Reliable drilling performance with Standard Line twist drill
Standard Line twist drill and standard drills deliver consistent, precision holemaking for daily industrial and workshop use, combining durable high-speed steel construction with precision-ground flutes to ensure excellent runout and chip evacuation. Designed for machining unalloyed and low-alloy steel, cast iron, sintered metal, plastics and non-ferrous metals, these drills provide a balanced mix of wear resistance and hole quality for routine production and maintenance tasks. Ideal for workshops, maintenance departments and assembly plants, the system offers a dependable, cost-effective solution between entry-level and heavy-duty ranges, featuring an optimised 118° point for good penetration and centring. Key advantages include precision-ground construction, excellent chip evacuation and consistent hole quality.
10.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G, 10.5 mm, 135° Tip (Bright Finished) A Twist Drill in an extra long execution for deep metal drilling, designed for use with a Drilling Machine and optimised for precise work in hard materials. Extra-long design for deep drilling HSS‑G material for precise metal drilling 135° tip for hard materials like stainless steel Fully ground shank for high runout accuracy DIN 1869 standard for industrial use Faster deep drilling with reliable cutting performance The MetavCUT Extra Long Twist Drill combines HSS‑G material and an elongated geometry to deliver efficient deep-hole performance. Thanks to CNC grinding of the flutes, this design achieves up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS bits, which directly reduces operator effort and machine load. The 10.5 mm diameter and overall length of 430 mm with a spiral length of 295 mm make this tool especially suitable when deep bore depths or difficult access require an extended reach. Precise holes and consistent centring for demanding work A fully ground shank and precise flute geometry yield very sharp cutting edges and high concentricity, resulting in clean, accurate bores even in tough materials. The 135° tip reduces the tendency to wander when starting a hole and shortens the initial penetration time on harder steels and stainless grades. For operators unfamiliar with ground versus rolled drills: ground (HSS‑G) tools have flutes formed by grinding, not rolling, which produces higher sharpness and runout accuracy but requires careful handling and, ideally, cooling during use. Designed for metalworking professionals and industrial applications This Twist Drill is intended for metalworking tasks such as drilling in legated and unlegated steel, cast iron, sintered iron and certain hard plastics. Conforming to DIN 1869, the tool is engineered for industrial environments where repeatable, deep drilling is required. Use with stationary or robust handheld Drilling Machines is recommended; portable applications should ensure adequate support and cooling to avoid breakage. The bright finished surface supports chip evacuation and visual inspection of wear. Practical handling and operational advice for longer tool life To achieve the best results with an extra long HSS‑G Twist Drill, secure the workpiece well and use appropriate coolant or lubricant to manage heat in deep bores. Reduced feed forces, as enabled by the ground geometry, decrease radial stress on the bit, but the extended length increases bending risk, so avoid excessive lateral loads. If drilling wood, a metal twist drill can be used but will offer less guidance and a rougher finish than purpose-made wood bits; sharpening and regrinding are straightforward advantages of HSS tools. Strong recommendation: For professional deep-metal drilling choose the MetavCUT Extra Long Twist Drill (HSS‑G) and consult METAV Werkzeuge for tailored technical advice — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 34105-FDA Diameter: 10.5 mm Total length: 430 mm Spiral length: 295 mm Tip angle: 135° Material: HSS‑G Standard: DIN 1869 Execution / Type: Extra Long Shank execution: Fully ground Colour / Finish: Bright finished Intended machine: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The Twist Drill by MetavCUT is primarily used for drilling in metal; it performs especially well on legated and unlegated steel, cast iron and certain hard plastics. Its extra long design is intended for deep holes and for situations where extended reach is required. Which three main drill types exist? The main categories are metal drills, wood drills, and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for metalworking tasks.
10.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT kombiniert HSS-G-Schneidstoff, 135° Spitzenwinkel und geschliffene Schaftgeometrie für stabile, präzise Bohrungen in Stahl und Gusseisen; die verkürzte Ausführung reduziert Auslenkung und erhöht die Bohrgeschwindigkeit. Bestellen Sie den Bohrer bequem bei Metav oder kontaktieren Sie unsere Beratung für technische Fragen. Spiralbohrer von MetavCUT — kurzer HSS-G Spiralbohrer (Typ N) Der Spiralbohrer MetavCUT in kurzer Ausführung ist für präzise Metallbohrungen konzipiert und ideal für legierte und unlegierte Stähle sowie Gusswerkstoffe. Kurze Ausführung für höhere Stabilität HSS-G: geschliffen für scharfe Schneiden 135° Spitzenwinkel für harte Werkstoffe Zylinderschaft nach DIN 338 Geeignet für Handbohrmaschine und Stationärbetrieb Präzision und Stabilität bei Metallbohrungen Die verkürzte Bauform sorgt für deutlich geringere Auskraglänge und damit für höhere Stabilität beim Bohren in harten Werkstoffen. Durch die reduzierte Neigung zum Verbiegen wird die Bohrbahn stabiler geführt, was saubere, maßhaltige Löcher zur Folge hat. Dieser Vorteil macht sich besonders bei Bohrungen in Stahl und Temperguss bemerkbar, da weniger Korrekturen und Nacharbeit erforderlich sind und somit Zeit gespart wird. Material und Schneidleistung klar erklärt Der Einsatz von HSS-G (geschliffen) garantiert sehr scharfe Schneiden und hohe Rundlaufgenauigkeit; das Material ist speziell auf Metallbearbeitung abgestimmt. In Kombination mit dem 135° Spitzenwinkel dringt der Bohrer kontrollierter in zähe Werkstoffe ein, wodurch Anbohren und Ausbrechen minimiert werden. Die geschliffene Fertigung eignet sich besonders für stationäre Anwendungen und für Anwender, die saubere Bohrbilder in anspruchsvollen Materialien erwarten. Anwendungsfelder und Maschinenkompatibilität Bei einem Durchmesser von 10,5 mm fällt der Bohrer in den Standard-Bereich und ist damit vielseitig einsetzbar für Werkstatt, Montage und Reparatur. Die kurze Ausführung erlaubt den Einsatz sowohl in Handbohrmaschinen als auch in stationären Säulenbohrmaschinen, wobei die erhöhte Steifigkeit vor allem bei präzisen Bohrungen in legierten und unlegierten Stählen sowie Gusseisen Vorteile bringt. Die Norm DIN 338 dokumentiert die Ausführung als kurzen Spiralbohrer mit Zylinderschaft. Sicherer Einsatz und Handlingsempfehlungen Für langlebige Ergebnisse empfiehlt sich konstante Kühlung und moderate Vorschubgeschwindigkeit, insbesondere bei geschliffenen Bohrern, die spröder als gewalzte Varianten sein können. Vorbohren und Anpunkten reduzieren die Wanderneigung und verbessern das Ergebnis bei tiefen Bohrungen. Die kurze Ausführung ermöglicht weniger Vibration und somit eine reduzierte Belastung der Bohraufnahme und des Werkzeugs, was die Standzeit effektiv erhöht. Setzen Sie auf den MetavCUT Spiralbohrer Typ N 45105-FDA für präzise Stahlbohrungen und kontaktieren Sie bei Bedarf unsere Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 45105-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 10,5 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (geschliffen, hohe Schärfe) Schaftausführung: geschliffen (Zylinderschaft) Norm: DIN 338 — Norm für kurze Spiralbohrer mit Zylinderschaft Typ: Typ N (Normalspirale, geeignet für Metall) Ausführung: kurz Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Label: Spiralbohrer FAQ Für welche Werkstoffe eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer Typ N 45105-FDA mit HSS-G ist besonders geeignet für legierte und unlegierte Stähle, Gussstahl, Gusseisen und Hartkunststoff; der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer MetavCUT Standard Line ist für den Einsatz in Handbohrmaschinen ausgelegt; die kurze Ausführung reduziert Auslenkung und verbessert die Kontrolle bei Handbetrieb. Was bedeutet HSS-G und warum ist das wichtig? HSS-G steht für geschliffenen Schnellarbeitsstahl; der geschliffene Bohrer bietet sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Metall begünstigt. Der MetavCUT Spiralbohrer nutzt genau diese Eigenschaft. Wann ist die kurze Ausführung gegenüber Langbohrern vorteilhaft? Die kurze Ausführung minimiert Auskraglänge und Neigung zum Verbiegen, was bei präzisen oder harten Werkstoffen zu besseren Ergebnissen führt. Für tiefe oder mehrstufige Aufbohrungen ist hingegen ein längerer oder schrittweises Vorgehen zu empfehlen. Entspricht der Bohrer einer Norm und welche Bedeutung hat das? Der Bohrer entspricht DIN 338, das die Ausführung kurzer Spiralbohrer mit Zylinderschaft definiert; diese Norm sichert Maßhaltigkeit und Austauschbarkeit in industriellen Anwendungen.
10.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short, 10.5 mm, 135° tip, TiN-coated, short execution, DIN 338, HSS‑G The Twist Drill is a short Type N HSS‑G metalworking drill designed for stable, precise holes in hard materials and suitable for use in drilling machines. Short design for increased stability 10.5 mm diameter for precise metal holes 135° tip for harder materials like stainless steel TiN-coated for extended tool life Fully ground shank for high runout accuracy Precise results in demanding metalworking A short, fully ground HSS‑G twist drill delivers concentrated stability that reduces bending and runout during cutting. The 10.5 mm diameter combined with a 135° tip is tailored for harder materials; the larger tip angle shortens the initial penetration and helps centre the tool when starting a hole. Type N (normal spiral) describes the classical geometry for metal drilling and is therefore ideal when accurate, repeatable holes are required in steels and non‑ferrous metals. Faster cutting with lower feed forces Thanks to the ground flute geometry, this short drill requires significantly less axial pressure compared with conventional HSS drills, which improves operator comfort and reduces machine strain. The shorter overhang also increases stiffness, leading to cleaner bore surfaces and longer tool life under comparable conditions. For customers who value throughput, the ground design contributes directly to improved performance on stationary and portable drilling equipment. Coating that extends service intervals The TiN‑coating (Titanium Nitride) on the surface reduces friction and wear during metal cutting, especially when combined with appropriate coolant. This layer helps to lower thermal load at the cutting edge and thereby prolongs the effective life of the tool when working with alloyed and unalloyed steels, cast materials and non‑ferrous metals. For operations where maintenance intervals matter, the coating offers a tangible durability benefit. Built for workshop machines and professional use Engineered according to DIN 338 and manufactured as a short variant, this tool suits both stationary drilling machines and portable drilling setups when high precision is required. The fully ground shank ensures superior concentricity, making it especially suitable for machining centres and jig applications. The tool is part of the Standard Line and supports machining of tempered casts, sintered metals and harder plastics where controlled chip evacuation and edge quality matter. For precision metalworking tasks choose the MetavCUT short Twist Drill; for expert guidance and to ensure the right tool choice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) — METAV Werkzeuge provides comprehensive, competent consultation. Designation: Twist Drill Brand: MetavCUT SKU: 46105-FDA Diameter: 10.5 mm Overall length: 133 mm Flute length: 87 mm Tip angle: 135° Type: Type N Execution: short Material: HSS-G Shank: fully ground Coating: TiN-coated Standard: DIN 338 For machine: Drilling Machine Application: Drills for metal Model series: Standard Line Colour: TiN-coated Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill (short Type N) is primarily used for drilling metal; it performs well in alloyed and unalloyed steels, cast irons, copper alloys and hard plastics, offering precise, repeatable holes in demanding applications. For what is a Twist Drill mainly applied? A Twist Drill is mainly applied in the machining of high‑strength materials and for larger drill diameters; its geometry is easy to regrind and withstands considerable loads during cutting. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal‑drill category. Why are twist drills point‑ground? Point‑grinding reduces the cross‑cut at the tip of a Twist Drill, which lowers friction and therefore reduces required feed forces; simultaneously the ground point improves centring in the workpiece. Can a metal drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to regrind and typically show less self‑feeding in soft materials. For which drilling depths is the Twist Drill most commonly used? A full‑bore hole is usually executed with a Twist Drill; for diameters up to 20 mm and hole depths up to 100 mm the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The common belief that HSSE is categorically superior to HSS is incorrect; when choosing between HSS and HSSE, evaluate the specific working conditions to determine whether the higher cost of HSSE is justified.
