Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
14mm Shank End Mill for APXT 1003 Indexable Inserts, 30mm Cutting Length, 90° - Teknik Makina
Take advantage of the combination of precise Ø14 mm shank, a 30 mm cutting length and secure Torx clamping for dependable milling performance; the design supports APXT 1003 indexable inserts and reduces changeover time. Order the S138TM directly via Metav Werkzeuge or ask our consultants if needed. Schaftfräser S138TM – shank cutter Ø14 mm, for APXT 1003 indexable inserts (Teknik Makina) Schaftfräser S138TM is a compact shank cutter engineered for reliable mounting of APXT 1003 indexable inserts in general milling operations. Compatible with APXT 1003 indexable inserts Ø14 mm shank for high rigidity 30 mm effective cutting length Secured with Torx screw M2,5x5,5 (T8) Secure insert clamping for uninterrupted production The holder is engineered to give a secure and repeatable connection between the tool body and the indexable plate. With a Torx M2.5x5.5 clamping screw operated by a T8 key, insert changes are quick and require only basic tooling, reducing machine downtime. This secure fastening ensures stable cutting conditions and consistent part quality when machining with APXT 1003 plates from recognised manufacturers. Small footprint, high rigidity — consistent surface quality A Ø14 mm shank paired with a 30 mm cutting length and a 100 mm overall length offers a compact solution that nevertheless resists deflection under load. The slim yet rigid geometry delivers improved surface finish and dimensional repeatability in through-feed and profiling tasks. At just 0.126 kg, the toolholder keeps spindle load low while maintaining the stiffness needed for controlled chip formation and reduced chatter. Compatible system design to simplify tooling choices Designed for APXT 1003 indexable inserts and compatible with Korloy plates, the toolholder simplifies tool inventory and shortens setup procedures. The single-cutting-edge configuration is suited to finishing and light-roughing operations where predictable chip evacuation and minimal toolpath correction are priorities. Clear mechanical fit and standardised clamping mean predictable repeatability across repeat orders. For reliable tooling from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for product advice and fast supply—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S138TM Manufacturer: Teknik Makina Designation: shank cutter for APXT 1003 indexable inserts SKU: S138TM Core data Shank diameter: 14 mm Cutting length: 30 mm Overall length: 100 mm Number of cutting edges: 1 Weight: 0.126 kg Design and features Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Clamping screw: M2,5x5,5 Required Torx key: T8 FAQ What inserts fit this shank cutter? The S138TM is designed for APXT 1003 indexable inserts and is compatible with inserts from Korloy as specified. How is the insert fixed in place? Insert retention is achieved with a Torx M2.5x5.5 clamping screw; a T8 key is used for tightening and removal. What is the shank diameter and why does it matter? The shank diameter is 14 mm; a larger shank diameter increases rigidity and reduces deflection for improved surface finish. Is this tool suitable for finishing work? Yes, the single-cutting-edge configuration and stable clamping make the toolholder suitable for finishing and light-roughing applications. What is the overall length of the tool? The overall length is 100 mm, providing a compact assembly that balances reach and stiffness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Carbide End Mill for APKT 1003 Indexable Inserts Internal Coolant, 120mm Overall Length - Teknik Makina
Take advantage of the combination of a compact 14 mm shank, internal coolant and compatibility with APKT 1003 indexable inserts for reliable, low-downtime milling operations; order the tool directly via Metav Werkzeuge or ask our consultants for application advice. Shaft Milling Cutter S160-1TM – 14 mm shank, internal coolant (Teknik Makina) The Shaft Milling Cutter S160-1TM is a solid shank cutter designed for use with APKT 1003 indexable inserts, offering precision machining in compact setups with integrated internal coolant. 14 mm shank for compact toolholders Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts Precision overall length 120 mm for stability Consistent cutting performance for industrial milling The S160-1TM is engineered to deliver consistent cutting performance in demanding workshop environments. With a 14 mm shank and a total length of 120 mm, the tool is balanced for stability while remaining suitable for machines with limited spindle clearance. Its compatibility with APKT 1003 indexable inserts allows quick replacement of worn cutting edges, which reduces downtime and keeps production flowing. Indexable inserts are secured mechanically, so the cutting edge can be renewed without regrinding the whole tool. Improved tool life and process reliability through internal cooling Built-in internal coolant directs cutting fluid close to the cutting zone, which lowers temperatures and improves lubrication at the insert edge. This cooling strategy helps to extend insert life and stabilise cutting forces, particularly during continuous or interrupted cuts. The cutter accepts a single insert seat for a focused cutting action, backed by a secure fastening with a T8 Torx key and an M2.5 x 5.5 screw, ensuring repeatable insert seating and minimal runout for precision work. Quick setup and practical handling to save workshop time Setup and changeover are straightforward: the insert is fixed with a Torx screw (supplied dimensions M2.5 x 5.5) and adjusted with a T8 key, enabling fast tool maintenance. The tool’s lightweight construction (approx. 0.151 kg) and compact design reduce operator fatigue during handling and make it easier to manage tool inventories. The 30 mm cutting length provides an effective engagement zone while limiting deflection, which supports tighter tolerances in finishing and semi-finishing operations. Compatibility, inventory simplicity and production advantages Designed for use with inserts from Korloy in the APKT 1003 format, this cutter reduces the need for multiple dedicated tools by leveraging replaceable inserts. The result is a lower stocking requirement and a more economical approach to tool wear: worn inserts are replaced rather than whole cutters. The cutter’s specification is suitable for a wide range of industrial milling tasks where a compact, coolant-fed, insert-based solution is preferred. For workshop-ready precision and confident reliability from Teknik Makina, contact Metav Werkzeuge to discuss tooling combinations or to place an order—Metav Werkzeuge provides experienced advice and a reliable European supply channel. Technical data SKU: S160-1TM Label: 14 mm shaft milling cutter APKT 1003 L120 mm with internal coolant Manufacturer: Teknik Makina Product type: Shaft milling cutter eClass: 21180806 Facts Shank diameter: 14 mm Overall length: 120 mm Cutting length: 30 mm Weight: 0.151 kg Number of cutting edges: 1 Torx key: T8 Torx screw: M2.5 x 5.5 Internal coolant: Yes Compatibility & special features Compatible with APKT 1003 indexable inserts Suitable for inserts by Korloy SKU/UID: S160-1TM / S160-1TM Category: Shaft milling cutters FAQ Which inserts fit this cutter? The cutter is designed for APKT 1003 indexable inserts; Korloy APKT 1003 inserts are explicitly compatible with the tool. How is the insert secured? An M2.5 x 5.5 Torx screw secures the insert; a T8 key is required for tightening and replacement. Does the cutter provide coolant supply to the insert? Yes, the tool features internal coolant, delivering fluid directly to the cutting zone to aid cooling and chip control. What are the key dimensions for machine setup? Relevant dimensions include a 14 mm shank diameter, 120 mm overall length and 30 mm cutting length for clearance and stability planning. Is this cutter suitable for compact toolholders? The 14 mm shank and compact overall length make it suitable for many compact toolholder setups where space is limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
15.5mm Shank Cutter For SPMG 0502-0904 Indexable Inserts, 2 Flutes 40mm Cutting Length, M2.2x5 Torx Screw - Teknik Makina
Combining compact design with secure clamping and fast insert changes, this shank milling cutter ensures consistent, repeatable results in small-scale milling operations. Benefit from the 15.5 mm cutting diameter, robust 16 mm shank and quick Torx fastening for efficient tool changes – order directly via Metav Werkzeuge or consult the specialists if further clarification is required. S820TM shank milling cutter — compatible with SPMG 0502–0904 indexable inserts, 15.5 mm diameter A compact S820TM shank milling cutter engineered for precision milling using SPMG 0502–0904 indexable inserts, ideal for confined toolholders and short-reach machining tasks. Compatible with SPMG 0502–0904 indexable inserts 15.5 mm cutting diameter for compact milling 16 mm shank for secure toolholder clamping Torx M2.2×5 fastening with T7 key Precision in a small footprint: consistent results with indexable inserts The compact design delivers a high degree of rigidity for its size, making the cutter well suited to short-run milling and finishing passes where stability matters. By accepting SPMG 0502–0904 indexable inserts, the tool enables fast insert replacement and consistent edge geometry without regrinding, which reduces machine downtime and keeps process costs predictable. The 15.5 mm cutting diameter and 2 cutting edges provide a balance between material removal rate and surface finish, while the modest mass contributes to low spindle load during acceleration. For users new to indexable tooling, an indexable insert is a replaceable cutting element that locates precisely in the cutter body, offering economic cutting-edge changes and repeatable positioning. Secure clamping and easy maintenance for uninterrupted production A 16 mm shank ensures stable clamping in common toolholders, improving concentricity and reducing chatter in short overhang setups. The insert is secured with a M2.2×5 Torx screw tightened using a T7 key, a fastening system that speeds up replacement and maintains repeatable clamping torque compared with slotted screws. The cutter’s 40 mm cutting length and 120 mm overall length suit confined workspaces and allow controlled engagement depths. At approximately 0.188 kg, the tool is light enough for rapid tool changes while still providing the mass needed for dampening vibration in interrupted cuts. Versatile workshop use and straightforward selection criteria Designed for flexibility in production environments, the tool performs well in face milling and slotting operations where a compact tool is required. The combination of a small-diameter cutter body with an indexable-insert system reduces tooling inventory complexity: only inserts need periodic replacement rather than whole cutters. Technical purchasers benefit from clear, measurable specifications — 15.5 mm diameter, 16 mm shank and defined fastening type — which simplify toolholder and spindle compatibility checks. For procurement and workshop planning, the straightforward geometry and standard fastening type make integration into existing tool sets uncomplicated and predictable. For reliable compact milling, order the Teknik Cutting Tools S820TM shank milling cutter via Metav Werkzeuge or contact the Metav specialists at info@metav-werkzeuge.com / +49 2822 7131930 for tailored technical advice and rapid delivery from Emmerich. Technical Data Article number: S820TM Manufacturer: Teknik Makina Product: Shank milling cutter Compatible inserts: SPMG 0502–0904 indexable inserts Fastening: Torx screw M2.2×5, T7 key Facts Cutting diameter: 15.5 mm Number of cutting edges: 2 Overall length: 120 mm Cutting length: 40 mm Shank diameter: 16 mm Weight: 0.188 kg Special features Compact design for confined toolholders Quick insert changes via Torx fastening Files: 62de7e5033927e49dbf32749; 62de7ee633927e49dbf3278e FAQ Which indexable inserts fit this cutter? The cutter is designed for SPMG 0502–0904 indexable inserts; using the specified insert grade and geometry ensures correct seating and chip control for the S820TM shank milling cutter. How is the insert secured and what tool is required? An M2.2×5 Torx screw secures the insert; tightening and removal require a T7 key, allowing quick and repeatable insert changes for the S820TM. What applications suit this compact cutter? The tool is suitable for compact face milling and slotting tasks where a small-diameter, rigid shank milling cutter is needed; the dimensions support confined setups and short-reach operations. What are the key dimensions to check for toolholder compatibility? Check the 16 mm shank diameter, 15.5 mm cutting diameter and 120 mm overall length to ensure compatibility with the intended toolholder and to verify allowable overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter 12mm Shank For LNMX 0402 Indexable Inserts With Internal Coolant, 3 Flutes - Teknik Makina
