Precision dial indicators for accurate length and runout checks
Dial indicators and related gauges provide precise measurement of small lengths and deviations, serving applications such as concentricity, flatness and comparison checks on lathes and milling machines, and offering both digital and analog options to suit different measuring ranges. These instruments are used with appropriate accessories for tasks like depth measurement or runout testing and feature hardened contact faces or balls for reliable contact; typical variants include dial indicators, test indicators and depth gauges. Analog types transmit spindle movement via rack and pinion to the pointer and may include a drag pointer to prevent gear damage, while digital versions give straightforward numeric readouts for quick interpretation. Using these gauges improves setup accuracy, process control and the repeatability of measurements in metalworking and workshop environments.
100mm Dial Indicator Digital Absolute, 0.001mm Resolution, USB, IP80, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high-resolution measurement, robust data transfer and accredited calibration for reliable inspection results; combine 0–100 mm range with USB output and ISO 17025 calibration for traceable workflows. Order directly via Metav Werkzeuge or consult the Metav specialists for integration advice. Microtech Metrology Digital Dial Gauge — Absolute system, USB output The digital dial gauge provides high-resolution, absolute measurements for workshop inspection and quality control across general engineering and precision workshop settings High resolution: 0.001 mm display Absolute measuring system for repeatability USB data output for traceable logs Supplied with ISO 17025 calibration Precise measurements that support reproducible decisions This instrument delivers a resolution of 0.001 mm and an accuracy of ±0.008 mm, making it suitable for detailed inspection tasks where reproducibility matters. The 0–100 mm measuring range covers typical component checks in production and maintenance, while the absolute measuring system ensures the zero reference remains stable after power cycles — a practical advantage for serial checks and automated data capture. The combination of tight resolution and a defined accuracy provides a clear, objective basis for pass/fail decisions in the workshop. Practical features for data-controlled inspection Equipped with a digital display offering mm/inch, PRESET, HOLD and MODE functions, this gauge simplifies routine measurements and reduces interpretation errors. The unit transmits readings via USB, enabling direct logging into spreadsheets or quality-control software and supporting traceability demands. Measurement force is specified at 3–5 N, a range that balances contact reliability with low deformation risk on sensitive parts. Power is supplied by a CR2032 3 V battery for compact, maintenance-light operation. The gauge is delivered fully calibrated to ISO 17025, including a calibration certificate for audit and acceptance procedures. Designed for shop-floor robustness and integration With an IP 80 protection rating and an absolute measuring system, the device resists common workshop influences while maintaining measurement integrity. The straightforward user interface and solid data output make the instrument a pragmatic choice for inspection benches, maintenance departments and small-series production where precise records are required. The gauge supports process standardisation: recorded readings can be used to monitor tool wear, verify setup, or feed statistical process control routines, reducing rework and downtime. Choose Microtech Metrology's calibrated digital dial gauge to strengthen inspection reliability—contact Metav Werkzeuge in Emmerich for technical advice, delivery options and integration support Technical data Article number: 120125904 GTIN: 4061905082023 Manufacturer: Microtech Metrology eCl@ss: 21170308 ETIM: EC003591 Numbers / core technical data Measuring range: 0–100 mm Resolution (display): 0.001 mm / 0.00005 in Accuracy: ±0.008 mm Measurement force: 3–5 N Power supply: CR2032 3 V Protection rating: IP 80 Data output: USB Designs / special features Absolute measuring system Digital display with mm/inch, PRESET, HOLD, MODE Supplied calibrated to ISO 17025 with certificate Suitable for workshop and inspection use FAQ Is the device supplied with a calibration certificate? Yes. The instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate for audit and quality assurance purposes. Can measurements be recorded digitally for traceability? The gauge provides a USB data output to transfer readings directly to a computer or data-logging system for traceable records and process monitoring. What is the typical battery and how long does it last? The unit uses a CR2032 3 V battery. Actual battery life depends on usage and backlight time but the type is chosen for compact, low-maintenance operation. Is the gauge suitable for routine shop-floor inspections? Yes. With a 0–100 mm range, robust IP 80 rating and 0.001 mm resolution, the instrument is designed for regular inspection tasks and integration into quality workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Dial Indicator Digital Colour Touchscreen, Wireless/USB, IP54, ISO 17025 - Microtech Metrology
Take advantage of the combination of laboratory-grade calibration, high-resolution measurement and wireless data transfer for reproducible results in precision work; order the device directly via Metav Werkzeuge or contact our consultants for application advice. Messuhr (Digital dial indicator) – Microtech Metrology, ISO 17025 calibrated, Wireless + USB The Messuhr is a compact electronic dial indicator for fine mechanical measurement tasks, offering a 0–100 mm measuring range suited to micro‑precision checks and workshop quality control. ISO 17025 calibration included Wireless and USB data output Colour 2.4" touchscreen display IP54 protection for workshop use High precision where micrometre accuracy matters The indicator delivers laboratory‑grade repeatability with an accuracy of ±0.0035 mm and a resolution of 0.0005 mm, making it suitable for demanding inspection tasks. These figures mean reproducible readings for small tolerances: the accuracy defines the maximum expected deviation from the true value, while the fine resolution shows even the smallest changes on the display. The low measuring force (1.3–2.0 N) helps to reduce deflection and surface indentation during contact, which is particularly important when assessing delicate components or thin materials. Faster data capture and fewer transcription errors Equipped with Wireless and USB data outputs and a colour 2.4" touchscreen display, the instrument simplifies data logging and integration into existing measurement routines. Wireless transfer shortens the path from measurement to digital record, reducing manual entry and the associated risk of errors, while USB provides a reliable wired option for direct downloads. The intuitive touchscreen speeds operation and shortens setup time, so inspection throughput improves without compromising traceability. Built and calibrated for workshop and lab use With an IP54 rating the unit tolerates everyday workshop dust and splashes, while its compact construction targets the Mikro class (0–100 mm) for extremely compact, high‑precision tasks such as watch components, micro‑mechanical parts and quality checks on small assemblies. The device is supplied fully calibrated to ISO 17025 and includes the calibration certificate, ensuring immediate use in accredited procedures or internal quality systems without additional calibration steps. Contact Metav Werkzeuge for a technical consultation and secure the Microtech Metrology Messuhr with ISO 17025 calibration and integrated Wireless + USB data transfer for your inspection bench Technical Data Article number: 120139908 GTIN: 4061905042102 Manufacturer: Microtech Metrology Facts Measuring range: 0–100 mm Resolution: 0.0005 mm Accuracy: ±0.0035 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Measuring force: 1.3–2.0 N Reversal span: 0.5 mm Protection class: IP54 Calibration: ISO 17025 certificate included Digital: yes eClass: 21170308 ETIM: EC003591 Special features Compact electronic dial indicator for micro‑precision Wireless data transmission and USB connection Colour touchscreen for quick operation Supplied calibrated to ISO 17025 with certificate Suited to workshop and laboratory environments Category: Messuhren FAQ What measuring range does this instrument cover? The instrument covers a measuring range of 0–100 mm, placing it in the micro class for fine mechanical measurements. Is the device supplied with a calibration certificate? Yes, the Messuhr is delivered fully calibrated to ISO 17025 and includes the calibration certificate for immediate use in accredited processes. How can measurement results be transferred to a computer? Measurement data can be transferred wirelessly or via USB for straightforward logging and integration into quality documentation. What protection does the housing provide against workshop conditions? The housing meets IP54, offering protection against dust ingress and water splashes common in workshop settings. What resolution and accuracy can be expected during inspection tasks? Expect a resolution of 0.0005 mm and an accuracy of approximately ±0.0035 mm, enabling sensitive detection of small dimensional deviations. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Dial Indicator With Tolerance Marks, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a large 60 mm dial, 0.01 mm resolution and an ISO 17025 calibration certificate for reliable, traceable inspection results; order the item directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Metrology Dial indicator — 60 mm dial, 0–100 mm range The dial indicator is a precision contact gauge designed for comparative measurements, run‑out checks and fine adjustment tasks in workshops and inspection benches. 60 mm dial for clear reading Resolution 0.01 mm standard Includes tolerance marks for quick checks Delivered with ISO 17025 calibration certificate Precise readings that support consistent production This instrument combines a large, easy‑to‑read 60 mm dial with a fine 0.01 mm graduation, enabling rapid, repeatable assessments on parts and setups. The mechanical design yields a reading habit close to traditional comparators but with modern resolution; the stated accuracy 0.04 mm gives a reliable error band for routine quality control. For production environments where time and reproducibility matter, the gauge reduces interpretation time and supports faster decision cycles by presenting clear numeric feedback rather than approximate visual checks. Built for inspection speed and everyday robustness The construction and scale layout are optimised for inspection workflows: the visible tolerance marks speed up go/no‑go decisions during batch checks and set‑up tasks, while the analogue display allows instant visual assessment without menu navigation. The compact footprint and mechanical drive make the device especially suitable for toolrooms and maintenance benches that require quick comparative checks, gauges for run‑out control and fast measurement of small features. The robust dial and pointer combination supports long service life under normal workshop conditions. Calibrated traceability and quality assurance Delivered fully calibrated under ISO 17025, the unit arrives with a traceable calibration certificate, ensuring measurement results can be traced back to national standards. This traceability simplifies incoming inspection records and audit requirements, and it demonstrates conformity for supplier quality control processes. The calibration status and documentation reduce qualification time for the gauge within production control systems and support procurement decisions where certified measurement capability is required. Contact Metav Werkzeuge for tailored technical advice and supply of the Microtech Metrology dial indicator (SKU 120121990) with ISO 17025 calibration certificate from Emmerich. Technical data Article number: 120121990 GTIN: 4061905451812 Manufacturer: Microtech Metrology Key figures Measuring range: 0–100 mm Dial diameter: 60 mm Resolution: 0.01 mm Accuracy: 0.04 mm Display type: analogue Special features Tolerance marks for fast visual checks Delivered with ISO 17025 calibration certificate Suitable for fine mechanical inspection and run‑out testing FAQ What resolution does the instrument provide? The Microtech Metrology dial indicator (SKU 120121990) offers a resolution of 0.01 mm for fine incremental readings. Is a calibration certificate supplied with the gauge? Yes — this unit is delivered fully calibrated according to ISO 17025 and includes the corresponding calibration certificate. For which tasks is this dial indicator best suited? The gauge is ideal for comparative measurements, run‑out checks and routine inspection tasks in workshops and toolrooms where clear, repeatable analogue indication is required. How do the tolerance marks help in daily inspection? Tolerance marks on the dial allow immediate go/no‑go evaluation without calculating limits, speeding up batch checks and set‑ups during production control. Is the device digital or analogue? This is an analogue dial instrument, chosen for quick visual assessment and robust operation in everyday workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Digital Indicator 0.01mm Resolution Absolute Output RB 6, Glass Scale, Supplied in Case - Metav IndustryLine