10.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Twist Drill Bit, 10.5 mm, 135° Point Angle, Long, Bright Finished, DIN 340, HSS‑G A Twist Drill long version for metalworking and drilling machines, designed for deep or hard‑to‑reach holes with high precision. Long design for deeper, hard-to-reach holes HSS-G fully ground for precise, clean holes 10.5 mm diameter for medium-size metal holes 135° Point angle: ideal for harder materials Conforms to DIN 340 standard for stability High performance and measurable efficiency for metalworking The Twist Drill from MetavCUT combines a HSS‑G material and a fully ground geometry to deliver improved cutting performance. The CNC grinding process creates very sharp cutting edges and high concentricity, which results in precise holes and reduced vibration. In practice, this ground design can translate into noticeably faster drilling and lower required feed forces compared with rolled counterparts, making it a rational choice when task speed and repeatable accuracy matter most. Reach deeper with the long design for limited access tasks This long execution, compliant with DIN 340, offers a greater Total Length (184 mm) and Spiral Length (121 mm), allowing access to recessed or difficult bores. For workpieces where a standard length is insufficient, the extended geometry enables drilling without repositioning the part. The bright finished surface supports chip evacuation and helps maintain visibility of the cutting edge during setup on a Drilling Machine or Hand Drill. Optimised tip geometry and guidance for materials and handling The 135° Point Angle is selected to reduce walking and to perform better in harder materials such as stainless and alloyed steels. For less experienced users: a larger point angle reduces initial bite and improves centring for tough substrates. Because the HSS‑G ground flute geometry is sharper and more precise, safe operation benefits from adequate cooling and controlled feed rates; this reduces the risk of breakage and prolongs tool life when machining steels, cast materials, non‑ferrous metals and hard plastics. Who benefits and how to integrate this tool into workflows Metalworkers, maintenance technicians and toolroom professionals seeking consistent hole quality in medium diameters will value the stability and repeatability of this Standard Line tool. The fully ground shank supports precise clamping and concentricity in chucks, while the nominal 10.5 mm diameter is versatile for common mechanical assemblies. For best results, use appropriate cutting fluid and moderate spindle speeds matched to the material being drilled. Highly recommended: choose the MetavCUT long Twist Drill for demanding metal drilling tasks — for personal advice, matching tooling or technical data, METAV Werkzeuge offers expert consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 53105-FDA Diameter: 10.5 mm Point Angle: 135° Total Length: 184 mm Spiral Length: 121 mm Execution: Long Colour: Bright finished Shank Execution: Fully ground Material: HSS-G Standard: DIN 340 Intended For: Drilling Machine (Hand Drill) Application: Drills for Metal Model Series: Standard Line Packaging Unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Twist Drill) is mainly used for machining high‑strength materials and larger drill diameters; its ground geometry makes it suitable for demanding metalworking tasks and for drilling deeper holes where access is limited. Which three drill types exist? Common drill categories are Metal drill (like the MetavCUT Twist Drill), Wood drill, and Stone/Concrete drill. Each type is optimised in geometry and material for its intended substrate.
10.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT kombiniert HSS-Material, DIN 338-Konformität und den Typ‑N‑Schliff für stabile Metallbohrungen; dadurch ergibt sich hohe Standzeit und sichere Führung bei Handbohrmaschinen. Bestellen Sie den Bohrer direkt über Metav Werkzeuge oder fragen Sie unsere Fachberatung bei Bedarf an. MetavCUT Spiralbohrer 10,6 mm (HSS, kurz, DIN 338) Der Spiralbohrer von MetavCUT eignet sich als robuster Metallbohrer für präzise Bohrungen mit Handbohrmaschine und stationären Maschinen. Kurze Ausführung für erhöhte Stabilität HSS‑Material: elastisch und bruchreduzierend DIN 338 konformer Zylinderschaft Typ N Normalspirale für Metallbearbeitung Gesamtlänge 142 mm, Spirallänge 94 mm Höhere Stabilität durch kurze Ausführung und HSS‑Werkstoff Dank der kurzen Auskraglänge reduziert sich die Neigung zum Verbiegen, was bei Bohrungen in Stahl und Gusseisen die Genauigkeit erhöht. Der Einsatz von HSS (High Speed Steel) sorgt für Elastizität und verringert das Bruchrisiko, insbesondere bei Durchmessern unter 6 mm; bei 10,6 mm bleibt die Materialgüte weiterhin vorteilhaft, weil die Schneidkante Temperaturspitzen besser verträgt. Der praktische Nutzen besteht in längeren Standzeiten und weniger Maschinenstillstand. Konforme Norm und Spiralform für zuverlässige Metallbearbeitung Die DIN 338 definiert die kurzen Spiralbohrer mit Zylinderschaft und stellt sicher, dass Abmessungen und Aufnahme kompatibel sind. Die Normalspirale (Typ N) ist speziell für Metall geeignet und überzeugt durch gleichmäßige Spanabfuhr bei üblichen Stahl‑ und NE‑Metallen. Daraus ergibt sich für Werkstätten eine verlässliche Einsetzbarkeit sowohl in Handbohrmaschinen als auch in stationären Bohrern ohne aufwändige Anpassungen. Anwendungsempfehlung für Werkstatt und Montage Im Durchmesserbereich von 10,6 mm gehört dieses Werkzeug in den Standard‑Bereich für Werkstatt‑ und Montagetätigkeiten. Zur optimalen Führung empfiehlt sich vorbohren oder Anpunkten bei sehr harten Werkstoffen; bei üblichen Stählen erlaubt die Bohrgeometrie zügiges Vorankommen. Für den Anwender bedeutet das eine einfache Integration in bestehende Arbeitsabläufe und zuverlässige Ergebnisse bei Serien im kleinen bis mittleren Umfang. Vorteile der Geometrie: Spitzenwinkel und Spanabfuhr Der Spitzenwinkel 118° sorgt für gutes Zentrierverhalten auf flachen und leicht gewölbten Oberflächen und ist eine sinnvolle Wahl für viele Standardmetalle. Die angegebene Spirallänge von 94 mm erleichtert die Spanableitung, reduziert Verstopfungen und trägt so zu gleichmäßigen Bohrbildern bei. Insgesamt erleichtert die Kombination aus Geometrie und Material die Arbeit und minimiert Nacharbeit. Profitieren Sie von der präzisen Leistung des HSS‑Spiralbohrers von MetavCUT und sichern Sie sich das passende Werkzeug über Metav Werkzeuge; bei Fragen erreichen Sie unsere Fachberatung per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 40106-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Typ: Typ N Norm: DIN 338 Material: HSS Farbe: schwarz Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 Fakten Durchmesser: 10,6 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 118° Besonderheiten HSS: High Speed Steel (Schnellarbeitsstahl) DIN 338: Norm für Spiralbohrer mit Zylinderschaft Typ N: Normalspirale, geeignet für Metall Kurze Ausführung für erhöhte Stabilität Geeignet für legierten und unlegierten Stahl, Gusseisen und Nichteisenmetalle FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT mit HSS‑Material und 118° Spitzenwinkel eignet sich für viele Stahlsorten; bei sehr harten Edelstählen kann eine andere Geometrie oder eine geeignete Beschichtung nötig sein. Welche Maschinenaufnahme passt für den Bohrer? Der Bohrer entspricht der DIN 338 und hat einen Zylinderschaft, weshalb er problemlos in übliche Bohrfutter von Handbohrmaschinen und stationären Bohrmaschinen aufgenommen werden kann. Wie viele Bohrer sind in der Verpackungseinheit? Die Verpackungseinheit enthält 5 Stück; die Verpackungseinheit ist im Datenblatt angegeben und eignet sich für Werkstätten mit regelmäßigem Bedarf. Welche Vorteile bietet die kurze Ausführung gegenüber Standardlänge? Die kurze Ausführung reduziert Auskragung und erhöht die Stabilität, was bei Bohrungen in Stahl die Rundlaufgenauigkeit verbessert und Bruchrisiken verringert. Wie lautet die Artikelnummer, falls ich Ersatz bestellen möchte? Die Artikelnummer lautet 40106-FDA; beim Nachbestellen bitte MetavCUT Spiralbohrer und die SKU 40106-FDA angeben.
10.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Short Type N HSS‑E 10.6 mm, 135°, 5% Cobalt‑Alloyed (MetavCUT Standard Line) The Twist Drill is a short Type N HSS‑E metal drill designed for precise drilling in hard materials with a 10.6 mm diameter and a 135° tip. Short design for greater stability 10.6 mm diameter for precise holes 135° tip for harder materials like stainless steel 5% cobalt‑alloyed HSS‑E for improved wear resistance Fully ground shank, compliant with DIN 338 Higher precision and consistent hole quality for metalworking The Twist Drill from MetavCUT delivers consistent hole geometry thanks to its HSS‑E composition and precise ground flutes. The 5% cobalt‑alloyed steel increases red‑hardness and wear resistance, so the tool maintains its cutting edge longer when working in alloyed steels. For professional users this means fewer re‑drills and more reliable hole tolerances. The 135° tip reduces walking when starting a bore in hard materials, improving initial centring and reducing the need for pilot holes. Short length for greater rigidity and accuracy in demanding tasks A short execution reduces overhang and significantly limits deflection under load. With an overall length of 133 mm and a spiral length of 87 mm, this short Twist Drill provides enhanced stability on drilling machines, particularly when machining tough metals. The Type N normal spiral optimises chip removal for metalworking applications while the fully ground flutes ensure high roundness and clean hole edges. This combination is well suited to precise, stationary and mobile drilling in workshop environments. Designed for metal applications and professional users Intended primarily as a Drill for Metal, the MetavCUT Standard Line Twist Drill is aimed at metalworkers, toolrooms and maintenance professionals who demand repeatable results in Steel, Cast Iron, Non‑Ferrous Metals and Plastics. The Type N geometry is not ideal for very soft materials; for such tasks alternative geometries are preferable. The DIN 338 compliance assures standardised dimensions and makes selection and replacement straightforward in industrial settings. Regrinding, cooling and tips for longer tool life Because this Twist Drill is fully ground, it offers very sharp cutting edges and high runout accuracy; however, ground drills can be more brittle than rolled variants and benefit from controlled use. Use cutting fluid or coolant when drilling alloyed steels to reduce heat and prolong life. The 135° point reduces thrust and improves centring; if regrinding is needed, maintain the point geometry to preserve performance. For handheld operation, ensure firm clamping or use a drilling stand to exploit the short drill’s stability. For accurate metal drilling trust MetavCUT’s short Twist Drill for reliable stability and long tool life — METAV Werkzeuge offers expert advice and support by eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 47106-FDA Diameter: 10.6 mm Tip angle: 135° Type: Type N Material: HSS‑E (5% cobalt‑alloyed) Execution: Short Spiral length: 87 mm Overall length: 133 mm Shank execution: Fully ground Model series: Standard Line Norm: DIN 338 Application: Drills for metal Suitable for: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can I use the Twist Drill (MetavCUT Type N) with a handheld drilling machine? The MetavCUT Twist Drill with its short execution is suitable for use in a handheld Drilling Machine, but performance improves with firm clamping or a drill stand; the reduced overhang helps stability when hand‑held operation is necessary. How should the MetavCUT Twist Drill be maintained to maximise life? Regular use of cutting fluid, correct speeds and feeds for HSS‑E material, and careful regrinding while preserving the 135° point will keep the MetavCUT Twist Drill performing well; fully ground geometry benefits from controlled sharpening. For what is a Twist Drill used? A Twist Drill by MetavCUT is primarily applied to the machining of high‑strength materials and larger bore diameters; this form is easy to resharpen and withstands higher loads, making it suitable for demanding metalwork. Which 3 drill types exist? Common drill categories are Metal Drills (like the MetavCUT Type N), Wood Drills, and Masonry/Stone‑Concrete Drills.
