Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
125mm Indexable Tool Holder 90° For TPKN 1603-2204 Indexable Inserts, 6 Cutting Edges - Teknik Makina
Take advantage of the combination of precise 90° geometry, a 40 mm shank for secure mounting and easy insert compatibility to maintain efficient production. Benefit from stable clamping with the M8x24 locking screw and proven construction — order or consult Metav Werkzeuge for tailored advice. Angle Tool Head T108TM — Indexable-insert head for TPKN 1603–2204, 90° cutting angle (Teknik Makina) The Angle Tool Head T108TM is a compact, right-angle holder designed for use with TPKN 1603–2204 indexable inserts and suited to CNC turning and right-angle machining tasks Compatible with TPKN 1603–2204 inserts 90° cutting angle for right-angle operations 40 mm shank diameter for secure mounting M8 locking screw & M4 hex screw included Increase process reliability with proven geometry and secure clamping The holder's 90° cutting angle delivers consistent tool engagement for right-angle operations, reducing orientation errors and facilitating predictable chip flow. Built around a 40 mm mounting diameter, the body ensures rigid support on the toolpost or turret, which translates into stable cutting conditions and fewer rework cycles. The combination of precise geometry and a secure M8x24 locking screw minimises tool movement under load, so cycle times remain steady and tool life is extended. Fast indexable-insert changes and straightforward mounting Tool changes are simplified by the head's compatibility with TPKN 1603–2204 inserts and a clear clamping concept using the M4x10 hex screw and dedicated U-plate TA012. The nominal 125 mm diameter and a total length of 62 mm are balanced to provide accessibility in tighter setups while retaining adequate leverage and stiffness. For workshops that require quick downtime recovery, the holder reduces changeover complexity and supports repeatable seating of inserts, improving overall line throughput. Robust design that supports repeatable accuracy in series production At a weight of 3.164 kg, the unit combines mass for vibration damping with a compact form factor to fit many turret configurations. Six cutting edges are accommodated by the specified insert size, enabling economic index changes without sacrificing edge quality. The head is assembled and secured using industry-standard fasteners, including the M8x24 locking screw and a 5 mm Allen key interface for adjustment, which together provide a dependable interface for everyday machining demands. Contact Metav Werkzeuge today for expert guidance on integrating the Angle Tool Head T108TM into production and to arrange supply direct from the European quality hub in Emmerich Technical data Article number: T108TM Name: Angle tool head for TPKN 1603–2204 indexable inserts Brand: Teknik Makina ECLASS: 21181015 Facts Shank diameter: 40 mm Cutting angle: 90° Diameter: 125 mm Number of cutting edges supported: 6 Total length: 62 mm Weight: 3.164 kg Special features Locking screw: M8x24 U-plate: TA012 Hex screw: M4x10 Allen key size: 5 mm Suitable for: TPKN 1603–2204 indexable inserts FAQ What inserts fit this tool head? The head is specified for TPKN 1603–2204 indexable inserts and accepts the standard insert form for those sizes in the indicated clamping arrangement. Is the clamping hardware included or standardised? Clamping uses an M8x24 locking screw for the head and an M4x10 hex screw for insert fixation; the design corresponds to common turret interfaces and the U-plate TA012 seating. Can this head be mounted on any turret with a 40 mm bore? The tool head uses a 40 mm mounting diameter and is intended for turrets or toolposts compatible with that shank size; mechanical compatibility should be verified against the machine interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Indexable Turning Tool Holder 90° For LNGX 1307 Indexable Inserts M4x10 Torx T15, 40mm Shank - Teknik Makina
Take advantage of a compact, robust turning solution that combines a 90° cutting angle with a Ø125 mm body for stable facing and external turning; compatible with LNGX 1307 indexable inserts and available through Metav Werkzeuge — order directly or consult the specialists for integration advice. Corner turning head for LNGX 1307 indexable inserts — 90° cutting angle, Ø125 mm | Teknik Makina Corner turning head designed for secure mounting of LNGX 1307 indexable inserts, suitable for precise facing and external turning operations in CNC lathes and turning centres. 90° cutting angle for square shoulders Compatible with LNGX 1307 inserts by Walter Ø125 mm body with 40 mm shank diameter Torx screw M4x10 and T15 key specification Consistent chip control and dimensional accuracy for production work The compact design of this turning head delivers stable machining thanks to a full-bodied Ø125 mm holder and a defined 90° cutting angle, which produces square shoulders and consistent flank geometry. For production environments where repeatability is essential, the combination of a substantial tool body and eight cutting positions reduces vibration and improves surface finish. The result is fewer reworks and predictable cycle times, supporting higher throughput on series turning tasks. Fast tool changes and secure clamping to reduce downtime With a 40 mm shank diameter, the holder provides a rigid interface with standard tool turrets; the clamping is defined by a Torx screw specification M4x10 and a T15 key. This arrangement enables reliable seat retention and straightforward tightening torque control, which shortens changeover routines and enhances operator safety. Compatibility with LNGX 1307 indexable inserts allows existing insert stocks to be used without adapter work, simplifying logistics and lowering tooling setup time. Robust construction tuned for workshop conditions Weighing 3.555 kg and measuring a total length of 63 mm, the tool head is engineered for mechanical stability in demanding turning tasks. The eight cutting edges specification supports multi-edge indexing strategies, extending the service interval before insert replacement. The solid build and precise geometry maintain cutting consistency under load, which benefits both fine finishing and heavier stock-removal cuts where dimensional control is required. For precise turning with LNGX 1307 inserts, rely on Teknik Makina quality supplied via Metav Werkzeuge — for product availability and integration guidance contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T495TM Manufacturer: Teknik Makina Product name: Corner turning head Application: for LNGX 1307 indexable inserts Dimensions & weight Diameter: 125 mm Shank diameter: 40 mm Total length: 63 mm Weight: 3.555 kg Cutting angle: 90° Cutting edges: 8 Compatibility & fastening Compatible inserts: LNGX 1307 (manufacturer: Walter) Torx screw: M4x10 Torx key: T15 FAQ Is this turning head compatible with LNGX 1307 inserts? Yes. The corner turning head T495TM is designed for use with LNGX 1307 indexable inserts and matches the clamping geometry used by Walter-manufactured inserts. What shank diameter is required for mounting this head? The tool requires a 40 mm shank interface; the holder’s design ensures rigid seating and stable axial support when mounted in suitably sized turrets. Which fastening hardware is specified for secure clamping? Clamping is specified with a Torx screw M4x10 and a T15 key size, enabling controlled torque and secure insert retention for the Teknik Makina turning head. How many cutting edges or index positions are provided? The head configuration lists 8 cutting edges or index positions, allowing multiple indexing operations before insert replacement is necessary. What benefits does the 90° cutting angle offer in practice? A 90° cutting angle generates precise square shoulders and predictable flank geometry, which improves part interchangeability and reduces secondary finishing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Planing Cutter Head for 100° ENMX 0905 Indexable Inserts, 12 Cutting Edges, 40mm Mount - Teknik Makina
Take advantage of the combination of robust compatibility, a wide 125 mm working diameter and a defined 100° cutting angle for reliable, high-throughput facing operations; order this facing head directly via Metav Werkzeuge or consult our specialists for integration advice. Facing head T705TM — Teknik Makina for 100° ENMX 0905 indexable inserts, 125 mm diameter The Facing head T705TM is a precision-engineered facing tool intended for industrial turning and finishing where ENMX 0905 indexable inserts are specified 100° cutting angle for efficient facing Compatible with ENMX 0905 inserts (YG-1) 125 mm diameter for broad surface coverage 40 mm shank bore for secure mounting Consistent high-removal capacity with stable surface results The T705TM facing head combines a 125 mm diameter with a 100° cutting angle and twelve cutting edges to deliver steady material removal on large-diameter faces. The geometry favours a balance between chip control and surface finish: a wider diameter increases the contact area for uniform passes, while the defined cutting angle helps moderate cutting forces and reduce chatter. In practice, this means fewer passes and a more predictable cycle time for batch production, improving throughput without sacrificing the finished surface quality. Secure insert mounting and reduced setup variability Designed for the common ENMX 0905 indexable inserts and compatible with YG-1 grades, the unit employs a Torx retention system (Torx T10 with M3.5x8.5 screws) to ensure consistent clamping force and repeatability. The 40 mm mounting bore delivers rigid connection to standard toolholders, lowering vibration and improving dimensional stability. For users unfamiliar with insert nomenclature: ENMX 0905 denotes the insert shape and size, while the supplier code (YG-1) identifies preferred grades; matching both ensures optimum wear behaviour and life. Workshop-ready design that integrates with existing setups With an overall height of 63 mm and a shank-ready diameter suitable for common toolposts, this facing solution is engineered for straightforward integration into production lines. The modular insert concept reduces downtime — worn edges are indexed or replaced rather than regrinding — and the head’s configuration supports routine maintenance with standard Torx tooling. The combination of replaceable cutting edges and a robust body yields predictable lifecycle costs and supports planned preventive maintenance schedules in industrial workshops. For a reliable upgrade to facing performance, contact Metav Werkzeuge for tailored advice on Teknik Makina tooling and to arrange supply of the T705TM through our Emmerich facility Technical data Article number: T705TM Manufacturer: Teknik Cutting Tools ECLASS: 21181015 Facts Diameter: 125 mm Overall height: 63 mm Shank bore / holder diameter: 40 mm Cutting angle: 100° Cutting edges: 12 Torx key: T10 Torx screw: M3.5x8.5 Special features Suitable for ENMX 0905 indexable inserts Compatible with YG-1 insert grades Facing head design for industrial turning and finishing Brand: Teknik Makina FAQ What insert type is required for this facing head? The facing head requires ENMX 0905 indexable inserts; YG-1 grades are listed as compatible for typical facing applications. How is the insert secured in the tool? Inserts are clamped using a Torx system (Torx T10) with M3.5x8.5 screws to provide repeatable and secure fastening. Which holder or shank diameter fits this head? The tool is designed for a 40 mm shank bore / holder diameter to ensure a rigid mount in standard toolholders. Can this head be used for roughing and finishing passes? Yes — the 100° cutting angle and twelve cutting edges support high-removal roughing followed by controlled finishing passes when the appropriate insert grade is selected. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Planing Cutter Head For HNGX 0906 Indexable Inserts 8 Teeth, 55° Cutting Angle, 40mm Mount - Teknik Makina
