Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
100mm Corner Turning Head For APKT 1705 Indexable Inserts, 90° Cutting Angle, M4x10 Torx Clamp - Teknik Makina
Take advantage of robust rigidity and standardised insert compatibility to reduce machining downtime and improve repeatability; the combination of a 32 mm shank and a 90° cutting angle ensures stable performance in routine turning tasks. Order the tool directly via Metav Werkzeuge or consult their specialists for integration advice. Angle Turning Head T558TM — 90° tool head for APKT 1705 indexable inserts (Teknik Cutting Tools) The Angle Turning Head T558TM is a compact, right-angle tool head designed for external turning with APKT 1705 indexable inserts, offering straightforward compatibility for workshop lathes and tool-change systems. Secure M4x10 Torx clamping with T15 key Fits APKT 1705 indexable inserts by Taegutec 32 mm shank diameter for rigid mounting Ø100 mm head diameter with eight cutting edges Stable machining through rigid design The turning head is built around a 32 mm shank and a Ø100 mm head diameter to provide rigidity where it matters: at the cutting zone. This geometry reduces vibration during cuts, which promotes longer insert life and more consistent surface finish. The comparatively short overall length (52 mm) limits cantilever effect, helping maintain concentricity and repeatability across production batches while supporting reliable cycle times on medium-duty lathes. Fast insert changes and standard clamping Compatibility with APKT 1705 inserts simplifies stock management and insert procurement; the clamping system uses an M4x10 Torx screw tightened with a T15 key for secure, repeatable seating. The head accepts inserts from Taegutec, a widely available supplier, so replacement parts are easy to source. The 90° cutting angle gives a defined right-angle geometry that is beneficial for shoulder turning and face-off operations, while the indexed eight cutting edges enable quick rotation to fresh cutting faces without toolholder removal. Workshop integration and handling benefits Weighing 1.62 kg, the head combines solid mass with manageable handling for toolsetters and operators. The compact profile facilitates mounting in standard tool posts or turret stations without excessive overhang. Routine maintenance is limited to insert indexing and periodic torque checks on the Torx screw, keeping downtime low. When fitted with the correct inserts, the head supports consistent results across repeat jobs and lends itself to standardised fixture and process documentation in production environments. Contact Metav Werkzeuge for stock status, tailored mounting recommendations and batch availability of the Teknik Cutting Tools Angle Turning Head T558TM Technical data SKU: T558TM Manufacturer: Teknik Makina Type: Angle turning head for indexable inserts For inserts: APKT 1705 Compatible insert maker: Taegutec Clamping screw: M4x10 Torx key: T15 Dimensions & weights Shank diameter: 32 mm Head diameter: 100 mm Overall length: 52 mm Cutting angle: 90° Number of cutting edges: 8 Weight: 1.62 kg Features Fits APKT 1705 indexable inserts Compatible with Taegutec inserts Torx clamping screw M4x10 Torx key size T15 90° cutting geometry Eight cutting edges for indexing FAQ Which insert type is required for this head? The head is designed for APKT 1705 indexable inserts; compatible inserts from Taegutec will fit the clamping system supplied with the Angle Turning Head T558TM. What is the shank diameter for mounting? The tool holder uses a 32 mm shank diameter for mounting in standard tool posts and turret adapters. How is the insert secured in the tool head? An M4x10 Torx clamping screw secures the insert; the matching Torx key size is T15 for tightening and indexing. Is the cutting geometry suitable for shoulder turning? Yes, the 90° cutting angle is appropriate for shoulder faces and right-angle turning operations, providing a defined cutting geometry for such tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Corner Turning Head for APMT 11T3 Indexable Inserts, 90° Cutting Angle, M2.5x5.5 Torx - Teknik Makina
Take advantage of the combination of a rigid 32 mm shank, a 90° cutting angle and compatibility with APMT 11T3 indexable inserts to maintain accurate corner and face machining with minimal setup time; order via Metav Werkzeuge or request guidance from their technical consultants. Corner tool head T258TM – indexable insert holder for APMT 11T3, 32 mm shank (Teknik Makina) A compact Corner tool head T258TM for secure mounting of APMT 11T3 indexable inserts, engineered to support precise corner and facing operations in general workshop and light industrial milling setups. Corner tool head T258TM by Teknik Makina Compatible with APMT 11T3 inserts (Korloy) 32 mm shank diameter for secure clamping 90° cutting angle, overall length 63 mm Stable geometry for repeatable precision The holder is built around a 32 mm shank and a 100 mm head diameter to provide a stable interface with standard tool posts and turret adaptors. That greater mass and contact area reduce vibration and support repeatable accuracy during each pass, which in practical terms means fewer rejects and less rework. The unit’s weight of 1.81 kg contributes to damping of high-frequency chatter, improving surface finish without additional balancing. Where setup time is at a premium, a stable tool head cuts cycle variability and helps achieve consistent component quality. Fast insert changes and clear compatibility Designed specifically for APMT 11T3 format inserts and compatible with Korloy insert grades, the head features a Torx retention system (Torx screw M2.5x5.5, Torx key T8) for reliable clamping and quick changeover. Indexable inserts allow the cutting edge to be rotated or replaced without altering tool geometry, which conserves machine setup and reduces tooling costs over time. The Torx fixing provides a secure seat to maintain cutting orientation and repeatability, and the clear specification of the retention parts simplifies spare-part sourcing for maintenance planning. Practical integration and machining benefits With a 90° cutting angle and 63 mm overall length, the head is suited to facing and shoulder operations where a square approach is required. The design supports standardised toolholder bores and fixtures, so the holder integrates into existing tooling systems with minimal adaptation. The combination of robust clamping, standardised insert format and compact footprint reduces downtime during tool changes and streamlines workshop logistics. For production environments focused on throughput and surface quality, the head offers a pragmatic balance of rigidity and serviceability. Contact Metav Werkzeuge today to secure procurement advice or confirm machine compatibility for the Corner tool head T258TM — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T258TM Brand: Teknik Makina Product name: Corner tool head For inserts: APMT 11T3 For insert manufacturer: Korloy Facts Shank diameter: 32 mm Head diameter: 100 mm Overall length: 63 mm Weight: 1.81 kg Cutting angle: 90° Torx screw: M2.5x5.5 Special features Torx key size: T8 Compatible with indexable inserts Designed for corner and face machining Solid construction for vibration damping FAQ What insert type fits this tool head? The Corner tool head T258TM accepts APMT 11T3 indexable inserts; compatible insert grades from Korloy are indicated in the technical data and can be used according to the intended machining task. How is the insert secured to the head? Insert retention is by a Torx screw specified as M2.5x5.5; the Torx key required for tightening and loosening is size T8, providing a secure and repeatable clamping force. Which machines or holders is the head suited for? The head is configured with a 32 mm shank, making it suitable for tool posts and adaptors designed for that shank diameter; compatibility should be checked against the machine’s toolholder bore and clamping scheme. Does the head support heavy-duty roughing? The robust construction and mass (1.81 kg) give good damping characteristics; for heavy-duty roughing it is necessary to match the insert geometry and grade to the application, using the APMT 11T3-compatible inserts specified. What are the primary benefits of using this head in production? Using the Corner tool head T258TM reduces setup time through standardised insert mounting, improves stability with its 32 mm shank and head mass, and supports consistent surface quality via the 90° cutting angle. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head for BOMT 1304 Indexable Inserts L50mm with Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of robust stability, efficient cooling and quick insert changeover for reliable cycle times and reduced downtime — order directly via Metav Werkzeuge or ask one of our consultants for application support. Angle tool head for BOMT 1304 indexable inserts by Teknik Makina — 100 mm diameter, internal coolant Angle tool head designed for shoulder and face machining where a precise 90° cutting angle and secure insert clamping are required 100 mm diameter for stable machining Internal coolant for improved chip control Compatible with BOMT 1304 inserts 11 cutting edges for increased productivity Greater process stability through robust geometry and size The compact, heavy-duty design of this tool head provides a solid basis for repeatable results in demanding production environments. The 100 mm diameter and a total length of 50 mm combine to reduce deflection and vibration, which helps maintain dimensional accuracy on workpieces and extends tool life. Fitted inserts are fixed with an M3.5x8.5 screw using a Torx T10 drive for secure clamping; this system ensures consistent seat contact and minimises micro-movement during high‑load cuts. The construction therefore supports efficient material removal with predictable surface quality and contributes to measurable cycle-time improvements on the shop floor. Efficient cooling and fast insert handling for higher throughput Integrated internal coolant channels deliver cutting fluid directly to the cutting zone, improving heat dissipation and assisting chip evacuation. This targeted cooling reduces thermal wear on the insert grade and the tool seat, allowing longer tool life and more consistent cutting performance. The head accepts BOMT 1304 indexable inserts and is compatible with inserts from Ingersoll, enabling quick index changes and reduced machine downtime. With 11 cutting edges available across the set-up, production runs can be optimised for cost per component while maintaining process reliability. Practical advantages for workshop and production use Engineered for industrial metalworking, this indexable tool head is suitable where a true 90° cutting angle is required for shoulders and face operations. The solid build (approx. 2.54 kg) provides inertia that helps steady heavy cuts, while the standardised fixing hardware (Torx and M3.5x8.5 screw) allows straightforward maintenance and predictable repeatability when replacing inserts. Supplied as a dedicated solution for BOMT 1304 tooling systems, the component reduces vendor complexity when sourced through a precision partner and fits into established process chains with minimal adaptation. For technical advice, availability or rapid delivery from Metav Werkzeuge — including application guidance for Teknik Makina angle tool heads — contact our Emmerich centre at +49 2822 7131930 or info@metav-werkzeuge.com to discuss specification and lead times. Technical data SKU: T971TM Product type: Angle tool head for BOMT 1304 Manufacturer: Teknik Makina Internal coolant: Yes Weight: 2.54 kg Facts Diameter: 100 mm Total length: 50 mm Cutting edges: 11 Cutting angle: 90° Torx key: T10 Torx screw: M3.5x8.5 Special features Compatible with BOMT 1304 indexable inserts Compatible insert manufacturer: Ingersoll Label: 100mm Eckmesserkopf BOMT 1304 L50mm mit Innenkühlung FAQ What insert type fits this head? The head accepts BOMT 1304 indexable inserts; compatibility with Ingersoll‑made inserts is specified for straightforward procurement. How does the internal coolant improve performance? Internal coolant channels deliver fluid directly to the cutting edge, reducing temperature at the tool‑workpiece interface and aiding chip control; this extends insert life and stabilises cutting conditions for the angle tool head. Is the clamping system durable and easy to service? Yes — the insert is secured with an M3.5x8.5 screw tightened with a Torx T10, offering repeatable clamping torque and simple maintenance during insert changes. Which applications are best suited for this tool head? The component is designed for shoulder and face operations where a true 90° cutting angle and solid tool support are needed, making it suitable for production workshops and toolrooms using BOMT 1304 inserts. Does the head provide improved rigidity for heavy cuts? The 100 mm diameter and compact 50 mm length, combined with the head’s mass (approx. 2.54 kg), enhance rigidity and help reduce vibration during higher‑load machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head for LNGX 1307 Indexable Inserts L50mm with Internal Coolant - Teknik Makina
