Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
101.6mm Corner Turning Head for TPKN 1603-2204 Indexable Inserts, 90° Cutting Angle - Teknik Makina
Take advantage of a robust design with a 90° cutting angle and compatibility with TPKN 2204 indexable inserts to secure consistent shoulder milling and fast insert changes. Order through Metav Werkzeuge for reliable supply or consult the technical team for specification support. Corner cutter head — indexable corner cutter head, Ø250 mm, 90° cutting angle (Teknik Makina) The corner cutter head is a precision milling head engineered for indexable-insert operations, designed to accommodate TPKN 1603–2204 inserts for productive shoulder and face milling in workshop and production environments Compatible with TPKN 2204 inserts 90° cutting angle for consistent shoulders Ø250 mm diameter for broad removal 60 mm bore for standard toolholders Consistent shoulder quality through defined geometry The robust geometry of this milling head ensures reproducible shoulder faces by combining a 90° cutting angle with support for TPKN 2204 indexable inserts. The result is predictable cutting behaviour and reduced rework: the arrangement of cutting edges stabilises the contact zone, which helps to maintain surface quality across repeated operations. This stability benefits setups where repeatability and process control are priorities, as the head’s design reduces the need for frequent fixture adjustments. Secure clamping and straightforward maintenance A sizeable 60 mm bore and defined fastening hardware such as the M8x24 locking screw and M4x10 socket screw give a secure connection to compatible spindles and adaptors, while the TA012 clamp plate aids precise insert seating. The assembly is maintained with a 5 mm Allen key, simplifying routine insert changes and reducing time at the machine. The assembly mass of 8.166 kg contributes to rotational stability, lowering vibration and supporting longer tool life when used within appropriate operating parameters. High material removal potential with balanced cutting Equipped with 9 cutting edges and an effective Ø250 mm diameter, the tool body provides balanced cutting action for larger section passes. The compact 62 mm overall length keeps the cutter close to the spindle, improving rigidity for demanding passes. Multiple edges distribute cutting forces, which helps to moderate peak loads on individual inserts and can lead to steadier cycle times during heavier machining sequences. Compatibility, identification and planning for integration The head is supplied under SKU T113TM and originates from Teknik Makina, enabling straightforward procurement and traceability for inventory management. The standardised clamp and screw sizes make it compatible with many common toolholder systems; planners can therefore integrate the component into existing tool sets with minimal adapter requirements. If further dimensional verification or balancing data is needed for machine-specific integration, Metav Werkzeuge’s technical advisers can provide clarifications to support planning and setup. For supply and expert advice on using the Teknik Cutting Tools corner cutter head T113TM in specific machining setups, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T113TM Brand: Teknik Makina Designation: Corner cutter head (Eckmesserkopf) For inserts: for TPKN 1603-2204 Indexable Inserts Numbers / Core technical data Diameter: 250 mm Mount bore (D): 60 mm Overall length: 62 mm Weight: 8.166 kg Cutting angle: 90° Cutting edges: 9 Design / Special features Compatible inserts: TPKN 2204 Locking screw: M8x24 Socket screw: M4x10 Clamp plate: TA012 Allen key size: 5 FAQ Which inserts are compatible with this cutter head? The cutter head accepts TPKN 1603–2204 indexable inserts; compatibility is indicated under SKU T113TM and by the Teknik Makina designation. What are the key mounting dimensions to check before installation? Confirm the 60 mm mount bore and a machine interface suited to a Ø250 mm cutter, plus the required securement for an 8.166 kg assembly. How many cutting edges does the head provide and what is the effect? The tool body features 9 cutting edges, which helps to balance cutting forces and support steady material removal on broader passes. Which fasteners and tools are needed for insert changes? Insert retention uses an M8x24 locking screw and M4x10 socket screws; a 5 mm Allen key is specified for routine maintenance. Can this cutter head be identified for procurement and traceability? Yes — order and reference by SKU T113TM and brand Teknik Makina for consistent sourcing and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm 90° Corner Tool Holder For R390-1806 Indexable Inserts, 8 Cutting Edges, M4x11 Torx Screw - Teknik Makina
Benefit from the combination of robust rigidity and precise geometry: the holder provides a 90° cutting angle, an effective 125 mm diameter and eight cutting edges for stable shoulder operations; procure the item via Metav Werkzeuge or consult the specialists for integration support. Corner tool head T430TM — indexable insert holder, 125 mm diameter, 90° cutting angle (Teknik Makina) Corner tool head T430TM is an indexable insert holder engineered for turning and face operations, intended for use with R390-1806 indexable inserts in demanding production environments. 125 mm diameter for wide-reaching cuts 90° cutting angle for precise shoulder cuts 40 mm shank diameter for secure clamping Compatible with Sandvik R390-1806 inserts High rigidity for consistent, high-quality cuts The design delivers a predictable cutting geometry based on a 90° cutting angle, which helps maintain dimensional consistency when forming shoulders or square features. The large 125 mm head diameter and the distribution of eight cutting edges increase stability and reduce vibration during interrupted cuts. Such geometry is especially useful in batch production where repeatability matters; users benefit from fewer reworks and improved cycle-time stability thanks to the holder's mechanical stiffness and balanced load distribution. Straightforward mounting and secure clamping for quick tool changes Installation relies on standard fastenings and a robust clamping interface: the holder uses a M4x11 Torx screw tightened with a T15 key, and presents a 40 mm shank diameter for firm seating in common tool posts or turrets. This configuration permits fast, reproducible set-ups and reduces downtime during insert changes or re-indexing. The straightforward fixing method is compatible with common workshop workflows, enabling maintenance teams to swap inserts and resume machining with minimal adjustment effort. Engineered compatibility and dependable weight-to-rigidity ratio Designed specifically for R390-1806 indexable inserts from Sandvik, the tool head integrates with established insert geometries to exploit chip control and edge life. The component's mass of 3.558 kg and compact overall length of 62 mm contribute to a favourable rigidity-to-overhang balance, supporting heavier cuts without excessive deflection. Specified tolerances and the selection of fastening hardware provide a basis for long-term reliability in series production or demanding single-part manufacture. For specification checks, fixture compatibility or to arrange procurement of the Teknik Cutting Tools corner tool head T430TM for Sandvik R390-1806 inserts, contact Metav Werkzeuge and benefit from expert advice and supply from Emmerich. Technical data Article number: T430TM Manufacturer: Teknik Makina Product name: Corner tool head Designation: for R390-1806 Indexable Inserts Compatible insert manufacturer: Sandvik Facts Weight: 3.558 kg Shank diameter: 40 mm Head diameter: 125 mm Number of cutting edges: 8 Overall length: 62 mm Cutting angle: 90° Special features Torx screw: M4x11 Torx key: T15 Fits R390-1806 indexable inserts Robust holder design for shoulder operations FAQ Which inserts are compatible with this holder? The corner tool head T430TM is designed for use with R390-1806 indexable inserts and is listed as compatible with Sandvik insert geometries. What fastening hardware is required for mounting? Mounting uses an M4x11 Torx screw and requires a T15 key; these specifications are standard for the T430TM and ensure secure clamping. What shank diameter is required in the tool post? The T430TM has a 40 mm shank diameter, which should be matched by the machine's tool holder or adapter to achieve correct seating and rigidity. How many cutting edges does the head provide and what is the benefit? The holder features eight cutting edges; this distribution enhances stability and aids in even wear distribution during shoulder machining. What are the dimensional attributes to consider for fixture planning? Key dimensions for planning are the 125 mm head diameter, overall length of 62 mm and the 40 mm shank diameter of the T430TM; these values guide clearance and overhang calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm 90° Corner Turning Head For LNMX 1510 Indexable Inserts, M4x12.5 Torx T15 - Teknik Makina
Take advantage of a stable 90° cutting geometry and broad compatibility with LNMX 1510 indexable inserts for reliable shoulder machining; the robust 40 mm shank and Ø125 construction ensure secure clamping and steady cuts. Order directly via Metav Werkzeuge or contact their consultants for specification support. Corner Turning Head T380TM — for LNMX 1510 indexable inserts, 90° cutting angle (Teknik Makina) A robust Corner Turning Head T380TM designed for precise shoulder and form turning in conventional lathe applications with LNMX 1510 indexable inserts 90° cutting angle for shoulder machining Compatible with LNMX 1510 indexable inserts 40 mm shank diameter for secure clamping Torx M4x12.5 fastening, key T15 Consistent shoulder profiles with defined 90° geometry The 90° cutting geometry provides a repeatable machining stance for shoulder faces and square shoulders, reducing secondary operations and setup time. With support for LNMX 1510 indexable inserts, the turning head delivers a cost-effective solution through rapid indexability; worn edges are rotated rather than replaced, which improves process economy. This arrangement suits mixed-batch production where predictable edge positioning and fast reconditioning matter. Stable clamping for vibration reduction and tool life A 40 mm shank diameter and substantial Ø125 head diameter combine to provide rigidity at the toolpost, which lowers vibration and improves surface finish. The tool head uses a Torx M4x12.5 fastening and T15 key specification for secure insert retention, simplifying maintenance and repeatable reassembly. The solid design, with an overall length of 63 mm and a mass of 3.65 kg, contributes to steadier cutting conditions and reduced risk of chatter in medium-duty turning operations. Broad compatibility eases tool sourcing and inventory Designed for LNMX-format inserts, the head accepts inserts from major manufacturers (ISCAR, Korloy, LMN, YG-1), enabling flexibility in procurement and the use of preferred grades and coatings. The tool head supports indexable inserts with multiple cutting edges—this reduces overall tooling cost per part in production environments where indexed reuse is standard. Integration into existing toollines is straightforward thanks to familiar insert geometry and clamping conventions. Quick maintenance and reliable integration into production Routine service is straightforward: the Torx fastening is industry-standard, and insert changes are fast, letting operators return to machining with minimal downtime. The head’s dimensions and fastening pattern align with common toolholder setups, facilitating rapid adoption without elaborate adapters. For production managers, this means higher machine uptime and a predictable maintenance cadence, supporting continuous operation and planning. Discuss technical integration and order options with Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice on the T380TM corner turning head Technical Data Article number: T380TM Manufacturer: Teknik Makina Designation: Corner turning head for LNMX 1510 indexable inserts Data Diameter: 125 mm Shank diameter (aufnahme): 40 mm Overall length: 63 mm Weight: 3.65 kg Cutting angle: 90° Number of cutting edges: 10 Torx screw: M4x12.5 Special features Compatible with LNMX 1510 indexable inserts Suitable insert manufacturers: ISCAR, Korloy, LMN, YG-1 Torx key size: T15 ECLASS: 21181015 FAQ What insert type does the tool head accept? The turning head accepts LNMX 1510 indexable inserts and is compatible with inserts from ISCAR, Korloy, LMN and YG-1. Is the fastening hardware standardised? Yes. The head uses a Torx M4x12.5 fastening with a T15 key specification for secure clamping. What are the key dimensions for machine setup? Key dimensions are Ø125 mm head diameter, 40 mm shank diameter and 63 mm overall length, which should be checked against the toolpost clearance. How does the 90° cutting angle benefit production? A 90° cutting angle ensures consistent shoulder profiles and simplifies alignment for square shoulder and face turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Cutter Head For AP-- 1604 Indexable Inserts Internal Coolant, 90° - Teknik Makina
