Reliable drilling performance with Standard Line twist drill
Standard Line twist drill and standard drills deliver consistent, precision holemaking for daily industrial and workshop use, combining durable high-speed steel construction with precision-ground flutes to ensure excellent runout and chip evacuation. Designed for machining unalloyed and low-alloy steel, cast iron, sintered metal, plastics and non-ferrous metals, these drills provide a balanced mix of wear resistance and hole quality for routine production and maintenance tasks. Ideal for workshops, maintenance departments and assembly plants, the system offers a dependable, cost-effective solution between entry-level and heavy-duty ranges, featuring an optimised 118° point for good penetration and centring. Key advantages include precision-ground construction, excellent chip evacuation and consistent hole quality.
1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Die Kombination aus HSS-Material, kurzer Ausführung und einem Durchmesser von 1 mm liefert hohe Stabilität und präzise Bohrungen in Metall. Nutzen Sie die Bruchminderung durch rollgewalzte Fertigung und die Normkonformität nach DIN 338 für zuverlässige Ergebnisse. Für Bestellungen oder technische Beratung steht Metav als Ansprechpartner bereit. Spiralbohrer 40010-FDA von MetavCUT (HSS, Typ N, kurz) Spiralbohrer 40010-FDA bietet eine kompakte Lösung für präzise Metallbohrungen bei stationären Anwendungen und feinen Werkstücken. MetavCUT Spiralbohrer 40010-FDA HSS-Material für hohe Elastizität Kurze Ausführung für maximale Stabilität Typ N: Normalspirale für Metall Spitzenwinkel 118° für gutes Zentrierverhalten Hohe Stabilität für präzise Metallbohrungen Die kurze Bauform dieses Bohrers reduziert die Auskraglänge und erhöht dadurch die Stabilität bei der Bearbeitung von Stahl und Guss. Durch die rollgewalzte Verarbeitung bleibt die Schneide elastisch, was insbesondere bei kleinen Durchmessern das Bruchrisiko verringert. Anwender profitieren von engeren Toleranzen und sauberer Spanführung, was die Nachbearbeitung minimiert. Materialeigenschaften und Fertigungsnormen sichern Verlässlichkeit Das HSS-Material (Schnellarbeitsstahl) kombiniert Zähigkeit und Verschleißfestigkeit und eignet sich für legierten und unlegierten Stahl sowie Nichteisenmetalle. Die Konformität zur DIN 338 garantiert die Abmessungs- und Toleranzfestlegung für kurze Spiralbohrer mit Zylinderschaft. Der Einsatz dieses Werkstoffs ermöglicht längere Standzeiten bei üblichen Schnittbedingungen. Geeignete Anwendungen und Einsatzempfehlungen Mit einem Durchmesser von 1 mm ist der Bohrer ideal für Präzisionsarbeiten wie feine Entlastungsbohrungen, Modellbau und Leiterplatten mit hohen Genauigkeitsanforderungen. Wegen der Empfindlichkeit kleiner Durchmesser wird das Bohren in Handgeführten Maschinen nicht empfohlen; stationäre, gut ausgerichtete Werkzeugmaschinen liefern deutlich stabilere Ergebnisse und reduzieren Bruchrisiken. Bedienhinweise und Spitzenwinkel verstehen Der Spitzenwinkel von 118° unterstützt das einfache Anbohren und ist besonders vorteilhaft bei dünneren oder weichen Metallen. Für härtere Werkstoffe empfiehlt sich ein größerer Winkel oder ein spezieller Werkstoff. Vorzugsweise wird mit angemessener Kühlschmierstoffzufuhr gearbeitet, um Wärmeentwicklung zu minimieren und die Standzeit der Schneide zu erhöhen. Empfehlung: Für präzise Metallbohrungen die ausgezeichnete Qualität von MetavCUT nutzen und den Spiralbohrer 40010-FDA direkt über Metav beziehen oder technische Rückfragen per eMail an info@metav-werkzeuge.com bzw. telefonisch unter +49 2822 7131930 klären. Technische Daten Artikelnummer: 40010-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Norm: DIN 338 Daten Durchmesser: 1 mm Gesamtlänge: 34 mm Spirallänge: 12 mm Spitzenwinkel: 118° Besonderheiten Material: HSS (Schnellarbeitsstahl) Typ: Typ N (Normalspirale) Ausführung: kurz Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Verpackungseinheit: 10 FAQ Für welche Materialien eignet sich dieser Bohrer am besten? Der MetavCUT Spiralbohrer 40010-FDA aus HSS ist ausgelegt für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoff, wobei bei härteren Werkstoffen ein angepasstes Schneidstoffkonzept sinnvoll sein kann. Ist der Bohrer für Handgeführte Maschinen geeignet? Wegen des geringen Durchmessers von 1 mm wird die Arbeit an stationären, exakt ausgerichteten Maschinen empfohlen; Handgeführte Maschinen erhöhen das Risiko von Verkantungen und Bruch. Welchen Vorteil bietet die kurze Ausführung nach DIN 338? Die kurze Ausführung reduziert die Auskragung, steigert die Stabilität und verringert Schwingungen, was besonders bei feinen Bohrungen zu verbesserten Ergebnissen führt. Welche Pflege verlängert die Standzeit des Bohrers? Kühlmittelzufuhr, moderate Schnittgeschwindigkeiten und regelmäßiges Nachschleifen bei Verschleiß erhöhen die Standzeit des HSS-Bohrers 40010-FDA deutlich.
1mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Fehlinformation: Der angegebene Durchmesser von 1 mm fällt in den Mikro-Bereich (0,05–2,0 mm), der gemäß den Produktempfehlungen nicht für handgeführte Maschinen geeignet ist. Gleichzeitig ist im Datensatz die Angabe "fur_bohrmaschine: Handbohrmaschine" vorhanden, was diesem Ausschluss widerspricht. Diese Diskrepanz zwischen den Produktempfehlungen und den Angaben im Datensatz könnte zu Verwirrung führen und sollte genauer überprüft werden. Es ist wichtig, dass die Informationen konsistent und klar sind, um Missverständnisse oder potenzielle Fehler bei der Anwendung des Produkts zu vermeiden. Eine Anpassung der Daten oder eine genauere Erklärung wäre hier sinnvoll.
2.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, Diameter 2.1 mm, Point Angle 118°, Black, DIN 338 The Twist Drill Type N is a short High Speed Steel metal drill designed for precise drilling with a Hand Drill in workshop and maintenance applications. Short HSS design for high stability 118° point angle for easy centring 2.1 mm diameter for precise metal holes Conforms to DIN 338 for reliable quality Accuracy and Stability for Precision Metalwork Designed as a short Spiral Length configuration, this Twist Drill delivers improved Stability and minimal deflection during use. The combination of Diameter 2.1 mm and Point Angle 118° ensures accurate entry and a clean bore in typical metalworking tasks. Because the shorter Overall Length reduces overhang, users benefit from greater concentricity and less chatter when working with handheld or benchtop machines. This results in consistent hole geometry and less rework for professional and hobby workshops alike. Durable High Speed Steel for Reliable Performance Manufactured from HSS (High Speed Steel), the tool is optimised for standard metal drilling tasks where toughness and the ability to withstand elevated cutting temperatures matter. The low-temperature production method makes the material more elastic, reducing the risk of breakage when drilling smaller diameters under 6 mm. For operators this means a drill that can be resharpened if necessary and remains dependable when cutting alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and many Plastics. Practical Application and Who Benefits This Twist Drill is tailored for Metal applications and is particularly suited to craftsmen, maintenance technicians and small workshop operators who use a Hand Drill or portable Drilling Machine. The short execution gives an advantage for confined spaces and for tasks requiring precise guidance. Users seeking a classic Type N metal drill will appreciate the balance of ease of use and robustness, making it a go‑to choice for routine drilling where accuracy is required. Conformance to DIN 338 and Design Advantages Compliant with DIN 338, the short variant of the Twist Drill is defined for cylindrical shank HSS drills and targets stable, high‑precision machining on rotating machines and portable equipment. The chosen 118° Point Angle favours centring on curved or softer surfaces and reduces initial walking, while the short design improves rigidity. For tougher materials or when faster penetration is needed, larger point angles are available, but for general metalworking the standard 118° offers a reliable compromise between centring and cutting efficiency. MetavCUT recommends the Type N Twist Drill for precise metal drilling — for technical advice or to confirm suitability contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40021-FDA Diameter: 2.1 mm Point Angle: 118° Type: Type N Colour: Black Execution: Short Spiral Length: 24 mm Overall Length: 49 mm For Drill Machine: Hand Drill Material: HSS (High Speed Steel) Norm: DIN 338 Application: Drills for Metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for machining higher‑strength materials and larger drilling tasks in Metalworking. It is especially suitable for drilling Alloyed and Unalloyed Steel, Cast Iron, Non‑Ferrous Metals and many Plastics. The short HSS construction allows easier resharpening and offers good resistance to breaking, making it a reliable choice for workshop and maintenance applications. Which three drill types exist and where does the Twist Drill fit? There are three common drill types: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill Type N belongs to the Metal drill category and is optimised for general metal drilling tasks with a cylindrical shank and HSS material.
2.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
MetavCUT Twist Drill – Short HSS‑E, 2.1 mm, 118° Tip, Type N, 5% Cobalt‑alloyed, Fully Ground Shank, DIN 338 The MetavCUT Twist Drill is a short, high‑performance Twist Drill designed for precision metalworking with drilling machines and hand drills. Short design for higher stability 2.1 mm diameter for precision holes 118° tip for clean entry in soft metals HSS‑E with 5% cobalt for increased wear resistance Fully ground shank for high runout accuracy Exceptional wear resistance for demanding metalwork Made from HSS‑E with 5% cobalt, this short Twist Drill delivers improved Wear Resistance and edge stability when machining steels and other hard metals. The cobalt alloy increases red hardness so the drill maintains cutting performance at higher temperatures, reducing tool changes during batch operations. This translates into longer tool life and fewer interruptions in production. Short length for higher stability and precise holes The reduced overall length and shorter protruding flute of this short design result in less deflection and a more rigid setup. That stability improves concentricity and produces precise Holes even when working with tougher materials or in less rigid chucks. For applications where runout and bending must be minimised, the compact geometry gives a clear advantage in repeatable hole quality. Ground shank and DIN 338 compliance for consistent results A fully ground Shank ensures excellent Runout Accuracy and reliable seating in the chuck, while the DIN 338 classification confirms the product meets standardised dimensions and tolerances for short twist drills. The Type N normal spiral geometry is the classic solution for metal drilling, balancing chip evacuation and cutting action. The 118° tip angle aids entry and centring on slightly curved or soft metal surfaces, producing clean starts. Target users and recommended applications This short Twist Drill is intended for metalworkers, maintenance technicians and workshop environments that require accurate, repeatable holes in alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. Use with adequate coolant and appropriate spindle speeds to maximise life. For handheld use or on drilling machines the combination of HSS‑E metallurgy and compact form factor is particularly beneficial for precision maintenance tasks and small‑batch production. Strong recommendation: choose the MetavCUT short Twist Drill for demanding metal drilling tasks — for technical advice or to confirm suitability for your application, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47021-FDA Diameter: 2.1 mm Overall length: 49 mm Spiral length: 24 mm Tip angle: 118° Type: Type N Material: HSS‑E Execution: Short Cobalt content: 5% cobalt-alloyed Shank: Fully ground For drilling machine: Drilling Machine (Hand drill) Model series: Standard Line Norm: DIN 338 Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily used for machining metal; as a short Twist Drill it is especially suited to precise holes in alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics in both workshop and maintenance environments. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category designed for metalworking applications. Can a metal drill be used in wood and how does the MetavCUT Twist Drill perform? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and surface finish are generally inferior compared with dedicated wood drills; metal drills are easier to resharpen and show less self‑feed, so they can be used for simple wood tasks but with reduced precision. Why is the 118° tip used and what benefit does it bring for the MetavCUT Twist Drill? The 118° tip reduces the aggressiveness of the cutting edge and improves centring on slightly curved or softer surfaces; for the MetavCUT Twist Drill this contributes to cleaner starts and easier penetration in softer metals while maintaining acceptable chip formation.
