Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
100mm Face Cutter Head For SDHT 1204 Indexable Inserts 45° Cutting Angle, 114mm Max Cutting Dia, 7 Teeth, M4.5x11 Torx - Teknik Makina
Take advantage of a robust face milling solution that combines compatibility with SDHT 1204 indexable inserts, a compact 32 mm arbor, and a wide effective cutting range to keep changeovers short and productivity high — order directly via Metav Werkzeuge or consult their specialists for technical support. Face milling head T304TM — compact face milling head for SDHT 1204 indexable inserts, Ø100 mm body Face milling head T304TM delivers precise, repeatable facing operations in production and workshop environments, engineered for SDHT 1204 indexable inserts and short setup times Face milling head for SDHT 1204 inserts 100 mm body diameter, compact design Max cutting diameter Ø114 mm 7 cutting edges for extended running time High metal removal with controlled cutting geometry The milling head is configured to use SDHT 1204 indexable inserts and a 45° cutting angle, a combination that converts spindle power into efficient material removal while reducing axial load. The design supports a Ø114 mm maximum cutting diameter on a compact 100 mm body, which permits stable machining on both large and medium-sized faces. For operations that demand consistent surface quality, the angled approach reduces vibration and distributes wear across 7 cutting edges, meaning fewer unplanned stoppages and lower tooling consumption per component. Fast, secure clamping and serviceable components for steady throughput Maintenance and insert replacement are facilitated by a M4.5x11 Torx clamp screw and a T15 Torx key fit, enabling secure seating of inserts and repeatable clamping torque with workshop-standard tools. The head mounts on a 32 mm arbor, offering a rigid connection that supports higher feeds and stable cuts; the overall compactness, at 62 mm length and 2.04 kg mass, helps to keep the centre of gravity close to the spindle and limits deflection during face milling. These attributes translate into shorter setup times and predictable cycle outputs — a practical advantage for batch production and smaller job shops alike. Durable compatibility and straightforward integration into existing tool systems Designed specifically for indexable tooling, the head accepts SDHT 1204 insert geometry and can be integrated with standard toolholders that accept a 32 mm bore. The modular approach permits shops to standardise inserts across different operations, lowering inventory complexity. The construction focuses on robustness and repeatability: a compact diameter for high rigidity, a service-friendly clamp screw, and a profile that balances chip evacuation with surface finish. For teams planning frequent regrinds or tight-tolerance facing, this combination reduces process variation and supports consistent part quality. For machining enquiries about the Teknik Cutting Tools face milling head T304TM or to secure supply directly from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and prompt delivery Technical data Article number: T304TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Brand: Teknik Cutting Tools Suitable for: SDHT 1204 indexable inserts SKU: T304TM Facts Max cutting diameter: 114 mm Body diameter: 100 mm Arbor/holder diameter: 32 mm Number of cutting edges: 7 Cutting angle: 45° Overall length: 62 mm Weight: 2.04 kg Special features Torx screw M4.5x11 Torx key T15 Compact, rigid design for face milling Compatible with SDHT 1204 inserts Robust construction for workshop use FAQ What inserts are compatible with this milling head? The face milling head T304TM is specified for SDHT 1204 indexable inserts; the geometry is matched to that insert size for predictable cutting behaviour. Which arbor size is required to mount the head? Mounting requires a 32 mm arbor bore as used in standard toolholders for this head. How many cutting edges are available before a full re‑set is needed? The head accommodates 7 cutting edges, which allows wear to be distributed over multiple positions and extends operation between re‑indexing events. What torque system secures the inserts? Inserts are clamped using a M4.5x11 Torx screw, tightened with a T15 Torx key for secure, repeatable seating. Is the head suitable for heavy stock removal on large faces? With a 45° cutting angle and a Ø114 mm effective cutting diameter the head is designed for efficient face milling on medium to large surfaces while maintaining stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Cutter Head For SEET 12T3 R245 Indexable Inserts 45° Cutting Angle, M3.5x8.5 Torx T15 - Teknik Makina
Taking advantage of a 100 mm diameter head with seven cutting edges and a secure 32 mm arbor, this cutter head delivers stable material removal and repeatable surface quality for indexed-insert applications; order the cutter directly from Metav Werkzeuge or request a technical consultation from the Metav team. Planmesserkopf T437TM — face milling head, 100 mm diameter, 7 cutting edges (Teknik Makina) The Planmesserkopf T437TM is a precision face milling head engineered for high-efficiency finishing and semi‑roughing with SEET 12T3 R245 indexable inserts, suitable for CNC and toolroom operations. *Face milling head for SEET 12T3 inserts *Diameter 100 mm for robust material removal *Seven cutting edges for balanced cutting action *32 mm bore for secure spindle fit *Compatible with Sandvik, XTC, ZCC inserts Greater throughput through balanced geometry and cutting angle The cutter head’s balanced layout with seven cutting edges and a 45° cutting angle reduces vibration and distributes cutting forces evenly across the tool body. This leads to more consistent tool life per insert and a better surface finish on each pass. The geometry suits both finishing and light semi‑roughing operations where maintaining part tolerances and improving cycle times matter. By choosing a head that couples axial rake and clearance optimally, machinists benefit from predictable chip control and a reduced need for frequent rework. Secure mounting and straightforward insert replacement A 32 mm arbor provides a rigid connection to the spindle, improving concentricity and minimising runout during heavy cuts. Insert retention uses an M3.5×8.5 Torx screw tightened with a T15 key, enabling quick and safe insert changes while preserving the seat integrity. This straightforward fixing method shortens setup and maintenance times, helping shops keep machines productive and reduce non‑cutting time. Broad compatibility for flexible tooling setups Designed for SEET R245 style indexable inserts, the head is compatible with leading insert manufacturers such as Sandvik, XTC and ZCC, permitting procurement flexibility and straightforward replacement sourcing. The ability to accept widely available inserts supports cost‑effective stocking strategies and simplifies retooling across different machines or jobs without changing clamping or toolholder configurations. Practical dimensions and handling for workshop integration With a nominal diameter of 100 mm and a total length of 55 mm, the cutter head occupies minimal overhang while delivering a substantial cutting width. The unit weight of 1.715 kg keeps handling manageable for toolroom staff and reduces inertia effects in spindle dynamics compared with larger heads. These dimensions make the head suitable for compact setups where spindle clearance and tool reach must be balanced against cutting performance. Contact Metav Werkzeuge for procurement and compatibility checks on the Teknik Makina Planmesserkopf T437TM; technical advice and order processing are available from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data *SKU: T437TM Manufacturer: Teknik Cutting Tools Product: Face milling head for indexable inserts (SEET 12T3 R245) Brand: Teknik Makina Numbers / Core technical data *Diameter: 100 mm Bore / arbor: 32 mm Cutting edges: 7 Total length: 55 mm Cutting angle: 45° Weight: 1.715 kg Torx screw: M3.5×8.5 Torx key size: T15 Special features / Versions *Suitable for SEET R245 12T3 indexable inserts Compatible with Sandvik, XTC, ZCC inserts Indexable‑insert face milling head design Quick insert replacement with Torx fastening Compact overall length for reduced overhang FAQ What insert type does this cutter head accept? The cutter head accepts SEET R245 12T3 indexable inserts; compatibility with inserts from Sandvik, XTC and ZCC is specified for flexible sourcing. Is the arbor size suitable for standard toolholders? Yes, the cutter head has a 32 mm bore suitable for matching toolholders and spindles that accept a 32 mm arbor. How are the inserts secured to the cutter head? Inserts are fixed using an M3.5×8.5 Torx screw, tightened with a T15 key, providing reliable clamping and straightforward replacement. What cutting angle does the head use and why does it matter? The head features a 45° cutting angle, which helps balance radial and axial cutting forces for improved surface finish and reduced vibration. Can this head be used on compact CNC machines? With a total length of 55 mm and a moderate weight of 1.715 kg, the head is suitable for compact setups where overhang and spindle clearance are considerations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Cutter Head for SEET R245 12T3 Indexable Inserts 45° Cutting Angle, 7 Inserts, 32mm Shank - Teknik Makina
High-precision facing and broad compatibility with SEET R245 indexable inserts ensure consistent surface finish and straightforward insert replacement; the robust 32 mm shank and Ø100 mm cutter diameter support stable machining across batch runs. Order the facing head directly via Metav Werkzeuge or consult our specialists for application advice. Facing head T566TM — facing head for SEET 12T3 R245 indexable inserts, Ø100 mm, 32 mm shank (Teknik Makina) A compact facing head T566TM engineered for precise facing and light milling operations with SEET R245 12T3 indexable inserts, suitable for production and workshop environments. Compatible with SEET R245 12T3 inserts Ø100 mm cutter diameter 32 mm shank diameter Seven cutting edges, 45° cutting angle Stable machining for consistent surface quality The facing head delivers precision and repeatability through a balanced design and a standardised toolholder diameter. The combination of a 32 mm shank and a Ø100 mm cutter diameter reduces vibration during facing, which directly benefits surface finish and tool life. For operations requiring regular insert changes, the indexable system simplifies maintenance and minimises downtime while maintaining consistent cut geometry. Efficient material removal with defined geometry Designed around the SEET R245 12T3 insert geometry, the toolhead exploits the 45° cutting angle for a controlled cutting action that spreads cutting forces and lowers cutting resistance. The seven cutting edges provide incremental engagement, enabling smoother transitions and efficient heat distribution. This results in reliable chip control and predictable performance whether used for roughing passes or semi-finishing. Practical assembly and workplace integration Mounting and service are straightforward: the tool uses a Torx screw M3.5x11 together with a hex screw M5x7 and is tightened with a Torx key T15, streamlining workshop routines. At 1.812 kg the head balances rigidity with manageable handling during set-up. Compatibility with recognised insert manufacturers such as Sandvik, XTC, and ZCC ensures supply flexibility and access to a range of grades for different workpiece materials. For specification checks, ordering options or tailored application advice on the Teknik Makina facing head, contact Metav Werkzeuge in Emmerich by e-mail or phone — our specialists are available to advise on suitability and delivery. Technical Data Article number: T566TM Manufacturer: Teknik Makina Designation: Facing head for SEET 12T3 R245 Indexable Inserts Facts Cutter diameter: 100 mm Shank diameter: 32 mm Weight: 1.812 kg Cutting angle: 45° Number of cutting edges: 7 Overall length: 50 mm Torx screw: M3.5x11 Hex screw: M5x7 Torx key: T15 Special features Fits SEET R245 12T3 inserts Compatible with Sandvik, XTC, ZCC inserts U plate: TA052 Indexable insert system for fast replacement Balanced design for reduced vibration FAQ Which inserts fit this facing head? The facing head accepts SEET R245 12T3 indexable inserts and is compatible with inserts from Sandvik, XTC and ZCC. What are the principal dimensions to check for machine compatibility? Key dimensions are a 32 mm shank diameter and a Ø100 mm cutter diameter; overall length is 50 mm. What mounting hardware is required? Mounting uses a Torx screw M3.5x11 and a hex screw M5x7; assembly and torque are applied with a Torx key T15. How many cutting edges does the head provide and what is the cutting angle? The head presents seven cutting edges and a 45° cutting angle, optimised for stable facing and smooth chip flow. What is the weight of the tool head? The facing head weighs 1.812 kg, offering a balance between rigidity and ease of handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Mill For RCKT 1204 Indexable Inserts With Internal Coolant, 45° Cutting Angle - Teknik Makina