Take advantage of the combination of a 100 mm diameter body, precise 90° cutting geometry and integrated internal coolant to secure reliable shoulder turning and efficient chip evacuation; order the corner tool head directly via Metav Werkzeuge or consult our specialists for compatibility questions. Corner tool head T494-1TM – 100 mm diameter, 90° cutting angle (Teknik Makina) A Corner tool head designed for industrial turning with LNGX 1307 indexable inserts, offering internal coolant and compact 50 mm overall length for accurate shoulder machining. 100 mm diameter for stable cutting 90° cutting angle for precise shoulder turning Internal coolant for improved chip evacuation Compatible with LNGX 1307 inserts by Walter High stability and repeatable shoulder accuracy The robust design of this turning head combines a 100 mm diameter body with a short 50 mm overall length, delivering improved rigidity and reduced vibration during shoulder cuts. Such geometry results in stable performance and consistent dimensional accuracy when performing 90° operations. The mass of 1.542 kg contributes to dampening chatter; in practice this reduces rework and helps maintain surface finish when working at moderate to heavy cutting depths. The compact form also supports integration into existing toolholders with a clear focus on repeatability. Controlled cooling and cleaner chip flow for longer tool life Equipped with internal coolant, the head directs cutting fluid close to the cutting edge to aid lubrication and cooling where it matters most. Targeted cooling improves heat dissipation at the shear zone, which in turn supports longer insert life and more predictable wear patterns. Better chip control reduces recutting and helps maintain cycle times; for shops aiming to increase uptime, this feature translates into fewer unscheduled tool changes and steadier productivity. The internal supply is especially useful in operations that demand consistent surface integrity. Proven compatibility and simple, secure clamping The turning head is specified for LNGX 1307 indexable inserts and is compatible with inserts from Walter, enabling straightforward sourcing and replacement. Assembly uses a Torx T15 driver and M4x11 torque screw, which are standard in many workshops and facilitate quick maintenance. The design accommodates seven cutting edges on the assembly, offering clear technical information for inventory planning and reconditioning cycles. Such standardisation reduces conversion effort when retrofitting existing setups and supports fast tool change procedures. Practical integration into workshop workflows With a 32 mm mounting diameter and a compact footprint, the head is designed for easy adoption in standard turning stations and modular tool systems. Precise 90° cutting geometry makes it suited to shoulder turning and facing tasks where right-angled profiles are required. The combination of robust construction, targeted coolant and standard fasteners means the unit can be maintained with common workshop tools, helping to keep maintenance intervals short and predictable. This pragmatic approach aligns with operational needs for dependable tooling and simplified stock management. Discuss specification and procurement of the Teknik Makina corner tool head with Metav Werkzeuge – direct supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: T494-1TM UID: T494-1TM Product type: Corner tool head Label: 100mm Eckmesserkopf LNGX 1307 L50mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 50 mm Mounting diameter: 32 mm Weight: 1.542 kg Cutting angle: 90° Cutting edges: 7 Torx key: T15 Torx screw: M4x11 Special features Internal coolant For LNGX 1307 indexable inserts Compatible with Walter inserts FAQ Which indexable inserts fit this corner tool head? The head accepts LNGX 1307 indexable inserts; compatibility with inserts from Walter is specified for the corner tool head T494-1TM by Teknik Makina. Does the turning head provide internal coolant? Yes — the corner tool head T494-1TM features internal coolant, supplying fluid directly to the cutting zone to aid cooling and chip evacuation. What does a 90° cutting angle mean for workshop applications? A 90° cutting angle on this turning head enables accurate shoulder turns and right-angled profiles, making the head suitable for precise face and shoulder machining tasks. What are the main dimensions to check before ordering? Key dimensions for the T494-1TM are 100 mm diameter, 50 mm overall length and 32 mm mounting diameter; the weight is 1.542 kg. Which fasteners are required for assembly and maintenance? Assembly uses a Torx T15 driver and M4x11 screw, standard items for workshop maintenance on the Teknik Makina corner tool head. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head For LNMT 1306 Indexable Inserts, 90° Cutting Angle, M4x10 Torx T15 - Teknik Makina
Take advantage of a robust combination of precise geometry and secure clamping for consistent shoulder turning. The compatibility with LNMT 1306 indexable inserts and the D32 shank ensure stable mounting and predictable tool life. Order directly via Metav Werkzeuge or request a specialist consultation for holder selection. Corner tool head T231TM – Turning head for LNMT 1306 indexable inserts, D32 shank (Teknik Makina) A durable corner tool head engineered for reliable shoulder and face-turning operations with LNMT 1306 indexable inserts Fits LNMT 1306 indexable inserts compatible with ISCAR 32 mm D shank for secure toolholder mounting 90° cutting angle for precise shoulder turning Torx fixings M4x10 with T15 key for fast insert clamping Consistent results from proven insert compatibility The turning head is designed around the standard geometry of indexable inserts, notably the LNMT 1306 form, providing repeatable cutting geometry for serial production. By accepting inserts from established suppliers such as ISCAR, the component reduces setup time and simplifies inventory: spare inserts are readily available and replacement is straightforward. This compatibility translates into reduced downtime and a steady surface finish across batches, which is decisive in machining series parts where process consistency matters. Rigid mounting and geometry for stable machining The tool head’s D32 shank and 100 mm tool diameter combine to deliver secure seating in the toolholder and reduced susceptibility to chatter. A true 90° cutting angle supports accurate shoulder and planing cuts while promoting uniform chip flow. The unit’s mass (1.682 kg) contributes to damping dynamics on heavy cuts, helping to preserve insert life and to achieve a cleaner finish on the workpiece. These engineering choices result in improved dimensional repeatability and predictable tool-change intervals for production environments. Quick clamping and practical service routines Insert retention is accomplished with a Torx M4x10 fixing tightened with a T15 key, enabling fast, repeatable clamp torque during changeover. The compact overall length and robust fastening reduce the need for frequent readjustment and make routine maintenance straightforward. Clear mechanical interfaces mean fewer variables during reassembly, which shortens repair windows and supports sustained throughput. For applications requiring standard shoulder turning geometry, this head offers a pragmatic balance of accessibility and industrial robustness. Contact Metav Werkzeuge for tailored advice on toolholder matching and production integration — experts are available to recommend the correct holder and to confirm compatibility with existing turning centres Technical data Article number: T231TM Manufacturer: Teknik Makina Suitable for: LNMT 1306 indexable inserts Compatible insert brand: ISCAR Torx screw: M4x10 Facts Shank diameter: 32 mm Weight: 1.682 kg Diameter: 100 mm Overall length: 50 mm Cutting angle: 90° Number of cutting edges: 10 Special features Torx key: T15 Designed for shoulder turning and facing Robust clamping for repeatable insert seating FAQ What inserts fit this turning head? The corner tool head accepts LNMT 1306 indexable inserts; inserts from ISCAR are compatible and match the head’s insert pocket geometry. What shank size is required for the toolholder? The tool head uses a 32 mm shank (D32) for secure mounting; ensure the holder accommodates a D32 shank for optimal rigidity. Which cutting operations is the head suited for? This tool head is designed for shoulder and facing operations where a 90° cutting angle and stable insert seating deliver repeatable results. How is the insert secured and changed? Insert clamping is performed with a Torx screw M4x10; the screw is driven with a T15 key for consistent torque and fast changeover. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah. 422 Nolu Sokak No:9; Selcuklu/KONYA; Turkey / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Corner Turning Head for LNMX 1006 Indexable Inserts, 90° Cutting Angle, M3x7 Torx Screw - Teknik Makina
Take advantage of the combination of a 90° cutting angle, a 100 mm diameter and secure Torx fixation for predictable turning performance; order the corner tool head directly via Metav Werkzeuge or ask the consultants for application advice. Corner tool head T390TM — 90° 100 mm indexable tool head by Teknik Makina The Corner tool head T390TM is an angled turning head engineered for reliable facing and shoulder operations using LNMX 1006 indexable inserts. 100 mm diameter for stable machining 90° cutting angle for facing and shoulder work Compatible with LNMX 1006 indexable inserts 32 mm shank with M3x7 Torx fixation Consistent machining performance through precise geometry The T390TM tool head combines a 100 mm diameter body with a 90° cutting angle to provide a stable support platform that reduces vibration during facing and shoulder turning. The robust geometry helps maintain a constant cutting line, improving surface finish and extending insert life — a tangible efficiency gain on medium- to high-duty cycles. Compatibility with standard LNMX‑type inserts allows straightforward integration into existing tooling systems while ensuring repeatable results on workpieces where dimensional control is critical. Secure clamping and low-maintenance changeover A deliberate fixation design featuring an M3x7 Torx screw secured with a T8 key provides reliable insert retention and simple servicing. The 32 mm shank (mount) offers a firm connection to the toolpost or boring bar, reducing micro-movement that can compromise tolerances. Quick, tool-assisted insert changes reduce downtime, and the straightforward screw interface supports predictable torque control during maintenance, contributing to consistent tool seating and repeatability across production batches. Workshop-ready design for predictable integration With an overall height of 50 mm and a nominal weight of 1.7 kg, the head is dimensioned for straightforward mounting and balance within standard turning setups. The construction supports common industrial workflows and is supplied optimised for LNMX 1006 inserts from Korloy, simplifying procurement and stocking. Backing by Teknik Makina signals manufacturing consistency, while distribution through Metav ensures accessible supply and a clear route for technical clarification or ordering. Contact Metav Werkzeuge for tailored application advice on Teknik Makina tool heads and to request specification support — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T390TM Manufacturer: Teknik Makina For: LNMX 1006 Indexable Inserts Compatible insert maker: Korloy Core data Diameter: 100 mm Overall height: 50 mm Shank diameter (mount): 32 mm Weight: 1.7 kg Cutting angle: 90° Cutting edges: 9 Special features Torx screw: M3x7 Torx key: T8 SKU: T390TM FAQ Which inserts are compatible with this tool head? The corner tool head T390TM is designed for LNMX 1006 indexable inserts and is compatible with Korloy LNMX 1006 grades for a variety of materials. What is the mounting diameter required? Mounting requires a 32 mm shank connection; the specification for the T390TM lists a 32 mm mount diameter. What cutting angle does the head provide and for which operations is it suited? The head features a 90° cutting angle, making it well suited to facing, shoulder turning and applications where a square cut geometry is required. How are the inserts secured in the tool head? Inserts are secured with an M3x7 Torx screw that is tightened using a T8 key, providing secure fixation and straightforward changeover. Is the tool head suitable for industrial turning applications? Yes, the T390TM’s 100 mm diameter, solid mount and engineered fixation make it appropriate for robust turning tasks within industrial workshop environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head for R390 18 Indexable Inserts L52mm With Internal Coolant - Teknik Makina