Combining a robust 125 mm diameter, a true 90° cutting angle and integrated internal coolant delivers stable, repeatable performance for demanding machining tasks; benefit from precise insert seating and reduced thermal wear. Order the tool directly via Metav Werkzeuge or consult the technical specialists for suitability and delivery. Corner Indexable Head T190-1TM — 125 mm, internal coolant (Teknik Makina) A compact Corner Indexable Head engineered for AP-- 1604 indexable inserts, optimised for right‑angle machining where coolant-fed cutting and compact assembly are required 125 mm diameter for wide engagement Internal coolant for improved tool life Compatible with AP-- 1604 Korloy inserts 90° cutting angle for precise shoulder work Stable cutting performance for continuous machining The Corner Indexable Head is built to translate tool geometry into consistent results: the 125 mm tool body with a 90° cutting angle positions inserts for square shoulder cuts and firm contact, while the arrangement of 9 cutting edges distributes cutting forces to reduce vibration. This configuration supports longer uninterrupted cycles, improving productivity and delivering reliable dimensional outcomes. The presence of internal coolant further stabilises temperatures at the cutting zone, helping to maintain surface quality and insert life. Serviceable, maintenance-friendly design reduces downtime A maintenance-conscious layout simplifies routine interventions. Fastening uses M4x10 Torx screws secured with a T15 key, enabling quick insert changes and repeatable clamping without special tooling. Compatibility with Korloy AP-- 1604 indexable inserts streamlines inventory and procurement, allowing stock consolidation for carbide grades and geometries already in use. Clear mechanical interfaces and standard screw sizes reduce downtime during tool swaps and setup adjustments. Compact integration for precise setups in confined spaces At an overall length of 62 mm and with a 40 mm shank diameter, this head offers a compact footprint suited to tight fixturing and limited overhangs; the relatively low mass of 3.642 kg aids handling during tool changes and contributes to predictable dynamic behaviour on the spindle. The unit is supplied as SKU T190-1TM by Teknik Makina, making identification straightforward for ordering and tool management. The compact geometry supports accessible toolpaths and repeatable alignment within clustered tool arrangements. Discuss the T190-1TM with Metav Werkzeuge to confirm fitment, lead times and compatible insert grades — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and procurement from our Emmerich warehouse Technical Data Article number: T190-1TM Product type: Corner indexable head Manufacturer: Teknik Makina Compatible inserts: AP-- 1604 Compatible insert maker: Korloy Facts Diameter: 125 mm Overall length: 62 mm Shank diameter: 40 mm Weight: 3.642 kg Cutting angle: 90° Cutting edges: 9 ECLASS: 21181015 Special features Internal coolant: yes Torx screw: M4x10 Torx key: T15 Label: 125mm Eckmesserkopf AP-- 1604 L62mm mit Innenkühlung Description (EN): for AP-- 1604 Indexable Inserts FAQ Which indexable inserts fit this head? The head accepts AP-- 1604 indexable inserts; Korloy AP-- 1604 inserts are listed as compatible with the T190-1TM. Does the head provide internal coolant to the cutting zone? Yes — the T190-1TM features internal coolant channels to support cooling at the tool-tooth interface and help extend insert life. What fastening hardware is required for insert clamping? Insert clamping uses M4x10 screws tightened with a Torx T15 key as specified for the T190-1TM. Is this head suitable for square shoulder operations? Yes — with a 90° cutting angle and the insert geometry for AP-- 1604, the head is configured for precise shoulder and right‑angle machining. How can the SKU be used for ordering or stock management? Reference SKU T190-1TM when ordering or checking stock to ensure the correct Corner Indexable Head and configuration are supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Cutter Head for XOMX 1204 Indexable Inserts, 90° Cutting Angle, 12 Cutting Edges, 40mm Shank - Teknik Makina
Benefit from a rigid, high‑stability design with a 90° cutting angle and Ø125 mm diameter for consistent square‑shoulder machining; order the corner tool head via Metav Werkzeuge or consult their specialists for process integration. Corner tool head T519TM — for XOMX 1204 indexable inserts, Ø125, 90° (Teknik Cutting Tools) A robust corner tool head T519TM engineered for precision square‑shoulder and face operations using XOMX 1204 indexable inserts; suitable for medium‑ to heavy‑duty turning and milling tasks in production workshops Heavy‑duty 125 mm diameter head 90° cutting angle for square shoulder cuts Compatible with XOMX 1204 indexable inserts Secured with M3.5x8.5 Torx screw, T10 key Stability and repeatability for productive machining Built with a large Ø125 mm head and a defined 90° cutting geometry, this clamping solution delivers consistent contact and reduced deflection on interrupted cuts. The substantial mass and geometric arrangement translate into improved surface quality and dimensional stability across series production. For workshops seeking to reduce rework and scrap rates, the rigid design supports predictable tool life and machining outcomes. Quick clamping and reliable insert retention Clamping is performed with a M3.5x8.5 Torx screw operated by a T10 key, providing secure, repeatable retention of the insert during high‑load operations. Compatibility with XOMX 1204 inserts and established manufacturers such as SECO ensures a wide choice of grades and geometries, simplifying tool‑set standardisation and spare‑parts logistics. The straightforward screw‑based fastening shortens changeover times and reduces downtime on the shop floor. Installation and mechanical integration simplified Designed for a 40 mm mounting bore (40 mm) and an overall length of 62 mm, the head fits commonly used toolholders and post configurations without extensive adapter work. With a mass of 3.565 kg, balance considerations are advised for high‑speed spindles, but the weight contributes to damping and steady cutting behaviour where stability is prioritised. Planning with these fixed dimensions eases fixture design and cycle‑time calculations. Application scope and operational benefits Equipped with 12 cutting edges and a square configuration suitable for face and shoulder cuts, this head is tailored for shops that prioritise reliable part geometry over extreme light‑cutting strategies. The combination of a defined cutting angle, standard insert format and proven fastening method supports both single‑piece flow and batch production. The result is fewer tool interventions and a more predictable production rhythm. For application guidance and availability of the Teknik Cutting Tools corner tool head T519TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T519TM Manufacturer: Teknik Makina Designation: Corner tool head for XOMX 1204 indexable inserts Core measurements Diameter: 125 mm Mounting bore: 40 mm Overall length: 62 mm Cutting angle: 90° Cutting edges: 12 Weight: 3.565 kg Materials & features Compatible inserts: XOMX 1204 Compatible insert manufacturer: SECO Fastening: Torx screw M3.5x8.5 Torx key size: T10 Story trigger: eckmesserkopf FAQ Which insert type fits this head? The corner tool head accepts XOMX 1204 indexable inserts; insert grades and geometries from manufacturers such as SECO can be used depending on the application. What are the main mounting dimensions to check? Check the 40 mm mounting bore and the 62 mm overall length to ensure compatibility with existing toolholders and posts. How is the insert secured in the head? Retention is via a M3.5x8.5 Torx screw tightened with a T10 key, providing repeatable clamping for production use. Is this head suitable for heavy interrupted cuts? The large Ø125 mm head and robust construction make it well suited to operations where stability and deflection control are priorities. Does the head require balancing for high‑speed use? At 3.565 kg, dynamic balance should be verified for high‑speed spindles; the mass improves damping but shop‑specific balancing is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Cutter Head R390 18 For Indexable Inserts L62mm With Internal Coolant - Teknik Makina
Take advantage of the combination of internal coolant, proven Sandvik R390 18 compatibility and a rigid 125 mm diameter design for stable turning operations; order directly via Metav Werkzeuge or contact our consultants for application advice. Corner turning head — for R390 18 indexable inserts, 125 mm diameter, internal coolant (Teknik Makina) Corner turning head designed for precision turning tasks in production and workshop environments, compatible with R390 18 indexable inserts and optimised for coolant-through operation 125 mm diameter for extended reach Internal coolant feed for reliable chip control Compatible with Sandvik R390 18 inserts Robust design, 8 effective cutting edges Enhance machining stability and throughput with a rigid 125 mm solution The corner turning head delivers consistent performance for shoulder and groove turning where rigidity matters. The 125 mm diameter increases the tool overhang capacity while maintaining stiffness, reducing chatter and allowing higher material removal rates. A 90° cutting angle provides straightforward geometry for right-angle operations, and the use of R390 18 indexable inserts simplifies tool maintenance: inserts are indexed or replaced without complex reclamping, cutting downtime and component handling. These characteristics translate into measurable productivity gains at the machine spindle and a predictable cycle time for batch production. Simplified setup and coolant-assisted tool life Integration into existing tool posts is fast thanks to the standard 40 mm shank and compact profile. The 40 mm shank and 62 mm overall length balance access and stability, keeping set-up adjustments to a minimum. Internal coolant feed is delivered directly to the cutting zone: internal coolant improves chip evacuation, reduces built-up edge and extends insert life, particularly on difficult-to-machine alloys. Fixing is straightforward with T15 Torx drive and M4x10 screws, ensuring repeatable clamp forces and secure insert retention. Compatibility with Sandvik insert geometry means familiar grades and edge forms can be used straight away, avoiding trial-and-error testing. Designed for reliability and predictable production A compact yet substantial mass contributes to vibration damping and positional stability during heavy cuts; the tool head’s balance and 3.558 kg mass support smoother cuts under load. With 8 cutting edges available from the installed inserts, maintenance intervals are extended and tool costs per part are reduced. The overall result is precision and repeatability across runs, making the holder suitable for serial turning applications and mixed-production shops that require consistent surface finish and dimensional control. The robust construction also supports quick index changes and straightforward tool reconditioning. Contact Metav Werkzeuge in Emmerich for a compatibility check or technical quote for this Teknik Makina corner turning head (SKU T430-1TM); email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: T430-1TM Manufacturer: Teknik Makina Product type: Corner turning head Description: for R390 18 indexable inserts (Sandvik compatibility) Core dimensions Diameter: 125 mm Shank diameter: 40 mm Overall length: 62 mm Weight: 3.558 kg Cutting angle: 90° Features & fittings Internal coolant Compatible with Sandvik R390 18 inserts Cutting edges: 8 Torx key: T15 Torx screw: M4x10 FAQ Which insert series fits this tool? The tool accepts R390 18 indexable inserts and is finished for Sandvik-compatible insert geometry, making the insert selection straightforward for established turning grades. Is the coolant routed to the cutting edge? Yes — internal coolant supplies coolant directly to the cutting zone, improving chip removal and insert life for the Teknik Makina corner turning head (SKU T430-1TM). What shank and overall dimensions does it require? The holder uses a 40 mm shank with a 62 mm overall length, designed for standard tool post interfaces and compact installation in turning centres. How many effective cutting edges are available per setup? The assembly supports the indexed insert layout delivering 8 cutting edges, extending service intervals and reducing per-part tool cost. Which fixation hardware is required for insert replacement? Insert clamping uses T15 Torx drive with M4x10 screws for secure and repeatable fastening in everyday workshop practice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Cutting Head for ADKT 1706 Indexable Inserts L63mm With Internal Coolant, 90° - Teknik Makina
