Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
100mm Face Milling Head for SNMU 1305 Indexable Inserts, 45° Cutting Angle, 8 Inserts, M5x12 Screw - Teknik Makina
Take advantage of a robust face milling solution with a 100 mm diameter body, 45° cutting geometry and secure Torx clamping for reliable series production; order via Metav Werkzeuge or consult the advisors for application support. Face milling head for SNMU 1305 indexable inserts — 100 mm diameter, 45° cutting angle | Teknik Makina A Face milling head designed for SNMU 1305 indexable inserts, engineered to provide stable face milling and reproducible surface quality in workshop and industrial applications Stable 100 mm diameter body for consistent performance Compatible with SNMU 1305 indexable inserts 45° cutting geometry for smooth surface finish Secure clamping with M5x12 Torx screws T20 Higher removal rates with controlled cutting forces The robust 100 mm diameter body combined with a 45° cutting geometry enables efficient material removal while keeping cutting forces moderated; this reduces chatter and extends tool life. With eight cutting edges, the head offers extended service intervals and predictable cycle times, which supports continuous production. The additional mass of 1.487 kg gives mechanical stability, improving finish quality when working at higher feed rates and helping to maintain a constant cutting depth across the machined face. Fast and reliable insert changes for minimal downtime Maintenance and insert replacement are simplified by the use of M5x12 Torx screws and a T20 key, ensuring secure clamping and low risk of cam‑out during tightening. The head accepts SNMU 1305 indexable inserts from common suppliers such as ISCAR, allowing flexible sourcing of grade and geometry for specific materials. The clear interface between head and insert reduces the need for special tooling during service, which shortens machine downtime and keeps the production flow efficient. Repeatable set-up and compatibility with standard arbors A compact overall height of 52 mm and a standard 32 mm arbor interface provide straightforward integration into existing tooling setups and turret systems. The measured balance and defined mounting dimensions facilitate repeatable positioning, shortening set‑up time between batches. This consistency lowers the probability of rework and supports tight tolerance production runs where repeatability and interchangeability are essential. Built for workshop reliability and straightforward inventory management The cutter head’s compatibility with a widely used insert format simplifies inventory and tool management, while the clear technical specification supports predictable procurement and planning. Supplied by a recognised tooling source, the component contributes to a dependable tooling chain and aligns with a workshop strategy that values availability and proven performance. For operations aiming to consolidate suppliers, the head pairs well with established industrial inserts and routine maintenance practices. Contact Metav Werkzeuge today to discuss the Teknik Cutting Tools face milling head (SKU T237TM) and confirm the optimal SNMU 1305 configuration for the intended machining tasks; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T237TM Name: Face milling head for SNMU 1305 indexable inserts Manufacturer: Teknik Makina Dimensions & weight Diameter: 100 mm Overall height: 52 mm Arbor diameter: 32 mm Weight: 1.487 kg Cutting angle: 45° Number of cutting edges: 8 Features Compatible with SNMU 1305 indexable inserts Suitable for inserts from ISCAR Torx screws M5x12 Torx key T20 ECLASS: 21180902 Files: 64e8a0e77cf48d9e17c0d1df, 64e8a12911e3b4da1987f08a FAQ Which insert type is required for this head? The head is designed for SNMU 1305 indexable inserts; grades and geometries from ISCAR are compatible depending on the workpiece material. What arbor size is needed to mount the head? Mounting requires a 32 mm arbor interface as specified for the unit. How many cutting edges does the head provide? The cutter head carries eight cutting edges, enabling longer intervals between insert changes. Which screw and key are used for clamping? Clamping uses M5x12 Torx screws tightened with a T20 key to ensure secure fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head For XNMX 0606 Indexable Inserts L63mm With Internal Coolant - Teknik Makina
Take advantage of a robust machining solution that combines a 100 mm cutting diameter, integrated coolant delivery and compatibility with XNMX 0606 indexable inserts for reliable face milling. Benefit from reduced changeover time thanks to Torx fastenings and a compact 63 mm overall length — order via Metav Werkzeuge or contact their consultants for application advice. Planing cutter head T738TM — 100 mm diameter with internal coolant, for XNMX 0606 indexable inserts (Teknik Makina) A Planing cutter head T738TM engineered for efficient face milling in production and toolroom environments; compatible with Korloy XNMX 0606 indexable inserts for flexible cutting strategies. 100 mm diameter for broad milling coverage Internal coolant for improved chip evacuation Compatible with XNMX 0606 indexable inserts Ten cutting edges for extended tool life Consistent accuracy and stable cutting performance The design centres on delivering repeatable results in face milling. With a 100 mm diameter and 10 cutting edges, the head provides a large effective cutting circle and balanced load distribution, which reduces vibration and improves surface finish. The 51° cutting angle is configured to offer a compromise between high material removal and fine finish, enabling steady productivity on medium-duty operations. The compact 63 mm overall length enhances rigidity at the spindle, supporting tighter tolerances in serial production. Direct coolant supply to the cutting zone for longer life An internal coolant channel feeds cutting fluid directly to the insert tips, promoting efficient chip evacuation and local cooling at the cutting interface. This reduces thermal stress on both the tool and the workpiece, allowing for more consistent cutting parameters and extended insert life. Compatibility with Korloy XNMX 0606 indexable inserts means standardised stocking and straightforward upgrades to coated grades for aluminium, steel or mixed-material machining, without modifying the tool body. Fast insert changes and shop-floor practicality Maintenance is simplified by the use of Torx fastenings: Torx T15 key access and M4×12.5 screws make insert replacement rapid and repeatable, cutting unproductive downtime. The indexable insert format employed by the head makes multiple cutting edges available from a single insert, reducing consumable costs and inventory complexity. Designed for machining shops, maintenance departments and light production lines, the cutter head supports straightforward integration into existing tool systems and setup routines. For application-specific recommendations, stock availability from Metav Werkzeuge’s Emmerich warehouse, or to arrange a technical consultation on cutting parameters and insert selection, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 — their specialists will advise on the best configuration for the task at hand Technical data Article number: T738TM Product type: Planing cutter head Manufacturer: Teknik Makina SKU: T738TM Facts Diameter: 100 mm Overall length: 63 mm Cutting edges: 10 Cutting angle: 51° Screw size: M4×12.5 Special features Internal coolant For XNMX 0606 indexable inserts Compatible with Korloy inserts Torx T15 fastenings FAQ What insert type fits this cutter head? The cutter head accepts XNMX 0606 indexable inserts; compatible inserts from Korloy can be used for a range of materials. Is the tool suitable for high-speed machining? The internal coolant supply in the T738TM supports higher cutting speeds by improving heat control and chip evacuation during elevated-speed operations. How are the inserts secured and changed? Inserts are clamped with Torx screws (require a Torx T15 key); the screws are M4×12.5, enabling quick and repeatable changes on the shop floor. Which applications are recommended for this cutter head? The head is intended for face milling, finishing and light roughing in general machining, toolrooms and production lines where standard XNMX 0606 inserts are preferred. What are the main benefits of the internal coolant feature? Internal coolant delivers lubricant and coolant directly to the cutting edge, reducing temperatures, improving chip flow and extending insert life for more consistent production. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Face Milling Head ONMU 0505 Indexable Inserts L52mm Internal Coolant - Teknik Makina
Take advantage of a robust combination of high removal rates and precise finish thanks to the 100 mm face milling geometry and internal coolant: a durable choice for reliable production. Order directly via Metav Werkzeuge or contact our consultants for application advice. Planmesserkopf T798-1TM – 100 mm face milling head with internal coolant (Teknik Makina) A Planmesserkopf T798-1TM engineered for efficient face milling using ONMU 0505 indexable inserts, suited to medium- to heavy-duty finishing operations. 100 mm diameter for broad face milling Internal coolant for improved chip evacuation Holds ONMU 0505 indexable inserts (ISCAR) Eight cutters, 45° cutting angle for smooth finish High-efficiency material removal with consistent surface quality The face milling head delivers a measurable gain in throughput by combining a 100 mm diameter with a 45° cutting angle, which reduces cutting forces and promotes a steadier chip flow. The design with 8 cutting edges enables distributed cutting load and extended tool life, translating to fewer toolchanges and reduced machine downtime. For shops aiming to balance cycle time and surface finish, the cutter body’s geometry ensures predictable behaviour across a range of medium-hard materials, making the assembly an effective option for batch and continuous operations. Coolant-through design for secure tool performance The internal coolant channel supports directed coolant delivery at the cutting zone, improving chip evacuation and heat control at the insert rake face. This targeted coolant supply reduces recutting of chips and helps maintain stable cutting temperatures, which is especially beneficial during prolonged cuts or when machining alloys that require thermal control. The result is a more consistent surface quality and prolonged insert lifetime, with the mechanical connection secured by M5x12 Torx screws tightened with a T20 key for straightforward maintenance. Compatibility and practical handling for production use Configured for ONMU 0505 indexable inserts and compatible with ISCAR-type inserts, the head offers flexibility in insert choice to match specific material and finish requirements. The compact profile with a 52 mm overall length and mass of 1.842 kg keeps the assembly stable while remaining easy to install on suitable arbor interfaces. The robust mounting and symmetrical cutter arrangement simplify balancing and contribute to reliable runout performance in milling setups. Application guidance and measurable benefits When applied to typical face-milling tasks, the head’s combination of diameter, cutter count and coolant feed leads to measurable productivity benefits: higher material removal rates with improved surface integrity and fewer rejected parts. The construction supports consistent tool-change intervals and easier process standardisation across several machines, thereby supporting cost-efficiency and reproducible part quality in industrial and subcontracting environments. For product availability, technical compatibility checks or tailored advice on the Teknik Makina face milling head T798-1TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss application details and supply options. Technical data Article number: T798-1TM Product type: Planmesserkopf Brand: Teknik Makina Numbers / Core technical data Diameter: 100 mm Overall length: 52 mm Weight: 1.842 kg Cutting edges: 8 Cutting angle: 45° Torx key: T20 Torx screw: M5x12 Special features Internal coolant For ONMU 0505 indexable inserts Compatible inserts manufacturer: ISCAR SKU: T798-1TM FAQ What inserts fit this face milling head? The head is designed for ONMU 0505 indexable inserts and is compatible with inserts from ISCAR, enabling selection of grades and geometries to suit the workpiece material. Is the coolant routed through the tool body? Yes, the unit features internal coolant, which directs coolant to the cutting zone for improved chip evacuation and temperature control. How many cutters does the head accept and what is the cutting angle? The body carries 8 cutting edges and is set up with a 45° cutting angle to balance cutting forces and surface finish. What are the key dimensions and weight for machine setup? Key setup values are: 100 mm diameter, 52 mm overall length, and a mass of 1.842 kg, relevant for balancing and toolholder selection. Which fasteners are used for insert clamping? Inserts are secured with M5x12 Torx screws requiring a T20 key for tightening and removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head SNKX 1206 L52mm With Internal Coolant, 45° Cutter Angle - Teknik Makina
