Reliable drilling performance with Standard Line twist drill
Standard Line twist drill and standard drills deliver consistent, precision holemaking for daily industrial and workshop use, combining durable high-speed steel construction with precision-ground flutes to ensure excellent runout and chip evacuation. Designed for machining unalloyed and low-alloy steel, cast iron, sintered metal, plastics and non-ferrous metals, these drills provide a balanced mix of wear resistance and hole quality for routine production and maintenance tasks. Ideal for workshops, maintenance departments and assembly plants, the system offers a dependable, cost-effective solution between entry-level and heavy-duty ranges, featuring an optimised 118° point for good penetration and centring. Key advantages include precision-ground construction, excellent chip evacuation and consistent hole quality.
3.5mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer (Body Drill) — 3.5 mm, 135° Tip, Double‑Sided, Bright Finished, Fully Ground, HSS‑G The Karosseriebohrer is a precision Body Drill designed for metalworking applications, offering a 3.5 mm Diameter, 135° Point Angle and a double‑sided execution with a bright finished surface and fully ground shaft for reliable performance. Double‑ended design for extended tool life Fully ground HSS‑G for precise, clean holes 135° Point Angle optimised for harder metals Suitable for Drilling Machine and Hand Drill use Compact overall length of 55 mm for confined spaces Maximum cutting performance with fully ground HSS‑G The fully ground HSS‑G construction delivers a clear benefit: faster penetration and improved hole quality in metal. CNC grinding creates sharp cutting edges and high concentricity, which reduces wobble and produces clean, round holes. For users requiring precise results in alloyed or unalloyed Steel, Cast Steel, Cast Iron or non‑ferrous Metals, this basis of construction reduces the needed feed force and raises productivity without sacrificing accuracy. Double‑ended design for practical durability in bodywork A double‑sided, short Twist Drill is particularly practical in sheet‑metal and body applications: when one tip becomes blunt, the tool can simply be reversed, offering effectively two operational ends. This space‑saving and cost‑efficient solution is well suited for work on thin sheets, rivet holes and repair operations where quick tool change and robustness matter. 135° point for harder materials and stable centring The 135° Point Angle reduces walking and offers better centring on harder materials like stainless Steel; a larger tip angle shortens the time to engage the workpiece. When paired with the ground flute geometry, this Karosseriebohrer achieves lower friction at the tip and more consistent chip evacuation. For demanding drilling tasks, combine coolant and moderate speeds to balance performance and tool life. Designed for professionals in confined and metalworking environments With an overall length of 55 mm and a 3.5 mm Diameter, this tool from the Standard Line by MetavCUT is aimed at metalworkers, bodyshop technicians and maintenance professionals who require compact, reliable Twist Drills for production and repair. The bright finished surface supports smooth insert and removal, while the robust geometry keeps cycle times short and hole quality high. Choose the MetavCUT Karosseriebohrer with 135° Point Angle for dependable metal drilling — for tailored advice or specification support METAV Werkzeuge provides expert consultation by eMail at info@metav-werkzeuge.com, by Phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Karosseriebohrer Marke: MetavCUT SKU: 58035-FDA Diameter: 3.5 mm Overall Length: 55 mm Spiral Length: 13 mm Point Angle: 135° Execution: Double‑sided Shaft Finish: Fully ground Material: HSS‑G For Machine: Drilling Machine / Hand Drill Colour: Bright finished Model Series: Standard Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Karosseriebohrer Twist Drill used for? The Karosseriebohrer from MetavCUT is a Twist Drill primarily used for machining high‑strength materials and larger drill diameters in metalworking. Its double‑ended design and ground HSS‑G geometry make it suitable for bodywork, thin‑sheet holes and tasks that demand quick reversal of a blunt tip while maintaining precision. Which 3 drill types are there? There are three common drill categories: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Karosseriebohrer is classified as a Metal drill (Twist Drill) tailored to metal applications rather than wood or masonry.
3.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Die Kombination aus HSS-G-Geschliff, Gesamtlänge 165 mm und Tieflochspirale ermöglicht präzise und tiefe Bohrungen in Stahl und Gusswerkstoffen; die geschliffene Ausführung reduziert Anpresskraftbedarf und verbessert die Rundlaufgenauigkeit. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 3,5 mm (MetavCUT) – extra lang Der Spiralbohrer ist für tiefe Bohrungen in Metall konzipiert und eignet sich für Handbohrmaschine und stationäre Anwendungen, insbesondere bei legierten und unlegierten Stählen. Geschliffener HSS-G für saubere Bohrlöcher Extra lange Gesamtlänge 165 mm für tiefe Bohrungen 135° Spitzenwinkel für harte Werkstoffe Tieflochspirale für verbesserte Spanabfuhr Geeignet für Handbohrmaschine und stationäre Maschinen Präzision und Materialeigenschaften für saubere Bohrlöcher Der geschliffene HSS-G-Schaft sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere und maßhaltige Bohrlöcher in Stahl, Gussstahl und Gusseisen ermöglicht. Die CNC-geschliffene Geometrie reduziert das Wandern beim Anbohren und erhöht die Standzeit unter kontrollierten Bedingungen. Für das Bohren in schwer zerspanbaren Werkstoffen empfiehlt sich die Verwendung von Kühlschmierstoff, um Hitzeentwicklung zu minimieren und die Bruchgefahr bei geschliffenen Kanten zu verringern. Tiefe Bohrungen sicher und wirtschaftlich ausführen Mit einer Gesamtlänge 165 mm und einer Spirallänge 115 mm ist dieser Spiralbohrer speziell für extra tiefe Bohrungen ausgelegt, bei denen Standardlängen nicht ausreichen. Die Tieflochspirale verbessert die Spanabfuhr auch bei längeren Bohrungen, reduziert Nacharbeit und erhöht die Prozesssicherheit. Bei sehr tiefen Löchern empfiehlt sich die schrittweise Bohrung und regelmäßige Spanableitung, damit die effiziente Schnittfähigkeit erhalten bleibt. Optimierte Geometrie für harte Werkstoffe Der 135° Spitzenwinkel verkürzt die Anbohrphase in harten Werkstoffen und reduziert den Vorschubbedarf; das resultiert in bis zu 40 % schnellerem Bohren und bis zu 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten unter ähnlichen Bedingungen. Diese Vorteile machen den Bohrer zur wirtschaftlichen Wahl für anspruchsvolle Metallbearbeitung, insbesondere wenn saubere Passungen und genaue Bohrmaße gefordert sind. Praxisempfehlung für Werkstatt und Montage Der Durchmesser positioniert den Bohrer im Standard-Bereich, ideal für den Alltag in Werkstatt, Montage und DIY-Projekten. Vor dem Bohren wird punktuelles Anreißen empfohlen, um das Wandern zu vermeiden; bei legierten Stählen ist Kühlschmierstoff sinnvoll. Für stationäre Arbeiten liefert die Kombination aus geschliffener Schaftausführung und stabiler Aufnahme die beste Performance, während bei Handbohrmaschine auf ruhige Führung und angemessene Drehzahl geachtet werden sollte. Empfehlen wir: Den MetavCUT Spiralbohrer als solide Lösung für tiefe Metallbohrungen direkt über Metav Werkzeuge bestellen oder unsere technische Beratung per eMail info@metav-werkzeuge.com kontaktieren Produktmerkmale Artikelnummer: 32035-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: extra lang Modellserie: Standard Line Daten Durchmesser: 3,5 mm Gesamtlänge: 165 mm Spirallänge: 115 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen, hohe Schärfe) Norm: DIN 1869 Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall SKU: 32035-FDA FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer mit HSS-G-Material und 135° Spitzenwinkel eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen und Nichteisenmetalle sowie Hartkunststoff; bei zähen Werkstoffen wird Kühlschmierstoff empfohlen. Ist der Bohrer für Handgebrauch geeignet? Ja, der Bohrer ist für die Verwendung mit Handbohrmaschine geeignet, da der Durchmesser in den Standard-Bereich fällt; dennoch empfiehlt sich bei tiefen Bohrungen eine stationäre Führung oder ruhige Handhabung zur Vermeidung von Verkantung. Welche Vorteile bringt die geschliffene Ausführung? Die geschliffene Schaftausführung des Spiralbohrers sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was präzisere Bohrlöcher und eine effizientere Spanabfuhr ermöglicht; als Trade-off ist eine kontrollierte Anwendung und Kühlung ratsam. Wie tief darf ich mit diesem Bohrer sicher bohren? Dank der Tieflochspirale und der langen Arbeitslänge sind extra tiefe Bohrungen möglich; für sehr tiefe Löcher empfiehlt sich schrittweises Aufbohren und regelmäßige Spanableitung, um Verstopfungen zu vermeiden. Worauf ist bei der Drehzahl und dem Vorschub zu achten? Bei härteren Werkstoffen wie legiertem Stahl reduziert der 135° Spitzenwinkel die Anbohrzeit, dennoch sollten Drehzahl und Vorschub materialgerecht angepasst werden und Kühlschmierstoff eingesetzt werden, um die Standzeit zu erhöhen.
3.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — HSS‑G Extra Long, 3.5 mm, 135° (Bright Finished, Fully Ground Shank, DIN 1869) The Twist Drill is an extra‑long HSS‑G metal drill designed for deep, precise holes in hard materials when used with a Drilling Machine. Extra‑long design for deep hole drilling HSS‑G for high performance in hard metals 135° Point Angle for stainless steel and alloys Fully ground shank for concentricity and precision DIN 1869 standard for demanding industrial use Faster penetration and lower feed force for efficient machining The Twist Drill from MetavCUT combines an HSS‑G material composition with a ground flute geometry that enables up to 40% faster drilling and requires approximately 50% less feed force compared with conventional HSS drills. This efficiency reduces operator effort and tool wear during repetitive Metalworking tasks, making it particularly suitable for workshops and maintenance operations where throughput matters. The performance advantage translates directly into shorter cycle times and more predictable production. Precise holes thanks to CNC grinding and optimised point geometry A fully ground shank and flutes produce a very sharp cutting edge and excellent run‑out behaviour, resulting in cleaner, more accurate holes in tough materials. The 135° Point Angle is optimised for harder materials such as Stainless Steel and alloyed Steels, shortening initial entry time and improving centring. For users unfamiliar with grinding terminology: “fully ground” means the flutes are shaped by CNC grinding rather than rolled, which yields higher concentricity and superior hole finish at the cost of higher brittleness under misuse. Built for deep and hard‑to‑reach drilling applications With an Overall Length of 210 mm and a Spiral Length of 145 mm, this extra‑long design is intended for deep hole drilling and access into recessed or hard‑to‑reach areas. The geometry follows DIN 1869 for deep‑hole twist drills and is frequently employed for diameters up to 20 mm and depths approaching 100 mm in many metalworking scenarios. Users should employ adequate clamping and coolant when drilling deep holes to preserve tool life and maintain hole quality. Clear suitability and targeted user groups This tool addresses the needs of professional machinists, maintenance technicians, toolroom staff and industrial workshops that require reliable metal drilling performance. The combination of HSS‑G material, sharp CNC grinding and a specialised point angle makes it a good choice for drilling Legated and Unlegated Steel, Cast Iron, Sintered Iron and certain Non‑Ferrous Metals. For hobbyists, the drill can be used in a bench or hand Drilling Machine when setup and coolant are applied correctly. For demanding deep‑hole metalworking we recommend MetavCUT’s extra‑long Twist Drill — for individual technical advice and application support contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33035-FDA Model Series: Standard Line Diameter: 3.5 mm Overall Length: 210 mm Spiral Length: 145 mm Point Angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: Extra long Shank Finish: Fully ground Finish / Colour: Bright finished For Machine: Drilling Machine (Hand Drill) Application: Drills for Metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily applied in the machining of high‑strength materials and when larger drill diameters are required; its form is easy to sharpen and it withstands substantial loads, which makes it suitable for demanding Metalworking tasks. Which three basic drill types exist? For general use, drill types are categorised as Metal Drill, Wood Drill and Stone/Masonry Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metals. Why are Twist Drill tips often re‑ground? Re‑grinding the tip of a MetavCUT Twist Drill reduces the cross‑cut at the tip, lowering friction and thus the required feed force while improving centring and drilling control. Can a Metal Twist Drill be used for Wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with dedicated Wood Drills; however, Metal Drills are easier to re‑sharpen and show less self‑feeding tendency.
