Precision dial indicators for accurate length and runout checks
Dial indicators and related gauges provide precise measurement of small lengths and deviations, serving applications such as concentricity, flatness and comparison checks on lathes and milling machines, and offering both digital and analog options to suit different measuring ranges. These instruments are used with appropriate accessories for tasks like depth measurement or runout testing and feature hardened contact faces or balls for reliable contact; typical variants include dial indicators, test indicators and depth gauges. Analog types transmit spindle movement via rack and pinion to the pointer and may include a drag pointer to prevent gear damage, while digital versions give straightforward numeric readouts for quick interpretation. Using these gauges improves setup accuracy, process control and the repeatability of measurements in metalworking and workshop environments.
10 mm Wire Lever For Dial Indicator 301.031–301.035 - Metav IndustryLine
Take advantage of a compact, purpose-made wire lever that ensures precise probe contact and straightforward compatibility with selected dial indicators; its lightweight design keeps handling simple and repeatability high. Order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. Wire Lever M301.036 — dial indicator accessory for selected indicator models (Metav IndustryLine) The Wire Lever M301.036 is a compact probe accessory for dial indicators, designed to provide fine actuation and reliable contact for small or awkward measurement points. Compatible with models 301.031–301.035 Lightweight construction, approx. 40 g Fine contact for delicate measurement tasks Simple attachment to standard dial indicators Improved repeatability through controlled probe contact The lever converts small probe movements into consistent contact behaviour, reducing variability caused by manual handling. By providing a dedicated contact geometry, the accessory promotes repeatability and lowers the risk of measurement scatter during series checks. The design supports delicate actuation, which is particularly useful when assessing small surfaces or edges where direct tip contact might otherwise deform the part or introduce error. This results in a measurable benefit for quality control routines where consistent readings are essential. Seamless integration with existing indicator setups Compatibility with the listed indicator models ensures quick retrofitting without modification to the measurement chain. The lightweight build keeps additional mass low, limiting influence on the indicator mechanism and preserving sensitivity. For workshops and inspection benches, this means reduced downtime when switching from a standard probe to the wire lever and faster set-up for repetitive inspection tasks. Clear mechanical fitment simplifies inventory management by allowing one accessory to service multiple indicator variants. Practical advantages for inspection and assembly environments The accessory is conceived for everyday metrology use: compact, easy to handle and suitable for confined spaces. Its geometry facilitates access to recesses and stepped features, enabling precise positioning where a standard tip cannot reach. In practical terms, the lever helps operators execute interior and exterior checks with more confidence and less repositioning of the workpiece, which speeds up throughput while maintaining control over measurement quality. Support and documentation for professional use Metav’s position as a precision partner provides an additional layer of assurance: product supply is managed from Emmerich with a focus on dependable delivery and clear product information. Technical queries about fitment or application are handled by specialists who can advise on integrating the lever into existing inspection routines and workflows. This support complements the accessory’s practical benefits by helping purchasers make an informed selection for industrial use. For tailored advice or to secure the M301.036 through Metav Werkzeuge, contact our technical team in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930; specialists will advise on fitment and delivery. Technical data Article number: M301.036 GTIN: 4054469158518 Customs tariff number: 90318020 Category: Messgeräte > Zubehör Manufacturer: Metav IndustryLine Facts Weight: 0.04 kg Image file: m301036-main.jpg SKU: M301.036 eClass: 21170308 ETIM: EC003591 Design & features Wire lever accessory for dial indicators Compatible with dial indicators 301.031–301.035 Accessory category: accessory Suitable for fine contact and confined spaces FAQ What is the primary purpose of this wire lever? The wire lever is an accessory designed to provide fine actuation and controlled contact for dial indicators, improving consistency when measuring small or confined features with the M301.036. Which indicators are compatible with the accessory? Compatibility covers the indicator models 301.031–301.035; the accessory attaches to these indicator types to extend access and improve probe contact. How is the lever mounted to the dial indicator? Mounting is mechanical and intended for direct attachment to the specified indicator housings; please refer to the product fitment notes supplied with the M301.036 or contact Metav Werkzeuge for guidance. Is the lever suitable for inspecting delicate components? Yes, the lever provides fine contact and reduced tip force, making it suitable for delicate parts where minimising surface impact is important. Can the accessory be used in production inspection routines? The accessory is intended to support repetitive inspection tasks by improving reach and contact consistency, thereby aiding throughput and measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 kg Magnetic Base With On/Off Switch, Prism Foot, M8 Thread - Metav IndustryLine
Benefit from a compact magnetic base that pairs a 100 kg nominal holding force with an integrated on/off switch and an M8 mounting thread for fast, repeatable fixturing; order directly via Metav Werkzeuge or speak with our consultants for application advice. Magnetic Base 100 kg/M8 with On/Off Switch (Metav IndustryLine) A robust magnetic base designed to secure indicators and fixtures on ferrous surfaces, offering 100 kg nominal holding force and an M8 mounting thread for versatile workshop use. *100 kg nominal holding force *Integrated on/off switch *M8 mounting thread, compact 73 x 50 x 55 mm Secure holding that improves measuring reliability The magnetic base delivers a 100 kg holding force, providing a stable platform for inspection and measurement tasks where repeatability matters. The strong magnetic performance reduces micro-movement under load, which means gauges and indicators remain steady during probing or machining checks. Built for workshop and inspection benches, the unit’s compact footprint (73 x 50 x 55 mm) allows precise placement in confined set-ups while the moderate weight of 1.15 kg keeps handling straightforward. By relying on consistent clamping strength, setup times are shortened and rework from slippage is reduced, supporting efficient quality-control workflows. Safer, faster operation with integrated control and prism foot An integrated on/off switch simplifies engagement of the magnetic circuit and minimises the need for manual repositioning when changing parts or instruments. The prism-style base ensures secure contact on round or irregular ferrous surfaces, improving stability for shaft or tube-mounted checks. The M8 threaded connection permits direct mounting of support posts and holders without adaptors, reducing component count and set-up complexity. These design choices combine to offer a pragmatic balance of safety and operational speed, enabling technicians to focus on measurement tasks rather than fixturing. Compact design for flexible workshop applications The low-profile construction and standard thread make this magnetic base a flexible addition to any inspection kit or magnetic stand assembly. The unit is useful in metalworking shops, toolrooms and inspection labs where reliable repeatable positioning of dial indicators or test probes is required. Corrosion-resistant materials and a robust magnet assembly ensure long service life under normal workshop conditions. Compatibility with common magnetic stand components and simple mechanical mounting mean the base integrates smoothly into existing jigs and benches, increasing the utility of existing equipment without extensive modification. For secure, repeatable fixturing choose the Metav IndustryLine magnetic base and contact Metav Werkzeuge for tailored advice or to arrange supply direct from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M208.102.1 GTIN: 4054469104522 Dimensions: 73 x 50 x 55 mm Weight: 1.15 kg Thread: M8 Nominal holding force: 100 kg Facts Holding force: 100 kg Weight: 1.15 kg Dimensions (L x W x H): 73 x 50 x 55 mm Thread size: M8 HS Tariff number: 90319000 Special features Integrated on/off switch Prism-style base for round surfaces Compact, low-profile construction Suitable for magnetic stands and indicator mounting FAQ What holding capacity does the magnetic base provide? The magnetic base offers a nominal holding force of 100 kg, providing secure clamping for indicator and fixture applications. Which mounting thread is fitted to the base? The device features an M8 mounting thread for direct attachment of posts and accessory fittings. Is the base suitable for use on cylindrical surfaces? Yes, the prism-style foot is designed to improve contact and stability on round or irregular ferrous surfaces. How heavy is the magnetic base and is it easy to handle? The unit weighs 1.15 kg, combining a compact form factor with convenient portability for workshop use. Can this base be mounted on existing magnetic stands? The standard M8 thread and compact dimensions allow integration with common magnetic stand components and indicator holders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 mm Depth Gauge Bridge for Dial Indicator 102 x 17 mm, Ø8 mm Spindle - Metav IndustryLine
Take advantage of precise, repeatable depth measurement combined with robust workshop durability and standard dial‑gauge compatibility; order the item directly via Metav Werkzeuge or ask the consultants for application advice. Depth measuring bridge for dial gauge, 100 mm – Ø 8 mm mounting (Metav IndustryLine) A depth measuring bridge for dial gauge designed to provide stable, repeatable depth checks and accessory support for workshop and inspection tasks. 100 mm depth range, 102 x 17 mm base Mounting post Ø 8 mm for standard dial gauges Matt chrome-plated with ground and lapped measuring faces Reliable depth measurement for repeatable results The design of this depth bridge concentrates on stability and repeatability, providing a straight measurement range of 100 mm and a compact base of 102 x 17 mm that reduces flex when probing shallow cavities. The mounting post with Ø 8 mm diameter is compatible with standard dial gauges, which means the bridge can be integrated into existing inspection routines without adapters. Because the measuring faces are ground and lapped, the contact geometry is optimised for consistent results across repeated measurements and routine incoming inspections. Built to resist workshop conditions and support precision tools Constructed with a matt chrome-plated finish and precision-machined contact surfaces, this accessory resists corrosion and everyday wear while maintaining measurement integrity. The overall height of 37 mm and moderate mass (weight 0.43 kg) give a low centre of gravity that improves handling during use and helps the bridge remain steady during readings. The material and finishing choices reduce reflectivity and minimise the risk of surface contamination affecting readings, supporting longer service life and reduced downtime for maintenance. Practical use cases and compatibility in the workflow This gauge accessory is intended for depth checks on small components, fixture set‑up controls and comparative measurements in bench inspection stations. The bridge fits all dial gauges with an 8 mm mounting stem, simplifying the transition between instruments and allowing the same dial gauge to be used for height, depth and comparative checks. Its compact footprint makes it suitable for crowded inspection benches or mobile test rigs, where space and reproducibility are equally important. Integration into standard quality workflows improves throughput by reducing adjustment time between measurement tasks. For precise depth control and workshop-ready reliability with Metav IndustryLine quality, contact Metav Werkzeuge to arrange supply of the M208.061 depth measuring bridge or to request application guidance Technical data Article number: M208.061 GTIN: 4061905042584 Brand: Metav IndustryLine Material: matt chrome-plated, measuring faces ground and lapped Category: Accessory for measuring instruments Facts Measuring range: 100 mm Base dimensions: 102 x 17 mm Mounting diameter: Ø 8 mm Overall height: 37 mm Weight: 0.43 kg Special features Suitable for all dial gauges with 8 mm mounting Ground and lapped measuring faces for repeatability Matt chrome-plated finish for workshop durability FAQ Can this bridge be used with any dial gauge? The bridge accepts dial gauges with an 8 mm mounting stem; the M208.061 from Metav IndustryLine is therefore compatible with standard stem‑mounted dial gauges. What makes the measuring faces reliable for repeated checks? The measuring faces are ground and lapped, a surface treatment that ensures consistent contact geometry and improves reproducibility for repeated depth measurements. Is the bridge suitable for mobile inspection benches? Yes, the compact base (102 x 17 mm) and moderate weight (0.43 kg) make the accessory well suited to crowded benches and portable rigs where stability and space economy are required. Which materials and finishes are used? The accessory is matt chrome-plated with precision‑finished measuring faces to reduce wear and resist corrosion in workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 mm Extension For Dial Indicators M2.5 Thread, Ø4.5 mm, Stainless Steel - Metav IndustryLine