Take advantage of a robust combination of rigidity, coolant-fed chip control and secure clamping to maintain steady turning cycles; the 125 mm diameter and internal coolant ensure longer insert life and consistent surface quality. Order supply and technical advice are available via Metav Werkzeuge for seamless integration into existing tool holders. Corner tool head T592-3TM — 125 mm angle head with internal coolant (for ADKT 1706 Indexable Inserts) The Corner tool head T592-3TM is a precision-fit angle head designed for turning operations with ADKT 1706 indexable inserts, engineered to deliver stable cutting and reliable coolant delivery in demanding production environments. 125 mm diameter for high rigidity Internal coolant for improved insert life Compatible with ADKT 1706 indexable inserts Secure Torx clamping with M4x10 screws Stable cutting geometry for consistent finishing The tool head offers a 125 mm diameter body and a precisely set 90° cutting angle, delivering enhanced rigidity during interrupted and continuous cuts. This geometry, combined with 8 cutting edges, reduces vibration and promotes repeatable surface finish quality across batch production. The design supports high reproducibility in component dimensions, which is essential when tolerances are tight and process stability is required. The result is fewer reworks and a steadier machine utilisation rate. Internal coolant for extended insert life and reliable chip control Equipped with internal coolant, the unit channels cutting fluid directly to the cutting zone, supporting efficient heat dissipation and improved chip evacuation. When used with ADKT 1706 inserts from Korloy, the focused coolant flow helps to moderate cutting temperatures and reduces built-up edge formation, extending tool life and maintaining consistent cycle times. For workshops aiming to lower tooling consumption and increase uptime, the coolant-fed configuration translates directly into lower overall operating costs. Quick serviceability and secure fastening to reduce downtime Maintenance and insert changes are simplified by standardised fastening: Torx T15 driver engagement with M4x10 screws ensures fast, reliable clamping and easy repeatability after reassembly. The compact L63 mm overall length keeps the cutting centre close to the holder, improving stiffness, while a manageable mass of 2.89 kg provides a balance between robustness and installation convenience. These characteristics support efficient tool changeovers and predictable machining behaviour in mixed-production environments where throughput and flexibility matter. Discuss compatibility and supply with Metav Werkzeuge — request a tailored quote or technical check for Teknik Makina's corner tool head T592-3TM, supplied directly from our Emmerich hub. Technical data SKU: T592-3TM Label: 125mm Eckmesserkopf ADKT 1706 L63mm mit Innenkühlung Product type: Corner tool head Facts Diameter: 125 mm Overall length: 63 mm Weight: 2.89 kg Cutting edges: 8 Cutting angle: 90° Torx key: T15 Torx screw: M4x10 Special features Internal coolant: yes Suitable for indexable inserts: ADKT 1706 Compatible insert manufacturer: Korloy Manufacturer: Teknik Makina SKU/UID: T592-3TM / T592-3TM FAQ What inserts fit this corner tool head? The corner tool head T592-3TM is designed for ADKT 1706 indexable inserts; compatibility with Korloy-manufactured ADKT 1706 inserts is specified for optimal fit. Does the tool head provide internal coolant delivery? Yes, the T592-3TM features internal coolant to the cutting zone, aiding heat control and chip evacuation during turning operations. Which fastening system is used for insert clamping? Clamping is via M4x10 Torx screws with a T15 driver profile to ensure secure and repeatable fastening. Is the cutting angle suitable for general turning tasks? The tool head presents a 90° cutting angle, offering a versatile geometry suitable for a wide range of turning and finishing applications. What are the key dimensional data for machine setup? Relevant setup values: 125 mm diameter and 63 mm overall length; use these figures to verify clearance and holder compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Milling Head For ANHX 1206 Indexable Inserts 90° Cutting Angle, 14 Cutting Edges, 63mm Overall Length - Teknik Makina
Take advantage of the combination of a 125 mm cutting diameter, a 90° cutting angle and compatibility with ANHX 1206 indexable inserts to achieve stable shoulder milling and consistent chip evacuation; procure the cutter head directly via Metav Werkzeuge or consult their specialists for supply and configuration advice. Corner milling head T646TM by Teknik Makina — 125 mm, for ANHX 1206 indexable inserts The Corner milling head T646TM is a 90° tool head engineered for secure shoulder and face milling operations using ANHX 1206 indexable inserts. 125 mm diameter for stable cutting Compatible with ANHX 1206 inserts 40 mm shank for secure clamping 14 cutting edges for high productivity High productivity through engineered geometry and robust stability The cutter delivers predictable cycle times thanks to its large 125 mm diameter and a true 90° cutting angle, which together produce consistent shoulder faces and minimise rework. The combination of multiple cutting edges translates into fewer tool changes: with 14 cutting edges, the machining rhythm is increased and downtime is reduced. This makes the tool particularly suited to batch production and components requiring repeatable right-angled faces, improving overall process efficiency. Fast setup and safe clamping for reliable machining Designed with a 40 mm shank, the head seats securely in standard toolholders, reducing axial play during heavy cuts. The clamping concept is supported by a Torx fixation system; the head uses an M3.5x8.5 Torx screw tightened with a T15 key, enabling quick and repeatable assembly. These details simplify changeover routines and provide a predictable torque interface, lowering the risk of assembly errors and improving shop-floor safety. Broad compatibility for flexible tooling strategies Acceptance of ANHX 1206 indexable inserts — compatible with manufacturers such as Palbit — gives the head access to a wide range of grades and chipbreakers. This flexibility allows process engineers to optimise inserts for steel, alloyed materials or finishing passes without changing the head geometry. By separating the cutting edge from the body, maintenance is concentrated on consumables rather than the holder, which supports lower lifecycle costs and streamlined inventory management. Practical benefits from purchase to production Sourcing the head through a trusted distributor enhances supply security and practical support. The component’s robust build and clear specification reduce inspection time at receipt and permit rapid integration into existing tool assemblies. Combined with Metav Werkzeuge’s emphasis on reliable supply from Emmerich and their broad product range, this head is a pragmatic choice for workshops seeking measurable improvements in throughput and consistency. For precise shoulder milling choose the Teknik Makina corner milling head T646TM via Metav Werkzeuge — contact the Metav specialists at info@metav-werkzeuge.com or on +49 2822 7131930 for tailored advice and reliable supply from Emmerich. Technical data Article number (SKU): T646TM Brand: Teknik Makina Designation: Corner milling head for ANHX 1206 indexable inserts Facts Diameter: 125 mm Cutting edges: 14 Overall length: 63 mm Shank diameter: 40 mm Weight: 3.091 kg Cutting angle: 90° Special features Compatible inserts: ANHX 1206 Suitable insert manufacturer: Palbit Torx screw: M3.5x8.5 Torx key size: T15 FAQ What inserts fit this milling head? The head accepts ANHX 1206 indexable inserts; compatible grades from manufacturers such as Palbit can be used depending on the material and finish requirement. What is the shank size and how does it affect clamping? The tool features a 40 mm shank diameter designed for standard toolholders, delivering secure clamping and reduced axial movement during heavy cuts. How many cutting edges does the head provide and what is the benefit? With 14 cutting edges, the head increases productive cutting length per assembly, reducing the frequency of changeovers and improving uptime. Which screw and key are required for insert replacement or maintenance? Insert and component fastening is effected with an M3.5x8.5 Torx screw using a T15 key for consistent torque and quick serviceability. Is this tool suitable for shoulder milling on high-volume parts? Yes; the combination of a 125 mm diameter and a 90° cutting angle makes the head well suited to repetitive shoulder milling where dimensional stability and surface consistency are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Milling Head for LNGX 1307 Indexable Inserts L63mm With Internal Coolant, 90° Cutting Angle - Teknik Makina
Robust 125 mm corner milling head with internal coolant and compatibility for LNGX 1307 indexable inserts ensures controlled chip evacuation and extended tool life. With eight cutting edges and a compact 63 mm overall length, the solution reduces tool changes and improves cycle consistency. Order the corner milling head directly via Metav Werkzeuge or ask the consultants for tailored specification support. Corner milling head for LNGX 1307 indexable inserts — 125 mm, internal coolant (Teknik Makina) A corner milling head engineered for stable face and corner machining in high-production CNC environments, compatible with LNGX 1307 indexable inserts and equipped with internal coolant. *125 mm diameter for stable cutting *Internal coolant for reliable chip control *LNGX 1307 compatible with Walter inserts *Eight cutting edges for efficient productivity Consistent performance through optimised coolant and geometry The compact tool head delivers repeatable results thanks to its internal coolant channel that directs cutting fluid precisely to the cutting zone. This targeted supply reduces heat build-up and improves surface quality on each pass, which translates into longer insert life and fewer interruptions on the shop floor. The design keeps vibration low and supports steady cutting forces, providing a measurable gain in machining stability for serial production runs. Reduced downtime with multiple effective cutting edges Equipped with 8 cutting edges, the head allows longer intervals between indexings compared with single-edge solutions, lowering changeover frequency and increasing spindle uptime. The 90° cutting angle yields predictable engagement and simple toolpath strategies for corner and face operations. This combination of geometry and edge count supports efficient material removal while maintaining dimensional control, especially when paired with standard LNGX 1307 inserts. Compact design and clear compatibility for seamless integration With a diameter of 125 mm and an overall length of 63 mm, the toolhead occupies minimal space in tool magazines while offering sufficient overhang for many fixture layouts. Compatibility with inserts from Walter and the LNGX 1307 series simplifies procurement and reduces the need for bespoke tooling. Fastener details such as T15 Torx drive and M4x11 screws ensure secure clamping and straightforward maintenance when replacing inserts or servicing the head. Contact Metav Werkzeuge for a machining consultation or to request detailed drawings and compatibility advice for the Teknik Makina corner milling head T495-1TM. Technical data SKU: T495-1TM Eclass: 21181015 Product type: Corner milling head Manufacturer: Teknik Makina Core dimensions Diameter: 125 mm Overall length: 63 mm Weight: 3.555 kg Number of cutting edges: 8 Cutting angle: 90° Features / Compatibility Internal coolant For LNGX 1307 indexable inserts Compatible with inserts by Walter Torx key: T15 Torx screw: M4x11 FAQ What materials is this head suitable for? The corner milling head is designed for general-purpose face and corner operations; compatibility with specific materials depends on the selected LNGX 1307 inserts and machining parameters, so matching insert grade to the workpiece is recommended. How does internal coolant improve machining with this head? Internal coolant in the T495-1TM directs fluid to the cutting edge, reducing temperature at the tool–workpiece interface and improving insert life and surface finish compared with external-only coolant. Which inserts fit this tool? This head accepts LNGX 1307 indexable inserts and is compatible with inserts supplied by Walter, providing a straightforward supply chain for replacement cutting edges. What fastening system is used for the inserts? Inserts are secured using M4x11 screws tightened with a T15 Torx driver, ensuring stable clamping under heavy cutting loads. Is the head suitable for