Reliable drilling performance with Standard Line twist drill
Standard Line twist drill and standard drills deliver consistent, precision holemaking for daily industrial and workshop use, combining durable high-speed steel construction with precision-ground flutes to ensure excellent runout and chip evacuation. Designed for machining unalloyed and low-alloy steel, cast iron, sintered metal, plastics and non-ferrous metals, these drills provide a balanced mix of wear resistance and hole quality for routine production and maintenance tasks. Ideal for workshops, maintenance departments and assembly plants, the system offers a dependable, cost-effective solution between entry-level and heavy-duty ranges, featuring an optimised 118° point for good penetration and centring. Key advantages include precision-ground construction, excellent chip evacuation and consistent hole quality.
9.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Robuste Kombination aus HSS, kurzer Ausführung und 118° Spitzenwinkel sorgt für hohe Stabilität und saubere Bohrungen in Metall. Profitieren Sie von der Präzision der kurzen Bauweise und der Eignung für gängige Werkstoffe; bestellen Sie das Produkt direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT — kurzer HSS-Bohrer für Metall Der Spiralbohrer ist ein kurzer HSS-Bohrer nach DIN 338, ausgelegt für präzise Metallbohrungen an Hand- und stationären Maschinen. MetavCUT Spiralbohrer »40099-FDA« HSS kurz Für Metallbearbeitung und Handbohrmaschinen geeignet Kurze Bauweise für höhere Stabilität und Präzision Typ N Normalspirale für gängige Stahlarbeiten 9,9 mm Durchmesser für Standardanwendungen Hohe Stabilität durch kurze Bauweise für saubere Bohrungen Die kurze Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren in Stahl und Guss. Durch die verminderte Biegebelastung entsteht weniger Laufunruhe, sodass saubere Bohrungen mit geringerer Nachbearbeitung möglich sind. Anwender profitieren von geringerer Bruchgefahr und konstanteren Bohrbildern bei mittleren Durchmessern. Materialeigenschaften von HSS und Bedeutung für die Praxis HSS steht für Schnellarbeitsstahl und kombiniert Elastizität mit Schnittfestigkeit, was insbesondere bei Bohrungen unter 6 mm das Bruchrisiko senkt. Bei einem Durchmesser von 9,9 mm ermöglicht HSS dennoch zähere Schnitte in legierten und unlegierten Stählen sowie in Nichteisenmetallen. Für Anwender bedeutet das eine zuverlässige Werkzeuggleistung auch bei wechselnden Materialqualitäten. Normgerecht und praxistauglich: DIN 338 und Typ N erklärt Die Norm DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft und gibt Fertigungs- und Abmessungsrichtlinien vor, die Wiederholgenauigkeit und Austauschbarkeit sichern. Die Typ N Normalspirale ist die klassische Ausführung für Metall und bietet eine ausgewogene Spanabfuhr für mittlere Werkstoffe. Das Resultat ist planbare Qualität bei der Bearbeitung von Blechen, Profilen und Maschinenbauteilen. Anwendungshinweise für saubere Ergebnisse und lange Standzeiten Vor dem Bohren empfiehlt sich ein Anpunktieren oder Zentrieren, um das Wandern des Bohrers zu minimieren. Bei 9,9 mm Durchmesser ist direkter Bohrbetrieb möglich, bei hoher Präzision aber zusätzliches Anpunkten sinnvoll. Kühlschmierstoffe verlängern die Standzeit von HSS deutlich; bei zähen Werkstoffen ist reduzierte Vorschubgeschwindigkeit zu empfehlen, um Überhitzung zu vermeiden. Für wen dieses Werkzeug entwickelt wurde Dieser Bohrer richtet sich an Werkstätten, Maschinenbauer und ambitionierte Heimwerker, die robuste und genormte Werkzeuge für Metallarbeiten benötigen. Die kurze Bauform ist besonders geeignet für Arbeiten an festen Spannvorrichtungen und stationären Säulenbohrern sowie für Einsätze, bei denen Stabilität und Genauigkeit wichtiger sind als Reichweite. Empfehlung: Setzen Sie auf die bewährte Qualität von MetavCUT und wählen Sie den kurzen HSS-Bohrer für präzise Metallbohrungen; bei Fragen erreichen Sie unseren technischen Vertrieb direkt über info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Bezeichnung: Spiralbohrer Hersteller: MetavCUT Material: HSS (Schnellarbeitsstahl) Norm: DIN 338 Typ: Typ N SKU: 40099-FDA Fakten Durchmesser: 9,9 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Ausführung: kurz Farbe: schwarz Für Bohrmaschine: Handbohrmaschine HSS: Schnellarbeitsstahl für metallische Werkstoffe DIN 338: Norm für kurze Spiralbohrer mit Zylinderschaft FAQ Welche Werkstoffe eignen sich für diesen Spiralbohrer? Der MetavCUT Spiralbohrer (Typ N, HSS, SKU 40099-FDA) ist geeignet für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; für sehr zähe Werkstoffe sollte Kühlschmierstoff eingesetzt werden. Ist der kurze Bohrer für Handbohrmaschinen verwendbar? Ja, die kurze Ausführung des MetavCUT Spiralbohrers ist für Handbohrmaschine und stationäre Maschinen geeignet und bietet durch reduzierte Auskraglänge mehr Stabilität. Warum ist der Spitzenwinkel 118° relevant? Ein Spitzenwinkel von 118° erleichtert das Anbohren und ist besonders vorteilhaft bei gängigen Metall- und Nichteisenwerkstoffen, da er gute Zentrierung und effiziente Spanbildung ermöglicht.
