Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
160mm Face Milling Cutter for SNKX 1606 and ONHX 0606 Indexable Inserts, 45° Cutting Angle, 63mm Overall Length - Teknik Makina
Benefit from a combination of precise 45° cutting geometry and broad insert compatibility for reliable facing operations; the rigid 40 mm shank and secure M5x12 Torx fastening reduce vibration and setup time. Order the face milling head directly via Metav Werkzeuge or consult their specialists for application advice. Face milling head by Teknik Makina – 160 mm, 45° cutting angle Face milling head for SNKX 1606 and ONHX 0606 indexable inserts, built for stable, high-efficiency facing and light roughing in production environments Face milling head for SNKX/ONHX inserts 160 mm diameter with 45° cutting angle Shank Ø 40 mm for rigid mounting Fixing screw M5x12; Torx T20 key Faster material removal with consistent surface quality The 160 mm diameter and 45° cutting angle deliver an efficient cutting geometry that balances material removal rate and surface finish. With 10 cutting edges, the tool head spreads cutting forces across multiple inserts, which reduces individual insert load and extends usable tool life. The design supports stable chip flow and predictable cutting behaviour, enabling shorter cycle times on facing passes without compromising finish quality. This geometry is particularly suited to medium-duty facing where a combination of productivity and consistent results is required. Stable clamping and quick insert service to cut downtime A 40 mm shank and a total mass of 4.712 kg provide the rigidity needed to keep vibration low during operations, improving tool life and part accuracy. The insert seats are secured with M5x12 screws tightened with a T20 Torx key, ensuring repeatable clamping torque and straightforward replacement. The secure fixing arrangement reduces setup variation and makes insert changes rapid and reliable, helping to maintain throughput on busy shopfloors. The compact overall length of 63 mm assists with clearance in many turret and arbor configurations. Broad compatibility for flexible workshop integration Engineered for SNKX 1606 inserts and compatible with ONHX 0606 (including Palbit ONHX 0606 as an alternative), the head supports a common insert family that is widely stocked, simplifying spare-part management. The combination of robust mounting, proven insert standards and a 45° approach angle makes this cutter head a practical choice for a variety of facing tasks across light and medium machining centres. Supplied as a ready-to-fit unit, the head integrates into standard tool-change routines and is suitable for shops looking to standardise on dependable, indexable-insert tooling. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina face milling head and to arrange supply directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T633TM Manufacturer: Teknik Makina Designation: Face milling head for SNKX 1606 and ONHX 0606 indexable inserts Core technical data Diameter: 160 mm Overall length: 63 mm Shank diameter: 40 mm Weight: 4.712 kg Cutting angle: 45° Number of cutting edges: 10 Compatibility and special features Accepts SNKX 1606 inserts Alternative: ONHX 0606 Palbit Fixing screw: M5x12 (Torx T20) 40 mm shank for secure mounting FAQ What inserts fit this cutter head? The Teknik Makina face milling head accepts SNKX 1606 indexable inserts and is also compatible with ONHX 0606, including Palbit ONHX 0606 as an alternative. What are the key dimensions for mounting? Shank diameter is 40 mm, overall length 63 mm and cutter diameter 160 mm, providing a rigid interface for many turrets and arbors. Which fasteners are used for insert clamping? Insert clamping uses M5x12 screws; a T20 Torx key is specified for reliable tightening and repeatable clamping torque. How does the 45° cutting angle affect machining? The 45° cutting angle reduces axial cutting forces and improves surface finish on facing passes while maintaining efficient material removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Face Milling Head for HNGX 0906 Indexable Inserts, 55° Cutting Angle, 12 Cutting Edges, M4.5x11 Torx - Teknik Makina
Take advantage of the combination of robust cutting capacity, secure clamping and proven compatibility for reliable face-milling performance; order the face-milling head directly via Metav Werkzeuge or ask the consultants for application advice Face-milling head T422TM — 160 mm diameter, for HNGX 0906 indexable inserts by Teknik Makina The face-milling head T422TM is designed for heavy-duty surface milling with HNGX 0906 indexable inserts and standard toolholders Face mill Ø160 mm for HNGX 0906 12 cutting edges for high material removal 40 mm shank for secure toolholder fit Compatible with Pramet indexable inserts Shorter cycle times through higher cutting capacity The face-milling head delivers increased material removal thanks to its Ø160 mm diameter and 12 cutting edges, which together allow larger table feed per revolution and fewer passes. The 55° cutting angle reduces cutting forces while maintaining an efficient chip flow; this geometry helps maintain surface quality at elevated feed rates and supports economical machining strategies in production environments. Specifying an indexable system keeps tooling turnover fast and repeatable, reducing non-productive time and supporting a predictable machining cycle. Secure clamping and straightforward maintenance reduce downtime Designed for stable mounting, the unit features a 40 mm shank and is supplied with M4.5x11 Torx screws secured by a T15 key for repeatable insert seating. The solid mass of 3.962 kg balances stiffness and vibration damping, improving tool life and insert performance under load. Quick insert changes and standardised fasteners cut maintenance time; fewer interruptions mean smoother production and lower total cost of operation over the life of the cutter head. Flexible fleet compatibility for mixed-toolshops Built to accept HNGX 0906 indexable inserts and to work with Pramet inserts, the head integrates into existing indexable-insert systems without custom adapters. The T422TM suits face-milling tasks where high stock removal and consistent surface finish are required, supporting standardisation across toolrooms. Supplied documentation and file references simplify tool management and spare-part ordering, enabling straightforward replacement planning and consistent process control. Speak to Metav Werkzeuge to discuss integrating the Teknik Makina face-milling head into the production line and to confirm available inserts and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T422TM Brand: Teknik Makina Product: Face-milling head for HNGX 0906 indexable inserts Suitable for inserts manufacturer: Pramet Diameter: 160 mm Shank diameter: 40 mm Overall length: 63 mm Weight: 3.962 kg Cutting angle: 55° Cutting edges: 12 Compatible inserts: HNGX 0906 Compatible insert brands: Pramet Torx screw: M4.5x11 Torx key: T15 Files (migration): 62d941bca9cff922f4700ce1, 62d941bc2cb5a5457b1a9eba FAQ Which insert type is required for this cutter head? The T422TM face-milling head is designed for HNGX 0906 indexable inserts and accepts compatible Pramet grades for the application. What shank size and mounting are needed? The face-milling head features a 40 mm shank diameter and is intended for holders that accept a 40 mm tool neck. How many cutting edges does the head provide and what is the angle? The T422TM supplies 12 cutting edges with a 55° cutting angle, optimised for higher feed and stable cutting. Which fasteners are used for insert clamping? Insert clamping on the face-milling head is via M4.5x11 Torx screws, tightened with a T15 key for secure seating and easy replacement. Is the cutter head compatible with Pramet inserts? Yes, the T422TM is compatible with Pramet indexable inserts in the HNGX 0906 format and integrates into standard indexable systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Face Milling Head for ONMU 0505 Indexable Inserts, 45° Cutting Angle, M5x12 Torx Clamp - Teknik Makina
Take advantage of a combination of high material removal capacity and repeatable clamp security for uninterrupted facing operations; the robust 160 mm diameter cutter body with 12 cutting edges and a 45° geometry delivers efficient stock removal and improved surface finish. Order the T801TM directly via Metav Werkzeuge or consult the specialists for configuration advice. Face milling head T801TM for ONMU 0505 indexable inserts — 160 mm, 12 edges (Teknik Cutting Tools) Face milling head T801TM designed for heavy-duty facing applications using ONMU 0505 indexable inserts; suitable for industrial milling where rigidity and reproducible results are required Face milling head for ONMU 0505 inserts 160 mm diameter, 12 cutting edges 45° cutting angle for effective facing 40 mm shank diameter, secure M5x12 fixation Consistent removal rate and improved surface quality The robust cutter body offers a 160 mm diameter and a 45° cutting angle, which together reduce cutting forces and spread load across multiple edges. This geometry leads to a steadier feed and a finer finished surface when facing billets or large flanges. With a 12 cutting edges configuration, wear is distributed evenly, allowing longer intervals between indexings and fewer tool changes — a direct benefit for cycle-time critical production. Rigidity and reliable insert clamping for repeatable accuracy A solid 40 mm shank and a secure clamping system that uses an M5x12 Torx screw tightened with a T20 key ensure the cutter maintains position under load. The heavy tool mass contributes to vibration damping, which supports dimensional stability during passes. Clear mechanical fixing reduces the risk of micro-movement at the insert seat and helps preserve cutter geometry, translating into repeatable part accuracy across production batches. Compatibility and practical maintenance for continuous use Engineered specifically for ONMU 0505 indexable inserts and compatible with ISCAR plate types, the head simplifies tooling inventories by standardising on a common insert form. The layout permits quick insert indexing and straightforward screw access for maintenance, lowering downtime. The compact overall length and balanced edge count support both rough facing and semi-finishing tasks while keeping handling and storage straightforward. For procurement of the Teknik Cutting Tools face milling head T801TM and expert advice on integration, contact Metav Werkzeuge for efficient supply from Emmerich and tailored technical support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T801TM Manufacturer: Teknik Makina Product: Face milling head (Planmesserkopf) Suitable for: ONMU 0505 indexable inserts (ISCAR) Torx screw: M5x12 Torx key: T20 Core dimensions Diameter: 160 mm Cutting edges: 12 Cutting angle: 45° Shank diameter: 40 mm Overall length: 62 mm Weight: 4.863 kg eClass: 21180902 Features Compatible with ISCAR ONMU 0505 inserts 12-edge configuration for extended tool life 45° geometry for improved surface finish Secure clamping via M5x12 Torx screw FAQ What inserts fit the T801TM face milling head? The T801TM is designed for ONMU 0505 indexable inserts and is compatible with ISCAR insert variants specified for that size. How is the insert secured in this milling head? Inserts are clamped using an M5x12 Torx screw; the recommended key for tightening is a T20 to ensure correct torque and repeatable clamping. Which cutting angle does the cutter use and what is the benefit? The head has a 45° cutting angle, which reduces axial forces, improves chip formation and typically yields a better surface finish compared with steeper geometries. What are the main dimensions to check for machine compatibility? Key dimensions are the 160 mm diameter, 40 mm shank diameter and an overall length of 62 mm; the weight is listed as 4.863 kg. Is the T801TM suited for heavy-facing operations? The cutter’s multiple-edge layout and solid shank make the T801TM appropriate for facing and heavy material removal where rigidity and stable clamping are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Face Milling Head for PNHX 1105 Indexable Inserts L63mm, 14 Teeth, Ø165mm Max Cutting Diameter - Teknik Makina
