Precision cut-off tools for accurate grooving and part-off operations
Cut-off tools are narrow holder systems for lathes designed to produce precise grooves and part-offs, offering reliable control when machining steels and other workpiece materials where clean separation is essential. They serve as either solid clamp-style holders or flat tool blades fitted with indexable carbide inserts, and when equipped with internal coolant channels they deliver high-pressure coolant directly to the insert to control heat and evacuate chips efficiently. Using these tools reduces the risk of chip jamming, surface damage and sudden tool failure while improving repeatability, particularly in deep grooving and tough materials where external coolant is insufficient. Key advantages include enhanced cutting stability, extended insert life and consistent part quality through optimised chip evacuation and thermal management.
Grooving Holder RP116TM - Teknik Makina
Secure insert retention and clear identification ensure consistent grooving performance; suitable for standard clamping arrangements, the holder streamlines setup and reduces downtime. Order the Stechklemmhalter RP116TM directly via Metav Werkzeuge or ask our consultants for compatibility information. Stechklemmhalter RP116TM — grooving holder for secure insert clamping by Teknik Makina A Stechklemmhalter designed for reliable groove and parting operations in turning applications Grooving holder for precision insert clamping Clear identification — SKU RP116TM Suited for standard clamping systems Manufactured by Teknik Makina Stable clamping for predictable machining results A purpose-built grooving holder provides the fundamental advantage of consistent insert clamping, which translates into steady cutting conditions and fewer unscheduled interruptions. By maintaining a firm grip on the cutting insert, the toolholder reduces vibration and tool movement; this improves surface finish and helps preserve insert life. For workshops seeking repeatability across batches, a well‑matched clamping solution contributes directly to process stability and predictable cycle times. Streamlined integration into workshop routines Identification and compatibility are central to efficient tool management. The clear SKU RP116TM and the designation as a grooving holder make procurement and inventory tracking straightforward, while the holder’s design concept aligns with standard lathe toolposts and insert geometries. Explaining technical terms: indexable inserts are replaceable cutting tips that permit quick tool refresh without resetting the entire holder — this reduces setup time and keeps machine utilisation high. Such integration supports shorter changeovers and smoother production planning. Practical benefits for production and serviceability Choosing a dedicated grooving clamping solution reduces adjustment effort at the machine and simplifies maintenance routines. The compact nature of these holders typically allows for quick replacement of worn inserts without elaborate dismantling, preserving operator time and lowering the risk of setup errors. When paired with a transparent supplier relationship, such components become part of a broader supply-chain reliability that benefits both small workshops and industrial production lines seeking consistent throughput and traceable tool supply. Contact Metav Werkzeuge for availability and technical matching of Teknik Makina grooving holders; enquiries by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 will be handled by our specialists Technical Data Article number: RP116TM Product type: Grooving holder eClass: 21181005 Manufacturer: Teknik Makina Facts SKU: RP116TM E‑class code: 21181005 Category ID: 66743c8c3c0da73acbea80b2 Special features Category path: Zerspanen → Klemmhalter Label: Stechklemmhalter UID: RP116TM FAQ What operations is this holder intended for? The Stechklemmhalter RP116TM is intended for grooving and parting operations in turning processes, where secure insert clamping is required. Which inserts fit the holder? Insert compatibility depends on the insert geometry and size; the holder is designed for standard grooving/indexable inserts commonly used in lathe operations. Can the holder be used with different toolposts? The holder is suitable for integration with standard lathe toolposts, though final fitment should be checked against the specific machine setup. How does this holder affect tool life and surface finish? By ensuring consistent clamping and reducing vibration, the holder supports longer insert life and more consistent surface finish across identical parts. Where can detailed technical compatibility be obtained? Detailed compatibility and dimensional data are available from Metav Werkzeuge; contact info@metav-werkzeuge.com for specification requests. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Grooving Holder Stechklemmhalter, Modular Clamping - Teknik Makina
The Stechklemmhalter RP118TM offers a practical grooving clamping solution with straightforward identification (SKU RP118TM) and industrial-grade manufacture by Teknik Makina. Take advantage of clear procurement and a tool designed for standard grooving tasks — order the RP118TM directly via Metav Werkzeuge or consult Metav's specialists for integration advice. Stechklemmhalter RP118TM — Grooving holder from Teknik Makina, for secure clamping A Stechklemmhalter that serves as a dedicated grooving clamping tool for standard turning and grooving scenarios. Grooving holder for secure clamping Clear ordering via SKU RP118TM Manufactured by Teknik Makina Category: Klemmhalter Consistent clamping that stabilises grooving cycles The grooving holder is engineered to provide a stable interface between the tool and the workpiece, reducing variances during cut-off and grooving operations. With a focus on mechanical clamping rather than ancillary features, this holder supports repeatable tool positioning and contributes to consistent groove geometry. The RP118TM designation simplifies ordering and inventory management, while the basic clamping concept is suitable for routine workshop use where dependable mechanical performance is required. Bold design elements reduce setup ambiguity and promote reliable process results. Designed for straightforward workshop integration Workshops benefit from a concise tool description and an identified SKU that eases procurement and stock control. The RP118TM fits within the general class of grooving clamping tools and is listed under the Klemmhalter category, which aids sourcing teams when consolidating tooling assortments. Clear labelling and product classification support rapid identification in procurement systems and reduce administrative friction in buying or replacing holders on the shop floor. This practical approach supports efficient logistics and planning without unnecessary complexity. Procurement reliability and supply-chain confidence Sourcing from an established supplier brings advantages beyond the single part. Teknik Makina provides the brand origin for the holder, and distribution via Metav creates a localised supply channel for European buyers. Metav's track record, including a broad product range and long-standing customer relationships, underpins predictable delivery and dependable availability for industrial requirements. That reliability helps production planners maintain stock levels and reduces the risk of unscheduled downtime caused by missing clamping components. Typical applications and specification guidance The primary role of this grooving clamping device is the secure holding of grooving tools during turning and related metalcutting tasks. As product data for specific mounting dimensions and insert compatibility is not provided in the basic listing, selection should be made in context with the lathe tool post and the toolholder interface used in the workshop. The product is categorised for grooving and clamping applications and is suitable wherever standard grooving holders are required; for exact fitment and geometric parameters, consult the detailed technical documentation or the supplier's product sheet. For procurement and integration of the Teknik Makina RP118TM, rely on Metav Werkzeuge for streamlined ordering and technical consultation — contact Metav Werkzeuge to place an order or discuss application specifics. Technical Data Article number: RP118TM Product: Stechklemmhalter Product type: Grooving holder Manufacturer: Teknik Makina Facts eClass: 21181005 SKU: RP118TM Special features Label: Stechklemmhalter English designation: Grooving Holders Category path: Zerspanen > Klemmhalter Brand: Teknik Makina FAQ What is the primary use of this grooving holder? The grooving holder RP118TM is intended for secure clamping in grooving and related turning operations, providing a mechanical interface for grooving tooling. Does the RP118TM include mounting hardware? The standard listing does not specify included mounting hardware; confirmation of scope of delivery should be obtained from the detailed product documentation. Which toolholders or systems is this holder compatible with? Compatibility depends on the toolpost and clamping system in use; the item is classified as a grooving clamping holder and should be matched to the workshop's existing holder interfaces. Are dimensional drawings available for the RP118TM? Dimensional data are not present in the basic entry; detailed drawings or technical sheets are required to verify fitment and should be consulted prior to procurement. Who manufactures this grooving holder? The holder is produced by Teknik Makina and supplied under the RP118TM designation as a grooving clamping tool. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter - Rechtsschneidend SER 3232 P16-ER16 for 16 ER Wendeplatten Innenkühlung - Teknik Makina
Take advantage of a compact, precision-engineered clamping solution that combines stable support, quick insert compatibility and standardised mounting for smooth thread turning. Order the component via Metav Werkzeuge or consult the technical team for integration advice. Klemmhalter (clamping holder) SER 3232 — Right‑hand external thread, compatible with 16 ER inserts (Teknik Makina) The Klemmhalter is a compact clamping holder designed for turning external right‑hand threads on lathes and turning centres, offering standardised mounting and high stability for industrial and workshop use. Clamping holder for right‑hand external threads Compatible with 16 ER indexable inserts Head and body width 32 mm, cutting height 30 mm Overall length 170 mm, weight 1.41 kg Consistent thread form through rigid support The main benefit of this toolholder is its emphasis on precision and repeatability when producing external threads. Its geometry and 32 mm head width maintain a stable cutting position, which reduces vibration and helps achieve a uniform thread profile. Right‑hand thread cutting is defined by the holder’s orientation; a right‑hand tool advances when the spindle rotates clockwise, ensuring consistent engagement with the workpiece. For production runs where thread quality affects assembly performance, this holder provides a measurable improvement in surface finish and dimensional stability. Fast setup with standard indexable insert compatibility Designed to accept 16 ER indexable inserts and to pair with a P16‑ER16 boring bar mounting, the holder streamlines tooling logistics. Using standard insert sizes means reduced inventory complexity and faster changeovers on the shop floor. The clamping arrangement accepts the common M3.5x11 fastening screw and is serviceable with a T15 Torx key, enabling quick, repeatable insert changes without special tools. This combination lowers downtime between operations and supports efficient workflow in both small workshops and industrial turning cells. Compact dimensions for stable turning and easy integration With an overall length of 170 mm, cutting height 30 mm and a body height of 32 mm, the holder is sized to deliver rigidity without unnecessary overhang. The moderate mass (1.41 kg) contributes to dampening cutting forces while remaining manageable for routine tool changes and machine feed systems. Its ISO designation SER 3232 indicates standardised form and fit, simplifying integration into existing tool posts and fixtures; this reduces adjustment time and supports predictable machining behaviour. Practical features that speed maintenance and reduce errors The holder is supplied with a compatible TA061 U‑plate and uses the listed locating washer BSP010, helping to ensure correct alignment during installation. The secure clamping mechanism and standard screw interfaces mean fewer handling errors and reliable repeatability after maintenance. Being intended for right‑hand operation, the toolholder is optimised for conventional threading directions and common workshop practices, so set‑up instructions remain straightforward for trained staff and reduce the need for complex fixturing. For dependable right‑hand thread turning, request Teknik Makina SER 3232 via Metav Werkzeuge — technical advice and order support are available from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: D504TM Manufacturer: Teknik Makina Designation: Klemmhalter For: external right‑hand thread ISO designation: SER 3232 Facts Head width: 32 mm Body width: 32 mm Holder height: 32 mm Cutting height: 30 mm Overall length: 170 mm Weight: 1.41 kg Insert type: 16 ER Boring bar reference: P16‑ER16 Torx key: T15 Fastening screw: M3.5x11 Special features Cutting direction: right‑hand U‑plate reference: TA061 Locating washer: BSP010 Compatible with standard 16 ER indexable inserts ISO series designation for standard fit FAQ What insert type fits this holder? The holder accepts 16 ER indexable inserts and is specified to work with P16‑ER16 bore references for standard insert clamping and alignment. Is the toolholder suitable for left‑hand threads? This version is configured for right‑hand external threads; left‑hand threading requires a left‑hand variant. Which tools are needed for insert changes? Insert replacement and clamping use a T15 Torx key and an M3.5x11 fastening screw, both common in workshop tool kits. How does the SER 3232 designation help in selection? The SER 3232 ISO designation indicates standardised dimensions and fit, simplifying compatibility checks with tool posts and U‑plates in existing setups. Can the holder be used for production runs on turning centres? Yes, the compact design, standard insert compatibility and stable geometry make it suitable for both one‑off and series production on lathes and turning centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter - SER 0808 H11-ER11 for 11 ER Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
