Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
80mm Face Milling Head for PNHX 1105 Indexable Inserts L50mm With Internal Coolant, 8 Inserts, T15/M4x10 Torx - Teknik Makina
Take advantage of an efficient combination of a wide 80 mm cutting diameter and internal coolant to boost cycle times and reduce tool changes; request a quote or technical advice from Metav Werkzeuge to integrate this cutter into existing workflows. Face milling head for PNHX 1105 indexable inserts – 80 mm with internal coolant (Teknik Makina) The Face milling head for PNHX 1105 indexable inserts is a robust solution for high-volume face milling in general machining, designed to accept Palbit PNHX 1105 inserts for reliable material removal. 80 mm diameter for broad face milling Internal coolant for improved tool life 8 cutting edges for high material removal Compatible with PNHX 1105 Palbit inserts Faster metal removal with fewer interruptions The milling head combines an 80 mm tool body with 8 cutting edges, allowing larger engagement per revolution and therefore a measurable increase in material removal rate. This configuration reduces the number of tool changes required on the shop floor, shortening cycle times and improving per-shift throughput. The design supports stable cutting even at heavier radial depths, which benefits both batch production and single-part manufacture by delivering consistent surface finish and dimensional conformity. Directed cooling and secure clamping to extend service life Integrated internal coolant channels deliver lubricant and coolant precisely to the cutting zone, lowering temperatures and flushing chips away from the insert pockets. This targeted cooling reduces flank wear and extends insert life, translating into lower tooling costs over time. Fastening is executed with a M4x10 Torx screw tightened using a T15 key, providing a reliable clamp that resists vibration and ensures repeatable seat contact after index changes. Exact fit for PNHX 1105 inserts and stable cutting geometry Compatibility with PNHX 1105 indexable inserts and Palbit standards ensures rapid tooling swaps and broad availability of grades for steel, stainless steel and cast materials. The cutter’s maximum effective cutting diameter of 89 mm and a cutting angle of 60° produce an advantageous balance between cutting force and chip formation, helping to maintain tool life while achieving the desired surface quality. The overall length of L50 mm supports compact setups and reduces overhang, which aids stiffness and positional accuracy. Practical advantages for production and workshop environments The combination of a compact tool body, standardised Torx clamping and clear compatibility with established insert systems makes this milling head straightforward to adopt in existing tool chains. With a service weight of 1.224 kg, the tool delivers mass for dampening without excessive inertia, improving stability in interrupted cuts. The construction favours scheduled maintenance cycles and predictable consumable use, making it a cost-efficient choice where uptime and supply reliability are priorities. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools face milling head into production and to secure dependable supply directly from Emmerich. Technical data SKU: T678TM Product type: Face milling head Label: 80mm Planmesserkopf PNHX 1105 L50mm mit Innenkühlung Brand: Teknik Makina Numbers / Core technical data Diameter: 80 mm Max cutting diameter: 89 mm Overall length: 50 mm Weight: 1.224 kg Cutting edges: 8 Cutting angle: 60° Designs / Special features Internal coolant For PNHX 1105 indexable inserts Compatible with Palbit inserts Fastening: Torx screw M4x10 Torx key: T15 FAQ What inserts does the milling head accept? The milling head is designed for PNHX 1105 indexable inserts and is specified for compatibility with Palbit insert geometries and grades. Is the tool suitable for heavy roughing? Yes, the combination of 8 cutting edges and the robust tool body supports higher material removal rates suitable for roughing operations in many production contexts. How does the internal coolant improve performance? Internal coolant channels deliver fluid directly to the cutting zone, reducing temperatures and chip accumulation, which in turn extends insert life and stabilises cutting conditions for the face milling head. What fastening system secures the inserts? Inserts are secured with a Torx screw M4x10 using a T15 key, providing repeatable clamping force and resistance to vibrational loosening. Can this tool be used for stainless steel or cast iron? Yes, the cutter’s geometry and the availability of appropriate PNHX 1105 insert grades make it adaptable for stainless steels and cast iron when the correct insert grade is selected. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head for SDHT 1204 Indexable Inserts 45° Cutting Angle, M4.5x11 Torx - Teknik Makina
Take advantage of a compact tool body with a 80 mm head and 94 mm maximum cutting diameter for efficient face work; the robust fastening using an M4.5x11 Torx screw (T15) and the six cutting edges ensure stable chip removal and predictable tool life. Order the planing cutter head directly via Metav Werkzeuge or ask our consultants if needed. Planing cutter head T302TM — 80 mm diameter, for SDHT 1204 indexable inserts (Teknik Makina) The Planing cutter head T302TM is a compact face machining head designed for precise planing and finishing operations with SDHT 1204 indexable inserts For SDHT 1204 indexable inserts 80 mm head diameter for compact setups Six cutting edges for even material removal Faster face machining with reliable geometry The 80 mm head and six cutting edges deliver a balanced cut that reduces vibration and improves surface finish. By distributing the cutting load across multiple edges, the tool achieves consistent chip evacuation and lower cutting forces, which translates into longer insert life and fewer machine interruptions. The head’s 45° cutting angle is optimised for a compromise between shear and plunging action, making it suitable for both light finishing and moderate stock removal. Easy maintenance and secure clamping for workshop efficiency Fast and secure clamping is provided by the M4.5x11 Torx screw (requires a T15 key), allowing quick insert changes and minimal downtime. The straightforward fastening avoids complex setup procedures and supports reproducible positioning of the indexable inserts. With a 27 mm mounting bore and a compact overall length of 52 mm, the unit fits into many standard toolholders, simplifying tool management in mixed-production environments. Clear compatibility for predictable procurement Engineered specifically for SDHT 1204 indexable inserts, the tool body eliminates ambiguity when specifying replacement parts and reduces the risk of mismatched components. The construction is optimised for a maximum cutting diameter of 94 mm, so set-up parameters can be planned in advance and cutting data tables adjusted accordingly. The compact mass of 1.2 kg helps maintain spindle balance and contributes to repeatable machining results. Practical benefits for shop floors and OEM workshops The compact design and compatibility reduce the number of specialised holders required in a tool crib, helping to centralise tooling choices and improve reorder clarity. The robust tool geometry and standardised screw interface also facilitate safer handling and predictable service intervals. For applications ranging from light finishing to medium-duty planing, the head offers a practical combination of performance and simplicity that supports steady production throughput. For procurement or technical clarification on the Teknik Makina planing cutter head, contact Metav Werkzeuge for direct supply and tailored advice — Metav Werkzeuge ensures reliable delivery from Emmerich and expert guidance for workshop integration Technical Data Article number: T302TM Product: Planing cutter head for SDHT 1204 indexable inserts Brand: Teknik Makina eClass: 21181015 Facts Head diameter: 80 mm Max cutting diameter: 94 mm Shank / mounting bore: 27 mm Number of cutting edges: 6 Cutting angle: 45° Overall length: 52 mm Weight: 1.2 kg Special features Compatible with SDHT 1204 indexable inserts Fastening: M4.5x11 Torx screw Torx key size: T15 SKU: T302TM FAQ What inserts fit this cutter head? The head is designed for SDHT 1204 indexable inserts; the T302TM accepts these inserts for reliable seating and repeatable cutting performance. What is the maximum cutting diameter for this tool? The maximum cutting diameter is 94 mm, which should be considered when planning engagement and toolpath strategies. Which fastening is used to secure the inserts? Inserts are clamped with an M4.5x11 Torx screw; a T15 key is required for tightening and replacement operations. Is the tool suitable for finishing operations? Yes, the combination of a 45° cutting angle and six cutting edges provides a stable cut suitable for finishing and moderate stock removal. How should the T302TM be specified when ordering? Order using the article number T302TM and specify compatibility with SDHT 1204 inserts to ensure correct delivery. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head for SDHT 1204 Indexable Inserts L52mm With Internal Cooling - Teknik Makina
Take advantage of a compact 80 mm diameter head with internal coolant and six indexable cutting edges for reliable face milling performance; order the face milling head directly via Metav Werkzeuge for fast supply or consult the technical team for application advice. Face milling head T302-1TM — 80 mm, internal coolant (Teknik Makina) Face milling head T302-1TM designed for high-feed finishing with SDHT 1204 indexable inserts, offering stable coolant delivery and precise mounting for workshop and production use 80 mm diameter for compact machining Integrated internal coolant delivery Compatible with SDHT 1204 inserts Six indexable cutting edges for continuity 45° cutting angle for smooth chip flow Consistent surface quality through optimised chip control The compact milling head delivers predictable results by combining an 80 mm diameter body with a 45° cutting angle, which together promote smooth chip formation and reduced vibration. Internal coolant channels keep the cutting zone clear and cool, improving tool life and surface finish. For operations where repeatability matters, the combination of balanced geometry and directed coolant helps maintain tolerances and reduces secondary finishing work. The robust design supports steady cutting conditions across batch runs and short production cycles. Reduced setup time and reliable clamping for shop-floor efficiency The head features a precise mounting interface and uses Torx T15 screws (M4.5x11) for secure attachment, simplifying repeat setups and lowering the risk of misalignment. The configuration with six inserts allows interrupted cuts to continue with minimal variation, meaning fewer tool changes and less downtime. The overall length of 52 mm and a weight of 1.214 kg give a compact, stable tool that is easier to handle during tool changes, which benefits both small workshops and industrial machining cells by making fixture and handling routines more efficient. Fast insert replacement and compatibility with standard indexables Designed specifically for SDHT 1204 indexable inserts, the milling head supports rapid insert changes to keep machines productive. The modular insert system means stock can be standardised across multiple tools, simplifying logistics and reducing inventory complexity. The T302-1TM head’s six cutting positions provide a continuous cutting profile and allow quick restoration of cutting geometry without extensive regrinding, which is advantageous for shops aiming to maximise cutter utilisation and minimise non-productive time. Application scope and material handling advantages This face milling solution is suitable for a broad range of finishing tasks where controlled chip evacuation and consistent edge engagement are required. The directed coolant and stable cutter geometry make it suitable for common workshop materials and finishing passes where surface integrity is critical. With its compact form factor and compatibility with industry-standard inserts, the head supports flexible use across milling centres and horizontal machines, while providing the precision expected from dedicated milling assemblies. Contact Metav Werkzeuge for tailored advice and to secure the Teknik Cutting Tools face milling head T302-1TM with internal coolant; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: T302-1TM Product type: Face milling head Article name: Face milling head for SDHT 1204 indexable inserts Brand: Teknik Makina Facts Diameter: 80 mm Maximum cutting diameter: 94 mm Overall length: 52 mm Weight: 1.214 kg Number of cutting edges: 6 Cutting angle: 45° Screw: M4.5x11 Torx key: T15 Special features Internal coolant Compatible with SDHT 1204 indexable inserts Six indexable cutting positions Compact, workshop-friendly design FAQ Which inserts fit this milling head? The face milling head accepts SDHT 1204 indexable inserts; the T302-1TM is configured specifically for that insert geometry and seating. Is the tool suitable for finishing passes on steel? Yes, the head’s geometry and internal coolant support finishing on typical steels when paired with appropriate SDHT 1204 insert grades. What fastening hardware is supplied with the head? Fastening uses M4.5x11 Torx screws with Torx T15 drive; the T302-1TM is designed for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head for SEET 12T3 Indexable Inserts 45° Cutting Angle, Internal Coolant - Teknik Makina