automated tool magazines? The compact overall length (63 mm) and standard diameter make the head suitable for many automated toolchanger systems, provided the machine’s tool length and mass limits are observed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Milling Head for XEKT 1904 Indexable Inserts L63mm with Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of the robust 125 mm diameter, internal coolant and seven cutting edges for reliable shoulder turning and reduced cycle times; order the T370TM directly via Metav Werkzeuge or consult the technical team for application advice. Indexable Turning Head T370TM for XEKT 1904 – 125 mm, Internal Coolant (Teknik Makina) Indexable Turning Head T370TM designed for precise 90° shoulder turning with XEKT 1904 indexable inserts, suited to production lathe applications requiring stable, repeatable performance 125 mm diameter for stable cutting Internal coolant supply Seven cutting edges for extended tool life Compatible with Korloy XEKT 1904 inserts Stable cutting and consistent surface quality The large 125 mm tool body provides increased rigidity and reduced deflection during shoulder and face turning, resulting in improved dimensional stability and repeatability. The 90° cutting angle is optimised for clearances and efficient material removal while the compact L63 mm overall length keeps the cutting forces close to the spindle, which helps to reduce vibration and improves surface finish. These mechanical advantages translate into fewer reworks and a steadier production flow. Targeted cooling improves tool life and chip control Integrated internal coolant channels deliver cooling fluid directly to the cutting zone, which reduces thermal load and aids chip evacuation. For indexable insert systems such as XEKT 1904 by Korloy, this targeted coolant supply prolongs insert life and maintains edge integrity under continuous cuts. From a process standpoint, improved cooling means longer uninterrupted runs and lower tooling consumption per part. Quick, secure clamping for reduced setup time Tool change and clamping use the standard Torx T15 interface with an M4x8.5 Torx screw to ensure a secure, repeatable seat for the insert carrier. The mechanical fastenings are industry-standard, making maintenance straightforward and minimising downtime during insert changes. Simple, proven fixation also reduces the risk of seating errors and contributes to consistent cutting performance across shifts. Designed for the workshop and industrial workflows The compact but robust construction with a weight of 2.951 kg balances stiffness and handling for routine use in turning centres. The head is intended for use with indexable inserts, offering the modularity required in versatile production environments. For workshops seeking predictable supply and technical backing, the part number T370TM identifies the turning head unambiguously for procurement and inventory control. Contact Metav Werkzeuge today to discuss how Teknik Cutting Tools' turning head T370TM fits specific lathe setups and production targets — phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com for tailored advice and swift delivery from Emmerich. Technical data Article number: T370TM EClass: 21181015 Manufacturer: Teknik Makina Facts Diameter: 125 mm Overall length: 63 mm Weight: 2.951 kg Cutting edges: 7 Cutting angle: 90° Torx key: T15 Torx screw: M4x8.5 Special features Internal coolant: yes Compatible with XEKT 1904 indexable inserts Inserts manufacturer compatibility: Korloy Product type: Indexable turning head FAQ What inserts fit this turning head? The turning head accepts XEKT 1904 indexable inserts; the design is matched to the insert geometry for reliable seating and chip formation. Does the tool provide coolant directly to the cutting edge? Yes, the head features internal coolant channels that deliver fluid to the cutting zone to extend insert life and improve chip evacuation. What fastener is used for the insert seat? The insert seat is secured with a Torx T15 screw, specified as M4x8.5, ensuring repeatable clamping torque and secure seating. How does the 125 mm diameter benefit machining? A 125 mm body increases stiffness and reduces deflection, which improves dimensional accuracy and surface finish during shoulder turning. Is the T370TM suitable for production turning centres? The T370TM is built for production use, offering modular indexing, robust construction and coolant support for longer running times and predictable process behaviour. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Corner Tool Head for WNMU 0806 Indexable Inserts L63mm, 90° Cutting Angle - Teknik Makina
Take advantage of a robust combination of 125 mm diameter stability and compatibility with WNMU 0806 indexable inserts for reliable turning operations; the compact 63 mm overall length and clear fastening standard make integration into existing setups straightforward. Order the tool head directly via Metav Werkzeuge or contact the consultants for tailored advice. Indexable corner tool head T547TM — 125 mm diameter, for WNMU 0806 indexable inserts (Teknik Makina) The Indexable corner tool head T547TM is a compact turning solution designed for heavy-duty stability and fast insert changes in industrial turning applications 125 mm diameter for robust stability Compatible with WNMU 0806 inserts (Kyocera) Overall length 63 mm for compact mounting Ten cutting edges for longer productivity Consistent stability that reduces vibration and scrap A larger head diameter provides a solid platform: the 125 mm body helps to dampen chatter and maintain a constant tool position during interrupted cuts, which directly improves surface finish and extends insert life. The substantial mass and engineered geometry support repeatable turning results, so the machining process becomes more predictable and cycle times more consistent. This advantage is particularly relevant in production environments where component tolerances and batch consistency are decisive. Fast insert interchange and proven compatibility for uptime Designed around the WNMU 0806 insert format, the tool head accepts standard indexable inserts from Kyocera, enabling immediate use of widely available cutting grades. Quick access to the insert pocket reduces tool change time and simplifies stocking of spare inserts. The standardised mounting and insert interface make tool setup straightforward on mixed-production lines, allowing a clear material-cost-to-productivity balance to be achieved without bespoke adapters. Straightforward fastening and maintenance to minimise downtime Service and routine maintenance are simplified by using a common T20 Torx key and M5x12 fixing screws for secure retention. The standardised fasteners provide reliable clamp force while being easy to access, helping to shorten maintenance intervals. With a defined 90° cutting angle and a configuration offering ten cutting edges, the head is optimised for repeatable shoulder turning and finishing passes, cutting the need for frequent adjustments and supporting continuous operation. Compact design for versatile installation in diverse setups With an overall length of 63 mm and balanced mass (2.945 kg), this tool head is suitable where space is limited yet rigidity cannot be compromised. Its dimensions allow mounting in confined tool turrets or holders without sacrificing the contact stability that larger assemblies provide. The compact envelope supports efficient spindle handling and helps integrate the head into automated change systems or manual setups while maintaining the process reliability expected in industrial turning. Contact Metav Werkzeuge for precise ordering and delivery options from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the T547TM indexable corner tool head and its fit for specific turning tasks Technical data Article number: T547TM Label: 125 mm corner tool head WNMU 0806 L63 mm Product: Corner tool head Facts Diameter: 125 mm Mounting diameter: 40 mm Overall length: 63 mm Weight: 2.945 kg Cutting edges: 10 Cutting angle: 90° Torx screw: M5x12 Torx key: T20 eClass: 21181015 Special features Compatible with WNMU 0806 indexable inserts Compatible insert manufacturer: Kyocera Brand: Teknik Makina SKU: T547TM FAQ What inserts fit this tool head? The tool head accepts WNMU 0806 indexable inserts, compatible with standard Kyocera grades for turning and finishing. How is the insert secured and which tools are needed? Inserts are secured with M5x12 Torx screws tightened with a T20 key, providing reliable clamping and easy service. Is the head suitable for tight mounting spaces? Yes; the compact 63 mm overall length and standard mounting diameter make the head suitable for restricted turret or holder envelopes. Which cutting angle does the head provide for shoulder operations? The head is configured with a 90° cutting angle, optimised for square shoulder turning and consistent finishes. Can the head be used with Kyocera inserts from existing stocks? Compatibility with Kyocera WNMU 0806 inserts allows direct use of existing insert stocks without additional adapters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Corner Tool Head for XNEX 0806 Indexable Inserts L60mm With Internal Cooling, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of high rigidity, precise 90° cutting geometry and built-in coolant for consistent cycle times and reliable surface finish; order the tool head directly via Metav Werkzeuge or contact our consultants for application support. Eckmesserkopf – 125 mm angled tool head with internal coolant for XNEX 0806 Indexable Inserts by Teknik Makina Eckmesserkopf is a 90° corner turning head designed for secure, coolant-fed machining with XNEX 0806 indexable inserts in demanding production environments. 125 mm diameter for stable machining Internal coolant for improved chip control Compatible with XNEX 0806 inserts (SECO) Robust M4x12.5 fastening with T15 drive Consistent rigidity and repeatable geometry for stable turning The holder body offers a substantial 125 mm diameter, which increases mass at the cutting zone and reduces vibration during interrupted cuts. This enhanced stability leads to more consistent surface finish and extended insert life compared with smaller-diameter alternatives. The unit’s overall length of 60 mm keeps overhang to a minimum, improving stiffness while retaining accessibility for many turning operations. With a nominal mass of 3.155 kg, the construction balances inertial damping and tool change practicality, supporting repeatable results across batches. Built-in coolant for improved process reliability Equipped with internal coolant, the head delivers cutting fluid directly to the insert pocket to improve chip evacuation and thermal control. Direct coolant at the cutting edge reduces built-up edge formation and helps maintain tool life under continuous operation. For shops where coolant-fed machining is standard practice, this feature translates into fewer unscheduled interruptions and steadier cycle times. The design is simple to integrate into existing coolant supply circuits and supports common machining strategies without additional fixtures. Designed for secure clamping and straightforward maintenance The cutting inserts mount in a configuration suited to XNEX 0806 indexable inserts and accept SECO-compatible geometries, ensuring access to a wide range of grades and chipformers. The clamping uses M4x12.5 Torx screws driven with a T15 tool, allowing fast and reliable insert changes while maintaining correct seating force. Ten insert positions are provided to maximise productivity per tool body before a full service cycle is required. Clear mechanical fastening and standardised spares mean downtimes are minimised and maintenance remains predictable. Application fit and practical advantages in production With a defined 90° cutting angle, the head is optimised for corner and face-turning tasks that require square shoulders or precise step features. The geometry simplifies programming and reduces the number of tool setups required for multi-diameter parts. Compatibility with established indexable inserts gives flexibility when selecting grades for different materials or cutting conditions, allowing shops to balance cost per edge with required component tolerances. The compact length also helps where turret or gang-tool space is limited. Contact Metav Werkzeuge for tailored application advice and reliable supply of Teknik Cutting Tools tool heads such as the T848-1TM via Metav Werkzeuge’s technical sales team in Emmerich. Technical data Article number: T848-1TM ECLASS: 21181015 Product type: Eckmesserkopf Manufacturer: Teknik Makina Facts Diameter: 125 mm Overall length: 60 mm Weight: 3.155 kg Cutting angle: 90° Special features Internal coolant For XNEX 0806 indexable inserts Compatible with SECO inserts Number of cutting positions: 10 Fastening screw: M4x12.5 Torx key: T15 FAQ What inserts are compatible with this tool head? The tool head accepts XNEX 0806 indexable inserts and is specified to be compatible with SECO-manufactured insert designs for broad grade selection. Does the head provide coolant to the cutting edge? Yes, the unit features internal coolant that supplies fluid directly to the insert pocket for improved chip evacuation and thermal control. How is the insert secured and what drive is required? Inserts are secured with M4x12.5 Torx screws; a T15 Torx key is used for insertion and removal to ensure correct clamp torque and quick servicing. Is the head suitable for operations requiring a square shoulder? The 90° cutting geometry is specifically suited to square-shoulder and corner turning applications where precise shoulder definition is required. What is the article number for ordering or identification? The article number (SKU) is T848-1TM, which should be quoted for orders and technical enquiries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Tool Head LNMX 1510 L63mm With Internal Coolant, 90° Cutting Angle - Teknik Makina