2.1mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N extra short, 2.1 mm, 118°, HSS‑G, Bright Finished, DIN 1897 An extra‑short Twist Drill (Type N) designed for Drilling Machines and Hand Drills, offering a 2.1 mm Diameter and a 118° Tip Angle for precise, low‑force metalworking. Extra‑short HSS‑G Twist Drill for tight spaces 2.1 mm Diameter for precise pilot holes 118° Tip for reliable centering in soft materials Cylindrical Shank fits standard three‑jaw chucks DIN 1897 standard; bright finished for durability Faster Drilling with Less Force and Higher Stability The MetavCUT Type N Twist Drill uses a ground HSS‑G geometry that reduces friction and delivers up to 40% faster drilling compared with conventional HSS tools. This results in lower operator effort and reduced heat build‑up, especially when working with steel and cast materials. The extra short design increases torsional stability and lowers the risk of Breakage, making it particularly suitable for tight setups or thin‑walled components where control is critical. Customers benefit from shorter cycle times and a more consistent Hole Quality. Compact Design That Excels in Confined Workspaces Where access is limited, the extra short length of this Twist Drill provides a clear advantage. Shorter Overall Length and reduced flute length mean improved Rigidity and less Whipping, so holes remain true even when working in awkward positions or with Hand Drills. The Cylindrical Shank allows universal chuck clamping and quick tool changes, which supports efficient workshop workflows and reduces set‑up time for repetitive tasks. Broad Material Compatibility and Clear Application Guidance This Type N Twist Drill is optimized for metalworking: it is suitable for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics. For users less familiar with drill types: Type N denotes a Normal Spiral suited for Metal; it is not intended as the first choice for very soft materials like wood where specialist bits offer cleaner guidance. When precise centering is required on curved surfaces, the 118° Tip Angle helps start the Hole with low point‑load and reduced surface wandering. Practical Handling, Sharpening and Durability The HSS‑G Material provides a balance of Hardness and Toughness; it is easy to Regrind, which extends Tool Life and allows maintenance of a sharp Cutting Edge in‑house. The bright finished surface supports corrosion resistance and visual inspection of wear. Because the Shank is smooth and cylindrical, users should ensure correct Chuck Torque and regular inspection to prevent slippage under high loads. For frequent heavy‑duty applications, consider matching drive methods and clamping systems to the task to maximise performance. Who Benefits from This Tool Professionals and hobbyists who require compact, reliable drilling performance in metalworking environments will appreciate the combination of extra rigidity and ease of use. The MetavCUT Type N Twist Drill is particularly suited for workshops doing precision pilot holes, maintenance tasks, and any operation where space constraints or thin materials demand a short, robust cutter. Choose the MetavCUT Type N Twist Drill for precise metal drilling — for expert advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 56021-FDA Type: Type N Diameter: 2.1 mm Total Length: 38 mm Spiral Length: 12 mm Tip Angle: 118° Material: HSS‑G Shank: Cylindrical Finish: Bright finished Execution: Extra short Application: Drills for Metal Standard: DIN 1897 Series: Standard Line For Drill Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A Twist Drill like the MetavCUT Type N Twist Drill is primarily used for machining high‑strength materials and for larger hole diameters where tool robustness is essential. This design is straightforward to Regrind and endures greater loads, making it suitable for demanding Metalworking operations. Which 3 drill types are there? In practice three common drill categories exist: Metal Drill, Wood Drill and Stone/Concrete Drill. The MetavCUT Type N Twist Drill belongs to the Metal Drill group and is engineered for performance in metallic materials. Can the MetavCUT Type N Twist Drill be used with hand drills? Yes, the MetavCUT Type N Twist Drill is suitable for Hand Drills and Drilling Machines when clamped securely in a compatible Chuck. Its Extra‑short design improves stability under manual operation and reduces the risk of Breakage in confined setups. Why are Twist Drills pointed? Pointing the tip reduces the cross‑cut at the tip, which lowers friction and therefore requires less Feed Force. A well‑sharpened tip also improves Centering and helps the Drill begin the hole cleanly in the workpiece.
2.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT verbindet HSS-Material, DIN‑338‑Norm und Typ‑N‑Spirale zu einer robusten Lösung für präzise Metallbohrungen; die geringe Auskraglänge sorgt für hohe Stabilität und reduziert Bruchrisiken bei kleinen Durchmessern, während die 118° Spitzengeometrie ein sicheres Anbohren ermöglicht. Bestellen Sie das Werkzeug direkt über Metav oder kontaktieren Sie unsere Beratung bei Bedarf. Spiralbohrer – kurzer HSS‑Bohrer für Metall von MetavCUT Der Spiralbohrer von MetavCUT ist ein kurzer, DIN‑338‑konformer HSS‑Bohrer für präzise Arbeiten in Stahl, Gusseisen und Nichteisenmetallen. Spiralbohrer »kurz« nach DIN 338 HSS‑Material für Stahl, Gusseisen und Nichteisen Typ N Normalspirale für Metallbohrungen 2,25 mm Durchmesser, hohe Stabilität beim Bohren Zylinderschaft für Handbohrmaschine geeignet Höhere Stabilität durch kurze Ausführung und HSS‑Werkstoff Die kurze Ausführung reduziert die Auskraglänge und minimiert dadurch Vibrationen sowie das Verbiegen des Werkzeugs. Durch den Einsatz von HSS (Schnellarbeitsstahl) bleibt der Bohrer elastisch, was besonders bei kleinen Durchmessern das Bruchrisiko senkt. Die Typ N‑Normalspirale gewährleistet eine sichere Spanabfuhr bei typischen Metallanwendungen und macht dieses Werkzeug zur verlässlichen Wahl für Werkstatt und Produktion. Für den täglichen Werkstattbetrieb optimiert Der Bohrer eignet sich im Standard‑Bereich (2,0–13,0 mm) ideal für Arbeiten mit Handbohrmaschine und stationären Maschinen. Anwender profitieren von schneller Materialdurchdringung in dünnen bis mittleren Blechen sowie Aluminium und Kunststoff. Zur Erzielung hoher Genauigkeit empfiehlt sich vor dem Bohren das Anpunkten mit einem Zentrierbohrer; bei sehr tiefen Bohrungen ist mehrstufiges Aufbohren ratsam, da Standardspiralen bei extremen Tiefen an Grenzen stoßen. Spitzengeometrie und Anwendungsempfehlungen Die 118° Spitzengeometrie ist besonders für weichere bis mittlere Werkstoffe vorteilhaft, da sie das Zentrieren erleichtert und die Anbohrphase verkürzt. Rollgewalzte Fertigung erhöht die Zähigkeit des Werkstoffs und verringert Mikrorisse in der Bohrerspitze. Für härtere Stähle oder spezielle Anforderungen kann eine andere Spitzengeometrie sinnvoll sein; bei Standardaufgaben bietet diese Ausführung jedoch ein ausgewogenes Verhältnis aus Standzeit und Spanabfuhr. Praxistipps für saubere Bohrbilder und längere Standzeit Bei Metallbohrungen empfiehlt sich die Verwendung von Kühlschmierstoffen oder Schneidöl, um Wärmeentwicklung zu reduzieren und die Spanabfuhr zu verbessern. Kleine Durchmesser wie 2,25 mm sollten mit hoher Drehzahl und moderatem Vorschub bearbeitet werden; übermäßiger Druck erhöht das Bruchrisiko. Werkstück sicher spannen und exakte Aufnahme verwenden, um Rundlauffehler zu vermeiden und gleichbleibend saubere Bohrbilder zu erhalten. Entscheiden Sie sich für die Präzision von MetavCUT: den kurzen HSS‑Spiralbohrer (SKU 400225‑FDA) für zuverlässige Metallbohrungen – bei Fragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erreichbar. Produktmerkmale Artikelnummer: 400225-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Material: HSS Norm: DIN 338 Typ: Typ N Farbe: schwarz fur_bohrmaschine: Handbohrmaschine Werte Durchmesser: 2,25 mm Gesamtlänge: 53 mm Spirallänge: 27 mm Spitzenwinkel: 118° Besonderheiten Ausführung: kurz Material: HSS (Schnellarbeitsstahl) Norm: DIN 338 (kurze Spiralbohrer) Typ: Typ N (Normalspirale) Farbe: schwarz Anwendung: Bohrer für Metall fur_bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 FAQ Für welche Materialien ist der Bohrer geeignet? Der Spiralbohrer von MetavCUT ist für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe ausgelegt; die Kombination aus HSS‑Material und Typ N‑Spirale sorgt für zuverlässige Spanabfuhr bei typischen Metallanwendungen. Eignet sich der Bohrer für den Einsatz in Handbohrmaschinen? Ja, der kurze Zylinderschaft und die Konstruktion nach DIN 338 machen den Spiralbohrer von MetavCUT gut geeignet für Handbohrmaschine und mobile Werkzeuge bei normalen Werkstattaufgaben. Wie tief kann mit dem 2,25 mm Bohrer sicher gebohrt werden? Als Faustregel gilt: direkte Bohrungen sind für den Standardbereich geeignet; bei sehr tiefen Löchern sollte das 5‑fache des Durchmessers als Orientierung nicht deutlich überschritten werden oder mehrstufiges Aufbohren erfolgen, um Spanabfuhr und Standzeit zu gewährleisten. Was bedeutet die Norm DIN 338 konkret für die Anwendung? DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft und legt Maße sowie Ausführungen fest; für den Anwender heißt das: reproduzierbare Aufnahmen, geeignete Schaftform und definierte Geometrie für typische Metallbearbeitungen. Wie sollte der Bohrer gekühlt und gepflegt werden? Verwendung von Schneidöl oder Kühlmitteln verlängert die Lebensdauer; kleine Durchmesser wie 2,25 mm sollten mit hoher Drehzahl und moderatem Vorschub betrieben werden, und Bruchrisiken lassen sich durch schonende Handhabung und richtige Aufnahme minimieren.
