Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
35mm Chamfer Cutter APKT1604 Inserts 6 Cutting Edges, 15° Angle, 45mm Shank - Teknik Makina
Take advantage of a compact chamfering solution that combines high edge quality with quick insert changes — the tool’s Ø35 mm body and 45 mm shank deliver stable clamping and reliable results in series production; order the tool directly via Metav Werkzeuge or ask our consultants for application support. Chamfer mill T457TM by Teknik Makina — 15° cutting angle, compatible with APKT 1604 The Chamfer mill is a solid chamfering cutter designed for indexable inserts and precise edge finishing in metalworking applications. Ø35 mm body diameter Compatible with APKT 1604 inserts 45 mm shank for stable clamping Six cutting edges for smooth chamfers Consistent chamfers for repeatable component quality The T457TM delivers precision chamfering through a compact geometry and carefully defined cutting angle. With a 50.5 mm cutting diameter at maximum and a nominal Ø35 mm body, the cutter is configured to produce uniform chamfers across batches, reducing rework and inspection time. The tool’s 6 cutting edges distribute cutting forces evenly, which helps to maintain a steady surface finish and extend insert life. This design suits metalworking environments where reproducibility and tight edge tolerances matter. Quick set-up and dependable toolholding for efficient cycles A short overall length of 60 mm and a robust 45 mm shank support stable clamping in standard toolholders, lowering vibration and improving surface integrity. Insert fixation uses an M4x10 Torx screw and a T15 key, enabling secure, fast replacements without specialised fixtures. The compatibility with APKT 1604 indexable inserts from major manufacturers gives flexibility when selecting grades for different materials, while the compact mass (0.415 kg) simplifies handling during tool changes and reduces spindle load during operation. Designed for workshop reliability and simple maintenance The cutter is built for frequent use and straightforward upkeep: replaceable insert geometry means maintenance is limited to routine insert changes rather than full-tool replacement. Compatibility with inserts from Korloy and standard clamping hardware ensures easy sourcing of consumables. The modest tool mass and standard shank diameter also support predictable balancing and integration into existing machining setups. Documentation and parts alignment are simplified by the clear use of standardised insert types and torque requirements. Contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T457TM Article name: Fasenfräser Manufacturer: Teknik Makina Specifications Diameter (body): 35 mm Maximum cutting diameter: 50.5 mm Shank diameter: 45 mm Overall length: 60 mm Weight: 0.415 kg Cutting edges: 6 Cutting angle: 15° Torx screw: M4x10 Torx key: T15 Compatible inserts: APKT 1604 Compatibility & special features Suitable insert manufacturer: Korloy Angles available (as listed): 15°, 30°, 45°, 60°, 75° Indexable-insert design for quick replacement Compact construction for stable clamping FAQ What insert type does this chamfering cutter use? The chamfer mill T457TM is designed for APKT 1604 indexable inserts and is compatible with inserts from Korloy. What shank diameter is required for mounting? Mounting requires a toolholder that accepts a 45 mm shank, as specified for the T457TM. How many cutting edges does the cutter have and what is the benefit? The cutter has six cutting edges, which distribute cutting forces to produce smoother chamfers and extend insert life. Which cutting angles are available with this tool? The product data lists available angles of 15°, 30°, 45°, 60° and 75°, enabling a range of chamfer geometries. What size Torx screw and key are used for the inserts? Insert clamping uses an M4x10 Torx screw tightened with a T15 key, providing secure fixation for the indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Chamfer Mill 30° Cutting Angle 6 Inserts 48mm Shank - Teknik Makina
Take advantage of a compact, rigid solution that delivers repeatable bevel geometry and simple insert handling; the combination of a 48 mm shank and a 30° cutting angle ensures stable machining and consistent results. Order the tool directly via Metav Werkzeuge or consult their specialists for application-specific advice. Teknik Makina T454TM Chamfer Cutter — 35 mm, compatible with APKT 1604 The chamfer cutter by Teknik Makina is designed for precision beveling and edge preparation in milling operations, combining a compact tool body with indexable insert technology for efficient shop-floor performance 35 mm cutting diameter for precise chamfers Compatible with APKT 1604 indexable inserts 30° cutting angle for standard bevel geometry 48 mm shank for rigid toolholding Repeatable chamfers through measured geometry A controlled chamfer is achieved thanks to the tool's 35 mm diameter and 30° cutting angle, which together produce a consistent bevel across successive workpieces. The design uses indexable inserts that ensure the cutting edge can be restored quickly by rotation or replacement, so downtime is reduced and process stability is increased. For production environments where reproducibility matters, this configuration allows a predictable set-up that can be documented and repeated; the result is fewer rejects and an easier integration into existing machining cycles. Faster changeover and simplified tooling management Compatibility with APKT 1604 inserts and the common Korloy insert designation streamlines inventory: one insert type supports multiple operations. The cutter uses an M4x10 Torx screw together with a T15 key for secure seat clamping, enabling rapid insert changes with standard workshop tools. This reduction in SKU variety and the straightforward clamping concept help to shorten maintenance intervals and to lower logistical complexity, which is particularly useful for small series or mixed-production shops that value agility. Rigid shank, compact length — stability under load The tool's 48 mm shank and a 50 mm overall length create a compact, rigid assembly that resists deflection during chamfering. With six cutting edges, material removal is distributed to maintain surface quality while moderating cutting forces; the modest mass of 0.61 kg keeps spindle load predictable. Where chatter and vibration would otherwise compromise edge quality, this construction is intended to achieve a smoother finish and a more reliable cutting process, reducing rework and enhancing throughput. Speak with Metav Werkzeuge for tailored application guidance on the T454TM chamfer cutter — Metav's specialists in Emmerich can advise on insert selection, clamping procedures and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T454TM Manufacturer: Teknik Makina Designation: Chamfer cutter Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key: T15 Facts Diameter: 35 mm Max. cutting diameter: 65 mm Shank diameter: 48 mm Number of cutting edges: 6 Cutting angle: 30° Overall length: 50 mm Weight: 0.61 kg SKU: T454TM Special features For indexable inserts APKT 1604 Six cutting edges for distributed cutting load Compact design for rigid toolholding Uses Torx M4x10 clamping screw, T15 key required FAQ How many cutting edges does the T454TM have? The T454TM is supplied with six cutting edges, which helps to distribute cutting forces and maintain surface quality during chamfering. Which insert type fits this chamfer cutter? This chamfer cutter accepts APKT 1604 indexable inserts; the designation matches widely used Korloy inserts for easy procurement. What clamping hardware is specified for insert fastening? Insert clamping is achieved with an M4x10 Torx screw; a T15 key is used to tighten and release the insert seat. What shank and length dimensions should be considered for setup? The tool features a 48 mm shank and a 50 mm overall length, which supports rigid mounting and reduced overhang in most milling setups. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Chamfer Mill APKT 1604 Compatible, 60° Cutting Angle, 6 Flutes, 60mm Shank - Teknik Makina
Benefit from precise chamfering with a robust 60 mm shank and a wide 86 mm cutting diameter; the cutter’s 60° geometry and six cutting edges combine stability and efficient material removal. Purchase or request expert advice via Metav Werkzeuge for tailored application support. Chamfer mill T455TM — indexable chamfer cutter with 60° cutting angle (Teknik Makina) The Chamfer mill T455TM is an indexable chamfering cutter for industrial chamfer and bevel operations, compatible with APKT 1604 inserts and designed for stable mounting on a 60 mm shank. 60° cutting angle for accurate chamfers Compatible with APKT 1604 indexable inserts 86 mm maximum cutting diameter 6 cutting edges for smooth material removal Faster, more consistent chamfering through engineered geometry The milling head’s 60° cutting angle is engineered to produce uniform chamfers with predictable material removal rates. By combining a large effective diameter (86 mm) with a stable 60 mm shank, the tool reduces vibrations and improves surface quality during high-volume runs. This geometry allows the cutter to maintain cutting engagement and distribute load across multiple cutting edges, resulting in a repeatable finish and fewer rework cycles for production parts. Cost-efficient insert system and straightforward maintenance Equipped for APKT 1604 inserts and compatible with Korloy insert grades, the cutter supports rapid index changes and simple inventory management. The tool is secured with M4x10 Torx screws and associated T15 key, enabling quick, toolroom-friendly insert replacement. For workshops seeking uptime, the indexable system reduces tooling costs per component and shortens maintenance intervals without specialised fixtures. Robust build for industrial duty and reliable handling With six cutting edges and a mass of 0.892 kg, this cutter balances rigidity with handling convenience. The combination of multiple edges and stable attachment minimises chattering and extends insert life by sharing wear. The tool’s overall length of 50 mm contributes to a compact setup, lowering cantilever forces on the spindle and promoting safer, higher-precision machining in repetitive chamfering tasks. Suitable for workshop and light production environments Designed for consistent chamfer production, the cutter is a pragmatic choice for CNC and milling centres that require dependable indexable tooling. Backed by Teknik Makina engineering and available through Metav Werkzeuge, the cutter benefits from broad aftermarket support and compatible insert availability. Metav’s distribution model focuses on dependable supply and industry-grade quality control, supporting efficient procurement and steady workshop operation. Contact Metav Werkzeuge for application-specific recommendations on Teknik Makina chamfering cutters and to arrange prompt delivery from Emmerich. Technical data Article number: T455TM Core specifications Maximum cutting diameter: 86 mm Shank diameter: 60 mm Overall length: 50 mm Number of cutting edges: 6 Weight: 0.892 kg Cutting angle: 60° Features and compatibility Insert type: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key: T15 FAQ Which insert type does the cutter accept? The cutter accepts APKT 1604 indexable inserts; compatible grades from Korloy are suitable for typical chamfering applications. What is the maximum cutting diameter of the tool? The maximum cutting diameter is 86 mm, allowing broad chamfer widths while retaining stability via the 60 mm shank. What shank size is required for mounting? A 60 mm shank diameter is specified for secure mounting and reduced vibration during operation. Are fastening screws and the key included? The tool is specified with M4x10 Torx screws and a T15 key for insert fixing and replacement. Is the cutter suitable for high-volume production? The cutter’s indexable design and 6 cutting edges make it appropriate for repetitive chamfering tasks in workshop and light production settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Chamfer Mill APKT 1604 Compatible, 75° Cutting Angle, 6 Flutes, 60mm Shank - Teknik Makina