9.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Spiralbohrer 47099-FDA von MetavCUT — kurzer HSS‑E Bohrer für Metall Der Spiralbohrer 47099-FDA ist ein kurzer HSS‑E Spiralbohrer für präzise Metallbohrungen an Handbohrmaschinen und stationären Maschinen. Kurze Ausführung für erhöhte Stabilität HSS‑E mit 5% Kobalt für härtere Werkstoffe Geschliffener Schaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für Edelstahl und gehärteten Stahl Gesamtlänge 133 mm, Spirallänge 87 mm Mehr Stabilität und Präzision beim Metallbohren Die kurze Ausführung dieses Spiralbohrers reduziert die Auskraglänge und minimiert damit Vibrationen sowie Verbiegen beim Bohren. Das Ergebnis sind saubere Bohrlöcher und ein geringeres Bruchrisiko, besonders bei anspruchsvollen Metallarbeiten. Anwender profitieren von höherer Vorschubstabilität und gleichbleibender Maßhaltigkeit selbst bei wiederholten Bohrvorgängen. Materialqualität und Schnittverhalten für harte Werkstoffe Der Bohrer besteht aus HSS‑E (Hochlegierter Schnellarbeitsstahl) mit 5% Kobalt, was die Rotbeständigkeit und Verschleißfestigkeit erhöht. Durch die Legierung bleibt die Schneide auch bei höheren Temperaturen länger scharf, sodass das Werkzeug bei Stahl, Gusseisen und Nichteisenmetallen zuverlässige Standzeiten liefert. Ein Vorteil ist die Kombination aus Zähigkeit und Schnitthaltigkeit für anspruchsvolle Einsätze. Vielseitige Anwendung für Werkstatt und Montage Mit einem Durchmesser von 9,9 mm gehört dieser Bohrer in den Standard‑Bereich und eignet sich sowohl für Handbohrmaschinen als auch für stationäre Säulenbohrmaschinen. Für präzise Ergebnisse empfiehlt sich punktgenaues Anpunkten vor dem Bohren. Das macht den Bohrer zur guten Wahl für Werkstätten, Montagen und für industrielle Instandsetzungsarbeiten, bei denen Alltagstauglichkeit und Zuverlässigkeit gefragt sind. Normgerecht gefertigt und auf Genauigkeit ausgelegt Der Spiralbohrer erfüllt die Vorgaben der DIN 338, was die Typisierung als kurze Spiralbohrer mit Zylinderschaft bestätigt. Die geschliffene Fertigung sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit, ideal für saubere Bohrbilder. Anwender sollten beim Bohren in dicken Werkstücken Kühlung einsetzen und bei Bedarf stufenweise aufbohren, um beste Ergebnisse zu erzielen. Sichern Sie sich den MetavCUT Kurzbohrer aus der Standard Line für präzise Metallbearbeitung und profitieren Sie von Verfügbarkeit und fachkundiger Beratung direkt aus Emmerich — bei Rückfragen eMail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47099-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Hersteller: MetavCUT Norm: DIN 338 Daten Durchmesser: 9,9 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-E (Hochlegierter Schnellarbeitsstahl) Legierung: 5% Kobalt Schaftausführung: geschliffen Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Typ: Typ N (Normalspirale) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) FAQ Für welche Materialien ist dieser Spiralbohrer geeignet? Der MetavCUT Spiralbohrer 47099-FDA ist für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoff ausgelegt und liefert dank HSS‑E mit 5% Kobalt gute Standzeiten bei härteren Werkstoffen. Kann der Bohrer in einer handgeführten Akkubohrmaschine verwendet werden? Ja, der Spiralbohrer aus der Standard Line ist für Handbohrmaschinen geeignet; bei starkem Vorschub oder sehr harten Materialien empfiehlt sich eine stationäre Maschine oder reduzierter Vorschub zur Verlängerung der Lebensdauer. Worin liegt der Vorteil der geschliffenen Schaftausführung? Die geschliffene Ausführung sorgt für hohe Rundlaufgenauigkeit und scharfe Schneiden, wodurch der Bohrer präzise und saubere Bohrlöcher erzeugt, ideal für Metallbearbeitung mit engen Toleranzen. Warum ist der Spitzenwinkel 135° wichtig? Ein Spitzenwinkel von 135° reduziert das Einstechen bei harten Werkstoffen wie Edelstahl und sorgt für kontrollierteres Anbohren sowie verringerte Ausrissbildung an der Austrittskante. Welche Norm beschreibt diesen Bohrertyp und was bedeutet das? Die DIN 338 spezifiziert kurze Spiralbohrer mit Zylinderschaft; bei diesem MetavCUT Spiralbohrer bedeutet das standardisierte Abmessungen und Fertigungsqualität, die für industrielle Anwendungen geeignet sind.
9.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 9.9 mm, 135° tip, short, bright finished, HSS‑G, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS‑G drill for precision metal drilling, designed for use in hand and machine drilling applications. Short design for improved stability 135° tip for hard materials HSS‑G fully ground for precise holes Conforms to DIN 338 for metalworking Precision and performance for demanding metalwork Designed for accurate metal drilling, this HSS‑G short Twist Drill delivers consistently clean holes with high roundness. The fully ground geometry produces very sharp cutting edges and excellent runout characteristics, which reduces burr formation and improves hole quality. For users seeking reliable results in alloyed and unalloyed steels, the combination of Type N spiral and a 135° point angle supports controlled penetration and reduces lateral wandering during the initial drill entry. Short length for stability and faster operation Because the bit has a reduced protruding length, the short design significantly increases rigidity and lowers the tendency to bend under load. This leads to measurable workflow benefits: the grinded HSS geometry enables drilling up to 40% faster while requiring 50% less feed force compared with conventional HSS variants. Contractors and workshop technicians working on small setups or clamped workpieces profit from improved precision and less chatter when using a compact, robust drill of this design. Geometry and materials optimised for hard materials The 135° tip angle is chosen specifically to assist drilling into harder materials such as stainless steel and tempered components; a larger point angle shortens initial bite time while maintaining tool life. The designation DIN 338 classifies this short Twist Drill with a cylindrical shank and describes the ground manufacturing process; grinding (HSS‑G) creates sharp cutting lips but can make the tool more brittle, so coolant and steady machine setup are advisable to avoid premature breakage. Who benefits and practical usage advice This Twist Drill is targeted at professional users and advanced hobbyists needing reliable metal drilling — especially for precision work on lathe‑mounted or stationary drilling machines and well‑supported handheld drilling operations. The fully ground shank ensures good chucking accuracy; for best results, secure the workpiece, use appropriate cutting fluid and moderate feed, and avoid excessive overhang. MetavCUT’s short series is particularly suitable when stability and accuracy are priorities over reach. Strongly recommended: choose the MetavCUT short HSS‑G Twist Drill Type N for demanding metal applications — for personalised technical advice and ordering support contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45099-FDA Diameter: 9.9 mm Tip angle: 135° Type: Type N Execution: Short Colour: Bright finished Material: HSS‑G Shank finish: Fully ground Spiral length: 87 mm Overall length: 133 mm For drill machine: Drilling Machine (Hand drill) Model series: Standard Line Norm: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit them best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is especially effective on alloyed and unalloyed steels, cast materials and non‑ferrous metals. Its geometry and 135° point make it suitable for harder workpieces where accurate centring and reduced walking are required. Which three drill types are commonly distinguished? In general practice three main categories are identified: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for machining metallic materials. Can the MetavCUT Twist Drill be used in a handheld drill or only in machine tools? The short design of the MetavCUT Twist Drill Type N improves rigidity and makes it suitable for both well‑supported handheld drilling and stationary machine tools; however, optimum precision is achieved in clamped or machine setups with appropriate cooling. Why is the tip of a Twist Drill ground to a specific angle? The 135° tip on the MetavCUT Twist Drill reduces initial cutting forces and improves centring in hard materials; grinding the tip also reduces the cross‑cut width, lowering friction and the required feed, which helps achieve cleaner holes with less tool wear.