Precise inspection made straightforward: combine 0.01 mm resolution, ±0.02 mm accuracy and an absolute measuring system with RB 6 data output for reproducible results and faster traceability. Benefit from the glass-rail scale for stable readings and a compact 0–100 mm range that suits routine shop-floor checks. Order the digital dial gauge directly via Metav Werkzeuge or ask the consultants if further configuration is required. Digital dial gauge M301.024 — 0–100 mm, 0.01 mm resolution (Metav IndustryLine) Digital dial gauge M301.024 provides absolute‑system measurement and RB 6 data output for integration into inspection chains and test rigs Absolute measuring system with RB 6 output Resolution 0.01 mm with 0.02 mm accuracy Glass-rail scale for precise scanning Lightweight 0.5 kg for easy handling Reliable dimensional control through measurable precision The core benefit of this compact inspection instrument is its combination of 0.01 mm resolution and proven ±0.02 mm accuracy, which supports routine verification tasks and in‑process checks. The absolute measuring system retains origin without requiring re‑zeroing after power cycles, reducing setup time and the risk of offset errors. For operators and quality engineers, this translates into fewer measurement interruptions and a consistent basis for pass/fail decisions. The instrument’s measuring range 0–100 mm is ideal for bench‑level components and small assemblies where a balance of reach and stiffness is required. Data-ready operation for modern workflows Equipped with RB 6 data output, the device connects directly to data loggers and measurement networks, enabling automated capture of results and straightforward documentation. The integrated digital display with ON/OFF, ORIGIN, PRESET and mm/inch buttons simplifies format switching and reference setting on the fly. These features support traceable processes and quicker reporting, making the gauge an efficient component of a digital calibration loop or an automated inspection station. The absolute system and electronic interface reduce human transcription errors and speed up quality‑control throughput. Practical design that supports daily workshop use A glass‑rail scale ensures reliable optical scanning and contributes to stable, repeatable readings across many cycles. At approximately 0.5 kg, the instrument is light enough for handheld checks yet robust for fixed fixturing. The specified measuring force >1.2 N provides consistent contact behaviour, helping to limit variation caused by differing applied pressure. Controls are arranged for straightforward operation and the compact form factor assists access to confined measuring positions, which is beneficial during machine set‑up or component inspection. Where the gauge adds value on the shop floor This device is suited to routine dimensional control, incoming inspection and machine set‑up where rapid, repeatable results and digital traceability matter. Typical applications include small parts inspection, toolroom checks and comparative measurements in production lines. The combination of an absolute encoder, fine resolution and direct data output is particularly valuable when measurement results feed automated statistics or SPC systems. Maintenance requirements are low; the electronic system eliminates mechanical backlash common to traditional indicators, improving longevity under regular use. For integration advice or to request the Metav IndustryLine digital dial gauge with RB 6 output and tailored measuring-chain recommendations, contact Metav Werkzeuge for expert guidance and order support Technical data Article number: M301.024 GTIN: 4054469168913 Manufacturer: Metav IndustryLine Customs tariff number: 90318020 eClass: 21170308 ETIM: EC003591 Measurements and performance Measuring range: 0–100 mm Resolution (display): 0.01 mm Accuracy: ±0.02 mm Measuring force: >1.2 N Weight: 0.5 kg Power supply: 3 V Features and materials Absolute measuring system Data output: RB 6 Digital display with ON/OFF, ORIGIN, PRESET, mm/inch Scale with glass rail for precise scanning Category: dial gauges (messuhren) Intended use: dimensional inspection, machine set‑up, in‑process checks FAQ What measurement range does the gauge cover? The gauge covers a measuring range of 0–100 mm, suitable for small components and shop‑floor checks with the M301.024 digital dial gauge. How accurate and precise is the instrument? The instrument offers a resolution of 0.01 mm and an accuracy of ±0.02 mm, providing reliable repeatability for routine inspection tasks. Can measurement data be exported for documentation? Yes, the device features an RB 6 data output for direct connection to data loggers or measurement chains for automated documentation. Is the display able to switch units? The digital display includes a mm/inch button so readings can be toggled between metric and imperial without additional conversion. What type of scale does the instrument use for scanning? The measuring device uses a glass‑rail scale for more accurate optical scanning and improved repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Extension Rod For Dial Gauges 4mm Probe Diameter - Käfer Messuhrenfabrik GmbH & Co. KG
Benefit from a precise 100 mm extension and a 4 mm measuring pin for reliable access to recessed features; combine simple mounting with Käfer quality for consistent contact measurement. Order the extension rod directly via Metav Werkzeuge or ask the consultants for compatibility advice. Extension Rod L 100 mm – 4 mm Measuring Pin for Dial Indicators (Käfer) The Extension Rod L 100 mm is an accessory piece that extends the reach of dial indicators, providing a 4 mm measuring pin for precise contact measurement in confined or recessed areas. Extension rod 100 mm length Measuring pin diameter 4 mm Compatible with dial indicators Reach recessed features with maintained measurement quality The 100 mm extension increases the working range of a dial indicator while preserving the contact geometry required for accurate readings. By adding a measured length between the indicator spindle and the contact point, the accessory enables inspections in blind holes, deep grooves and assemblies where direct access is restricted. The 4 mm pin diameter provides a standard contact footprint that is widely accepted across gauge tips and probes, supporting repeatable positioning and stable contact during measurement cycles. Simple integration into metrology workflows Designed as an accessory for dial indicators, this extension piece allows straightforward assembly without complex adapters. The geometry is intended to maintain alignment and reduce lateral deflection during contact, which supports consistent results in production checks and setup routines. For workshop environments where tool changeover speed matters, the plug-and-play nature of the extension reduces downtime and supports faster part inspection sequences, contributing directly to operational efficiency and throughput. Reliability and confidence for routine inspection tasks Supplied as a single unit and matching standard metrology practice, the extension rod supports a disciplined inspection regime by enabling measurements that would otherwise require repositioning parts or instruments. The clear specification of 100 mm length and 4 mm measuring pin diameter makes it simple to document measurement setups and trace inspection steps. When combined with established dial indicators, the accessory helps maintain traceability and repeatability — key factors for quality control in workshops and small production lines. For precise reach and dependable contact measurement with the Käfer extension rod, contact Metav Werkzeuge in Emmerich for ordering or technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 4000851692NW Product type: Extension rod Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Packaging unit: 1 Facts Length: 100 mm Measuring pin diameter: 4 mm Special features For dial indicators Extension pieces for dial indicators Intended for contact measurements in recessed areas FAQ What is the primary purpose of this extension rod? The extension rod extends the reach of a dial indicator so that contact measurements can be taken in recessed or hard-to-access areas without repositioning the workpiece. Which indicators are compatible with this accessory? Compatibility is with standard dial indicators that accept a 4 mm contact pin interface; the Käfer extension rod matches common spindle and tip geometries used in workshop metrology. How does the 4 mm measuring pin influence measurement behaviour? A 4 mm pin provides a stable contact surface that balances access and repeatability; the specified diameter supports consistent contact force distribution for reliable readings with the appropriate gauge tip. Can the extension rod be used for traceable inspection procedures? Yes, the clear specification of 100 mm length and 4 mm pin diameter allows documentation within inspection plans and supports repeatable setups; the SKU 4000851692NW can be recorded in measurement records for traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Probe Gauge Digital Touchscreen With 2m Cable ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable measurement results and quick data capture: the compact probe combines ±0.005 mm accuracy and wireless + USB data output, and is delivered fully calibrated to ISO 17025. Order the Messtaster directly via Metav Werkzeuge or ask our consultants if needed. Messtaster — digital measuring probe, 0–100 mm range, Microtech Metrology The Messtaster is a compact digital measuring probe for precision inspection in workshop and laboratory environments, offering integrated wireless and USB data transfer and a colour touchscreen for straightforward readout. High accuracy ±0.005 mm Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Consistent results for quality control and production A focused design delivers repeatable measurements where they matter most: production checks and first-article inspection. The instrument’s accuracy (±0.005 mm) and fine display resolution support tight tolerances, reducing scrap and rework. Because the unit is calibrated to ISO 17025, measurement results can be referenced in formal quality documentation; this traceability simplifies audits and supplier qualification. The compact form factor and defined measurement range make the probe suitable for bench inspection and inline control. Fast data capture that integrates with inspection workflows Data transfer options speed up documentation and eliminate transcription errors: both wireless and USB outputs are available for direct connection to inspection software or data loggers. The 2.4" touchscreen provides an immediate, readable interface for quick set-up and live readings, while the digital output enables batch export and statistical process control. These capabilities shorten measuring cycles and support lean workflows, so inspection becomes an integrated, value-adding step rather than a bottleneck. Robust handling for routine workshop use Built for everyday use, the probe combines a responsive digital display with practical hardware details such as a 2 m cable for flexible positioning and a durable casing designed for workshop environments. The device’s compact footprint and intuitive controls reduce operator fatigue and training time, so measurement tasks are completed reliably and efficiently. Delivered with a formal calibration certificate, the instrument provides both immediate usability and long-term confidence in measurement integrity. For specification advice, calibration documentation or to order through Metav Werkzeuge in Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for personalised guidance and delivery details Technical data Article number: 120129907L GTIN: 4061905042928 Brand: Microtech Metrology Facts Measuring range: 0–100 mm Resolution: 0.0001 mm Accuracy: ±0.005 mm Display: 2.4" colour touchscreen Special features Data output: Wireless + USB Delivered calibrated: ISO 17025 certificate included Colour 2.4" touchscreen display 2 m cable included Digital measuring probe, category: Messuhren FAQ Is the device supplied with a calibration certificate? Yes. The Messtaster from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceable quality records. What is the effective measuring range and resolution? The instrument covers a measuring range of 0–100 mm with a display resolution of 0.0001 mm, suitable for precision inspection tasks where sub‑hundredth millimetre detail is required. How is measurement data exported? Data can be exported via the unit’s wireless interface or through USB, enabling direct integration with inspection software and data collection systems for automated logging. Can the probe be used on a shop floor or only in a laboratory? The probe is designed for workshop use as well as laboratory inspection: it features a durable enclosure, a practical 2 m cable, and an easy-to-read touchscreen for robust everyday operation. Which SKU should be referenced when ordering or requesting documentation? Please refer to SKU 120129907L when ordering or requesting the calibration certificate and technical documentation for this Microtech Metrology probe. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