Take advantage of the combination of robust build quality, integrated internal coolant, and proven compatibility with R390 18 indexable inserts to ensure stable, repeatable machining cycles; order the corner milling head directly via Metav Werkzeuge or ask the consultants if needed. Corner milling head T428-1TM for R390 18 indexable inserts — 100 mm diameter, internal coolant (Teknik Makina) Corner milling head T428-1TM designed for face and shoulder machining with R390 18 indexable inserts, providing coolant-fed cutting and high rigidity in production environments. 100 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with R390 18 Sandvik inserts 90° cutting angle for square shoulder machining Stable, repeatable cutting for production environments The corner milling head is engineered to deliver consistent results in batch and series production. With a 100 mm diameter and a compact overall length of 52 mm, the geometry provides increased stiffness and reduced vibration during heavy engagement cuts. Compatibility with R390 18 indexable inserts (Sandvik-compatible) allows the use of widely available grades and corner radii, simplifying process planning. The robust mass (1.595 kg) contributes to stable spindle loads and predictable cutting forces, which supports repeatable surface quality and machining tolerances. Integrated coolant for longer tool life and reliable surface finish Built-in internal coolant channels feed cutting fluid directly to the insert edge, improving chip control and reducing thermal load at the cutting zone. This targeted coolant delivery helps maintain cutting edge integrity, delays wear, and can extend indexable insert life under continuous operation. Better chip evacuation also lowers the risk of re-cutting, leading to more consistent part finishes and fewer unplanned interventions on the machine, which benefits cycle-time reliability across shifts. Simple, secure clamping to speed up changeovers The design focuses on straightforward assembly and secure fixing: fasten the insert with the specified Torx T15 key and M4x10 Torx screws for a firm seat and repeatable insert positioning. The 90° cutting angle is ideal for square shoulder operations, while the compact L52 mm overall length improves access in tighter tool turrets. Together, these features reduce set-up time and support efficient tool changes, helping to minimise downtime in mixed-production environments where flexibility and quick return to cutting are essential. Contact Metav Werkzeuge to discuss how the Teknik Makina corner milling head T428-1TM aligns with specific production needs or to request a tailored quotation directly from the experts at Metav Werkzeuge. Technical data Article number: T428-1TM UID: T428-1TM Product type: Corner milling head Variant: for R390 18 indexable inserts Data Diameter: 100 mm Overall length: 52 mm Weight: 1.595 kg Cutting angle: 90° Cutting edges: 7 ECLASS: 21181015 Special features Internal coolant Compatible with R390 18 indexable inserts Fits Sandvik insert ranges Torx key: T15 Torx screw: M4x10 Manufacturer: Teknik Makina FAQ Which insert family fits this cutter head? The cutter head accepts R390 18 indexable inserts and is compatible with standard Sandvik R390 18 grades and geometries. Is coolant supplied through the tool? Yes, the tool includes internal coolant channels for direct feed to the cutting edge to improve chip control and tool life. What are the main dimensions and mass? The tool has a diameter of 100 mm, an overall length of 52 mm and weighs 1.595 kg. What fixing hardware is required for the inserts? Inserts are secured using M4x10 Torx screws tightened with a Torx T15 key to ensure a repeatable, secure clamp. For which machining tasks is the tool optimised? The head is optimised for square shoulder and face machining where a 90° cutting angle and strong rigidity are required. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Corner Turning Head for TPKN 1603-2204 Indexable Inserts, 90° Cut Angle, M6x17 Clamp Screw - Teknik Makina
Benefit from the combination of a 90° cutting geometry, a 32 mm shank and six cutting edges for stable, repeatable corner turning and reduced rework; order the component via Metav Werkzeuge or request advice from our technical consultants. Corner cutting head T102TM – 90° geometry, Ø100 mm for TPKN 1603–2204 indexable inserts (Teknik Makina) The Corner cutting head T102TM is a compact, rigid turning head engineered for 90° corner operations with TPKN 1603–2204 indexable inserts, designed for lathe and CNC toolpost applications. *90° cutting geometry for precise corner cutting *Compatible with TPKN 1603–2204 indexable inserts *32 mm shank diameter for secure clamping *Six cutting edges for long service intervals Accurate corner turning that saves machining time The 90° configuration delivers a true right‑angle cut that simplifies setup and reduces secondary operations. With a Ø100 mm head diameter and six cutting edges, the assembly maintains cutting stability across repetitive cycles, which leads to fewer vibrations and improved surface quality. This geometry is particularly effective where shoulder or face turning calls for crisp corners and consistent tolerance control, translating directly into shorter cycle times and less scrap. Secure clamping and straightforward assembly for uptime A 32 mm shank provides a standardised interface for rigid attachment in many toolposts and adapters, while the mechanical fixation is achieved with a locking screw M6x17 and an M3 hex screw, using a 4 mm Allen key for adjustment. The clamping plate reference TA010 ensures correct seat and repeatable indexing when replacing inserts. Together these features enable fast insert replacement and consistent clamping force, reducing setup variation and machine downtime. Production-ready durability and predictable performance Constructed for workshop and industrial use, the unit’s mass (approx. 1.518 kg) contributes to a balanced toolhead that resists chatter and extends insert life under continuous use. Compatibility with TPKN 1603–2204 indexable inserts allows selection of grades and geometries to match materials and cutting parameters; the result is predictable tool life and lower per‑component machining costs. The combination of robust construction and standard insert format supports both single‑piece and batch production environments. Where this toolhead excels in the workflow The design is well suited to turning centres that require precise shoulder formation and repeatable corner finishes. The holder’s secure interface and standard insert family make it a practical choice for contract workshops, maintenance departments and production lines aiming to reduce tool change time and increase first‑pass quality. For enquiries on matching insert grades or setting recommended cutting data, Metav’s technical advisors provide application guidance and stock information. For tailored technical advice on the Teknik Makina T102TM corner cutting head and fast supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: T102TM Manufacturer: Teknik Makina Designation: Corner cutting head (Eckmesserkopf) For inserts: for TPKN 1603–2204 Indexable Inserts Facts Diameter: 100 mm Shank diameter (D): 32 mm Total length: 52 mm Weight: 1.518 kg Cutting angle: 90° Number of cutting edges: 6 Special features Suitable for TPKN 1603–2204 indexable inserts Locking screw: M6x17 Clamping plate: TA010 Hex screw: M3 Allen key size: 4 SKU: T102TM FAQ Which indexable inserts fit this toolhead? The T102TM accepts TPKN 1603–2204 indexable inserts; this standard insert family provides options for grades and geometries to suit a wide range of materials. What toolpost or adapter size is required? The holder features a 32 mm shank diameter, so a corresponding 32 mm toolpost or adapter is required for secure mounting. Is the toolhead suitable for heavy roughing cuts? The mass and balanced design give good stability for moderate roughing and finishing operations; for heavy stock removal select an insert grade and cutting parameters matched to the workpiece material. Which fasteners and accessories are used for assembly? Assembly and clamping reference the M6x17 locking screw, the TA010 clamping plate and an M3 hex screw; a 4 mm Allen key is used for tightening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head for XNEX 0806 Indexable Inserts L52mm With Internal Coolant - Teknik Makina
Take advantage of a robust 100 mm tool body with internal coolant and a true 90° shoulder geometry for efficient, repeatable shoulder milling; order the tool via Metav Werkzeuge or contact our consultants for application support. T846-1TM 100 mm 90° indexable shoulder milling head by Teknik Makina The T846-1TM is a 90° indexable shoulder milling head designed for precision shoulder milling with XNEX 0806 indexable inserts, offering internal coolant and a compact 52 mm overall length for confined setups. 100 mm diameter for stable machining Internal coolant for improved chip evacuation Compatible with XNEX 0806 inserts (SECO) Eight cutting edges, 90° shoulder geometry High productivity through stable cutting geometry The head’s 100 mm diameter and rigid body provide a stable platform that reduces vibration during shoulder cuts, which translates into higher surface quality and extended insert life. The 90° cutting angle is engineered for true square shoulders, enabling accurate face and shoulder operations with predictable tolerances. Where cycle time and consistent results matter, this tool head delivers measurable productivity gains by allowing higher feed rates while maintaining component quality. Improved process reliability with directed cooling Equipped with internal coolant, the cutter head channels cooling directly to the insert pocket, improving chip control and heat dissipation. This arrangement reduces thermal load on the cutting edge and minimises built-up edge formation, so tool life is increased and rework risk is lowered. The internal coolant capability is particularly beneficial in medium- to high-speed machining where thermal stability impacts dimensional accuracy and surface finish. Simplified integration and maintenance in the workshop Compatibility with XNEX 0806 indexable inserts and standard fastening (Torx key T15, screw M4x12.5) means the head can be serviced quickly using common workshop tools. The mounting and insert change routines are straightforward, reducing downtime and supporting continuous production. The design’s accessibility and standardised fastenings help maintenance teams to perform quick insert indexing and clamp checks without specialised equipment. Versatile applications and material capability With eight insert positions and a robust construction, the tool head is suited to shoulder milling tasks across a range of components where square faces and shoulders are required. The combination of indexed insert use and direct coolant support makes it suitable for operations demanding repeatability and surface integrity. For setups where space is limited, the 52 mm overall length provides a compact option without sacrificing stiffness. Contact Metav Werkzeuge for tailored advice on using the Teknik Makina T846-1TM in specific production environments, or to arrange procurement and delivery from our Emmerich location — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: T846-1TM Label: 100mm Eckmesserkopf XNEX 0806 L52mm mit Innenkühlung Product type: Eckmesserkopf Manufacturer: Teknik Makina eClass: 21181015 Facts Diameter: 100 mm Overall length: 52 mm Weight: 1.755 kg Cutting edges: 8 Cutting angle: 90° Special features Internal coolant: yes Compatible inserts: XNEX 0806 Compatible insert manufacturer: SECO Torx key: T15 Torx screw: M4x12.5 SKU: T846-1TM FAQ What inserts are compatible with this head? The T846-1TM is designed for XNEX 0806 indexable inserts and is specified as compatible with SECO insert variants using that geometry. Does the head provide coolant supply to the cutting edge? Yes, the head features internal coolant, supplying fluid directly to the insert pocket to improve chip evacuation and thermal control. What fastening is required for insert screws? Insert screws use a Torx interface; a T15 Torx key fits the fastening and the specified screw size is M4x12.5. Is the tool suitable for tight working envelopes? The compact 52 mm overall length makes the head suitable for confined setups while preserving rigidity for shoulder machining. How many cutting edges are available per head? The head accommodates eight indexed cutting edges, optimised for 90° shoulder operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head For XNEX 0806 Indexable Inserts, 90° Cutting Angle, 7 Edges - Teknik Makina