Take advantage of a high-capacity face milling solution that combines a large 160 mm diameter, 14 cutting edges and compatibility with PNHX 1105 indexable inserts for efficient, repeatable surface machining; order directly via Metav Werkzeuge or ask our consultants if needed. Face milling cutter head (Planmesserkopf) – 160 mm diameter, PNHX 1105 compatible by Teknik Makina The Face milling cutter head for PNHX 1105 indexable inserts is a precision-engineered tool for heavy-duty face milling, offering stable cutting performance and straightforward insert replacement in industrial machining environments 160 mm diameter for large face milling Compatible with PNHX 1105 indexable inserts 14 cutting edges for high material removal Robust build, total length 63 mm Boosted throughput with a large cutting envelope The large 160 mm diameter and a maximum cutting diameter of 165 mm provide an enlarged cutting envelope that reduces the number of passes required for wide faces, increasing throughput on series parts. With 14 cutting edges, each tool change interval is extended, which lowers non-productive time and supports longer uninterrupted runs. The geometry yields stable engagement and, together with the specified 60° cutting angle, promotes efficient chip formation and predictable cutting forces, making this cutter head suitable for production-focused machining where cycle time matters. Reliable insert interface for repeatable accuracy Designed for use with PNHX 1105 indexable inserts and compatible with inserts from Palbit, the head ensures a reproducible seating and clamping condition, which aids dimensional consistency across batches. The Torx fastening system uses a Torx T15 key and M4x10 screws, enabling secure clamp retention and fast serviceability at the machine. This combination reduces setup deviations and simplifies maintenance procedures, so operators and technicians benefit from predictable, repeatable performance without complex alignment tasks. Robust construction that minimises downtime A compact overall length of 63 mm and solid construction, reflected in the unit mass of 3.715 kg, lend the assembly high stiffness for less chatter and better surface finishes on cast and alloy steels as well as general workshop materials. The sturdy design decreases the risk of accidental damage during handling and supports higher material-removal rates without sacrificing stability. Quick insert rotation and the ample number of cutting edges together reduce total tooling consumption and contribute to lower life-cycle costs for high-volume machining. For production environments seeking dependable face-milling performance from Teknik Makina, contact Metav Werkzeuge for tailored advice and a secure supply channel from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T681TM Label: 160mm Planmesserkopf PNHX 1105 L63mm Manufacturer: Teknik Makina Facts Diameter: 160 mm Cutting diameter (max): 165 mm Total length: 63 mm Weight: 3.715 kg Cutting edges: 14 Cutting angle: 60° Special features Compatible with PNHX 1105 indexable inserts Suitable for inserts by Palbit Torx key: T15 Torx screw: M4x10 ECLASS: 21181015 Product type: Face milling cutter head SKU identifier: T681TM FAQ What insert type does the cutter head use? The cutter head accepts PNHX 1105 indexable inserts; it is compatible with inserts supplied by Palbit for consistent seating and performance. How many cutting edges are available before indexation? The face mill is equipped with 14 cutting edges, extending time between indexations and reducing downtime for insert changes. Which fastening hardware is required for insert clamping? Insert clamping uses M4x10 Torx screws tightened with a Torx T15 key for secure and repeatable attachment. Is the head suitable for wide-face production machining? Yes — the 160 mm diameter (max 165 mm cutting) and robust construction make it suitable for efficient wide-face operations and high material-removal rates. What are the key dimensions to consider for machine clearance? Key dimensions include the 160 mm diameter, 63 mm total length and the unit weight of 3.715 kg, which should be checked against turret or arbor limitations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Face Milling Head for SNKX 1206 Indexable Inserts L63mm With Internal Coolant, 12 Inserts, 45° - Teknik Makina
Take advantage of robust construction, internal coolant and compatibility with SNKX 1206 indexable inserts to increase productivity and tool life; order the Teknik Makina face milling head directly via Metav Werkzeuge or request application advice from our consultants. Face milling head SNKX 1206 — 160 mm with internal coolant by Teknik Makina The face milling head for SNKX 1206 indexable inserts delivers rigid, high-performance face milling for industrial CNC operations with integrated coolant for improved chip control. 160 mm diameter with 12 cutting edges Internal coolant for improved chip evacuation Compatible with SNKX 1206 indexable inserts Robust construction, total length 63 mm and 5.38 kg Faster material removal with lower unit costs The combination of a 160 mm body and 12 cutting edges enables high feed rates while spreading wear across multiple cutting edges, which reduces cost per edge and extends service intervals. The 45° cutting angle lowers cutting forces and improves surface finish in face milling operations, allowing consistent removal rates without excessive spindle load. This balance of geometry and edge count is especially suitable for production runs where throughput and predictable tool life are primary concerns. Improved process reliability and temperature control Built-in internal coolant channels support stable cutting temperatures and efficient chip evacuation, which helps maintain edge integrity and reduces thermal distortion on the workpiece. Secure clamping with M4x12.5 Torx screws and a T15 Torx key ensures fast, repeatable insert changes and consistent seat contact. These features promote higher machine uptime and fewer unscheduled stops, delivering measurable benefits to productivity and shop-floor scheduling. Practical handling and maintenance that save time Insert changeover is straightforward thanks to the standardised fastening system; the Torx interface minimises cam-out and makes torque application reliable. The head’s robust construction and accessible screw positions shorten maintenance cycles and simplify inspection routines. Spare insert stock for the SNKX 1206 family is widely available, which keeps replacement times short and supports uninterrupted production. Suited for demanding industrial environments Engineered for industrial face milling, the head tolerates continuous operation in demanding machine-shop settings and integrates with standard toolholders for straightforward installation. Compatibility with Korloy SNKX 1206 indexable inserts ensures access to a broad range of grades and coatings to match specific materials and machining strategies. The result is a versatile solution that supports stable, repeatable results across a wide range of face-milling tasks. Contact Metav Werkzeuge for a detailed specification review of the Teknik Makina face milling head (SKU T334-1TM) and to discuss suitable inserts, machining parameters and delivery from our Emmerich stock — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T334-1TM Manufacturer: Teknik Makina eClass: 21181015 Label: 160mm face milling head SNKX 1206 L63mm with internal coolant Core data Diameter: 160 mm Max cutting diameter: 173 mm Total length: 63 mm Number of cutting edges: 12 Cutting angle: 45° Weight: 5.38 kg Special features Internal coolant Compatible with SNKX 1206 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M4x12.5 Torx key: T15 Product type: Face milling head FAQ Which indexable inserts fit this head? The face milling head accepts SNKX 1206 indexable inserts; Korloy SNKX 1206 inserts are specified for compatibility with the Teknik Makina head. Is internal coolant integrated? Yes. The Teknik Makina face milling head (SKU T334-1TM) features internal coolant to support chip evacuation and temperature control during heavy face-milling operations. What fastening hardware is required for insert changes? Insert retention uses M4x12.5 Torx screws tightened with a T15 Torx key to ensure reliable clamping and repeatable torque application. What production benefits can be expected from this head? With a 160 mm diameter and 12 cutting edges, the head supports higher material removal rates and lowers cost per cutting edge, improving throughput and predictability in batch production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Face Milling Head For SPKN 1203 Indexable Inserts 75° Cutting Angle, 40mm Shank - Teknik Makina
Benefit from a robust combination of large-diameter cutting capacity and compatible indexable insert support: the tool delivers steady stock removal with repeatable geometry and straightforward maintenance. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Face milling head T158TM — Ø160 mm, for SPKN 1203 indexable inserts by Teknik Makina The Face milling head T158TM is a heavy-duty cutter head designed for efficient face milling with SPKN 1203 indexable inserts, suited to production work where stability and repeatable cutting geometry are required Ø160 mm diameter for broad material engagement Compatible with SPKN 1203 indexable inserts 12 cutting edges for consistent material removal 40 mm shank diameter for secure mounting Improved material removal with a wide cutting diameter The large Ø160 mm diameter and the arrangement of 12 cutting edges allow higher material engagement per pass while maintaining a predictable chip flow. For production tooling this means fewer passes to reach the required plane, which raises throughput and reduces total machining time. Compatibility with SPKN 1203 inserts ensures simple procurement of cutting edges and reliable cutting performance across common facing tasks. Stable mounting reduces vibration and improves surface finish A 40 mm shank and compact overall length of 62 mm give the tool a low overhang and greater rigidity at the spindle, turning cutter dynamics into a measurable advantage. The 75° cutting angle contributes to a balanced cutting force vector that lowers chatter and promotes a consistent surface finish. These geometric factors combine to reduce rework and enhance part quality on medium‑ to heavy‑duty milling centres. Practical fastening and service features for fast maintenance Insert retention is secured with M8x24‑L fastening screws and a 5 mm Allen key is specified for adjustment, enabling quick insert changes and straightforward maintenance routines. The standardised fasteners and insert type allow predictable servicing intervals and minimise downtime in a busy production environment, which is essential for keeping cycle times tight on batch work. Mass and dimensions that support industrial workloads With a mass of 5.012 kg the cutter head provides inertial stability that helps dampen transient vibrations during interrupted cuts. The measured dimensions and balanced construction make it a dependable choice where machine-tool rigidity and repeatable positioning correlate directly with part tolerances and surface integrity. Designed for straightforward integration into existing tool setups The head is configured for use with common clamping and spindle interfaces and therefore integrates easily into established tool suites. Its specification focuses on pragmatic compatibility—indexable inserts that are widely stocked and a shank diameter that fits standard toolholders—so adaptations to current setups are minimal. Operational benefits that support production planning Selecting a robust cutter head with repeatable geometry and standardised inserts aids in process stabilisation: shorter set‑up times, fewer insert types to manage and a clear route to predictable cycle outputs. For production planners, that translates into improved capacity forecasting and reduced variance in finished parts. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina face milling head T158TM — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss suitability for specific materials and machining centres Technical Data Article number: T158TM Manufacturer: Teknik Makina Product: Face milling head for SPKN 1203 indexable inserts Diameter: 160 mm Facts Diameter: 160 mm Cutting edges: 12 Shank diameter: 40 mm Effective dimension (e): 66.7 mm Cutting angle: 75° Overall length: 62 mm Weight: 5.012 kg Features Suitable for SPKN 1203 indexable inserts Fastening screw: M8x24‑L Allen key size: 5 mm For face milling operations Brand: Teknik Makina FAQ Which insert type fits this milling head? The milling head accepts SPKN 1203 indexable inserts; the toolbody and insert geometry are matched for reliable seating and repeatable cutting performance. What is the shank diameter and why does it matter? The 40 mm shank provides a secure mounting interface that improves rigidity and reduces vibration compared with smaller‑diameter alternatives. How many cutting edges are available per revolution? The head is equipped with 12 cutting edges, arranged to provide steady material removal and consistent chip formation during face milling. What fastening hardware is required for insert replacement? Insert retention uses M8x24‑L screws tightened with a 5 mm Allen key, enabling quick and standardised maintenance. Is the head suitable for heavy interrupted cuts? The combination of mass (≈5.012 kg), short overhang and 75° cutting angle gives the head the rigidity and force distribution needed for many interrupted cutting scenarios in production. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Face Milling Head for XNMX 0606 Indexable Inserts L63mm With Internal Coolant - Teknik Makina