105mm Small Magnetic Indicator Stand Central Clamp, Permanent Base 10 kg - Metav IndustryLine
Take advantage of a compact, 10 kg holding capacity and a central force clamp to secure fine measurement probes reliably; order directly via Metav Werkzeuge or consult the specialists for application advice. Magnet-Messstativ M208.111.1 — Small magnetic stand with central force clamp, 10 kg permanent base (Metav IndustryLine) The Magnet-Messstativ M208.111.1 is a compact magnetic measurement stand designed for stable positioning of dial test indicators and fine probes in workshop and inspection environments Compact magnetic stand with small footprint Central force clamp for axial locking 10 kg magnetic holding capacity Suitable for dovetail-mounted indicators Stable support that reduces measurement variability The magnetic base delivers a consistently strong hold, with a rated 10 kg magnetic force that secures the stand to ferrous surfaces and minimises slippage during inspection. Coupled with the central force clamp, the clamping action converts operator rotation into a uniform axial lock, which reduces torque-induced displacement and improves repeatability. Built for precision tasks, this configuration keeps the probe steady so that readings remain stable even during fine adjustments, supporting faster and more reliable quality checks. Small footprint and fast setup for busy benches A deliberately compact construction and low mass (approx. 0.25 kg) make the instrument easy to position and reconfigure across multiple machines and measuring stations. The base accepts an Ø35x35, M4 mounting interface, enabling straightforward attachment to stands, posts or ancillary fixtures. Compatibility with dovetail-mounted indicators ensures that standard dial test indicators and fine contact probes can be deployed without additional adapters, reducing setup time and simplifying routine inspection workflows in production and maintenance. Universal utility across workshop inspection tasks Classified as a universal magnetic stand, the unit is suitable for a wide range of measurement and clamping applications where a reliable reference is required. The permanent magnetic base provides maintenance-free holding compared with electromagnet solutions, while the robust clamp mechanism delivers secure locking without complex adjustments. This combination supports repeatable inspection of components and rapid transfer between jobs, making the item a pragmatic choice for machine shops, toolrooms and inspection benches that need efficient, dependable positioning. Contact Metav Werkzeuge in Emmerich for tailored advice or to reserve the compact magnetic stand M208.111.1; local stock and expert guidance are available by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M208.111.1 GTIN: 4054469159461 eClass: 21170601 Manufacturer: Metav IndustryLine Facts Magnetic force: 10 kg Weight: 0.25 kg Foot: Ø35x35, M4 Tariff number: 90319000 Special features Permanent magnetic base Central force clamp Universal application Suitable for dial test indicators with dovetail mounting Category: Magnet stands FAQ What holding capacity does the magnetic stand provide? The magnetic stand offers a holding force of 10 kg, giving reliable fixation for typical inspection setups with dial indicators and small probes. Is the clamping mechanism suitable for delicate probes? Yes, the central force clamp provides axial locking with uniform pressure, which helps protect delicate fine probes and maintains stable positioning. Which indicators are compatible with the stand? Compatibility is provided for indicators and probes using a dovetail mounting; this allows common dial test indicators to be mounted directly. What is the mounting interface on the base? The base features an Ø35x35 mounting interface with an M4 thread, enabling straightforward attachment to posts and fixtures. Is the magnetic base permanent or switchable? The base is a permanent magnetic type, offering maintenance-free holding without the need for a power source. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Ball Probe, Thread M2.5 For Dial Indicator - Metav IndustryLine
Take advantage of the combination of compact design and straightforward compatibility for consistent surface probing results; order the accessory directly via Metav Werkzeuge or contact our consultants for application advice. Measuring tip M208.173 — Ball Ø10 mm, Thread M2.5 for Dial Gauges (Metav IndustryLine) A Measuring tip M208.173 designed as a 10 mm spherical contact with an M2.5 threaded mount for precise probing on dial indicators across workshop and inspection tasks. 10 mm spherical contact tip M2.5 threaded fitting for dial gauges Lightweight: 0.1 kg Precise contact geometry for more reliable readings The 10 mm ball contact provides a defined, repeatable point of engagement that reduces local surface deformation and yields consistent probe behaviour when checking profiles or resting measurements. As a dedicated measuring tip, this geometry minimises lateral ambiguity at the contact point and supports stable readings on curved or flat surfaces alike. The result is improved precision and enhanced repeatability in routine inspection tasks, making the component suitable as a reliable accessory in a standard metrology toolkit. Simple mounting and compact form that fits restricted areas Fitted with an M2.5 thread, the tip is compatible with dial indicators that accept this common mounting size, allowing quick replacement or configuration changes without special adapters. The compact contact head and lightweight construction make it easy to integrate into confined setups, where bulkier probes would obstruct access. This straightforward interface reduces downtime during tool changes and helps maintain measurement flow in production or maintenance environments. Practical integration into inspection routines and stock management As an accessories item for dial gauges, the component supports modular measurement strategies: swap the probe to suit varying surface types or reach requirements, keeping a small inventory of contact heads for fast adaptation. The compact nature and clear specification simplify storage and procurement documentation, while the defined contact geometry assists quality teams in creating repeatable test plans. For suppliers and workshops seeking predictable probe behaviour, this accessory provides a simple, focused solution that complements existing indicator fleets. Contact Metav Werkzeuge for matching dial gauge accessories or request specialist advice on the Metav IndustryLine measuring tip M208.173 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M208.173 GTIN: 4054469105239 Eclass: 21170324 Weight: 0.1 kg Tariff number: 90319000 Facts Ball diameter: 10 mm Thread: M2.5 Suitable for: dial gauges with M2.5 mounting Special features Accessory for measurement devices Category: Accessories (measurement equipment) Label: Measuring tip for dial gauge, ball 10 mm, thread 2.5 mm FAQ Is this tip compatible with all dial indicators? Compatibility is determined by the mounting thread; the measuring tip M208.173 fits dial indicators that accept an M2.5 threaded contact. What is the contact geometry and why does it matter? The 10 mm spherical contact on the M208.173 provides a defined point of contact that improves measurement repeatability and reduces local surface deformation during probing. Can the tip be used for measurements in tight or recessed areas? Yes, the compact head and lightweight nature make the tip suitable for restricted spaces where larger probes would not fit. How should the tip be stored or inventoried for workshop use? Keep the tip with other dial gauge accessories in a dedicated compartment or drawer, labelled by article number M208.173, to enable quick selection and reduce setup time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Ball Tip Dial Gauge Contact, M2.5 Threaded Shank - Metav IndustryLine
Take advantage of the spherical 10 mm contact geometry and the universally compatible M2.5 thread to ensure reliable, repeatable contact for dial gauge measurements; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. M208.161 – Spherical contact tip for dial gauge, Ø10 mm, M2.5 thread (Metav IndustryLine) The M208.161 is a spherical measuring insert designed for dial gauges with an M2.5 connection, delivering stable point contact for workshop and inspection tasks. Spherical contact tip Ø10 mm Fits dial gauges with M2.5 thread Precision accessory for repeatable readings Compact design for confined measuring spaces Reliable point contact for consistent results The spherical contact tip provides a defined point of contact that reduces surface abrasion and helps maintain a consistent measurement reference, which is essential when comparing repeat measurements. With a Ø10 mm geometry, the insert concentrates contact forces reliably without large contact-area variability, improving repeatability on slightly curved or uneven workpiece surfaces. This mechanical simplicity supports efficient throughput in quality control routines while keeping measurement uncertainty low. Simple compatibility and fast replacement Designed for dial gauges with an M2.5 connection, the insert is straightforward to fit and replace, minimising downtime during inspection cycles. The compact form factor suits confined measuring positions and fixtures where larger probes would obstruct access. Its low mass contributes to minimal influence on the indicator’s moving system, preserving the instrument’s responsiveness and ensuring stable pointer behaviour during both static and light dynamic checks. Practical benefits across workshop and inspection use As an accessory for precision measuring instruments, this insert enhances everyday metrology tasks by enabling reliable contact on small features, radii and step measurements. The component supports a structured measurement workflow: quick exchangeability reduces setup time, the spherical tip aids alignment on rounded edges, and the rugged, no-frills design fits established inspection processes. Use with standard dial gauges in machine shops, toolrooms and incoming inspection to raise the consistency of comparative checks. For compatibility confirmation or to order the Metav IndustryLine M208.161 spherical contact tip (Ø10 mm, M2.5), contact Metav Werkzeuge today and discuss application requirements with our specialists Technical Data Article number: M208.161 SKU: M208.161 GTIN: 4054469105130 ECLASS: 21170324 Tariff number: 90319000 Category: Accessories (Measuring instruments) Facts Weight: 0.1 kg Contact diameter: Ø10 mm Thread: M2.5 Suitable for dial gauges with M2.5 connection Special features Spherical contact tip for defined point contact Compact design for confined measuring spaces Precision accessory for repeatable readings Accessory for dial indicators / dial gauges Story trigger: accessory FAQ What thread does this contact tip use? The M208.161 contact tip uses an M2.5 thread and is intended for dial gauges with an M2.5 connection. What is the contact diameter of the insert? The contact geometry has a Ø10 mm spherical tip, which is specified for consistent point contact. Can the insert be used on slightly curved surfaces? Yes, the spherical shape of the M208.161 improves alignment on small radii and slightly curved workpiece areas, supporting repeatable measurements. Is the accessory suitable for tight measuring positions? The compact design makes the insert well suited to confined spaces and fixtures where larger probes would be impractical. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Convex Measuring Insert Radius 15 Steel For Dial Gauges - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of a compact solution that combines repeatable contact geometry and robust steel construction to secure consistent measurement results; the convex contact face and M2.5 thread ensure stable mounting and long service life. Order the measuring insert directly via Metav Werkzeuge or consult Metav’s specialists for application-specific advice. Measuring contact insert, Ø 10 mm — convex R15, M2.5 thread (Käfer) A measuring contact insert Ø 10 mm, convex R15, M2.5 designed for secure, repeatable contact with dial indicators in precision workshops and inspection stations. Convex contact R15 for stable engagement Threaded M2.5 for secure attachment Solid steel body for wear resistance Compatible with dial indicators for precision checks Consistent contact geometry for reliable results The convex contact geometry, featuring a radius of 15 mm (R15) and a contact diameter of Ø 10 mm, provides a defined contact point that reduces measurement variability. In production environments where cycle-to-cycle consistency matters, the shaped contact face minimises point loading and helps maintain repeatability when used with standard dial indicators. The geometry is explained so that users unfamiliar with contact-tip theory understand that a convex face spreads contact over a controlled area, which lowers local stress and gives more stable readings than a sharply pointed tip. Robust steel construction that withstands workshop use Manufactured in steel, the insert offers high wear resistance and dimensional stability under normal inspection loads. The choice of material means the part resists deformation during repeated contact, which preserves calibration intervals and reduces downtime for replacements. The item’s M2.5 thread ensures a secure mechanical connection to the indicator stem, so the contact tip remains firmly seated during tactile checks and light probing. Where traceable, repeatable measurements are required, a durable contact insert reduces the need for frequent replacements and keeps inspection routines efficient. Practical compatibility and easy integration Supplied as a compact measuring insert for dial indicators, the component integrates directly into common indicator stems via its M2.5 thread, eliminating the need for adapters in many setups. The simple geometry and standard thread size mean the insert can be used across a range of workshop and quality-control tasks, from component spot checks to fixture-based inspection. For applications where the workpiece surface varies, the convex tip assists in maintaining a stable point of contact even on slightly curved surfaces. If additional technical details are required to confirm suitability for a specific measurement task, Metav’s technical advisors are available to help with exact specifications and compatibility queries. Contact Metav Werkzeuge for tailored advice and to order this Käfer measuring insert through Metav Werkzeuge GmbH — phone +49 2822 7131930 or email info@metav-werkzeuge.com for application support and supply from Emmerich Technical data Article number: 4000851638NW UID: 4000851638NW Label: Messeins.D.10mm gewölbt R.15 M2,5 STA z.Messuhren KÄFER Facts Diameter: 10 mm Contact radius: 15 mm Thread: M2.5 Material: Steel Packaging unit: 1 Special features Convex contact geometry (R15) Designed for use with dial indicators Käfer Messuhrenfabrik GmbH & Co. KG brand FAQ What is the contact diameter of this measuring insert? The measuring insert has a contact diameter of 10 mm and a convex face with R15, making it suitable for repeatable contact measurements with dial indicators. Which thread is used to attach the tip to an indicator? Attachment is via an M2.5 thread; the insert is designed for secure mounting on stems that accept M2.5 connections. Is the insert suitable for heavy-duty or abrasive measurement tasks? The insert is made from steel, offering good wear resistance for normal inspection work; for highly abrasive or specialised environments, consult Metav for recommendations. Can this insert be used on curved workpiece surfaces? Yes — the convex R15 contact geometry helps maintain stable engagement on slightly curved or uneven surfaces when used with a dial indicator. What is the SKU for reordering or reference? The SKU for this Käfer measuring insert is 4000851638NW, which should be quoted when reordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Depth Gauge Set With 0.01mm Dial Indicator And Extensions 10/20/40/70/100mm, Factory Standard - Metav IndustryLine
Achieve reliable depth measurement with a finely graduated dial indicator (0.01 mm) and a sturdy 100 x 16 mm measuring bridge; the included extension rods provide flexible reach up to 120 mm messtiefe. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. Depth dial gauge set M208.060.2 — 0–10 mm range, 0.01 mm graduation (analogue) The Depth dial gauge set M208.060.2 is a precision instrument for repeatable depth measurements in workshop inspection, toolmaking and assembly tasks 0.01 mm resolution dial indicator 100 x 16 mm measuring bridge Five extension rods: 10–100 mm Robust metal housing with tolerance marks Repeatable, measurable precision for inspection tasks The set centres on an analogue dial indicator with a 0–10 mm measuring range and 0.01 mm graduation, delivering clear, incremental readings suitable for routine quality control. The mechanical dial provides immediate visual feedback without battery dependence, making the system reliable in production environments. The graduated scale and defined increments support rapid decision-making on the shop floor, while the solid contact tip transmits motion precisely to the indicator for reproducible results. This configuration is aimed at users who prioritise consistent, traceable depth checks over electronic features. Flexible reach for varied components and assembly work A compact 100 x 16 mm measuring bridge serves as the stable reference for depth measurements, while the set of five extension rods (10, 20, 40, 70 and 100 mm) expands the effective reach to a maximum messtiefe of 120 mm. This modular approach allows measurement of shallow recesses and deeper bores without changing the basic measuring principle, reducing setup time and potential alignment errors. The extensions screw to the contact stem, preserving axial alignment and ensuring that the displayed travel on the dial corresponds directly to the workpiece depth. Robust build quality for everyday workshop use Constructed with a metal housing with tolerance marks, the instrument is built to withstand regular handling in industrial environments; the tolerance marks aid repeat settings and visual checks. At 0.62 kg the set balances solidity with manoeuvrability on benches and in inspection rigs. The unit conforms to the supplier’s factory standard (Werksnorm), providing a predictable baseline for in-house quality procedures. Wherever stability and simple, mechanical reliability are required, this depth gauge set delivers a pragmatic combination of durability and usability. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine depth gauge set and to arrange supply from our Emmerich facility Technical data Article number: M208.060.2 GTIN: 4054469168111 Manufacturer: Metav IndustryLine Facts Measuring range: 0–10 mm Resolution / Graduation: 0.01 mm Measuring depth (with extensions): 120 mm Bridge dimensions: 100 x 16 mm Extension rods: 10 mm, 20 mm, 40 mm, 70 mm, 100 mm Weight: 0.62 kg Special features Analogue dial indicator Metal housing with tolerance marks Werksnorm (factory standard) eClass: EC003591 ETIM: 21170308 Customs tariff number: 90178090 FAQ What measuring range does the depth gauge cover? The depth gauge provides a 0–10 mm measuring range on the dial, with extended reach achieved using the supplied extension rods for deeper tasks. How deep can measurements be taken with the supplied extensions? With the bridge and the five extension rods (10, 20, 40, 70 and 100 mm) assembled as recommended, the instrument attains a practical measuring depth of up to 120 mm. What is the resolution and how is the value read? The dial indicator has a 0.01 mm graduation; the analogue dial shows increments directly, enabling quick visual checks without electronic display dependency. Are the extension rods included in the delivery? Yes, the set includes extension rods of 10, 20, 40, 70 and 100 mm to provide flexible measuring options for varied components. Is the instrument suitable for shop-floor quality control? The Metav IndustryLine depth gauge set M208.060.2 is designed for repeatable shop-floor depth checks, offering robust mechanical construction and clear graduations for routine inspection work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Depth Gauge Set With 10×0.01mm Dial Indicator, Extensions 10/20/40/70/100mm, Metal Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm resolution, modular extensions up to 120 mm measuring depth and a robust metal housing for repeatable depth checks in the workshop; order the Depth Gauge Set M208.060.1 directly via Metav Werkzeuge or ask our consultants if needed. Depth Gauge Set M208.060.1 – Analogue dial indicator, 10 mm range, 63 × 16 mm bridge (Metav IndustryLine) A Depth Gauge Set M208.060.1 designed for precise depth and comparative measurements in machining and inspection applications, supplied with a compact measuring bridge and five modular extensions. Analogue dial with 0.01 mm resolution 63 × 16 mm measuring bridge Extension set up to 120 mm reach Metal housing with tolerance marks Workshop standard (Werksnorm) ready Precision where small depths matter The set centres on an analogue dial indicator with a 10 mm range and a fine 0.01 mm graduation, delivering a clear, mechanical readout for repeatable checks. Classified in the micro range for depth gauges, the design supports fine mechanical work where small depth differences are decisive. The compact 63 × 16 mm bridge keeps the measuring geometry rigid and minimises deflection, which translates into reliable comparative readings on small parts such as recesses, bores and precision components. Extendable reach for versatile depth checks Five supplied extensions (10, 20, 40, 70 and 100 mm) provide staged reach options that combine to a maximum practical measuring depth of 120 mm, enabling inspection of deeper cavities without compromising stability. The modular concept allows the set to be configured for short, accurate checks or extended reach tasks by stacking extensions in sequence. This flexibility reduces the need for multiple dedicated gauges and supports a range of workshop and inspection scenarios. Robust construction for routine workshop use A metal housing with tolerance marks and a solid mechanical dial movement provide long-term resilience in everyday use. The construction balances low mass with stiffness to keep the instrument stable during measurement, while the analogue format offers robustness where electronic systems may be unnecessary. Supplied to Werksnorm, the set fits routine quality control procedures and is easy to integrate into standard inspection workflows. For precise depth measurement tasks and tailored advice, contact Metav Werkzeuge in Emmerich — Metav IndustryLine specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M208.060.1 GTIN: 4054469168104 Manufacturer: Metav IndustryLine SKU: M208.060.1 Facts Measuring range: 0–10 mm Resolution: 0.01 mm Measuring depth: 120 mm Bridge size: 63 × 16 mm Weight: 0.62 kg Special features Analogue dial indicator Metal housing with tolerance marks Extensions: 10, 20, 40, 70, 100 mm Werksnorm Category: Dial indicators FAQ What measurement resolution does the set provide? The Depth Gauge Set M208.060.1 features an analogue dial with a 0.01 mm graduation, offering clear incremental readings for workshop and inspection tasks. How deep can the set measure with the supplied extensions? Using the included extensions (10, 20, 40, 70, 100 mm) the set provides a practical measuring depth of up to 120 mm for deeper cavities and bores. Is this instrument suitable for fine mechanical components? Yes. The set is classified in the micro range for depth gauges (0–10 mm) and the rigid 63 × 16 mm bridge makes it appropriate for fine mechanical and small-part measurements. Does the set come with a calibration certificate? The Depth Gauge Set M208.060.1 is supplied to Werksnorm; no ISO 17025 statement is provided in the product data, so only the factory norm applies unless otherwise specified. What materials and durability features are included? The instrument has a metal housing with tolerance marks and a mechanically driven dial, designed for workshop durability and repeatable use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Depth Gauge Set With 16mm Stem Dial Indicator 0.01mm Resolution, Extensions 10/20/40/70/100mm Werksnorm - Metav IndustryLine
Take advantage of the compact Ø16 mm stem, the 0.01 mm resolution and the modular extension rods that extend measuring reach to 120 mm; this combination delivers precise depth measurement for fine mechanical and workshop inspection tasks. Order this depth dial gauge set directly via Metav Werkzeuge or consult our specialists if required. Metav IndustryLine Depth Dial Gauge Set M208.060.3 – Ø16 mm stem, 10 mm range (0.01 mm) A Depth Dial Gauge Set M208.060.3 designed for high‑precision depth checks and step measurements in fine mechanical, toolroom and workshop metrology. Ø16 mm stem for narrow bores and round stops 0.01 mm dial resolution for fine indication Extension rods 10, 20, 40, 70 and 100 mm Metal housing with tolerance marks Accurate depth readings for fine mechanical work The set centres on a 10 mm range dial indicator with a 0.01 mm graduation, delivering clear and repeatable readings for small depth tasks. Classified in the Micro range (max. 10 mm), the instrument is tailored to precision work such as watchmaking, valve‑seat inspection and small bores where short, torsion‑resistant stems improve stability. The analogue display keeps the indication simple and direct, while the metal housing with integrated tolerance marks helps to spot deviations at a glance, reducing inspection time without compromising reliability. Modular reach and practical measuring depth A system of five supplied extension rods (10, 20, 40, 70 and 100 mm) provides staged reach so that a single indicator covers a wide span of depth tasks up to the specified measuring depth of 120 mm. The Ø16 mm stem is compatible with round stops and depth bridges commonly used in bench fixtures, allowing quick conversion between short‑range and extended checks. The modular approach lowers tool inventory and speeds up process checks, which in turn reduces setup time and the likelihood of measurement errors during repetitive inspection cycles. Robust, workshop‑ready construction Built for everyday use in production and toolrooms, the instrument features a sturdy metal body and a balanced feel that supports consistent contact pressure during measurement. The dial's mechanical design provides tactile feedback for controlled probing, and the set’s overall weight is well matched to handheld operation. Supplied to factory standard (Werksnorm), the set is engineered for a long service life under standard workshop conditions, combining durability with measurement transparency through its marked housing. Streamlined inspection workflow and application fit Integrating this depth indicator into incoming inspection, in‑process checks and final verification reduces rework and shortens throughput times by enabling fast, trustworthy depth assessment at the bench. The analogue dial is ideal where a visual, immediate readout suffices; the modular rod set makes the instrument versatile across assembly, maintenance and quality‑control tasks. For operations seeking a compact, reliable depth measurement tool that complements existing gauges and fixtures, this set provides a pragmatic balance of precision and practicality. For technical advice or to secure this Metav IndustryLine depth gauge set, contact Metav Werkzeuge in Emmerich by phone or e‑mail and discuss compatibility with current inspection routines. Technical data Article number: M208.060.3 GTIN: 4054469168180 Manufacturer: Metav IndustryLine Facts Measuring range: 0–10 mm Resolution: 0.01 mm Measuring depth: 120 mm Stem diameter: Ø16 mm Weight: 0.62 kg Special features Extensions: 10, 20, 40, 70, 100 mm Metal housing with tolerance marks Analog dial indicator, Werksnorm Classification: Micro (max. 10 mm) FAQ Is the set delivered with extension rods? Yes. The depth dial gauge set M208.060.3 is supplied with extension rods of 10, 20, 40, 70 and 100 mm to extend reach up to the 120 mm measuring depth. What is the resolution and suitable applications? The indicator offers a 0.01 mm resolution, making the set suitable for fine mechanical tasks, toolroom checks and workshop inspection where sub‑hundredth millimetre indication is required. Does the instrument require special calibration on delivery? The set is supplied to factory standard (Werksnorm). If a specific accredited calibration is needed, please specify requirements when ordering; the standard delivery follows the stated Werksnorm. Can the stem be used with depth bridges or round stops? Yes. The Ø16 mm stem is intended for use with round stops and depth bridges commonly used in bench fixtures, enabling stable measurements in narrow bores and stepped features. Is the display digital or analogue and are data outputs available? The device is an analogue dial indicator; there is no integrated digital data output included with this set. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Gauge 0.01mm Resolution With Shock Protector, 58mm Bezel - TECWERK
Take advantage of precise measurement and robust workshop protection with a compact, DIN‑compliant instrument: 0.01 mm readability and shock protection combine to reduce inspection time and rework. Order the instrument directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Dial indicator DIN 878 — 10 mm, 0.01 mm graduation, shock‑protected (TECWERK) Dial indicator DIN 878 — 10 mm range, 0.01 mm graduation, shock protection is designed for workshop measurement and quality control tasks DIN 878 standardised dial indicator 10 mm measuring range, 0.01 mm graduation Shock-protected design for workshop use 58 mm dial, 1.0 mm per revolution Precise readings that reduce rework and speed inspection The instrument delivers high‑precision measurement through a fine 0.01 mm graduation across a 10 mm measuring span. The clear, large 58 mm dial and the 1.0 mm hand rotation per revolution allow rapid interpretation of displacement while maintaining traceable results. For production environments where dimensional tolerances are tight, the combination of micro‑graduation and standard conformity (DIN 878) translates into fewer rejected parts and shorter inspection cycles, supporting a more efficient quality workflow. Robust design for everyday workshop demands Built with shock protection, the indicator tolerates the knocks and vibrations common at the bench without immediate loss of calibration, which extends service intervals and reduces downtime. The construction focuses on durability while keeping the instrument compact for handheld use or fixture mounting. The robust layout safeguards delicate internal components so that routine handling in metalworking and inspection areas does not compromise long‑term repeatability. Practical integration and measurable benefits in process control Fitting easily into existing inspection jigs, the instrument supplies reliable scalar displacement values for go/no‑go checks and setup tasks. The straightforward mechanical readout requires no software integration, which simplifies operator training and keeps measurement data immediately actionable. By providing consistent analogue feedback with a fine resolution, the device helps to verify setups quickly and to confirm corrective actions, delivering measurable time savings in cycle preparation and first‑article verification. Expert support and procurement from a focused supplier Metav combines broad product choice with direct logistical control from Emmerich, making specialist metrology tools accessible to workshops and trade customers. The availability of extensive product ranges and an experienced purchasing partner ensure dependable supply and an informed buying process. If additional technical specifications are required for machine‑integration or inspection planning, the technical team is able to provide clarifications and complementary data. Contact Metav Werkzeuge in Emmerich for availability, delivery options and technical advice on the TECWERK dial indicator; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000851511NW Product type: Dial indicator Brand: TECWERK Packaging unit: 1 Facts Measuring range: 10 mm Graduation/readability: 0.01 mm Dial diameter: 58 mm 1.0 mm per pointer revolution Special features DIN 878 compliant With shock protection Mechanical analogue display Compact workshop format FAQ What level of accuracy does this dial indicator provide? The TECWERK dial indicator (dial indicator DIN 878, SKU 2000851511NW) has a graduation of 0.01 mm, providing fine resolution suitable for typical workshop inspection and setup tasks. Is the instrument suitable for routine workshop use? Yes — the instrument is supplied with shock protection, which increases resilience against typical knocks and handling in a workshop environment while preserving measurement repeatability. How large is the dial and how is the scale arranged? The dial has an outer diameter of 58 mm and the pointer makes 1.0 mm per revolution, enabling quick visual assessment and straightforward reading of small displacements. Does the indicator conform to recognised standards? This device is produced to DIN 878 specifications, ensuring standardised dimensions and functional behaviour expected for precision dial indicators. Can it be integrated into existing inspection fixtures? The compact mechanical format and standardised mounting interfaces make the indicator suitable for integration into jigs and fixtures for comparative and setting operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
10mm Dial Gauge Insert Flat M2.5 Steel - Käfer Messuhrenfabrik GmbH & Co. KG
Benefit from robust steel construction, a flat 10 mm contact face and a standard M2.5 mounting that ensure repeatable dial gauge readings; order the measuring insert directly via Metav Werkzeuge or consult our specialists for application advice. Käfer measuring insert, flat Ø 10 mm, M2.5, steel The Käfer measuring insert is a flat contact accessory for dial gauges, offering a 10 mm contact face and an M2.5 thread for straightforward mounting in precision measurement setups. Flat 10 mm contact face M2.5 thread mount for dial gauges Designed for dial gauge use Steel construction for stability Reliable contact face for repeatable readings A flat contact face with a 10 mm diameter delivers a consistent contact area that reduces measurement variability on flat surfaces. The flat geometry is preferable where point contacts would deform or slip, so the insert supports repeatability and stable reference points. The precisely machined surface minimises measurement noise and helps to maintain instrument calibration intervals. Easy compatibility and secure mounting With a standard M2.5 thread, the insert fits common dial gauge accessories and holders used across workshops and inspection benches. The thread size provides a compact but secure connection, enabling quick swapping of contact tips during setup changes. This compatibility reduces downtime and simplifies integration into existing measuring rigs or test fixtures. Material choice that supports everyday use Manufactured in steel, the insert balances wear resistance with machinability; steel provides dimensional stability under typical workshop conditions. For many routine measurement tasks, the material ensures the contact face remains true over repeated cycles, so the accessory contributes to longer service life and predictable measurement behaviour without the need for exotic materials. Practical selection for inspection and bench work This flat measuring insert is ideal where stable surface contact and repeatable readings are crucial—inspection stations, component testing and assembly quality checks. The compact form and standard thread make it a pragmatic choice for laboratories and workshops seeking economical, dependable accessories that integrate with existing dial gauge inventories. Contact Metav Werkzeuge today for availability and tailored advice on using Käfer measuring inserts in precision measurement setups; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000851677NW UID: 4000851677NW Label: Messeins.D.10mm plan M2,5 STA z.Messuhren KÄFER Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Product type: Messeinsatz Core specifications Diameter: 10 mm Thread: M2.5 Packaging unit: 1 Design & features Form: flat Material: steel Application: for dial gauges SKU: 4000851677NW FAQ What mounting thread does the insert use? The insert uses an M2.5 thread, which is a common size for dial gauge accessories and ensures straightforward attachment to compatible holders. Is the contact face suitable for delicate surfaces? The flat 10 mm contact face provides a stable contact area; for very delicate finishes, consider using a protective pad or a different contact geometry to avoid surface marking. Can this insert be used with all dial gauges? The insert is intended for use with dial gauges that accept M2.5-mounted accessories; compatibility depends on the gauge holder or adapter used rather than the gauge mechanism itself. How durable is the steel construction during repetitive use? Steel gives good wear resistance for standard workshop and inspection use, supporting consistent measurement behaviour over repeated contacts. What is included in the packaging unit? The packaging unit contains one measuring insert, ready for mounting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Gauge M2 T Magnet Magnetic Back 0.01mm Resolution, 58mm Dial - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of the combination of precise 0.01 mm resolution, a practical 10 mm measuring range and a secure magnetic rear mounting for reliable shop-floor checks and faster setup. Order directly via Metav Werkzeuge or consult our specialists for application advice. Dial indicator M2 T Magnet — dial gauge with 10 mm range & 0.01 mm resolution (Käfer) A Dial indicator M2 T Magnet is designed for comparative and workshop measurement tasks, offering a 10 mm range with 0.01 mm graduation and a magnetic rear mounting for fast, stable attachment. High resolution 0.01 mm 10 mm measuring range Magnetic rear mounting 58 mm dial, 1 mm per revolution Precise readings that speed up inspection work The instrument delivers a 0.01 mm graduation across a 10 mm range, which allows for fine comparative measurements and quick verification of tolerances. The large 58 mm dial improves legibility so readings are faster to take, and the scale is arranged so that one revolution equals 1 mm, reducing calculation errors during repetitive checks. These measurable characteristics translate directly into fewer rework cycles and more predictable process control on the shop floor. Stable mounting and handling to reduce setup time A magnetic rear mounting is integrated into the housing to hold the gauge firmly to ferrous work surfaces or fixtures, ensuring repeatable positioning and fewer positional errors. The sturdy fixing reduces the need for constant realignment during batch inspections, supporting uninterrupted measurement sequences. The robust design also means the instrument withstands everyday workshop handling, helping to maintain calibration intervals and extend useful service life. Practical use cases and suitability for workshop tasks The gauge is suitable for comparative measurement, alignment checks, and runout assessment in general workshop and production environments. Its clear, mechanical indication is convenient where digital readouts are unnecessary or where simple, fast checks are preferred. The combination of readable dial and magnetic fixing supports measuring tasks during setup, maintenance and quality control, providing tangible benefits in throughput and operator confidence while keeping training requirements minimal. For precise measurement needs, contact Metav Werkzeuge in Emmerich for tailored advice on the Käfer dial indicator M2 T Magnet with 0.01 mm resolution — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000851532NW Product type: Dial indicator Model series: M2 T Magnet Measuring range: 10 mm Graduation: 0.01 mm Execution: magnetic rear mounting Specifications Measuring range: 10 mm Resolution / graduation: 0.01 mm Dial diameter: 58 mm Revolutions: 1 mm per revolution Packaging unit: 1 Features Magnetic rear mounting for secure attachment Large 58 mm dial for improved readability Mechanical indication for immediate visual checks Suitable for workshop and production inspection FAQ How accurate is the instrument for fine measurements? The Käfer M2 T Magnet provides a 0.01 mm graduation, enabling fine comparative measurements across a 10 mm travel for reliable tolerance checks. Can the gauge be mounted directly on a machine table or fixture? Yes, the magnetic rear mounting secures the indicator to ferrous tables and fixtures, providing a stable reference for repetitive checks. What does 1 mm per revolution mean for everyday use? A single full rotation of the dial pointer corresponds to 1 mm of linear travel, which simplifies reading and reduces calculation steps during routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Gauge M2 TK Concentric Display 0.01mm Resolution, 58mm Outer Ring - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of the precise 0.01 mm graduation and a 10 mm measuring range combined with a clear concentric display for consistent inspection results; order the dial indicator directly via Metav Werkzeuge or contact our consultants for application advice. M2 TK Dial Indicator – 10 mm range, 0.01 mm graduation (Käfer) An M2 TK dial indicator designed for accurate displacement measurement in workshop inspection and quality control, featuring a concentric display for fast, unambiguous readings. 10 mm range, 0.01 mm graduation Concentric display for clear readings 58 mm dial, 1 mm per revolution Reliable precision for quality control and inspection The compact design delivers a 10 mm measuring range with a 0.01 mm graduation, enabling repeatable readings for routine checks and fine adjustments. With a fine graduation this size, the instrument provides objective numeric feedback that supports traceable quality control and reduces rework. The role of a dial indicator in alignment and comparative measurement tasks is to supply immediate, measurable data; the fine graduation and consistent scale make it possible to quantify deviations quickly and to document inspection outcomes in a reproducible way. Faster, clearer measurement in daily workshop use A concentric display reduces parallax and makes relative movement easy to follow, while the 58 mm dial ensures the scale is still large enough for quick interpretation under workshop lighting. The mechanism indicates 1 mm per revolution, which simplifies interpretation of larger displacements without losing resolution. These features combine to shorten inspection cycles and lower the chance of reading errors, which in turn supports smoother process flows and fewer stoppages during setup and maintenance procedures. Straightforward integration and dependable manufacture Built as part of the M2 TK series by Käfer, the instrument is intended for direct use on test stands, comparators and manual fixtures where reliable visual indication is required. The straightforward specification—measuring range, graduation and concentric display—allows easy substitution for existing gauges without complex recalibration of comparative setups. The manufacturer’s pedigree supports consistency across batches, providing procurement confidence for workshop managers seeking robust, serviceable measuring tools. Contact Metav Werkzeuge today for specific application advice or to arrange supply of the Käfer M2 TK dial indicator—Metav Werkzeuge can advise on compatibility with existing inspection equipment and delivery options. Technical Data Article number: 4000851507NW Product type: Dial indicator Label: Messuhr M2 TK 10mm Abl.0,01mm konzentrische Anzeige KÄFER Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Facts Measuring range: 10 mm Graduation: 0.01 mm Dial diameter: 58 mm 1 mm per revolution Packaging unit: 1 Special features Concentric display Model series: M2 TK SKU: 4000851507NW FAQ How accurate is the instrument for small displacement measurements? The Käfer M2 TK dial indicator offers a 0.01 mm graduation, providing fine resolution suitable for precision inspection and comparative measurements. What is the visible range and how is it read? The device provides a 10 mm measuring range; the 58 mm dial and concentric scale indicate 1 mm per revolution, making both small and larger displacements easy to interpret. Is this dial indicator suitable for use on test stands and comparators? Yes, the M2 TK series is designed for integration with standard test stands and comparator setups that require a reliable visual indicator. What information identifies the exact model? The SKU 4000851507NW and the model designation M2 TK identify the specific dial indicator variant and its standard concentric display configuration. Does the gauge come individually packaged? The product is supplied as a single unit; packaging unit is 1. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Gauge M2 Top S With Shock Guard 0.01mm Resolution, 58mm Bezel - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of the combination of high-resolution 0.01 mm readings, a compact 10 mm measuring range and robust shock protection for consistent workshop measurement results. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Käfer M2 Top S Dial Indicator — 10 mm range, 0.01 mm graduation The Käfer M2 Top S Dial Indicator is a compact precision instrument for comparative measurements, runout checks and fine inspection tasks in workshop and quality-control environments. High resolution 0.01 mm graduation 10 mm measuring range Shock-protected housing 58 mm bezel; 1 mm per revolution Precise increments that reduce rework and speed inspection With a graduation of 0.01 mm and a 10 mm measuring range, this dial gauge provides measurable improvements in repeatability and process control. The clear division of 1 mm per revolution means each full turn of the pointer equals a millimetre of spindle travel of the spindle, so readings are straightforward even during rapid checks. For workshop metrology this translates into fewer measurement cycles, reduced rejection rates and a more efficient inspection routine. The instrument’s mechanical design ensures stable pointer behaviour, which supports consistent comparative measurement and tight tolerance verification. Robust construction for demanding workshop conditions The M2 Top S series is specified with shock protection, delivering enhanced resistance to accidental knocks and drops that commonly occur in busy production environments. The 58 mm bezel diameter improves visibility of the dial without increasing bulk, while the protected internal mechanism extends service intervals and reduces downtime. As a result, maintenance needs are minimised and the gauge remains accurate under everyday stresses. This rugged approach supports longevity and helps maintain measurement reliability on the shop floor. Clear, user-friendly display for faster decision-making A compact layout and well-proportioned dial make readings quick and unambiguous. The combination of a generous bezel and fine graduation means that measurement points can be assessed at a glance, accelerating inspection throughput. The design suits mounting on standard stands and holders commonly used in metrology benches and test rigs, enabling rapid set-up and repeat checks. By simplifying the reading process, the instrument helps technicians make faster, better-informed quality decisions. Suitable applications and who benefits most This mechanical dial indicator is ideal for toolrooms, small-series production, quality control benches and maintenance workshops that require dependable comparative measurement. The instrument supports tasks such as runout measurement, height comparisons and alignment checks where resilient construction and 0.01 mm resolution are required. For teams seeking an affordable precision gauge that combines clarity, durability and straightforward mechanics, this model represents a practical choice. Contact Metav Werkzeuge for tailored advice on integrating the Käfer M2 Top S dial indicator into existing measurement setups and to request delivery or technical clarification from the Emmerich team Technical Data Article number: 4000851666NW Product: Dial indicator Model series: M2 Top S Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Specifications Measuring range: 10 mm Graduation / reading: 0.01 mm 1 revolution: 1.0 mm Bezel diameter: 58 mm Features Shock protection Mechanical dial indicator Compact workshop design FAQ What is the smallest increment the instrument reads? The Käfer M2 Top S dial indicator reads in increments of 0.01 mm, providing fine resolution for comparative and inspection tasks. What measuring range does the gauge offer? This dial indicator has a measuring range of 10 mm, suitable for many bench and in-process checks. How does the bezel diameter affect readability? A 58 mm bezel increases the visible dial area, improving legibility and allowing faster, more reliable readings with standard lighting. Is the instrument suitable for workshop use? Yes, the M2 Top S is specified with shock protection, which enhances durability in workshop and production environments. How is the scale related to pointer revolutions? The dial is calibrated so that one full pointer revolution equals 1.0 mm of spindle travel, simplifying interpretation during repetitive measurements. Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Indicator 0.01mm Resolution Rotating Bezel Lift Lever Plastic Case - Metav IndustryLine