Benefit from a robust stainless steel construction, a precise M2.5 thread and a 100 mm probe reach that reduces fixture adjustments and simplifies access to recessed features; order the extension directly via Metav Werkzeuge or ask our consultants if needed. Extension for dial indicators — 100 mm reach, stainless steel accessory (Metav IndustryLine) The Extension for dial indicators offers an easy way to extend probe reach for confined or recessed measurements in inspection and workshop environments Stainless steel construction 100 mm extended reach M2.5 thread for standard indicators 4.5 mm probe diameter Accurate reach where space is limited A small accessory can make measurements straightforward: the 100 mm probe length increases working reach without altering the indicator’s measuring behaviour, enabling repeatable readings in otherwise inaccessible positions. The standard M2.5 thread fits most dial and test indicators that use fine spindle connections, so integration into existing gauge setups is immediate and tool-free aside from the simple screw-in fit. This results in fewer fixture changes and a smoother inspection workflow. Robust material for workshop use Manufactured from stainless steel, the extension resists corrosion and preserves surface integrity during repetitive use, which supports long-term dimensional stability of the probe. The slim 4.5 mm shaft diameter suits narrow bores and tight features, making the accessory appropriate for routine quality checks and assembly inspections alike. The compact design reduces the need for elaborate fixturing and helps maintain measurement consistency under normal workshop conditions. Easy integration with inspection equipment Designed as an accessory for dial and test indicators, the extension installs quickly onto an indicator spindle and restores full movement to the contact point while keeping the instrument’s measuring axis aligned. The simple geometry minimises lever effects and ensures reliable contact transmission for basic comparative and spot measurements. Supplied as a straightforward probe extension, the component is ideal for retrofitting existing gauges to expand capability without changing the provenance of the measuring instrument. For reliable probe extensions and practical advice on integration, contact Metav Werkzeuge to order the Metav IndustryLine extension with M2.5 thread and 100 mm reach or to discuss matching accessories for specific inspection tasks Technical data SKU: M208.063.0 GTIN: 4054469104157 Tariff number: 90179000 Manufacturer: Metav IndustryLine Facts Length: 100 mm Probe diameter: 4.5 mm Connection thread: M2.5 Material: stainless steel Special features Accessory for dial indicators and test indicators Suitable for recessed and confined measurements Compact, slim probe for narrow bores Category: measuring devices — accessory FAQ Is this extension compatible with standard dial indicators? This extension is compatible with dial and test indicators that accept an M2.5 spindle connection and is supplied as the Metav IndustryLine accessory (SKU M208.063.0). What material is the probe made from and why does that matter? The probe is made from stainless steel, which provides corrosion resistance and dimensional stability during repeated workshop use. Can the extension be used for measurements inside narrow bores? Yes, the 4.5 mm probe diameter is suitable for narrower bores and recessed features where a standard indicator spindle cannot reach. Does the extension affect measurement accuracy? When correctly mounted on a compatible indicator, the extension preserves the contact axis and supports repeatable readings; however, measuring strategy should account for any lever effects on long probes. What applications suit this accessory? Typical uses include spot checks, assembly inspections and measurement of recessed or difficult-to-access areas where an additional 100 mm reach simplifies the process. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 mm Extension Rod Ø16 mm M8 Thread Magnet Stand Accessory - Metav IndustryLine
Take advantage of a compact, standards‑compatible accessory that increases reach while keeping setups stable: the 100 mm length and Ø16 mm shank with an M8 threaded connection deliver precise, repeatable positioning for magnetic holders and dial indicators. Order directly via Metav Werkzeuge or consult our technical advisors for compatibility details. Extension for Magnetic Stand M208.104.V1 — 100 mm length, Ø16 mm shank, M8 thread (Metav IndustryLine) The Extension for Magnetic Stand, 100 mm is a purpose‑built spacer that extends the reach of magnetic bases and measuring stands, enabling secure mounting of indicators and probes in confined or elevated positions. 100 mm extension length 16 mm diameter shaft M8 threaded connection Greater reach with controlled stability The compact rod provides an additional 100 mm of reach while maintaining a slim Ø16 mm profile that minimises obstruction in dense setups. By adding this spacer between a magnetic base and an indicator, a fixed inspection point can be reached without repeated reclamping, which reduces setup time and the risk of cumulative alignment errors. The result is a more efficient measuring routine and improved reproducibility for routine checks and workshop tasks. Straightforward, standardised compatibility Threaded to metric M8 standards, the extension fits any magnetic stand or holder with an M8 female thread, simplifying integration into existing metrology kits. The metric thread is a common workshop standard, so the component mounts directly and reliably; the part weighs 0.15 kg which keeps the added mass low and avoids undue loading of the magnetic base. This makes the accessory particularly useful for measuring setups where a balance of reach and rigidity is required. Practical benefits for everyday measuring workflows As a small, purpose‑designed accessory, the rod reduces the need for improvised fixtures and speeds up repetitive tasks: operators gain a consistent reference point and maintenance of alignment becomes easier. The simple mechanical concept translates into tangible time savings and fewer measurement interruptions. Backed by the Metav approach to accessible precision, this accessory supports dependable workmanship in both production and inspection environments. For product enquiries or to specify the Metav IndustryLine 100 mm extension with M8 thread for a particular measuring stand, contact Metav Werkzeuge for tailored advice and reliable supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M208.104.V1 GTIN: 4054469159430 ECLASS: 21170613 ETIM: EC002219 Category: Measuring instruments / Accessories Core dimensions & weights Length: 100 mm Shank diameter: Ø16 mm Thread: M8 Weight: 0.15 kg Tariff number: 90319000 Compatibility & features Suitable for all stands with M8 thread Intended use: extension for magnetic bases and measuring stands Label: Extension for Magnetic Stand, 100 mm length, D = 16 mm, thread M8 FAQ What is the primary purpose of this extension? The Extension for Magnetic Stand, 100 mm increases the reach of a magnetic base or holder to position dial indicators or probes at otherwise inaccessible points, improving setup flexibility and repeatability. Which magnetic stands will accept this extension? Any magnetic stand or holder with an M8 female thread will accept the extension; the M8 thread is a standard metric connection used across common measurement stands. What are the exact dimensions and mass of the part? The component measures 100 mm in length, has a Ø16 mm shank, an M8 thread and weighs 0.15 kg, making it a compact, lightweight spacer for metrology setups. Can the extension be used with dial indicators and electronic probes? Yes, the extension is suitable for mounting dial indicators and probes on magnetic bases, provided the instrument or its holder interfaces with an M8 threaded socket. Is the thread metric and ready for direct mounting? The thread is a standard metric M8, so the part can be mounted directly into compatible female M8 threads without adapters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-250mm Internal Precision Bore Gauge 0.01mm Resolution Repeatability 0.005mm, Supplied in Case - Metav IndustryLine
Combining a broad 100–250 mm measuring range with a fine 0.01 mm resolution and 0.005 mm repeatability, this analogue internal measuring gauge gives reproducible diameter control for in-process inspection. Supplied with a protective transport case and a matt chrome-plated holder, it is ready for workshop use – order via Metav Werkzeuge or consult our specialists for application advice. M208.027 Internal Fine Measuring Gauge — analogue internal gauge, 100–250 mm range, 0.01 mm resolution (Metav IndustryLine) The M208.027 Internal Fine Measuring Gauge is an analogue internal measuring instrument designed for precise diameter checks in production and quality‑control environments, especially where workshop robustness and repeatable results are required. Analogue dial with 0.01 mm resolution Repeatability 0.005 mm Measuring range 100–250 mm Supplied in a protective transport case Reliable precision for routine bore measurement The instrument delivers consistent results across a useful industrial span of 100–250 mm, making it suitable for batch inspection and setup checks. The 0.01 mm dial graduation provides clear, comparably fine readings for standard workshop quality control, while the documented repeatability of 0.005 mm reduces uncertainty when checking bore tolerances. Because the mechanism is analogue, readings are immediate and maintenance is straightforward, which helps to keep throughput steady and inspection cycles short. Built for workshop handling and longevity A matt chrome‑plated holder improves resistance to everyday knocks and handling, and the total instrument mass of 1.7 kg gives a reassuring feel without being cumbersome. The unit’s 220 mm measuring depth allows access to deeper bores than many compact gauges, so larger housings and assemblies can be inspected without improvised setups. Delivered in a protective case for transport, the gauge arrives ready for safe storage and practical on‑site use, reducing downtime between jobs. Practical probe system and adaptability The gauge uses threaded probes (M8 × 7.2) and is supplied with probe segments that cover the required subranges across the measuring band, enabling quick changeover between inspection sizes. A 75 mm extension option increases flexibility for atypical depths, while the probe design preserves contact geometry for stable measurements. These mechanical choices prioritise repeatability and reduce operator influence on results, which is crucial where consistent pass/fail decisions are needed. Why this gauge works for production inspection As an analogue internal bore solution it combines clear visual feedback with a robust mechanical design, supporting frequent checks without complex electronics. The compact probe set and straightforward calibration make it appropriate for machine shops, toolrooms and incoming inspection stations that require accurate diameter control but prefer a low‑complexity instrument. The gauge’s balance of range, depth and repeatability is aimed at practical everyday metrology rather than laboratory‑only tasks. Contact Metav Werkzeuge for a tailored quotation or technical consultation on the M208.027 internal fine measuring gauge and to confirm accessory and probe requirements for the intended inspection use. Technical data Article number: M208.027 GTIN: 4061905042690 Manufacturer: Metav IndustryLine Facts Weight: 1.7 kg Measuring range: 100–250 mm Resolution: 0.01 mm Repeatability: 0.005 mm Measuring depth: 220 mm Extension length: 75 mm Probe thread: M8 × 7.2 Special features Analogue dial indicator Probe segments for subranges within 100–180 mm Matt chrome‑plated device holder Supplied in protective transport case Suitable for routine workshop and production inspection FAQ What accuracy and repeatability can be expected with this gauge? The M208.027 internal fine measuring gauge provides a resolution of 0.01 mm and a repeatability of 0.005 mm, making it suitable for routine workshop QC where reproducible tolerance checks are required. Is the instrument suitable for deeper bores or larger assemblies? Yes. With a 220 mm measuring depth and an available 75 mm extension, the gauge is intended to reach deeper internal features and can inspect larger housings without makeshift setups. How are different diameter ranges covered by the probe system? The gauge is supplied with probe segments that cover the principal subranges within the 100–250 mm band; threaded probes (M8 × 7.2) allow quick changeover between segments to match the inspected diameter. Does the instrument include a transport or storage solution? The unit is supplied in a protective transport case designed to keep the instrument and probe set secure during transit and storage. Is this gauge intended for production use or laboratory metrology? The design balances robustness and repeatability for production and workshop inspection tasks; it is optimised for frequent in‑process checks rather than ultra‑high‑precision laboratory measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100kg M10 Magnetic Base With On/Off Switch And V-Base - Metav IndustryLine