3.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der MetavCUT Spiralbohrer in HSS-G-Ausführung kombiniert hohe Schnittgeschwindigkeit, extra lange Bauform und präzisen CNC-Schliff zu einer Lösung für tiefe Metallbohrungen; die geschliffene Geometrie sorgt für saubere Bohrbilder und die Tieflochspirale nach DIN 1869 ermöglicht sichere Spanabfuhr unter erschwerten Bedingungen, bei Bedarf technische Beratung direkt über Metav anfordern. Spiralbohrer von MetavCUT, HSS‑G, 3,5 mm Spiralbohrer von MetavCUT für Metallbohrungen, extra lange Ausführung für tiefe und schwer zugängliche Löcher MetavCUT HSS‑G Ausführung für Stahl und Guss Extra lange Bauform, Gesamtlänge 265 mm Geschliffene Schaftausführung für hohe Rundlaufgenauigkeit Tieflochspirale nach DIN 1869 für bessere Spanabfuhr Spitzenwinkel 135° optimiert für härtere Werkstoffe Mehr Leistung bei anspruchsvollen Metallbohrungen Die HSS-G-Legierung bietet deutlich reduzierte Anpresskraft und ermöglicht laut Hersteller ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten. Für Anwender bedeutet das messbar kürzere Taktzeiten und weniger Ermüdung beim Bohren in legiertem und unlegiertem Stahl sowie in Gusswerkstoffen. Die Kombination aus geschliffener Geometrie und Tieflochspirale liefert saubere, präzise Bohrbilder und erleichtert das Nachbearbeiten. Präzision und Handhabung durch geschliffene Verarbeitung Die voll geschliffene Schaft- und Spiralgeometrie resultiert in scharfen Schneiden und hoher Rundlaufgenauigkeit, was besonders bei Passungsbohrungen relevant ist. Diese Qualität bietet Vorteile in der Serienfertigung und bei anspruchsvollen Einzelteilen. Wegen der höheren Sprödigkeit geschliffener Werkzeuge empfiehlt sich der Einsatz mit geeigneter Kühlung und, wo möglich, eine Spannvorrichtung oder stationäre Aufnahme, um die Lebensdauer zu maximieren. Extra lange Bauform für tiefe Bohrungen Mit einer Gesamtlänge 265 mm und einer Spirallänge 180 mm ist die Ausführung speziell für tiefe Bohrungen ausgelegt, bei denen Standardlängen an ihre Grenzen stoßen. Die Tieflochspirale nach DIN 1869 verbessert die Spanabfuhr deutlich und reduziert die Gefahr von Verstopfungen in langen Bohrgängen. Für sichere Ergebnisse empfehlen sich moderate Vorschübe, ausreichende Kühlung und bei sehr langen Bohrtiefen schrittweises Aufbohren. Einsatzzwecke und Zielgruppe Die Ausführung richtet sich an Werkstätten, Metallbauer und anspruchsvolle Heimwerker, die präzise Bohrungen in Grauguss, legierten und unlegierten Stahl bis 1000 N/mm², Gusseisen sowie Nichteisenmetalle und Hartkunststoffe ausführen müssen. Die Kombination aus MetavCUT-Qualität und Standard Line Verarbeitung macht den Bohrer zur praktischen Wahl für Anwender, die auf Verlässlichkeit und lange Einsatzfähigkeit setzen. Empfehlung: Auf die extra lange MetavCUT HSS‑G Ausführung setzen und für tiefe Metallbohrungen direkt über Metav beziehen — telefonisch +49 2822 7131930 oder per eMail info@metav-werkzeuge.com; SKU 34035‑FDA verfügbar. Produktmerkmale Artikelnummer: 34035-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 3,5 mm Gesamtlänge: 265 mm Spirallänge: 180 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Norm: DIN 1869 Ausführung: extra lang Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Ist der Bohrer für Edelstahl und gehärtete Werkstücke geeignet? Der MetavCUT Spiralbohrer HSS‑G 3,5 mm (SKU 34035‑FDA) ist für gehärtete Werkstoffe bis etwa 1000 N/mm² ausgelegt; durch den Spitzenwinkel 135° lässt sich die Anbohrung bei härteren Materialien verbessern, Kühlung und angepasste Schnittparameter sind jedoch erforderlich. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, die Ausführung erlaubt den Einsatz mit einer Handbohrmaschine, allerdings empfiehlt das Standard Line Werkzeug bei der extra langen Bauform eine stabile Führung oder Spannvorrichtung, um Ablenkungen und Bruchrisiken zu minimieren. Was bedeutet geschliffen im Vergleich zu gewalzt? Bei geschliffenen Spiralbohrern wie dem MetavCUT Modell erfolgt die Formgebung der Spannuten durch CNC‑Schliff; das Ergebnis sind scharfe Kanten und hohe Rundlaufgenauigkeit, allerdings mit höherer Sprödigkeit im Vergleich zu gewalzten Bohrern. Wie tief lassen sich Löcher mit dieser Ausführung bohren? Die Gesamtlänge 265 mm und die Spirallänge 180 mm sind für tiefe Bohrungen ausgelegt; für besonders tiefe oder kritische Anwendungen empfiehlt sich schrittweises Aufbohren und kontinuierliche Kühlung, um Spanbildung und Erwärmung zu vermeiden. In welcher Verpackungsgröße wird der Bohrer geliefert? Der MetavCUT Spiralbohrer HSS‑G 3,5 mm wird in der Verpackungseinheit 10 geliefert (SKU 34035‑FDA), geeignet zur Versorgung von Werkstattarbeitsplätzen und für kleinere Serien.
3.5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill Type N — extra short, Ø 3.5 mm, 135°, bright finished, HSS‑G, DIN 1897 The Twist Drill Type N is an extra short HSS‑G drill bit designed for precision metalworking with hand Drilling Machines in confined spaces. Extra short HSS‑G design for high stability 135° point angle for hard materials Cylindrical shank for universal chuck fit Ideal for hand and angle Drills in tight spaces Conforms to DIN 1897 for consistent quality Faster, more controlled drilling for demanding metalwork The extra short geometry reduces flex and breakage risk when working with metal, delivering a more stable cutting action compared with standard lengths. The ground HSS‑G cutting edges enable up to a 40% faster drilling speed and require about 50% less axial force, which translates into reduced operator fatigue and more reliable hole quality. This makes the bit particularly suitable where precision and repeatability are required. Robust tip and geometry for hard materials A 135° point angle combined with the Type N normal spiral provides better centring and reduced walking in harder steels and stainless alloys. The blunter tip shortens the initial penetration time and distributes cutting loads, so drilling into tougher materials like tempered or alloyed steels becomes more efficient. This geometry helps to extend tool life while maintaining consistent hole geometry. Universal fit and practical handling in confined spaces The drill features a cylindrical shank that fits standard three‑jaw chucks, offering broad compatibility with typical hand and angle Drilling Machines. With a total length of 52 mm and a spiral length of 20 mm, the compact form factor is ideal for shallow holes, sheet metal, profiles and situations where access is limited. The bright finished surface aids chip evacuation and makes bit handling straightforward on the bench. Application focus and recommended uses Manufactured to DIN 1897 from HSS‑G, this Twist Drill is designed for drilling Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The extra short design is particularly advantageous when working with thin‑walled components or when the setup cannot accommodate longer tools. Users seeking a robust, easy‑to‑control solution for metal drilling will find reliable performance with this geometry and material combination. We recommend the MetavCUT Type N extra short Twist Drill for precision metalworking; for product advice or technical data contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 56035‑FDA Diameter: 3.5 mm Point angle: 135° Type: Type N Material: HSS‑G Execution: extra short Colour: bright finished Shank execution: cylindrical Spiral length: 20 mm Total length: 52 mm Norm: DIN 1897 Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for drilling in high‑strength materials and larger diameters; its extra short design is well suited to metalworking tasks where stability and reduced breakage are important. Can the MetavCUT Twist Drill Type N be used with a hand Drilling Machine? Yes, the MetavCUT Twist Drill Type N with a cylindrical shank is intended for use in common hand Drilling Machines and angle drills, offering universal chuck compatibility for workshop and on‑site applications. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their form is easy to re‑grind and they withstand considerable loads. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑cut at the tip of the Twist Drill, which lowers friction and therefore reduces the required feed forces while improving centring in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to re‑grind and have less self‑feeding action.
3.5mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — HSS-G, 3.5 mm, 118° point, Hexagonal Shank, Fully Ground, Silver, DIN 338 (MetavCUT) The Twist Drill delivers precise metal drilling for portable and stationary Drilling Machines with a 3.5 mm diameter and a 118° point angle, designed for demanding machining tasks. Fully Ground geometry for precise holes Hexagonal Shank for secure bit holders Optimised for metal: HSS-G material Conforms to DIN 338 for short twist drills Compatible with Hand and portable Drilling Machines Durable HSS-G Material for Reliable Metalworking This twist drill uses HSS-G (high-speed steel, ground), a material chosen for strength and cutting performance when machining metals. The ground flute geometry produces very sharp cutting edges and high concentricity, which helps achieve clean, precise holes in alloyed and unalloyed steel, cast materials and non-ferrous metals. Because the cutting edges are produced by CNC grinding rather than rolling, the tool cuts more efficiently, reducing the required feed force and improving surface finish for subsequent operations. Efficient Cutting Geometry that Saves Effort Engineered with a 118° point angle and fully ground flutes, the bit centres easily and penetrates softer metals and mixed materials with controlled chip evacuation. The specific grind reduces friction and can enable up to faster drilling rates compared with roll-formed equivalents while requiring less axial force. For professionals working on production or maintenance tasks, this means more consistent hole quality and reduced operator strain during repetitive drilling. Fast, Secure Changeover with Hexagonal Shank A Hexagonal Shank design ensures form-fit torque transmission in quick-change holders and bit chucks commonly found on cordless drivers and workshop holders. This improves resistance to cam-out and simplifies tool changes without compromising compatibility with standard chucks. The fully ground finish and silver surface also aid visibility of wear, assisting timely tool inspection and maintenance. Optimised Dimensions and Machine Compatibility With a 3.5 mm diameter, Flute Length 39 mm and Total Length 90 mm, this twist drill is dimensioned for through-holes and moderate-depth bores in metalworking tasks. Conformity to DIN 338 classifies this as a short twist drill suitable for both stationary machine tools and portable use, depending on application and coolant provision. For best results, use appropriate speeds, feeds and cooling when drilling hard materials to extend tool life. Strong recommendation: For precise metal drilling tasks, choose the MetavCUT Twist Drill with Fully Ground geometry; METAV Werkzeuge offers expert consultation if you are unsure whether this tool suits your application — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill / Spiralbohrer Brand: MetavCUT SKU: 57035-FDA Diameter: 3.5 mm Point angle: 118° Material: HSS-G (ground high-speed steel) Finish / Version: fully ground (geschliffen) Colour: Silver Shank: Hexagonal Flute length: 39 mm Total length: 90 mm Application: Drills for metal / Bohrer für Metall Model series: Standard Line Norm: DIN 338 For use in: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills from MetavCUT are primarily applied to machining high-strength materials and larger drill diameters; their ground geometry is easy to resharpen and withstands higher loads, which makes them suitable for demanding metalworking tasks. Which 3 drill types exist? Common drill categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for use in metalworking. Is the MetavCUT Twist Drill suitable for cordless drills? The MetavCUT Twist Drill with a Hexagonal Shank is compatible with quick-change holders and many cordless drivers, offering secure torque transmission; however, for heavy-duty metalwork a stationary Drilling Machine or proper cooling is recommended for best tool life. Why choose a fully ground MetavCUT Twist Drill over rolled versions? A fully ground Twist Drill from MetavCUT provides sharper edges and higher runout accuracy, leading to cleaner holes and often faster drilling with less feed force, though careful handling and cooling are advised to avoid brittle fracture.