The combination of a secure Torx fastening, a compact 8 x 8 mm head and full compatibility with 11 ER indexable inserts delivers reliable right‑hand external threading with minimal set‑up time; order the clamp holder directly via Metav Werkzeuge or consult their specialists for machine‑specific advice. Clamp holder SER 0808 — clamp holder for 11 ER indexable inserts, right‑hand (Teknik Makina) The clamp holder SER 0808 is a compact toolholder for right‑hand external threading, designed to accept standard 11 ER indexable inserts and to fit H11‑ER11 boring bar interfaces Clamp holder for 11 ER indexable inserts Right‑hand cutting orientation Compact head: 8 x 8 mm for tight setups Torx T8 screw M2.5x5.5 for secure fastening Precision clamping for consistent external threading The SER 0808 toolholder provides reliable clamping for external threads by pairing the standard 11 ER insert pocket with a robust retention concept. The designation 11 ER refers to the insert size and geometry commonly used in external turning and threading applications, so the holder ensures correct seating and predictable chip flow. With a defined right‑hand cutting orientation, the toolholder supports consistent thread profile generation and reduced rework, making it suitable for medium‑volume production where repeatability matters. The secure clamp design minimises insert movement under cutting forces, improving surface finish and dimensional stability. Space‑saving geometry for flexible tool stations A compact head profile of 8 x 8 mm and an overall length of 100 mm make this toolholder a practical choice for machines with limited turret clearance or multiple adjacent tools. The restrained dimensions reduce the risk of interference and allow closer tool spacing, which is beneficial for multi‑operation setups. At an approximate weight of 0.061 kg, the holder contributes minimally to turret imbalance and can aid quicker acceleration and deceleration during cycle changes. The compact design therefore supports efficient machine layouts while maintaining the rigidity required for accurate external threading. Secure fastening and straightforward maintenance Retention is achieved with a Torx T8 drive and an M2.5x5.5 screw format, providing a positive torque interface that resists loosening during operation. The use of standard fasteners simplifies maintenance routines and spare‑parts management across the workshop. The holder is specified as SER 0808 and pairs with H11‑ER11 boring bars, ensuring compatibility with established tool systems. Quick insert changes and easy access to the clamping screw result in reduced downtime and predictable tool change procedures, supporting uptime and process reliability on the shop floor. For technical consultation, availability or application advice on the Teknik Makina clamp holder (SER 0808, SKU D494TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss integration with specific machines and insert grades Technical data Article number: D494TM Manufacturer SKU: D494TM ISO designation: SER 0808 Compatible boring bar: H11‑ER11 Compatible inserts: 11 ER Cutting direction: right Facts Head width: 8 mm Head height: 8 mm Cutting height: 20 mm Overall length: 100 mm Weight: 0.061 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Right‑hand external threading orientation Designed for indexable 11 ER inserts Compact geometry for tight turret layouts Standardised fastener interface for easy maintenance FAQ What inserts fit this holder? The clamp holder accepts 11 ER indexable inserts; it is designed to secure these standard external‑threading inserts reliably. Is the holder suitable for left‑hand threading? This specific toolholder is configured for right‑hand cutting; left‑hand threading requires a corresponding left‑hand holder. Which fastening hardware is used for clamping? Retention uses a Torx T8 drive with an M2.5x5.5 screw for positive torque and stable clamping. What dimensions are important for turret clearance? Key dimensions are the head 8 x 8 mm and the overall length 100 mm, which help determine fit in compact tool stations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter - SER 2525 M16-ER16 for 16 ER Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from a compact, right‑hand external threading tool holder that combines precise clamping with broad compatibility for 16 ER inserts; the robust 25×25 mm head and 150 mm overall length support stable threading operations in workshop and production environments. Order directly via Metav Werkzeuge or consult our specialists for fitment and application advice. Clamping Threading Tool Holder (SER 2525) — Right‑hand, for 16 ER inserts by Teknik Makina Clamping Threading Tool Holder (SER 2525) for right‑hand external threading, designed for use with 16 ER indexable inserts and compatible M16‑ER16 shank systems for turning and threading tasks Right‑hand external thread holder Fits 16 ER indexable inserts Compact 25×25 mm head design 150 mm overall length for stable reach High compatibility that reduces tool change and downtime The holder is built for standardised workshop workflows: its SER 2525 designation and compatibility with 16 ER inserts enable the use of common threading plates, simplifying inventory and reducing changeover time. With a 150 mm overall length and a compact 25×25 mm head, the component provides consistent positioning for external threading operations. The design ensures repeatable results while limiting the need for multiple dedicated holders. Secure clamping and serviceable fastening for safe operation Clamping is achieved via the supplied fastening hardware specification: Torx T15 engagement and an M3.5×11 screw ensure secure retention of the insert pocket, while the included TA061 top plate and BSP010 spacer support correct insert seating. A 0.75 kg mass gives the assembly enough inertia to stabilise cutting forces without burdening the lathe turret. The 30 mm cutting height is optimised for standard insert geometries, so set‑up and calibration are straightforward and predictable. Designed for integration into production and workshop systems Right‑hand cutting direction and a clear bore‑bar designation (M16‑ER16) make the toolholder suitable for rapid integration into existing tool posts and bar systems. The compact footprint reduces interference on multi‑station setups, while the ISO‑style reference (SER 2525) aids documentation and tool management. Routine maintenance is made easier by standardised fasteners and accessible clamping components, supporting uptime and consistent part quality. Contact Metav Werkzeuge for availability and application support — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fitment and order the Teknik Makina SER 2525 holder (SKU D503TM) for reliable threading performance Technical data Article number: D503TM Manufacturer: Teknik Makina Designation: Clamping holder for external thread, right‑hand (SER 2525) SKU: D503TM Facts Head height: 25 mm Head width: 25 mm Cutting head width: 25 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.75 kg Special features For indexable inserts: 16 ER Bore‑bar designation: M16‑ER16 Clamping top plate: TA061 Spacer: BSP010 Torx key: T15 Torx screw: M3.5×11 Cutting direction: right FAQ What insert type does this holder accept? The holder is specified for 16 ER indexable inserts and is compatible with standard 16 ER threading plates for external threads. Is the toolholder suitable for right‑hand threading only? Yes. The holder is configured for right‑hand cutting and has a right‑hand thread orientation by design. Which shank or bore‑bar standard fits this clamping holder? The product lists M16‑ER16 as the bore‑bar designation, allowing integration with compatible ER16 clamping systems. What fasteners are used for clamping the insert? Clamping is secured with a Torx T15 interface and an M3.5×11 screw; the top plate TA061 and spacer BSP010 assist correct insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter - SER 3232 P22-ER22 for 22 ER Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from precision clamping, proven ER22 compatibility and a compact 170 mm overall length for efficient lathe setup. Order this clamp holder directly via Metav Werkzeuge or consult our experts for configuration advice. Klemmhalter (SER 3232) — Threading toolholder by Teknik Makina, right-hand, 32 mm head The Klemmhalter is a dedicated clamp holder for right-hand external threading on lathes, engineered for use with 22 ER indexable inserts and P22-ER22 boring bars. Right-hand threading orientation Compatible with 22 ER indexable inserts Cutting head width 32 mm Torx fastening: T15, M4x15 screw Faster setup and consistent results with precision clamping The holder delivers precision clamping that reduces tool movement and repeat set-ups, helping to keep cycle times predictable. With a 32 mm cutting-head width and a defined cutting height of 30 mm, the design ensures a stable tool centre and consistent thread form during external threading operations. The SER 3232 format integrates easily into conventional tool posts, so changeover between tools becomes a controlled, time-saving procedure rather than a trial-and-error task. Broad compatibility reduces tooling complexity Designed around the common ER22 interface, the clamp holder accepts standard 22 ER indexable inserts and mates with P22-ER22 boring bars, enabling seamless integration into existing tool pools. The inclusion of reference parts such as the U-plate TA062 and pass ring BSP010 means the holder works with familiar accessories, lowering the need for special adapters. This compatibility translates to lower stocking requirements and fewer disruptions on the shop floor. Secure fastening and service-friendly details Fastening is achieved with a Torx T15 engagement and an M4x15 screw, providing secure clamping torque while allowing straightforward maintenance with common workshop tools. The nominal weight of 1.396 kg and an overall length of 170 mm balance rigidity with manageable handling during set-up. The ISO designation SER 3232 indicates an established form factor for repeatable mounting and predictable mechanical behaviour under cutting loads. Practical benefits for workshop use The holder is optimised for right-hand (clockwise) threading operations and is specified for external thread turning applications. Its compact proportions and standardised interfaces support flexible machine assignment — from single-station lathes to multi-spindle turning centres — while the robust construction supports steady cutting, which in turn reduces rework. For operations that demand repeat accuracy and reliable clamping, this toolholder offers a pragmatic mix of performance and compatibility. Contact Metav Werkzeuge for tailored advice on Teknik Makina clamp holders (SER 3232), compatibility checks with ER22 tool systems and to arrange procurement via our Emmerich hub – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D506TM Manufacturer: Teknik Makina ISO designation: SER 3232 Facts Cutting head width: 32 mm Holder height: 32 mm Cutting height: 30 mm Overall length: 170 mm Weight: 1.396 kg Compatible insert type: 22 ER Special features For outside thread, right-hand For indexable inserts 22 ER Compatible with P22-ER22 boring bars U-plate: TA062 Pass ring: BSP010 Fastening: Torx T15 with M4x15 screw FAQ What is the clamp holder intended for? The Klemmhalter is intended for right-hand external threading on lathes, configured to hold 22 ER indexable inserts for consistent thread generation. Which inserts and toolbars are compatible? Compatibility is with 22 ER indexable inserts and P22-ER22 boring bars; the holder’s geometry and ER22 interface support standard insert sizes. What are the key dimensions to consider during setup? Key dimensions: cutting head width 32 mm, cutting height 30 mm, overall length 170 mm and weight 1.396 kg, which help define clearances and tool-post capacity. How is the insert retained and what hardware is required? Retention uses a Torx screw (T15) with an M4x15 thread; the fastening approach provides secure clamping and easy serviceability with common tools. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 10mm x 10mm SER 1010 H11-ER11 for 11 ER Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, ISO‑aligned clamping solution that combines precise insert compatibility with straightforward maintenance; the SER 1010 format and 10 x 10 mm clamping head enable reproducible right‑hand threading while Metav Werkzeuge provides reliable procurement and technical guidance. Clamping Holder SER 1010 (D495TM) – 10 x 10 mm head, right‑hand thread by Teknik Makina The Clamping Holder SER 1010 is a toolholder for turning applications designed for outside right‑hand threads, suitable for standard 11 ER indexable inserts and small‑profile toolposts. Compact 10 x 10 mm clamping head Compatible with 11 ER indexable inserts Right‑hand thread orientation Lightweight at 0.091 kg for low overhang Consistent thread quality through defined geometry The compact SER 1010 format provides a clearly defined clamping face and controlled cutting height, which together deliver reproducible threading on outside right‑hand threads. The specified 20 mm cutting height and the dedicated insert pocket for 11 ER plates reduce axial variation during turning, resulting in fewer scrap parts and less rework. For workshops aiming for measurable process stability, the holder’s nominal dimensions support predictable tool offsets and simpler cycle programming. Faster set‑ups and predictable maintenance intervals A small footprint of 10 x 10 mm for the clamping head and an overall length of 100 mm simplify integration into compact toolposts and reduce interference with adjacent tooling. Fast mechanical access is enabled by the Torx T8 key and M2.5 x 5.5 torx screw, allowing controlled clamping torque and quicker insert changes. The modest mass of 0.091 kg lowers centrifugal loads and can improve balance on long overhangs, decreasing vibration and extending insert life—advantages that translate directly into reduced machine downtime. Broad compatibility for routine turning tasks The holder is specified for use with H11‑ER11 boring bars and standard 11 ER indexable inserts, ensuring cross‑compatibility with common turning tool inventories. Its right‑hand cutting orientation is optimised for conventional outside threading operations. The ISO designation SER 1010 clarifies the holder’s interface dimensions for machining planners and procurement, so replacement and system matching are straightforward and verifiable against tool lists and CAM setups. For specification checks or to request a tailored quotation for Teknik Makina’s clamping holder, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: D495TM Manufacturer: Teknik Makina Designation: Clamping holder for outside right‑hand thread ISO designation: SER 1010 Core specifications Overall length: 100 mm Clamping head: 10 x 10 mm Cutting height: 20 mm Weight: 0.091 kg Cutting direction: right Compatible insert: 11 ER Torx key: T8 Torx screw: M2.5 x 5.5 Special features Compatible with H11‑ER11 boring bar Built for outside right‑hand threading Designed for standard 11 ER indexable inserts FAQ Which insert format fits this holder? The clamping holder accepts 11 ER indexable inserts, which are industry‑standard profiles for turning and threading operations and fit the SER 1010 pocket. Is the holder suitable for outside right‑hand threading only? Yes. The toolholder is specified for outside right‑hand threads and is configured accordingly for conventional turning on the right‑hand side. What are the key dimensions for machine set‑up? Key dimensions include a 10 x 10 mm clamping head, 20 mm cutting height and an overall length of 100 mm; these values support accurate tool offset programming for the D495TM holder. Which fastening hardware is required for insert clamping? Insert retention uses a Torx T8 key with an M2.5 x 5.5 torx screw, enabling consistent clamping torque and straightforward insert changes. Can this holder be used with common boring bars? Yes; the holder is compatible with H11‑ER11 boring bars, allowing integration into standard turning toolsets for routine workshop applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 12mm x 12mm SER 1212 K11-ER11 For 11 ER Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, ISO‑compatible clamp holder that combines precise clamping, fast insert changes and robust dimensions for consistent external threading – ideal for repetitive production. Order the clamp holder directly via Metav Werkzeuge or consult the specialists for compatibility advice. Clamp holder SER 1212 — right‑hand outside‑thread clamping, Teknik Cutting Tools The Clamp holder SER 1212 is a compact toolholder engineered for secure clamping of 11 ER indexable inserts when machining right‑hand external threads. ISO designation SER 1212 for easy integration Compact 12 mm width and 12 mm height Compatible with 11 ER indexable inserts Torx T8 screw M2.5x5.5 for repeatable clamping Precise clamping that reduces setup variation The holder is designed to deliver consistent clamping across repeated operations, which reduces part deviation and rework. With its SER 1212 ISO designation the component matches common toolpost standards, enabling straightforward replacement of older holders without recalibration of the clamping plane. The compact form and secured screw interface provide stable seat location for the insert, contributing to repeatable tool geometry and predictable machining results. Fast, reliable insert changes to minimise downtime A mechanical design centred on quick insert retention means changeovers are performed with minimal effort. The combination of a Torx T8 driver and M2.5x5.5 screw secures the insert reliably while allowing controlled torque during replacement. This reduces the risk of incorrect fastening and supports an efficient workflow when multiple insert swaps are required on short production runs. Balanced dimensions for rigidity and access With a width of 12 mm, height of 12 mm and a cutting height of 20 mm, the clamp holder provides a compact footprint while maintaining sufficient cross‑section for rigidity. The 125 mm overall length offers a practical reach for external threading operations without excessive overhang. The measured mass of 0.16 kg contributes to stable dynamic behaviour on the turret and helps keep tool balance predictable during rapid indexing. Clear compatibility with standard insert and bar interfaces The holder is specified for 11 ER indexable inserts and pairs with the K11‑ER11 clamping bar designation, ensuring compatibility with widely used insert families and bar systems. The defined right‑hand cutting direction aligns with conventional external thread turning applications, simplifying tool selection and ensuring correct cutting geometry without additional adaptation. Designed for workshop integration and efficient inventory As a standardised clamp holder, this item is intended to integrate seamlessly into existing turning stations and tool assortments. The ISO labelling and familiar connection details simplify stock management and spare‑part replacement. Sourcing through an experienced distributor like Metav Werkzeuge benefits procurement reliability and reduces the administrative overhead associated with multiple suppliers. Durable construction for dependable production routines Although detailed material and coating data are not provided here, the mechanical concept—secure screw clamping, defined seat geometry and compact dimensions—fosters long service life under typical turning conditions. The robust assembly supports repeatable tightening and maintains seating integrity across insert changes, which helps preserve tool performance and reduces the frequency of unplanned adjustments. For technical clarification or to secure supply, contact Metav Werkzeuge GmbH in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 — the team can advise on Teknik Cutting Tools clamp holder SER 1212 (SKU D497TM) and its fit for specific toolholders Technical data SKU: D497TM ISO designation: SER 1212 Manufacturer: Teknik Makina Width: 12 mm Height: 12 mm Cutting height: 20 mm Total length: 125 mm Weight: 0.16 kg Torx key: T8 Torx screw: M2.5x5.5 For indexable inserts: 11 ER Compatible toolholder: K11-ER11 Cutting direction: right-hand Suitable for outside threads Design: clamp holder for external threading FAQ What insert type does this clamp holder accept? The clamp holder accepts 11 ER indexable inserts and is designed to work with corresponding insert geometries for external threading. Is the holder suitable for right‑hand threading only? Yes, the design specifies a right‑hand cutting direction for outside threads, matching standard right‑hand turning operations. Which toolholder or bar does it pair with? Compatibility is indicated with K11‑ER11 toolbars; the ISO designation SER 1212 ensures alignment with common toolpost standards. What is the overall length and how does that affect reach? The overall length is 125 mm, providing practical reach for external thread machining while keeping overhang and vibration risk low. What is the SKU for ordering and reference? The product is listed under SKU D497TM for ordering and stock reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 16 ER, SER 1616, H16-ER16 for 16 ER Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a standardised SER 1616 interface and compact 16 x 16 mm body to speed set-up and ensure repeatable threading results; order directly via Metav Werkzeuge or consult the team for process compatibility and delivery options. Clamping holder for external right-hand thread »SER 1616« – Teknik Cutting Tools A clamping holder engineered for right-hand external threading, compatible with 16 ER indexable inserts and designed for reliable workshop use SER 1616 standardised design Compatible with 16 ER inserts Right-hand threading orientation Compact 16 x 16 mm body Consistent centring and repeatable threading quality The SER 1616 interface and compact 16 x 16 mm profile provide a rigid, predictable mounting that reduces runout and setup variability. This standardised mounting translates into improved repeatability and fewer rejected threads in serial production. By choosing a holder with a defined cutting height and clamping geometry, machine shops benefit from shortened machine idle times and more consistent surface finishing on external threads. Fast, secure clamping for stable cutting performance The holder uses a proven clamping concept with a T15 torx engagement and an M3.5x11 fastening screw, enabling controlled clamp force and straightforward insert changes. The specified cutting height of 25 mm aligns the insert with common toolpost setups, which minimises rework and reduces vibration during threading operations. The combination of secure fixing and quick access to the insert supports efficient shift-to-shift tooling changes while maintaining process stability. Workshop-ready compatibility and easy integration With an overall length of 100 mm and a nominal mass of 0.22 kg, the unit integrates neatly into standard toolbanks and turning fixtures without excessive overhang. It is designed for 16 ER indexable threading inserts and matches H16-ER16 tool shank systems, offering broad compatibility across existing machine tool fleets. The right-hand cutting orientation suits conventional lathe threading applications. Sourcing through Metav ensures a stable supply chain and access to technical advice, supporting uninterrupted production and straightforward parts replacement. Contact Metav Werkzeuge today for technical advice or to order Teknik Cutting Tools’ SER 1616 clamping holder; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D501TM Manufacturer: Teknik Cutting Tools Designation: Clamping holder for external right-hand thread (SER 1616) Dimensions & weight Body height: 16 mm Head / cutting width: 16 mm Body width: 16 mm Cutting height: 25 mm Overall length: 100 mm Weight: 0.22 kg Features & compatibility Compatible with 16 ER indexable inserts SER 1616 profile Right-hand cutting direction Torx key size T15 Fastening screw M3.5x11 U‑plate: TA061 Shim: BSP010 Toolholder designation: H16-ER16 FAQ What insert size does this holder accept? The holder is specified for 16 ER indexable threading inserts and matches the H16-ER16 tool shank designation. Is the holder suitable for left-hand threads? This model is configured for right-hand external threading and is intended for conventional clockwise cutting on lathes. Which fastening screw is required for the clamping screw? Fastening is performed with an M3.5x11 screw and torx engagement T15 for secure, repeatable clamping. Can the toolholder be used in compact tool posts? With a 16 x 16 mm body and overall length of 100 mm, the holder fits most standard compact toolposts and modular tool systems. What is the cutting height and why does it matter? The cutting height is 25 mm; correct cutting height ensures the insert sits on centre with the workpiece axis, reducing tool wear and improving thread geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 16 IR SEL 2525 M16- IR16 for 16 IR Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of secure, repeatable