Benefit from the 100 mm diameter, internal coolant and compatibility with RCKT 1204 inserts to maintain a steady production rhythm with reduced downtime. Order the round insert face mill directly via Metav Werkzeuge or consult our specialists for application advice. 100 mm round insert face mill — internal coolant, for RCKT 1204 (Teknik Makina) The 100 mm round insert face mill is a robust milling head designed for efficient face milling with RCKT 1204 indexable inserts, suited to general machining and finishing operations. 100 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with RCKT 1204 indexable inserts Seven cutting edges with 45° cutting angle Productivity through optimised geometry and coolant The cutter combines a 45° cutting angle with seven precisely set teeth to balance chip thinning and surface finish. This geometry reduces cutting forces and spreads wear evenly across the inserts, supporting longer effective tool life and consistent part quality. Integrated internal coolant directs the lubricant precisely to the cutting zone, improving heat control and chip evacuation; the result is higher material removal rates and fewer interruptions for cleaning. Faster insert changes and secure clamping for workshop efficiency Designed for simple maintenance, the head accepts standard RCKT 1204 indexable inserts from Sandvik and uses a Torx clamping system to speed changeovers. With the specified T15 Torx interface and M3.5x8.5 screws, replacement is straightforward and repeatable, reducing machine downtime. The configuration supports predictable setup times and integrates easily into established tool-change routines on milling spindles. Rigidity, handling and application fit for everyday production With a 100 mm diameter and a total length of 52 mm, the tool offers a compact profile that favours rigidity and balance during face-milling passes. The solid construction and measured mass contribute to stable cutting behaviour and repeatable results across batches. The design is well suited to workshops seeking a reliable face-milling head that pairs conventional indexable inserts with efficient coolant delivery for controlled machining cycles. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina round insert face mill T466-1TM into production; email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and ordering proximity from Emmerich. Technical data Article number: T466-1TM Manufacturer: Teknik Makina Product type: Round insert face mill Description: Rundplattenfräser for RCKT 1204 Indexable Inserts Core specifications Diameter: 100 mm Total length: 52 mm Weight: 1.608 kg Number of cutting edges: 7 Cutting angle: 45° Special features Internal coolant Compatible with RCKT 1204 indexable inserts Compatible insert manufacturer: Sandvik Torx key: T15 Torx screw: M3.5x8.5 ECLASS: 21180902 SKU / UID: T466-1TM FAQ Is the cutter compatible with Sandvik RCKT 1204 inserts? Yes. The Teknik Makina round insert face mill accepts RCKT 1204 indexable inserts and is specified for use with Sandvik-compatible grades. Does the tool have through-coolant capability? Yes. The milling head features internal coolant that channels lubricant directly to the cutting zone for better temperature control and chip evacuation. What Torx key and screw size are required for insert changes? Insert clamping uses a T15 Torx key with M3.5x8.5 screws as specified for the head. Which machining tasks suit this type of cutter? The cutter is intended for face milling and light to medium finishing passes where stable diameters and good surface quality are required. What are the dimensional references for setup and tool balance? Key references: 100 mm diameter, 52 mm total length and a mass of 1.608 kg; use these values for spindle and holder compatibility checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Mill For RDMT 12T3 Indexable Inserts 8 Teeth, 32mm Shank - Teknik Makina
Take advantage of a robust milling solution that combines high stability, compatibility with common indexable inserts and straightforward clamping to keep machining cycles predictable and efficient; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Round Face Mill T287-1TM – indexable face mill with Ø 100 mm and 8 cutting edges by Teknik Cutting Tools A Round Face Mill T287-1TM designed for versatile milling tasks, accepting RDMT 12T3 indexable inserts and engineered for secure mounting in standard toolholders. Diameter 100 mm cutter Accepts RDMT 12T3 indexable inserts Eight cutting edges for balanced machining 32 mm mounting bore, 50 mm overall length Consistent material removal for reliable cycle times The circular cutter body delivers consistent chip removal through its 8 cutting edges, which balances radial forces and reduces vibration during face milling. This leads to improved surface finish and more predictable tool life when paired with RDMT 12T3 indexable inserts. The result is a reduction in rework and increased throughput in series production; operators and planners benefit from fewer interruptions and steadier process windows. The robust design is aimed at stability rather than experimental high-speed profiling, offering dependable performance in batch and continuous operations. Rapid, secure clamping that minimises downtime A compact mounting arrangement with a 32 mm mounting bore and a clearly specified M3.5 locking screw ensures straightforward installation and secure clamping. The required Torx fixings are a M3.5x8.5 Torx screw operated with a T15 Torx key, simplifying maintenance procedures and repeatable reassembly. This precise clamping interface reduces micro-movement at the toolholder junction, which supports repeatable accuracy across tool changes and shortens setup time between batches — a concrete operational advantage on busy production floors. Practical cutter dimensions for common machining cells With an outside diameter of 100 mm, an overall length of 50 mm and a unit mass of 1.435 kg, the cutter body balances rigidity and manoeuvrability for standard milling centres. The relatively compact profile keeps overhang modest and aids in maintaining cutter stiffness, which is beneficial when working at moderate depths of cut. Compatibility with widely used indexable inserts helps to lower tooling inventories: replacement inserts are economical compared with one-piece cutters, while the modular concept supports easy in-field restoration of cutting performance. Engineered for dependable workshop integration The tool’s interface and fixing specification follow common workshop standards, facilitating integration into existing tooling systems without the need for bespoke adapters. The use of indexable inserts reduces downtime for regrinds and allows grades to be selected according to the workpiece and cutting conditions. Clear specification of screw and key sizes supports safe maintenance practices and predictable spare-parts planning, contributing to a steadier production flow and simplified logistics for maintenance teams. For tailored advice on using the Teknik Cutting Tools Round Face Mill T287-1TM in specific machining applications, contact Metav Werkzeuge for a technical discussion or material-specific recommendations. Technical Data Article number: T287-1TM Manufacturer: Teknik Cutting Tools Type: Round face mill for RDMT 12T3 indexable inserts Facts Diameter: 100 mm Cutting edges: 8 Mounting bore: 32 mm Overall length: 50 mm Weight: 1.435 kg ECLASS: 21180902 ETIM: EC011860 Special features Accepts RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ What insert type does this cutter take? The round cutter is designed for RDMT 12T3 indexable inserts, enabling straightforward replacement and grade selection to match the workpiece. What are the key mounting dimensions to check before fitting? Verify a 32 mm mounting bore and an overall length clearance of 50 mm; these dimensions match the cutter to the toolholder and machine envelope. How many cutting edges are available and what is the benefit? The body provides 8 cutting edges, which promotes balanced cutting forces and contributes to smoother surfaces and reduced vibration. Which fasteners are required for secure clamping? Clamping uses an M3.5 locking screw and M3.5x8.5 Torx screws, operated with a T15 Torx key for secure and repeatable assembly. Is the cutter heavy to handle during tool changes? The unit weight is 1.435 kg, making it manageable for routine handling and replacement in standard production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Mill for RDMT 1604 Indexable Inserts With Internal Coolant, 7 Teeth - Teknik Makina
Take advantage of a compact, high-performance milling solution that combines a 100 mm cutting diameter with internal coolant and seven indexable cutting edges for steady material removal and reduced downtime; order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. Face milling cutter (100 mm) for RDMT 1604 indexable inserts — internal coolant, 7 cutting edges by Teknik Makina Face milling cutter for RDMT 1604 indexable inserts engineered for efficient face milling operations with internal coolant and a short overall length for secure mounting in compact toolholders 100 mm diameter for stable cutting Internal coolant for improved chip evacuation 7 indexable cutting edges for higher productivity Compatible with RDMT 1604 indexable inserts Torx T15 screws M4x10 for secure clamping Designed for reliable, high-throughput face milling The face milling cutter is optimised for consistent, repeatable performance on machining centres where surface quality and cycle time matter. With a 100 mm diameter and seven cutting edges, the tool spreads cutting forces across multiple inserts to reduce vibration and extend tool life. Compatibility with RDMT 1604 indexable inserts means quick, economical index changes and predictable cutting geometry, enabling higher feed rates and fewer tool changes for improved shop-floor productivity. Internal coolant keeps chips clear and tools cooler Built with internal coolant channels, the cutter directs cutting fluid precisely to the cutting zones to improve chip evacuation and lower insert temperatures. This reduces thermal wear and helps maintain a stable cutting edge geometry during extended cuts. For materials and operations that generate built-up edge or require controlled cooling, the internal feed improves repeatability and can contribute to longer insert life and more consistent surface finish. Fast insert changes and secure clamping cut downtime Insert retention uses Torx T15 drive hardware with M4x10 screws, providing a robust and repeatable clamping torque for each indexable tip. The standardised screw interface simplifies maintenance and allows for quick, safe insert replacement without specialised tooling. As a result, set-up times are reduced and throughput is improved, which is particularly beneficial in batch production or scheduled tool-change regimes. Practical applications and purchaser benefits This tool is suited to face milling tasks where a compact overall length and dependable coolant supply are required. The combination of multiple cutting edges and rigid mounting delivers smoother surfaces and higher metal removal rates, supporting lean production aims. For purchasers, the milling head represents a pragmatic balance between performance and serviceability, and the Metav supply chain ensures reliable stock handling and straightforward replenishment for uninterrupted production. Contact Metav Werkzeuge for tailored machining advice and fast supply of the Teknik Makina face milling cutter (SKU T275-1TM); technical enquiries by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T275-1TM Manufacturer: Teknik Makina Product type: Face milling cutter (Rundplattenfräser) Compatible inserts: RDMT 1604 SKU / Label: 100mm Rundplattenfräser RDMT 1604 L52mm mit Innenkühlung Facts Diameter: 100 mm Overall length: 52 mm Cutting edges: 7 Weight: 1.374 kg eClass: 21180902 Special features Internal coolant Torx T15 fastening Torx screws M4x10 Designed for indexable inserts RDMT 1604 FAQ What inserts does this cutter accept? The cutter is designed for RDMT 1604 indexable inserts and delivers stable geometry and easy indexing for those insert types. How does the internal coolant benefit machining? Internal coolant supplies fluid directly to the cutting zone; with the Teknik Makina face milling cutter this improves chip evacuation and reduces insert temperature for longer cutting intervals. How are the inserts secured? Inserts are retained using Torx T15 screws with M4x10 fasteners to provide consistent clamping and straightforward replacement. Is this tool suitable for high-feed face milling? The multiple cutting edges and rigid design make this cutter appropriate for higher feed rates within the limitations of the selected insert grade and machine rigidity. Where can I get more technical information or spare parts? Metav Werkzeuge maintains stock and can advise on insert grades and spare fasteners for the Teknik Makina cutter (SKU T275-1TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Mill for RPMT 1204 Indexable Inserts With Internal Coolant, 7 Teeth - Teknik Makina