3.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short, 3.5 mm, 135° point angle, TIN-coated, HSS‑G, DIN 338 The Twist Drill Type N short is a TIN‑coated HSS‑G metal drill designed for precise, stable drilling in hard materials with a 3.5 mm diameter and a 135° point angle. Short design for enhanced stability TIN-coated for extended tool life Fully ground shaft for high precision Optimised for hard metals such as steel Conforms to DIN 338 manufacturing standard Engineered for precision and longer tool life The short HSS‑G construction delivers high rigidity and precise hole quality even under tougher conditions. The TIN‑coating reduces friction and wear, which significantly extends the tool life when drilling metals. With a 3.5 mm diameter and a 135° point angle, the geometry is specifically suited to reduce walking on hard surfaces and to penetrate stainless and alloyed steels more effectively. This design helps achieve cleaner holes with less burr formation while maintaining long‑term performance. Best use cases in workshop and industry Choose this short Type N twist drill for demanding metalworking tasks on stationary drilling machines or robust hand drills where high stiffness and repeatable accuracy matter. The reduced overhang makes it ideal for short, deep plunge operations and for applications that require excellent concentricity. It is particularly recommended for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics where the combination of HSS‑G material and coating provides proven results. Faster drilling with lower effort and improved runout Thanks to the fully ground flute geometry, drilling can be up to 40% faster and require up to 50% less axial force compared with conventional untreated HSS tools in comparable conditions. The ground manufacture yields sharp cutting edges and excellent runout accuracy, which translates into superior surface finish and dimensional consistency. For workshop efficiency this means less rework and higher throughput on repetitive metal drilling tasks. Practical handling, cooling and resharpening guidance To maximise lifetime and safety, use appropriate coolant or cutting fluid; the TIN‑coating combined with cooling considerably reduces thermal load and wear. The 135° point angle shortens initial penetration time in harder materials, but the ground flute design can be more brittle than rolled variants—avoid excessive vibration and side loads. Re‑grinding is possible and practical: the tool geometry is straightforward to resharpen, restoring cutting edges and maintaining performance when required. Strong recommendation: For consistent professional results choose MetavCUT’s Twist Drill Type N short (HSS‑G, TIN‑coated) and contact METAV Werkzeuge for expert advice at info@metav-werkzeuge.com or by phone +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Data Designation: Twist Drill Marke: MetavCUT Diameter: 3.5 mm Point Angle: 135° Type: Type N Execution: short Coating: TIN‑coated Shaft: fully ground Material: HSS‑G Spiral Length: 39 mm Overall Length: 70 mm Application: Drills for metal For Use With: Drilling machine / hand drill compatible Standard: DIN 338 Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The Twist Drill from MetavCUT, Type N, is used primarily for machining high‑strength materials and larger drill diameters; its short design and high‑quality HSS‑G construction make it suitable for alloyed and unalloyed steel, temper castings, cast iron, sintered iron, copper, bronze and hard plastics. This form is easy to resharpen and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are: Metal drill (such as the MetavCUT Twist Drill), Wood drill, and Stone/Concrete drill. Why are twist drills resharpened? The Tip is reshaped to reduce the cross cutting edge at the point. Resharpening lowers friction forces so that less axial feed is required and improves centring of the drill in the workpiece, which enhances performance and hole quality. Can a Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal drills are easier to resharpen and have lower self‑feeding tendencies, yet they deliver less clean, well‑guided holes in timber.
3.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill (Spiralbohrer) – HSS‑G Twist Drill, 3.5 mm, 135°, long, bright finished, fully ground, DIN 340 by MetavCUT The Twist Drill is a long HSS‑G metal drilling tool designed for deep and hard‑material drilling with a 3.5 mm Diameter and a 135° Point Angle, suitable for use with a Drilling Machine. CNC‑ground HSS for faster, cleaner metal drilling Long DIN 340 design for deep or hard‑to‑reach holes 135° Point Angle optimised for harder materials Fully ground Shank for high concentricity and precision Bright finished surface for improved rust resistance Precision Grinding for Faster, Cleaner Holes High‑speed‑steel HSS‑G and CNC Grinding deliver clearly measurable benefits: the Ground Geometry produces very sharp Cutting Edges and excellent Roundness, which enables up to 40% faster drilling and requires significantly less Feed Force than conventional HSS drills. This means less heat buildup and fewer burrs when working in Alloyed and Unalloyed Steel, Cast Steel and Non‑Ferrous Metals. For users with limited technical background: HSS‑G stands for a Ground High‑Speed Steel variant offering superior Edge Sharpness and Hole Quality compared with rolled drills. Deep Drilling Capability with Reduced Friction The Long Execution in accordance with DIN 340 provides extended Overall Length and Spiral Length to reach deeper Bore Positions and recessed Holes. The 135° Point Angle reduces initial Cutting Forces and improves Centring in harder Workpieces such as Stainless Steel, while the Bright Finished surface helps reduce Friction at entry. Because Ground drills can be more brittle than rolled types, stationary use or steady Cooling is recommended when drilling deep or at high Speeds to avoid chipping. Designed for Professional Metalworking and Maintenance Tasks Target Groups include Workshops, Maintenance Teams and Precision Mechanics who require repeatable, high‑quality Holes in Metal. The Fully Ground Shank supports low Runout in hand‑held and bench Drilling Machines, delivering uniform Hole Diameter and longer Tool Life under correct operating conditions. For best results, use appropriate Cutting Fluid, moderate Speed and steady Feed. METAVCUT’s Standard Line aims to combine Reliability and economical Performance for everyday industrial demands. MetavCUT’s HSS‑G Twist Drill is recommended for demanding metal drilling tasks; for personalised technical advice or application support contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 53035-FDA Diameter: 3.5 mm Point Angle: 135° Execution: long (DIN 340 long execution for deeper holes) Overall Length: 112 mm Spiral Length: 73 mm Colour / Finish: Bright finished Shank Execution: Fully ground (geschliffen) Material: HSS‑G Application: Drills for Metal / Bohrer für Metall Model Series: Standard Line For Use With: Drilling Machine (Handbohrmaschine) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials is it suitable for? The Twist Drill by MetavCUT is primarily used for machining high‑strength materials and larger diameters; it is especially suitable for alloyed and unalloyed Steel, Cast Steel, Sintered Iron and Hard Plastics. Its Ground Geometry is easy to resharpen and withstands higher Loads while delivering precise Holes. Which three main drill types exist? The three main Drill Types are Metal Drills, Wood Drills and Stone/Concrete Drills; MetavCUT’s Twist Drill belongs to the Metal Drill category and is optimised for metalworking conditions.
3.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, 3.6 mm, 118°, black, DIN 338 A compact Twist Drill in Type N design for precise metal drilling with Hand and Drilling Machines. Short Type N HSS for stable metal drilling 3.6 mm Diameter for precise holemaking 118° Tip Angle for quick centring Conforms to DIN 338 for short twist drills Black finish for easy identification Precision and stability for metalworking results The short HSS construction provides higher rigidity and reduces deflection during machining, so users benefit from consistent hole geometry and lower breakage risk. With a 3.6 mm Diameter and a Total Length of 70 mm, the flute Length of 39 mm keeps the working length compact, improving run-out behaviour when used in Hand or Drilling Machines. For workshops that require repeatable, accurate holes in alloyed and unalloyed steel, this geometry supports reliable, repeatable performance. Designed for reliable centring and fast penetration A 118° Tip Angle balances centring and cutting speed: it enables easier initial penetration on slightly curved or coated surfaces while maintaining efficient chip removal. The Type N normal spiral profile is optimised for metalworking, which means that this short Twist Drill is particularly suited to jobs where guidance and straightness matter most. For less experienced users, the combination of tip geometry and short overhang reduces the need for complex fixturing. Durable material, easy to re-sharpen and maintain Manufactured from High Speed Steel (HSS), this short Twist Drill delivers elasticity under load and can be re-sharpened when wear occurs, extending useful life. The HSS composition lowers the risk of brittle fracture for Diameters under 6 mm, making it a pragmatic choice for general metal drilling. Conformity with DIN 338 ensures standardised dimensions and interchangeability with common chucks and holders used in many metalworking environments. Typical applications and the right users for the tool This Twist Drill is intended for Drilling for metal tasks such as steel, cast iron, non‑ferrous metals and certain plastics; it is a practical choice for professional Workshops, maintenance teams and skilled hobbyists who need robust, repeatable performance. The short execution supports operations on bench drills and portable drills where stability is a priority. For projects requiring deeper or specialised holes other geometries or lengths should be considered. Why choose this MetavCUT short twist drill Choosing this MetavCUT short Twist Drill Type N means opting for a tool that emphasises stability, serviceability, and standard compliance. The compact design reduces vibration and improves surface finish in typical metalworking contexts. If there is uncertainty whether this Twist Drill matches a specific machine or material, METAV Werkzeuge offers expert consultation to help select the correct geometry and material treatment for the task. Strong recommendation: Choose the MetavCUT short HSS Twist Drill Type N for precise metal holes — for technical advice or assistance contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 40036-FDA Type: Type N Material: HSS (High Speed Steel) Diameter: 3.6 mm Tip angle: 118° Execution: short Flute/Spiral length: 39 mm Total length: 70 mm Colour: black Suitable for: Drilling Machine / Hand Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drill diameters; its form is easy to re-sharpen and withstands significant loads, which makes it suitable for demanding metalworking tasks and ensures reliable performance in many workshop applications. Which three drill categories exist? Drill types are commonly divided into metal drills, wood drills, and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for steel, cast iron and non‑ferrous metals. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cut at the drills' point, which lowers friction and therefore requires less feed force; for the MetavCUT Twist Drill this sharpening also improves centring and helps achieve a cleaner hole entry with reduced walking. Can the MetavCUT Twist Drill be used for drilling wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance is inferior and hole finish is less clean compared with purpose‑made wood drills; however, metal drills are easier to re-sharpen and have less self‑feed tendency.