clamping with a compact footprint and left‑hand cutting orientation for efficient turning setups; compatible with standard 16 IR indexable inserts and featuring a 25×25 mm head for tight tool layouts. Order directly via Metav Werkzeuge or request advice from our consultants for integration into existing tool chains. Clamping holder 16 IR — left‑hand, SEL 2525 clamping tool by Teknik Makina Clamping holder 16 IR a left‑hand clamping tool for indexable 16 IR inserts, intended for compact turning and toolpost installations where secure insert retention and precise cutting height control are required Left‑hand orientation for reverse cutting For 16 IR indexable inserts Compact 25×25 mm head and shank 150 mm overall length, weight 0.753 kg Precision clamping for consistent machining results The Clamping holder 16 IR delivers precision clamping via a compact geometry that stabilises indexable inserts during cutting. With a 25 mm head width and an effective cutting height of 30 mm, the design reduces vibration and repeatable run‑out, which translates into improved surface finish and longer insert life. The result is measurable process stability—fewer tool changes and more consistent cycle times on batch production. Compact design that fits tight tool layouts The SEL 2525 format combines a 25×25 mm head and shank profile with a 150 mm overall length, enabling close‑packed toolpost arrangements and multi‑station turrets. The holder’s modest mass (0.753 kg) helps to keep centrifugal loads low on high‑speed turrets while still providing the rigidity expected in a workshop environment. Compatibility with the M16‑IR16 shank designation simplifies replacement and inventory management for standardised tool fleets. Practical handling and installation in the workshop Installation and set‑up are straightforward: the holder secures 16 IR inserts with a positive clamping action that preserves insert position during heavy cuts. The left‑hand cutting orientation is clearly marked, reducing the risk of incorrect mounting in mixed‑direction toolrooms. As the component is compact and lightweight, it supports rapid tool changeover routines and reduces downtime in production maintenance cycles. Suitable use cases and reliability in production Designed for small to medium‑batch turning operations, this clamping holder is beneficial where repeatability and compact arrangement matter most. The combination of SEL 2525 geometry and standard 16 IR compatibility supports lean tooling strategies and consistent output quality. For operations prioritising uptime and predictable machining results, the holder offers a pragmatic balance between space economy and robust insert retention. Contact Metav Werkzeuge for specification support and to confirm fitment of the Teknik Makina SEL 2525 clamping holder for immediate integration — reach our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: D511TM Manufacturer: Teknik Makina Model designation: SEL 2525 Description: Clamping holder 16 IR Facts Head width: 25 mm Holder width: 25 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.753 kg Special features For 16 IR indexable inserts Left‑hand cutting direction Shank designation: M16‑IR16 Compact SEL 2525 geometry Positive insert clamping FAQ What inserts are compatible with this holder? The clamping system is designed for 16 IR indexable inserts; the holder accepts standard 16 IR geometry. Is the holder suitable for left‑hand cutting only? Yes, this variant is specified for left‑hand cutting direction and is marked accordingly for correct mounting. What are the key dimensions to check for turret fitting? Important dimensions include the 25×25 mm head and shank profile, 30 mm cutting height and 150 mm overall length; verify these against the machine tool envelope. How heavy is the holder and does that affect turret balance? The holder weighs 0.753 kg; its moderate mass aids balance considerations on multi‑station turrets compared with larger, heavier holders. Which model designation should be ordered for stock management? Order under the SEL 2525 designation and reference SKU D511TM to ensure the correct Teknik Makina clamping holder is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 22 ER SER 2525 M22-ER22 for Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, right‑hand external threading solution that pairs stable clamping with broad insert compatibility; its ISO SER 2525 design and acceptance of 22 ER indexable inserts simplify inventory and reduce setup time. Order the tool directly via Metav Werkzeuge or consult the technical team for tailored integration. Clamping holder D505TM (Teknik Makina) — Right‑hand external threading, for 22 ER indexable inserts The clamping holder D505TM is a right‑hand toolholder engineered for external threading tasks, offering standardised fitment and a compact 25 x 25 mm cutting head suitable for workshop and small‑batch production environments Right‑hand external threading Compatible with 22 ER indexable inserts Compact 25 x 25 mm cutting head 150 mm overall length for stable reach Increased throughput through standardised insert compatibility The holder's acceptance of 22 ER indexable inserts and the ISO SER 2525 designation create a practical, rational advantage: fewer spare parts and quicker changeovers. By matching a common insert family and a recognised interface, the unit reduces inventory complexity and shortens set‑up times on the machine bench, which in turn helps maintain steady cycle times on repetitive threading operations. This focus on compatibility translates into measurable productivity gains without the need for specialist inserts. Consistent clamping for repeatable results A robust clamping concept is central to repeatable thread quality. The clamping assembly is secured with an M4x15 screw driven by a T15 Torx key and is supported by the TA062 U plate and BSP010 shim for precise alignment. The compact 25 x 25 mm cutting head and a 30 mm cutting height provide tool‑to‑workpiece rigidity, while the 150 mm overall length balances reach and stability. At 0.74 kg, the unit is light enough for quick handling yet substantial enough to resist chatter, delivering reliable surface finish and thread form across production runs. Built for machinists and production workshops Designed for lathes and turning centres where right‑hand external threads are required, the holder fits the M22‑ER22 bar designation and integrates into standard tool posts. Its configuration suits toolrooms, contract manufacturers and small series production where flexibility, fast tool changes and dependable clamping are priorities. The engineering focus is on lowering total cost of ownership through reduced downtimes and predictable performance, making the holder a practical choice for teams seeking efficient, standards‑based tooling solutions. Contact Metav Werkzeuge today for bespoke advice on integrating the Teknik Makina D505TM clamping holder into existing setups and to secure reliable supply from our Emmerich stock by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D505TM Manufacturer: Teknik Makina Product: Clamping holder for external threading (right) ISO designation: SER 2525 Core technical data Overall length: 150 mm Weight: 0.74 kg Holder height: 25 mm Holder width: 25 mm Cutting head width: 25 mm Cutting height: 30 mm Special features Compatible with 22 ER indexable inserts Bar designation: M22‑ER22 Cutting direction: right‑hand Torx screw: M4x15 Torx key: T15 U plate: TA062 Shim: BSP010 FAQ What insert type does this holder accept? The D505TM holder accepts 22 ER indexable inserts and is designed for standard insert families to simplify stocking and changeover procedures. Is the holder suitable for external threading only? The unit is configured for right‑hand external threading, optimised for external thread production on lathes and turning centres. What fasteners and accessories are included or required? The clamping assembly uses an M4x15 Torx screw (Torx T15). Alignment and mounting reference parts include the TA062 U plate and BSP010 shim. Which bar or shank designation is compatible with the holder? The holder is specified with the M22‑ER22 bar designation, enabling integration with matching tool bars and systems. How does the holder support stable machining and surface finish? The combination of a 25 x 25 mm cutting head, 30 mm cutting height and a 150 mm overall length provides a balance of rigidity and reach, reducing vibration and improving thread consistency. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 22 IR° SEL 2525 M22- IR22 für 22 IR Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Combining a compact 25 x 25 mm cutting head, left-hand cutting orientation and compatibility with 22 IR indexable inserts, this clamp holder delivers stable, repeatable performance in turning operations; order the component via Metav Werkzeuge or consult their specialists for application advice. Clamp holder D513TM — left-hand holder for 22 IR indexable inserts (Teknik Makina) Clamp holder D513TM is a left-hand turning tool holder designed for indexable 22 IR inserts, providing a compact solution for lathe tooling and constrained setups. Left-hand cutting direction Compatible with 22 IR indexable inserts Cutting head 25 x 25 mm Overall length 150 mm, weight 0.749 kg Consistent clamping for accurate turning cycles The D513TM clamp holder is engineered to ensure stable clamping and consistent cutting geometry when used with 22 IR indexable inserts. The ISO designation SEL 2525 denotes a standardised tool interface that simplifies tool change routines and reduces set-up time. Left-hand cutting orientation is specified for operations where the insert engages the workpiece from the opposite approach compared with right-hand tools; this distinction reduces unexpected axial forces and contributes to predictable chip flow and tool life. The result is improved process reliability and reduced rework in production environments. Space-saving design that improves access and setup A compact cutting head of 25 x 25 mm and a cutting height of 30 mm make the holder suitable for confined work zones and multi-tool turrets. The moderate overall length of 150 mm balances reach and rigidity, allowing access to tight bores while maintaining sufficient tool support to resist chatter. For workshops where machine real estate is limited, the reduced envelope simplifies fixture design and minimises interference with neighbouring tools, helping to maintain uninterrupted production flow. Industrial-ready specification and easy integration With a nominal mass of 0.749 kg and a shank designation of M22- IR22, the holder integrates with common bar and turret systems used in turning centres. Compatibility with the 22 IR insert format provides access to a broad range of grades and geometries for steel, stainless and alloyed turning applications. The left-hand cutting direction and standard ISO form permit straightforward substitution in existing tool cycles without need for extensive programme changes. For further technical integration—such as verifying insert seat geometry or turret clamping—Metav Werkzeuge’s technical advisors can provide the necessary documentation and application support. Contact Metav Werkzeuge to specify the Clamp holder D513TM for left-hand turning operations and arrange tailored supply or technical guidance from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: D513TM Manufacturer: Teknik Makina SKU: D513TM ISO designation: SEL 2525 Compatible insert: 22 IR Shank designation: M22- IR22 Cutting direction: left Overall length: 150 mm Cutting head width: 25 mm Holder width: 25 mm Holder height: 25 mm Cutting height: 30 mm Weight: 0.749 kg FAQ Which insert types fit this holder? The clamp holder D513TM accepts 22 IR indexable inserts; Teknik Makina specifies the insert format for reliable seat fit and repeatability. What does left-hand cutting direction mean for machining? Left-hand cutting indicates the tool is intended for operations where the insert engages the workpiece in the opposite direction to right-hand tools; the D513TM’s left-hand orientation suits specific lathe setups and turning sequences. What are the principal dimensions to check for turret mounting? Key values for the D513TM are overall length 150 mm, cutting head 25 x 25 mm and cutting height 30 mm; these figures support integration planning for turrets and bar setups. Is the holder suitable for production use on CNC lathes? The D513TM is specified for industrial turning with standard interfaces (SEL 2525, shank M22- IR22) and a weight of 0.749 kg, making it appropriate for stable, repeatable production work. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 27 ER Innenkühlung Rechtsschneidend SER 2525 M27-ER27 Für 27 ER Wendeplatten - Teknik Makina