Combine high-precision geometry with robust mounting and wide compatibility to keep turning processes consistent and predictable; take advantage of the 90° cutting angle and 32 mm shank for rigid set-ups. Order the tool directly through Metav Werkzeuge or consult the team for specification support. Corner Tool Head T846TM – 90° indexable insert holder with 32 mm shank (Teknik Cutting Tools) The Corner Tool Head is a compact indexable insert holder developed for XNEX 0806 inserts, delivering a defined 90° cutting geometry suited to facing and external turning operations *Rigid 90° cutting geometry *32 mm shank for secure mounting *Compatible with XNEX 0806 inserts *Accepts SECO and WINSTAR inserts Precise 90° geometry for predictable turning results Engineered to maintain a consistent profile during facing and square-cut operations, the holder features a 90° cutting angle that ensures repeatable engagement with the workpiece. The specified cutting layout—accepting XNEX 0806 indexable inserts—reduces tolerance creep and simplifies process planning, since a reliable insert family and a defined geometry allow accurate calculation of tool offsets and cutting depths. This technical certainty supports cycle-time optimisation and lowers scrap rates in batch production. Robust clamping and compact dimensions support rigidity A 32 mm shank and a robust body diameter of Ø100 mm provide the mechanical stiffness necessary for stable cutting, while the compact overall length of 52 mm helps to minimise overhang. Fastening is by an M4x12.5 Torx screw (T15), offering a repeatable and secure clamp with straightforward serviceability. The unit weight of 1.755 kg contributes to a balanced spindle load and predictable dynamic behaviour, important for achieving consistent surface finish and prolonging insert life. Broad compatibility reduces inventory complexity The head is prepared for the XNEX 0806 insert family and is compatible with insert manufacturers SECO and WINSTAR, enabling flexible procurement and simple replacement strategies. Standardised insert use cuts stocking complexity and aligns with lean tooling practices, while the solid construction supports heavy-duty turning where repeatability is critical. For workshops seeking dependable toolholding that integrates into existing tool sets, this head offers a pragmatic combination of standard interfaces and durable design. For specification advice or to confirm fitment, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 to discuss the Teknik Cutting Tools Corner Tool Head T846TM and its suitability for precise 90° turning applications Technical Data Article number: T846TM Designation: Corner Tool Head for XNEX 0806 indexable inserts Manufacturer: Teknik Cutting Tools (Teknik Makina) Core dimensions Shank diameter: 32 mm Diameter: 100 mm Overall length: 52 mm Weight: 1.755 kg Cutting angle: 90° Cutting edges: 7 Materials & compatibility Compatible with XNEX 0806 indexable inserts Suitable for SECO and WINSTAR inserts Fastening: M4x12.5 Torx screw (T15) FAQ What insert type fits this tool head? The Corner Tool Head T846TM is designed for XNEX 0806 indexable inserts and accepts compatible grades from SECO and WINSTAR. Which shank diameter is required for the holder? Mounting requires a 32 mm shank interface; the compact design supports secure clamping and reduced overhang. How is the insert secured in the head? Inserts are retained by the specified clamp arrangement and secured using an M4x12.5 Torx screw (T15) for consistent seat and repeatable reassembly. Is the head suitable for facing and external turning? Yes—the defined 90° cutting geometry makes the head suitable for facing and square external turning operations where precise shoulder and step features are required. What level of balancing or dynamic behaviour can be expected? With a balanced form factor and a weight of 1.755 kg, the head provides stable dynamic behaviour for standard turning speeds when installed with the correct shank and spindle setup. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head For XNKT 0805 Indexable Inserts With 8 Cutting Edges, M4x10 Torx T15 - Teknik Makina
Benefit from stable mounting and high productivity thanks to the combination of a 40 mm shank and eight cutting edges; compatibility with XNKT 0805 indexable inserts simplifies tooling choices. Order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head – for XNKT 0805 indexable inserts, 100 mm diameter (Teknik Makina) The Corner tool head designed for turning and facing operations with XNKT 0805 indexable inserts, offering a compact 100 mm diameter head for robust workshop and CNC use. Compact 100 mm head diameter Designed for XNKT 0805 inserts 40 mm shank for secure mounting Eight cutting edges for increased productivity Stable mounting for consistent surface quality A solid 40 mm shank provides high radial stability and reduces vibration during turning and facing tasks. The mass and geometry of the head are engineered to transfer cutting forces evenly, which leads to improved surface finishes and longer insert life. By combining a stiff clamping interface with the correct screw interface (M4x10 Torx) and required tool bit engagement (T15 key), the head supports reproducible setups and faster cycle times on serial production runs. Built for efficient indexable-insert machining Compatibility with XNKT 0805 indexable inserts makes insert selection straightforward and cost-effective. The head accepts standard inserts from Korloy, enabling flexible edge geometry choices for different materials and cutting conditions. With eight cutting edges, tool change intervals are extended and downtime minimised, providing a direct performance advantage in medium- to high-volume turning. The modular concept keeps tooling logistics simple and reduces total tool inventory. Easy maintenance and secure clamping Maintenance is straightforward: the head uses a standard M4x10 Torx fixing and a T15 key for reliable clamp torque. Fast access to the clamping screw and clear tool geometry reduce risk of incorrect assembly. The pragmatic design supports routine checks and quick insert indexing, so workshops can maintain throughput without complex tooling procedures. The robust construction also assists repeatable alignment when changing heads between machines. Suitable for workshop and industrial applications The tool head’s dimensions — 100 mm diameter and 52 mm overall height — are optimised for common turning and facing setups while keeping tool overhang moderate. At a weight of 1.575 kg, the unit balances rigidity with manageable handling during tool change. Manufactured by Teknik Makina, this head is aimed at both independent workshops and production environments that require reliable, repeatable performance with standardised indexable inserts. Contact Metav Werkzeuge for tailored advice on Teknik Makina’s corner tool head T907TM with a 100 mm diameter and secure 40 mm shank mounting — assistance is available from our Emmerich-based specialists to ensure the right configuration for the application Technical data Article number: T907TM Manufacturer: Teknik Makina Suitable for inserts: XNKT 0805 Compatible insert manufacturer: Korloy Screw type: M4x10 Torx Torx key: T15 Weight: 1.575 kg Facts Diameter: 100 mm Overall height: 52 mm Shank diameter: 40 mm Cutting edges: 8 Special features Designed for indexable insert turning and facing Robust shank for reduced vibration Quick-access Torx clamping screw Compatible with Korloy XNKT 0805 inserts Manufacturer: Teknik Makina FAQ What inserts does the corner tool head accept? The corner tool head is designed for XNKT 0805 indexable inserts and is compatible with Korloy inserts of that designation. What are the mounting dimensions for this head? Mounting requires a 40 mm shank seat and the head’s diameter is 100 mm with an overall height of 52 mm. How many cutting edges are available on the tool head? The unit provides eight cutting edges, increasing productive runtime before index or insert replacement is needed. Which fastener is used to secure the insert or clamp? A M4x10 Torx screw secures the clamping mechanism; a T15 Torx key is required for tightening. What is the product SKU and who manufactures it? The SKU is T907TM and the head is manufactured by Teknik Makina Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head For XOMX 1204 Indexable Inserts, 90° Cutting Angle, M3.5x8.5 Torx Screw - Teknik Makina
Take advantage of a compact, rigid toolholder that combines a 90° cutting angle, a 32 mm shank and compatibility with XOMX 1204 indexable inserts to deliver stable, repeatable facing and profiling operations. The combination of stout clamping and straightforward insert changes reduces setup time and supports steady production flows—order via Metav Werkzeuge or contact our consultants for specification support. 90° Indexable Turning Head T518TM by Teknik Makina — for XOMX 1204 indexable inserts, 32 mm shank The 90° Indexable Turning Head T518TM is a compact turning head engineered for facing and square-off operations with XOMX 1204 indexable inserts; designed for workshop toolholders with a 32 mm shank and rapid insert replacement. 90° cutting angle for precise facing Suitable for XOMX 1204 indexable inserts 32 mm shank diameter for stable clamping Torx M3.5x8.5 screw with T10 key Consistent results through rigid design and defined cutting geometry A robust toolholder reduces chatter and improves surface finish; the T518TM’s 32 mm shank and substantial head body (head diameter 100 mm) increase rigidity during heavy facing cuts. The 90° cutting angle is especially effective for square-off and finishing passes where dimensional control is critical. By focusing on mechanical stability, this turning head offers a verifiable basis for choosing a holder that helps maintain tolerances and extend insert life, thereby supporting predictable cycle times and process reliability. Fast insert changes and straightforward maintenance to shorten downtime Insert replacement is simplified by the M3.5x8.5 Torx screw and T10 key interface, enabling quick, repeatable clamping without special tooling. Compatibility with XOMX 1204 inserts—also SECO-compatible—allows the use of established insert variants, reducing inventory complexity. This straightforward maintenance routine means less production interruption and faster return to cutting, which can improve throughput when tool changes are frequent or when multiple machines use the same insert family. Practical integration for workshop environments and operator clarity With an overall length of 52 mm and a measured mass of 1.817 kg, the turning head balances compactness with the mass needed to dampen vibration in many lathe setups. The head is prepared for indexable insert use: inserts are indexed rather than re-ground, so component replacement is rapid and repeatable. For those less familiar with indexable tooling, an indexable insert is a replaceable cutting tip seated into the holder; this approach separates the expensive holder from the consumable insert, delivering cost efficiency for workshops that prioritise uptime and consistent part quality. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools T518TM into existing toolholders—our Emmerich facility provides supply and application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T518TM Name: 90° indexable turning head Manufacturer: Teknik Makina Suitable for inserts: XOMX 1204 Core technical data Shank diameter: 32 mm Weight: 1.817 kg Head diameter: 100 mm Overall length: 52 mm Cutting angle: 90° Cutting edges: 10 Special features Torx screw: M3.5x8.5 Torx key size: T10 For indexable inserts: XOMX 1204 Compatible with SECO inserts FAQ Which indexable inserts fit this turning head? The T518TM is designed for XOMX 1204 indexable inserts; SECO-compatible variants can be used where specified. What shank diameter is required for mounting? This turning head has a 32 mm shank and is intended for toolholders that accept a 32 mm diameter mounting. How is the insert secured and changed? Inserts are clamped with an M3.5x8.5 Torx screw, driven with a T10 key, allowing fast, repeatable insert changes for the T518TM. Is the tool suitable for facing heavy cuts? The combination of a substantial head diameter (100 mm), 32 mm shank and 90° cutting angle gives the toolholder the rigidity typically required for reliable facing and square-off operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Tool Head For ADKT 1505 Indexable Inserts, 90° Cutting Angle, M4x10 Fixing - Teknik Makina
