Reliable drilling performance with Standard Line twist drill
Standard Line twist drill and standard drills deliver consistent, precision holemaking for daily industrial and workshop use, combining durable high-speed steel construction with precision-ground flutes to ensure excellent runout and chip evacuation. Designed for machining unalloyed and low-alloy steel, cast iron, sintered metal, plastics and non-ferrous metals, these drills provide a balanced mix of wear resistance and hole quality for routine production and maintenance tasks. Ideal for workshops, maintenance departments and assembly plants, the system offers a dependable, cost-effective solution between entry-level and heavy-duty ranges, featuring an optimised 118° point for good penetration and centring. Key advantages include precision-ground construction, excellent chip evacuation and consistent hole quality.
8.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 8.8 mm, 118°, black, DIN 338 The Twist Drill is a short Type N HSS drill designed for precise metal drilling in workshop and industrial settings. Short HSS Type N for high stability 8.8 mm Diameter for precise metal holes 118° Point Angle for improved centring DIN 338 short design reduces bending Black finish for clear visibility in the chuck Short design that boosts stability and accuracy A short design according to DIN 338 reduces the unsupported length of the tool, which directly improves rigidity and lowers the risk of bending during drilling. This construction leads to more precise holes and longer tool life when working on metal parts. For tasks requiring tight tolerances, the compact geometry is particularly advantageous because it minimises vibration and preserves concentricity even under handheld or machine-fed conditions. High-speed steel core for reliable cutting performance Manufactured from HSS (High Speed Steel), the drill offers a balanced combination of toughness and heat resistance suitable for common metalworking tasks. HSS is easy to re-sharpen and maintains cutting performance on alloyed and unalloyed steels, cast iron, non-ferrous metals and many plastics. This material choice reduces the likelihood of breakage in smaller diameters and supports repeated sharpening during maintenance, making it a durable option for everyday workshop use. Optimised tip geometry for centring and chip evacuation The 118° point angle and classic Type N helix create a reliable starting behaviour on flat and slightly curved surfaces, improving initial centring without excessive walking. The standard flute geometry facilitates efficient chip removal while drilling through metal, which helps maintain cutting edges and reduces heat build-up. These features together make the drill particularly well suited to metalworking tasks that demand a clean entry and consistent hole quality. Designed for compatibility and straightforward handling With a diameter of 8.8 mm, a spiral length of 81 mm and a total length of 125 mm, this short HSS drill is compatible with a wide range of drilling machines and hand-held drills used in workshops. The Type N helix is the classic choice for metal drilling and pairs well with standard chucks. The black finish aids visibility in the chuck and protects surfaces during storage. Handling is simplified by the reduced overhang, which also contributes to safer operation and easier regrinding when required. Strong recommendation: For consistent results in metalworking choose the MetavCUT short HSS Twist Drill — technical advice and fitting support are available from METAV Werkzeuge; for personalised guidance email info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Key specifications for reliable workshop use Designation: Twist Drill Brand: MetavCUT SKU: 40088-FDA Type: Type N Diameter: 8.8 mm Point Angle: 118° Material: HSS (High Speed Steel) Execution: short Colour: black Spiral Length: 81 mm Total Length: 125 mm Application: Drills for metal Recommended machine: Drilling Machine / Hand Drill compatible Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the typical use of the Twist Drill from MetavCUT (Type N)? The MetavCUT Twist Drill Type N is primarily used for drilling in high-strength materials and for larger hole diameters in metals; its robust roll-rolled HSS construction makes it suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics, while offering good resistance to breakage and straightforward re-sharpening. Which three drill types are commonly available? Common drill categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for steel and similar materials. Why are Twist Drills dressed (pointed)? Dressing the tip reduces the cross-cut at the peak of the Twist Drill, which significantly lowers friction so that less feed force is required; at the same time the dressed tip improves centring and reduces walking when starting the hole. Can the MetavCUT Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with a dedicated wood bit; the metal drill offers easier re-sharpening and less aggressive self-feeding, which may affect hole cleanliness. For which drilling depths is the Twist Drill most commonly used? The Twist Drill is typically used for through drilling where a cylindrical hole is produced by material removal; it is most common for diameters up to 20 mm and drilling depths up to around 100 mm, depending on the machine and setup. Is HSS better than HSSE? The general belief that HSSE steels are categorically superior to HSS is not always correct; the choice between HSS and HSSE should depend on actual working conditions, as HSSE may justify its higher cost only under specific demands.