Take advantage of a compact, robust facing solution that combines an 80 mm cutting diameter, internal coolant and six indexable cutting edges for stable, efficient facing operations; order the tool through Metav Werkzeuge or consult our specialists for application advice. Facing head for SEET 12T3 Indexable Inserts — 80 mm diameter, internal coolant (Teknik Makina) The Facing head for SEET 12T3 indexable inserts is a compact face-milling solution designed for precision facing and light planning tasks on CNC lathes and milling centres. 80 mm diameter cutting head Internal coolant supply Six indexable cutting edges 45° cutting angle for efficient cutting High material removal with predictable precision This compact cutter combines an 80 mm diameter with a 45° cutting angle and six indexable cutting edges, delivering a balance between material removal rate and surface finish. Compatibility with SEET 12T3 indexable inserts means quick edge changes and consistent geometry without complex setup. The head’s geometry reduces cutting forces through the inclined approach, which helps maintain machine stability and lowers vibration—factors that contribute to repeatable results and less rework on the shopfloor. Integrated coolant for longer tool life and cleaner chips An internal coolant channel directs fluid to the cutting zone, improving heat control and chip evacuation during facing operations. This targeted cooling reduces thermal load on the cutting edge and supports longer tool life for the inserts. The secure fixing of the inserts uses M3.5x8.5 screws tightened with a Torx T15 key, ensuring a reliable mechanical connection and simplified maintenance when insert changes are required. Compact dimensions for versatile machine integration With a 52 mm overall length and a mass of 1.305 kg, the head provides a compact footprint without sacrificing rigidity. The reduced overhang assists in minimising chatter and enables use in tighter setups where longer tooling would be impractical. The compact design also supports faster tool index changes, helping to reduce cycle-time losses during multi-operation sequences. Practical choice for production and small-batch work The head is tailored for repetitive facing tasks where fast insert indexing and straightforward serviceability are priorities. The combination of the SEET 12T3 system and indexed cutting edges allows economical use of each insert, while the coolant capability supports consistent cutting conditions across batches. This makes the tool suitable for both small-batch shops and production lines seeking predictable process windows. For precise, reliable facing operations select the Teknik Cutting Tools facing head (SKU T436-1TM) and contact Metav Werkzeuge in Emmerich for ordering details and application guidance — info@metav-werkzeuge.com, +49 2822 7131930. Technical data SKU: T436-1TM Label: 80mm facing head SEET 12T3 L52mm Product type: Facing head Compatible inserts: SEET 12T3 Internal coolant: yes Core data Diameter: 80 mm Overall length: 52 mm Weight: 1.305 kg Cutting edges: 6 Cutting angle: 45° Special features Torx key: T15 Torx screw: M3.5x8.5 Compact design for tight setups Indexable insert system for fast changes FAQ Which inserts are compatible with this facing head? The facing head is compatible with SEET 12T3 indexable inserts; this insert family provides straightforward indexing and consistent cutting geometry for facing applications. Does the tool support through-tool cooling? Yes, the head features internal coolant to deliver lubricant directly to the cutting zone, improving chip control and thermal management during machining. What fasteners are required for insert clamping? Inserts are secured with M3.5x8.5 screws tightened using a Torx T15 key, ensuring a secure and serviceable connection. Is this facing head suitable for compact machine setups? With a 52 mm overall length and a mass of 1.305 kg, the head is designed for compact integration where rigidity and minimal overhang are important for stable machining results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head For SEET 12T3 Indexable Inserts L50mm, 6 Cutting Edges, Internal Coolant - Teknik Makina
Take advantage of the combination of precise insert compatibility, internal coolant for improved chip control and a compact 80 mm diameter for efficient face milling. Order the assembly directly via Metav Werkzeuge or consult the Metav team for integration advice. Face milling head T564-1TM – 80 mm diameter, internal coolant (Teknik Makina) The Face milling head for SEET 12T3 indexable inserts is a compact cutting solution designed for productive face milling and finishing tasks in general workshop and light industrial applications. 80 mm diameter for broad material engagement Internal coolant supply for improved chip evacuation Compatible with SEET 12T3 indexable inserts Robust construction with six cutting edges Faster material removal with fewer tool changes The cutter head is engineered to deliver a consistently high metal removal rate: the 80 mm diameter combined with a 45° cutting angle allows an efficient engagement that balances cutting force and surface finish. The presence of six cutting edges means more cumulative cutting length per tool body, reducing changeover frequency and keeping the machining process productive. Indexable inserts are used instead of brazed cutters, so worn edges are replaced quickly; this reduces downtime and simplifies spare-part management. Cooler cutting zone and easier chip control Equipped with internal coolant, the assembly channels coolant directly to the cutting edges to lower tool temperature and assist in chip evacuation. This design reduces thermal wear on the inserts and helps maintain consistent edge life across production batches. The coolant feature, paired with the head’s rigid build and a mass of 1.206 kg, supports stable cutting conditions; the result is improved workpiece quality and fewer reworks over time. The Torx fastenings (Torx key T15, screws M3.5x11) permit straightforward insert clamping and secure fixation. Simple integration and broad compatibility for workshop use Compatibility with SEET 12T3 indexable inserts makes the head versatile across various materials and applications; customers can select grades and geometries to suit aluminium, steel or other workpieces. The overall length of 50 mm keeps the tool compact for machines with limited tool overhang, aiding rigidity and repeatability. The product is supplied under SKU T564-1TM, enabling clear procurement and stock management. For users less familiar with indexable tooling, inserts are replaceable tips that carry the cutting edge, allowing quick maintenance without regrinding. For reliable face milling performance from Teknik Makina, contact Metav Werkzeuge in Emmerich for tailored application advice and fast, dependable supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability. Technical data SKU: T564-1TM Product type: Face milling head For indexable inserts: SEET 12T3 Manufacturer: Teknik Makina Dimensions & weight Diameter: 80 mm Overall length: 50 mm Weight: 1.206 kg Number of cutting edges: 6 Cutting angle: 45° Features & compatibility Internal coolant Torx key: T15 Torx screw: M3.5x11 Eclass: 21181015 Label: 80mm Planmesserkopf SEET 12T3 L50mm FAQ Which inserts are compatible with this milling head? The head is designed for SEET 12T3 indexable inserts; insert choice (grade, geometry) determines suitability for specific materials and finish requirements. Is the coolant delivered directly to the cutting edge? Yes, the internal coolant channel supplies fluid directly to the cutting zone to reduce temperature and aid chip evacuation, improving insert life. How many cutting edges are available before replacement? The assembly holds six cutting edges in total; insert replacement frequency depends on material, feed and speed but the head permits rapid tip changes. What tools are required for insert changes? Torx fastening is used: a T15 Torx key is required and the fixing screws are M3.5x11. Can this head be used on machines with limited overhang? With an overall length of 50 mm the head is compact and suitable for installations where tool overhang must be kept short to preserve rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head For SNEU 1206 Indexable Inserts L50mm With Internal Coolant, 45° Cut Angle - Teknik Makina
Take advantage of the combination of robust material removal, precise coolant delivery and wide insert compatibility for reliable face-milling operations; order directly via Metav Werkzeuge or contact our consultants for application advice. Face-milling head T166-1TM – 80 mm diameter, internal coolant (Teknik Makina) The Face-milling head T166-1TM is a compact, high-capacity cutter designed for face milling with SNEU 1206 indexable inserts, optimised for both workshop and industrial CNC use. 80 mm diameter for broad material engagement Integrated internal coolant for improved chip control Compatible with SNEU 1206 Walter indexable inserts Seven cutting edges for efficient material removal Consistent productivity through optimised cutting geometry The head’s 80 mm diameter and 45° cutting angle deliver a balance of axial engagement and surface finish, allowing stable passes on flat surfaces while controlling radial forces. The seven cutting edges reduce the frequency of tool changes, increasing uptime in batch and continuous production. For machines where consistent material removal rate is critical, this design contributes to a predictable cycle time and fewer interruptions during the machining process. Longer insert life and cleaner chips with internal coolant Direct coolant supply to the cutting zone keeps temperatures down and improves chip evacuation, which helps protect insert edges and maintain dimensional stability. The integrated internal coolant system channels fluid precisely to the cutter tips, supporting higher metal-removal rates without compromising tool life. Compatibility with SNEU 1206 inserts ensures a broad selection of grades and geometries; the option to use Walter-approved inserts widens the choice for application-specific coatings and substrates. Secure mounting and service-friendly maintenance for workshop use Fastening is achieved with M5x12 Torx screws tightened with a T20 key, providing reliable clamping with straightforward maintenance procedures. The head’s overall length 50 mm and mass of 1.252 kg contribute to a compact, well-supported setup that reduces vibration on medium-duty spindles. Clear mechanical interfaces and standard screw formats simplify reassembly and balancing after insert changes, making this head suitable for routine shop workflows and industrial CNC environments. Contact Metav Werkzeuge today for tailored selection support and dependable supply from Emmerich — expert advice and fast delivery for Teknik Makina tools are available on request. Technical Data SKU: T166-1TM Product type: Face-milling head For indexable inserts: SNEU 1206 Compatible insert manufacturer: Walter Manufacturer: Teknik Makina Facts Diameter: 80 mm Max cutting diameter: 93 mm Overall length: 50 mm Weight: 1.252 kg Cutting angle: 45° Cutting edges: 7 Torx key: T20 Torx screw: M5x12 Special features Internal coolant Suitable for face milling Compatible with Walter inserts Robust construction for CNC use Label: 80mm Planmesserkopf SNEU 1206 L50mm mit Innenkühlung FAQ What insert type is required for this face-milling head? The head accepts SNEU 1206 indexable inserts; the design supports standard insert geometries for face milling. Is internal coolant provided and how does it help? Yes, the integrated internal coolant supplies fluid directly to the cutting zone, which improves chip evacuation and extends insert life. Which manufacturer makes this tool and what is the SKU? This product is supplied by Teknik Makina and sold under SKU T166-1TM for easy identification. Can Walter inserts be used with this milling head? Compatibility with Walter indexable inserts is specified, allowing choice of graded inserts for different materials. What fastening hardware is used for insert clamping? Insert clamping uses M5x12 Torx screws tightened with a T20 key for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head for SOET 13 Indexable Inserts, 90° Cutting Angle, Internal Coolant - Teknik Makina