Benefit from stable, high‑quality face milling thanks to a robust cutter head with a 125 mm diameter and eight cutting edges that shorten cycle times and reduce indexing frequency. Order the face milling head via Metav Werkzeuge or consult the advisors for application-specific guidance. Face milling head T421TM – 125 mm diameter, 8 cutting edges (for HNGX 0906 indexable inserts) by Teknik Makina The Face milling head T421TM is a compact cutter head engineered for efficient surface machining with HNGX 0906 indexable inserts, intended for production and jobbing environments requiring predictable surface finish and rapid insert changes 125 mm diameter for broad surface coverage Eight cutting edges for stable material removal 55° cutting angle for consistent chip formation 40 mm shank for secure toolholding Higher output through consistent cutting geometry The large 125 mm diameter combined with eight cutting edges allows for increased table feed per revolution while maintaining a uniform cut pattern. The 55° cutting angle reduces impact on the tool and helps smooth chip flow, which frequently leads to a more consistent surface finish and fewer rework passes. This geometry is particularly effective where surface evenness and repeatability are required, enabling a measurable improvement in process stability without modifying downstream processes. Faster set-up and secure clamping reduce downtime A rigid 40 mm shank provides reliable toolholding in standard toolholders, while the fastening system uses M4.5x11 Torx screws tightened with a T15 key for straightforward maintenance and repeatable torque application. Compatibility with HNGX 0906 indexable inserts simplifies logistics by allowing use of commonly stocked insert types. Together these details shorten tool change and service intervals, improving overall equipment effectiveness in busy workshops. Designed for repeatability and easy handling With an overall length of 63 mm and a mass of 3.314 kg, the cutter head balances compactness with sufficient mass to dampen vibration during operations that demand steady engagement. The construction supports reproducible indexing of inserts and straightforward replacement procedures, which helps reduce variability between shifts and operators. The product is identified as T421TM, facilitating clear documentation within tooling lists and procurement systems. Straightforward integration with existing tooling systems The head accepts indexable inserts in the HNGX 0906 format and is listed as compatible with insert manufacturer Pramet, enabling integration into established tooling families and allowing workshops to continue using preferred insert grades. The combination of a standardised insert form and conventional screw sizes keeps the number of special tools and spare parts low, simplifying inventory and supply-chain planning while maintaining machining performance. For advice on integrating the Teknik Makina face milling head (T421TM) into production, contact Metav Werkzeuge in Emmerich for prompt, expert support. Technical data Article number: T421TM Product: Face milling head for HNGX 0906 indexable inserts Manufacturer: Teknik Makina Key dimensions Diameter: 125 mm Cutting edges: 8 Overall length: 63 mm Shank diameter (clamping): 40 mm Weight: 3.314 kg Cutting angle: 55° Special features Compatible with HNGX 0906 indexable inserts Compatible insert manufacturer: Pramet Torx screw: M4.5x11 Torx key size: T15 Suitable for standard toolholders with 40 mm clamping FAQ Which insert format is required for this milling head? The face milling head requires HNGX 0906 indexable inserts; this is the designated insert format for the T421TM cutter head. Is the head compatible with Pramet inserts? Yes, the cutter head has been specified to be compatible with inserts from Pramet in the HNGX 0906 format. What fastening hardware is used for the inserts? The inserts are secured using M4.5x11 Torx screws; a T15 Torx key is recommended for tightening and service. What shank size is required in the toolholder? The head has a 40 mm shank diameter for clamping in appropriately rated toolholders. How is the T421TM identified in ordering and documentation? The cutter head is listed under SKU T421TM, which should be used for procurement and internal tooling records. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Planing Cutter Head For ONMX 0806 Indexable Inserts 8 Teeth, 45° Cutting Angle, 40mm Shank - Teknik Makina
Benefit from a robust combination of a Ø125 mm head and eight cutting edges that deliver consistent material removal and improved surface finish; the secure 40 mm shank ensures stable toolholding under load. Order the face milling head directly via Metav Werkzeuge or consult the Metav specialists for integration advice. Face milling head T786TM — Face milling head by Teknik Makina (Ø125 mm, 8 cutting edges) The Face milling head T786TM is a heavy-duty cutter head designed for high-efficiency face milling with ONMX 0806 indexable inserts in industrial CNC applications. Ø125 mm head diameter Compatible with ONMX 0806 inserts Eight cutting edges for high removal rates 40 mm shank for secure toolholding Stable clamping and vibration reduction for consistent finishes The cutter head has a 40 mm shank and a substantial mass of 3.574 kg, which together increase inertia and reduce chatter during machining. This results in a more consistent surface finish and fewer toolmarks, especially when removing material across wide faces. Operators and planners will notice improved repeatability on long runs, as the stable mounting reduces the need for frequent readjustment and rework. Higher throughput through multiple cutting edges and geometry Equipped with eight cutting edges and a Ø125 mm head, the tool is optimised for efficient face milling where material removal rate matters. The 45° cutting angle balances entry forces and chip formation to allow smoother engagement with the workpiece, delivering steady metal removal while lowering peak loads on each insert. The result is higher productivity per tool change and predictable machining cycles for production planning. Flexible insert sourcing and straightforward maintenance The head is supplied for ONMX 0806 indexable inserts and is compatible with inserts from ISCAR, Korloy, LMN and YG-1, simplifying supply-chain choices and reducing procurement friction. Insert retention uses a M5x12 Torx screw and a T20 key, enabling rapid replacement and minimal downtime. This compatibility supports a pragmatic maintenance routine: quick insert swaps and standardised fastening tools keep machines running with minimal interruption. Built for workshop integration and reliable operation With a compact overall length of 63 mm and a design that supports balanced cutting across its Ø125 mm diameter, the milling head integrates easily into existing toolholders and machine setups that accept a 40 mm shank. The combination of balanced geometry and indexable inserts means less tool inventory complexity while maintaining high-quality face milling and reduced cycle time. For production environments seeking predictable performance, this design offers a pragmatic route to improved throughput. Contact Metav Werkzeuge today to specify the Teknik Makina face milling head T786TM for your production line; Metav’s specialists will advise on holder compatibility and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T786TM Manufacturer: Teknik Makina Description: Face milling head for ONMX 0806 Indexable Inserts Torx screw: M5x12 Torx key: T20 Facts Shank diameter: 40 mm Head diameter: 125 mm Overall length: 63 mm Weight: 3.574 kg Number of cutting edges: 8 Cutting angle: 45° Special features Compatible inserts: ONMX 0806 Compatible manufacturers: ISCAR, Korloy, LMN, YG-1 Fastening: Torx screw M5x12, Torx key T20 FAQ Which inserts are suitable for this milling head? The face milling head T786TM is designed for ONMX 0806 indexable inserts and accepts inserts from ISCAR, Korloy, LMN and YG-1, allowing flexible sourcing for the cutter head by Teknik Makina (SKU T786TM). What holder or shank size is required for installation? Installation requires a toolholder that accepts a 40 mm shank; the 40 mm shank ensures secure clamping and stable operation for the Teknik Makina face milling head T786TM. How many cutting edges and what head diameter does it have? The cutter features eight cutting edges and a 125 mm head diameter, a combination that provides high material removal capacity for face milling tasks with the T786TM. Which screw and key are needed to change the inserts? Insert retention uses an M5x12 Torx screw and requires a T20 Torx key for safe and easy replacement on the Teknik Makina head (T786TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Planing Cutter Head for SEET 12T3 R245 Indexable Inserts, 8 Cutting Edges, 45° Cut Angle, 40mm Shank - Teknik Makina