2.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill – Type N short, 2.2 mm, 118° tip, HSS, DIN 338, black (MetavCUT) The Twist Drill (Type N short) is a precision HSS metal drill designed for stable, accurate drilling in steels and non‑ferrous materials with a 2.2 mm diameter and a 118° tip angle. Short design for higher stability and precision Roll‑formed HSS for elasticity and reduced breakage risk Conforms to DIN 338 for short cylinder‑shank twist drills Ideal for metal drilling with hand drills and drilling machines Robust HSS construction for reliable metalworking results Made from HSS (High Speed Steel), this short Twist Drill from MetavCUT offers elasticity that reduces the risk of breakage, especially for small diameters. The roll‑forming production method enhances toughness for standard metalworking tasks and makes the tool suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics. This material choice translates directly into longer tool life and predictable performance during repetitive drilling operations. Short geometry that improves rigidity and accuracy A shorter overall length reduces the unsupported overhang and therefore the tendency to deflect, delivering greater stability and improved hole accuracy in demanding setups. Built to the DIN 338 specification for short cylinder‑shank twist drills, the compact execution is advantageous when working on bench machines or when a hand‑held drilling machine must maintain a tight tolerance. The Type N spiral provides the familiar flute geometry optimized for metal. Tip geometry and flute length that aid centring and chip evacuation The 118° tip angle supports reliable centring on softer metals and eases initial penetration; this tip geometry also keeps feed forces moderate and improves guidance on curved surfaces. With a flute (spiral) length of 27 mm and a total length of 53 mm, chip evacuation is efficient for typical metal drilling tasks while keeping the tool rigid. These features reduce chatter and help produce cleaner, more consistent holes with minimal rework. Who benefits and how to get the best results Metalworkers, maintenance technicians and precision hobbyists will appreciate the balance of toughness and precision offered by this short Twist Drill. For best results, use appropriate cutting speeds, steady feed and cutting fluid when drilling metals; secure the workpiece firmly and avoid excessive cantilever to maintain accuracy. For questions about suitability, speeds or matching drill holders, METAV Werkzeuge provides technical advice and selection support. Strong recommendation from MetavCUT: choose this Type N short Twist Drill for precision metal drilling—METAV Werkzeuge offers expert consultation if unsure about specifications or application via eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40022-FDA Diameter: 2.2 mm Tip angle: 118° Type: Type N Colour: black Execution: short Material: HSS Standard: DIN 338 Spiral length: 27 mm Total length: 53 mm Application: Drills for metal For drill machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is this Twist Drill best used for and which materials suit it? The Twist Drill from MetavCUT (Type N) is primarily intended for metalworking; it performs well in alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics, offering a good combination of toughness and cutting performance. Can the MetavCUT Twist Drill Type N be used in a hand drill? Yes, the MetavCUT Twist Drill (Type N short) is suitable for use with hand drills and drilling machines; its compact length reduces flex and improves hole quality when a secure fixture and correct speed are used. For what is a Twist Drill used? A Twist Drill is mainly applied to machining high‑strength materials and larger drill diameters; its geometry is easy to sharpen and tolerates higher loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drill, wood drill and stone/concrete drill; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking. Why are twist drills pointed? Pointing the tip of a Twist Drill reduces the cross‑cut at the tip, which lowers friction and thus the required feed force while improving centring and initial penetration into the workpiece. Can you drill wood with a metal Twist Drill? A metal Twist Drill from MetavCUT can be used in wood, but guidance is poorer and finish is less clean compared with dedicated wood bits; however, metal drills are easier to resharpen and have a lower tendency to self‑feed.
2.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, 2.2 mm, 118° point angle, 5% cobalt‑alloyed HSS‑E, DIN 338, fully ground The Twist Drill Type N short is a precision metal‑drilling tool designed for Drilling Machines, offering high stability and reliable performance in demanding metalworking applications. Short design for higher stability and precision 5% cobalt‑alloyed HSS‑E for hard metals Fully ground shank for excellent concentricity 118° point angle improves centring on curved surfaces DIN 338 compliant for short twist drills Robust Material for Longer Tool Life and Harder Materials The HSS‑E composition with 5% Cobalt increases heat resistance and wear performance compared with conventional high‑speed steels, enabling longer service life when machining alloyed and unalloyed steel. Because the substrate material is designed for elevated temperatures, the bit maintains hardness during sustained cutting, which reduces flank wear and the need for frequent replacement. This makes the short Twist Drill particularly suitable when material hardness and repeatable hole quality are priorities. Short Design That Boosts Accuracy and Reduces Deflection A reduced overall length and shorter protruding section result in a lower tendency to bend under load, delivering improved straightness and hole roundness. For precision tasks on a Drilling Machine, the short format keeps vibration and chatter to a minimum, so holes are cleaner and reaming or finishing steps are often reduced. The roll‑or‑grind manufacturing choice ensures consistent geometry; the fully ground variant provides especially sharp cutting lips and high runout accuracy. Geometry and Cutting Behaviour Adapted for Metalwork With a 118° Point Angle and classic Type N spiral, this drill is optimised for typical Metal drilling operations. The point geometry aids in centring on slightly curved or uneven surfaces while reducing the risk of walking. For users unfamiliar with terms: the point angle describes the acute tip shape that controls penetration and chip formation; a larger angle like 118° balances entry ease with a robust cutting edge suited to steels and non‑ferrous alloys. Ground Shank and DIN 338 Compliance for Machine Use The Fully Ground shank guarantees tight concentricity in chucks and collets, translating to reduced runout and longer life of both the tool and the spindle. Conformity with DIN 338 signals adherence to standard dimensions and tolerances for short Twist Drills with cylindrical shank, facilitating straightforward tool selection and replacement in industrial and workshop inventories. For stationary and portable drilling equipment, this predictability simplifies setup and quality control. Intended Applications and Who Benefits Most Engineers, maintenance technicians and metalworking professionals will find the short Twist Drill Type N advantageous for tasks requiring precise, repeatable holes in steels, cast iron, non‑ferrous metals and many plastics. The combination of cobalt alloying and a short flute length makes this drill particularly effective for smaller diameters where stability under higher cutting speeds is essential. Choose this variant where accuracy and tool life under demanding conditions are more important than deep or through‑hand drilling. For technical questions or to confirm suitability for a specific material or machine, METAV Werkzeuge provides expert advice: info@metav-werkzeuge.com — Phone +49 2822 7131930 — WhatsApp +49 170 2837271. We recommend the MetavCUT short Twist Drill Type N for precision metalworking; contact METAV Werkzeuge for personalised guidance and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930. Designation: Twist Drill Brand: MetavCUT SKU: 47022-FDA Diameter: 2.2 mm Spiral length: 27 mm Overall length: 53 mm Point angle: 118° Type: Type N Execution: short Colour / Alloy: 5% cobalt‑alloyed Shank execution: fully ground Material: HSS‑E Application: Drills for metal Model series: Standard Line Norm: DIN 338 For drilling machine: Drilling Machine Manufacturer contact: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill Type N short from MetavCUT? The MetavCUT Twist Drill Type N short is primarily used for machining metal; its short design and HSS‑E composition make it well suited to drilling alloyed and unalloyed steel, cast iron and non‑ferrous metals on both stationary and portable Drilling Machines. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill Type N short can be used in a Hand Drill or other Drilling Machine, but best results are achieved with stable clamping and appropriate cutting speed and coolant for metalworking. For what are Twist Drills used? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters. This form is relatively simple to resharpen and withstands higher loads, making it suitable for workshop and industrial metal applications. Which three drill types exist? The primary drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross‑cut at the drill point, which lowers friction and required feed forces while improving centring in the workpiece, resulting in cleaner holes and less tool stress. Can a metal drill be used for wood? A Metal Drill like the MetavCUT Twist Drill can be used in Wood, but it provides poorer guidance and a less clean finish than dedicated wood drills. Metal drills are easier to resharpen and exhibit lower self‑feeding tendencies.
2.2mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill (Type N) – 2.2 mm, 118° tip, Extra Short, Bright Finished, HSS‑G, DIN 1897 — MetavCUT The Twist Drill (Type N) is an extra‑short HSS‑G metal drill designed for handheld and angle drilling, offering a 2.2 mm diameter with a 118° tip angle for improved centring and reliable performance in thin materials. Extra‑short design for greater stability HSS‑G material for durable cutting 118° tip improves centring on curved surfaces Cylindrical shank fits standard drill chucks Complies with DIN 1897, Type N spiral Greater stability and faster drilling in metalworking The extra short geometry reduces overhang and increases torsional stiffness, so drilling with less chatter and a lower breakage risk is achievable even under hand‑held conditions. Made from HSS‑G, this bit combines heat‑resistance and toughness so that cuts remain sharp longer; users benefit from up to 40% faster penetration and reduced required feed force compared with standard HSS bits. This makes the tool particularly efficient for working with alloyed and unalloyed steels where consistent, repeatable holes are required. Reliable handling in confined spaces and on portable machines Designed for use with a Drilling Machine and especially suited to Hand Drills and Angle Drills, the bit’s Cylindrical shank ensures compatibility with standard three‑jaw chucks and simple, secure mounting. The short overall length makes accessibility in narrow or recessed areas much easier, allowing clean boreholes in thin sheets and profiles. For professionals and hobbyists who regularly face limited working room, the compact shape reduces operator fatigue and improves control. Tip geometry and spiral type for precise centring The 118° tip angle offers a good balance between cutting aggressiveness and centring behaviour; for softer materials such as aluminium and certain plastics the wider angle helps the drill start cleanly without wandering. As a Type N (normal spiral) configuration, the flute geometry is optimised for metalworking chips evacuation while maintaining a robust cutting lip. An explanation for less experienced users: the tip angle determines how quickly the drill bites into the material and how well it centres on curved or uneven surfaces. Standards, suitability and maintenance benefits Manufactured to DIN 1897 specifications within the Standard Line, this bit is intended for general metal drilling tasks including steel, cast iron and non‑ferrous metals. Its short, robust form is ideal for drilling into thin components like sheet metal and profiles where longer drills would flex. The HSS‑G composition allows economical resharpening, extending service life and lowering lifecycle costs for workshops that maintain their own tooling. We strongly recommend the MetavCUT Twist Drill Type N for precision metalwork; for technical guidance or to confirm suitability for your application, contact METAV Werkzeuge’s expert team by e‑mail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 — METAV Werkzeuge offers comprehensive, competent consultation to help you choose the right tool for the task. Twist Drill Brand: MetavCUT SKU: 56022-FDA Diameter: 2.2 mm Total length: 38 mm Spiral length: 12 mm Tip angle: 118° Type: Type N Execution: extra short Finish/Colour: bright finished Shaft execution: Cylindrical Material: HSS‑G Standard: DIN 1897 For drill machine: Drilling Machine (Hand Drill) Application: Drills for metal Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill (Type N) suitable for? The MetavCUT Twist Drill Type N is optimised for metalworking: it performs well in alloyed and unalloyed steels, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics; its HSS‑G composition ensures heat resistance and long cutting life when used under appropriate speeds and lubrication. Can the MetavCUT Twist Drill (Type N) be used in a handheld drill? Yes, the MetavCUT Twist Drill Type N with its extra short design and Cylindrical shank is suitable for Hand Drills and Angle Drills; the compact length improves stability and accessibility, though correct clamping in a three‑jaw chuck and suitable drilling parameters are important to avoid slippage. For what are Twist Drills used? Twist Drills are primarily applied to the machining of high‑strength materials and larger hole diameters. Their shape makes them easy to resharpen and able to withstand higher loads; they are commonly used where robustness and repeatable performance are required. Which 3 drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills.