Take advantage of the combination of compact design, internal coolant and compatibility with SOET 13 indexable inserts for reliable face milling performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head T636TM — 80 mm diameter, internal coolant (Teknik Makina) The face milling head T636TM is a precision cutter designed for heavy-duty face milling with SOET 13 indexable inserts, featuring internal coolant for effective chip evacuation and consistent edge life. 80 mm diameter for wide face milling Internal coolant for improved cooling Accepts SOET 13 indexable inserts Six cutting edges, 90° cutting angle Consistent cooling and predictable tool life The combination of internal coolant and a compact 80 mm body ensures stable cutting conditions and reduced thermal wear on the insert seat. This results in more consistent edge life and fewer interruptions for insert changes, which supports continuous production cycles. For shops upgrading from conventional heads, the integrated coolant channel reduces heat at the cutting zone and improves chip control without adapting existing coolant supplies. High compatibility for workshop standardisation Designed specifically for SOET 13 indexable inserts and compatible with inserts from Palbit, the cutter head simplifies inventory by allowing a common insert family to be used across multiple operations. The 90° cutting angle provides true face finishes and minimal deflection in planing tasks, while accepting widely available insert geometries helps to keep tooling costs predictable and logistics straightforward. Secure fastening and straightforward maintenance The head uses M3.5x8.5 Torx screws tightened with a T15 key for repeatable clamping torque; this combination gives reliable insert fixation and quick, safe replacement cycles. The six cutting edges distribution reduces individual insert load and balances the cutter dynamically, improving surface quality. Essential service tasks can be completed with standard workshop tools, limiting downtime and maintaining productivity. Compact dimensions for versatile machine compatibility With an 80 mm diameter, a 50 mm overall length and an arbor fit of 27 mm, the cutter head fits many compact milling setups and is suitable for both small batch and series production. The weight of 1.354 kg provides a low-inertia profile that responds well on medium-speed spindles while still delivering the rigidity required for flat-face machining. This balance aids fast set-ups and efficient material removal without unnecessary machine load. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Teknik Makina face milling head T636TM into existing workflows or to request a detailed quotation and delivery options Technical Data SKU: T636TM Product type: Face milling head Brand: Teknik Makina For: SOET 13 indexable inserts Label: 80mm Planmesserkopf SOET 13 L50mm mit Innenkühlung Core specifications Diameter: 80 mm Overall length: 50 mm Weight: 1.354 kg Cutting edges: 6 Cutting angle: 90° Arbor diameter: 27 mm Torx key: T15 Torx screw: M3.5x8.5 Design & features Internal coolant: yes Compatible inserts manufacturer: Palbit Intended insert style: SOET 13 ECLASS: 21181015 UID/SKU: T636TM FAQ Can this head use Palbit SOET 13 inserts? Yes. The Teknik Makina face milling head T636TM is designed for SOET 13 inserts and is compatible with Palbit indexable inserts. Is internal coolant available through the cutter body? Internal coolant is provided; the head features integrated channels for directed coolant flow to the cutting zone. What arbor size is required for mounting? The cutter accepts a 27 mm arbor as indicated by the arbor diameter specification. How many inserts are installed and what is the cutting geometry? The head carries six inserts arranged for a 90° cutting angle, optimised for flat face milling. Which tools are needed to change inserts? Insert retention uses M3.5x8.5 Torx screws tightened with a T15 key for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Face Milling Head for WNMX 1305 Indexable Inserts L50mm With Internal Coolant - Teknik Makina
Take advantage of the combination of robust build quality, internal cooling, and precise compatibility with WNMX 1305 indexable inserts for reliable, repeatable face milling. For procurement and technical questions, contact Metav Werkzeuge or consult the specialist team for swift advice. Face milling head — for WNMX 1305 indexable inserts, 80 mm diameter, internal coolant (Teknik Makina) Face milling head for CNC face milling applications, engineered to accept WNMX 1305 indexable inserts and optimised for effective chip evacuation and consistent surface quality. 80 mm diameter for stable face milling Internal coolant for improved tool life Compatible with Korloy WNMX 1305 inserts Five cutting edges for increased productivity Higher metal removal with stable cutting conditions The milling head delivers measurable performance gains by combining an 80 mm diameter body with five cutting edges, which allows for larger depth of cut at controlled chatter levels. The larger cutting capacity reduces cycle times and increases throughput in repetitive machining tasks. The head’s mass (approx. 1.04 kg) contributes to stability during face cuts, translating technical parameters into a tangible improvement in process efficiency and surface consistency. Cleaner chips and longer insert life through internal coolant Equipped with internal coolant, the unit directs cutting fluid close to the cutting edge to support cooling and chip evacuation. For shops that aim to extend insert lifetime and maintain a steady cutting temperature, through-flow cooling reduces thermal load on the insert and minimises built-up edge formation. This technical feature converts into lower tooling consumption and fewer unscheduled tool changes during production runs. Straightforward installation and secure clamping The component uses a M4x10 torx screw with a T15 key interface for insert clamping, enabling fast and repeatable set-ups on toolholders designed for face milling heads. The straightforward fastening system reduces changeover time and lowers the risk of incorrect torquing when compared with more complex clamping systems. Clear, industry-standard fixing elements assist maintenance teams and operators in sustaining process reliability. Compatibility tailored for indexable inserts and practical workshop use Designed specifically for WNMX 1305 indexable inserts, the milling head is compatible with inserts from Korloy, which allows procurement teams to align existing supply chains without costly requalification. The nominal overall length L50 mm makes it suitable for a broad range of face milling fixtures while preserving accessibility at the cutter margin. The combination of compatibility and standard connection hardware supports a smooth integration into established tool sets. Discuss the Teknik Makina face milling head (SKU T688-1TM) with Metav Werkzeuge in Emmerich to confirm fitment and secure reliable supply directly from our European stock Technical data SKU: T688-1TM Product type: Face milling head Designation: Planmesserkopf for WNMX 1305 indexable inserts Manufacturer: Teknik Makina Compatible inserts: WNMX 1305 Compatible insert brand: Korloy Internal coolant: Yes Number of cutting edges: 5 Core specifications Diameter: 80 mm Overall length: 50 mm Weight: 1.04 kg Torx key: T15 Torx screw: M4x10 Features & compatibility Designed for face milling applications Accepts WNMX 1305 indexable inserts Through-coolant capability for better cooling and chip control Manufacturer SKU T688-1TM Produced by Teknik Makina FAQ Which insert type fits this milling head? The head is designed for WNMX 1305 indexable inserts and accepts those inserts manufactured to that specification. Can Korloy inserts be used with this tool? Yes, the face milling head is compatible with Korloy WNMX 1305 inserts as indicated in the product data. Is there internal coolant provision? Internal coolant is provided; the through-coolant capability helps cooling at the cutting edge and improves chip evacuation. How many cutting edges does the head support? The cutter body features five cutting edges, enabling extended cutting engagement and improved material removal rates. What fastening hardware is required for the inserts? Inserts are secured with M4x10 torx screws using a T15 torx key, providing a standard and reliable clamping method. Who manufactures this milling head and what is the SKU? The component is produced by Teknik Makina and listed under SKU T688-1TM for straightforward identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head for WNMX 1305 Indexable Inserts, 5 Cutting Edges, 27mm Shank - Teknik Makina
Reliable face milling with clear compatibility for WNMX 1305 indexable inserts and an 80 mm cutter diameter delivers efficient, repeatable material removal; paired with a 27 mm shank and Torx T15/M4x10 fastening for secure clamping and straightforward maintenance — order the face mill head directly via Metav Werkzeuge or consult our specialists for fitment advice. Face mill head for WNMX 1305 indexable inserts — 80 mm, 5 cutting edges (Teknik Makina) The face mill head for WNMX 1305 indexable inserts is engineered for robust face milling in production and workshop environments, combining a compact 80 mm cutter diameter with a stable 27 mm mounting to support continuous chip removal and predictable cutting performance. Face mill head for WNMX 1305 inserts 80 mm cutter diameter, robust construction 5 cutting edges for continuous material removal 27 mm shank diameter for stable mounting Torx T15 screw with M4x10 fastening Stable compatibility that simplifies tool planning The head is built specifically for WNMX 1305 style indexable inserts, with compatibility tested against the Korloy insert range. This targeted fit reduces inventory complexity and allows straightforward tool selection for series production. By matching the insert geometry, the assembly supports consistent chip evacuation and surface quality, making it easier to plan tool life and replacement cycles without guesswork. Secure clamping and quick service intervals Clamping reliability comes from the 27 mm shank and standardised screw interface. The use of a Torx T15 key and M4x10 fastening provides a secure connection that resists loosening under typical face milling loads while remaining service-friendly for insert changes. The design of the clamping system supports brief maintenance intervals and reduced machine downtime, translating into higher production availability and lower indirect costs. Designed for efficient face milling and predictable output With an 80 mm diameter and an overall height of 50 mm, the tool body concentrates stiffness where it matters to maintain cutting angles under load. The configuration with 5 cutting edges distributes engagement across the tool circumference, enabling smooth cutting action and even wear progression. Supplied by Teknik Cutting Tools, the assembly is suited to continuous face milling tasks where repeatability and straightforward insert handling are priorities for shop-floor efficiency. For procurement or technical clarification on the Teknik Cutting Tools face mill head (SKU T688TM), contact Metav Werkzeuge in Emmerich for personalised advice and fast processing: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T688TM Name: Planmesserkopf Variant: for WNMX 1305 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 80 mm Overall height: 50 mm Shank diameter (mount): 27 mm Cutting edges: 5 Torx screw: M4x10 Torx key: T15 ECLASS: 21180902 Special features Compatible inserts: WNMX 1305 Compatible insert manufacturer: Korloy Designed for face milling applications Robust mounting for production use FAQ Which inserts fit this face mill head? The face mill head accepts WNMX 1305 indexable inserts; compatibility with Korloy WNMX 1305 grades is part of the specifications for this assembly. How many cutting edges does the tool have? This face mill head is equipped with 5 cutting edges, arranged to provide continuous engagement and steady material removal. What is the mounting diameter for machine attachment? Mounting is via a 27 mm shank, designed for a stable connection to standard tool holders in milling setups. What are the cutter diameter and overall height? The cutter diameter is 80 mm and the overall height is 50 mm, dimensions chosen for balanced stiffness and accessibility. Which fastening hardware is required for inserts? Insert clamping uses an M4x10 screw driven with a Torx T15 key, ensuring secure fastening and quick servicing of the inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head SDMT 1204 L52mm With Internal Coolant, 45° Cutting Angle - Teknik Makina