Benefit from high-capacity planing with a 125 mm diameter head, 8 cutting edges and a precise 45° cutting angle; the 40 mm shank secures stable mounting and consistent surface finish. Order the planing cutter head directly via Metav Werkzeuge or consult the team for application-specific advice. Planing cutter head T568TM — 125 mm, for SEET 12T3 R245 indexable inserts (Teknik Makina) Planing cutter head T568TM designed for heavy-duty face and planing operations using SEET R245 12T3 indexable inserts, suitable for a wide range of production environments Compatible with SEET R245 12T3 inserts 125 mm diameter for broad coverage Eight cutting edges for continuous machining 40 mm shank for secure tool-holding Consistent surface finish from a rigid, high-capacity design The robust construction of this cutter head delivers a reliable machining platform: the 125 mm diameter provides broad contact area for efficient planing, while the 40 mm shank reduces vibration and improves runout stability. With 8 cutting edges, tool life is spread across multiple cuts, lowering downtime for indexable insert changes. These mechanical choices result in predictable component surfaces and fewer rework cycles, which is advantageous for batch production and repeatable processes. Fast insert replacement and straightforward compatibility Compatibility with SEET R245 12T3 indexable inserts simplifies logistics and speeds tool changes. The tool accepts inserts from established manufacturers such as Sandvik, XTC and ZCC, supporting common supply chains in industrial workshops. Fixing hardware is standardised — M3.5x11 Torx screws and M5x7 hex screws are employed, with assembly and removal aided by a T15 Torx key and U plate TA052 — enabling efficient maintenance routines and consistent clamping forces for repeatable cutting results. Stable mounting and predictable handling for demanding operations Measured handling values support use in heavier setups: the cutter head weighs 3.39 kg and has a compact overall length of 63 mm, yielding a solid centre of mass and restrained overhang. The 45° cutting angle balances shearing action and chip control for planing and facing operations, reducing edge wear on inserts and improving surface integrity. The combination of these specifications promotes a lower risk of chatter and delivers higher-quality finishes on a range of commonly machined materials. Engineered for workshop flexibility and production reliability This cutter head suits machining environments where changeovers and uptime matter. The designed interface and standard fastenings align with existing tool-holding practices, so line integration is straightforward. Compatibility with multiple insert brands, together with the tool’s geometric choices, supports both one-off and serial production tasks. As a product from Teknik Makina, the unit prioritises durable construction and practical serviceability to maintain output consistency over long production runs. Discuss the cutter head application with Metav Werkzeuge or request a technical drawing to verify fitment and insertion strategy — Metav Werkzeuge provides product expertise and supply from Emmerich. Technical Data Article number: T568TM Product name: Planing cutter head for SEET 12T3 R245 Manufacturer: Teknik Makina Dimensions & Core Data Diameter: 125 mm Cutting edges: 8 Overall length: 63 mm Weight: 3.39 kg Shank diameter: 40 mm Cutting angle: 45° Special features Compatible inserts: SEET R245 12T3 Compatible manufacturers: Sandvik, XTC, ZCC Screws: M3.5x11 (Torx), M5x7 (Hex) Torx key size: T15 U plate: TA052 FAQ What inserts does this cutter head accept? The planing cutter head T568TM accepts SEET R245 12T3 indexable inserts and is compatible with inserts from Sandvik, XTC and ZCC. Which shank diameter is used for mounting? Mounting is via a 40 mm shank, designed to fit standard toolholders requiring a solid clamping interface for reduced runout. How many cutting edges are available per head? The head is configured with 8 cutting edges, allowing for extended service life between insert changes. What fixing hardware is required for insert fastening? Insert clamping uses M3.5x11 Torx screws and M5x7 hex screws; a T15 Torx key and U plate TA052 are used for assembly and maintenance. Is the cutter head suitable for heavy-duty planing operations? Yes — the combination of 125 mm diameter, 40 mm shank and 45° cutting angle provides stability and effective chip control suited to demanding planing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Planing Cutter Head for SNKX 1606 and ONHX 0606 Indexable Inserts, 45° Cutting Angle, 8 Inserts, M5x12 Torx T20 - Teknik Makina
Take advantage of a robust machining solution that combines precise compatibility with common indexable inserts, low downtime through fast insert changes, and a compact, rigid design for repeatable surface finishes — order directly via Metav Werkzeuge or consult our specialists for tailored tooling recommendations. Planing cutter head T632TM — 125 mm diameter, 8 cutting edges, Teknik Makina The Planing cutter head T632TM is a compact milling head designed for face and planing operations with SNKX 1606 and ONHX 0606 indexable inserts 125 mm diameter for broad coverage 8 cutting edges for high material removal Compatible with SNKX 1606 and ONHX 0606 inserts Secure clamping with M5x12 Torx screws Consistent surface quality through robust design The milling body is engineered to deliver a stable cut and reliable surface finish even under cyclical production demands. With a 125 mm outer diameter and 8 cutting edges, the geometry distributes cutting forces to reduce vibration and tool deflection — a direct benefit for shops seeking repeatable tolerances. The 45° cutting angle provides a balanced mix of axial and radial cutting action, which reduces load peaks and extends insert life. In practice, this means fewer interruptions for regrinds and a steadier output quality across batch runs. Flexible tooling via widespread insert compatibility Designed for indexable cartridges, the head accepts SNKX 1606 and ONHX 0606 inserts, allowing quick changes and access to a wide range of grades from established suppliers such as Palbit. The compatibility with these insert types permits optimisation for different materials and cutting conditions without replacing the cutter body. The tool features a 40 mm bore for secure mounting and uses M5x12 Torx screws tightened with a T20 key, enabling efficient replacement of inserts while maintaining accurate seat location and clamping force. Workshop efficiency and serviceability At 4.026 kg the cutter body offers a good balance between rigidity and manageable handling for setup and tool changeovers. The compact overall length of 63 mm reduces overhang in many toolholders, supporting reduced runout and improved concentricity. Maintenance is streamlined by standard screw sizes and widely available insert formats, which shortens downtime and keeps production moving. For operations that rotate tooling across different machines, the consistent interface helps to standardise tooling setups and spare-part inventories. For tailored advice on integrating the Teknik Makina T632TM into machining cells or to request technical drawings and availability, contact Metav Werkzeuge in Emmerich — specialists are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to support ordering and application decisions. Technical details Article number: T632TM Manufacturer: Teknik Makina SKU: T632TM Product type: Planing cutter head Facts Diameter: 125 mm Number of cutting edges: 8 Overall length: 63 mm Bore / mounting diameter: 40 mm Weight: 4.026 kg Cutting angle: 45° Torx screw: M5x12 Torx key: T20 Special features Compatible inserts: SNKX 1606, ONHX 0606 Suitable insert supplier: Palbit Compact design for reduced overhang Indexable inserts for fast replacement FAQ What inserts does this cutter accept? The planing cutter head T632TM accepts SNKX 1606 and ONHX 0606 indexable inserts; Palbit grades are listed as a suitable option for varied materials. Which mounting diameter does the tool require? The milling head has a 40 mm bore for mounting and is intended for toolholders that accommodate a 40 mm interface. How many cutting edges are fitted and what is the diameter? The cutter is configured with 8 cutting edges and a 125 mm diameter to deliver broad, efficient material removal. Are the fastening screws proprietary? Standard M5x12 Torx screws are used and require a T20 key, facilitating straightforward insert clamping and service. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Planing Cutter Head For SPKN 1203 Indexable Inserts, 75° Cutting Angle, 40mm Shank - Teknik Makina
Take advantage of the head's robust design and insert compatibility to secure steady surface finishes and short maintenance times; the assembly combines a 125 mm diameter, a 40 mm shank and a 75° cutting geometry for reliable milling cycles — order via Metav Werkzeuge or consult our technical team for integration advice. Face milling head (Planmesserkopf) T156TM – 125 mm diameter, for SPKN 1203 inserts (Teknik Makina) A compact face milling head Face milling head (Planmesserkopf) T156TM designed for use with SPKN 1203 indexable inserts, engineered to deliver consistent face milling on CNC milling spindles and modular toolholders *Compatible with SPKN 1203 indexable inserts *125 mm diameter for broad cutting width *40 mm shank for secure mounting *75° cutting angle for stable cuts *M8x24 clamping screws, 5 mm Allen key Stable cutting geometry for consistent surface quality The milling head’s 125 mm diameter and 75° cutting angle combine to provide a stable engagement with the workpiece, reducing chatter and improving finish on machined faces. The indexed-insert approach means the cutting edge geometry is repeatable: when inserts are rotated or replaced, the geometry is restored quickly, so consistent part quality can be maintained across production runs. The unit’s mass and construction contribute to reduced vibration, which directly benefits tool life and surface integrity. Fast maintenance and predictable uptime Designed for efficient servicing, the cutter uses standard clamping hardware — M8x24 clamping screws tightened with a 5 mm Allen key — so insert changes are straightforward and repeatable. Because SPKN 1203 inserts are widely available, stocking spares is simple and turnaround times are short. The result is a predictable maintenance rhythm and lower unplanned downtime, which supports higher machine availability and better throughput in job-shop and production environments. Mounting compatibility and application suitability With a 40 mm shank and a total length of 62 mm, the head integrates with common toolholders and spindle interfaces found in general machining and CNC departments. The tool’s mass (approximately 3.4 kg) and the configuration with ten cutting edges enable broad-face milling and efficient material removal on steels and similar materials where indexable inserts are preferred. Before ordering, confirm that the machine spindle or holder accepts a 40 mm shank and that the intended cutter diameter fits the fixture envelope for safe operation. Contact Metav Werkzeuge for availability and assistance integrating Teknik Makina’s T156TM face milling head into existing tooling setups — Metav’s technical advisors in Emmerich can provide compatibility checks and delivery information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T156TM Manufacturer: Teknik Makina Designation: Face milling head (Planmesserkopf) for SPKN 1203 indexable inserts Facts Diameter: 125 mm Shank / mounting diameter: 40 mm Overall length: 62 mm Weight: 3.4 kg Cutting angle: 75° Cutting edges: 10 Special features Suitable for SPKN 1203 indexable inserts Clamping screws: M8x24-L Required tool: 5 mm Allen key SKU: T156TM FAQ Which insert type fits this milling head? The T156TM face milling head is designed for SPKN 1203 indexable inserts, enabling quick replacement and consistent cutting geometry. What is the cutter diameter and how does it affect machining? The 125 mm diameter provides a broad cutting width for face milling, improving material removal per pass while maintaining surface quality. Which shank size is required for mounting? Mounting requires a 40 mm shank holder; the face milling head’s dimensions (62 mm overall length) should be checked against the toolholder envelope. How many cutting edges are available and what does that mean for productivity? The head uses 10 cutting edges, allowing multiple indexed positions per insert and extended production intervals between full insert replacements. What fastening hardware is used for insert changes? Insert clamping is performed with M8x24-L screws, tightened using a 5 mm Allen key, for quick and repeatable insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Round Insert Milling Cutter for RPMW 1606 Indexable Inserts, 8 Cutting Edges - Teknik Makina