2.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill (Type N) – Short HSS, 2.3 mm, 118°, Black, DIN 338 A Twist Drill (Type N) short design for precise metal drilling with a 2.3 mm Diameter and 118° Tip Angle. HSS material for reliable metal drilling Short design according to DIN 338 for stability 118° Tip for rapid penetration on softer metals Suitable for Drilling Machine and Hand drills Black finish reduces glare and improves handling Stable short design for higher precision and less deflection The short overall length and reduced overhang of this Twist Drill increase rigidity and reduce the risk of bending during drilling operations. Users benefit from more consistent hole geometry and longer tool life because the shorter protrusion from the Chuck minimizes vibration. This stability is especially valuable when working with harder metals where deflection would otherwise spoil tolerances and require costly rework. The design supports precise, repeatable results on production and workshop tasks. HSS material and DIN 338: durability explained for everyday use Manufactured from HSS (High Speed Steel) and produced to DIN 338 for short cylindrical shank drills, this tool combines toughness with grindability. For non‑specialists: HSS retains hardness at elevated temperatures, allowing reliable cutting when drilling Steel, Cast Iron, Non‑ferrous Metals and Plastics. DIN 338 classifies the short execution and ensures consistent dimensions and quality. The Type N spiral provides the standard flute geometry optimized for metalworking and straightforward resharpening when required. Optimised for metalworking tasks and common machines This Type N Twist Drill has been developed for drilling metal with hand drills and drilling machines, offering a balanced compromise between penetration rate and centring ability thanks to its 118° tip. It is well suited for general metal fabrication, maintenance and workshop repairs where consistent hole quality matters. Professionals and hobbyists alike profit from the drill’s predictable behaviour on a range of ferrous and non‑ferrous materials and from the ease of integration into existing tooling assortments. Safe handling, sharpening and machine advice for reliable results Correct seating in the Chuck, steady feed and appropriate cutting speed significantly extend service life. The shortened flute length lowers chatter but requires attention to coolant and swarf evacuation on deep holes. If regrinding is necessary, the classic Type N geometry is easy to re‑sharpen, restoring cutting edges and maintaining centring. For guidance on cutting speeds, clamping or resharpening, contact METAV Werkzeuge; expert advice reduces downtime and avoids incorrect use that shortens tool life. Choose the MetavCUT Twist Drill Type N 2.3 mm short HSS for precise metalwork — contact METAV Werkzeuge for personal technical consultation and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 40023-FDA Diameter: 2.3 mm Tip Angle: 118° Material: HSS (High Speed Steel) Execution: Short Type: Type N Spiral Length: 27 mm Overall Length: 53 mm Norm: DIN 338 Colour: Black Suitable for: Drilling Machine / Hand Drill Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is designed primarily for metalworking and performs well on alloyed and unalloyed Steel, Cast Iron and many Non‑ferrous Metals as well as suitable Plastics; its HSS composition helps maintain cutting performance at elevated temperatures during continuous drilling. How should I care for and resharpen a MetavCUT Twist Drill? A MetavCUT Twist Drill Type N can be resharpened on a bench grinder following the original point geometry; maintenance includes correct seating, controlled feed and coolant use to reduce heat. For process settings or resharpening advice, METAV Werkzeuge offers competent support. What is a Twist Drill used for? A Twist Drill is mainly applied when working on high‑strength materials and for larger drill diameters. Its shape is easy to grind and it withstands significant loads. Which three drill types exist? The three main drill types are Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills split-pointed? Splitting the point reduces the web at the tip of the Twist Drill. By regrinding the point, friction forces are significantly lowered, which reduces required feed forces and improves centring of the drill in the workpiece. Can a Twist Drill be used to drill wood? A Metal drill can also be used in Wood, but guidance and finish are worse. Metal drills are easier to regrind and have less self‑feed, so results are less clean compared with dedicated Wood drills. For which drilling depths is the Twist Drill the most used tool? A through hole is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool.
2.3mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N, Ø 2.3 mm, 118° tip, Extra Short, Bright Finished, HSS-G, DIN 1897 (MetavCUT) The Twist Drill Type N is an extra-short HSS-G drill bit designed for precision metal drilling with hand and angle drilling machines. Extra-short design for greater stability High-speed HSS-G for fast metal drilling 118° tip for easier centring on curved surfaces Cylindrical shank fits standard three-jaw chucks Conforms to DIN 1897 for consistent quality Precision and Strength for Metalworking Designed for efficient metal removal, the Twist Drill from MetavCUT combines a HSS-G cutting material with a ground geometry that allows faster penetration and reduced operator effort. The ground HSS geometry reduces required feed force compared with conventional HSS, making drilling smoother and more controlled. This results in fewer deflections and cleaner holes when working in alloyed and unalloyed steels, cast iron, sintered iron and non-ferrous metals. Stable Short-Length Design for Confined Spaces The extra-short execution significantly improves rigidity: a shorter overall and flute length reduces the lever arm and thus the risk of breakage under lateral loads. This makes the bit particularly suitable when access is limited, or when drilling thin-walled components such as sheets and profiles. The compact geometry increases torsional resistance and supports steady drilling in workshop and maintenance applications. Compatibility, Tip Geometry and Practical Effects With a 118° tip angle, the Type N geometry eases centring on slightly curved surfaces and suits softer metals as well as general workshop use. The cylindrical shank fits standard three-jaw chucks, offering universal compatibility with most hand and angle drilling machines. The Type N normal spiral is optimised for metalworking and produces reliable chip removal and hole quality in common ferrous and non-ferrous materials. Who benefits from this Twist Drill Small workshops, maintenance technicians, and hobbyists benefit from the robust construction and versatile application range of this MetavCUT drill. The combination of extra-short length, HSS-G material and conformity to DIN 1897 makes it a practical choice for repetitive metal drilling tasks where stability and hole accuracy are required. METAV Werkzeuge provides expert advice if there is any uncertainty about suitability for a specific application. For precision metal drilling choose the MetavCUT Twist Drill Type N — METAV Werkzeuge offers detailed technical support and personalised advice via info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 56023-FDA Diameter: 2.3 mm Spiral length: 12 mm Overall length: 38 mm Tip angle: 118° Type: Type N Material: HSS-G Execution: Extra short Shaft execution: Cylindrical Finish/Colour: Bright finished Standard: DIN 1897 For use in: Drilling Machine (Handbohrmaschine / angle and hand drills) Model series: Standard Line Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is optimised for metalworking: it is suitable for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non-Ferrous Metals and Hard Plastics; this makes it a reliable choice for workshop and industrial applications. Can the Twist Drill be used in handheld drills? Yes, the MetavCUT Twist Drill Type N with a Cylindrical shank is intended for Hand and Angle Drilling Machines and can be clamped in standard three-jaw chucks; its Extra Short design improves stability in handheld operations. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high-strength materials and larger hole diameters; this form is easy to regrind and withstands higher loads. Which three drill types exist? There are three common drill categories: Metal drill, Wood drill, and Stone/Concrete drill. Why are Twist Drills sharpened (pointed)? The sharpening reduces the cross cutting edge at the tip of the Twist Drill, lowering friction forces and therefore the required feed force while improving tip centring in the workpiece. Can a metal drill be used to drill wood? A metal drill can also be used in wood, but accuracy and guidance are inferior compared with dedicated wood drills; metal drills are easier to regrind and exhibit less self-feeding. For which drilling depths is the Twist Drill most commonly used? A solid hole is typically made with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common assumption that HSSE steels are always superior to HSS is not universally true; choose based on actual working conditions to determine whether the higher investment in HSSE is justified.
2.4mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Präzise Metallbohrungen gelingen dank der Kombination aus hoher Stabilität durch die kurze Bauform und der Elastizität des HSS-Werkstoffs; für Fragen und Bestellungen steht Metav als verlässlicher Partner bereit. Bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung per E‑Mail oder Telefon an. Spiralbohrer »40024-FDA« von MetavCUT (HSS, Typ N, 2,4 mm, kurz) Spiralbohrer »40024-FDA« von MetavCUT für effiziente Metallbohrungen an Handbohrmaschinen und stationären Maschinen, kurz ausgeführt für erhöhte Stabilität und präzise Zentrierung HSS-Material: hohe Elastizität und Bruchsicherheit Kürzere Auskraglänge für bessere Stabilität DIN 338-konform: kurze Spiralbohrer mit Zylinderschaft Typ N Normalspirale, ideal für Metallbearbeitung Passend für Handbohrmaschine und stationäre Maschinen Stabilität und Materialqualität für dauerhafte Präzision Der kurz ausgeführte Spiralbohrer ist aus HSS gefertigt, wodurch eine Kombination aus Zähigkeit und Verschleißfestigkeit entsteht. Die rollgewalzte Fertigung reduziert Mikrorisse und erhöht die Elastizität, was insbesondere bei Durchmessern unter 6 mm das Bruchrisiko senkt. Diese Material- und Fertigungswahl sorgt für Stabilität beim Einspannen im Bohrfutter und für gleichbleibende Präzision auch bei häufigem Gebrauch. Geeignet für die Metallbearbeitung in Werkstatt und Produktion Als Ausführung nach DIN 338 ist der Bohrer speziell als kurzer Spiralbohrer mit Zylinderschaft klassifiziert und damit vorgesehen für die Bearbeitung von legiertem und unlegiertem Stahl, Gusseisen, Nichteisenmetallen und Kunststoffen. Die Typ N Normalspirale unterstützt das schnelle Spanmanagement bei üblichen Werkstoffen und macht den Bohrer zur geeigneten Wahl für Werkstattarbeiten, Montage und anspruchsvolle DIY-Projekte. Praxistauglichkeit und Anwendungsempfehlungen Mit einem Durchmesser von 2,4 mm und einer Gesamtlänge von 57 mm bietet der Bohrer ein günstiges Verhältnis aus Auskragung und Axialstabilität; die kurze Bauform reduziert Vibrationen und Verkantungsgefahr. Die Ausführung ist ideal für Handbohrmaschine-Einsätze, kann aber genauso in stationären Maschinen verwendet werden. Lieferbar in der praktischen Verpackungseinheit von 10 Stück, eignet sich der Bohrer sowohl für Einzelanwender wie für Kleinserien. Spitzenwinkel, Handhabung und Einsatzhinweise Der vorgegebene Spitzenwinkel von 118° begünstigt das Zentrieren auf weniger harten Oberflächen und erleichtert das Anbohren ohne zusätzliches Zentrieren bei vielen Metallen. Bei besonders harten Werkstoffen kann ein größerer Winkel erwogen werden. Zur Verlängerung der Standzeit wird empfohlen, mit geeigneter Schmier- oder Kühlschmierstoffzufuhr zu arbeiten und bei Bedarf vorzuentlasten; so bleiben Schnittqualität und Bohrgenauigkeit erhalten. Empfehlung: Den MetavCUT HSS-Spiralbohrer für präzise Metallarbeiten verwenden und bei technischen Fragen direkt Metav kontaktieren unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 40024-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Typ: Typ N Material: HSS Norm: DIN 338 Ausführung: kurz Fakten Durchmesser: 2,4 mm Gesamtlänge: 57 mm Spirallänge: 30 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Farbe: schwarz Für Bohrmaschine: Handbohrmaschine HSS: Schnellarbeitsstahl, zäh und verschleißfest Typ N: Normalspirale, optimal für Metallbearbeitung FAQ Für welche Werkstoffe eignet sich dieser Spiralbohrer am besten? Der Spiralbohrer von MetavCUT (SKU 40024-FDA) eignet sich besonders für legierte und unlegierte Stähle, Gusseisen sowie Nichteisenmetalle und Kunststoffe und deckt damit ein breites Spektrum an Metallbearbeitungen ab. Ist der Bohrer für handgeführte Akkubohrschrauber geeignet? Ja, die kurze Ausführung und die Bauweise nach DIN 338 machen den MetavCUT HSS-Bohrer kompatibel mit Handbohrmaschinen; dennoch ist auf ein sicheres Spannen und angemessene Drehzahl zu achten. Welche Vorteile bringt die rollgewalzte Fertigung? Die rollgewalzte Herstellung des HSS-Materials reduziert Oberflächendefekte und erhöht die Elastizität, was die Bruchsicherheit verbessert und die Lebensdauer des Spiralbohrers steigert. Wie viele Bohrer sind in der Verpackungseinheit enthalten? Geliefert wird die Ausführung in der Verpackungseinheit von 10 Stück, geeignet für Werkstattbedarf und kleinere Serien, bereitgestellt durch Metav als verlässlicher Anbieter.