3.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill short HSS‑E, 3.6 mm, 135°, Type N, 5% cobalt-alloyed, fully ground, DIN 338 The Twist Drill short (Type N) is a HSS‑E metal drill designed for precise, stable drilling in hard materials using a Drilling Machine. Short design for high stability 135° point angle for hard metals 5% cobalt-alloyed HSS-E material Fully ground shank for precision Complies with DIN 338 standard Greater Precision through a Short, Rigid Design A shorter cutting length reduces overhang and bending, delivering higher stability and more accurate hole positioning. The short configuration of this Twist Drill is especially effective when tight tolerances are required, since the reduced length minimizes chatter and deflection. For operators aiming to improve repeatability on metal components, this design leads directly to fewer rejects and less rework. Heat-resistant Material and Sharp, Clean Cutting Built from HSS‑E with 5% cobalt-alloyed composition, this Twist Drill offers enhanced hot hardness and wear resistance during interrupted cuts or higher cutting speeds. The fully ground geometry creates very sharp cutting edges and excellent runout accuracy, producing cleaner holes in ferrous and non-ferrous metals. Users should be aware that ground variants can be less ductile than rolled types and benefit from appropriate coolant to extend tool life. Optimised for Metalworking and Hard Materials With a 135° point angle and classic Type N spiral, the tool penetrates tough materials more effectively and reduces walking on the surface. This geometry is tailored to workpieces such as alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain engineering plastics. The 3.6 mm diameter and corresponding flute length support applications where compact, precise holes are required on stationary or mobile drilling equipment. Who benefits and how to integrate it into the workflow This Twist Drill from MetavCUT is aimed at machinists, toolroom staff and maintenance professionals who need a reliable, precise metal drill for production and repair tasks. Use with steady clamping and recommended cooling to avoid premature wear. Compliance with DIN 338 ensures standardized dimensions and interchangeability for workshop setups that require consistent tool geometry. Choose MetavCUT's Twist Drill short Type N for demanding metal drilling tasks — for detailed technical advice or help selecting the right drill please contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel +49 2822 7131930 • WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 47036-FDA Type: Type N Diameter: 3.6 mm Point angle: 135° Overall length: 70 mm Spiral length: 39 mm Execution: short Shaft finish: fully ground Material: HSS-E Colour: 5% cobalt-alloyed For: Drilling Machine Application: Drills for metal Norm: DIN 338 Model series: Standard Line Bezeichnung (English): Twist Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill short Type N best used for? The MetavCUT Twist Drill short Type N is best used for precision drilling in metal, particularly alloyed and unalloyed steel, cast iron and non‑ferrous metals where a short, rigid drill reduces deflection and improves hole quality. Is coolant recommended when using the Twist Drill short from MetavCUT? Yes, using coolant is recommended with the MetavCUT Twist Drill short to lower cutting temperatures, extend tool life and achieve cleaner holes, especially when drilling harder materials at higher speeds. What are Twist Drills used for? They are primarily applied to the machining of high‑strength materials and larger bore diameters; the Twist Drill design is relatively easy to resharpen and withstands higher loads. Which 3 drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, significantly lowering friction and required feed forces while improving the drill’s centring in the workpiece. Can metal drills be used for wood drilling? Metal drills can be used in wood, but they typically provide poorer guidance and a less clean finish compared with wood drills; they are easier to resharpen and have less self‑feed tendency. For which drilling depths is the Twist Drill most used? A through-hole in solid material is commonly produced with a Twist Drill; this tool is most frequently used for diameters up to 20 mm and drilling depths up to 100 mm. What is better, HSS or HSSE? The common belief that HSSE is always superior to HSS is incorrect; selection should consider actual working conditions to determine whether the higher cost of HSSE is justified.
3.6mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Kompakter Karosseriebohrer mit HSS-G und 135° Spitzenwinkel für präzise Blech- und Stahlbohrungen; die doppelseitige Ausführung reduziert Ausfallzeiten, und die geschliffene Schaftgeometrie sorgt für exakten Rundlauf. Nutzen Sie die Kombination aus schneller Schneidleistung und robuster Bauweise für effiziente Werkstattprozesse. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder fragen Sie die Beratung bei Bedarf an. Karosseriebohrer von MetavCUT Der Karosseriebohrer ist ein doppelseitiger HSS-G Bohrer für präzise Metallbearbeitung in Werkstatt und Karosserie, geeignet für Handbohrmaschine und stationäre Einsätze. Karosseriebohrer »58036-FDA« von MetavCUT Geschliffenes HSS-G für saubere Metallbohrungen Doppelseitig: zwei Spitzen in einem Bohrer 3,6 mm Durchmesser, kurze Bauform für Blecharbeiten Für Handbohrmaschine und Werkstattmaschinen geeignet Schnelle, präzise Bohrungen in harten Werkstoffen Dank HSS-G (geschliffen) ergibt sich eine deutlich schärfere Schneidkante, die saubere Bohrbilder in legierten und unlegierten Stahl, Gussstahl sowie in Nichteisenmetallen ermöglicht. Der 135° Spitzenwinkel reduziert das Anbohren und verteilt die Schnittkräfte, sodass die Bohrung schneller entsteht und weniger Anpresskraft erforderlich ist. Diese Eigenschaft führt zu messbarer Effizienzsteigerung bei wiederkehrenden Bohraufgaben, ohne die Standzeit unnötig zu beeinträchtigen. Doppelseitige Konstruktion reduziert Werkzeugwechsel Die doppelseitige Ausführung funktioniert wie zwei Bohrer in einem: Wenn eine Spitze stumpf geworden ist, kann der Bohrer gewendet und die zweite Spitze verwendet werden. Diese Lösung ist besonders praktisch im Karosseriebau und bei Dünnblecharbeiten, weil sie Rüstzeiten reduziert und die Kosten pro Bohrung senkt. Durch die kurze, stabile Bauform eignet sich das Werkzeug besonders für Nietlöcher und präzise Blechverbindungen. Kompatibilität, Handhabung und Anwendungsbedingungen Die geschliffene Schaftgeometrie sorgt für Rundlaufgenauigkeit und sichere Kraftübertragung, sowohl bei Handgeführten Bohrmaschinen als auch bei stationären Säulenbohrern. Mit einer Spirallänge von 13 mm und einer Gesamtlänge von 55 mm eignet sich der Bohrer für flache bis mitteltiefe Bohrungen. Wegen der höheren Sprödigkeit von geschliffenen HSS-Werkzeugen empfiehlt sich der Einsatz von Kühlschmierstoff und moderater Drehzahl, um Bruchrisiken zu minimieren und die Standzeit zu optimieren. Für wen dieses Werkzeug entwickelt wurde Dieses Werkzeug richtet sich an Fachbetriebe im Karosseriebau, Fahrzeuginstandsetzung und allgemeine Werkstätten sowie an anspruchsvolle Heimwerker, die präzise Metallarbeiten ausführen. Durch die Kombination aus robustem Material und durchdachter Bauart profitieren Anwender von reduzierten Stillstandzeiten und konstanter Bohrqualität, besonders bei seriennahen Reparatur- und Montagearbeiten. Empfehlung: MetavCUT HSS-G Karosseriebohrer für präzise Blecharbeiten direkt bei Metav anfragen; technische Beratung und Bestellhilfe per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 verfügbar. Produktmerkmale Artikelnummer: 58036-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Standard Line Ausführung: doppelseitig Material: HSS-G Farbe: blank Daten Durchmesser: 3,6 mm Gesamtlänge: 55 mm Spirallänge: 13 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (G = geschliffen, für scharfe Kanten) Schaftmaterial/-ausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Ausführung: doppelseitig Einsatzgebiet: Karosserie und Dünnblech FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Karosseriebohrer aus HSS-G mit 135° Spitzenwinkel ist für viele legierte Stähle geeignet; bei hochlegierten oder besonders zähen Edelstählen empfiehlt sich eine spezielle Schneidstoffwahl oder reduzierte Schnittgeschwindigkeit. Welche Maschinen sind kompatibel mit diesem Bohrer? Der Karosseriebohrer wurde für Handbohrmaschine und stationäre Werkstattmaschinen konstruiert; bei Handgebrauch empfiehlt sich kontrollierte Drehzahl und Kühlschmierstoff zur Minimierung von Wärme- und Bruchschäden. Wie tief kann mit dem Bohrer sicher gebohrt werden? Mit einer Spirallänge von 13 mm und einer Gesamtlänge von 55 mm sind flache bis mitteltiefe Bohrungen vorgesehen; für starke Tiefen oder Vollmaterial sollte stufenweise vorgebohrt werden. Wie verhält sich die doppelseitige Ausführung in der Praxis? Die doppelseitige Bauform ermöglicht zwei Einsatzseiten pro Werkzeug, wodurch Rüstzeiten reduziert werden; der MetavCUT Karosseriebohrer ist dadurch wirtschaftlich bei wiederkehrenden Blecharbeiten. Gibt es Besonderheiten bei der Anwendung von HSS-G? Geschliffene HSS-G Bohrer liefern sehr scharfe Kanten und präzise Bohrbilder, können aber spröder sein; daher empfiehlt MetavCUT den Einsatz mit Kühlung und kontrollierter Vorschubrate, speziell bei empfindlichen Einsätzen.