Take advantage of the combination of compact design, internal coolant and compatibility with SDMT 1204 inserts for consistent surface quality and reduced downtime. Order the face milling head directly via Metav Werkzeuge or consult our specialists for specification guidance. Face milling head T360-1TM – 80 mm, internal coolant (Teknik Makina) A face milling head for SDMT 1204 indexable inserts, engineered for compact face milling and reliable coolant-fed operation. Precision 80 mm diameter Integrated internal coolant Six cutting edges for smoother cuts Compatible with SDMT 1204 inserts Improved material removal with compact diameter and stable geometry The compact 80 mm diameter body offers a balanced compromise between accessibility and rigidity, enabling effective face milling where space is limited. With six cutting edges and a 45° cutting angle, the tool reduces axial loads while promoting even distribution of cutting forces; this results in steadier engagement, reduced vibration and an improved surface finish. The design is optimised for both light roughing and finishing operations, helping maintain cycle times without sacrificing workpiece quality. Longer tool life and better chip control through internal coolant An integrated internal coolant channel supplies coolant directly to the cutting zone, improving heat dissipation and promoting efficient chip evacuation. This targeted cooling helps extend insert lifetime and lowers the frequency of tool changes, supporting uninterrupted production sequences. Maintenance is straightforward: insert retention uses M4x10 screws secured with a T15 torx key, enabling fast, repeatable insert changes and predictable workshop workflows. Broad compatibility and practical dimensions for workshop workflows Designed for SDMT 1204 indexable inserts and compatible with inserts from ZCC, the head accepts widely available cutting grades and geometries to suit varied materials and surface requirements. The compact overall length of 52 mm and 27 mm arbor diameter make the unit suitable for tooling stations with limited projection where rigidity is essential. Supplied by Teknik Cutting Tools under SKU T360-1TM, the assembly supports flexible tooling strategies and straightforward inventory management. For precision face milling with internal coolant, request product and application advice from Metav Werkzeuge — delivery and technical consultation from Emmerich available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T360-1TM Product type: face milling head Compatible inserts: SDMT 1204 Brand: Teknik Makina Facts Diameter: 80 mm Overall length: 52 mm Weight: 1.049 kg Cutting edges: 6 Cutting angle: 45° Arbor diameter: 27 mm Torx key: T15 Torx screw: M4x10 Internal coolant: Yes eClass: 21181015 Special features Internal coolant channel Compatible with ZCC insert manufacturer For SDMT 1204 indexable inserts Compact design for limited projection FAQ Which inserts fit this head? The face milling head accepts SDMT 1204 indexable inserts; compatibility with ZCC-manufactured inserts is specified for SKU T360-1TM. Is coolant supplied through the body or externally? This model features an integrated internal coolant channel that directs coolant to the cutting edge to improve tool life and chip evacuation. How many cutting edges and what effect does the geometry have? The head uses six cutting edges with a 45° cutting angle, delivering balanced cutting forces and a smoother surface finish during face milling. What fastening and service tools are required? Insert retention uses M4x10 screws tightened with a T15 torx key for quick and reliable insert changes. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head SNKX 1206 With Internal Coolant, 45° Cut Angle - Teknik Makina
Robust machining performance meets straightforward maintenance: the face milling head combines an 80 mm nominal diameter, internal coolant and compatibility with SNKX 1206 indexable inserts to deliver consistent surface finish and reduced tool-change time. Order directly via Metav Werkzeuge or consult our specialists for precise application guidance. Face milling head for SNKX 1206 indexable inserts — 80 mm, internal coolant (Teknik Makina) The Face milling head is a precision tool body intended for medium‑to‑heavy face milling operations, compatible with SNKX 1206 indexable inserts and optimised for use where chip control and repeatable surface quality are essential. Internal coolant for improved tool life Compatible with SNKX 1206 Korloy inserts 80 mm nominal diameter for versatile milling Seven cutting edges for extended productivity Efficient cooling that reduces downtime and extends insert life The integrated internal coolant channel directs cutting fluid directly to the cutting zone, which significantly improves heat dissipation and chip evacuation. This results in longer insert life and fewer interruptions for tool changes, supporting higher machine utilisation and lower running costs. In practical terms, the targeted coolant flow reduces thermal load on the insert edge and helps maintain dimensional stability during longer cuts. For operations where coolant access is already present, the internal feed is a direct performance upgrade without major setup changes. Compatibility and maintenance that keep production moving Designed specifically for SNKX 1206 indexable inserts and recommended for use with Korloy inserts, the head simplifies logistics and inventory planning. The clamping system uses M4x12.5 Torx screws and a T15 Torx key for secure, repeatable insert retention, enabling quick replacement and minimal downtime. The clear specification facilitates procurement and tool management across multiple machines, while the standardised fastening reduces the risk of incorrect assembly and ensures consistent cutting geometry across shifts. Precision geometry for stable, high‑quality face milling With an 80 mm nominal diameter and a maximum cutting diameter of 93 mm, the cutter body provides a broad cutting envelope suited to face and shallow shoulder milling. The 45° cutting angle offers a balance between cutting force and surface finish, while the configuration of seven cutting edges allows for smooth material removal and even wear distribution. The assembly’s mass (approx. 1.334 kg) contributes to vibration damping for steadier cuts and better surface quality on the workpiece. These attributes combine to deliver dependable performance in repetitive production tasks and occasional heavier passes. For reliable, coolant‑assisted face milling with proven compatibility to SNKX 1206 inserts, contact Metav Werkzeuge to request detailed application advice or to place an order for the Teknik Cutting Tools face milling head SKU T325-1TM Technical data Article number: T325-1TM ECLASS: 21181015 Product type: Face milling head Manufacturer: Teknik Makina Facts Nominal diameter: 80 mm Maximum cutting diameter: 93 mm Overall length: 52 mm Weight: 1.334 kg Number of cutting edges: 7 Cutting angle: 45° Special features Internal coolant: yes Compatible inserts: SNKX 1206 Recommended insert brand: Korloy Torx key: T15 Torx screw: M4x12.5 SKU: T325-1TM FAQ Which indexable inserts fit this milling head? The face milling head accepts SNKX 1206 indexable inserts; Korloy inserts are specified as the compatible brand for reliable seating and performance. Does the tool body provide coolant to the cutting edge? Yes — the head includes internal coolant supply to the cutting zone, improving cooling and chip evacuation during sustained cuts. What are the main dimensions to consider for setup? Nominal diameter is 80 mm, maximum cutting diameter 93 mm, and overall length 52 mm, which should be checked against machine‑tool clearance and fixturing. How many cutting edges are provided and what is the cutting geometry? The tool features seven cutting edges arranged for even wear distribution and a 45° cutting angle to balance cutting forces and surface finish. Which screws and key are required for insert clamping? Insert clamping uses M4x12.5 Torx screws secured with a T15 Torx key to ensure repeatable, secure fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head SNMU 1305 L52mm With Internal Cooling, 45° Cutting Angle - Teknik Makina
Take advantage of a compact, high‑performance solution that combines the 80 mm body diameter, internal coolant and compatibility with SNMU 1305 indexable inserts to maintain stable cutting and consistent surface finish. Order the tool directly via Metav Werkzeuge or contact the consultants for an application check. Face milling head for SNMU 1305 indexable inserts — 80 mm, internal coolant (Teknik Makina) A robust face milling head for SNMU 1305 indexable inserts, designed for efficient face milling with through‑coolant delivery and secure Torx fixing for reduced downtime. 80 mm body diameter Internal coolant for improved tool life Compatible with ISCAR SNMU 1305 Seven cutting edges, 45° cutting angle Faster material removal with controlled coolant delivery The milling head is engineered to deliver coolant directly to the cutting zone via internal coolant, which reduces thermal load and helps maintain consistent cutting conditions. With a maximum cutting diameter of 93 mm and an 80 mm body diameter, the tool enables wider passes and stable metal removal rates. This results in improved surface integrity and extended insert life, translating into fewer tool changes and higher productive uptime for milling operations. Secure clamping and predictable cutting geometry for consistent results A 45° cutting angle and seven indexed cutting positions provide a good balance between cutting force distribution and surface finish. Fast, repeatable insert clamping is achieved using M5x12 Torx screws tightened with a T20 Torx key, offering reliable torque transmission and simple maintenance. Compatibility with ISCAR SNMU 1305 inserts ensures access to a broad selection of grades and geometries, enabling optimisation of feed and speed for different workpiece materials. Compact design for workshop integration and straightforward handling With an overall length of 52 mm and a weight of 1.147 kg, the head is compact enough for tight set‑ups while remaining rugged for industrial use. The construction supports quick indexability of inserts and straightforward replacement procedures, reducing non‑productive time during tool changes. The combination of compact form factor, internal coolant and proven insert interface makes this tool a practical choice for shops seeking repeatable face milling performance with established insert systems. Contact Metav Werkzeuge for an application review of the Teknik Makina face milling head or request a compatibility assessment for SNMU 1305 inserts Technical data SKU: T236-1TM Type: Face milling head ECLASS: 21181015 Numbers / Core technical data Body diameter: 80 mm Max cutting diameter: 93 mm Overall length: 52 mm Weight: 1.147 kg Cutting positions: 7 Cutting angle: 45° Special features Internal coolant Compatible with SNMU 1305 indexable inserts Torx screw: M5x12 Torx key: T20 Manufacturer: Teknik Makina FAQ Which insert type fits this milling head? The head accepts SNMU 1305 indexable inserts; compatibility with ISCAR insert geometries is specified for flexible grade and chip‑control selection. Is through‑coolant available and how does it help? Yes — the internal coolant channel supplies coolant to the cutting edge, reducing heat generation and improving insert life and surface finish. What torque and screw type secure the inserts? Inserts are retained with M5x12 Torx screws requiring a T20 Torx key for secure and repeatable clamping. How many cutting positions are provided? The tool offers seven indexed cutting positions, allowing multiple re‑uses of each insert before replacement. Can this head be used in confined setups? The compact overall length of 52 mm and modest weight make the head suitable for constrained fixtures and tight‑clearance milling applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Milling Head SNMX 1206 L50mm With Internal Coolant, 88° Cutting Angle - Teknik Makina