Take advantage of the combination of robust toolholding, a defined 75° chamfer geometry and easy insert replacement for consistent edge finishes and reduced setup time; order the component via Metav Werkzeuge or contact the consultants for tailored advice. Chamfer mill T458TM — 75° cutting angle, 60 mm shank (Teknik Makina) A chamfer mill T458TM designed for precision edge chamfering in industrial machining, compatible with APKT 1604 indexable inserts 75° cutting angle for precise chamfers Compatible with APKT 1604 indexable inserts 60 mm shank for stable toolholding Six cutting edges for efficient material removal Consistent chamfer geometry for reliable production The T458TM delivers a defined 75° cutting angle, engineered to produce repeatable chamfers with minimal setup variance. The combination of a rigid 60 mm shank and a compact overall length of 50 mm stabilises the tool in the holder, reducing vibration and improving surface finish. With six cutting edges arranged to share the load, wear is distributed evenly, which extends insert life and sustains process reliability. This configuration supports lean production by lowering the frequency of rework and by helping to maintain tolerances across batch runs. Efficient indexable system that speeds up changeover Designed around indexable inserts APKT 1604 (compatible with Korloy), the cutter reduces downtime through quick insert indexing and replacement. The indexable system permits consistent edge geometry without complex regrinding, which simplifies tool management in busy workshops and small production lines alike. The combination of multiple cutting edges and replaceable inserts enhances throughput and provides a predictable cost-per-edge metric for job costing and process planning. Serviceable design with clear maintenance steps Insert retention uses a Torx screw specification M4x10 and the required key size is T15, enabling straightforward replacement and secure clamping. The tool's balanced mass (approx. 1.256 kg) and robust construction aid in stable cutting performance, while the compatibility with Korloy inserts broadens sourcing options for spares. For traceability and ordering, reference T458TM and Teknik Makina when selecting holders or replacement parts; the model’s design supports routine maintenance without specialised fixtures. For tailored technical advice on integrating the Teknik Makina chamfer mill into existing tool setups or to confirm suitability for a specific application, contact Metav Werkzeuge in Emmerich for expert guidance and stock information Technical data Article number: T458TM Manufacturer: Teknik Makina Insert type: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key: T15 Core specifications Cutting angle: 75° Shank diameter: 60 mm Overall length: 50 mm Cutting edges: 6 Weight: 1.256 kg Max. cutting diameter: 94 mm Nominal diameter: 35 mm Features & versions Compatible with indexable inserts APKT 1604 Insert supplier compatibility: Korloy Secure clamping via M4x10 Torx screw Balanced design for reduced vibration FAQ What insert type is required for this chamfer cutter? The cutter is specified for APKT 1604 indexable inserts; compatibility with Korloy inserts is indicated and recommended for optimal fit and performance. Which toolholder diameter does the cutter require? This tool uses a 60 mm shank for rigid mounting and stable toolholding during chamfering operations. How many cutting edges are provided and what is the benefit? The tool features six cutting edges, which distribute wear across multiple cutting faces and increase effective machining time between indexings. What is the specified cutting angle and what does it mean for applications? A 75° cutting angle provides a defined chamfer geometry suitable for standard edge preparation tasks, delivering consistent results for assemblies requiring controlled edge breaks. Which fastener and key are needed for insert changes? Insert retention uses an M4x10 Torx screw and requires a T15 Torx key for secure and repeatable replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Corner Turning Head for BOMT 1304 Indexable Inserts Internal Coolant, 90° - Teknik Makina
Take advantage of a compact, performance-focused tool head that combines precise geometry and internal coolant for cleaner cuts and longer insert life; order directly via Metav Werkzeuge or request tailored advice from our consultants. Corner Tool Head T964TM — 35 mm, internal coolant, for BOMT 1304 indexable inserts (Teknik Makina) The Corner Tool Head T964TM is a compact 35 mm tool head designed for precision indexable-insert turning and profiling, compatible with BOMT 1304 inserts and equipped with internal coolant to support stable cutting conditions. 35 mm diameter for compact tool holders Internal coolant channel for improved chip evacuation Compatible with BOMT 1304 indexable inserts Four cutting edges for extended indexing life Predictable accuracy in confined spaces The compact 35 mm diameter and short overall length create a rigid set-up that reduces vibration and runout, enabling consistent results in tight tool stations. With an overall length of 35 mm and a mass of 0.128 kg, the head is intended for applications where space and stiffness are critical. The geometry is optimised for use with BOMT 1304 indexable inserts, which are widely available in negative-rake grades and provide reliable cutting edges for metal-removal tasks. This combination supports repeatable tolerances and reduced rework in production environments. Cooler cutting and improved surface quality An integrated internal coolant channel delivers cutting fluid directly to the cutting edge, which lowers cutting temperatures and enhances chip control. By guiding coolant to the insert contact zone, the system helps maintain tool edge integrity and can improve surface finish on the workpiece. For shops that process mixed batches, this feature contributes to longer insert life and fewer unscheduled index changes, translating into steadier throughput and less operator intervention during extended cycles. Fast indexing and robust clamping for uptime The head uses a Torx T10 drive and M3.5x8.5 fastening screw to secure inserts reliably while enabling fast replacement and accurate seating. With four cutting edges available per insert, the setup supports multiple indexings before a full replacement is required, lowering consumption and downtime. The fastening design is manufactured to withstand typical turning forces and preserve insert position, which is essential for maintaining dimensional consistency across serial parts. Seamless compatibility for workshop integration Designed for compatibility with inserts from Ingersoll and the BOMT 1304 family, the tool head integrates into standard lathe tool posts and holder systems with minimal adaptation. The compact format makes it suitable for turning, profiling and light grooving operations in both small-batch workshops and larger production lines. Supplied by Teknik Makina under the SKU T964TM, the head is a practical choice where predictable index life, coolant delivery and compactness are required for efficient machining cycles. Contact Metav Werkzeuge for tailored technical guidance and to secure the Teknik Makina T964TM with internal coolant for optimised machining performance — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T964TM Manufacturer: Teknik Makina Article: Corner tool head for BOMT 1304 indexable inserts Facts Diameter: 35 mm Overall length: 35 mm Weight: 0.128 kg Cutting edges: 4 Screw: M3.5x8.5 (Torx T10) eClass: 21181015 Special features Internal coolant Compatible with BOMT 1304 indexable inserts Compatible insert manufacturer: Ingersoll FAQ What insert type does the head accept? The head accepts BOMT 1304 indexable inserts; it is designed to seat these inserts securely for turning and profiling operations. Is the coolant internal or external? The tool head features internal coolant, supplying fluid directly to the cutting zone to improve chip control and tool life. How many usable cutting edges are available per insert? Inserts used with this head provide four cutting edges, allowing multiple indexings before replacement. Which fastening system secures the inserts? Inserts are fastened using a Torx T10 drive and an M3.5x8.5 screw for reliable clamping and straightforward replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm 90° Corner Milling Head For APKT 1003 Indexable Inserts, M2.5x5.5 Torx T8 - Teknik Makina
Take advantage of a compact, high‑rigidity tool head that delivers precise 90° shoulder milling and fast insert changes; the combination of a 16 mm shank, ø40 mm head and compatibility with APKT 1003 indexable inserts ensures stable cuts and consistent cycle times. Order via Metav Werkzeuge or consult product specialists for application-specific advice. Corner milling head – 90° head for APKT 1003 indexable inserts (Teknik Cutting Tools) The corner milling head is a 90° indexable tool head designed for precise shoulder and face milling with APKT 1003 inserts, suitable for compact toolholders and stiff machine setups. 90° cutting angle for precise shoulder milling Fits APKT 1003 indexable inserts by Korloy 16 mm shank, ø40 mm head for compact setups Secured with M2.5×5.5 Torx screw (T8) Consistent shoulder accuracy with minimal runout The compact indexable tool head has been engineered for repeatable shoulder and face milling, where a true 90° geometry reduces secondary operations. The combination of a 16 mm shank and a ø40 mm head delivers high rigidity, so cutting forces are transmitted cleanly into the holder and machine spindle. This stability translates into improved surface quality and dimensional adherence, lowering rework rates and keeping cycle times stable across batch runs. Familiar machining terminology is used throughout so decision making is straightforward for production planners and operators. Quick insert changes and reliable clamping minimise downtime Compatibility with APKT 1003 indexable inserts from Korloy supports familiar tooling standards and simplifies inventory management. The insert is secured by an M2.5×5.5 Torx screw and fitted using a T8 key, providing a dependable clamping method that avoids accidental loosening under heavy feed. Fewer and faster insert changes mean shorter tool‑change intervals on the shop floor and higher machine availability. Technical queries and requests for additional data are handled through Metav Werkzeuge’s consultancy services to support integration into existing tool setups. Compact footprint for versatile machine application With an overall length of 40 mm and a head diameter of 40 mm, the head’s compact form factor suits confined tool magazines and close‑quarter toolholders without compromising stiffness. The nominal mass of 0.277 kg balances inertial forces while remaining light enough for quick handling during setup. Designed for industrial use, the head supports practical shop workflows and is compatible with common indexable insert geometries, helping to rationalise tooling across milling operations and reduce supplier complexity. Contact Metav Werkzeuge for application recommendations, stock status and tailored advice on integrating the Teknik Cutting Tools corner milling head T176TM into existing machining centres Technical data Article number: T176TM Designation: Corner milling head for APKT 1003 indexable inserts Brand: Teknik Cutting Tools (Teknik Makina) Facts Shank diameter: 16 mm Head diameter: 40 mm Overall length: 40 mm Weight: 0.277 kg Cutting angle: 90° Cutting edges: 5 Special features Compatible with APKT 1003 indexable inserts (Korloy) Secured with M2.5×5.5 Torx screw; Torx key T8 Compact design for confined toolholders FAQ Which inserts fit the tool head? The head accepts APKT 1003 indexable inserts; compatibility is confirmed for Korloy inserts designed to that designation. What mounting shank is required? A 16 mm shank holder is required; the head was manufactured for use with 16 mm toolholders and compact setups. How is the insert fixed to the head? The insert is clamped using an M2.5×5.5 Torx screw and tightened with a T8 key for secure retention during milling. Is the head suitable for heavy roughing operations? The compact geometry and high rigidity make the head well suited to common shoulder and face milling tasks; selection should be matched to machine power and feed rates for optimal life. What are the key dimensions to check before ordering? Verify the 16 mm shank, ø40 mm head, and overall length 40 mm against the machine’s toolholder envelope and magazine capacity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm 90° Corner Tool Head for ADKT 1505 Indexable Inserts, 4 Cutting Edges, 16mm Shank - Teknik Makina