3.6mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Die Kombination aus Extra Kurzer Bauform, HSS-G-Schneide und Zylinderschaft sorgt für stabile, schnelle und vielseitige Metallbohrungen; profitieren Sie von geringerer Bruchneigung und erhöhter Bohrgeschwindigkeit und bestellen Sie den Spiralbohrer direkt über Metav oder kontaktieren Sie unsere Beratung bei Fragen. Spiralbohrer 3,6 mm von MetavCUT (Typ N) Spiralbohrer 3,6 mm für präzise Metallbohrungen in dünnen Blechen und Profilen, extra kurz und robust für Hand- und Winkelbohrmaschinen. Extra kurze Bauform für mehr Stabilität HSS-G: schnelleres Bohren in Stahl und Guss Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft, passend für Dreibackenfutter DIN 1897 Standard, Typ N Standardspirale Mehr Stabilität bei beengten Platzverhältnissen und dünnen Werkstücken Die Extra Kurze Ausführung reduziert die Hebelwirkung und minimiert die Bruchneigung, was insbesondere beim Bohren in dünnen Blechen oder engen Bohrpositionen entscheidend ist. Durch die kürzere Spirallänge verbessert sich die Rundlaufgenauigkeit, sodass weniger Nacharbeit erforderlich wird. Anwender profitieren von einer bis zu 40 % schnelleren Bohrleistung und einem um 50 % reduzierten Anpressdruck gegenüber herkömmlichen HSS-Varianten, was die Bedienung mit Handbohrmaschinen deutlich erleichtert. Materialqualität und Schneidwinkel für harte Metalle Der Einsatz von HSS-G sorgt für hohe Verschleißfestigkeit und thermische Belastbarkeit beim Bohren in legierten und unlegierten Stählen, Guss und Hartkunststoffen. Der Spitzenwinkel 135° reduziert das Ausbrechen beim Anbohren harter Werkstoffe und verkürzt die Anbohrzeit, weil die Schneide flacher auftrifft. Als Typ N mit Normalspirale eignet sich der Bohrer besonders für metallische Werkstoffe, wobei die Schneidengeometrie ein ausgewogenes Vorschubverhalten und zuverlässige Spanabfuhr gewährleistet. Kompatibilität mit Werkstatt- und Handmaschinen für den Alltag Die Zylinderschaft macht den Bohrer universell einsetzbar in gängigen Dreibackenfuttern von Handbohrmaschinen und Winkelschleifern mit Bohrfutter. Für den Durchmesser im Standard-Bereich (2,0 mm–13,0 mm) ist dieses Werkzeug ideal geeignet für Werkstattarbeiten, Montage und DIY‑Projekte; bei höherer Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer. Die extra kurze Ausführung ist speziell dann von Vorteil, wenn wenig Platz für Ausklinkungen oder Innenbearbeitung vorhanden ist. Praktische Anwendungstipps für saubere Bohrresultate Vor dem Bohren sollte die Bohrstelle entgratet und, falls möglich, mit Schneidöl leicht geschmiert werden, um Standzeit und Oberflächenqualität zu verbessern. Für saubere Passungen gilt: Anbohren über ein Zentrierloch erhöht die Präzision; bei tiefen Löchern ist Mehrstufiges Aufbohren ratsam, um die Querschneide zu entlasten. Beachten Sie die maximale effektive Bohrtiefe im Verhältnis zum Durchmesser; bei diesem Durchmesser reichen gewöhnlich direkte Bohrungen aus, solange die Maschine stabil gespannt ist. Nutzen Sie die hohe Stabilität und Schnittgeschwindigkeit des MetavCUT Spiralbohrers (SKU 56036-FDA) für exaktere Metallbohrungen und bestellen Sie direkt bei Metav – bei technischen Fragen: info@metav-werkzeuge.com Produktmerkmale Artikelnummer: 56036-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Typ: Typ N Norm: DIN 1897 Material: HSS-G Farbe: blank Schaftausführung: Zylinder Gesamtlänge: 52 mm Spirallänge: 20 mm Spitzenwinkel: 135° Ausführung: extra kurz Anwendung: Bohrer für Metall Verpackungseinheit: 10 Daten Durchmesser: 3,6 mm Gesamtlänge: 52 mm Spirallänge: 20 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten HSS-G: Hochleistungs-Schnellstahl, verschleißfest DIN 1897: Standard für Spiralbohrer, Maß- und Formtreue Zylinder: Rundschaft, passend für Dreibackenfutter Typ N: Normalspirale, geeignet für Metall und Stahl Extra kurz: Kürzere Gesamtlänge und Arbeitslänge für höhere Stabilität Anwendung: geeignet für Handbohrmaschine und Winkelbohrmaschinen FAQ Wie geeignet ist der Bohrer für Edelstahl und gehärtete Stähle? Der MetavCUT Spiralbohrer (Typ N, SKU 56036-FDA) mit Spitzenwinkel 135° ist für härtere Werkstoffe deutlich besser geeignet als spitzere Bohrer; bei sehr gehärteten Stählen empfiehlt sich jedoch spezialisierter Bohrerwerkstoff. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die Zylinderschaft macht den Spiralbohrer kompatibel mit gängigen Dreibackenfuttern von Handbohrmaschinen; bei hohem Drehmoment ist auf sicheren Sitz im Bohrfutter zu achten. Für welche Werkstoffe ist dieser Bohrer am besten geeignet? Der HSS-G Spiralbohrer ist optimiert für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Wie verhindert man Bruch bei der Nutzung des extra kurzen Bohrers? Kurze Bohrerlängen reduzieren die Bruchgefahr; zusätzlich helfen korrekt gewählter Vorschub, moderate Drehzahlen und Einsatz von Schneidöl, die Standzeit zu erhöhen. Worin besteht der Vorteil der extra kurzen Ausführung gegenüber Standardlängen? Die Extra Kurze Bauform erhöht die Verdrehungsfestigkeit, verringert das Risiko des Verkippens und ermöglicht präzise Bohrungen in engen Bauteilen.
3.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill (Spiralbohrer) — Type N, 3.6 mm, 135°, Short, Bright Finished, HSS‑G, DIN 338 The MetavCUT Twist Drill (Spiralbohrer) is a short, fully ground Type N drill bit designed for precision metalworking and stationary or portable drilling machines. Short, short design for higher stability Fully ground HSS‑G for clean, precise holes 135° tip optimized for hard materials Conforms to DIN 338 for short twist drills Bright finished shank for secure clamping Durable HSS‑G construction for metalworking efficiency The HSS‑G composition of this short twist drill combines high hardness with a ground geometry that produces clean, accurate holes in a range of metals. Because the flutes and cutting edges are produced by CNC grinding rather than rolling, the result is a sharp cutting edge and excellent runout accuracy, which reduces the need for rework. For operations in alloyed and unalloyed steel, cast steels and non‑ferrous metals, this material and finish deliver reliable performance and predictable tool life. Short length for greater rigidity and precision A reduced overall length and short flute length lower the unsupported overhang, increasing rigidity and reducing vibration during drilling. This design characteristic leads to improved hole quality and less tool deflection when machining harder materials. In practice, shorter drill geometry is particularly advantageous when using the drill in demanding machining tasks or in setups where concentricity and surface finish are critical. 135° tip and Type N spiral for hard materials The 135° tip angle of this twist drill reduces the initial tendency to wander and distributes cutting forces over a larger area, which is beneficial when penetrating tougher materials such as stainless steel. As a Type N (normal spiral) geometry, the flute pitch and helix are optimised for metalworking, offering a balance between chip evacuation and cutting stability. For users unfamiliar with tip geometry: a larger tip angle shortens the entry time and improves centring on hard workpieces. Fully ground shaft and bright finish for secure clamping The fully ground shank ensures consistent diameter and concentricity, making the tool easier to clamp securely in standard chucks and toolholders. The bright finished surface facilitates smooth insertion and removal while minimising corrosion during storage. Together these features enhance setup reliability and reduce downtime caused by tool slippage or misalignment. Applications and recommended use This short twist drill is intended primarily for metal drilling on both stationary and portable drilling machines. Typical applications include holes in alloyed and unalloyed steels, cast materials, sintered and tempered irons, non‑ferrous metals and hard plastics. Due to its ground geometry and material properties, the drill is best used with adequate coolant and in setups where rigidity can be maintained to avoid premature breakage. For technical advice or to verify if this MetavCUT Twist Drill matches specific machining conditions, METAV Werkzeuge offers expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 45036-FDA Type: Type N Diameter: 3.6 mm Tip angle: 135° Execution: Short Flute length: 39 mm Overall length: 70 mm Shank execution: Fully ground Material: HSS‑G Finish/Colour: Bright finished For drill machine: Drilling Machine (Hand Drill) Application: Drills for metal Standard/Norm: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the MetavCUT Twist Drill (Spiralbohrer) and where is it best applied? The MetavCUT Twist Drill (Spiralbohrer), a Type N short HSS‑G drill, is mainly applied for machining high‑strength materials and larger diameters in metalworking; its ground geometry makes it especially suitable for precise holes in alloyed and unalloyed steel, cast steel and other hard materials. Which three drill types exist and how does the MetavCUT Twist Drill relate to them? There are three main drill categories: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking rather than wood or stone applications.
3.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Spiralbohrer) — Short HSS-G Type N, 3.75 mm, 135°, Bright Finished, Fully Ground, DIN 338 — MetavCUT A Twist Drill (Spiralbohrer) Type N designed for Drilling Machine use, offering a short, rigid HSS-G construction for precise metalworking in hard materials. Short design for improved rigidity and accuracy HSS-G ground geometry for clean, precise holes 135° point angle suited to hard metals and stainless steel Fully ground shank for excellent runout accuracy Conforms to DIN 338 for short twist drills Maximum Precision from Ground HSS for Demanding Metalworking The short HSS-G construction provides a significant increase in Stability compared with longer drills, reducing deflection and enabling more accurate hole placement. This ground variant produces very sharp cutting edges and high Roundness of the bore, which is particularly advantageous when machining alloys and tempered steels. The Type N spiral is the classic metalworking geometry, optimised for consistent chip removal and reliable centring in stationary drilling setups. Faster, Lower-Force Drilling with Reduced Wear Engineered to cut with less effort, the ground HSS geometry can deliver up to 40% faster drilling and requires markedly lower feed forces versus conventional HSS products. The 135° Point Angle decreases initial breakthrough stress on the workpiece and is therefore recommended for harder materials such as stainless steel and cast components. This combination reduces tool wear and supports longer life when used with appropriate cooling and feed rates. Ideal Applications and Target Users Designed for professional workshops and industrial users, this short Twist Drill excels in precision metal fabrication, maintenance and toolroom tasks. Suitable materials include alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals and hard plastics. The short overhang makes the tool particularly well suited to tasks requiring dimensional accuracy and minimal runout on drilling machines and dedicated fixtures. Handling, Regrinding and Machine Compatibility A ground HSS drill should be used primarily in stationary or rigidly supported drilling machines with appropriate coolant to avoid brittle failure. The fully ground shank ensures consistent chucking stability; regrinding is straightforward for experienced users, preserving cutting geometry. Conformity to DIN 338 ensures predictable dimensions and compatibility with standard toolholders and collets. For precision metalworking choose the MetavCUT Twist Drill — contact METAV Werkzeuge for tailored technical advice and support at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Detailed Specifications for Machine Compatibility Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 450375-FDA Type: Type N Diameter: 3.75 mm Overall Length: 70 mm Spiral Length: 39 mm Point Angle: 135° Execution: short Shank Finish: fully ground Material: HSS-G Standard: DIN 338 Colour: bright finished For Machine: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill (Spiralbohrer) Type N? The MetavCUT Twist Drill (Spiralbohrer) Type N is primarily used for machining high-strength materials and larger drill diameters; its short, ground design makes it ideal for precise work in alloyed and unalloyed steels, cast components and hard plastics, delivering clean holes and high runout accuracy. How should the MetavCUT Twist Drill be maintained for longest life? Regular use with suitable coolant and correct feed rates preserves the sharp HSS-G geometry of the MetavCUT Twist Drill; regrinding should be performed by trained personnel to maintain the original point angle and flute geometry for consistent drilling performance. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high-strength materials and for larger drill diameters; its geometry is easy to regrind and it withstands significant loads while providing reliable cutting behaviour. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills.
3.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 3.7 mm, 118°, black, DIN 338 The Twist Drill Type N is a short HSS metalworking drill designed for precision drilling in steel and non-ferrous metals using a compatible Drilling Machine. Short HSS design for stable drilling Conforms to DIN 338 for short twist drills 118° tip for improved centring on curved surfaces Type N normal spiral optimized for metalworking Flute length 39 mm and overall length 70 mm for rigidity Exceptional material performance for demanding metalwork This short HSS Twist Drill with a diameter of 3.7 mm delivers high wear resistance and toughness for standard metal drilling tasks. Made from High Speed Steel, the bit is manufactured to provide elasticity that reduces breakage risk when drilling holes below 6 mm. The HSS composition supports reliable cutting in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics while allowing easier resharpening compared with coated alternatives. The compact geometry reduces vibration and ensures consistent hole quality. Built for stability and machine compatibility Conforming to DIN 338, this short Twist Drill is specified for use with a cylindrical shank on rotating stationary or portable machines. The Type N normal spiral is the classic geometry for metal and steel applications and therefore well suited to a wide range of Drilling Machines. The 118° point angle eases initial penetration and improves centring on slightly curved or work-hardened surfaces; for harder materials, a different point geometry may be preferred. The combination of Flute Length 39 mm and Overall Length 70 mm minimises overhang and reduces the risk of deflection during operation. Who benefits and where to use it Workshops, maintenance technicians and professionals who require reliable standard metal drills will find this short Twist Drill particularly useful for precision tasks. Its compact length makes it ideal for confined setups and for maintaining concentricity in deep or blind-hole drilling up to moderate depths. For users uncertain about compatibility with specific machines or materials, METAV Werkzeuge offers expert guidance to match the drill to the task and tooling. Practical advantages: handling, resharpening and life cycle The short design increases stiffness and improves hole accuracy while simplifying handling in jigs and fixtures. The Type N spiral is straightforward to regrind, extending service life and lowering total tooling cost for frequent users. Because the point geometry reduces the cross-cut area at the tip, cutting forces and friction are decreased, which in turn reduces required feed forces and improves centring during start-up. For routine maintenance and professional use, this drill strikes a balance between performance and long-term economy. We recommend the MetavCUT Twist Drill Type N for reliable, precise metalworking; for personalised advice or additional technical data contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 40037-FDA Diameter: 3.7 mm Tip angle: 118° Execution: short Material: HSS (High Speed Steel) Standard: DIN 338 Type: Type N For Drilling Machine: Drilling Machine Flute Length: 39 mm Overall Length: 70 mm Colour: black Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is especially applied when machining alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The short HSS design makes it robust for standard metalworking tasks and reduces breakage risk on smaller diameters. Which three drill types exist and how does the Twist Drill fit in? Common drill categories are metal drills, wood drills, and masonry/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal-drill group, offering the classic normal spiral geometry optimised for steel and similar materials.