Take advantage of a precise 90° cutting angle and a 32 mm shank for stable clamping and consistent shoulder finishes; compatibility with ADKT 1505 indexable inserts (ISCAR) ensures fast tool changes and predictable process behaviour. Order through Metav Werkzeuge or request technical clarification from our advisors for seamless integration into existing turning setups. Corner turning head T207TM — 90° toolholder for ADKT 1505 indexable inserts, 32 mm shank (Teknik Makina) A Corner turning head T207TM engineered for accurate shoulder and face turning operations in CNC and manual lathes using ADKT 1505 indexable inserts. 90° cutting angle for shoulder turning 32 mm shank diameter for rigid mounting Compatible with ADKT 1505 inserts (ISCAR) Secured by M4x10 Torx screw (T15) High rigidity for precise shoulder finishes The T207TM delivers repeatable shoulder geometry by combining a compact head with a robust shank. The 32 mm shank contributes to reduced vibration and enhanced tool life, while the 90° cutting angle is optimised for square shoulder and facing operations where consistent surface finish and dimensional control are required. For production environments, this stability translates into fewer reworks and improved cycle-time predictability, making the toolholder a rational choice when throughput and accuracy matter. Quick indexable insert handling and secure clamping Designed for ADKT 1505 indexable inserts, the holder accepts common commercial grades and geometries, enabling fast recovery of cutting edge performance. The insert retention is managed with an M4x10 Torx screw, tightened or released with a T15 key, which simplifies insert changes and maintenance routines. The combination of standardised fixing hardware and widespread insert availability reduces downtime and simplifies spare-part logistics, supporting efficient shop-floor workflows. Practical design for workshop and industrial use With a head diameter of 100 and an overall length of 52, the toolhead balances accessibility and strength for a wide range of turning tasks. The component’s mass (approximately 1.546 kg) provides inherent damping for interrupted cuts, while the geometry supports both roughing and finishing passes when paired with the appropriate insert grade. Compatibility with ISCAR-format ADKT 1505 inserts ensures flexible tooling strategies across different materials and applications without the need to redesign tool stations. For shoulder turning tasks that demand repeatability and fast insert exchange, contact Metav Werkzeuge to check availability and request detailed integration advice for the Teknik Cutting Tools corner turning head T207TM via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data SKU: T207TM Manufacturer: Teknik Makina / Teknik Cutting Tools Diameter: 100 mm Shank diameter: 32 mm Overall length: 52 mm Weight: 1.546 kg Cutting angle: 90° Number of cutting edges: 8 Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Fastening screw: M4x10 Torx Required Torx key: T15 FAQ What inserts fit this turning head? The corner turning head accepts ADKT 1505 indexable inserts; it is designed for standard ADKT 1505 geometries and works with ISCAR-format inserts. Is the holder suitable for heavy-duty shoulder turning? The robust design, 32 mm shank and 90° cutting angle make the holder appropriate for demanding shoulder and face turning tasks where rigidity and repeatability are priorities. Which tool secures the insert and what size is required? Insert retention is via an M4x10 Torx screw; a T15 Torx key is used to tighten or release the screw for insert changes. Can this head be used on most CNC lathes? The 32 mm shank is intended for tooling systems that accept that diameter; the head is suitable where the machine turret or holder accepts a 32 mm interface and the required overhang is within the machine’s capability. What benefit does the 90° cutting angle provide? A 90° angle provides a true shoulder geometry and reliable face finishes, reducing secondary operations for square-edged turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Corner Turning Tool Head for LNMX 1510 Indexable Inserts, 90° Cutting Angle, 8 Edges, M4x12.5 Fixing - Teknik Makina
Robust 90° corner tool head with a 100 mm head diameter and 32 mm shank bore to secure LNMX 1510 indexable inserts; the design combines stable cutting performance with quick, repeatable insert clamping. Order the component via Metav Werkzeuge or request tailored integration advice from our specialists. Corner tool head T378TM — indexable insert holder with 90° cutting angle (Teknik Makina) Corner tool head T378TM for precision corner turning and facing with LNMX 1510 indexable inserts on industrial turning equipment 90° cutting angle for precise corner cutting Compatible with LNMX 1510 indexable inserts 100 mm head diameter for increased stability Torx screw M4x12.5 with T15 key specification Consistent corner geometry for reliable part quality The design delivers a 90° cutting angle that ensures repeatable corner profiles and predictable tool path planning. A larger 100 mm head diameter reduces deflection under load, which improves surface finish and reduces scrap rates in serial production. With a measured weight of 1.644 kg and a compact overall length of 52 mm, the head balances mass for rigidity without excessive overhang, supporting stable machining during short- and medium-run operations. Fast, repeatable clamping to shorten set-up times Clamping is driven by a Torx M4x12.5 fixing that corresponds to a T15 key size, offering secure, consistent tightening torque and simple maintenance routines. The standardised screw interface reduces the risk of incorrect tightening and helps to shorten changeover time between inserts. Use of common fastening hardware assists workshops in maintaining predictable set-ups and minimises downtime associated with insert replacement. Broad compatibility to simplify inventory and sourcing The holder is specified for LNMX 1510 indexable inserts and lists compatibility with major suppliers such as ISCAR, Korloy, LMN and YG-1, enabling flexible procurement and reduced stocking pressure. Multi-brand compatibility supports cost optimisation by allowing alternative insert suppliers to be used without altering the toolholder, which benefits purchasing and production planning in mixed-brand environments. Engineered for stable cutting and dependable service life With eight designated cutting edges and a robust interface, the component is engineered to damp vibration and maintain cutting geometry across repeated cycles. The 32 mm shank bore (aufnahme) ensures a secure fit in standard toolmounts while the compact overall length of 52 mm keeps overhang minimal. The result is a component that supports consistent cycle times and predictable tool change intervals in precision turning applications. Contact Metav Werkzeuge today to discuss how the Teknik Makina corner tool head T378TM with its 90° cutting geometry can be integrated into the existing toolset — call +49 2822 7131930 or email info@metav-werkzeuge.com to request advice or a customised parts list Technical data Article number: T378TM Manufacturer: Teknik Makina Designation: Corner tool head for LNMX 1510 indexable inserts ECLASS: 21181015 Core data Diameter: 100 mm Shank bore (aufnahme): 32 mm Overall length: 52 mm Weight: 1.644 kg Cutting angle: 90° Cutting edges: 8 Features Torx screw: M4x12.5 Torx key size: T15 Compatible with insert manufacturers: ISCAR, Korloy, LMN, YG-1 For LNMX 1510 indexable inserts FAQ Is the corner tool head compatible with LNMX 1510 inserts from different suppliers? The Corner tool head T378TM accepts LNMX 1510 indexable inserts and is compatible with manufacturers such as ISCAR, Korloy, LMN and YG-1, allowing use of equivalent insert grades from those suppliers. Which screw and key size are required for secure clamping? The Teknik Makina corner tool head T378TM uses a Torx M4x12.5 screw and requires a T15 key for correct tightening and repeatable clamping. What are the critical dimensions for toolholder mounting? Corner tool head T378TM specifies a 32 mm shank bore (aufnahme) and an overall length of 52 mm; the head diameter is 100 mm for enhanced stability. How many cutting edges does the holder support and what does that mean for productivity? The component features 8 cutting edges, enabling extended service intervals and stable cutting performance which contributes to predictable cycle times in serial machining. For which machining tasks is the holder best suited? The Corner tool head T378TM is designed for corner turning and facing operations where a 90° cutting angle and high positional stability are required to achieve precise corner radii and consistent surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Tool Holder For APKT 1604 Indexable Inserts, 90° Cutting Angle, M4x10 Torx Screw - Teknik Makina
Take advantage of a rigid 32 mm shank and a true 90° cutting angle to produce consistent square shoulders with fewer setups; the unit’s compatibility with APKT 1604 indexable inserts reduces tooling complexity and simplifies spare-part management. Order the head directly via Metav Werkzeuge or contact the consultants for application guidance. Eckmesserkopf — indexable angle head for APKT 1604 inserts, 90° cutting angle (Teknik Makina) The Eckmesserkopf is a compact indexable angle head designed for machining with APKT 1604 indexable inserts, offering a 90° cutting geometry and a 32 mm shank for stable mounting in standard holders 90° cutting angle for square shoulders Compatible with APKT 1604 indexable inserts Ø 100 mm head diameter 32 mm shank for standard toolholders Increased throughput from stable cutting geometry The angle head’s 90° cutting angle and substantial Ø 100 mm head deliver a predictable cutting direction beneficial for shoulder and face operations. This stable geometry reduces vibration and improves surface finish, which in turn diminishes rework and inspection times. Built for production runs, the assembly’s mass and form factor support consistent chip formation and tool life extension through controlled cutting forces. Practical handling and quick servicing for less downtime Designed with serviceability in mind, the head secures inserts with a Torx M4x10 screw and accepts a T15 key, enabling quick insert changes and repeatable clamping torque. Compatibility with Korloy APKT 1604 inserts lowers stocking requirements and speeds up replenishment cycles. The compact 52 mm overall length and clearly defined clamping interface make replacement simple, so machine availability is maximised and downtime is minimised. Robust construction for workshop reliability The component’s mass of 1.057 kg and the 32 mm shank combine to provide rigidity at the toolholder interface, improving cutting stability for demanding operations. The configuration supports seven cutting edges, which contributes to extended service life between regrinds or replacements and helps maintain consistent tolerances across batches. For plants seeking predictable performance from indexable tooling, the head is an efficient addition to a modular tooling strategy. Contact Metav Werkzeuge for precise application advice, reference Teknik Makina T188TM and arrange rapid delivery from our Emmerich warehouse via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number / SKU: T188TM Manufacturer: Teknik Makina Product name: Eckmesserkopf for APKT 1604 indexable inserts Torx screw: M4x10 Torx key: T15 Facts Head diameter: 100 mm Shank diameter (d): 32 mm Total length: 52 mm Weight: 1.057 kg Cutting angle: 90° Cutting edges: 7 Special features Compatible with APKT 1604 indexable inserts Suitable for inserts from Korloy Compact design for standard toolholders Quick-change insert clamping with Torx screw FAQ Which inserts fit this angle head? The angle head accepts APKT 1604 indexable inserts; it is specified for APKT 1604 geometry and is compatible with Korloy inserts as noted for Teknik Makina item T188TM. What shank size is required for mounting? A 32 mm shank diameter is specified for this head; the 32 mm dimension ensures compatible seating in standard holders and maintains rigidity during machining. How are the inserts secured and what tool is needed? Inserts are secured with a Torx M4x10 screw; a T15 Torx key is recommended for correct clamping and repeatable torque during insert changes. Is the head suitable for shoulder and face machining? Yes — the 90° cutting angle and robust head diameter are designed to produce square shoulders and face cuts with consistent surface quality using APKT 1604 inserts. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Tool Holder for LNGU 15T6 Indexable Inserts, 90° Cutting Angle, 8 Inserts, 32mm Shank - Teknik Makina
