surface is sufficient. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 x 300 mm Layout Plate, Gray Cast Iron, DIN 876/3 - Metav IndustryLine
Take advantage of the combination of grey cast iron robustness, DIN 876/3 flatness and a compact 300 x 300 mm footprint for dependable layout and marking work; order the marking plate directly via Metav Werkzeuge or ask our consultants if needed. Marking Plate M206.202 — Grey Cast Iron, 300 x 300 mm (Metav IndustryLine) The Marking Plate M206.202 is a compact grey cast iron surface plate designed for precise workshop layout and scribing tasks, ideal where repeatable marking and a stable reference plane are required. Compact 300 x 300 mm footprint DIN 876/3 flatness class Durable grey cast iron construction Stable 12 kg mass for vibration damping Precision where layout matters A compact surface that prioritises reproducible results, the 300 x 300 mm plate provides a stable reference for marking, drilling templates and small assembly jigs. The DIN 876/3 designation indicates defined flatness tolerances, which reduces cumulative layout error when transferring lines or datum points. The dense mass of the casting also contributes to vibration damping, allowing finer control during scribing operations and making the plate a reliable aid in repetitive workshop tasks. Compact size, easy integration The small footprint and moderate weight mean the plate fits on standard benches and measuring tables without occupying excessive space. With a nominal thickness of 25 mm and a total height of 60 mm, the design balances stiffness and portability: the 12 kg mass stabilises the workpiece while remaining manageable for repositioning. This combination supports efficient workflows in small-batch production, toolmaking and repair shops where bench real estate is at a premium. Robust material for everyday workshop use Manufactured from grey cast iron, the plate offers wear resistance and a stable thermal behaviour under normal workshop conditions. The material choice ensures a long service life for layout edges and reference faces; routine cleaning and light corrosion protection are typically sufficient to maintain performance. The constructive simplicity of the plate keeps maintenance straightforward while providing a dependable, low‑complexity reference surface. Built for dependable workshop performance The plate suits a range of practical applications: manual scribing, template checking, fixture set‑up and small-part alignment. Its compact dimensions permit use as a portable reference between workstations, yet the mass and casting quality ensure repeatable positioning once set. Backed by Metav IndustryLine’s distribution, this component integrates into procurement processes where traceable standards and consistent availability are required. For reliable layout results choose the Metav IndustryLine marking plate M206.202 — contact Metav Werkzeuge in Emmerich for ordering advice and delivery details. Technical data Item number: M206.202 GTIN: 4054469103297 eClass: 21170605 Tariff code: 90178090 SKU: M206.202 Facts Dimensions: 300 x 300 x 25 mm Total height: 60 mm Weight: 12 kg Special features Material: grey cast iron Standard: DIN 876/3 Intended use: marking and layout surface Category: measuring table / surface plate FAQ What flatness standard does this plate meet? The Marking Plate M206.202 conforms to DIN 876/3, which specifies the flatness tolerances relevant for workshop marking plates. Is the plate suitable for use on a standard workbench? Yes, the compact 300 x 300 mm footprint and the plate’s 12 kg mass make it suitable for stable bench use while remaining easy to reposition. How should the surface be cared for to retain accuracy? Regular cleaning to remove swarf and light protective oiling are recommended; the grey cast iron construction is straightforward to maintain for long service life. Can this plate be used for precision inspection tasks? The plate is designed primarily for layout and marking; its DIN 876/3 classification provides defined flatness, but it is not a replacement for higher‑grade inspection surface plates when laboratory‑level tolerances are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Granite Surface Plate Grade 0 DIN 876/0, Dark Granite, 50mm Thick - Metav IndustryLine