Benefit from robust build quality, internal coolant and an 80 mm diameter for consistent facing performance; order the cutter head directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head for SNMX 1206 indexable inserts — 80 mm, internal coolant (Teknik Makina) The face milling head is a compact, production-orientated cutter head designed for SNMX 1206 indexable inserts, delivering steady material removal with integrated coolant and easy insert change. 80 mm cutter diameter for broad facing Internal coolant for improved chip evacuation Designed for SNMX 1206 indexable inserts Seven cutting edges for efficient material removal Reduce cycle times with efficient cutting geometry The cutter head is engineered to deliver predictable, repeatable results in facing operations by combining an 80 mm tool diameter with seven cutting edges, which spreads wear and reduces index changes. The use of standard SNMX 1206 indexable inserts means simple stocking of consumables and consistent surface finish. With internal coolant routed directly to the cutting zone, heat is managed at source, helping to maintain cutting-edge life and stabilise machining performance under continuous production loads. Quick serviceability for uninterrupted production Maintenance and insert replacement are designed for workshop efficiency: the head uses Torx T15 drive engagement and M4x12.5 screws for secure clamping and fast changeover. The compact 50 mm overall length and a nominal mass of 1.213 kg contribute to stable runout and predictable balance when mounted on toolholders with a 27 mm interface. These mechanical choices reduce setup time and help keep machining cycles competitive, while the robust connection ensures repeatable seating of inserts. Built for demanding facing operations and reliable supply Compatible with inserts from Korloy and specified insert geometry, the head supports a range of facing tasks where repeatability and coolant-assisted chip control are priorities. As part of a production toolkit, this milling head integrates with established tooling systems and helps reduce unplanned downtime. Metav Werkzeuge’s European distribution and quality-filter approach further ensures dependable availability and straightforward order processing for workshops and industrial buyers. Contact Metav Werkzeuge to reserve the Teknik Cutting Tools face milling head (SKU T345-1TM) for your production line and arrange personalised application guidance from our consultants Technical Data Article number: T345-1TM Manufacturer: Teknik Makina Product type: Face milling head Description: 80 mm face milling head for SNMX 1206 indexable inserts with internal coolant Facts Diameter: 80 mm Overall length: 50 mm Shank diameter: 27 mm Number of cutting edges: 7 Cutting angle: 88° Weight: 1.213 kg Screw: M4x12.5 Torx key: T15 ECLASS: 21181015 Special features Internal coolant Compatible with SNMX 1206 inserts Compatible insert manufacturer: Korloy Designed for indexable insert facing Seven cutting edges for efficient material removal FAQ Which indexable inserts fit this milling head? The face milling head accepts SNMX 1206 indexable inserts and is compatible with inserts from Korloy; the cutter is supplied as SKU T345-1TM by Teknik Cutting Tools. Is coolant delivered through the tool? Yes — the tool features internal coolant, feeding the cutting edges directly to improve chip control and tool life during heavy-facing operations. What mounting and fastening specifications are required? Mounting uses a 27 mm interface; insert clamping is by M4x12.5 screws with Torx T15 drive for reliable retention and quick service. For which applications is this cutter head intended? This cutter head is optimised for facing and similar finishing or semi-finishing operations where controlled chip evacuation and repeatable surface quality are required; see SKU T345-1TM for exact specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Corner Cutter 90° For APKT 1604 Indexable Inserts, 6 Cutting Edges, 27mm Shank - Teknik Makina
Take advantage of the combination of precise corner machining, robust Torx clamping and broad compatibility with APKT 1604 inserts for consistent cycle times and low set‑up effort. Order the cutter head directly via Metav Werkzeuge or consult the technical team for application advice. Corner cutter head — Indexable cutter head for APKT 1604, 90° (Teknik Makina) The Corner cutter head is an indexable cutter head engineered for accurate 90° corner machining with APKT 1604 indexable inserts, suitable for standard turning and light milling set‑ups Compatible with APKT 1604 indexable inserts 90° cutting angle for accurate cornering Secure M4x10 Torx fastening with T15 key 27 mm mounting shank diameter Precision corners with reliable geometry and stable repeatability The machining head delivers a controlled cutting geometry thanks to the 90° cutting angle and a rigid body that limits deflection under intermittent loads. Using APKT 1604 indexable inserts provides a predictable chip flow and simplifies tool inventory management, while the six cutting positions contribute to extended tool life. The design reduces set‑up time and supports repeatable corner quality, which aids throughput optimisation on batch runs and short production series. Bold material choices and a compact profile keep the effective cutting zone close to the spindle, improving process stability in typical workshop environments. Fast, secure insert clamping for reduced downtime A straightforward clamping arrangement with M4x10 Torx screws and a T15 key ensures quick insert changes and consistent seat contact, lowering the risk of chatter caused by loose fittings. The holder accepts inserts from Korloy and other manufacturers conforming to the APKT 1604 form, making it easy to integrate into existing toolsets. The torqueable Torx fixing provides repeatable preload across cycles, which supports consistent cutting conditions and reduces the need for frequent re‑checks. These features support higher machine utilisation and fewer interruptions for maintenance. Compact mounting with industrial compatibility The tool is engineered around a 27 mm mounting shank, offering a compact footprint while keeping sufficient mass for vibration damping. With an external diameter of Ø 80 mm and a total length of 52 mm, the head is suited to tight set‑ups where proximity to the workpiece matters. The unit weight of 1.159 kg contributes to stable rotational balance without excessive spindle load. Such dimensional data are useful when planning tool offsets, clearance envelopes and collision checks in CAM programming, enabling safer and more reliable NC routines. Practical workshop details that matter in daily use Six effective cutting edges and compatibility with standard insert geometries reduce tooling costs through longer insert rotation and simplified stocking. The robust construction and standard fastening parts mean spare parts are easy to source and replacement is straightforward. The head’s dimensions and mounting arrangement support quick verification with common workshop gauges, while the proven clamping method minimises the influence of operator variance on process outcomes. For procurement and planning, the modular nature of the holder supports staged upgrades without wholesale changes to holders or inserts. For application-specific recommendations or to secure the Teknik Cutting Tools indexable cutter head (SKU T186TM) contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: T186TM Manufacturer: Teknik Makina Mounting diameter: 27 mm External diameter: 80 mm Total length: 52 mm Weight: 1.159 kg Cutting angle: 90° Number of cutting edges: 6 Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 FAQ What insert type fits this cutter head? The head accepts APKT 1604 indexable inserts; Korloy APKT 1604 inserts are specified as compatible and standard APKT 1604 geometries will seat correctly. Which mounting shank diameter is required? A 27 mm mounting shank is provided for machine attachment and must match the toolholder or adapter in use for proper installation. How is the insert secured in the head? Inserts are clamped using M4x10 Torx screws tightened with a T15 key, ensuring consistent preload and fast changeover. Is the cutter head suitable for high‑speed applications? The head’s compact geometry and secure clamping support stable performance; final suitability depends on spindle dynamics and selected insert grade. What are the main dimensions to check for NC programming? Key dimensions include Ø 80 mm external diameter, 52 mm total length and the 27 mm mounting diameter for clearance and collision planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Corner Cutter 90° For APMT 1604 Inserts 7 Teeth, 27mm Shank - Teknik Makina
Take advantage of a rigid 27 mm shank and a true 90° cutting angle to secure repeatable corner cuts, while compatibility with APMT 1604 indexable inserts keeps tooling costs manageable; order directly via Metav Werkzeuge or consult our specialists for application support. Corner turning head T247TM — 90° cutting angle, 27 mm shank by Teknik Makina Corner turning head T247TM is a compact toolholder engineered for external turning with APMT 1604 indexable inserts, designed to deliver repeatable corner geometries in CNC turning and finishing operations. 90° cutting angle for precise corner cuts 27 mm shank for rigid machine mounting Compatible with APMT 1604 indexable inserts Torx M4x10 fixing screw with T15 key included Delivering repeatable corner cuts through rigid mounting The Teknik Makina corner head is built around a 27 mm shank to provide rigid mounting and reduced deflection during cutting. The defined 90° cutting angle assures consistent corner profiles and simplifies programming by aligning the insert geometry with common toolpath strategies. For workshops focused on tight tolerances, the combination of shank stiffness and a precise cutting geometry reduces part variation and rework, supporting higher first-pass yields. Faster insert changes and straightforward maintenance Designed for quick servicing, the head accepts standard APMT 1604 indexable inserts and secures them with a Torx M4x10 fixing screw operated by a T15 key. Indexable inserts mean tool bodies remain in service while only the small carbide inserts are replaced, lowering consumable costs and minimising downtime. Compatibility with Korloy-type inserts expands sourcing options and keeps inventory simple for production environments. Space-efficient design for versatile machine setups With an outer diameter of 80 mm and an overall length of 52 mm, this compact toolhead fits into restricted tool stations without sacrificing performance. The unit’s mass (approx. 1.249 kg) contributes to stability during operation, while the modest envelope supports close-proximity tooling and multi-tool turrets. The design helps maintain a tidy toolroom stock and supports flexible machine layouts for mixed-production shops. Contact Metav Werkzeuge to discuss workshop compatibility for the Teknik Makina corner turning head T247TM, request a tailored quotation or check stock availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T247TM Manufacturer: Teknik Makina Product name: Corner turning head for APMT 1604 indexable inserts Facts Shank diameter: 27 mm Diameter: 80 mm Overall length: 52 mm Weight: 1.249 kg Cutting angle: 90° Number of cutting edges: 7 Special features Compatible inserts: APMT 1604 Compatible inserts manufacturer: Korloy Fixing screw: Torx M4x10 Tool key: T15 FAQ What inserts fit this toolhead? The corner turning head accepts APMT 1604 indexable inserts; Korloy-format inserts are compatible with this holder. Which shank diameter is required for mounting? Mounting requires a machine tool spindle or turret capable of accepting a 27 mm shank, ensuring rigid support for stable cutting. What is the cutting geometry of the head? The head provides a 90° cutting angle, designed for accurate corner and shoulder turning operations. How is the insert secured and replaced? Inserts are secured with a Torx M4x10 fixing screw; replacement is done with a T15 key for quick, reliable changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Corner Cutter 90° For XNEX 0806 Indexable Inserts M4x12.5 Torx T15, 50mm Overall Length - Teknik Makina