Take advantage of a coolant-fed, indexable solution that combines secure insert compatibility and a compact 12 mm shank for reliable milling performance; order directly via Metav Werkzeuge or consult the team for application advice. Schaftfräser for LNMX 0402 Indexable Inserts — 12 mm shank, internal coolant (Teknik Makina) A Schaftfräser for LNMX 0402 Indexable Inserts designed as a coolant-fed shank milling cutter for precise, high‑productivity indexable-insert milling in compact toolholders Compatible with LNMX 0402 indexable inserts 12 mm shank for compact toolholders Internal coolant for improved chip evacuation Three cutting edges for efficient material removal Precise, coolant-fed indexable milling for shop floors The Shaft milling cutter delivers a rational approach to indexable milling: by accepting LNMX 0402 inserts and supplying internal coolant, the tool maintains consistent cutting conditions and reduces thermal distortion. The compact 12 mm shank and the cutter's balanced geometry make it suitable for constrained setups where runout tolerance and secure clamping are essential. This construction supports predictable tool life and process stability, helping to keep machining cycles steady and rework rates low. Productivity through geometry and quick insert service With three cutting edges and a 40 mm cutting length, the tool combines material removal efficiency with controlled chip formation. The 150 mm overall length provides reach without excessive overhang, while the indexable system enables rapid insert changes using the specified fasteners. The included Torx fastening specification (M1.8x4.1 screw, T6 key) ensures secure seating of inserts and straightforward maintenance, reducing downtime and enabling fast turnarounds in serial production. Compact handling, repeatable performance Weighing just 0.11 kg, the cutter is easy to handle during setup and contributes to reduced spindle load in smaller CNC machines. Compatibility with Korloy LNMX 0402 inserts offers access to a wide range of grade and geometry options, so the same shank cutter can be adapted across materials and tasks by changing insert grade rather than the whole tool. The result is a flexible, cost‑effective solution for workshops and production cells seeking high repeatability. Serviceability and process integration The indexable design simplifies inventory and tool management: only a small number of insert types are required to cover varied tasks, and internal coolant routing supports cleaner chip evacuation and longer insert life. For procurement and process planning, the cutter’s straightforward specification and Korloy compatibility allow rapid integration into existing tool families. Metav’s European stock and technical advisory help to ensure reliable supply and correct selection for specific machining needs. Contact Metav Werkzeuge today for stock availability, technical matching and ordering of the Teknik Makina shaft milling cutter (SKU S088TM) — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S088TM Product: Shaft milling cutter for LNMX 0402 indexable inserts Manufacturer: Teknik Makina Core dimensions Diameter: 12 mm Shank diameter: 12 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 3 Weight: 0.11 kg Torx screw: M1.8x4.1 Torx key: T6 Features Internal coolant Compatible with Korloy LNMX 0402 inserts Indexable insert system Label: 12 mm shank milling cutter LNMX 0402 L150 mm with internal coolant FAQ Is this cutter compatible with Korloy inserts? The Teknik Makina shaft milling cutter S088TM is compatible with Korloy LNMX 0402 indexable inserts and accepts standard LNMX 0402 geometries. Does the tool provide internal coolant? Yes, the S088TM features internal coolant to improve chip evacuation and thermal control at the cutting zone. What are the main dimensions of the cutter? Shank and diameter: 12 mm; cutting length: 40 mm; overall length: 150 mm. How many cutting edges does the tool have? The cutter uses three cutting edges for a balance of material removal rate and surface regularity. Which fastening components are required for the inserts? Inserts are secured with an M1.8x4.1 Torx screw and a T6 Torx key, as specified for the S088TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter For APKT 1003 Indexable Inserts With Internal Cooling, 32mm Shank - Teknik Makina
Combining a 32 mm shank, internal coolant and compatibility with APKT 1003 indexable inserts, this milling body delivers the rigidity and cooling necessary for consistent high-volume machining. Benefit from stable cutting performance and reduced insert wear; order directly via Metav Werkzeuge or contact our consultants for application support. 32 mm shank cutter S181-1TM – for APKT 1003 indexable inserts, internal coolant (Teknik Makina) The 32 mm shank cutter S181-1TM is a robust indexable milling body designed for demanding face and profile milling operations where stability and effective cooling are essential. 32 mm shank diameter Internal coolant supply Compatible with APKT 1003 inserts 4 cutting edges, 45 mm cutting length Stability and rigidity for reliable machining With a 32 mm shank and an overall length of 150 mm, this milling body provides improved torsional stiffness compared with slimmer alternatives. The heavier construction, at 0.916 kg, reduces vibration and supports higher metal removal rates while maintaining surface quality. For production environments where cycle time and repeatability matter, the reinforced design contributes to consistent tool life and predictable part tolerances. Direct cooling and insert compatibility to extend tool life The integrated internal coolant channel directs cutting fluid precisely to the cutting zone, enhancing chip evacuation and thermal control. This targeted cooling helps to preserve edge geometry and extend the life of APKT 1003 indexable inserts, especially under interrupted cuts. Compatibility with Korloy inserts offers flexibility for a wide range of grades and coatings, enabling optimisation for speed, feed and workpiece material. Fast serviceability and shop-floor practicality Designed for efficient indexable insert changes, the tool uses a M2.5x5.5 fixing screw and a T8 Torx key for secure, repeatable clamping. The four-cutting-edge configuration with a 45 mm cutting length balances removal capacity with insert economy, reducing downtime associated with frequent tool changes. The modular nature of the milling body simplifies maintenance and inventory planning in busy workshops. Contact Metav Werkzeuge for tailored machining advice on Teknik Makina tools—call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability, lead times and recommended insert grades Technical data SKU: S181-1TM Product label: 32 mm shank cutter for APKT 1003 L150 mm with internal coolant Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 32 mm Overall length: 150 mm Cutting length: 45 mm Cutting edges: 4 Weight: 0.916 kg Special features / Versions Internal coolant For APKT 1003 indexable inserts Compatible with Korloy inserts Fixing screw: M2.5x5.5 Torx key: T8 FAQ Is this cutter suitable for general-purpose face milling? This shank cutter is designed for face and profile milling tasks; the S181-1TM performs well in general-purpose operations where indexable APKT 1003 inserts are appropriate. Which inserts fit the tool and are any brands recommended? The milling body accepts APKT 1003 indexable inserts and is compatible with Korloy variants; selection of grade and coating should match the workpiece material and cutting conditions. How does internal coolant benefit the cutting process? Internal coolant delivers fluid directly to the cutting edge, improving chip removal and temperature control, which in turn helps to extend insert life and maintain consistent surface finish. What is the cutting length and how does it affect application choice? The tool offers a 45 mm cutting length, balancing material removal capacity with rigidity; it is suitable for operations that require moderate axial engagement without excessive overhang. What tools are needed for insert changes and fastening? Insert clamping uses an M2.5x5.5 screw tightened with a T8 Torx key for secure and repeatable assembly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter For APXT 1003 Indexable Inserts 3 Flute 90° Cut, 22mm Dia, 60mm Cutting Length - Teknik Makina
Take advantage of the combination of rapid insert changes, consistent clamping and proven machining geometry for reliable milling cycles — order the tool via Metav Werkzeuge or consult our product specialists for tailored recommendations. Shank Milling Cutter S178TM — 22 mm cutter, 3‑flute, for APXT 1003 indexable inserts (Teknik Makina) The Shank Milling Cutter S178TM is an indexable‑insert milling tool engineered for general machining tasks where quick insert replacement and stable clamping are essential 22 mm cutting diameter 3 cutting edges for balanced cuts 20 mm shank for secure clamping Compatible with APXT 1003 Korloy inserts Faster setup and repeatable results for production runs The Shank Milling Cutter S178TM brings measurable process advantages through an indexable‑insert design that reduces downtime during tool changes. With a 22 mm cutting diameter and 3 cutting edges, the cutter offers stable engagement and predictable chip volumes, which translates into shorter setup times and consistent cycle times on CNC machines. The use of standard inserts means repeatability is driven by insert geometry rather than whole‑tool regrinds, so production batches remain uniform and inspection results more reliable. Secure clamping and mechanical stability for accurate cuts A solid shank profile with a 20 mm diameter and a total length of 150 mm provides rigidity where it matters, reducing deflection under load. The overall mass of 0.36 kg supports controlled dynamics at typical spindle speeds, while the robust clamping system — secured with a Torx M2.5x5.5 screw tightened with a T8 key — ensures the insert seat remains stable during interrupted cuts. These characteristics minimise vibration, protect tool life and preserve workpiece tolerances. Controlled chip flow and flexible machining options The tool’s 60 mm effective cutting length and a 90° cutting angle are configured for a balance between material removal and surface finish. The three‑flute geometry promotes efficient chip evacuation, reducing heat build‑up and enabling a wider window of cutting parameters for mixed workloads. Compatibility with APXT 1003 indexable inserts — supplied by Korloy — allows straightforward selection of grades and coatings to match workpiece requirements without changing the holder. Cost‑effective maintenance and workshop reliability Designed for straightforward insert replacement, the cutter reduces consumable waste and simplifies inventory: only the inserts need regular replenishment, not the entire tool body. The indexable system supports predictable tooling costs and easier tool‑room management, while the choice of established insert sizes keeps sourcing simple. For workshops seeking dependable down‑time reductions, this holder is a pragmatic addition to an existing tooling strategy. For precision milling with Teknik Makina components, contact Metav Werkzeuge for product matching and supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application fit and availability Technical Data Article number: S178TM Brand: Teknik Makina Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T8 Facts Cutting diameter: 22 mm Shank diameter: 20 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.36 kg Special features Indexable‑insert shank milling cutter Designed for APXT 1003 indexable inserts Secure insert clamping with Torx screw Suitable for quick insert changes and series production FAQ What insert type does this cutter use? The cutter uses APXT 1003 indexable inserts, compatible with common Korloy grades for a range of applications. Is the clamping screw specification included and what key is required? Yes; the holder uses a Torx M2.5x5.5 screw and requires a T8 key for secure tightening. What are the principal dimensions that affect machine setup? Key dimensions are the 22 mm cutting diameter, 20 mm shank diameter and 150 mm overall length; these determine holder clearance and suitable collet or chuck choice. Can the S178TM be used for both roughing and finishing operations? Yes; the three‑flute geometry and 60 mm cutting length allow the S178TM to be applied for heavier material removal as well as for finishing passes when paired with the appropriate APXT 1003 insert grade. Who supplies the S178TM and where can further product details be found? The tool is offered by Teknik Makina and supplied through Metav Werkzeuge; Metav can advise on insert grades, stock and delivery options. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter For BDMT 11T3 Indexable Inserts With Internal Coolant, 20mm Shaft - Teknik Makina
Reliable milling performance with internal coolant and compatibility with BDMT 11T3 indexable inserts ensures consistent chip control and extended tool life. The 20 mm shank and 150 mm overall length deliver the stability and reach required for versatile workshop tasks. Order the end mill directly via Metav Werkzeuge or ask our consultants if needed. End mill for BDMT 11T3 indexable inserts — 20 mm shank, internal coolant (Teknik Makina) The End mill is an indexable-insert cutter designed for industrial milling applications where fast insert changes, coolant-through capability and shank rigidity are required. Internal coolant supply for improved chip evacuation Compatible with BDMT 11T3 inserts (Kyocera) 20 mm shank, 150 mm overall length Three cutting edges for stable material removal Consistent cutting performance with coolant-through design The internal coolant channel keeps the cutting zone flushed, reducing heat and improving chip evacuation for longer insert life and more predictablecycle times. Built with a 20 mm shank, the cutter minimises runout and vibration, which translates into better surface finish and repeatable tolerances when working on batch production. As an indexable-insert solution, the tool accepts BDMT 11T3 inserts, enabling rapid insert rotation or replacement without reclamping the tool body — a clear efficiency advantage in industrial environments. Fast maintenance and secure insert clamping for uptime Three cutting edges deliver a balance between material removal rate and cutting stability, while the screw and key system simplifies maintenance. The clamping uses a Torx T8 key and an M2.5x5.5 screw for reliable insert fixation and simple service routines. Indexable inserts eliminate the need for resharpening; instead, worn edges are replaced in seconds, reducing downtime and keeping the production line moving. This translates into measurable productivity gains for shops that value throughput and predictable tooling costs. Versatile reach and practical handling for workshop applications With a 150 mm overall length and a 50 mm cutting length, this shank cutter provides reach for shoulder milling and contour work without compromising stiffness. The compact mass of 0.351 kg aids in dynamic balance and reduces toolholder stress during high-speed passes. Compatibility with Kyocera BDMT 11T3 inserts permits flexible selection of grades and geometries for aluminium, steel or versatile general-purpose applications, making the cutter suitable for both jobbing shops and production cells that require quick adaptability. For purchase enquiries or a technical specification review, contact Metav Werkzeuge in Emmerich — Metav IndustryLine specialists will advise on insert grades, clamping torque and application fitment; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: S567-1TM Manufacturer: Teknik Makina Product type: End mill for indexable inserts Facts Diameter: 20 mm Overall length: 150 mm Weight: 0.351 kg Shank diameter: 20 mm Cutting length: 50 mm Cutting edges: 3 eClass: 21180806 Special features Internal coolant: yes Compatible inserts: BDMT 11T3 Insert manufacturer: Kyocera Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this cutter? The cutter accepts BDMT 11T3 indexable inserts; compatible grades from Kyocera can be selected depending on the workpiece material and required surface finish. Is the tool coolant-through? Yes, the end mill is equipped with internal coolant supply for enhanced chip control and thermal management at the cutting edge. What is the shank diameter and overall length? The tool has a 20 mm shank and a 150 mm overall length, providing a good balance of stiffness and reach for general milling tasks. How many cutting edges does it have and what does that mean for productivity? The cutter features three cutting edges, which combine reliable material removal with stable cutting forces; this supports higher feed rates while maintaining surface quality. Which screw and key are required for insert clamping? Insert clamping uses an M2.5x5.5 screw tightened with a Torx T8 key for secure and repeatable fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter For BDMT 11T3 Indexable Inserts, 3 Flutes, 90° Cutting Angle, 50mm Cutting Length - Teknik Makina
Take advantage of a robust combination of compatibility with BDMT 11T3 indexable inserts, a 20 mm shank for stable clamping and a 50 mm cutting length for deeper engagement — all designed to keep production consistent and efficient; order via Metav Werkzeuge or consult our specialists for configuration advice. Teknik Makina S567TM End mill — 20 mm shank, 50 mm cutting length (for BDMT 11T3 indexable inserts) The S567TM end mill is a shank cutter engineered for indexable turning inserts, intended for stable milling and reliable setup in CNC and milling centres across metalworking workshops. 20 mm shank diameter for secure clamping 50 mm cutting length for deeper passes Compatible with BDMT 11T3 indexable inserts (Kyocera) Consistent performance with indexable inserts for productive machining This shank cutter places emphasis on repeatable results by accepting BDMT 11T3 indexable inserts, which simplify insert changes and reduce downtime. The combination of a 20 mm shank and a balanced tool length gives a stable toolholder interface that minimises chatter and vibration. For operations where cycle time matters, the use of indexable inserts allows maintenance of cutting performance without full tool replacement, supporting continuous production and predictable component quality. Stability and process reliability on the shop floor Designed for robust machining, the tool’s 50 mm cutting length and three cutting edges deliver an efficient material removal rate while maintaining surface integrity. The 90° cutting geometry provides reliable face engagement and consistent shoulder finishes. These characteristics translate directly into process advantages: fewer interruptions for regrinding, shortened set-up times and improved repeatability across batches — elements that contribute to lower unit costs and higher throughput in series production. Simple clamping and secure assembly for fast maintenance Assembly and maintenance are straightforward thanks to the supplied fastening system: a Torx screw (M2.5x5.5) secured with a T8 key ensures a firm and precise seat for each insert. The standardised fastening reduces the risk of incorrect torque and supports consistent tool life. Quick insert changes and predictable torque requirements help maintain machine uptime and make the cutter suitable for workshops aiming to streamline tool management without complex procedures. Application scope and material guidance The cutter is intended for use with BDMT 11T3 indexable inserts and is specified as compatible with Kyocera insert geometries, making it suitable for a broad range of roughing and semi-finishing tasks on typical engineering materials. The combination of shank diameter, cutting length and three-edge insert support lends itself to tasks where stability and controlled chip removal are priorities. For specific feed and speed recommendations, consult tooling data for the chosen insert grade to match the material and machining strategy. For reliable production results with the Teknik Makina S567TM and tailored advice from Metav Werkzeuge, contact our consultants in Emmerich for configuration and supply guidance. Technical Data SKU: S567TM Manufacturer: Teknik Makina Product: End mill for BDMT 11T3 indexable inserts Compatible inserts: BDMT 11T3 Compatible insert manufacturer: Kyocera Torx screw: M2,5x5,5 Torx key: T8 Core dimensions Shank diameter: 20 mm Cutting length: 50 mm Overall length: 150 mm Diameter: 20 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.351 kg Features For BDMT 11T3 indexable inserts Compatible with Kyocera inserts Torx screw fastening M2.5x5.5 Torx key size T8 Shank-type end mill configuration FAQ Which inserts fit this cutter? The cutter accepts BDMT 11T3 indexable inserts; it is specified as compatible with Kyocera geometries for that insert designation. What are the key dimensions to check for machine setup? Key dimensions are the 20 mm shank diameter, 50 mm cutting length and 150 mm overall length which determine clamping requirements and reach. How many cutting edges does the tool support and what is the cutting angle? The tool is configured for three cutting edges and a 90° cutting angle providing stable engagement and predictable finishing on shoulders. What fastening hardware is required for insert mounting? Insert retention uses a Torx screw (M2.5x5.5) tightened with a T8 key to secure each insert correctly. Is this tool suitable for heavy roughing passes? The tool’s shank and cutting length deliver good stability for heavier passes when combined with appropriate insert grades and machine rigidity, enabling efficient roughing strategies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter For BLMP 0603 Indexable Inserts With Internal Coolant, 3 Flutes - Teknik Makina
Take advantage of the combination of robust compatibility with BLMP 0603 indexable inserts, reliable internal coolant and a compact 21 mm cutting diameter for consistent milling performance. The stable 20 mm shank and straightforward clamping system reduce vibration and downtime. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter for BLMP 0603 indexable inserts — Teknik Makina, 21 mm, internal coolant A Teknik Makina shank milling cutter designed for precision milling with BLMP 0603 indexable inserts, offering through‑coolant capability for improved chip evacuation and longer insert life. Compact 21 mm cutting diameter Integrated internal coolant supply Compatible with Taegutec BLMP 0603 inserts 20 mm shank for stable clamping Precision milling with fewer interruptions The shank milling cutter combines a compact 21 mm diameter with a replaceable insert system to deliver repeatable results in series machining. Using BLMP 0603 indexable inserts means that cutting edges can be changed quickly without regrinding the body, which lowers cycle-time losses and keeps machines productive. The internal coolant channel supplies lubricant directly to the insert seat, supporting better chip control and potentially extending insert life; this is particularly advantageous in continuous production where consistent surface finish and reduced rework are priorities. Stable toolholding for improved surface quality A generous 20 mm shank and a 150 mm overall length provide the rigidity needed for accurate side‑milling operations. The cutter features 3 cutting edges, a balance that optimises material removal while maintaining a good surface finish. Fast and secure insert clamping uses a Torx T8 key and M3x6,2 screws, ensuring predictable torque and minimised risk of loosening under load. The compact mass (0.348 kg) keeps centrifugal forces low, which helps to reduce chatter and improves dimensional stability on long runs. Built for workshop and production environments Designed to accept standard BLMP 0603 inserts and to work with inserts from Taegutec, this cutter is suitable for a wide range of milling tasks where indexable tooling is preferred for economic reasons. Its configuration supports efficient tool management: fewer full‑body replacements, fast insert changes and compatibility with widely available insert grades. For procurement and planning, the tool is listed as S479-5TM, making it straightforward to identify within stock systems and tooling lists. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina shank milling cutter S479-5TM with existing tool holders and production processes — local stock and technical consultancy are available from our Emmerich location. Technical Data SKU: S479-5TM Manufacturer: Teknik Makina ECLASS: 21180806 Facts Cutting diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting length: 40 mm Weight: 0.348 kg Number of cutting edges: 3 Torx key: T8 Torx screw: M3x6,2 Special features Internal coolant For BLMP 0603 indexable inserts Compatible with Taegutec inserts Label: 21mm Schaftfräser BLMP 0603 L150mm mit Innenkühlung Product type: Shank milling cutter FAQ Which inserts fit this cutter? The cutter accepts BLMP 0603 indexable inserts; compatibility with Taegutec insert grades is specified for the S479-5TM. Is there a coolant provision? Yes — the tool includes an internal coolant channel that delivers fluid to the insert seat for improved chip evacuation. What clamping hardware is required for inserts? Insert clamping uses Torx screws M3x6,2 tightened with a Torx T8 key; this provides consistent clamping for the BLMP 0603 inserts. Which shank holders are suitable? The 20 mm shank fits standard 20 mm collets and tool holders designed for shank milling cutters; ensure the holder provides appropriate runout and clamping force. How many cutting edges does the tool have and what is the benefit? The tool has three cutting edges, a compromise that supports steady material removal rates while helping to maintain a good surface finish on workpieces. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter for LNMU 0303 Indexable Inserts 17mm Shank With Internal Coolant - Teknik Makina
Take advantage of internal coolant and proven indexable insert compatibility for consistent small-diameter milling. The combination of stable shank geometry, a 17 mm cutter diameter and secure Torx clamping ensures reliable repeatability in batch work; order directly via Metav Werkzeuge or consult our specialists for application support. Shank milling cutter S672-1TM – 17 mm, internal coolant, for LNMU 0303 indexable inserts (Teknik Makina) Shank milling cutter S672-1TM is an indexable insert milling solution designed for precise finishing and efficient material removal with LNMU 0303 inserts, featuring an internal coolant channel to improve chip evacuation and tool life. Internal coolant for stable cutting Compatible with LNMU 0303 inserts 17 mm cutter diameter, 16 mm shank High cooling efficiency and insert compatibility for longer tool life The combination of an internal coolant channel and support for LNMU 0303 indexable inserts reduces heat at the cutting edge and improves chip control, which in turn extends insert life and stabilises surface quality. Indexable inserts make it possible to replace only the cutting tip rather than the complete cutter, lowering running costs and shortening machine downtimes. The design is also Tungaloy compatible, ensuring broad availability of cutting grades and geometries for different machining tasks. Stable geometry and secure clamping for consistent performance A compact geometry with a 17 mm diameter and a 16 mm shank provides rigidity in small-diameter milling, while a 40 mm cutting length and 150 mm overall length balance accessibility and stability. The tool has two cutting edges, optimised for even load distribution and efficient chip removal. Assembly is secured with a Torx T8 key and M2.5x7 Torx screw, ensuring repeatable clamping torque and minimising the risk of loosening during operation. The light weight (0.241 kg) aids handling without compromising stiffness. Practical advantages for workshop productivity and supply reliability Designed for routine production and maintenance environments, the shank cutter supports fast insert changes and predictable process behaviour, helping to reduce cycle-time variability. With Metav’s supply chain from Emmerich, access to replacement inserts and tool variants is straightforward, backed by decades of distribution experience. The cutter’s simple interface and standardised clamping mean fewer special tools are required, which reduces inventory complexity and supports a consistent production flow. Contact Metav Werkzeuge for tailored recommendations on Teknik Makina shank milling cutters and compatibility with Tungaloy LNMU 0303 inserts; our specialists in Emmerich provide application guidance and supply assurance Technical data SKU: S672-1TM Product: Shank milling cutter Manufacturer: Teknik Makina Facts Cutter diameter: 17 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length: 40 mm Cutting edges: 2 Weight: 0.241 kg Special features Internal coolant Compatible with LNMU 0303 indexable inserts Suitable for Tungaloy inserts Torx key T8 for assembly Torx screw M2.5x7 FAQ Which insert type fits this cutter? The cutter accepts LNMU 0303 indexable inserts; the S672-1TM is specified for that insert family and supports common grades from suppliers such as Tungaloy. Is the cutter supplied with the fastening screw and key? The S672-1TM uses an M2.5x7 Torx screw and a T8 Torx interface for secure clamping; check the delivery contents at purchase for included assembly items. Does the tool have through-coolant capability? Yes, the shank milling cutter features internal coolant, which directs cutting fluid towards the insert zone to improve cooling and chip control. What applications suit this shank cutter? The cutter is intended for indexable-insert milling tasks where compact diameter and reliable insert changes are priorities; it is well suited to both finishing and light roughing operations. Which manufacturer produces this tool and who is responsible for supply? This milling cutter is produced by Teknik Makina (Teknik Cutting Tools) and supplied in Europe through Metav Werkzeuge; refer to SKU S672-1TM for ordering and compatibility checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter For LNMX 0402 Indexable Inserts With Internal Coolant, 10mm Shank - Teknik Makina
Take advantage of the combination of internal coolant, a 10 mm shank and compatibility with LNMX 0402 indexable inserts for efficient chip control and reduced tool-change downtime; order the cutter directly via Metav Werkzeuge or consult our specialists for application matching. 10 mm Shank End Mill S086TM — for LNMX 0402 indexable inserts, internal coolant (Teknik Makina) The 10 mm Shank End Mill S086TM is a compact milling tool engineered for use with LNMX 0402 indexable inserts, offering internal coolant supply for improved heat control and consistent cutting performance in production and workshop environments. 10 mm shank for compact holders Internal coolant for efficient chip evacuation Compatible with LNMX 0402 Korloy inserts 150 mm overall length for deeper reach Higher throughput through targeted cooling and geometry The S086TM combines a 10 mm shank with an integrated internal coolant feed and a cutting length of 40 mm, which together support stable cutting conditions and prolonged insert life. The internal coolant channel directs lubricant and coolant precisely to the cutting zone, reducing thermal load and improving chip evacuation. With two cutting edges, the tool balances radial cutting forces and surface finish, making it a pragmatic choice where cycle-time improvements and predictable tool life are required. The compact shank design also helps to minimise vibration in shorter overhangs, enhancing process reliability. Minimise downtime with standardised inserts and fast clamping Designed for LNMX 0402 indexable inserts, compatible with Korloy grades, this cutter simplifies inventory and changeover. Indexable inserts allow swift replacement without full tool regrinding, which reduces machine downtime and lowers total machining cost per component. The standardised insert format supports a broad choice of grades and geometries for finishing or semi-finishing operations, giving flexibility across small-batch runs and repetitive production alike. Compatibility with commonly available inserts makes aftermarket sourcing straightforward and cost-effective. Practical design for secure fixing and serviceability The cutter features a clear clamping solution with a Torx fastening system: Torx T6 key and a screw specification M1,8x4,1. This arrangement ensures precise seating of each LNMX 0402 insert and easy repeatable tightening torque, supporting consistent cutting conditions from insert to insert. The tool’s 150 mm overall length provides reach where required while the modest mass (0.07 kg) keeps handling simple during tool changes. The internal coolant channel also reduces the need for external coolant adjustments, supporting cleaner setups and simpler maintenance routines. Integration into workshop workflows and selection advice With a 10 mm shank diameter, the cutter fits standard 10 mm tool holders, enabling quick integration into existing tooling systems. The combination of internal coolant and indexable inserts makes the tool particularly suitable for medium-duty slotting and peripheral milling where controllable chip flow and short set-up times matter. For optimal results, pair the cutter with insert grades recommended for the intended material and ensure the coolant pressure and delivery are configured to reach the tool’s internal feed. The SKU S086TM simplifies reorders and internal logging when standardising tooling across multiple machines. Contact Metav Werkzeuge for technical matching and immediate availability of the S086TM end mill; our specialists in Emmerich will advise on insert grades, holder selection and delivery – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: S086TM Product type: End mill (shank cutter) Manufacturer: Teknik Makina Compatible inserts: LNMX 0402 (Korloy) Internal coolant: Yes Torx key: T6 Torx screw: M1,8x4,1 Facts Shank diameter: 10 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.07 kg eCl@ss: 21180806 Special features Internal coolant feed Compatible with LNMX 0402 Korloy inserts Torx T6 fastening system Compact 10 mm shank for standard holders FAQ Which inserts fit this cutter? The S086TM is designed for LNMX 0402 indexable inserts; the cutter is specified for inserts from Korloy and other suppliers offering the LNMX 0402 format. Does the tool provide through-coolant capability? Yes, the S086TM features internal coolant to deliver coolant directly to the cutting edge, improving chip evacuation and thermal control during milling. What holder size is required for the cutter? The cutter has a 10 mm shank and is intended for standard 10 mm tool holders; the compact shank supports straightforward integration into existing tooling systems. How are the inserts fastened and serviced? Inserts are secured with a Torx screw (M1,8x4,1) tightened using a Torx T6 key, allowing repeatable clamping and quick insert changes for reduced uptime. What is the overall length and cutting length of the tool? The S086TM has a 150 mm overall length and a 40 mm cutting length, providing reach for deeper cuts while maintaining rigidity for stable milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter For LNMX 1004 Indexable Inserts With Internal Cooling, 25mm Shank - Teknik Makina
Take advantage of the 25 mm shank and internal coolant to achieve stable, high‑productivity milling with LNMX 1004 indexable inserts; the combination of a rigid 25 mm body and three cutting edges promotes consistent surface quality and longer tool life. Order the shank cutter directly via Metav Werkzeuge or ask our consultants if needed. Indexable shank cutter S093TM by Teknik Makina — 25 mm shank, internal coolant A robust shank milling cutter S093TM designed for machining with LNMX 1004 indexable inserts and optimised for through‑coolant operations. 25 mm shank diameter for stable clamping Internal coolant supply for improved tool life Compatible with LNMX 1004 Korloy indexable inserts Three cutting edges for efficient material removal Greater rigidity for consistent cuts and higher metal removal rates The solid 25 mm shank and compact overall length deliver improved rigidity, reducing chatter during heavy milling passes. With three cutting edges and a 70 mm cutting length, the tool balances material removal rate and surface finish, which helps maintain part tolerances in repetitive production. This configuration is particularly effective where stable clamping and predictable tool behaviour are priorities, resulting in fewer reworks and more predictable cycle times. Through‑coolant design reduces heat and eases chip control An integrated internal coolant channel directs cutting fluid to the cutting zone, improving chip evacuation and reducing thermal load on the insert seats. The result is slower wear on insert rims and extended intervals between index changes. Fixing is secured with an M4x10 screw tightened with a T15 Torx key, simplifying maintenance and insert replacement while keeping downtime to a minimum. These features contribute to reliable tool life and lower process variation in longer shifts. Compatibility that simplifies tooling and inventory management Designed to accept LNMX 1004 indexable inserts from Korloy, this tool body fits established insert inventories and thread standards, helping to reduce the number of unique tooling items stored. The standardised screw size and Torx interface support rapid insert changes and straightforward service routines. Clear identification with SKU S093TM supports traceability across tool lists and tool‑management systems, aiding purchasing and production planning. Choose Teknik Cutting Tools’ S093TM shank cutter for reliable indexable milling — contact Metav Werkzeuge for tailored advice and fast supply from Emmerich. Technical Data SKU: S093TM Product type: Shank cutter For inserts: LNMX 1004 Compatible insert manufacturer: Korloy Manufacturer: Teknik Makina Facts Shank diameter: 25 mm Overall length: 150 mm Cutting length: 70 mm Weight: 0.46 kg Cutting edges: 3 Screw: M4x10 Torx key: T15 ECLASS: 21180806 Special features Internal coolant Compatible with LNMX 1004 indexable inserts Three cutting edges SKU identification S093TM Torx T15 screw interface FAQ Which insert type fits this cutter? The cutter is designed for LNMX 1004 indexable inserts; compatibility is specified for Korloy inserts and the body accepts that insert form for reliable seating. Is the tool equipped for through‑coolant machining? Yes, the tool body features internal coolant, which enhances chip evacuation and reduces thermal stress at the cutting edge. What fastening hardware is required for insert installation? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is used for tightening and replacement. How many cutting edges does the cutter have and what is the cutting length? The tool has three cutting edges and a cutting length of 70 mm, offering a balance between material removal and surface quality. What is the product identification for orders and tool lists? Please refer to SKU S093TM when ordering or recording the tool in management systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter For LOGU 0303 Indexable Inserts 26mm Diameter, 4 Flutes - Teknik Makina
High rigidity, precise insert compatibility and a compact profile make this cutter a reliable choice for demanding milling operations; the 26 mm diameter and 25 mm shank ensure stable clamping and consistent results. Combine the compatibility with LOGU 0303 indexable inserts and the four cutting edges for efficient material removal. Order the S681TM directly via Metav Werkzeuge or consult our specialists for tailored technical advice. Shank milling cutter S681TM — 26 mm diameter, for LOGU 0303 indexable inserts (Teknik Makina) Shank milling cutter S681TM optimised for reliable slotting and face operations with LOGU 0303 indexable inserts in industrial machining environments 26 mm cutting diameter Compatible with LOGU 0303 inserts Shank Ø 25 mm for secure clamping Four cutting edges for smooth finish Total length 150 mm for deeper reach Consistent rigidity and repeatable accuracy for production work The S681TM cutter is designed to deliver consistent rigidity thanks to its 25 mm shank and balanced geometry, which reduces vibration and improves surface quality. A rigid shank diameter combined with the tool’s length-to-diameter ratio supports repeatable positioning in the spindle and helps to maintain tool life under continuous use. For workshops aiming to increase first-pass yield, this stability translates into fewer reworks and a steadier output. Insert system and serviceability that reduce downtime Using the LOGU 0303 indexable inserts allows fast edge changes without regrinding, minimising setup time. The cutter accepts inserts from Kyocera, ensuring broad availability of grades and geometries for different materials. The clamping arrangement and the Torx fixture details facilitate quick replacement of the cutting edges; this modular approach simplifies tool management in mixed-production environments and supports rapid turnaround between batches. Practical performance details and application fit With four cutting edges and a 150 mm overall length, the tool balances cutting capacity and reach for common milling tasks. The 60 mm cutting length supports shoulder and light slotting operations while the cutter’s geometry is suited to general milling of steel and non-ferrous alloys where indexable inserts are preferred. Weight and dimensions contribute to ease of handling and safe insertion in toolholders, while the standard Torx connections ensure compatibility with common fasteners used in industrial toolrooms. Contact Metav Werkzeuge for delivery options, technical matching and to discuss the Teknik Makina S681TM shank milling cutter with LOGU 0303 compatibility Technical data SKU: S681TM Label: 26 mm shank milling cutter for LOGU 0303, L150 mm Product type: Shank milling cutter Manufacturer: Teknik Makina Facts Cutting diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length: 60 mm Number of cutting edges: 4 Weight: 0.359 kg Torx key: T8 Torx screw: M3x7 eClass: 21180806 Special features Designed for LOGU 0303 indexable inserts Compatible with Kyocera insert manufacturers Four cutting edges for stable material removal Shank design for secure clamping and repeatability FAQ Which inserts fit this cutter? The S681TM from Teknik Makina is designed for LOGU 0303 indexable inserts and is compatible with Kyocera-manufactured LOGU 0303 grades. What are the key dimensional requirements for the toolholder? A toolholder able to accept a 25 mm shank and accommodate a 150 mm overall length is required for correct mounting of the S681TM. What operations is this cutter best suited to? This shank milling cutter is suited to face milling and light slotting where indexable inserts are preferred for quick edge changes and consistent finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Cutter for LOGU 0303 Indexable Inserts With Internal Coolant, 3 Flutes, 20mm Shank - Teknik Makina
Take advantage of the 20 mm shank and internal coolant to improve stability and tool life in demanding milling operations; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Shaft milling cutter S678-1TM – 20 mm shank, internal coolant (Teknik Makina) Shaft milling cutter S678-1TM designed for indexable machining using LOGU 0303 inserts, ideal for slotting and face milling in production and workshop environments 20 mm shank diameter Internal coolant supply Compatible with LOGU 0303 inserts Three cutting edges for stable machining Higher productivity through secure clamping and stable geometry The tool combines a 20 mm shank with a compact overall length to deliver rigid machining even under moderate radial loads. This geometry reduces vibration and improves surface finish when compared with less rigid cutters, translating into higher feed rates or longer insert life. With its three cutting edges, the cutter provides a balanced cutting action that reduces chatter and supports consistent material removal, making it suitable for repeatable operations in small-batch and serial production. Controlled cooling for longer insert life and better chips evacuation An integrated internal coolant channel directs lubricant precisely to the cutting zone, assisting with heat dissipation and chip control. Delivering coolant close to the cutting edge lowers thermal load on the insert, which helps maintain edge integrity and extend service intervals. The holder accepts LOGU 0303 indexable inserts (Kyocera-compatible), enabling quick insert replacement without regrinding and reducing downtime in the workshop. Practical design for fast tool changes and predictable results A defined 60 mm cutting length and an overall length of 150 mm provide a useful reach while keeping tool overhang manageable for stable results. Insert clamping uses an M3x7 screw with Torx T8 drive for secure seating and straightforward maintenance. At roughly 0.356 kg, the assembly is easy to handle on the bench or in tool racks. For operations that prioritise uptime and reproducible quality, this indexable cutter offers a low-maintenance alternative to solid tools while keeping machining economics under control. For reliable indexable milling with internal coolant, contact Metav Werkzeuge to discuss the Teknik Makina shaft milling cutter S678-1TM and ensure the tool matches the intended application Technical data Article number: S678-1TM Manufacturer: Teknik Makina Product type: Shaft milling cutter Label: 20 mm shaft milling cutter LOGU 0303 L150 mm with internal coolant Core specifications Diameter: 20 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 60 mm Number of cutting edges: 3 Weight: 0.356 kg Torx screw: M3x7 Torx key: T8 Internal coolant: yes ECLASS: 21180806 Materials & compatibility Compatible with LOGU 0303 indexable inserts Insert manufacturer compatibility: Kyocera Indexable insert mounting M3x7 (Torx T8) Designed for slotting and face milling applications FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; the tool holder is compatible with Kyocera-style LOGU 0303 inserts for fast replacement. Is internal coolant routed through the shank? Yes, the tool features internal coolant delivery to the cutting zone to aid heat control and chip evacuation. What is the shank and overall length of the tool? The holder has a 20 mm shank and an overall length of 150 mm with a 60 mm cutting length. How are the inserts secured? Inserts are clamped with an M3x7 screw driven by a Torx T8, ensuring secure seating and straightforward maintenance. Is this cutter suitable for production workshops? The cutter is designed for repeatable milling tasks in both workshop and small production settings, offering a balance of rigidity, coolant control and quick insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter Head For APKT 1705 Indexable Inserts, 3 Flutes, 60mm Cutting Length - Teknik Makina
Take advantage of a rigid 32 mm shank and quick-change APKT 1705 compatibility to reduce cycle times and maintain consistent surface quality. Order the shaft milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Shaft Milling Cutter S662TM — 32 mm shank, for APKT 1705 indexable inserts (Teknik Makina) Shaft Milling Cutter S662TM provides a robust holder for indexable machining, designed for secure clamping and reliable repeatability in production environments 32 mm shank for high rigidity Compatible with APKT 1705 indexable inserts Three cutting edges for balanced cutting M4x10 Torx screw and T15 key included Stable clamping for predictable production results The holder's 32 mm shank and overall length of 150 mm deliver the rigidity required for repeatable machining. A rigid tool body reduces vibration and tool deflection, which in turn preserves cutting-edge geometry and extends insert life. The tool's mass (approximately 0.85 kg) helps dampen chatter in medium-duty applications, so runout and surface finish remain consistent across batches. These attributes support higher process reliability and lower scrap rates in series production. Fast insert changes and secure fastening minimise downtime Designed for APKT 1705 indexable inserts, the tool uses a standard M4x10 Torx screw and T15 key for insert clamping. The use of indexable inserts allows economical replacement of cutting edges without removing the holder from the spindle, shortening maintenance intervals and reducing tooling costs. The secure Torx clamping ensures a stable connection between insert and holder, improving positional repeatability and maintaining cutting geometry under varying loads. Balanced cutting performance for smooth chip flow With three cutting edges and a 60 mm cutting length specified for the shank, the design provides an even load distribution and reliable chip evacuation during interrupted or continuous cuts. The cutter geometry supports a steady material removal rate and helps achieve a uniform surface texture. For production managers, this means fewer adjustments during machining and a predictable finishing step downstream. Practical documentation and traceability for workshop use The article is listed as SKU S662TM, with technical files available (see the product documentation identifiers). Compatibility with Taegutec inserts is indicated, simplifying procurement and inventory management when standardising insert types across machines. Technical advisers are available to discuss successful integration of this tool into existing toolposts and to recommend insert grades based on the specific machining strategy. For purchase or technical consultation related to Teknik Makina tools, contact Metav Werkzeuge for reliable supply and application support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S662TM Manufacturer: Teknik Makina Product type: Shaft milling cutter Compatible inserts: APKT 1705 indexable inserts Compatible insert manufacturer: Taegutec Documentation IDs: 62de7ee633927e49dbf32790, 62de7e5233927e49dbf3274b Core data Shank diameter: 32 mm Cutting length (shank): 60 mm Diameter: 32 mm Number of cutting edges: 3 Overall length: 150 mm Weight: 0.85 kg Design / Special features Torx screw: M4x10 Torx key: T15 Indexable insert system: APKT 1705 Suitable for use with Taegutec APKT 1705 inserts FAQ Which insert type is required for this cutter? The Shaft Milling Cutter S662TM is designed for APKT 1705 indexable inserts and is specified to work with inserts from Taegutec. Are the clamping screw and key supplied with the tool? Product data for S662TM lists an M4x10 Torx screw and a T15 Torx key; these items are documented as part of the tool specification. What are the main dimensions to consider when planning tool setup? Important dimensions for the S662TM are a 32 mm shank diameter, 150 mm overall length and a 60 mm cutting length, as listed in the technical data. How many cutting edges does the cutter have and what is the benefit? The S662TM uses three cutting edges, which provides balanced cutting forces and improved chip flow for smoother operation and consistent surface finish. What is the catalogue reference for ordering or stock checks? Refer to SKU S662TM when enquiring or ordering this shaft milling cutter from Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter Head For LNMX 1510 Indexable Inserts 2 Flutes, 90° Cutting Angle - Teknik Makina