3.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, Diameter 3.7 mm, 135° Point Angle, Short Execution, 5% Cobalt-Alloyed, HSS‑E, DIN 338, Fully Ground Shaft (Standard Line) by MetavCUT The Twist Drill is a short Type N metal drill designed for precise drilling in hard materials with a 135° point angle and a 3.7 mm diameter, ideal for use in a Drilling Machine. Short design for greater stability and precision HSS‑E with 5% cobalt for higher heat resistance Fully ground shaft for excellent runout accuracy Conforms to DIN 338 for short twist drills Optimised for metal drilling and hard materials Precision and stability for demanding metalwork The short Twist Drill design reduces overhang and vibration, which directly improves drilling accuracy and tool life. Because the protruding length is smaller, the drill resists bending and chatter, making it especially suitable for precise holes in steel and other hard materials. This short execution is therefore recommended when high concentricity and repeatable results are required in metalworking tasks. Material technology that extends performance Manufactured from HSS‑E and alloyed with 5% cobalt, the drill offers increased hot hardness and wear resistance compared with conventional high-speed steels. The 135° point angle is selected to ease penetration into tough materials and to lower the tendency for the tip to wander. For users unfamiliar with these terms: HSS‑E is a high-speed steel with cobalt additive that maintains hardness at elevated temperatures, while a larger point angle reduces cutting stress on stainless and alloy steels. Ground geometry for cleaner holes and reliable guidance This MetavCUT twist drill is fully ground, meaning the flute geometry and cutting edges are produced by CNC grinding rather than roll forming. The result is sharper cutting lips, improved roundness of holes and a better surface finish in the workpiece. For workshop operators this translates into fewer rework steps and less time spent deburring. The Type N spiral (normal helix) provides a balanced chip evacuation for many metal applications. Conformity and recommended uses Being manufactured to DIN 338 as a short twist drill, this tool is optimised for drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The short length and robust material composition make it well suited for stationary and portable Drilling Machines when coolant is applied for deep cuts or harder alloys. For diameters under 6 mm the rolled HSS variant can reduce breakage risk in some settings, but the ground HSS‑E offers superior hole quality for precision work. Strong recommendation: Choose the MetavCUT Twist Drill for precise metal drilling tasks where stability and hole quality matter most — METAV Werkzeuge offers expert advice and technical support to ensure the right tool choice for your application. For assistance contact METAV Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930 / WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47037-FDA Diameter: 3.7 mm Point Angle: 135° Type: Type N Material: HSS‑E Execution: Short Colour/Alloy: 5% cobalt-alloyed Shaft Execution: Fully ground Spiral Length: 39 mm Overall Length: 70 mm Intended For: Drilling Machine Application: Drills for metal Model Series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT best used for? The MetavCUT Twist Drill is primarily used for metalworking: it is designed to drill high-strength materials and larger diameters where stability and precise guidance are required; its short design and material composition allow it to withstand higher stresses during drilling. Can the MetavCUT Twist Drill be used in a handheld drill? The Twist Drill is optimised for Drilling Machines and stationary setups for best results, but it can be used in handheld machines for lighter tasks; however, stable clamping and appropriate feed control are recommended to avoid breakage and to maintain hole quality. What are Twist Drills used for? Twist Drills are mainly applied when machining high-strength materials and larger drill diameters. Their shape allows relatively easy regrinding and they withstand higher loads, making them suitable for demanding metal drilling operations. Which three drill types exist? The three common drill types are: Metal Drill, Wood Drill, and Stone/Concrete Drill. Why are Twist Drills sharpened (pointed)? Pointing reduces the cross-cut at the tip of the Twist Drill, which significantly lowers friction and thus the feed forces required; at the same time the pointed tip centres the drill more accurately in the workpiece. Can you use a metal drill in wood? A metal drill can be used in wood, but guidance may be inferior and the hole finish less clean; metal drills are easier to re-sharpen and have less self-feed, so they behave differently compared with wood-specific bits. For which hole depths is the Twist Drill most commonly used? Twist Drills are the standard tool for through-holes; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm, making them the go-to choice for many machining tasks.
3.7mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — double-sided HSS-G, 3.7 mm, 135° The Body Drill (Karosseriebohrer) is a double-sided Twist Drill for hand Drilling Machines, designed for precise metalworking and sheet-metal applications with a 3.7 mm diameter and a 135° tip angle. Double-ended design for extended usability HSS-G ground geometry for clean metal holes Reduced feed force and faster drilling performance Bright finished surface for smooth chip evacuation High-efficiency cutting for hard materials The HSS-G ground construction of this Body Drill combines sharp cutting edges with high concentricity, enabling clean, precise holes in a variety of Metals. With a 135° tip angle the drill reduces walking and improves entry in harder materials such as stainless steel and alloyed steel. The fully ground flute geometry produces consistent chips and surface finish, which benefits users who require repeatable, high-quality results. Practical advantage of a double-sided design Thanks to the double-sided execution the tool works like two drills in one: when one tip becomes dull it can be reversed and the other end used, extending the service life in daily workshop use. This shorter, robust format is particularly suited for bodywork and thin-sheet drilling where stability and the option to flip the drill increase uptime. Operators will notice lower downtime and fewer tool changes during repetitive tasks. Optimised handling and recommended operating practice The fully ground shank and flute geometry deliver high roundness and dimensional accuracy, improving guidance in hand Drilling Machines. For best results when drilling tough or heat-sensitive materials, apply appropriate cooling and moderate cutting speeds to avoid embrittlement. Because ground HSS can be harder and more brittle than rolled versions, stationary use with coolant is recommended for sustained durability. Suited users and typical applications This Body Drill is targeted at Automotive Body Shops, Maintenance Technicians and metalworking professionals who need reliable, precise holes in thin to medium-thickness metals. Typical applications include sheet-metal assembly, rivet and fixture preparation and general metal fabrication. The tool is especially effective where clean hole quality and quick tool replacement by flipping the drill are priorities. For professional workshop results choose the MetavCUT Body Drill with HSS‑G ground geometry — and contact METAV Werkzeuge for expert advice and tailored technical support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Information Designation: Karosseriebohrer / Body Drill Brand: MetavCUT SKU: 58037-FDA Diameter: 3.7 mm Tip angle: 135° Execution: double-sided Colour: bright finished Material: HSS-G Shaft execution: fully ground Total length: 55 mm For drilling machine type: Drilling Machine (Handbohrmaschine) Model series: Standard Line Application: Drills for metal / Bohrer für Metall Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what are Twist Drills used? The Body Drill (Karosseriebohrer) from MetavCUT is a type of Twist Drill primarily applied to machining high-strength materials and larger drill diameters; its form allows for straightforward regrinding and it withstands higher loads, making it suitable for demanding metalworking tasks. Which 3 drill types exist? When choosing tools, consider the main categories: Metal drills (such as the MetavCUT Body Drill), Wood drills and Masonry/Concrete drills, each optimised for the specific material and drilling method.
3.7mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N · 3.7 mm · 135° Tip · Extra Short · Bright Finished · HSS‑G · DIN 1897 The Twist Drill is an extra‑short Type N drill for Drilling Machines, designed for stable, precise metalworking in confined spaces. Extra‑short design for superior stability 135° tip for harder materials and faster entry HSS‑G material for high wear resistance Cylindrical shank for universal chuck compatibility DIN 1897 standard ensures industrial reliability Faster, more stable drilling in limited spaces The Extra‑Short design reduces flex and the risk of breakage, producing more stable cutting when working in tight or thin components. Because the overall length and flute length are shortened, the cutting forces focus more directly at the tip; this means improved concentricity and less vibration during use. For metalworking tasks where access is limited, the compact geometry offers a practical advantage while maintaining tool life and reliability. Optimised geometry for harder materials Equipped with a 135° tip, this Type N drill is optimised for drilling harder metals such as stainless steel. A larger tip angle reduces the initial bite and shortens lead‑in time, lowering the required thrust and improving centring. For customers unfamiliar with tip geometry: the tip angle influences how aggressively the drill cuts and how well it self‑centres; 135° is commonly chosen for tougher, less ductile materials. High‑speed steel G grade for durable performance Manufactured from HSS‑G, the Twist Drill combines toughness with thermal resistance suitable for continuous metal drilling. Compared with standard HSS, the ground geometry enables up to 40% faster drilling with around 50% less feed force in many cases. This characteristic is particularly beneficial when working on alloys, cast steels, and non‑ferrous metals where consistent cutting performance and regrindability matter. Practical compatibility and application scope The cylindrical shank makes the tool universally compatible with standard three‑jaw chucks on Hand and Angle Drilling Machines. While the round shank is ideal for general clamping, operators should note that very high torque applications may require alternative shank types to avoid slippage. Intended primarily as a metalworking tool, the drill excels in thin materials such as sheets, profiles and plate where a short, stiff geometry is advantageous. Target users and workshop recommendation Designed for professionals and advanced hobbyists tackling precision metal fabrication, the drill suits those needing a compact, resilient cutting tool for confined assemblies and maintenance tasks. The Standard Line model offers dependable repeatability for production or repair work, and its classic Type N flute form provides familiar handling and easy regrinding for workshops that maintain their own tooling. Strong recommendation: Choose the MetavCUT Extra‑Short Twist Drill for demanding metal drilling tasks — for personalised advice or detailed technical data contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 56037-FDA Diameter: 3.7 mm Tip Angle: 135° Type: Type N Finish: Bright finished Execution: Extra Short Material: HSS‑G Standard: DIN 1897 Suitable for: Drilling Machine (Hand drilling machines and angle drills) Spiral Length: 20 mm Overall Length: 52 mm Shank: Cylindrical Model Series: Standard Line Application: Drills for metal Colour: Bright finished Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger diameters in metalworking. Its extra‑short form is especially useful for drilling thin sheets and profiles, and the HSS‑G grade and ground geometry make it suitable for alloyed and unalloyed steel, cast steel, cast iron and non‑ferrous metals. Which three drill types exist? The main categories of drill bits are metal drills, wood drills and masonry/concrete drills, each optimised for the respective material properties and cutting requirements.