Take advantage of a robust combination of precise square‑shoulder machining, broad compatibility with XNEX 0806 indexable inserts, and simple serviceability for a steady production flow. Order or request guidance directly via Metav Werkzeuge to ensure the component fits the intended toolholder and shortens setup times. Corner Insert Head T844TM — 90° cutting angle, Ø80 mm — Teknik Makina The Corner Insert Head T844TM is a compact indexable insert holder designed for square‑shoulder turning and shoulder finishing in CNC turning centres 90° cutting angle for precise square turning Ø80 mm head diameter for increased rigidity Compatible with XNEX 0806 indexable inserts Torx M4x12.5 screw with T15 key for secure clamping Achieve consistently accurate square shoulders with rigid support The T844TM corner insert head is engineered for repeatable square‑shoulder machining by combining a 90° cutting angle with an Ø80 mm head diameter, offering a stable cutting geometry that reduces chatter and deflection. The holder’s shank diameter 27 mm and compact overall length 50 mm contribute to a stiff assembly that maintains dimensional tolerances across batches. Such mechanical stability improves first‑pass yield and reduces finishing operations, delivering measurable productivity gains for medium‑duty turning applications. Broad compatibility reduces inventory complexity and downtime Designed for use with XNEX 0806 indexable inserts, the head accepts inserts from major manufacturers including SECO and WINSTAR, which simplifies supply chain management and gives flexibility when sourcing cutting edges. Fast, tool‑room maintenance is supported by the Torx M4x12.5 fixing screw and the matching T15 key, enabling quick insert changes and reliable clamping torque. The result is shorter tool change intervals, fewer stoppages and a lower total cost of ownership for production lines that handle varied batches. Performance characteristics that support efficient shop workflows With seven cutting edges allocated across its geometry, the turner benefits from efficient load distribution and predictable wear behaviour, which extends effective cutting time between edge changes. The holder’s mass (approximately 1.063 kg) and balanced design help maintain spindle stability at typical turning speeds, while the square‑angled configuration is ideally suited to shoulder finishing, profiling and precision line turning. These attributes translate directly into consistent surface finish and reduced scrap rates for precision‑sensitive components. Simple installation and clear specifications for integration Installation requires only a T15 Torx key to secure the M4x12.5 fixing screw, and the Ø27 mm mounting diameter fits compact toolposts and modular carriers designed for small to medium‑sized lathes. The T844TM designation and clear dimensional data make it straightforward to confirm compatibility with existing toolholders and adapters. For operations upgrading to indexable tooling, the head provides a compact, reliable option that balances rigidity and accessibility, supporting both batch production and bespoke machining tasks. For tailored advice on integrating the Teknik Cutting Tools T844TM corner insert head into existing toolholder systems, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — the team will assist with compatibility checks, supply options and efficient implementation. Technical Data SKU: T844TM Name: Corner insert head for XNEX 0806 indexable inserts Brand: Teknik Makina Fixing screw: Torx M4x12.5 Torx key: T15 Facts Diameter: 80 mm Shank diameter (d): 27 mm Overall length: 50 mm Cutting angle: 90° Cutting edges: 7 Weight: 1.063 kg Special features Compatible with XNEX 0806 indexable inserts Suitable for inserts from SECO and WINSTAR Torx M4x12.5 fixing screw Torx key size T15 SKU T844TM Manufacturer: Teknik Cutting Tools FAQ What inserts are compatible with this head? The corner insert head accepts XNEX 0806 indexable inserts and is compatible with inserts from SECO and WINSTAR, enabling straightforward sourcing of cutting edges. Is the head suitable for square‑shoulder finishing? Yes. The 90° cutting angle and Ø80 mm head diameter make the component specifically suitable for precise square‑shoulder turning and shoulder finishing operations. Which fixing hardware is required for insert clamping? Clamping is performed with a Torx M4x12.5 screw using a T15 key, facilitating quick and secure insert changes. What are the mounting dimensions needed for toolholder integration? The head requires a 27 mm mounting diameter and an overall length of 50 mm, making it compatible with compact toolholders and modular carriers designed for medium‑duty turning. How does the design influence machining stability? The combination of a rigid Ø80 mm head, compact length and balanced mass (≈1.063 kg) reduces deflection and vibration, improving dimensional stability and surface finish during turning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Corner Turning Head For ANKX 0706 Indexable Inserts, 90° Cutting Angle, M5x12 Torx - Teknik Makina
Take advantage of a compact, rigid toolhead with a 90° cutting angle and compatibility with ANKX 0706 indexable inserts; its robust Ø80 mm head and M5x12 Torx fastening ensure stable corner turning and easy insert replacement — order via Metav Werkzeuge or consult their specialists for application advice. Angle Turning Head T446TM — 90° tool head for ANKX 0706 indexable inserts by Teknik Makina The Angle Turning Head T446TM is a purpose-built corner turning toolhead for CNC lathes and turning centres, engineered to accept ANKX 0706 indexable inserts and deliver reliable 90° shoulder and profile turning in a compact form. 90° cutting angle for precise corner turning Compatible with ANKX 0706 indexable inserts Torx M5x12 fastening, T20 key required Robust Ø80 mm head, 1.238 kg mass Achieve accurate corner turning with a defined 90° geometry The head’s 90° cutting angle provides a predictable cutting geometry for shoulder, profiling and facing operations. By accepting standard ANKX 0706 indexable inserts, the holder allows quick insert changes and consistent results across production runs. The defined geometry reduces setup variables and supports repeatable axial positioning, which improves machining accuracy and lowers scrap rates. For shops moving between roughing and finishing passes, the stable angle facilitates predictable tool engagement and surface finish control. Secure clamping and vibration-resistant design for stable machining A secure fastening system based on Torx M5x12 screws (drive size T20) holds the insert assembly firmly, while the 27 mm shank interface ensures correct seat in compatible toolholders. The combination of a solid connection and a substantial Ø80 mm head mass (approx. 1.238 kg) increases damping during cutting, reducing chatter on medium-duty lathes and turning centres. This stability translates into longer insert life and fewer rework cycles — a direct efficiency gain for batch production or single-part setups. Flexible operations and straightforward maintenance for workshop efficiency The compact 52 mm overall length and provision for six cutting edges allow for compact toolpaths without sacrificing insert capacity, making the head suitable for confined turrets and multi-axis configurations. The design focuses on quick insert replacement and low downtime: worn inserts are changed without complex adjustments, restoring cutting performance rapidly. Built for compatibility with ISCAR-manufactured inserts, the unit supports common tooling standards, simplifying inventory and reducing the need for bespoke tooling solutions. For robust, repeatable corner turning choose the Teknik Cutting Tools Angle Turning Head T446TM—contact Metav Werkzeuge in Emmerich for tailored application advice and parts supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: T446TM Name: Eckmesserkopf / Angle turning head Manufacturer: Teknik Makina Core specifications Shank diameter: 27 mm Weight: 1.238 kg Diameter: 80 mm Overall length: 52 mm Cutting angle: 90° Cutting edges: 6 Fastening screw: M5x12 Features / Compatibility Compatible inserts: ANKX 0706 Indexable Inserts Suitable for inserts by: ISCAR Torx key size: T20 SKU: T446TM Files: 62de7ef5a9cff922f4703d5a, 62de7e6e0aced56449540ea5 FAQ Which indexable inserts fit this toolhead? The head is specified for ANKX 0706 indexable inserts; the Angle Turning Head T446TM accepts these standard inserts for shoulder and profile turning. What torque or driver is required for insert clamping? Insert clamping uses a M5x12 Torx screw; a T20 Torx key is required to secure and remove the fastening screw on the T446TM. Which manufacturers’ inserts are compatible? The toolhead is compatible with inserts from ISCAR and other suppliers offering ANKX 0706-format indexable inserts; the Angle Turning Head T446TM follows that common insert interface. What machines is the head suited to? With a 27 mm shank interface and compact 52 mm length, the head is suited to conventional turrets and compact turrets on medium-duty CNC lathes and turning centres; its mass and diameter support stable cutting. How many cutting edges are available before replacement? The design provides for six cutting edges, enabling multiple indexings per insert and extended service intervals for the Angle Turning Head T446TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Indexable Face Mill For RDMT 1604 Inserts, 6 Teeth, 27mm Shank - Teknik Makina
The combination of a robust 80 mm cutting diameter, six cutting edges and a secure 27 mm arbor results in efficient material removal and stable tool life; order the cutter directly via Metav Werkzeuge or consult our experts for application advice. Round insert face mill T274TM — 80 mm diameter, 6 cutting edges (for RDMT 1604 indexable inserts) by Teknik Makina The Round insert face mill T274TM is a compact milling head for general-purpose and production milling where RDMT 1604 indexable inserts are used, delivering stable engagement and straightforward indexable-insert changes 80 mm cutting diameter for broad engagement Six cutting edges for continuous chip load distribution Compatible with RDMT 1604 indexable inserts 27 mm arbor for secure clamping and repeatability High productivity through geometry and edge count The milling head combines an 80 mm diameter with six cutting edges to increase cutting continuity and reduce the load per tooth. This geometry enables higher feed per rev while maintaining surface quality, so production cycles run more predictably. The distributed cutting action lowers vibration and contributes to longer insert life, which reduces tool change frequency and supports steady throughput on the shop floor. Secure clamping and standardised maintenance features The tool body is engineered for repeatable seating and easy maintenance: a 27 mm arbor provides stable mounting, while the locking arrangement uses a M4x10 locking screw and a M4.5x11 Torx screw for insert retention. A Torx key T20 and the U-plate reference BSP010 simplify replacement and indexing of inserts. These details mean less downtime for service and consistent cutting geometry after each insert change. Compact design for handling and process stability With an overall length of 50 mm and a weight of about 0.89 kg, the cutter balances rigidity and manoeuvrability. The relatively short overhang reduces bending moments and improves chatter resistance, which is beneficial in both small jobbing machines and larger CNC centres. The compact form factor also eases tool storage and handling during routine maintenance. Versatility in common milling workflows Designed for use with RDMT 1604 indexable inserts, the tool suits a variety of face milling and light profiling operations where indexed inserts are preferred. The combination of standard fasteners and a common insert format ensures spare parts and replacements are readily available, supporting uninterrupted production and a straightforward spare-parts strategy. Contact Metav Werkzeuge for tailored application advice or to secure supply of the Teknik Cutting Tools round insert face mill T274TM from our Emmerich distribution centre — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T274TM Manufacturer: Teknik Makina Product name: Round insert face mill T274TM Facts Diameter: 80 mm Cutting edges: 6 Shank / arbor diameter: 27 mm Overall length: 50 mm Weight: 0.89 kg Special features For RDMT 1604 indexable inserts Locking screw: M4x10 Torx screw: M4.5x11 Torx key size: T20 U-plate: BSP010 FAQ What insert type does this cutter use? The cutter is designed for RDMT 1604 indexable inserts, which allow quick indexing and predictable cutting geometry. How is the cutter clamped to the spindle? Clamping is provided via a 27 mm arbor diameter for secure mounting and repeatable positioning. Which screws and tools are required for insert changes? Insert retention uses a M4x10 locking screw and a M4.5x11 Torx screw; a T20 Torx key is specified for maintenance. Is the tool suitable for high-volume production? Yes; the combination of multiple cutting edges and a stable arbor connection supports continuous production with reduced insert wear. What are the dimensional limits to consider when fitting the cutter? Key dimensions are 80 mm cutting diameter, 50 mm overall length and 27 mm arbor — verify these against the machine’s tool holder clearances. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Face Mill For RPMT 1606 Inserts With Internal Coolant, 6 Teeth - Teknik Makina