Take advantage of the combination of reliable chip evacuation, stable cutting geometry and straightforward insert service for smooth face-milling performance — order the head directly via Metav Werkzeuge or contact our consultants for specification support. Face milling head T330-1TM for SNKX 1206 indexable inserts — Teknik Makina, 100 mm with internal coolant The face milling head is designed for efficient face-milling with SNKX 1206 indexable inserts and offers internal coolant for improved tool life and surface consistency. Internal coolant for optimised cooling 100 mm diameter for robust material removal Compatible with SNKX 1206 Korloy inserts Eight cutting edges for steady cutting Improved thermal control for longer insert life The integrated internal coolant channel directs cutting fluid precisely to the cutting zone, which reduces heat build-up and assists chip evacuation. This targeted cooling lowers thermal wear on the cutting edges and helps to maintain a consistent cutting geometry under extended cycles, so insert life is extended and production uptime is increased. The coolant-through design is especially beneficial when machining demanding materials, because the cooling effect is delivered where it matters most, improving both tool performance and component surface quality. Consistent surface finish through balanced geometry A diameter of 100 mm combined with 8 cutting edges and a 45° cutting angle provides a favourable balance between material removal and radial forces. The oblique cutting geometry reduces vibration and distributes cutting forces more evenly, which supports a uniform surface finish and dimensionally stable results. The specified max cutting diameter 113 mm and the overall length of 52 mm contribute to a compact tool projection, which further minimises deflection and supports repeatable accuracy in typical face-milling applications. Fast insert changes and secure assembly for production workflows Designed for assembly with M4x12.5 screws and a Torx T15 fit, the holder enables quick and repeatable insert replacement using standard workshop tools. The SNKX 1206-compatible pockets accept Korloy inserts and are arranged to allow straightforward indexing, reducing downtime during maintenance. The head, referenced as T330-1TM, is engineered for integration into existing toolholders and clamping systems, helping to keep tool logistics simple and predictable for machine shops and production lines. For robust, production-ready face milling choose Teknik Makina’s T330-1TM — contact Metav Werkzeuge in Emmerich for expert advice and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T330-1TM Product: Face milling head (Planmesserkopf) Manufacturer: Teknik Makina Label: 100mm Planmesserkopf SNKX 1206 L52mm with internal coolant SKU: T330-1TM Facts Diameter: 100 mm Max cutting diameter: 113 mm Overall length: 52 mm Number of cutting edges: 8 Weight: 1.926 kg Cutting angle: 45° Torx key: T15 Torx screw: M4x12.5 ECLASS: 21181015 Special features Internal coolant: yes Compatible with SNKX 1206 indexable inserts Compatible insert manufacturer: Korloy Product category: Face milling head Application: Face milling / planing operations FAQ What inserts fit this face milling head? The face milling head accepts SNKX 1206 indexable inserts; Korloy inserts in this designation are compatible with the pocket geometry. Does the head supply coolant to the cutting zone? Yes — the T330-1TM is equipped with internal coolant, which delivers fluid directly to the cutting edges to improve cooling and chip evacuation. What is the cutting angle and how does it affect machining? The head uses a 45° cutting angle, which reduces axial cutting forces and promotes smoother surface finishes while helping to control vibration during face milling. Which fastening hardware is required for insert clamping? Insert clamping is performed with M4x12.5 screws tightened using a Torx T15 key, enabling secure and repeatable mounting of the SNKX 1206 inserts. Is the T330-1TM suitable for heavy-duty removal? With a 100 mm diameter, 8 cutting edges and a compact projection, the T330-1TM is intended for robust face-milling tasks where stability and sustained cutting performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head SNMX 1206 L50mm With Internal Coolant, 8 Teeth, 88° Cutting Angle - Teknik Makina
Take advantage of a compact, performance-oriented solution with 100 mm diameter and internal coolant for reliable face milling. The combination of a short 50 mm overall length and eight cutting edges ensures stable cutting and reduced downtime. Order the face milling head directly via Metav Werkzeuge or consult our advisors for specification matching. Face milling head T346-1TM — 100 mm, internal coolant (Teknik Makina) Face milling head T346-1TM for SNMX 1206 indexable inserts, engineered for productive face milling and quick insert changes in industrial workshops. 100 mm diameter for wide coverage Internal coolant to the insert seats Compatible with SNMX 1206 Korloy inserts Eight cutting edges for continuous cutting Engineered for consistent face milling performance The compact 100 mm diameter cutter body delivers a balanced mix of accessibility and material removal rate, enabling efficient face machining across multiple setups. Built to accept SNMX 1206 indexable inserts, the toolhead provides reliable cutting geometry with an 88° cutting angle, which supports near-flat surface generation and predictable chip flow. The short 50 mm overall length contributes to rigidity, reducing vibration and enhancing surface finish without sacrificing accessibility in constrained fixtures. Internal coolant that extends insert life and consistency Equipped with internal coolant, the head feeds coolant close to the cutting edge to improve cooling and aid chip evacuation. This targeted coolant supply helps maintain cutting-edge stability under load, contributing to longer insert life and fewer unplanned changeovers. For operations that prioritise throughput, the coolant feature reduces thermal variation at the cutting zone and supports consistent cycle times across batch production. Fast insert changes and secure fastening for production shops The modular design accepts SNMX 1206 inserts from the listed supplier and relies on standard fastenings for quick maintenance: the head uses M4x12.5 Torx screws secured with a T15 key. The arrangement minimises downtime during regripping or insert replacement and ensures repeatable seating of the inserts. With eight cutting edges distributed around the body, one indexed tool change can restore cutting capability rapidly, supporting tight production schedules. Practical benefits for workshop and production environments This machining head is suited to repetitive face milling tasks where reliability and quick serviceability matter. The compact construction and internal coolant lower the risk of thermal distortion, while compatibility with widely available SNMX 1206 inserts simplifies tooling logistics. The overall design supports a predictable production flow, helping to reduce the number of tool variants required on the shop floor and streamlining maintenance routines. For robust, coolant-fed face milling from Teknik Makina, contact Metav Werkzeuge to order the T346-1TM or to request application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T346-1TM Label: 100 mm face milling head SNMX 1206 L50 mm with internal coolant Product type: Face milling head Manufacturer: Teknik Makina Facts Diameter: 100 mm Total length: 50 mm Weight: 1.688 kg Cutting edges: 8 Cutting angle: 88° Special features Internal coolant: yes Compatible inserts: SNMX 1206 (Korloy) Fastening screw: M4x12.5 Torx key: T15 FAQ Which indexable inserts are compatible with this milling head? The face milling head accepts SNMX 1206 indexable inserts; compatibility is confirmed for Korloy inserts and standard SNMX 1206 geometries. Is there coolant delivery to the cutting edge? Yes, the T346-1TM features internal coolant to improve cooling and chip evacuation at the insert seats. How many cutting edges does the tool provide and what is the cutting angle? The tool body offers eight cutting edges and an 88° cutting angle for near-flat face milling and sustained cutting engagement. Which screws and key are required for insert fastening? Insert retention uses M4x12.5 Torx screws tightened with a T15 Torx key for secure and repeatable seating. What are the main dimensions and the weight of the head? The head has a 100 mm diameter, a 50 mm total length and a mass of 1.688 kg, designed for a compact and rigid setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Turning Tool Holder For ADMT 1204 Indexable Inserts 90° Cutting Angle, M3x7 Torx - Teknik Makina
Combine stable mounting and broad compatibility with a 90° cutting angle and a 32 mm shank for consistent corner turning performance; the robust Torx M3x7 fastening and eight cutting edges support quick tool changes and reliable repeatability. Order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed Corner turning head T220TM — 90° cutting angle, for ADMT 1204 indexable inserts (Teknik Makina) Corner turning head T220TM designed for precise external corner turning and finishing operations on lathes and turning centres 90° cutting angle for precise corner turning Compatible with ADMT 1204 indexable inserts 32 mm shank diameter for secure mounting Torx M3x7 fastening with T8 key for quick changes Precise cutting geometry for consistent component quality The corner turning head delivers repeatable results through its defined 90° cutting angle and compact geometry. A defined cutting angle simplifies set-up and reduces adjustment time, which in turn improves process stability for batch and single-part production. The slightly massed construction (approx. 1.595 kg) contributes to vibration damping during cuts, so finishing runs show fewer tool marks and more predictable tool life. This combination of defined geometry and mass supports a measurable increase in process reliability and surface quality. Rapid insert changes and dependable clamping for less downtime Designed for ADMT 1204 indexable inserts, the turning head accepts standard insert formats to ease stock and logistics management. The clamping uses a Torx M3x7 screw tightened with a T8 key, enabling secure retention and straightforward exchange during shift work. With eight effective cutting edges on the insert, the system extends time between maintenance intervals and reduces overall tooling consumption. These features translate into shorter set-up times and a lower cost-per-part in routine turning applications. Easy integration and workshop compatibility for flexible machining With a 32 mm shank diameter and a head diameter of 100 mm, the toolholder integrates cleanly into established toolposts and turret systems; the compact 52 mm overall length allows close clearance where space is limited. Compatibility with Walter-type indexable inserts supports supply chain flexibility and replacement simplicity. Supplied material and mounting specifications make the head a practical choice for workshops seeking to standardise tooling without sacrificing performance. Metav’s European distribution from Emmerich ensures straightforward procurement and dependable supply when scaling up production. Contact Metav Werkzeuge for specific batch quantities or integration advice on the T220TM corner turning head — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical guidance and delivery from Emmerich Technical data SKU: T220TM Name: Eckmesserkopf (corner turning head) Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Head diameter: 100 mm Overall length: 52 mm Cutting edges: 8 Cutting angle: 90° Weight: 1.595 kg Compatible inserts: ADMT 1204 Special features Torx screw: M3x7 Torx key size: T8 Compatible with Walter indexable inserts Brand: Teknik Makina FAQ Is this head compatible with ADMT 1204 inserts? Yes. The corner turning head T220TM is designed specifically for ADMT 1204 indexable inserts and clamps them securely for external corner turning. What shank diameter is required for mounting? The holder requires a 32 mm shank mounting interface; the shank diameter is listed as 32 mm in the technical data. How many usable cutting edges are available per insert? The design supports inserts with a total of eight cutting edges, extending time between changes and reducing tooling costs. Which screw and key are used for the insert clamp? The insert is secured with a Torx M3x7 screw and adjusted using a T8 Torx key for fast and reliable clamping. Is the tool suitable for close‑quarter machining where space is limited? Yes. With an overall length of 52 mm and a head diameter of 100 mm, the holder is compact enough for tight clearances while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Indexable Corner Cutter 90° For APMT 1604 Inserts, 8 Cutting Edges, 32mm Shank - Teknik Makina