Take advantage of the combination of secure clamping, a defined 90° cutting geometry and compatibility with ADKT 1505 indexable inserts to maintain steady cycle times and predictable tool life; order the Corner tool head directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head T200TM — 90° tool head for ADKT 1505 indexable inserts (Teknik Makina) A Corner tool head T200TM engineered for turning and facing operations with ADKT 1505 indexable inserts, delivering repeatable 90° cutting performance in industrial production environments 90° cutting geometry for precise facing Compatible with ISCAR ADKT 1505 inserts 16 mm shank for secure clamping Four cutting edges for extended service life Accurate 90° geometry for repeatable faces and shoulders The T200TM is built around a 90° cutting geometry that simplifies setup for facing and shoulder operations. By using standard ADKT 1505 indexable inserts (compatible with ISCAR), the head provides a predictable cutting line and consistent surface finish. The combination of defined insert seating and the head’s rigid interface reduces vibration and improves dimensional repeatability, which translates into fewer reworks and steadier production throughput. Secure clamping and straightforward maintenance for reliable shifts Clamping integrity is central to performance: the head features a 16 mm shank that ensures stable seating in standard toolholders and a fixation system secured with an M4x10 Torx screw operated by a T15 key. This arrangement keeps the insert pocket firmly closed under load and facilitates fast index changes. Routine service is minimal — the Torx connection limits cam-out and wear, so maintenance intervals are extended without sacrificing operational safety. Compact design engineered for industrial use A compact footprint supports versatile machine integration: the head measures 40 mm diameter with a 45 mm overall length and weighs 0.27 kg, making it suitable where clearance and balance are critical. The small mass contributes to lower centrifugal forces at speed and helps preserve spindle bearings, while the robust construction and first-class metalworking in the component ensure long in-service life. The presence of four cutting edges on the selected inserts allows multiple indexes per insert, improving cost-efficiency per cutting edge. Practical application advice to speed setup and reduce downtime The indexable-head concept streamlines production: replace worn inserts quickly and restore cutting performance without reclamping the entire assembly. For facing, ensure the toolholder accepts the 16 mm shank and that the insert seat is clean before fitting a fresh ADKT 1505 insert. Correct torque on the M4x10 Torx screw and the use of the T15 key secure the insert and prevent micro-movement during heavy cuts. This pragmatic approach to handling reduces set-up time and keeps machines cutting rather than idling. Contact Metav Werkzeuge today for personalised application support on the Teknik Makina T200TM 90° corner tool head and secure delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T200TM Brand: Teknik Makina Product: Corner tool head for ADKT 1505 indexable inserts Shank diameter: 16 mm Overall length: 45 mm Diameter: 40 mm Weight: 0.27 kg Cutting angle: 90° Cutting edges: 4 Torx screw: M4x10 Torx key: T15 Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Application: Turning / facing with indexable inserts Design: 90° corner head Notes: First-class metalworking, long service life FAQ What inserts fit this turning head? The Corner tool head T200TM is designed for ADKT 1505 indexable inserts; it is compatible with inserts from ISCAR marked ADKT 1505. Is a special key required to change the insert? An M4x10 Torx screw secures the insert; a T15 Torx key is used to tighten and release it on the T200TM. Which toolholder accepts the head’s shank? The head has a 16 mm shank diameter and requires a toolholder that accepts a 16 mm shank for safe clamping and correct tool alignment. What benefits do four cutting edges provide? Using inserts with four usable edges increases effective cutting life per insert and reduces index-change frequency, improving uptime with the T200TM head. Is the head suitable for heavy-duty facing? The compact, rigid design and secure Torx clamping make the head appropriate for standard facing loads; ensure the machine and holder match the required cutting parameters. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm 90° Corner Tool Holder For BDMT 11T3 Indexable Inserts, 5 Cutting Edges, M2.5x5.5 Torx Screw - Teknik Makina
Take advantage of a compact, rigid 90° corner tool head that combines precise shoulder finishes, fast insert changes and standard shank compatibility to keep cycle times consistent; order the tool via Metav Werkzeuge or consult the technical team for application guidance. Eckmesserkopf T533TM — 90° corner tool head for BDMT 11T3, Ø40, shank 16 mm (Teknik Makina) The Eckmesserkopf T533TM is a 90° corner turning head designed for use with BDMT 11T3 indexable inserts, intended for accurate shoulder turning and external profiling in general workshop and production turning applications 90° cutting angle for accurate shoulder turning Compatible with BDMT 11T3 Kyocera inserts 16 mm shank for standard toolholders M2.5x5.5 Torx fastening, T8 key required Consistent shoulder quality through rigid geometry The 90° construction delivers a repeatable contact geometry that reduces vibration and variation at the cut; the 90° cutting angle and compact head body provide a stable platform for finishing shoulders and steps. Compatibility with BDMT 11T3 indexable inserts means the tool head benefits from standardised insert geometry, allowing predictable cutting engagement and surface finish. With a head Ø40 mm and a balanced mass of 0.224 kg, the turning head minimises deflection while remaining easy to handle during setup. The result is improved process reliability and fewer reworks in series production. Faster insert clamping and low-maintenance service routines Clamping is secured by an M2.5x5.5 Torx screw and requires a T8 key, enabling quick insert changes and shortened downtime between operations. The head provides five cutting edges per insert seat, extending time between indexings and lowering consumable costs per component. The simple fastening routine and standardised hardware reduce toolroom complexity and mean familiar maintenance procedures can be followed without special tooling. This efficiency contributes directly to higher machine availability and lower operational overhead. Stock and machine compatibility for streamlined procurement With a 16 mm shank diameter and a nominal head diameter of Ø40 mm, the unit fits a broad range of standard turning toolholders and turret systems, supporting modular tool setups across different machine types. The compact overall length (40 mm) helps manage tool projection and minimise overhang, which is beneficial for spindle load and surface integrity. Compatibility with Kyocera BDMT-style inserts simplifies spare parts management and allows purchasing teams to consolidate insert stock, improving inventory turnover and procurement predictability. Reliable choice for demanding turning tasks Built for routine workshop use, the head combines straightforward mechanical design with established insert standards to deliver dependable results in shoulder turning and profiling tasks. The clear indexable system and standard fastenings mean operators can focus on cutting parameters rather than special tool handling. When fitted into a controlled process, this configuration supports consistent part tolerances and repeatable cycle times, which is essential for efficient batch production and quality assurance. For precision 90° turning with proven compatibility, request supply and application advice for the Teknik Makina T533TM from Metav Werkzeuge — technical enquiries: info@metav-werkzeuge.com or tel. +49 2822 7131930 Technical data Article number: T533TM Manufacturer: Teknik Makina Product: Eckmesserkopf for BDMT 11T3 indexable inserts Dimensions & weights Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Weight: 0.224 kg Cutting angle: 90° Features & compatibility For BDMT 11T3 indexable inserts Compatible insert manufacturer: Kyocera Torx screw: M2,5x5,5 Torx key: T8 Number of usable cutting edges: 5 SKU: T533TM FAQ Which inserts fit this corner tool head? The corner tool head accepts BDMT 11T3 indexable inserts and is specified as compatible with Kyocera BDMT 11T3 inserts. What shank size is required for mounting? Mounting requires a toolholder or turret accepting a 16 mm shank diameter, matching standard 16 mm toolposts. How is the insert secured in the head? The insert is clamped with an M2.5x5.5 Torx screw; a T8 key is used for tightening and removal. Is the head suitable for high-speed turning? The design offers good rigidity for many turning operations; cutting speed suitability depends on insert grade and machine capabilities rather than the head alone. What are the key dimensions to check before ordering? Important dimensions are head Ø40 mm, overall length 40 mm, and shank 16 mm; the SKU is T533TM for ordering clarity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm 90° Corner Turning Head For APKT 1705 Indexable Inserts, M4x10 Torx Screw - Teknik Makina
Take advantage of a compact, 90° indexable insert head that combines sturdy clamping and simple fastening for repeatable turning operations; its 16 mm shank and 40 mm diameter reduce overhang for greater rigidity. Order the component directly via Metav Werkzeuge or consult the team for application-specific advice. Corner tool head T550TM — 90° head for APKT 1705 indexable inserts (Teknik Makina) The Corner tool head T550TM is a compact 90° turning head designed for APKT 1705 indexable inserts, intended for precise external turning where limited clearance and secure fastening are required 90° cutting geometry for perpendicular turning Compatible with APKT 1705 indexable inserts 16 mm shank for compact toolholder setups Torx M4x10 fastening, T15 key required Stable perpendicular cuts for reliable process results The 90° geometry provides a predictable cutting orientation that is especially useful where perpendicular shoulders or facing operations are frequent; by accepting APKT 1705 indexable inserts, the head ensures rapid insert changes without regrinding, shortening machine downtime. This configuration supports a controlled cutting edge position and straightforward reorientation, which translates into consistent component dimensions and reduced rework in batch production. The design focuses on operational stability rather than decorative details, so setup time is minimised and repeatability is improved. Compact dimensions for reduced overhang and better rigidity With a 16 mm shank, 45 mm overall length and 40 mm diameter, the tool head suits tight toolpost arrangements and compact lathes. The relatively low mass (0.239 kg) and restrained projection lower bending moments at the holder, which helps to reduce chatter and improves surface finish on the workpiece. In practice, the compact form factor allows shops to maintain higher feed rates in constrained spaces while keeping the cutting forces aligned — a straightforward way to raise productivity on small to medium-sized turning centres. Secure fastening and fast changeover to keep production running Fastening is handled with an M4x10 Torx screw and requires a T15 key, delivering reliable clamp force and minimising slippage under load. The Torx interface offers better torque transfer and less cam‑out than conventional crosshead screws, so clamping is both secure and repeatable. The head is specified to work with Taegutec inserts in the APKT 1705 format, allowing straightforward procurement and replacement. This combination of secure fixing and standardised insert format reduces downtime during tool changes and supports stable process control over longer production runs. Contact Metav Werkzeuge for tailored application advice and secure supply of the T550TM corner tool head; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: T550TM Manufacturer: Teknik Makina Product: Corner tool head (Eckmesserkopf) Compatibility: for APKT 1705 indexable inserts Compatible insert brand: Taegutec ECLASS: 21181015 Core dimensions and weights Shank diameter: 16 mm Diameter: 40 mm Overall length: 45 mm Cutting angle: 90° Number of cutting edges: 4 Weight: 0.239 kg Features and fastening Fastening screw: M4x10 Torx Torx key: T15 Intended application: turning, facing with indexable inserts SKU reference: T550TM Manufacturer: Teknik Makina FAQ What inserts fit this tool head? The tool head accepts APKT 1705 indexable inserts; the T550TM is specified for that insert format and is compatible with Taegutec APKT 1705 types. What shank size is required for the toolpost? This turning head uses a 16 mm shank, so the toolholder or turret pocket must accommodate a 16 mm shank diameter. Which screw and key secure the insert head? Fixing is via an M4x10 Torx screw; a T15 key is required for tightening and loosening. Is the T550TM suitable for compact lathes? Yes, the compact dimensions (40 mm diameter, 45 mm overall length) and modest weight make the T550TM well suited to confined toolpost arrangements on smaller lathes. How many cutting edges are provided? The specification lists 4 cutting edges; insert geometry and edge count depend on the APKT 1705 inserts used. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm 90° Corner Turning Head for BDMT 1704 Indexable Inserts, M4x10 Torx Screw - Teknik Makina