Benefit from the combination of a 125 mm diameter, internal coolant and LNMX 1510 compatibility for precise, reliable turning — order directly from Metav Werkzeuge or contact our consultants for application advice. Square-head tool holder T380-1TM — 125 mm diameter with internal coolant, for LNMX 1510 Indexable Inserts (Teknik Makina) A square-head tool holder engineered for industrial turning and facing operations using LNMX 1510 indexable inserts, designed to deliver stable performance in confined setups. 125 mm cutting diameter Internal coolant supply Fits LNMX 1510 indexable inserts Robust 63 mm overall length Greater rigidity for improved surface finish and repeatability The larger 125 mm diameter and a mass of 3.65 kg provide enhanced structural stability, reducing chatter during heavy cuts. This increased rigidity translates into a more consistent surface finish and tighter tolerances on turned components, which is especially beneficial in batch production or when machining difficult geometries. The robust construction supports sustained high-performance milling and turning cycles without compromising accuracy. Integrated cooling that extends insert life and control The tool head’s internal coolant delivery directs fluid precisely to the cutting zone, reducing thermal load and improving lubrication at the point of contact. This targeted cooling improves chip control and slows thermal wear, which can extend the service life of indexable inserts, reduce unplanned downtime and lower tool consumption over long production runs. For machining operations where temperature control is critical, this feature brings measurable process stability. Broad insert compatibility for streamlined sourcing Designed for LNMX 1510 indexable inserts and compatible with inserts from Korloy, the holder ensures easy procurement and predictable performance across many industrial workflows. Using standardised insert types simplifies inventory management and makes it straightforward to replace cutting edges without altering clamping geometry. The result is less machine idle time and a smoother supply chain for consumables in the workshop. Compact design ideal for tight setups and multiposition turrets With an overall length of 63 mm, the head keeps overhang to a minimum while still delivering the access needed for facing and profiling close to fixtures. The compact footprint makes it suitable for multi-station turrets and compact lathes where space is limited, helping to maintain stiffness and reduce leverage that can otherwise degrade accuracy in constrained setups. Secure clamping and straightforward maintenance Clamping is executed with a Torx T15 key and a M4x12.5 screw, offering reliable, repeatable fastening and simple service procedures. The standardised fastener format allows quick insert changes and predictable torque application, cutting maintenance time and simplifying operator training. This pragmatic approach supports high uptime in production environments where speed and safety are priorities. Designed for consistent industrial performance A 90° cutting angle supports true right-angle turning tasks and straightforward programming in CNC cycles, while the overall build is aimed at continuous industrial use. The combination of dimensional stability, direct coolant feed and compatibility with widely available inserts makes this head a dependable choice for workshops seeking process predictability and efficient tool change routines. For tailored application advice on Teknik Cutting Tools' square-head tool holder T380-1TM and reliable supply from Emmerich, contact Metav Werkzeuge for technical guidance and fast dispatch. Technical Data Article number: T380-1TM Label: 125mm Eckmesserkopf LNMX 1510 L63mm mit Innenkühlung Product type: Square-head tool holder Eclass: 21181015 Facts Diameter: 125 mm Overall length: 63 mm Weight: 3.65 kg Cutting angle: 90° Special features Internal coolant Compatible with LNMX 1510 indexable inserts Suitable for Korloy inserts Torx key size T15 Screw M4x12.5 FAQ What insert type does this holder accept? The holder is specified for LNMX 1510 indexable inserts and is compatible with inserts from Korloy, ensuring ready availability of replacement cutting edges. Is the coolant supplied internally or externally? This square-head tool holder features internal coolant delivery, directing fluid to the cutting zone to improve cooling and chip evacuation. What are the key dimensions for tool setup? Key setup dimensions include a 125 mm diameter and an overall length of 63 mm, which help balance reach and rigidity in constrained turret positions. Which fastener is used for clamping the insert? Insert clamping is secured with a Torx T15 key and an M4x12.5 screw to provide repeatable, secure fastening during production. Is this head suitable for high-volume industrial turning? Yes. The combination of structural mass, internal coolant and compatibility with standard LNMX 1510 inserts makes the tool head suitable for continuous industrial turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Tool Holder For LNMT 1306 Indexable Inserts 90° Cutting Angle, M4x10 Torx Screw - Teknik Makina
Take advantage of a compact tooling solution that combines repeatable shoulder accuracy with straightforward mounting: the head’s 90° cutting angle and compatibility with LNMT 1306 indexable inserts ensure consistent square cuts, while the robust 40 mm shank and secure M4x10 Torx screw (T15) reduce setup time and vibration. Order or request advice via Metav Werkzeuge for seamless integration. Corner Tool Head (Eckmesserkopf) by Teknik Makina — 90° indexable insert holder The Corner Tool Head (Eckmesserkopf) is a 90° indexable tool head designed for heavy‑duty shoulder and face turning operations using LNMT 1306 inserts. 90° cutting angle for square shoulders Accepts LNMT 1306 indexable inserts 40 mm shank for rigid clamping Consistent square machining with minimal rework The right‑angle geometry delivers a 90° cutting angle that is engineered to produce repeatable square shoulders and accurate face cuts. Using the matching LNMT 1306 indexable inserts, the holder enables predictable chip formation and consistent tool engagement, which reduces the need for rework and polishing passes. For operations where cycle time and first‑pass quality matter, this indexable solution converts insert changes into quick maintenance steps rather than long downtimes. Stable mounting and service‑friendly fastening for reliable production A 40 mm shank diameter offers a sturdy interface with standard toolholders, improving stiffness and reducing deflection under load. The clamping system is secured with a M4x10 Torx screw (T15) for fast, repeatable attachment and straightforward maintenance. Combined with a 125 mm diameter head and a balanced mass of 3.325 kg, the assembly is built to withstand machining forces while maintaining alignment—benefits that translate directly into fewer rejects and longer tool life. Compact form for easy integration and predictable toolpaths With an overall length of 63 mm and a cutting configuration featuring 12 cutting points, the head integrates cleanly into existing turret or toolpost setups without requiring extensive reprogramming. The relatively short overhang and compact geometry reduce vibration and improve surface finish when used for external facing or shoulder cuts. Specifying this holder in production planning supports stable toolpaths and simplifies spare‑parts logistics through standardised insert compatibility. Contact Metav Werkzeuge for a compatibility check and procurement advice on the Teknik Makina Corner Tool Head T232TM; our team in Emmerich will advise on mounting options and delivery times Technical data Article number: T232TM Brand: Teknik Makina For inserts: LNMT 1306 Compatible with inserts manufacturer: ISCAR Core data Diameter: 125 mm Shank diameter: 40 mm Weight: 3.325 kg Cutting angle: 90° Overall length: 63 mm Cutting edges: 12 Special features Indexable corner tool head design Torx screw M4x10, Torx key T15 Suitable for shoulder and face turning SKU T232TM FAQ What inserts fit this tool head? The Corner Tool Head accepts LNMT 1306 indexable inserts; compatibility with ISCAR‑made LNMT 1306 inserts is indicated for straightforward procurement and replacement. Is the holder suitable for heavy‑duty shoulder machining? Yes. The holder’s 90° cutting angle, 40 mm shank and 3.325 kg mass provide the rigidity necessary for heavy‑duty shoulder and face turning operations. Which fastening hardware is required for maintenance? Maintenance and insert changes are performed with the M4x10 Torx screw (T15) specified for the tool head; a T15 Torx key is recommended for secure and repeatable clamping. How does the compact length affect machining stability? The 63 mm overall length reduces overhang and helps control deflection, resulting in improved surface finish and longer tool life when the holder is mounted correctly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Turning Head ADKT 1505 For Indexable Inserts L62mm Internal Coolant - Teknik Makina
Benefit from precise 90° cutting performance combined with an integrated coolant supply and a compact 125 mm diameter design for consistent production output. Order the T208-1TM via Metav Werkzeuge or consult the technical team for application-specific guidance. Eckmesserkopf T208-1TM — indexable corner tool head, 125 mm diameter (Teknik Makina) The Eckmesserkopf T208-1TM is a purpose-built indexable corner tool head for ADKT 1505 indexable inserts, engineered for stable turning operations and improved tool life through internal coolant. 125 mm diameter turning head For ADKT 1505 indexable inserts Integrated internal coolant supply 90° cutting angle for precise corner cuts Reliable chip evacuation and consistent cutting quality The head’s internal coolant delivers coolant directly to the cutting zone, reducing temperatures and improving flank wear characteristics. With a 125 mm diameter and a compact 62 mm overall length, the assembly provides a stiff, vibration-resistant solution that supports reproducible surface finishes and extended insert life. This configuration translates into fewer interruptions for insert changes and more predictable cycle times on production lathes. Fast insert changes and secure clamping for reduced setup time Designed for straightforward maintenance, the tool head uses T15 Torx drive and M4x10 screws to secure inserts, enabling rapid, repeatable seating and torque control. The combination of robust screw fixation and a defined 90° cutting angle ensures stable engagement during face and corner-turning tasks. Operators benefit from reduced setup complexity and shorter machine downtime when service or insert rotation is required. Broad compatibility for workshop standardisation and process planning Compatible with ADKT 1505 indexable inserts and matched to ISCAR insert geometries, the unit helps standardise tooling across mixed-machine environments. At a weight of 0.272 kg, the head minimises added toolholder inertia while remaining rugged enough for industrial turning. Use in series production or small-batch manufacturing supports consistent process parameters and easier tool inventory management. For further technical specifications or to verify fitment in a specific holder, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Contact Metav Werkzeuge today to discuss application suitability for the Teknik Makina T208-1TM and arrange procurement or technical consultation. Technical data SKU: T208-1TM Product type: Eckmesserkopf Manufacturer: Teknik Makina Label: 125mm Eckmesserkopf ADKT 1505 L62mm mit Innenkühlung eClass: 21181015 Facts Diameter: 125 mm Overall length: 62 mm Toolholder bore (aufnahme): 40 mm Weight: 0.272 kg Cutting edges: 9 Cutting angle: 90° Torx key: T15 Torx screw: M4x10 Special features Internal coolant supply For ADKT 1505 indexable inserts Compatible with ISCAR inserts Compact, vibration-resistant design FAQ What insert type does the T208-1TM accept? The T208-1TM is specified for ADKT 1505 indexable inserts and is compatible with ISCAR geometries, enabling direct use of standard ADKT 1505 inserts. Is the tool head supplied with internal coolant capability? Yes, the TekÂnik Makina T208-1TM features internal coolant to direct coolant to the cutting zone and support thermal stability. Which fasteners are required for insert clamping? The head uses a T15 Torx drive with M4x10 screws for secure and repeatable insert clamping on the T208-1TM. What are the main dimensional data for planning tool assembly? Key dimensions for the T208-1TM include a 125 mm diameter, 62 mm overall length and a 40 mm toolholder bore. For which applications is this corner tool head intended? The Eckmesserkopf T208-1TM is intended for precision corner and face-turning operations where a 90° cutting angle and coolant-fed cutting improve surface finish and tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930