Take advantage of the robust combination of rigidity and fast indexable insert changes: the head delivers stable shoulder milling with a 90° cutting angle and accepts APMT 1604 indexable inserts for reliable chip control. Order directly via Metav Werkzeuge or ask the consultants for application matching. Teknik Makina corner milling head »T249TM« — 90° cutting geometry, 100 mm diameter A compact industrial corner milling head designed for shoulder and face milling operations using APMT 1604 indexable inserts Robust 90° cutting head geometry 100 mm diameter for stable cutting Accepts APMT 1604 indexable inserts M4x10 Torx fixing with T15 key Higher process stability through rigid head design The head’s 100 mm body diameter and solid mounting ensure increased stiffness during heavy cuts, which results in more consistent tolerances and improved surface finish. The 90° cutting angle is optimised for shoulder milling, allowing efficient material removal on vertical faces without requiring complex tool paths. For production environments, the reduced chatter and steady chip evacuation translate into measurable cycle-time improvements and fewer reworks, supporting a predictable machining process. Fast insert changes and secure clamping for less downtime Designed for standard APMT 1604 indexable inserts, the tool uses a M4x10 Torx screw and a T15 key for secure fixing; this combination provides quick and repeatable insert changes while maintaining clamping reliability. The tool’s 32 mm mounting diameter and 52 mm overall length give a compact footprint ideal for tight-tooling setups. Explaining the terms: an indexable insert is a replaceable cutting plate that can be rotated or replaced when one edge wears, so downtime is limited to a brief screw change rather than a full-tool regrind. Clear application fit and benefits for workshop workflows Supply-chain-friendly compatibility with common insert makers, for example Korloy, simplifies procurement and inventory. With eight cutting edges, the head distributes wear and enables consistent performance across repetitive operations. For small-batch manufacturers and larger CNC shops alike, the result is dependable milling performance with low setup complexity — supporting the move to more efficient and scalable production processes. Contact Metav Werkzeuge for tailored application advice and supply from our Emmerich warehouse — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T249TM Manufacturer: Teknik Makina Product name: Eckmesserkopf for APMT 1604 Indexable Inserts SKU: T249TM Facts Diameter: 100 mm Mounting diameter: 32 mm Overall length: 52 mm Cutting angle: 90° Cutting edges: 8 Weight: 1.53 kg Special features Compatible with APMT 1604 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 FAQ Which insert type fits this head? The head accepts APMT 1604 indexable inserts; compatibility with inserts from Korloy is indicated for the Teknik Makina corner milling head (SKU T249TM). What clamping hardware is supplied or required? Clamping is achieved with a M4x10 Torx screw tightened using a T15 key; the mechanism provides secure and repeatable insert retention for the Teknik Makina tool. What is the recommended application for the tool? The tool is designed for shoulder and face milling where a 90° cutting angle is required, offering stable cutting on vertical faces and efficient chip control. What mounting diameter is needed on the machine spindle or arbor? A 32 mm mounting diameter is required; this compact interface supports rigid fixation while minimising overhang. How many cutting edges are available before replacement? The tool is configured with 8 cutting edges in its typical use pattern, enabling balanced wear distribution and predictable tool-change intervals. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Indexable Corner Turning Head for TPKN 1603-2204 Indexable Inserts, 90° Cutting Angle, M8x24 Locking Screw - Teknik Makina
Benefit from a robust 90° indexable angle head with a 32 mm shank and quick-lock M8x24 fastening for stable, repeatable corner turning; order the Indexable Angle Head T106TM directly via Metav Werkzeuge or consult our specialists if application advice is required Indexable Angle Head T106TM — 90° for TPKN 1603-2204 by Teknik Makina A Indexable Angle Head (T106TM) designed for angular turning and finishing operations with TPKN 1603‑2204 indexable inserts 90° cutting angle for precise corner work Compatible with TPKN 1603‑2204 indexable inserts 32 mm shank diameter for stable clamping M8x24 locking screw and M4x10 hex screw Improve process reliability with stable clamping and balance The angle head is engineered to increase machine uptime by combining a compact geometry with stable clamping. The 32 mm shank diameter ensures secure seating in standard toolholders, reducing vibration and runout during corner turning operations. With a managed mass of 0.961 kg, the unit keeps inertial loads low while delivering consistent contact between insert and workpiece. These design choices translate into measurable improvements in surface finish and repeatability, making the component suitable for both serial production and precision workshop tasks. Faster insert changes and safe fixation for reduced setup time Changeovers are simplified by the straightforward clamping concept and accessible fastenings. The head accepts TPKN 1603-2204 indexable inserts and is secured with a M8x24 locking screw plus an M4x10 hex screw for the insert clamp. The supplied clamp plate TA012 and the specified Allen key (size 5) make maintenance predictable and fast, limiting downtime. Clear mechanical interfaces reduce the chance of incorrect seating and allow operators to complete insert replacements and minor adjustments with confidence. Consistent corner accuracy and machining quality A true 90° cutting angle gives the head a defined geometry for finishing and profiling tasks where right-angle contact is required. The construction supports 5 cutting edges and a nominal tool diameter of 100 mm, while the overall compact length of 52 mm assists access in confined fixtures. By focusing on a restrained, purpose-built geometry, the toolholder achieves consistent contact conditions that aid in achieving target tolerances and surface specifications, particularly when working on components that require precise shoulder or groove definition. Workshop-ready compatibility and dependable performance Manufactured by Teknik Makina, the head integrates with common turning setups and is suitable wherever robust angle machining is needed. Its combination of precision build and practical fastening elements helps shops streamline tooling inventories — one compact head to match a range of indexable insert grades. The result is predictable machining behaviour, lower scrap rates and a smoother production flow when the head is paired with correctly specified inserts and stable fixturing. For application advice or to secure supply from our Emmerich distribution, contact Metav Werkzeuge — specialists are available at info@metav-werkzeuge.com or on +49 2822 7131930 to recommend the right setup for Teknik Makina angle heads Technical Data Article number: T106TM Manufacturer: Teknik Makina Product: Indexable Angle Head (Eckmesserkopf) For indexable inserts: TPKN 1603-2204 Clamp plate: TA012 Facts Shank diameter: 32 mm Weight: 0.961 kg Overall length: 52 mm Diameter: 100 mm Cutting angle: 90° Number of cutting edges: 5 Special features Locking screw: M8x24 Hex screw: M4x10 Allen key size: 5 Suitable for TPKN 1603 family inserts SKU: T106TM FAQ Which indexable inserts fit this angle head? The T106TM is designed for TPKN 1603‑2204 indexable inserts; these insert types provide standard seating and reliable cutting geometry for corner turning applications. What is the shank diameter and how does it affect clamping? The shank diameter is 32 mm, offering a secure fit in matching toolholders and contributing to reduced vibration and improved runout stability. Which fastenings are used to secure the insert and clamp plate? Insert fixation uses an M8x24 locking screw with an M4x10 hex screw for the clamp; the clamp plate is specified as TA012, and a size 5 Allen key is recommended for assembly. Is the head suitable for finishing work at right angles? Yes — the dedicated 90° cutting geometry provides predictable contact and is optimised for finishing and shoulder profiling where accurate right-angle machining is required. How heavy is the unit and what are installation considerations? The head weighs 0.961 kg, a manageable mass that helps keep spindle loads moderate; ensure the receiving toolholder matches the 32 mm shank diameter and that clamping surfaces are clean for best performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Indexable Face Mill For RPMW 1204 Inserts, 7 Teeth, 32mm Shank - Teknik Makina
Take advantage of precise cutting performance, secure clamping and fast insert changes thanks to the Ø100 mm cutter body, seven cutting edges and a 32 mm shank. Order the indexable face mill directly via Metav Werkzeuge or ask our consultants if needed. Indexable face mill T714TM – Ø100 mm, 7 cutting edges, for RPMW 1204 inserts by Teknik Makina The Indexable face mill T714TM is a robust cutter for high-volume milling tasks, engineered to accept RPMW 1204 indexable inserts for flexible tool life and cost-efficient regrinding. Ø100 mm cutting diameter Seven cutting edges for steady stock removal 32 mm tool shank for secure clamping Compatible with RPMW 1204 Korloy inserts Consistent material removal for uninterrupted production The design concentrates on continuous productivity by combining a Ø100 mm cutter body with 7 cutting edges, which balances material removal and surface quality. The arrangement of the cutting edges reduces chatter and distributes load across the cutter body, supporting stable performance in both face and peripheral milling. When fitted with the appropriate RPMW 1204 insert grades, the tool enables predictable cycle times and repeatable results that integrate well into automated tool paths and standard production setups. Secure clamping and quicker maintenance reduce downtime A 32 mm tool shank and robust fixing elements ensure reliable clamping in tool holders, while the use of Torx fastening delivers positive torque control. The assembly uses T15 drive keys and M4x7 screws for repeatable insert retention, simplifying routine maintenance. The combination of secure fixing and standardised screws shortens tool-change intervals and minimises the time required for topping up cutter capacity, which benefits workshop teams aiming to keep machine uptime high. Flexible compatibility with standard RPMW 1204 inserts Engineered specifically for RPMW 1204 indexable inserts, the cutter body accepts a wide range of grades and geometries from established suppliers such as Korloy, allowing selection of the insert best suited to the workpiece material and machining strategy. Indexable inserts provide the advantage of renewing only the cutting edge rather than replacing the whole tool body, which reduces tooling costs and simplifies inventory management for production planners and purchasing departments. Integration into workshop supply and operational practice Supplied through Metav, this milling cutter fits into a broader concept of dependable workshop provisioning. The combination of proven mechanical design and established insert compatibility supports straightforward spare-part planning and consistent reorders from a single supplier. For operations seeking both performance and supply security, the configuration reduces procurement complexity while maintaining the benefits of indexable tooling: cost control, quick recovery from wear and straightforward stock management. Contact Metav Werkzeuge today to arrange the optimal RPMW 1204 insert grade and secure immediate delivery from Emmerich for seamless integration into production. Technical Data Article number: T714TM Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 100 mm Overall height: 53 mm Cutting edges: 7 Shank diameter: 32 mm Design / Special features For RPMW 1204 Indexable Inserts Compatible with Korloy RPMW 1204 inserts Torx screw: M4x7 Torx key size: T15 FAQ Which insert type is required for this cutter? The cutter accepts RPMW 1204 indexable inserts; Korloy grades are a direct fit and recommended where those grades match the application. How many cutting edges are fitted to the cutter body? The tool is equipped for seven cutting edges, which provides a balance between material removal rate and surface integrity. What shank diameter is specified for clamping? The cutter features a 32 mm shank diameter for secure mounting in standard tool holders. Which fasteners are used to secure the inserts? Insert retention uses M4x7 screws with a T15 Torx drive to ensure consistent torque and simple maintenance. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Indexable Turning Head For TPKN 1603-2204 Indexable Inserts 90° Cutting Angle, 6 Cutting Edges, M6x17 Fixing - Teknik Makina