Take advantage of a robust face‑milling solution that combines internal coolant, a 100 mm cutting diameter and seven cutting edges for steady material removal; order the T714‑1TM directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. T714-1TM indexable insert face mill by Teknik Makina — 100 mm, internal coolant A compact face milling head, the T714‑1TM is engineered for efficient face milling with RPMT 1204 indexable inserts and integrated coolant supply. 100 mm diameter for stable face milling Internal coolant for improved chip evacuation Seven cutting edges for high material removal Compatible with RPMT 1204 Korloy inserts Consistent productivity through design and coolant control The face milling head delivers a predictable machining cycle thanks to its 100 mm diameter and seven cutting edges, which together increase the effective cutting engagement and distribute cutting forces evenly. The integrated internal coolant reduces heat at the cutting zone and supports controlled chip formation, which helps to maintain tool life and surface quality. This configuration is aimed at optimising throughput in medium‑duty production runs where cycle time and component consistency are primary concerns. Fast setup and secure clamping for reliable operation Designed for straightforward assembly, the milling head uses M4x8.5 Torx screws and a T15 Torx key for secure insert fastening, minimising downtime during tool changes. The overall length 53 mm and a mass of 1.278 kg contribute to a compact, rigid tool package that resists vibration under typical face‑milling conditions. Compatibility with standard RPMT 1204 inserts from Korloy simplifies stocking and reduces the number of different insert types required in the workshop, supporting efficient tool management. Application focus and maintenance considerations This indexable face mill is best deployed where broad face contact and reliable chip evacuation are required. The head accepts RPMT 1204 indexable inserts and is therefore suited to workflows that favour replaceable cutting edges for cost‑effective resurfacing. Routine maintenance is limited to insert replacement and screw torque checks; the internal coolant port helps keep the cutting zone clear, reducing manual chip clearing and helping to protect the clamping surfaces. The result is lower unplanned downtime and a predictable service interval for machining operations. For tailored advice on integrating the T714‑1TM into an existing toolset and to secure prompt supply from Emmerich, contact Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data SKU: T714-1TM Label: 100mm Rundplattenfräser RPMT 1204 L53mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21180902 Core data Diameter: 100 mm Overall length: 53 mm Weight: 1.278 kg Number of cutting edges: 7 Torx screw: M4x8,5 Torx key: T15 Special features Internal coolant: yes Compatible inserts: RPMT 1204 indexable inserts Compatible insert manufacturer: Korloy Category: Planmesserkopf FAQ Which indexable inserts fit this face mill? The T714‑1TM accepts RPMT 1204 indexable inserts; Korloy inserts in that specification are suitable and commonly used with this head. Is the milling head coolant‑fed internally? Yes, the face mill features internal coolant to support chip evacuation and reduce thermal load at the cutting zone. How many cutting edges are active on the tool? The cutter is equipped with seven cutting edges, optimised for steady material removal and balanced cutting forces. What size and type of screws are required for insert clamping? Insert clamping is performed with M4x8.5 Torx screws using a T15 Torx key, ensuring secure fastening and rapid replacement. What are the primary benefits of using this face mill in production? The head provides a broad cutting contact area (100 mm diameter), reliable coolant delivery and seven insert positions for extended on‑tool time and consistent surface finish with predictable maintenance intervals. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Mill for RPMT 1606 Indexable Inserts With Internal Coolant, 55mm Overall Length - Teknik Makina
Combine the robust cutting performance of a 100 mm diameter head with the precision of RPMT 1606 indexable inserts and integrated internal coolant for consistent cycle times and improved tool life; order the face milling cutter directly via Metav Werkzeuge or request advice from our consultants if required. Rundplattenfräser – face milling cutter, 100 mm diameter, internal coolant (Teknik Makina) A Rundplattenfräser engineered for face milling with RPMT 1606 indexable inserts, offering stable material removal and reliable coolant delivery for demanding production and finishing operations 100 mm diameter for broad material contact Integrated internal coolant for improved cooling Seven cutting edges for steady material removal Compatible with Korloy RPMT 1606 inserts Faster material removal with consistent surface finish The combination of a 100 mm diameter cutting head and 7 cutting edges ensures efficient engagement with the workpiece, reducing cycle times while maintaining surface quality. Using RPMT 1606 indexable inserts provides the flexibility to rotate or replace worn edges quickly, which minimises downtime and keeps machining schedules predictable. Indexable inserts separate the cutting edge from the body of the tool, meaning blunt edges are exchanged rather than the entire cutter—this lowers consumable costs and streamlines maintenance in volume production environments. Controlled cooling at the cutting zone for longer life Built-in internal coolant channels direct fluid closer to the cutting interface, improving heat removal and chip control compared with external flood cooling alone. This targeted coolant delivery reduces thermal stress on the insert and the tool body, leading to a longer service life and fewer unscheduled tool changes. Fastening integrity is ensured by M5x12 Torx screws with a T20 drive, which provide secure insert clamping and repeatable seat seating; this mechanical stability supports consistent cutting forces and dimensionally reliable components. Designed for straightforward integration into production With an overall length of 55 mm and a compact mass, the milling head slots easily into existing toolsetups while delivering the rigidity required for face milling operations. The cutter’s construction supports compatibility with Korloy RPMT 1606 inserts, simplifying procurement and stocking. Supplied under the Teknik Makina range, the tool benefits from a clear part identity and consistent manufacturing standards, enabling buyers to plan inventory and replacement strategies with confidence and to reduce supplier complexity across the workshop. Contact Metav Werkzeuge for tailored application advice on Teknik Makina face milling cutters and to discuss delivery options or technical specifications via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T719-1TM Name: 100 mm face milling cutter for RPMT 1606 with internal coolant Manufacturer: Teknik Makina EClass: 21180902 Core dimensions Diameter: 100 mm Overall length: 55 mm Weight: 0.584 kg Cutting edges: 7 Special features Internal coolant Compatible inserts: RPMT 1606 Compatible insert manufacturer: Korloy Torx key: T20 Torx screw: M5x12 FAQ Which indexable inserts fit this cutter? The Rundplattenfräser is designed for RPMT 1606 indexable inserts; Korloy inserts in this designation are compatible and provide the correct seat geometry for secure clamping. Does the internal coolant require special machine fittings? Internal coolant delivery is supported when the machine spindle or holder provides a coolant supply; the cutter’s internal channels guide fluid to the cutting zone for improved heat and chip control. How are the inserts secured and maintained? Inserts are fastened with M5x12 Torx screws using a T20 drive; secure torque and regular seat inspection ensure repeatable clamping and consistent machining performance. Is this cutter suitable for general face milling and finishing? Yes—the combination of a 100 mm diameter head, multiple cutting edges and internal coolant makes the milling head suitable for both material removal and finishing tasks where stable cuts and surface quality are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Face Mill Head for ONMX 0806 Indexable Inserts 45° Cutting Angle, 7 Teeth, 50mm Overall Length - Teknik Makina
Benefit from precise, repeatable face milling with a compact tool head that combines a Ø100 mm cutting diameter, 45° cutting angle and compatibility with ONMX 0806 indexable inserts for consistent surface quality. Order the face milling head directly via Metav Werkzeuge or consult our specialists for integration advice. Face milling head for ONMX 0806 indexable inserts, Ø100 mm, 45° cutting angle – Teknik Makina A robust face milling head engineered for finishing and light face-cutting applications using ONMX 0806 indexable inserts. Ø100 mm cutting diameter 45° cutting angle for versatile cutting Compatible with ONMX 0806 inserts Ø32 mm tool shank Torx M5x12 clamping screw Improved surface results with standardised ONMX 0806 inserts The face milling head delivers consistent finish quality by using industry-standard ONMX 0806 indexable inserts. The combination of a 45° cutting angle and a substantial Ø100 mm diameter enables balanced chip formation and reduced cutting forces, which supports smoother surfaces on a variety of workpieces. With 7 cutting edges distributed around the head, the cutter maintains productive engagement while helping to extend individual insert life; this yields predictable machining results and reduces rework in serial production. Fast maintenance and secure clamping to reduce downtime Clamping and servicing are engineered for speed and repeatability: the head uses a Torx M5x12 clamping screw tightened with a T20 key, allowing quick insert changes and reliable retention under machining loads. The Ø32 mm shank and compact overall length 50 mm make the unit straightforward to mount in standard toolholders, while the measured mass (1.067 kg) ensures stable running without excessive tool overhang. These attributes together minimise setup time and support continuous operation in busy workshops and CNC cells. Broad compatibility for flexible production workflows Designed for compatibility with insert lines from ISCAR, Korloy, LMN and YG‑1, the head suits procurement strategies that favour readily available cutting parts and cross-brand interchangeability. The modular concept supports straightforward replacement of worn inserts and adapts well to mixed-machine fleets. For production planners and toolroom managers, the design delivers a pragmatic balance of availability, maintainability and machining performance that helps streamline tooling inventories and shorten lead times. For specific technical integration, tooling recommendations or to order the Teknik Cutting Tools face milling head (SKU T784TM), contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: T784TM Designation: Face milling head for ONMX 0806 indexable inserts Brand: Teknik Makina Facts Diameter: Ø100 mm Shank diameter: Ø32 mm Overall length: 50 mm Weight: 1.067 kg Cutting angle: 45° Cutting edges: 7 Clamping screw: M5x12 Torx key: T20 Special features Compatible inserts: ONMX 0806 Compatible insert manufacturers: ISCAR, Korloy, LMN, YG‑1 Compact design for tight tool setups Quick-change Torx clamping system FAQ What inserts are required for this face milling head? The face milling head is designed for ONMX 0806 indexable inserts; compatible manufacturers include ISCAR, Korloy, LMN and YG‑1. How is the insert secured and what tool is needed? Inserts are secured with an M5x12 Torx screw; a T20 Torx key is used for tightening and removal. Which toolholder shank fits this cutter head? The cutter head accepts a tool shank diameter of Ø32 mm, allowing mounting in holders that accommodate this dimension. How many cutting edges are available on the head? The head features 7 cutting edges, arranged to balance material removal and surface finish during face milling. Is the head suitable for heavy roughing operations? The design is optimised for finishing and light face-cutting; for heavy roughing, evaluation against specific machine power and cutting parameters is recommended. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Face Milling Cutter For APKT 1604 And APXT 1003 Indexable Inserts, 6 Inserts 75° Cutting Angle, 32mm Shank - Teknik Makina