Combine the 90° cutting geometry, a 32 mm shank and compatibility with LNGU 15T6 indexable inserts to achieve repeatable corner turning and reduced setup times—order the component directly via Metav Werkzeuge or request technical advice from our consultants. Corner tool head by Teknik Makina — 90° cutting angle, for LNGU 15T6 indexable inserts A corner tool head engineered for precise external turning and cornering using LNGU 15T6 indexable inserts in standard 32 mm toolholders. 90° cutting angle for precise corner turning Compatible with LNGU 15T6 indexable inserts 32 mm shank diameter for common toolholders Secured with M4x11 Torx screw (T15) Built for precise geometry and consistent finishes The turning head is built around a 90° cutting angle, which keeps the cutting forces predictable and the tool path stable during cornering and profiling operations. Matching the geometry to the insert type—LNGU 15T6—ensures that each indexable face presents identical cutting geometry, so surface finish and dimensional repeatability are improved across batches. The design reduces the need for corrective rework and supports efficient production cycles by maintaining consistent edge engagement and chip control. Secure clamping and compact footprint for fast changeovers Mounting reliability is delivered via an M4x11 Torx screw tightened with a T15 drive, providing high clamping security for the insert seat without complex fixtures. The 32 mm shank offers a rigid connection to common toolholders, limiting deflection in interrupted cuts, while the compact overall length of 50 mm and a head diameter of 100 mm keep the assembly accessible in confined turning envelopes. The robust mass (approx. 1.933 kg) contributes to damping of vibration, improving both tool life and component quality during higher feed operations. Compatibility, workshop benefits and application focus Designed for indexable turning with LNGU 15T6 inserts and compatible with Kennametal insert geometries, the head suits operations such as corner turning, external profiling and small-step chamfering. Using an indexable insert system reduces tooling downtime and cost per edge compared with solid tooling, while the replacement routine is straightforward when the insert seat is secured by the Torx screw. The compact head supports versatile workshop deployment where space and changeover speed matter, helping to centralise tooling choices and streamline inventory. Contact Metav Werkzeuge for a tailored integration plan or to request a technical quote for the Teknik Makina corner tool head T961TM Technical data Article number: T961TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Suitable for indexable inserts: LNGU 15T6 Compatible insert manufacturer: Kennametal Facts Shank diameter: 32 mm Head diameter: 100 mm Cutting angle: 90° Number of cutting edges: 8 Overall length: 50 mm Weight: 1.933 kg Special features Secured with M4x11 Torx screw Torx key size: T15 Designed for indexable turning and corner machining Compact design for confined tool envelopes FAQ Which insert type fits this tool head? The head is designed for LNGU 15T6 indexable inserts, compatible with Kennametal-style geometries. What shank diameter is required for the toolholder? A 32 mm shank diameter is required; the head mounts into standard 32 mm toolholders. How is the insert secured in the tool head? The insert seat is clamped using an M4x11 Torx screw tightened with a T15 drive for secure and repeatable fixing. What operations is this head best suited for? Best suited for corner turning, external profiling and small chamfering tasks where a 90° cutting geometry is required. What is the article number for ordering and reference? Refer to article number T961TM when enquiring or ordering the corner tool head. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Tool Holder for LNGX 1307 Indexable Inserts, 90° Cutting Angle, 7 Edges, M4x10 Screw - Teknik Makina
Take advantage of a compact, high-stability turning head with a 90° cutting geometry and broad compatibility with LNGX 1307 indexable inserts; ideal where repeatable cornering and quick insert changes reduce cycle time. Order directly via Metav Werkzeuge or consult their specialists for application-specific guidance. Corner turning head T494TM – Indexable head for LNGX 1307 inserts, 90° cutting angle (Teknik Makina) The Corner turning head is a precision indexable head designed for cornering, facing and short-turn operations where stable clamping and reproducible geometry are essential Robust head for LNGX 1307 indexable inserts 90° cutting angle for precise corner operations 100 mm head diameter for stable cutting Torx M4x10 screw, T15 key required Greater process stability through compact geometry The head's Ø100 mm construction and 32 mm mounting diameter deliver a rigid connection to the tool post, reducing vibration and improving surface quality in interrupted and finishing cuts. The 90° cutting angle concentrates forces predictably, which supports consistent cycle times and reduces the need for rework. For workshop managers and CNC programmers, the result is fewer tool-related stoppages and a predictable machining outcome that aids planning and cost estimation. Fast insert changes and secure clamping for continuous production Designed for LNGX 1307 indexable inserts and compatible with inserts from Walter, the head ensures quick, repeatable indexation. Clamping is effected with a Torx M4x10 screw (requires a T15 key), so insert replacement is straightforward and tool life is maximised through correct seating. The head features seven cutting edges, allowing multiple repositions before replacement and reducing tooling consumption. This configuration supports efficient shift handovers and shorter maintenance windows. Application scope and workflow advantages With an overall length of 50 mm and a mass of 1.542 kg, the tool head is suited to medium-duty turning, cornering and facing operations on conventional and CNC lathes where compactness and repeatability matter. Compatibility with standard indexable inserts simplifies procurement and inventory: workshops can rely on common insert stocks while benefiting from the head's stable geometry. The combination of mechanical simplicity and standardised components makes this a pragmatic choice for production and job-shop environments seeking reliable throughput. For precise cornering with dependable clamping, choose Teknik Makina's Corner turning head and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data Article number: T494TM Manufacturer: Teknik Makina Designation: Corner turning head For: LNGX 1307 Indexable Inserts Numbers / Core technical data Head diameter: 100 mm Mounting diameter: 32 mm Overall length: 50 mm Weight: 1.542 kg Cutting angle: 90° Cutting edges: 7 Designs / Special features Suitable for Walter inserts Torx M4x10 screw T15 Torx key required Indexable insert system Compact, rigid geometry FAQ Which indexable inserts fit this head? The corner turning head is designed for LNGX 1307 indexable inserts and is compatible with inserts produced by Walter, ensuring standardised replacement and simple procurement. What clamping hardware is needed for insert changes? Insert clamping uses a Torx M4x10 screw; a T15 Torx key is required to secure and release the insert safely. Is the head suitable for CNC lathe operations? Yes, the compact geometry, Ø100 mm head diameter and 32 mm mounting diameter make it well suited to CNC and conventional lathe applications requiring stable cornering and facing. How many cutting positions are available before insert replacement? The assembly provides seven cutting edges, allowing multiple indexations per insert to extend service life and reduce tooling costs. Can the head be used for heavy roughing? The head is optimised for cornering, facing and medium-duty turning; for heavy roughing, tool selection should consider cutting forces and machine rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Tool Holder For WNMU 0806 Indexable Inserts, 90° Cutting Angle, M5x12 Torx Screw - Teknik Makina
Take advantage of a robust, precision-engineered solution that combines a 90° cutting angle with compatibility for WNMU 0806 indexable inserts, ensuring consistent shoulder turning and reliable repeatability. Order directly via Metav Werkzeuge or contact our consultants for application-specific advice. Angle tool head T546TM — Indexable insert holder for WNMU 0806, 90° cutting angle (Teknik Makina) The Angle tool head T546TM is an indexable insert holder designed for precise shoulder turning and external profiling, accepting WNMU 0806 inserts for industrial turning applications For WNMU 0806 indexable inserts 90° cutting angle for shoulder turning 32 mm tool shank diameter Torx M5x12 screw, T20 key required Stable geometry for consistent shoulder turning The holder’s defined 90° cutting angle and compact geometry deliver a repeatable contact position that stabilises each pass. With a 32 mm shank interface and a 100 mm head diameter, the unit is balanced to reduce vibration and improve tool life. The relatively modest overall length of 50 mm contributes to stiffness at the cutting zone, while the assembled mass of 1.36 kg helps dampen chatter during interrupted cuts. These attributes translate into more predictable component tolerances and fewer rejects in serial production Fast insert changes and broad insert compatibility Engineered for shops that value throughput, the tool accepts WNMU 0806 indexable inserts and is compatible with Kyocera plates, enabling straightforward standardisation across toolrooms. Fixing is performed with a Torx M5x12 screw and a T20 key, permitting quick insert replacement and minimised setup time. The clear interface reduces the risk of incorrect seating; as a result, changeover routines are faster and nightly tool-change windows are more predictable Robust design that reduces downtime A straightforward clamping concept and durable construction contribute to reduced downtime and stable machining cycles. The solid mechanical fixation and compact head geometry lower the need for frequent readjustment, which benefits continuous production environments. Where tool reliability is critical, this indexable insert holder supports sustained operation and predictable maintenance intervals, aligning with lean manufacturing demands Practical fitment and machining scope Ideal for shoulder turning, profiling and facing operations on conventional and CNC lathes, the holder functions as a practical addition to existing tool portfolios. The design focuses on dependable performance with industry-standard insert sizes, making it suitable for workshops seeking to streamline tooling stocks. For complex setups or unusual spindles, technical advice is available to ensure optimal integration into the machining process Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Teknik Makina T546TM angle tool head directly from our Emmerich centre Technical data Article number: T546TM Manufacturer: Teknik Makina Description: Angle tool head for WNMU 0806 indexable inserts Facts Shank diameter: 32 mm Head diameter: 100 mm Cutting angle: 90° Number of cutting edges: 6 Overall length: 50 mm Weight: 1.36 kg Torx screw: M5x12 Torx key: T20 Special features Compatible inserts: WNMU 0806 Compatible insert manufacturer: Kyocera Indexable insert holder design Suitable for shoulder turning and external profiling FAQ Which insert type fits this holder? The holder accepts WNMU 0806 indexable inserts, making it compatible with common industrial insert geometries Is the holder compatible with Kyocera inserts? Yes, the T546TM is listed as compatible with Kyocera WNMU 0806 inserts for standardised tool setups What tool is required for fixing the insert? Assembly uses a Torx M5x12 screw tightened with a T20 key for secure clamping Which operations is the holder best suited for? The unit is optimised for shoulder turning, facing and external profiling on lathes and CNC turning centres Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Cutting Angle 90° Indexable Turning Head For ANHX 1206 Indexable Inserts, M3.5x8.5 Torx T15 - Teknik Makina