Take advantage of the combination of Grade 0 flatness, durable dark granite and a compact 300 × 300 × 50 mm footprint for a stable, low‑vibration reference surface; order the plate directly via Metav Werkzeuge or ask our consultants for application advice. Granite plate, 300 x 300 x 50 mm Grade 0 — precision granite surface plate by Metav IndustryLine The Granite plate, 300 x 300 x 50 mm Grade 0 is a compact precision reference surface designed for inspection, layout and calibration tasks in workshops and quality laboratories Grade 0 flatness per DIN 876 Dimensions 300 × 300 × 50 mm Mass 14 kg for vibration damping Stable reference for reliable dimensional checks The compact surface plate offers a true reference plane thanks to its Grade 0 specification, which denotes the highest flatness tolerance under DIN 876/0. For bench‑level quality control and tooling checks, a consistent datum plane is essential: the dark granite composition provides thermal stability and low wear, keeping the working surface unchanged over long periods. The substantial mass and stiffness reduce the influence of ambient vibrations, so measurements and layouts remain repeatable even in a busy workshop environment. Built for practical workshop handling and longevity At 300 × 300 × 50 mm and approximately 14 kg, this plate balances reach and manageability: wide enough for many small to medium components, yet compact for one‑person handling and safe storage. The natural stone surface resists scratching and is simple to keep clean, supporting precise probes and marking operations. Note that this item is supplied as a control plate only, without a frame or stand, making it suitable for integration into existing benches, stands or inspection jigs where a bespoke mounting solution is preferred. Easy integration into inspection workflows and fixtures The plate’s compact footprint and consistent material properties make it straightforward to use as a datum for visual inspection, scribing, or as a base for small fixtures. The robust granite surface minimises thermal expansion compared with many metallic plates, improving measurement stability across temperature changes. For traceable quality routines, the clear designation to DIN 876/0 simplifies documentation and acceptance criteria in quality records, while the solid construction supports repeated clamping and probing without notable deformation. For a reliable, workshop‑ready granite surface plate from Metav IndustryLine, contact Metav Werkzeuge to arrange supply and technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M206.102 GTIN: 4054469102931 Label: Granite plate, 300 x 300 x 50 mm Grade 0 Facts Dimensions: 300 x 300 x 50 mm Weight: 14 kg Standard: DIN 876/0 Tariff number: 68022300 Special features Material: dark granite Note: control plate only, without frame Category: Messtisch (measurement table) FAQ What tolerance class does this plate meet? The plate meets Grade 0 flatness according to DIN 876/0, providing a high‑precision reference surface suitable for demanding inspection tasks. Is the granite plate supplied with a stand or frame? The delivery includes the plate only; the item is a control plate without a frame or stand, allowing integration with existing fixtures or bespoke mounting solutions. How heavy is the plate and how does that affect use? Weighing approximately 14 kg, the plate offers good mass for vibration damping while remaining manageable for bench use and one‑person handling. Can the surface plate be used for calibration work? The plate’s Grade 0 flatness and DIN 876/0 designation make it appropriate as a reference surface in calibration routines, subject to the laboratory’s traceability and documentation procedures. What material is the plate made from and what are the benefits? Manufactured from dark granite, the plate provides low thermal expansion, high wear resistance and a stable measuring plane for long‑term use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Runout Tester For Diameters Up To 130mm, 16mm Travel Of Movable Tips, Cast Construction - Metav IndustryLine
Ensure consistent rotational accuracy with the combination of 0.01 mm measurement resolution, a cast-iron frame for vibration damping and a 16 mm travel of the movable centres; order the device directly via Metav Werkzeuge or consult our specialists for application advice. Runout tester M208.200 — 300 mm runout gauge for diameters up to 130 mm (Metav IndustryLine) A Runout tester M208.200 designed for precise rotational runout inspection of shafts and cylindrical components, ideal for workshop and small-series quality control. 0.01 mm resolution for precise runout checks Cast-iron frame and centres for stable measurements Movable centres travel 16 mm Suitable for diameters up to 130 mm Consistent, verifiable accuracy for quality control The core advantage is the 0.01 mm resolution, which makes the device suitable for standard workshop inspections and finer control tasks. Classified within the standard measuring range (up to 300 mm), this gauge offers a balance of reach and stiffness that fits routine machine‑shop use. In practical terms, the shown resolution allows operators to detect minute eccentricities that would otherwise pass unnoticed during manual assembly or balancing operations, supporting process decisions and reducing rework. Stable construction reduces measurement scatter Built with a cast-iron frame and centres, the apparatus delivers high intrinsic damping and resistance to thermal and mechanical influences. The substantial mass (weight 50 kg) and the defined structural geometry help to absorb vibration and keep the datum alignment stable during rotation. The result is improved