Benefit from precise, secure clamping with a compact 25 x 25 mm head and a 36 mm cutting height that supports ER27 indexable inserts; the SER 2525 design speeds set-up and reduces vibration for cleaner threads. Order directly via Metav Werkzeuge or consult our advisors for application guidance and rapid delivery. Clamping holder SER 2525 — Right‑hand external‑thread holder, 25 x 25 mm | Teknik Makina A robust clamping holder SER 2525 engineered for right‑hand external threading; compatible with ER27 indexable inserts and designed for use with M27‑ER27 shanks. Secure clamping for ER27 indexable inserts Compact 25 x 25 mm head profile Right‑hand external-thread orientation Torx T20 fastening with M5x18 screw Consistent thread quality through precise clamping The SER 2525 holder provides a stable tooling base that improves thread finish by reducing micro‑movement during cutting. The ER27 insert interface and rigid clamping geometry ensure repeatable positioning, which translates into fewer rejects and less rework. With a 36 mm cutting height, the design balances reach and stiffness so that standard external‑thread operations run more smoothly and predictably. Fast integration into existing toolholders and setups Designed for straightforward mechanical integration, the holder accepts a M27‑ER27 shank and measures 150 mm overall length, keeping tool projection manageable in typical lathes and turning centres. The slim 25 x 25 mm head and the Torx T20 fastening with M5x18 screw allow quick insert changes and secure clamping, while the modest mass (0.791 kg) minimises imbalance on rotating tooling systems. These measurable traits support faster set‑ups and lower machine idle time. Reliable operation and application guidance for workshops The right‑hand threading orientation and compatibility with 27 ER turning plates make this holder suitable for a wide range of external‑threading tasks in production and maintenance environments. Robust fastening minimises insert movement and improves operator confidence during extended cycles. If uncertainty remains about specific machining parameters or insert selection, technical advice is available from Metav Werkzeuge, whose supply reliability and broad product range support consistent workshop performance. Contact Metav Werkzeuge for application advice and to arrange prompt delivery from Emmerich — technical consultants are available to specify the right holder configuration for the workshop Technical data Article number: D491TM Brand: Teknik Makina eCl@ss: 21181004 Facts Head width: 25 mm Head height: 25 mm Cutting height: 36 mm Overall length: 150 mm Weight: 0.791 kg Torx key: T20 Torx screw: M5x18 Compatible inserts: 27 ER Shank designation: M27‑ER27 ISO designation: SER 2525 Cutting direction: right Special features U‑plate: TA064 Suited for outside threading (right) Files / documentation available Compact head for reduced overhang FAQ What insert type is compatible with this holder? The holder is compatible with 27 ER indexable inserts; the clamping geometry is matched to ER27 plate dimensions for secure seating. Is the holder suitable for right‑hand external threading? Yes, this clamping holder is configured for right‑hand external‑thread machining and is optimised for that cutting direction. Which shank/socket does the holder fit? It is intended for use with M27‑ER27 shank/toolholder arrangements and carries the ISO designation SER 2525. What fastening hardware is supplied or required? The holder uses a Torx T20 fastening system with an M5x18 screw for insert clamping; standard Torx tools facilitate quick maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 30° SEL 3232 P16- IR16 für 16 IR Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of secure clamping for 16 IR indexable inserts, combined with a left-hand cutting orientation and compact 32 mm head dimensions for improved rigidity in turning operations; order directly via Metav Werkzeuge or consult the technical team for integration advice. Clamping holder SEL 3232 (16 IR) — left-hand cutting by Teknik Makina A compact and robust Clamping holder SEL 3232 designed for indexable inserts of the 16 IR series, intended for left-hand turning on lathes and compatible boring-bar setups Compatible with 16 IR indexable inserts Left-hand cutting orientation 32 mm head height and width 170 mm overall length Improved process stability through secure clamping The holder provides secure clamping of 16 IR indexable inserts, delivering consistent seating and repeatable positioning during turning cycles. Designed with a low centre of gravity and a mass of 1.417 kg, the construction reduces chatter and improves surface finish by increasing rigidity at the cutting point. The clamping mechanism is straightforward and durable, making it suitable for routine production work and short-changeover maintenance procedures. This results in fewer re‑settings and more predictable tool life under stable cutting conditions. Compact dimensions that enhance rigidity and clearance Compact dimensions — a head height and width of 32 mm and an overall length of 170 mm — mean the holder combines stiffness with practical reach. The modest footprint minimises lever arm effects while retaining sufficient clearance for insert geometry and chip evacuation. A cutting height of 30 mm has been selected to match common toolpost and turret interfaces, helping to maintain the correct cutting line without additional shims. These measurements support efficient toolholders layouts where space and stability are both critical. Easy integration with existing tooling and workshop workflows Integration is simplified by the ISO designation SEL 3232 and compatibility with standard boring-bar interfaces such as P16- IR16. The left-hand cutting specification is clearly defined, avoiding installation errors in mixed-tool setups. The unit’s balanced weight and standardised dimensions permit straightforward mounting and predictable dynamic behaviour on CNC lathes and conventional machines alike. For workshops seeking dependable replacement holders or modular toolroom expansion, the product offers a low‑risk option backed by Metav’s quality filter and supply chain reliability. Contact Metav Werkzeuge in Emmerich for technical consultation and procurement of the Teknik Cutting Tools SEL 3232 clamping holder — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: D512TM Manufacturer: Teknik Makina SKU: D512TM Facts Overall length: 170 mm Head height: 32 mm Head width: 32 mm Cutting height: 30 mm Weight: 1.417 kg Special features ISO designation: SEL 3232 For indexable inserts: 16 IR Compatible boring bar: P16- IR16 Cutting direction: left FAQ Which insert size fits this holder? The holder accepts 16 IR indexable inserts; the SEL 3232 is designed specifically for that insert format. Is the cutting direction left or right? This model is configured for left-hand cutting; the SEL 3232 should be used where left-hand tool orientation is required. Which boring bars is the holder compatible with? Compatibility includes standard P16 interfaces such as P16- IR16, enabling direct mounting to matching boring bars. What are the key dimensions to check before fitting? Overall length 170 mm, head height 32 mm, head width 32 mm, cutting height 30 mm and weight 1.417 kg. Is this holder suitable for production use on CNC lathes? Yes, the SEL 3232 is designed for stable, repeatable clamping and is suitable for routine production work when used with the correct inserts and machine settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 36mm SEL 3232 P22- IR22 for 22 IR Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of the combination of precise clamping, compatibility with common indexable inserts and compact dimensions for reliable turning cycles in production and workshop environments; order the clamping holder directly via Metav Werkzeuge or consult their specialists for procurement and delivery. Klemmhalter D515TM — Left‑hand clamping holder for 22 IR indexable inserts by Teknik Makina Klemmhalter D515TM is a left‑hand clamping holder designed for side turning and lathe tool stations, suitable for industrial and workshop use with 22 IR indexable inserts Left‑hand cutting direction for side turning Compatible with 22 IR indexable inserts SEL 3232 ISO size designation 32 × 32 mm robust clamping dimensions Reliable grip for consistent turning results The clamping solution delivers a stable hold on indexable inserts, which reduces vibration and promotes repeatable part quality. The design accepts 22 IR format inserts and secures them with a form‑fitting seat, so chip geometry remains consistent from cut to cut. This results in improved surface finish and fewer rework cycles, translating into predictable machine uptime and lower total production costs. Familiar terminology such as indexable insert refers to a replaceable cutting tip that can be rotated or changed without replacing the whole tool, improving economy and flexibility in daily machining. Dimensions and mass engineered for workshop compatibility Key dimensions are optimised for common toolpost and turret configurations: 32 mm height, 32 mm width and an overall length of 170 mm, combining compactness with practical reach. The cutting height of 36 mm aligns the insert nose with standard turning centres, simplifying set‑up and avoiding offset errors. A mass of 1.434 kg provides the mechanical inertia needed to dampen chatter without excessive load on the turret. The holder is identified by the ISO reference SEL 3232, enabling quick cross‑referencing in tool lists and ensuring correct replacement parts and fixtures are chosen. Productivity through standardised compatibility Using standard insert sizes reduces tool inventory complexity and shortens changeover times. The holder accepts inserts indicated by P22- IR22, so replacement tips and spare parts are widely available across suppliers. Standardisation supports lean stocking and faster throughput: operators can keep a small range of inserts and still cover many turning tasks. For production planners, this translates into fewer line stoppages due to missing consumables and a more predictable procurement process. Straightforward integration and maintenance The holder is engineered for easy mounting and routine service. Its form and fitting simplify blade seating and clamp checks during shift changes; familiar handling procedures apply because the geometry follows common industrial conventions. Clear markings and the ISO designation make installation verification fast during tool changeovers, and the use of established insert types keeps maintenance predictable. Regular inspection of the clamping surfaces will preserve seating accuracy and extend service intervals, supporting a steady production rhythm. For procurement guidance or to reserve stock of the Teknik Makina D515TM clamping holder, contact Metav Werkzeuge in Emmerich—telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com for delivery options and technical advice Technical data Article number: D515TM Manufacturer: Teknik Makina Product name: Klemmhalter SKU: D515TM Core dimensions Height: 32 mm Width: 32 mm Cutting height: 36 mm Overall length: 170 mm Weight: 1.434 kg Compatibility & features For indexable inserts: 22 IR Compatible insert designation: P22- IR22 ISO designation: SEL 3232 Cutting direction: left FAQ What insert size does this holder accept? The holder accepts 22 IR indexable inserts; replacements labelled for 22 IR will fit the seating. Is the cutting direction right or left? This clamping holder is configured for a left cutting direction, suitable for left‑hand side turning operations. Which ISO size identifies the holder? The toolholder carries the ISO designation SEL 3232, used for reference and replacement matching. What are the main dimensions affecting fit‑up? Key dimensions are 32 mm height, 32 mm width, and 170 mm overall length, with a 36 mm cutting height. Can the holder be used in both workshop and production lathes? Yes; its standard dimensions and compatibility with 22 IR inserts make it suitable for both workshop toolposts and production turrets provided the machine accepts the stated dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 90° SER 2020 K16-ER16 for 16 ER Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the combination of reliable ISO designation SER 2020, precise compatibility with 16 ER indexable inserts, and compact dimensions for stable right‑hand external threading operations; order this clamping holder directly via Metav Werkzeuge or ask our consultants if needed. Clamping holder SER 2020 — right‑hand external threading, 125 mm overall length (Teknik Cutting Tools) A clamping holder SER 2020 built for right‑hand external threading on lathes and CNC turning centres, providing secure indexable‑insert mounting for efficient, repeatable turning operations. Right‑hand external threading configuration Compatible with 16 ER indexable inserts 125 mm overall length, 20 mm shank width Consistent cutting performance for industrial threading The SER 2020 clamping solution is designed for repeatable, high‑quality external threading with a right‑hand cutting direction. Its compatibility with 16 ER indexable inserts and the specified K16‑ER16 boring bar designation reduces setup complexity and shortens tool changeovers. With a cutting height of 30 mm and an even 20 mm shank, the assembly provides a predictable tool position that helps to maintain thread form and surface finish; this leads to fewer rejects and more efficient production cycles, especially in small to medium batch turning work. Robust fixing and serviceable components for dependable uptime A secure clamp and easy‑service hardware contribute to machine availability. The holder uses a Torx T15 key and an M3.5x11 Torx screw for insert retention, with a dedicated BSP010 shim and U‑plate TA061 for correct