10.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — 10.6 mm, 135°, short, bright finished, HSS‑G, DIN 338 (MetavCUT) The Twist Drill Type N is a short, fully ground HSS‑G drill designed for precise metal drilling applications with drilling machines and stationary tool setups. Short design for higher stability and precision 135° tip angle for harder materials and stainless steel HSS‑G fully ground for sharp cutting edges and clean holes Conforms to DIN 338 for standardised short spiral drills Suitable for use with Drilling Machines and similar equipment Short length increases stability and accuracy for metalworking A reduced overall length and shorter overhang significantly improve stability and reduce bending during machining. This short HSS‑G cutter is particularly suitable where rigid guidance and exact hole geometry are required. The compact geometry leads to less vibration and better concentricity, which in turn yields cleaner holes and improved surface finish in metallic workpieces. Fully ground HSS construction for faster, lower-force drilling The fully ground (HSS‑G) flute geometry produces very sharp cutting edges and high runout accuracy. Compared with rolled designs, this ground finish enables up to 40% faster drilling and typically requires 50% less feed force, making it easier to penetrate hard and alloyed steels. For demanding materials such as tempered steel and cast iron, the 135° tip reduces initial walking and shortens plunge time. Designed for demanding metal applications and professional users Engineers and machinists will appreciate that this short spiral drill — a classic Type N geometry — is tailored for metalworking on both stationary and portable drilling setups. Typical uses include drilling in alloyed and unalloyed steel, cast steel, sintered iron and non‑ferrous metals. The product is aimed at professional workshops and industries where durable, repeatable performance matters rather than occasional DIY use. Guidance for safe use and best results To maximise tool life and avoid chipping with the ground geometry, use appropriate cooling and moderate spindle speeds for the workpiece material. The shorter cutting length aids rigidity, but correct clamping and the use of a proper drill chuck or collet are essential for concentricity. For handheld machines, ensure the tool is mounted in a suitable chuck rated for the specified shank and runout requirements. Strong recommendation: Choose the MetavCUT short Twist Drill Type N for precision metal drilling — for expert advice or to confirm suitability for a specific application contact METAV Werkzeuge. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill / Short Spiral Drill Marke: MetavCUT SKU: 45106-FDA Diameter: 10.6 mm Spitzenwinkel: 135° Typ: Type N Colour: bright finished Ausführung: short Material: HSS-G Gesamtlänge: 133 mm Spirallänge: 87 mm Schaft Ausführung: fully ground Norm: DIN 338 For: Drilling Machine Modellserie: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A MetavCUT Twist Drill Type N is primarily used for machining high‑strength workpieces and larger drill diameters; the short, ground form is easy to regrind and withstands greater loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? Typical drill categories are Metal drills, Wood drills and Masonry/Concrete drills — the MetavCUT Twist Drill Type N belongs to the Metal drill group and is optimised for that application. Why are Twist Drills pointed? The pointed tip on a Twist Drill reduces the transverse cutting edge at the tip, which lowers friction and required feed force; this sharpening also improves centring of the tip in the workpiece for more accurate starts. Can a Twist Drill be used to drill wood? A Metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior to purpose‑made wood drills; however, metal drills are easier to regrind and exhibit lower self‑feed tendencies.
10.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Kombinieren Sie Stabilität und Präzision: Der kurze HSS-Spiralbohrer überzeugt durch hohe Standzeit, stabile Führungsqualitäten und einfache Einsetzbarkeit in Handbohrmaschinen; nutzen Sie die Wirtschaftlichkeit und Präzision für Ihre Metallbearbeitung und fragen Sie bei Bedarf die Beratung von Metav an. Spiralbohrer von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer nach DIN 338 für präzise Metallbohrungen in Werkstatt und Produktion Kurze Ausführung nach DIN 338 für hohe Stabilität HSS-Material: Gute Elastizität und reduzierte Bruchgefahr Typ N Normalspirale für Metallbearbeitung Geeignet für Handbohrmaschine und stationäre Maschinen Verpackungseinheit 5 Stück, SKU 40107-FDA Robustheit und Werkstoffwahl für langlebige Bohrungen Der HSS-Werkstoff (Schnellarbeitsstahl) sorgt für Elastizität und Standzeit bei typischen Metallanwendungen. Durch die rollgewalzte Fertigung ist die Schneidezähigkeit erhöht, was bei Bohrungen bis in mittlere Durchmesser die Bruchgefahr reduziert. Die kurze Ausführung minimiert Auslenkungen und verbessert dadurch die Rundlaufgenauigkeit, was insbesondere bei härteren Werkstücken zu saubereren Bohrungen führt. Praxistauglichkeit und Einsatzempfehlung im Alltag Mit einem Durchmesser von 10,7 mm liegt der Bohrer im Standard-Bereich und eignet sich daher hervorragend für Werkstatt, Montage und DIY-Projekte an Blechen, Profilen und Flachstahl. Die Typ N-Spirale ist die klassische Wahl für Metall; der Bohrer kann sowohl in Handbohrmaschinen als auch in stationären Maschinen eingesetzt werden. Für besonders genaue Passungen empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer. Schneidengeometrie und Anwendungsoptimierung Der Spitzenwinkel von 118° bietet gutes Eindringverhalten und eignet sich für viele allgemeine Metalle und Nichteisenwerkstoffe. Zur Verlängerung der Standzeit wird Kühlung beim Bohren in legierten Werkstoffen empfohlen und schrittweises Vorschneiden bei tieferen Löchern. Die kürzere Spirallänge reduziert Schwingungen und verbessert die Späneführung, wodurch die Oberflächenqualität der Bohrung steigt. Effizienzvorteile für Werkstatt und Produktion Die Kombination aus normaler Spiralgeometrie, HSS-Material und kurzer Bauform resultiert in einer wirtschaftlichen Lösung für Serien in kleinerem bis mittlerem Umfang. Die stabile Ausführung verringert Ausschuss und Nacharbeit, wodurch Zeit und Material eingespart werden. Die Lieferung in praktischer Verpackungseinheit erleichtert die Bevorratung in Werkstatt und Einkauf. Für präzise Metallbearbeitung empfiehlt MetavCUT den Einsatz dieses Spiralbohrers; bei Rückfragen zur Anwendung oder für Bestellinformationen kontaktieren Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 40107-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Fakten Durchmesser: 10,7 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Material: HSS (Schnellarbeitsstahl) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine Farbe: schwarz FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer aus HSS mit Typ N eignet sich für viele Stahlarten, bei hochlegierten oder sehr zähen Edelstählen empfiehlt sich jedoch Kühlung und gegebenenfalls ein Bohrer mit größerem Spitzenwinkel oder spezieller Beschichtung. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und der Zylinderschaft machen den MetavCUT Spiralbohrer praxisgerecht für Handbohrmaschine sowie für stationäre Maschinen. Brauche ich ein Vorbohren für 10,7 mm? Für den genannten Durchmesser ist direktes Bohren im Standardfall möglich; bei hoher Maßgenauigkeit empfiehlt sich vorher ein Zentrierbohrer oder ein kleines Vorbohrmaß. Wie verlängere ich die Lebensdauer des Bohrers? Regelmäßige Kühlung, moderater Vorschub und saubere Werkzeugaufnahme erhöhen die Standzeit des HSS Spiralbohrers von MetavCUT. Was bedeutet DIN 338 konkret für den Anwender? DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft; das garantiert definierte Abmessungen, Austauschbarkeit und eine auf Stabilität ausgelegte Konstruktion. Wie viele Bohrer sind pro Verpackungseinheit enthalten? Die Verpackungseinheit enthält 5 Stück, SKU 40107-FDA.
10.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Nutzen Sie die Kombination aus Kurzformat, HSS-E-Werkstoff und 135°-Spitzenwinkel für präzise, langlebige Metallbohrungen. Vertrauen Sie auf die DIN‑338-Konformität und bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (Kurz, HSS‑E) Der Spiralbohrer in Kurz‑Ausführung ist für präzise Metallbohrungen an Handbohrmaschinen und stationären Maschinen konzipiert und eignet sich besonders für legierten und unlegierten Stahl. Spiralbohrer »47107‑FDA« von MetavCUT Kurzformat für höhere Stabilität HSS‑E mit 5% Kobaltlegierung Geschliffener Zylinderschaft für Präzision Spitzenwinkel 135° für harte Werkstoffe Stabilität und Kontrolle durch Kurze Bauform Das Kurzformat reduziert die Auskraglänge und erhöht dadurch die Stabilität während des Bohrens. Diese geringere Hebelwirkung sorgt für weniger Vibrationen und ein sauberes Lochbild, was besonders bei Präzisionsarbeiten in Stahl und Gusseisen entscheidend ist. Für Anwender bedeutet das weniger Nacharbeit und eine höhere Prozesssicherheit beim Einsatz mit Handgeführten Maschinen oder Säulenbohrern. Werkstoff und Geometrie verringern Bruchrisiko Der Einsatz von HSS‑E mit 5% Kobaltlegierung kombiniert Zähigkeit und Verschleißfestigkeit, sodass der Bohrer auch bei höheren Temperaturen stabil bleibt. Die geschliffene Geometrie erzeugt scharfe Schneiden und verbessert die Rundlaufgenauigkeit, während der Spitzenwinkel 135° das Anbohren harter Werkstoffe wie Edelstahl erleichtert und das Risiko von Ausrissen reduziert. Einsatzbereiche und Maschinenkompatibilität Dieses Kurzformat eignet sich für allgemeine Metallbearbeitung, Montagearbeiten und Instandsetzungen; ideal für die Bearbeitung von Stahl, Gusseisen, Nichteisenmetallen und Kunststoffen. Der Bohrer ist kompatibel mit Handbohrmaschinen sowie stationären Maschinen mit Zylinderschaftaufnahme und liefert bei korrekter Kühlung und geeigneter Vorschubgeschwindigkeit zuverlässige Ergebnisse. DIN‑Norm, Typ und Arbeitsempfehlungen Die Fertigung nach DIN 338 garantiert eine standardisierte Form und Austauschbarkeit. Der Bohrer vom Typ N (Normalspirale) ist für typische Metallanwendungen optimiert; bei hoher Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrier- oder Zapfenbohrer. Bei Löchern bis zu 6 mm empfehlen sich hohe Drehzahlen und moderate Vorschübe, um Spanbildung zu kontrollieren und Bruchrisiken zu minimieren. Setzen Sie auf die Präzision von MetavCUT und sichern Sie sich den Spiralbohrer über Metav Werkzeuge; Fragen beantwortet unser Team per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47107‑FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Fakten Durchmesser: 10,7 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS‑E (Schnellarbeitsstahl) Farbe: 5% Kobaltlegiert Schaft Ausführung: geschliffen (Zylinderschaft) Typ: Typ N (Normalspirale) Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Hersteller: MetavCUT FAQ Für welche Materialien eignet sich der Bohrer am besten? Der Spiralbohrer von MetavCUT (Typ N, SKU 47107‑FDA) ist für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe ausgelegt und liefert bei diesen Werkstoffen saubere Bohrlöcher. Ist der Bohrer für den Einsatz in Handbohrmaschinen geeignet? Ja, die Kurz‑Ausführung und der geschliffene Zylinderschaft machen den Bohrer von MetavCUT (Spiralbohrer, SKU 47107‑FDA) auch für Handbohrmaschinen geeignet; dennoch sind hohe Rundlaufgenauigkeit und passende Spannfutter wichtig. Welche Vorteile bietet die 5% Kobaltlegierung? Die 5% Kobaltlegierung erhöht die Warmfestigkeit und Verschleißfestigkeit des HSS‑E‑Materials, wodurch der Bohrer länger scharf bleibt und bei höheren Schnittgeschwindigkeiten stabil arbeitet. Wann ist der Spitzenwinkel 135° empfehlenswert? Ein Spitzenwinkel von 135° eignet sich vor allem für härtere Werkstoffe wie Edelstahl; er reduziert das Aufspringen beim Anbohren und verbessert die Zentrierung beim Beginn der Bohrung. Muss bei diesem Bohrertyp gekühlt werden? Für längere Standzeiten und saubere Spanabfuhr empfiehlt sich beim Bohren in Stahl oder zähen Werkstoffen die Verwendung von Kühl‑/Schmierstoff, insbesondere bei stationärem Einsatz.