Take advantage of a compact, 90° cutting geometry and proven compatibility with BDMT 1704 indexable inserts to ensure efficient shoulder machining and reliable repeatability. The robust 16 mm shank and Ø40 mm head deliver a stable tool position with quick insert changes; order the component directly via Metav Werkzeuge or consult their specialists for application advice. 90° Corner Cutter Head for BDMT 1704 Indexable Inserts (Teknik Makina) — 16 mm shank, Ø40 mm head A 90° corner cutter head designed for turning and shoulder operations using BDMT 1704 indexable inserts, offering a compact solution for precision facing and grooving tasks Compact 16 mm shank for tight toolholders 90° cutting angle for accurate shoulder cuts Compatible with Kyocera BDMT 1704 inserts Ø40 mm head with four cutting edges Precise shoulder machining with 90° geometry The compact head is engineered for precision during shoulder and face turning. Its 90° cutting angle ensures consistent corner definition and repeatable part geometry, reducing secondary operations. A firm 16 mm shank provides stable clamping in compact holders, which helps to limit vibration and improve surface finish. This combination is particularly suitable for medium to high-volume production where cycle-time stability is essential. Fast insert changes and proven insert compatibility Designed for BDMT 1704 indexable inserts, the head supports rapid edge changes and predictable tool life. The insert system, compatible with Kyocera standards, allows multiple index positions from a single insert — a cost-effective approach to keep machine uptime high. The arrangement of four usable cutting edges extends service intervals, while the secure Torx fastening system simplifies maintenance without requiring specialised tools. Compact design that stabilises cutting performance The Ø40 mm head and modest overall length balance reach and stiffness to maintain cutting stability at the workpiece interface. The head’s mass and geometry are optimised to reduce deflection during moderate to heavy cuts, supporting reliable dimensional accuracy. With a weight of 0.19 kg, the assembly is lightweight enough for quick tool changes yet substantial enough to resist chatter in typical turning operations. Maintenance-friendly assembly and fast setup Assembly and replacement are straightforward thanks to the standardised Torx fixings. The head is secured with an M4x10 Torx screw and a T15 Torx key is used for tightening, so a common workshop toolset is sufficient for routine service. Clear mechanical retention and simple fastener access minimise downtime and allow predictable torque application, helping to maintain consistent clamping pressure and cutting geometry. Contact Metav Werkzeuge to confirm suitability for specific applications and to request delivery from their Emmerich quality hub — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: T537TM Manufacturer: Teknik Makina Name: 90° corner cutter head Designation: for BDMT 1704 indexable inserts Facts Shank diameter: 16 mm Head diameter: 40 mm Overall length: 40 mm Weight: 0.19 kg Cutting angle: 90° Cutting edges: 4 Special features Compatible with BDMT 1704 indexable inserts Recommended insert brand: Kyocera Torx screw: M4x10 Torx key size: T15 FAQ What insert type fits this corner cutter head? The corner cutter head is designed for BDMT 1704 indexable inserts, which are compatible with Kyocera-style insert geometries and provide multiple usable edges for economical machining. Is the head suitable for compact toolholders? Yes, the head’s 16 mm shank and compact overall length make it suitable for tight toolholder setups where space is limited but rigidity is required. Which fastener and key are required for insert clamping? Insert and head fixation use an M4x10 Torx screw, tightened with a T15 Torx key, allowing standard workshop tools to perform secure assembly. How many cutting edges are available per insert in this setup? The system supports inserts with four cutting edges, extending service life and reducing the frequency of insert changes during production. Can this head be used with inserts from other manufacturers? The head is specified for BDMT 1704 inserts and lists Kyocera compatibility; inserts from other manufacturers matching the BDMT 1704 geometry may be used if they conform to the same dimensional and seating standards. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm 90° Corner Turning Tool Head for XOMX 1204 Indexable Inserts, M3.5x8.5 Torx T10 - Teknik Makina
Take advantage of a compact, high-stability solution for 90° corner turning: the combination of a secure 16 mm shank and SECO-compatible clamping for XOMX 1204 inserts ensures repeatable results and minimal downtime. Order this toolholder through Metav Werkzeuge or consult our team for application-specific guidance. Corner toolholder T510TM – 90° corner toolhead for XOMX 1204 indexable inserts by Teknik Makina Corner toolholder T510TM for 90° turning operations, engineered for precision machining with XOMX 1204 indexable inserts in industrial turning centres 90° cutting angle for precise corner turning SECO-compatible for XOMX 1204 indexable inserts 16 mm shank diameter for stable clamping Torx screw M3.5x8.5 with T10 key specification Reliable 90° corner turning with consistent clamping The T510TM is designed for repetitive corner and shoulder turning where geometric accuracy matters. Its 90° cutting angle offers predictable engagement with the workpiece, reducing vibration and improving surface quality during shoulder cuts. Built around a 16 mm shank, the toolholder provides a secure connection to standard tool posts, which translates into stable cutting conditions and prolonged insert life. The design focuses on reducing setup variation so that cycle-to-cycle repeatability is maintained in batch production. Fast insert changes and system compatibility Engineered for indexable inserts of the XOMX 1204 type, the holder accepts SECO-compatible grades, simplifying procurement and inventory management. The clamping system uses a Torx screw M3.5x8.5 (T10), a commonly available fastening standard that facilitates quick insert replacement and consistent seat pressure. For operations where tool change time and machine uptime are critical, this compatibility and the straightforward screw interface help to keep production flowing with minimal interruption. Compact head geometry for confined setups With a head diameter of 40 mm and a total length of 40 mm, the holder is compact enough to be used in tight turret positions or multi-op setups without compromising rigidity. The compact form factor allows closer approach to workpiece contours and supports multi-insert turning strategies on small to medium workpieces. The relatively low mass of 0.25 kg also reduces centrifugal loading at higher spindle speeds, helping to maintain balance and accuracy in dynamic machining operations. Practical benefits for workshop efficiency Choosing this corner toolhead reduces the number of bespoke holders required for standard XOMX 1204 inserts, streamlining tooling assortments in the workshop. The combination of SECO compatibility, a common T10 Torx interface and a robust 16 mm shank delivers a pragmatic balance of availability, serviceability and performance. For shops focused on steady production with predictable maintenance cycles, that balance supports lower downtime and simpler tool management. Choose the Teknik Makina T510TM for dependable 90° corner turning and contact Metav Werkzeuge for a tailored consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T510TM Manufacturer: Teknik Makina Designation: Corner toolholder for XOMX 1204 indexable inserts Secondary designation: for XOMX 1204 Indexable Inserts eClass: 21181015 Numbers / Core technical data Shank diameter: 16 mm Head diameter: 40 mm Total length: 40 mm Weight: 0.25 kg Cutting angle: 90° Cutting edges: 4 Special features / Versions Compatible with SECO XOMX 1204 indexable inserts Torx screw: M3.5x8.5 Torx key specification: T10 SKU: T510TM FAQ Which inserts fit this toolholder? The toolholder accepts XOMX 1204 indexable inserts and is compatible with SECO-manufactured XOMX 1204 grades for flexible choice of cutting materials and coatings. What shank size is required for mounting? A 16 mm shank diameter is specified for stable clamping; the holder is designed to seat in tool posts that accept a 16 mm shank. What is the cutting angle and typical application? The unit is equipped with a 90° cutting angle, making it suitable for corner turning and shoulder profiling in general turning applications. Which fastening hardware does the holder use? Clamping is achieved using a Torx screw M3.5×8.5; the corresponding key size is T10, which ensures repeatable clamping torque and quick insert changes. Is the toolhead suitable for high-speed turning? The compact geometry and low mass support dynamic stability, but final suitability for high-speed turning depends on machine capability, insert grade and cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm 90° External Turning Tool Holder For ANHX 1004 Indexable Inserts, M3x7 Screw, T8 Key - Teknik Makina
Take advantage of a compact, robust 90° corner solution that accepts Palbit ANHX 1004 indexable inserts and mounts on a 16 mm interface for secure, repeatable results; order or request advice via Metav Werkzeuge for straightforward integration into the production line. Corner tool head — 90° for ANHX 1004 indexable inserts (Teknik Makina T656TM) The corner tool head is a compact 90° turning head designed for external machining and precise corner cuts using ANHX 1004 indexable inserts. Precision 90° cutting angle for corner work Compatible with Palbit ANHX 1004 inserts 16 mm shank for secure toolholder mounting Compact 40 mm head with four cutting edges Maximise turning accuracy with a 90° cutting angle The compact holder provides a 90° cutting angle that keeps cutting forces predictable and concentrates the geometry where corner accuracy matters most. Fitted for ANHX 1004 indexable inserts, this head converts each insert index into renewed cutting life, reducing tool-change frequency and improving uptime. The presence of four cutting edges extends service intervals, while the use of indexable technology keeps machining consistent across batches. The design supports repeatable results in serial turning and intermittent finishing tasks. Secure mounting and quick, reliable clamping A 16 mm shank ensures firm seating in standard toolholders and minimises runout when compared with smaller interfaces; the nominal shank diameter contributes to consistent tool alignment. Clamping is achieved with an M3x7 torx screw and the matching T8 key, providing secure locking without the need for special fixtures. The straightforward fastening arrangement allows fast setup changes and predictable torque behaviour, which helps keep cycle times stable in mixed-production environments. Compact form for confined workspaces and steady performance With a 40 mm head diameter and an overall length of 40 mm, the holder keeps the cutting point close to the spindle centre, improving rigidity and reducing overhang-induced vibration. At approximately 0.25 kg, the assembly is light enough for agile tool changes yet robust enough for everyday workshop use. The compact package is ideal where access is restricted or where multiple tool stations operate in close proximity, enabling efficient nesting of tools without compromise to cutting reliability. Low-maintenance operation and predictable throughput The indexable concept reduces complex maintenance to a few quick actions: index, tighten and resume production. Replaceable inserts mean that wear does not require discarding the entire holder, so shop-floor maintenance is simplified and spare-part inventories remain compact. The holder’s geometry and straightforward fixing method support predictable performance and easier process documentation, helping to plan tool life and control cost-per-part across series production. For fast technical advice and availability of the Teknik Makina T656TM corner tool head, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and delivery from Emmerich Technical data Article number: T656TM Manufacturer: Teknik Makina Suitable for inserts: ANHX 1004 (Palbit) SKU: T656TM Core data Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Cutting angle: 90° Cutting edges: 4 Weight: 0.25 kg Torx screw: M3x7 Torx key: T8 Features For ANHX 1004 indexable inserts Compatible with Palbit inserts 90° corner head geometry Compact design for confined spaces Secure clamp with M3x7 torx screw FAQ Which indexable inserts fit this holder? The T656TM corner tool head accepts Palbit ANHX 1004 indexable inserts and is specified for that insert form. What shank diameter is required for mounting? The holder uses a 16 mm shank interface and is designed for compatible toolholders with that diameter. How many cutting edges are available per insert position? The assembly is built around a head with four cutting edges, enabling multiple indexings before insert replacement. Which screw and key are required for clamping the insert? Clamping is performed with an M3x7 torx screw tightened using a T8 torx key. Is the head suitable for tight access or compact workpieces? Yes — the 40 mm head diameter and 40 mm overall length make the holder suitable for confined machining areas and closely packed tooling setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Angle Turning Head 90° For R390-11T3 Indexable Inserts, M2.5x7 Torx Screw - Teknik Makina