seating and alignment. The compact head dimensions (20 mm width) combined with a modest weight of 0.41 kg and 125 mm overall length deliver balanced dynamics at moderate speeds, reducing chatter and improving insert life. These mechanical details are chosen to simplify maintenance and ensure consistent clamping force across repeated insert changes. Practical suitability and application benefits in the workshop This holder suits turning shops that require a straightforward solution for right‑hand external threads where indexable inserts are preferred for quick service and cost control. The construction and ISO designation support compatibility across standard tooling setups, enabling integration into existing toolholders and fixtures without extensive rework. By favouring a standardised insert size and proven fastening components, the design helps to contain tooling stock and simplifies procurement, contributing to lower process complexity and steadier output quality. For precision right‑hand external threading, request the Teknik Cutting Tools SER 2020 clamping holder (SKU D502TM) from Metav Werkzeuge or consult our technical team at info@metav-werkzeuge.com / +49 2822 7131930 for application advice and order coordination Technical Data Article number / SKU: D502TM Manufacturer: Teknik Makina ISO designation: SER 2020 Compatible insert size: 16 ER Boring bar designation: K16‑ER16 U‑plate: TA061 Shim: BSP010 Torx key: T15 Torx screw: M3.5x11 Facts Overall length: 125 mm Shank width: 20 mm Cutting head width: 20 mm Cutting height: 30 mm Weight: 0.41 kg Cutting direction: right Special features For indexable inserts 16 ER Compatible with K16‑ER16 boring bar U‑plate TA061 included in compatibility list Shim BSP010 noted for seating Right‑hand external threading configuration ISO designation SER 2020 FAQ What insert size does this holder accept? The holder is specified for 16 ER indexable inserts, compatible with standard 16 ER threading and turning tips. Is the SER 2020 suitable for CNC lathes? Yes, the SER 2020 clamping holder (D502TM) is appropriate for use on CNC turning centres and conventional lathes when configured for right‑hand external threading. Which fastening and seating parts are involved with this holder? The design references a Torx T15 key, an M3.5x11 Torx screw for insert clamp, a BSP010 shim for seating and the U‑plate TA061 for correct plate support. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter links SEL 1616 H16- IR16 für 16 IR Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a compact design and precise ISO compatibility for reliable turning operations; the holder secures standard 16 IR indexable inserts with a 16 mm head and a 25 mm cutting height for stable machining. Order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. Teknik Makina — Clamping Holder SEL 1616 with 16 mm head and left-hand cutting The clamping holder by Teknik Makina is designed to hold 16 IR indexable inserts for left-hand turning applications on lathes, offering a standard ISO fit for efficient tool setup Secure grip for 16 IR indexable inserts Compact 16 mm head for tight toolposts Left-hand cutting direction for specialised turning 100 mm overall length with low 0.223 kg weight Reliable clamping for consistent turning results The solid ISO designation SEL 1616 ensures compatibility with the common 16 IR insert form, making the holder a pragmatic choice for systematic lathe setups. With a 16 mm head width and matching holder width, the geometry reduces play at the cutting edge and supports repeatable positioning. The visible 25 mm cutting height helps maintain accurate tool centreline alignment when pairing with typical toolposts, while the left-hand cutting orientation provides a direct mechanical solution for jobs requiring reverse-direction turning. These defined dimensions contribute to reduced setup iterations and predictable part tolerances. Faster changeovers and reduced downtime A straightforward clamping concept and compatibility with the H16-IR16 shank designation simplify insert mounting and replacement, speeding up changeovers. The holder’s 100 mm overall length and low mass (0.223 kg) lower inertia at the toolpost, which can help minimise vibration during light- to medium-duty turning. Reduced vibration supports a steadier cutting process and prolongs insert life, translating into cost-efficient cycles and fewer interventions for rework. The compact footprint also allows denser tool carousel layouts without sacrificing accessibility. Practical fit for modern workshops and maintenance routines Built to a clear industrial standard, the holder integrates into established tool inventories and supports predictable stock management. The left-hand cutting specification meets niche turning requirements without custom fabrication. For technical clarifications or to confirm machine compatibility, Metav Werkzeuge provides application advice and detailed information; this is especially helpful when consolidating tooling across a workshop. Metav’s position as a quality filter in Europe, backed by decades of precision experience and a broad product range, underpins reliable supply and consistent part quality when standardisation matters. Contact Metav Werkzeuge for technical advice and to arrange supply of the Teknik Makina clamping holder (D509TM) from our Emmerich stock Technical data Article number: D509TM Manufacturer: Teknik Makina ISO designation: SEL 1616 Dimensions & weight Overall length: 100 mm Holder height: 16 mm Head width: 16 mm Cutting head width: 16 mm Cutting height: 25 mm Weight: 0.223 kg Compatibility & features For indexable inserts: 16 IR Compatible shank/holder designation: H16-IR16 Cutting direction: left-hand FAQ Which insert size is compatible with this holder? The holder accepts 16 IR indexable inserts; the ISO designation SEL 1616 indicates the standard interface for insert mounting. Is this holder suitable for left-hand turning only? Yes, the toolholder is specified for left-hand cutting direction and is intended for reverse-direction turning tasks. What is the overall length and mass of the holder? Overall length is 100 mm and the mass is 0.223 kg, providing a compact and lightweight solution for tight tool setups. How does the SEL 1616 designation affect stock and compatibility? The SEL 1616 ISO designation ensures interchangeability with other tools and spares that follow the same standard, simplifying inventory and replacement procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Mini Stechklemmhalter - NFTG 14 Wendeplatten D09 K30 L110 S16 Innenkühlung Rechtsschneidend - Teknik Makina
Compact design and assured clamping make this tool ideal for tight turning and grooving tasks; the combination of a 16 mm shank and 30 mm cutting height delivers secure seating and consistent chip control. Order the Mini Grooving Clamp Holder directly via Metav Werkzeuge or consult our advisors for application support and rapid delivery. Mini Grooving Clamp Holder K803TM — 16 mm shank, compatible with NFTG 14 inserts The Mini Grooving Clamp Holder K803TM is a compact clamp designed for precision grooving and parting on small to medium lathes, offering a space-saving solution for confined tool posts. Compact holder with 16 mm shank Compatible with NFTG 14 indexable inserts 30 mm cutting height for small parts Overall length 110 mm for tight setups Secure clamping in restricted spaces for accurate results The compact construction of this clamp holder prioritises reliable seating and repeatability. With a 16 mm shank and a reduced footprint, the tool is tailored for operations where space is limited but precision remains essential. The clamping system has been engineered to maintain a stable cutting position, which reduces vibration and supports consistent groove geometry — a direct benefit when machining narrow features or small-diameter workpieces. Purpose-built for grooving and parting with industry inserts Designed to accept NFTG 14 indexable inserts, the holder provides a standardised platform for grooving and parting tasks. The compatibility with Korloy insert formats ensures straightforward sourcing and interchangeability. For workshops that rely on indexable tooling, this arrangement simplifies inventory and allows a fast changeover between insert grades and geometries without altering the holder setup. Quick fitment and pragmatic workshop efficiency The holder’s 110 mm overall length and modest mass (0.12 kg) make it simple to integrate into existing tool posts and quick-change systems. Its S16 ISO designation indicates the shank interface, facilitating correct seating in collets or toolholders designed for a 16 mm diameter. The compact weight and length reduce tool overhang, improving rigidity and enabling higher stability when performing fine grooving operations on compact components. Compatibility, serviceability and operational benefits Beyond dimensional suitability, this clamp holder supports efficient maintenance routines: standard insert types speed up replacement, and the straightforward clamping mechanism reduces downtime during changeover. The 30 mm cutting height positions the insert accurately relative to the axis, aiding in consistent chip evacuation and predictable tool life. For production environments where repeatability and minimal set-up time matter, the holder delivers a pragmatic balance between size and function. For tailored advice or to reserve the Teknik Cutting Tools Mini Grooving Clamp Holder (K803TM) for the workshop, contact Metav Werkzeuge in Emmerich — rapid dispatch and technical consultancy are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: K803TM Name: Mini Grooving Clamp Holder Facts Shank diameter: 16 mm Cutting height: 30 mm Overall length: 110 mm Weight: 0.12 kg Diameter: 9 mm Special features Compatible inserts: NFTG 14 Suitable for Korloy inserts Shank designation: S16 Clamping holder designation: D09 K30 L110 FAQ Is this holder compatible with Korloy inserts? Yes. The holder accepts NFTG 14 indexable inserts and is specified to be suitable for Korloy insert types. What shank size is required for mounting? The holder uses an S16 interface, corresponding to a 16 mm shank diameter for correct mounting. Can the clamp holder be used for parting-off on small lathes? Yes. Its compact design and 30 mm cutting height make it suitable for precision parting and grooving in confined setups. What are the key dimensions to check before ordering? Key figures: shank diameter 16 mm, overall length 110 mm, cutting height 30 mm, and weight 0.12 kg for consideration in the machine setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Mini Stechklemmhalter 49mm - S20 D14 K49 L160 für D14 Wendeplatten Innenkühlung - Teknik Makina
Take advantage of a compact holder that combines a 20 mm shank with compatibility for D14 indexable inserts and a 49 mm cutting height to ensure stable grooves and reduced vibration during turning; order directly via Metav Werkzeuge or consult our specialists for application advice. Mini parting and grooving tool holder K816TM — 20 mm shank, for D14 inserts — Teknik Makina A Mini parting and grooving tool holder designed for precise parting and grooving operations on lathes, suitable for standard D14 indexable inserts and compact setups Compact 20 mm shank for reduced overhang Accepts D14 indexable inserts 49 mm cutting height for secure insert seating 160 mm overall length for flexible reach Precision where space is limited The compact design with a 20 mm shank reduces overhang and helps to minimise chatter in confined setups, which translates into improved surface finish and longer insert life. The small footprint is beneficial on secondary toolposts and smaller lathes where rigidity matters more than length. The combination of a short, rigid shank and a lightweight (0.367 kg) construction provides a measurable stability gain during groove and parting operations without sacrificing accessibility for narrow workpieces. Built for standard inserts and secure clamping Compatibility with D14 indexable inserts simplifies tooling logistics: common insert sizes mean easier stock management and quicker changeovers. The 49 mm cutting height ensures the insert sits at the correct centreline when paired with common toolholders and adaptors; this reduces set-up time and the risk of incorrect insert height. The shank designation S20 indicates a standardised mounting form that supports repeatable alignment and straightforward replacement of the holder in modular setups. Practical dimensions that increase workshop versatility An overall length of 160 mm provides a balance between reach and rigidity, making the component suitable for a wide range of grooving and parting tasks on both compact and mid-size lathes. The nominal outer diameter 14 mm and the defined insert interface are engineered for straightforward integration into established turning processes. The modest mass keeps dynamic loads low, which is advantageous when rapid traverses or quick index changes are required. Efficiency gains and trusted supply from Metav Using a compact grooving holder reduces cycle times by improving tool stability and cutting consistency, which contributes to less scrap and fewer insert changes over a production run. Metav’s offering ensures this holder is available alongside complementary tooling, enabling