Take advantage of a robust 125 mm cutting diameter and an 8‑edge design that delivers steady metal removal and consistent surface finish; compatibility with RPMW 1606 indexable inserts ensures fast reconditioning and predictable tool life. Order the cutter via Metav Werkzeuge or consult the technical team for precise selection and delivery. Indexable face mill T720TM – 125 mm diameter, 8‑edge cutter by Teknik Makina Indexable face mill T720TM is a heavy‑duty 125 mm cutter designed for face milling with RPMW 1606 indexable inserts, providing stable removal rates in general workshop and production applications 125 mm diameter for broad material removal 8 cutting edges for balanced surface finish 40 mm shank diameter for stable mounting Compatible with RPMW 1606 indexable inserts High‑efficiency material removal with consistent finishes The T720TM face mill combines a large 125 mm cutting diameter with a multi‑edge configuration to maintain cutting stability and reduce cycle times. The 8 cutting edges distribute cutting forces evenly, which minimises chatter and helps achieve a more uniform surface quality on the machined face. As a result, one benefit is improved productivity through higher material removal rates; a second is reduced rework due to the balanced cutting action. This design suits production environments where repeatable results and predictable tool behaviour are required. Secure insert retention for fast servicing Designed specifically for use with RPMW 1606 indexable inserts, the toolhead accepts widely available inserts from Korloy, enabling quick replacement and inventory flexibility. Insert clamping is assisted by a standard M5x12 screw and a T20 Torx key, which simplifies maintenance and shortens downtime during tool swaps. The tangible benefit is lower maintenance time per changeover; additionally, compatibility with established insert grades supports cost‑effective stocking strategies. Rigid mounting to reduce vibration and extend life A 40 mm shank diameter and a compact overall height of 63 mm provide a stable interface to the toolholder, improving concentricity and load transmission. Reduced vibration leads to longer insert life and fewer rebuilds, which directly supports sustained production runs. The mechanical stability also contributes to consistent dimensional control across batches, an important advantage for precision milling tasks where tolerance adherence is critical. Suitable roles and workflow integration This face mill integrates well into mixed production shops and machining centres that already use RPMW 1606 inserts and require a robust cutter for face milling or light profiling tasks. The combination of a broad cutting diameter, multiple cutting edges and common insert compatibility allows for streamlined tool management and easier process standardisation across machines. For buyers seeking interchangeability and an industrially proven clamping method, the tool represents a pragmatic choice. Contact Metav Werkzeuge today for tailored advice on integrating the T720TM face mill into production lines or to request stock information from Metav’s Emmerich facility via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: T720TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Core dimensions Diameter: 125 mm Overall height: 63 mm Cutting edges: 8 Shank diameter: 40 mm Features and compatibility For RPMW 1606 indexable inserts Torx key: T20 Screw: M5x12 Compatible inserts manufacturer: Korloy FAQ Which inserts fit this face mill? The T720TM accepts RPMW 1606 indexable inserts; Korloy‑brand RPMW 1606 grades are listed as compatible in the product data. What key sizes are required for insert changes? Insert fastening uses an M5x12 screw secured with a T20 Torx key for fast and standardised servicing. What is the shank diameter for mounting? The cutter has a 40 mm shank diameter, designed for stable clamping in appropriately rated toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Turning Tool Holder for TPKN 1603–2204 Indexable Inserts, 90° Cutting Angle, 6 Inserts, M8x24 Screw - Teknik Makina
Take advantage of a compact, robust corner cutter head that combines a 90° cutting angle with a 40 mm shank for stable clamping and consistent results; compatible with TPKN 1603–2204 indexable inserts for quick insert changes and minimal downtime. Order directly via Metav Werkzeuge for reliable supply and European delivery. Corner Cutting Head T132TM — 90° angle, Ø40 mm shank (Teknik Makina) The Corner Cutting Head T132TM is a dedicated cutting head for machining corners and shoulders using TPKN indexable inserts, designed for use in CNC tool chains and workshop toolholders 90° cutting angle for precise corner machining 40 mm toolholder diameter for stable clamping Compatible with TPKN 1603–2204 indexable inserts Supplied with M8x24 socket screw and 5 mm Allen key Precise corner machining with reliable geometry The head delivers a defined 90° cutting angle, engineered to produce square shoulders and tight corner transitions with high repeatability. With a 125 mm outside diameter and six cutting edges, the design distributes cutting forces evenly, reducing vibration and improving surface finish. This geometry supports consistent part dimensions across runs, which means fewer rework steps and a more predictable production flow. Faster set-up through standardised insert compatibility Compatibility with TPKN 1603–2204 indexable inserts simplifies inventory and shortens changeover times. The head is supplied with the required M8x24 socket screw and a 5 mm Allen key, enabling secure mounting without additional fasteners. For workshops seeking to reduce machine downtime, the standardised insert family and simple clamping procedure provide a direct efficiency gain during maintenance and tool replacement. Stable clamping and integration into existing toolholders A 40 mm tool shank ensures a sturdy connection to conventional toolholders and adaptors, improving stiffness during interrupted cuts or heavy engagement. The component weight of 3.153 kg gives momentum damping characteristics that can aid dimensional stability in medium-duty operations. Use the head where a compact footprint is required without compromising on mechanical rigidity or repeatable positioning. Practical application scope and process advantages Suitable for profiling, shoulder finishing and corner relief operations, the head works well in series production and workshop environments where repeatability is essential. The combination of standard insert compatibility and a robust mounting interface reduces logistics complexity and supports a lean tooling strategy. Where higher feed or deeper pockets are involved, the defined geometry helps to keep cutting forces predictable and tooling life more consistent. Discuss integration options with Metav Werkzeuge and reserve the Corner Cutting Head T132TM for improved machining stability and faster insert turnaround — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm availability and shipping details. Technical Data SKU: T132TM Manufacturer: Teknik Makina Diameter: 125 mm Overall length: 62 mm Weight: 3.153 kg Facts Shank diameter: 40 mm Cutting angle: 90° Cutting edges: 6 Weight: 3.153 kg Overall length: 62 mm Special features Compatible inserts: TPKN 1603–2204 Supplied screw: M8x24 Allen key: 5 mm Designed for corner and shoulder machining FAQ Which insert sizes fit this head? The Corner Cutting Head T132TM accepts TPKN 1603–2204 indexable inserts; the range covers the common sizes used for corner and shoulder machining. What shank diameter is required for the toolholder? The head is made for a 40 mm shank interface and is intended for holders or adaptors that accept Ø40 mm tooling. Which fasteners are supplied for insert clamping? The tool is supplied with an M8x24 socket screw and a 5 mm Allen key for secure insert fixing. For which operations is the head particularly suited? The head is optimised for profiling, shoulder finishing and precise corner machining where a 90° cutting geometry is required. Is the head suitable for series production on CNC machines? Yes. With standardised inserts and a stable Ø40 mm mounting, the head supports repeatable processes and efficient tool changes in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Corner Tool Head for WNMU 0806 Indexable Inserts L63mm, 12 Cutting Edges - Teknik Makina
Benefit from robust 90° cutting geometry and a large 160 mm diameter for stable corner machining combined with compatibility with WNMU 0806 indexable inserts from Kyocera; this ensures process reliability and straightforward serviceability. Order the 160 mm corner head (SKU T548TM) directly via Metav Werkzeuge or ask our consultants if needed. 160 mm Corner Head T548TM – for WNMU 0806 indexable inserts, 90° cutting geometry (Teknik Makina) 160 mm corner head (T548TM) designed for accurate 90° corner machining with WNMU 0806 indexable inserts in industrial milling and facing operations 160 mm diameter for stable machining 90° cutting geometry for precise corner transitions Compatible with WNMU 0806 Kyocera indexable inserts M5x12 Torx screws; Torx key T20 Maximise stability and reduce vibration for cleaner finishes The 160 mm diameter of this corner head increases mass and stiffness at the cutting zone, which improves stability during interrupted cuts and reduces chatter. With a defined 90° cutting geometry, the tool produces consistent corner transitions that lower the need for secondary finishing, helping to keep cycle times predictable. The head is designed for industrial environments and contributes to repeatable surface quality when paired with properly selected indexable inserts. Designed for compatibility and rapid maintenance Compatibility with WNMU 0806 indexable inserts from Kyocera simplifies procurement and tool management; standardised insert formats mean fast replacement and broad availability. Fastener details such as M5x12 screws and a T20 Torx interface are industry-standard, enabling quick, toolroom-style maintenance without specialised equipment. The compact overall length of 63 mm and a weight of 3.985 kg offer a balanced assembly for stable spindle interaction while remaining easy to handle during tool changes. Productivity gains through efficient cutting geometry and multiple edges Equipped with 12 cutting edges, the head supports multiple index positions, extending service intervals and reducing downtime for insert changes. The combination of a stiff tool body and multiple usable edges drives favourable cost-in-use by spreading tool consumption across more cutting surfaces. As part of Teknik Makina’s product range, this corner head is intended for operators seeking reliable performance in corner and shoulder milling tasks where precision and process stability are priorities. Contact Metav Werkzeuge today to secure the Teknik Makina 160 mm corner head (SKU T548TM) for improved corner machining; specialists at Metav in Emmerich are available to advise on integration and tooling choices via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T548TM Description: 160 mm corner head for WNMU 0806 indexable inserts Manufacturer: Teknik Makina ECLASS: 21181015 Numbers / Core technical data Diameter: 160 mm Total length: 63 mm Weight: 3.985 kg Cutting angle: 90° Number of cutting edges: 12 Torx screw: M5x12 Torx key: T20 Designs / Special features Product type: Corner head Compatible inserts: WNMU 0806 Compatible insert manufacturer: Kyocera SKU reference: T548TM Category: Machining → Corner head FAQ Which insert type fits the corner head? The corner head accepts WNMU 0806 indexable inserts; compatibility with Kyocera WNMU 0806 inserts is specified for the T548TM. How many usable cutting edges are available? The T548TM is specified with 12 cutting edges, allowing multiple index positions to extend time between insert replacements. What fastening hardware is required for insert clamping? Inserts are secured with M5x12 Torx screws using a T20 Torx key for reliable clamping and quick servicing. What applications is this tool head intended for? This corner head is intended for industrial corner and shoulder milling operations where a defined 90° cutting geometry and process stability are required. What are the key dimensional specifications to consider for tool setup? Consider the 160 mm diameter, 63 mm total length, and a mass of 3.985 kg when planning spindle speed, tool holder balance and fixture clearance. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Corner Turning Head for APKT 1604 Indexable Inserts, 90° Cutting Angle, M4x10 Torx - Teknik Makina
Benefit from the combination of a 40 mm shank for rigid clamping, a 90° cutting angle for versatile turning, and direct compatibility with APKT 1604 indexable inserts for consistent production results. Order the Corner tool head directly via Metav Werkzeuge or ask the consultants for tailored advice. Corner tool head – 90° cutting angle, for APKT 1604 indexable inserts (Teknik Makina) The Corner tool head is a compact CNC turning head designed for use with APKT 1604 indexable inserts, offering stable clamping and simple insert changes in machining centres and lathes. For APKT 1604 indexable inserts 90° cutting angle for versatile machining 40 mm shank diameter for stable clamping Torx screw M4x10; T15 key required Maximise process stability and rigidity on the lathe The Corner tool head delivers stable clamping through its solid 40 mm shank and a mass that supports steady cutting forces, which reduces vibration and improves surface finish. The 90° cutting angle provides flexibility across turning, profiling and shoulder cuts, enabling consistent results with a wide range of workpiece geometries. By pairing a robust tool head with industry-standard indexable inserts, the assembly promotes repeatable tool geometry and lowers scrap rates, translating into measurable productivity gains on batch production runs. Fast insert changes and low downtime for shops Designed for practical workshop maintenance, the head secures inserts with an M4x10 Torx screw operated via a T15 key, providing a fast and secure clamping method that shortens service intervals. Compatibility with common supplier inserts such as Korloy means stocked inserts can be swapped quickly without adapter work, helping to keep machines running. The straightforward fastening reduces the risk of incorrect assembly and supports predictable cycle times in mixed-production environments. Consistent geometry for precision machining tasks With a compact overall length and engineered contact surfaces, this turning head maintains cutting geometry across repeated insert indexings. The relatively short 62 mm overall length assists in confined tool positions while the construction supports stable tool overhangs up to the specified diameter, making it suitable for light to medium-duty turning applications. Specifying a dedicated head matched to APKT 1604 inserts simplifies tooling lists and ensures that insert performance is fully exploited for repeatable, high-quality finishes. For reliable delivery from Emmerich and expert advice on integrating Teknik Makina tooling into existing workflows, contact Metav Werkzeuge for tailored guidance and order support. Technical Data SKU: T192TM Name: Corner tool head Brand: Teknik Makina eClass: 21181015 Numbers / Core technical data Shank diameter: 40 mm Diameter: 160 mm Overall length: 62 mm Weight: 4.885 kg Cutting angle: 90° Special features / Compatibility For APKT 1604 indexable inserts Compatible with Korloy inserts Torx screw: M4x10 Torx key: T15 Cuts: 10 FAQ What inserts are compatible with this head? The Corner tool head is designed for APKT 1604 indexable inserts and is compatible with Korloy variants following that designation. Which fastening tool is required for insert changes? Insert clamping uses an M4x10 Torx screw; a T15 Torx key is needed for secure tightening. What shank diameter does the head use for mounting? The head has a 40 mm shank diameter suitable for standard toolholders accommodating that size. Is the head suitable for shoulder and profiling operations? Yes, the 90° cutting angle and rigid construction make it suitable for shoulder turning and general profiling tasks in CNC turning. What is the overall length and how does that affect setup? The overall length is 62 mm, which helps when working in compact setups by limiting tool overhang and improving stiffness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Corner Turning Head for LNMT 1306 Indexable Inserts, 90° Cutting Angle, M4x10 Torx Screw - Teknik Makina
Take advantage of the combination of a 90° cutting geometry and secure 40 mm mounting for precise corner and shoulder machining; the compatibility with LNMT 1306 indexable inserts ensures quick insert replacement and consistent part quality. Order via Metav Werkzeuge or consult the technical advisors for application support. Corner tool head T233TM — 90° cutting angle, 40 mm shank (Teknik Cutting Tools) A durable Corner Tool Head T233TM engineered for accurate cornering and shoulder operations using LNMT 1306 indexable inserts 90° cutting geometry for exact shoulders Compatible with LNMT 1306 indexable inserts 40 mm mounting diameter for secure clamping Supplied Torx screw M4x10 and T15 key Repeatable shoulder accuracy for stable production The design centres on a 90° cutting angle that delivers consistent shoulder faces and right‑angle features across batch production. The straight geometry reduces set‑up variance and simplifies toolpath programming on CNC lathes, while the robust body minimises vibration for improved surface finish. This stability translates directly into fewer reworks and higher first‑pass yields, making the holder a practical choice for precision mechanical workshops and small production lines. Fast insert changes and reliable clamping Equipped for LNMT 1306 style indexable inserts, the holder supports rapid insert replacement with standard fastening: M4x10 Torx screw tightened with a T15 key. The 40 mm mounting diameter provides a secure connection to conventional tool posts and quick‑change adaptors, ensuring repeatable positioning after each change. Compatibility with the specified insert geometry simplifies procurement and reduces inventory complexity for maintenance teams. Engineered for heavy‑duty use and balance The tool head’s overall construction, with a 160 mm head diameter and weighing 5.046 kg, is aimed at robust, stable cutting tasks where rigidity matters. The balanced mass and solid body reduce chatter during interrupted cuts and long, continuous operations. Where applicable, the configuration supports multiple cutting edges — listed as 14 cutting points in the specifications — enabling extended interval times between maintenance checks and insert rotations. Suitable applications and process advantages This tool head is intended for cornering and shoulder turning where repeatability and precise right‑angle profiles are required. Because it accepts LNMT 1306 inserts and matches ISCAR‑type geometries, the holder integrates smoothly into existing tool inventories. Fewer set‑ups, secure clamping and standardised fastening mean shorter changeover times and predictable cycle outputs, helping to maintain throughput in demanding production schedules. For demanding cornering tasks choose the Teknik Cutting Tools solution — contact Metav Werkzeuge in Emmerich for tailored advice and supply (info@metav-werkzeuge.com | +49 2822 7131930) Technical Data Article number: T233TM Manufacturer: Teknik Makina Compatible inserts: LNMT 1306 Matching insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 Facts Diameter: 160 mm Shank / mounting diameter: 40 mm Overall length: 63 mm Weight: 5.046 kg Cutting angle: 90° Cutting edges: 14 Features For LNMT 1306 indexable inserts Secure clamping for repeatable positioning Standard Torx fastening for quick replacement Suited for corner and shoulder machining Robust construction for reduced vibration FAQ Is the tool head compatible with other insert types? The Corner Tool Head T233TM is specified for LNMT 1306 indexable inserts; alternative insert types are not listed in the product data and should be verified before use. What fastening hardware is supplied? The delivery includes the M4x10 Torx screw; tightening requires a T15 Torx key as indicated in the technical details. Can the holder be mounted in standard tool posts? The holder uses a 40 mm mounting diameter suitable for conventional tool posts and many quick‑change systems; ensure the lathe or adaptor accepts this shank size. Which insert manufacturer fits best with this head? The holder is matched to ISCAR‑type geometry and is documented as compatible with LNMT 1306 inserts for predictable seating and cutting performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Corner Turning Head for R390-1806 Indexable Inserts, 90° Cutting Angle, M4x11 Torx - Teknik Makina