Benefit from robust face milling performance combined with broad insert compatibility and secure, repeatable clamping for reduced downtime and reliable surface finishes. Order the face milling head directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Planmesserkopf — Face milling head, Ø100 mm, for APKT 1604 / APXT 1003 (Teknik Makina) The Planmesserkopf is a precision face milling head engineered for high-efficiency metal removal in milling and production environments; it is specially configured for use with APKT 1604 and APXT 1003 indexable inserts. Face milling head for APKT 1604/APXT 1003 inserts 100 mm diameter for stable metal removal Six cutting edges for high material removal 32 mm shank, secure toolholder fit Consistent heavy-duty milling performance and productivity gains The face milling head delivers a combination of Ø100 mm working diameter and six cutting edges, which together increase material removal rates while keeping cutting forces balanced. This geometry, with a defined 75° cutting angle, reduces vibration and promotes a consistent chipbreak pattern, which translates into smoother surfaces and less rework. For production lines where cycle time matters, the head’s design supports steady feed rates and predictable tool life, providing a measurable improvement in throughput without compromising finish quality. Secure mounting and efficient insert changeover Mounting and maintenance are simplified by the 32 mm toolholder interface and the dedicated fastening hardware. The head uses an M4x10 Torx screw and is tightened with a T15 Torx key, ensuring repeatable clamping torque and minimal setup variation between tool changes. Compatibility with Korloy indexable inserts and standard APKT 1604 / APXT 1003 geometries means replacement stock is straightforward to manage. The combination of standardised fixing and widely available inserts reduces downtime during tool swaps and simplifies inventory control. Built for workshop reliability and versatile application Constructed for robust everyday use, this milling cutter head balances mass and rigidity — weighing approximately 1.587 kg — to resist chatter under higher material removal conditions. The tool’s overall length of 52 mm keeps the centre of gravity close to the spindle, aiding stability for face milling on castings, plates and blocks. Where reliability and repeatability are required, the design supports long runs and predictable maintenance intervals while remaining suitable for a wide range of conventional workshop operations. Secure the Teknik Makina face milling head (SKU T312TM) via Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com to confirm compatibility and arrange rapid delivery from Emmerich Technical Data SKU: T312TM Manufacturer: Teknik Makina Article: Planmesserkopf — for APKT 1604 and APXT 1003 Indexable Inserts Core specifications Diameter: 100 mm Number of cutting edges: 6 Shank diameter: 32 mm Overall length: 52 mm Cutting angle: 75° Weight: 1.587 kg Special features Torx screw: M4x10 Torx key: T15 Fits Korloy inserts Compatible inserts: APKT 1604, APXT 1003 FAQ Which indexable inserts are compatible with the face milling head? The face milling head accepts APKT 1604 and APXT 1003 indexable inserts; compatibility with Korloy-manufactured inserts is confirmed for these insert types. What are the key dimensions to check for machine compatibility? Check the 100 mm cutter diameter and 32 mm shank diameter; the overall length is 52 mm, which helps determine clearance and spindle overhang. How is the insert clamped and which tool is needed for replacement? Inserts are secured using an M4x10 Torx screw that requires a T15 Torx key for reliable tightening and repeatable changeovers. Is the head suitable for heavy material removal and stable finishing? Yes — with six cutting edges and a 75° cutting angle, the tool is designed to provide stable cutting conditions and consistent surface finishes under typical face milling loads. What should be considered for inventory and replacement parts? Maintain stock of APKT 1604 / APXT 1003 inserts and M4x10 Torx screws; the head’s use of common insert geometries facilitates straightforward spare-parts management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Cutter for RPMW 1606 Indexable Inserts, 7 Flutes, 55mm Height, M5x12 Fixing - Teknik Makina
Take advantage of robust cutting performance and stable clamping for consistent production results — the combination of a 100 mm cutting diameter and seven cutting edges reduces cycle time while maintaining surface quality. Order the T719TM face mill directly via Metav Werkzeuge or ask the Metav consultants for substrate and insert compatibility. T719TM Face Mill – Indexable face mill for RPMW 1606 inserts, Ø100 mm, 7 cutters | Teknik Makina T719TM Face Mill is a purpose-built indexable milling cutter designed for RPMW 1606 inserts, delivering productive facing and shoulder milling in CNC and conventional operations. Ø100 mm cutting diameter Seven cutting edges for increased productivity 32 mm shank for stable mounting Compatible with RPMW 1606 Korloy inserts Faster cycle times with consistent material removal The T719TM capitalises on a 100 mm cutting diameter and seven cutting edges to increase material removal per revolution, which translates into fewer passes and shorter cycle times on batch jobs. The use of indexable inserts (RPMW 1606) means that cutters can be restored to full cutting condition by rotating or replacing the insert rather than regrinding a solid tool, lowering ongoing tooling costs. For operations seeking a measurable increase in throughput, this configuration provides a clear productivity advantage while maintaining predictable cutting forces. Secure clamping and vibration control for better surface finish A 32 mm arbor diameter provides a rigid connection between spindle and cutter, improving run-out tolerance and reducing chatter during heavier cuts. The cutter secures inserts with an M5x12 Torx screw (Torx key size T20), ensuring repeatable insert seating and torque. The assembly’s overall height of 55 mm contributes to axial stability and consistent cutter geometry, which helps achieve a uniform surface finish and extends insert life by avoiding micro-movement under load. Flexible insert strategy for different applications This cutter accepts RPMW 1606 inserts in the KRLY designation, a solution that allows selection of grades suited to finishing, semi-finishing or higher-feed operations. By pairing the tool body with inserts tailored to the workpiece material and cutting parameters, customers gain an adaptable tool system rather than a single-purpose cutter. The indexable approach reduces downtime for tool changes and simplifies stockkeeping, making toolroom logistics more efficient without sacrificing machining quality. Ready for production supply and technical advice Metav’s distribution model provides reliable access to spare screws, keys and compatible inserts, and the T719TM is delivered as a workshop-ready cutter body that integrates with standard RPMW 1606 insert inventories. For procurement and planning, Metav’s role as a precision supply partner ensures consistent availability and a straightforward replacement path for consumables, contributing to uninterrupted production and predictable lead times. Contact Metav Werkzeuge for detailed compatibility advice and to confirm the best insert grade for the intended application of the Teknik Makina T719TM face mill Technical data Article number: T719TM Manufacturer: Teknik Makina SKU: T719TM Compatible inserts: RPMW 1606 Facts Diameter: 100 mm Overall height: 55 mm Cutting edges: 7 Shank diameter: 32 mm Special features Compatible with RPMW 1606 indexable inserts Insert designation: KRLY Torx screw: M5x12 Torx key size: T20 Indexable face mill body by Teknik Makina FAQ Which inserts fit this face mill? The face mill accepts RPMW 1606 indexable inserts; the tool body is specified for the KRLY-style inserts produced by Korloy and similar manufacturers. How is an insert secured in the cutter? Inserts are fixed with an M5x12 Torx screw using a T20 key, providing repeatable clamping and stable seating for the RPMW 1606 inserts. What benefits do seven cutting edges provide? Seven cutting edges distribute the cut among more teeth, increasing material removal per rev and smoothing cutting forces, which reduces cycle time and helps maintain a consistent finish. Is the tool suitable for heavy machining? The robust 32 mm shank and secure insert clamping make the cutter suitable for moderate to heavy facing operations when used with the correct insert grade and appropriate cutting parameters. Where can replacement parts and inserts be sourced? Replacement screws, keys and RPMW 1606 inserts compatible with this cutter body are available through Metav Werkzeuge and their authorised distribution channels. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Cutter for SNKX 1206 Indexable Inserts, 45° Cutting Angle, 8 Inserts, 32mm Shank - Teknik Makina
Take advantage of a compact, high-stability design and proven compatibility with SNKX 1206 indexable inserts; the combination of a 45° cutting angle and Ø100 mm body delivers efficient face milling and predictable surface finish. Order directly via Metav Werkzeuge or ask the consultants for application advice. Face milling head T330TM by Teknik Makina — face milling head for SNKX 1206 indexable inserts, 45° cutting angle A robust face milling head T330TM designed for secure fitting of SNKX 1206 indexable inserts in general and finishing milling operations Compatible with SNKX 1206 indexable inserts Ø100 mm body diameter 45° cutting angle for versatile milling 32 mm arbor diameter for standard toolholders Consistent cutting performance for production workflows The T330TM face milling head is engineered to offer consistent cutting performance in batch and single-part production. The 45° cutting angle reduces cutting forces while maintaining effective material removal, which supports stable feeds and longer insert life. With a 113 mm max cutting diameter and a compact body of Ø100 mm, the head combines accessible reach with predictable cutting behaviour, enabling more efficient cycle planning and reduced rework. Fast set-up and broad tooling compatibility Designed for modern tooling systems, the head accepts SNKX 1206 indexable inserts and is compatible with insert brands such as Böhlerit, Korloy and Palbit. The 32 mm arbor accommodates standard arbors and clamping systems; the included Torx screw specification M4x12.5 with key T15 simplifies secure insert mounting. Explaining the term: indexable inserts are replaceable cutting tips that allow quick tool renewal without reclamping the entire head, which shortens downtime and keeps production flowing. Durable design that supports workshop efficiency With 8 cutting edges, a balanced geometry and a total length of 52 mm, the head is dimensioned for robust chip evacuation and even wear distribution. The measured weight of 1.926 kg contributes to stable spindle dynamics without excessive inertia. These features translate into fewer tool changes and consistent surface quality across runs, making the T330TM a practical choice where repeatability and uptime are priorities. For tailored advice on integrating Teknik Cutting Tools' T330TM face milling head into existing toolholders, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — consultation and procurement support available. Technical data SKU: T330TM Manufacturer: Teknik Makina Designation: Planmesserkopf Secondary designation: for SNKX 1206 Indexable Inserts Facts Diameter (body): 100 mm Max. cutting diameter: 113 mm Arbor/holding diameter: 32 mm Total length: 52 mm Weight: 1.926 kg Cutting angle: 45° Number of cutting edges: 8 Torx screw: M4x12.5 Torx key: T15 Special features Suitable for SNKX 1206 indexable inserts Compatible with Böhlerit, Korloy, Palbit inserts Indexable-insert mounting for quick replacement Balanced geometry for stable milling FAQ What insert type does the T330TM accept? The T330TM face milling head is configured for SNKX 1206 indexable inserts and supports inserts from Böhlerit, Korloy and Palbit. What arbor diameter is required for mounting? Mounting requires a 32 mm arbor, which fits standard toolholders used in many milling spindles. How does the 45° cutting angle affect machining? A 45° cutting angle reduces radial cutting forces and promotes smoother engagement, improving surface finish and extending insert life under comparable cutting conditions. How many cutting edges are available on the head? The head is designed with 8 cutting edges, providing balanced load distribution and efficient chip removal during face milling. Is the T330TM suitable for larger face milling operations? With a 113 mm max cutting diameter the T330TM covers many medium-sized face milling tasks while remaining compact for versatile setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Cutter For SNMX 1206 Indexable Inserts 8 Cutting Edges, 88° Cutting Angle, 32mm Shank - Teknik Makina