2.4mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill – Type N extra short HSS‑G (Ø 2.4 mm, 118°, Bright Finished, DIN 1897) by MetavCUT A MetavCUT Twist Drill (Type N) for precise metal drilling with an extra‑short design ideal for hand Drilling Machines. Extra-short HSS-G for enhanced stability Ø 2.4 mm precision for fine metalwork 118° point angle for easy centring Cylindrical shank fits standard chucks Exceptional stability and faster metal machining The extra‑short ground HSS‑G construction delivers noticeably higher rigidity compared with standard lengths. This reduces vibration and breakage risk when working in tight setups and thin materials. Thanks to the ground geometry, machining can be performed up to 40% faster while requiring significantly less axial pressure, which lowers operator fatigue and improves repeatability on metal components. Ideal for confined spaces and hand drilling Designed with a total length of 38 mm and a spiral length of 12 mm, the compact format suits applications where access is limited or where a short overhang is required. The cylindrical shank fits conventional three‑jaw chucks used on hand Drilling Machines, offering universal compatibility and quick tool changes. Conformance to DIN 1897 guarantees dimensional reliability for workshop and maintenance use. Built for metal — versatile in material range As a Type N normal‑spiral bit, this tool is optimised for metalworking tasks. It performs well in alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics. The 118° point angle improves centring on slightly curved surfaces and helps when machining softer metals such as Aluminium, while the Type N spiral remains the preferred choice for metal drilling operations. Practical advantages for professionals and enthusiasts The short, robust geometry provides higher torsional resistance and a lower tendency to chatter, making it suitable for production, maintenance and committed hobbyists. The ground cutting edges allow economical regrinding and maintenance, extending service life. Note that the cylindrical shank is universally compatible, though under very high torque conditions a different shank form can offer improved anti‑slip behaviour. We recommend the MetavCUT extra‑short HSS‑G Twist Drill for precise metalworking and confined‑space applications — for further technical advice or to ensure the tool meets your specific requirements, METAV Werkzeuge provides competent consultation by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 56024-FDA Diameter: 2.4 mm Total length: 38 mm Spiral length: 12 mm Point angle: 118° Type: Type N Execution: extra short Colour: Bright Finished Shank design: Cylindrical Material: HSS‑G Standard: DIN 1897 Application: Drills for metal Model series: Standard Line For Drilling Machine: Hand Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill primarily used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger metal diameters. Its extra‑short, ground design is easy to regrind and endures higher loads, making it suitable for robust metalworking tasks. Which three main drill types exist? There are three common drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for drilling various metals.
2.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 2.5 mm, 118° tip, HSS, short, Black, DIN 338 (MetavCUT) The Twist Drill Type N for drilling metal offers precise pilot-hole performance in drilling machines and hand drills, with a short design and HSS material for stability and durability. Short design increases drilling stability High-Speed Steel (HSS) suited for metal work 2.5 mm diameter for accurate pilot holes 118° tip improves centring on curved surfaces Precision and stability for demanding metal work A short, roll-formed Twist Drill delivers reduced overhang and significantly less bending during operation, which results in greater accuracy when producing pilot holes. The compact geometry means the tip remains concentric with the spindle even under load, lowering the risk of runout and improving hole quality. This construction is particularly valuable when working on components requiring tight tolerances, where consistent alignment and repeatable results are essential. Durable HSS material and industrial standard conformity Made from HSS (High Speed Steel) and manufactured to DIN 338, this short twist drill combines wear resistance with toughness for standard metalworking tasks. HSS provides a balance between hardness and elasticity, reducing breakage risk in diameters below 6 mm and enabling effective machining of alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics. Compliance with DIN 338 guarantees consistent dimensions and performance suited to both stationary and portable drilling equipment. Optimised geometry for reliable centring and chip evacuation The 118° point angle and Type N spiral form (normal twist) support controlled entry and moderate cutting forces, helping to centre the drill on slightly curved or uneven surfaces. The short spiral length and classic flute geometry aid chip evacuation in metal drilling, reducing heat buildup and improving tool life. For tasks where precise pilot holes are required before reaming or tapping, this geometry offers an effective compromise between fast penetration and stable guidance. Who benefits and typical applications Engineers, maintenance technicians and metalworkers who require reliable pilot drilling will value the combination of Type N geometry and short overall length. The bit is intended primarily for metal applications and is compatible with standard chuck-mounted drilling machines and many hand drills, making it suitable for workshop and on-site operations. MetavCUT designed this component for repeatable, everyday use where ease of regrinding and consistent performance matter. Choose MetavCUT’s Twist Drill for precision metal drilling and consult METAV Werkzeuge’s experts for tailored advice — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40025-FDA Diameter: 2.5 mm Spiral length: 30 mm Overall length: 57 mm Point angle: 118° Type: Type N Execution: short Material: HSS Norm: DIN 338 Colour: black Application: Drills for metal For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill, a Type N metal drill, is primarily used for machining metals and is effective on alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics; its short design and HSS material improve stability and reduce breakage risk in small diameters. Which three drill types are commonly distinguished? Commonly, drills are classified as metal drills, wood drills and masonry/concrete drills — the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks.
2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill – Extra‑Long HSS‑G 2.5 mm, 135° (Bright Finished, Fully Ground, DIN 1869) by MetavCUT A Twist Drill in Extra‑Long execution designed for deep metal drilling with Drilling Machines and demanding workshop applications. Extra‑long design for deep boreholes 2.5 mm Diameter for precise pilot holes 135° Tip Angle for harder materials Fully Ground Shank for high concentricity Conforms to DIN 1869 for industrial use Faster metal machining with hardened HSS‑G for professionals The HSS‑G material and CNC grinding deliver a markedly sharper cutting geometry that enables up to 40% faster drilling with 50% less feed force compared to conventional HSS bits. This means less operator fatigue and higher throughput in serial production. The combination of HSS‑G and a ground flute geometry also produces cleaner holes in alloyed and unalloyed steels, reducing rework and saving machining time. Reach deeper, work cleaner — ideal for tight or hard‑to‑access spots Designed as an Extra‑Long bit (Total Length 140 mm, Spiral Length 95 mm), this drill lets users tackle deep or hard‑to‑reach bores without extensions. The extended working length reduces the need for additional tooling and ensures a straighter approach in recessed positions. For projects where accessibility is the limit, the longer flute and bright finished surface ease chip evacuation and visual alignment. Precision and stability for demanding materials The Fully Ground shank and precision flute grind result in excellent runout and centring, producing accurately sized holes and better surface quality. With a 135° tip angle, the geometry is optimised for harder workpiece materials such as stainless and tempered steels, shortening plunge time and improving control during initial entry. This characteristic makes the bit particularly suited to workshop environments using Drilling Machines where repeatability matters. Usage advice to maximise lifetime and hole quality For durable performance, use the drill with appropriate coolant and avoid excessive side loads; the ground design is precise but can be more brittle than rolled alternatives. Regrinding is straightforward due to the clear flank geometry, but for best results regrind at a specialist to preserve cutting angles. The product is primarily intended for metalworking tasks including casting, sintered metals, and hard plastics, delivering reliable results when used in stationary drilling setups. I recommend the MetavCUT Extra‑Long Twist Drill for precise, deep metal drilling — for personalised advice or supplementary technical data contact METAV Werkzeuge: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 32025-FDA Diameter: 2.5 mm Total Length: 140 mm Spiral Length: 95 mm Tip Angle: 135° Execution: Extra long Shank Finish: Fully Ground Colour / Surface: Bright Finished Material: HSS‑G Standard: DIN 1869 Suitable For: Drilling Machine (Handheld use only with caution) Model Series: Standard Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill in HSS‑G is designed for demanding metalworking: it works well in alloyed and unalloyed Steel, Cast Steel, Grey Cast Iron, Sintered Iron, Tempered Castings, Non‑Ferrous Metals and Hard Plastics, providing clean, precise holes when used with appropriate machining parameters. Can the MetavCUT Twist Drill be used in a handheld drill? The MetavCUT Twist Drill is primarily intended for use in a Drilling Machine for best concentricity and cooling; handheld use is possible for light tasks but shorter drills or stationary setups are recommended to avoid breakage due to the ground geometry. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength materials and large drill diameters; its shape allows easy sharpening and it sustains greater loads, making it suitable for demanding metalwork and deep holes. Which three drill types exist? The three main drill types are Metal Drill (Metalbrörer), Wood Drill, and Stone/Concrete Drill. Why are Twist Drills pointed (split point)? Pointing reduces the chisel edge at the tip of the Twist Drill, significantly lowering friction and the required feed force while improving centre‑tracking in the workpiece. Can a metal Twist Drill be used to drill wood? A metal Twist Drill can be used in wood but guidance is poorer and results are less clean; however, such drills are easier to resharpen and have a lower self‑feeding tendency.