Take advantage of the combination of robust build quality, a 90° cutting angle and a compact Ø 100 mm body to improve stability and reduce vibration during radial turning operations; order directly via Metav Werkzeuge or consult their technical team for application matching. T645TM Angle tool head by Teknik Makina — for ANHX 1206 indexable inserts, Ø 100 mm An T645TM angle tool head engineered for 90° turning tasks and compatible with ANHX 1206 indexable inserts, ideal for integration into CNC tool magazines and quick-change systems Ø 100 mm body diameter 90° cutting angle for radial operations Compatible with ANHX 1206 inserts (Palbit) Secure M3.5×8.5 Torx clamping Increased rigidity and consistent cutting performance The large Ø 100 mm diameter and compact overall length of 50 mm give the tool head a low overhang and a stiff mounting interface, which translates into more consistent chip formation and reduced chatter. With a 32 mm shank diameter for the clamping area and a mass of 1.761 kg, the component provides a stable platform for heavy intermittent cuts where rotary stability matters. The 90° configuration is particularly effective for radial facing and shoulder turning, because the geometry keeps cutting forces close to the spindle centre and minimises deflection for repeatable part tolerances. Rapid insert changes and secure clamping for minimal downtime Designed specifically for ANHX 1206 indexable inserts and recommended for Palbit grades, the head simplifies maintenance by using a single Torx clamping system. The clamping screw specification M3.5×8.5 (Torx T15) ensures a reliable, repeatable seat for each insert index; the fixed screw interface reduces the risk of incorrect tightening compared with multi-fastener systems. Quick indexing of the inserts means reduced tool-change time in batch production, supporting higher machine utilisation without compromising on cutting stability. Practical versatility for workshop and production use With 12 cutting edges available via indexable inserts and a true 90° cutting orientation, the tool head suits a range of conventional turning operations where radial cuts and facing are required. The compact dimensions enable installation in tighter turret pockets and on smaller lathes while still offering the mechanical integrity expected in industrial environments. The unit’s standardised insert interface streamlines supply chain handling and keeps tooling costs predictable by using established insert formats. Durable design tuned for industrial workflows The component’s construction focuses on serviceability and long-term fit in a production setting: a standardised 32 mm interface diameter and common Torx key size support easy assembly and torque control during reconditioning or replacement. The robust mass distribution and short overhang minimise wear progression on both holders and machine spindles, contributing to longer maintenance intervals. Documentation and parts traceability are straightforward thanks to the clear SKU labelling and standardised insert compatibility, which aids inventory management in busy workshops. For procurement or technical matching of the Teknik Makina T645TM angle tool head please contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange delivery and integration advice. Technical data Article number: T645TM Manufacturer: Teknik Makina Product: Eckmesserkopf for ANHX 1206 indexable inserts Dimensions & weight Diameter: 100 mm Overall length: 50 mm Shank / clamping diameter (D): 32 mm Weight: 1.761 kg Cutting angle: 90° Cutting edges: 12 Features & compatibility Compatible with ANHX 1206 indexable inserts Recommended insert manufacturer: Palbit Clamping screw: M3.5×8.5 (Torx) Torx key: T15 FAQ Which inserts fit this angle tool head? The angle tool head accepts ANHX 1206 indexable inserts; Palbit grades are recommended for standard workshop applications and are listed under the compatibility data. What is the effect of the 90° cutting angle in practice? A 90° cutting angle keeps cutting forces radial to the spindle, which reduces tool overhang effects and improves stability for facing and shoulder turning operations using the T645TM holder. How is the insert secured and which key is required? Inserts are secured with a single clamping screw M3.5×8.5, tightened with a T15 Torx key to ensure repeatable seating and straightforward replacement. Can the head be mounted in standard turrets? The holder’s 32 mm clamping diameter and compact 50 mm overall length make it suitable for many turret pockets and quick-change adaptations where space is limited. How many indexings are possible before replacement? Indexing frequency depends on cutting conditions and insert grade; the head accommodates the standard number of edges for ANHX 1206 inserts, effectively extending run time by enabling multiple index positions Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Cutter Head 8 Inserts 45° Cutting Angle 50mm Overall Length M4x10 Torx T15 - Teknik Makina
Achieve stable, high‑capacity face milling with a 100 mm diameter cutter head, eight cutting edges and a 45° cutting angle for efficient chip control; order the tool directly via Metav Werkzeuge or consult our application specialists for tailored advice. Face milling head T626TM – 100 mm diameter, for SNKX 1206 & ONHX 0505 indexable inserts (Teknik Makina) Face milling head T626TM is a compact, robust cutter head engineered for medium‑duty face milling operations using SNKX 1206 and ONHX 0505 indexable inserts. 100 mm diameter for broad cutting paths Compatible with SNKX 1206 inserts Eight cutting edges for extended tool life 45° cutting angle for efficient chip control Boosted material removal with efficient geometry The T626TM cutter head delivers increased productivity through its 100 mm diameter and 45° cutting geometry. The inclined cutting angle reduces radial forces and promotes a favourable chip thinning effect, which in practice means smoother surface finishes and more consistent material removal rates. For machining setups that rely on stable, repeatable passes, this geometry translates into fewer tool passes and a shorter cycle time per workpiece. Secure mounting and quick insert changes Designed with a 32 mm mounting bore and a compact overall length of 50 mm, the head offers mechanical rigidity that helps to dampen vibration. Insert clamping is handled with an M4x10 Torx screw tightened by a T15 key, allowing fast and secure insert replacement. Indexable inserts are reversible or replaceable cutting pieces mounted in the head, so worn edges can be rotated or swapped without replacing the whole tool, reducing downtime and lowering running costs. Broad compatibility for inventory flexibility The head accepts the SNKX 1206 insert format and is also compatible with ONHX 0505 Palbit alternatives, providing flexibility across supply chains. Using standardised insert systems simplifies stock management and enables rapid adaptation to differing cutting tasks. The provision of eight cutting edges across the assembly increases cumulative edge life before a full service or resharpening is required, supporting longer intervals between maintenance actions. Practical application and workshop advantages This cutter head is suited to workshops and production lines that employ indexable insert systems and require a balance between cutting area and machine load. The combination of a moderate overall mass (1.813 kg) and compact design helps maintain toolholder stability while remaining manageable for routine handling and setup changes. For operations prioritising reproducible results and straightforward maintenance, the head provides a reliable option that integrates with common insert suppliers. Contact Metav Werkzeuge for application guidance and to secure the Teknik Cutting Tools face milling head T626TM — Metav’s specialists in Emmerich will advise on insert choice, clamping and delivery options. Technical data Article number: T626TM Designation: Face milling head for SNKX 1206 and ONHX 0505 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 100 mm Cutting edges: 8 Overall length: 50 mm Mounting bore: 32 mm Weight: 1.813 kg Cutting angle: 45° Special features Compatible inserts: SNKX 1206 Alternative inserts: ONHX 0505 Palbit Torx screw: M4x10 Torx key size: T15 FAQ What insert types fit this cutter head? The face milling head accepts SNKX 1206 indexable inserts and can also be fitted with ONHX 0505 Palbit alternatives for greater sourcing flexibility. How is an insert secured in the head? Inserts are clamped with an M4x10 Torx screw using a T15 key; the fastening method on the T626TM ensures repeatable seating and reliable cutting performance. Which machines are suitable for this cutter head? The cutter head is intended for machines that support a 32 mm mounting bore and the SNKX/ONHX insert systems; it is optimised for medium‑duty face milling where a 100 mm diameter tool is appropriate. How does the 45° cutting angle affect machining? A 45° cutting angle reduces radial cutting forces and improves chip evacuation, which typically results in smoother surfaces and steadier cutting behaviour on successive passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Cutter Head For HNGX 0906 Indexable Inserts, 8 Teeth, 55° Cutting Angle, 32mm Mount - Teknik Makina
Take advantage of the combination of high stock removal capacity, secure Torx clamping and precise fit for HNGX 0906 indexable inserts to keep machining cycles efficient and predictable. Order directly via Metav Werkzeuge or contact our consultants for technical advice. Planmesserkopf — face milling head for HNGX 0906 indexable inserts, Ø100 mm, 8 cutting edges (Teknik Makina) The Planmesserkopf is a robust face milling head designed for medium- to heavy-duty machining with HNGX 0906 indexable inserts; suitable for production shops seeking reliable chip evacuation and repeatable mounting. Ø100 mm cutter head for efficient metal removal Secure Torx clamping with M4.5x11 screws Compatible with Pramet HNGX 0906 inserts 32 mm shank for rigid machine attachment Faster cycle times through optimised cutting geometry The cutter body combines an effective 55° cutting angle with eight evenly distributed cutting edges, enabling high metal removal rates while maintaining surface integrity. The geometry reduces cutting forces during engagement, which translates into shorter cycle times and steadier tool life. Using familiar indexable inserts such as HNGX 0906 ensures quick insert changes and predictable performance in series production. The result is a measurable increase in machining throughput without complex process changes. Easy, secure assembly and low downtime Mounting and maintenance are simplified by the use of M4.5x11 Torx screws and a T15 key interface, providing consistent torque and repeatable clamping. The 32 mm shank offers a rigid interface with common toolholders, reducing vibration and runout. When a cutting edge reaches wear limits, swaps are fast and straightforward thanks to standardised insert compatibility, which helps to keep machines running and reduces non-productive time. Reliable fitment and material compatibility for workshop workflows The tool is matched to Pramet insert dimensions and pocket form, ensuring correct seating and cutting orientation. With an outer diameter of Ø100 mm and an overall length of 50 mm, the head is compact enough for tighter set-ups yet large enough to provide aggressive engagement when required. The specified weight of 1.542 kg contributes to stable inertia on heavier spindles, supporting consistent cutting conditions across batches. Practical benefits for purchasing and process planning Selecting this face milling solution supports predictable inventory management due to its use of standard HNGX 0906 inserts and common Torx fastenings. The configuration is designed to integrate into existing tooling systems with minimal adaptation, lowering the barrier for shops looking to increase capacity. For procurement and technical validation, documentation and fitting details (including the T420TM SKU) are available to streamline selection and reduce specification uncertainty. For tailored advice on machine compatibility or to arrange prompt supply from Metav Werkzeuge in Emmerich, contact our team by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav’s specialists will advise on integration and ordering for the Teknik Cutting Tools face milling head (T420TM) Technical data SKU: T420TM Manufacturer: Teknik Makina Compatible inserts: HNGX 0906 Fastening screw: M4.5x11 (Torx T15) Core technical data Diameter: 100 mm Overall length: 50 mm Number of cutting edges: 8 Shank diameter (mount): 32 mm Weight: 1.542 kg Cutting angle: 55° Materials & features Compatible with Pramet indexable inserts Designed for HNGX 0906 inserts Torx screw size M4.5x11 Torx key T15 required Intended for face milling applications FAQ What inserts fit this milling head? The head is designed for HNGX 0906 indexable inserts; compatibility with Pramet dimensions ensures correct seating and expected cutting geometry for those inserts. Which screw and key are required for mounting the inserts? Mounting uses M4.5x11 Torx screws with a T15 key, providing secure and repeatable clamping for the insert pockets. Is this tool suitable for heavy stock removal? Yes — the combination of Ø100 mm diameter, 8 cutting edges and a 55° cutting angle supports medium to heavy stock removal while maintaining process stability. Which shank size is required on the toolholder? The tool uses a 32 mm shank, so a matching toolholder or arbor with a 32 mm reception is required for rigid mounting. Can the head be used in finishing operations? While optimised for robust face milling, the cutter can be used for semi-finishing when appropriate cutting parameters and the correct HNGX 0906 insert grade are selected. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Cutter Head For HNHX 1006 Indexable Inserts 55° Cutting Angle, 9 Inserts, M5x12 Torx T20 - Teknik Makina