9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short, Ø 9 mm, 118° tip, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N short is a high‑stability HSS metal drill designed for precise holemaking in steel and other metals with a 9 mm diameter and a 118° tip angle. Short HSS design for enhanced stiffness 9 mm diameter for standard metal holes 118° tip for reliable centering Complies with DIN 338 for short twist drills Black finish for corrosion resistance Precision and durability from HSS material High Speed Steel (HSS) gives this Twist Drill outstanding elasticity and resistance to fracture during common metalworking tasks. The HSS composition is especially suitable for drilling alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics, providing dependable tool life under typical workshop conditions. The short execution reduces flex and vibration, resulting in consistently round holes and longer tool service intervals. Better control and centering with a 118° tip A 118° point angle improves centering on curved or slightly irregular surfaces and reduces walking at the drill start, which is useful when producing clean, accurate holes in softer steels and aluminium. Because the tip geometry affects feed forces and heat generation, this configuration balances penetration speed and control for general metalworking. Users benefit from fewer re‑drills and faster set‑up when precision is required. Stable short design according to DIN 338 Manufactured to DIN 338, the short twist drill format prioritises stiffness and dimensional accuracy. This Type N short design minimizes overhang from the chuck, lowering the risk of bending and enabling higher feed rates on both portable and stationary drilling machines. MetavCUT’s adherence to this standard means predictable performance and interchangeability with other DIN‑compliant tooling in professional environments. Practical use recommendations for workshop and on‑site work When using this MetavCUT Twist Drill in a drilling machine or a hand drill, moderate cutting speeds and steady feed ensure optimal results; excessive speed can shorten tool life. For holes up to moderate depths, the short overall length (125 mm) and spiral length (81 mm) improve chip evacuation and reduce runout. Professionals and serious hobbyists will appreciate the combination of robustness and ease of resharpening that HSS tools offer. Highly recommended: For precise metal drilling choose the MetavCUT Twist Drill Type N short in HSS for reliable centering and enhanced stiffness — for personalised technical advice METAV Werkzeuge provides expert consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40090-FDA Diameter: 9 mm Point angle: 118° Type: Type N Colour: black Version: short Material: HSS Standard: DIN 338 Spiral length: 81 mm Overall length: 125 mm Application: Drills for metal For use with: Drilling Machine / Hand Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N short best used for? The MetavCUT Twist Drill Type N short is intended primarily for drilling metal; it excels in producing accurate holes in alloyed and unalloyed steel, cast iron and non‑ferrous metals thanks to its HSS construction and short, stiff geometry. Can this Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill short execution can be used in a hand drill or a drilling machine, but best results come from steady speeds and controlled feed to maintain centering and to avoid excessive wear. What are Twist Drills used for? Twist Drills are mainly applied when machining high‑strength materials and larger diameters. Their form allows straightforward resharpening and sustains higher loads; the design suits metalworking and larger bore tasks. Which three drill types exist? There are three principal drill types: Metal drills, Wood drills and Stone/Concrete drills.