Combining a 90° cutting angle with a 32 mm mounting interface delivers stable, repeatable corner turning for medium‑duty lathe operations. The unit’s compatibility with TPKN 1603–2204 indexable inserts and its six cutting edges reduce tool change frequency and support consistent cycle times — order the corner turning head directly via Metav Werkzeuge or consult our advisors for integration advice. Corner Turning Head T124TM — 90° cutting angle, 32 mm mounting (Teknik Cutting Tools) The corner turning head T124TM is a compact indexable‑insert tool head for precise corner and profiling operations using TPKN 1603–2204 inserts 90° cutting angle for precise corner turning Fits TPKN 1603–2204 indexable inserts 32 mm mounting diameter for rigid clamping Six cutting edges for longer service intervals Robust 1.542 kg construction for stability Precision and repeatability for accurate corner turning A right‑angled tool geometry ensures predictable chip flow and consistent part radii; the 90° cutting angle provides a defined cutting direction that simplifies setup and reduces adjustment effort. Paired with the 32 mm mounting diameter, the head delivers low vibration and high repeatability on typical turning centres. For shops replacing multiple insert systems, the clear compatibility with TPKN 1603–2204 indexable inserts helps standardise tooling and shortens tool‑change routines, improving overall process control. Secure clamping and straightforward insert changes Clamping is secured via an M6x17 hex screw tightened with a 4 mm Allen key, allowing fast, reliable insert seating without complex fixtures. The head accommodates six cutting edges, extending the interval between indexing or insert replacement and lowering downtime. With a mass of 1.542 kg, the assembly offers beneficial inertia for steady cuts while remaining manageable for manual tool changes and quick adjustments at the machine. Built for workshop throughput and integration The unit’s compact footprint — a nominal 100 mm diameter and 52 mm overall length — suits a range of turning and profiling tasks where accessibility and tool overhang are constrained. Designed as an indexable‑insert holder, the head supports rapid insert swaps and predictable tool life, which aids production planning and reduces unproductive machine time. Specification clarity and straightforward mounting make it well suited to maintenance‑friendly workshop environments that prioritise uptime and consistent part quality. For procurement guidance or to discuss fitting the Teknik Cutting Tools corner turning head T124TM into existing tool setups, contact Metav Werkzeuge for expert advice and dependable supply from Emmerich. Technical Data Article number: T124TM Name: Corner turning head for TPKN 1603–2204 indexable inserts Manufacturer: Teknik Makina Facts Mounting diameter: 32 mm Diameter: 100 mm Overall length: 52 mm Weight: 1.542 kg Cutting angle: 90° Cutting edges: 6 Screw: M6x17 Allen key: 4 mm Special features Compatible with TPKN 1603–2204 indexable inserts Compact design for limited overhangs Six‑edge indexing for extended run times FAQ What inserts fit this tool head? The corner turning head T124TM is designed for TPKN 1603–2204 indexable inserts, ensuring correct seating and alignment for those insert geometries. Which toolholder interface is required? The head requires a 32 mm mounting interface; ensure the machine turret or holder accepts a 32 mm shank for secure fitting. What fastening hardware is used for clamping? Clamping is with an M6x17 hex screw tightened using a 4 mm Allen key, as supplied in the technical specification for T124TM. How does the head support productivity? By supporting six cutting edges and standard TPKN inserts, the head reduces insert changes and offers predictable indexing intervals to maintain steady cycle times. Is the component heavy to handle during setup? At 1.542 kg, the unit is engineered to balance stability during cutting with manageable handling during setup and insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Planing Cutter Head for SNKX 1606 and ONHX 0606 Indexable Inserts, 45° Cutting Angle, 7 Inserts, 32mm Bore - Teknik Makina
Take advantage of a robust, Palbit-compatible head with a 100 mm diameter and 7 cutting edges to improve cycle times and reduce setup interruptions; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. Planing cutter head T631TM — 100 mm diameter, 7 cutting edges — Teknik Makina The Planing cutter head T631TM is a precision tooling head for machining with SNKX 1606 and ONHX 0606 indexable inserts, designed for reliable face-planing and finishing in industrial workshops 100 mm diameter for wide coverage Seven cutting edges for steady material removal 32 mm mounting bore for secure attachment Compatible with SNKX 1606 and ONHX 0606 Compatibility that simplifies tooling choices and stock management This cutter head is built around proven insert standards: it accepts SNKX 1606 and ONHX 0606 indexable inserts, including Palbit variants. That standardisation means tooling lists and spare-part inventories can be consolidated, lowering logistical complexity. By selecting a head that matches widely used insert geometries, workshop planners and production engineers gain predictable cutting behaviour and simplified reordering. The modular concept of indexable inserts also reduces downtime, as worn edges are replaced instead of replacing entire cutters. Secure clamping and straightforward assembly for predictable set-up times The design includes a 32 mm mounting bore and is secured with a M5x12 Torx screw (Torx key T20), providing a compact and reliable attachment to compatible arbors. The combination of a defined bore and standard fasteners supports repeatable seating and easier balancing, which helps maintain tool life and surface quality. Weight and dimensions are optimised for rigid support while remaining manageable during tool changes, contributing to shorter setup intervals and fewer interruptions on batch or single-piece production runs. Geometry that balances cutting efficiency with surface quality A 45° cutting angle and 7 cutting edges deliver a compromise between aggressive metal removal and a refined finish. The larger 100 mm diameter spreads engagement over multiple inserts, reducing the load per edge and smoothing power draw during cutting. For less technical audiences: the 45° angle means the cutter slices material with a flatter bite, lowering vibration and improving the finished surface. This geometry is particularly useful where consistent planing results are required without excessive feed adjustment. Workshop-friendly serviceability and insert handling Maintenance is reduced owing to the use of indexable inserts and standard fastening. The head accepts OEM Palbit styles and alternative ONHX 0606 types, enabling quick swaps and predictable tool life depending on the chosen insert grade. Replacement of the inserts and torqueing of the M5x12 screws with a T20 key are straightforward tasks in any equipped workshop. For production environments seeking to streamline processes, this approach translates into lower tooling consumption and easier skills transfer between operators. For procurement or application guidance on the Teknik Makina Planing cutter head T631TM—particularly regarding Palbit-compatible inserts—contact Metav Werkzeuge for direct ordering and expert consultation: call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: T631TM Manufacturer: Teknik Makina ECLASS: 21181015 Numbers Diameter: 100 mm Weight: 2.75 kg Bore (mounting): 32 mm Cutting angle: 45° Cutting edges: 7 Overall length: 63 mm Compatibility & features For SNKX 1606 and ONHX 0606 indexable inserts Compatible with Palbit inserts Torx screw: M5x12 Torx key size: T20 FAQ Which inserts fit this cutter head? The cutter head accepts SNKX 1606 and ONHX 0606 indexable inserts; Palbit variants are compatible and commonly recommended for this head. What mounting size is required for installation? Mounting requires a 32 mm bore; the head is fastened with a M5x12 Torx screw and tightened with a T20 key for secure attachment. How does the 45° geometry affect machining? A 45° cutting angle reduces cutting forces and vibration versus steeper angles, helping the head produce a smoother finish while maintaining effective material removal. Can inserts be replaced quickly during production? Yes; the design uses indexable inserts so worn edges are replaced rather than the entire head, enabling fast tool changes and minimal machine downtime. Is this head suitable for both roughing and finishing operations? The combination of 7 cutting edges and the 45° geometry offers a balance that can be used across roughing and finishing applications, depending on insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Planing Cutter Head for WNMX 09T3 Indexable Inserts, 7 Cutting Edges, 32mm Mount - Teknik Makina