Take advantage of a compact, reliable milling solution that combines a 100 mm diameter contact area, nine cutting edges and a secure 32 mm arbor for steady production runs; order via Metav Werkzeuge or request specialist application guidance from our consultants. Planing cutter head T474TM for HNHX 1006 indexable inserts — 100 mm diameter, 9 cutting edges (Teknik Makina) A robust Planing cutter head T474TM engineered for face milling with HNHX 1006 indexable inserts, offering controlled chip evacuation and repeatable seating for industrial machining tasks. 100 mm diameter for broad material contact Nine cutting edges for extended tool life 55° cutting angle for efficient chip removal 32 mm arbor interface, robust attachment Consistent cutting performance that supports throughput The 100 mm diameter contact area and the arrangement of nine cutting edges provide a balance between metal removal rate and insert life, enabling longer uninterrupted runs. A 55° cutting angle improves chip formation and reduces cutting forces, which helps preserve spindle life and maintain surface quality. Compatibility with HNHX 1006 indexable inserts — widely available from Taegutec — simplifies retooling and standardises inventory across workshops, delivering measurable efficiency gains on repeated face-milling operations. Quick, secure insert changes for reduced downtime Fast attachment and secure clamping are achieved with the supplied Torx fixation: M5x12 screws tightened with a T20 key ensure repeatable positioning of the cutting inserts and minimise setup time. The use of standardised fasteners reduces the risk of incorrect tools and supports predictable maintenance intervals. Together, these factors translate into shorter non-productive times and more parts produced per shift. Robust mounting and compact design for stable machining A 32 mm arbor interface and a compact overall length of 62 mm make the head suitable for tight setups while maintaining rigidity; the unit’s mass of 2.023 kg contributes to stability under load without overburdening the toolholder. The combination of a solid attachment diameter and carefully distributed mass improves vibration damping, which benefits surface finish and extends insert life in routine production environments. Practical compatibility and workshop benefits Designed for straightforward integration, the head accepts HNHX 1006 inserts and matches common Taegutec geometries, simplifying replacement logistics. The clear specification of fasteners and interface dimensions supports accurate tool planning and allows engineers to forecast inventory needs with confidence. For further technical clarification or application-specific recommendations, Metav Werkzeuge’s technical team can provide data sheets and machining advice to align the tool with process requirements. Contact Metav Werkzeuge for tailored application support and reliable supply from Emmerich to the workshop bench Technical data Article number: T474TM Designation: Planing cutter head for HNHX 1006 indexable inserts Manufacturer: Teknik Makina eClass: 21180902 SKU: T474TM Facts Diameter: 100 mm Number of cutting edges: 9 Cutting angle: 55° Arbor interface: 32 mm Overall length: 62 mm Weight: 2.023 kg Special features Compatible with Taegutec HNHX 1006 inserts Torx screw: M5x12 Torx key size: T20 Files available: migration references present FAQ Which inserts fit this cutter head? The head accepts HNHX 1006 indexable inserts; compatibility with Taegutec variants is indicated for the Planing cutter head T474TM (Teknik Makina, SKU T474TM). What arbor size is required for mounting? A 32 mm arbor interface is specified for secure mounting of the cutter head. Which screw and key are used to secure the inserts? Inserts are secured with M5x12 Torx screws using a T20 Torx key. What are the key dimensions to check before ordering? Check the 100 mm diameter, 32 mm arbor interface and the overall length of 62 mm to ensure proper fitment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Cutter Head For OFCR 0704 Indexable Inserts 43° Cutting Angle 8 Inserts 50mm Overall Length 32mm Shank - Teknik Makina
Benefit from robust build and precise cutting geometry: the combination of a 100 mm diameter, 8 indexed cutting edges and a 43° cutting angle delivers efficient material removal and a consistent surface finish while the BK300 clamping and M8x18 locking screw ensure secure mounting; order or request advice via Metav Werkzeuge for fast supply and technical consultancy. Planing cutter head — for OFCR 0704 Indexable Inserts, 100 mm, 8 edges (Teknik Makina) A Planing cutter head engineered for high-efficiency face planning and surface finishing in turning and milling setups, compatible with OFCR 0704 indexable inserts 100 mm cutting diameter 8 indexed cutting edges 43° cutting angle for efficient material removal BK300 clamping interface, 32 mm bore Reliable surface quality from optimised cutter geometry The robust geometry of this cutter head focuses on delivering repeatable results in planing operations. With a 43° cutting angle and 8 indexed cutting edges, the design reduces cutting forces and improves chip evacuation, which leads to steadier feeds and a more uniform finish. The 100 mm diameter provides a wide cutting envelope for faster coverage of large surfaces, while compatibility with OFCR 0704 inserts keeps insert handling straightforward for both production workshops and maintenance teams. This combination targets higher throughput and lower scrap rates by converting geometric advantages into measurable productivity gains. Stable mounting and low-vibration operation for precise cuts Mounting stability is crucial to translate tool geometry into real-world accuracy. The cutter head features a BK300 clamping interface and a 32 mm bore for solid seating on standard toolholders, while the M8x18 locking screw secures the assembly against axial slip. Adjustment and tightening are performed with a 4 mm Allen key, ensuring consistent torque and reducing setup variability. The result is reduced vibration, longer insert life and fewer reworks — tangible benefits for workshops that must maintain tight tolerances under continuous use. Service-friendly design that reduces downtime Maintenance is simplified by the use of indexable inserts and a compact, pragmatic assembly. The head’s 8 cutting edges allow multiple index positions before replacement, and the compact overall length of 50 mm and mass of 1.654 kg make handling and tool changes quick and safe at the bench or on the machine turret. The modular nature of the insert system supports fast turnarounds during shift changes, while the clear mechanical interface minimises the need for specialised tooling. For operations seeking to balance machine uptime with ease of service, this cutter head offers a practical route to sustained performance. For reliable face‑planning performance from Teknik Makina, contact Metav Werkzeuge in Emmerich for tailored advice and rapid supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T266TM Manufacturer: Teknik Makina ECLASS: 21180902 Product name: Planing cutter head (for OFCR 0704 Indexable Inserts) Core specifications Diameter: 100 mm Cutting edges: 8 Cutting angle: 43° Bore / shaft diameter: 32 mm Overall length: 50 mm Weight: 1.654 kg Features & compatibility For OFCR 0704 indexable inserts BK300 clamping interface M8x18 locking screw Operated with 4 mm Allen key FAQ Which indexable inserts fit this cutter head? The cutter head accepts OFCR 0704 indexable inserts; this specification ensures correct seating and cutting geometry for the tool. What clamping interface is required for mounting? Mounting requires a BK300 clamping interface with a 32 mm bore and the M8x18 locking screw to secure the head. How many usable cutting positions are available before insert replacement? With 8 indexed cutting edges, the head allows multiple index positions per insert, extending service intervals and reducing downtime. Is special tooling needed for adjustment and tightening? Adjustment is performed using a 4 mm Allen key for the locking screw; no additional specialised tools are required for routine maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Cutter Head For ONMU 0505 Indexable Inserts 45° Cutting Angle, 8 Cuts, M5x12 Torx Screw - Teknik Makina
Benefit from a robust combination of compatibility with ONMU 0505 indexable inserts, a compact Ø100 mm cutter diameter and secure M5x12 Torx clamping for consistent face-milling performance. Order the cutter head directly via Metav Werkzeuge or consult our specialists for application advice. Face-milling head T798TM — Face-milling head for ONMU 0505 indexable inserts, Ø100 mm, 45° cutting angle (Teknik Cutting Tools) A face-milling head engineered for efficient finishing and stable material removal in medium- to heavy-duty milling operations, compatible with ONMU 0505 indexable inserts Face-milling head for ONMU 0505 indexable inserts Ø 100 mm cutter diameter, 45° cutting angle Holds 8 cutting edges, sturdy M5x12 Torx clamping 32 mm shank diameter, weight 1.842 kg Faster setup through proven insert compatibility The T798TM face-milling head is designed around the widely used ONMU 0505 indexable inserts, enabling predictable cutting behaviour and quick insert replacement. Compatibility with ISCAR inserts reduces the need for special tooling inventories and shortens setup time in mixed-vendor environments. The secure M5x12 Torx clamping, operated with a T20 key, provides repeatable clamping torque and straightforward maintenance — the result is reduced downtime and a dependable production rhythm. Improved surface finish with optimised cutting geometry A 45° cutting angle combined with a Ø100 mm cutter body produces a favourable chip flow and reduced cutting forces, which helps to lower vibration and improve surface quality on the workpiece. The head accommodates 8 cutting edges, distributing load and enabling consistent material removal across the cutting path. For shops seeking a balance between material removal rate and finish quality, this geometry supports smoother feeds and extended insert life, translating into fewer tool changes and steadier cycle times. Robust interface for stable machining and easy integration With a 32 mm shank diameter and a compact overall length of 52 mm, the cutter head offers a rigid interface that minimises runout when mounted in the spindle or arbor. The unit weight of 1.842 kg contributes to stable rotary inertia during face milling, particularly on larger-diameter passes. Precision clamping combined with the standardised insert pocket means the head integrates cleanly into existing toolsets and can be applied across a range of common milling tasks without extensive requalification. Practical benefits for workshop efficiency Choosing this cutter head supports streamlined tooling management and predictable process outcomes. The use of standard indexable inserts simplifies stocking and replacement, while the mechanical design focuses on durability and repeatable performance. For production environments where consistency and uptime matter, the cutter body delivers tangible improvements in handling and reliability. Contact Metav Werkzeuge for supply and tailored application guidance on the Teknik Cutting Tools face-milling head T798TM — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T798TM Designation: Face-milling head for ONMU 0505 indexable inserts Manufacturer: Teknik Makina Compatible inserts: ONMU 0505 (ISCAR) Facts Diameter: 100 mm Shank diameter: 32 mm Weight: 1.842 kg Cutting angle: 45° Number of cutting edges: 8 Overall length: 52 mm Special features Torx clamping screw M5x12 Torx key T20 Designed for face-milling applications Compatible with ISCAR ONMU 0505 indexable inserts FAQ Which indexable inserts fit the cutter head? The face-milling head accepts ONMU 0505 indexable inserts; it is compatible with inserts from ISCAR, providing a standardised fitting and predictable performance. How is the insert secured in the head? Inserts are clamped with an M5x12 Torx screw tightened with a T20 key, which ensures repeatable clamping and simple maintenance of the cutter head. What diameter and cutting angle does the head offer? The cutter body has a 100 mm diameter and a 45° cutting angle, a combination that balances material removal with surface finish quality. Is the head suitable for heavy-duty milling? The rigid 32 mm shank and the unit weight of 1.842 kg provide a stable mounting and sufficient inertia for many medium- to heavy-duty face-milling tasks, depending on machine and process parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com