Benefit from the 100 kg nominal holding force combined with an M10 threaded interface and an integrated on/off magnetic switch for fast, safe repositioning of measurement equipment; order the magnet base directly via Metav Werkzeuge or consult the team for application advice. Magnet Base 100 kg M10 with On/Off Switch – Magnetic mounting base for measurement stands (Metav IndustryLine) The Magnet Base 100 kg M10 with On/Off Switch is a compact magnetic holder designed for secure attachment of dial indicators and measurement fixtures to ferrous surfaces, enabling repeatable set-up in inspection and workshop environments. 100 kg nominal holding force M10 threaded mounting interface Integrated on/off magnetic switch Prism foot for reliable contact Secure holding power for consistent measurement results The magnetic holder provides a nominal holding force of 100 kg, which translates into markedly improved stability when fixing measurement posts or small fixtures to machine beds and steel plates. The high holding force reduces the risk of slippage during fine adjustments, supporting repeatable setups and minimising the need for frequent re-alignment. The integrated on/off mechanism simplifies safe engagement and disengagement of the magnetic circuit, allowing rapid repositioning without tools and reducing setup time in production or quality‑control routines. Versatile mounting and precise contact geometry An M10 threaded interface offers compatibility with common indicator stems and articulating arms found in many workshop stands, while the prism foot ensures secure contact on cylindrical or curved components by improving contact area and grip. The thread standard and prism geometry make this base suitable as a modular mounting component in existing measurement rigs, so that indicator alignment is both mechanically stable and straightforward to adjust. The design concentrates on functional fit rather than decorative elements, prioritising utility for machinists and inspection technicians. Compact build for efficient workshop handling With a compact footprint and a body weight of 1.4 kg, the magnetic base balances portability with the stiffness required for reliable measurement. The modest mass supports easy handling by a single operator while still delivering robust magnetic performance on ferrous substrates. The base is intended for workshop and inspection use where quick, repeatable mounting of gauges and fixtures increases throughput; its compact dimensions suit bench and on‑machine applications without excessive encumbrance. Contact Metav Werkzeuge for tailored advice on integrating the Magnet Base M208.103.1 into workshop measurement systems or to request further technical details from our Emmerich quality centre. Technical data Article number: M208.103.1 GTIN: 4054469104546 eCl@ss: 21170601 Category: Magnetstative Facts Nominal holding force: 100 kg Thread: M10 Weight: 1.4 kg Dimensions: 73 x 50 x 55 mm Tariff number: 90319000 Special features Integrated on/off magnetic switch Prism foot for cylindrical contact Intended for use with magnetic stands and indicator posts Compact workshop design FAQ What holding capacity does the magnetic base offer? The Magnet Base 100 kg M10 with On/Off Switch provides a nominal holding force of 100 kg, specified for firm attachment to ferrous surfaces. Which mounting thread is provided for attaching indicator stems? The magnetic holder uses an M10 threaded interface, compatible with standard indicator stems and many articulating arms. Is the prism foot suitable for curved workpieces? Yes, the prism foot improves contact on cylindrical or curved components and enhances stability during measurements. What are the dimensions and weight of the unit? The magnetic base measures 73 x 50 x 55 mm and weighs 1.4 kg, making it compact yet substantial enough for stable positioning. Can this product be used on machine beds and inspection fixtures? The base is designed for workshop and inspection environments and is suitable for securing measurement posts and fixtures to machine beds and steel plates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Capacitive Linear Probe Digital 0.005mm Resolution Cable Included - Microtech Metrology
Take advantage of the combination of high-resolution measurement and secure Ø8 h6 mounting for consistent inspection cycles; the digital probe delivers repeatable readings with a 0.0001 mm display resolution and an accuracy of ±0.005 mm. Order the instrument directly via Metav Werkzeuge or consult the Metav advisers for application-specific recommendations. Probe — Digital test probe, 0–100 mm range, ±0.005 mm accuracy (Microtech Metrology) The Probe is a compact electronic measurement probe intended for precision length and displacement checks in workshop inspection and quality-control environments. Digital probe with 0.0001 mm resolution 0–100 mm measurement range Accuracy ±0.005 mm for precise checks Ø8 h6 shank for secure mounting Precision where sub-millimetre detail matters The electronic measuring element offers a resolution of 0.0001 mm and an indicated accuracy of ±0.005 mm, enabling fine discrimination during dimensional checks. Such specifications reduce uncertainty in pass/fail decisions and help to cut rework: with a clear digital readout and stable measurement characteristics, routine inspections become both faster and more reliable. The design suits bench inspection and production sampling where traceable, repeatable readings underpin quality documentation. Mechanical reliability and consistent contact behaviour A machined Ø8 h6 shank provides a firm, concentric mounting interface for fixtures or holders, while the defined measuring force of 3.2–5.2 N stabilises contact conditions and improves reproducibility across cycles. The probe is equipped with a 2 m cable for straightforward connection to data acquisition systems or indicator interfaces, and the robust mechanical interface minimises play and vibration during measurement. These technical choices translate into fewer measurement variations and a more dependable inspection routine. Workflow integration and benefits for quality control Designed as an electronic measuring aid within the dial‑indicator and comparator class, the unit supports standardised inspection procedures and can shorten cycle times through rapid, unambiguous readings. When used in combination with appropriate fixtures and data capture, the device contributes to measurable efficiency gains and tighter process control. For teams streamlining quality assurance, the probe is a practical component for consistent dimensional monitoring and documentation. For tailored advice on integrating this Microtech Metrology probe into existing inspection routines, contact Metav Werkzeuge in Emmerich for expert guidance and reliable delivery. Technical data Article number: 120129907P GTIN: 4061905458217 Manufacturer: Microtech Metrology Facts Measurement range: 0–100 mm Resolution: 0.0001 mm Accuracy: ±0.005 mm Measuring force: 3.2–5.2 N Shank: Ø8 h6 Cable included: 2 m Special features Digital output ECLASS: 21170308 Category: Dial indicators (messuhren) Includes 2 m cable FAQ What measurement range does the probe cover? The probe covers a measurement range of 0–100 mm, suitable for precision checks and workshop inspection tasks. What level of accuracy and resolution can be expected? The Microtech Metrology probe provides a resolution of 0.0001 mm and an accuracy of ±0.005 mm for consistent, high‑precision readings. How is the probe mounted in fixtures? Mounting is via a machined Ø8 h6 shank to ensure concentric, secure attachment in holders and fixtures. Is a connection cable supplied? Yes, the probe is supplied with a 2 m cable for direct connection to compatible interfaces or data acquisition systems. What is the specified measuring force and why does it matter? The probe operates with a measuring force of 3.2–5.2 N; this defined contact force improves repeatability by reducing variability from differing operator pressure. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Dial Gauge Digital Absolute 0.01mm Resolution USB, IP79, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high-resolution measurement, full ISO 17025 calibration and reliable data export for consistent quality control. Order the Microtech digital dial gauge directly via Metav Werkzeuge or ask our consultants if needed. Microtech digital dial gauge – 0–100 mm, USB output The Microtech digital dial gauge is a compact absolute measuring instrument for fine workshop and toolroom tasks, offering traceable digital readout and USB data export for process documentation. *Digital absolute measuring system *0.001 mm resolution, ±0.012 mm accuracy *ISO 17025 calibrated with certificate *USB data output for traceable logging Precise measurement and reliable traceability for quality control The instrument delivers a 0.001 mm reading step combined with an indicated performance of ±0.012 mm accuracy, providing repeatable results for machining and inspection tasks. Built around an absolute measuring system, the device keeps its reference after power loss, eliminating reset errors and reducing setup time. The compact electronic measurement head is designed to reduce operator influence and supports consistent measurement routines in serial inspection or tool setting. Compact format tailored to micromechanical tasks With a measuring range of 0–100 mm, this model falls into the micro category for extremely compact calipers and gauges, making it well suited to watchmaking, small-part inspection and precision toolrooms where short jaws and minimal torsion are essential. The specified measuring force of 3–5 N balances secure contact with delicate parts, so finishing and microcomponents can be measured without deformation while maintaining good tactile feedback. Practical data handling and ergonomic operation The instrument’s digital display offers mm/inch selection and dedicated PRESET, HOLD and MODE keys for quick conversions and fixed reference runs. Data transfer via USB supports direct logging into inspection software or spreadsheets, speeding up documentation and reducing transcription errors. Power is supplied by a CR2032 3V battery for long service intervals; the robust electronic design and an IP 79 rating indicate strong protection against dust and high-pressure washdown in demanding shop environments. Delivered calibrated and ready for traceable inspection This gauge is supplied fully ISO 17025 calibrated and includes a calibration certificate, ensuring immediate usability in accredited inspection routines and audit trails. The combination of high resolution, absolute referencing and certified calibration makes the instrument a dependable choice for quality departments and precision workshops that require documented measurement confidence. For measurement solutions with full traceability and practical data export, contact Metav Werkzeuge in Emmerich for application-specific advice and ISO 17025 documentation Technical data Article number: 120125902 GTIN: 4061905082016 Manufacturer: Microtech Metrology Category: Dial gauges Digital display: mm/inch, PRESET, HOLD, MODE Numbers / Core data Measuring range: 0–100 mm Resolution: 0.001 mm Indicated accuracy: ±0.012 mm Measuring force: 3–5 N Protection rating: IP 79 Power supply: CR2032 3V Data output: USB Special features Absolute measuring system ISO 17025 calibrated; calibration certificate included PRESET, HOLD and MODE functionality Compact format for micro measurements Ready for workshop documentation and data logging FAQ Is the gauge supplied calibrated? Yes. The Microtech digital dial gauge is delivered fully calibrated to ISO 17025 and shipped with a calibration certificate. Can the instrument export measurement data directly? The gauge provides USB data output for direct logging into inspection software or spreadsheets to support traceable documentation. What measuring range and resolution does this model offer? This model covers 0–100 mm with a resolution of 0.001 mm, making it suitable for micro-range precision tasks. Is the instrument suitable for wet or dusty workshop environments? The device is specified with an IP 79 rating, indicating elevated protection against dust and high-pressure cleaning processes. Which battery type powers the display electronics? A CR2032 3V battery powers the display electronics, providing long service intervals for routine inspection use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Dial Gauge Digital Colour Touchscreen, Wireless USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high repeatability (±0.005 mm), integrated wireless and USB data transfer, and an included ISO 17025 calibration certificate to speed up quality control and reduce rework. Order the digital dial gauge directly via Metav Werkzeuge or consult the Metav team for integration advice. Digital dial gauge – colour 