125mm Corner Turning Head For ADKT 1505 Indexable Inserts, 90° Cutting Angle, M4x10 Torx – Teknik Makina
Take advantage of the combination of precision compatibility and easy maintenance to keep turning processes efficient and predictable; order the toolhead directly via Metav Werkzeuge or consult their technical team for application-specific advice. Eckmesserkopf T208TM — 90° turning head for ADKT 1505 indexable inserts by Teknik Makina Eckmesserkopf T208TM is a compact 90° turning head designed for heavy-duty edge engagement and reliable clamping in short-overhang turning applications 90° cutting angle for square turning Compatible with ADKT 1505 inserts 40 mm shank for stable clamping Torx screw M4x10, Torx key T15 included Precision and stability for consistent turning results The corner cutting head delivers repeatable geometry thanks to its 90° cutting angle and a sturdy 40 mm shank, which together reduce vibration during engagement and support accurate chip formation. Designed for ADKT 1505 indexable inserts, the toolhead ensures consistent cutting edges and predictable tool life when paired with suitable inserts from ISCAR. The combination of robust shank diameter and compact overall length provides a stable interface with the toolpost, helping to maintain finish quality and dimensional control across production runs. Faster tool change and lower setup complexity Quick and reliable insert clamping is achieved with the supplied M4x10 Torx screw and the matching T15 key interface, allowing rapid insert replacement and minimising machine downtime. The head accepts ADKT 1505 indexable inserts, so spare parts and replacements are standardised for efficient inventory management. Reduced setup time translates into better machine utilisation and a faster return on operational resources, making the head suitable for both small-batch workshops and larger production lines where changeover speed matters. Designed for workshop durability and compact integration With a nominal diameter of 125 mm, an overall length of 62 mm and a weight of 0.272 kg, the component combines compact form with practical handling characteristics. The head features nine defined cutting edges, arranged to support the intended cutting geometry and to balance load distribution across the insert. Constructed for integration into conventional toolholders with a 40 mm mounting interface, the unit fits existing setups with minimal adaptation, delivering a straightforward upgrade path for machining centres and lathes requiring square turning capability. Contact Metav Werkzeuge for application advice or to source this Teknik Makina turning head; Metav’s specialists in Emmerich are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: T208TM Manufacturer: Teknik Makina Data Diameter: 125 mm Shank diameter (d): 40 mm Overall length: 62 mm Weight: 0.272 kg Cutting angle: 90° Number of cutting edges: 9 Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key T15 FAQ What insert type does this turning head accept? The turning head accepts ADKT 1505 indexable inserts; it is supplied to work with standard ADKT 1505 geometries. Is the head compatible with ISCAR inserts? Yes, the design is compatible with inserts from ISCAR and other manufacturers that follow the ADKT 1505 specification. What is the shank diameter and why does it matter? The shank diameter is 40 mm; a larger shank improves clamping rigidity, which in turn reduces vibration and improves surface finish consistency. Which Torx screw and key are required for insert fastening? Insert fastening uses an M4x10 Torx screw and a T15 Torx key, both referenced in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Turning Head for ANKX 0706 Indexable Inserts, 90° Cutting Angle, 8 Cutting Edges - Teknik Makina
Benefit from a robust combination of a Ø125 mm tool head, a 90° cutting angle and 8 cutting edges for stable, repeatable turning operations; procure the T450TM via Metav Werkzeuge or consult our specialists for application support. Eckmesserkopf T450TM – Corner tool head Ø125 mm, 90° for ANKX 0706 (Teknik Makina) An Eckmesserkopf T450TM engineered as a corner turning head for external machining, optimised for ANKX 0706 indexable inserts and general turning tasks in production environments Robust corner tool head Ø125 mm 90° cutting angle for precise profiling 8 cutting edges for extended tool life Compatible with ISCAR ANKX insert series Predictable cycle times through geometric stability The head delivers measurable benefits in cycle consistency thanks to its Ø125 mm head diameter and a compact overall length of 63 mm, which together reduce vibration and deflection during turning. The 40 mm shank provides a secure clamping interface, ensuring the clamped assembly remains rigid under cutting forces; this geometric stability translates directly into improved dimensional repeatability and reduced scrap rates for series production. The documented mass of 3.59 kg contributes to damping, enhancing surface finish without complex machine adjustments. Lower tooling cost per part via multiple cutting edges Equipped with 8 cutting edges, the tool head reduces downtime associated with index changes and tool changes, improving productivity and cost-efficiency. The design accepts ANKX 0706 indexable inserts (ISCAR-compatible), enabling economical insert indexing and simplified inventory management. Fast replacement is achieved with the M5x12 Torx screws and a T20 driver, limiting maintenance time and keeping the machine spindle producing rather than waiting for tooling intervention. Clear compatibility and easy integration into tool setups The holder is prepared for ISCAR-style inserts from the ANKX family and is intended for systems that require a 90° approach angle for profiling and shoulder turning. The T450TM suits workshops standardising on indexable turning systems and integrates with existing turret pockets that accept a 40 mm holder seat. This compatibility removes guesswork during procurement and supports process standardisation, allowing purchasing to consolidate supplier lists without sacrificing flexibility on the shop floor. Practical handling, inspection and workshop benefits Maintenance routines are straightforward: insert changes and clamping checks use common workshop tools (Torx T20) and standard screw size (M5x12), so technicians can perform service quickly and with minimal special tooling. The compact overall length of 63 mm reduces interference in multi-tool turret arrangements, and the robust construction supports reliable performance in medium-duty turning operations. These practical aspects reduce machine downtime and simplify spare parts stocking. Rely on Teknik Makina's T450TM corner tool head for stable turning; order through Metav Werkzeuge for secure supply and professional advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T450TM Manufacturer: Teknik Makina Product name: Eckmesserkopf Designation: for ANKX 0706 Indexable Inserts eClass: 21181015 Facts Diameter: 125 mm Cutting angle: 90° Shank / holder diameter: 40 mm Overall length: 63 mm Weight: 3.59 kg Cutting edges: 8 Torx screw: M5x12 Torx key size: T20 Special features Compatible insert system: ISCAR ANKX family Suited for external turning and profiling Compact length for crowded turret setups FAQ Which insert size is the head designed for? The Eckmesserkopf T450TM is specified for ANKX 0706 indexable inserts and is compatible with ISCAR ANKX-style insert geometries as noted for the T450TM holder. What fastening and service parts are required for insert changes? Insert clamping on this corner tool head uses M5x12 Torx screws and a T20 driver; these parts are listed for Teknik Makina T450TM service procedures. What are the main dimensions that affect turret integration? Key dimensions for integration are a 40 mm shank diameter, Ø125 mm head diameter and an overall length of 63 mm; these determine fitment and clearance in turret pockets for the T450TM corner tool head. Is the holder suitable for precision turning and stable finishing? Yes, the 90° cutting angle, robust mass (3.59 kg) and 8 cutting edges make this holder suitable for stable finishing and repeatable turning operations when equipped with appropriate ANKX inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Corner Turning Head for APKT 1604 Indexable Inserts 90° Cutting Angle, M4x10 Torx T15 - Teknik Makina
Take advantage of a robust combination of secure toolholding and insert compatibility for precise, repeatable profiling — the compact design and 40 mm shank ensure stable machining and quick insert changes. Order the corner cutting head directly via Metav Werkzeuge or ask our consultants if needed. Corner cutting head for APKT 1604 indexable inserts (T190TM) — 125 mm diameter, 90° cutting angle Corner cutting head (T190TM) designed for medium‑duty indexable insert operations; suitable for milling tasks that require a stable tool body and fast insert replacement Compatible with APKT 1604 indexable inserts 125 mm cutter diameter for stable machining 40 mm shank diameter for secure toolholding Torx M4x10 fastening; T15 Torx key required Stable cutter geometry for consistent surface quality The robust body and the 125 mm diameter deliver stiffness that reduces chatter and improves surface finish during interrupted or continuous cuts. With a defined 90° cutting angle and 9 cutting edges, the head maintains a predictable cutting behaviour across multiple passes, which supports process reliability and reduces rework. The construction is intended to provide a consistent engagement with the workpiece, translating into measurable time savings on serial production and a reduced scrap rate. Fast insert clamping and straightforward maintenance Designed around the industry standard APKT 1604 format, the head accepts inserts from recognised suppliers such as Korloy, allowing flexible stocking and fast changeover. The inserts are secured by an M4x10 Torx screw and require a T15 key for replacement, enabling rapid, repeatable clamping without special tools. A 40 mm shank diameter ensures firm seating in standard toolholders, contributing to minimal runout and reliable reproducibility for batch work. Compact length for versatile set‑ups and reliable handling With an overall length of 62 mm and a weight of 3.642 kg, the tool head balances compact installation with the mass necessary to dampen vibration in many machining conditions. The combination of a shorter overhang and sturdy shank improves accessibility in confined setups while maintaining cutting stability. This makes the tool head suitable for workshops looking to streamline tool inventories while keeping flexibility for various milling operations. Application advantage: predictable results and efficient workflows Integrating this indexable head into a production line contributes to predictable cycle times: stable geometry and standardised insert interfaces simplify process planning and tool management. The ability to use widely available APKT 1604 inserts reduces procurement complexity and supports quick recovery from tool wear events. For machining centres requiring dependable repeatability, the head provides a practical balance between performance and operational simplicity. Contact Metav Werkzeuge in Emmerich for tailored application advice and supply of Teknik Cutting Tools components — technical consultation available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T190TM Manufacturer: Teknik Makina Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Cutter diameter (mm): 125 Shank diameter (mm): 40 Overall length (mm): 62 Number of cutting edges: 9 Cutting angle: 90° Fastening screw: M4x10 Required Torx key: T15 Weight (kg): 3.642 Core specifications eClass: 21181015 SKU: T190TM Story trigger: eckmesserkopf Materials & features Indexable insert system: APKT 1604 Designed for standard toolholders with 40 mm shank Torx screw fixation for repeatable clamping Compact overall length for close‑quarter machining FAQ What inserts fit this cutting head? The head is made for APKT 1604 indexable inserts; Korloy inserts in that format are a listed compatible option for this tool. Which toolholder dimension is required for mounting? A toolholder that accepts a 40 mm shank is required to mount this corner cutting head (SKU T190TM) securely. How are the inserts fixed in place? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is used for tightening and removal to ensure consistent clamping torque. Is this tool head suitable for heavy interrupted cuts? The 125 mm diameter and compact design provide stiffness that helps manage interrupted cuts, offering improved stability and repeatability for many medium‑duty applications. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Turning Head for BOMT 1304 Indexable Inserts with Internal Coolant, 90° - Teknik Makina