3.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G, 3.7 mm, 135° Tip, Bright Finished by MetavCUT A Twist Drill (Type N) for precision metal drilling, engineered as a short, bright finished HSS‑G tool for use in handheld Drilling Machines and stationary equipment. Short design for improved stability Ground HSS‑G for sharp edges and clean holes 135° tip for harder materials and reduced burrs Fully ground shank for precise concentricity Maximum precision and proven material technology for metalworking The short design combines a HSS‑G ground geometry with the stability benefits of reduced overhang, delivering more consistent concentricity and less deflection. Conforming to DIN 338, this construction provides sharp cutting edges and high runout accuracy; the ground flutes produce clean, burr‑reduced holes in demanding alloys. One direct advantage is faster drilling progress in hard materials compared with conventional rolled drills, making the tool suitable where repeatable precision is required. Best suited applications and machine compatibility Designed primarily as a metalworking tool, the short Type N geometry excels in drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The 135° tip reduces initial cutting forces and improves centring in tougher workpieces, while the compact overall length and 39 mm spiral length lower vibration when used in handheld Drilling Machines or on stationary machines. This configuration supports precise hole placement and reduces the risk of wander on hard surfaces. Handling advice and operating recommendations for longer tool life A fully ground shank and precise flute geometry allow secure clamping and accurate runout; use of appropriate coolant and moderate cutting speeds extends tool life and mitigates brittleness inherent to ground HSS variants. The 70 mm overall length and short overhang favour operations with limited reach and high rigidity; where deep holes or interrupted cuts are required, ensure suitable pecking cycles and stable fixturing. If regrinding is needed, the ground form enables straightforward sharpening while maintaining the original cutting geometry. Choose the MetavCUT short HSS‑G Twist Drill for precise, stable metal drilling — for technical questions or personalised advice METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 45037-FDA Type: Type N Diameter: 3.7 mm Tip angle: 135° Material: HSS‑G Execution: short Colour / Finish: bright finished Shank finish: fully ground Spiral length: 39 mm Overall length: 70 mm Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill (Type N) from MetavCUT? The MetavCUT Twist Drill (Type N) is mainly used for machining high‑strength materials and larger drill diameters; its ground geometry and short design make it particularly suitable for precise work in metals where clean holes and high accuracy are required. Which three drill types exist and where does the MetavCUT Twist Drill fit? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill is a metal drill optimised for steel and similar materials. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cutting edge at the point, which lowers friction and required feed forces; this improves centring and reduces the operator's effort when using the MetavCUT Twist Drill. Can metal drills be used in wood with the MetavCUT Twist Drill? Metal drills like the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically inferior compared with wood‑specific bits; however, metal drills are easier to re‑sharpen and show less aggressive self‑feed.
3.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 3.8 mm, 118°, Short, Black, DIN 338, HSS (MetavCUT) A Twist Drill in short HSS design for precision metal drilling with Drilling Machines and hand drills. Short HSS Twist Drill Type N 3.8 mm 118° tip for reliable centring Flute length 43 mm for deep metal holes DIN 338 standard for short drills Suitable for Drilling Machines and hand drills Robust HSS construction for reliable metalworking The short HSS construction of this drill bit provides a resilient combination of hardness and elasticity that reduces breakage risk under typical workshop loads. With a 3.8 mm diameter and a short overall design, the bit delivers improved rigidity compared with longer variants, resulting in more consistent hole geometry and less runout during operation. This makes the tool particularly suited for demanding metalworking tasks where stability matters. Precise geometry for clean starts and accurate holes Thanks to the 118° tip angle and Type N geometry, the drill achieves dependable centring and a controlled cutting action in a wide range of metallic materials. The 43 mm flute length supports effective chip evacuation during through-drilling, lowering heat build-up and preserving cutting performance. These features translate into cleaner hole edges and less rework for fabricators and maintenance technicians. Designed for professional and hobby use in metal shops Targeted at workshops, maintenance teams and hobbyists working with metal, this short Twist Drill excels in applications that require tight tolerances and repeatable results. The Type N normal spiral is optimised for steels and common ferrous materials, while the roll-rolled HSS manufacturing process aids durability when drilling small diameters such as 3.8 mm. For users seeking a dependable general-purpose metal drill bit, this item balances service life and ease of re-sharpening. Standard compliance and handling advantages Manufactured to DIN 338, the drill conforms to expectations for short straight-shank twist drills, ensuring compatibility with standard chucks and fixtures. The reduced overhang of the short version increases positional accuracy and lowers the chance of bit deflection, which is especially beneficial when drilling in jigged or clamped setups. Regular sharpening and correct cutting speeds will maintain performance and extend the working life of the tool. MetavCUT recommends this short HSS Type N Twist Drill for precise metalworking tasks — for further technical advice or application-specific guidance contact METAV Werkzeuge. Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40038-FDA Diameter: 3.8 mm Tip angle: 118° Flute length: 43 mm Overall length: 75 mm Type: Type N Material: HSS Standard: DIN 338 Finish / Version: short Colour: black Application: Drills for metal For drilling machine: Drilling Machine Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The Twist Drill from MetavCUT (Type N) is primarily used for the machining of high-strength materials and larger hole diameters in metal. Its short HSS design is easier to re-sharpen, withstands greater loads and therefore reduces the risk of breakage, making it suitable for extensive metalworking tasks. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for metals and similar materials.
3.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, 3.8 mm, 135° point, 5% cobalt-alloyed, HSS‑E, fully ground shank, DIN 338 by MetavCUT The Twist Drill Type N short is a precision metalworking drill bit designed for stable, high‑accuracy drilling in hard materials using a Drilling Machine. Short design for improved stability 3.8 mm diameter for precise holes 135° point angle for hard materials 5% cobalt‑alloyed HSS‑E for heat resistance Fully ground shank for high concentricity Engineered for stable, accurate metal drilling The short configuration of this Twist Drill delivers a reduced overhang that significantly improves stability and reduces deflection during machining. With a 3.8 mm diameter and a 75 mm overall length including a 43 mm spiral length, the geometry supports precise hole positioning and consistent concentricity. The Type N spiral profile is optimised for metalworking applications, allowing controlled chip evacuation and steady feed rates when used in a suitable Drilling Machine. Material and wear resistance for demanding tasks Manufactured from HSS‑E with a 5% cobalt alloy, this short drill bit offers enhanced hot‑hardness and improved wear resistance compared with plain HSS grades. The 135° point angle reduces thrust during entry into hard materials and is particularly effective on stainless steel and other tough alloys. The fully ground flute geometry ensures sharp cutting edges for clean hole walls, while the cobalt content supports longer tool life under elevated temperatures. Precise manufacturing and conformity to DIN 338 Produced to the DIN 338 specification, the Short Twist Drill features consistent dimensions and dependable interchangeability for industrial use. The fully ground shank and flute finish result in excellent roundness and high runout accuracy, which translates into fewer rejects and faster setup for series production. For tasks requiring repeatability and tight tolerances, this design reduces the need for secondary rework. Practical applications and user guidance This drill is intended primarily for Drills for metal operations including alloyed and unalloyed steels, cast iron, non‑ferrous metals and select plastics. Typical uses include maintenance, fabrication and precision engineering where short, stiff drilling tools are preferred. For best results, use appropriate cutting fluid and moderate spindle speeds to exploit the cobalt alloy’s thermal advantages and to minimise risk of premature wear or breakage. Compatibility and handling recommendations The fully ground cylindrical shank fits standard chucks of portable and stationary drilling equipment and is especially suited to station‑based Drilling Machines. Because ground HSS drills can be more brittle than rolled variants, avoid excessive vibration and ensure secure clamping; cooling or lubrication is recommended for deeper or continuous drilling cycles. The short length makes bit changes quick and reduces operator fatigue in repetitive tasks. Strongly recommended: choose MetavCUT quality for stable, precision metal drilling and contact METAV Werkzeuge for personalised advice — email info@metav-werkzeuge.com, phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47038-FDA Diameter: 3.8 mm Overall length: 75 mm Spiral length: 43 mm Point angle: 135° Type: Type N Execution: short Material: HSS-E Alloy: 5% cobalt-alloyed Shank: fully ground Intended machine: Drilling Machine Application: Drills for metal Standard: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill MetavCUT Type N short? The MetavCUT Twist Drill Type N short is used predominantly for metalworking tasks; it is designed to drill through high‑strength materials and larger diameters where a short, rigid tool provides better precision and reduced bending. Which three drill types are commonly distinguished and where does the Twist Drill fit? Generally, drill types are classified as metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N short belongs to the metal drill category and is optimised for machining metals rather than wood or masonry. Why are twist drills sometimes point‑sharpened? Point sharpening reduces the cross‑cut at the tip, lowering friction and thus reducing the required feed forces; a sharper, correctly angled tip also helps centre the drill more reliably in the workpiece. Can a metal twist drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish may be inferior to a dedicated wood bit; nevertheless, metal drills are easier to regrind and generally exhibit less self‑feed in softer materials.
3.8mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — Double-Sided HSS‑G Twist Drill, 3.8 mm, 135° Tip, Bright Finished Body Drill (Karosseriebohrer) is a precision Twist Drill designed for demanding metalworking tasks with a double-sided configuration and a fully ground shank suitable for use in a Drilling Machine. MetavCUT Body Drill, 3.8 mm diameter Double-sided design for two usable tips HSS‑G fully ground for precise metal holes 135° tip angle for harder materials Bright finished shank, total length 55 mm Faster, cleaner holes in hard metals for reliable results The HSS‑G composition and fully ground geometry deliver sharp cutting edges and high runout accuracy, so each hole is consistently clean. The 135° tip angle reduces burr formation and improves entry on tougher alloys like stainless steel, while the bright finish supports smooth chip evacuation. Users benefit from reduced rework and more predictable hole tolerances when working with sheet metal, cast parts or non-ferrous components. Double-sided design reduces downtime and improves workshop efficiency Because the drill is double-sided, each end has a usable tip, effectively offering two cutting edges in one tool; when one tip dulls it can be reversed, extending tool life and minimizing tool changes. The short, stable geometry makes this drill particularly practical for bodywork and thin-plate drilling where precision and repeatability matter. For workshops aiming to keep cycle times low, the combination of Twist Drill design and robust HSS‑G material supports faster drilling with less feed force. Practical use cases and target users who profit most This Twist Drill is tailored for professionals and advanced hobbyists working on automotive body panels, sheet metal fabrication and machine maintenance. The product excels when creating clean holes for rivets or fasteners in thin to medium-thickness metal sheets. For technicians requiring a compact yet accurate drill for repetitive tasks, this tool balances durability and serviceability, while still being suitable for general metal drilling tasks on various alloys. Care, application tips and simple explanations for non-experts To achieve optimal results, use appropriate cutting speed, steady coolant flow and a stable drilling setup; the HSS‑G material can be more brittle than rolled alternatives and benefits from cooling. The term fully ground means the flutes and geometry are CNC-ground rather than rolled, producing a sharper cutting edge and better concentricity. For hand or machine use in a Drilling Machine, clamp the workpiece and ensure correct feed to avoid chipping. Re-sharpening is possible but should be done by experienced grinding to maintain the 135° geometry. Recommendation: Choose the MetavCUT Body Drill for precise, efficient metal drilling — for technical questions or personalised advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271. Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58038-FDA Diameter: 3.8 mm Material: HSS‑G Execution: Double-sided Finish: Bright finished Shank: Fully ground Tip angle: 135° Spiral length: 13 mm Total length: 55 mm Suitable for: Drilling Machine / Hand Drills for metal Model series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Body Drill (Karosseriebohrer) best suited for? The MetavCUT Body Drill, a purpose-built Twist Drill, is particularly suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non-ferrous metals and hard plastics; its HSS‑G composition and 135° tip make it effective for harder workpieces and precise metal holes. For what is a Twist Drill used? A Twist Drill is mainly used for machining high-strength materials and larger drill diameters; its form permits easy regrinding and it withstands higher loads. It is widely applied where robust, clean holes are needed in metalworking and bodywork. Which three drill types exist? Common categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Body Drill belongs to the Metal Drill group and is optimised for that range of applications.