Take advantage of the combination of a wide 160 mm cutting diameter, internal coolant and compatibility with XNMX 0606 inserts for consistent face milling performance; order the head directly via Metav Werkzeuge or consult the specialists for application guidance. Planmesserkopf – Face milling head, 160 mm diameter, internal coolant (Teknik Makina) The Planmesserkopf is a 160 mm face milling head designed for heavy-duty and high-precision face milling with XNMX 0606 indexable inserts, featuring internal coolant and a compact 63 mm overall length for stable contact and efficient chip control. 160 mm cutting diameter for wide coverage Internal coolant for improved tool life Compatible with XNMX 0606 indexable inserts 16 cutting positions for consistent surface finish Increase throughput with a wide, stable cutting platform The 160 mm cutting diameter provides a broad machining envelope that reduces the number of passes required for face milling operations, delivering measurable productivity gains on large surfaces. With a robust cutting-angle geometry of 51°, the cutter head enables efficient chip formation while maintaining a smooth surface finish. The unit’s compact 63 mm overall length helps preserve rigidity at the tool tip, which translates into reduced vibration, extended insert life and a more reliable machining process. These technical characteristics are particularly relevant for milling centres and production shops seeking improved cycle times without compromising accuracy. Coolant-fed design that extends insert lifetime Integrated internal coolant channels supply cutting fluid directly to the cutting edge, improving lubrication and heat dissipation at the contact zone. This reduces thermal load on the carbide inserts and minimises built-up edge formation, which prolongs insert life and reduces unplanned tool changes. For operations where consistent finish and dimensional stability are crucial, the coolant-fed arrangement supports longer uninterrupted runs and reduces the frequency of quality-related rework. The cooling provision also aids in chip evacuation, which helps maintain surface integrity across longer workpieces. Fast set-up and broad insert compatibility for flexible production Engineered for XNMX 0606 indexable inserts and compatible with inserts from Korloy, the head simplifies tooling logistics by matching a widely available insert format used across many workshops. The head accepts Torx screws M4x12.5 with a T15 key, allowing straightforward insert clamping and rapid replacement during scheduled maintenance. The 40 mm mounting bore facilitates integration into a range of toolholders and arbors common in milling setups. Together, these features reduce machine downtime during tool changes and support flexible production planning across mixed batches. Reliable finish and consistent geometry for quality-driven work With 16 cutting positions distributed around the cutter body, the head provides multiple indexable edges before full replacement is required, contributing to stable surface quality over longer production runs. The combination of cutting geometry, coolant feed and secure clamping delivers a consistent machining profile that suits both large-scale facing and finishing passes. For shops prioritising repeatability and surface integrity, this face cutter offers a balance of performance and serviceability that supports a dependable production flow. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina face milling head into production and to request detailed technical guidance or compatibility checks; eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data SKU: T740TM Manufacturer: Teknik Makina Product type: Planmesserkopf Compatible inserts: XNMX 0606 Compatible insert manufacturer: Korloy Numbers / Core technical data Diameter: 160 mm Overall length: 63 mm Mounting bore (aufnahme_mm_d): 40 mm Cutting angle: 51° Cutting positions: 16 Torx key: T15 Torx screw: M4x12.5 eClass: 21181015 Special features / Versions Internal coolant For XNMX 0606 indexable inserts Suitable for face milling applications Compact design for enhanced rigidity FAQ Which inserts fit this face milling head? The Planmesserkopf is designed for XNMX 0606 indexable inserts and is declared compatible with inserts from Korloy. How does the internal coolant benefit machining performance? Internal coolant directs cutting fluid to the cutting zone, improving lubrication and cooling at the edge, which helps extend insert life and stabilise surface finish when using the Teknik Makina face milling head (SKU T740TM). What is the mounting size for this cutter? The cutter features a 40 mm mounting bore, which suits common arbors and toolholders for secure attachment. How many cutting positions are available before full tool reconditioning? This head offers 16 cutting positions, enabling several indexings to maintain cutting performance and postpone full replacement. Which screws and key are required for insert clamping? Insert clamping uses M4x12.5 Torx screws with a T15 key for secure and rapid insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Face Turning Tool Holder for SNKX 1206 and ONHX 0505 Indexable Inserts, 45° Cutting Angle, 40mm Shank - Teknik Makina
Take advantage of a robust combination of a 160 mm diameter and a 45° cutting angle for efficient, high-quality face milling with indexable inserts; the secure 40 mm shank and well-distributed 12 cutting edges reduce downtime and support consistent cycle times. Order via Metav Werkzeuge or consult the Metav team for specification support. Face milling head T628TM — 160 mm diameter, 45° cutting angle (Teknik Makina) Face milling head T628TM designed for high-output face and shoulder milling with indexable inserts SNKX 1206 and ONHX 0505 160 mm diameter for broad surface milling 45° cutting angle for smooth chip flow Compatible with SNKX 1206 and ONHX 0505 inserts 40 mm shank for secure spindle mounting 12 cutting edges for reduced machining time Greater productivity through optimised geometry The milling head is engineered around a 160 mm tool body and a 45° cutting angle, a combination that promotes efficient chip formation and a fine surface finish on each pass. With 12 cutting edges distributed around the circumference, the tool reduces the number of interruptions for indexing and provides longer effective cutting periods per tool change. For workshop planning this translates into measurable time savings on large-area finishing tasks while maintaining repeatable results. Fast insert changes and standardised clamping The device accepts SNKX 1206 and ONHX 0505 indexable inserts, including the ONHX 0505 Palbit alternative, enabling use of industry-standard grades for varied materials and workloads. Insert retention uses M4x10 Torx screws driven with a T15 key, so insert replacement is straightforward and reproducible. This standardised approach lowers maintenance complexity and keeps tooling costs predictable by relying on off-the-shelf inserts and fast, tool-room-friendly procedures. Secure mounting and workshop handling A 40 mm mounting bore ensures a firm interface with the spindle or arbor, supporting stable rotation and reliable concentricity across operations. The head’s mass of 4.577 kg and an overall length of 63 mm contribute to a compact yet substantial assembly that resists vibration during heavy passes. These attributes make the unit well suited to production environments where both stability and fast cycle times are required, and where easy handling in mounting and removal is a practical benefit. Practical advantages for production workflows The modular design and compatibility with common insert types enable rapid adaptation to different cutting conditions without the need for special holders. Using standard inserts helps control inventory and streamlines procurement. The combination of the head’s geometry and insert count supports consistent surface quality while reducing indexing frequency, which helps keep machine uptime high and throughput predictable — a clear rational benefit for job shops and in-house production teams aiming to improve OEE. Contact Metav Werkzeuge for a tailored specification or quotation on the Teknik Cutting Tools face milling head T628TM; assistance from the Emmerich team is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: T628TM Manufacturer: Teknik Makina Facts Diameter: 160 mm Cutting angle: 45° Cutting edges: 12 Shank / bore: 40 mm Weight: 4.577 kg Overall length: 63 mm Special features Compatible inserts: SNKX 1206, ONHX 0505 Alternative insert: ONHX 0505 Palbit Torx screw: M4x10 Torx key: T15 FAQ Is this head compatible with Palbit inserts? Yes. The T628TM accepts ONHX 0505 Palbit as an alternative, alongside the SNKX 1206 insert type specified for the face milling head. Which retaining screws and key are required for insert changes? Insert clamping on the milling head uses M4x10 Torx screws and a T15 Torx key for secure and repeatable retention. What is the mounting size for the tool? The face milling head features a 40 mm mounting bore for secure spindle or arbor attachment and stable machining performance. How heavy and compact is the head for handling during tool changes? The cutter head weighs 4.577 kg with an overall length of 63 mm, offering a compact footprint while providing the mass needed to reduce vibration in heavy cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm Turning Tool Holder for XOMX 1806 Indexable Inserts, 90° Cutting Angle, M4.5x11 Torx - Teknik Makina
Take advantage of a robust 90° cutting angle, a large Ø160 body and a secure 40 mm shank for stable, repeatable machining; order the angle head directly via Metav Werkzeuge or consult the technical team for integration advice. Angle head T527TM – 90° cutting angle, Ø160, for XOMX 1806 indexable inserts (Teknik Makina) The Angle Head T527TM is an indexable-insert holder engineered for precise shoulder cutting and face operations, designed to accept XOMX 1806 indexable inserts and to match SECO insert geometries for straightforward integration into existing tool sets. 90° cutting angle for precise shoulder cuts Ø160 body with 40 mm shank for secure mounting Compatible with XOMX 1806 inserts and SECO Stable 90° geometry for repeatable finishing The 90° cutting angle delivers consistent right‑angle cuts and is particularly suited to shoulder milling and finishing operations where perpendicularity matters. The squared cutting geometry reduces setup complexity and helps maintain machining tolerances, which translates into fewer reworks and improved batch consistency. As a purpose-built angle head, the unit supports stable cutting conditions and predictable tool engagement. Robust mounting and mechanical security A robust Ø160 mm body combined with a 40 mm shank ensures a secure mount in compatible toolholders and reduces vibration during high‑load passes. The assembly weight of 4.831 kg and a compact overall length of 62 mm provide a low centre of gravity that enhances stability. Clamping is effected with M4.5x11 Torx screws and a T15 key, enabling firm, repeatable fixation and easy on‑machine maintenance when inserts are changed. Designed for indexed insert systems and efficiency The head is configured for XOMX 1806 indexable inserts, allowing the use of economical multi‑edge insert formats; the holder accommodates 10 cutting edges, enabling frequent index changes without replacing the tool body. Compatibility with SECO insert geometries expands tooling options and simplifies spare‑part logistics, improving uptime and reducing inventory complexity for production lines. Operational benefits and serviceability Constructed for workshop resilience, the holder minimises downtime through straightforward insert replacement and standardised fastenings. The combination of a large diameter body and standardised shank reduces chatter and extends insert life, while the clear mechanical design supports predictable maintenance intervals and cleaner tool management on the shop floor. For integration planning or to source the Teknik Cutting Tools angle head T527TM with technical assistance and reliable supply from Emmerich, contact Metav Werkzeuge for personalised advice and prompt processing. Technical data Article number: T527TM Manufacturer: Teknik Makina Facts Diameter: 160 mm Shank/fixture diameter: 40 mm Weight: 4.831 kg Overall length: 62 mm Cutting angle: 90° Number of cutting edges: 10 Design & compatibility For XOMX 1806 indexable inserts Compatible with SECO insert formats Fastening: M4.5x11 Torx screw Torx key size: T15 Brand: Teknik Cutting Tools FAQ Is this angle head suitable for shoulder milling at right angles? The T527TM angle head is configured with a 90° cutting angle specifically to produce precise shoulder and perpendicular cuts in machining operations. Which inserts fit this holder? This holder accepts XOMX 1806 indexable inserts and is compatible with SECO insert geometries, allowing use of standard indexed inserts. What fastening hardware is used for insert clamping? Insert clamping and component fixation use M4.5x11 Torx screws; a T15 Torx key is required for secure tightening. How does the Ø160 body affect machining stability? The Ø160 mm body increases stiffness and reduces vibration, which helps improve surface finish and prolong insert life during heavy or interrupted cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Boring Tool Holder 90° Indexable Head for TPKN 1603-2204 Indexable Inserts, 8 Cutting Edges, 60mm Shank - Teknik Makina