2.4" touchscreen, Wireless+USB (Microtech Metrology) Digital dial gauge for workshop and laboratory measurement tasks, offering a compact 0–100 mm range with high-resolution readout and industry-grade connectivity. High accuracy ±0.005 mm 2.4" colour touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Precision that shortens inspection loops The instrument is built for repeatable results: with an accuracy of ±0.005 mm and a measurement range of 0–100 mm, it fulfils demanding inspection routines while remaining compact enough for bench or fixture use. Classified in the micro category for short-range metrology, this gauge suits fine mechanical assemblies, small components and precise set-ups where stiffness and minimal probe travel errors matter. The delivered ISO 17025 calibration certificate ensures traceability and removes uncertainty about measurement validity, allowing confident acceptance of recorded values in internal quality documentation and audit trails. Fast data capture for modern quality workflows Equipped with a 2.4" colour touchscreen and multiple interfaces (Wireless+USB), the device bridges manual measurement and digital records without time-consuming retyping. The integrated electronics and touch display simplify on-site settings and visual checks, while wireless streaming or USB export enables direct transfer into inspection software or SPC systems. A consistent measuring force of 1.3–2.0 N helps reduce operator variation during contacts, improving process capability and reducing the need for repeated measurements—practical advantages that translate into faster throughput and fewer bottlenecks on the production floor. Robust design and compliance for daily use Protection to IP54 limits ingress from dust and splashing liquids, making the instrument suitable for workshop conditions without sacrificing sensitivity. The compact electronics and enclosure are optimised for continuous use, providing stable performance across shifts. The unit’s microcontroller-driven measurement system supports precise averaging and stable output, while the 0.5 mm reversal span contributes to reliable reversal detection in cyclic checks. Supplied calibrated to ISO 17025, the package includes a traceable calibration certificate that simplifies quality documentation and acceptance into regulated production environments. Contact Metav Werkzeuge today to discuss delivery times, calibration scope or system integration and request the full specification and calibration documentation by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 120139907 GTIN: 4061905043314 Manufacturer: Microtech Metrology Facts Measurement range: 0–100 mm Accuracy: ±0.005 mm Measuring force: 1.3–2.0 N Reversal span: 0.5 mm Protection class: IP 54 Special features Colour 2.4" touchscreen display Data output: Wireless + USB Digital instrument with microcontroller Delivered with ISO 17025 calibration certificate Compact design for micro-range inspection FAQ How precise is the measurement with this gauge? The gauge achieves an accuracy of ±0.005 mm and is therefore suitable for high-precision inspection tasks; the Microtech Metrology digital indicator is supplied with an ISO 17025 calibration certificate to document traceability. Can measurement data be exported to inspection software? Yes, the device supports data transfer via Wireless+USB, allowing direct integration of recorded values into SPC or inspection systems. Is the instrument suitable for workshop use? The unit features IP54 protection and a robust enclosure, making it appropriate for standard workshop environments where dust and occasional splashes occur. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Dial Indicator Colour 2.4" Touchscreen Wireless USB, Microcomputer, Modbus PLC Ready - Microtech Metrology
Take advantage of the combination of ±0.005 mm accuracy, a 0–100 mm measuring range and seamless Wireless + USB data transfer for faster inspection cycles and reliable traceability — order directly via Metav Werkzeuge or consult our specialists for integration advice. Digital dial gauge — 2.4" colour touchscreen, Wireless + USB (Microtech Metrology) The digital dial gauge is a compact electronic indicator designed for precision inspection and process data capture in production, quality control and calibration benches. Colour 2.4" touchscreen display Wireless and USB data output High precision: ±0.005 mm accuracy Measuring range 0–100 mm Precision that keeps production moving A reliable measurement device cuts rework and shortens inspection times. The digital indicator delivers an accuracy of ±0.005 mm combined with a display resolution of 0.0001 mm, enabling fine discrimination of dimensional variations that matter in serial production. This level of performance supports consistent acceptance criteria and reduces uncertainty in pass/fail decisions, so process control becomes both faster and more predictable. The compact format suits bench-mounted gauges and inline inspection stations where repeatable results are required. Fast data flow for traceable quality records Efficient capture and routing of measurement data reduces transcription errors and accelerates reporting. With Wireless and USB connectivity and a user-friendly 2.4" colour touchscreen, the instrument permits immediate transfer to SPC systems or PLCs and visual confirmation at the point of measurement. The device’s digital architecture supports straightforward logging of readings, improving traceability in audits and enabling quicker feedback to production. The touchscreen simplifies setup and unit selection, cutting operator time per measurement. Robust contact mechanics for steady results Consistent probe contact is essential for repeatable readings. The indicator’s measuring force of 1.2–2.2 N helps maintain stable contact without excessive deflection, making it suitable for delicate gauge work as well as routine inspection of machined parts. The electronic design minimises mechanical wear compared with analogue heads, so service intervals are extended and downtime reduced. Built with industrial use in mind, this indicator is appropriate for workshop benches, toolrooms and production lines that require dependable dimensional control. For measurement solutions tailored to production needs, contact Metav Werkzeuge to discuss application requirements, request technical documentation or arrange a customised supply plan — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 120139907M GTIN: 4061905453472 eClass: 21170308 Core specifications Measuring range: 0–100 mm Resolution (display): 0.0001 mm Accuracy: 0.005 mm Measuring force: 1.2–2.2 N Display: Colour 2.4" touchscreen Features Data output: Wireless + USB Digital indicator Category: Messuhren FAQ What measurement accuracy does the device deliver? The digital dial gauge achieves an accuracy of ±0.005 mm, suitable for precision inspection tasks where tight tolerances are required. How can measurement data be exported from the gauge? Data can be exported via Wireless and USB connections, allowing the digital dial gauge by Microtech Metrology (SKU 120139907M) to interface with SPC systems and PLCs. What resolution is shown on the display? The indicator provides a display resolution of 0.0001 mm, enabling fine-grained readings for detailed dimensional analysis. Which measuring range is covered by this indicator? The instrument covers a measuring range of 0–100 mm, making it appropriate for small to medium-sized components on the workshop bench. Is the contact force suitable for sensitive components? Yes. The measuring force is specified at 1.2–2.2 N, which balances secure contact with minimal influence on delicate parts when using the digital dial gauge. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Dial Indicator Digital Absolute 0.01mm Resolution USB, IP78, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high-resolution measurement, USB data output and ISO 17025 traceable calibration for consistent inspection results; order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Microtech Metrology Digital Dial Gauge – 0–100 mm, USB data output The Microtech Metrology Digital Dial Gauge is a compact electronic indicator designed for routine dimensional checks and process control in workshops and quality departments. Measuring range 0–100 mm Resolution 0.01 mm, accuracy ±0.02 mm USB data output for direct transfer Delivered calibrated to ISO 17025 Traceable precision for reproducible results The instrument delivers high reproducibility through a 0.01 mm display resolution and a stated accuracy of ±0.02 mm, making it suitable for standardised quality checks and workshop inspections. Its absolute measuring system preserves reference positions after power cycles, so readings remain consistent without the need for repeated zeroing. The device is supplied calibrated to ISO 17025 and includes a corresponding calibration certificate, ensuring measurement traceability for audits and supplier control. Seamless data capture to speed up inspection routines Equipped with a USB data output and a digital interface that toggles between mm/inch and offers PRESET, HOLD and MODE functions, the gauge simplifies documentation and statistical process control. The low-energy CR2032 3V battery provides reliable operation for inspection benches, while the defined measuring force of 3–5 N reduces variability caused by inconsistent contact pressure. These features minimise manual transcription and support faster, more reliable data flows in production environments. Built to reduce measurement uncertainty on the shop floor With a 0–100 mm measuring range, this indicator covers the majority of everyday inspection tasks encountered in machining and fabrication. The robust casing with IP 78 protection guards electronics against dust and splashes found in workshop environments, while the compact design and clear display reduce operator fatigue and error. The combination of controlled measuring force and a stable mechanical platform lowers the influence of handling on the result, improving first-pass acceptance rates. Practical advantage through a trusted supply chain As a product from a specialist metrology manufacturer, this digital instrument supports standard inspection, incoming goods checks and in-process verification. Purchasing via Metav Werkzeuge links the tool to a European quality filter and logistic hub, ensuring dependable supply and conformity to documentation requirements. For teams aiming to tighten tolerances or streamline reporting, the digital dial gauge is a pragmatic step towards more reliable, auditable measurement practice. Contact Metav Werkzeuge in Emmerich for delivery details or technical advice on integrating the instrument into existing inspection routines Technical data Article number: 120125901 GTIN: 4061905082009 Manufacturer: Microtech Metrology Category: Dial gauges (Messuhren) Facts Measuring range: 0–100 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.02 mm Measuring force: 3–5 N Power supply: CR2032 3V Data output: USB IP rating: IP 78 Measuring system: Absolute Special features Digital display with mm/inch, PRESET, HOLD, MODE Delivered calibrated to ISO 17025 with certificate Compact format for bench and fixture use Suitable for workshop and quality-control environments FAQ What accuracy can be expected from this digital dial gauge? The digital dial gauge provides an accuracy of ±0.02 mm with a resolution of 0.01 mm, suitable for standard metrology tasks and routine quality checks. Is a calibration certificate included with delivery? Yes, the instrument is delivered fully calibrated to ISO 17025 and comes with the corresponding calibration certificate. How is measurement data exported from the device? Measurement values can be transferred directly via the USB data output for logging or integration with inspection software. What battery does the indicator use and how is power managed? The unit uses a CR2032 3V battery; power-saving modes and the absolute system help maintain readings and extend battery life. Which measuring tasks is the 0–100 mm range best suited to? The 0–100 mm range covers common component inspections, incoming goods checks and fixture-level measurements in machining and fabrication. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Dial Indicator Digital Absolute, 0.001mm Resolution, USB, IP80, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high-resolution measurement, robust data transfer and accredited calibration for reliable inspection results; combine 0–100 mm range with USB output and ISO 17025 calibration for traceable workflows. Order directly via Metav Werkzeuge or consult the Metav specialists for integration advice. Microtech Metrology Digital Dial Gauge — Absolute system, USB output The digital dial gauge provides high-resolution, absolute measurements for workshop inspection and quality control across general engineering and precision workshop settings High resolution: 0.001 mm display Absolute measuring system for repeatability USB data output for traceable logs Supplied with ISO 17025 calibration Precise measurements that support reproducible decisions This instrument delivers a resolution of 0.001 mm and an accuracy of ±0.008 mm, making it suitable for detailed inspection tasks where reproducibility matters. The 0–100 mm measuring range covers typical component checks in production and maintenance, while the absolute measuring system ensures the zero reference remains stable after power cycles — a practical advantage for serial checks and automated data capture. The combination of tight resolution and a defined accuracy provides a clear, objective basis for pass/fail decisions in the workshop. Practical features for data-controlled inspection Equipped with a digital display offering mm/inch, PRESET, HOLD and MODE functions, this gauge simplifies routine measurements and reduces interpretation errors. The unit transmits readings via USB, enabling direct logging into spreadsheets or quality-control software and supporting traceability demands. Measurement force is specified at 3–5 N, a range that balances contact reliability with low deformation risk on sensitive parts. Power is supplied by a CR2032 3 V battery for compact, maintenance-light operation. The gauge is delivered fully calibrated to ISO 17025, including a calibration certificate for audit and acceptance procedures. Designed for shop-floor robustness and integration With an IP 80 protection rating and an absolute measuring system, the device resists common workshop influences while maintaining measurement integrity. The straightforward user interface and solid data output make the instrument a pragmatic choice for inspection benches, maintenance departments and small-series production where precise records are required. The gauge supports process standardisation: recorded readings can be used to monitor tool wear, verify setup, or feed statistical process control routines, reducing rework and downtime. Choose Microtech Metrology's calibrated digital dial gauge to strengthen inspection reliability—contact Metav Werkzeuge in Emmerich for technical advice, delivery options and integration support Technical data Article number: 120125904 GTIN: 4061905082023 Manufacturer: Microtech Metrology eCl@ss: 21170308 ETIM: EC003591 Numbers / core technical data Measuring range: 0–100 mm Resolution (display): 0.001 mm / 0.00005 in Accuracy: ±0.008 mm Measurement force: 3–5 N Power supply: CR2032 3 V Protection rating: IP 80 Data output: USB Designs / special features Absolute measuring system Digital display with mm/inch, PRESET, HOLD, MODE Supplied calibrated to ISO 17025 with certificate Suitable for workshop and inspection use FAQ Is the device supplied with a calibration certificate? Yes. The instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate for audit and quality assurance purposes. Can measurements be recorded digitally for traceability? The gauge provides a USB data output to transfer readings directly to a computer or data-logging system for traceable records and process monitoring. What is the typical battery and how long does it last? The unit uses a CR2032 3 V battery. Actual battery life depends on usage and backlight time but the type is chosen for compact, low-maintenance operation. Is the gauge suitable for routine shop-floor inspections? Yes. With a 0–100 mm range, robust IP 80 rating and 0.001 mm resolution, the instrument is designed for regular inspection tasks and integration into quality workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Dial Indicator Digital Colour Touchscreen, Wireless/USB, IP54, ISO 17025 - Microtech Metrology
Take advantage of the combination of laboratory-grade calibration, high-resolution measurement and wireless data transfer for reproducible results in precision work; order the device directly via Metav Werkzeuge or contact our consultants for application advice. Messuhr (Digital dial indicator) – Microtech Metrology, ISO 17025 calibrated, Wireless + USB The Messuhr is a compact electronic dial indicator for fine mechanical measurement tasks, offering a 0–100 mm measuring range suited to micro‑precision checks and workshop quality control. ISO 17025 calibration included Wireless and USB data output Colour 2.4" touchscreen display IP54 protection for workshop use High precision where micrometre accuracy matters The indicator delivers laboratory‑grade repeatability with an accuracy of ±0.0035 mm and a resolution of 0.0005 mm, making it suitable for demanding inspection tasks. These figures mean reproducible readings for small tolerances: the accuracy defines the maximum expected deviation from the true value, while the fine resolution shows even the smallest changes on the display. The low measuring force (1.3–2.0 N) helps to reduce deflection and surface indentation during contact, which is particularly important when assessing delicate components or thin materials. Faster data capture and fewer transcription errors Equipped with Wireless and USB data outputs and a colour 2.4" touchscreen display, the instrument simplifies data logging and integration into existing measurement routines. Wireless transfer shortens the path from measurement to digital record, reducing manual entry and the associated risk of errors, while USB provides a reliable wired option for direct downloads. The intuitive touchscreen speeds operation and shortens setup time, so inspection throughput improves without compromising traceability. Built and calibrated for workshop and lab use With an IP54 rating the unit tolerates everyday workshop dust and splashes, while its compact construction targets the Mikro class (0–100 mm) for extremely compact, high‑precision tasks such as watch components, micro‑mechanical parts and quality checks on small assemblies. The device is supplied fully calibrated to ISO 17025 and includes the calibration certificate, ensuring immediate use in accredited procedures or internal quality systems without additional calibration steps. Contact Metav Werkzeuge for a technical consultation and secure the Microtech Metrology Messuhr with ISO 17025 calibration and integrated Wireless + USB data transfer for your inspection bench Technical Data Article number: 120139908 GTIN: 4061905042102 Manufacturer: Microtech Metrology Facts Measuring range: 0–100 mm Resolution: 0.0005 mm Accuracy: ±0.0035 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Measuring force: 1.3–2.0 N Reversal span: 0.5 mm Protection class: IP54 Calibration: ISO 17025 certificate included Digital: yes eClass: 21170308 ETIM: EC003591 Special features Compact electronic dial indicator for micro‑precision Wireless data transmission and USB connection Colour touchscreen for quick operation Supplied calibrated to ISO 17025 with certificate Suited to workshop and laboratory environments Category: Messuhren FAQ What measuring range does this instrument cover? The instrument covers a measuring range of 0–100 mm, placing it in the micro class for fine mechanical measurements. Is the device supplied with a calibration certificate? Yes, the Messuhr is delivered fully calibrated to ISO 17025 and includes the calibration certificate for immediate use in accredited processes. How can measurement results be transferred to a computer? Measurement data can be transferred wirelessly or via USB for straightforward logging and integration into quality documentation. What protection does the housing provide against workshop conditions? The housing meets IP54, offering protection against dust ingress and water splashes common in workshop settings. What resolution and accuracy can be expected during inspection tasks? Expect a resolution of 0.0005 mm and an accuracy of approximately ±0.0035 mm, enabling sensitive detection of small dimensional deviations. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Dial Indicator With Tolerance Marks, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a large 60 mm dial, 0.01 mm resolution and an ISO 17025 calibration certificate for reliable, traceable inspection results; order the item directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Metrology Dial indicator — 60 mm dial, 0–100 mm range The dial indicator is a precision contact gauge designed for comparative measurements, run‑out checks and fine adjustment tasks in workshops and inspection benches. 60 mm dial for clear reading Resolution 0.01 mm standard Includes tolerance marks for quick checks Delivered with ISO 17025 calibration certificate Precise readings that support consistent production This instrument combines a large, easy‑to‑read 60 mm dial with a fine 0.01 mm graduation, enabling rapid, repeatable assessments on parts and setups. The mechanical design yields a reading habit close to traditional comparators but with modern resolution; the stated accuracy 0.04 mm gives a reliable error band for routine quality control. For production environments where time and reproducibility matter, the gauge reduces interpretation time and supports faster decision cycles by presenting clear numeric feedback rather than approximate visual checks. Built for inspection speed and everyday robustness The construction and scale layout are optimised for inspection workflows: the visible tolerance marks speed up go/no‑go decisions during batch checks and set‑up tasks, while the analogue display allows instant visual assessment without menu navigation. The compact footprint and mechanical drive make the device especially suitable for toolrooms and maintenance benches that require quick comparative checks, gauges for run‑out control and fast measurement of small features. The robust dial and pointer combination supports long service life under normal workshop conditions. Calibrated traceability and quality assurance Delivered fully calibrated under ISO 17025, the unit arrives with a traceable calibration certificate, ensuring measurement results can be traced back to national standards. This traceability simplifies incoming inspection records and audit requirements, and it demonstrates conformity for supplier quality control processes. The calibration status and documentation reduce qualification time for the gauge within production control systems and support procurement decisions where certified measurement capability is required. Contact Metav Werkzeuge for tailored technical advice and supply of the Microtech Metrology dial indicator (SKU 120121990) with ISO 17025 calibration certificate from Emmerich. Technical data Article number: 120121990 GTIN: 4061905451812 Manufacturer: Microtech Metrology Key figures Measuring range: 0–100 mm Dial diameter: 60 mm Resolution: 0.01 mm Accuracy: 0.04 mm Display type: analogue Special features Tolerance marks for fast visual checks Delivered with ISO 17025 calibration certificate Suitable for fine mechanical inspection and run‑out testing FAQ What resolution does the instrument provide? The Microtech Metrology dial indicator (SKU 120121990) offers a resolution of 0.01 mm for fine incremental readings. Is a calibration certificate supplied with the gauge? Yes — this unit is delivered fully calibrated according to ISO 17025 and includes the corresponding calibration certificate. For which tasks is this dial indicator best suited? The gauge is ideal for comparative measurements, run‑out checks and routine inspection tasks in workshops and toolrooms where clear, repeatable analogue indication is required. How do the tolerance marks help in daily inspection? Tolerance marks on the dial allow immediate go/no‑go evaluation without calculating limits, speeding up batch checks and set‑ups during production control. Is the device digital or analogue? This is an analogue dial instrument, chosen for quick visual assessment and robust operation in everyday workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Digital Indicator 0.01mm Resolution Absolute Output RB 6, Glass Scale, Supplied in Case - Metav IndustryLine
Precise inspection made straightforward: combine 0.01 mm resolution, ±0.02 mm accuracy and an absolute measuring system with RB 6 data output for reproducible results and faster traceability. Benefit from the glass-rail scale for stable readings and a compact 0–100 mm range that suits routine shop-floor checks. Order the digital dial gauge directly via Metav Werkzeuge or ask the consultants if further configuration is required. Digital dial gauge M301.024 — 0–100 mm, 0.01 mm resolution (Metav IndustryLine) Digital dial gauge M301.024 provides absolute‑system measurement and RB 6 data output for integration into inspection chains and test rigs Absolute measuring system with RB 6 output Resolution 0.01 mm with 0.02 mm accuracy Glass-rail scale for precise scanning Lightweight 0.5 kg for easy handling Reliable dimensional control through measurable precision The core benefit of this compact inspection instrument is its combination of 0.01 mm resolution and proven ±0.02 mm accuracy, which supports routine verification tasks and in‑process checks. The absolute measuring system retains origin without requiring re‑zeroing after power cycles, reducing setup time and the risk of offset errors. For operators and quality engineers, this translates into fewer measurement interruptions and a consistent basis for pass/fail decisions. The instrument’s measuring range 0–100 mm is ideal for bench‑level components and small assemblies where a balance of reach and stiffness is required. Data-ready operation for modern workflows Equipped with RB 6 data output, the device connects directly to data loggers and measurement networks, enabling automated capture of results and straightforward documentation. The integrated digital display with ON/OFF, ORIGIN, PRESET and mm/inch buttons simplifies format switching and reference setting on the fly. These features support traceable processes and quicker reporting, making the gauge an efficient component of a digital calibration loop or an automated inspection station. The absolute system and electronic