9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill – Short HSS‑E Type N, Ø 9 mm, 135°, 5% Cobalt‑Alloyed, DIN 338 (MetavCUT) The Twist Drill from MetavCUT is a short Type N drill for precise metalworking, especially suited to drilling hard and alloyed steels with a 135° tip angle. Short design for high stability 135° tip for hard materials Fully ground flutes for precise holes HSS‑E with 5% cobalt for heat resistance Conforms to DIN 338 for short drills Greater Precision through Short Design and Material Choice The short Execution reduces overhang and increases Stability, which is particularly beneficial when machining hard metals. Manufactured in HSS‑E with 5% Cobalt‑Alloyed composition, the tool offers improved heat resistance and wear behaviour compared with standard HSS. As a result, operators achieve cleaner holes and longer tool life when performing demanding Metalworking tasks on stationary or portable Drilling Machines. Clean Holes and High Runout Accuracy with Ground Geometry A Fully ground flute geometry produces very sharp cutting edges and excellent Runout Accuracy, ideal for precision applications. The Type N spiral geometry is the classic choice for Metal Drilling and generates reliable chip evacuation in many alloys. Note that ground drills can be more brittle than rolled variants, therefore using appropriate cooling and careful feed rates on tougher Materials is recommended to avoid breakage. Designed for Metalworking: Recommended Applications and Users This MetavCUT Twist Drill is intended for drilling Alloyed and Unalloyed Steel, Cast Iron, Non‑Ferrous Metals and certain Plastics; it is well suited to workshop technicians, maintenance teams and precision machinists. The short overall length and stable shank make it especially useful for operations requiring minimal deflection, such as jig and fixture work or when using a Hand Drill for controlled site repairs. 135° Point Angle: Faster Penetration and Better Centering in Hard Materials A 135° Point Angle helps reduce the tendency to wander on the surface of hard materials and shortens the initial penetration time compared with steeper points. This geometry lowers the cutting forces on the central tip and improves centring on Stainless Steel and other tough alloys, enabling more dependable starts and reducing the need for pilot operations in many cases. Standard Compliance and Practical Handling Notes Conforming to DIN 338 ensures consistent dimensions and interchangeability for short Twist Drills with cylindrical shank. The Standard Line manufacturing and the Fully Ground Shaft Execution ensure predictable performance across batches. For best results, pair the drill with appropriate coolant and moderate spindle speeds when working in high‑tensile steels; this preserves edge integrity and reduces the risk of chipping. Strong recommendation: choose the MetavCUT Twist Drill (Short Type N, HSS‑E) for demanding metal drilling tasks — for tailored advice or supplementary technical data contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 47090-FDA Diameter: 9 mm Point angle: 135° Type: Type N Execution: Short Colour: 5% cobalt-alloyed Material: HSS‑E Shaft execution: Fully ground Overall length: 125 mm Spiral length: 81 mm Model series: Standard Line Norm: DIN 338 For drilling machine: Drilling Machine (Hand Drill) Application: Drills for metal Packaging unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its geometry allows straightforward regrinding and it withstands greater mechanical loads, making it a standard choice for robust Metalworking tasks. Which three drill types exist? Common categories are Metal drills, Wood drills and Stone/Concrete drills, and the MetavCUT Twist Drill belongs to the Metal drill group suited for ferrous and non‑ferrous Materials. Can the MetavCUT Twist Drill be used for wood? The MetavCUT Twist Drill can be used in Wood, but as a Metal drill it offers less guidance and a rougher finish than dedicated Wood drills; it is easier to resharpen and shows lower self‑feeding tendency compared with specialised wood brad point drills.
9mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill by MetavCUT — 9 mm, 135° Tip, Extra Long, Bright Finished, HSS‑G, DIN 1869, Fully Ground Shank A Twist Drill designed for deep metal drilling with Drilling Machines and engineered for high precision and reduced feed force. Extra long design for deep drilling HSS‑G ground for faster metal cutting 135° tip geometry for hard materials Fully ground shank for high runout accuracy Conforms to DIN 1869 for demanding applications Faster drilling with lower feed force for efficient workflows The HSS‑G construction delivers up to 40% faster drilling while requiring 50% less feed force compared with conventional HSS drills, making it ideal where productivity matters. Designed as an extra long variant, this drill enables deeper hole depths and greater reach without sacrificing concentricity. For workshop and industrial use, the combination of high cutting speed and reduced operator exertion translates into measurable time savings and less operator fatigue. Reliable centring and clean holes even in tough alloys With a 135° tip angle and a ground flute geometry, this tool penetrates harder materials more effectively and reduces walking at the start of the hole. The CNC ground flutes provide sharp cutting edges and excellent runout accuracy, resulting in precise, burr‑reduced holes in Grauguss, legierten and unlegierten Stahl, and non‑ferrous metals. The geometry is optimised to support drilling in applications up to the material classes indicated by DIN 1869. Built for deep and difficult penetrations The extended overall length and a spiral length of 175 mm allow drilling where standard lengths fail, for example deep assemblies or awkward fixturing. The bright finished surface offers good chip evacuation characteristics in conjunction with appropriate coolant, while the fully ground shank ensures consistent clamping in chucks and reduced vibration. Use with a suitable Drilling Machine and controlled coolant flow for best results in prolonged or stationary operations. Who benefits and how to use it correctly Manufacturers, toolrooms and maintenance teams that require repeatable, precise holes in harder metals will value this design. For optimal life and performance, use stable fixturing, appropriate spindle speeds and coolant when working with high‑strength steels. Because ground HSS drills can be more brittle than rolled types, avoid excessive lateral loading and prefer stationary machine setups for deepest holes and continuous production runs. Strong recommendation: Choose the MetavCUT Twist Drill for precise deep‑hole metalworking — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge for expert support via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 32090-FDA Diameter: 9 mm Tip Angle: 135° Execution: Extra long Total Length: 250 mm Spiral Length: 175 mm Material: HSS‑G Shank Execution: Fully ground Colour: Bright finished Application: Drills for metal For Drilling Machine: Drilling Machine Standard: DIN 1869 Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily intended for drilling into metals; its HSS‑G composition and 135° tip make it especially suitable for alloyed and unalloyed steels, cast iron and non‑ferrous metals. Use in a properly set up Drilling Machine with cooling for best results. Which three general drill types exist? The three main drill categories are metal drills, wood drills, and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for metalworking tasks.
9mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Twist Drill, Diameter 9 mm, 135° Tip, Extra Long, Bright Finished, HSS‑G, DIN 1869 The Twist Drill is an extra‑long HSS‑G drill bit for drilling machines, designed for deep metal drilling and precise holemaking in alloyed and unalloyed steels. Extra long design for deep drilling 9 mm diameter with 135° tip angle HSS‑G fully ground for precise bores Conforms to DIN 1869 for deep‑hole work Precision and material: ground HSS for clean metal holes The fully ground HSS‑G geometry delivers high concentricity and sharp cutting edges, producing clean, precise holes in metal. Grinding the flutes rather than rolling creates a sharper cutting profile, which reduces chatter and improves roundness when used with appropriate feed and coolant. This makes the bit particularly suitable for alloyed and unalloyed steel, cast iron and non‑ferrous metals where hole quality and dimensional accuracy are required. Deep drilling capability: extra length for difficult access With an extra long overall length and an extended spiral, this design allows drilling in deep parts or where access from the rear is restricted. The extended spiral assists chip evacuation during deeper cuts, reducing the risk of clogging. For tasks requiring long reach, the extra‑long execution provides the working length necessary without compromising guidance when used in a suitable drilling machine and with correct cooling. Tip geometry and performance: 135° for harder materials A 135° tip angle reduces the tendency to wander and shortens centring time on harder workpieces such as stainless steel. The larger tip angle reduces the aggressiveness of the lead, distributing cutting forces over a broader area and often requiring less feed force. For demanding materials, the combination of tip geometry and HSS‑G composition improves tool life when adequate coolant and a stable setup are used. Practical use and user group: suited for workshops and industrial settings This twist drill was developed for professional workshops and industrial users who need reliable deep drilling in metals. It is best applied in drilling machines under steady clamping and with cooling. Compared with rolled types, the ground version can be re‑sharpened more easily to renew cutting edges, making it advantageous for users who perform maintenance on tooling and value reproducibility and finish. Strong recommendation: Choose the MetavCUT Twist Drill in extra‑long HSS‑G execution for demanding deep metal drilling — for technical advice or to confirm suitability for a specific application, METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33090-FDA Diameter: 9 mm Tip Angle: 135° Execution / Type: Extra Long Colour: Bright Finished Material: HSS‑G Shaft Execution: Fully Ground Spiral Length: 220 mm Overall Length: 320 mm Standard: DIN 1869 Application: Drills for Metal Model Series: Standard Line For Use In: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily applied for drilling high‑strength workpieces and larger diameters in metal; its extra‑long HSS‑G design and DIN 1869 specification make it suitable for deep drilling where extended reach and durable cutting performance are required. Which three drill types exist? Common categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks. For what is a Twist Drill mainly used? A Twist Drill is mainly used for machining high‑strength materials and larger hole diameters; its form allows straightforward resharpening and it withstands higher loads in demanding applications. Why are twist drills pointed? The point reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction and feed forces while improving centring in the workpiece; a pointed geometry therefore eases penetration and enhances accuracy.
9mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long Twist Drill, 9 mm, 135° tip, HSS‑G, Bright Finished (MetavCUT) The Twist Drill is an extra‑long HSS‑G drill designed for deep metal drilling with a 9 mm diameter and a 135° tip for hard materials. Extra‑long design for deep, hard‑to‑reach holes 9 mm Diameter for precise metal drilling 135° Tip angle optimised for harder materials HSS‑G ground for fast, clean cuts DIN 1869 compliant for demanding deep‑hole work Precision and performance for deep metal holes The MetavCUT extra‑long HSS‑G twist drill combines a generous overall length with a long Spiral to enable deep‑reach drilling where standard lengths fall short. Thanks to the fully ground flute geometry, the bit produces very sharp cutting edges and high run‑out accuracy, which results in cleaner, more precise holes in metals. For workshop and industrial environments this means fewer re‑cuts, improved fit‑up of components and more predictable machining results under challenging conditions. Faster cutting with less feed force The ground HSS‑G material and optimised geometry allow up to 40% faster drilling and require up to 50% less feed force compared with conventional HSS drills. This makes the tool especially effective when working with alloyed and unalloyed steel, cast steel, cast iron and non‑ferrous metals. The 135° tip angle reduces initial cutting resistance and improves centring on harder materials, shortening set‑up time and increasing throughput on serial operations. Reliable choice for demanding standards and deep drilling Conforming to DIN 1869, this twist drill is built for deep‑hole applications and tougher conditions. The Spiral length of 280 mm and total length of 410 mm are tailored for situations that require extended reach without compromising hole quality. Because the flutes are formed by CNC grinding rather than rolling, users benefit from superior surface finish and dimensional accuracy—features that matter when subsequent machining or assembly demands tight tolerances. Practical workshop guidance and safe use When using this extra‑long Twist Drill in tougher materials, stationary mounting and adequate cooling are recommended to avoid brittle fracture and to extend tool life. The fully ground shank supports better clamping accuracy in chucks and collets, reducing vibration and ensuring concentricity. For operators less familiar with deep‑hole techniques, using modest spindle speeds, steady feed and cutting fluid will deliver the best balance between speed and tool life. Who benefits from this tool This drill is aimed at metalworkers, toolrooms and maintenance professionals who require extended reach and high‑quality holes in harder materials. Whether producing components in small series or performing repair work on assemblies where access is limited, the MetavCUT twist drill offers a practical combination of depth capability and metal‑cutting performance. Strongly recommended: the MetavCUT extra‑long HSS‑G Twist Drill for reliable deep metal drilling — for technical advice or application support contact METAV Werkzeuge; we provide comprehensive consultation and sample guidance via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT Model series: Standard Line Diameter: 9 mm Total length: 410 mm Spiral length: 280 mm Tip angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: Extra long Colour: Bright finished Shaft finish: Fully ground Suitable for: Drilling Machine / Hand drill Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill best suited for? The MetavCUT Twist Drill (extra‑long HSS‑G Twist Drill) is particularly suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics, offering robust performance where higher strength and precision are required. Is the MetavCUT Twist Drill suitable for very deep holes? Yes, the MetavCUT extra‑long Twist Drill is designed for deep holes: its extended overall length and the Spiral length make it suitable for deep‑reach applications, and compliance with DIN 1869 underlines its suitability for demanding drilling tasks. For what is a Twist Drill used? It is mainly used for machining high‑strength materials and large bore diameters. This design is easy to resharpen and withstands higher loads. Which three drill types exist? There are metal drills, wood drills and stone/concrete drills. Why are Twist Drills tipped/sharpened? Sharpening reduces the secondary cutting edge at the tip of the Twist Drill, lowering friction forces and thus requiring less feed force while improving centring in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill can be used in wood but gives poorer guidance and a less clean result; it is easier to regrind and has lower self‑feeding characteristics. For which depths is the Twist Drill the most used tool? A full‑bore hole is made with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool.