reproducibility: repeated checks give consistent values, which simplifies statistical control and traceability in inspection logs and reduces uncertainty in final acceptance testing. Flexible centring and straightforward handling The device features measuring centres with a conical 60° tip and a movable-centre travel of 16 mm, enabling secure contact with a wide range of workpiece geometries without the need for complex fixtures. The cross arm (Ø10 x 150 mm) and column (Ø12 x 176 mm) dimensions provide a rigid support for the rotating part while allowing quick adjustments. For routine runout checks, the set-up time is minimised: once the component is supported between the centres, rotation and measurement can proceed immediately, which improves throughput in repetitive inspection tasks. Designed for workshop integration and reliability Engineered for daily industrial use, the gauge is optimised for rotational inspection of components up to 130 mm diameter within a 300 mm measuring envelope. The robust design and simple mechanical principle make maintenance straightforward and long-term operation economical. As part of the Metav IndustryLine range, the device benefits from a distribution and quality filter based in Emmerich, ensuring reliable availability and documentation for purchasers in Europe. Contact Metav Werkzeuge for bespoke advice on application and ordering of the Metav IndustryLine runout tester M208.200; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M208.200 GTIN: 4054469183541 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Maximum measurable diameter: up to 130 mm Accuracy / resolution: 0.01 mm Movable-centre travel: 16 mm Weight: 50 kg Overall length: 720 mm Cross arm: Ø10 x 150 mm Column: Ø12 x 176 mm Special features Cast-iron frame and centres Measuring centres 60° (height 176 mm) Suitable for rotational runout inspection Designed for workshop and small-series inspection FAQ How accurate is the runout measurement on this tester? The runout gauge offers a resolution of 0.01 mm, enabling detection of small eccentricities suitable for standard workshop quality control. What size of components can be inspected? Components with diameters up to 130 mm can be supported and checked within the device’s 300 mm measuring envelope. What advantages does the cast-iron construction provide? The cast-iron frame and centres increase damping and structural stability, improving reproducibility and reducing the influence of vibration on measurements. Does the device allow adjustment for different part geometries? Yes, the movable centres with 16 mm travel and the conical 60° measuring centres permit secure centring of a variety of cylindrical parts. Is the runout tester part of a defined product line? The device is supplied under Metav IndustryLine and is intended for reliable workshop integration and routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x200x50 mm Granite Plate With 2x M8 Thread, DIN 876/0 - Metav IndustryLine
A compact, stable reference surface with DIN 876/0 flatness and two M8 mounting threads ensures reproducible inspection results; the 300 × 200 × 50 mm format combines sufficient working area with manageable handling thanks to its 9.4 kg mass. Order the item directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Granite Plate M206.112 — 300 × 200 × 50 mm with 2 × M8 threads A granite plate designed as a flat reference surface for inspection, fixture set-up and precision measuring tasks in workshops and quality departments. Flat reference surface DIN 876/0 2x M8 threaded mounting holes Dark granite for thermal stability 300 × 200 × 50 mm working area Stable reference surface for reliable measurements This plate delivers a flat, wear‑resistant reference that supports repeatable dimensional checks and assembly inspections. The surface class DIN 876/0 indicates a high flatness standard suitable for most workshop and inspection tasks; it reduces measurement scatter and the need for repeated checks, improving throughput in quality control. Made from dark granite, the slab offers low thermal expansion and good vibration damping, which keeps readings consistent during routine use. Built for integration with stands and fixtures Two M8 threaded holes are provided for secure attachment of measuring posts, clamps or small fixtures, enabling quick integration into existing test benches. The threaded mounting option simplifies alignment of gauges and probes, making this reference surface a practical base for height gauges, dial indicators and small coordinate measuring setups. The combination of a rigid support and fixed mounting points reduces set‑up time and improves positional stability during inspection. Workshop practicality: size, weight and durability At 300 × 200 × 50 mm and approximately 9.4 kg, this plate balances portability and stiffness: compact enough for bench use yet heavy enough to resist easy displacement during handling. The material choice grants excellent surface hardness and wear resistance, so routine cleaning with a soft cloth and light solvent keeps the plate ready for measurements. Its dimensions make it a versatile messtisch solution for small to medium components where a dependable reference area is required. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine granite plate into measurement workflows and arranging prompt delivery from Emmerich. Technical Data Article number: M206.112 Dimensions: 300 x 200 x 50 mm Material: dark granite Mounting thread: 2x M8 Standard: DIN 876/0 Weight: 9.4 kg GTIN: 4054469103143 Tariff number: 68022300 Facts Surface flatness class: DIN 876/0 Working area: 300 × 200 mm Thickness: 50 mm Weight in kg: 9.4 Special features Two M8 threaded holes for attachments Dark granite with high thermal stability Suitable as a reference surface for inspection Category: Messtisch / measuring table Manufacturer SKU: M206.112 FAQ What flatness standard does the plate meet? The plate complies with DIN 876/0, providing a high flatness class suitable for routine inspection and workshop metrology with the Metav IndustryLine granite plate (M206.112). Can measuring stands be mounted directly to the plate? Yes, the two M8 threaded holes permit direct attachment of measuring posts and small fixtures, allowing stable integration of height gauges and dial indicators. Is the surface suitable for optical and tactile probes? The dark granite surface is appropriate for both tactile probes and many optical checks because of its low reflectivity and long‑term dimensional stability. How should the plate be cleaned and maintained? Clean with a soft, lint‑free cloth and mild solvent if required; avoid abrasive tools. Regular light maintenance preserves the wear resistance and flatness of the reference surface. Is the plate appropriate for portable bench use? With its 300 × 200 × 50 mm format and weight of about 9.4 kg, the plate is designed for bench use where a compact yet stable reference surface is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x200x50 mm Granite Surface Plate With 6x M8 Top And 4x M10 Bottom, DIN 876/0 - Metav IndustryLine
Take advantage of a stable, DIN-classed reference surface combined with versatile threaded mounting for reliable measurement and fixturing; order the plate directly via Metav Werkzeuge or consult our advisers for integration into existing inspection setups. Granitplatte, 300x200x50 mm — Granite surface plate (DIN 876/0) with threaded mounts by Metav IndustryLine Granitplatte, 300x200x50 mm is a compact, high-accuracy granite surface plate designed as a stable reference for inspection, assembly and fixture alignment in workshops and small inspection bays. DIN 876/0 accuracy class Dark granite for thermal stability 300 x 200 x 50 mm working surface Threaded mounts: 6x M8 & 4x M10 Consistent reference surface for repeatable measurements A calibrated granite surface provides a durable and stable base for everyday metrology tasks. The 300 x 200 x 50 mm working area balances reach and stiffness, making the plate suitable for bench-top inspection and small-assembly jigs. The dark granite raw material reduces thermal distortion compared with many metallic alternatives, which helps maintain reproducible results across typical workshop temperature fluctuations. With a nominal mass of 10 kg, the plate sits securely on a bench, resisting unwanted movement during tactile probing or comparative gauging. The DIN 876/0 classification signals a high flatness standard, so components and gauges rest on a predictable, low-wear surface that supports efficient process control. Integrated mounting for modular workflows Threaded connections simplify fixture layout and the attachment of stands or locating elements: this plate features 6x M8 and 4x M10 thread options, allowing direct mounting of inspection stands or bespoke clamps without additional adapters. The built-in thread pattern supports repeatable set-ups, reducing set-up time and minimising stack-up errors when swapping parts or fixtures. For production environments where throughput and reproducibility are priorities, the threaded configuration facilitates fast transfer between measuring tasks and downstream operations, improving workflow efficiency and reducing machine downtime. Practical quality and workshop integration The compact format and robust composition make this plate a practical choice for inspection benches, test rigs and assembly fixtures where space and accuracy matter. The granular surface resists routine wear and provides a reliable datum for comparative checks, layout work and small-part inspection. Supplied under the Metav IndustryLine range, the plate benefits from Metav’s positioning as a precision partner for trades and industry — an offer supported by local European stock and a service rationale that combines product availability with application advice. Where a stable, DIN-classed reference is required, this surface plate gives measurable gains in repeatability and confidence during