8.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short HSS‑E, 8.8 mm, 135° Point Angle, 5% cobalt‑alloyed, DIN 338, Fully Ground A Twist Drill (Type N, short) designed for precision metal drilling with improved stiffness and suitability for hard materials. Short Design for higher drilling stability HSS‑E Material with 5% Cobalt for wear resistance 135° Point Angle for hard and stainless steels Fully Ground shank for excellent runout accuracy Conforms to DIN 338 for short twist drills Higher stability for precise metal drilling The short execution provides a Short Design that reduces the cantilever length and significantly lowers deflection during operation. This means the bit delivers straighter holes and improved positional accuracy when used in a Drilling Machine or bench setup. For precision work in metal, reduced vibration translates into fewer rejects and faster downstream operations. Durable HSS‑E composition for tough applications Made from HSS‑E with 5% Cobalt, the drill retains hardness at elevated temperatures and resists wear when cutting alloyed steels. Cobalt‑alloyed high‑speed steel improves tool life and allows more aggressive cutting parameters on harder materials. This blend is advantageous when drilling stainless steel or other demanding metals where conventional HSS would wear prematurely. Geometry optimised for hard materials and centering A 135° Point Angle and Type N normal spiral geometry favour slower entry but superior centring and lower axial forces in hard materials. The geometry reduces chipping at the tip and helps maintain hole quality in thicker or tougher workpieces. For users unfamiliar: the point angle controls penetration and centring, with 135° commonly chosen for steels and stainless applications. Fully ground shank and conformity to DIN 338 The bit is Fully Ground, meaning the flutes and geometry are created by CNC grinding rather than rolling, resulting in sharper cutting edges and high concentricity. The product conforms to DIN 338 for short twist drills, ensuring consistent dimensions and interchangeability with standard toolholders. Users benefit from predictable fit and performance in professional shop environments. Intended applications and recommended use This short Type N twist drill is primarily specified for Drilling for Metal and is suitable for alloyed and unalloyed steel, cast iron, Non‑Ferrous Metals and Plastics under appropriate speeds and lubrication. Its shorter overall length increases stability for handheld or stationary machining. For best results, use cutting fluid and moderate spindle speeds; cooling reduces heat build‑up and extends tool life. Choose MetavCUT short twist drills for demanding metalwork and contact METAV Werkzeuge for personalised technical advice via eMail: info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications for accurate selection Twist Drill Brand: MetavCUT SKU: 47088-FDA Type: Typ N / Type N Diameter: 8.8 mm Overall Length: 125 mm Spiral Length: 81 mm Point Angle: 135° Execution: short Shaft Execution: fully ground Material: HSS‑E Composition: 5% cobalt‑alloyed For Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Standard: DIN 338 Colour: 5% cobalt‑alloyed Manufacturer: MetavCUT Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is mainly applied to the machining of high‑strength materials and larger drill diameters; its short form is easier to regrind and withstands greater loads, making it suitable for demanding metalwork where tool robustness and reusability are important. Which three drill types exist? Regarding drill families, common categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill group and is optimised for metalworking applications.