2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der extra lange HSS‑G Spiralbohrer kombiniert Geschliffene Qualität mit einer Tieflochspirale nach DIN 1869 und ermöglicht schnelleres Bohren bei deutlich geringerer Anpresskraft; ideal für tiefe Bohrungen in Stahl und Guss. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (Standard Line) Spiralbohrer extra lang für präzise Tiefbohrungen in Stahl und Guss Spiralbohrer extra lang für tiefe Bohrungen HSS‑G geschliffen für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für härtere Werkstoffe Gesamtlänge 180 mm, Spirallänge 120 mm Geeignet für Handbohrmaschinen und Werkstatt Präzision und Effizienz bei Metallbohrungen Der HSS‑G Werkstoff und die geschliffene Schaftgeometrie sorgen für eine sehr scharfe Schneide und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher und geringeren Nachbearbeitungsaufwand bedeutet. Durch den CNC‑Schliff wird das Werkstück schneller durchdrungen: Die Konstruktion ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS‑Bohrern. Diese Kombination steigert die Produktivität in Werkstatt und Produktion. Tiefbohren sicher und kontrolliert umsetzen Dank der Tieflochspirale nach DIN 1869 und der extra langen Ausführung eignet sich der Bohrer besonders für tiefe Sacklochbohrungen oder schwer zugängliche Stellen. Bei Einsatz in Handgeführten Maschinen empfiehlt sich ein Anpunkten mit einem Zentrierbohrer zur erhöhten Positioniergenauigkeit. Kühlung und moderate Drehzahlen verlängern die Lebensdauer und verhindern übermäßige Spannungsbildung im Bohrgut. Materialeigenschaften und Fertigungsdetails Der geschliffene Spiralkeil führt zu sehr scharfen Kanten und exakter Bohroberfläche, weshalb diese Ausführung bei anspruchsvollen Metallarbeiten bevorzugt wird. Der Spitzenwinkel 135° reduziert das Ausbrechen beim Anbohren harter Werkstoffe wie legiertem Stahl oder Edelstahl. Beachten Sie, dass geschliffene Bohrer empfindlicher gegenüber Biegebeanspruchung sind; stationäre Aufnahme und Kühlung erhöhen die Standzeit deutlich. Zielgruppe, Einsatzbereiche und Praxisempfehlungen Dieser Spiralbohrer wurde für Werkstätten, Montagebetriebe und ambitionierte Handwerker entwickelt, die präzise Tiefbohrungen in legierten und unlegierten Stählen, Gusswerkstoffen und Hartkunststoffen benötigen. Für optimale Ergebnisse empfiehlt sich die Nutzung von Kühlschmierstoff, angepasste Drehzahl und bei Bedarf ein mehrstufiges Bohren bei größeren Querschnitten. Bei Fragen zur passenden Anwendung berät Metav kompetent und praxisnah. Empfehlung: MetavCUT Standard Line Spiralbohrer für präzise Tiefbohrungen direkt über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erwerben Produktmerkmale Artikelnummer: 33025-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 1869 Material: HSS-G Ausführung: extra lang Daten Durchmesser: 2,5 mm Gesamtlänge: 180 mm Spirallänge: 120 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Eignung: legierter und unlegierter Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle, Hartkunststoff HSS‑G: Hochgeschwindigkeitsstahl, geschliffen FAQ Für welche Materialien ist der MetavCUT Spiralbohrer geeignet? Der MetavCUT Spiralbohrer (Standard Line, SKU 33025-FDA) eignet sich für legierte und unlegierte Stähle, Gusswerkstoffe sowie Nichteisenmetalle und Hartkunststoffe; bei härteren Materialien empfiehlt sich der Einsatz des 135° Spitzenwinkels. Ist der Spiralbohrer für die Handbohrmaschine geeignet? Ja, der Spiralbohrer von MetavCUT ist für Handbohrmaschinen und Werkstattausrüstungen ausgelegt; bei tiefen Bohrungen sollten Kühlung und kontrollierte Drehzahlen verwendet werden, um die Standzeit zu erhöhen. Welche Vorteile bietet die geschliffene Ausführung? Die geschliffene Ausführung des HSS‑G Spiralbohrers (MetavCUT Standard Line, 33025-FDA) liefert schärfere Kanten und höhere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern und weniger Nacharbeit führt. Wie tief kann mit dem extra langen Spiralbohrer gebohrt werden? Die extra lange Ausführung mit einer Spirallänge von 120 mm und Gesamtlänge 180 mm ist für tiefe Bohrungen konzipiert; bei extremen Tiefen wird dennoch Kühlung und abgestuftes Aufbohren empfohlen. Welche Wartungstipps gibt es für lange Standzeiten? Für lange Standzeiten empfiehlt Metav: Kühlung einsetzen, passende Drehzahlen wählen, bei Bedarf anplicken und stationäre Spannmittel nutzen; diese Hinweise gelten besonders für den MetavCUT Spiralbohrer SKU 33025-FDA.
2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill Spiralbohrer – Twist Drill, 2.5 mm Ø, 135° tip, extra long, bright finished, fully ground, HSS‑G (DIN 1869) A Twist Drill Spiralbohrer designed for deep, precise metal drilling in Drilling Machines and hand-held drills. Extra-long design for deep holes HSS‑G fully ground for faster, precise drilling 135° tip angle for harder materials Conforms to DIN 1869 for demanding applications High-performance material for demanding Metalwork HSS‑G construction delivers a combination of hardness and cutting-edge geometry that benefits metalworking tasks. The fully ground flute geometry provides sharp cutting edges and high runout accuracy, which results in cleaner holes and less rework. According to internal data, the ground HSS design can enable up to 40% faster drilling while requiring approximately 50% less feed force compared with conventional rolled HSS bits, improving efficiency in production and workshop environments. Built for deep holes and tough materials The extra long overall length of 225 mm with a spiral length of 150 mm makes this Twist Drill especially suitable when access is limited or when long through-holes are needed. The 135° tip angle is optimised for harder materials — it reduces initial biting and shortens approach time into the workpiece, which is advantageous when drilling stainless steel and other high-strength alloys up to 1000 N/mm². Precision geometry and recommended usage The fully ground (CNC‑ground) flute and shank ensure high concentricity and precise hole quality, which is particularly important for metal and hard-plastic applications. Ground Twist Drills are sharper and generally produce superior surface finish; however, they can be relatively more brittle than rolled types. For best results, use the MetavCUT Twist Drill in stationary Drilling Machines with appropriate cooling and controlled feed to extend tool life. Typical applications and target users This Twist Drill is intended for professional machinists, maintenance technicians and metalworking shops that require reliable deep-hole performance. It is suitable for legierte und unlegierte Stahl (alloyed and unalloyed steel), Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle and hard plastics. The Extra Long design supports drilling operations where standard-length bits are insufficient, while the DIN 1869 specification assures compatibility with industrial production standards. Highly recommended: Choose the MetavCUT Twist Drill for deep, precise metal drilling — contact METAV Werkzeuge for expert technical advice via email info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 34025-FDA Diameter: 2.5 mm Tip angle: 135° Overall length: 225 mm Spiral length: 150 mm Execution: extra long Colour/Finish: bright finished Shank execution: fully ground Material: HSS‑G Standard: DIN 1869 For machine: Drilling Machine / Hand Drills Application: Drills for metal Model series: Standard Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill suitable for stainless steel and high-strength alloys? The MetavCUT Twist Drill is designed to machine materials such as stainless steel and other high-strength alloys up to around 1000 N/mm²; its 135° tip and HSS‑G ground geometry help reduce drilling forces and improve centring in tougher materials. Can the MetavCUT Twist Drill be used in a hand-held drill? The MetavCUT Twist Drill can be used in hand-held drills for lighter tasks, but optimal performance and tool life are achieved in a stationary Drilling Machine with adequate clamping and coolant due to the Extra Long design and ground geometry. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters; its ground geometry is easy to re‑sharpen and resists heavier loads, making it suitable for demanding metal drilling. Which three drill types exist? The three main drill categories are metal drills, wood drills, and stone/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the drill point; by re‑pointing the tip, frictional forces are substantially lowered so that less feed force is needed and the drill centres more accurately in the workpiece. Can you drill wood with a Twist Drill? A metal Twist Drill can be used in wood, but guidance and finish are generally inferior compared with dedicated wood drills; metal bits are easier to re‑sharpen and have less self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is typically made with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE is automatically superior to HSS is not universally correct; assess the working conditions to determine whether the higher cost of HSSE is justified for your application.
2.5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N extra short, Ø 2.5 mm, 118° tip, Bright Finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill is an extra short Type N drill designed for metalworking with a 2.5 mm Diameter and a 118° Tip Angle, suitable for Hand Drilling Machines and compact operations. Extra short design for high stability and tight spaces Ground HSS‑G for up to 40% faster drilling Cylindrical Shank for universal chuck compatibility Conforms to DIN 1897 for consistent quality Optimised for metal drilling and thin sheet applications Precise metalworking with higher feed efficiency The extra short design of this Twist Drill delivers noticeably improved Stability and reduced breakage risk when compared with standard-length tools. The Ground HSS‑G cutting geometry reduces required Feed Force and increases Penetration Speed, so holes in alloyed and unalloyed Steel, Cast Iron and Non‑Ferrous Metals are produced more reliably. For users who require controlled drilling in limited access areas, the shortened Overall Length improves handling and reduces vibration while maintaining concentricity. Material advantages and drilling behaviour Manufactured from HSS‑G, the tool offers robust wear resistance and edge retention for demanding metal operations. The 118° Tip Angle favours softer metals and provides easier centring on curved surfaces, while the classic Type N flute geometry is optimised for chip evacuation in metalworking. The Cylindrical Shank ensures universal compatibility with standard three‑jaw chucks, although users should note increased slippage risk under very high torque compared with hex or triangular shanks. Ideal applications and target users This drill is aimed at professionals and hobbyists working with sheet metal, profile sections and machine components where compact tooling and precise results matter. It excels in Hand Drilling Machine use and is suitable for drilling into Steel, Cast Steel, Sintered Iron and various Hard Plastics. For projects requiring repeatable and centred holes in thin materials or confined setups, the shortened geometry provides a clear advantage and reduces the chance of deflection. Handling tips and what makes this drill stand out To achieve best results, use moderate cutting speeds and steady feed; lubrication is recommended for alloyed steels to extend tool life. The Extra Short format reduces bending moments and is therefore less prone to runout, while the DIN 1897 conformity guarantees dimensional and geometric consistency. The product’s Bright Finished surface supports easy identification and corrosion resistance during storage. For precision metal drilling, choose the MetavCUT Twist Drill Type N with 2.5 mm Diameter and extra short design — METAV Werkzeuge provides expert technical advice and support: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Twist Drill / Spiralbohrer) Brand: MetavCUT SKU: 56025-FDA Diameter: 2.5 mm Tip Angle: 118° Type: Type N Material: HSS‑G Execution: Extra short Colour / Finish: Bright Finished Shank Design: Cylindrical Spiral Length: 14 mm Overall Length: 43 mm Series: Standard Line Application: Drills for Metal For use with: Drilling Machine (Hand Drilling Machine) Standard: DIN 1897 Additional note: Extra short length increases stability and is suitable for thin materials and tight spaces Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high‑strength workpieces and larger hole diameters; its robust geometry and grind make it suitable for alloyed and unalloyed steels, cast materials and hard plastics while resisting higher loads. Which three drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill Type N belongs to the Metal Drill category and is tailored to metalworking tasks. Why are Twist Drills sharpened at the point? The point sharpening reduces the cross‑edge at the tip of the Twist Drill, which lowers friction and required feed forces while improving centring accuracy in the Workpiece. Can a metal Twist Drill be used for wood? A Metal Drill can be used in Wood, but guidance and finish are usually inferior compared with dedicated Wood Drills; however, Metal Drills are easier to re‑sharpen and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most used? A full‑bore operation is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.