Take advantage of a robust planing cutter head that combines a 100 mm diameter, eight cutting edges and secure Torx clamping for consistently high material removal rates; order directly via Metav Werkzeuge or request advice from our consultants for seamless integration. Planing cutter head T346TM – 100 mm diameter, 8 cutting edges (Teknik Makina) The planing cutter head T346TM is a compact face-milling solution designed for use with SNMX 1206 indexable inserts, suitable for general-purpose and medium-duty finishing operations 100 mm diameter for high material removal Eight cutting edges for consistent surface finish 32 mm shank for secure toolholder mounting Torx M4x12.5 clamping with T15 key Boosted throughput with wide engagement and indexable inserts The combination of a 100 mm diameter and eight cutting edges ensures a larger engagement area per revolution, which translates into improved productivity on batch work and shorter cycle times. Compatibility with SNMX 1206 indexable inserts allows quick insert replacement without regrinding, keeping machines running and downtime low. Inserts are the wear part; the cutter head provides the stable platform that enables repeatable results and predictable tool life. Stable clamping and quick, repeatable insert changes Secure fixing is achieved via an M4x12.5 Torx clamping screw operated with a T15 key, providing reliable seating of the insert and minimising vibration. The 32 mm mounting bore offers a rigid connection to standard toolholders, and the cutter’s mass (approx. 1.688 kg) contributes to steadiness during cutting. Together these features reduce chatter, improve surface finish and simplify indexable-insert changes—benefits that are immediately measurable at the shop-floor level. Accurate face results and compact integration into toolsets A near-orthogonal 88° cutting angle gives a well-balanced cut geometry for flat surfaces, while the 50 mm overall length keeps the assembly compact for close work and multi-tool turrets. The toolhead’s design supports reliable face milling and finishing tasks where dimensional consistency matters. Where retrofit or new-tool planning is required, the T346TM integrates without extensive setup changes and complements existing insert stocks for efficient tool management. Discuss application needs with Metav Werkzeuge — technical advisors are available to confirm fitment, recommend inserts and support specification choices; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T346TM Designation: Planing cutter head for SNMX 1206 indexable inserts Manufacturer: Teknik Makina Suitable for: SNMX 1206 indexable inserts Compatible insert maker: Korloy Diameter: 100 mm Cutting edges: 8 Mounting bore: 32 mm Cutting angle: 88° Overall length: 50 mm Weight: 1.688 kg Clamping screw: M4x12.5 (Torx T15) Facts Diameter: 100 mm Cutting edges: 8 Mounting bore: 32 mm Overall length: 50 mm Weight: 1.688 kg Cutting angle: 88° Special features Torx clamping: M4x12.5 Torx key: T15 Compatible with Korloy inserts Suitable for SNMX 1206 indexable inserts SKU: T346TM FAQ What insert type fits this cutter head? The cutter head accepts SNMX 1206 indexable inserts; compatibility is stated for the toolhead T346TM and aligns with common SNMX 1206 geometries. How is the insert secured in the head? Inserts are clamped with an M4x12.5 Torx screw, tightened using a T15 key, which provides a secure, repeatable seating to reduce the risk of movement under load. Which toolholder diameter is required? The head requires a 32 mm mounting bore for secure attachment to standard toolholders and collet systems. What surface result can be expected from the geometry? The 88° cutting angle produces a near-planar engagement that favours flat face milling and consistent surface finish with reduced radial cutting forces. Is the head suitable for automated turret systems? With a 50 mm overall length and standard mounting, the T346TM integrates readily into turrets and multi-spindle setups where compact tool assemblies are needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Cutter for WNMX 1305 Indexable Inserts, 6 Cutting Edges, Internal Coolant - Teknik Makina
Combining 100 mm diameter, internal coolant and compatibility with WNMX 1305 indexable inserts, this face milling solution delivers efficient material removal with reduced downtime and improved surface quality. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. T689-1TM 100 mm face milling head by Teknik Makina – with internal coolant and WNMX 1305 compatibility T689-1TM 100 mm face milling head by Teknik Makina is a compact milling head designed for economical face machining with indexable inserts in industrial and workshop environments. 100 mm diameter for broad face milling Internal coolant for improved chip control Designed for WNMX 1305 indexable inserts Six cutting edges for efficient material removal Torx T15 screws with M4x10 fixation Consistent productivity with indexable inserts and six cutting edges The face milling head is engineered for continuous, repeatable production where short changeover times matter. Accepting WNMX 1305 indexable inserts, the cutter body uses six cutting edges to spread cutting forces and increase material removal rates while reducing tool changes. This configuration lowers per-part tooling costs and supports a steady production rhythm, making the assembly suitable for batch work and repetitive finishing operations. The modular insert system simplifies inventory since a single insert type can service multiple cutter bodies. Internal coolant improves tool life and surface quality A built-in internal coolant channel directs cutting fluid close to the cutting zone, which aids chip control and helps maintain cutting edge integrity under load. For operations that demand consistent finishes, targeted coolant reduces heat and prevents built-up edge, leading to more reliable surface quality and longer insert life. For customers less familiar with coolant-fed tools: internal coolant ensures the fluid reaches the insert flank and rake more effectively than external nozzles, improving lubrication and evacuation without complex setup changes. Robust dimensions for stability and accurate machining With a 100 mm diameter and a compact 50 mm overall length, the milling body balances stiffness and accessibility. The compact geometry limits overhang and improves rigidity, which reduces vibration and contributes to tighter tolerances on the finished component. This design is particularly beneficial where surface integrity and dimensional repeatability are required, such as finishing operations and precise facing tasks on medium-sized workpieces. Fast clamping and straightforward maintenance to reduce downtime Maintenance and insert changes are straightforward: clamping is achieved with Torx T15 drive screws (M4x10), providing secure fixation and quick exchange of inserts without specialised tooling. The head is compatible with inserts from established suppliers, including Korloy, which simplifies supply logistics. The accessible clamping system and standardised fasteners keep service intervals short and lower the overhead associated with tool upkeep. For application matching, drawing requests or to confirm suitability for specific materials, contact Metav Werkzeuge for tailored advice and order handling: info@metav-werkzeuge.com — Tel. +49 2822 7131930 Technical data Article number: T689-1TM Label: 100 mm face milling head for WNMX 1305 with internal coolant Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 50 mm Weight: 1.625 kg Cutting edges: 6 Special features Internal coolant Compatible with WNMX 1305 indexable inserts Suitable for Korloy inserts Torx T15 drive, M4x10 screws FAQ Which insert type fits this milling head? The milling head accepts WNMX 1305 indexable inserts; compatibility is specified for that insert geometry. Is internal coolant integrated in the tool body? Yes — the tool includes internal coolant, routed to the cutting zone to support chip evacuation and extend insert life. How many inserts are fitted per head? The cutter body carries six cutting edges, allowing distributed cutting forces and efficient material removal. What fastening hardware is required for insert fixation? Insert fixation uses Torx T15 drive screws with M4x10 dimensions for secure clamping. Who manufactures the tool and what is the SKU? The tool is produced by Teknik Makina; SKU/Article number: T689-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Cutter Head For 100° ENMX 0905 Indexable Inserts, Mount Ø32mm, 10 Inserts - Teknik Makina
Take advantage of the combination of robust cutting geometry, secure 32 mm mounting and broad 100 mm diameter for consistent face milling performance; order directly via Metav Werkzeuge or consult the technical team for compatibility and stock information. Face-milling head T704TM by Teknik Makina — 100° cutting geometry, for ENMX 0905 indexable inserts The Face-milling head T704TM is a precision cutter head designed for face milling with ENMX 0905 indexable inserts and a 100° cutting geometry, suitable for workshop and industrial milling applications 100 mm diameter for high area coverage Compatible with ENMX 0905 indexable inserts 32 mm shank diameter for secure mounting 100° cutting angle for controlled chip flow High-volume material removal with consistent stability The design provides a wide cutting platform with a 100 mm diameter that spreads cutting forces and reduces individual insert load. With 10 cutting edges arranged around the periphery and a 100° cutting angle, the head is engineered for even wear distribution and predictable chip formation. The 32 mm bore ensures a tight fit in standard toolholders, which improves runout stability and repeatability on production machines. These characteristics together support efficient, measurable cycle times and lower frequency of tool changes. Rapid insert replacement and maintenance-friendly fastenings Serviceability is simplified by standardised fastening: the cutters are secured with M3.5x8.5 Torx screws accessible with a T10 Torx key, enabling quick index changes and routine checks without specialised tooling. The head accepts ENMX 0905 inserts and is compatible with YG-1 manufactured plates, facilitating fast replenishment from common suppliers. This reduces unplanned downtime and keeps set-up times predictable, helping to maintain throughput in busy shops. Durable construction that supports production reliability The assembly is built to industrial tolerances with an overall compact profile (total height 63 mm) that balances stiffness and accessibility at the cutter edge. The combination of robust mounting, standardised insert geometry and manufacturer-graded components from Teknik Makina results in a component that integrates well into existing tool inventories and fixturing systems. Where process stability and repeatability matter, the head presents a pragmatic choice for operations seeking controlled chip evacuation and consistent surface finish For technical clarification on the T704TM face-milling head, spare-part compatibility or to reserve stock, contact Metav Werkzeuge in Emmerich by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and procurement support Technical data Article number: T704TM Manufacturer: Teknik Makina Diameter: 100 mm Shank bore: 32 mm Overall height: 63 mm Cutting edges: 10 Cutting angle: 100° Fastening screws: M3.5x8.5 Torx key: T10 Special features Compatible with ENMX 0905 indexable inserts Compatible with YG-1 insert manufacturer SKU: T704TM 100° face-milling geometry FAQ What insert type does this milling head accept? The T704TM face-milling head accepts ENMX 0905 indexable inserts and is compatible with inserts from the manufacturer YG-1. Which toolholder size is required for mounting? The cutter head requires a toolholder with a 32 mm bore for secure mounting and accurate clamping. How are the inserts secured and exchanged? Inserts are secured with M3.5x8.5 Torx screws; a T10 Torx key is used for removal and refitting to enable rapid index changes. Is the T704TM suitable for high-production environments? The combination of a 100 mm diameter, 10 cutting edges and a 100° cutting angle yields stable cutting conditions aimed at production-focused milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Cutter Head for ODHT 0605 Indexable Inserts, 43° Cutting Angle, 7 Inserts, M5x12 Torque Screw - Teknik Makina