The combination of an 80 mm diameter, six cutting edges and integrated internal coolant delivers reliable material removal and extended insert life; choose this compact, secure system for stable face milling operations. Order the round insert milling cutter directly via Metav Werkzeuge or consult the specialists for integration advice. Round Insert Milling Cutter for RPMT 1606 Indexable Inserts — 80 mm, internal coolant (Teknik Makina) The Round Insert Milling Cutter is a compact face milling head designed for stable, high-feed operations using RPMT 1606 indexable inserts and offering coolant through the body for controlled heat management. 80 mm diameter for stable material removal Six cutting edges for high productivity Internal coolant for improved chip evacuation Compatible with RPMT 1606 inserts (Korloy) Faster material removal with stable cutting geometry The 80 mm diameter head and the arrangement of the six cutting edges create a robust cutting geometry that reduces vibration and increases metal removal rates. In practical terms, this means shorter cycle times and more consistent surface finishes when machining castings or steel components. The design supports predictable tool behaviour at moderate to high feeds, translating the cutter’s specifications into measurable productivity gains on batch and single-part production alike. Coolant-through design protects inserts and reduces downtime The internal coolant channel supplies cutting fluid directly to the cutting zone to support chip evacuation and control heat generation. Direct coolant reduces thermal loads on the cutting edges and lowers the risk of built-up edge, which in turn improves tool life and stabilises part tolerances. For workshops where changeover and tool cost are critical, this feature helps reduce unplanned insert replacement and keeps machines running to schedule. Secure clamping and simple serviceability for workshop efficiency Fast, repeatable fastening is provided via M5x12 Torx screws and a T20 key, ensuring secure clamping of the indexable inserts and straightforward maintenance procedures. The cutter accepts RPMT 1606 inserts and is compatible with inserts from Korloy, enabling flexible inventory management. The compact overall length and modest mass make handling and tool changes easier for operators, while the clearly defined screw and key types simplify spare part stocking and service routines. Practical applications and integration into production Designed as a face milling head for a variety of workpieces, the tool is well suited to light to medium-duty roughing and finishing tasks on steel, cast iron and alloy components where RPMT 1606 grades perform best. The compact form factor and coolant feed make it a practical choice for machining centres with limited tool clearance. For procurement and supply reliability, Metav’s European distribution offers a dependable channel for fast replenishment and expert advice from a partner experienced in precision tooling. Contact Metav Werkzeuge today to secure availability of this Teknik Cutting Tools face milling solution and to discuss the best RPMT 1606 insert grades for the intended application Technical Data SKU: T718-1TM Diameter: 80 mm Overall length: 50 mm Number of cutting edges: 6 Weight: 1.048 kg Facts Insert type: RPMT 1606 Insert manufacturer compatibility: Korloy Torx screw: M5x12 Torx key: T20 Coolant through body: Yes Special features Face milling head design Compact overall length Secure Torx clamping Suitable for workshop and industrial machining FAQ What insert type does this cutter accept? The cutter accepts RPMT 1606 indexable inserts; it is supplied to work with Korloy grades and similar geometries suitable for face milling. Is the cutter coolant-fed and how does that help? Yes — the tool features internal coolant, which directs fluid to the cutting zone for improved chip evacuation and longer tool life. Which fastening hardware is required for insert replacement? Insert retention uses M5x12 Torx screws tightened with a T20 key for secure and repeatable clamping. What applications suit this face milling head? The design is ideal for face milling tasks on steel and cast iron components where a compact, coolant-fed head and six cutting edges deliver stable material removal. What is the product SKU for reorder or spare part queries? The SKU for this face milling cutter is T718-1TM, which should be referenced for ordering or spare hardware. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Insert Turning Head for LNGU 15T6 Indexable Inserts, 90° Cutting Angle, M4x11 Torx - Teknik Makina
Take advantage of a compact tool head that combines secure clamping, precise 90° geometry and wide compatibility with LNGU 15T6 indexable inserts for steady, repeatable turning performance — order via Metav Werkzeuge or consult our specialists for application advice. T960TM right-angle turning head – 90° cutting geometry, for LNGU 15T6 indexable inserts (Teknik Makina) T960TM right-angle turning head for turning and shoulder operations with LNGU 15T6 indexable inserts, designed for stable mounting in standard 27 mm toolholders 90° cutting angle for perpendicular turning Compatible with LNGU 15T6 indexable inserts 27 mm shank diameter for sturdy mounting Torx M4x11 clamping screw, T15 key 80 mm head diameter, 7 cutting edges Precision and rigidity for consistent component quality The T960TM is engineered to provide a 90° cutting angle that simplifies shoulder and face turning while preserving dimensional accuracy. A 27 mm shank delivers increased stiffness at the toolholder interface, which reduces vibration and secures a more consistent surface finish and tighter tolerances in serial production. The compact 80 mm head diameter and an overall length of 50 mm make the unit well suited to confined setups where rigidity and accessibility are equally important. These design choices translate into fewer reworks and higher first-pass yield for repetitive machining tasks. Fast insert changes and secure clamping to keep production moving The tool head accepts LNGU 15T6 indexable inserts and is specified as compatible with Kennametal insert geometries, enabling rapid plate changes and straightforward inventory management. Insert retention is provided by a Torx M4x11 clamping screw driven with a T15 key, offering a reliable clamp force with minimal setup time. Quick, repeatable insert changes reduce machine downtime and support lean workflows on the shop floor, allowing operators to maintain cycle times without compromising safety or clamping integrity. Robust geometry and simple integration for versatile turning tasks With seven defined cutting facets and a balanced mass of 1.133 kg, this right‑angle tool head is dimensioned for stability during interrupted cuts and heavier engagement. The short 50 mm overall length helps to limit overhang and maintain cutting stability even in heavier machining conditions. Compatibility with standard 27 mm toolholders ensures easy integration into existing turret and toolpost arrangements, so the head can be deployed across multiple lathes without extensive fixturing changes. The result is a practical, durable solution that supports predictable throughput and long service intervals. Contact Metav Werkzeuge today to discuss the T960TM right‑angle turning head from Teknik Makina, request technical matching for specific insert grades or arrange specialist advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T960TM Manufacturer: Teknik Makina Facts Shank diameter: 27 mm Head diameter: 80 mm Overall length: 50 mm Weight: 1.133 kg Cutting angle: 90° Number of cutting facets: 7 Special features Compatible insert type: LNGU 15T6 Compatible insert manufacturer: Kennametal Clamping screw: Torx M4x11 Torx key size: T15 FAQ What inserts fit this turning head? The T960TM is specified for LNGU 15T6 indexable inserts and is compatible with Kennametal insert types of the same designation. Which shank diameter is required for mounting? This right‑angle turning head requires a 27 mm toolholder bore for correct and secure mounting. How is the insert secured in the head? Inserts are retained with a Torx M4x11 clamping screw that is tightened with a T15 key to ensure consistent clamping force. Is the tool head suitable for shoulder and facing operations? Yes; the 90° cutting angle and compact geometry make the head well suited to perpendicular turning, face cutting and shoulder work where rigidity is essential. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Tool Holder for TPKN 1603–2204 Indexable Inserts, 90° Cut Angle, 4 Cutting Edges, M8x24 Clamp - Teknik Makina
Take advantage of a compact, production-ready turning solution that combines machining stability and straightforward setup for fast insert changes; the combination of Ø80 mm head diameter and a 90° cutting angle delivers consistent corner turning performance — order via Metav Werkzeuge or consult our specialists for application advice. Corner tool head T128TM — 90° corner turning head, Ø80 mm, for indexable inserts The Corner tool head T128TM is a robust clamping head for turning operations, engineered to accept TPKN 1603–2204 indexable inserts for precision corner cutting on lathes and CNC turning centres. 90° cutting angle for corner turning Designed for TPKN 2204 indexable inserts Ø80 mm head diameter for rigidity 32 mm shank, M8x24 fixing screw Stable machining and consistent corner results The compact head geometry with a 90° cutting angle and Ø80 mm diameter increases stiffness at the cutting zone, which results in improved process stability and reduced chatter during corner turning. The tool head has four cutting edges configured to support repeatable engagement and even wear distribution; such mechanical balance helps to maintain part quality across serial production runs. This design supports efficient material removal where right‑angled cuts or shoulder finishes are required, while the mass of 0.795 kg contributes to vibration damping without compromising toolholder compatibility. Quick clamping and straightforward insert changes Setup and maintenance are kept simple by the exposed fixing arrangement: the head is secured with an M8x24 hex screw and requires a 5 mm Allen key for tightening. The 32 mm shank diameter facilitates secure seating in standard toolholders and reduces changeover time on the shop floor. The overall length of 52 mm allows a compact footprint in tight turret stations; as a result, changeover and re‑indexing procedures are faster, contributing to shorter downtimes and more predictable cycle times during shift work. Built for workshop durability and universal compatibility Designed specifically for TPKN 2204 inserts and listed as compatible with TPKN 1603–2204 insert types, the head fits common insert families used in general turning and finishing tasks. The combination of a substantial head diameter and multiple cutting edges promotes longer service intervals by distributing cutting forces more evenly across the insert seat. The compact form factor makes the component suitable for both conventional lathes and modern CNC turning centres that demand reliable, repeatable tool performance in corner and face turning operations. For application advice or to confirm fitment of Teknik Makina’s corner tool head T128TM with existing tool posts, contact Metav Werkzeuge for tailored support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: T128TM Manufacturer: Teknik Makina Description: for TPKN 1603-2204 indexable inserts Facts Shank diameter: 32 mm Head diameter: 80 mm Cutting angle: 90° Number of cutting edges: 4 Overall length: 52 mm Weight: 0.795 kg Fixing screw: M8x24 Required Allen key: 5 mm Special features Suitable for TPKN 2204 indexable inserts Compatible with TPKN 1603–2204 insert family Four cutting edges for even wear Compact 52 mm overall length Designed for use in lathes and CNC turning centres FAQ How does the head secure the insert and which screw is required? The Corner tool head T128TM secures the insert with an M8x24 fixing screw; tightening is performed with a 5 mm Allen key. Which insert types are compatible with this turning head? This clamping solution is compatible with the TPKN 2204 insert family and supports the TPKN 1603–2204 indexable inserts for right‑angle corner turning. Will the T128TM fit standard toolholders? The T128TM has a 32 mm shank diameter and a 52 mm overall length, designed to fit common toolholders used on lathes and CNC turning centres. How many cutting edges does the head provide and what is the benefit? The head features four cutting edges, which promote even wear distribution and more consistent machining results across serial batches. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Turning Head 90° For APXT 1003 Indexable Inserts, 8 Cutting Edges, 50mm Overall Length - Teknik Makina