3.8mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 3.8 mm, 135° tip, Extra Short, Bright Finished, HSS‑G, DIN 1897 The Twist Drill (Type N) is an extra short, bright finished HSS‑G metal drill designed for precise work in tight spaces and for use with hand and drilling machines. Extra Short design for improved stability 135° tip angle for harder materials HSS‑G material for high wear resistance Cylindrical shank for standard three‑jaw chucks Conforms to DIN 1897 for robust performance Faster, more controlled metal drilling with HSS‑G performance The Twist Drill from MetavCUT combines HSS‑G construction with a ground flute geometry to enable up to 40% faster drilling while requiring significantly less feed force. This results in less operator fatigue and more consistent holes when working with alloyed and unalloyed steels, cast steels, non‑ferrous metals and hard plastics. For users looking to boost shop productivity, the reduced cutting forces translate directly into smoother operation and fewer rework cycles. Extra short length increases stability and reduces breakage risk Designed to the DIN 1897 extra short specification, this drill’s reduced overall length improves torsional rigidity and lowers the chance of breakage during demanding operations. In confined setups or where minimal overhang is essential—such as thin sheet metal, profiles and tight fixture arrangements—the Extra Short execution gives a decisive handling advantage and steadier guidance through the workpiece. Compatible shank and practical use in hand drills Equipped with a cylindrical shaft, the bit fits common three‑jaw chucks on hand drills and drilling machines, ensuring universal clamping and straightforward replacement. When used in hand drilling, the Type N normal spiral geometry supports reliable chip evacuation in metalworking tasks; apply moderate, steady feed to benefit from the improved centring and reduced tendency to wander. Who benefits and where this drill excels Workshop technicians, maintenance teams and metal fabricators seeking a reliable standard‑spiral metal drill will appreciate the Standard Line quality of this tool. Its 135° tip angle shortens the initial penetration time for harder materials and assists in maintaining concentricity. For less experienced users, the robust design makes it easier to achieve clean results while still allowing sharpening and resharpening when needed. Strong recommendation: Choose MetavCUT’s Extra Short Twist Drill (Type N) for demanding metal applications — METAV Werkzeuge offers expert guidance if unsure which drill best fits your project; contact info@metav-werkzeuge.com or call +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 56038-FDA Diameter: 3.8 mm Overall length: 52 mm Spiral length: 20 mm Tip angle: 135° Type: Type N Execution: Extra Short Finish / Colour: Bright finished Shank: Cylindrical Material: HSS‑G Standard: DIN 1897 Application: Drills for metal For use in: Drilling Machine / Hand Drill Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Twist Drill (Type N) from MetavCUT handle? The MetavCUT Twist Drill Type N is designed primarily for metalworking: it drills alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics, offering reliable performance across typical workshop materials. Is the MetavCUT Twist Drill suitable for hand drills and machines? Yes, the Twist Drill with a cylindrical shank fits standard three‑jaw chucks and is suitable for use in both hand drills and larger drilling machines; its extra short design improves stability especially in manual or angled operations. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters. This shape is easy to resharpen and withstands higher loads, making it well suited for demanding metalworking tasks. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills.
3.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Bauweise und geschliffene HSS-Geometrie sorgen für hohe Stabilität und eine saubere Bohrung in Stahl und Gusswerkstoffen. Der 135° Spitzenwinkel reduziert Anbohrzeiten und verbessert die Schneidwirkung bei härteren Werkstoffen. Bestellen Sie den Spiralbohrer von MetavCUT direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer HSS-G 3,8 mm (Kurz) von MetavCUT Spiralbohrer HSS-G in kurzer Ausführung für präzise Metallbohrungen auf Hand- und stationären Maschinen Spiralbohrer MetavCUT HSS-G geschliffen Kurzbohrer für hohe Stabilität Spitzenwinkel 135° für harte Stähle Für Handbohrmaschine und stationären Einsatz DIN 338 konform, Serie Standard Line Präzision und Stabilität für Metallbohrungen Die kurze Ausführung des Kurzbohrers reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren in Metall. Diese Bauform minimiert Vibration und Verbiegen, was besonders bei kleinen Durchmessern den Ausschuss reduziert. Die Kombination aus geschliffener Spannutengeometrie und kompakter Länge ermöglicht exakte Bohrungen mit reproduzierbarer Qualität, selbst bei handgeführten Einsätzen in Werkstatt und Montage. Materialqualität und Schneidgeometrie für härteste Anforderungen Der Einsatz von HSS-G (geschliffen) macht den Bohrer widerstandsfähig gegen Verschleiß und sorgt für sehr scharfe Schneiden. Der 135° Spitzenwinkel verringert das Auswuchten beim Anbohren und eignet sich speziell für legierte und unlegierte Stahlarten sowie Gusseisen und Temperguss. Kunden profitieren von schnellerem Vorschub und geringerer Anpresskraft, was die Produktivität bei Serienarbeiten erhöht. Geeignete Anwendungen und Maschinen Der Bohrer wurde für das Bohren in Metall konzipiert und ist sowohl für die Handbohrmaschine als auch für stationäre Säulenbohrmaschinen geeignet. Typische Einsatzfelder sind Reparaturwerkstätten, Maschinenbau und allgemeine Metallbearbeitung. Für präzise Passungen empfiehlt sich das Anpunkten mit einem Zentrierbohrer; für tiefe Bohrungen ist die kurze Ausführung hingegen weniger geeignet, hier lohnt sich mehrstufiges Aufbohren. Anwendungshinweise und Arbeitssicherheit Für optimale Ergebnisse wird Kühlschmierstoff bei Bohrungen in schmiede- oder gehärteten Stählen empfohlen, um Überhitzung zu vermeiden. Bei Verwendung von geschliffenen HSS-Bohrern auf stationären Maschinen sorgt langsame und konstante Vorschubkraft für lange Standzeiten. Das Einhalten von empfohlenen Schnittgeschwindigkeiten und regelmäßiges Nachschleifen oder Austausch verhindern Spanverklebung und Bruchrisiken. Empfehlung: Der geschliffene HSS-G Kurzbohrer von MetavCUT liefert präzise Ergebnisse mit hoher Standzeit – für Beratung und Bestellung wenden Sie sich an Metav Werkzeuge per Email info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 45038-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 338 Fakten Durchmesser: 3,8 mm Gesamtlänge: 70 mm Spirallänge: 39 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G — Geschliffen, hohe Rundlaufgenauigkeit Schaft-Ausführung: geschliffen (vollständig geschliffener Zylinderschaft) Ausführung: kurz — reduzierte Auskraglänge für Stabilität Für Bohrmaschine: Handbohrmaschine und stationär Typ: Typ N — Normalspirale für Metallbearbeitung DIN 338 — Norm für kurze Spiralbohrer mit Zylinderschaft FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der Spiralbohrer von MetavCUT (HSS-G, Typ N, SKU 45038-FDA) eignet sich besonders für legierte und unlegierte Stahlarten, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoff. Ist der Kurzbohrer für Handgebrauch sicher einsetzbar? Ja. Die kurze Ausführung des geschliffenen HSS-Bohrers bietet erhöhte Stabilität und eignet sich für die Handbohrmaschine ebenso wie für stationäre Maschinen, solange die Maschine ausreichend Steifigkeit bietet. Welche Vorteile hat der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert Anbohrkräfte und erhöht die Kontaktfläche, was die Anbohrzeit bei harten Werkstoffen verkürzt und die Standzeit des Bohrers verbessert. Wie sollte der Bohrer bei harten Materialien gekühlt werden? Bei Bohrungen in gehärteten Stählen empfiehlt sich die Verwendung von Kühlschmierstoff und moderaten Schnittgeschwindigkeiten. Der geschliffene HSS-Bohrer profitiert von kontinuierlicher Kühlung zur Vermeidung von Überhitzung. Worauf ist bei der Auswahl von Bohrmaschinen zu achten? Für präzise Ergebnisse mit dem MetavCUT Spiralbohrer (Standard Line) ist eine ausreichend steife Aufnahme und ein geringer Rundlauf der Spindel wichtig; bei Bedarf vorbohren bzw. anpunkten, um Wanderneigung zu vermeiden.
Reliable performance for daily drilling
The Standard line is a versatile series of HSS (high-speed steel) twist drills, also described as standard twist drills or precision HSS twist drills, engineered for everyday industrial and workshop use. Positioned between economy options and specialist pro-grade tools, the standard line delivers consistent, repeatable results for regular drilling tasks without the need for high-cost alloys.
How the standard line performs in practice
Designed as precision ground (HSS‑G) twist drills, the standard line combines a refined manufacture process with a classic geometry. A typical 118° tip and a cleanly formed point give good penetration and reliable centring, while extremely smooth flute surfaces support efficient chip evacuation. The result is stable running, improved hole quality and extended tool life under normal production and maintenance conditions.
Key advantages that matter on the shop floor
- Reduced rework thanks to high concentricity and precise hole quality
- Lower tool consumption through enhanced wear resistance from precision grinding
- Faster cycle times via efficient chip removal from smooth flutes
- Broad applicability across common materials: steel, cast iron, sintered metal, plastics and non‑ferrous metals
- Ideal balance of performance and cost for workshops, maintenance teams and assembly lines
Technical data
- Material: HSS (high-speed steel)
- Manufacture: precision ground (HSS-G)
- Tip angle: 118° (typical)
- Features: smooth flutes, optimised point geometry, excellent concentricity
- Applications: unalloyed steel, low-alloy steel, cast iron, sintered metal, plastics, non‑ferrous metals
Why Metav is the smart sourcing choice
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of technical know-how with a broad assortment, making high-quality measuring and workshop tools accessible to small and large operations alike. With over 48,000 customers, more than 250,000 products and a logistics hub in Emmerich, Metav offers dependable supply and a curated quality filter for the european market — the sensible route to equip your shop with standard line twist drills and complementary tooling.
FAQ
What materials are standard line twist drills suitable for?
The standard line twist drills are suitable for unalloyed and low‑alloy steel, cast iron, sintered metal, plastics and non‑ferrous metals, matching typical workshop and light industrial requirements.
How does the precision ground (HSS‑G) design benefit drilling results?
Precision ground manufacture increases concentricity and improves cutting edge finish, which leads to better hole quality, reduced vibration and longer tool life compared with roll‑formed entry‑level drills.
Are standard line drills a substitute for pro‑grade specialist drills?
Standard line drills are intended as the reliable everyday option; they deliver consistent performance for regular production and maintenance but are not a replacement when extreme loads or specialised alloys demand pro‑grade materials.
Which synonyms should procurement teams use when searching for these tools?
Search terms such as “standard twist drills”, “HSS standard drills” or “precision HSS twist drills” will reliably lead to the standard line and comparable products.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com