interface reduce human transcription errors and speed up quality‑control throughput. Practical design that supports daily workshop use A glass‑rail scale ensures reliable optical scanning and contributes to stable, repeatable readings across many cycles. At approximately 0.5 kg, the instrument is light enough for handheld checks yet robust for fixed fixturing. The specified measuring force >1.2 N provides consistent contact behaviour, helping to limit variation caused by differing applied pressure. Controls are arranged for straightforward operation and the compact form factor assists access to confined measuring positions, which is beneficial during machine set‑up or component inspection. Where the gauge adds value on the shop floor This device is suited to routine dimensional control, incoming inspection and machine set‑up where rapid, repeatable results and digital traceability matter. Typical applications include small parts inspection, toolroom checks and comparative measurements in production lines. The combination of an absolute encoder, fine resolution and direct data output is particularly valuable when measurement results feed automated statistics or SPC systems. Maintenance requirements are low; the electronic system eliminates mechanical backlash common to traditional indicators, improving longevity under regular use. For integration advice or to request the Metav IndustryLine digital dial gauge with RB 6 output and tailored measuring-chain recommendations, contact Metav Werkzeuge for expert guidance and order support Technical data Article number: M301.024 GTIN: 4054469168913 Manufacturer: Metav IndustryLine Customs tariff number: 90318020 eClass: 21170308 ETIM: EC003591 Measurements and performance Measuring range: 0–100 mm Resolution (display): 0.01 mm Accuracy: ±0.02 mm Measuring force: >1.2 N Weight: 0.5 kg Power supply: 3 V Features and materials Absolute measuring system Data output: RB 6 Digital display with ON/OFF, ORIGIN, PRESET, mm/inch Scale with glass rail for precise scanning Category: dial gauges (messuhren) Intended use: dimensional inspection, machine set‑up, in‑process checks FAQ What measurement range does the gauge cover? The gauge covers a measuring range of 0–100 mm, suitable for small components and shop‑floor checks with the M301.024 digital dial gauge. How accurate and precise is the instrument? The instrument offers a resolution of 0.01 mm and an accuracy of ±0.02 mm, providing reliable repeatability for routine inspection tasks. Can measurement data be exported for documentation? Yes, the device features an RB 6 data output for direct connection to data loggers or measurement chains for automated documentation. Is the display able to switch units? The digital display includes a mm/inch button so readings can be toggled between metric and imperial without additional conversion. What type of scale does the instrument use for scanning? The measuring device uses a glass‑rail scale for more accurate optical scanning and improved repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Probe Gauge Digital Touchscreen With 2m Cable ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable measurement results and quick data capture: the compact probe combines ±0.005 mm accuracy and wireless + USB data output, and is delivered fully calibrated to ISO 17025. Order the Messtaster directly via Metav Werkzeuge or ask our consultants if needed. Messtaster — digital measuring probe, 0–100 mm range, Microtech Metrology The Messtaster is a compact digital measuring probe for precision inspection in workshop and laboratory environments, offering integrated wireless and USB data transfer and a colour touchscreen for straightforward readout. High accuracy ±0.005 mm Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Consistent results for quality control and production A focused design delivers repeatable measurements where they matter most: production checks and first-article inspection. The instrument’s accuracy (±0.005 mm) and fine display resolution support tight tolerances, reducing scrap and rework. Because the unit is calibrated to ISO 17025, measurement results can be referenced in formal quality documentation; this traceability simplifies audits and supplier qualification. The compact form factor and defined measurement range make the probe suitable for bench inspection and inline control. Fast data capture that integrates with inspection workflows Data transfer options speed up documentation and eliminate transcription errors: both wireless and USB outputs are available for direct connection to inspection software or data loggers. The 2.4" touchscreen provides an immediate, readable interface for quick set-up and live readings, while the digital output enables batch export and statistical process control. These capabilities shorten measuring cycles and support lean workflows, so inspection becomes an integrated, value-adding step rather than a bottleneck. Robust handling for routine workshop use Built for everyday use, the probe combines a responsive digital display with practical hardware details such as a 2 m cable for flexible positioning and a durable casing designed for workshop environments. The device’s compact footprint and intuitive controls reduce operator fatigue and training time, so measurement tasks are completed reliably and efficiently. Delivered with a formal calibration certificate, the instrument provides both immediate usability and long-term confidence in measurement integrity. For specification advice, calibration documentation or to order through Metav Werkzeuge in Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for personalised guidance and delivery details Technical data Article number: 120129907L GTIN: 4061905042928 Brand: Microtech Metrology Facts Measuring range: 0–100 mm Resolution: 0.0001 mm Accuracy: ±0.005 mm Display: 2.4" colour touchscreen Special features Data output: Wireless + USB Delivered calibrated: ISO 17025 certificate included Colour 2.4" touchscreen display 2 m cable included Digital measuring probe, category: Messuhren FAQ Is the device supplied with a calibration certificate? Yes. The Messtaster from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceable quality records. What is the effective measuring range and resolution? The instrument covers a measuring range of 0–100 mm with a display resolution of 0.0001 mm, suitable for precision inspection tasks where sub‑hundredth millimetre detail is required. How is measurement data exported? Data can be exported via the unit’s wireless interface or through USB, enabling direct integration with inspection software and data collection systems for automated logging. Can the probe be used on a shop floor or only in a laboratory? The probe is designed for workshop use as well as laboratory inspection: it features a durable enclosure, a practical 2 m cable, and an easy-to-read touchscreen for robust everyday operation. Which SKU should be referenced when ordering or requesting documentation? Please refer to SKU 120129907L when ordering or requesting the calibration certificate and technical documentation for this Microtech Metrology probe. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
105mm Small Magnetic Indicator Stand Central Clamp, Permanent Base 10 kg - Metav IndustryLine
Take advantage of a compact, 10 kg holding capacity and a central force clamp to secure fine measurement probes reliably; order directly via Metav Werkzeuge or consult the specialists for application advice. Magnet-Messstativ M208.111.1 — Small magnetic stand with central force clamp, 10 kg permanent base (Metav IndustryLine) The Magnet-Messstativ M208.111.1 is a compact magnetic measurement stand designed for stable positioning of dial test indicators and fine probes in workshop and inspection environments Compact magnetic stand with small footprint Central force clamp for axial locking 10 kg magnetic holding capacity Suitable for dovetail-mounted indicators Stable support that reduces measurement variability The magnetic base delivers a consistently strong hold, with a rated 10 kg magnetic force that secures the stand to ferrous surfaces and minimises slippage during inspection. Coupled with the central force clamp, the clamping action converts operator rotation into a uniform axial lock, which reduces torque-induced displacement and improves repeatability. Built for precision tasks, this configuration keeps the probe steady so that readings remain stable even during fine adjustments, supporting faster and more reliable quality checks. Small footprint and fast setup for busy benches A deliberately compact construction and low mass (approx. 0.25 kg) make the instrument easy to position and reconfigure across multiple machines and measuring stations. The base accepts an Ø35x35, M4 mounting interface, enabling straightforward attachment to stands, posts or ancillary fixtures. Compatibility with dovetail-mounted indicators ensures that standard dial test indicators and fine contact probes can be deployed without additional adapters, reducing setup time and simplifying routine inspection workflows in production and maintenance. Universal utility across workshop inspection tasks Classified as a universal magnetic stand, the unit is suitable for a wide range of measurement and clamping applications where a reliable reference is required. The permanent magnetic base provides maintenance-free holding compared with electromagnet solutions, while the robust clamp mechanism delivers secure locking without complex adjustments. This combination supports repeatable inspection of components and rapid transfer between jobs, making the item a pragmatic choice for machine shops, toolrooms and inspection benches that need efficient, dependable positioning. Contact Metav Werkzeuge in Emmerich for tailored advice or to reserve the compact magnetic stand M208.111.1; local stock and expert guidance are available by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M208.111.1 GTIN: 4054469159461 eClass: 21170601 Manufacturer: Metav IndustryLine Facts Magnetic force: 10 kg Weight: 0.25 kg Foot: Ø35x35, M4 Tariff number: 90319000 Special features Permanent magnetic base Central force clamp Universal application Suitable for dial test indicators with dovetail mounting Category: Magnet stands FAQ What holding capacity does the magnetic stand provide? The magnetic stand offers a holding force of 10 kg, giving reliable fixation for typical inspection setups with dial indicators and small probes. Is the clamping mechanism suitable for delicate probes? Yes, the central force clamp provides axial locking with uniform pressure, which helps protect delicate fine probes and maintains stable positioning. Which indicators are compatible with the stand? Compatibility is provided for indicators and probes using a dovetail mounting; this allows common dial test indicators to be mounted directly. What is the mounting interface on the base? The base features an Ø35x35 mounting interface with an M4 thread, enabling straightforward attachment to posts and fixtures. Is the magnetic base permanent or switchable? The base is a permanent magnetic type, offering maintenance-free holding without the need for a power source. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Ball Probe, Thread M2.5 For Dial Indicator - Metav IndustryLine
Take advantage of the combination of compact design and straightforward compatibility for consistent surface probing results; order the accessory directly via Metav Werkzeuge or contact our consultants for application advice. Measuring tip M208.173 — Ball Ø10 mm, Thread M2.5 for Dial Gauges (Metav IndustryLine) A Measuring tip M208.173 designed as a 10 mm spherical contact with an M2.5 threaded mount for precise probing on dial indicators across workshop and inspection tasks. 10 mm spherical contact tip M2.5 threaded fitting for dial gauges Lightweight: 0.1 kg Precise contact geometry for more reliable readings The 10 mm ball contact provides a defined, repeatable point of engagement that reduces local surface deformation and yields consistent probe behaviour when checking profiles or resting measurements. As a dedicated measuring tip, this geometry minimises lateral ambiguity at the contact point and supports stable readings on curved or flat surfaces alike. The result is improved precision and enhanced repeatability in routine inspection tasks, making the component suitable as a reliable accessory in a standard metrology toolkit. Simple mounting and compact form that fits restricted areas Fitted with an M2.5 thread, the tip is compatible with dial indicators that accept this common mounting size, allowing quick replacement or configuration changes without special adapters. The compact contact head and lightweight construction make it easy to integrate into confined setups, where bulkier probes would obstruct access. This straightforward interface reduces downtime during tool changes and helps maintain measurement flow in production or maintenance environments. Practical integration into inspection routines and stock management As an accessories item for dial gauges, the component supports modular measurement strategies: swap the probe to suit varying surface types or reach requirements, keeping a small inventory of contact heads for fast adaptation. The compact nature and clear specification simplify storage and procurement documentation, while the defined contact geometry assists quality teams in creating repeatable test plans. For suppliers and workshops seeking predictable probe behaviour, this accessory provides a simple, focused solution that complements existing indicator fleets. Contact Metav Werkzeuge for matching dial gauge accessories or request specialist advice on the Metav IndustryLine measuring tip M208.173 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M208.173 GTIN: 4054469105239 Eclass: 21170324 Weight: 0.1 kg Tariff number: 90319000 Facts Ball diameter: 10 mm Thread: M2.5 Suitable for: dial gauges with M2.5 mounting Special features Accessory for measurement devices Category: Accessories (measurement equipment) Label: Measuring tip for dial gauge, ball 10 mm, thread 2.5 mm FAQ Is this tip compatible with all dial indicators? Compatibility is determined by the mounting thread; the measuring tip M208.173 fits dial indicators that accept an M2.5 threaded contact. What is the contact geometry and why does it matter? The 10 mm spherical contact on the M208.173 provides a defined point of contact that improves measurement repeatability and reduces local surface deformation during probing. Can the tip be used for measurements in tight or recessed areas? Yes, the compact head and lightweight nature make the tip suitable for restricted spaces where larger probes would not fit. How should the tip be stored or inventoried for workshop use? Keep the tip with other dial gauge accessories in a dedicated compartment or drawer, labelled by article number M208.173, to enable quick selection and reduce setup time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Ball Tip Dial Gauge Contact, M2.5 Threaded Shank - Metav IndustryLine