9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 9 mm, 135° tip, short, bright finished, HSS-G, DIN 338 (MetavCUT) A short, precision Twist Drill Type N designed for metalworking with a 9 mm diameter and a 135° point angle for stable, clean drilling in hard materials. Short design for higher stability HSS‑G ground for fast, precise drilling 135° point for hard materials like stainless steel Conforms to DIN 338 for short cylindrical drills Fully ground shank for excellent concentricity Durable HSS‑G construction for reliable metalworking The HSS‑G material offers a balance of hardness and edge retention that benefits demanding metalworking tasks. Built as a ground High Speed Steel tool, this short drill delivers sharp cutting edges and high runout accuracy, which reduces burr formation and improves hole quality. For users who prioritize precision, the ground geometry translates into cleaner bores and fewer reworks, while the bright finished surface aids chip evacuation during cutting. Short design increases stability and precision A reduced overall length and a shorter Spiral length improve stiffness during drilling, so less bending occurs under load. This compact geometry is particularly useful when machining legiertem und unlegiertem Stahl and other hard metals, where a rigid tool axis is essential. The shorter overhang results in increased feed stability, enabling higher feed rates in many setups without sacrificing hole accuracy. 135° tip and Type N spiral for hard materials The 135° point angle is tailored to cut into harder materials with reduced tendency to wander at entry, making it suitable for stainless steel and other tougher alloys. As a Type N (normal spiral) configuration, the tool is optimized for metal drilling rather than soft substrates. For less experienced users: a larger tip angle decreases the initial cutting aggressiveness and improves centering, which helps when starting holes in tough components. Precise shank and DIN 338 compliance for machine use With a fully ground shank, the drill provides excellent concentricity and grip in standard drill chucks and toolholders, reducing runout and wear. Conformance to DIN 338 ensures standardized dimensions and compatibility with common tool setup procedures in production and workshop environments. These characteristics make the tool well suited to both stationary machines and portable drilling machines used in metal fabrication. Who benefits and recommended applications Mechanical workshops, toolrooms and production engineers working with steels, cast materials and non‑ferrous metals will find the short Twist Drill especially advantageous for precision holemaking. Its properties support drilling in components where surface finish and positional accuracy matter. For simple explanations: HSS‑G denotes a ground High Speed Steel drill, Type N indicates the classic metal spiral, and the 135° tip suits harder substrates. Strong recommendation: For precision metal drilling choose the MetavCUT short Twist Drill Type N with HSS‑G ground geometry — METAV Werkzeuge offers expert advice and technical support if needed. If unsure whether this tool meets specific requirements or if additional technical data is required, please contact us — 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45090-FDA Diameter: 9 mm Point angle: 135° Type: Type N Execution: short Overall length: 125 mm Spiral length: 81 mm Shank execution: fully ground Material: HSS-G Finish: bright finished For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Norm: DIN 338 Colour: bright finished Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Type N drill? The Twist Drill by MetavCUT, Type N, is primarily used for drilling metal; it is ideal for legiertes und unlegiertes Stahl, Gussstahl, Gusseisen and non‑ferrous metals. The Type N spiral and HSS‑G ground geometry ensure reliable cutting in harder materials and give good hole quality in workshop and production settings. Which three drill types exist and where does the MetavCUT Twist Drill fit? Three common drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill is a metal drill (Type N) and is specifically engineered for use in metalworking rather than for wood or stone. Why is the tip of a Twist Drill sharpened and how does that help in practice? The tip sharpening reduces the cross‑cut edge at the drill point, lowering friction and required feed force. For the MetavCUT Twist Drill Type N this means easier entry, better centering and reduced heat generation, resulting in cleaner holes and longer tool life when combined with appropriate cooling. Can the MetavCUT Twist Drill be used for drilling wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but it will usually offer less guidance and a rougher finish than a dedicated wood drill. Metal drills are easier to resharpen and exhibit less self‑feeding, so they may require more careful positioning when used in timber.
9mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short HSS-G Type N, 9 mm, 135°, TiN-coated, DIN 338 The Twist Drill is a short HSS-G metalworking drill bit (Type N) designed for precision drilling in hard materials and optimised for use in drilling machines. Short design for higher stability TiN-coated for extended tool life Fully ground shank for cleaner holes 135° tip for hard metals and stainless steel Conforms to DIN 338 for short drill bits Durable Material and Coating for Long Service Life The short HSS-G construction combined with the TiN-coated surface reduces friction and wear during metalworking, which translates into a significantly longer lifetime under continuous use. With a 9 mm diameter and a flute length of 81 mm, this bit is especially suited for alloyed and unalloyed steel, cast iron, sintered iron, nickel silver, copper, bronze and hard plastics. The TiN layer lowers surface temperature and, when used with appropriate cooling, decreases abrasive wear and maintains cutting performance over prolonged operations. Stable Short Design for Precise, Efficient Drilling Thanks to the reduced overhang of the short execution, this Twist Drill provides superior stability and resists bending under load, enabling more accurate hole positions and improved concentricity. The fully ground geometry yields sharp cutting edges and high running accuracy, allowing up to 40% faster penetration and requiring about 50% less feed force compared with conventional HSS drills. These advantages make it a reliable choice for demanding production and workshop environments where precision and throughput matter. Optimised Tip Geometry and Suitable Applications The 135° point angle is tailored for harder materials and stainless steel: it shortens the initial penetration time and improves centring on tough surfaces. As a Type N normal-spiral bit, the tool excels at general metal drilling tasks and is intended primarily for use with drilling machines. Typical fields of application include maintenance, toolrooms and manufacturing where metals such as steel, cast components and non-ferrous alloys must be drilled with repeatable quality. Compliance, Manufacturing and Best Practice Manufactured according to DIN 338 as a short, cylindrical-shank Spiral Drill, this product is produced as a ground (HSS-G) variant, which implies CNC-ground flutes for sharp edges and precise geometry. Ground drills generally offer cleaner holes and better accuracy than roll-formed types, though they can be somewhat more brittle and therefore are recommended for use with suitable coolant and in predominantly stationary mounting conditions. For optimal results, pair the bit with controlled speeds, adequate coolant and a solid clamping system. For precision metalworking, choose the MetavCUT Twist Drill Type N with TiN coating — for technical advice or to confirm suitability, METAV Werkzeuge provides expert consultation via email info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 46090-FDA Diameter: 9 mm Flute Length (Spirallänge): 81 mm Total Length (Gesamtlänge): 125 mm Point Angle (Spitzenwinkel): 135° Type: Type N Execution (Ausführung): short Shank Finish (Schaft-Ausführung): fully ground Coating (Farbe): TiN-coated Material: HSS-G Standard (Norm): DIN 338 Application: Drills for metal / Bohrer für Metall Intended Machine (Für Bohrmaschine): Drilling Machine / Handbohrmaschine Model Series (Modellserie): Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The MetavCUT Twist Drill Type N is primarily applied to machining high-strength materials and larger hole diameters; it performs well on alloyed and unalloyed steels and similar metals. Its form allows easier regrinding and it endures considerable loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The main categories are Metal drills (such as the MetavCUT Twist Drill), Wood drills and Masonry/Concrete drills. Each type is optimised in geometry and material for its intended substrate.
9mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
MetavCUT Twist Drill — Twist Drill, 9 mm, 135° tip, Long, Bright finished, HSS‑G, DIN 340 The MetavCUT Twist Drill is a long HSS‑G Twist Drill engineered for deep, precise metal drilling in demanding applications with a 9 mm diameter and a 135° tip. Long HSS‑G Twist Drill for deep holes 9 mm diameter for precise metal drilling 135° tip for hard materials like stainless steel Fully ground shank for high runout accuracy Conforms to DIN 340 for deep hole performance High cutting performance for tough metals Designed to handle challenging materials, this long HSS‑G Twist Drill excels in drilling legierte und unlegierte Stahl grades and cast irons. The larger 135° tip angle reduces entry forces for harder workpieces and improves centring, while the long flute length allows access to recessed holes. Users benefit from faster advance and reduced effort, since the ground geometry promotes a sharper cutting edge and cleaner chip removal. Precise geometry for accurate bores A fully ground shaft and CNC‑ground flutes ensure high runout accuracy and consistently round holes, which is critical when machining components that require tight tolerances. The ground manufacturing method yields very sharp edges and precise tolerance control; however, the harder geometry is best used with appropriate feed, cooling and, for portable setups, cautious handling to avoid brittle breakage. Practical advantages in workshop and production Because the long variant follows DIN 340, it is suited for deeper bores, bushings and situations with limited accessibility. The bright finished surface aids visual inspection and reduces initial friction during entry. For metalworking tasks in small series or repair work the tool reduces rework thanks to cleaner holes, making it an efficient choice where reliability and repeatability matter most. Who benefits and how to use it safely Engineers, toolroom technicians and maintenance professionals profit from the combination of HSS‑G hardness and long design when working on automotive, mechanical and maintenance applications. When using this Twist Drill in stationary machines, apply cutting fluid and moderate speed for best life expectancy. For handheld Drilling Machines, maintain firm guidance and lower advance rates to minimise breakage risk. We recommend the MetavCUT long HSS‑G Twist Drill for demanding deep metal bores — for personalised advice, drill parameter recommendations or further technical data contact METAV Werkzeuge: info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 53090-FDA Diameter: 9 mm Total length: 175 mm Spiral length: 115 mm Tip angle: 135° Material: HSS‑G Execution: Long Colour: Bright finished Shank execution: Fully ground Standard: DIN 340 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill is primarily intended for metalworking and is applied for drilling in high‑strength and cast materials where long, stable bores are required; it is especially suitable for deep holes and hard materials. Can the MetavCUT Twist Drill be re‑sharpened and reused? Yes, the MetavCUT Twist Drill made of HSS‑G can be re‑sharpened by grinding; attention should be paid to preserving the original tip angle and flute geometry to maintain performance. For what are Twist Drills used? The MetavCUT Twist Drill is mainly used when machining high‑strength materials and larger diameters; its form is relatively easy to re‑grind and it stands up to higher loads. Which 3 drill types exist? The main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill type. Why are Twist Drills pointed? The point grind reduces the cross‑cut at the tip of the MetavCUT Twist Drill, lowering friction and required feed forces while improving centring accuracy in the workpiece. Can you drill wood with a Twist Drill? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to re‑sharpen and have less self‑feed. At which drilling depths is the Twist Drill most used? Solid drilling for diameters up to around 20 mm and depths up to 100 mm is the most frequent use case; the MetavCUT Twist Drill is a common choice for such through‑holes and deep bores. What is better, HSS or HSSE? Choosing between HSS and HSSE depends on working conditions; the common assumption that HSSE is universally superior is incorrect — evaluate whether the application justifies the higher cost relative to the actual material and speed demands.
9mm Spiralbohrer, 118° Spitzenwinkel, HSS, Morsekegel, rollgewalzt, 87mm Spirallänge - MetavCUT
Profitieren Sie von der Kombination aus HSS-Material und rollgewalzter Fertigung für erhöhte Zähigkeit und verringertes Bruchrisiko bei Standardbohrungen. Nutzen Sie die Morsekegelschaft für sichere Drehmomentübertragung bei Ständerbohrmaschinen. Bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere Beratung an. Spiralbohrer von MetavCUT — Standard Line (SKU 54090-FDA) Der Spiralbohrer für Metall mit rollgewalzter HSS-Ausführung und Morsekegelschaft bietet belastbare Leistung für Werkstatt und Maschinenpark. HSS rollgewalzt für erhöhte Zähigkeit Morsekegelschaft für sichere Drehmomentübertragung Norm DIN 345 für standardisierte Einsätze 9 mm Durchmesser, 168 mm Gesamtlänge Spitzenwinkel 118° für leichtes Eindringen Haltbarkeit durch Materialwahl und Fertigungsverfahren für robuste Einsätze Die HSS-Legierung in Kombination mit der rollgewalzten Herstellung macht den Bohrer zäher und bruchsicherer als geschliffene Alternativen in vergleichbaren Einsatzbereichen. Diese Fertigungsweise reduziert das Bruchrisiko bei Durchmessern unter 6 mm, bleibt aber auch bei 9 mm robust, wenn es um Bohrungen in legierten und unlegierten Stahl, Guss und Nichteisenmetallen geht. Daraus ergibt sich ein klarer Vorteil in Arbeitsumgebungen, in denen Standzeit und Wirtschaftlichkeit zählen. Sichere Aufnahme und Kraftübertragung für stationäre Maschinen Für den Einsatz in Ständerbohrmaschinen und ähnlichen stationären Maschinen sorgt die Morsekegelschaft für selbsthemmende Verbindung und präzise Drehmomentübertragung. Der Bohrer eignet sich besonders dort, wo hohe Kräfte übertragen