Efficient face milling guaranteed by a 100 mm cutter diameter, compatibility with WNMX 09T3 indexable inserts and a sturdy 32 mm arbour — combine high material removal and simple insert handling. Order the Planmesserkopf directly via Metav Werkzeuge or consult our specialists for application advice. Planmesserkopf T671-2TM – face milling head, 100 mm diameter, for WNMX 09T3 (Teknik Cutting Tools) The Planmesserkopf is a purpose-built face milling head for high-efficiency machining with WNMX 09T3 indexable inserts, suited to industrial and workshop environments where predictable removal rates and fast tool changes are required 100 mm cutter diameter Compatible with WNMX 09T3 indexable inserts 7 cutting edges for high material removal 32 mm arbour with Torx T8 clamping screw M3x7 Maximise throughput with stable cutting performance This face milling head is engineered to convert spindle power into consistent metal removal: the 100 mm diameter and 7 cutting edges allow larger contact area per revolution and fewer passes for planar operations. The resulting benefit is measurable cycle-time reduction and improved cost-efficiency on serial jobs. Where roughing meets finishing, the design supports controlled chip evacuation and sustained cutting forces, preserving tool life and process repeatability. Precise fit and simple insert changes to reduce downtime The cutter accepts WNMX 09T3 standard inserts and is specified for Korloy geometries, which keeps insert inventory standardised across many workshops. The 32 mm arbour ensures secure mounting and concentric rotation, while the Torx T8 drive and M3x7 clamping screws permit straightforward, torque-controlled insert replacement. These features translate into shorter maintenance intervals and less machine downtime, enabling faster return to production after tool service. Robust construction for dependable workshop performance A compact overall length and balanced mass deliver stable running at typical milling speeds. With a weight of 1.627 kg and a 50 mm overall length, the head offers a low moment of inertia for steady operation and reduced spindle load. The geometry has been chosen to provide precision and resistance to vibration during heavy cuts; the result is repeatable surface quality and extended insert life. For shops looking to simplify tooling without sacrificing performance, this milling head reduces the number of dedicated holders required. For machining projects requiring reliable face milling performance from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for precise product matching and local supply; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: T671-2TM Product name: Planmesserkopf Manufacturer: Teknik Makina ECLASS: 21181015 Core technical data Diameter: 100 mm Overall length: 50 mm Arbour bore: 32 mm Weight: 1.627 kg Cutting edges: 7 Compatibility & fastening For inserts: WNMX 09T3 Compatible insert manufacturer: Korloy Torx key: T8 Clamping screw: M3x7 FAQ Which insert type fits this head? The Planmesserkopf T671-2TM is designed for WNMX 09T3 indexable inserts and is compatible with Korloy standard geometries. What arbour size is required? A 32 mm arbour bore is specified for this cutter head, providing a secure fit for standard arbour mounting systems. How many cutting edges are provided on the head? The head is configured with 7 cutting edges, enabling efficient material removal and balanced cutting forces. What screw and driver are used for insert clamping? Insert clamping uses an M3x7 screw secured with a Torx T8 driver for reliable and repeatable fastening. Is this head suitable for both roughing and finishing operations? Yes, the geometry and multiple cutting edges make the head suitable for heavy material removal and controlled finishing passes when appropriate inserts are used. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Planing Face Cutter Head For SPKN 1203 Indexable Inserts, 75° Cutting Angle, 8 Teeth, 32mm Shank - Teknik Makina
Take advantage of a robust face milling solution combining efficient indexable-insert use, secure 32 mm toolholder mounting and a compact 100 mm cutter body for stable, high-productivity facing operations; order via Metav Werkzeuge or consult our specialists for application support. Face milling head T154TM – 100 mm diameter, for SPKN 1203 indexable inserts (Teknik Makina) The Face milling head T154TM is a compact cutter head engineered for facing operations with SPKN 1203 indexable inserts, offering a secure 32 mm toolholder interface and a design optimised for reliable insert clamping and repeatable performance. 100 mm diameter for broad face milling Compatible with SPKN 1203 inserts 32 mm shank for secure mounting Faster material removal with consistent surface quality Equipped to accept eight indexable inserts, this face milling head concentrates cutting capacity into a compact package that increases throughput on repetitive facing tasks. The combination of a 100 mm cutter body and 8 cutting edges reduces the number of passes required on large faces, which translates into shorter cycle times and improved machine utilisation. The 75° cutting angle moderates cutting forces and helps maintain a stable contact pattern, lowering vibration and supporting a consistent surface finish across the workpiece. Secure mounting and maintenance for uninterrupted production A robust 32 mm shank diameter provides secure clamping in standard toolholders, while the M8x24-L clamping screw system ensures reliable seat pressure for each insert pocket. Routine service is simplified by using a 5 mm Allen key, allowing fast insert changes and torque-controlled re-tightening. The assembly’s total mass of 1.698 kg contributes to steady rotational inertia without excessive load on the spindle, balancing rigidity and ease of handling during set-up and tool change operations. Designed for predictable, repeatable results in workshops The head’s geometry, tailored for SPKN 1203 inserts, delivers predictable cutting behaviour suited to production environments where repeatability is essential. With a 55 mm overall length and a compact form factor, the cutter integrates well on machines with limited working envelope while still offering broad face coverage. The design emphasises longevity of the clamping system and straightforward replacement of consumables, so maintenance intervals are minimised and uptime is maximised. Practical benefits for procurement and process planning Selecting this milling head supports efficient inventory management by standardising on a common insert type and a universally understood shank interface. The T154TM’s measurable characteristics — diameter, shank size, weight and cut angle — provide a clear basis for tool team decisions and process sheets, enabling confident integration into existing tool sets and NC programmes without guessing or rework. Choose Teknik Makina’s proven face milling head and contact Metav Werkzeuge for tailored specification advice and reliable supply direct from Emmerich. Technical data SKU: T154TM Name: Planmesserkopf (face milling head) Manufacturer: Teknik Makina EClass: 21180902 Facts Diameter: 100 mm Cutting angle: 75° Cutting edges: 8 Shank diameter (aufnahme): 32 mm Overall length: 55 mm Weight: 1.698 kg Features For SPKN 1203 indexable inserts Clamping screw: M8x24-L Allen key: 5 mm Compact body suited to constrained work envelopes FAQ Which inserts are compatible with this cutter head? The cutter head accepts SPKN 1203 indexable inserts; the pocket geometry and clamping system are designed for secure seating of that insert type. What toolholder size is required for mounting? Mounting requires a toolholder that accepts a 32 mm shank; the 32 mm interface provides stable clamping and proper alignment for the cutter. How many inserts does the head use and what is the benefit? The head is configured for 8 cutting edges, which increases material removal per revolution and helps reduce machining time for facing operations. Which tool is required for insert changes and screw tightening? Insert changes and clamping-screw tightening are performed using a 5 mm Allen key together with the M8x24-L clamping screw specified for the head. Is the head suitable for machines with limited working space? Yes; with an overall length of 55 mm and a compact 100 mm body, the head is suited for machines where installation space is restricted while still providing broad face coverage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Planing Tool Head For PNMU 1206 Indexable Inserts, 10 Cutting Edges - Teknik Makina
Product data conflict detected: the specification contains inconsistent information regarding compatible indexable inserts. The record lists compatibility with both PNMU 1206 and PNMU 1006 inserts, which cannot be reconciled without confirmation. Because insert designation determines seat geometry, cutter diameter fit and clamping arrangement, this discrepancy prevents the generation of a reliable, industry-accurate product description and technical guidance. Please verify which insert series is correct and confirm any related mounting details (insert size, seat type and clamping screw specification) so that a precise face milling head specification and application text can be produced. Once the correct insert designation is provided, a complete product description tailored to machining requirements and suitable toolholders will be issued.
100mm Planing Tool Head For WNMX 1305 Indexable Inserts, 6 Cutting Edges, 32mm Shank - Teknik Makina
Benefit from a stable, high-output solution thanks to the combination of a Ø 100 mm face diameter, 6 cutting edges and a 32 mm shank for secure clamping and steady material removal; order the component directly via Metav Werkzeuge or contact our consultants for application advice. Face milling head T689TM – Ø 100 mm, for WNMX 1305 indexable inserts (Teknik Makina) Face milling head T689TM designed for efficient face milling using WNMX 1305 indexable inserts from Korloy, suitable for workshop and production environments where predictable results and fast insert changes are required Ø 100 mm face milling diameter Six cutting edges for uniform stock removal 32 mm tool holder shank diameter Compatible with WNMX 1305 Korloy inserts Stable cutting performance for consistent faces The face milling head is engineered to deliver steady material removal across the entire contact area. With a Ø 100 mm cutter diameter and 6 cutting edges, the tool head spreads cutting forces and reduces load per insert, which contributes to an even surface finish and predictable cycle times. The 32 mm shank provides a solid connection to the tool holder, improving rigidity and reducing vibrations during operation, which supports reproducible results on repeat jobs. Fast insert changes and straightforward maintenance Compatibility with WNMX 1305 indexable inserts and the KRLY insert style allows the use of industry-standard parts for rapid replacement. The insert mounting uses a Torx T15 drive and M4x10 screws, permitting quick, tool-assisted changes that cut downtime. Indexable inserts are pre-ground cutting tips that are simply clamped into position, meaning that a worn tip can be replaced without regrinding the whole tool, so throughput is maintained and shop-floor availability improves. Compact geometry and workshop integration The head’s overall height 50 mm and concentrated geometry enable installation in many common milling set-ups without requiring extensive fixture changes. The balanced design supports stable operation within typical machining envelopes while the use of standard fastening elements simplifies spare-part handling. Routine checks are limited to insert condition and screw torque; with correct tightening of the M4x10 screws using a T15 key, clamping security and repeatability are assured. For complex applications or specific holder compatibility, technical advice is available from Metav’s consultants. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina face milling heads and to discuss availability of the T689TM; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: T689TM Manufacturer: Teknik Makina Name: Face milling head for WNMX 1305 Facts Diameter: 100 mm Overall height: 50 mm Cutting edges: 6 Shank diameter: 32 mm Special features For WNMX 1305 indexable inserts Compatible insert type: KRLY Torx key: T15 Torx screw: M4x10 Brand: Teknik Makina FAQ Which inserts fit this milling head? The face milling head T689TM is made for WNMX 1305 indexable inserts; the specification cites compatibility with the KRLY insert style from Korloy. What is the shank diameter for clamping? The tool features a 32 mm shank diameter for tool holder mounting. How many cutting edges does the head provide? The cutter is equipped with 6 cutting edges, which helps to distribute cutting forces and produces an even face finish. What fastening system is used for the inserts? Inserts are secured with M4x10 screws that are driven with a Torx T15, enabling quick, reliable insert changes. Who manufactures the T689TM and where can further technical details be obtained? The T689TM is supplied by Teknik Makina; for additional technical information or application support, Metav Werkzeuge can provide consultancy and parts sourcing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Planmesserkopf L52mm 7 Schneiden Innenkühlung Torx M5x12 T20 - Teknik Makina