a consolidated procurement process. If a specific application requires verification, the Metav team offers technical guidance to match holder geometry to machine and insert choice for predictable production results. Contact Metav Werkzeuge for tailored advice on the Teknik Makina Mini parting and grooving tool holder K816TM and to arrange immediate supply from Emmerich by phone or email Technical data Article number: K816TM Manufacturer: Teknik Makina Designation: Mini parting and grooving tool holder Shank designation: S20 Shank diameter: 20 mm Insert size: D14 Cutting height: 49 mm Overall length: 160 mm Outer diameter: 14 mm Weight: 0.367 kg Core dimensions Shaft diameter: 20 mm Cutting height: 49 mm Overall length: 160 mm Insert diameter: 14 mm Weight: 0.367 kg Features and compatibility For D14 indexable inserts Shank type: S20 Designed for parting and grooving operations Compact, lightweight design FAQ Which insert size is compatible with this holder? The holder accepts D14 indexable inserts, which are industry standard for many grooving and parting applications and simplify insert sourcing. What is the shank diameter and why does it matter? The 20 mm shank ensures a rigid connection in compact toolposts and helps to reduce vibration compared with smaller-diameter alternatives. Is the cutting height suitable for standard lathe setups? Yes, the 49 mm cutting height is intended to achieve correct insert centreline in common lathe tool arrangements when used with matching adaptors. What is the overall length and how does it affect use? With an overall length of 160 mm, the holder balances reach and stiffness for versatile use on compact to mid-size lathes. Can the holder be used for both internal and external grooving? The holder is engineered for grooving and parting tasks; suitability for internal grooving depends on the specific machine and setup dimensions Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Mini Stechklemmhalter 5.9mm D5.9 K20 L080 S16 NFTG 08, Shaft Ø16mm, Cut Height 20mm, Overall Length 80mm - Teknik Makina
Benefit from a compact holder that pairs rigid clamping with precise insert compatibility — ideal for confined turning operations; its S16 shank and 80 mm length support stable setup and repeatable results. Order the Mini Stechklemmhalter directly via Metav Werkzeuge or consult the technical team if required. Mini parting clamping holder (Mini Stechklemmhalter) – S16 shank, compatible with Korloy NFTG 08 (Teknik Makina) The Mini parting clamping holder (Mini Stechklemmhalter) is a compact clamping tool for precise grooving and parting applications, designed to accept Korloy NFTG 08 indexable inserts and to be mounted on S16-compatible tool posts. Compact design for confined spaces S16 shank for rigid mounting Compatible with Korloy NFTG 08 inserts Precise rigidity in a reduced footprint for stable turning results The compact construction delivers rigid clamping despite a small envelope, which reduces chatter in confined setups. With a 16 mm shank (S16) and 80 mm overall length, the holder is dimensioned for tight tool layouts while maintaining the necessary stiffness for accurate groove and part-off cuts. This balance of size and stability supports shorter setup times and consistent workpiece finish. Designed for quick, reliable insert handling to save machining time Insert retention is engineered to secure NFTG 08 indexable tips reliably, enabling repeatable positioning and fast insert change during production. The unit’s cutting height 20 mm aligns insert geometry with common tool lines, so clamping adjustments are minimised and process reproducibility is improved. The lightweight construction (approx. 0.143 kg) eases handling during tool changes without compromising stability. Practical benefits for workshop logistics and tool selection Compatibility with Korloy inserts and a clear ISO shank designation (S16) simplifies procurement and tool planning; the holder reduces the need for multiple full-length tools in compact turning stations. The defined dimensions — diameter 5.9 mm at the cutting interface and specified shank measures — make it straightforward to check fixture fit and to standardise tooling across similar lathes and setups. For compact, high-precision grooving and parting, contact Metav Werkzeuge to secure the Teknik Makina Mini Stechklemmhalter (SKU K801TM) and confirm insert compatibility for specific applications. Technical Data Article number: K801TM Manufacturer: Teknik Makina Product: Mini parting clamping holder (Mini Stechklemmhalter) Suitable insert manufacturer: Korloy Suitable insert type: NFTG 08 Shank designation ISO: S16 Facts Shank diameter: 16 mm Cutting height: 20 mm Overall length: 80 mm Diameter: 5.9 mm Weight: 0.143 kg Features Compatible inserts: NFTG 08 Compatible insert manufacturer: Korloy Clamping rod designation: D5,9 K20 L080 SKU: K801TM Manufacturer brand: Teknik Makina FAQ Which inserts fit this clamping holder? The holder is designed for Korloy NFTG 08 indexable inserts; the geometry and clamp position accommodate the NFTG 08 form for reliable seating. What shank size is required for mounting? Mounting requires an S16 shank-compatible tool post; the holder’s 16 mm shank ensures a tight fit on standard S16 fixtures. Is the holder suitable for confined turning arrangements? Yes — the compact overall length of 80 mm and reduced envelope make this holder appropriate for tight layouts where space is limited. How does the clamping affect repeatability? The clamping concept provides rigid retention of the insert, which supports consistent positioning and repeatable cutting performance across tool changes. What is the product reference for ordering? Order under SKU K801TM; the full product name is Mini parting clamping holder (Mini Stechklemmhalter) by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Mini Stechklemmhalter 6mm D06, S16 D06 K11 L078, For D06 Wendeplatten, Innenkühlung, Rechtsschneidend - Teknik Makina
Take advantage of a compact, clamp-style holder that combines a 16 mm shank and an 11 mm cutting height for precise grooving and parting on small lathes; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Mini grooving clamping tool holder K814TM — 16 mm shank, 11 mm cutting height (Teknik Makina) The Mini grooving clamping tool holder K814TM is a compact clamp-type toolholder engineered for accurate grooving and parting operations on small to medium-sized lathes. Compact 16 mm shank for restricted toolposts Compatible with D06 indexable inserts 11 mm cutting height for standard insert seating 78 mm overall length for tight working envelopes Precision performance for tight turning tasks The K814TM delivers focused cutting action through a rigid, clamp-style design that stabilises the insert during grooving and parting. With a 16 mm shank and 11 mm cutting height, the holder aligns standard D06 inserts at the correct datum to reduce vibration and tool chatter. This results in consistent groove geometry and improved surface finish. The technical layout of the holder ensures repeatable positioning, which is particularly valuable when switching inserts or restoring tool setup between jobs. Secure clamping and insert compatibility that saves setup time A simple yet effective clamping mechanism accepts D06 indexable inserts and works with the manufacturer designation D06 K11 L078, ensuring a secure fit and predictable cutting edge height. The clamp action is designed to maintain cutting-edge stability without complex adjustments, lowering setup time between operations. Compatibility with common insert geometries means fewer specialised spares in the tool cabinet and easy replacement during routine maintenance. Space-saving design for workshop efficiency Weighing just 0.082 kg and measuring 78 mm overall length, this compact toolholder is ideal where space is limited — bench lathes, toolposts with small envelopes or multi-station turrets. The 6 mm working diameter and slim profile make it suitable for intricate grooving tasks and for jobs where access is constrained. The reduced mass also minimises centrifugal load at higher spindle speeds, supporting stable cutting when paired with correct inserts and feeds. Practical supply and workshop support from Metav Sourced from Teknik Makina and available through Metav Werkzeuge, the holder benefits from straightforward logistics and a broad catalogue of compatible tools. Metav’s distribution from Emmerich combines a wide product range with dependable fulfilment, making this compact toolholder an efficient addition to production lines and repair shops. The combination of small form factor, standardised insert acceptance and reliable supply contributes to uninterrupted workflow in everyday machining. Contact Metav Werkzeuge for tailored mounting advice and immediate dispatch from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K814TM Name: Mini grooving clamping tool holder Manufacturer: Teknik Makina Facts Shank diameter: 16 mm Cutting height: 11 mm Overall length: 78 mm Weight: 0.082 kg Working diameter: 6 mm Shank designation (ISO): S16 Special features Compatible with indexable inserts D06 Insert designation reference: D06 K11 L078 Clamp-type grooving/parting holder Compact design for small toolposts FAQ What insert size fits this holder? The holder accepts D06 indexable inserts; the reference designation on the tool is D06 K11 L078, which ensures proper seating and cutting height for typical grooving inserts. Is the toolholder suitable for small lathes and toolposts? Yes — with a 16 mm shank, 78 mm overall length and low weight (0.082 kg), the K814TM is intended for compact toolposts and restricted working envelopes. What cutting height is achieved with this toolholder? The toolholder positions the insert at an 11 mm cutting height, matching standard insert geometries to simplify setup and maintain repeatable tool datum. Can this holder be used for parting as well as grooving? The clamp-style design and insert compatibility make it suitable for both grooving and parting operations where the insert geometry and cutting parameters are selected appropriately. Which brand manufactures the holder and where is it sourced from? The holder is manufactured by Teknik Makina and is supplied via Metav Werkzeuge under article number K814TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Mini Toolholder 20mm M6 88mm, Clamping Holder - Teknik Makina
Take advantage of a compact design with secure M6 clamping and a 6 mm shank interface to keep parting and cut‑off operations precise and repeatable; order the item directly via Metav Werkzeuge or consult the specialists for application support. Mini parting tool holder DC334TM — compact 20 mm body, M6 clamping (Teknik Makina) The Mini parting tool holder is a compact clamp intended for precision cut‑off and grooving tasks on smaller lathes, offering a slim 20 mm body for tight toolposts and a standard 6 mm shank interface for common micro tools Compact 20 mm body for tight toolposts 6 mm shank interface for standard micro tools M6 clamping thread for secure fixation 88 mm overall length, weighs 0.227 kg Compact design that preserves toolpost space while improving stability The small footprint of this holder reduces obstruction on the turret and allows closer tool spacing without sacrificing rigidity. Built as a purpose‑made clamp for parting operations, the 20 mm outer diameter and slim profile mean that precision can be maintained even in dense tool arrangements. The holder’s form factor supports accurate alignment, which in turn reduces chatter and extends insert life — a measurable productivity gain for series and single‑piece production. Secure clamping and straightforward mechanical interface for reliable cuts A dedicated M6 clamping thread provides a consistent clamping force while the 6 mm shank interface ensures compatibility with standard micro tool shanks. This combination of thread and shank dimensions was selected to balance accessibility and holding power, enabling reliable parting actions with reduced risk of slippage. The mechanical simplicity also minimises maintenance requirements and makes the holder suitable for repetitive industrial use. Easy integration into existing setups with clear dimensional data With an overall length of 88 mm and a nominal weight of 0.227 kg, the holder slots into compact turning centres without significant changes to balance or machine dynamics. These specific dimensions allow production planners and tooling engineers to calculate centre‑to‑centre distances and clearance envelopes quickly. The concise geometry supports a rapid tool change routine and helps standardise tooling racks across smaller‑scale turning applications. Purpose and users: where this holder adds measurable value Engineered for workshops, small industrial cells and precision maintenance work, the clamp is ideal where space is limited but cutting quality must remain high. The construction suits repetitive parting and grooving where consistent alignment and firm clamping reduce scrap rates. As a robust, no‑frills component it complements broader clamping systems and supports efficient workflows in trade and light industry environments. Contact Metav Werkzeuge for technical advice on the Teknik Cutting Tools Mini parting tool holder (DC334TM) — Metav Werkzeuge holds stock in Emmerich and can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DC334TM Manufacturer: Teknik Makina Dimensions & weight Diameter: 20 mm Overall length: 88 mm Shank interface: 6 mm Thread: M6 Weight: 0.227 kg Features Compact parting tool holder Suitable for 6 mm shanks M6 clamping thread for secure fixation ECLASS: 21181005 FAQ Is the holder suitable for standard micro tool shanks? The holder accepts a 6 mm shank interface, so standard 6 mm micro tool shanks are compatible with the DC334TM parting tool holder by Teknik Makina. Which thread is used for clamping and fixation? Clamping is achieved via an M6 thread; the M6 fixation ensures steady clamping forces for cut‑off operations. What are the overall dimensions and mass of the component? The holder has a 20 mm body diameter, an overall length of 88 mm and a weight of 0.227 kg as specified for the DC334TM. Can the holder be used in compact toolposts on small lathes? Yes, the compact 20 mm body is designed to fit tight toolposts and dense tool arrangements typical of small lathe setups. Is the DC334TM suitable for repeated industrial use? The simple, robust design with M6 clamping and a 6 mm shank interface supports repetitive parting work and is intended for workshop and light industrial applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Mini-Stechklemmhalter - Teknik Makina
Take advantage of the compact construction and secure M6 clamping for stable, repeatable parting operations — the compact profile and 7 mm shank ensure easy integration into tight toolposts; order the holder directly via Metav Werkzeuge or ask our consultants for machine-specific advice. Mini parting tool holder DC340TM — compact clamp with M6 thread, 20 mm diameter (Teknik Makina) The Mini parting tool holder DC340TM is a compact clamp designed for precise parting and grooving tasks on small lathes and turning centres Compact 88 mm length for tight toolposts 7 mm shank diameter for small toolholders M6 thread for secure clamping 20 mm outer diameter for stable support Save space without sacrificing rigidity The compact 88 mm overall length is engineered to fit tight toolposts and crowded turrets, making the holder especially useful where clearance is limited. Its reduced physical footprint improves access to the workpiece and simplifies multiple-tool setups, while the 20 mm diameter body provides a stable contact surface that minimises lateral play. For workshops seeking efficient layout and faster tool changes, this low-profile design contributes to shorter setup times and a neater workstation. Consistent clamping for repeatable cuts The clamping mechanism, secured via an M6 thread, provides positive axial tightening that translates into reliable tool retention and repeatable cutting results. Paired with the 7 mm shank, the construction ensures a firm bearing in small toolholders and minimises micro-movements during parting operations. This mechanical stability supports consistent cutting depths and surface finishes, reducing scrap rates and the need for frequent rework — a practical efficiency gain for production and prototyping alike. Built for small turning tasks and versatile use Designed with light-duty lathes and fine-turning tasks in mind, the holder is suited to parting and grooving applications where precision matters more than raw cutting force. The low-mass assembly facilitates controlled engagement with the workpiece and helps maintain alignment when working on narrow shoulders or delicate components. As a compact clamping option, it integrates into setups that require accuracy and agility rather than heavy material removal. Lightweight design that curbs vibration and eases handling At approximately 0.219 kg, the holder offers a low-inertia solution that reduces vibrational tendencies compared with bulkier alternatives. Lower mass contributes to calmer tool behaviour during short, precise cuts and helps protect fragile inserts or narrow parting blades. Additionally, the modest weight improves manual handling during tool changes, allowing quicker, safer adjustments when optimising cutting position or replacing consumables. For supply and expert advice on Teknik Makina's DC340TM, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery from our European stock Technical data Article number: DC340TM Designation: Mini parting tool holder Manufacturer: Teknik Makina Weight: 0.219 kg Core dimensions Overall length: 88 mm Diameter: 20 mm Shank diameter: 7 mm Thread: M6 Special features Mini parting tool holder design Compact, low-mass construction Threaded clamping for secure retention FAQ Which machines is this holder suited for? The DC340TM mini parting tool holder by Teknik Makina is intended for small lathes and compact turning centres where space is limited and precise parting or grooving is required. How is the cutting tool secured in the holder? Clamping is achieved via an M6 threaded fastener on the DC340TM, providing a tight axial clamp that ensures secure retention of a parting blade or small cutter. What shank size is required for the toolpost? The holder uses a 7 mm shank, so toolposts and collet systems accepting that diameter are compatible with the DC340TM. Can this holder be used for both parting and grooving? Yes — the mini clamp design is suitable for controlled parting and narrow grooving operations where precision and low interference are essential. Does the weight contribute to tool stability? With a mass of 0.219 kg, the holder has reduced inertia which helps lower vibration during short, precise cuts and improves handling during tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Mini-Stechklemmhalter - Teknik Makina
Take advantage of a compact holder that delivers secure clamping with a small footprint: the combination of a 20 mm clamping diameter, M6 thread and an overall length of 88 mm supports stable parting and grooving setups while keeping tool overhang to a minimum; order directly via Metav Werkzeuge or consult their specialists for application advice. Mini parting clamp holder DC316TM — mini parting tool holder, 20 mm diameter, M6 thread (Teknik Makina) A compact Mini parting clamp holder DC316TM engineered for precise clamping of parting inserts in confined turning applications. Compact design for confined machining spaces 20 mm clamping diameter for small tools M6 threaded attachment for secure fixing Lightweight 0.222 kg reduces tool overhang Stable clamping for precise parting operations The mini parting clamp holder is designed to deliver consistent clamping force in delicate turning tasks. With a defined 20 mm clamping diameter and an M6 threaded fixing, the holder secures the insert reliably while keeping vibrations low. The combination of these measurable features supports repeatable cuts and controlled tool engagement, which is particularly relevant in small-lathe production where stability directly affects surface finish and dimensional accuracy. Space-efficient form that simplifies workshop setup A reduced overall length of 88 mm and a small shank diameter of 4 mm enables installation in compact tool posts and limited-tooling environments. This space-saving geometry shortens the distance between the cutting edge and the turret, lowering the bending moment and helping to maintain tool alignment. The relatively low mass of 0.222 kg further minimises dynamic load on the machine carriage, contributing to smoother cuts and reduced risk of chatter in sensitive operations. Clear compatibility for straightforward integration Mounting and mechanical integration are facilitated by the standard M6 thread and a 4 mm shank interface, which match common small-lathe tool posts and adaptors. The SKU DC316TM identifies the exact specification for procurement and inventory management. Where clarity is required for fixture selection, these numeric values provide a verifiable basis for cross-checking fitment with existing tooling and quick adaptation in mixed-equipment shops. Practical handling and maintenance benefits The simple mechanical design focuses on low-maintenance operation: the standard thread connection allows secure fastening without specialised tooling, and the compact size reduces the number of handling steps when setting up a new workpiece. These operational efficiencies shorten changeover times and contribute to a steady workflow in workshops that prioritise throughput and reproducible results. Contact Metav Werkzeuge for tailored application support and fast supply of the DC316TM mini parting clamp holder from Emmerich—technical consultants are available to advise on fitment and compatibility Technical data Article number: DC316TM Product name: Mini-Stechklemmhalter Manufacturer: Teknik Makina Facts Diameter: 20 mm Thread: M6 Overall length: 88 mm Shank / mounting diameter: 4 mm Weight: 0.222 kg Special features Compact parting clamp holder Standard M6 attachment Small shank for confined tool posts FAQ What size of clamping diameter does this holder provide? The holder features a 20 mm clamping diameter, specified for the Mini parting clamp holder DC316TM to support small tooling. Which thread is required for mounting this clamp holder? Mounting uses an M6 thread; the DC316TM is supplied with this standard connection for secure fastening. Is the holder compatible with small-lathe tool posts? Yes, the 4 mm shank and M6 thread make the DC316TM suitable for many compact tool posts and adaptors used in small-lathe environments. How does the overall length affect setup? An overall length of 88 mm reduces tool overhang and helps maintain stiffness during parting operations with the DC316TM. What is the weight of the clamp holder and why is it relevant? The weight is 0.222 kg; lower mass reduces carriage load and can improve dynamic stability in fine-turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, reliable parting and grooving for precision turning
Parting and grooving tools, also referred to as parting blades, grooving tools or cut-off tools, are narrow carrier tools for lathes fitted with replaceable carbide inserts. Supplied as solid holders or flat blades, they are designed to cut precise grooves and to part finished components cleanly from the material bar.
Why internal coolant matters for deep cuts and tough materials
When used in simple form without internal coolant, the cutting fluid is applied via external machine nozzles; this is often sufficient for very shallow grooves and easily machinable materials. For deeper grooving and parting operations, however, the tool nearly encloses the slot so that external coolant cannot reach the cutting edge. Tools with internal coolant incorporate fine, integrated channels that deliver coolant under high pressure directly to the insert and beneath the chip. This targeted supply controls the intense heat in the confined cutting zone and uses flushing pressure to eject chips reliably, preventing chip jamming, surface damage and sudden tool breakage.
Clear operational benefits you can measure
- faster cycle times through reliable chip evacuation and uninterrupted cutting
- extended tool life thanks to effective heat control at the cutting edge
- consistent surface finish by avoiding chip re-cutting and scarring
- safer machining of hard or ductile materials due to reduced risk of tool fracture
- simplified setup when holders with integrated channels replace complex external coolant rigs
Metav as a practical partner for your workshop
Metav stands for democratisation of precision: decades of expertise, a quality filter in Emmerich and an assortment that supports industry and trade. With more than 48,000 customers and a catalogue of over 250,000 products, Metav provides a focused selection of parting and grooving tools, accessories and matched holders so that procurement and technical choice remain straightforward and dependable.
Parting and grooving tools bring reliable groove geometry and safe parting to turning operations; choosing holders with integrated coolant channels is essential for deep cuts and demanding materials. If technical advice is needed, Metav’s product specialists can help select the appropriate tool geometry and coolant configuration for the application.
FAQ
When is internal coolant necessary for parting tools?
Internal coolant becomes necessary for deep grooving and parting or when machining hard or ductile materials; it delivers coolant directly to the insert and beneath the chip, which is critical when external nozzles can no longer reach the cutting edge.
Can parting tools be used without internal coolant?
Yes — for very shallow cuts and easily machinable materials, parting tools can be used with external machine coolant nozzles, but performance and tool life will drop markedly for deeper cuts.
How do parting tools prevent dangerous chip jamming?
Parting tools with integrated channels use high-pressure coolant to flush chips out of the narrow slot, preventing chips from becoming trapped and minimising the risk of surface damage and abrupt tool failure.
What should be considered when choosing a grooving insert and holder?
Select a combination that matches the required groove depth and material grade; holders offering integrated high-pressure channels are preferred for deep cuts or poor-chip-breaking materials to ensure heat control and reliable chip evacuation.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com