werden müssen und ein fixer Sitz in der Aufnahme gefordert ist. Durch die Kombination aus Schaftform und Konstruktion lassen sich Wiederholbohrungen mit stabiler Laufruhe und reduziertem Rundlaufrisiko erreichen. Einsatzbereich und Anwendungsempfehlungen für Metallbearbeitung Der Bohrer ist ausgelegt für allgemeine Metallbohrung bis etwa 900 N/mm² Festigkeit, einschließlich Grauguss, Temperguss und Sintereisen. Beim Bohren in dünnen Blechen empfiehlt sich Vorzentrierung, bei dichten oder zähen Werkstoffen Kühlschmierstoff zu verwenden, um Spananhäufung zu vermeiden. Der Spitzenwinkel 118° erleichtert das Eindringen in weichere Materialien und unterstützt sauberes Ansetzen auf gewölbten Flächen. Präzision und Handling im Arbeitsalltag Mit einer Spirallänge von 87 mm und einer Gesamtlänge von 168 mm bietet der Bohrer guten Spantransport und Reichweite für viele Standardaufgaben. Die DIN 345-Konformität sichert Kompatibilität mit gängigen Normen im Maschinenbau und Instandhaltung. Anwender erhalten damit ein Werkzeug, das bekannte Anforderungen in Werkstatt und Fertigung zuverlässig abdeckt, ohne aufwendige Spezialspannmittel zu benötigen. Setzen Sie auf die MetavCUT Standard Line für belastbare Metallbohrungen und ordern Sie den Spiralbohrer direkt über Metav oder kontaktieren Sie die Fachberatung per eMail unter info@metav-werkzeuge.com bzw. telefonisch Produktmerkmale Artikelnummer: 54090-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 9 mm Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Verpackungseinheit: 1 Besonderheiten Material: HSS Ausführung: rollgewalzt Schaftausführung: Morsekegel — selbsthemmend, hohe Drehmomentübertragung Norm: DIN 345 Farbe: schwarz FAQ Welche Materialien lassen sich mit dem Spiralbohrer bearbeiten? Der MetavCUT Spiralbohrer aus der Standard Line (SKU 54090-FDA) eignet sich für Stahl, legierte und unlegierte Werkstoffe, Guss und Nichteisenmetalle sowie Kunststoffe, solange die Festigkeit 900 N/mm² nicht deutlich überschreitet. Ist die Morsekegelschaft für Ständerbohrmaschinen geeignet? Ja, die Morsekegelschaft des MetavCUT Spiralbohrers bietet eine selbsthemmende Aufnahme, die für Ständerbohrmaschinen und Maschinen mit entsprechender MK-Aufnahme optimale Kraftübertragung ermöglicht. Wie unterstützt die rollgewalzte Fertigung die Einsatzdauer? Die rollgewalzte Herstellung macht den HSS-Bohrer zäher und reduziert das Bruchrisiko insbesondere bei kleineren Durchmessern; die MetavCUT Standard Line profitiert somit von besserer Standzeit bei Standardbohrungen. Welchen Spitzenwinkel hat der Bohrer und warum ist das wichtig? Der Spiralbohrer besitzt einen Spitzenwinkel von 118°, was ein leichteres Eindringen in weichere Materialien und ein verbessertes Ansetzen auf gewölbten Oberflächen ermöglicht.
Reliable performance for daily drilling
The Standard line is a versatile series of HSS (high-speed steel) twist drills, also described as standard twist drills or precision HSS twist drills, engineered for everyday industrial and workshop use. Positioned between economy options and specialist pro-grade tools, the standard line delivers consistent, repeatable results for regular drilling tasks without the need for high-cost alloys.
How the standard line performs in practice
Designed as precision ground (HSS‑G) twist drills, the standard line combines a refined manufacture process with a classic geometry. A typical 118° tip and a cleanly formed point give good penetration and reliable centring, while extremely smooth flute surfaces support efficient chip evacuation. The result is stable running, improved hole quality and extended tool life under normal production and maintenance conditions.
Key advantages that matter on the shop floor
- Reduced rework thanks to high concentricity and precise hole quality
- Lower tool consumption through enhanced wear resistance from precision grinding
- Faster cycle times via efficient chip removal from smooth flutes
- Broad applicability across common materials: steel, cast iron, sintered metal, plastics and non‑ferrous metals
- Ideal balance of performance and cost for workshops, maintenance teams and assembly lines
Technical data
- Material: HSS (high-speed steel)
- Manufacture: precision ground (HSS-G)
- Tip angle: 118° (typical)
- Features: smooth flutes, optimised point geometry, excellent concentricity
- Applications: unalloyed steel, low-alloy steel, cast iron, sintered metal, plastics, non‑ferrous metals
Why Metav is the smart sourcing choice
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of technical know-how with a broad assortment, making high-quality measuring and workshop tools accessible to small and large operations alike. With over 48,000 customers, more than 250,000 products and a logistics hub in Emmerich, Metav offers dependable supply and a curated quality filter for the european market — the sensible route to equip your shop with standard line twist drills and complementary tooling.
FAQ
What materials are standard line twist drills suitable for?
The standard line twist drills are suitable for unalloyed and low‑alloy steel, cast iron, sintered metal, plastics and non‑ferrous metals, matching typical workshop and light industrial requirements.
How does the precision ground (HSS‑G) design benefit drilling results?
Precision ground manufacture increases concentricity and improves cutting edge finish, which leads to better hole quality, reduced vibration and longer tool life compared with roll‑formed entry‑level drills.
Are standard line drills a substitute for pro‑grade specialist drills?
Standard line drills are intended as the reliable everyday option; they deliver consistent performance for regular production and maintenance but are not a replacement when extreme loads or specialised alloys demand pro‑grade materials.
Which synonyms should procurement teams use when searching for these tools?
Search terms such as “standard twist drills”, “HSS standard drills” or “precision HSS twist drills” will reliably lead to the standard line and comparable products.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com