Take advantage of the combination of 90° cutting geometry, broad compatibility with Sandvik R390-11T3 indexable inserts and a compact 16 mm shank for reliable workshop integration; order the Corner Turning Head directly via Metav Werkzeuge or ask our consultants if needed Corner Turning Head — 90° turning head for R390-11T3 indexable inserts (Teknik Makina) The Corner Turning Head is a 90° external turning head designed for shoulder and corner machining with R390-11T3 indexable inserts, suitable for toolposts with a 16 mm shank diameter 90° cutting angle for precise shoulder turning Compatible with Sandvik R390-11T3 inserts 16 mm shank diameter for standard toolholders Torx M2.5×7 screw with T8 key for secure clamping Accurate corners and predictable results for production turning The compact turning head delivers a defined 90° cutting geometry, which makes shoulder and corner machining repeatable and reliable in series production. By using a head designed for the R390-11T3 insert form, the system ensures consistent chip flow and contact conditions; this simplifies process planning and reduces set-up variation. The combination of a standardised shank diameter and a short overall length supports stable clamping in modern tool posts, lowering vibration and improving surface finish for turned components. Secure clamping and fast insert replacement to reduce downtime Clamping is managed via a Torx M2.5×7 screw operated with a T8 key, providing firm retention of the indexable insert and straightforward replacement. Quick access to the clamping screw means insert changes are carried out with minimal interruption, which increases machine uptime and productivity. The head is specified with five cutting edges and a compact mass (approx. 0.225 kg), resulting in balanced handling during set-up and steady performance in short-to-medium batch work. Designed for workshop compatibility and easy integration With a 16 mm shank diameter and a head diameter of 40 mm combined with an overall length of 40 mm, the unit fits many standard holders without adjustment. The geometry is intended to match typical turning sequences used in maintenance and small-batch manufacturing, enabling retrofit into existing tool packs. Where toolholder and insert standardisation matters, the compatibility with Sandvik insert dimensions reduces the need for multiple insert types, simplifying stock and reordering routines. Practical advantages that support everyday metalworking The turning head’s compact dimensions and defined contact geometry help maintain stable cut conditions on interrupted cuts and shoulder faces. For operations where repeatability is essential, the head’s construction supports reproducible seat and clamping conditions, translating into consistent tolerances and fewer rejected parts. The product is appropriate for machining tasks in industrial workshops and precision maintenance where robust, standard-compatible tooling drives operational efficiency. For reliable corner turning with proven Sandvik R390-11T3 compatibility, request procurement advice or place an order through Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and availability Technical Data Article number: T577TM Manufacturer: Teknik Makina Brand: Teknik Makina Compatible inserts: R390-11T3 (Sandvik) Torx screw: M2.5×7 Torx key: T8 Core technical figures Shank diameter (aufnahme): 16 mm Head diameter (durchmesser): 40 mm Overall length (gesamtlänge): 40 mm Cutting angle (schnittwinkel): 90° Number of cutting edges (schneiden): 5 Weight: 0.225 kg Special features Designed for R390-11T3 indexable inserts Secure Torx clamping system Compact construction for standard toolholders Suitable for shoulder and corner turning SKU: T577TM FAQ Which insert type fits this turning head? The head is designed for R390-11T3 indexable inserts and matches Sandvik insert geometry for reliable seating and repeatable cutting conditions. What shank size is required for mounting? Mounting requires a toolholder that accepts a 16 mm shank; the head’s compact length and diameter support common toolpost arrangements. How is the insert secured and which key is needed? Insert retention is achieved with a Torx M2.5×7 screw; a T8 Torx key is specified for tightening and loosening. Is the head suited for heavy-duty roughing? The compact geometry and defined 90° cutting angle are optimised for shoulder finishing and general turning; for heavy roughing, assess machine power and insert grade before use with this head. What are the physical dimensions and weight? The turning head has a 40 mm head diameter, 40 mm overall length and weighs approximately 0.225 kg, supporting balanced handling and stable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Cutting Head for ADKT 10T3 Indexable Inserts with Internal Coolant, 90° - Teknik Makina
Benefit from a compact, rigid design with internal coolant and compatibility with ADKT 10T3 indexable inserts for stable turning performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head for ADKT 10T3 indexable inserts — 40 mm, internal coolant (Teknik Makina) A durable corner tool head designed for turning operations with ADKT 10T3 indexable inserts, offering integrated coolant supply and a compact 40 mm form factor for stable engagement in CNC lathes and turning centres. 40 mm head diameter Integrated internal coolant supply Compatible with ADKT 10T3 inserts Five cutting positions Greater process stability through rigid design and coolant The compact 40 mm head delivers increased stiffness at the cutting zone, which reduces vibration and improves surface consistency during finishing passes. The 40 mm dimension and lightweight construction contribute to controlled tool overhang, while the internal coolant channel directs coolant to the cutting edge, aiding chip evacuation and extending insert life. These engineering choices are intended to support predictable cycle times in serial production and precision reworking. Minimised downtime with proven indexable insert compatibility Compatibility with ADKT 10T3 insert geometry—commonly supplied by Korloy—means quick insert indexing and minimal set-up changeover. The holder accepts inserts with indexed positions, providing five cutting positions that can be rotated as edges wear, reducing consumable costs per component. Fast removal and secure clamping are achieved via the specified torx fastenings, ensuring repeatable seating and reliable tool life. Servicing and handling that keep workshops productive Maintenance routines are simplified by the standardised fastener arrangement: a Torx T8 key interfaces with the head and the retaining screw specified as M2.5x5.5 ensures consistent clamp torque. The modest mass of 0.18 kg improves dynamic behaviour in high-speed routines and reduces spindle load during rapid acceleration. Careful selection of fastener torque and periodic inspection of coolant passages will preserve performance and help avoid unplanned stops. Where this tool head adds the most value Engineered for precision turning tasks in small-batch production and industrial workshops, this corner tool head supports operators aiming to improve surface quality and reduce insert consumption. The combination of indexable inserts, directed coolant, and compact geometry makes it a practical choice where repeatability, short changeovers and reliable clamping are priorities for throughput and quality control. For specification confirmation, procurement or technical guidance on the Teknik Makina corner tool head (SKU T696TM), contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid supply. Technical data SKU: T696TM Product type: Corner tool head Label: 40mm Eckmesserkopf ADKT 10T3 L40mm mit Innenkühlung Manufacturer: Teknik Makina Core specifications Diameter: 40 mm Overall length: 40 mm Weight: 0.18 kg Cutting positions: 5 Torx key: T8 Torx screw: M2.5x5.5 Internal coolant: yes Special features Compatible with ADKT 10T3 indexable inserts Compatible insert manufacturer: Korloy eClass: 21181015 SKU: T696TM FAQ Which insert type fits this head? The corner tool head accepts ADKT 10T3 indexable inserts; compatibility is specified for ADKT 10T3 geometries. Does the tool head provide internal coolant? Yes, the holder is supplied with internal coolant to direct cutting fluid to the insert edge for improved cooling and chip control. How many indexed positions are available per insert? The design provides five cutting positions, allowing rotation to fresh edges as wear occurs. What fastening tools and screws are required? Insert retention uses a Torx T8 interface and the retaining screw specified is M2.5x5.5. Is this head suitable for production CNC lathes? The holder is intended for precision turning operations on CNC lathes and turning centres where quick indexable insert changes and coolant delivery are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Cutting Head for XEKT 1904 Indexable Inserts L45mm Internal Coolant - Teknik Makina
Take advantage of the combination of precise 40 mm cutting diameter, internal coolant, and compact overall length for consistent cycle times and improved chip control; order or request assistance via Metav Werkzeuge to integrate this corner tool head into existing turning setups. Corner tool head T365TM – 40 mm diameter with internal coolant (for XEKT 1904 Indexable Inserts) by Teknik Makina A corner tool head engineered for precision shoulder and corner turning with XEKT 1904 indexable inserts, offering integrated coolant supply for reliable chip control in CNC turning operations. Precision 40 mm cutting diameter Internal coolant for optimal chip evacuation Compatible with XEKT 1904 indexable inserts Three cutting edges for balanced machining Consistent cutting performance through compact geometry The 40 mm diameter cutting geometry combined with a 45 mm overall length produces a compact solution that reduces overhang and helps maintain stable cutting conditions. The head's three cutting edges are arranged to distribute cutting forces evenly, which supports constant cycle times and a predictable surface finish. With a mass of 0.192 kg, inertia is lowered, reducing susceptibility to chatter on medium to short tool projections; this leads to higher process reliability and fewer rework cycles. Secure mounting and straightforward serviceability Designed for standardised fastening, the head uses T15 Torx drive for the clamping screws and accepts M4x8.5 Torx screws, enabling secure torque transmission and simple maintenance routines. The tool accepts XEKT 1904 indexable inserts and is compatible with inserts from Korloy, allowing quick insert changes and inventory harmonisation in mixed-brand workplaces. A 16 mm mounting interface ensures compatibility with typical toolholder systems used in industrial turning centres. Improved cooling, chip control and surface quality Built-in internal coolant directs cutting fluid close to the cutting edge, improving thermal management and assisting chip breakage. This targeted cooling reduces heat-related wear on the insert and promotes consistent dimensional results over longer tool life. The 90° cutting angle design is particularly effective for square-shoulder operations and gives reliable reference surfaces without complex tool reorientation, simplifying setup times for batch production. Practical advantages for workshop and production environments The head is suited to workshops seeking a compact, versatile cutting solution for external turning and shoulder profiling where fast insert changes and coolant-fed machining are desirable. The compatibility with widely used XEKT 1904 inserts and Korloy supply chains helps reduce procurement complexity. With standard fasteners and a design focused on stable engagement, the head supports efficient tool changeovers, lower downtime and a more predictable process flow in small to mid-sized turning operations. Contact Metav Werkzeuge for advice on integrating the Teknik Makina T365TM corner tool head with internal coolant into production setups and to request application guidance from our Emmerich-based specialists. Technical data SKU: T365TM Product: Corner tool head Brand: Teknik Makina Facts Diameter: 40 mm Overall length: 45 mm Weight: 0.192 kg Mounting bore: 16 mm Cutting edges: 3 Cutting angle: 90° Torx key size: T15 Torx screw: M4x8.5 Internal coolant: yes Special features Compatible inserts: XEKT 1904 Compatible insert supplier: Korloy ECLASS: 21181015 Label: 40mm Eckmesserkopf XEKT 1904 L45mm mit Innenkühlung FAQ What insert type fits this head? The head is specified for XEKT 1904 indexable inserts; it is also compatible with inserts from Korloy when used with the Teknik Makina T365TM corner tool head. Is the coolant fed through the tool body? Yes, internal coolant is integrated in the T365TM, enabling coolant delivery directly to the cutting zone for improved chip evacuation and thermal control. Which fastening hardware is required for mounting? Mounting and clamp screws for the T365TM use a T15 Torx drive and M4x8.5 Torx screws as specified for secure assembly. What operations is this head best suited to? The corner tool head is optimised for 90° shoulder turning and profiling tasks on CNC lathes, where compact geometry and coolant-fed cutting improve consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Cutting Head For XNKT 0604 Indexable Inserts, 90° Cutting Angle, M3x7 Torx Screw - Teknik Makina