Take advantage of a compact, robust turning solution with a 90° cutting angle, compatibility with APKT 1003 indexable inserts and a sturdy 27 mm shank for stable toolholding; order or discuss tooling requirements directly via Metav Werkzeuge for reliable supply and expert advice. Eckmesserkopf T179TM — 90° corner turning head for APKT 1003 inserts by Teknik Makina The Eckmesserkopf T179TM is a compact corner turning head designed for precision external turning and profiling using APKT 1003 indexable inserts, suitable for workshop and production environments 90° cutting angle for precise profiling Compatible with APKT 1003 indexable inserts Fits Korloy APKT 1003 insert geometry 27 mm shank with 80 mm head diameter Engineered rigidity for consistent turning results Built with a focus on stability, the head’s Ø 80 mm diameter and 27 mm shank deliver a rigid connection to the toolpost, reducing vibration and supporting repeatable part geometry. The 90° cutting angle provides predictable engagement for external profiling and square shoulder operations, enabling consistent surface finish and dimensional control. The stated weight of 1.205 kg contributes to mass damping without excessive tool overhang, which helps maintain concentricity and prolong insert life. Fast, secure insert changes minimise downtime Maintenance and index changes are simplified thanks to compatibility with APKT 1003 indexable inserts and a straightforward fastening system. The insert is secured with an M2.5x5.5 Torx screw operated by a T8 key, which allows quick tightening and reliable clamping force for repeatable seating. The Eckmesserkopf T179TM from Teknik Makina supports efficient shopfloor routines: reduced set‑up time and fast insert exchange mean less idle machine time and higher productivity per shift. Practical dimensions and simplified inventory management The head’s 50 mm overall length and compact profile make it suitable for confined setups and multi‑operation fixtures, while the availability for Korloy APKT 1003 inserts reduces the need for specialised spare stocks. With eight cutting edges the configuration supports indexed tool life extension when combined with multi‑edge inserts, and the standardised interface facilitates integration into existing toolholder systems. Clear, measurable data such as shank diameter and head Ø simplify purchasing decisions and ensure interchangeability across compatible toolholders. Contact Metav Werkzeuge for tailored application advice and delivery options for Teknik Makina tooling: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T179TM Manufacturer: Teknik Makina Designation: Eckmesserkopf for APXT 1003 Indexable Inserts Facts Weight: 1.205 kg Head diameter: 80 mm Shank diameter: 27 mm Overall length: 50 mm Cutting angle: 90° Number of cutting edges: 8 Special features Compatible inserts: APKT 1003 Compatible insert brand: Korloy Torx screw: M2.5x5.5 Torx key size: T8 FAQ Which insert type fits this turning head? The Eckmesserkopf T179TM is designed for APKT 1003 indexable inserts; Korloy APKT 1003 geometry is explicitly compatible. How is the insert fastened to the head? Insertion is secured with an M2.5x5.5 Torx screw, tightened using a T8 Torx key for consistent clamping. What are the key dimensions to check for mounting? Relevant dimensions are head Ø 80 mm, shank 27 mm and overall length 50 mm; weight is 1.205 kg. Is the head suitable for 90° profiling and shoulder turning? Yes, the integrated 90° cutting angle is configured for precise profiling and square shoulder operations. Can other insert brands be used with the same geometry? The head accepts inserts matching the APKT 1003 geometry; brands that adhere to that ISO form, such as Korloy, will be compatible. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Turning Head 90° for LNMT 1306 Indexable Inserts M4x10 Torx T15 - Teknik Makina
Take advantage of the 90° cutting geometry and the stable 27 mm shank for reliable corner turning; order the corner turning head directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. Corner Turning Head T230TM — indexable insert holder for LNMT 1306, 90° cutting angle (Teknik Makina) The Corner Turning Head T230TM is a compact tool head engineered for turning operations with LNMT 1306 indexable inserts, offering a combination of accurate corner geometry and robust clamping for workshop environments Compatible with LNMT 1306 inserts (ISCAR) 90° cutting angle for predictable corner geometry 27 mm shank for secure machine mounting 80 mm diameter and 50 mm overall length Predictable cornering for consistent part geometry The 90° cutting geometry delivers a defined cutting direction that reduces the need for secondary finishing and simplifies process planning. By pairing the body with LNMT 1306 indexable inserts, the holder ensures repeatable engagement at the corner, which translates to precision in profile and form tolerances. The design supports consistent chip flow and surface quality, enabling machines to run predictable cycles with fewer interventions. Secure clamping and fast insert handling to improve throughput A robust clamping concept combined with the 27 mm shank improves tool stability and vibration damping during interrupted cuts. Fixing is achieved with an M4x10 Torx screw, tightened using a T15 key, allowing quick and secure insert changes while keeping set-up time to a minimum. The unit’s modest 50 mm length and 80 mm diameter balance accessibility in tight assemblies with sufficient mass for stable operation; the assembly weight of 1.227 kg contributes to reduced chatter and enhanced surface finish. Workshop compatibility and streamlined logistics Compatibility with standard insert contours from established manufacturers ensures broad applicability across turning applications and makes stocking simple. The tool head accepts inserts produced to the LNMT 1306 specification and is listed as ISCAR compatibility, so existing insert inventories can be used without modification. The result is lower tooling complexity on the shop floor and easier procurement planning when replacing or expanding tool sets. Contact Metav Werkzeuge to confirm fitment for specific machines, check stock availability in Emmerich, or request application advice for the Teknik Makina T230TM corner turning head — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: T230TM Manufacturer: Teknik Makina Facts Diameter: 80 mm Shank diameter (d): 27 mm Total length: 50 mm Weight: 1.227 kg Cutting angle: 90° Special features Compatible with LNMT 1306 indexable inserts ISCAR compatibility Torx screw M4x10 Torx key size T15 Number of cutting edges: 9 FAQ Which inserts fit the tool head? The T230TM accepts LNMT 1306 indexable inserts and is compatible with ISCAR-manufactured inserts to that specification. What is the nominal cutting angle? The holder is configured with a 90° cutting angle, ensuring well-defined corner geometry for predictable machining. How is the insert secured? Insert retention uses an M4x10 Torx screw, tightened with a T15 key for secure clamping and straightforward replacement. Is the tool head suitable for tight installations? Yes — the compact overall length of 50 mm and 80 mm diameter make the holder suitable for constrained setups while maintaining rigidity. Which shank diameter is required for mounting? The holder requires a 27 mm shank for proper machine mounting and secure clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Turning Head 90° For R390-1704 Indexable Inserts, M3.5x8.5 Torx Screw - Teknik Makina
Take advantage of a compact, purpose-built 90° turning head that combines precise corner machining with secure clamping and straightforward serviceability; the robust design and compatibility with Sandvik R390-1704 indexable inserts support consistent production results. Order the Teknik Makina tool directly via Metav Werkzeuge or consult the Metav team for application advice. Eckmesserkopf T411TM — 90° turning head for R390-1704 indexable inserts (Teknik Makina) The Eckmesserkopf is a compact 90° turning head for R390-1704 indexable inserts, engineered for accurate corner machining and reliable mounting in demanding turning operations. 90° cutting angle for accurate corner machining Compatible with Sandvik R390-1704 inserts 27 mm shank for secure toolholder mounting Torx M3.5×8.5 screw, T15 key fastening Accurate corner machining with 90° geometry The 90° geometry delivers a predictable tool path for corner and shoulder turning, reducing the need for secondary finishing. The combination of a defined 90° cutting angle and compatibility with R390-1704 indexable inserts ensures consistent contact conditions at the cutting edge, which contributes to repeatable surface quality. For operators unfamiliar with insert design, indexable inserts are replaceable cutting tips that allow fast renewal of cutting edges without regrinding, lowering total tool life costs while maintaining process stability. Stable clamping and straightforward fastening for repeatable results A 27 mm shank provides a rigid connection to the turret or holder, helping to minimise vibration and runout during heavy cuts. The insert is secured with a Torx M3.5×8.5 screw and released with a T15 key, a common fastening standard that simplifies maintenance and tool change procedures in the workshop. The secure clamping arrangement reduces the risk of insert movement under load, improving dimensional accuracy and prolonging insert life. Compact form that supports productivity in tight setups With a head diameter of 80 mm and an overall length of 52 mm, the toolhead is designed for access into constrained bores and close-quartered turned features. The relatively compact profile, combined with a weight of 1.168 kg, balances rigidity with manoeuvrability on the turret. The specification of 7 cutting edges indicates the number of usable cutting positions inherent to the compatible insert family, enabling multiple indexed positions before replacement and supporting continuous production runs. Compatibility, handling and workshop integration The toolhead is specified for use with Sandvik R390-1704 inserts, making it straightforward to source replacements from common industrial suppliers. Mounting requires only a T15 Torx key to remove or clamp the M3.5×8.5 screw, simplifying routine insert changes and minimising downtime. The robust mechanical features mean that the corner turning head integrates readily into established turning processes, offering predictable performance without additional special tool interfaces. Contact Metav Werkzeuge for tailored application guidance on the Teknik Makina T411TM Eckmesserkopf and to confirm compatibility with specific machine turrets — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: T411TM Brand: Teknik Makina Product: Eckmesserkopf For: for R390-1704 Indexable Inserts Torque screw: M3.5×8.5 Torx key: T15 Compatible insert maker: Sandvik Facts Shank diameter: 27 mm Overall length: 52 mm Diameter: 80 mm Weight: 1.168 kg Cutting angle: 90° Cutting edges: 7 Special features Suitable for R390-1704 indexable inserts Torx fastened insert clamping Compact head for tight machining zones SKU: T411TM Brand: Teknik Makina FAQ Which inserts fit this turning head? The turning head accepts R390-1704 indexable inserts; the design is matched to the insert geometry specified for that family. What is the shank diameter for mounting? The shank diameter is 27 mm, providing a rigid fit for standard turret toolholders. How is the insert secured and which key is required? The insert is secured with an M3.5×8.5 Torx screw, removable and tightened using a T15 key for straightforward servicing. What cutting angle does the toolhead provide? The toolhead features a 90° cutting angle, optimised for accurate corner and shoulder turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com