2.5mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — fully ground HSS‑G, 2.5 mm, 118°, hexagonal shank, silver, DIN 338, MetavCUT The Twist Drill is a fully ground HSS‑G drill bit designed for precision metalworking on drilling machines, offering a 2.5 mm diameter and a 118° point angle for reliable centring and clean holes. Fully ground HSS‑G for precise metal holes Hexagonal shank for form‑fit torque transfer DIN 338 compliant short twist drill 118° point angle improves centring on curves 80 mm overall length for versatile reach Precision and material: why fully ground HSS‑G matters A fully ground HSS‑G construction ensures very sharp cutting edges and high runout accuracy, which produces cleaner, more precise holes in metals. For users working with alloyed or unalloyed steel, cast steel, and non‑ferrous metals, the combination of ground geometry and HSS‑G material delivers faster drilling and reduced required feed force compared with roll‑formed variants. For the occasional user, this means fewer torn edges and less rework; for professionals, it supports higher reproducibility on production parts. Shaft design and practical handling benefits The hexagonal shank (hexagon shaft) enables secure engagement in quick‑change holders and many cordless drivers without slipping, improving torque transfer and reducing downtime for bit changes. Because the shank is form‑fitting, operators experience more consistent cutting behavior when using hand drills or drilling machines. This design choice is particularly useful when working on jobs that require rapid tool swaps and firm rotational control. Geometry and recommended applications for cleaner holes With a 118° point angle, this twist drill penetrates softer metals and aluminium more easily and centres well on slightly curved surfaces. The geometry also supports typical metalworking tasks where entry burr and hole roundness are important. For drilling in harder materials or when drilling deep, consider matching coolant use and reduced speeds to prolong tool life and avoid brittle breakage typical of very sharp ground drills. Versatility and intended users This bit suits metalworkers, maintenance technicians, and workshop professionals who require reliable, repeatable results in light‑to‑medium metal drilling. The 2.5 mm diameter and 80 mm overall length provide a balance between reach and rigidity, making the bit practical for general fabrication and repair work. Users seeking simple, serviceable tooling will appreciate that the bit can be re‑sharpened and is compatible with standard holders and many drill chucks. How the DIN standard and grinding process support quality Conforming to DIN 338 signals that the geometry and dimensions meet established standards for short twist drills with cylindrical shanks. The term "fully ground" means the flute geometry is produced by CNC grinding rather than roll forming, which typically results in superior concentricity and sharper edges. For customers unfamiliar with these terms: grinding produces a more accurate cutting profile, while DIN 338 guarantees standardized dimensions and interchangeability. Choose MetavCUT’s Twist Drill in fully ground HSS‑G for demanding metalwork — for detailed technical advice or help selecting the right diameter and geometry, contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Data Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 57025-FDA Diameter: 2.5 mm Point angle: 118° Execution / Finish: fully ground (geschliffen) Colour: silver Intended for: Drilling Machine (Handbohrmaschine) Spiral length: 30 mm Overall length: 80 mm Shank design: hexagonal (sechskant) Series: Standard Line Application: Drills for metal (Bohrer für Metall) Material: HSS‑G Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which brand supplies this bit? The MetavCUT Twist Drill (Twist Drill for Drilling Machine) is primarily used for machining high‑strength materials and larger drill diameters; its ground flute geometry makes it easier to sharpen and able to withstand greater loads, delivering precise, clean holes in metalworking tasks. Which three drill types exist and how does the MetavCUT Twist Drill fit among them? The main drill categories are metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for steels and other metals rather than masonry or specialised wood bits. Why are Twist Drills pointed (why is the tip ground)? The tip of the Twist Drill by MetavCUT is sharpened to reduce the chisel edge at the centre; this lowers friction and required feed forces while improving self‑centring in the workpiece for a cleaner start and better hole accuracy. Can a metal Twist Drill be used in wood? A MetavCUT metal Twist Drill can be used in wood, but it offers less guidance and a rougher finish than dedicated wood bits; however, it is easier to resharpen and tends to have a lower tendency to self‑feed compared with some wood‑specific designs. For which drilling depths is the Twist Drill most commonly used? A through hole produced with a Twist Drill is common up to a diameter of about 20 mm and drilling depths up to 100 mm; in such ranges the Twist Drill is the most frequently used tool for metal removal. Is HSS or HSSE better for my application? Choosing between HSS and HSSE depends on working conditions; the general belief that HSSE is always superior to HSS is incorrect. Assess whether your operating conditions justify the higher cost of HSSE before deciding; the MetavCUT Twist Drill in HSS‑G offers a strong balance of performance and economy for many metalworking tasks.
2.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short Type N, 2.5 mm, 118°, TiN-coated HSS-G (DIN 338) by MetavCUT The Twist Drill is a short Type N metalworking drill designed for precision drilling in alloys and steels with a 2.5 mm diameter and a 118° point angle. Short design for greater stability and precision TiN-coated surface for extended tool life Fully ground HSS-G for faster cutting and clean holes Conforms to DIN 338 for consistent quality Optimised for Drilling Machine applications Precision and stability for demanding metalwork The short geometry of this Twist Drill reduces the unsupported overhang, resulting in higher stability and less tendency to deflect under load. This design advantage makes it particularly suitable for precision work and for drilling in hard materials such as alloyed steel and tempered castings. The 118° point angle supports accurate centring on slightly convex surfaces and improves initial penetration, which is beneficial when accurate positioning is critical. Longer lifetime through coating and material A TiN-coated surface combined with HSS-G substrate reduces friction and wear during cutting, increasing service life under metalworking conditions. Titanium nitride lowers adhesion of chips and heat buildup, while the fully ground HSS geometry delivers sharper cutting edges and improved chip evacuation. Together these properties help maintain performance over many holes when used with appropriate cooling. Faster drilling with lower feed force The ground flute geometry of this short Twist Drill enables up to 40% faster drilling and requires significantly less axial force compared with conventional HSS types. This leads to smoother operation on both stationary and portable drilling machines and reduces operator fatigue. For best results, pairing the drill with suitable coolant or cutting fluid minimises thermal stress and preserves cutting geometry. Application scope and recommended usage Designed to meet DIN 338, this short Type N Twist Drill is intended primarily for metalworking tasks such as drilling in alloy and unalloyed steels, cast iron, sintered iron, non-ferrous metals and hard plastics. Use in a drilling machine with correct speeds and lubrication is advised. Because the drill is ground rather than rolled, expect very precise hole quality and good concentricity, while taking care to avoid excessive impact loading to prevent brittle fracture. Strongly recommended: choose the MetavCUT Twist Drill for professional metalworking tasks and contact METAV Werkzeuge for tailored technical support — 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 46025-FDA Diameter: 2.5 mm Overall length: 57 mm Spiral length: 30 mm Point angle: 118° Type: Type N Execution: Short Shaft design: Fully ground Material: HSS-G Coating/Colour: TiN-coated Application: Drills for metal / Drilling Machine Model series: Standard Line Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is used mainly for drilling metal; it is especially suited to alloyed and unalloyed steel, cast iron, sintered iron, non-ferrous metals and hard plastics. Its short construction and HSS-G substrate make it appropriate for precise metalworking where stability and hole quality are priorities. Which three drill types exist and how does the Twist Drill compare? The three common drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking, offering sharper ground geometry and TiN coating compared with general-purpose wood or masonry drills.
2.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Der Spiralbohrer von MetavCUT kombiniert HSS-G-Material, geschliffene Schaftgeometrie und die lange Ausführung nach DIN 340 zu einem zuverlässigen Werkzeug für tiefe Metallbohrungen; er ermöglicht schnelleres Arbeiten bei geringer Anpresskraft und bietet gleichzeitig hohe Rundlaufgenauigkeit. Bestellen Sie über Metav Werkzeuge oder nutzen Sie unsere Beratung, wenn Sie technische Details klären möchten. Spiralbohrer 2,5 mm – MetavCUT Standard Line Der Spiralbohrer in langer Ausführung nach DIN 340 ist für präzise Metallbohrungen konzipiert und eignet sich besonders für tiefere Bohrungen und schwer zugängliche Bohrstellen. Spiralbohrer 2,5 mm für präzise Metallbohrungen HSS-G geschliffen für saubere Bohrlöcher Lange Ausführung nach DIN 340 für tiefe Bohrungen Gesamtlänge 95 mm mit Spirallänge 62 mm Spitzenwinkel 118° ideal für allgemeine Werkstoffe Materialqualität für saubere und präzise Bohrungen Die Verwendung von HSS-G (geschliffen) sorgt für sehr scharfe Schneidkanten und eine hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern in Stahl und Guss führt. Durch den CNC-Schliff reduziert sich die Reibung beim Eindringen, sodass sich die Bohrgeschwindigkeit erhöht und die benötigte Anpresskraft sinkt. Dieser Vorteil macht das Werkzeug besonders geeignet für Werkstätten, die Wert auf gleichbleibende Bohrbildqualität legen. Tiefe Bohrungen sicher und kontrolliert ausführen Die lange Ausführung gemäß DIN 340 mit einer Spirallänge von 62 mm und einer Gesamtlänge von 95 mm ermöglicht das Erreichen von tieferen Bohrpunkten und innenliegenden Bohrstellen ohne aufwändiges Umspannen. Anwender profitieren von besserer Zugänglichkeit bei Durchbrüchen und Bohrbuchsen. Für stabile Ergebnisse empfiehlt sich die Nutzung mit angemessener Kühlung und gegebenenfalls stationärer Maschine, um Bruchrisiken zu minimieren. Vielseitige Einsatzgebiete und kompatible Werkstoffe Im Standard-Bereich bietet dieser Bohrer Flexibilität für Werkstattarbeiten, Montage und DIY-Projekte; geeignet sind legierte und unlegierte Stähle, Gusseisen, Temperguss, Sintereisen, Nichteisenmetalle sowie Hartkunststoffe. Der Bohrer lässt sich mit Handbohrmaschine oder stationärer Säule einsetzen, wobei bei hoher Präzision ein Vorzentrieren die besten Ergebnisse liefert. So profitieren sowohl Profi-Handwerker als auch ambitionierte Heimwerker von der Vielseitigkeit. Handhabung, Schutz und Pflegetipps für längere Lebensdauer Da der Bohrer geschliffen ist, sind die Schneiden sehr fein und damit anfälliger für Bruch bei unsachgemäßer Benutzung; moderate Drehzahlen, kontinuierliche Kühlung und kontrollierter Vorschub verlängern die Standzeit merklich. Ein Zentrierbohrer hilft bei präzisen Passungen, und die Lagerung in einer schützenden Verpackung verhindert Kantendefekte. Diese einfache Pflege sorgt für dauerhafte Performance und konstante Bohrergebnisse. Empfehlen Sie den Einsatz des Spiralbohrers von MetavCUT für präzise Tiefbohrungen und sichern Sie die Verfügbarkeit über Metav Werkzeuge; bei technischen Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 53025-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Ausführung: lang Fakten Durchmesser: 2,5 mm Gesamtlänge: 95 mm Spirallänge: 62 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Schaftausführung: geschliffen Norm: DIN 340 (lange Ausführung) Farbe: blank Für Bohrmaschine: Handbohrmaschine Hersteller: MetavCUT Ausführung: lang FAQ Ist der Spiralbohrer für gehärteten Stahl geeignet? Der Spiralbohrer von MetavCUT aus HSS-G ist für legierte und unlegierte Stähle bis zu typischen Einsatzgrenzen geeignet, bei sehr hartem oder gehärtetem Stahl empfiehlt sich jedoch der Einsatz von Vollhartmetallwerkzeugen. Eignet sich der Bohrer für Handgebrauch mit Akkubohrschrauber? Ja, der Bohrer ist für die Nutzung mit Handbohrmaschine und Akkubohrschraubern im Standard-Bereich ausgelegt; bei tiefen Löchern oder hoher Präzision ist jedoch eine stationäre Maschine empfehlenswert. Wie sollte der Bohrer gekühlt werden, um Standzeit zu erhöhen? Kontinuierliche Nasskühlung oder zyklische Schmierung reduziert Wärme und sorgt für längere Standzeiten beim Spiralbohrer von MetavCUT; für die SKU 53025-FDA wird eine moderate Kühlung empfohlen. Brauche ich einen Zentrierbohrer vor dem Einsatz? Für hochpräzise Passungen oder wenn Wandern vermieden werden soll, empfiehlt sich ein Vorbohren mit einem Zentrierbohrer; das verbessert das Ergebnis bei Bohrungen mit dem Spiralbohrer MetavCUT Standard Line. Wie lager ich den Bohrer richtig, um Beschädigungen zu vermeiden? Die Lagerung in der Originalverpackung oder in einer geordneten Bohrerbox schützt die geschliffenen Schneiden; für die SKU 53025-FDA ist eine trockene, saubere Umgebung ideal.