Take advantage of robust face-milling performance, precise mounting and fast insert changes: the combination of a Ø100 mm cutting diameter, 7 cutting edges and a 32 mm shank delivers high material removal rates with stable clamping. Order this tool via Metav Werkzeuge or consult the technical team for application-specific advice. Planmesserkopf — face-milling cutter head, Ø100 mm, for ODHT 0605 indexable inserts (Teknik Makina) The Planmesserkopf is a face-milling cutter head engineered for short-cycle finishing and medium-duty roughing with ODHT 0605 indexable inserts, suited to CNC milling centres and machining stations. *Ø100 mm diameter for broad face milling *7 cutting edges for efficient material removal *Compatible with ODHT 0605 indexable inserts *32 mm shank diameter for secure mounting High-capacity face milling that shortens cycle times The cutter head combines a Ø100 mm cutting diameter with 7 cutting edges and a 43° cutting angle to increase removed volume per pass while preserving surface quality. The steeper 43° inclination reduces radial cutting forces and spreads cutting load over multiple inserts, which lowers vibration and extends tool life. This geometry is advantageous for operations where stable chip formation and predictable wear progression are required, supporting faster feed rates and improved productivity on batch and single-part production runs. Secure clamping and simple insert retention for reliable runs A robust 32 mm shank provides a rigid connection to standard tool holders, reducing deflection under load and improving concentricity. Inserts are clamped with an M5x12 Torx screw, tightened using a T20 key, enabling repeatable torque application and quick replacement of indexable inserts. The tool's mass of 1.765 kg contributes to damping cutting vibrations without compromising handling during set-up. The result is a toolhead that simplifies fixture alignment and reduces unplanned downtime caused by marginal clamping. Compatible system and practical workshop integration Designed specifically for ODHT 0605 indexable inserts and compatible with Walter insert standards, this cutter head integrates into existing tooling systems without the need for special adaptors. The compact overall length of 52 mm and standard interface make it suitable for many milling configurations where space and access are considerations. Its construction supports efficient insert indexing and predictable maintenance intervals, facilitating lean tool management and consistent part quality across shifts. For technical application advice or to procure the face-milling cutter head from Teknik Makina (SKU T212TM), contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss mounting, insert selection and delivery options Technical data Article number: T212TM Name: Planmesserkopf Type: Face-milling cutter head for ODHT 0605 indexable inserts Manufacturer: Teknik Makina Core data Diameter: 100 mm Shank diameter: 32 mm Overall length: 52 mm Weight: 1.765 kg Cutting angle: 43° Number of cutting edges: 7 Torx screw: M5x12 Torx key: T20 Special features Compatible with Walter ODHT 0605 inserts Designed for face-milling operations Robust design for reduced vibration FAQ Which inserts fit this cutter head? The cutter head is designed for ODHT 0605 indexable inserts and is compatible with Walter-manufactured ODHT 0605 insert types. What is the required clamping hardware for insert retention? Insert retention is achieved with an M5x12 Torx screw tightened using a T20 key, as specified for the cutter head (T212TM). What are the main advantages of the 43° cutting angle? A 43° cutting angle reduces radial force peaks and spreads the cutting load across inserts, which improves surface finish and contributes to longer insert life in the Planmesserkopf. Is the shank compatible with standard tool holders? The 32 mm shank provides a standard interface for many tool holders, offering rigid mounting and improved concentricity for stable milling operations. How many cutting edges are available per revolution and what does that mean for productivity? With 7 cutting edges, the cutter head engages multiple edges per revolution, increasing material removal per pass and enabling higher feeds for improved productivity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head For BLMP 0904 Indexable Inserts L60mm, 9 Cutting Edges - Teknik Makina
Take advantage of a robust combination of 100 mm diameter and a 60 mm overall length to secure stable, repeatable face milling performance with BLMP 0904 inserts; the compact design and well‑distributed nine cutting edges reduce vibration and support consistent surface finish. Order the face milling head directly via Metav Werkzeuge or consult our technical team for application matching. Face milling head — 100 mm diameter, for BLMP 0904 indexable inserts (Teknik Makina) The face milling head for BLMP 0904 indexable inserts is a compact, high‑stability cutter head designed for precision face milling in production and toolroom environments. 100 mm diameter for stable face milling Compatible with BLMP 0904 indexable inserts Compact 60 mm overall length for tight set‑ups High material removal with controlled finish The 100 mm diameter and nine cutting edges provide a broad contact area that distributes cutting forces and reduces chatter during face milling. This geometry enables efficient material removal while maintaining a consistent surface quality, especially useful for finishing passes where dimensional repeatability matters. The specified 100° cutting angle supports a favourable chip flow and lowers cutting forces, which helps extending insert life and reduces spindle load. Fast insert changes and serviceable fastening Tool changes are simplified by the standard Torx T10 interface and the supplied M3,5x8,5 Torx screws, enabling quick and secure clamping of indexable inserts. This configuration shortens maintenance intervals and minimises machine downtime during insert replacement. The cutter’s compact 60 mm overall length supports tight fixturing and reduces the likelihood of overhang‑induced vibration in confined setups. Production compatibility and balanced handling Designed for use with BLMP 0904 indexable inserts and compatible with Taegutec insert systems, the head integrates into common cutter families without extensive adaptations. The unit weight of 2.32 kg contributes to stable spindle inertia and helps maintain concentricity at moderate speeds, offering predictable cutting behaviour across series production runs. The robust construction provides a steady platform for repeatable results. Practical benefits for workshop and small‑batch production The compact face milling head combines a stable cutting circumference with straightforward fastening, making it suitable for both machine shop and light industrial applications where setup speed and surface consistency are priorities. The design supports rapid adaptation between jobs and reduces the need for frequent balancing adjustments, improving overall shop throughput and scheduling reliability. For straightforward integration into existing CNC workflows, contact Metav Werkzeuge for procurement advice and application support for the Teknik Makina face milling head (SKU T487-5TM) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T487-5TM Label: 100mm Planmesserkopf BLMP 0904 L60mm Manufacturer: Teknik Makina Eclass: 21181015 Facts Diameter: 100 mm Overall length: 60 mm Weight: 2.32 kg Cutting edges: 9 Cutting angle: 100° Special features Compatible with BLMP 0904 indexable inserts Matching insert manufacturer: Taegutec Torx key: T10 Torx screws: M3,5x8,5 Product type: Planmesserkopf bezeichnung_2_en: for BLMP 0904 Indexable Inserts FAQ What inserts fit this cutter head? The face milling head is designed for BLMP 0904 indexable inserts and is compatible with inserts from Taegutec. How many cutting edges does the head use? This milling head carries nine cutting edges, arranged to balance load and improve surface finish. Which tool secures the screws for insert clamping? A T10 Torx key is specified for the Torx screws (M3,5x8,5) used to clamp the inserts. Is the head suitable for compact set‑ups? Yes — the compact 60 mm overall length makes the cutter head appropriate for tight fixturing and reduced overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head for HNGX 0906 Indexable Inserts With Internal Coolant, 45° Cutting Angle - Teknik Makina
Take advantage of the combination of compact design, internal coolant, and compatibility with HNGX 0906 indexable inserts for reliable, high‑throughput face milling; order directly via Metav Werkzeuge or consult the technical team for integration advice 100 mm Face Milling Head — for HNGX 0906 Indexable Inserts, Internal Coolant (Teknik Makina) The face milling head for HNGX 0906 indexable inserts delivers stable, high‑precision facing and shoulder milling with internal coolant for improved tool life and process consistency 100 mm diameter for stable face milling Internal coolant for enhanced tool life 8 cutting edges for efficient material removal Compatible with HNGX 0906 inserts (Pramet) Consistent metal removal and productive cycle times The compact 100 mm cutter body is designed to maintain stability at the tool centre while delivering high material removal rates; with 8 cutting edges and a 45° cutting geometry the assembly balances shear and chip evacuation for smooth face milling operations. This configuration reduces vibration and extends insert life, which directly supports higher machine utilisation and measurable cycle‑time improvements. Compatibility with HNGX 0906 indexable inserts ensures availability of proven grades and chipforms for both finishing and light roughing. Controlled cooling for longer tool life and process reliability An integrated coolant channel supplies cutting fluid close to the cutting edge for optimised temperature control and improved chip wash‑out. The presence of internal coolant minimises built‑up edge and thermal wear, resulting in more consistent surface finishes and less frequent insert changes. For demanding workpiece batches where thermal stability is critical, the coolant feed contributes to repeatable results and reduces the risk of premature tool failure. Fast, safe servicing and low downtime Designed for straightforward maintenance, the head uses accessible fastenings and standard tooling for secure insert retention. The assembly accepts Torx fastenings and replacement screws for efficient servicing: Torx T15 for the securing tool and M4.5x11 screws for the insert seats. These standard interfaces cut tool change time and simplify inventory management, supporting a predictable maintenance routine on the shop floor. Broad applicability across machining tasks The cutter head performs reliably across a range of operations where face quality and dimensional control matter; the 45° rake provides a compromise between cutting force and finish, suitable for various steels and general workshop materials. The head is matched to inserts from Pramet, enabling selection of grades tailored to the application—this flexibility supports both prototype work and serial production without major tool redesign. Ready for integration into production environments With a compact overall length of 50 mm and a body mass of 1.542 kg, the design facilitates balance correction and straightforward mounting on common toolholders. The SKU T420-1TM identifies the exact configuration for procurement and spare‑parts planning. The robust construction and standardised interfaces simplify replacement scheduling and spare‑part stocking, helping to maintain continuous production flow and reduce the total cost of ownership. Contact Metav Werkzeuge for technical consultation and to secure the Teknik Makina face milling head T420-1TM with internal coolant for seamless integration into the production line; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: T420-1TM Label: 100mm Planmesserkopf HNGX 0906 L50mm mit Innenkühlung Product type: Face milling head Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 50 mm Weight: 1.542 kg Number of cutting edges: 8 Cutting angle: 45° Special features Internal coolant Compatible with HNGX 0906 indexable inserts Insert supplier match: Pramet Torx key: T15 Torx screw: M4.5x11 FAQ Which inserts fit this head? The face milling head is designed for HNGX 0906 indexable inserts and is specifically matched to inserts from Pramet for reliable seating and chip control. Is the cutter suitable for use with coolant through the spindle? Yes, the tool features internal coolant, allowing direct coolant delivery to the cutting zone when used with a compatible spindle feed. What fastening tools and screws are required for insert changes? Insert retention uses M4.5x11 screws tightened with a Torx T15 driver for quick and secure changes. Can the head be balanced for high‑speed applications? The compact 100 mm body and modest mass (1.542 kg) permit balance corrections on standard balancing equipment to suit higher spindle speeds and reduce vibration. How is the product identified for ordering and spare parts? Order and reference the SKU T420-1TM to obtain the exact Teknik Makina configuration and ensure matching spare screws and keys Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head for ONMX 0606 Indexable Inserts 45° Cutting Angle, 7 Cuts, 52mm Overall Length - Teknik Makina