Take advantage of the spherical 10 mm contact geometry and the universally compatible M2.5 thread to ensure reliable, repeatable contact for dial gauge measurements; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. M208.161 – Spherical contact tip for dial gauge, Ø10 mm, M2.5 thread (Metav IndustryLine) The M208.161 is a spherical measuring insert designed for dial gauges with an M2.5 connection, delivering stable point contact for workshop and inspection tasks. Spherical contact tip Ø10 mm Fits dial gauges with M2.5 thread Precision accessory for repeatable readings Compact design for confined measuring spaces Reliable point contact for consistent results The spherical contact tip provides a defined point of contact that reduces surface abrasion and helps maintain a consistent measurement reference, which is essential when comparing repeat measurements. With a Ø10 mm geometry, the insert concentrates contact forces reliably without large contact-area variability, improving repeatability on slightly curved or uneven workpiece surfaces. This mechanical simplicity supports efficient throughput in quality control routines while keeping measurement uncertainty low. Simple compatibility and fast replacement Designed for dial gauges with an M2.5 connection, the insert is straightforward to fit and replace, minimising downtime during inspection cycles. The compact form factor suits confined measuring positions and fixtures where larger probes would obstruct access. Its low mass contributes to minimal influence on the indicator’s moving system, preserving the instrument’s responsiveness and ensuring stable pointer behaviour during both static and light dynamic checks. Practical benefits across workshop and inspection use As an accessory for precision measuring instruments, this insert enhances everyday metrology tasks by enabling reliable contact on small features, radii and step measurements. The component supports a structured measurement workflow: quick exchangeability reduces setup time, the spherical tip aids alignment on rounded edges, and the rugged, no-frills design fits established inspection processes. Use with standard dial gauges in machine shops, toolrooms and incoming inspection to raise the consistency of comparative checks. For compatibility confirmation or to order the Metav IndustryLine M208.161 spherical contact tip (Ø10 mm, M2.5), contact Metav Werkzeuge today and discuss application requirements with our specialists Technical Data Article number: M208.161 SKU: M208.161 GTIN: 4054469105130 ECLASS: 21170324 Tariff number: 90319000 Category: Accessories (Measuring instruments) Facts Weight: 0.1 kg Contact diameter: Ø10 mm Thread: M2.5 Suitable for dial gauges with M2.5 connection Special features Spherical contact tip for defined point contact Compact design for confined measuring spaces Precision accessory for repeatable readings Accessory for dial indicators / dial gauges Story trigger: accessory FAQ What thread does this contact tip use? The M208.161 contact tip uses an M2.5 thread and is intended for dial gauges with an M2.5 connection. What is the contact diameter of the insert? The contact geometry has a Ø10 mm spherical tip, which is specified for consistent point contact. Can the insert be used on slightly curved surfaces? Yes, the spherical shape of the M208.161 improves alignment on small radii and slightly curved workpiece areas, supporting repeatable measurements. Is the accessory suitable for tight measuring positions? The compact design makes the insert well suited to confined spaces and fixtures where larger probes would be impractical. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Depth Gauge Set With 0.01mm Dial Indicator And Extensions 10/20/40/70/100mm, Factory Standard - Metav IndustryLine
Achieve reliable depth measurement with a finely graduated dial indicator (0.01 mm) and a sturdy 100 x 16 mm measuring bridge; the included extension rods provide flexible reach up to 120 mm messtiefe. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. Depth dial gauge set M208.060.2 — 0–10 mm range, 0.01 mm graduation (analogue) The Depth dial gauge set M208.060.2 is a precision instrument for repeatable depth measurements in workshop inspection, toolmaking and assembly tasks 0.01 mm resolution dial indicator 100 x 16 mm measuring bridge Five extension rods: 10–100 mm Robust metal housing with tolerance marks Repeatable, measurable precision for inspection tasks The set centres on an analogue dial indicator with a 0–10 mm measuring range and 0.01 mm graduation, delivering clear, incremental readings suitable for routine quality control. The mechanical dial provides immediate visual feedback without battery dependence, making the system reliable in production environments. The graduated scale and defined increments support rapid decision-making on the shop floor, while the solid contact tip transmits motion precisely to the indicator for reproducible results. This configuration is aimed at users who prioritise consistent, traceable depth checks over electronic features. Flexible reach for varied components and assembly work A compact 100 x 16 mm measuring bridge serves as the stable reference for depth measurements, while the set of five extension rods (10, 20, 40, 70 and 100 mm) expands the effective reach to a maximum messtiefe of 120 mm. This modular approach allows measurement of shallow recesses and deeper bores without changing the basic measuring principle, reducing setup time and potential alignment errors. The extensions screw to the contact stem, preserving axial alignment and ensuring that the displayed travel on the dial corresponds directly to the workpiece depth. Robust build quality for everyday workshop use Constructed with a metal housing with tolerance marks, the instrument is built to withstand regular handling in industrial environments; the tolerance marks aid repeat settings and visual checks. At 0.62 kg the set balances solidity with manoeuvrability on benches and in inspection rigs. The unit conforms to the supplier’s factory standard (Werksnorm), providing a predictable baseline for in-house quality procedures. Wherever stability and simple, mechanical reliability are required, this depth gauge set delivers a pragmatic combination of durability and usability. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine depth gauge set and to arrange supply from our Emmerich facility Technical data Article number: M208.060.2 GTIN: 4054469168111 Manufacturer: Metav IndustryLine Facts Measuring range: 0–10 mm Resolution / Graduation: 0.01 mm Measuring depth (with extensions): 120 mm Bridge dimensions: 100 x 16 mm Extension rods: 10 mm, 20 mm, 40 mm, 70 mm, 100 mm Weight: 0.62 kg Special features Analogue dial indicator Metal housing with tolerance marks Werksnorm (factory standard) eClass: EC003591 ETIM: 21170308 Customs tariff number: 90178090 FAQ What measuring range does the depth gauge cover? The depth gauge provides a 0–10 mm measuring range on the dial, with extended reach achieved using the supplied extension rods for deeper tasks. How deep can measurements be taken with the supplied extensions? With the bridge and the five extension rods (10, 20, 40, 70 and 100 mm) assembled as recommended, the instrument attains a practical measuring depth of up to 120 mm. What is the resolution and how is the value read? The dial indicator has a 0.01 mm graduation; the analogue dial shows increments directly, enabling quick visual checks without electronic display dependency. Are the extension rods included in the delivery? Yes, the set includes extension rods of 10, 20, 40, 70 and 100 mm to provide flexible measuring options for varied components. Is the instrument suitable for shop-floor quality control? The Metav IndustryLine depth gauge set M208.060.2 is designed for repeatable shop-floor depth checks, offering robust mechanical construction and clear graduations for routine inspection work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Depth Gauge Set With 10×0.01mm Dial Indicator, Extensions 10/20/40/70/100mm, Metal Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm resolution, modular extensions up to 120 mm measuring depth and a robust metal housing for repeatable depth checks in the workshop; order the Depth Gauge Set M208.060.1 directly via Metav Werkzeuge or ask our consultants if needed. Depth Gauge Set M208.060.1 – Analogue dial indicator, 10 mm range, 63 × 16 mm bridge (Metav IndustryLine) A Depth Gauge Set M208.060.1 designed for precise depth and comparative measurements in machining and inspection applications, supplied with a compact measuring bridge and five modular extensions. Analogue dial with 0.01 mm resolution 63 × 16 mm measuring bridge Extension set up to 120 mm reach Metal housing with tolerance marks Workshop standard (Werksnorm) ready Precision where small depths matter The set centres on an analogue dial indicator with a 10 mm range and a fine 0.01 mm graduation, delivering a clear, mechanical readout for repeatable checks. Classified in the micro range for depth gauges, the design supports fine mechanical work where small depth differences are decisive. The compact 63 × 16 mm bridge keeps the measuring geometry rigid and minimises deflection, which translates into reliable comparative readings on small parts such as recesses, bores and precision components. Extendable reach for versatile depth checks Five supplied extensions (10, 20, 40, 70 and 100 mm) provide staged reach options that combine to a maximum practical measuring depth of 120 mm, enabling inspection of deeper cavities without compromising stability. The modular concept allows the set to be configured for short, accurate checks or extended reach tasks by stacking extensions in sequence. This flexibility reduces the need for multiple dedicated gauges and supports a range of workshop and inspection scenarios. Robust construction for routine workshop use A metal housing with tolerance marks and a solid mechanical dial movement provide long-term resilience in everyday use. The construction balances low mass with stiffness to keep the instrument stable during measurement, while the analogue format offers robustness where electronic systems may be unnecessary. Supplied to Werksnorm, the set fits routine quality control procedures and is easy to integrate into standard inspection workflows. For precise depth measurement tasks and tailored advice, contact Metav Werkzeuge in Emmerich — Metav IndustryLine specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M208.060.1 GTIN: 4054469168104 Manufacturer: Metav IndustryLine SKU: M208.060.1 Facts Measuring range: 0–10 mm Resolution: 0.01 mm Measuring depth: 120 mm Bridge size: 63 × 16 mm Weight: 0.62 kg Special features Analogue dial indicator Metal housing with tolerance marks Extensions: 10, 20, 40, 70, 100 mm Werksnorm Category: Dial indicators FAQ What measurement resolution does the set provide? The Depth Gauge Set M208.060.1 features an analogue dial with a 0.01 mm graduation, offering clear incremental readings for workshop and inspection tasks. How deep can the set measure with the supplied extensions? Using the included extensions (10, 20, 40, 70, 100 mm) the set provides a practical measuring depth of up to 120 mm for deeper cavities and bores. Is this instrument suitable for fine mechanical components? Yes. The set is classified in the micro range for depth gauges (0–10 mm) and the rigid 63 × 16 mm bridge makes it appropriate for fine mechanical and small-part measurements. Does the set come with a calibration certificate? The Depth Gauge Set M208.060.1 is supplied to Werksnorm; no ISO 17025 statement is provided in the product data, so only the factory norm applies unless otherwise specified. What materials and durability features are included? The instrument has a metal housing with tolerance marks and a mechanically driven dial, designed for workshop durability and repeatable use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Depth Gauge Set With 16mm Stem Dial Indicator 0.01mm Resolution, Extensions 10/20/40/70/100mm Werksnorm - Metav IndustryLine