10.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT kombiniert HSS-G-Material, einen Spitzenwinkel 135° und eine reduzierte Auskraglänge für höhere Stabilität und schnelleres Bohren in Stahl. Nutzen Sie die gesteigerte Präzision und die robuste Schaftausführung für stationäre oder handgeführte Anwendungen und fragen Sie bei Bedarf die Beratung von Metav an. Spiralbohrer von MetavCUT — kurzer HSS-G Metallbohrer (Typ N) Der Spiralbohrer ist eine kurze, geschliffene Ausführung nach DIN 338 zur präzisen Bearbeitung von legierten und unlegierten Stählen sowie Gusswerkstoffen. kurze Ausführung für höhere Stabilität HSS-G geschliffen für scharfe Schneiden und Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe Spirallänge 94 mm, Gesamtlänge 142 mm Zylinderschaft und DIN 338 Konformität, SKU 45107-FDA Höhere Stabilität durch kurze Auskraglänge für präzise Bohrungen Die verkürzte Auskraglänge macht die kurze Ausführung besonders steif und reduziert das Risiko von Verbiegen und Wanderung beim Anbohren. Diese Eigenschaft führt zu saubereren Bohrlöchern und weniger Nacharbeit bei Mehrteilsserien. Vorteilhaft ist dies vor allem bei der Bearbeitung von Stahl und anderen harten Werkstoffen, wo Rundlaufgenauigkeit und präziser Schnittwinkel entscheidend sind. Effizienz und Materialvorteil durch HSS‑G geschliffene Geometrie Dank HSS-G und geschliffener Spannuten bietet der Bohrer sehr scharfe Schneiden und eine hohe Oberflächenqualität der Bohrung. Die geschliffene Ausführung ermöglicht bei geeigneter Kühlschmierstoffzufuhr ein bis zu 40 % schnelleres Bohren bei gleichzeitiger Reduktion der Anpresskraft. Dieser Vorteil sorgt für kürzere Durchlaufzeiten in der Produktion und geringere Belastung der Maschine. Bessere Eignung für harte Werkstoffe durch 135° Spitzenwinkel Der Spitzenwinkel 135° wurde gewählt, um das Anbohren von harten Materialien wie Edelstahl zu erleichtern und gleichzeitig die Zentrierwirkung zu verbessern. Diese Geometrie verringert das Aufbiegen bei Anbohren und verlängert die Werkzeugstandzeit, wenn geeignete Schnittbedingungen und Kühlung eingehalten werden. So bleibt die Passgenauigkeit von Verbindungselementen zuverlässig erhalten. Kompatibilität, Anwendung und Handhabung in Werkstatt und Produktion Die Zylinderschaft‑Ausführung erlaubt einfache Spannungen in handelsüblichen Spannfuttern von Handbohrmaschinen und stationären Säulenmaschinen. Verwendung findet der Bohrer bei allgemeinen Metallarbeiten, Reparaturen und Serienfertigung im Standard‑Bereich (2,0–13,0 mm). Für beste Ergebnisse wird punktuelles Anspitzen bei hoher Präzision empfohlen und Kühlmittel bei zähen Materialien angeraten. Empfehlung: Das MetavCUT Standard Line Kurz‑Spiralbohrer‑Konzept wählen für präzise Metallbohrungen und technische Zuverlässigkeit — Fragen Sie Ihre Lieferung direkt bei Metav an: info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 45107-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Hersteller: MetavCUT Serie: Standard Line Norm: DIN 338 Ausführung: kurz Schaftausführung: geschliffen Typ: Typ N Für Bohrmaschine: Handbohrmaschine Farbe: blank Daten Durchmesser: 10,7 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G Zylinderschaft Geschliffen (CNC‑Schliff) Eignung: Bohrer für Metall Konformität: DIN 338 FAQ Für welche Materialien ist dieser Spiralbohrer geeignet? Der MetavCUT Spiralbohrer (Standard Line, SKU 45107-FDA) wurde für legierte und unlegierte Stähle, Gussstahl, Gusseisen und Nichteisenmetalle sowie Hartkunststoffe entwickelt und eignet sich besonders bei härteren Werkstoffen dank des Spitzenwinkels von 135°. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die Zylinderschaft‑Ausführung und die kurze Bauform machen den MetavCUT Spiralbohrer auch für Handbohrmaschinen einsetzbar, wobei bei anspruchsvollen Werkstoffen Kühlung und kontrollierte Vorschübe empfohlen werden. Welche Vorteile bietet die geschliffene HSS‑Ausführung? Die HSS‑G geschliffene Geometrie des MetavCUT Spiralbohrers sorgt für scharfe Schneiden, hohe Rundlaufgenauigkeit und saubere Bohrlöcher; das ist besonders bei präzisen Metallbohrungen vorteilhaft. Warum wurde ein Spitzenwinkel von 135° gewählt? Der 135° Spitzenwinkel reduziert das Aufbiegen beim Anbohren harter Werkstoffe und verbessert die Zentrierung, was die Standzeit erhöht und die Maßhaltigkeit der Bohrung verbessert. Wie viele Bohrer sind in einer Verpackungseinheit enthalten? Die Verpackungseinheit des MetavCUT Spiralbohrers beträgt 5 Stück.
10.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short shank, Ø 10.8 mm, 118° tip, HSS, black, DIN 338, MetavCUT A Twist Drill by MetavCUT designed for precision metalworking with a short shank and 118° tip for stable, machine or hand-held drilling Short shank according to DIN 338 for high stability High Speed Steel (HSS) for durable metal drilling Classic Type N geometry for reliable centring in metal 118° tip angle for controlled penetration and less snagging Suitable for Drilling Machine and robust hand drills Outstanding metalworking performance for precision tasks This short HSS cutter delivers consistent hole quality in a range of metals. The reduced overhang and compact overall length ensure minimal runout and improved concentricity when using a Drilling Machine or a hand-held drill. With a 10.8 mm diameter and a 118° tip, the tool is optimised for controlled entry and reliable chip evacuation, which reduces the need for rework and increases throughput on repetitive tasks. Durable material and manufacturing benefits Manufactured from High Speed Steel (HSS), the bit combines toughness and heat resistance for prolonged tool life under standard metal-drilling conditions. The short design specified by DIN 338 enhances rigidity, lowering the risk of breakage when drilling hardened or alloyed steels. HSS technology also allows easier re-sharpening, keeping the tool in service longer and offering economic advantages during frequent maintenance cycles. Designed for secure use in machines and handheld applications The short version reduces lever arm effects and provides better control during plunge starts and when approaching curved surfaces. The Type N geometry is the conventional spiral profile for metal; it balances chip removal and cutting action, making it suitable for a wide range of ferrous and non-ferrous materials. The black surface finish offers basic corrosion resistance and simple visual inspection of wear. Practical guidance and intended users Workshops, maintenance teams and metal fabricators benefit from the tool’s stability and serviceability. For best results, use appropriate cutting fluid when working on alloyed steels, and ensure the chuck runout is minimised. The classic construction is not optimised for very soft materials where specialised point geometries are preferable. For questions about compatibility with specific machines or alloys, expert advice is available. Highly recommended: choose the MetavCUT Twist Drill when accurate, repeatable metal holes are required — for individual projects or production runs contact METAV Werkzeuge for expert consultation via email info@metav-werkzeuge.com or phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill (Short) Marke: MetavCUT SKU: 40108-FDA Diameter: 10.8 mm Tip angle: 118° Type: Type N Material: HSS (High Speed Steel) Overall length: 142 mm Spiral length: 94 mm Execution: short Colour: black Application: Drills for Metal For drilling machine: Drilling Machine / Hand Drill Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is designed to bore precise, cylindrical holes in alloyed and unalloyed steels, cast iron, non-ferrous metals and many plastics while offering good centring and stable cutting behaviour. Which three drill types exist? Common drill categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for such materials. For what tasks are twist drills typically applied? A Twist Drill is mainly employed for machining high-strength materials and larger bore diameters; its shape allows easy re-sharpening and it resists greater loads during operation. Why are twist drills pointed? Pointing reduces the cross-edge at the tip and lowers friction; by regrinding to a defined tip angle such as 118°, the drill needs less feed force and centres more reliably in the workpiece.
10.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Kompakte Kombination aus Stabilität und Härte macht dieses Werkzeug ideal für präzise Metallbohrungen. Die Kurz-Ausführung reduziert Auslenkung, der HSS-E Werkstoff mit 5% Kobalt verbessert die Warmfestigkeit und verringert Bruchrisiken bei Durchmessern unter 6 mm. Nutzen Sie die robuste Spitzengeometrie und die geschliffene Schaftausführung für saubere Bohrlöcher. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 10,8 mm von MetavCUT (Kurzausführung, HSS-E) Spiralbohrer bietet eine kurze Spiralgeometrie für stabile und präzise Metallbohrungen in stationären und handgeführten Anwendungen HSS-E mit 5% Kobalt für erhöhte Warmfestigkeit Kurz-Ausführung für hohe Stabilität bei Präzisionsbohrungen Geschliffener Zylinderschaft für exakten Rundlauf Spitzenwinkel 135° für harte Werkstoffe wie Edelstahl Geeignet für Handbohrmaschine und stationären Einsatz Kompakte Geometrie sorgt für weniger Auslenkung und präzisere Löcher Die kürzere Auskraglänge reduziert Biegemomente und Vibrationen, sodass bei Bohrungen in Stahl und Gusseisen saubere Löcher entstehen. Durch die reduzierte Länge erhöht sich die Stabilität beim Einsatz in Handbohrmaschine ebenso wie in Säulenbohrmaschinen. Anwender profitieren von besserem Rundlauf und geringerer Werkzeugbelastung, was Nacharbeit und Werkzeugverschleiß verringert. HSS-E Legierung mit Kobalt für lange Lebensdauer bei Metallbearbeitung Der Einsatz von HSS-E mit 5% Kobalt erhöht die Warmfestigkeit und verschiebt die Grenze für thermische Beanspruchung nach oben. Dadurch eignet sich der Bohrer besonders für legierten und unlegierten Stahl sowie für Nichteisenmetalle und Kunststoffe. Die Materialwahl sorgt für konstante Schneidleistung und verlängerte Standzeit gegenüber unlegierten HSS-Werkzeugen. Geschliffene Fertigung und 135° Spitzenwinkel für harte Werkstoffe Die geschliffene Schaft- und Spanutengeometrie gewährleistet scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was saubere Bohrbilder in Metall garantiert. Der Spitzenwinkel 135° erleichtert das Anbohren harter Werkstoffe und reduziert Wanderneigung. Für anspruchsvolle Metallbearbeitung liefert diese Kombination sichtbare Qualitätsvorteile bei stationärer Nutzung und bei vorsichtigem Handbetrieb. Passende Anwendungsempfehlungen für den Standard-Durchmesserbereich Mit einem Durchmesser von 10,8 mm zählt dieses Werkzeug zum Standard-Bereich, ideal für Werkstatt, Montage und allgemeine Metallarbeiten. Für präzisere Passungen vor Zentrieren anpunktieren, bei tiefen Bohrungen mehrstufig vorbohren. Die kurze Ausführung empfiehlt sich besonders dort, wo Steifigkeit und definierte Bohrbilder gefragt sind. Empfehlung: Greifen Sie auf die bewährte Qualität von MetavCUT Standard Line zurück und wählen Sie diesen Spiralbohrer für stabile, präzise Metallbohrungen bei hoher Standzeit — bei Fragen erreichen Sie uns per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47108-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Typ: Typ N Norm: DIN 338 Daten Durchmesser: 10,8 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten HSS-E: Schnellarbeitsstahl mit Kobaltanteil, hohe Warmfestigkeit 5% Kobaltlegiert: verbesserte Schneidrandstabilität geschliffen: CNC-Schliff für hohe Rundlaufgenauigkeit Typ N: Normalspirale für Metallanwendungen DIN 338: Norm für kurze Spiralbohrer mit Zylinderschaft FAQ Für welche Materialien eignet sich dieser Spiralbohrer am besten? Der Spiralbohrer von MetavCUT aus der Standard Line eignet sich vor allem für legierten und unlegierten Stahl, Gusseisen sowie für Nichteisenmetalle und Kunststoffe; die 5% Kobaltlegierung erhöht die Eignung für härtere Werkstoffe. Ist der Bohrer für die Verwendung in Handbohrmaschinen geeignet? Ja, der Spiralbohrer ist für Handbohrmaschine geeignet, wobei die kurze Ausführung die Stabilität erhöht; bei hoher Präzision empfiehlt sich vorheriges Anpunktieren. Welche Vorteile bietet die geschliffene Schaftausführung? Die geschliffene Fertigung sorgt für scharfe Schneidkanten und exakten Rundlauf, wodurch sauberere Bohrlöcher und geringerer Nacharbeitbedarf entstehen. Wann empfiehlt sich der Spitzenwinkel von 135°? Der Spitzenwinkel 135° ist vorteilhaft beim Anbohren harter Werkstoffe wie Edelstahl, weil er die Wanderneigung reduziert und die Anbohrkraft verteilt. Welche Norm und Typisierung hat dieser Bohrer? Der Bohrer entspricht der DIN 338 als kurze Spiralbohrer mit Zylinderschaft und ist als Typ N (Normalspirale) klassifiziert.