8.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G, Ø 8.8 mm, 135°, Type N, Bright Finished, DIN 338 A short Twist Drill Type N for Drilling Machine use, designed for precise metal drilling in demanding industrial and workshop applications. Short design for higher drilling stability HSS-G ground geometry for clean, precise holes 135° tip for hard and stainless materials Fully ground shank for excellent concentricity Conforms to DIN 338 for reliable interchangeability Faster, more reliable metal drilling for tough materials The short HSS-G construction delivers a direct benefit: significantly reduced tendency to bend or whip during use, which translates into more precise holes and longer tool life under proper conditions. The 135° tip angle is optimised for harder metals and stainless steels, shortening the pilot time and improving centring on difficult surfaces. As a Type N normal-spiral geometry, this design balances chip evacuation and cutting action for typical metalworking tasks while allowing stable performance on stationary and mobile machines. Stability and handling that improve machining results A reduced overhang and the shortened overall length mean less vibration and better runout behaviour on the spindle; this yields cleaner hole edges and reduces rework. The fully ground shank guarantees improved concentricity in the chuck, so tolerances remain tight even during series production. With a diameter of 8.8 mm, a spiral length of 81 mm and an overall length of 125 mm, the tool is tailored for tasks where a compact, rigid drill bit is required to maintain accuracy in metals such as alloyed and unalloyed steels, cast steel and non-ferrous metals. Who benefits and how to choose the right drill Workshop professionals, toolmakers and maintenance technicians gain most from a short, ground HSS tool when precision and repeatability matter. The combination of HSS-G material and the short format reduces the required feed force and can increase drilling speed in appropriate conditions. For applications involving Sintereisen or Temperguss, the recommended approach is to use cutting fluid and moderate cutting parameters to exploit the drill’s performance without risking premature wear. Understanding the key specifications and safe use DIN 338 classifies short twist drills with cylindrical shank made from high-speed steel; in this case the designation indicates a ground geometry (HSS-G), produced by grinding rather than rolling. Ground drills typically achieve sharper cutting edges and higher runout precision, but they require careful handling because they can be more brittle than rolled variants. For best results, use appropriate coolant, clamp the tool securely, and keep overhangs minimal. These measures reduce heat and extend service life while ensuring consistent hole quality. Sustainability, service and after-sales support MetavCUT manufactures this short twist drill to industrial standards and METAV Werkzeuge as the vendor provides comprehensive technical consultation. If there is any uncertainty about material suitability, machining parameters, or alternative tool geometries, METAV Werkzeuge offers expert guidance and tailored recommendations to match specific workshop requirements. For precision metalworking choose the MetavCUT short HSS-G Twist Drill Type N for improved stability and hole quality — METAV Werkzeuge provides professional consultation at info@metav-werkzeuge.com or +49 2822 7131930 and via WhatsApp at +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 45088-FDA Type: Typ N Diameter: 8.8 mm Spiral length: 81 mm Overall length: 125 mm Point angle: 135° Material: HSS-G (ground high-speed steel) Finish / Colour: Bright finished Shank execution: Fully ground Execution: Short Standard: DIN 338 For use in: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suited to? The MetavCUT Twist Drill Type N is primarily used for metalworking; it is especially suitable for alloyed and unalloyed steel, cast steel, gusseisen and other hard materials. Its short, ground HSS construction provides improved stability and cleaner holes when used with appropriate machine settings and coolant. How does the short format of this Twist Drill affect drilling performance? A short design reduces the overhang and increases stiffness, which lowers vibration and improves concentricity. For the MetavCUT short Twist Drill this means better hole quality and the ability to operate at higher effective cutting speeds with lower feed force compared to longer equivalents. For what is a Twist Drill mainly used? A Twist Drill is mainly applied in the machining of high-strength workpieces and larger drill diameters. Its geometry is relatively easy to regrind and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three primary drill categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills pointed? Pointing reduces the cross-edge at the tip of the Twist Drill, which significantly lowers friction and thus requires less feed force. At the same time the pointed geometry improves centring in the workpiece for more accurate drilling. Can a Twist Drill be used to drill wood? A metal Twist Drill such as the MetavCUT HSS-G can be used in wood, but it offers poorer guidance and a less clean finish than a dedicated wood drill. It is easier to resharpen and has less self-feeding tendency than specialised wood drills. For which drilling depths is the Twist Drill the most used tool? Solid drilling is commonly performed with Twist Drills. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE steels are inherently superior to standard HSS is not universally correct. The decision should be based on the specific working conditions and whether the performance benefits justify the higher acquisition cost.