Take advantage of the combination of a 100 mm diameter, a 45° cutting angle and secure 32 mm shank to improve machining consistency and reduce downtime; order the cutter head directly via Metav Werkzeuge or consult our specialists for integration advice. Face-milling head (T792TM) – 100 mm diameter, 45° cutting angle (Teknik Makina) The face-milling head (T792TM) is a compact machining head designed for face milling operations using ONMX 0606 indexable inserts and offers a balance of rigidity and accessibility for small to medium machining centres 100 mm diameter for broad face milling 45° cutting angle for smooth finishing Compatible with ONMX 0606 indexable inserts 32 mm shank for secure clamping Consistent surface quality with reduced cutting forces The cutter head is configured around a 45° cutting angle, which reduces radial cutting forces and helps produce a finer surface finish than steeper approaches. With a 100 mm diameter, the tool offers a larger contact arc for each pass, allowing for stable chip formation and reduced vibration. These geometric features combine to improve process stability; the result is fewer reworks and a more predictable finishing step in the production chain. The assembly weight of 1.701 kg and the compact 52 mm overall length support a well-balanced spindle load while keeping the tool envelope compact for tighter setups. Fast insert changes and proven system compatibility Designed for use with ONMX 0606 indexable inserts and compatible with Korloy inserts, the head simplifies tooling logistics by adopting a common insert family. Insert replacement is secured with M5x12 Torx screws; the specified driver is T20, ensuring repeatable clamping torque and simple maintenance. Using standardised screw sizes and a known insert format minimises spare-part variety and shortens changeover times on the shop floor, which supports higher spindle availability and lower operational complexity. Secure mounting and reliable clamping for shop-floor use The tool mounts on a 32 mm shank, providing a robust interface for a wide range of toolholders and quick-change systems. The shank diameter, paired with the head’s geometry, reduces deflection under load and maintains cutting stability during heavier engagements. The head carries seven cutting positions, arranged to distribute wear and permit indexing. This design choice extends usable tool life and keeps machining tolerances consistent across runs, contributing to a reliable manufacturing process without excessive operator intervention. Practical fit for workshop workflows and maintenance routines This face-milling head suits environments where modularity and serviceability are priorities: standardised inserts, a recognisable screw system and compact dimensions make it straightforward to store spares and train operators. The tool’s design supports scheduled maintenance and fast in-field servicing; replaced inserts restore cutting performance quickly, reducing unplanned downtime. For teams standardising tooling across cells, the compatibility with the ONMX 0606 family simplifies procurement and inventory management while retaining the option to choose inserts from Korloy or other suppliers that match the specification. Contact Metav Werkzeuge today to integrate the Teknik Makina T792TM face-milling head into existing tooling systems and secure tailored advice from our specialists. Technical data Article number: T792TM Manufacturer: Teknik Makina ECLASS: 21180902 Facts Diameter: 100 mm Cutting angle: 45° Shank diameter (D): 32 mm Weight: 1.701 kg Overall length: 52 mm Cutting positions: 7 Special features Compatible inserts: ONMX 0606 Recommended insert manufacturer: Korloy Torx screw: M5x12 Torx key: T20 Suitable for ONMX 0606 indexable inserts FAQ Which indexable inserts fit this head? The head accepts ONMX 0606 indexable inserts; compatibility with Korloy inserts is specified for the Teknik Makina face-milling head (T792TM). What is the shank size required for mounting? Mounting requires a 32 mm shank interface; the Ø32 connection ensures stable clamping for the T792TM assembly. What are the key dimensions to consider for machine setup? Important dimensions are 100 mm diameter, 52 mm overall length and 32 mm shank diameter for the T792TM, which together determine clearance and balance requirements. How many cutting positions are available and what is the benefit? The head provides 7 cutting positions, enabling indexing to renew the cutting edge quickly and prolong the time between full tool changes. Which fastening hardware and tool are needed for insert changes? Insert clamping uses M5x12 Torx screws tightened with a T20 Torx key for repeatable clamping torque on the T792TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head For ONMX 0806 Indexable Inserts L50mm With Internal Coolant - Teknik Makina
Take advantage of a compact milling solution that combines 100 mm diameter performance, internal coolant and compatibility with ONMX 0806 indexable inserts for reliable face milling results; order the item directly via Metav Werkzeuge or consult our specialists for tailored advice. Face mill head for ONMX 0806 indexable inserts — 100 mm, internal coolant (Teknik Makina) A face mill head designed for efficient metal removal with ONMX 0806 indexable inserts, featuring a 100 mm diameter and internal coolant for cleaner cutting and longer tool life. 100 mm diameter for efficient face milling Compatible with ONMX 0806 indexable inserts Internal coolant for improved chip evacuation Robust 50 mm total length, 7 cutting edges Faster, more consistent material removal for production work The 100 mm diameter head delivers a larger cutting circle, enabling higher material removal rates while maintaining a consistent surface finish. Fitted to accept ONMX 0806 indexable inserts, this milling solution reduces milling passes and machine time; the combination of the cutter geometry and the 7 cutting edges allows for smoother engagement and distributes cutting forces more evenly. For production environments seeking predictable cycle times, the design translates into measurable throughput improvements and fewer tool changes. Cooler cutting zone and extended tool life through internal coolant Integrated internal coolant channels ensure coolant reaches the cutting zone directly, supporting effective chip evacuation and temperature control at the insert interface. By flushing chips away and reducing thermal load on the cutting edges, the cooling system helps to extend insert life and maintain dimensional accuracy over longer runs. The result is reduced downtime for insert changes and more consistent part quality across batch production. Straightforward assembly and secure clamping for workshop efficiency The head is secured with M5x12 Torx screws tightened with a T20 Torx key, enabling quick, repeatable insert clamping and minimal setup time. A compact 50 mm total length keeps the assembly rigid and well suited to confined toolholders, while the robust construction and clear fastening standard simplify maintenance. For workshops aiming to reduce set-up complexity, these mechanical details translate into faster tool changes and reliable repeatability. Built for compatibility and practical use in metalworking Engineered specifically for ONMX 0806 inserts, this milling head integrates with common indexable tooling systems and supports typical face milling tasks across steels and general ferrous materials. The head’s geometry and coolant routing were chosen to balance chip control and cutting stability, making it appropriate for both single-part finishing and batch machining. Limited inventory complexity and standardised fastening mean easier stocking and fewer special tools required. For availability, delivery options and tailored technical advice on the Teknik Makina face mill head (SKU T784-1TM), please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a precise recommendation and lead-time information. Technical Data Article number: T784-1TM Product type: Face mill head Brand: Teknik Makina Label: 100mm Planmesserkopf ONMX 0806 L50mm mit Innenkühlung ECLASS: 21181015 Facts Diameter: 100 mm Total length: 50 mm Weight: 1.067 kg Cutting edges: 7 Cutting angle: 45° Torx key: T20 Torx screw: M5x12 Internal coolant: Yes Special features Compatible with ONMX 0806 indexable inserts Internal coolant channels Robust clamping with Torx screws Compact design for rigid mounting FAQ Which inserts fit this milling head? The head is compatible with ONMX 0806 indexable inserts; the geometry and insert size are matched to ensure stable cutting and correct seating. Is the coolant internal or external? The tool features internal coolant, which delivers coolant directly to the cutting edge for improved chip evacuation and temperature control. What is the total length and how does it affect rigidity? The total length is 50 mm; this compact length increases rigidity, reducing deflection and improving dimensional repeatability during face milling. How many cutting edges are available on the cutter? The assembly provides 7 cutting edges, allowing balanced cutting action and distributed wear for stable machining performance. Which screw and key are required for insert clamping? Insert clamping uses M5x12 Torx screws tightened with a T20 Torx key, enabling secure, repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head for SEET 12T3 Indexable Inserts L50mm, 45° Cutting Angle, Internal Coolant - Teknik Makina
Take advantage of a robust combination of 100 mm diameter, internal coolant and seven cutting edges for efficient, repeatable surfacing operations; order the face milling head directly via Metav Werkzeuge or consult our technical team for specification support. Face milling head — 100 mm diameter, internal coolant (Teknik Makina) Face milling head designed for precision surfacing with SEET 12T3 indexable inserts, suitable for production machining and workshop refurbishment. 100 mm diameter for broad surface cuts Compatible with SEET 12T3 indexable inserts Internal coolant for improved chip evacuation Seven cutting edges for consistent material removal Precision surfacing for consistent results The 100 mm tool body delivers broad, stable engagement, reducing the number of passes required to reach nominal dimensions and smoothing cycle times. The tool features a 45° cutting geometry that balances cutting force and surface finish, while the reduced overall length (50 mm) improves rigidity at the toolholder interface. As a result, the face milling head gives higher process stability and predictable results across repeated runs, supporting efficient production planning and fewer reworks. Controlled coolant flow and secure insert clamping An integrated internal coolant channel directs lubricant to the cutting zone to support chip evacuation and thermal control, which helps maintain insert life and surface quality. Inserts are fastened with M3,5x11 Torx screws requiring a T15 key, enabling quick service intervals and secure clamping under high loads. The combination of internal coolant and positive clamping reduces the risk of built-up edge and supports longer continuous operation in batch or single-piece production. Operational benefits and workshop integration Designed by Teknik Makina, the tool body (SKU T566-1TM) is a compact and serviceable solution for facing and finishing tasks where repeatability matters. The seven cutting edges promote even wear distribution and sustained metal removal rates without frequent index changes. The moderate mass (approx. 1.812 kg) offers a balance between damping and responsiveness during plunge and peripheral operations. For buyers seeking a reliable component from a trusted supplier, this milling head integrates readily into standard toolholders and modular tooling systems. For tailored advice on integrating the Teknik Makina face milling head T566-1TM into existing setups or for supply from Metav Werkzeuge’s Emmerich stock, contact our consultants at Metav Werkzeuge for prompt, expert support. Technical data Article number: T566-1TM Brand: Teknik Makina Product type: Face milling head Numeric data Diameter: 100 mm Overall length: 50 mm Weight: 1.812 kg Cutting edges: 7 Cutting angle: 45° Design & features Compatible inserts: SEET 12T3 Internal coolant: yes Torx screw: M3,5x11 Torx key: T15 FAQ What indexable inserts does this milling head accept? The face milling head accepts SEET 12T3 indexable inserts, providing a standardised insert form for flexible tooling and easy replacement. Does the tool support through-coolant delivery? Yes, the Teknik Makina face milling head features internal coolant to direct coolant to the cutting edge for improved chip control and thermal management. What fastening hardware is required for insert replacement? Inserts are secured with M3,5x11 Torx screws and require a T15 Torx key for installation and removal. Is the milling head suitable for heavy-duty facing operations? The combination of 100 mm diameter, seven cutting edges and a 45° cutting geometry makes the tool well suited to stable facing and finishing tasks where rigidity and consistent metal removal are priorities. How heavy is the tool and what is the SKU for ordering? The tool weighs approximately 1.812 kg and is listed under SKU T566-1TM for ordering and inventory reference. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head for SEET 12T3 Indexable Inserts L55mm, 7 Cutting Edges, Internal Coolant - Teknik Makina