Take advantage of a robust 125 mm corner turning head that combines compatibility with BOMT 1304 indexable inserts and integrated internal coolant for improved chip control and longer tool life. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Corner turning head for BOMT 1304 indexable inserts — 125 mm, internal coolant (Teknik Makina) Corner turning head for BOMT 1304 indexable inserts designed for square/shoulder turning operations with built-in coolant supply and a compact 63 mm overall length. 125 mm diameter cutting head Compatible with BOMT 1304 indexable inserts Integrated internal coolant for chip control 90° cutting angle for square shoulder turning Improve machining stability with internal coolant and precise chip control The built-in internal coolant channel ensures directed coolant flow to the cutting edge, supporting consistent chip evacuation and reducing thermal load at the cutting zone. Directed coolant reduces heat-related wear and helps maintain dimensional stability across longer runs, which translates to fewer changeovers and improved process reliability. For jobs requiring repeatable shoulder faces, the combination of coolant feed and rigid geometry supports stable cutting conditions and predictable results. Reliable compatibility for quick tool set-up and consistent results Designed to accept BOMT 1304 indexable inserts (suitable with Ingersoll inserts), the head simplifies insert selection and replacement while maintaining the correct 90° cutting angle for shoulder operations. The compatibility with a common insert family reduces setup complexity and inventory variety, enabling faster changeovers and consistent surface finishes. The Corner turning head retains accurate insert positioning to keep repeatability high, which benefits batch production and fine-tolerance turning tasks. Solid design that supports industrial workloads With a 125 mm diameter and a compact 63 mm overall length, the component offers a balance of rigidity and accessibility for shoulder turning in confined setups. The mass and construction support vibration damping and cutting stability, which helps preserve insert life and reduce unwanted surface irregularities. The result is a robust turning solution suited to demanding shop-floor environments where steady performance and minimal rework are priorities. Practical fastening and maintenance details for reliable operation Fastening uses an M3.5×8.5 torx screw requiring a T10 Torx key, ensuring secure clamping of the insert seat and minimal play during cutting. Clear specification of fastener type simplifies procurement of service tools and replacement parts, while the head’s straightforward design keeps routine inspection and maintenance efficient. Documentation of these details supports predictable downtime planning and reduces the risk of assembly errors during insert changes. Contact Metav Werkzeuge for application guidance or to arrange a technical assessment of the Teknik Makina corner turning head (SKU T972TM) to ensure optimal integration into existing tool cycles Technical data SKU: T972TM ECLASS: 21181015 Manufacturer: Teknik Makina Product type: Corner turning head Label: 125mm Corner turning head BOMT 1304 L63mm with internal coolant Key figures Diameter: 125 mm Overall length: 63 mm Weight: 3.314 kg Cutting angle: 90° Number of cutting edges: 11 Special features Internal coolant: Yes Compatible inserts: BOMT 1304 Compatible insert manufacturer: Ingersoll Torx screw: M3.5×8.5 Torx key: T10 FAQ What inserts fit this turning head? This turning head accepts BOMT 1304 indexable inserts; compatibility is indicated for Ingersoll-made inserts and the head is designed for correct seating of this insert family. Does the head supply coolant to the insert tip? Yes, the head features internal coolant to deliver coolant directly toward the cutting edge, aiding chip control and thermal management during cutting. What is the cutting geometry of the head? The head provides a 90° cutting angle, making it suitable for square shoulder and face-turning operations where a right-angle approach is required. Which fastening hardware is specified for insert clamping? Insert clamping uses an M3.5×8.5 Torx screw, compatible with a T10 Torx key as specified in the technical data. Is the product suitable for heavy-duty industrial use? The head’s 125 mm diameter, compact 63 mm overall length and solid construction are intended for stability in production environments, supporting durable performance under continuous operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Turning Head for R390-1704 Indexable Inserts 90° Cutting Angle, M3.5x8.5 Torx T15 - Teknik Makina
Take advantage of a rigid 40 mm shank and a 90° cutting angle for stable, repeatable machining with Sandvik R390-1704 inserts; order directly via Metav Werkzeuge or consult our specialists for application support. 90° Indexable Insert Head (Eckmesserkopf) — for R390-1704, 40 mm Shank — Teknik Makina The 90° indexable insert head is a compact turning tool holder engineered for precise shoulder and profiling operations using R390-1704 indexable inserts, suited to CNC lathes and turret tool posts. 90° cutting angle for precise shoulder work Compatible with R390-1704 indexable inserts 40 mm shank for high rigidity and stability Torx M3.5x8.5 screw with T15 key for secure clamping Increased stability for consistent surface quality A robust 40 mm shank and a substantial head diameter of 125 mm deliver the rigidity necessary to reduce tool vibration and chatter. The resulting improvement in surface finish and dimensional stability comes from the fixed 90° cutting angle, which concentrates cutting forces and allows predictable chip formation. For production environments that demand repeatability, the construction minimises deflection and extends insert life, lowering overall tooling costs. Faster insert changes and reliable clamping reduce downtime Quick and secure insert replacement is enabled by the Torx M3.5x8.5 fastening combined with a T15 key, which simplifies tool change routines and limits over-tightening. Compatibility with R390-1704 inserts (Sandvik) means commonly stocked inserts can be used immediately, shortening setup time. The straightforward clamping design supports efficient workshop workflows and reduces non-productive time during batch changeovers. Integration with existing turning systems and versatile application Designed to fit tool posts with a 40 mm holder interface, this head integrates easily into established toolsets and supports a range of external turning and profiling tasks. The head’s overall length of 62 mm and a compact footprint help when multiple tools are mounted in close proximity. Weighing 3.68 kg, the assembly offers a balance between mass for dampening and a size that keeps turret loads manageable, making it suitable for both heavy cuts and precise finishing operations. For technical advice or to source the Teknik Cutting Tools 90° indexable insert head (SKU T414TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing tooling systems Technical data Article number: T414TM Manufacturer: Teknik Makina Compatible inserts: R390-1704 (Sandvik) Shank diameter: 40 mm Head diameter: 125 mm Overall length: 62 mm Cutting angle: 90° Weight: 3.68 kg Torx screw: M3.5x8.5 Torx key size: T15 Core data Shank diameter: 40 mm Head diameter: 125 mm Overall length: 62 mm Weight: 3.68 kg Cutting angle: 90° Cutting edges: 9 Special features Compatible with R390-1704 indexable inserts (Sandvik) Torx M3.5x8.5 fastening T15 key for clamping SKU T414TM Brand: Teknik Makina FAQ Which inserts fit this head? The head accepts R390-1704 indexable inserts; compatible inserts from Sandvik can be fitted without modification. What is the shank interface size? The tool head uses a 40 mm shank interface suitable for standard 40 mm holder mounts. How is the insert secured? Inserts are clamped with a Torx M3.5x8.5 screw tightened using a T15 key for secure, repeatable clamping. Is the head suitable for heavy roughing cuts? With a 40 mm shank and a solid build, the head provides the rigidity needed for demanding turning operations, improving stability under load. What is the SKU for ordering or referencing? Order or reference SKU T414TM when enquiring about the Teknik Cutting Tools 90° indexable insert head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Turning Head for SNHU 1206 Indexable Inserts, 10 Cutting Edges, 63mm Overall Length, M4x10 Fastener - Teknik Makina
Benefit from a compact design that combines a 125 mm diameter for stable cutting with a 40 mm bore for straightforward mounting; secure clamping via an M4x10 Torx screw ensures consistent tool positioning and reduced vibration. Order directly via Metav Werkzeuge or consult our specialists for application advice and fast supply. Corner Tool Head for SNHU 1206 Indexable Inserts (Teknik Makina) A robust corner cutting head designed for use with SNHU 1206 indexable inserts, optimised for stable turning and quick insert changes in workshop and production environments For SNHU 1206 indexable inserts 125 mm diameter for solid stability 40 mm bore for standard mounting M4x10 Torx clamping with T15 key Precision and stability that improve cycle consistency The large 125 mm diameter and a 40 mm bore deliver a rigid seating that reduces runout and vibration during turning operations. This stability translates into repeatable surface finish and longer insert life, which supports higher throughput on production runs. By favouring a solid mechanical interface the tool head helps maintain cutting geometry even under heavier radial loads, so setup times are shortened and machining results remain consistent across batches. Faster insert changes and secure clamping minimise downtime Clamping with an M4x10 Torx screw (key size T15) provides a reliable, torque-stable connection that simplifies indexable insert replacement. Compatibility with Palbit-type inserts and the SNHU 1206 format means insert handling is straightforward; interchangeability reduces inventory complexity. A head designed for quick, repeatable clamping supports faster maintenance cycles and less unplanned stoppage, contributing to measurable productivity gains on the shop floor. Built for workshop demands and backed by reliable supply Manufactured by Teknik Makina and supplied via Metav Werkzeuge, the component is intended for everyday use in professional turning applications. The robust construction and clear mechanical interfaces prioritise long-term uptime. Metav’s distribution from Emmerich combines broad availability with industry knowledge — a proven supply chain supported by Metav Werkzeuge’s extensive product range and market experience, which reassures procurement and engineering teams when specifying replacement or upgrade parts. Contact Metav Werkzeuge for tailored technical advice and fast delivery from Emmerich – request consulting on application fit or place a supply enquiry for Teknik Cutting Tools components via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: T621TM Manufacturer: Teknik Makina Product: Corner tool head for SNHU 1206 indexable inserts Suitable for inserts: SNHU 1206 Compatible insert manufacturer: Palbit Torx screw: M4x10 Torx key: T15 Facts Diameter: 125 mm Mount bore: 40 mm Overall length: 63 mm Cutting edges: 10 Weight: 2.708 kg Special features For SNHU 1206 indexable inserts Compatible with Palbit indexable inserts Uses M4x10 Torx clamping screw FAQ Which inserts are compatible with this head? The corner tool head is designed for SNHU 1206 indexable inserts and is compatible with inserts from Palbit as specified for the T621TM tool. What mounting interface is required? A 40 mm bore is required for mounting; the head’s 40 mm mount bore ensures standard installation in compatible toolholders. How is the insert secured? Insert clamping is achieved with an M4x10 Torx screw tightened using a T15 key to provide a secure, repeatable connection. Can this head be used for heavy-duty turning? The 125 mm diameter and robust construction offer improved stability under radial loads, supporting heavier turning operations where a rigid interface is needed. What is the article number for ordering? The article number for ordering and enquiries is T621TM from Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Turning Head for SPMT 1204 Indexable Inserts 8 Cuts, M5x12 Torx T20 - Teknik Makina