everyday inspection tasks. For application advice or to secure the Metav IndustryLine granite surface plate for integration into an inspection bench, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com — our advisers can recommend mounting options and delivery details Technical Data Article number: M206.116 GTIN: 4054469183510 Manufacturer: Metav IndustryLine Material: dark granite Norm: DIN 876/0 Core data Dimensions: 300 x 200 x 50 mm Weight: 10 kg Threading: 6x M8 (top) and 4x M10 (bottom) SKU: M206.116 Special features High-accuracy surface plate (DIN 876/0) Threaded mounting for stands and fixtures Compact, bench-top format for workshop use FAQ What level of flatness does this plate offer? The plate is specified to DIN 876/0, indicating a high flatness class suitable for precise reference tasks in inspection and assembly. Can the plate be mounted to inspection stands or fixturing systems? Yes — the plate includes 6x M8 and 4x M10 threaded interfaces designed to accept inspection stands, clamps and custom fixture elements. Is the plate suitable for portable use or stationary benches? With dimensions 300 x 200 x 50 mm and a mass of 10 kg, the plate is optimised for stationary bench-top use while remaining portable enough for controlled repositioning when required. What material is the surface made from and why is that important? The plate is made from dark granite, chosen for thermal stability and wear resistance, which helps preserve flatness and repeatability in routine workshop conditions. Does the Metav IndustryLine plate include certification or calibration details? Product documentation is available from Metav IndustryLine; for specific calibration certificates or traceability requirements, please consult the product adviser. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Runout Tester For Shafts, 0.005mm Accuracy, 100mm Max Workpiece Length, Grooved Roller - Metav IndustryLine
Benefit from 0.005 mm runout resolution, a compact 1–35 mm measuring range and simultaneous dual-point inspection that speeds up series checks. Secure consistent radial and face runout control with a grooved support roller and fine handwheel adjustment. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Runout testing device M208.213 — precise runout control, 1–35 mm range The Runout testing device M208.213 is a bench instrument for verifying radial and axial runout on shafts and small cylindrical components, optimised for repeatable shop‑floor inspection. 0.005 mm measurement resolution Measuring range 1–35 mm Simultaneous dual-point measurement Suitable for series measurements Precise measurement where it matters The instrument delivers an exacting 0.005 mm accuracy, making it suitable for quality checks where tight concentricity and face runout are critical. The fine resolution supports detection of minute deviations that can cause vibration, premature bearing wear or assembly misfit. As a result, production tolerances are easier to maintain and rework rates can be reduced, which contributes directly to consistent throughput and predictable part quality. The device is presented as a metrology tool for repeat inspections rather than a one-off check. Compact range with practical benefits With a 1–35 mm measuring range and a maximum workpiece length capacity of 100 mm, the tester covers small to medium shafts commonly encountered in precision assemblies. The roller with grooves secures cylindrical parts and prevents slippage while the robust construction keeps the measuring geometry stable. The comparatively light weight of 3 kg and bench footprint enable positioning on workshop measuring tables or integration with a stand for repeatable setups, combining reach and rigidity in a compact package. Faster series inspection through dual‑point measurement The design permits simultaneous dual-point readings, which halves the number of repositioning steps for many workpieces and speeds up throughput in serial testing. A manual fine‑adjustment handwheel allows controlled, tactile alignment and minimises operator-induced variability during setup. These features together create a workflow advantage: fewer handling steps, shorter cycle times and more reproducible results for batch inspection without sacrificing accuracy. Designed for workshop reliability Built for routine use, the instrument supports continuous series inspection and is adapted to the demands of a production environment. The construction emphasises repeatability and user ergonomics, reducing the chance of setup errors and enabling technicians to perform consistent runout assessments throughout a shift. Where calibration and traceability are required, regular calibration routines should be scheduled to maintain measurement certainty in line with internal quality plans. Contact Metav Werkzeuge today to discuss how the M208.213 can be integrated into existing inspection processes or to request tailored advice for specific shaft inspections Technical data Article number: M208.213 Label: Rundlaufprüfgerät 1 - 35 mm, 0,005 mm max. Werkstücklänge 100 mm, Rolle mit Nuten Manufacturer: Metav IndustryLine Key figures Measuring range: 1.0–35 mm Maximum workpiece length: 100 mm Accuracy: 0.005 mm Weight: 3 kg Aufnahme: 8 Special features Roller with two grooves (mit 2x Einschnitte) Simultaneous measurement at two positions Hand-operated fine adjustment (handwheel) Suitable for series measurements Compatible with bench mounting / use with stand FAQ What kinds of parts can be inspected with this runout tester? The runout tester is designed for shafts and small cylindrical components; the M208.213 handles parts up to 100 mm in length within the 1–35 mm diameter range. How does the dual‑point measurement help in production? Measuring at two positions at once reduces repositioning and shortens cycle time, which improves throughput during batch or series inspection. Is the instrument portable between workstations? At 3 kg and with a compact bench footprint, the unit is readily moved between measuring tables and can be mounted on appropriate stands for fixed setups. How is slippage prevented during measurement? The roller support features two grooves that stabilise cylindrical parts, ensuring repeatable seating and lower measurement scatter. Can the device be used for both radial and face runout checks? Yes; the tester is configured for radial and axial runout verification on cylindrical workpieces within its geometric limits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision and stability for reliable measurement results
A measurement table provides the essential reference surface for precise dimensional inspection in machine shops, metalworking and quality assurance. Selected and configured correctly, a measurement table ensures consistent flatness, repeatability and a stable basis for comparative measurement tasks.
How the system works and where it’s indispensable
The primary role of a measurement table is to act as a flat, stable datum for handheld gauges and fixed measuring stands. Typical constructions include granite plates, cast-iron plates, and versions prepared for integration with a height gauge or a dedicated stand. In inspection rooms and workshops a well-chosen metrology table reduces measurement scatter by isolating the part from bench vibration and by providing a reliably machined reference plane for both manual and semi-automatic checks.
Tangible benefits that improve daily production
- Increased measurement repeatability by providing a stable reference surface, reducing rework and scrap.
- Faster setup and alignment when used with a height gauge or measuring stand, cutting throughput time for routine checks.
- Robustness and wear resistance from materials such as granite plates or cast-iron plates, extending service intervals.
- Compatibility with common inspection tools, making the inspection table a versatile centrepiece for quality workflows.
Why Metav is the practical choice for workshops and industry
Metav combines industry expertise with wide availability, making precision accessible without compromising quality. From its Emmerich location Metav acts as a quality filter for the European market, supporting over 48,000 customers and offering more than 250,000 products for measurement and workshop equipment. That breadth ensures the right measurement table solution is available alongside complementary metrology accessories, delivered with straightforward order handling and dependable stock management.
Quick summary
A properly specified measurement table — whether a granite plate, a cast-iron plate or a version adapted for a height gauge — is a foundational investment for accurate, efficient inspection. Metav offers the range and expertise to match the right table to the application.
FAQ
Which material is best for my measurement table?
Choice of material depends on use: granite plates are favoured for thermal stability and wear resistance, while cast-iron plates provide cost-effective rigidity. Select a measurement table material that suits your workshop environment and inspection frequency.
Can a measurement table be used with a height gauge?
Yes. Most measurement table designs are compatible with a height gauge or measuring stand; look for tables prepared with mounting or clamping options to secure the gauge and maintain repeatable set-ups.
How should I maintain a measurement table to preserve flatness?
Regular cleaning, avoidance of point impacts and controlled storage conditions help preserve the reference surface. For critical processes, schedule inspection and calibration of the inspection table according to internal quality procedures or industry standards.
What makes Metav a reliable supplier for metrology tables?
Metav combines decades of sector knowledge with a comprehensive product range from Emmerich, offering consistent quality control, broad selection and supply reliability for the workshop or production floor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com