8.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS Ø 8.9 mm, 118° tip, black, DIN 338, short design The Twist Drill Type N short HSS is a metalworking bit designed for precise drilling in metals with hand drills and drilling machines, offering a stable short shank and a 118° tip for efficient penetration. Short design for increased stability HSS construction for reliable metal drilling 118° tip for easier penetration in softer metals DIN 338 standard for short twist drills Compatible with hand drills and drilling machines Precision and stability for demanding metalwork The short Type N geometry delivers high stability and reduced run-out during operation, which directly benefits hole accuracy. With a Ø 8.9 mm cutting diameter and a total length of 125 mm, this short twist drill minimises bending and chatter when used in both portable and benchtop drilling equipment. The compact spiral length of 81 mm concentrates rigidity where it matters, enabling consistent hole diameter and a cleaner finish even under higher cutting loads. Durable HSS material for extended tool life Made from HSS (High Speed Steel), the bit combines hardness and toughness for prolonged service life in a wide range of metals. The material choice supports drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, while still allowing straightforward resharpening when required. For users this means fewer tool changes, predictable wear behaviour and reliable performance in routine workshop and maintenance tasks. Practical use cases and who benefits most Designed for professional workshops, maintenance teams and skilled hobbyists, the MetavCUT short twist drill is ideal where precision and repeatability are required. The Type N spiral is optimised for metallic materials, and the black finish improves visibility during setup. If you are unsure whether the bit suits a specific machine or material, METAV Werkzeuge offers detailed advice and technical support — contact via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Standards, tip geometry and application guidance Conforming to DIN 338 as a short twist drill ensures consistent dimensions and manufacturing quality across batches. The 118° tip angle favours entry and centring in softer metals and related tasks, while the classic Type N flute geometry balances chip evacuation and cutting action. For harder stainless steels or very abrasive materials, consider a flatter tip angle or a coated variant; for standard steel work, this short HSS bit provides an effective combination of penetration and rigidity. Strong recommendation: Opt for the MetavCUT Twist Drill Type N short HSS for precise metal drilling — expert consultation and ordering support are available from METAV Werkzeuge at info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40089-FDA Diameter: 8.9 mm Tip angle: 118° Spiral length: 81 mm Total length: 125 mm Type: Type N Material: HSS Execution: short Colour: black Suitable for: Drilling Machine / Hand drills Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill are primarily used for machining high-strength materials and larger drill diameters; their form is easy to resharpen and they withstand considerable loads, making them suitable for demanding metalworking tasks. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills group and is designed accordingly. Why are twist drills tipped? The tip sharpening reduces the cross-cut at the drill point, which lowers friction and therefore reduces the required feed force; this also improves centring of the MetavCUT Twist Drill during the initial entry into the workpiece. Can a Twist Drill be used to drill wood? A metal drill like the MetavCUT Twist Drill can be used in wood, but guidance and finish are usually inferior compared with a dedicated wood bit; metal drills are easier to resharpen and show less self-feed, which can be an advantage in some manual operations.