The combination of robust compatibility with SPMT 1204 indexable inserts, a stable Ø 125 mm head and secure shank Ø 40 mm mounting ensures reliable external turning performance and reduced setup time; order the indexable angle turning head directly via Metav Werkzeuge or consult our specialists for application advice. Indexable angle turning head T654TM – for SPMT 1204 inserts, Ø 125 mm (Teknik Makina) The T654TM indexable angle turning head for SPMT 1204 indexable inserts, designed for stable external turning and quick insert changes in production and workshop environments Fits SPMT 1204 indexable inserts Ø 125 mm head for stable cutting performance Shank Ø 40 mm for secure toolholder mounting M5x12 Torx screw with T20 key for fast clamping Consistent cutting results and clear compatibility The head delivers repeatable external turning thanks to its compatible interface with SPMT 1204 indexable inserts and a substantial Ø 125 mm body that reduces vibration during cuts. The design focuses on process reliability: the combination of a rigid shank with shank Ø 40 mm and a compact overall length of 63 mm gives a low overhang for improved tool life and consistent dimensional output. For operations that require frequent insert changes, the M5x12 Torx screw and corresponding T20 key enable secure, quick replacement without special tooling, keeping machine uptime high. Faster setup and lower downtime through practical design A secure clamping concept reduces the risk of misalignment and contributes directly to machining efficiency. The head's geometry, with eight cutting positions indicated in the specifications, allows extended service intervals for the cutting edges, while the moderate weight of 2.935 kg supports safe handling and straightforward mounting in standard toolposts. For production planners this translates into shorter setup cycles and predictable machining behaviour — benefits that improve throughput and reduce the potential for scrap. Simple integration and operator-friendly handling Integration into existing turning stations is aided by the standardised mounting dimensions and clear fastening detail: M5x12 Torx screw tightened with a T20 key. The compact overall length of 63 mm reduces interference and simplifies access for tool changes, while the head diameter and robust construction maintain stability under cutting forces. The result is a toolholder that is both workshop-friendly and suitable for industrial machining tasks where reliability and repeatability matter most. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools T654TM indexable angle turning head can be integrated into existing tooling fleets; call +49 2822 7131930 or email info@metav-werkzeuge.com to request application guidance from our specialists Technical data Article number: T654TM Manufacturer: Teknik Makina Product name: Indexable angle turning head (translated) Compatible inserts: SPMT 1204 Indexable Inserts eCl@ss: 21181015 Facts Head diameter: 125 mm Shank diameter (aufnahme): 40 mm Overall length: 63 mm Weight: 2.935 kg Cutting edges / positions: 8 Special features Fastening screw: M5x12 Torx Torx key: T20 Application: External turning with SPMT 1204 inserts Files: 2 associated file references (IDs available) FAQ Is this head compatible with SPMT 1204 indexable inserts? Yes. The T654TM is specified for use with SPMT 1204 indexable inserts and supports secure clamping for those insert types. What are the key mounting dimensions for the tool head? The head has a shank diameter of 40 mm, a head diameter of 125 mm and an overall length of 63 mm, suitable for standard turning toolholders that accept a 40 mm shank. Which screw and key are required for insert clamping? Insert clamping uses an M5x12 Torx screw and a T20 Torx key, allowing quick and reliable insert changes. How heavy is the turning head and how does that affect handling? The head weighs 2.935 kg, a balance between robustness and manageability that eases manual handling during tool changes while providing the mass needed for cutting stability. Can the head be used for high-feed roughing operations? The T654TM’s diameter and rigid shank improve stability for demanding external turning tasks; selection of appropriate SPMT 1204 grades and machining parameters is advised for heavy roughing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Turning Head For XNEX 0806 Indexable Inserts 90° Cutting Angle, 40mm Shank - Teknik Makina
Take advantage of robust stability and rapid insert changes to keep production running with consistent shoulder cuts; the combination of a 90° cutting angle and a Ø125 mm engagement ensures repeatable results while compatibility with XNEX 0806 indexable inserts simplifies tooling choices — order directly via Metav Werkzeuge or contact our consultants for integration advice. Corner Tool Head T848TM — 90° indexable head for XNEX 0806 inserts, Ø125 mm by Teknik Makina The Corner Tool Head is engineered for precise 90° shoulder machining with XNEX 0806 indexable inserts and is compatible with SECO and WINSTAR plate systems, making it suitable for rigid milling and facing operations. 90° cutting angle for precise shoulder cuts Diameter 125 mm for stable engagement Compatible with XNEX 0806 indexable inserts Robust 40 mm shank, 3.155 kg weight Precision for consistent shoulder finishes The holder delivers a 90° cutting angle that is defined to produce consistent shoulder and face geometries while limiting the need for rework. Designed around the XNEX 0806 insert format, the head enables simple plate indexing so that cutting edges are returned to nominal geometry quickly; this improves batch repeatability and shortens setup time. The combination of precise seating and a standardised insert interface reduces positioning variance, which is particularly beneficial in medium- to high-volume machining where cycle-to-cycle consistency is essential. Stable design built for heavy-duty cycles A 40 mm shank and a Ø125 mm head diameter give the assembly the mass and stiffness required for robust engagement at the cut, and the total weight of 3.155 kg contributes to dampening of vibration in demanding conditions. The overall length of 60 mm keeps the overhang compact, improving rigidity. Fast and secure clamping is provided via an M4x12.5 Torx screw (Torx key size T15), enabling quick plate changes with a defined torque interface. These design details mean fewer interruptions and better surface quality when processing shoulders and faces under industrial loads. Compatibility that eases tooling decisions and integration Supplied for use with XNEX 0806 plates, the head is compatible with inserts from SECO and WINSTAR, allowing straightforward procurement and interchangeability across existing tool inventories. The holder’s 90° geometry and standardised mounting ensure it can be integrated into setups that accept a 40 mm receiver without complex adaptation. For production planners, this results in reduced tooling variety and easier spare-part management, while maintenance teams benefit from predictable, standardised service procedures. Discuss integration with Metav Werkzeuge for seamless fitting and spare-part availability; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to review machine compatibility and delivery options for the Teknik Makina corner tool head T848TM Technical data Article number: T848TM Manufacturer: Teknik Makina Measurements Diameter: 125 mm Shank/receiver diameter: 40 mm Overall length: 60 mm Weight: 3.155 kg Cutting angle: 90° Number of cutting edges: 10 Compatibility & features For XNEX 0806 indexable inserts Compatible with SECO and WINSTAR plates Torx screw M4x12.5 Torx key T15 Robust construction for industrial use FAQ What insert type does the head accept? The corner tool head accepts XNEX 0806 indexable inserts; compatibility with SECO and WINSTAR plate variants is supported for flexible sourcing. Which machines will accept this holder? Machines with a 40 mm receiver or an adaptor for a 40 mm shank can accept the holder; the compact 60 mm overall length aids fitment in tight setups. How is the insert secured and indexed? Inserts are clamped using an M4x12.5 Torx screw (Torx key T15); indexing is achieved by rotating the insert to the next edge and re-clamping to restore cutting geometry. Is the holder suitable for heavy milling operations? Yes — the Ø125 mm head diameter, 40 mm shank and 3.155 kg mass provide the stiffness and damping needed for demanding shoulder and face milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Corner Turning Head For XOMX 1806 Indexable Inserts, 90° Cutting Angle, M4.5x11 Torx Screw - Teknik Makina
Benefit from a robust combination of stability and compatibility: the 40 mm tool shank and 90° cutting geometry deliver consistent corner turning and reliable insert clamping. Paired with broad compatibility for XOMX 1806 indexable inserts and SECO standards, this head streamlines tooling inventories and reduces setup time. Order via Metav Werkzeuge or consult our specialists for integration advice. Eckmesserkopf — Corner cutting head with 90° geometry for XOMX 1806 indexable inserts (Teknik Makina) A compact, heavy-duty Eckmesserkopf intended for precision turning where stable seating of XOMX 1806 indexable inserts is required in workshop and small-scale production environments *Solid 40 mm tool shank for stable clamping *Compatible with SECO XOMX 1806 inserts *90° cutting angle for precise corner turning *Ø 125 mm diameter for heavy-duty operations Reliable rigidity for consistent turning results The head is engineered to provide high stability during corner turning, reducing vibration and improving surface finish. With a solid 40 mm shank, the assembly delivers secure clamping that translates into repeatable cuts and fewer reworks. This mechanical stability lowers the risk of insert movement under load, which in turn shortens setup times and increases effective machine uptime — a pragmatic advantage for production-focused workshops. Proven compatibility and simple maintenance Designed for use with XOMX 1806 indexable inserts and compatible with the SECO insert form, the tool head simplifies tool procurement and storage. The 90° cutting geometry is optimised for corner and profiling work, making toolpath planning straightforward. Fast fixation is achieved via a Torx M4.5x11 screw with a T15 drive, enabling secure clamping with conventional workshop tooling and swift insert changes to keep operations moving. Built for practical workshop use and durability With an outer diameter of Ø 125 mm and a mass of 3.427 kg, the head is intended for robust, repeatable machining tasks rather than fine micromachining; its weight and construction support heavy cuts and stable thermal behaviour. The design prioritises straightforward handling and predictable performance: fewer surprises at set-up mean fewer interruptions to production. For teams seeking reliable corner-turning capability that integrates with established insert systems, this solution reduces logistical complexity while supporting consistent part quality. For tailored advice on integrating this Teknik Makina corner cutting head into existing toolholders and processes, contact Metav Werkzeuge — Metav’s specialists can provide application guidance and delivery from Emmerich to the workshop floor Technical data Article number: T526TM Brand: Teknik Makina Designation: Eckmesserkopf Additional designation: for XOMX 1806 Indexable Inserts ECLASS: 21181015 Core data Diameter: 125 mm Shank / clamping diameter: 40 mm Weight: 3.427 kg Overall length: 62 mm Cutting angle: 90° Number of cutting edges: 9 Special features Compatible with XOMX 1806 inserts Compatible with SECO insert form Torx screw M4.5x11 Torx drive T15 SKU: T526TM Brand origin: Teknik Makina FAQ What insert type does this head accept? The head accepts XOMX 1806 indexable inserts; the design is matched to that insert geometry for secure seating and consistent cutting. Is the head compatible with SECO inserts? Compatibility with SECO-format XOMX 1806 inserts is indicated; this eases sourcing and toolboard standardisation. What drive is required for the clamping screw? Clamping uses a Torx M4.5x11 screw with a T15 drive, allowing straightforward use of common Torx keys in the workshop. Is this head suitable for heavy cuts? With a diameter of 125 mm and a mass of 3.427 kg, the head is intended for robust corner turning and stable cutting under heavier feeds and depths. Which SKU should be referenced when ordering or inquiring? Please refer to SKU T526TM when requesting stock or technical details for this Teknik Makina corner cutting head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com