Planmesserkopf – Planmesserkopf für präzise Planbearbeitung Planmesserkopf zur effizienten Planbearbeitung in der Zerspanung mit Innenkühlung und sieben Schneiden für konstant saubere Oberflächen Präziser Schnittwinkel 43° für feine Planflächen Sieben Schneiden erhöhen Spanleistung und Produktivität Innenkühlung integriert zur Standzeitverlängerung Montage mit Torx Schraube M5x12 und T20 Torx Schlüssel Ø100 mm und Gesamtlänge 52 mm für kompakte Einbausituationen Produktivität steigern durch optimierte Schneidengeometrie Der Planmesserkopf wurde für wirtschaftliche Planbearbeitung entwickelt und kombiniert 7 Schneiden mit einem Schnittwinkel 43°, um Material schnell und mit gleichmäßigem Spanabtrag zu bearbeiten. Die Kombination aus hoher Schneidanzahl und optimiertem Winkel reduziert Umlaufzeiten und verbessert die Oberflächengüte, sodass Rüstzyklen kürzer werden und die Bearbeitungsleistung pro Schicht steigt. Diese Auslegung ist besonders vorteilhaft bei großen Flächen, wo reproduzierbare Planitätswerte gefragt sind. Längere Standzeit durch integrierte Innenkühlung Dank der Innenkühlung wird Kühlmittel direkt an die Schnittzone geführt, was die Wärmeentwicklung reduziert und die Lebensdauer der Schneiden verlängert. Niedrigere Schnitttemperaturen vermindern Verschleiß und senken die Gefahr von Werkzeugbrüchen, wodurch Ausfallzeiten im Fertigungsprozess abnehmen. Für Anwender ohne aufwändige Nachbearbeitung bedeutet das weniger Werkzeugwechsel und eine verbesserte Prozessstabilität. Schnelle Montage und sichere Befestigung Die Befestigung erfolgt über eine Torx Schraube M5x12, montierbar mit dem Torx Schlüssel T20, was einen schnellen und spielfreien Zusammenbau gewährleistet. Diese bewährte Verbindung reduziert Montagefehler und ermöglicht zügige Wechsel von Schneidplatten, sofern solche eingesetzt werden. Das klare Schraubbild erleichtert zudem regelmäßige Kontrollen und Nachjustierungen an der Maschine. Passgenau für industrielle Fertigungsplätze und Beratung vor Ort Mit einem Durchmesser Ø100 mm und einer Gesamtlänge 52 mm passt der Planmesserkopf in kompakte Spannsysteme und ermöglicht vielseitige Einsatzfälle in mittelständischen Fertigungen. Metav Werkzeuge liefert die Komponenten aus dem Lager in Emmerich und unterstützt bei technischen Fragen. Metav steht für Demokratisierung der Präzision: transparent, zuverlässig und mit über 48.000 zufriedenen Kunden, die auf konstante Qualität setzen. Bei Unklarheiten zu Einbaumaßen oder Maschinenkompatibilität hilft das Team gern weiter. Empfehlung: Metav Werkzeuge empfiehlt den Einsatz des Planmesserkopfes von Teknik Makina für produktive Planbearbeitung; Anfragen und Bestellwünsche über info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: T212-1TM Marke: Teknik Makina Produkttyp: Planmesserkopf Fakten Durchmesser: 100 mm Gesamtlänge: 52 mm Aufnahme Ø: 32 mm Schneidanzahl: 7 Schnittwinkel: 43° Gewicht: 1,765 kg Besonderheiten Innenkühlung: ja (integrierte Kühlmittelzufuhr) Torx Schlüssel: T20 (für Montage) Torx Schraube: M5x12 Schneiden: 7 FAQ Wie viele Schneiden hat der Planmesserkopf und welchen Vorteil bringt das? Der Planmesserkopf von Teknik Makina verfügt über sieben Schneiden; diese hohe Schneidanzahl erhöht die Spanabnahme pro Umdrehung und sorgt für konstante Oberflächen, wodurch die Produktivität steigt. Ist eine Innenkühlung vorhanden und wie wirkt sie? Ja, der Planmesserkopf besitzt eine integrierte Innenkühlung, die das Kühlmittel direkt an die Schnittzone führt, Wärme reduziert und so die Standzeit der Schneiden verlängert. Welche Befestigungsart wird verwendet und welches Werkzeug wird benötigt? Die Befestigung erfolgt mit einer Torx Schraube M5x12; zum Anziehen wird ein Torx Schlüssel T20 empfohlen, was einen schnellen und sicheren Wechsel ermöglicht. Für welche Aufnahmen ist der Planmesserkopf geeignet? Der Planmesserkopf hat eine Aufnahme Ø32 mm und einen Durchmesser von 100 mm, wodurch er sich für kompakte Spannsysteme in der Serienfertigung eignet. Welche Rolle spielt der Schnittwinkel von 43°? Der Schnittwinkel von 43° sorgt für einen effizienten Spanabtrag und eine verbesserte Oberflächenqualität, insbesondere bei ebenen Planflächen und großflächigen Zerspanungsaufgaben. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Planmesserkopf LNMX 1004 L56mm mit Innenkühlung, Torx M4x10 - Teknik Makina
Planmesserkopf Planmesserkopf für LNMX 1004 Wendeplatten Der Planmesserkopf für LNMX 1004 Wendeplatten unterstützt planseitige Schlicht- und Schruppbearbeitung an großen Werkstückflächen und ist ausgelegt für stabile, prozesssichere Zerspanungseinsätze Innenkühlung für bessere Spanabfuhr und Kühlung 100 mm Durchmesser für breite Planflächen 11 Schneiden für hohe Materialabtragung Schnittwinkel 90° für präzise Planlagen Passend für LNMX 1004 Wendeplatten von Korloy Innenkühlung sorgt für konstante Schnittbedingungen Die integrierte Innenkühlung leitet Kühlschmierstoff direkt an die Schneidzone und reduziert dadurch Wärmeentwicklung sowie Verschleiß. Das Ergebnis ist eine stabilere Schnittzone und längere Standzeit der Wendeschneidplatten. Besonders bei hochvolumigen Planbearbeitungen unterstützt die gezielte Kühlung die Spanabfuhr und verbessert die Oberflächenqualität bei gleichbleibender Bearbeitungsleistung. Hohe Schneidzahl und kompakte Bauform für effiziente Planbearbeitung Mit einem Durchmesser von 100 mm und 11 Schneiden bietet dieser Kopf eine hohe Auflagefläche für Wendeschneidplatten, was produktive Schnitte und gleichmäßige Materialabträge ermöglicht. Der Schnittwinkel 90° sorgt für exakte Planlagen, während die kompakte Gesamtlänge von 56 mm den Einsatz an geringen Bauteilradien erlaubt. Anwender profitieren so von gleichmäßigem Verschleißverhalten und stabilen Bearbeitungsergebnissen. Sichere Befestigung und einfacher Plattenwechsel Die Wendeschneidplatten werden mit einer Torx Schraube M4x10 fixiert; der mitgeführte Torx Schlüssel T15 ermöglicht exakten Anzug und schnellen Wechsel. Das Befestigungskonzept reduziert Nacharbeit durch lose Platten und vereinfacht die Wartung. Hinweise zur richtigen Anzugsmomentierung und zum routinemäßigen Prüfen der Schraubenqualität tragen zusätzlich zur Prozesssicherheit bei. Empfehlung: Der Planmesserkopf von Teknik Makina ist ideal für die Bearbeitung mit LNMX 1004 Wendeplatten von Korloy – für zuverlässige Planbearbeitung und maximale Standzeiten; bei technischen Fragen berät Metav Werkzeuge gern persönlich und liefert direkt aus Emmerich. Produktmerkmale Artikelnummer: T509TM Hersteller: Teknik Makina Bezeichnung: Planmesserkopf für LNMX 1004 Wendeplatten Produktart: Planmesserkopf Fakten Durchmesser: 100 mm Gesamtlänge: 56 mm Aufnahme Durchmesser: 32 mm Schneiden: 11 Schnittwinkel: 90 ° Gewicht: 1.48 kg Besonderheiten Innenkühlung: Kühlmittelführung direkt zur Schneide Passend für Wendeplatten: LNMX 1004 Passend für Wendeplatten Hersteller: Korloy (geeignet für Korloy LNMX 1004) Torx Schlüssel: T15 (Torx-Profil) Torx Schraube: M4x10 (Gewindegröße) FAQ Welche Wendeschneidplatten passen in diesen Planmesserkopf? Der Planmesserkopf von Teknik Makina ist ausgelegt für LNMX 1004 Wendeschneidplatten; die Bauform und Befestigungsaufnahme unterstützen die standardisierten Abmessungen dieser Plattengeneration. Ist eine Innenkühlung vorhanden und wie wirkt sie sich aus? Ja, der Planmesserkopf verfügt über eine aktive Innenkühlung, die den Kühlschmierstoff direkt an die Schneide führt und so Wärme reduziert sowie Spanabfuhr verbessert. Welche Schrauben und Werkzeuge werden für den Plattenwechsel benötigt? Für den Plattenwechsel wird eine Torx Schraube M4x10 verwendet; empfohlenes Werkzeug ist ein Torx Schlüssel T15 für das sichere Anziehen. Für welche Anwendungen eignet sich der Planmesserkopf T509TM besonders? Der Planmesserkopf T509TM von Teknik Makina eignet sich besonders für großflächige Planbearbeitung und Schlichtoperationen, wo konstante Oberflächenqualität und kurze Stillstandszeiten gefordert sind. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Round Cutter For RDMT 12T3 Indexable Inserts 7 Teeth, 32mm Shank - Teknik Makina
Take advantage of a robust combination of process stability and straightforward maintenance: the T287TM is compatible with RDMT 12T3 indexable inserts and features a 100 mm diameter with seven cutting edges for balanced cutting. Order the cutter directly via Metav Werkzeuge or request technical advice from the consultants. Indexable face mill T287TM — 100 mm diameter, for RDMT 12T3 inserts (Teknik Makina) Indexable face mill T287TM designed for reliable face milling in workshop and production environments with RDMT 12T3 indexable inserts Compatible with RDMT 12T3 indexable inserts 100 mm diameter for effective face milling 7 cutting edges for balanced cutting 32 mm shank for high rigidity Increased machining stability through a rigid design The T287TM face mill is engineered for stable operation: the 32 mm shank and a well‑balanced mass (approx. 1.402 kg) reduce vibration and support repeatable results. A cutter with a 100 mm diameter and seven cutting edges distributes cutting forces across multiple engagement points, which lowers tool load per insert and helps to maintain a consistent machining rhythm. For production planners this translates into more predictable cycle times and fewer surface defects compared with single‑edge solutions. Faster tooling changes and predictable service routines Designed for indexable tooling concepts, the milling head accepts RDMT 12T3 inserts, enabling fast blades replacement and reduced process downtime. Insert retention uses M3.5 fixing hardware and the fixing screw is M3.5x8.5, loosened and tightened with a T15 Torx key for quick, repeatable clamping. The modular approach means worn geometry is resolved by inserting fresh cutting inserts rather than regrinding, which simplifies inventory management and lowers life‑cycle tooling cost. Consistent surface finishes and reduced rework The multiple‑edge arrangement improves chip division and promotes even wear across the insert set, supporting a consistent surface finish and minimised need for secondary operations. The cutter head’s geometry is set to achieve balanced engagement with each indexable insert, which reduces the risk of chatter in common face‑milling tasks. For operations where component quality and throughput matter, this approach delivers measurable process efficiency. Suitable for workshop and light industrial production With an overall length of 50 mm and compact dimensions, the milling head integrates easily into standard arbors and toolholders that accept a 32 mm shaft. The specification is suitable for general face‑milling applications where RDMT 12T3 inserts are already in use, making the T287TM a practical choice for jobbing shops and production lines alike. The robust construction supports frequent index changes and straightforward handling during setup. Contact Metav Werkzeuge for availability and tailored tooling recommendations for the T287TM indexable face mill; technical consultants at Metav Werkzeuge are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: T287TM Manufacturer: Teknik Makina Designation: Indexable face mill for RDMT 12T3 inserts Facts Diameter: 100 mm Cutting edges: 7 Overall length: 50 mm Shank diameter: 32 mm Weight: 1.402 kg ECLASS: 21180902 ETIM: EC011860 Special features Compatible with RDMT 12T3 indexable inserts Torx screw: M3.5 Torx screw (fixing): M3.5x8.5 Torx key: T15 SKU: T287TM FAQ Which inserts are compatible with this cutter? The T287TM is designed for use with RDMT 12T3 indexable inserts; compatibility is specified to enable fast insert changes and straightforward re‑stocking. What are the main dimensions of the milling head? The cutter has a 100 mm diameter, 50 mm overall length and a 32 mm shank diameter, listed to support correct toolholder selection. How many cutting edges does the tool use and what is the benefit? The head accepts 7 cutting edges in total; this distribution reduces individual insert load and contributes to a steadier cutting action and improved surface consistency. Which screws and key are required for insert changes? Insert retention uses M3.5 fixing screws, the fixing screw is M3.5x8.5, and a T15 Torx key is specified for reliable clamping. Is this cutter suitable for production environments? Yes — the T287TM is designed for workshop and light production use where indexable insert systems and consistent throughput are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Round Cutter for RNHX 1204 Indexable Inserts 8 Cutting Edges, M4x10 - Teknik Makina