Take advantage of the combination of high material-removal capability, internal coolant for stable cutting, and precise mounting for consistent surface quality — order directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head for SEET 12T3 indexable inserts — 100 mm, internal coolant (Teknik Makina) A face milling head designed for industrial face machining with SEET 12T3 indexable inserts, optimised for high-feed finishing and reliable coolant delivery. 100 mm diameter for wide-area material removal Internal coolant supply for improved chip evacuation Seven cutting edges for stable cutting performance 45° rake angle for smooth surface finish Higher throughput with reproducible cutting results The face milling head delivers measurable productivity gains by combining a 100 mm diameter cutting circle with seven cutting edges, enabling more contact points per revolution and longer effective tool life between indexings. The 45° cutting geometry reduces axial load, which supports higher feed rates while maintaining a consistent surface finish. Where cycle time and repeatability matter, this configuration converts spindle power into uniform material removal without frequent re-adjustments. Improved process stability through coolant and secure fixing Built-in internal coolant channels support efficient chip evacuation directly at the cutting zone, reducing heat build-up and minimising the risk of built-up edge. This cooling strategy helps preserve insert life and maintain dimensional stability in continuous operations. The head accepts SEET 12T3 indexable inserts and is secured with M3.5x8.5 Torx screws (T15) for positive clamping and easy reassembly, supporting predictable tool-change routines in production environments. Designed for integration and straightforward maintenance With an overall length of 55 mm and a mounting/connection diameter of 32 mm, the milling head fits compact toolholders while preserving stiffness for heavy cuts. The component’s balanced design and its measured weight of 1.715 kg contribute to vibration damping and consistent surface quality. Maintenance is straightforward thanks to standardised fasteners and insert format, allowing quick re-indexing and minimised downtime in busy workshop or shop-floor settings. Contact Metav Werkzeuge today for tailored application advice and to request the Teknik Makina face milling head T437-1TM with internal coolant — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical details SKU: T437-1TM Label: 100mm Planmesserkopf SEET 12T3 L55mm eClass: 21181015 Measurements & core data Diameter: 100 mm Overall length: 55 mm Mounting diameter: 32 mm Weight: 1.715 kg Cutting edges: 7 Cutting angle: 45° Aufnahme_mm_d: 32 Features & compatibility Internal coolant: yes Compatible inserts: SEET 12T3 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 Product type: Face milling head Manufacturer: Teknik Makina FAQ Which insert type fits this milling head? The face milling head is designed for SEET 12T3 indexable inserts, offering a standardised insert format for easy sourcing and replacement. Does the tool provide coolant to the cutting zone? Yes — the T437-1TM model includes internal coolant channels to support chip evacuation and reduce thermal loading at the cutting edge. What fasteners are used for the inserts? Inserts are secured with M3.5x8.5 Torx screws tightened with a T15 Torx key, allowing reliable clamping and simple servicing. What are the main dimensional data for mounting? Key mounting dimensions: 100 mm diameter, 55 mm overall length and 32 mm mounting diameter for compatibility with appropriately sized toolholders. How many cutting edges are active during operation? The head carries seven cutting edges, increasing the number of engagement points and distributing cutting forces for improved stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Face Milling Head for SNEU 1206 Indexable Inserts 45° Cutting Angle, 8 Inserts, M5x12 Torx - Teknik Makina
Combine precise 45° cutting geometry, a robust Ø100 mm body and fast insert changing for uninterrupted machining. Order the planing cutter head directly via Metav Werkzeuge or ask our consultants if needed. Planing cutter head (T167TM) – face milling head with 8 cutting edges, Teknik Makina A planing cutter head engineered for efficient facing and finishing tasks on CNC milling machines, designed for use with standard indexable inserts and conventional toolholders. Ø100 mm diameter for robust material removal Eight cutting edges for consistent surface finish 32 mm arbor connection for standard toolholders Quick insert replacement with M5x12 Torx fixing Higher material removal rates with predictable results The compact Ø100 mm body and 8 cutting edges provide a stable cutting platform that reduces vibration and delivers a more uniform surface finish. The defined 45° cutting angle lowers cutting forces while maintaining chip control, which helps to extend tool life and stabilise cycle times. For production environments the geometry translates into consistently repeatable passes, improved first-time-right rates and fewer reworks—clear efficiency gains for batch and single-part manufacturing alike. Fast set-up and secure clamping reduce downtime A 32 mm arbor interface ensures compatibility with common toolholders, while the indexable inserts are clamped with an M5x12 Torx screw and require a T20 key for replacement. This combination allows straightforward replacement of cutting edges in the workshop without ad hoc tooling, cutting changeover time and machine idle periods. The secure Torx fixing keeps insert seating stable under load, reducing the need for repeat torque checks and supporting predictable maintenance intervals. Robust design for industrial workloads and simple maintenance Weighing 1.925 kg, the milling head is built for heavy‑duty use without compromising balance. The solid construction supports consistent cutting performance across facing and light finishing operations, while the accessible screw and arbor dimensions simplify inspection and replacement. The head is intended for users seeking durable tooling that integrates into existing machining setups; Metav’s advisers can provide guidance on matching holders and insert grades for specific material requirements. Contact Metav Werkzeuge for tailored advice on Teknik Makina tools, ordering guidance and availability — info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: T167TM Manufacturer: Teknik Makina eClass: 21181015 Measurements Diameter: 100 mm Overall length: 50 mm Arbor diameter: 32 mm Weight: 1.925 kg Number of cutting edges: 8 Cutting angle: 45° Features Torx screw: M5x12 Torx key: T20 SKU: T167TM FAQ What toolholders fit this cutter head? The Teknik Makina planing cutter head (SKU T167TM) is designed for a 32 mm arbor interface and fits holders that accept a 32 mm shank and suitable clamping for face milling operations. Which inserts are compatible with the head? The milling head accepts standard indexable inserts of the matching style; for exact insert geometry and grade recommendations, Metav Werkzeuge can advise on the best option for the intended material and cutting parameters. How is the insert secured and replaced? Inserts are clamped with an M5x12 Torx screw; replacement requires a T20 key. The fixing system is designed for quick changeovers and stable seating under machining loads. Is the head suitable for heavy‑duty facing operations? With its robust 1.925 kg construction and eight cutting edges, the head is intended for intensive facing and light finishing tasks, offering a balance between material removal and surface quality. Can Metav provide help with balancing and setup recommendations? Yes, Metav Werkzeuge offers practical advice on balancing, holder selection and cutting data to integrate the Teknik Makina head into production workflows. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Face Milling Head for SNMU 1305 Indexable Inserts With Internal Coolant, 45° Cut Angle - Teknik Makina
Take advantage of a compact, high-capacity face milling solution that combines stable cutting performance, internal coolant routing and straightforward maintenance—optimising throughput and uptime. Order directly via Metav Werkzeuge or consult our specialists for application matching. Face milling head by Teknik Makina — 100 mm diameter, internal coolant Face milling head designed for SNMU 1305 indexable inserts to deliver efficient face milling and finishing in production environments 100 mm diameter for broad face milling Internal coolant for better heat control 8 cutting edges for continuous material engagement Compatible with ISCAR SNMU 1305 inserts Optimised throughput with predictable cutting forces This face milling head combines a 100 mm diameter with a 45° cutting angle and 8 cutting edges to provide consistent material engagement across the cutting path. The geometry reduces instantaneous chip load per insert, which translates into smoother power demand from the machine spindle and fewer vibrations during heavy passes. For production planning this means higher feed rates can be maintained with predictable tool life, reducing unplanned stops and improving overall equipment effectiveness. Coolant-fed design that protects edges and reduces rework Internal coolant routing is integrated to target the cutting zone directly. The presence of internal coolant assists in lowering cutting temperatures and flushing chips away from the pockets, which helps to maintain edge integrity and surface finish between index changes. In practical terms, targeted coolant reduces thermal wear on the inserts and the holder, extending service intervals and decreasing the risk of thermal-related rejects—important for repeatable batch quality. Secure clamping and fast serviceability on the shop floor Assembly and insert changes are simplified: the head uses Torx T20 drive and M5x12 fasteners for repeatable clamping torque. Quick, tool-assisted indexable insert changes reduce downtime and keep maintenance tasks straightforward for line technicians. The cutter’s compact footprint—52 mm overall length and a mass of 1.487 kg—supports rigid mounting while minimising overhang, which helps preserve spindle bearings and improves dimensional stability during long runs. Application fit and handling advantages Designed for SNMU 1305 indexable inserts from ISCAR, the head supports common production tasks such as face milling and step finishing where stable cutting and coolant access are priorities. The stated maximum cutting diameter of 113 mm provides flexibility for slightly larger cut widths when required. The construction and compatibility focus on shops that value rapid insert replacement, consistent surface finish and reduced overall machining cycle times. For precise specification checks or to arrange a purchase of the Teknik Makina face milling head (SKU T237-1TM), contact Metav Werkzeuge for personalised advice and fast supply from Emmerich: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T237-1TM Product: Face milling head (Planmesserkopf) Application: for SNMU 1305 indexable inserts Manufacturer: Teknik Makina Label: 100mm Planmesserkopf SNMU 1305 L52mm mit Innenkühlung UID: T237-1TM Dimensions & core data Diameter: 100 mm Maximum cutting diameter: 113 mm Overall length: 52 mm Weight: 1.487 kg Cutting edges: 8 Cutting angle: 45° Design & special features Internal coolant: yes Compatible inserts manufacturer: ISCAR Insert size: SNMU 1305 Torx key: T20 Fasteners: M5x12 FAQ What inserts does this face milling head accept? The head is designed for SNMU 1305 indexable inserts and is compatible with inserts from ISCAR, ensuring straightforward sourcing and interchangeability. Is the cutter head suited to coolant-intensive operations? Yes. The face milling head features internal coolant, which supplies coolant directly to the cutting zone to aid chip evacuation and extend insert life. How many cutting edges does the head support and what is the impact? The tool carries 8 cutting edges, enabling continuous engagement for higher material removal rates and smoother cutting forces compared with fewer-edge solutions. Which drive and fastener types are required for assembly? Assembly and insert clamping use a Torx T20 drive and M5x12 screws, designed for repeatable torque and fast serviceability on the shop floor. What are the key dimensions affecting tool setup? Relevant setup values include a 100 mm diameter, 113 mm maximum cutting diameter, 52 mm overall length, and a weight of 1.487 kg; these influence overhang and spindle load calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com