Take advantage of a compact, rigid turning solution that combines precise 90° cutting geometry with broad compatibility; the robust Torx clamping and 16 mm shank ensure repeatable seating and vibration-resistant performance. Order the component directly via Metav Werkzeuge or consult the technical team for application advice. Corner tool head T853TM — Corner turning head for XNKT 0604 indexable inserts (Teknik Makina) The Corner tool head T853TM delivers a secure, 90° turning option for lathe and CNC finishing operations, designed specifically for XNKT 0604 indexable inserts and compatible with Korloy inserts. Secure Torx M3x7 clamping Fits XNKT 0604 inserts (Korloy) 16 mm shank for rigid mounting 90° cutting angle for square shoulders Precision and stability for consistent turning results The head is engineered to provide repeatable geometry in shoulder turning and profiling. With a defined 90° cutting angle and a 16 mm shank for firm spindle seating, the component reduces deflection during interrupted cuts and maintains tool path accuracy. The combination of a compact diameter 40 mm head and total length 40 mm offers a short overhang that contributes to lower vibration and improved surface finish. These measurable attributes translate into fewer reworks and predictable cycle times on production runs. Quick, reliable clamping for faster set-up The component uses a Torx M3x7 clamping screw secured with a T8 key, enabling fast and secure insert retention. The Torx interface concentrates torque at the screw head for consistent clamp force and reduced screw cam-out, which supports frequent index changes without loss of seating precision. Compatibility with Korloy XNKT 0604 indexable inserts shortens procurement and inventory complexity for workshops that standardise on that insert family, simplifying changeovers and spare-part management. Designed for workshop efficiency and compatibility Weighing just 0.219 kg, the head balances low mass with mechanical rigidity, allowing agile handling during tool changes while contributing minimal centrifugal load at higher spindle speeds. The six cutting-edge orientation supports common indexable insert geometries, making the holder suitable for finishing and semi-finishing passes where controlled chip flow and tool life are priorities. The compact form factor and standardised mounting facilitate integration into existing tool turrets and multi-station toolposts. Practical benefits explained for procurement and operators Selecting this head reduces inventory variety through standard compatibility and delivers a tangible improvement in process reliability via robust clamping and short overhang. The standardised 16 mm mounting diameter is a common fit in workshop tooling systems, easing retrofits. For operators less familiar with insert tooling: an indexable insert is a replaceable cutting tip; the head secures that tip and defines its cutting angle, so maintaining correct clamp torque and using the specified T8 key ensures optimal seating and predictable wear patterns. Contact Metav Werkzeuge for tailored application advice and secure the Teknik Cutting Tools Corner tool head T853TM with 16 mm shank and Torx M3x7 clamping—phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: T853TM EClass: 21180902 Manufacturer: Teknik Cutting Tools Numbers Diameter: 40 mm Total length: 40 mm Shank diameter: 16 mm Weight: 0.219 kg Cutting angle: 90° Cutting edges: 6 Features For XNKT 0604 indexable inserts Compatible with Korloy inserts Torx screw M3x7 clamping Torx key size T8 FAQ What size of insert does this head accept? The head accepts XNKT 0604 indexable inserts and is compatible with Korloy inserts in that format. Which shank diameter is required for mounting? Mounting requires a toolholder or turret accepting a 16 mm shank. What type of clamping screw is used and which key is required? Clamping uses a Torx M3x7 screw and is tightened with a T8 key for consistent clamp force. Is the head suitable for shoulder turning at 90°? Yes, the head is specified with a 90° cutting angle, designed for square shoulder and corner turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Head For 3PKT 1505 Indexable Inserts With Internal Coolant, 90° - Teknik Makina
Take advantage of a compact, rigid design that combines a 40 mm tool diameter with internal coolant and compatibility with Taegutec 3PKT 1505 indexable inserts for reliable corner turning and reduced tool-change downtime; order directly via Metav Werkzeuge or consult the technical team for integration advice. Eckmesserkopf — Corner tool head, 40 mm with internal coolant (Teknik Makina) A compact Eckmesserkopf corner tool head for 3PKT 1505 indexable inserts, engineered for stable, repeatable turning where consistent edge performance and controlled cooling are required. 40 mm diameter tool head Internal coolant supply Compatible with Taegutec 3PKT 1505 inserts Four cutting edges, 90° cutting angle Stable cutting with integrated coolant for longer tool life The built-in internal coolant channel directs cutting fluid directly to the cutting zone to improve chip evacuation and thermal control. This reduces flank wear and helps maintain a consistent cutting edge under production loads, delivering measurable increases in service intervals and process stability. For workshops aiming to reduce unplanned stoppages, the coolant feed lessens heat-related tool degradation and supports tighter tolerances when machining with indexable inserts. Rigidity and geometry for accurate corner turning With a 40 mm diameter and a compact overall length of 40 mm, the tool head provides the stiffness required for precise corner operations. The geometry offers a 90° cutting angle and four cutting edges, which combine to reduce vibration and deliver a predictable cutting force direction. The result is improved surface finish and repeatability across batches, particularly beneficial in small-series production or high-mix environments where setup consistency is essential. Convenient insert clamping and fast maintenance Insert changes are secured with a Torx fastener (Torx T15) and a M4x10 screw, enabling quick, repeatable clamping without specialised tools. The configuration supports standard 3PKT 1505 indexable inserts from Taegutec, simplifying spare-part logistics. With a compact mass of 0.268 kg, the tool head minimises additional load on the toolholder while maintaining the mechanical stability required for fine turning and finishing passes. Broad workshop compatibility for efficient production Designed as a practical component for turning tool assemblies, the head fits seamlessly into standard setups and supports common indexable insert formats. The compatibility with Taegutec inserts and the clear mechanical specifications make it straightforward to integrate into existing tooling arrays, reducing inventory complexity and enabling faster job changeovers. This component is aimed at production shops and precision engineering workshops seeking to harmonise performance, availability and process reliability. Contact Metav Werkzeuge for ordering and integration guidance on the Teknik Makina Eckmesserkopf T397-1TM; technical consultants in Emmerich can advise on fitment and process optimisation — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T397-1TM Product type: Corner tool head (Eckmesserkopf) Manufacturer: Teknik Makina Compatible inserts: 3PKT 1505 Compatible insert manufacturer: Taegutec Internal coolant: yes Fastening: Torx T15 / M4x10 Facts Diameter: 40 mm Overall length: 40 mm Aufnahme diameter: 16 mm Cutting edges: 4 Cutting angle: 90° Weight: 0.268 kg eClass: 21181015 Special features Internal coolant channel Compatible with 3PKT 1505 indexable inserts Torx key size T15 Fastening screw M4x10 SKU: T397-1TM FAQ Is this head compatible with Taegutec 3PKT 1505 indexable inserts? Yes. The Eckmesserkopf T397-1TM is specified for 3PKT 1505 indexable inserts and is compatible with inserts from Taegutec, ensuring standardised fitment and reliable seating. What benefit does the internal coolant provide? The internal coolant in this corner tool head directs fluid to the cutting zone to improve chip control and heat dissipation, prolonging insert life and stabilising machining results under continuous production. How many cutting edges and what cutting angle does the tool head have? The tool head features four cutting edges and a 90° cutting angle, designed to provide stable corner performance and improved surface finish in turning applications. What fastening hardware is required for insert clamping? Insert clamping uses a Torx drive; the tool head requires a Torx T15 key and M4x10 screw for secure and repeatable insert retention. Which applications suit this corner tool head best? The component is suited to precision corner turning, finishing passes and general turning tasks where indexable inserts are preferred; it is designed for workshops and production environments that require quick insert changes and consistent machining results. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Tool Head 90° For ANKX 0706/1710 Indexable Inserts, M5x12 Torx T20 - Teknik Makina
Take advantage of a compact, rigid tool head that delivers precise 90° shoulder cuts and fast, secure insert changes; the combination of 16 mm shank stability and lightweight design supports repeatable results and reduced downtime. Order the component via Metav Werkzeuge or request clarification from our consultants. Eckmesserkopf T440TM — 90° indexable insert tool head by Teknik Makina, 16 mm shank The Eckmesserkopf T440TM is a 90° turning head designed for reliable shoulder and facing operations with standard indexable inserts and a compact 16 mm toolholder interface. 90° cutting angle for accurate shoulder cuts 16 mm shank diameter for compact toolholders Compatible with ISCAR indexable inserts Supplied with M5x12 Torx fixing screw Consistent accuracy and rigidity for shoulder machining The 90° geometry delivers a defined cutting orientation that is especially useful for shoulder turning and facing tasks where perpendicularity matters. By combining a 90° cutting angle with a 16 mm shank, the head offers improved stiffness compared with slimmer adaptors, which reduces chatter and improves surface finish. The 40 mm diameter and 45 mm overall length contribute to a stable cutting envelope while the modest mass of 0.279 kg keeps the assembly light enough for quick tool changes. These characteristics translate into fewer rejected parts and shorter cycle times on repetitive production runs. Quick, secure clamping and straightforward maintenance Fast insert retention is enabled by the supplied M5x12 Torx screw together with the T20 key specification, ensuring a positive clamp with predictable torque characteristics. The clear specification of the fixing hardware simplifies procurement and maintenance planning, and the head’s compatibility with ISCAR indexable inserts streamlines inventory since widely used insert families can be mounted without adapters. Reduced changeover time and a familiar clamping system enhance overall equipment effectiveness on the shop floor. Built for everyday workshop versatility The compact design suits a wide range of turning centres and tool posts where space is limited but performance is required. The head is intended for operations that demand clean shoulder faces and defined step features; its form factor enables use in tight set-ups and on smaller lathes. Because the component integrates common mechanical interfaces, it becomes an efficient option for job shops and production lines that favour interoperable tooling systems and minimal bespoke tooling. Productivity gains and cost-conscious tooling strategy By providing a repeatable 90° orientation and robust clamping in a lightweight package, the head helps to reduce rework and extend insert life through stable cutting conditions. Matching the head with standard ISCAR inserts allows purchasing teams to concentrate on fewer insert types, lowering complexity and storage costs. Combined with Metav’s reliable supply chain and technical advice from Emmerich, the T440TM supports a practical, productivity-focused tooling strategy that benefits both small workshops and industrial production environments. Discuss the Teknik Makina T440TM with Metav Werkzeuge in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm compatibility with existing toolholders and secure timely delivery Technical data Article number: T440TM Manufacturer: Teknik Makina SKU: T440TM Torx screw: M5x12 Torx key size: T20 Compatible insert manufacturer: ISCAR Facts Shank diameter: 16 mm Overall length: 45 mm Diameter: 40 mm Weight: 0.279 kg Cutting angle: 90° Number of cutting edges: 3 Special features Compatibility with ISCAR indexable inserts 90° geometry for shoulder and facing operations Supplied fixing screw M5x12 and Torx drive T20 FAQ Which insert systems fit this tool head? The head is compatible with ISCAR indexable insert systems; confirm specific insert family and seat type before ordering to ensure perfect fit. What is the shank diameter and how does it affect rigidity? The shank diameter is 16 mm; this provides higher stiffness than smaller adaptors and helps to reduce vibration during shoulder machining. What fixing screw and key size are included? Fixing hardware is specified as an M5x12 Torx screw; the corresponding Torx key size is T20. Is the head suitable for precision shoulder turning? Yes — the 90° cutting orientation is designed for shoulder and facing operations where perpendicularity and defined steps are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Tool Head 90° For LNGX 1307 Indexable Inserts, M4x10 Torx T15 - Teknik Makina