10.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Type N, Ø 10.8 mm, 135°, Bright Finished, Fully Ground Shank (DIN 338) by MetavCUT The Twist Drill is a short Type N drill for Drilling Machines, engineered for precise metalworking and reliable performance in hard materials. Short design increases stability and reduces runout High‑grade HSS‑G for sharp edges and long life 135° tip angle for harder Metals and reduced chipping Fully ground shank for accurate concentricity Conforms to DIN 338 for short cylindrical twist drills Precision that cuts working time and effort A short Twist Drill in HSS‑G is designed to deliver higher Stability and faster feed rates compared with longer or rolled variants. The reduced overhang limits deflection and improves concentricity, so holes are truer and rework is minimized. This makes the tool especially suitable when consistent hole quality is required in alloys, cast steels and tempered materials, where the 135° tip reduces chipping and shortens the initial penetration time. Engineered for demanding metal applications Built according to DIN 338, the short execution and the fully ground shank mean this drill achieves clean, precise bores in a wide range of metals including alloyed and unalloyed steel, cast iron and non‑ferrous metals. The CNC grinding process creates very sharp cutting edges and excellent runout accuracy, which supports faster drilling—up to 40% quicker in typical conditions—and lowers the required feed force by about 50% compared with conventional HSS variants. Who benefits from this tool and how to use it Metalworkers, toolroom technicians and machine shop operators will value the combination of Precision and robustness offered by this short HSS drill. For best results, use appropriate cutting fluid and secure workholding; the shortened flute length favors stationary or low‑overhang setups on bench or production Drilling Machines. The Type N geometry represents the classic metalworking spiral, balancing chip evacuation and edge strength for routine and demanding tasks. Care, handling and practical advantages Regular sharpening can extend service life, and because the ground geometry yields sharper edges, reheating or controlled cooling during use is recommended to avoid heat‑related tempering. The bright finished surface eases chip flow and inspection, while the short overall length supports use in tight fixturing. For operations seeking repeatable hole quality with reduced cycle time, this tool offers a clear productivity advantage. For precision metalworking tasks choose MetavCUT’s short Twist Drill and contact METAV Werkzeuge for expert technical advice and purchasing support via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271. Designation: Twist Drill Brand: MetavCUT SKU: 45108-FDA Diameter: 10.8 mm Tip angle: 135° Type: Type N Execution: short Spiral length: 94 mm Overall length: 142 mm Shank execution: fully ground Material: HSS‑G Colour / Surface: Bright finished Suitable for: Drilling Machine Application: Drills for metal Standard: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill is mainly used for machining metal; it is particularly suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast and non‑ferrous metals, as well as hard plastics when precision and durable cutting edges are required. Which three drill types exist? Common distinctions are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category designed for metalworking tasks. For what is a Twist Drill primarily used? A Twist Drill is primarily applied to machining high‑strength materials and larger diameters; its form is easy to resharpen and withstands higher loads, making it a standard choice for demanding metal drilling. Why are Twist Drills pointed? Pointing reduces the cross‑edge at the tip of the Twist Drill; this lowers friction so less feed force is required and improves centring of the tip in the workpiece. Can a metal Twist Drill be used for drilling wood? A metal (HSS) drill can be used in wood, but guidance and hole finish are typically inferior to that from a dedicated wood drill; however, these drills are simpler to resharpen and have less aggressive self‑feeding. At which drilling depths is the Twist Drill most commonly used? For through‑hole drilling, a Twist Drill is often used; it is the most frequent tool for diameters up to 20 mm and drilling depths up to 100 mm.
10.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT verbindet HSS-Material, DIN 338-Norm und eine kompakte Bauform zu einem robusten Werkzeug für präzise Metallbohrungen; die kurze Auskraglänge sorgt für erhöhte Stabilität und reduziert das Bruchrisiko bei Durchmessern bis 6 mm. Nutzen Sie die Kombination aus Stabilität, Normkonformität und Werkstoffqualität für gleichbleibend saubere Bohrbilder. Bestellen Sie direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (HSS, Typ N, DIN 338) Der Spiralbohrer von MetavCUT ist ein kurz ausgeführter HSS‑Bohrer für Metallbearbeitung an stationären und handgeführten Maschinen. Spiralbohrer »40109-FDA« von MetavCUT HSS‑Werkstoff für hohe Zähigkeit und Standzeit Kurz-Ausführung: erhöhte Stabilität bei Präzision DIN 338: Norm für kurze Spiralbohrer mit Zylinderschaft Typ N Normalspirale für allgemeine Metallbearbeitung Hohe Präzision durch kurze Bauform und HSS Die kompakte Ausführung des Bohrers reduziert die Auskraglänge und minimiert so Schwingungen und Verkantungen; das führt zu präzisen Bohrungen in Stahl und Gusseisen. Durch den Einsatz von HSS (Schnellarbeitsstahl) bleibt der Schneidstoff elastisch, wodurch das Bruchrisiko bei feinen Bohrungen deutlich verringert wird. Diese Kombination sorgt für reproduzierbare Ergebnisse bei wiederkehrenden Metallarbeiten. Materialwahl und Anwendungsnutzen für den Werkstattalltag Die Verwendung von HSS erlaubt das Bohren in legiertem und unlegiertem Stahl, in Nichteisenmetallen und in Kunststoffen, ohne dass sofortige Härtebehandlungen nötig sind. Für Anwender bedeutet das: zuverlässige Durchdringung und geringere Nacharbeit. Der Typ‑N Schneidenwinkel mit 118° ist optimal für gängige Metallwerkstoffe und erleichtert das Zentrieren auf leicht gewölbten Oberflächen. Echte Einsatzempfehlung für Maschine und Arbeitsverfahren Der kurze Spiralbohrer eignet sich sowohl für stationäre Säulenbohrmaschinen als auch für Handbohrmaschinen, sofern die Maschine ausreichend Spindelsteifigkeit bietet. Bei größeren Durchmessern empfiehlt es sich, vorzuplanen und gegebenenfalls vorzubohren; bei diesem Exemplar mit 10,9 mm Durchmesser sorgt die stabile Spiralform für sauberen Spanabtransport und gleichmäßigen Vorschub. Anwendungstipps für längere Standzeit und bessere Bohrbilder Vorbohren mit kleineren Durchmessern entlastet die Querschneide und reduziert Wärmeentwicklung; Schmierschmierstoff oder Kühlschmiermittel verlängern die Lebensdauer der Schneide zusätzlich. Der Anwender profitiert von weniger Ausbrüchen am Werkstückrand und von leichterer Nachbearbeitung; so bleibt die Produktivität in Serien- und Einzelarbeiten hoch. Empfehlen Sie den MetavCUT Spiralbohrer für anspruchsvolle Metallbohrungen und nutzen Sie die technische Beratung von Metav per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 40109-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Hersteller: MetavCUT Fakten Durchmesser: 10,9 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Material: HSS (Schnellarbeitsstahl, hohe Zähigkeit) Norm: DIN 338 (Kurzspiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale für Metall) Farbe: schwarz Für Bohrmaschine: Handbohrmaschine FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der MetavCUT Spiralbohrer aus HSS ist für viele Edelstahlarten geeignet, für besonders harte Edelstähle kann eine geeignete Beschichtung oder ein spezieller Spitzenwinkel sinnvoll sein. Welche Aufnahme passt für diesen Spiralbohrer? Der kurze Spiralbohrer mit Zylinderschaft wird typischerweise direkt im Spannfutter von Handbohrmaschine oder Säulenbohrmaschine gehalten. Wie vermeide ich Bruch bei feinen Bohrungen mit dem MetavCUT Spiralbohrer? Verwenden Sie hohe Drehzahlen, geringen Vorschub und gegebenenfalls Kühlschmierstoff; die kurze Ausführung und der rollgewalzte HSS‑Werkstoff reduzieren das Bruchrisiko erheblich. Was bedeutet die DIN 338 Kennzeichnung an diesem Bohrer? Die DIN 338 bezeichnet kurze Spiralbohrer mit Zylinderschaft und stellt Maße, Toleranzen und Ausführungen für die Fertigung sicher. Ist der Spiralbohrer für Serienfertigung geeignet? Für mittlere Serien in normalem Baustahl ist der MetavCUT Spiralbohrer geeignet; bei sehr großen Stückzahlen oder gehärteten Werkstoffen sind Hartmetalllösungen in der Regel wirtschaftlicher.
10.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short HSS‑E, 10.9 mm, 135° (5% cobalt‑alloyed) The Twist Drill is a short Type N drill bit designed for precision metalworking with drilling machines, offering a 10.9 mm diameter and a 135° point angle for hard materials. Short design for increased stability 10.9 mm Diameter for precise holes 135° Point angle for hard metals HSS‑E with 5% cobalt for wear resistance Fully ground shank for high runout accuracy Durable Material for Longer Tool Life and Tough Conditions The short Twist Drill is manufactured from HSS‑E (High Speed Steel with Cobalt), which increases heat resistance and wear performance when drilling hard or alloyed Metals. Because the alloy contains 5% cobalt, the Bit sustains higher temperatures without losing hardness, so users benefit from longer tool life during demanding operations. The short design reduces overhang and therefore lowers bending stress, resulting in fewer tool failures under heavy loads and higher process reliability. Precision Drilling and Why the 135° Point Angle Matters With a 135° Point Angle the Twist Drill penetrates hard Materials more cleanly and with reduced walking on the surface, which improves centring and minimises rework. The fully ground flute geometry produces sharp cutting edges and high runout accuracy, delivering clean, accurate Holes in Steel and other tough Metals. For customers unfamiliar with drilling geometry: a larger Point Angle spreads the cutting action over a wider area, slowing penetration slightly but reducing the risk of chipping in stainless or hardened Steels. Best Applications and Machine Compatibility This short Type N Twist Drill is optimised for use in a Drilling Machine or portable Hand Drills when rigidity and precision are required. The design follows DIN 338, the standard for short cylindrical‑shank twist drills, ensuring consistent length and tolerance for industrial setups. Use with appropriate coolant and moderate feed rates for the best results on alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Plastics. For thin materials or soft Woods, alternative specialised Bits yield better finish and guidance. Practical Advantages for Professional Users Because of the reduced flute length, the Bit exhibits less deflection and greater stability, making it especially suitable for accurate positioning and repeatable production runs. The 10.9 mm Diameter is ideal for through‑holes in metalwork where tight tolerances matter. The short, ground construction enables easier regrinding and maintenance compared with rolled alternatives, which suits workshops that prefer to refurbish tools on site rather than replace them frequently. Who Should Choose This Drill and Why It Stands Out Engineers, machinists and maintenance technicians working with moderate to high‑strength Metals will benefit most from the Twist Drill’s balance of durability and accuracy. The combination of HSS‑E material, a short overall length and a fully ground shank provides a robust solution for industrial and workshop environments where repeatability and tool life are priorities. This Bit is part of the Standard Line by MetavCUT and is designed to meet common industrial demands without the need for specialised handling. Strong recommendation: opt for the MetavCUT Twist Drill for demanding metal drilling—METAV Werkzeuge provides expert technical advice and tailored support via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Data Bezeichnung: Twist Drill Marke/Hersteller: MetavCUT SKU: 47109-FDA Typ: Typ N Durchmesser: 10.9 mm Spitzenwinkel: 135° Ausführung: kurz Farbe: 5% cobalt-alloyed Material: HSS-E Schaft Ausführung: geschliffen (fully ground) Spirallänge: 87 mm Gesamtlänge: 133 mm Für Bohrmaschine: Drilling Machine (Handbohrmaschine) Modellserie: Standard Line Norm: DIN 338 Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength Materials and larger hole diameters in Metalwork; its short, robust design is easy to sharpen and endures greater loads, making it suitable for demanding drilling tasks. Which three drill types exist? In general drill classification there are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for Steel and similar Materials.