8.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 8.9 mm, 135° point, short HSS‑E, 5% cobalt‑alloyed, fully ground shank, DIN 338, MetavCUT The Twist Drill is a short Type N drill designed for precision metalworking, offering high stability and improved penetration for harder materials thanks to its 135° point angle. Short design for improved stability 8.9 mm Diameter for common metal holes 135° Point Angle for harder materials HSS‑E with 5% cobalt for heat resistance Fully ground shank for high runout accuracy Precision and stability for metalworking that matters This short, purpose‑built cutter delivers stability where long overhangs would cause deflection. The reduced overall length and shorter projection reduce bending and vibration during drilling, which directly improves hole accuracy and prolongs tool life. For workshop operations and portable drilling machines, this geometry supports fast, straight entries into Steel and other metals, translating to fewer rejected parts and less rework. Durable material for demanding conditions Manufactured from HSS‑E with 5% cobalt, the tool resists heat and wear significantly better than standard HSS. That makes it suitable for sustained drilling in alloyed and unalloyed Steel, Cast Iron and Non‑Ferrous Metals. The cobalt content increases red hardness, so the cutter maintains cutting edges at higher temperatures; the direct user benefit is longer service life and fewer tool changes when machining tougher materials. Geometry optimised for harder workpieces The 135° point angle is chosen to ease engagement with harder materials and to reduce chatter on difficult surfaces. A wider point angle shortens the initial entry time and decreases the tendency of the tip to wander, which is particularly helpful on stainless Steel and high‑strength alloys. The "Type N" normal helix fluting provides a balance between chip evacuation and cutting stability for metalworking tasks. Ground flute finish and norm conformity for precise holes Being fully ground (HSS‑G style) yields sharp cutting lips and very good concentricity, resulting in clean, burr‑reduced holes with excellent surface finish. Conformance to DIN 338 ensures consistent dimensions and interchangeability, which benefits production runs and tool inventories. For users who value repeatable quality, this specification simplifies planning and tool management in professional shops. Intended use and target users Designed for machinists, maintenance teams and metalworking professionals, this short twist drill excels where precision counts and materials are tough. It suits both stationary machines and hand‑held drilling machines where a compact, stiff tool is needed. The result is reliable performance in fabrication, repair, and assembly environments where reproducible hole quality reduces secondary operations. We recommend MetavCUT’s precision HSS‑E short twist drill for demanding metal applications; for personalised technical advice or if you are unsure this tool meets your requirements, contact METAV Werkzeuge for competent consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 47089-FDA Diameter: 8.9 mm Total length: 125 mm Spiral length: 81 mm Point angle: 135° Type: Type N Execution: Short Colour: 5% cobalt‑alloyed Shank execution: Fully ground Material: HSS‑E Standard: DIN 338 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its short form and robust design make it particularly suitable for precise drilling in Steel and other metals. This form is easy to re‑grind and withstands higher loads, which supports longer life under demanding conditions. Which 3 drill types exist? When considering the MetavCUT Twist Drill (Type N), the three main drill categories to know are Metal drills, Wood drills, and Stone/Concrete drills. Each category is optimised for different materials and geometry, so selecting the correct drill type ensures better results and tool life.
8.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Short Type N 8.9 mm | 135° | HSS-G | Bright Finished | DIN 338 The Twist Drill Short Type N is a precision metalworking drill for Drilling Machines, designed for stable and accurate machining of hard materials. Short design for higher stability 135° point angle for hard materials HSS‑G fully ground for precise holes Complies with DIN 338 for short drills Suitable for use in Drilling Machine applications Durable HSS‑G construction for reliable machining Equipped with HSS‑G material, this Twist Drill delivers consistent cutting performance when working with alloyed and unalloyed steels. The fully ground geometry produces sharp cutting edges and high concentricity, which results in clean, burr‑reduced holes and extended tool life under correct cooling. Because the flute geometry is produced by CNC grinding rather than rolling, users