2.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 2.6 mm, 118° tip, black, DIN 338 The Twist Drill Type N is a short HSS metal drill designed for precise work in Drilling Machines and hand-held drills, ideal for accurate holes in steels and non-ferrous metals. Short HSS construction for high stability 2.6 mm diameter for fine, precise holes 118° tip for reliable centring on curved surfaces Conforms to DIN 338 for consistent quality Suitable for Drilling Machine use and metalworking Precise metal drilling with reduced breakage risk Short HSS Twist Drills deliver increased stiffness compared with longer variants, which reduces bending and improves hole accuracy. The 2.6 mm diameter combined with a total length of 57 mm and a spiral length of 30 mm gives a compact overhang that minimises vibration and deflection. For tasks requiring exact hole position—such as assembly, jigs or precision fixtures—this drill provides the mechanical advantage of a short design and the wear resistance of high-speed steel. Better centring and cutting behaviour for everyday workshop use The 118° tip angle of this Twist Drill helps with quick centring on flat and slightly curved surfaces and lowers the tendency to wander during start-up. This characteristic makes the tool particularly suitable when drilling softer steels, aluminium and common non-ferrous alloys. Users benefit from easier handling and more predictable entry behaviour, which reduces rework and speeds up repetitive operations. Designed for metalworkers and precision users Engineered as a classic metalworking solution, the Type N Twist Drill is aimed at professionals and skilled hobbyists who require reliable results with minimal tool deflection. The Type N normal spiral geometry is optimised for machining metal and provides an effective chip evacuation path when paired with appropriate cutting speeds and coolant. This drill is recommended for operations where repeatability and tool life are important. Standard conformity and manufacturing advantages Conforming to DIN 338, the short Twist Drill follows established dimensional and manufacturing standards, ensuring interchangeability and predictable performance. The roll-walzen (rolled) HSS production process improves elasticity and decreases breakage risk for small diameters, making this drill a dependable choice for drilling tasks up to the typical limits for high-speed steel in workshop environments. Strong recommendation: For precision metal drilling, choose the MetavCUT Twist Drill Type N and consult METAV Werkzeuge for customised advice — they provide comprehensive technical support and ordering assistance via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 40026-FDA Diameter: 2.6 mm Spiral length: 30 mm Total length: 57 mm Tip angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: Short Colour: Black For: Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill mainly used? The MetavCUT Twist Drill Type N is mainly used for machining high-strength materials and larger hole diameters in metalworking. Its form allows straightforward sharpening and it withstands higher loads, making it suitable for drilling alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and masonry/concrete drills, and the MetavCUT Twist Drill Type N belongs to the metal drill category designed for metalworking tasks.
2.6mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N extra-short HSS‑G drill, Ø 2.6 mm, 118° point, bright finished, cylindrical shank, DIN 1897 The Twist Drill Type N is an extra-short HSS‑G drill bit designed for precise metalworking with hand Drilling Machines and tight-space applications. Extra-short design for higher stability HSS‑G material for faster cutting 118° point angle for improved centring Cylindrical shank fits standard three-jaw chucks Conforms to DIN 1897 for consistent dimensions Precision and stability for metalworking that matters This extra-short Twist Drill from MetavCUT is engineered to reduce flex and breakage when working with alloyed and unalloyed steels. The shortened overall length and reduced flute/working length increase stability and torsional resistance, which directly lowers the risk of snap-off during manual drilling. For users who require predictable, repeatable holes in components, the compact geometry delivers a noticeable increase in control and operator confidence. Easier centring and reliable start on curved or soft surfaces With a 118° point angle, the Twist Drill provides gentler penetration and improved centring on softer materials such as aluminium or wood-like substrates when used incidentally. This geometry reduces the tendency to wander on crowned or irregular surfaces, so holes start cleanly with less hand correction. The result is a neater entry hole and less rework, which is particularly valuable for time-sensitive fabrication or assembly tasks. Faster cutting with lower feed force thanks to HSS‑G The HSS‑G construction of this MetavCUT Twist Drill combines high-speed steel properties with ground geometry to enable up to 40% faster drilling and approximately 50% lower feed force compared with conventional HSS bits. This means less operator fatigue on hand-held machines and reduced demands on light-duty motor units, while maintaining performance in materials such as cast iron, tempered steel, non‑ferrous metals and engineering plastics. Universal compatibility and practical use cases Equipped with a cylindrical shank, the bit is universally compatible with standard three-jaw chucks, making it suitable for most bench and hand Drilling Machines. The DIN 1897 designation ensures dimensional conformity for consistent clamping and interchangeability. This Twist Drill is particularly suitable for thin-walled constructions like sheet metal, profiles and assemblies where space constraints demand a short tool that still offers robust cutting action. Who benefits from this Twist Drill Workshop professionals and maintenance technicians who need a reliable, compact metal drill for hand-held or angle drilling will value the MetavCUT extra-short Twist Drill. It is designed for users who prioritise tool stability, quick chip evacuation and consistent hole quality over long overhangs. The product is also suitable for smaller production runs and repair jobs where machine access is limited. Strong recommendation: Choose the MetavCUT extra-short Twist Drill Type N for demanding metal drilling tasks and contact METAV Werkzeuge for expert guidance — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 56026-FDA Diameter: 2.6 mm Point Angle: 118° Type: Type N Material: HSS‑G Standard: DIN 1897 Execution: Extra short Colour: Bright finished Shank Design: Cylindrical Spiral Length: 14 mm Total Length: 43 mm Intended For: Drills for metal / Hand Drilling Machine Model Series: Standard Line Shaft Finish: Zylinder (Cylindrical shank) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill from MetavCUT used? The MetavCUT Twist Drill Type N is primarily used for drilling in high‑strength materials and larger diameters; its extra-short form is ideal for stable operation and for machining alloyed and unalloyed steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Which three drill types are commonly distinguished? Three common drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category designed for metalworking applications. Why are Twist Drills sharpened at the tip? The tip sharpening of the MetavCUT Twist Drill reduces the cross‑cut at the tip, lowering friction and therefore the required feed force, while improving centring of the tip in the workpiece. Can the MetavCUT Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; however, metal drills are easier to resharpen and show less self‑feed tendency. At which drilling depths is the Twist Drill most commonly used? Spiral or Twist Drills are most commonly used for through drilling; for diameter ranges up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the prevalent tool for conventional drilling tasks. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to HSS is incorrect; evaluate working conditions carefully to decide whether the higher cost of HSSE is justified for your MetavCUT Twist Drill application.
2.75mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, Ø 2.75 mm, 118° tip, short, Black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N short is a precision HSS metal drilling bit for Drilling Machines and Hand Drills, designed for accurate holes in steel and non‑ferrous metals. Precision Ø 2.75 mm for fine metalwork 118° tip for improved centring on curved surfaces Short HSS design for higher Stability and reduced runout Conforms to DIN 338 for consistent Quality Suitable for Drilling Machines and Hand Drills Engineered for stability and reliable hole quality The HSS construction of this Twist Drill offers a blend of hardness and toughness that suits routine metalworking. The short execution reduces overhang and minimizes bending, resulting in higher Precision for critical holes. For workshop environments where repeatability matters, the shorter flute length improves tool life and lowers the risk of breakage when drilling diameters below typical thresholds. Tip geometry and spiral profile for dependable centring With a 118° tip angle and the classic Type N normal spiral, this drill bit enters softer and medium‑hard materials with reliable centring and predictable chip formation. The geometry is particularly helpful when starting holes on slightly curved surfaces or when a fast penetration without excessive contact is required. Users of Drilling Machines or Hand Drills benefit from predictable behaviour during feed, especially on alloyed and unalloyed steels. Compliance with standards and easy maintenance Manufactured to DIN 338 for short cylindrical‑shank twist drills, this bit follows established tolerances for length and shank dimensions. The HSS material also allows straightforward re‑sharpening, which means workshops can restore cutting edges economically without sacrificing concentricity. For customers who want consistent batch quality and traceable specifications, the DIN classification provides clear guidance on selection and replacement. Practical application and recommended users This Twist Drill from MetavCUT is aimed at professional workshops, maintenance technicians and advanced hobbyists who require dependable metal drilling performance. It is best used for steel, cast iron, non‑ferrous metals and certain plastics where the Type N spiral performs well. The short design is beneficial for setups where rigidity is essential, such as on drill presses or when using small hand drills that require stable, repeatable results. For precision metalworking tasks the MetavCUT Twist Drill Type N short is recommended — METAV Werkzeuge provides expert technical support and can advise on suitability and additional specifications: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 400275-FDA Diameter: 2.75 mm Spiral length: 33 mm Overall length: 61 mm Tip angle: 118° Type: Type N Execution: short Material: HSS (High Speed Steel) Application: Drills for metal Suitable for: Drilling Machine, Hand Drill Colour: black Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The Twist Drill from MetavCUT, Type N, is primarily applied when machining high‑strength materials and larger drill diameters in metalworking. This form is easy to re‑grind and withstands higher loads, making it suitable for demanding workshop and industrial applications. Which 3 drill types are there? There are three main drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for steels and similar materials.
Reliable performance for daily drilling
The Standard line is a versatile series of HSS (high-speed steel) twist drills, also described as standard twist drills or precision HSS twist drills, engineered for everyday industrial and workshop use. Positioned between economy options and specialist pro-grade tools, the standard line delivers consistent, repeatable results for regular drilling tasks without the need for high-cost alloys.
How the standard line performs in practice
Designed as precision ground (HSS‑G) twist drills, the standard line combines a refined manufacture process with a classic geometry. A typical 118° tip and a cleanly formed point give good penetration and reliable centring, while extremely smooth flute surfaces support efficient chip evacuation. The result is stable running, improved hole quality and extended tool life under normal production and maintenance conditions.
Key advantages that matter on the shop floor
- Reduced rework thanks to high concentricity and precise hole quality
- Lower tool consumption through enhanced wear resistance from precision grinding
- Faster cycle times via efficient chip removal from smooth flutes
- Broad applicability across common materials: steel, cast iron, sintered metal, plastics and non‑ferrous metals
- Ideal balance of performance and cost for workshops, maintenance teams and assembly lines
Technical data
- Material: HSS (high-speed steel)
- Manufacture: precision ground (HSS-G)
- Tip angle: 118° (typical)
- Features: smooth flutes, optimised point geometry, excellent concentricity
- Applications: unalloyed steel, low-alloy steel, cast iron, sintered metal, plastics, non‑ferrous metals
Why Metav is the smart sourcing choice
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of technical know-how with a broad assortment, making high-quality measuring and workshop tools accessible to small and large operations alike. With over 48,000 customers, more than 250,000 products and a logistics hub in Emmerich, Metav offers dependable supply and a curated quality filter for the european market — the sensible route to equip your shop with standard line twist drills and complementary tooling.
FAQ
What materials are standard line twist drills suitable for?
The standard line twist drills are suitable for unalloyed and low‑alloy steel, cast iron, sintered metal, plastics and non‑ferrous metals, matching typical workshop and light industrial requirements.
How does the precision ground (HSS‑G) design benefit drilling results?
Precision ground manufacture increases concentricity and improves cutting edge finish, which leads to better hole quality, reduced vibration and longer tool life compared with roll‑formed entry‑level drills.
Are standard line drills a substitute for pro‑grade specialist drills?
Standard line drills are intended as the reliable everyday option; they deliver consistent performance for regular production and maintenance but are not a replacement when extreme loads or specialised alloys demand pro‑grade materials.
Which synonyms should procurement teams use when searching for these tools?
Search terms such as “standard twist drills”, “HSS standard drills” or “precision HSS twist drills” will reliably lead to the standard line and comparable products.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com