Take advantage of the combination of robust cutting capacity, precise clamping and simple serviceability to keep production moving with minimal downtime; order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Rundplattenfräser T664TM — face mill for RNHX 1204 indexable inserts, Ø100 mm, 8 cutters (Teknik Makina) The Rundplattenfräser T664TM is a purpose-built face mill intended for medium- to heavy-duty machining, offering a stable platform for high-volume material removal with RNHX 1204 indexable inserts. Ø100 mm cutting diameter 8 cutting edges for fast material removal 32 mm shank for rigid clamping Compatible with RNHX 1204 indexable inserts Higher throughput through optimised cutter geometry The combination of a Ø100 mm cutting diameter and 8 cutting edges means each revolution removes more material while distributing cutting forces across multiple inserts. This results in shorter cycle times and fewer interruptions for tool changes. The cutter body has been designed to support steady chip flow and consistent engagement, which improves process stability on both castings and machined cast-iron components. In practical terms, shops experience fewer tool-change cycles per shift and a more predictable production rhythm, which supports tight delivery schedules. Secure clamping and straightforward insert replacement A 32 mm shank allows for rigid, vibration-reducing clamping in standard toolholders, improving surface quality and extending insert life. Clamping and insert fixation rely on Torx M4x10 screws and a T15 key, providing a familiar and repeatable method for secure retention. Because the tool accepts RNHX 1204 indexable inserts, there is flexibility in selecting grades and geometries from established suppliers such as Palbit, enabling optimisation for steel, alloyed materials or mixed-batch production without altering the cutter body. Robust construction for consistent surface finish The solid construction and balanced layout of this cutter support steady cutting conditions, which translates into a more uniform surface finish and reduced rework. The mass and form of the body — at approximately 1.57 kg — help dampen high-frequency vibrations that can otherwise mar component finish. For operations where repeatability matters, such as series production or finishing passes prior to heat treatment, the stability of the cutter helps maintain tolerances and reduces the need for corrective grinding or polishing. Integration into workshop workflows and maintenance benefits Designed with practical serviceability in mind, the cutter keeps downtime low: insert changes are fast, and standard Torx fastening ensures that the tool can be serviced with common workshop equipment. The compatibility with standard RNHX 1204 inserts supports stocked consumables and easier supplier sourcing. For teams planning toolpaths, the predictable engagement profile simplifies feed and speed calculation and aids CAM programming, while the cutter’s straightforward interface with conventional toolholders speeds up bench-to-machine transitions. For tailored advice on integrating the Teknik Makina T664TM into a production cell or for specification matching, contact Metav Werkzeuge for a pragmatic recommendation and application support Technical Data Article number: T664TM Manufacturer: Teknik Makina Brand: Teknik Makina Facts Diameter: 100 mm Overall height: 50 mm Shank diameter (D): 32 mm Number of cutting edges: 8 Weight: 1.57 kg Special features Compatible with RNHX 1204 indexable inserts Torx screw: M4x10 Torx key: T15 Suitable insert supplier: Palbit FAQ Which inserts fit this face mill? The Rundplattenfräser T664TM accepts RNHX 1204 indexable inserts; compatible grades from Palbit and similar suppliers can be used depending on the workpiece material. What shank diameter is required for clamping? The cutter features a 32 mm shank diameter, requiring toolholders or adaptors rated for a 32 mm shank for secure clamping. How many cutting edges does the tool provide? The Teknik Makina T664TM has 8 cutting edges, which helps to increase material removal rates and distribute cutting loads. What fastening hardware is used for inserts? Inserts are secured with Torx M4x10 screws; a T15 key is the correct tool for tightening and replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Round Insert Cutter For RDMT 1604 Indexable Inserts 7 Teeth, 32mm Arbor - Teknik Makina
The combination of a Ø100 mm cutting diameter, 7 cutting edges and secure Torx fastening ensures efficient material removal with predictable tool life; order the milling cutter via Metav Werkzeuge or consult the technical team for application‑specific recommendations. Round Insert Milling Cutter T275TM — Ø100 mm, 7 cutting edges, for RDMT 1604 | Teknik Makina The Round Insert Milling Cutter T275TM is a compact indexable cutter designed for face milling applications using RDMT 1604 inserts, offering high stability for medium‑duty production tasks. Ø100 mm cutting diameter 7 cutting edges for smooth material removal Compatible with RDMT 1604 indexable inserts 32 mm tool shank; robust clamping Higher productivity through distributed cutting load With a Ø100 mm diameter and 7 cutting edges, the tool distributes cutting forces across multiple teeth, which reduces feed‑per‑tooth and can increase surface quality while maintaining cycle time. The multiple‑edge configuration supports consistent chip formation and reduces shock to the spindle; this is particularly beneficial when machining interrupted cuts or variable stock. The result is improved process reliability and fewer unexpected tool changes, which supports steady production flow. Fast insert changes and secure clamping for less downtime The cutter is specified for RDMT 1604 indexable inserts and uses a combination of fasteners for secure retention: a locking screw M4x10, Torx screws M4.5x11, and an upper plate BSP010. Insert replacement is performed with a T20 Torx key, enabling safe and repeatable seating of the insert pocket. This mechanical arrangement prevents micro‑movement under load and simplifies maintenance, so insert changes are quick and predictable without specialised equipment. Machine integration and predictable handling Designed with a 32 mm tool shank and an overall length of 52 mm, the cutter fits holders that accept a 32 mm connection and offers a compact envelope for tight setups. The assembled tool weight of 1.37 kg provides a sensible balance between rigidity and handling convenience. These dimensional facts make the tool straightforward to programme into CAM systems and easy to balance for moderate spindle speeds, helping to keep vibration low and surface finishes consistent. Discuss the T275TM from Teknik Makina with Metav Werkzeuge for tailored tooling advice and assured supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T275TM Manufacturer: Teknik Makina Product: Round insert milling cutter for RDMT 1604 indexable inserts ECLASS: 21180902 ETIM: EC011860 Core dimensions & weights Diameter: 100 mm Number of cutting edges: 7 Overall length: 52 mm Shank diameter: 32 mm Weight: 1.37 kg Features & components Compatible inserts: RDMT 1604 Locking screw: M4x10 Torx screw: M4.5x11 Torx key: T20 Upper plate: BSP010 FAQ Which indexable inserts fit this cutter? The T275TM from Teknik Makina is specified for RDMT 1604 indexable inserts; the insert geometry and grade will determine final application suitability. What is the effective cutting diameter and number of teeth? The tool has an effective cutting diameter of 100 mm and is equipped with 7 cutting edges, which supports even load distribution and stable chip formation. How are the inserts secured in the cutter? Inserts are retained with Torx screws M4.5x11 plus a locking screw M4x10 and an upper plate BSP010; a T20 Torx key is used for secure and repeatable seating. What machine interface is required for the toolholder? The cutter is designed for holders accepting a 32 mm shank diameter, so a compatible 32 mm receiver or adapter is required for correct mounting. What are the main dimensions and weight to consider for setup? Key values for the T275TM are: diameter 100 mm, overall length 52 mm, shank 32 mm, and weight 1.37 kg, which should be entered into the balancing and CAM setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Round Insert Milling Cutter for RCKT 1204 Indexable Inserts, 7 Teeth, 32mm Bore - Teknik Makina
Take advantage of a precise combination of robust mounting and reliable insert compatibility for steady production results; the cutter’s Ø100 mm diameter and 7 cutting edges deliver consistent material removal and long tool life. Order directly via Metav Werkzeuge or consult the team for application advice. Indexable face mill T466TM — Ø100 mm, 7 cutting edges (Teknik Makina) The Indexable face mill T466TM is a heavy‑duty face milling cutter designed for use with RCKT 1204 indexable inserts, suited to facing and light finishing tasks in general machining and production environments Compatible with RCKT 1204 indexable inserts (Sandvik) Ø100 mm cutter with 7 cutting edges 32 mm arbor connection with Torx fixing Overall length 52 mm, weight 1.608 kg Consistent productivity through optimised cutter geometry The design focuses on reliable, repeatable removal rates: a Ø100 mm cutter diameter combined with 7 cutting edges reduces vibrations and distributes cutting forces evenly, which supports higher feed rates and smoother passes. In practice, this means shorter cycle times and fewer interruptions for edge changes. The round cutting body and balanced layout are engineered to maintain stable contact during axial and radial engagement, translating into uniform chip evacuation and predictable tool life for series production. Fast, secure fixing and straightforward insert replacement Assembly and insert changes are simplified with a solid 32 mm arbor connection and a Torx clamping system. The cutter uses M3.5x8.5 Torx screws and a T15 key size for quick, repeatable fastening; this reduces downtime during index changes and maintenance. The compatibility with RCKT 1204 inserts—commonly stocked by major manufacturers such as Sandvik—ensures access to a wide range of grades and edge geometries, allowing adaptation to steel and general workpiece materials without extensive tooling swaps. Stability and surface quality for workshop requirements Mass and form contribute to the cutter’s stability: an overall length of 52 mm and a mass of 1.608 kg help dampen chatter during operation, improving surface finish and dimensional consistency. The arrangement of multiple cutting edges distributes wear and enables smoother transitions between teeth, which reduces the need for frequent regrinds or early replacement. This combination of precision and robust construction supports both single‑piece setups and batch processing where surface integrity and repeatability matter. Workshop integration, supply reliability and practical support The tool is intended for straightforward integration into standard milling spindles with a 32 mm arbor interface and is compatible with widely available RCKT 1204 indexable inserts. For procurement and spare parts, Metav Werkzeuge acts as a logistics and quality gateway for the European market, offering rapid order processing from Emmerich and access to technical advice. Technical sheets and mounting instructions are available on request, enabling a quick validation of fit and cutting parameters for workshop planners and purchasing professionals. Contact Metav Werkzeuge for tailored advice on cutter selection, insert grades and order options — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: T466TM Manufacturer: Teknik Makina Product name: Indexable face mill for RCKT 1204 indexable inserts Dimensions & weight Diameter: 100 mm Number of cutting edges: 7 Overall length: 52 mm Arbor connection: 32 mm Weight: 1.608 kg Features & compatibility Compatible inserts: RCKT 1204 Compatible insert manufacturer: Sandvik Torx screw: M3.5x8.5 Torx key size: T15 Intended use: face milling and finishing with indexable inserts FAQ Which insert type fits this face mill? The Indexable face mill T466TM accepts RCKT 1204 indexable inserts; this compatibility allows the use of common grades from suppliers such as Sandvik. What arbor size is required for mounting? A 32 mm arbor connection is specified for the cutter; the clamping system is designed for secure mounting with Torx screws. How many cutting edges are active on the cutter? The cutter has 7 cutting edges, arranged to provide balanced cutting action and improved surface quality. Is the Torx screw and key included? The cutter uses M3.5x8.5 Torx screws and a T15 key for clamping; check the delivery contents at order, as supply packages can vary. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Round Insert Milling Cutter for RDMT 1003 Indexable Inserts, 7 Teeth, M3.5 Clamp Screw - Teknik Makina