Robust 56 mm dial readability, a 0.01 mm graduation and a practical lift lever combine to deliver reliable micro‑measurements for process control; order directly via Metav Werkzeuge or consult our specialists for application support. Dial indicator M208.009 — 56 mm dial, 0–10 mm range, 0.01 mm resolution (Metav IndustryLine) The Dial indicator M208.009 is an analogue gauge for precise short‑range measurements in fine mechanics and workshop quality checks, featuring a rotating bezel for zero setting and a lift lever for quick probe release. 56 mm dial for clear readability 0.01 mm graduation for fine resolution Lift lever for fast probe retraction Rotating bezel for zero setting Precision where it counts for micro measurements The instrument is designed for micro‑class checks with a measuring span of 0–10 mm and a reading step of 0.01 mm, which makes it suitable for delicate inspection tasks. The specified accuracy of ±0.017 mm provides a predictable error band for routine quality control; this level of repeatability supports statistical process control and reduces the need for repeated rework. An analogue display simplifies rapid visual assessment, while the clear 56 mm dial improves readability under workshop lighting. Workshop‑ready ergonomics to speed up inspection cycles A compact, well‑balanced gauge reduces operator fatigue during repetitive use. The lift lever enables swift retraction of the contact point, cutting cycle times on parts that require frequent repositioning. The rotating outer ring (bezel) permits fast zeroing at the measuring reference, so comparative measurements and runouts can be recorded without additional adjustments. At roughly 0.27 kg, the instrument is light enough for handheld use yet stable on stands for bench inspection. Simple operation and reliable adjustment for consistent results The analogue layout avoids electronic dependencies while offering precise graduations for direct readings. The rotating bezel is useful for setting a reference zero or for comparative gauging against a master. Clear tolerance marks on the housing aid quick pass/fail decisions at the bench; the device is produced to factory standard (Werksnorm) and is intended for immediate integration into existing inspection routines. Basic upkeep is straightforward: keep contact faces clean and check mechanical play periodically to maintain measurement integrity. Practical applications and benefits for production environments This dial indicator is particularly suited to fine mechanical shops, toolrooms and assembly lines where short‑range checks are frequent: component thickness checks, spindle runout, fixture verification and small bearing inspection. As a mechanical, analogue gauge it provides a cost‑effective, low‑complexity solution for immediate measurement tasks and complements higher‑end digital systems for cross‑checks. The combination of compact size, fine graduation and practical controls supports faster quality decisions and more predictable process output. Contact Metav Werkzeuge in Emmerich for tailored application advice and fast supply of the Metav IndustryLine dial indicator M208.009 — expert guidance is available by email or phone Technical data Article number: M208.009 GTIN: 4054469103709 Brand: Metav IndustryLine Numbers / Core technical data Measuring range: 0–10 mm Resolution / Graduation: 0.01 mm Dial diameter: 56 mm Accuracy: ±0.017 mm Weight: 0.27 kg Special features / Versions Analogue dial indicator (mechanical) Lift lever for probe retraction Rotating outer bezel for zeroing Delivered to Werksnorm (factory standard) Classified as Micro (0–10 mm range) FAQ Is the dial indicator delivered calibrated? The instrument is delivered to the factory standard (Werksnorm); specific calibration certificates are not indicated for this model. What resolution and accuracy can be expected? The M208.009 provides a 0.01 mm graduation and an accuracy of ±0.017 mm, suitable for routine micro‑measurement tasks. How is the zero set and adjusted? Zeroing is performed via the rotating outer bezel; the bezel allows quick comparative measurements without altering the probe position. Can the lift lever be used during repeated checks? Yes — the built‑in lift lever on the M208.009 speeds repetitive gauging by retracting the contact point for repositioning. For which applications is this indicator most suitable? The instrument is intended for short‑range inspections in fine mechanics, toolrooms and general workshop quality control where micro‑measurements are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Indicator 0.01mm Resolution, 58mm Bezel - TECWERK
Take advantage of a compact, DIN‑compliant measuring instrument that combines a 10 mm range with 0.01 mm resolution for reliable comparative checks; its 58 mm dial and 1.0 mm per‑revolution gearing speed up readings and reduce cycle time on the workshop bench. Order directly via Metav Werkzeuge or consult our specialists for integration advice. TECWERK Dial Gauge (Messuhr DIN 878) — 10 mm range, 0.01 mm resolution TECWERK Dial Gauge (Messuhr DIN 878) is a precision comparative instrument for workshop inspection and production control with a 10 mm measuring range and 0.01 mm graduation. DIN 878 standard-compliant design 10 mm measurement range 0.01 mm fine resolution 58 mm large dial for easy reading Compact accuracy for routine inspection A compact dial indicator provides a straightforward means to check small deviations and repeatable features. With a 10 mm measuring range and 0.01 mm graduation, the instrument enables fine detection of tolerances commonly required in maintenance and toolroom work. The gearing is set so that each full dial rotation corresponds to 1.0 mm per revolution, which simplifies interpretation during stepped measurements. This combination of range and division reduces measurement uncertainty when used with a stable stand or comparator and supports quick go/no‑go assessments on the production line. Faster readings with improved legibility The larger 58 mm dial improves visibility under workshop lighting and allows operators to read small increments more quickly than on compact bezels. Markings conform to the DIN specification, so scales and pointer travel are laid out for intuitive interpretation; this reduces handling time and the risk of misreading. The robust dial face design assists in maintaining consistent repeatability across many cycles, making it suitable for incoming inspection, set‑up checks and routine process control where clear, repeatable readings are essential. Practical integration for quality processes Designed as a comparative measuring tool, the indicator fits standard holders and stand systems commonly found in inspection areas. Its straightforward mechanical function means calibration and zeroing are quick operations; a simple reference master or gauge block can establish repeatable baselines. For workshops seeking to streamline quality checks, the dial indicator offers a reliable method to confirm conformity without complex set‑ups, supporting faster throughput and a more consistent inspection routine. Contact Metav Werkzeuge for tailored advice on integrating the TECWERK dial gauge (SKU 2000851510NW) into inspection workflows and request delivery or compatibility guidance from our Emmerich team. Technical Data Article number: 2000851510NW Label: Messuhr DIN 878 10mm Abl.0,01mm TECWERK SKU: 2000851510NW Manufacturer: TECWERK Facts Measuring range: 10 mm Resolution / graduation: 0.01 mm Revolutions: 1.0 mm per full dial rotation Dial diameter: 58 mm Packaging unit: 1 Special features DIN 878 standard compliance Large, easy‑to‑read dial Mechanical dial indicator principle Suitable for bench and comparator use FAQ How precisely does the dial gauge measure small deviations? The TECWERK dial gauge measures in steps of 0.01 mm, offering precise detection of small deviations within a 10 mm range for comparative checks. Can the gauge be mounted on common stands and holders? Yes, the dial indicator is designed to fit standard holders; the 1.0 mm per revolution gearing and the 58 mm dial make it straightforward to use with typical inspection stands. Is the scale layout compliant with industry standards? The instrument follows the DIN 878 specification for layout and pointer travel, ensuring consistent, standardised scale interpretation. Which workshop tasks is this dial indicator best suited for? The dial gauge is ideal for set‑up checks, toolroom inspection and routine production control where quick, repeatable comparative measurements are required. What does one full rotation of the pointer represent? One full rotation of the pointer corresponds to 1.0 mm, which simplifies multi‑turn readings and cumulative measurement recording. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
10mm Dial Indicator 0.1mm Resolution 40mm Bezel Diameter - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of the compact 10 mm measuring range and clear 0.1 mm graduation for fast comparative checks; the simple mechanical design and 40 mm bezel ensure readable results and durable workshop use. Order the instrument directly via Metav Werkzeuge or request specialist advice to verify suitability for specific metrology tasks. KÄFER KM 10A Dial Gauge — 10 mm range, 0.1 mm graduation The KÄFER KM 10A is a precision mechanical dial gauge for quick displacement and comparative measurements in workshop and inspection setups. Compact 10 mm measuring range for small displacements 0.1 mm graduation for rapid readings 40 mm bezel for clear scale visibility One pointer revolution = 10 mm for extended indication High-precision readings for routine inspection The compact mechanical dial gauge delivers straightforward measurement data with a measuring range of 10 mm and a graduation of 0.1 mm, making it suited to fast comparative checks and setup controls. The plain scale and robust movement reduce interpretation time during repeated tasks; the specification "one pointer revolution = 10 mm" extends the readable range without adding complexity. For workshops where quick, repeatable results matter, the instrument provides a reliable baseline measurement method that integrates easily with stands and carriers. Clear visibility and durable mechanics for workshop life A 40 mm bezel and a concise dial layout prioritise legibility under typical workshop lighting. The mechanical construction of the gauge avoids dependency on batteries or electronics, which simplifies maintenance and keeps downtime low. This combination of readability and mechanical simplicity reduces the risk of ambiguous readings and supports steady throughput in production checks, calibration procedures and setup verification tasks where consistent, rapid feedback is required. Practical application and integration into metrology workflows Designed for comparative displacement measurement, the instrument is suitable for alignment checks, runout assessment and depth comparisons when mounted on a magnetic base or stand. The 10 mm range and the clear 0.1 mm division enable swift detection of deviations during assembly and tooling adjustments. When documenting results for quality records, the gauge’s straightforward scale makes it easier to record and communicate findings within inspection routines or machine set-up documentation. Reliability and suitability for everyday use The mechanical nature of the device emphasises longevity and simplicity of service; periodic cleaning and light lubrication of the moving parts are typically sufficient to maintain functionality. The basic specification supports users who require dependable comparative readings without the complexity of digital systems. For organisations seeking a cost-effective instrument to complement a larger metrology set-up, the gauge represents a reliable measuring aid that lends itself to repeated, routine use. Contact Metav Werkzeuge to request a technical consultation or quotation for the KÄFER KM 10A and secure prompt delivery from Emmerich for reliable workshop measurement supplies Technical data Article number: 4000851433NW Product name: KÄFER KM 10A dial gauge Type: Dial gauge Model series: KM 10A Facts Measuring range: 10 mm Graduation (resolution): 0.1 mm One pointer revolution: 10 mm Bezel (outer ring) diameter: 40 mm Special features Mechanical dial indicator Packaging unit: 1 Manufacturer name: Käfer Messuhrenfabrik GmbH & Co. KG FAQ How precise is the KM 10A for routine workshop checks? The KÄFER KM 10A provides a graduation of 0.1 mm, which is suitable for quick comparative and setup checks where this level of resolution meets the inspection tolerance. Can the dial gauge be read for movements beyond 10 mm? One full pointer revolution corresponds to 10 mm, so larger displacements can be inferred by counting revolutions and the dial position to determine the total movement. Is the KM 10A suitable for mounting on magnetic bases and stands? Yes, the mechanical design of the dial gauge is compatible with common mounting arrangements used in workshop metrology for alignment and runout tasks. What maintenance does the dial gauge require to stay accurate? Basic upkeep such as keeping the stem clean, avoiding shocks and applying light lubrication to moving parts will preserve consistent readings from the KÄFER KM 10A. Which measurement tasks is this model best suited to? The gauge is ideal for comparative displacement measurements, quick runout checks and assembly or tooling adjustments where a 10 mm range and 0.1 mm graduation are appropriate. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Indicator Contact Plate Thread 2.5mm - Metav IndustryLine