benefit from superior roundness and repeatable accuracy that is particularly useful in demanding metalworking environments. Short overall length for enhanced stability and accuracy Thanks to its Short Design, the drill offers reduced overhang from the chuck, lowering the tendency to deflect and improving concentricity when drilling in tougher materials. This results in higher feed control and better hole quality, especially on bench and floor Drilling Machines. When precision counts, the shorter projection enables operators to apply lower lateral forces and maintain tighter tolerances, making the tool ideal for repetitive, high‑precision metalworking tasks. Optimised geometry for hard materials and faster drilling With a 135° Point Angle, the Twist Drill penetrates harder workpieces such as stainless steel more efficiently than standard angles, reducing the initial skidding and improving centring. The ground cutting lips and polished flutes support faster chip evacuation and allow up to 40% quicker drilling rates under suitable conditions, while requiring significantly lower feed force compared with conventional HSS drills. This geometry is particularly effective for applications where reduced entry burr and consistent hole form are priorities. Conformance, application and user guidance Manufactured to DIN 338, this Short Twist Drill Type N is specified for metalworking tasks on rotating stationary or portable machines. It is intended primarily for drilling metallic materials including cast iron, sintered iron, non‑ferrous metals and hard plastics, and is not optimised for very soft timbers. For best results, use appropriate cutting speed, steady coolant supply and a stable clamping setup to exploit the drill’s high concentricity and edge sharpness. Strong recommendation: Choose MetavCUT Twist Drill for demanding metal drilling tasks and contact METAV Werkzeuge for expert technical support and ordering assistance — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Marke: MetavCUT SKU: 45089-FDA Diameter: 8.9 mm Overall Length: 125 mm Spiral Length: 81 mm Point Angle: 135° Type: Type N Execution: short Shank Execution: fully ground Material: HSS-G Standard: DIN 338 Colour: bright finished For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Standard Line Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Short Type N best used for? The MetavCUT Twist Drill Short Type N is primarily used for machining metal; it excels in drilling alloyed and unalloyed steel, cast materials and harder plastics thanks to its robust HSS‑G construction and shortened geometry that improves stability. Can the MetavCUT Twist Drill be used in a hand drill or only in a Drilling Machine? The Twist Drill is designed for Drilling Machine applications to achieve optimal stability and concentricity, though it may be used in heavy‑duty hand drills with appropriate clamping and reduced projection; for precise industrial tasks a stationary Drilling Machine is recommended. What are Twist Drills used for? Twist Drills are mainly applied in the machining of high‑strength materials and large drill diameters; their grindable form allows straightforward re‑sharpening and they withstand greater loads, making them suitable for demanding metalwork. Which three drill types exist? The common drill types are Metal Drill, Wood Drill and Stone/Concrete Drill. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip, significantly lowering friction; by re‑pointing the tip the required feed force decreases and the drill centres better in the workpiece. Can you drill wood with this Twist Drill? A Metal Drill like the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated Wood Drills; however, metal drills are easier to re‑sharpen and show less self‑pulling action. For which depths is the Twist Drill most used? Twist Drills are the standard tool for through drilling; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm. Is HSS or HSSE better? The assumption that HSSE is always superior to HSS is incorrect; selection should depend on working conditions and whether the higher cost of HSSE is justified by specific application demands.