Take advantage of a compact tool that combines a Ø32 mm shank and 50 mm cutting length for efficient, deeper milling passes; its compatibility with LNMX 1510 indexable inserts and Korloy plates ensures rapid tool changes and consistent results — order directly via Metav Werkzeuge or consult the Metav team for application advice S362TM Shank Cutter — indexable insert cutter, Ø32 mm, 2 cutting edges — Teknik Makina A Shank cutter S362TM designed for use with LNMX 1510 indexable inserts, offering a robust solution for precision milling and fast insert replacement in production and repair environments Diameter 32 mm shank Two cutting edges for efficient cutting 50 mm cutting length for deeper passes Compatible with LNMX 1510 Korloy inserts High material removal rate with controlled tool behaviour The S362TM is engineered to deliver a stable cutting process thanks to its two cutting edges and a balanced geometry that reduces vibration during operation. With a Ø32 mm shank and a 50 mm cutting length, the tool enables deeper passes while maintaining surface quality; the 90° cutting angle gives predictable engagement, which supports consistent cycle times and measurable productivity gains on batch work. These attributes translate into fewer tool changes and a reliable machining rhythm on the shop floor. Fast insert changes and straightforward assembly Assembly and maintenance follow a rational approach: the cutter is secured with a Torx M4x12.5 screw and requires a T15 key, ensuring quick, repeatable clamping of LNMX 1510 indexable inserts. Compatibility with Korloy inserts simplifies stocking and procurement, because one insert family covers multiple cutters. The result is reduced setup time and improved line uptime — a practical advantage for production environments that value tool-change speed and inventory consistency. Designed for everyday workshop robustness With a total length of 150 mm and a mass of 0.885 kg, the cutter combines manoeuvrability with stability, making it suitable for both bench-top milling machines and more rigid CNC centres. The shank design supports secure clamping while the insert system allows partial regrinding strategies and simple plate replacement to extend usable tool life. Supplied as a complete shank cutter ready for LNMX 1510 plates, the tool supports efficient workflows and predictable maintenance intervals, which contributes to overall process reliability and cost control. For tailored machining recommendations, availability and delivery options from Metav Werkzeuge, contact our specialists at Metav Werkzeuge for professional advice and local stock information Technical Data Article number: S362TM Manufacturer: Teknik Makina Product name: Shank cutter for LNMX 1510 indexable inserts Brand: Teknik Makina Facts Diameter: 32 mm Total length: 150 mm Cutting length: 50 mm Number of cutting edges: 2 Weight: 0.885 kg Special features Compatible with LNMX 1510 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M4x12,5 Torx key size: T15 Cutting angle: 90° FAQ Which inserts fit this cutter? The cutter accepts LNMX 1510 indexable inserts; it is compatible with Korloy plates for standard insert availability. What is the shank diameter and total length? The tool has a shank diameter of 32 mm and a total length of 150 mm, designed for secure clamping and stable machining. How many cutting edges does the shank cutter have? The S362TM is fitted with two cutting edges to balance cutting efficiency and surface finish. Which screw and key are required for insert clamping? Insert clamping uses a Torx M4x12.5 screw secured with a T15 key for quick and repeatable assembly. Is the cutter suitable for deeper passes? The 50 mm cutting length supports deeper passes and reduced tool change frequency while maintaining control over chip evacuation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cutter Head For WNMX 09T3 Indexable Inserts With Internal Coolant, 32mm Shank - Teknik Makina
Take advantage of the combination of 32 mm shank stability, internal coolant, and compatibility with WNMX 09T3 Korloy inserts to maintain steady production and reduced tool-change times; order the cutter directly via Metav Werkzeuge or consult our sales engineers for application guidance. 32 mm indexable milling cutter S805-1TM for WNMX 09T3 inserts, internal coolant (Teknik Makina) A robust 32 mm milling cutter designed as an indexable insert body for WNMX 09T3 inserts, providing internal coolant delivery for reliable machining cycles in demanding workshop and production environments. 32 mm shank diameter for stable clamping Internal coolant for reliable chip evacuation Compatible with WNMX 09T3 Korloy inserts 150 mm overall length, 70 mm cutting length Drive consistent performance with secure clamping and coolant The S805-1TM is built around a 32 mm shank, giving a rigid connection to the spindle and reducing vibration during heavy cuts; this stability translates into better surface finishes and longer insert life. With a 70 mm cutting length and a compact overall length of 150 mm, the tool balances reach and stiffness, making it suitable for a wide range of milling setups. The inclusion of internal coolant delivers fluid directly to the cutting edge, improving chip evacuation and cooling the cutting zone, which helps to maintain consistent cutting conditions and reduces the risk of thermal damage to inserts. Quick insert changes and predictable maintenance cycles Designed for WNMX 09T3 indexable inserts, compatibility with Korloy grades simplifies logistics and ensures access to proven insert geometries. The clamping system uses a M3x7 Torx screw with Torx T8 key interface for secure fixing and swift replacement, so maintenance is straightforward and repeatable. With 3 cutting edges, the cutter offers an efficient balance between material removal rate and indexable insert economy; fewer interruptions for tool changes mean higher net uptime and lower unit production costs. Integration with shop workflows and dependable handling At just 0.841 kg, the cutter body is convenient to handle while robust enough for industrial use. The design suits both batch and continuous production, allowing straightforward changeover on milling centres that accept 32 mm shanks. Its straightforward geometry and proven clamping concept minimise setup time and help maintain process reliability. For purchasers seeking supply-chain confidence, the tooling is available through established distribution channels that prioritise availability and consistent quality, supporting predictable production planning and stock management. For reliable internal coolant performance and Korloy compatibility, contact Metav Werkzeuge to discuss the Teknik Makina S805-1TM milling cutter and confirm the optimal insert grades and machine setup for your application. Technical data Article number: S805-1TM Manufacturer: Teknik Makina Product type: Milling cutter (shank cutter) Label: 32mm Schaftfräser WNMX 09T3 L150mm mit Innenkühlung Facts Shank diameter: 32 mm Overall length: 150 mm Cutting length (shank/insert zone): 70 mm Weight: 0.841 kg Cutting edges: 3 ECLASS: 21180806 Special features Internal coolant: yes Compatible inserts: WNMX 09T3 (Korloy) Torx screw: M3x7 Torx key: T8 SKU: S805-1TM UID: S805-1TM Category path: Zerspanen › Schaftfräser FAQ Which insert type fits this cutter body? The cutter body accepts WNMX 09T3 indexable inserts; Korloy inserts in this geometry are compatible and commonly used with the S805-1TM. Is internal coolant supported and how does it help? Yes — the tool features internal coolant, which directs coolant to the cutting edge to enhance chip evacuation and thermal control, improving insert life and process stability. What are the shank and overall dimensions? Shank diameter is 32 mm, the overall length is 150 mm and the cutting length is 70 mm, offering a balance between reach and rigidity. How are the inserts secured and which key is required? Inserts are fastened with an M3x7 Torx screw; a Torx T8 key is used for secure and repeatable clamping. Can this cutter be used across different machine platforms? The 32 mm shank and standard clamping concept make the cutter suitable for milling centres and machining centres that accept this shank size; machine-specific adapters or holders may be required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm End Mill 90° For SECO LOEX 0804 Indexable Inserts, 3 Flutes, 20mm Shank - Teknik Makina
Benefit from the combination of a 90° cutting angle and a 20 mm shank for stable shoulder milling and reliable indexable-insert performance; the cutter is tailored for LOEX 0804 inserts and provides precise seat and repeatability. Order this milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft milling cutter S295TM — 90° indexable-insert body for LOEX 0804 (Teknik Cutting Tools) The Shaft milling cutter S295TM is a 90° shank milling body engineered for shoulder milling with LOEX 0804 indexable inserts, suitable for CNC and workshop operations where repeatable insert seating and quick index changes are required. 90° cutting angle for shoulder milling 20 mm shank diameter for stable clamping Compatible with LOEX 0804 indexable inserts Torx screw M2.5x7, T8 key required Precise shoulder milling with proven insert compatibility The body provides a true 90° cutting angle, designed to locate and support LOEX 0804 indexable inserts for accurate shoulder and face milling. This geometry ensures a consistent cutting plane and reduces the need for secondary finishing, so process times are shortened. The compatibility with SECO-type inserts permits flexible tooling strategies while keeping setups repeatable and predictable. Stable clamping and runout control for improved surface finish A 20 mm shank offers a robust interface with collets or holders, improving rigidity and reducing deflection under cutting forces. The increased stiffness contributes to better surface finish and extended insert life by limiting vibration and chatter. Where machines and holders are already set up for metric shank tooling, the cutter integrates without additional adapters, simplifying the tool changeover workflow. Fast index changes and straightforward maintenance Equipped for secure insert retention, the body uses a M2.5x7 Torx screw and requires a T8 key for tightening and removal, enabling quick insert replacement and minimal downtime. The design accommodates 3 cutting edges, which balances productivity and serviceability: inserts can be indexed or changed rapidly, reducing total tool change time and making preventative maintenance predictable. Ready for workshop integration and reliable supply With an overall length of 150 mm and a compact mass of 0.384 kg, the cutter is sized for standard tool magazines and automatic tool changers while remaining manageable for manual setups. Metav's supply network provides consistent availability from Emmerich, backed by technical advice and a broad range of complementary tooling, helping to reduce supplier complexity and secure timely replenishment for production environments. For expert advice on integrating the Teknik Cutting Tools shaft milling cutter into current toolsets and fast delivery from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised recommendations and availability. Technical data Article number: S295TM Manufacturer: Teknik Makina For inserts: LOEX 0804 Compatible with inserts by: SECO Torx screw: M2.5x7 Torx key size: T8 Core specifications Shank diameter: 20 mm Cutting length: 40 mm Overall length: 150 mm Diameter: 20 mm Cutting edges: 3 Weight: 0.384 kg Cutting angle: 90° Special features For LOEX 0804 indexable inserts Compatible with SECO LOEX insert series 90° shoulder milling geometry Torx screw M2.5x7 for insert clamping FAQ Which inserts fit this milling cutter? The cutter accepts LOEX 0804 indexable inserts; compatibility with SECO LOEX inserts is specified for the S295TM milling body. What shank diameter is required for clamping? Clamping requires a 20 mm shank holder or collet to ensure the recommended rigidity for the S295TM tool body. How many cutting edges are supported? The cutter is specified for 3 cutting edges, enabling efficient machining cycles and predictable indexing. Which screw and tool are needed for insert changes? Insert retention uses an M2.5x7 Torx screw and is tightened/removed using a T8 Torx key. What are the main dimensions to set up in the machine? Key dimensions are a 20 mm shank diameter, 40 mm cutting length and 150 mm overall length for fixture and magazine planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm End Mill For BDMT 1704 Indexable Inserts, 2 Flutes, 90° Cutting Angle, 25mm Shank - Teknik Makina