Take advantage of a stable 200 mm diameter toolhead with a 90° cutting angle and compatibility with TPKN 1603–2204 indexable inserts for predictable chip control and surface finish; the robust 60 mm arbor and M8x24 fastening provide secure mounting and reduced downtime. Order the corner milling head directly via Metav Werkzeuge or ask our consultants if needed. Corner milling head (T136TM) — for TPKN 1603–2204 indexable inserts, Ø200 mm, 90° cutting angle (Teknik Makina) Corner milling head (T136TM) for precision corner and face milling with indexable inserts, engineered for stable engagement in medium to heavy milling applications 200 mm diameter for heavy-duty cutting Accepts TPKN 1603–2204 indexable inserts 90° cutting angle for precise corner machining 60 mm arbor for secure toolholder connection Stable machining with a 90° cutting geometry The head is designed to deliver consistent results thanks to its 90° cutting angle and large Ø200 mm diameter, which together increase contact stability and reduce chatter during engagement. With eight cutting edges, the assembly balances chip removal and load distribution, yielding improved surface finish and longer insert life. The mass of the head contributes to vibration damping while the robust construction supports repeatable machining tolerances in serial production. Broad compatibility streamlines tool inventories Compatibility with TPKN 1603–2204 indexable inserts simplifies tool management by allowing standardised insert types across multiple toolholders. Indexable inserts provide a cost-effective way to restore cutting performance: worn edges are replaced instantly without regrinding, which shortens setup time and maintains machining quality. The modular approach reduces stock complexity and supports quick changeovers on multi-shift shop floors. Secure clamping and maintenance-friendly assembly A 60 mm arbor interface and M8x24 fastening screw ensure a rigid connection to the machine spindle or adapter, while the supplied 5 mm Allen key specification makes routine maintenance straightforward. The compact overall length and the head’s weight of 5.458 kg aid in stable cutting dynamics without excessive overhang. These characteristics combine to offer a dependable toolholder that minimises unplanned stoppages and supports efficient workshop throughput. Contact Metav Werkzeuge today for procurement and technical advice on the Teknik Makina T136TM corner milling head; call +49 2822 7131930 or email info@metav-werkzeuge.com for delivery from Emmerich and customised recommendations. Technical data Article number: T136TM Manufacturer: Teknik Makina Designation: Eckmesserkopf For indexable inserts: TPKN 1603–2204 Facts Diameter: 200 mm Arbor diameter: 60 mm Cutting angle: 90° Number of cutting edges: 8 Overall length: 62 mm Weight: 5.458 kg e dimension: 101.6 mm Screw: M8x24 Allen key: 5 mm Special features Accepts TPKN 2204 indexable inserts Suited for TPKN 1603–2204 inserts Robust construction for milling operations FAQ Is the head compatible with other insert sizes? The corner milling head accepts TPKN 1603–2204 indexable inserts as specified; alternative insert sizes are not listed for this model. What arbor diameter is required for mounting? Mounting requires a 60 mm arbor connection; use the corresponding adaptor or spindle seat for secure installation. How many cutting edges does the toolhead provide? The toolhead is supplied with eight cutting edges, optimised to balance material removal and tool life. Which fastening hardware is used for insert clamping? The assembly uses M8x24 fastening screws and specifies a 5 mm Allen key for tightening and maintenance. What are the key benefits in a production environment? The combination of Ø200 mm diameter, 90° geometry and compatibility with standard TPKN inserts provides stable machining, predictable insert life and faster servicing between shifts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Corner Tool Head for WNMU 0806 Indexable Inserts L63mm, 90° Cutting Angle - Teknik Makina
Benefit from the combination of a robust 200 mm diameter, compatibility with WNMU 0806 indexable inserts and a compact 63 mm overall length to improve stability and throughput on the lathe; order the tool head directly via Metav Werkzeuge or consult our experts for application-specific advice. Corner tool head – 200 mm diameter, for WNMU 0806 indexable inserts (Teknik Makina) Corner tool head for heavy-duty turning applications, designed to accept WNMU 0806 indexable inserts and deliver stable corner machining in industrial CNC environments. *200 mm diameter for rigidity and stability *Compatible with WNMU 0806 indexable inserts (Kyocera) *Overall length 63 mm for compact set-ups *14 cutting edges for extended productivity *90° cutting angle for precise corner machining Greater productivity through stable geometry and multiple cutting edges The large 200 mm diameter body increases moment of inertia, reducing vibration during corner cuts and improving surface finish consistency. With 14 cutting edges distributed for indexing, the head minimises downtime for insert changes and raises effective output per tool set. The 90° cutting angle supports accurate shoulder and corner operations, translating tool geometry into repeatable part quality. These measurable advantages make the component a reliable choice where cycle time and finish are critical. Proven compatibility and straightforward tool management Designed for use with WNMU 0806 indexable inserts, the head accepts inserts from Kyocera, simplifying sourcing and inventory management for production shops. The compact 63 mm overall length allows integration into tighter turret setups without sacrificing rigidity. Fast replacement is facilitated by standard fastenings, so ordering inserts and spares follows established procurement channels; this contributes directly to lower process complexity and predictable uptime for machine shops. Installation, serviceability and operational safety Assembly and maintenance are intentionally simple: fixing is performed with Torx screws and requires a T20 key for secure clamping, using M5x12 screws supplied with the unit. The substantial mass of 8.302 kg contributes to a stable centre of gravity during machining, while standardised screw sizes and insert formats reduce the need for special tooling inventories. Routine checks focus on clamping torque and insert condition; following these short procedures ensures sustained cutting performance and long tool life. For procurement guidance or to specify the Teknik Makina corner tool head for your machine, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply arrangements Technical Data Article number: T549TM Manufacturer: Teknik Makina Label: 200mm Eckmesserkopf WNMU 0806 L63mm Product type: Corner tool head Facts Diameter: 200 mm Overall length: 63 mm Weight: 8.302 kg Cutting edges: 14 Cutting angle: 90° Screw size: M5x12 Special features Compatible with WNMU 0806 indexable inserts Insert manufacturer compatibility: Kyocera Torx key required: T20 SKU: T549TM ECLASS: 21181015 FAQ Which insert type does this tool head accept? The corner tool head accepts WNMU 0806 indexable inserts; compatibility with Kyocera inserts is specified for consistent performance. What are the key dimensions to check for turret fitment? Check the 200 mm diameter and 63 mm overall length to ensure compatibility with the machine turret and adjacent tooling. How many indexing positions or cutting edges are available? The tool head provides 14 cutting edges, allowing extended runtime between insert replacements and higher production continuity. What fastening hardware does the unit use? Assembly uses M5x12 Torx screws tightened with a T20 key for secure clamping and straightforward service procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Corner Tool Holder For TPKN 1603-2204 Indexable Inserts, 90° Cutting Angle, M8x24 Clamp - Teknik Makina
Take advantage of a robust, indexable solution that combines precise clamping, clear compatibility with TPKN inserts and a compact 60 mm shank for reliable turning operations. Benefit from a consistent 90° cutting angle and a durable TA012 clamping plate for repeatable machining results — order directly via Metav Werkzeuge or contact the consultants for application advice. Corner turning head T112TM — indexable insert holder with 90° cutting angle, Teknik Cutting Tools The Corner turning head T112TM offers a compact, toolholder-style solution for edge and shoulder turning with indexable inserts designed for industrial CNC applications Compatible with TPKN 1603–2204 inserts 60 mm shank diameter for secure mounting 90° cutting angle for accurate shoulder work TA012 clamping plate and M8x24 lock screw Secure clamping that improves process reliability The toolholder is built around a 60 mm shank diameter which provides stable mounting in standard tool turrets and reduces vibration during heavy cuts. The integrated TA012 clamping plate and M8x24 lock screw allow consistent positioning of the insert, so set-up deviations are minimised and cycle-to-cycle repeatability improves. For shops transitioning from conventional holders, the robust clamping leads to fewer repositions and measurable gains in first-pass yield. Clear compatibility and simple assembly Designed for indexable inserts, the head accepts the TPKN 2204 family (and related 1603–2204 sizes), making it straightforward to match insert geometry and grade to the workpiece. Assembly uses a M4x10 hex screw secured with a 5 Allen key, enabling quick replacement of inserts and routine maintenance without specialised tooling. The straightforward interface reduces downtime and simplifies spare-part logistics for production environments. Engineered dimensions for consistent cutting performance With an effective diameter of 200 mm and eight cutting edges, the component distributes cutting forces evenly while maintaining a compact footprint (overall length 62 mm). A defined 90° cutting angle ensures accurate shoulder faces and perpendicularity, reducing the need for secondary finishing. The head’s mass (approximately 5.412 kg) contributes to inertia damping, which supports smoother chip formation and helps extend insert life under steady cutting conditions. Practical benefits for workshop productivity This holder focuses on repeatable set-up and predictable results: fewer adjustments, reduced scrap rates and more stable tool life. The modular compatibility with common TPKN indexable inserts allows shops to leverage existing insert inventories while upgrading holder rigidity. For operations aiming to standardise tooling across a machine fleet, this solution supports consistent process parameters and simplifies operator training. For procurement support or application-specific advice on Teknik Cutting Tools’ corner turning heads, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com — for reliable supply and expert guidance Technical data Article number: T112TM Manufacturer: Teknik Makina ECLASS: 21181015 Name (EN): Corner turning head for TPKN 1603–2204 indexable inserts Core data Effective length (e_mm): 101.6 Shank diameter (d): 60 mm Weight: 5.412 kg Diameter: 200 mm Cutting edges: 8 Overall length: 62 mm Cutting angle: 90° Special features Compatible with TPKN 1603–2204 indexable inserts Lock screw: M8x24 Clamping plate: TA012 Hex screw: M4x10 Allen key size: 5 FAQ What inserts fit this toolholder? The corner turning head T112TM is designed for TPKN 1603–2204 indexable inserts; matching the insert grade to the workpiece material ensures optimal tool life. How is the insert secured in the holder? Insert clamping is achieved via the TA012 clamping plate and an M8x24 lock screw, with the M4x10 hex screw used for auxiliary fixation where applicable. Can the holder be mounted in standard turrets? Yes — the 60 mm shank diameter provides a stable interface for compatible turret systems and reduces radial runout during turning. Is this head suitable for heavy shoulder cuts? The combination of the 90° cutting angle, robust clamping and the head’s mass (approx. 5.412 kg) makes it suitable for demanding shoulder and edge-turning operations when paired with the correct insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Corner Turning Head for XNEX 0806 Indexable Inserts, 90° Cut Angle, 14 Cutting Edges, 63mm Overall Length - Teknik Makina