Combine the M2.5 thread compatibility with a flat Ø10 mm contact to achieve reliable, repeatable contact measurements in routine inspection tasks. Order the measuring insert directly via Metav Werkzeuge or consult the team if further specifications are required. Measuring insert for dial gauge – flat Ø10 mm, M2.5 thread (Metav IndustryLine) A measuring insert designed as a flat contact plate with Ø10 mm for use on a dial gauge with an M2.5 connection; suited to workshop inspections and dimensional checks. Flat contact Ø10 mm for stable readings Direct M2.5 thread connection for simple mounting Compact accessory for routine inspection tasks Compatible with standard dial gauges and test stands Precise contact geometry for repeatable checks The flat contact plate provides a defined bearing surface, which improves repeatability when checking flat faces or shallow features. Fitted with a standard M2.5 thread, the insert mates directly with most dial gauges that use this connection, eliminating adapters and reducing stack-up variables. This results in fewer handling steps and a clearer traceability chain during incoming inspection or spot checks, supporting efficient quality workflows in manufacturing and maintenance environments. Practical benefits for the workshop and inspection bench Thanks to its compact design and flat Ø10 mm contact, the accessory is particularly well suited to repetitive contact routines where a consistent contact area is required. The modest mass supports gentle contact dynamics, lowering the risk of probe bounce and enabling stable pointer behaviour on analogue gauges and steady readings on digital indicators. As a small, specialised accessory, it simplifies fixture design and can be integrated into test jigs or portable measuring setups without adding unnecessary bulk. Compatibility and application scenarios Configured for dial gauges that accept an M2.5 connection, this insert is ideal for routine dimensional control, final inspection, and comparative checks on machined components. Its defined contact surface makes it suitable for measuring flat faces, shoulders and shallow recesses where a stable reference is necessary. The product supports commonly required metrology tasks in metalworking, assembly inspection and toolroom maintenance, helping to standardise contact conditions across multiple operators and shifts. Select this Metav IndustryLine measuring insert for consistent contact performance and request expert advice from Metav Werkzeuge in Emmerich – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M208.174 GTIN: 4054469105246 Weight: 0.1 kg Contact diameter: Ø10 mm Thread: M2.5 Label: Measuring insert for dial gauge, flat Ø10 mm, thread 2.5 mm Category: Accessory (Measuring devices) Tariff number: 90319000 Facts Compatible with dial gauges featuring an M2.5 connection Compact, workshop-suitable accessory Simple screw-in mounting Special features Flat contact surface for stable bearing Small mass for reduced probe dynamics Designed for routine inspection and test fixtures FAQ Is this insert compatible with standard dial gauges? The insert is compatible with dial gauges that have an M2.5 connection thread; it screws directly into gauges and stands made for that thread size. What is the diameter of the contact face? The contact face is a flat plate with a diameter of 10 mm, designed to provide a defined bearing area for repeatable readings. Can the insert be used on analogue and digital indicators? Yes, the insert is suitable for both analogue dial gauges and digital indicators that accept an M2.5 threaded contact. How is the insert mounted and secured? Mounting is by the standard M2.5 thread; hand‑tightening is generally sufficient for inspection tasks, with care taken to avoid over‑tightening. For which measuring tasks is this accessory most useful? It is best used for flat-face checks, shoulders and shallow features where a stable, repeatable contact surface improves measurement consistency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Indicator M 10A 0.1mm Resolution, 58mm Bezel - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of reliable mechanical measurement with clear readability and a compact footprint; the combination of a 10 mm measuring range and 0.1 mm graduation supports fast, consistent in‑process checks. Order the dial indicator directly via Metav Werkzeuge or ask the consultants for application advice. Käfer M 10A dial indicator — 10 mm range, 0.1 mm graduation Käfer M 10A dial indicator for workshop inspection and basic metrology tasks, designed for straightforward dimensional checks and bench use 10 mm measuring range 0.1 mm graduation 58 mm bezel diameter One revolution = 10 mm Consistent readings for routine inspection The M 10A dial indicator provides a 10 mm measuring range with a coarse but robust 0.1 mm graduation, making it suitable for rapid go/no‑go checks and repetitive tasks on the shop floor. The mechanical movement delivers a direct analogue readout, which simplifies interpretation in high‑throughput settings and reduces the need for immediate digital documentation. The plain scale and mechanical pointer reduce electronic failure modes and facilitate quick assessments during setup or maintenance cycles. For operations where digital traceability is not mandatory, the instrument supports reliable dimensional control with minimal training. Large dial and simple scaling accelerate measurement A 58 mm bezel offers a clear viewing area so that graduations are easily distinguishable under workshop lighting. The instrument is engineered so that one revolution of the pointer equals 10 mm, which simplifies cumulative measurement tasks and makes stepwise checks intuitive for operators. This straightforward correlation between pointer rotation and linear displacement reduces counting errors and speeds up routine inspections, improving throughput without compromising repeatability. Robust format for everyday workshop use The mechanical construction of this indicator prioritises simplicity and longevity; the compact dial body is suitable for mounting on standard stands or magnetic bases commonly found in metrology benches. The analogue design removes dependence on batteries and electronic modules, offering low maintenance and predictable performance across varied ambient conditions. Where compatibility with existing fixturing is required, the instrument’s conventional layout ensures integration with common holders and comparators used in production quality control. Purchase support and confidence from a specialist supplier Procurement through Metav provides the advantages of a focused precision partner: Metav stands for the democratisation of precision, making accurate measurement equipment affordable and reliable for every workshop. With established logistics from Emmerich acting as a quality filter for the European market, Metav combines decades of experience with wide product availability. Unsure if the gauge meets a specific requirement or need additional measurements? Technical assistance and detailed advice are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930, ensuring the right selection for the intended application. Contact Metav Werkzeuge for application guidance or to request immediate dispatch of the Käfer M 10A dial indicator from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 4000851257NW Label: Messuhr M 10A 10mm Abl.0,1mm KÄFER Model series: M 10A Product type: Dial indicator UID: 4000851257NW Facts Measuring range: 10 mm Graduation: 0.1 mm Bezel diameter: 58 mm Pointer: one revolution = 10 mm Packaging unit: 1 Special features Analogue dial display Workshop‑oriented mechanical movement Standard mounting interface compatibility FAQ What is the measuring range and resolution of the dial indicator? The Käfer M 10A dial indicator has a 10 mm measuring range and a 0.1 mm graduation for coarse, robust checks. Can this indicator be mounted on common stands and bases? Yes, the gauge uses a conventional dial indicator layout that is compatible with standard stands and magnetic bases used in workshop metrology. Is the instrument suitable for continuous production checks? The mechanical design of the M 10A supports frequent in‑process inspections; its analogue operation reduces downtime related to battery or electronic faults. How is cumulative displacement read from the dial? One full pointer revolution corresponds to 10 mm, which simplifies incremental measurement and cumulative comparison tasks. What should be considered when choosing this indicator for inspection tasks? Consider the required resolution: the 0.1 mm graduation is ideal for general checks but not for high‑precision micrometric measurement; pairing with bench fixtures improves repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Dial Indicator M2 SW With Shock Protection 0.01mm Resolution, 61.5mm Outer Ring - Käfer Messuhrenfabrik GmbH & Co. KG
Data issue: the manufacturer "Käfer Messuhrenfabrik GmbH & Co. KG" is not present in the authorised manufacturer list provided; full manufacturer and address details from the approved list are required before a compliant product description can be generated, as the absence of this information prevents accurate verification of the manufacturer's credentials and compliance with the necessary regulatory standards, which is a critical step in ensuring that the product meets all legal and quality requirements; therefore, it is essential to cross-check the details against the approved database to avoid potential discrepancies or errors in documentation and ensure the product's eligibility for market approval.
Precise measurements with dial indicators for workshop and production use
Dial indicators are high-quality measuring devices designed for a variety of measuring ranges and fine-tuning tasks. These instruments, available in digital and analogue versions, enable precise assessment of concentricity, flatness and comparative measurements in confined or critical areas.
How dial indicators work and where they are essential
Analogue dial indicators transmit the linear movement of the probe via a rack-and-pinion mechanism to the pointer, with an additional revolution counter showing extended travel. Many types operate in both compression and tension, so a wide effective measuring range is covered. Lever-type indicators use a lever system instead of a rack, offering a smaller range but finer resolution. Typical workshop applications include runout checks at the lathe, setting up depth on milling tables or circular saws, and comparative checks during series production.
Tangible benefits for everyday production
- Fast, repeatable readings for comparison work, reducing setup and inspection time.
- Stable measuring force and hardened contact tips for reliable, wear-resistant contact and consistent results.
- Broad selection: digital dial indicators, mechanical dial indicators, depth gauges, lever-type test indicators, fine‑point test indicators and thickness gauges cover most shop tasks.
- Reduced risk of measurement error through appropriate instrument choice and accessories, improving first-pass yield.
- Flexible deployment on machines and inspection benches thanks to standardised mounts and probes.
Why choose Metav as your precision partner
Metav stands for the democratisation of precision, combining decades of expertise with a comprehensive inventory for industry, crafts and trade. From Emmerich, Metav operates as a practical quality filter for the European market, supplying over 48,000 satisfied customers and more than 250,000 products. For buyers who prioritise dependability and a single-source approach, Metav’s range of dial indicators and related measuring equipment provides a technically sound and convenient solution.
Core takeaway
Dial indicators deliver precise, repeatable measurements across a variety of specialised tasks; selecting the correct type—whether digital, analogue or lever-type—ensures reliable results and smoother production processes.
FAQ
What is the main difference between analogue and digital dial indicators?
Analogue dial indicators transmit movement via a rack-and-pinion and show mechanical pointer travel, which can be advantageous for visual trend detection; digital dial indicators provide direct numerical readout and often allow data output for logging and analysis, both of which are available from Metav.
When should I use a lever-type test indicator instead of a standard dial indicator?
Use a lever-type indicator when you need finer resolution over a small measuring range or when the probe must access tight spaces; lever-type instruments are particularly useful for checking runout and small surface variations.
How do I avoid damaging an analogue dial indicator’s gearing?
Avoid forcing the probe beyond its travel range; where significant overtravel is possible, choose a model with an appropriate range or a built-in stop. A drag pointer or anti-backlash feature can also reduce the risk of gear damage by preventing delayed pointer return.
Are special contact tips necessary for different materials?
Yes. For consistent results and reduced wear, choose hardened contact tips or balls appropriate to the material and surface finish being measured; Metav’s product range includes a variety of probe tips and accessories for this purpose.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com