Take advantage of a robust combination of stable clamping and straightforward insert replacement to keep production reliable and predictable; benefit from fast maintenance thanks to the Torx M4x7 clamping system and the broad availability of BDMT 1704 inserts via Kyocera or compatible suppliers — order directly through Metav Werkzeuge or request specialist advice. Shaft milling cutter S579TM — 25 mm shaft, for BDMT 1704 indexable inserts (Teknik Makina) The Shaft milling cutter S579TM is a precision cutter body designed for use with BDMT 1704 indexable inserts, intended for process-stable milling in production and workshop environments 25 mm shaft diameter for stable clamping Accepts BDMT 1704 indexable inserts (Kyocera) 50 mm effective cutting length Torx M4x7 clamping screw, T15 key required Consistent productivity through stable tool geometry The combination of a 25 mm shaft and a 150 mm overall length provides a predictable tool setup that reduces vibration and runout during milling. The 50 mm cutting length ensures a useful engagement zone for many through‑pass and pocketing operations, while the two cutting edges and 90° cutting angle give a straightforward cutting kinematic that is easy to match with available BDMT insert geometries. For production planning, this means fewer interruptions for tool change and a reproducible surface finish when paired with the correct insert grade. The body’s mass of 0.548 kg contributes to momentum damping without adding excessive tool‑holder load. Fast replacement and secure clamping for minimal downtime Maintenance and insert changes are simplified by the Torx M4x7 clamping screw and the requirement for a T15 key. This common Torx size is widely available across workshops, enabling rapid insert indexing or replacement. The cutter accepts BDMT 1704 style inserts — a format supplied by Kyocera and other manufacturers — allowing procurement flexibility and rapid stock replacement. The secure screw clamp design reduces the risk of insert movement under load, supporting stable cutting conditions and consistent geometry over longer production runs. Integration and typical use cases in workshop and serial production The S579TM is conceived as a modular element in indexable insert tooling systems where changeover speed and toolbody rigidity are priorities. Its compatibility with BDMT 1704 inserts makes it suitable for workflows that demand frequent insert indexing for tool life management. The simple geometry and robust clamping help integrators and shopfloor planners implement predictable cycle times and reduce scrap risk. Where tool inventories are centralised, the cutter body’s reliance on a common insert type and Torx fastening supports streamlined logistics and lower spare‑part complexity. For a reliable supply and tailored advice on integrating the S579TM into existing tool fleets, contact Metav Werkzeuge GmbH — info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s team in Emmerich will support specification and delivery. Technical data Article number: S579TM Manufacturer: Teknik Makina Shaft diameter: 25 mm Effective cutting length: 50 mm Overall length: 150 mm Weight: 0.548 kg Number of cutting edges: 2 Cutting angle: 90° Diameter: 25 mm Clamping screw: M4x7 Torx key size: T15 Special features For BDMT 1704 indexable inserts Compatible with Kyocera BDMT 1704 inserts Torx M4x7 clamping screw SKU: S579TM FAQ What insert type does this cutter accept? The cutter accepts BDMT 1704 indexable inserts; the body is designed around that insert form and index. Is the clamping screw a standard size? Yes, the clamping screw is M4x7 and the required Torx key size is T15, both commonly available. What shaft diameter is required in the toolholder? The toolbody has a 25 mm shaft diameter, so a matching 25 mm holder or collet interface is required for correct clamping. How many cutting edges does the toolbody provide? The cutter body is configured for two cutting edges, providing a balance between material removal and insert indexing. Can Kyocera inserts be used directly? Kyocera BDMT 1704 inserts are listed as compatible, enabling direct replacement with those inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm End Mill For BLMP 0603 Indexable Inserts With Internal Coolant, 16mm Shank - Teknik Makina
Take advantage of a compact, high-rigidity cutter that combines a 16 mm shank with internal coolant for improved cycle stability and tool life; order the end mill directly via Metav Werkzeuge or ask our consultants if needed. 16 mm End Mill for BLMP 0603 Indexable Inserts – 150 mm Overall Length by Teknik Makina The 16 mm end mill for BLMP 0603 Indexable Inserts is a shank-mounted milling cutter with internal coolant designed for precision indexable-insert milling in CNC operations 16 mm shank diameter for compact toolholders Internal coolant for improved chip evacuation Compatible with Taegutec BLMP 0603 inserts Precision and rigidity for repeatable milling results The cutter is built around a 16 mm shank and a 150 mm overall length, offering a compact footprint with high torsional stiffness. That combination reduces chatter and increases positional repeatability on medium-duty milling tasks. For production environments where consistent part geometry matters, this configuration supports stable depth-of-cut and surface finish. The use of indexable inserts minimises downtime for edge changes and keeps process interruptions predictable. Improved coolant delivery and chip control for longer tool life Integrated internal coolant channels direct cutting fluid straight to the cutting zone, supporting efficient chip evacuation and reduced heat build-up at the cutting edge. A 40 mm cutting length provides an extended engagement zone while keeping the tool body compact, which helps maintain rigidity during extended passes. Effective coolant flow reduces thermal wear on inserts and contributes to consistent cutting forces, extending insert life and lowering overall tooling cost per component. Fast, secure insert clamping and straightforward maintenance Insert retention uses a Torx screw system to ensure stable clamping and repeatable seating. The cutter is designed for quick insert changes with a T8 Torx key and M3x6.2 fixing screws, allowing maintenance to be completed with standard workshop tools. The tool carries two cutting edges, enabling balanced cutting action and even wear distribution; this simplifies inventory management compared with multi-edge systems and keeps changeover times low. Production-oriented design for CNC shops and jobbers Weighing approximately 0.235 kg and identified as S479-1TM, the tool is optimised for automated tool changes and high-utilisation shop floors. Compatibility with Taegutec BLMP 0603 indexable inserts provides access to a broad range of grades and geometries, letting users match insert chemistry to the workpiece and cutting strategy. The compact design reduces spindle load and supports faster acceleration and positioning, helping to improve cycle times across diverse milling operations. Contact Metav Werkzeuge to discuss Teknik Makina's 16 mm end mill with internal coolant and ensure the correct insert grade and spindle setup for the intended application, or request stock and technical guidance from our Emmerich specialists Technical data Article number: S479-1TM Manufacturer: Teknik Makina Product type: End mill for indexable inserts Facts Diameter: 16 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.235 kg Special features Internal coolant Compatible with BLMP 0603 indexable inserts Matching insert manufacturer: Taegutec Torx key: T8 Fixing screw: M3x6.2 FAQ What inserts fit this tool? This end mill accepts BLMP 0603 indexable inserts; the cutter is specified for use with Taegutec BLMP 0603 inserts for predictable seating and performance. How is coolant supplied to the cutting edge? Internal coolant is routed through the tool body to the cutting zone, improving chip evacuation and reducing thermal stress at the insert edge. What tools are required for insert changes? Insert changes use a Torx T8 key with M3x6.2 fixing screws; the design supports quick and secure clamping for repeatable seating. How many cutting edges does the tool have? The cutter is configured with two cutting edges, providing balanced cutting forces and simplified inventory management. Which SKU identifies this item for ordering? Order reference is S479-1TM, which denotes the 16 mm shank end mill configured for BLMP 0603 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm End Mill for LOGU 0303 Indexable Inserts 17mm Diameter, 2 Flutes T8 Torx Screwdriver - Teknik Makina
Take advantage of a compact, precision-engineered shank milling cutter that combines compatibility with LOGU 0303 indexable inserts and a robust 17 mm cutter diameter for consistent material removal; order directly via Metav Werkzeuge or ask the consultants for application advice. Shank milling cutter S676TM — for LOGU 0303 indexable inserts, 150 mm overall length (Teknik Makina) Shank milling cutter for industrial milling with indexable inserts, designed for secure clamping and efficient chip removal in workshop and production environments 17 mm shank diameter for secure clamping Compatible with LOGU 0303 indexable inserts 150 mm overall length for deeper reach Two cutting edges for efficient material removal Reliable cutting with standardised, replaceable inserts The S676TM is designed around the LOGU 0303 system of indexable inserts, providing predictable cutting behaviour and straightforward maintenance. By using standard inserts, tool life is largely determined by the replaceable cutting tips rather than the tool body, which reduces long-term tooling costs and simplifies inventory management. The combination of a 17 mm cutter diameter and a proven insert geometry delivers repeatable results across batch and single-piece production, making the tool suitable for tasks where consistent dimensional control is required. Secure clamping and reduced setup time for continuous production A focus on fast, reliable fastening reduces machine downtime: the tool features a 16 mm shaft diameter for stable clamping in standard holders and a cutting length of 50 mm to reach into deeper profiles. Inserts are secured using the M3x7 screw, tightened with a Torx T8 key, enabling repeatable torque and minimising the risk of insert movement during high-speed milling. These design elements translate directly into operational benefits — fewer interruptions for adjustment, lower risk of damaged inserts, and a steadier machining process overall. Compact, lightweight design suited to workshop and production use Weighing just 0.219 kg and offering two cutting edges, this cutter is easy to handle during setup and well balanced in the spindle for stable operation. Compatibility with Kyocera-branded insert systems widens the choice of cutting grades and geometries, allowing adaptation to different workpiece materials and finishes. The S676TM is therefore a practical option where a compact, indexable solution is required for repetitive milling, near-net shaping or slotting operations in a variety of metalworking contexts. For detailed application guidance on Teknik Cutting Tools' S676TM shank milling cutter and to confirm stock at Metav Werkzeuge, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S676TM Product type: Shank milling cutter Compatible inserts: LOGU 0303 (Kyocera) Manufacturer: Teknik Cutting Tools / Teknik Makina Dimensions & weight Cutter diameter: 17 mm Shaft diameter: 16 mm Overall length: 150 mm Cutting length (shank): 50 mm Cutting edges: 2 Weight: 0.219 kg eCl@ss: 21180806 Fastening & accessories Torx key: T8 Screw: M3x7 FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; this compatibility is specified for insert systems supplied by Kyocera and similar suppliers. Is the shank suitable for standard tool holders? Yes, the 16 mm shaft is compatible with common collet and chuck holders used in milling centres and machining centres. What is the reachable cutting length? The tool provides a 50 mm cutting length on the shank, with a total overall length of 150 mm, suitable for recessed or deeper cuts. How are the inserts secured? Inserts are fastened with an M3x7 screw using a Torx T8 key to ensure repeatable and secure clamping. For which applications is this cutter intended? Designed for industrial and workshop milling operations where an indexable solution is preferred for economical tip changes, the cutter suits profiling, slotting and general material removal tasks. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm End Mill for LOGU 0303 Indexable Inserts With Internal Coolant, 21mm - Teknik Makina