Take advantage of a robust 90° cutting geometry combined with a 60 mm holder diameter and Ø200 mm body to achieve stable shoulder machining and reliable insert changes; order the item directly via Metav Werkzeuge or consult our experts for specification support. Corner tool head T851TM — Corner cutting head, 90° geometry, Ø200 mm (Teknik Makina) Corner tool head T851TM is a precision turning head for shoulder and profiling operations using XNEX 0806 indexable inserts Corner tool head T851TM by Teknik Makina Compatible with XNEX 0806 indexable inserts 90° cutting angle for precise shoulder cuts 60 mm holder diameter with Ø200 mm body Consistent 90° shoulder machining for repeatable components The robust design delivers a 90° cutting geometry that stabilises load direction during shoulder turning, which reduces vibration and produces consistent faces and shoulders. With a solid-body diameter of Ø200 mm and an optimised mass distribution, the assembly maintains cutting stability even under interrupted cuts. This results in improved repeatability part after part and decreases the need for corrective finishing, benefiting production runs that demand tight tolerances. Fast insert changes and broad compatibility to cut downtime Designed for use with XNEX 0806 indexable inserts, the head accepts inserts from established manufacturers such as SECO and WINSTAR, enabling flexible tool sourcing and quick adaptation to existing tooling inventories. Insert fixation uses a Torx M4x12.5 screw with a T15 key, permitting secure clamping with straightforward service routines. The simplified interchange workflow shortens set-up times and contributes directly to higher machine availability and throughput. Stable holder and mass for heavy-duty cutting stability The tool holder features a 60 mm holder diameter that interfaces with standard heavy-duty turrets and toolposts, providing a secure clamping interface and improved resistance to bending moments. Weighing in at 6.415 kg, the unit’s inertia aids in dampening cutting forces and helps to preserve insert life and surface finish. The combination of a solid Ø200 mm body and a compact overall length improves accessibility at the machining zone while preserving the rigidity needed for medium to heavy cuts in a variety of workshop and production environments. For tailored advice on the Teknik Makina corner tool head T851TM, and to secure reliable supply from Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T851TM Product: Corner tool head (Eckmesserkopf) Manufacturer: Teknik Makina Application: for XNEX 0806 indexable inserts Compatible insert manufacturers: SECO, WINSTAR Torx screw: M4x12.5 Torx key: T15 Facts Weight: 6.415 kg Body diameter: 200 mm Holder diameter: 60 mm Overall length: 63 mm Cutting edges: 14 Cutting angle: 90° Special features Compatible with XNEX 0806 indexable inserts Suitable for inserts from SECO and WINSTAR Designed for shoulder and profiling operations Brand: Teknik Makina FAQ Which inserts fit this tool head? The corner tool head accepts XNEX 0806 indexable inserts; compatible suppliers listed for the head include SECO and WINSTAR. What is the cutting angle and why does it matter? A 90° cutting angle is specified to deliver square shoulder cuts and stable force distribution, improving surface finish and repeatability in shoulder machining. How is the insert secured in the head? Inserts are clamped using a Torx M4x12.5 screw; the corresponding Torx key size is T15, ensuring a secure and serviceable fixation. What holder size does this head require? The head uses a 60 mm holder diameter, suitable for heavy-duty turrets and toolposts that provide enhanced rigidity. Is this product suitable for production shops or jobbing work? The construction and mass of the head, combined with its compatibility with established insert systems, make it appropriate for both production runs and robust jobbing work where stability and quick insert changes are valued. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Face Cutter For SPKN 1203 Indexable Inserts 75° Cutting Angle, 101.6mm Shank - Teknik Makina
Take advantage of a robust head designed for consistent face-milling performance: the combination of a 200 mm diameter, security-focused 60 mm mounting and compatibility with SPKN 1203 indexable inserts supports high material removal and predictable process stability. Order the T160TM directly via Metav Werkzeuge or consult their specialists for technical guidance. Planing cutter head T160TM — 200 mm diameter, for SPKN 1203 indexable inserts (Teknik Makina) The planing cutter head is a purpose-built milling head for face milling and planing operations, compatible with SPKN 1203 indexable inserts and intended for industrial production environments 200 mm diameter for wide-area machining Holds SPKN 1203 indexable inserts 12 cutting edges for high material removal 60 mm bore with secure M8 clamping screw Increased productivity through optimised cutting geometry The head is engineered to deliver reliable stock removal with an emphasis on steady cycle times. With a 200 mm diameter and 12 cutting edges, the design spreads cutting forces and reduces load per tooth, which results in smoother engagement and extended insert life. The 75° cutting angle reduces axial forces and supports stable toolpaths, enabling higher feed rates without compromising surface quality. This configuration is particularly effective for batch production where reduced downtime and predictable tool change intervals increase throughput. Fast tool changes and clear mounting interface Maintenance and insert replacement are simplified by a standardised mounting arrangement and accessible clamping hardware. The 60 mm mounting bore combined with a dedicated M8x24-L clamping screw and a 5 mm Allen key enables secure fastening and quick service intervals. The straightforward interface minimises set-up time on the machine spindle and reduces the risk of incorrect assembly; the available hardware specification supports repeatable seating and torque application, which preserves concentricity and balance during operation. Robust construction for consistent performance Built for workshop and shop-floor conditions, the head’s mass supports vibration damping and steadier cutting action; the unit weight of 6.542 kg contributes to inertial stability during heavy cuts. The overall length of 62 mm ensures a compact centre of gravity, aiding rigidity when mounted on typical toolholders. These mechanical characteristics translate into uniform chip formation and comparable surface roughness across long production runs, so finish and dimensional control are improved without adding complexity to machining parameters. Practical applications and machining benefits This head is intended for face-milling, planing and broad-surface skimming tasks where indexable inserts provide economical cutting performance. Compatibility with SPKN 1203 indexable inserts allows combination with established insert grades for steel, alloyed steel and cast materials, offering flexibility across workpiece types. The design supports predictable tool life and straightforward repurposing for different insert geometries, which is an economical route to maintain process capability while keeping inventory management simple. Contact Metav Werkzeuge in Emmerich for tailored technical advice and reliable supply of the T160TM planing cutter head; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: T160TM Designation: planing cutter head for SPKN 1203 indexable inserts Manufacturer: Teknik Makina Core data Diameter: 200 mm Mounting bore: 60 mm Total length: 62 mm Weight: 6.542 kg Cutting angle: 75° Cutting edges: 12 Special features Compatible with SPKN 1203 inserts Clamping screw: M8x24-L Allen key size: 5 mm SKU: T160TM FAQ What insert type fits this cutter head? The cutter head accepts SPKN 1203 indexable inserts; the geometry is configured for these inserts to ensure correct seating and reliable cutting performance. What is the required mounting interface? A 60 mm mounting bore is specified for the head; use the recommended holder and tighten the M8x24-L clamping screw with a 5 mm Allen key for secure attachment. How many cutting edges are available and what does that mean? The head carries 12 cutting edges, which distributes cutting forces and reduces the load per insert, improving surface finish and extending insert life under continuous operation. Is the head suitable for heavy stock removal? Yes. The combination of a 200 mm diameter, 75° cutting angle and substantial mass supports stable heavy cuts while maintaining surface consistency. What length and balance considerations should be noted? The overall length is 62 mm; the compact profile and weight of 6.542 kg aid rigidity and balance when mounted correctly on a compatible spindle. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Face Milling Head for SNKX 1206 Indexable Inserts 45° Cutting Angle, M4x12.5 Torx T15 - Teknik Makina
Take advantage of robust cutting performance and quick insert changes thanks to the combination of a large effective diameter and multiple cutting edges; the result is steady material removal and reduced cycle times. For machine compatibility, note the 60 mm bore and manageable 6.69 kg mass. Order the planing cutter head directly via Metav Werkzeuge or ask the consultants for application advice. Planing cutter head T335TM — 200 mm diameter, 14 cutting edges (Teknik Makina) The Planing cutter head T335TM is a heavy‑duty face milling solution designed for SNKX 1206 indexable inserts and industry‑grade turning and milling operations. 200 mm body diameter for broad coverage 14 indexed cutting edges for continuous cutting Compatible with SNKX 1206 indexable inserts M4 x 12.5 Torx screws; T15 key required High throughput from a large, stable cutting platform This milling head delivers consistent material removal by combining a 200 mm body diameter with an effective cutting diameter of 213 mm, enabling wider cuts per pass and fewer tool changes. The multiplicity of 14 cutting edges spreads the cutting load, reducing vibration and improving surface quality. For production environments seeking measurable productivity gains, the configuration supports faster cycle times and predictable tool life, which helps to plan tool-change intervals and reduce unplanned downtime. Simple service and machine compatibility to keep lines running Maintenance and insert replacement are straightforward: the head secures inserts designed for the SNKX 1206 designation and uses M4 x 12.5 Torx screws tightened with a T15 key, allowing fast, repeatable clamping. The 60 mm bore ensures compatibility with many standard arbor systems, while the unit mass of 6.69 kg influences handling and balancing procedures — relevant when checking spindle load and set‑up times. Clear specifications make it easier to verify machine suitability before purchase and to plan changeover workflows. Versatile in application with an optimised cutting geometry The head uses a 45° cutting angle, which balances axial and radial forces to provide a compromise between material removal rate and surface finish. That geometry is well suited to a range of milling tasks, from semi‑roughing to finishing passes, where controlled chip evacuation and consistent tool engagement matter. Where different insert makers are preferred, compatibility with suppliers such as Böhlerit, Korloy and Palbit gives flexibility in selecting grades that match workpiece material and cutting conditions. Metav’s product selection aims to make precise tooling accessible for both workshop and industrial settings. Contact Metav Werkzeuge for tailored technical advice and supply of the Teknik Makina T335TM planing cutter head; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss machine compatibility and delivery options Technical Data Article number: T335TM Manufacturer: Teknik Makina Product: Planing cutter head for SNKX 1206 indexable inserts Facts Body diameter: 200 mm Maximum cutting diameter: 213 mm Shank / bore diameter: 60 mm Weight: 6.69 kg Number of cutting edges: 14 Overall length: 63 mm Cutting angle: 45° Torx screws: M4 x 12.5 mm Torx key: T15 Special features Compatible insert type: SNKX 1206 Compatible insert manufacturers: Böhlerit, Korloy, Palbit SKU: T335TM eClass: 21181015 FAQ Which insert type does this cutter head accept? The head accepts SNKX 1206 indexable inserts; compatible suppliers include Böhlerit, Korloy and Palbit. What are the key dimensions to check for machine compatibility? Verify the 60 mm bore and the overall mass of 6.69 kg, plus the maximum cutting diameter of 213 mm, to confirm spindle and arbor compatibility for the T335TM. How many cutting edges are fitted to the head? The tool is configured with 14 cutting edges, which support continuous cutting and reduced vibration during milling. Which fasteners are used for the inserts and what tool is required? Inserts are secured with M4 x 12.5 Torx screws and require a T15 key for tightening and removal. What cutting geometry does the head use and why is that beneficial? The head has a 45° cutting angle, offering a balance between material removal rate and surface finish for a range of milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Face Turning Tool Head For APKT 1604 Indexable Inserts, 90° Cutting Angle, M4x10 Clamp - Teknik Makina