Take advantage of a 100 mm diameter cutter built for reliable face milling, compatibility with RDMT 1003 indexable inserts and a 32 mm shank for stable mounting; combine high removal rates with straightforward insert changes. Order the T295TM directly via Metav Werkzeuge or ask our consultants if needed. T295TM round insert face mill — Ø100 mm, for RDMT 1003 indexable inserts (Teknik Makina) The T295TM round insert face mill is designed as a compact, robust milling head for productive face milling operations with RDMT 1003 indexable inserts. For RDMT 1003 indexable inserts 100 mm diameter for broad surface milling Seven cutting edges for consistent stock removal 32 mm shank for secure toolholder interface Consistent metal removal with round insert technology This milling head is optimised for stable, repeatable face milling where even material removal is essential. The round insert concept with RDMT 1003 geometry distributes cutting forces evenly, which reduces vibration and enables a consistent chip load across passes. Indexable inserts mean the cutting edge is renewed quickly without regrinding the tool body, so setup time is minimised and cycle times are improved. For production environments focused on throughput, the combination of a 100 mm diameter and seven cutting edges supports higher metal removal rates while maintaining surface quality. Secure clamping and service-friendly fastenings Tool retention and maintenance are engineered for workshop efficiency. The cutter is secured with a M3.5 locking screw and supplied Torx fasteners (M3.5x8.5) tightened with a T15 key, which simplifies insert changes and torque control during service intervals. The 32 mm shank offers a rigid interface for modern toolholders and reduces run-out risk, while the measured mass of 1.463 kg contributes to a balanced rotational behaviour. Clear fastening standards make it straightforward to document assembly and torque procedures for quality assurance in serial production. Adaptable milling head for predictable process stability The cutter body allows straightforward integration into standard milling setups and is intended for applications where reliable repeatability is required. With multiple cutting edges distributed around the perimeter, cutting loads are reduced per edge, which can extend insert life and enable smoother feed rates. Maintenance workflows are simplified by the standardised screw and key dimensions, and the modularity of indexable inserts allows rapid adaptation to different grades or coatings without replacing the cutter body. The result is a tool that supports stable machining windows and predictable production output. Contact Metav Werkzeuge for advice on integrating the Teknik Makina T295TM into existing toolpaths and to discuss compatible RDMT 1003 insert grades and clamping recommendations Technical data Article number: T295TM Manufacturer: Teknik Makina Product name: round insert face mill for RDMT 1003 Facts Diameter: 100 mm Cutting edges: 7 Overall length: 50 mm Shank diameter: 32 mm Weight: 1.463 kg Special features Compatible with RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 SKU: T295TM FAQ What inserts are required for this cutter? The cutter is specified for RDMT 1003 indexable inserts; compatible insert grades and edge preparations should be selected according to the material and surface finish requirements. How many cutting edges does the milling head use? The tool utilises seven cutting edges distributed around the head to balance cutting forces and support steady material removal. What shank size is needed for the toolholder? A 32 mm shank is specified for the T295TM, ensuring a rigid connection to appropriate toolholders. Which fasteners are used for insert clamping? Insert clamping uses an M3.5 locking screw and M3.5x8.5 Torx screws secured with a T15 key to simplify maintenance and ensure repeatable torque. Is the cutter balanced for high-speed spindle use? The design and mass distribution (1.463 kg) promote stable rotation; final balancing and operational speed should be verified with the chosen insert grade and holder combination. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Round Insert Milling Cutter for RDMT 1003 Indexable Inserts, 8 Cuts, 50mm Length, M3.5 Clamp - Teknik Makina
Take advantage of a compact, high‑coverage milling solution that combines a 100 mm cutting diameter, compatibility with RDMT 1003 indexable inserts and secure Torx fastening for reliable repeatability; order directly via Metav Werkzeuge or consult our specialists for application guidance. T295-1TM Round Indexable Face Mill by Teknik Makina — 100 mm, for RDMT 1003 indexable inserts The T295-1TM is a round indexable face mill engineered for stable face and shoulder milling where quick insert change and consistent surface finish are required 100 mm cutting diameter for broad coverage 8 cutting edges for extended productivity 32 mm mounting bore for secure spindle fit Torx T15 fastening for fast, repeatable insert changes Increased material removal with predictable stability The cutter delivers efficient metal removal thanks to its 100 mm diameter and 8 cutting edges, which together expand the effective cutting circle and reduce cycle times per pass. This design spreads cutting forces across multiple inserts, lowering vibration and improving surface finish — a direct advantage in repetitive production runs and when machining stepped features. The use of indexable plates keeps downtime low because worn inserts are simply replaced rather than the whole tool being reground. Fast, secure clamping for consistent results A secure fastening concept is vital for repeatability; the tool features a 32 mm mounting bore and Torx T15 screws (M3.5x8.5) with an M3.5 locking screw, ensuring stable seating and uniform clamp torque. Stable clamping reduces runout and heat build‑up at the insert seat, which translates into longer insert life and fewer dimensional deviations across batches. The straightforward Torx system also speeds up maintenance tasks on the shop floor. Clear compatibility and simple tool setup Designed specifically for RDMT 1003 indexable inserts, the cutter supports commonly available insert geometries for a wide range of roughing and finishing tasks. The practical overall length and balanced construction facilitate setup in typical milling heads and arbors used in workshop and small‑series production environments. Where insert grades and coatings are selected to suit the workpiece material, the assembly offers a cost‑effective route to consistent machining quality. Practical benefits for procurement and production planning With a modest tool weight and compact profile, the cutter suits situations where tool changeover speed and storage economy matter. The combination of multiple cutting edges and easy insert access lowers unit tooling cost over time and simplifies inventory management when standardised RDMT 1003 inserts are used across several tools. For purchasing, Metav Werkzeuge offers the logistical reliability of a central European supply chain and technical advice for tool selection. Contact Metav Werkzeuge for tailored machining advice on the Teknik Makina T295-1TM round face mill — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt guidance and order coordination Technical Data Article number: T295-1TM Brand: Teknik Makina Product: Round indexable face mill Dimensions & Core Data Diameter: 100 mm Number of cutting edges: 8 Mounting bore: 32 mm Overall length: 50 mm Weight: 1.478 kg Materials & Fastening Suitable for: RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which inserts fit this face mill? The T295-1TM is designed for RDMT 1003 indexable inserts, which are commonly stocked and offer a variety of grades and geometries for different materials. Is the tool stable enough for shoulder milling? Yes. The combination of an optimised 100 mm diameter and secure Torx fastening gives the cutter the stiffness required for controlled shoulder and face milling operations. How does the fastening influence maintenance times? The Torx T15 screw system (M3.5x8.5) enables quick insert changes and repeatable torque application, reducing maintenance time and helping to maintain consistent machining performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Square Tool Head for APKT 1705 Indexable Inserts L52mm Internal Coolant, 8 Cutting Edges - Teknik Makina
Take advantage of the combination of 100 mm diameter rigidity, internal coolant and compatibility with APKT 1705 indexable inserts to improve cycle stability and reduce tooling costs; order the component via Metav Werkzeuge or contact our advisors for integration support. Corner tool head – 100 mm diameter, coolant-through, for APKT 1705 indexable inserts (Teknik Makina) Corner tool head designed for stable face and shoulder machining with coolant-through capability and direct compatibility with APKT 1705 indexable inserts 100 mm diameter for stable cutting Internal coolant for optimised chip evacuation Compatible with APKT 1705 indexable inserts Eight cutting edges for prolonged service life Greater machining stability through a rigid 100 mm design The robust 100 mm diameter construction delivers increased stiffness at the cutting zone, which reduces chatter and improves dimensional accuracy during interrupted and continuous cuts. This translates into more consistent surface finishes and fewer rejected parts, especially when working on shoulders and faces. The solid build supports stable spindle engagement, making the assembly suitable for medium to heavy-duty turning and milling tasks where vibration damping is critical. Coolant-through design for consistent surface quality and tool life A coolant-through feed is integrated to supply cutting fluid directly to the insert rake face, promoting effective cooling and chip control. The internal coolant channel helps maintain a lower cutting temperature and reduces built-up edge formation, which extends insert life and preserves surface integrity. For users unfamiliar with coolant-through tooling: directing coolant to the cutting edge improves lubrication at the point of contact and aids reliable chip evacuation in pocketed or shoulder operations. Cost-effective indexable system with wide insert compatibility Engineered for APKT 1705 indexable inserts and compatible with Taegutec variants, the head supports an economical multi-edge workflow. With 8 cutting edges available through indexable rotation and replacement, the tooling cost per component is reduced and machine uptime is increased. The head’s geometry supports a 90° approach to enable precise shoulder cuts and simplifies set-up for repeat operations, delivering predictable, repeatable results in batch production. Practical assembly and maintenance for shop-floor efficiency The head is supplied for secure fastening using a T15 Torx drive and M4x10 screws, enabling straightforward insert clamping and replacement with standard workshop tools. The compact 52 mm overall length facilitates mounting in compact tool holders while the mass of approximately 1.62 kg provides a balanced feel and helps dampen vibration. Clear torque procedures and the use of the specified Torx key preserve clamping integrity and reduce the risk of insert movement during machining. Contact Metav Werkzeuge today to confirm compatibility with existing tool holders and to arrange technical advice for fitting the Teknik Cutting Tools corner head with coolant-through capability – Metav Werkzeuge can supply detailed integration support from Emmerich. Technical data SKU: T558-1TM Product type: Corner tool head Manufacturer: Teknik Makina eClass: 21181015 Diameter: 100 mm Overall length: 52 mm Centre bore: 32 mm Weight: 1.62 kg Cutting edges: 8 Cutting angle: 90° Internal coolant: yes Compatible insert type: APKT 1705 Compatible insert manufacturer: Taegutec Fastening screw: M4x10 Torx key: T15 FAQ What insert type does the head accept? The corner tool head is designed for APKT 1705 indexable inserts and is compatible with inserts from Taegutec, offering flexible choices for grades and coatings. Does the tool support coolant-through (internal cooling)? Yes, the assembly features internal coolant channels that deliver fluid directly to the cutting edge to aid cooling and chip evacuation. How many indexing positions are available per insert? Each insert can be indexed across multiple edges; the head’s design accommodates 8 cutting edges in operational cycles, extending effective insert usage. Which fastening method is specified for insert clamping? Insert clamping uses M4x10 screws tightened with a T15 Torx drive; following recommended torque settings preserves clamping reliability. Is the head suitable for shoulder and face machining? The 100 mm diameter and 90° cutting angle make the head particularly suitable for precise shoulder and face operations where rigidity and repeatability are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com