Take advantage of a compact combination of 21 mm cutting diameter, internal coolant and a 20 mm shank for steady chip control and longer insert life; order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Shank milling cutter for LOGU 0303 indexable inserts — 21 mm, internal coolant (Teknik Makina) Shank milling cutter engineered for insertable milling with LOGU 0303 knives, suited to production and job-shop machining where reliable coolant delivery and simple insert handling matter 21 mm cutting diameter Internal coolant for improved tool life Compatible with LOGU 0303 indexable inserts 20 mm shank and 60 mm cutting length Consistent chip control for higher productivity The tool’s integrated internal coolant channel directs cutting fluid precisely to the cutting zone, reducing heat and promoting stable cutting conditions. With a 21 mm diameter and three cutting edges, the design supports balanced material removal and predictable cycle times. For shops aiming to increase throughput without sacrificing surface quality, the guided coolant flow lowers tool wear and helps maintain consistent tolerances across series production. Simple insert compatibility and maintenance reduces downtime Designed for LOGU 0303 indexable inserts and compatible with Kyocera replacement inserts, the cutter simplifies inventory and changeovers. The three-edge configuration provides a good compromise between cutting performance and economical insert consumption. Fast replacement is supported by an M3x7 Torx screw driven with a T8 key, while the standardised shank allows secure clamping in conventional holders — practical features that shorten maintenance intervals and keep machines cutting. Sturdy shank and defined engagement for reliable milling A 20 mm shank and an overall length of 150 mm offer rigid tool engagement and access to deeper features without undue deflection. The 60 mm cutting length is optimised for face and shoulder milling operations where extended reach is required. Combined with a tool mass of 0.365 kg, the cutter balances inertial stability with manageable handling. These mechanical properties deliver reproducible performance in small to medium batch production, supporting quality-focused workflows. For application advice or to secure Teknik Cutting Tools’ shank milling cutter via Metav Werkzeuge, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specification matching and delivery options. Technical data Article number: S679-1TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Facts Cutting diameter: 21 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 60 mm Number of cutting edges: 3 Weight: 0.365 kg Special features Internal coolant For LOGU 0303 indexable inserts Compatible insert manufacturer: Kyocera Torx screw: M3x7 Torx key: T8 Product type: shank milling cutter FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; Kyocera-compatible grades are specified for the best fit and performance. Is internal coolant available through the tool? Yes, the shank milling cutter features internal coolant delivery to the cutting zone for improved tool life and process stability. What are the key dimensions to check for holder compatibility? Check the 20 mm shank diameter and the overall length of 150 mm; the 60 mm cutting length is also relevant for reach and engagement planning. How are inserts secured on this tool? Inserts are fastened with an M3x7 Torx screw, tightened with a T8 key for reliable clamping and quick replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm End Mill For RDMT 12T3 Indexable Inserts, 3 Flutes, 32mm Shank - Teknik Makina
Benefit from a robust combination of modular indexable design, a 32 mm shank for stable clamping and three cutting edges for consistent material removal; order the shaft milling cutter R238TM directly via Metav Werkzeuge or consult our specialists for tailored advice. Shaft milling cutter R238TM — 32 mm shank, for RDMT 12T3 indexable inserts (Teknik Makina) The Shaft milling cutter R238TM is designed for secure indexable-insert milling, offering a compact solution for peripheral and face milling tasks in CNC environments Solid 32 mm shank for high rigidity Accepts RDMT 12T3 indexable inserts Three cutting edges for smooth material removal T15 Torx clamping for secure insert fixation Stable clamping for precise material removal The tool is built around a 32 mm shank that increases stiffness at the tool holder interface, which in turn improves cutting stability and reduces chatter. With three cutting edges the design balances cutting load and vibration, enabling more consistent chip formation and surface finish. The reduced deflection contributes to dependable repeatability on serial runs while keeping setup times predictable. Fast insert changes and reliable clamping The modular insert system accepts RDMT 12T3 indexable inserts, enabling rapid replacement without regrinding. Fixing uses a M3.5 locking screw together with a M3.5x8.5 Torx screw, tightened with a T15 Torx key, which simplifies maintenance and lowers downtime. This clear mechanical interface translates into predictable service intervals and easier stock management for production planners. Compact geometry for versatile machining With a 45 mm cutting length and a 150 mm overall length, the tool provides a practical balance between reach and rigidity for many workshop and CNC applications. At 0.876 kg, the cutter is light enough for stable high-speed rotation yet substantial enough to signal a robust construction. The combination of dimensions and indexable technology reduces tooling cost per part through reuse of inserts while preserving process stability. For secure machining with the sturdy 32 mm shank and RDMT 12T3 compatibility, contact Metav Werkzeuge for order handling and technical consultation — email info@metav-werkzeuge.com or call +49 2822 7131930 for delivery from Emmerich. Technical data Article number: R238TM Manufacturer: Teknik Makina Product name: Shaft milling cutter for RDMT 12T3 indexable inserts Facts Diameter: 32 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.876 kg ECLASS: 21180806 ETIM: EC011860 Special features For RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 SKU: R238TM FAQ Which indexable inserts fit this cutter? The cutter accepts RDMT 12T3 indexable inserts designed for the tool's pocket geometry and clamping system. What is the shank diameter and how does it affect stability? The 32 mm shank increases stiffness at the tool holder and improves resistance to deflection during milling operations. How many cutting edges does the cutter have? The tool is configured with three cutting edges, optimised to balance material removal rate and surface quality. Which screws and key are required for insert clamping? Insert clamping uses a M3.5 locking screw, a M3.5x8.5 Torx screw and a T15 Torx key for secure fixation. What are the overall and cutting lengths? Overall length is 150 mm and the cutting length is 45 mm, providing a practical compromise between reach and rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak No:9, Selcuklu/Konya, Turkey / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm End Mill For SDMT 09T3 Indexable Inserts, 2 Cutting Edges, 25mm Shank - Teknik Makina
Benefit from a combination of rigid 25 mm shank support, compatibility with SDMT 09T3 indexable inserts and secure Torx clamping for stable, repeatable milling results; order directly via Metav Werkzeuge or consult the sales team for application advice. Shank milling cutter S395TM — 25 mm shank, for SDMT 09T3 indexable inserts (Teknik Makina) Shank milling cutter S395TM is a shank-mounted indexable insert milling body designed for efficient face and slot milling with SDMT 09T3 inserts, delivering stable cutting performance in general machining applications. 25 mm shank diameter for rigid clamping Compatible with SDMT 09T3 indexable inserts Torx M3.5×8.5 clamping with T15 key 60 mm effective cutting length, two cutting edges Engineered rigidity for consistent material removal The S395TM is built around a 25 mm shank, which provides a high degree of axial and radial stiffness for demanding milling tasks. This rigidity reduces chatter and vibration, resulting in improved surface finish and longer insert life. By combining a robust shank with a 150 mm overall length, the tool body balances reach and stability, making it suitable for both through-pass and semi-deep cuts. The result is a reliable cutting solution that supports higher metal removal rates while maintaining dimensional consistency. Secure clamping for repeatable setups and safety Clamping reliability is ensured by the Torx M3.5×8.5 screw system tightened with a T15 key, creating a repeatable and secure seat for the SDMT 09T3 inserts. A stable clamping mechanism minimises indexable insert movement under load, which improves cutting predictability and reduces the risk of insert damage. The cutter features two cutting edges, allowing balanced engagement and even wear distribution; this extends service intervals and simplifies maintenance routines in production environments. Insert compatibility that streamlines tooling management Compatibility with SDMT 09T3 indexable inserts (manufacturer: ZCC) makes this milling body a practical choice for workshops that prioritise inventory efficiency. Using a standard insert format enables fast replacements and interchangeability across different tool bodies, reducing setup times and stock variety. The 60 mm effective cutting length provides the working depth needed for many peripheral and face milling operations, while the relatively light mass of 0.573 kg keeps handling easy during tool changes and minimises spindle load increases during acceleration. For procurement of Teknik Cutting Tools components such as the S395TM shank milling cutter, contact Metav Werkzeuge for tailored technical advice and reliable delivery from Emmerich. Technical data Article number: S395TM Manufacturer: Teknik Makina Product: Shank-mounted indexable milling cutter Application: for SDMT 09T3 indexable inserts (for SDMT 09T3 Indexable Inserts) Compatible insert producer: ZCC Numbers / Core technical data Shank diameter: 25 mm Effective cutting length: 60 mm Overall length: 150 mm Tool diameter: 25 mm Cutting edges: 2 Weight: 0.573 kg ECLASS: 21180806 ETIM: EC011860 Designs / Special features Torx screw: M3.5×8.5 Torx key size: T15 Insert type: SDMT 09T3 Files: migration IDs included Suitable for face and slot milling FAQ What insert type is required for this milling cutter? The milling body is designed for SDMT 09T3 indexable inserts; these are referenced in the product data and are compatible with the cutter geometry. Which clamping screw and key are used to secure inserts? Clamping is effected with a Torx M3.5×8.5 screw, tightened using a T15 Torx key for secure and repeatable insert fastening. What is the shank diameter and overall length of the tool? The tool features a 25 mm shank diameter and an overall length of 150 mm, with an effective cutting length of 60 mm. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com