Take advantage of a robust 90° turning solution that combines precise square-shoulder performance with straightforward insert compatibility; the rigid 60 mm shank and secure Torx fastening reduce setup time and improve process stability. Order the component directly via Metav Werkzeuge or consult our specialists for a tailored quotation and machining advice. Eckmesserkopf T193TM — 90° corner turning head for APKT 1604 indexable inserts by Teknik Makina A versatile 90° corner turning head, the Eckmesserkopf T193TM is designed for external turning and shoulder work with APKT 1604 indexable inserts, suited to heavy‑duty workshop environments Compatible with APKT 1604 inserts 90° cutting angle for square shoulders 60 mm shank diameter, rigid mounting Torx M4x10 screw with T15 key Engineered for accurate square-shoulder machining The turning head delivers a 90° cutting angle that simplifies shoulder and contour machining while maintaining consistent edge engagement. The geometry is optimised so that each indexed insert sits precisely in the pocket, allowing the tool to create true square shoulders without repeated adjustments. This stability translates into measurable reductions in rework and fixture time, ensuring the machining process is both dependable and predictable for batch production and single-part runs. Fast, secure insert changes for uninterrupted production Compatibility with APKT 1604 indexable inserts and Korloy standards enables quick insert replacement and wide availability of cutting grades. Fixing is via an M4x10 Torx screw operated with a T15 key, a familiar fastening standard in industrial tooling that supports controlled torque application and reduced risk of slip. The combination of standardised inserts and positive clamping supports fast changeovers, keeping machine downtime to a minimum and improving overall throughput. Robust design that reduces vibration and extends tool life A solid construction with a 60 mm shank diameter and substantial mass (approx. 6.37 kg) delivers enhanced rigidity at the toolholder interface. The increased stiffness helps dampen chatter and maintain cutting stability under load, which preserves insert life and supports superior surface finish. For workshops seeking consistent quality across varied batches, this turning head offers the mechanical stability required for repeatable results in turning operations. Integration and maintenance made straightforward The head’s nominal cutter diameter and compact overall length simplify integration into existing turret and toolpost arrangements without extensive modifications. Routine maintenance focuses on checking the M4x10 fastening and ensuring insert seats are free from chips and coolant residue; this straightforward service routine keeps the tool in peak condition and avoids unexpected interruptions. The component is supplied as SKU T193TM, making reorders and stock management unambiguous for procurement teams. For dedicated technical guidance or a tailored quotation for the Teknik Makina T193TM 90° corner turning head, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T193TM Name: Eckmesserkopf Type: Turning head for APKT 1604 indexable inserts Manufacturer: Teknik Makina ECLASS: 21181015 Numbers / Core technical data Shank diameter: 60 mm Weight: 6.37 kg Overall length: 63 mm Cutter diameter: 200 mm Cutting edges: 12 Cutting angle: 90° Designs / Special features Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 Files: 62de7efa148ec6b71020ffcf, 62de7dc60aced56449540e7c FAQ Which indexable inserts fit this turning head? The T193TM is designed for APKT 1604 indexable inserts; Korloy APKT 1604 grades are directly compatible. What are the main mounting dimensions to check before fitting? Check for a 60 mm shank diameter and ensure turret or holder accepts a 63 mm overall length profile for correct integration. Is the tool suitable for heavy machining and long runs? Yes. With a substantial mass of 6.37 kg and a rigid 60 mm shank, the turning head is built for stable machining in extended production sequences. Which fastening hardware is required for insert retention? Insert retention uses an M4x10 Torx screw tightened with a T15 key to secure each APKT 1604 insert. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Planer Tool Head For SNKX 1606 And ONHX 0606 Indexable Inserts, 45° Cutting Angle, M5x12 Torx Screw - Teknik Makina
Take advantage of a wide Ø200 mm cutting diameter, 12 cutting edges and a secure M5x12 Torx clamping system for efficient face milling; order directly via Metav Werkzeuge or consult the technical team for tailored configuration. Planing cutter head (T634TM) – face milling head Ø200 mm, 12 cutting edges by Teknik Makina Planing cutter head for robust face milling applications; compatible with SNKX 1606 and ONHX 0606 indexable inserts for versatile production use Ø 200 mm diameter for wide coverage 12 cutting edges for consistent material removal M5x12 Torx clamping with T20 key Faster stock removal with a large diameter and optimised cutting angle The large Ø200 mm cutting diameter combined with a 45° cutting angle allows the cutter to cover more surface per pass while maintaining predictable cutting forces. This configuration reduces the number of passes required on planar surfaces, which improves cycle times and steady-state throughput. The head’s mass—8.112 kg—and its 60 mm mounting diameter help deliver the rigidity expected in heavy-duty face milling, so the tool sustains chatter resistance and provides a stable basis for high-volume production runs. Reliable clamping and straightforward maintenance for minimal downtime A secure clamping arrangement is provided via the supplied M5x12 Torx screw and matching T20 key, ensuring each indexable insert seats firmly during operation. The head accepts SNKX 1606 inserts as standard and is also compatible with ONHX 0606 inserts from Palbit, enabling rapid index changes and predictable regrind cycles. Fewer adjustments are required thanks to the systematic insert geometry and the robust fastening hardware, which together lower maintenance times and support continuous operation in mixed-shop environments. Compatibility that simplifies tooling decisions and inventory Designed for systems using indexable inserts, the milling head supports common industry insert formats—SNKX 1606 and the ONHX 0606 variant—so existing insert stocks can be used without a complete retool. The cutter’s 63 mm overall length and standard 60 mm mounting diameter make it straightforward to integrate into compatible toolholders and turret setups. As a result, purchasing this face milling solution reduces tooling complexity and helps centralise inventory around widely used insert types from established vendors. For robust face milling solutions from Teknik Cutting Tools, contact Metav Werkzeuge to discuss configuration options or to arrange a specification review by phone +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical Data Article number: T634TM Manufacturer: Teknik Makina Product name: Planing cutter head Brand: Teknik Cutting Tools Facts Diameter: 200 mm Cutting edges: 12 Overall length: 63 mm Weight: 8.112 kg Mounting diameter: 60 mm Cutting angle: 45° Special features Compatible inserts: SNKX 1606 Alternative inserts: ONHX 0606 (Palbit) Torx screw: M5x12 Torx key size: T20 Suitable for indexable-insert face milling FAQ Which indexable inserts fit this cutter head? The Planing cutter head accepts SNKX 1606 inserts and is also compatible with ONHX 0606 inserts from Palbit, allowing use of standard indexable inserts for face milling. What is the mounting diameter required for installation? The cutter head requires a 60 mm mounting diameter, matching common heavy-duty toolholders for secure attachment. How many cutting edges are mounted on the head? The head is equipped to carry 12 cutting edges, which promotes even wear distribution and smoother cutting action across the face. What fasteners are used for insert clamping? Insert clamping is secured with an M5x12 Torx screw tightened with a T20 key, providing reliable fixation for production conditions. Is the tool suitable for high-volume production runs? With its Ø200 mm diameter, 12 cutting edges and robust construction, the face milling solution is designed to support continuous, high-throughput machining environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Corner Turning Head for TPKN 1603–2204 Indexable Inserts, 90° Cut Angle, M8x24 Fastening - Teknik Makina
Take advantage of a robust 90° cutting configuration combined with a Ø250 mm head and secure 60 mm shank — designed for stable machining with TPKN indexable inserts; order directly via Metav Werkzeuge or consult the Metav specialists for application advice. Eckmesserkopf — corner tool head by Teknik Makina, 90° cutting angle, for TPKN 1603-2204 indexable inserts Eckmesserkopf is a compact corner tool head optimised for right-angle cutting and heavy-duty indexable insert applications, suitable for workshop and production environments where predictable chip control and straightforward insert changes are required. 90° cutting angle for consistent shoulder cuts Compatible with TPKN 2204 indexable inserts Ø250 mm head for stable machining 60 mm shank for secure clamping Reliable 90° geometry for predictable results The right-angle design provides a 90° cutting angle that simplifies set-up and guarantees reproducible shoulder and face cuts. The solid Ø250 mm head mass contributes to reduced vibration and improved surface finish during interrupted cuts, while the arrangement for TPKN 2204 inserts ensures straightforward availability of cutting edges. This geometry is especially advantageous where repeatability and short cycle times are priorities, because the design reduces rework and streamlines toolpath planning. Secure clamping and quick insert changes A substantial 60 mm shank and a precise mounting interface with E = 101.6 mm support a rigid connection to the turret or toolpost, reducing deflection under load and extending insert life. Retention is achieved with a socket-head screw M8x24, tightened with an Allen 5 key for reliable fixation. The head accepts standard TPKN indexable inserts, which allows simple rotation or replacement of cutting edges and keeps downtime to a minimum — a practical benefit in mixed-production shops. Engineered for workshop durability and serviceability With a practical overall length of 62 mm and a mass of 8.235 kg, the unit balances rigidity and compact handling for frequent tool changes. The head accommodates 9 cutting edges, offering multiple indexing options before replacement, which supports longer intervals between consumable purchases. Constructed for everyday industrial use, the design reduces the need for special fixtures and aligns with conventional toolholding systems, promoting straightforward integration and predictable maintenance cycles. Contact Metav Werkzeuge to discuss Teknik Makina corner tool heads and secure delivery from our Emmerich warehouse — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and availability Technical data Article number: T138TM SKU: T138TM Product name: Corner tool head Compatible inserts: for TPKN 1603-2204 Indexable Inserts Brand: Teknik Makina Facts E (mm): 101.6 Shank diameter (mm): 60 Head diameter (mm): 250 Overall length (mm): 62 Weight (kg): 8.235 Cutting angle: 90° Number of cutting edges: 9 Socket-head screw: M8x24 Allen key size: 5 mm Special features Compatible with TPKN 2204 Right-angle / corner design Indexable insert system Robust construction for workshop use FAQ What inserts fit this corner tool head? The Eckmesserkopf is designed for TPKN 1603–2204 indexable inserts and accepts standard TPKN 2204 sizes for straightforward replacement and indexing. Is the shank suitable for standard turrets? Yes, the head features a 60 mm shank diameter and a defined mounting length (E = 101.6 mm) to integrate with common turret and toolpost systems used in industrial lathes and machining centres. How is the insert secured and changed? Inserts are secured on the head and clamped using the provided socket-head screw M8x24; tightening and loosening is performed with an Allen 5 key to allow quick insert indexing. Does the head support heavy interrupted cuts? The Ø250 mm head mass and rigid shank connection give improved damping and stiffness, which helps maintain stability under interrupted or heavy cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
300mm Corner Turning Head For APKT 1604 Indexable Inserts, 90° Cutting Angle, M4x10 Screw - Teknik Makina
Take advantage of a stable 60 mm mounting and a true 90° cutting angle to achieve consistent corner finishes, while the APKT 1604 compatibility reduces tooling complexity and inventory. Order or request application advice directly from Metav Werkzeuge for seamless integration into production. Corner turning head – Teknik Makina (for APKT 1604 indexable inserts, 60 mm mounting) Corner turning head designed for 90° corner turning operations, accepting APKT 1604 indexable inserts and built for rigid 60 mm mounting in heavy‑duty tool turrets. Robust 60 mm mounting diameter Compatible with APKT 1604 inserts 90° cutting angle for precise cornering Torx M4x10 fixing, T15 key required Consistent 90° corner turning for repeatable parts The 90° design delivers a defined cutting geometry that simplifies set‑up and reduces trial cuts. With its 90° cutting angle and purpose‑built geometry, the head produces repeatable corner profiles, lowering scrap rates and minimising downstream rework. This precise orientation is particularly beneficial for batch production where consistent tolerances are required; the fixed cutting geometry means fewer alignment checks and faster cycle‑time stabilisation. Rigid mounting and mass for vibration damping Engineered with a 60 mm mounting diameter, the assembly provides mechanical stability and improved vibration damping during heavy cutting. The substantial 14.36 kg mass contributes to dynamic rigidity on the turret, which helps to extend insert life and maintain surface finish. These characteristics translate into longer uninterrupted runs and reduced tool change frequency, supporting higher overall machine utilisation on critical turning operations. Fast, secure insert retention to reduce downtime Insert changes are secured by an M4x10 Torx screw requiring a T15 key, offering a simple and robust clamping method familiar to most workshops. Compatibility with APKT 1604 indexable inserts means stocked inserts from common suppliers such as Korloy can be used directly, cutting logistics complexity. The secure fastener arrangement ensures reliable clamping force and straightforward serviceability, which shortens maintenance intervals and helps maintain production continuity. Designed dimensions for flexible integration and productivity With a 300 mm diameter interface and 62 mm overall length, the head balances reach and compactness for tight turning applications. The configuration includes 15 cutting edges, enabling economical use of indexable inserts by maximising available cutting positions before replacement. The geometry and dimensions support stable, predictable cutting performance, so machining strategies can focus on optimising metal‑removal rates rather than compensating for tool instability. Contact Metav Werkzeuge today for tailored application advice and procurement of the Teknik Cutting Tools corner turning head (SKU T195TM); our Emmerich team will advise on integration and delivery. Technical data Article number: T195TM Name: Corner turning head Brand: Teknik Makina Type: for APKT 1604 indexable inserts Facts Mounting diameter: 60 mm Weight: 14.36 kg Cutting angle: 90° Diameter: 300 mm Overall length: 62 mm Cutting edges: 15 Special features Compatible inserts: APKT 1604 Suitable insert manufacturer: Korloy Fastening screw: M4x10 Torx Required key: T15 SKU: T195TM FAQ Which inserts fit this corner turning head? The corner turning head accepts APKT 1604 indexable inserts; compatibility is specified for these insert dimensions and geometries. What mounting diameter is required? A 60 mm mounting diameter is required for stable installation of the Teknik Makina corner turning head (SKU T195TM). What fastener and key are used to secure inserts? Inserts are secured with an M4x10 Torx screw; a T15 key is used for tightening and replacement. What is the overall length and how does it affect reach? The overall length is 62 mm, providing a compact footprint suitable for close‑quartered turning while still offering sufficient reach for standard corner operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
300mm Face Milling Cutter Head for SPKN 1203 Indexable Inserts, 75° Cutting Angle, 65mm Overall Length - Teknik Makina
Take advantage of a robust combination of high removal rate and straightforward maintenance for dependable face milling operations — compatible with SPKN 1203 indexable inserts and featuring a 300 mm diameter and 20 cutting edges. Order the face milling cutter head directly via Metav Werkzeuge or ask our consultants for technical advice. Face milling cutter head – 300 mm diameter, for SPKN 1203 indexable inserts (Teknik Makina) The Face milling cutter head is a purpose-built tool for efficient face milling using SPKN 1203 indexable inserts, designed for workshops and small production lines where consistent material removal and quick insert changes are required 300 mm diameter for broad cut width Compatible with SPKN 1203 indexable inserts 20 cutting edges for continuous machining 60 mm toolholder diameter for stable clamping High material removal with controlled cutting forces The cutter head is engineered to deliver consistent throughput: a 300 mm diameter combined with 20 cutting edges enables broad, even passes with less load per insert, which reduces vibration and increases tool life. The use of SPKN 1203 indexable inserts permits rapid replacement without regrinding, so the machining cycle stays productive. The 75° cutting angle promotes a controlled chip flow and helps maintain surface finish while optimising cutting forces — a clear advantage when productivity and repeatability are essential on the shop floor. Fast maintenance and secure clamping for minimal downtime Serviceability is built into the design: the toolholder accepts a 60 mm shank for secure mounting and improved rigidity during higher engagement cuts. Fast replacement of inserts is achieved via a clamping screw specification M8x24-L that is accessed with a 5 mm Allen key, allowing trained staff to perform routine changes and checks quickly. With a net mass of 15.11 kg, the assembly provides inertial stability that aids balance during heavy cuts while still permitting safe handling during maintenance. These details reduce non-productive time and simplify tool management. Versatile in-shop applications and reliable supply chain benefits This milling head is suitable for a wide range of face milling tasks where indexable inserts are preferred for their economy and turnaround speed. The compact overall length (65 mm) supports stiffer setups and better surface performance when paired with appropriate insert geometries. Sourcing through Metav ensures access to consistent stock levels and product support from a partner experienced in equipping workshops; Metav’s European hub in Emmerich acts as a quality filter, helping to keep workflows reliable and supply predictable. The result is fewer interruptions and a smoother production flow. Contact Metav Werkzeuge for detailed specification checks, availability and to discuss the Teknik Cutting Tools face milling cutter head (SKU T162TM) for integration into the current machining setup Technical data SKU: T162TM Manufacturer: Teknik Makina Designation: Face milling cutter head for SPKN 1203 indexable inserts Core dimensions Diameter: 300 mm Toolholder bore / holder diameter: 60 mm e: 101.6 mm Number of cutting edges: 20 Cutting angle: 75° Overall length: 65 mm Weight: 15.11 kg Features and compatibility Compatible with SPKN 1203 indexable inserts Clamping screw: M8x24-L Required Allen key: 5 mm Robust construction for stable face milling Designed for quick insert replacement FAQ Which indexable inserts fit this cutter head? The cutter head is designed for SPKN 1203 indexable inserts, enabling standard insert sizes and geometries to be used for face milling. How many cutting edges does the tool provide and what is the diameter? This face milling cutter head features 20 cutting edges and a 300 mm diameter for wide, efficient passes. What are the mounting and clamping specifications? Mounting uses a 60 mm holder diameter; clamping is secured with an M8x24-L screw that is tightened using a 5 mm Allen key. Is the assembly heavy to handle in a standard workshop? The assembly weighs 15.11 kg, offering improved stability during cutting while remaining manageable for workshop personnel with standard lifting procedures. What benefits does this cutter head bring to small-batch production? With quick replaceable inserts and stable clamping, the head reduces downtime and supports consistent surface quality, making it well suited to small-batch and mixed-production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm 90° External Turning Head for XNKT 0604 Indexable Inserts, M3x7 Torx Screw - Teknik Makina
Combine the 90° cutting geometry with a compact 16 mm mounting for precise corner machining and quick, secure insert changes; benefit from the lightweight design and Korloy XNKT 0604 compatibility for efficient production. Order directly via Metav Werkzeuge or request application advice from our specialists. Corner cutting head for XNKT 0604 indexable inserts — 90° turning head (Teknik Makina) Corner cutting head designed for 90° turning operations with XNKT 0604 indexable inserts, suitable for industrial turning and workshop toolrooms 90° cutting geometry for precise corner machining Fits XNKT 0604 indexable inserts (Korloy) 16 mm shank for secure toolholder engagement M3x7 Torx screw included, T8 key compatible Consistent 90° geometry for accurate corner finishing The Eckmesserkopf provides a defined 90° cutting angle that stabilises contact between insert and workpiece, reducing chatter and improving surface quality on corner profiles. Its 16 mm shank and 32 mm head diameter create a stiff mounting combination that keeps radial runout low and ensures repeatable results across batch production. By using standard indexable inserts, process times are shortened because the cutting edge is refreshed without regrinding; this holder is optimised for Korloy XNKT 0604 inserts to deliver a predictable tool life and consistent finish on common turning tasks. Rapid insert changes and reliable clamping for less downtime Designed for efficient workshop flow, the head uses an M3x7 Torx screw with a T8 key interface to allow quick, tool-assisted insert replacement and secure fixation. The compact overall length of 40 mm and the low mass of 0.15 kg keep centrifugal forces down in higher-speed turning and facilitate fast tool indexing. With 4 cutting edges specified, replacement cycles are straightforward and inventory management is simplified. The mechanical design focuses on clamping reliability under standard cutting forces so setup time is reduced and cycle consistency is improved. Seamless integration into production and versatile use cases Compatibility with Korloy XNKT 0604 indexable inserts makes this head a practical choice for general workshop and industrial applications, from single-part jobs to series production. The component’s compact footprint supports tight toolpost layouts on conventional lathes and modern CNC turning centres. For procurement and planning, Metav’s role as a European quality filter ensures stable supply and technical consistency, helping maintenance teams and production planners rely on continuous availability and traceable product specifications. Contact Metav Werkzeuge for application-matching advice or to secure supply of this Teknik Cutting Tools 90° corner cutting head; technical enquiries by e‑mail to info@metav-werkzeuge.com or by phone at +49 2822 7131930 will be handled by our specialists Technical Data SKU: T852TM Manufacturer: Teknik Makina For: XNKT 0604 indexable inserts (Korloy) ECLASS: 21180902 Facts Shank / mounting diameter: 16 mm Head diameter: 32 mm Overall length: 40 mm Weight: 0.15 kg Cutting angle: 90° Number of cutting edges: 4 Special features Torx screw: M3x7 Torx key: T8 Compatible insert type: XNKT 0604 Suitable for corner turning applications FAQ What inserts are compatible with this corner cutting head? The corner cutting head is designed for XNKT 0604 indexable inserts and is commonly used with Korloy grades suitable for turning. Which shank diameter is required for mounting? Mounting requires a 16 mm shank interface for secure engagement with the toolholder. Is a special key supplied for insert changes? Insert clamping uses an M3x7 Torx screw; a T8 key size is specified for tightening. How does the 90° geometry affect machining results? The 90° geometry provides stable corner support, reducing vibration and improving surface finish on shoulder and profile cuts. Who supplies this product in Europe? Supply and distribution are coordinated via Metav Werkzeuge, ensuring consistent availability and quality screening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Corner Turning Head for XNKT 0604 Indexable Inserts With Internal Coolant, 40mm - Teknik Makina
Compact dimensions, built-in coolant and proven insert compatibility combine to deliver reliable turning cycles with low overhang and simple maintenance; benefit from the 32 mm diameter and coolant-fed design for consistent chip control and predictable tool life — order the corner tool head directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head – 32 mm diameter, internal coolant | Teknik Makina The Corner tool head is a compact, coolant-fed turning solution designed for use with XNKT 0604 indexable inserts, suitable for tight setups and frequent insert changes 32 mm diameter for compact toolholders Internal coolant for improved chip evacuation Four cutting edges for uniform wear distribution Compatible with XNKT 0604 inserts (Korloy) Precision in a compact package A small footprint does not mean compromised rigidity. The combination of a 32 mm body and a short overall length of 40 mm reduces overhang and improves stability in turning operations, which directly lowers deflection and improves surface consistency. At only 0.15 kg mass, the component contributes to better spindle balance and faster acceleration. These measurable properties support higher reproducibility in batch production and simplify fixture planning on multi-tool turrets. Coolant-fed performance for longer tool life The integrated internal coolant channel supplies cutting fluid directly to the cutting zone, promoting effective chip evacuation and heat control. This targeted cooling reduces thermal load on the insert tips and helps preserve edge integrity over extended cuts. Combined with the head’s geometry and 4 cutting edges, the design spreads wear evenly across inserts, extending tool life and reducing the frequency of index changes — a clear efficiency gain for high-utilisation workshops. Fast insert changes and secure clamping Designed for XNKT 0604 indexable inserts, the head accepts inserts from Korloy and secures them with a Torx screw system (Torx key T8, screw M3x7). The simple, standardised fixation allows quick changeovers and predictable clamping torque, which supports consistent seating and repeatable cutting geometry. For production lines where downtime must be minimised, this straightforward serviceability shortens maintenance cycles and keeps machines cutting with minimal interruption. Predictable geometry for controlled machining The perpendicular 90° cutting angle yields a stable engagement geometry that is easy to programme and reproduce across multiple machines. This characteristic reduces setup iterations and supports reliable dimensional control in finishing and semi-finishing passes. Manufactured by Teknik Makina to industry expectations, the head provides a pragmatic balance between compactness and functional robustness, making it well suited to small-batch runs as well as series production. For reliable coolant-fed turning with XNKT 0604 inserts, contact Metav Werkzeuge to discuss technical suitability or to place your order for the Teknik Makina corner tool head via Metav Werkzeuge today Technical data Article number: T852-1TM Eclass: 21181015 Manufacturer: Teknik Makina Product type: Corner tool head For inserts: XNKT 0604 Compatible insert brand: Korloy Facts Diameter: 32 mm Overall length: 40 mm Shank diameter: 16 mm Weight: 0.15 kg Cutting edges: 4 Cutting angle: 90° Torx key: T8 Torx screw: M3x7 Special features Internal coolant Indexable design for fast insert changes Compact form for tight toolholders SKU: T852-1TM FAQ Is this head suitable for XNKT 0604 inserts? Yes. The corner tool head is designed specifically for use with XNKT 0604 indexable inserts and is compatible with Korloy versions of that geometry. Does the tool head provide internal cooling? Yes. The head features internal coolant to deliver fluid directly to the cutting edge, improving chip evacuation and thermal control. Which clamping hardware is required for insert changes? Insert retention uses a Torx screw system; the head accepts a T8 Torx key and a M3x7 screw for secure and repeatable clamping. What are the main dimensional advantages of this head? With a 32 mm diameter, 40 mm overall length and a low mass of 0.15 kg, the head minimises overhang and supports improved spindle balance for compact setups. Can the head be used for high-speed turning applications? The combination of compact design, internal coolant and standardised clamping makes the head suitable for many high-utilisation environments; application suitability should be confirmed with tooling parameters and machine limits. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Face Milling Head for LNMX 0603 Indexable Inserts, 5 Cutting Edges, 40mm Overall Height - Teknik Makina
Benefit from precise facing results and secure clamping: the combination of compatibility with LNMX 0603 indexable inserts and a compact, rigid design ensures reliable production throughput. Order the face milling head directly via Metav Werkzeuge or consult the team for technical advice. Face milling head for LNMX 0603 indexable inserts — 32 mm diameter, five cutting edges (Teknik Makina) The face milling head for LNMX 0603 indexable inserts is a compact cutter head engineered for efficient facing operations and straightforward insert changes on standard toolholders Compatible with LNMX 0603 Korloy inserts 32 mm cutter diameter for precise facing Five cutting edges for increased material removal Secure clamping with M3x7 Torx screws Reliable compatibility for predictable facing results This cutter head is tailored for use with LNMX 0603 indexable inserts from Korloy, providing a consistent cutting geometry that simplifies tool selection and repeatability in production. The 32 mm diameter offers a controlled contact area that reduces deflection during facing, while the arrangement of five cutting edges delivers uniform material removal. The result is a stable process that supports tight tolerances and predictable cycle times, making the component suitable for repetitive finishing tasks in busy workshops and light production lines. Secure clamping and fast serviceability reduce downtime Assembly and service have been engineered for efficiency: the insert is retained using M3x7 Torx screws and accessed with a T8 key, enabling quick and safe insert replacement. The tool shank accepts a 16 mm connection (aufnahme 16 mm) and the overall compactness — 40 mm overall height — reduces interference in confined setups. These mechanical choices minimise machine downtime and simplify maintenance routines, ensuring that machining schedules remain uninterrupted and tool changes are completed without specialised fixtures. Stability and throughput for production workflows A well-balanced cutter head geometry increases cutting stability and reduces chatter without resorting to oversized tools. The compact design and multiple cutting edges mean fewer index changes and more continuous cutting time, which directly improves productivity in repeated facing operations. The robust construction from a reputable tooling supplier ensures that the cutter head maintains edge position and alignment even under frequent use, supporting consistent surface finish and dimensional accuracy across runs. Metav's supply reliability and workshop support Sourced through Metav's European distribution network, this face milling solution benefits from a quality filter in Emmerich that prioritises reliable supply and clear specifications. Metav combines decades of metrology and tooling expertise with a broad product range, offering straightforward procurement for workshops and trade customers. Technical documentation and accessory parts such as replacement screws and keys are available through the same channel to keep the production line moving. For production-ready facing tasks choose the Teknik Cutting Tools face milling head and contact Metav Werkzeuge for ordering or tailored technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T835TM Designation: Face milling head for LNMX 0603 indexable inserts Manufacturer: Teknik Makina Core dimensions Diameter: 32 mm Overall height: 40 mm Shank diameter (aufnahme): 16 mm Cutting edges: 5 Torx screw: M3x7 Torx key: T8 Special features Compatibility: LNMX 0603 (Korloy) indexable inserts Secure clamping with Torx screws Compact design for facing operations Suitable for standard toolholders FAQ Which inserts fit this cutter head? The cutter head is designed for LNMX 0603 indexable inserts and is confirmed compatible with Korloy LNMX 0603 grades. How is the insert secured in the head? Insert clamping uses M3x7 Torx screws; the fasteners are tightened with a T8 Torx key to ensure a firm, repeatable seat. What dimensions define the tool's footprint? Core dimensions include a 32 mm cutter diameter, 40 mm overall height and a 16 mm shank connection for mounting. Can the head be used in compact tool setups? Yes; the compact overall height and shank size support installation in confined tool arrangements while maintaining cutting stability. Who supplies this face milling head? The face milling head is supplied by Teknik Makina and distributed through Metav Werkzeuge for seamless procurement and accessory availability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Chamfer Cutter 45° 6 Flutes, 60mm Shank, APKT 1604 Compatible - Teknik Makina
Take advantage of a robust chamfering solution that combines a 76 mm cutting diameter, a 60 mm shank and compatibility with APKT 1604 indexable inserts for a reliable production flow; order the chamfer cutter directly via Metav Werkzeuge or ask our consultants if needed. Chamfer cutter by Teknik Makina — 45° chamfer, APKT 1604 compatible Chamfer cutter for industrial edge chamfering and face preparation, designed for indexable insert operation in CNC and milling applications *Compatible with APKT 1604 inserts *45° chamfer geometry for precise edge preparation *60 mm shank for secure machine clamping *Six cutting edges for efficient material removal Precision chamfering that reduces set-up time and scrap The chamfering solution is engineered to deliver consistent results on series production runs. With a 45° cutting geometry and a substantial 76 mm maximum cutting diameter, the tool reduces the need for multiple passes and avoids uncontrolled burr formation. The insert system using APKT 1604 indexable inserts allows quick replacement without regrinding, which shortens downtime and keeps machining cycles predictable. This focus on process efficiency translates into reduced setup time and less scrap across batches. Secure clamping and stable cutting for improved surface quality A 60 mm shank provides the required rigidity for heavy-duty milling and contributes to vibration damping, which improves finished-edge consistency. The tool features six cutting edges, a configuration that spreads the cutting load and extends insert life while maintaining a steady material flow. For workshops stepping up production or integrating larger workpieces, the robust shank and balanced geometry ensure repeatable quality and a lower risk of chatter or edge burn. Versatile indexable system explained for practical application Using APKT 1604 indexable inserts means the tool can be maintained with standard industry inserts from compatible manufacturers, keeping running costs predictable. Insert indexing requires only a simple Torx screw (M4x10) and a T15 key for secure retention and fast changeovers. This familiar indexable concept simplifies inventory management and training requirements, making the cutter suitable both for experienced toolrooms and for operations transitioning to indexable tooling. Discuss integration and availability with Metav Werkzeuge — specify Teknik Makina chamfer cutter (SKU T456TM) to receive tailored advice and order support from the Emmerich team Technical Data Article number: T456TM Manufacturer: Teknik Makina Core specifications Cutting diameter max: 76 mm Shank diameter: 60 mm Overall length: 50 mm Weight: 0.734 kg Cutting edges: 6 Chamfer angle: 45° Special features For indexable inserts APKT 1604 Compatible inserts manufacturer: Korloy Torx screw: M4x10 Torx key: T15 FAQ What materials is this chamfer cutter suitable for? The chamfer cutter by Teknik Makina (SKU T456TM) is designed for general milling and chamfering applications; selection of the correct APKT 1604 insert grade will determine suitability for specific materials. How are the inserts secured and replaced? Inserts are clamped with an M4x10 Torx screw; a T15 key is used for secure fastening and quick replacement when the APKT 1604 insert reaches wear limits. Can the tool be used on large-format CNC machines? Yes — the 60 mm shank provides the rigidity required for stable clamping in larger machine spindles, enabling reliable chamfering on bigger workpieces. How many cutting edges are available and what is the benefit? The cutter has six cutting edges, which distribute cutting forces and extend insert life while maintaining consistent material removal and surface finish. Is the cutter compatible with inserts from different manufacturers? The tool is specified for APKT 1604 inserts and is noted as compatible with Korloy inserts; using equivalent grades from other reputable insert manufacturers is possible if dimensions match. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com