10.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N | 10.9 mm | Short | Bright Finished | HSS‑G | 135° | DIN 338 The Twist Drill Type N short version is a precision metal‑drilling tool designed for Drilling Machine use, offering high stability and fast penetration in hard materials. Short design for improved stability HSS‑G grind for precise, clean holes 135° point angle for harder metals Fully ground shank for high concentricity Faster, more stable drilling for metalwork The short Twist Drill construction reduces overhang and vibration, resulting in higher stability and greater control when working with tough metals. The reduced protruding length is particularly beneficial for precision holes, because it lowers the risk of deflection and improves concentricity. Users thus experience more consistent hole quality and can rely on repeatable results in demanding machining tasks. Material and geometry that cut performance time Manufactured from HSS‑G (ground high‑speed steel) with a 135° point angle, this Type N drill is optimised for hard and alloyed steels. The ground flute geometry creates very sharp cutting edges and excellent runout accuracy, which contributes directly to the described benefit of up to 40% faster drilling and requiring 50% less feed force versus conventional HSS drills. This makes the tool efficient where time and tool life matter. Built for professional machines and heavy duty applications Conforming to DIN 338, the Short Type N is intended for stationary and mobile machine tools used in metalworking. The fully ground shank improves clamping precision in chucks, reducing wobble and improving tool life. For workshops and industrial settings where reliable, repeatable performance is required, this design minimises rework and enhances throughput. Practical guidance and compatibility The short geometry and Type N spiral are especially suitable for drilling in alloyed and unalloyed steel, cast steels, cast iron and hard plastics. For best results, use appropriate coolant on harder materials and secure the workpiece to avoid movement. The combination of a short overall length and ground finish also makes regrinding easier, while reminding users that ground HSS drills can be more brittle and benefit from careful handling. Choose MetavCUT’s precision HSS‑G Short Twist Drill for demanding metal applications — for expert advice or to confirm suitability contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Specifications Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 45109-FDA Type: Type N Diameter: 10.9 mm Point Angle: 135° Execution: Short Colour: Bright finished Material: HSS‑G Standard: DIN 338 Total Length: 142 mm Spiral Length: 94 mm Shank Finish: Fully ground For Drilling Machine: Hand Drill / Drilling Machine Model Series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high‑strength materials and larger hole diameters; its short, ground geometry is easy to regrind and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? Common categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for steel and similar materials. Why are Twist Drills pointed? A pointed tip reduces the chisel edge width at the drill tip, lowering friction and required feed force; the pointed geometry of the MetavCUT Twist Drill also improves centring and reduces walking at the start of the hole. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; the MetavCUT Type N will cut wood but may show reduced guidance and a less clean hole. At which drilling depths is the Twist Drill most used? Twist Drills are commonly used for through‑hole drilling; for diameters up to about 20 mm and depths up to 100 mm a Twist Drill is the most frequently applied tool in metalworking. What is better, HSS or HSSE? HSSE is not automatically superior to HSS in every case; when choosing between HSS and HSSE you should consider the exact working conditions to determine whether the higher cost of HSSE is justified.
10mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Short HSS Twist Drill, 10 mm, 118°, Type N, black, DIN 338 (MetavCUT) The Twist Drill is a short HSS Type N drill for Drilling Machine use, designed for precise metal drilling in demanding workshop and industrial applications. Short design for high stability HSS material for durable metal drilling 118° point angle for reliable centring Conforms to DIN 338 for short twist drills Robust HSS construction for reliable metal machining The HSS material offers a balanced combination of hardness and toughness that makes this Twist Drill suitable for a wide range of Metal tasks. Manufactured according to the expectations for High Speed Steel, the solid material ensures wear resistance and retains cutting performance under typical workshop conditions. This results in dependable hole quality and consistent tool life when used in appropriate Drilling Machine setups. The short design further reduces vibration and supports repeatable results. Short geometry that maximises precision and reduces deflection With a Spiral Length of 87 mm and an Overall Length of 133 mm, the compact geometry of this short Twist Drill minimises overhang and bending. Reduced cantilever improves concentricity and leads to cleaner, more accurate holes, especially when drilling to moderate depths in Steel, Cast Iron or Non-Ferrous Metals. The cylindrical shank and shortened flute length provide increased rigidity, which benefits both stationary machining centres and portable Drilling Machine operations where tool control is essential. Type N spiral and 118° point angle tuned for metalwork As a Type N normal spiral Twist Drill, this tool is optimised for Metal drilling tasks rather than very soft materials; the flute geometry evacuates chips efficiently during through-holes. The 118° point angle supports reliable centring and progressive penetration across many common Metal grades; for very hard stainless steels a different point geometry may be preferred. Compliance with DIN 338 confirms that this short Twist Drill meets established dimensional and form standards for short cylindrical-shank drills intended for metal machining. Who benefits and where to apply it Workshops, maintenance technicians and machinists who require a robust, stable solution for precision holes will find this short HSS Twist Drill particularly useful. It is suited for applications such as component fabrication, repair work and general metalworking where tool rigidity and repeatable hole quality matter. For tasks involving very fine-diameter drilling or specialised materials, consult technical guidance to select the optimal geometry and coating for your project. We recommend the MetavCUT Twist Drill Type N for precise metal drilling; for personalised technical advice or to confirm suitability for specific materials, contact METAV Werkzeuge for expert support — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 40100-FDA Diameter: 10 mm Point angle: 118° Material: HSS Type: Type N Execution: short Spiral length: 87 mm Overall length: 133 mm Colour: black For: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill (Type N) by MetavCUT suitable for? The Twist Drill (Type N) from MetavCUT is designed primarily for Metal drilling, including alloyed and unalloyed Steel, Cast Iron and many Non-Ferrous Metals; it also performs on some Plastics when used with appropriate feeds and speeds. How does the short design of the MetavCUT Twist Drill improve drilling results? A short Twist Drill reduces overhang and bending, which increases rigidity and concentricity during drilling; this delivers cleaner holes and better repeatability when working in workshop conditions with a Drilling Machine. What is a Twist Drill used for? It is mainly applied to the machining of high-strength materials and larger hole diameters. This form is easy to grind and withstands higher loads. Which three drill types exist? Metal drill. Wood drill. Stone/Concrete drill. Why are Twist Drills point-ground? Point-grinding reduces the cross-cut at the tip of the Twist Drill. By point-grinding, friction forces are significantly lowered and smaller feed forces are required. At the same time, the tip of the drill is better centred in the workpiece. Can a Twist Drill be used to drill wood? A Metal drill can be used in Wood, but guidance and finish are poorer. Metal drills are easier to resharpen and have lower self-feed tendency, so the result is generally less clean than with a dedicated Wood drill. For which drilling depths is the Twist Drill most commonly used? Solid drilling is typically executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are inherently superior to standard HSS steels is incorrect. Decision-makers should carefully weigh whether the working conditions justify the higher purchase cost of HSSE.
10mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Das Spiralbohrer von MetavCUT bietet mit seiner HSS-E-Legierung, der geschliffenen Schaftausführung und dem 135° Spitzenwinkel eine zuverlässige Kombination aus Stabilität und Bohrleistung für Stahl und Gusseisen; die kurze Ausführung reduziert Ausschlag und erhöht die Präzision bei stationärer und handgeführter Anwendung. Bei Fragen zur Anwendung oder Detaildaten steht die Beratung von Metav gern zur Verfügung. Spiralbohrer HSS-E Kurzbohrer von MetavCUT Der Spiralbohrer ist ein kurz ausgeführter HSS-E Metallbohrer für präzise Bohrungen in legierten und unlegierten Stahl sowie Gusseisen Kurzspiralbohrer nach DIN 338 HSS-E kobaltlegiert für mehr Verschleißfestigkeit Geschliffene Schaftausführung für präzisen Rundlauf 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Präzise Ergebnisse durch kurze Ausführung und Stabilität Die kurze Ausführung reduziert die Auskraglänge und sorgt so für spürbar geringere Vibrationen und bessere Bohrgenauigkeit. Für Anwender, die enge Toleranzen verlangen, bedeutet das: weniger Wandern beim Anbohren und sauberere Bohrbildqualität. Durch die Kombination aus HSS-E-Werkstoff und der geschliffenen Fertigung werden präzise Zentrierung und hohe Rundlaufgenauigkeit unterstützt, was die Nacharbeit und Schlichtungsraten verringert. Material und Fertigungsweise als Leistungsmerkmal Hergestellt aus HSS-E (kobaltlegiert) verbindet der Bohrer Zähigkeit mit Temperaturbeständigkeit, was bei Bohrprozessen in Stahl und Gusseisen die Standzeit erhöht. Die geschliffene Ausführung liefert scharfe Schneidenkanten und eine definierte Spanform, wodurch sich das Werkzeug besonders für saubere Bohrlöcher in harten Werkstoffen eignet. Ein 135° Spitzenwinkel verkürzt die Anbohrzeit in zähen Materialien und reduziert das Auslaufen beim Durchbruch. Einsatzgebiet und Werkzeugkompatibilität Der Kurzspiralbohrer ist für den Gebrauch an Handbohrmaschinen sowie an stationären Säulenbohrmaschinen ausgelegt und erfüllt die Vorgaben der DIN 338 für kurze Spiralbohrer mit Zylinderschaft. In Werkstatt und Montage empfiehlt sich die Kombination mit Anpunkten vor Bohren bei hohen Präzisionsanforderungen. Für alltägliche Metallbearbeitung liefert dieses Werkzeug eine verlässliche Leistung ohne aufwändige Prozessanpassungen. Anwendungshinweise und Pflege für längere Lebensdauer Beim Bohren in harten Werkstoffen empfiehlt sich Kühlung und moderater Vorschub, um Überhitzung und vorzeitigen Verschleiß zu vermeiden. Zur Reduzierung des Bruchrisikos besonders bei kleinen Durchmessern ist die Verwendung der kurzgehaltenen Ausführung vorteilhaft. Nach jedem Einsatz empfiehlt sich Entfernen von Spänen und eine leichte Korrosionsschutzschicht, um die Standzeit des HSS-E-Werkzeugs zu optimieren. Für präzise Metallbohrungen empfiehlt MetavCUT den HSS-E Kurzbohrer — Bestellungen und Fachberatung direkt über Metav: info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 47100-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Fakten Durchmesser: 10 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-E (kobaltlegiert) Schaftausführung: geschliffen Typ: Typ N (Normalspirale) Ausführung: kurz Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich dieser Bohrer am besten? Der MetavCUT Spiralbohrer in HSS-E eignet sich besonders für legierten und unlegierten Stahl sowie Gusseisen; durch die kobaltlegierte Legierung erhöht sich die Hitze- und Verschleißbeständigkeit, wodurch saubere Bohrungen in harten Werkstoffen erreicht werden. Ist der Bohrer für Handgebrauch oder nur für stationäre Maschinen geeignet? Dieser Kurzbohrer ist für den Einsatz an Handbohrmaschine und an stationären Maschinen konzipiert; die kurze Ausführung verbessert die Stabilität bei Handbetrieb, sodass typische Werkstattanwendungen sicher bedient werden können. Welchen Vorteil bietet die geschliffene Schaftausführung? Die geschliffene Schaftausführung sorgt für hohe Rundlaufgenauigkeit und scharfe Schneidenkanten; das reduziert Vibrationen und liefert präzisere Bohrlöcher, insbesondere bei metallischen Werkstoffen. Warum ist ein 135° Spitzenwinkel vorteilhaft? Ein 135° Spitzenwinkel erleichtert das Anbohren von harten Werkstoffen und vermindert das Auslaufen beim Durchbruch; das führt zu saubereren Ergebnissen in Materialien wie Edelstahl oder gehärtetem Stahl.
10mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G Metal Drill, Ø 10 mm, 135° Tip, Bright Finished, Fully Ground, DIN 1869 (MetavCUT Standard Line) The Twist Drill by MetavCUT is an extra long metal drilling bit designed for deep and hard‑to‑access holes in alloyed and unalloyed steels when used with a drilling machine. Extra long design for deep holes HSS‑G material for precise metal drilling 135° tip angle for harder materials Fully ground shank for high runout accuracy Conforms to DIN 1869 for reliable performance Reach deeper holes with steady guidance The Extra Long overall length of 265 mm and a spiral length of 185 mm allow confident drilling into deep workpieces where standard lengths fall short. This design reduces the need for extensions and improves access in assemblies or when the chuck is positioned far from the work zone. For operations that require penetration beyond typical depths, the extended geometry combines reach with stable chip evacuation, keeping the Drilling Machine feed consistent and lowering the risk of breakage during long runs. Cleaner, faster cuts in metal thanks to HSS‑G grinding Manufactured from HSS‑G and produced with CNC grinding, the bit delivers sharp cutting edges and excellent concentricity. The ground geometry supports up to 40% faster drilling and requires 50% less axial force compared with conventional rolled HSS types, which translates into reduced operator effort and shorter cycle times on repetitive metal tasks. The result is precise holes in materials such as alloyed and unalloyed steel, cast iron and non‑ferrous metals, with superior surface quality and dimensional consistency. Better entry and control for tough materials A 135° tip angle improves centring and reduces walking when starting holes in harder substrates like stainless steel. The larger tip angle shortens penetration time and, when paired with the ground point, minimises friction at the cutting edges. For best results, apply appropriate cutting fluid and controlled feed rates; cooling and lubrication both extend tool life and maintain the sharpness that the ground geometry provides. Recommended use, handling and target applications This Standard Line bit is optimised for metalworking applications and is intended for use with a Drilling Machine under controlled conditions. The fully ground flutes afford very good chip formation and ejection, but ground HSS can be more brittle than rolled designs; therefore, stationary or well‑supported setups with steady coolant flow are advised for deep or interrupted cuts. The product suits professionals and workshops that require reliable deep‑hole performance and high hole quality in demanding materials. Acquire the MetavCUT Standard Line Twist Drill for dependable deep metal drilling — METAV Werkzeuge provides expert technical advice and personal support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Data for confident specification Bezeichnung: Twist Drill Marke: MetavCUT SKU: 32100-FDA Durchmesser: 10 mm Spitzenwinkel: 135° Gesamtlänge: 265 mm Spirallänge: 185 mm Ausführung: extra long Schaft Ausführung: fully ground Farbe/Oberfläche: bright finished Material: HSS‑G Norm: DIN 1869 Modellserie: Standard Line Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills typically used for? The MetavCUT Twist Drill is primarily applied for machining high‑strength materials and for larger diameter or deep hole drilling. Its geometry is well suited to demanding metalworking tasks, and the ground form allows precise holes and reliable performance under higher loads. Which three drill types exist? Common categories are Metal Drills, Wood Drills and Masonry/Concrete Drills; the MetavCUT Twist Drill belongs to the metal drill group and is engineered for steels, castings and similar hard materials. Why are Twist Drills sharpened (pointed)? The sharpening reduces the cross‑cut at the tip, which lowers friction and the required feed force while improving centring in the workpiece. The MetavCUT Twist Drill’s ground point therefore aids smoother starts and more accurate hole positioning. Can a metal Twist Drill be used for wood? A metal Twist Drill such as the MetavCUT Standard Line can be used in wood, but guidance and finish will be inferior compared with dedicated wood bits. Metal drills are easier to resharpen and exhibit less self‑feeding, which may be desirable in some manual applications.
10mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — MetavCUT Extra Long HSS-G Twist Drill (Ø 10 mm, 135° tip, Bright Finished, Fully Ground, DIN 1869) The Twist Drill from MetavCUT is an extra-long HSS-G drill designed for deep, precise metal drilling in hand and machine applications. Extra-long design for deep-hole drilling 10 mm diameter for accurate hole sizing 135° tip for hard material entry Fully Ground shank for high concentricity HSS-G material according to DIN 1869 for tough jobs Robust HSS-G construction for faster, cleaner drilling Deriving from a High-Speed Steel (HSS-G) production process, this extra-long twist drill offers notably improved cutting behaviour. Tests and manufacturer data indicate up to 40% faster drilling and about 50% less thrust compared with conventional HSS bits, which reduces operator fatigue and tool wear. The HSS-G material provides sharp cutting edges and consistent performance when used with appropriate speeds and cooling, making the bit especially suited to alloyed and unalloyed steels. Extra reach and deep-hole capability for difficult tasks With a Spiral Length of 235 mm and a Total Length of 340 mm, the extra-long geometry enables drilling where standard lengths cannot reach. The DIN 1869 specification denotes a deep-hole spiral, meaning the flute geometry is optimised to evacuate chips during extended cuts and to maintain stability in deeper bores. This design is particularly beneficial when access is limited or when long, straight holes are required without abandoning concentricity. Precise tip geometry and shank finish for demanding materials A 135° tip angle is chosen to reduce walking and to facilitate entry into harder materials such as stainless steel; the blunter tip shortens breakthrough time on tough alloys. The fully ground shank and flute geometry (CNC grinding rather than rolled formation) ensure exceptional roundness and hole quality. Users should note that ground HSS bits can be more brittle than rolled equivalents; therefore, stationary drilling with coolant and moderate cutting speeds is recommended for best results. Targeted applications and operator guidance This MetavCUT twist drill is developed for professional use on metal, including cast iron, sintered iron, tempered castings, non-ferrous metals and hard plastics. The bit is compatible with hand drills and drilling machines, but optimal performance is achieved on stable setups with appropriate clamping and cooling. For cleaner holes and longer tool life, use steady feed, appropriate cutting fluid and moderate RPMs tailored to the workpiece material. Strong recommendation: choose the MetavCUT Twist Drill for precision deep-hole metalworking — for further technical guidance or to confirm suitability for specific tasks contact METAV Werkzeuge for expert advice by eMail at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 33100-FDA Diameter: 10 mm Tip angle: 135° Execution: Extra long Colour: Bright Finished Spiral Length: 235 mm Total Length: 340 mm Shank finish: Fully Ground Material: HSS-G Standard: DIN 1869 Application: Drills for metal Series: Standard Line Suitable for: Hand Drill / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill is primarily used for metalworking; it is applied especially when machining alloyed and unalloyed steels, cast iron and non-ferrous metals. The extra-long HSS-G design permits deeper holes and improved chip evacuation, making the bit well suited to professional deep-hole drilling tasks. Which three drill types are commonly distinguished? Three common drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metal applications, while wood drills and stone/concrete drills use different geometries and materials for their respective substrates.
10mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — 10 mm · 135° · Extra Long · HSS‑G · DIN 1869 · Bright Finished · Fully Ground Shank (Drill for Metal) by MetavCUT The Twist Drill is an extra‑long HSS‑G metal drilling bit designed for deep, precise holes in demanding machining applications with a 10 mm diameter and 135° tip angle. Extra‑long design for deep drilling 135° tip for hard materials and better centering HSS‑G ground geometry for faster drilling Fully ground shank for high concentricity DIN 1869 compliant for industrial reliability Engineered for deep, precise metal drilling with confidence The Twist Drill from MetavCUT offers an extra long overall length of 430 mm with a spiral length of 295 mm, specifically intended for deep hole operations where reach and stability matter. The combination of HSS‑G material and a fully ground shank yields high roundness accuracy and clean hole surfaces, which reduces rework and improves assembly tolerances. Designed for use in a Drilling Machine, this long‑reach bit maintains rigidity despite its length, making it suitable for workshop and production environments that require repeatable, centered holes. Faster cutting and lower operator effort through ground geometry Thanks to the CNC ground geometry of the HSS‑G blank, this Twist Drill can achieve up to 40% faster cutting while requiring approximately 50% less thrust compared with conventional rolled HSS drills. The 135° tip angle is optimized for harder materials such as stainless steel and alloyed steels, reducing initial burr formation and shortening pilot times. Grinding the flutes produces very sharp cutting edges and a precise helix, which improves chip evacuation and lowers the risk of chatter when used with appropriate machine settings and coolant. Best applications, handling tips and material guidance This extra‑long Twist Drill is primarily intended for Drilling for Metal: alloyed and unalloyed steel, cast iron, sintered materials, and non‑ferrous metals, as well as technical plastics where a robust bit is required. For deep hole work, use steady support and consistent coolant flow to dissipate heat and avoid premature wear or fracturing; ground HSS drills are sharper but can be less ductile than rolled equivalents, so stationary setups and controlled feeds are recommended. The geometry and DIN 1869 specification make the bit particularly effective for through and deep blind holes up to practical limits determined by machine rigidity. Precision advantages and what makes this drill stand out MetavCUT’s Standard Line Twist Drill distinguishes itself by pairing bright finished surfaces with a geschliffen / fully ground flute profile, resulting in excellent runout performance and reliable centering, especially in demanding metalworking tasks. The design reduces the tendency for the tip to wander on entry, and when combined with the correct pilot technique and coolant, delivers consistent hole quality that supports downstream processes such as thread tapping and press fits. Strong recommendation: For demanding deep‑hole metalworking tasks, the MetavCUT Twist Drill (10 mm, extra long, HSS‑G, 135°) is highly recommended — for expert selection, technical advice or to confirm suitability for specific materials and machines, contact METAV Werkzeuge: info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271 Technical specifications for planning and procurement Bezeichnung: Twist Drill Marke: MetavCUT SKU: 34100-FDA Durchmesser: 10 mm Spitzenwinkel: 135° Ausführung: extra long Gesamtlänge: 430 mm Spirallänge: 295 mm Material: HSS‑G Schaft Ausführung: fully ground Farbe: bright finished Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Modellserie: Standard Line Norm: DIN 1869 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill (Drill for Metal) is mainly used for machining high‑strength materials and larger diameters where deep holes are required; its extra‑long design and HSS‑G construction make it suitable for alloyed and unalloyed steels, cast irons and hard plastics under machine and coolant support. Can the MetavCUT Twist Drill be used in a handheld drill? While the Twist Drill is designed for use in a Drilling Machine for optimal stability, it can be used in powerful handheld machines for certain tasks; however, for safety and the best results with an extra‑long HSS‑G bit, a stationary machine and coolant are recommended. For what is a Twist Drill used? A Twist Drill is primarily applied when working on high‑strength materials and larger drill diameters. Its shape allows easy resharpening and it withstands higher loads; this makes the bit suitable for deep holes and demanding metalworking tasks. Which three drill types exist? Typical categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills resharpened at the tip? Resharpening reduces the cross‑edge at the drill tip, lowering friction so smaller feed forces are needed; this improves centering and reduces required thrust for the Twist Drill. Can a Twist Drill be used for wood? A metal Twist Drill can be used in wood but will usually offer poorer guidance and a rougher finish; it is easier to resharpen and shows less self‑feed than dedicated wood drills. For which drilling depths is the Twist Drill most used? A solid hole is commonly made with a Twist Drill. For diameters up to 20 mm and drill depths up to about 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to HSS is not universally correct; consider the working conditions carefully to determine whether the higher cost of HSSE is justified.
10mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, 10 mm, HSS‑G, bright finished The Twist Drill Type N short by MetavCUT is a precision metalworking drill bit designed for use in a Drilling Machine or hand drill for stable, accurate holes in hard materials. Short Twist Drill Type N, 10 mm diameter HSS‑G fully ground for precise metal holes 135° point angle for harder materials Complies with DIN 338 for short drills Bright finished shank, suitable for hand drills High cutting performance thanks to HSS‑G and CNC grinding The HSS‑G material and fully ground geometry deliver significantly improved cutting action compared with rolled drills. This short, ground design enables up to 40% faster drilling while requiring around 50% less feed force, which reduces operator fatigue and tool wear. Such performance makes the bit particularly effective when machining alloyed and unalloyed Steel, Cast Iron and other metal substrates where clean, accurate holes are required. The reduced thrust also means less stress on smaller machines and fixtures. Stability and precision from a shorter overhang A short overall length increases rigidity and lowers the tendency to bend, producing more concentric holes under load. The 135° point angle is optimised for harder materials, shortening penetration time and improving centring in stainless and tempered steels. Conformity to DIN 338 confirms that this short twist drill meets the standard dimensions and tolerances expected for short cylindrical‑shank High Speed Steel drills, making it easy to integrate into established machining workflows. Tailored for metalworking professionals and maintenance teams Manufactured for workshop use, the MetavCUT short Twist Drill Type N is aimed at machinists, toolrooms and professional maintenance staff who need dependable results in metal. The fully ground flute geometry yields sharp cutting edges and high running accuracy, which benefits precision work on lathes, drill presses and portable drills. Regrinding is straightforward for in‑house toolrooms, though users should mind that ground drills can be more brittle and are best used with appropriate cooling and machine support. Clear advantages and practical guidance for use The Type N normal spiral is a classic metalworking geometry: good chip evacuation and robust cutting for a wide range of ferrous and non‑ferrous metals. Because the drill is ground rather than roll‑formed, it produces cleaner holes and higher concentricity; the trade‑off is a greater sensitivity to shock loads, so the bit performs best in stable, cooled drilling conditions. For deeper bores or flexible setups, consider longer or different spiral profiles; for standard metal‑through holes up to typical diameters, this short design is often the faster, more precise choice. We recommend the MetavCUT short HSS‑G Twist Drill Type N for precision metalworking — METAV Werkzeuge offers expert consultation and technical support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 45100-FDA Diameter: 10 mm Spiral length: 87 mm Overall length: 133 mm Point angle: 135° Type: Type N Execution: short Shank execution: fully ground Finish / Colour: bright finished Material: HSS-G Standard: DIN 338 Application: Drills for metal Model series: Standard Line For Drilling Machine: Handbohrmaschine / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N short is primarily applied to the machining of high‑strength materials and larger drill diameters; its ground geometry is easy to regrind and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types are there? In general drill categories are Metal drills, Wood drills and Stone/concrete drills; the MetavCUT Twist Drill Type N short belongs to the metal drill category and is optimised for ferrous and non‑ferrous metals.
10mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Der kurze Spiralbohrer verbindet hohe Stabilität, eine verschleißarme TiN-Beschichtung und den geschliffenen HSS-G-Schliff zu einer präzisen Lösung beim Bohren in harten Werkstoffen; profitieren Sie von schnellerem Vorschub und geringerer Anpresskraft bei Metallarbeiten. Bestellen Sie den Bohrer direkt über Metav oder kontaktieren Sie unsere Beratung bei Bedarf. Spiralbohrer HSS-G kurz 10 mm (MetavCUT, SKU 46100-FDA) Der Spiralbohrer in kurzer Ausführung für präzise Metallbearbeitung auf stationären und handgeführten Maschinen HSS-G geschliffen für scharfe Schneiden und präzise Bohrungen TiN-beschichtet für geringeren Verschleiß und längere Standzeit Kurze Ausführung für höhere Stabilität und weniger Ausschlag 135° Spitzenwinkel ideal für harte Werkstoffe Geeignet für Stahl, Gusseisen und NE-Metalle Haltbarkeit und Schnittgeschwindigkeit für effektive Fertigung Die Kombination aus HSS-G und TiN-Beschichtung sorgt für deutlich reduzierte Reibung und verlängerte Standzeit. Durch den CNC-geschliffenen Schaft entstehen sehr scharfe Schneidkanten, die saubere Bohrlöcher liefern. Anwender profitieren von bis zu 40 % schnellerem Bohren und 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten, was Bearbeitungszeiten und Ermüdung beim Arbeiten reduziert. Die Beschichtung minimiert thermische Belastung, sofern eine geeignete Kühlung eingesetzt wird. Präzision und Stabilität bei harten Werkstoffen Die kurze Ausführung reduziert die Auskraglänge und damit das Biegemoment; dies führt zu höherer Rundlaufgenauigkeit und weniger Kippneigung beim Einstechen in Material. Der 135° Spitzenwinkel unterstützt das Anbohren harter Werkstoffe und verkürzt die Anbohrphase. Die geschliffene Geometrie (HSS-G) gewährleistet saubere Spanabfuhr und präzise Führungswirkung, besonders bei legiertem und unlegiertem Stahl sowie Temperguss. Zielgerichtete Anwendungen und Anwendernutzen Entwickelt für Werkstatt, Industrie und Profi-Handwerker, eignet sich der Bohrer für das Bohren in legiertem Stahl, Gusseisen, Sintereisen, Kupfer, Bronze, Neusilber und Hartkunststoff. Die Ausführung erlaubt sowohl den Einsatz auf stationären Werkzeugmaschinen als auch auf leistungsfähigen Handbohrmaschinen, wobei die kurze Bauform besonders bei anspruchsvollen Passungsbohrungen und engen Bauraumvorgaben punkten kann. Praxistipps für Leistung und Lebensdauer Optimale Ergebnisse werden mit geeigneter Kühlschmierstoffzufuhr erzielt, die Wärmeentwicklung reduziert und Spanverbackungen verhindert. Für hohe Präzision vorzentrieren oder anpunkten, um ein Wandern des Bohrers zu vermeiden. Bei sehr harten Werkstoffen empfiehlt sich die Nutzung des 135° Spitzenwinkels und angepasste Schnittdaten; bei stationärem Einsatz liefert die geschliffene Geometrie höchste Genauigkeit. Ersatz und Nachschärfung sind bei diesem Typ eher auf stationäre Anwendungen auszurichten. Für präzise Metallbohrungen empfehlen wir den Einsatz des MetavCUT Standard Line Spiralbohrer; bei Fragen oder für Bestellungen wenden Sie sich direkt an Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 46100-FDA Bezeichnung: Spiralbohrer Marke: MetavCUT Modellserie: Standard Line Typ: Typ N Norm: DIN 338 Fakten Durchmesser: 10 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (geschliffen, CNC-Schliff) Schaftausführung: geschliffen Farbe: TiN-beschichtet (Titan-Nitrid) Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Hersteller: MetavCUT Geeignet für: legierter Stahl, unlegierter Stahl, Gusseisen, Temperguss, Neusilber, Kupfer, Bronze, Hartkunststoff FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der MetavCUT Spiralbohrer (Typ N, SKU 46100-FDA) mit 135° Spitzenwinkel kann für gehärtete oder zähe Edelstähle eingesetzt werden, sofern geeignete Schnittwerte und Kühlung verwendet werden; für sehr harte, gehärtete Stähle empfiehlt sich eine speziell gehärtete Sorte. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT in kurzer Ausführung ist für Handbohrmaschinen geeignet, wobei stabile Spannaufnahme und angepasste Drehzahl die besten Ergebnisse liefern. Wie wirkt sich die TiN-Beschichtung auf die Standzeit aus? Die TiN-Beschichtung des MetavCUT Spiralbohrers reduziert die Reibung und erhöht die Verschleißfestigkeit, was die Standzeit im Vergleich zu unbeschichteten HSS-Werkzeugen deutlich verlängern kann. Was bedeutet HSS-G geschliffen konkret für die Anwendung? HSS-G weist einen geschliffenen Spanwinkel auf, was sehr scharfe Schneiden, hohe Rundlaufgenauigkeit und saubere Bohrbilder ermöglicht; die geschliffene Ausführung ist besonders für präzise Metallbearbeitung geeignet. Wann ist die kurze Ausführung gegenüber längeren Bohrern zu bevorzugen? Die kurze Ausführung des MetavCUT Spiralbohrers bietet höhere Stabilität und weniger Ausschlag und ist daher die bessere Wahl bei präzisen Bohrungen, engen Bauraumverhältnissen und beim Arbeiten in harten Werkstoffen.
10mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Spiralbohrer 10 mm von MetavCUT — lange Ausführung (HSS-G) Der Spiralbohrer 10 mm in langer Ausführung ist für tiefe Metallbohrungen konzipiert und eignet sich für Werkstatt, Montage und Handbohrmaschine sowie stationäre Maschinen. Spiralbohrer 10 mm, HSS-G, lange Ausführung DIN 340: längere Spirallänge für tiefe Bohrungen Geschliffener Schaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe Verpackungseinheit 5 für Vorrat in der Werkstatt Präzise Schneidleistung bei harten Werkstoffen Der geschliffene HSS-G-Werkstoff bietet eine hohe Schnittschärfe und ermöglicht ein deutlich schnelleres Eindringen in Metall bei reduziertem Anpressdruck. Dank CNC-Schliff entstehen scharfe Kanten und eine verbesserte Rundlaufgenauigkeit, was saubere Bohrlöcher in legiertem und unlegiertem Stahl, Gussstahl und Hartkunststoff begünstigt. Diese Leistungsmerkmale führen zu weniger Nacharbeit und konstanteren Passungen im Fertigungsprozess. Tiefer Bohren und bessere Zugänglichkeit Die lange Ausführung nach DIN 340 mit erhöhter Spirallänge erlaubt Bohrungen in Bereichen mit eingeschränkter Zugänglichkeit und das Erreichen größerer Tiefen, ohne sofortige Aufbohrung. Durch die längere Spirallänge werden Späne weiter aus dem Bohrloch transportiert, wodurch die Effizienz bei tieferen Bohrungen steigt. Bei sehr tiefen Löchern empfiehlt sich zusätzlich die Kühlung und gelegentliche Spanabfuhr, um die Standzeit zu maximieren. Praxisgerecht für Werkstatt und Montage Auch bei Handgeführten Maschinen bleibt die Anwendung unkompliziert: Der Bohrer ist für den Alltagsgebrauch in Werkstatt und Montage ausgelegt und passt zu typischen Handbohrmaschinen, wobei die längere Ausführung Stabilität und Reichweite bietet. Durch die reduzierte Anpresskraft verringert sich die Ermüdung des Anwenders, während die Durchsatzleistung steigt. Für stationäre Anwendungen profitieren Anwender zudem von gleichmäßigeren Bohrbildern. Anwendungshinweise für lange Lebensdauer Der Spitzenwinkel 135° erleichtert das Anbohren harter Werkstoffe und reduziert den Wandereffekt beim Einstechen. Um die Bruchgefahr geschliffener Werkzeuge zu minimieren, sind moderate Schnittparameter, ausreichende Kühlung und bei Bedarf Vorbohrungen empfehlenswert. Bei Bohrtiefen, die das Mehrfache des Durchmessers überschreiten, kann eine mehrstufige Vorgehensweise die Spanabfuhr verbessern und die Standzeit erhöhen. Mit dem MetavCUT HSS-G Spiralbohrer die Bohrprozesse in Werkstatt und Produktion gezielt verbessern - bei Rückfragen oder für technische Details erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produkteigenschaften Artikelnummer: 53100-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 340 Daten Durchmesser: 10 mm Gesamtlänge: 184 mm Spirallänge: 121 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (geschliffen, hohe Schnittschärfe) Schaftausführung: geschliffen (CNC-Schliff für Präzision) Ausführung: lang (DIN 340, längere Spirallänge für tiefe Bohrungen) Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Ist der Bohrer für Edelstahl geeignet? Der Spiralbohrer 10 mm von MetavCUT (HSS-G, SKU 53100-FDA) eignet sich für härtere Werkstoffe; der 135° Spitzenwinkel verbessert das Anbohrverhalten bei rostfreiem Stahl, empfiehlt sich aber mit geeigneter Kühlung. Kann die lange Ausführung in einer Handbohrmaschine genutzt werden? Ja, die lange Ausführung der MetavCUT Spiralbohrer ist für Handbohrmaschine geeignet, bietet jedoch bei sehr tiefen Bohrungen oder harten Materialien Vorteile bei stationärer Nutzung und Kühlung. Wie tief kann man mit dem Bohrer sicher bohren? Die erhöhte Spirallänge von 121 mm ermöglicht tiefere Bohrungen als Standardausführungen; für extreme Tiefen sollten Spanabfuhr und Kühlung überwacht sowie gegebenenfalls Vorbohrungen eingesetzt werden. Sind die Bohrer einzeln nutzbar oder nur im Satz? Die MetavCUT Spiralbohrer werden in der angegebenen Verpackungseinheit geliefert; die Einheit von 5 erlaubt Vorrat und Austausch im laufenden Betrieb, einzelne Werkstücke können separat eingesetzt werden. Welche Vorteile bietet der geschliffene Schaft? Geschliffene Schäfte und Spiralen sorgen bei diesen HSS-G Bohrern für hohe Rundlaufgenauigkeit und saubere Bohrbilder, was insbesondere bei Passungsbohrungen Qualität und Maßhaltigkeit verbessert.
Reliable performance for daily drilling
The Standard line is a versatile series of HSS (high-speed steel) twist drills, also described as standard twist drills or precision HSS twist drills, engineered for everyday industrial and workshop use. Positioned between economy options and specialist pro-grade tools, the standard line delivers consistent, repeatable results for regular drilling tasks without the need for high-cost alloys.
How the standard line performs in practice
Designed as precision ground (HSS‑G) twist drills, the standard line combines a refined manufacture process with a classic geometry. A typical 118° tip and a cleanly formed point give good penetration and reliable centring, while extremely smooth flute surfaces support efficient chip evacuation. The result is stable running, improved hole quality and extended tool life under normal production and maintenance conditions.
Key advantages that matter on the shop floor
- Reduced rework thanks to high concentricity and precise hole quality
- Lower tool consumption through enhanced wear resistance from precision grinding
- Faster cycle times via efficient chip removal from smooth flutes
- Broad applicability across common materials: steel, cast iron, sintered metal, plastics and non‑ferrous metals
- Ideal balance of performance and cost for workshops, maintenance teams and assembly lines
Technical data
- Material: HSS (high-speed steel)
- Manufacture: precision ground (HSS-G)
- Tip angle: 118° (typical)
- Features: smooth flutes, optimised point geometry, excellent concentricity
- Applications: unalloyed steel, low-alloy steel, cast iron, sintered metal, plastics, non‑ferrous metals
Why Metav is the smart sourcing choice
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of technical know-how with a broad assortment, making high-quality measuring and workshop tools accessible to small and large operations alike. With over 48,000 customers, more than 250,000 products and a logistics hub in Emmerich, Metav offers dependable supply and a curated quality filter for the european market — the sensible route to equip your shop with standard line twist drills and complementary tooling.
FAQ
What materials are standard line twist drills suitable for?
The standard line twist drills are suitable for unalloyed and low‑alloy steel, cast iron, sintered metal, plastics and non‑ferrous metals, matching typical workshop and light industrial requirements.
How does the precision ground (HSS‑G) design benefit drilling results?
Precision ground manufacture increases concentricity and improves cutting edge finish, which leads to better hole quality, reduced vibration and longer tool life compared with roll‑formed entry‑level drills.
Are standard line drills a substitute for pro‑grade specialist drills?
Standard line drills are intended as the reliable everyday option; they deliver consistent performance for regular production and maintenance but are not a replacement when extreme loads or specialised alloys demand pro‑grade materials.
Which synonyms should procurement teams use when searching for these tools?
Search terms such as “standard twist drills”, “HSS standard drills” or “precision HSS twist drills” will reliably lead to the standard line and comparable products.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com