Benefit from a rigid 90° cutting solution that accepts R390-1806 indexable inserts and a robust 40 mm shank for secure clamping; the design supports repeatable setups and stable machining. Order directly via Metav Werkzeuge or consult the specialists for application guidance. Corner Tool Head T432TM — 90° holder for R390-1806 indexable inserts, 40 mm shank (Teknik Makina) The Corner Tool Head T432TM is a right‑angle turning head engineered for heavy duty lathe operations, designed to accept R390‑1806 indexable inserts and provide reliable shoulder and face turning where stiffness and repeatability are required. 90° cutting angle for square shoulders Compatible with R390-1806 Sandvik inserts 40 mm shank for high rigidity Torx M4x11 screw with T15 key Stable cutting for repeatable shoulder work The head is built for consistent 90° shoulder machining, delivering a defined geometry that simplifies setup and reduces rework. With a 160 mm head diameter and 40 mm shank, the assembly provides increased mass at the contact zone, which improves rigidity and vibration damping. That structural stability translates into more reliable finishes and longer tool life when paired with the appropriate indexable inserts. Simple integration with standard indexable inserts Designed specifically for the R390‑1806 insert family and compatible with Sandvik formats, the holder removes uncertainty at purchase and reduces spare‑parts complexity. The fastening uses a Torx M4x11 screw operated with a T15 key, enabling secure clamping and straightforward insert changes. The straightforward interface supports fast changeovers, helping to keep machine downtime to a minimum. Compact geometry with industrial endurance The compact overall length of 62 mm and a head body weight of 4.411 kg balance manoeuvrability with the mass required for stable cutting. Where tight tool envelopes and clearance are needed, the compact profile helps maintain access without sacrificing performance. The component is suited to workshops seeking a dependable right‑angle turning solution that integrates with established insert systems. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina Corner Tool Head T432TM into production—phone +49 2822 7131930 or email info@metav-werkzeuge.com for technical clarification and order support Technical data Article number: T432TM Designation: Corner tool head Secondary designation: for R390-1806 Indexable Inserts Manufacturer: Teknik Makina Facts Weight: 4.411 kg Shank diameter: 40 mm Head diameter: 160 mm Overall length: 62 mm Cutting angle: 90° Cutting edges: 10 Special features Compatible with R390-1806 indexable inserts Suitable for Sandvik insert formats Fastening: Torx screw M4x11 Required key: T15 ECLASS: 21181015 FAQ What inserts fit this tool head? The T432TM accepts R390‑1806 indexable inserts; it is specified to work with Sandvik formats compatible with that insert family. Is the shank suitable for heavy‑duty turning? Yes, the 40 mm shank and 160 mm head diameter of the corner tool head provide the structural mass and clamping stability required for demanding shoulder and face turning tasks. How is the insert secured and changed? Inserts are retained with a Torx M4x11 screw; a T15 key is used for secure fastening and quick replacement of the cutting insert. Can the tool head be used in compact tool envelopes? With an overall length of 62 mm, the T432TM is designed to fit restricted tool zones while maintaining necessary rigidity for quality cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Corner Turning Head for SNHU 1206 Indexable Inserts M4x10 Torx T15, 12 Cutting Edges, 63mm Overall Length - Teknik Makina
Benefit from the Ø160 mm diameter and 12 cutting edges for steady, high-volume material removal; the 40 mm holder diameter and M4x10 fixing deliver stable clamping and straightforward reassembly — order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Eckmesserkopf — Corner tool head for SNHU 1206 indexable inserts (Teknik Makina) The Eckmesserkopf is a corner cutting head designed for SNHU 1206 indexable inserts, optimised for robust, repeatable machining in CNC turning and milling tool assemblies. Ø 160 mm diameter for stable cutting 12 cutting edges for high material removal 40 mm holder diameter for secure mounting Compatible with SNHU 1206 inserts (Palbit) Engineered for consistent, high-throughput cutting The cutter head is built around a large Ø160 mm diameter and a set of 12 cutting edges, which together reduce vibration and distribute cutting forces more evenly. This configuration supports higher material removal rates and prolongs tool life by preventing concentrated wear. The design suits production-oriented tool stacks where stability and predictable cycle times matter, making the component a reliable choice for repetitive shoulder and corner operations in steel and alloy workpieces. Secure fastening and straightforward maintenance Fastening is carried out with an M4x10 Torx screw that uses a T15 key, providing a compact, repeatable clamping interface that simplifies changeovers and minimises downtime. The head accepts SNHU 1206 indexable inserts — a common insert format supplied by manufacturers such as Palbit — so replacement inserts are readily available and easy to source. Clear specification of the fixing and insert type helps technicians plan spares and maintenance intervals without ambiguity. Compact integration and machine-ready dimensions With a 40 mm holder diameter and an overall length of 63 mm, this head integrates into standard tool holders while maintaining a compact footprint that supports tool balancing and predictable overhang behaviour. The tool's mass of 4.328 kg contributes to stable cutting dynamics on medium to heavy-duty machines. These measurable characteristics allow process engineers to calculate stiffness, select suitable spindle speeds and feeds, and reduce the risk of chatter — all contributing to higher first-pass yields in series production. Contact Metav Werkzeuge in Emmerich for tailored tooling recommendations and fast specification checks when integrating Teknik Makina cutting heads into existing CNC setups Technical data Article number: T622TM Designation: Corner tool head (Eckmesserkopf) For: SNHU 1206 indexable inserts Manufacturer: Teknik Makina Core measurements Diameter: 160 mm Number of cutting edges: 12 Overall length: 63 mm Shank/holder diameter: 40 mm Weight: 4.328 kg Features & compatibility Compatible with Palbit inserts Fixing screw: M4x10 (Torx) Torx key: T15 FAQ Which insert type fits this head? The head is specified for SNHU 1206 indexable inserts; compatibility with Palbit variants is confirmed for the listed geometry. What is the required holder diameter? A 40 mm holder diameter is required for correct mounting and to ensure rated stiffness. How many cutting edges does the head provide? The tool body carries 12 cutting edges, enabling higher material removal with improved stability. What screw and key are used for fastening? Fastening is by an M4x10 Torx screw driven with a T15 key; these specifications aid planning for spares. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Corner Turning Head for SPMT 1204 Indexable Inserts, 10 Cutting Edges, 63mm Overall Length, M5x12 Clamp Screw - Teknik Makina
Take advantage of a compact, compatible tool head that combines reliable fit with sturdy mass for improved vibration control; designed for use with SPMT 1204 indexable inserts, a 40 mm shank and 160 mm head ensure stable engagement and consistent machining results. Order the Eckmesserkopf T655TM directly via Metav Werkzeuge or consult our specialists for application guidance. Eckmesserkopf T655TM — Tool head for SPMT 1204 indexable inserts, 160 mm head diameter (Teknik Makina) The Eckmesserkopf T655TM is a precision tool head designed for use with SPMT 1204 indexable inserts, suited to machining tasks that demand repeatable clamping and robust head geometry. Compatible with SPMT 1204 indexable inserts 40 mm shank diameter for stable clamping 160 mm head diameter for deep reach Robust 3.98 kg mass for vibration damping Predictable compatibility for consistent results The holder was developed to deliver consistent fit with SPMT 1204 indexable inserts, ensuring predictable seating and indexed repositioning during insert changes. Compatibility reduces set-up time and supports repeatable tool offsets in the machine control, which in turn lowers scrap rates and increases uptime. The design includes a standard Torx screw M5x12 with a T20 drive, simplifying insert clamping and maintenance without requiring special fasteners. Stability and dynamic performance for cleaner surfaces A 40 mm shank and a 160 mm head diameter provide a balance between rigidity and reach, enabling stable cutting conditions on medium to heavier cuts. The assembly mass of 3.98 kg contributes to natural damping of low-frequency vibration, which improves surface finish and lengthens insert life under comparable cutting parameters. The construction supports operators who prioritise controlled chip formation and dimensional accuracy over extended cycles. Workshop integration and service-friendly handling The component’s compact overall length of 63 mm and straightforward fastening concept make it easy to integrate into existing toolholders and turret stations without complex modifications. The toolhead supports quick insert indexing and routine maintenance procedures, helping to keep toolroom turnaround times short. For procurement and stocking, Metav Werkzeuge provides transparent availability from Emmerich and technical advice for correct selection and installation. For tailored machining advice, stock checks or specification confirmation for the Teknik Makina Eckmesserkopf T655TM, contact Metav Werkzeuge for a specification check and rapid dispatch from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: T655TM Name: Eckmesserkopf Description: for SPMT 1204 Indexable Inserts Facts Diameter: 160 mm Shank diameter: 40 mm Total length: 63 mm Weight: 3.98 kg Number of cutting edges: 10 Torx screw: M5x12 Torx key size: T20 Special features Compatible with SPMT 1204 indexable inserts Compact overall length for easy integration Robust design for vibration damping FAQ Which inserts fit this tool head? The Eckmesserkopf T655TM is designed for SPMT 1204 indexable inserts and secures them with the supplied Torx clamping screw system. What are the key mounting dimensions? Relevant mounting figures for the tool head are a 40 mm shank diameter and a 160 mm head diameter, with an overall length of 63 mm for integration planning. How does the tool head affect surface quality? The mass of 3.98 kg and the rigid shank geometry improve vibration damping, which helps to produce a more consistent surface finish and extend insert life. Which screw and driver are required for insert clamping? Clamping is performed with a Torx screw M5x12 using a T20 driver for reliable and repeatable tightening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Corner Turning Head for TPKN 1603-2204 Indexable Inserts 90° Cutting Angle, M8x24 Fixing - Teknik Makina
Take advantage of the combination of robust stiffness, precise compatibility with TPKN 1603–2204 indexable inserts and straightforward clamping for uninterrupted turning operations — order the Eckmesserkopf directly via Metav Werkzeuge or ask our consultants for application advice. Eckmesserkopf — 90° turning head for TPKN 1603–2204, Ø160, D40 shank (Teknik Makina) The Eckmesserkopf is a purpose-built 90° turning head for external turning and facing operations, engineered to accept TPKN 1603–2204 indexable inserts for efficient material removal in CNC and turret lathe applications. 90° cutting angle for reliable facing Compatible with TPKN 1603–2204 inserts D40 shank with Ø160 head diameter Secure M8x24 clamping screw Stable machining from a compact, heavy head A rigid Ø160 head combined with a substantial mass of 4.15 kg provides inherent damping for improved cutting stability. This construction reduces vibration and supports consistent surface quality in interrupted and continuous cuts, delivering the principal benefit of higher process reliability. The 90° geometry produces predictable chip flow and concentricity, which is particularly useful for facing and shoulder operations in serial production or job-shop environments. Rapid, secure insert clamping for predictable changeovers The toolhead accepts standard TPKN 1603–2204 indexable inserts, enabling quick insert replacement with minimal setup time. A M8x24 clamping screw and a 5 mm Allen key interface ensure a secure seat and repeatable clamping force, reducing the risk of insert movement under load. The practical result is less downtime during maintenance intervals and a clear improvement in throughput for medium- to heavy-duty turning tasks. Compatibility that simplifies tooling logistics By supporting common insert formats and featuring a D40 shank, this head integrates cleanly into existing tool systems and holders, reducing the need for special adapters. The design helps centralise tooling stocks and streamlines ordering for production shops that standardise on TPKN inserts, which in turn reduces procurement complexity and supports faster response to varying batch sizes. Built for continual production with clear handling benefits An overall length of 62 mm and an effective measurement e = 66.7 mm deliver compact installation without sacrificing rigidity, while the head’s configuration with seven cutting edges increases utilitarian longevity between interventions. These attributes combine to lower total process interruptions and make the component suited to demanding lathe programmes where predictable tool life and secure clamping are essential. For precise turning applications, choose Teknik Cutting Tools' robust turning head and contact Metav Werkzeuge for tailored procurement guidance and prompt delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: T134TM Manufacturer: Teknik Makina e = 66.7 mm Head diameter: 160 mm Shank diameter (D): 40 mm Overall length: 62 mm Weight: 4.15 kg Cutting angle: 90° Cutting edges: 7 For indexable inserts: TPKN 1603–2204 Compatible insert type: TPKN 2204 Clamping screw: M8x24 Allen key: 5 mm FAQ What insert types are compatible with this turning head? The turning head is compatible with TPKN 1603–2204 indexable inserts, allowing use of both TPKN 1603 and TPKN 2204 sizes depending on the chosen insert specification. Is the toolhead suitable for heavy interrupted cuts? Yes; the Eckmesserkopf benefits from a Ø160 head and a mass of 4.15 kg, which increases damping and supports stable cutting under interrupted conditions. Which shank diameter is required for mounting? The tool requires a D40 shank interface for secure mounting in compatible toolholders and turrets. How is the insert secured in the head? Inserts are fixed using a M8x24 clamping screw; tightening and loosening is performed with a 5 mm Allen key for repeatable clamping. Does the head require long installation space on the turret? Its 62 mm overall length and compact profile are designed for minimal overhang while maintaining rigidity, making it suitable for confined tool stations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Corner Turning Head for XNEX 0806 Indexable Inserts, 90° Cutting Angle, M4x12.5 Fastening - Teknik Makina
Take advantage of the combination of a 160 mm large-diameter tool body, 12 cutting edges and a secure Ø40 mm shank to increase material removal rates while maintaining stability in shoulder and face milling operations; order this corner milling head directly via Metav Werkzeuge or consult the specialists for application advice. Corner Milling Head T850TM – 160 mm diameter, 90° cutting angle (Teknik Makina) The Corner Milling Head T850TM is a heavy‑duty milling solution developed for accurate shoulder and face milling with XNEX 0806 indexable inserts. 160 mm diameter for broad engagement 90° cutting angle for precise shoulder milling Compatible with XNEX 0806 indexable inserts 12 cutting edges for efficient material removal Maximise throughput with a large-diameter design The large 160 mm tool body together with 12 cutting edges is engineered to increase throughput in batch and serial milling. A higher number of cutting edges reduces chip load per insert and enables more consistent cutting conditions across the tool path, which results in improved cycle times and longer insert life. The configuration is particularly effective where broad face contact and fast material removal are priorities, delivering measurable gains in process efficiency and predictable output for production runs. Achieve exact shoulders and stable machining results A true 90° cutting angle guarantees square, repeatable shoulder geometry without complex compensations. The combination of a Ø40 mm shank and a mass of 5.154 kg improves tool rigidity and dampens vibration, which helps maintain dimensional accuracy and surface finish. These mechanical characteristics translate into lower rework rates and tighter tolerances on machined components, supporting consistent part quality even under demanding cutting conditions. Fast tool changes and secure clamping for industrial use Insert and fastening design focuses on quick maintenance cycles: the head accepts XNEX 0806 indexable inserts and is compatible with inserts from SECO and WINSTAR, reducing stocking complexity. Inserts and the tool body are secured with M4x12.5 Torx screws; an T15 Torx key is specified for safe tightening. This standardised fastening arrangement minimises downtime during insert replacement and simplifies assembly work in machine shops where rapid tool turnover is required. Built for production environments and dependable supply Constructed for robust service life and repeatability, the head is suitable for continuous workshop use and heavy milling tasks. The engineering focus on stable mounting and repeatable clamping supports long production cycles with fewer interruptions. Supplied through Metav Werkzeuge, customers benefit from a European distribution hub that acts as a quality filter, ensuring reliable availability and consistent product provenance for industrial buyers and trade customers. Discuss application requirements with Metav Werkzeuge to match the right Teknik Makina corner milling head to the machining task or to request detailed drawings and compatibility data — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T850TM Manufacturer: Teknik Makina Name: Corner milling head (Eckmesserkopf) Designation: for XNEX 0806 Indexable Inserts Core data Diameter: 160 mm Shank diameter: 40 mm Overall length: 63 mm Weight: 5.154 kg Cutting angle: 90° Cutting edges: 12 Special features Compatible inserts: XNEX 0806 Compatible insert manufacturers: SECO, WINSTAR Fastening screw: M4x12.5 Torx Torx key size: T15 FAQ Which indexable inserts fit this milling head? The head is designed for XNEX 0806 indexable inserts and accepts equivalent inserts from manufacturers such as SECO and WINSTAR. What shank size is required for mounting the tool? The tool features a Ø40 mm shank, which requires a matching holder or arbor designed for a 40 mm mounting diameter to ensure secure clamping. How many cutting edges does the head provide and what is the diameter? The milling head provides 12 cutting edges and has a 160 mm diameter, making it suitable for broad face engagement and productive material removal. What fastening hardware is used for the inserts? Inserts are secured with M4x12.5 Torx screws; a T15 Torx key is specified for tightening and removal. Is the head suitable for square shoulder milling? Yes — the 90° cutting angle is intended for accurate square shoulder and face milling applications, delivering consistent right-angle profiles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Corner Turning Tool Head for TPKN 1603-2204 Indexable Inserts, 90° Cutting Angle, M8x24 Locking Screw - Teknik Makina
Compact corner turning head with a 90° cutting angle and support for TPKN 1603–2204 indexable inserts ensures stable clamping and repeatable profiles; ideal where consistent surface finish and fast insert changes matter. Benefit from a 160 mm diameter and robust M8 locking for reduced vibration—order via Metav Werkzeuge or consult our specialists for application matching. Corner tool head T110TM — indexable turning head, 160 mm diameter, for TPKN inserts (Teknik Makina) Corner tool head T110TM designed for precise facing, profiling and external turning with TPKN 1603–2204 indexable inserts, offering a secure clamping solution for medium to heavy machining tasks 160 mm diameter for stable engagement Compatible with TPKN 1603–2204 inserts M8 locking screw and TA012 clamp plate 7 cutting edges for extended tool life Consistent metal removal with a rigid, 90° geometry The tool head delivers a 90° cutting angle and a large-diameter body to maintain cutting stability during demanding turning operations. The combination of a 160 mm diameter and the specified geometry reduces chatter and vibration, which translates into improved surface finish and predictable tool wear. Designed for indexable insert systems, this solution simplifies process planning: the machine operator benefits from predictable cutting forces and a reliable contact area for each machining pass, resulting in fewer scrap parts and steadier cycle times. Fast insert changes and repeatable clamping for uptime Clamping and maintenance are engineered for workshop efficiency: the head uses a TA012 clamp plate secured by an M8x24 locking screw, with hex screws M4x10 for auxiliary fixation and an Allen key size 5 for service. This arrangement ensures that insert seating is repeatable after each change, so setup time is cut and dimensional scatter is minimised. Clear mechanical retention also supports safe high-feed passes and lowers the likelihood of insert movement under load, which is crucial for uninterrupted production schedules. Productivity through extended tool life and straightforward integration With 7 cutting edges and a compact overall profile, the head promotes longer intervals between indexings and lowers consumable turnover. The body weight of 4.22 kg, a mounting bore of Ø40 mm, and an overall length of 62 mm make the unit suitable for a broad range of turret and toolpost interfaces while keeping balance and inertia within acceptable limits for many turning applications. The design prioritises compatibility with the common TPKN family, allowing customers to consolidate insert stocks and reduce logistical complexity — a practical route to greater shop-floor efficiency. Contact Metav Werkzeuge for delivery options, technical matching and specification advice on the Teknik Cutting Tools corner tool head T110TM with 90° cutting geometry Technical Data SKU: T110TM Name: Corner tool head (Eckmesserkopf) Brand: Teknik Makina For inserts: for TPKN 1603–2204 Indexable Inserts Facts Diameter: 160 mm e (measured): 66.7 mm Mounting bore: Ø40 mm Overall length: 62 mm Weight: 4.22 kg Cutting angle: 90° Special features For TPKN 1603–2204 indexable inserts Locking screw: M8x24 Clamp plate: TA012 Hex screw: M4x10 Allen key: size 5 7 cutting edges FAQ Which indexable inserts are compatible with this head? The corner tool head T110TM is specified for TPKN 1603–2204 indexable inserts and is optimised for that insert geometry and seating. What is the cutting angle and what does it suit? The head provides a 90° cutting angle, suitable for facing, shoulder turning and profiling tasks where a square shoulder or right-angled feature is required. How are inserts clamped in the tool head? Insert clamping is achieved via the TA012 clamp plate together with an M8x24 locking screw and additional M4x10 hex screws, ensuring repeatable seating and secure fixation. What mounting interface does the head require? Mounting requires a bore of Ø40 mm and the unit has an overall length of 62 mm; the mass is 4.22 kg, so check turret or toolpost load ratings before fitting. How does the head reduce tooling costs? By supporting 7 cutting edges and a common insert family, the T110TM reduces spare-part variety and extends intervals between indexings, which lowers consumable consumption and administrative effort. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Face Cutter For SNKX 1206 Indexable Inserts 45° Cutting Angle, D40mm Ø173mm Max - Teknik Makina
Take advantage of a compact, high‑performance milling solution that combines robust mounting with broad insert compatibility for reliable productivity. The combination of a 40 mm bore, a 45° cutting angle and compatibility with SNKX 1206 indexable inserts supports efficient surface milling and low downtime — order via Metav Werkzeuge or request technical advice from the team. Face-milling head T334TM — for SNKX 1206 indexable inserts, 160 mm body (Teknik Makina) A Face-milling head T334TM engineered for heavy-duty surfacing and finishing applications using SNKX 1206 indexable inserts across a range of carbide manufacturers Compatible with SNKX 1206 indexable inserts Ø160 mm body with Ø173 mm max cutting 45° cutting angle for controlled chip formation 40 mm mounting bore for rigid clamping Increased throughput through optimised cutting geometry The milling head's 45° cutting angle and substantial cutting radius deliver steady material removal with reduced impact loads per tooth, which results in smoother surfaces and extended insert life. With an effective Ø173 mm max cutting diameter, the tool covers wide swarf paths while the body diameter of Ø160 mm maintains tool stability. This geometry is particularly suitable for medium to large face milling tasks where a balance of surface quality and productivity is required. The use of SNKX 1206 inserts allows for rapid indexation and minimal interruption during production. Stable mounting and vibration reduction for consistent results A solid 40 mm bore and the compact design help to reduce run-out and vibration during machining, supporting reproducible tolerances even under elevated cutting forces. The assembly weight of 5.38 kg and the overall length of 63 mm contribute to a low centre of gravity and predictable dynamic behaviour. These mechanical attributes lower the risk of chatter and promote longer tool life, enabling higher feed rates and improved cycle times without sacrificing finish quality. Fast servicing and wide inserts compatibility to minimise downtime Insert clamping utilises an M4x12.5 Torx screw with a T15 key, enabling quick, secure changes and straightforward maintenance routines. The head is specified for SNKX 1206 indexable inserts and is compatible with major carbide suppliers such as Böhlerit, Korloy, Palbit, facilitating supply chain flexibility. The combination of standardised fixation and widespread insert availability reduces stock complexity and helps maintain production continuity when regrinding or replacement inserts are required. For tailored configuration and supply of Teknik Makina face‑milling heads, contact Metav Werkzeuge for expert technical advice and prompt delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T334TM Manufacturer: Teknik Makina Designation: Face-milling head for SNKX 1206 indexable inserts Core dimensions Cutting diameter max: 173 mm Body diameter: 160 mm Mounting bore: 40 mm Overall length: 63 mm Weight: 5.38 kg Cutting angle: 45° Cutting edges: 12 Features Compatible with SNKX 1206 indexable inserts Compatible insert brands: Böhlerit, Korloy, Palbit Torx screw: M4x12.5, key T15 ECLASS: 21181015 FAQ Which indexable inserts fit this milling head? The face‑milling head accepts SNKX 1206 indexable inserts; compatibility with brands such as Böhlerit, Korloy, Palbit is confirmed for the T334TM. What mounting interface is required? A rigid mounting with a 40 mm bore is required; the specified 40 mm mounting shank provides the stable clamping interface for the T334TM. What is the maximum effective cutting diameter? The head offers an Ø173 mm maximum cutting diameter while the tool body measures Ø160 mm, suitable for broad surface passes. How are the inserts secured and serviced? Inserts are fastened with an M4x12.5 Torx screw using a T15 key, allowing quick replacement and secure clamping to reduce downtime. For which machining tasks is the head most suitable? The milling head is intended for face milling and surfacing operations where a combination of removal rate and surface finish is required; the 45° cutting angle supports controlled chip formation and improved surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Face Mill for OFCR 0704 inserts - Teknik Makina
Detailed Technical Data: Order Number: T269TM Item: Face Mill usable with OFCR 0704 Indexable Inserts Brand: Teknik Makina Quantitative Specifications: Diameter: 160mm Cutting Edges: 12 Weight: 5.112kg Total length: 62mm Diameter Connection: 40mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
160mm Face Mill for Sandvik R390-1704 inserts - Teknik Makina
Available Technical Details: Item: Face Mill Brand: Teknik Makina Order Number: T416TM usable with R390-1704 Indexable Inserts the Hersteller's Sandvik Diameter: 160mm Angle: 90° Total length: 62mm Diameter Connection: 40mm Cutting Edges: 10 Weight: 5.01kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
160mm Face Mill for Sandvik, XTC and ZCC SEET R245 12T3 inserts - Teknik Makina
Characteristics: Order Number: T570TM Item: Face Mill usable with SEET R245 12T3 Indexable Inserts the Herstellers Sandviks, XTCs und ZCCs Brand: Teknik Makina Quantitative Specifications: Diameter: 160mm Cutting Edges: 10 Weight: 4.59kg Total length: 63mm Diameter Connection: 40mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
160mm Face Milling Cutter for HNHX 1006 Indexable Inserts 55° Cutting Angle, 12 Inserts, 62mm Overall Length - Teknik Makina
Take advantage of a robust milling solution that combines dependable compatibility with HNHX 1006 indexable inserts and a generous Ø160 mm cutting diameter for consistent stock removal; order the tool directly via Metav Werkzeuge or request advice from our consultants. Face milling head — Ø160 mm milling cutter head for HNHX 1006 indexable inserts (Teknik Makina) A compact, heavy‑duty face milling head engineered for stable finishing and medium‑duty roughing on conventional and CNC milling spindles Ø 160 mm machining diameter Compatible with HNHX 1006 indexable inserts 55° cutting angle for improved surface quality Torx M5x12 fastening, T20 key required Reliable capacity and precise balancing for efficient material removal The milling cutter is built around a Ø 160 mm head that offers a broad engagement zone while keeping vibration low; this allows a steady material removal rate and improved tool life. The 12 cutting edges configuration spreads cutting forces, which results in less stress per edge and a smoother load profile. The solid 40 mm shank diameter ensures stable clamping in standard toolholders, while the measured mass of 4.724 kg contributes to consistent spindle dynamics. These characteristics translate into predictable cycle times and reproducible part quality in serial production. Quick insert changes and straightforward assembly reduce downtime Designed for use with HNHX 1006 indexable inserts from Taegutec, the head uses M5x12 Torx screws secured with a T20 key for repeatable seating and simple maintenance. Indexable inserts enable rapid edge changes without regrinding — worn edges are replaced rather than resharpened, lowering turnaround time. The 55° cutting angle promotes a favourable chip flow for machined faces, which helps achieve improved surface finish with fewer passes. Clear mechanical connections and standardised fixing hardware make the assembly process transparent for workshop technicians. Versatile compatibility for workshop and industrial environments This tool is suited to general workshop and light industrial use where flexibility and ease of handling are valued. Compatibility with Taegutec insert geometries provides access to a wide range of grades for steel, stainless steel and cast iron applications (select inserts according to material). The robust construction and standard interface allow integration into existing toolsets without special adapters. The item is identifiable as SKU T478TM and carries the Teknik Makina designation, offering a recognised mechanical solution where durable mounting and repeatability are priorities. For procurement or technical advice on the Teknik Makina face milling head with Ø160 mm capacity, contact Metav Werkzeuge for detailed guidance and ordering support — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T478TM Manufacturer: Teknik Makina Designation: Face milling head for HNHX 1006 indexable inserts Compatible insert type: HNHX 1006 Facts Diameter: 160 mm Shank / mounting diameter: 40 mm Overall length: 62 mm Weight: 4.724 kg Number of cutting edges: 12 Cutting angle: 55° Special features Torx screw: M5x12 Torx key size: T20 Compatible insert manufacturer: Taegutec SKU: T478TM FAQ What inserts fit this milling head? The face milling head accepts HNHX 1006 indexable inserts; compatible insert grades from Taegutec are commonly used for varied materials. Which fastening hardware is required for mounting the inserts? Insert clamping is achieved with M5x12 Torx screws tightened using a T20 key, as specified for secure and repeatable seating. Is the tool suitable for standard toolholders? Yes — the 40 mm shank diameter is designed for conventional toolholder systems, offering stable clamping for routine milling operations. What is the SKU and who manufactures the head? The product is listed as T478TM and is produced by Teknik Makina; Metav Werkzeuge can provide procurement and compatibility advice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com