Benefit from a compact 90° indexable insert tool head that combines secure Torx M4x10 clamping, a standard 16 mm shank and compatibility with Walter LNGX 1307 inserts; this ensures stable turning operations and straightforward insert changes. Order the component directly via Metav Werkzeuge or contact the consultants for integration advice. Teknik Makina 90° Indexable Insert Tool Head (T488TM) — for Walter LNGX 1307 inserts, 16 mm shank A 90° indexable insert tool head (T488TM) designed for turning and profiling where precise corner machining and compatibility with Walter LNGX 1307 indexable inserts are required 90° cutting angle for precise corner turning Compatible with Walter LNGX 1307 inserts 16 mm shank for standard tool holders Torx M4x10 clamping with T15 key required Secure clamping and compact footprint for consistent results The holder features a 16 mm shank and a compact 45 mm overall length, delivering a stable connection to the tool post while keeping the working envelope small. Clamping is effected with an M4x10 Torx screw, tightened with a T15 key, which provides repeatable seat contact and reduces micro‑movement during cut engagement. At a mass of 0.304 kg, the assembly maintains low inertia, which can contribute to reduced chatter on light to medium‑duty lathes. The mechanical design focuses on rigidity and simple serviceability to support consistent machining cycles. Direct compatibility with Walter LNGX 1307 indexable inserts Designed specifically for Walter LNGX 1307 inserts, the head accepts the prescribed insert geometry and secures it for accurate edge location. This compatibility removes the need for adapter plates and simplifies inventory management when Walter inserts are already in use. The indexed insert format enables fast edge rotation or replacement, minimising downtime and preserving cycle‑time efficiency. For operations requiring a standardised insert form, the holder ensures correct seating and tool alignment within industry tolerances. 90° geometry for precise shoulder and face turning A true 90° cutting angle is particularly advantageous for producing square shoulders, external chamfers and precise face profiles without secondary referencing. The tool head’s 40 mm diameter and triple‑edge configuration support balanced cutting forces and an even load distribution across the insert seat. In practice, this geometry reduces the need for multiple passes on perpendicular features and can improve first‑pass dimensional conformity, especially where tight angular accuracy is required. Practical applications and maintenance guidance The component is suited to external turning, shoulder finishing and short‑reach profiling in general mechanical workshops and light industrial turning centres. Routine inspection focuses on the clamping screw torque and insert seating; the Torx interface and standard screw size simplify replacements and spare part logistics. For integration into existing workflows, Metav Werkzeuge can supply the tool head as a single item or advise on compatible tool holders and insert stocks to streamline procurement and reduce setup time. For personalised supply and technical advice on integrating the T488TM 90° indexable insert tool head into production, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Technical data SKU: T488TM Manufacturer: Teknik Makina Shank diameter: 16 mm Tool diameter: 40 mm Overall length: 45 mm Weight: 0.304 kg Cutting angle: 90° Compatible with Walter LNGX 1307 inserts Torx screw M4x10 Torx key T15 Three cutting edges Suitable for turning and shoulder finishing FAQ What inserts fit this tool head? The tool head accepts Walter LNGX 1307 indexable inserts; the seat geometry is matched to that insert type for accurate location and secure clamping. Which shank size is required for mounting? Mounting requires a 16 mm shank interface; the T488TM is designed for standard tool holders that accept a 16 mm shaft. How is the insert secured in the holder? Clamping is achieved with an M4x10 Torx screw; a T15 key is used for tightening to the recommended torque to ensure repeatable seating. Is the 90° angle suitable for shoulder machining? Yes, the 90° cutting angle is intended for precise shoulder and face turning, providing accurate right‑angle profiles with minimal secondary operations. Can the head be used with non‑Walter inserts? The T488TM is specified for Walter LNGX 1307 inserts; alternative insert types require verification of seat geometry and secure clamping compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Tool Head 90° For LNMX 1006 Indexable Inserts, M3x7 Torx Screw T8 - Teknik Makina
Take advantage of a compact, high‑precision toolholder that combines a 90° cutting angle with secure Torx fastening for consistent shoulder milling. Benefit from proven compatibility with LNMX 1006 indexable inserts and the reliable supply chain of Metav Werkzeuge for rapid delivery and expert advice. Corner milling head by Teknik Makina — 90° indexable head, Ø40 mm A corner milling head designed for square shoulder and face milling using LNMX 1006 indexable inserts, combining compact dimensions with robust fastening for production environments 90° cutting angle for square shoulder milling Compatible with LNMX 1006 indexable inserts Ø 40 mm head with five cutting edges 16 mm shank; Torx M3x7 screw, T8 key Precision seating and predictable machining results The compact milling head delivers precision by securing the insert in a repeatable seat that reduces run‑out and positional variation. With a defined 90° cutting geometry and a head diameter of Ø40 mm, the design supports accurate shoulder and corner cuts where dimensional conformity is critical. The use of indexable plates keeps maintenance straightforward: worn inserts are replaced, not the entire tool, which helps preserve shaft alignment and machine setup times. Simple, secure clamping for fast tool changes Fastening is achieved with a Torx screw (M3x7) operated with a T8 key, ensuring a secure clamp without complex procedures. The head accepts LNMX 1006 plates (Korloy‑compatible), a widely used insert format that allows rapid changeover and consistent cutting performance. For workshops unfamiliar with indexable systems, an indexable head holds replaceable carbide plates at a fixed angle so the cutting edge is restored instantly when an insert is rotated or replaced. Robust geometry for stable cutting and repeatability Equipped with five cutting edges across the head, the toolholder focuses on balanced engagement and stable chip removal under intermittent loads. The combination of a 90° approach and the head’s dimensions is optimised for repeatable results in series production, helping to reduce scrap rates and rework. The 16 mm shank delivers a compact footprint that supports rigid mounting while keeping the overall tool projection modest, which reduces deflection during heavier passes. Integration into the workshop and supply reliability The toolholder’s compact overall length and clear mechanical data simplify tool setup and inventory management in a production shop. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component benefits from a central European quality filter and dependable logistics. For procurement and planning, the clear compatibility with LNMX 1006 inserts and Korloy plates allows standardised stocking of inserts and fastening consumables, keeping toolrooms efficient and predictable. For Teknik Makina products such as this 90° corner milling head, contact Metav Werkzeuge for specific availability, delivery options and tailored recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T386TM Manufacturer: Teknik Makina For inserts: LNMX 1006 indexable inserts (Korloy compatible) Manufacturer SKU: T386TM Facts Shank diameter: 16 mm Head diameter: 40 mm Overall length: 40 mm Weight: 0.258 kg Cutting angle: 90° Number of cutting edges: 5 Special features Torx screw M3x7 Torx key size T8 Compatible with Korloy LNMX 1006 inserts FAQ Which insert type fits this head? The head accepts LNMX 1006 indexable inserts; Korloy plates have been specified as compatible. What is the shank diameter of the toolholder? The shank diameter is 16 mm, matching the recorded uptake dimension for compact mounting. Which fastening hardware is required? Fastening uses an M3x7 Torx screw tightened with a T8 key for secure insert clamping. What cutting angle does the head provide? The toolholder provides a 90° cutting angle, suited to square shoulder and corner milling operations. How many cutting edges are present on the head? The head has five cutting edges designed into the assembly for balanced engagement. What is the SKU and who supplies the tool? The SKU is T386TM; the head is produced by Teknik Makina and supplied via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Tool Head ADMT 1606 For Indexable Inserts L45mm Internal Coolant - Teknik Makina
Take advantage of compact design and coolant-through performance for steady turning cycles; the internal coolant and compatibility with ADMT 1606 indexable inserts reduce tool change time and improve process reliability. Order directly via Metav Werkzeuge or contact our consultants for application advice. Corner tool head for ADMT 1606 indexable inserts — 40 mm diameter, internal coolant (Teknik Makina) The Corner tool head is a compact turning tool head for ADMT 1606 indexable inserts, engineered for coolant-through operation and constrained-space machining with a 45 mm overall length Compact 40 mm diameter for tight operations Internal coolant for improved tool life Compatible with ADMT 1606 indexable inserts Four cutting edges for extended service Precision and compatibility for accurate turning The modular design delivers a consistent clamping interface for ADMT 1606 indexable inserts, enabling quick insert changes and repeatable positioning. With a 40 mm diameter and a 45 mm overall length the holder is suited to restricted setups where rigid support is essential. The combination of compact dimensions and standard insert geometry shortens set-up time and reduces the number of toolholders required in a small-to-medium sized workshop, improving process efficiency and machine uptime. Coolant-through design that stabilises cutting conditions Equipped with internal coolant, the holder channels cutting fluid directly to the insert seat to lower temperatures and assist chip control, which is particularly beneficial on continuous turning operations. The secure fastenings use a Torx T15 drive and an M4x10 Torx screw to ensure steady clamping of the insert, reducing the risk of micro-movements under load. This setup supports longer tool life and more consistent surface finishes by maintaining a stable cutting zone and effective heat management. Workshop-ready handling and proven build quality Manufactured by Teknik Makina, the tool head combines lightweight handling (approx. 0.258 kg) with robust construction for everyday use on production lathes. The four cutting edges extend service intervals, while compatibility with insert supplier Walter ensures broad availability of cutting grades and geometries. The result is a versatile, maintenance-friendly tool holder that lowers inventory complexity and helps maintain a steady throughput in industrial and jobbing environments. Discuss the Teknik Makina corner tool head (SKU T351-1TM) with Metav Werkzeuge for tailored recommendations and fast supply from Emmerich; our specialists will help match the holder to the right ADMT 1606 insert and machining task. Technical data SKU: T351-1TM Manufacturer: Teknik Makina Product type: Corner tool head ECLASS: 21181015 Facts Diameter: 40 mm Overall length: 45 mm Weight: 0.258 kg Cutting edges: 4 Cutting angle: 90° Features Internal coolant: yes Compatible inserts: ADMT 1606 Compatible insert manufacturer: Walter Torx key: T15 Torx screw: M4x10 Label: 40mm Eckmesserkopf ADMT 1606 L45mm mit Innenkühlung FAQ Is this holder compatible with ADMT 1606 inserts? Yes. The Teknik Makina corner tool head (SKU T351-1TM) is designed specifically for ADMT 1606 indexable inserts and provides the correct seating and clamping geometry for secure use. Does the tool head provide internal coolant? Yes. Internal coolant is integrated into the holder to deliver coolant directly to the cutting edge, improving thermal control and chip evacuation during turning operations. What fastening method is used to secure the insert? The insert is secured with a Torx screw; the holder uses a Torx T15 drive and an M4x10 screw for reliable clamping. How many cutting edges are available per insert position? The tool head accepts inserts in a configuration that provides four cutting edges, extending service life before a re-index is required. Is the holder suitable for machine shops with limited overhang? Yes. With a compact 40 mm diameter and 45 mm overall length the corner tool head is optimised for confined setups and restricted overhangs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Tool Head APMT 1604 Indexable Inserts Internal Coolant, 90° - Teknik Makina