8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der Spiralbohrer in HSS überzeugt durch die Kombination aus hoher Stabilität durch die kurze Ausführung und der Normkonformität nach DIN 338, was präzise Metallbohrungen erlaubt. Nutzen Sie die robuste Geometrie mit einem Spitzenwinkel von 118° und der für Handbohrmaschine geeigneten Zylinderschaft. Bestellungen und fachliche Beratung erhalten Sie direkt über Metav Werkzeuge oder per Technische Beratung anfordern. Spiralbohrer 8 mm (HSS, kurz) von MetavCUT Der Spiralbohrer 8 mm ist ein kurzer HSS-Bohrer nach DIN 338 für präzises Bohren in Metall an Handbohrmaschine und stationären Maschinen. HSS-Schnellarbeitsstahl für Stahl und Metall Normgerechte Ausführung nach DIN 338 Kurze Bauform für hohe Stabilität Spitzenwinkel 118° für universelle Anwendung Zylinderschaft für Handbohrmaschine Hohe Stabilität für präzise Metallbearbeitung Die kurze Ausführung des Bohrers reduziert die Auskraglänge und sorgt so für erhöhte Stabilität bei Kraftübertragung und Führung. Durch die Verwendung von HSS bleibt die Schneide zäh und widerstandsfähig gegen thermische Belastung, was besonders bei Serien von mittelgroßen Bohrungen im Werkstattalltag von Vorteil ist. Diese Konstruktion vermindert Schwingungen und reduziert damit das Risiko von Werkzeugbruch sowie das Entstehen von Unrundheiten. Passende Anwendungen und Maschinenkompatibilität Der Durchmesser von 8 mm fällt in den Bereich für allgemeine Werkstatt- und Montagearbeiten und eignet sich deshalb besonders für dünne bis mittlere Bleche, Profile sowie Baustahl, Aluminium und Kunststoffe. Einsatz an Handbohrmaschine und stationären Säulenbohrmaschinen ist möglich, wobei bei hochpräzisen Passungen ein Anpunkten mit Zentrierbohrer empfohlen wird. Der Typ N Normalspirale ist speziell auf Metall zugeschnitten und bietet zuverlässige Spanabfuhr bei üblichen Vorschubwerten. Bohrgeometrie, Spitzenwinkel und Bedienhinweise Der Spitzenwinkel 118° ermöglicht ein ausgewogenes Eindringverhalten und gute Zentrierfähigkeit auf flachen und leicht gewölbten Oberflächen; für sehr harte Werkstoffe wäre ein größerer Winkel vorteilhaft. Die Spirallänge 75 mm und die Gesamtlänge 117 mm bieten ausreichend Spanraum für saubere Spanabfuhr. Zur Verlängerung der Standzeit empfiehlt sich passende Kühlschmierstoffzufuhr und abgestimmte Schnittdaten sowie bei Bedarf das Vorbohren zur Entlastung der Querschneide. Qualität, Norm und Eignung für den Werkstattalltag Die Fertigung nach DIN 338 garantiert die standardisierte Abmessung und Ausführung kurzer Spiralbohrer mit Zylinderschaft, was die Austauschbarkeit und Lagerhaltung erleichtert. Die Ausführung in HSS und die Typisierung als Typ N sichern die Vielseitigkeit im Einsatzfeld Metall. MetavCUT steht für zuverlässige Werkzeuge, und Metav Werkzeuge bietet transparente Versorgung sowie technische Beratung aus Emmerich für Anwender in Industrie und Handwerk. Empfehlung: Für belastbare und präzise Metallbohrungen das MetavCUT HSS-Kurzspiralbohrer-Programm wählen; Bestellungen und technische Rückfragen gern über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 40080-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Fakten Durchmesser: 8 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Material: HSS Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz Typ: Typ N Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer (Spiralbohrer, Typ N, SKU 40080-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe und ist damit eine vielseitige Wahl für Werkstatt und Montage. Ist der Bohrer für den Einsatz in einer Handbohrmaschine geeignet? Ja, der Spiralbohrer von MetavCUT ist wegen der kurzen Ausführung und dem Zylinderschaft für die Nutzung an Handbohrmaschine freigegeben und bietet dort gute Stabilität. Welchen Spitzenwinkel hat der Bohrer und was bedeutet das für die Anwendung? Der Spitzenwinkel beträgt 118°, was universelle Einsatzmöglichkeiten fördert und besonders bei Aluminium und allgemeinen Metallarbeiten für gutes Eindringverhalten sorgt. Wie lang sind Spirale und Bohrer insgesamt? Die Spirallänge beträgt 75 mm, die Gesamtlänge 117 mm; diese Dimensionen gewährleisten ausreichende Spanabfuhr bei mitteltiefen Bohrungen. Wie viele Bohrer sind in einer Verpackungseinheit enthalten? Die Verpackungseinheit umfasst 5 Stück des MetavCUT Spiralbohrers mit der SKU 40080-FDA.
8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Spiralbohrer) — Type N short · 8 mm · 135° · HSS‑E · DIN 338 · 5% cobalt‑alloyed · Fully Ground — MetavCUT The Twist Drill Type N short 8 mm is a precision metal‑drilling bit for use in a Drilling Machine, designed for stable, accurate holes in hard materials. Short design for improved stability and precision 8 mm HSS‑E geometry for hard and alloyed steels 135° point angle for reduced walking in stainless steel Fully ground shaft for high concentricity and clean holes Manufactured to DIN 338 for metal machining reliability Precise material and cutting performance for demanding metalwork This short Twist Drill is made from HSS‑E (High Speed Steel with cobalt) and features a 5% cobalt‑alloyed composition that increases hot hardness and wear resistance. The shorter overall length reduces cantilever action, which directly improves stability and reduces the risk of deflection during machining. For operators who require consistent hole quality in tough materials, the cobalt‑enriched steel provides longer tool life under elevated temperatures compared with standard HSS. