160mm Face Turning Tool Holder for SNKX 1206 and ONHX 0505 Indexable Inserts, 45° Cutting Angle, 40mm Shank - Teknik Makina
Product information "160mm Face Turning Tool Holder for SNKX 1206 and ONHX 0505 Indexable Inserts, 45° Cutting Angle, 40mm Shank - Teknik Makina"
Take advantage of a robust combination of a 160 mm diameter and a 45° cutting angle for efficient, high-quality face milling with indexable inserts; the secure 40 mm shank and well-distributed 12 cutting edges reduce downtime and support consistent cycle times. Order via Metav Werkzeuge or consult the Metav team for specification support.
Face milling head T628TM — 160 mm diameter, 45° cutting angle (Teknik Makina)
Face milling head T628TM designed for high-output face and shoulder milling with indexable inserts SNKX 1206 and ONHX 0505
- 160 mm diameter for broad surface milling
- 45° cutting angle for smooth chip flow
- Compatible with SNKX 1206 and ONHX 0505 inserts
- 40 mm shank for secure spindle mounting
- 12 cutting edges for reduced machining time
Greater productivity through optimised geometry
The milling head is engineered around a 160 mm tool body and a 45° cutting angle, a combination that promotes efficient chip formation and a fine surface finish on each pass. With 12 cutting edges distributed around the circumference, the tool reduces the number of interruptions for indexing and provides longer effective cutting periods per tool change. For workshop planning this translates into measurable time savings on large-area finishing tasks while maintaining repeatable results.
Fast insert changes and standardised clamping
The device accepts SNKX 1206 and ONHX 0505 indexable inserts, including the ONHX 0505 Palbit alternative, enabling use of industry-standard grades for varied materials and workloads. Insert retention uses M4x10 Torx screws driven with a T15 key, so insert replacement is straightforward and reproducible. This standardised approach lowers maintenance complexity and keeps tooling costs predictable by relying on off-the-shelf inserts and fast, tool-room-friendly procedures.
Secure mounting and workshop handling
A 40 mm mounting bore ensures a firm interface with the spindle or arbor, supporting stable rotation and reliable concentricity across operations. The head’s mass of 4.577 kg and an overall length of 63 mm contribute to a compact yet substantial assembly that resists vibration during heavy passes. These attributes make the unit well suited to production environments where both stability and fast cycle times are required, and where easy handling in mounting and removal is a practical benefit.
Practical advantages for production workflows
The modular design and compatibility with common insert types enable rapid adaptation to different cutting conditions without the need for special holders. Using standard inserts helps control inventory and streamlines procurement. The combination of the head’s geometry and insert count supports consistent surface quality while reducing indexing frequency, which helps keep machine uptime high and throughput predictable — a clear rational benefit for job shops and in-house production teams aiming to improve OEE.
Contact Metav Werkzeuge for a tailored specification or quotation on the Teknik Cutting Tools face milling head T628TM; assistance from the Emmerich team is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930
Technical data
- SKU: T628TM
- Manufacturer: Teknik Makina
Facts
- Diameter: 160 mm
- Cutting angle: 45°
- Cutting edges: 12
- Shank / bore: 40 mm
- Weight: 4.577 kg
- Overall length: 63 mm
Special features
- Compatible inserts: SNKX 1206, ONHX 0505
- Alternative insert: ONHX 0505 Palbit
- Torx screw: M4x10
- Torx key: T15
FAQ
Is this head compatible with Palbit inserts?
Yes. The T628TM accepts ONHX 0505 Palbit as an alternative, alongside the SNKX 1206 insert type specified for the face milling head.
Which retaining screws and key are required for insert changes?
Insert clamping on the milling head uses M4x10 Torx screws and a T15 Torx key for secure and repeatable retention.
What is the mounting size for the tool?
The face milling head features a 40 mm mounting bore for secure spindle or arbor attachment and stable machining performance.
How heavy and compact is the head for handling during tool changes?
The cutter head weighs 4.577 kg with an overall length of 63 mm, offering a compact footprint while providing the mass needed to reduce vibration in heavy cuts.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 45.0 |
|---|---|
| Designation: | Planmesserkopf |
| Diameter-1: | 160mm |
Zubehör
Take advantage of precise M5 threading and a compact 12 mm length for secure, space-saving fastening; the Torx drive reduces cam‑out and speeds assembly. Order directly via Metav Werkzeuge or consult our product specialists for application advice. Torx screw TC083TM — M5 x 12 mm, Torx drive (Teknik Makina) Torx screw TC083TM for mechanical assemblies where compact form and reliable torque transfer are required M5 thread for standard metric assemblies Head diameter 7 mm for defined seatings Compact 12 mm overall length for confined spaces Torx drive compatible with T20 bits Consistent M5 thread for secure connections The fastener is engineered with a defined M5 thread that provides consistent engagement and predictable clamping behaviour. Where repeatability matters, the metric thread profile reduces the risk of loosening under light vibration and simplifies torque setting during assembly. The specification supports common production and maintenance environments, enabling standardised tooling and fewer inventory variants. Space-saving dimensions that simplify assembly With an overall length of 12 mm and a head diameter of 7 mm, this component is designed for installations where clearance is limited. The compact geometry allows secure fastening without protruding components, which benefits stacked or nested assemblies. Small form factor screws like this shorten installation time in cluttered assemblies and often remove the need for additional countermeasures such as washers or spacers. Torx drive for efficient torque transfer and less wear A Torx drive provides improved engagement between tool and fastener, allowing higher torque transmission with reduced cam‑out compared with slotted or Phillips drives. The drive compatibility with T20 bits enables rapid screwdriving with cordless or pneumatic drivers while protecting both the bit and the screw head from premature damage. The result is faster cycle times and lower tool‑replacement costs in production and workshop settings. Designed for straightforward procurement and workshop use Supplied under the Teknik Makina designation, the TC083TM is a practical choice for procurement managers seeking an economical, repeatable fastening solution. The concise specification and common drive type simplify stockkeeping and tool selection. For workshops, the screw’s straightforward geometry and compatibility with standard Torx tooling support quick decisions on repair and retrofit operations. For reliable fastening from Teknik Makina, contact Metav Werkzeuge to discuss compatibility, availability or to place an order for the TC083TM fastener — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TC083TM EClass: 21189290 Manufacturer: Teknik Makina Key measurements Diameter: 7 mm Thread: M5 Overall length: 12 mm Angle: 60° Weight: 0.1 kg Features and compatibility Drive type: Torx Compatible driver: T20 Torx key Fastener type: screw FAQ What driver is required for this screw? The screw is designed for a Torx drive and is compatible with a T20 Torx key or bit; this ensures efficient torque transfer for the TC083TM. Is the TC083TM suitable for tight assemblies? Yes, the overall length of 12 mm and a head diameter of 7 mm make the TC083TM appropriate for compact or recessed fastening applications. Which thread does this fastener use? The fastener uses a metric M5 thread, suitable for common metric assemblies and compatible with standard M5 threaded holes and inserts. Can this screw be used with power drivers? The Torx drive and T20 compatibility allow use with cordless and pneumatic drivers; correct torque settings should be observed to avoid over‑tightening. Who manufactures this screw? The screw is supplied under Teknik Makina and listed with article number TC083TM for procurement and stock purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com