Take advantage of the compact Ø16 mm stem, the 0.01 mm resolution and the modular extension rods that extend measuring reach to 120 mm; this combination delivers precise depth measurement for fine mechanical and workshop inspection tasks. Order this depth dial gauge set directly via Metav Werkzeuge or consult our specialists if required. Metav IndustryLine Depth Dial Gauge Set M208.060.3 – Ø16 mm stem, 10 mm range (0.01 mm) A Depth Dial Gauge Set M208.060.3 designed for high‑precision depth checks and step measurements in fine mechanical, toolroom and workshop metrology. Ø16 mm stem for narrow bores and round stops 0.01 mm dial resolution for fine indication Extension rods 10, 20, 40, 70 and 100 mm Metal housing with tolerance marks Accurate depth readings for fine mechanical work The set centres on a 10 mm range dial indicator with a 0.01 mm graduation, delivering clear and repeatable readings for small depth tasks. Classified in the Micro range (max. 10 mm), the instrument is tailored to precision work such as watchmaking, valve‑seat inspection and small bores where short, torsion‑resistant stems improve stability. The analogue display keeps the indication simple and direct, while the metal housing with integrated tolerance marks helps to spot deviations at a glance, reducing inspection time without compromising reliability. Modular reach and practical measuring depth A system of five supplied extension rods (10, 20, 40, 70 and 100 mm) provides staged reach so that a single indicator covers a wide span of depth tasks up to the specified measuring depth of 120 mm. The Ø16 mm stem is compatible with round stops and depth bridges commonly used in bench fixtures, allowing quick conversion between short‑range and extended checks. The modular approach lowers tool inventory and speeds up process checks, which in turn reduces setup time and the likelihood of measurement errors during repetitive inspection cycles. Robust, workshop‑ready construction Built for everyday use in production and toolrooms, the instrument features a sturdy metal body and a balanced feel that supports consistent contact pressure during measurement. The dial's mechanical design provides tactile feedback for controlled probing, and the set’s overall weight is well matched to handheld operation. Supplied to factory standard (Werksnorm), the set is engineered for a long service life under standard workshop conditions, combining durability with measurement transparency through its marked housing. Streamlined inspection workflow and application fit Integrating this depth indicator into incoming inspection, in‑process checks and final verification reduces rework and shortens throughput times by enabling fast, trustworthy depth assessment at the bench. The analogue dial is ideal where a visual, immediate readout suffices; the modular rod set makes the instrument versatile across assembly, maintenance and quality‑control tasks. For operations seeking a compact, reliable depth measurement tool that complements existing gauges and fixtures, this set provides a pragmatic balance of precision and practicality. For technical advice or to secure this Metav IndustryLine depth gauge set, contact Metav Werkzeuge in Emmerich by phone or e‑mail and discuss compatibility with current inspection routines. Technical data Article number: M208.060.3 GTIN: 4054469168180 Manufacturer: Metav IndustryLine Facts Measuring range: 0–10 mm Resolution: 0.01 mm Measuring depth: 120 mm Stem diameter: Ø16 mm Weight: 0.62 kg Special features Extensions: 10, 20, 40, 70, 100 mm Metal housing with tolerance marks Analog dial indicator, Werksnorm Classification: Micro (max. 10 mm) FAQ Is the set delivered with extension rods? Yes. The depth dial gauge set M208.060.3 is supplied with extension rods of 10, 20, 40, 70 and 100 mm to extend reach up to the 120 mm measuring depth. What is the resolution and suitable applications? The indicator offers a 0.01 mm resolution, making the set suitable for fine mechanical tasks, toolroom checks and workshop inspection where sub‑hundredth millimetre indication is required. Does the instrument require special calibration on delivery? The set is supplied to factory standard (Werksnorm). If a specific accredited calibration is needed, please specify requirements when ordering; the standard delivery follows the stated Werksnorm. Can the stem be used with depth bridges or round stops? Yes. The Ø16 mm stem is intended for use with round stops and depth bridges commonly used in bench fixtures, enabling stable measurements in narrow bores and stepped features. Is the display digital or analogue and are data outputs available? The device is an analogue dial indicator; there is no integrated digital data output included with this set. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Indicator 0.01mm Resolution Rotating Bezel Lift Lever Plastic Case - Metav IndustryLine
Robust 56 mm dial readability, a 0.01 mm graduation and a practical lift lever combine to deliver reliable micro‑measurements for process control; order directly via Metav Werkzeuge or consult our specialists for application support. Dial indicator M208.009 — 56 mm dial, 0–10 mm range, 0.01 mm resolution (Metav IndustryLine) The Dial indicator M208.009 is an analogue gauge for precise short‑range measurements in fine mechanics and workshop quality checks, featuring a rotating bezel for zero setting and a lift lever for quick probe release. 56 mm dial for clear readability 0.01 mm graduation for fine resolution Lift lever for fast probe retraction Rotating bezel for zero setting Precision where it counts for micro measurements The instrument is designed for micro‑class checks with a measuring span of 0–10 mm and a reading step of 0.01 mm, which makes it suitable for delicate inspection tasks. The specified accuracy of ±0.017 mm provides a predictable error band for routine quality control; this level of repeatability supports statistical process control and reduces the need for repeated rework. An analogue display simplifies rapid visual assessment, while the clear 56 mm dial improves readability under workshop lighting. Workshop‑ready ergonomics to speed up inspection cycles A compact, well‑balanced gauge reduces operator fatigue during repetitive use. The lift lever enables swift retraction of the contact point, cutting cycle times on parts that require frequent repositioning. The rotating outer ring (bezel) permits fast zeroing at the measuring reference, so comparative measurements and runouts can be recorded without additional adjustments. At roughly 0.27 kg, the instrument is light enough for handheld use yet stable on stands for bench inspection. Simple operation and reliable adjustment for consistent results The analogue layout avoids electronic dependencies while offering precise graduations for direct readings. The rotating bezel is useful for setting a reference zero or for comparative gauging against a master. Clear tolerance marks on the housing aid quick pass/fail decisions at the bench; the device is produced to factory standard (Werksnorm) and is intended for immediate integration into existing inspection routines. Basic upkeep is straightforward: keep contact faces clean and check mechanical play periodically to maintain measurement integrity. Practical applications and benefits for production environments This dial indicator is particularly suited to fine mechanical shops, toolrooms and assembly lines where short‑range checks are frequent: component thickness checks, spindle runout, fixture verification and small bearing inspection. As a mechanical, analogue gauge it provides a cost‑effective, low‑complexity solution for immediate measurement tasks and complements higher‑end digital systems for cross‑checks. The combination of compact size, fine graduation and practical controls supports faster quality decisions and more predictable process output. Contact Metav Werkzeuge in Emmerich for tailored application advice and fast supply of the Metav IndustryLine dial indicator M208.009 — expert guidance is available by email or phone Technical data Article number: M208.009 GTIN: 4054469103709 Brand: Metav IndustryLine Numbers / Core technical data Measuring range: 0–10 mm Resolution / Graduation: 0.01 mm Dial diameter: 56 mm Accuracy: ±0.017 mm Weight: 0.27 kg Special features / Versions Analogue dial indicator (mechanical) Lift lever for probe retraction Rotating outer bezel for zeroing Delivered to Werksnorm (factory standard) Classified as Micro (0–10 mm range) FAQ Is the dial indicator delivered calibrated? The instrument is delivered to the factory standard (Werksnorm); specific calibration certificates are not indicated for this model. What resolution and accuracy can be expected? The M208.009 provides a 0.01 mm graduation and an accuracy of ±0.017 mm, suitable for routine micro‑measurement tasks. How is the zero set and adjusted? Zeroing is performed via the rotating outer bezel; the bezel allows quick comparative measurements without altering the probe position. Can the lift lever be used during repeated checks? Yes — the built‑in lift lever on the M208.009 speeds repetitive gauging by retracting the contact point for repositioning. For which applications is this indicator most suitable? The instrument is intended for short‑range inspections in fine mechanics, toolrooms and general workshop quality control where micro‑measurements are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precise measurements with dial indicators for workshop and production use
Dial indicators are high-quality measuring devices designed for a variety of measuring ranges and fine-tuning tasks. These instruments, available in digital and analogue versions, enable precise assessment of concentricity, flatness and comparative measurements in confined or critical areas.
How dial indicators work and where they are essential
Analogue dial indicators transmit the linear movement of the probe via a rack-and-pinion mechanism to the pointer, with an additional revolution counter showing extended travel. Many types operate in both compression and tension, so a wide effective measuring range is covered. Lever-type indicators use a lever system instead of a rack, offering a smaller range but finer resolution. Typical workshop applications include runout checks at the lathe, setting up depth on milling tables or circular saws, and comparative checks during series production.
Tangible benefits for everyday production
- Fast, repeatable readings for comparison work, reducing setup and inspection time.
- Stable measuring force and hardened contact tips for reliable, wear-resistant contact and consistent results.
- Broad selection: digital dial indicators, mechanical dial indicators, depth gauges, lever-type test indicators, fine‑point test indicators and thickness gauges cover most shop tasks.
- Reduced risk of measurement error through appropriate instrument choice and accessories, improving first-pass yield.
- Flexible deployment on machines and inspection benches thanks to standardised mounts and probes.
Why choose Metav as your precision partner
Metav stands for the democratisation of precision, combining decades of expertise with a comprehensive inventory for industry, crafts and trade. From Emmerich, Metav operates as a practical quality filter for the European market, supplying over 48,000 satisfied customers and more than 250,000 products. For buyers who prioritise dependability and a single-source approach, Metav’s range of dial indicators and related measuring equipment provides a technically sound and convenient solution.
Core takeaway
Dial indicators deliver precise, repeatable measurements across a variety of specialised tasks; selecting the correct type—whether digital, analogue or lever-type—ensures reliable results and smoother production processes.
FAQ
What is the main difference between analogue and digital dial indicators?
Analogue dial indicators transmit movement via a rack-and-pinion and show mechanical pointer travel, which can be advantageous for visual trend detection; digital dial indicators provide direct numerical readout and often allow data output for logging and analysis, both of which are available from Metav.
When should I use a lever-type test indicator instead of a standard dial indicator?
Use a lever-type indicator when you need finer resolution over a small measuring range or when the probe must access tight spaces; lever-type instruments are particularly useful for checking runout and small surface variations.
How do I avoid damaging an analogue dial indicator’s gearing?
Avoid forcing the probe beyond its travel range; where significant overtravel is possible, choose a model with an appropriate range or a built-in stop. A drag pointer or anti-backlash feature can also reduce the risk of gear damage by preventing delayed pointer return.
Are special contact tips necessary for different materials?
Yes. For consistent results and reduced wear, choose hardened contact tips or balls appropriate to the material and surface finish being measured; Metav’s product range includes a variety of probe tips and accessories for this purpose.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com