Take advantage of the combination of a compact 40 mm cutter diameter, internal coolant and a robust 90° cutting geometry to ensure predictable cycle times and controlled chip flow; order the tool directly via Metav Werkzeuge or consult our team for specification advice. T241-1TM corner milling head — 40 mm indexable milling head with internal coolant for APMT 1604 by Teknik Makina T241-1TM corner milling head is designed for precision square-shoulder milling and profiling in CNC operations where reliable chip evacuation and quick insert changes are essential 40 mm cutter diameter with 90° cutting angle Internal coolant for improved chip evacuation Compatible with APMT 1604 inserts (Korloy) Torx T15 screw M4x10, 4 cutting edges Consistent production through designed geometry and coolant The compact tool body combines a 40 mm cutter diameter with a 90° cutting angle to deliver stable engagement and repeatable results on shoulder and profile passes. The short 45 mm overall length reduces overhang and helps maintain rigidity in medium-duty milling operations, which stabilises cutting forces and supports longer insert life. With a balanced mass of 0.258 kg, the head contributes to reduced vibration and consistent surface finish, while the geometry supports predictable toolpaths that enhance cycle-time reliability. Faster operations and less downtime through coolant-fed inserts Built-in internal coolant supplies cutting fluid directly to the cutting zone, improving chip breaking and evacuation at the tool edge. This feature is particularly significant when using APMT 1604 indexable inserts, enabling stable cutting at higher feed rates and cleaner chip control. The secure clamping system uses a Torx T15 key and M4x10 screw to fix inserts reliably; this permits rapid insert replacement and lowers maintenance intervals, thereby increasing machine uptime and reducing process interruptions. Versatility for confined and precise machining tasks As an indexable milling head, the component suits operations that require square-shoulder cutting and accurate profiling while keeping tool inventory minimal. The compatibility with Korloy inserts expands available grades and geometries for finishing or light roughing, allowing the tool to be adapted to different material demands without changing the tool body. The compact dimensions make the head appropriate for setups with limited clearance, enabling access to tight pockets and stepped shoulders while preserving stiffness. Practical handling and workshop integration The head’s straightforward interface and common fastener standard simplify procurement and servicing in busy shops. The T241-1TM designation aids ordering and stock management, while the indexable insert format supports cost-efficient reconditioning of cutting edges rather than whole-tool replacement. Together with Metav’s distribution from Emmerich, customers benefit from reliable supply and clear specification support, ensuring the head integrates smoothly into existing production toolsets. Contact Metav Werkzeuge to specify the Teknik Makina T241-1TM corner milling head with internal coolant for streamlined machining and dependable deliveries from Emmerich Technical Data SKU: T241-1TM Product type: Corner milling head Manufacturer: Teknik Makina ECLASS: 21181015 Facts Cutter diameter: 40 mm Overall length: 45 mm Weight: 0.258 kg Cutting edges: 4 Cutting angle: 90° Compatibility & features Internal coolant: Yes Indexable inserts: APMT 1604 Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this milling head? This milling head accepts APMT 1604 indexable inserts; Korloy grades are listed as compatible and offer a broad range of chipbreakers and coatings suitable for different finishes. Is internal coolant supplied through the tool body? Yes, the head is equipped with internal coolant, which directs cutting fluid to the insert edge to aid chip control and surface quality during milling. What is the overall length and how does it affect rigidity? The head has a compact overall length of 45 mm, reducing overhang and improving rigidity compared with longer tool assemblies, which contributes to steadier cuts and better finish. Which fastening standard secures the inserts? Inserts are secured with a Torx T15 drive and M4x10 screw, facilitating secure clamping and straightforward replacement using common workshop tools. How heavy is the tool and what does that mean for handling? At 0.258 kg, the head is lightweight yet sufficiently robust for stable operation, simplifying handling during tool changes and stocking while maintaining cutting stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Tool Head For 3PKT 1505 Indexable Inserts, 90° Cutting Angle - Teknik Makina
Benefit from the combination of a 90° cutting geometry, compact 40 mm diameter and fast, secure insert clamping for consistent corner turning performance. Order the Corner Tool Head T397TM directly via Metav Werkzeuge or ask our consultants if needed. Corner Tool Head T397TM — 40 mm diameter, for 3PKT 1505 indexable inserts (Teknik Makina) The Corner Tool Head is designed for precise external and face turning tasks, accepting 3PKT 1505 indexable inserts for efficient cornering and profiling in general machining operations. Compact 40 mm diameter tool head Compatible with 3PKT 1505 indexable inserts 90° cutting geometry for accurate corner turning Stable geometry for repeatable corner turning The tool head’s 90° cutting angle and compact 40 mm diameter are engineered to deliver consistent part geometry when performing corner and shoulder operations. A solid 16 mm shank and a mass of 0.268 kg contribute to reduced vibration and improved surface finish; this translates into fewer rejects and less rework in batch production. The rigid configuration stabilises the cutting zone, enabling predictable tool life and steady dimensional results even on interrupted cuts. Fast insert changes and secure clamping for productive setups Designed for use with 3PKT 1505 indexable inserts (compatible with Taegutec), the head accepts inserts that can be indexed quickly to restore a fresh cutting edge without losing setup accuracy. Clamping is achieved via an M4x10 Torx screw, driven with a Torx T15 key, which simplifies maintenance and reduces downtime compared with welded or brazed tooling. Indexable inserts lower per-edge costs and make reconditioning straightforward, so tool costs are distributed over multiple edges rather than a single component. Practical benefits in workshop and small-series production The compact overall length of 40 mm and the modest weight make the head suitable for confined toolpost spaces and quick toolchanger setups. With four cutting edges indicated, the configuration supports repeated indexing cycles before replacement is necessary, improving cost-efficiency on short to medium production runs. The straightforward mechanical design keeps maintenance work minimal while preserving machining accuracy, which is particularly beneficial for workshops seeking dependable tooling without complex upkeep. Contact Metav Werkzeuge today to confirm compatibility, request delivery details and secure Corner Tool Head T397TM units from our Emmerich supply for immediate integration into production. Technical data Article number: T397TM Designation: Corner tool head For indexable inserts: 3PKT 1505 (Taegutec) Facts Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Weight: 0.268 kg Cutting angle: 90° Number of cutting edges: 4 Torx key: T15 Torx screw: M4x10 Special features Compatibility: Taegutec 3PKT 1505 inserts Compact design for confined toolpost spaces Secure Torx clamping for fast insert replacement FAQ Which inserts fit this tool head? The Corner Tool Head T397TM is specified for 3PKT 1505 indexable inserts, with compatibility tested for Taegutec insert grades. What drive and screw are required for clamping? Clamping uses an M4x10 Torx screw tightened with a Torx T15 key for secure and repeatable insert fixation. Is the head suitable for heavy roughing cuts? The compact 40 mm diameter and rigid 16 mm shank provide stability for many turning tasks; for heavy roughing, assessment of machine power and cutting parameters is recommended to match the intended application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Tool Head for ADKT 1706 Indexable Inserts Internal Coolant, 4 Cutting Edges, 90° - Teknik Makina
Take advantage of a compact, 90° turning solution with internal coolant and a precise 40 mm tool interface for reliable corner machining — built for ADKT 1706 indexable inserts. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Corner tool head for ADKT 1706 indexable inserts — 40 mm diameter, internal coolant The Corner tool head is designed for accurate 90° turning and corner operations using ADKT 1706 indexable inserts, offering internal coolant for improved tool life and chip control. 40 mm diameter for compact setups Integrated internal coolant for chip evacuation Compatible with Korloy ADKT 1706 inserts Four indexable cutting positions for longer runtime Torx T15 screw, M4x10 fastening Consistent 90° turning for repeatable part quality Designed for right‑angled turning tasks, this head delivers precise 90° geometry and stable tool positioning to support consistent batch production. The built‑in internal coolant supplies cutting fluid directly to the cutting edge, reducing thermal distortion and improving insert life; this means fewer interruptions for tool changes and steadier tolerances across runs. The compact 40 mm footprint allows use in confined toolposts without compromising rigidity. Faster changeover and dependable clamping to reduce downtime Maintenance and insert changes are simplified by the standardised Torx T15 drive and the M4x10 clamping screw, enabling quick, reproducible clamping actions. With four indexable faces, the head offers multiple reuse positions per insert, translating into longer intervals between tool replacements. The robust clamping arrangement and precise screw interface reduce the risk of seating errors, supporting higher machine uptime and predictable process behaviour. Broad workshop compatibility and clearer process control Engineered to accept Korloy ADKT 1706 indexable inserts, the head integrates seamlessly into common turning tool chains and is suited for a range of finishing and light‑turning operations. The combination of compact dimensions and internal coolant ensures effective chip control and coolant delivery even on small lathes and live‑tool setups. Clear, measurable properties and a familiar fastener system make process documentation and operator training straightforward. Choose Teknik Makina engineering for dependable corner machining and contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T589TM Eclass: 21181015 Product type: Corner tool head Facts Diameter: 40 mm Overall length: 40 mm Weight: 0.248 kg Cutting edges: 4 Cutting angle: 90° Internal coolant: yes Torx key: T15 Clamping screw: M4x10 Special features Compatible with ADKT 1706 indexable inserts Suited for Korloy insert manufacturer Compact design for confined toolposts Designed for repeatable, high‑uptime operation FAQ What inserts are compatible with this tool head? The corner tool head accepts ADKT 1706 indexable inserts, specifically those from Korloy as stated in the product data. Is there coolant supply integrated in the head? Yes, the head incorporates internal coolant, which delivers cutting fluid directly to the cutting zone for improved insert life and chip control. How many usable cutting positions does the head provide? The design provides four indexable cutting positions, allowing multiple rotations of the insert before replacement. Which fastener is required for insert clamping? Insert clamping is achieved with an M4x10 screw tightened using a Torx T15 driver for reliable, repeatable seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com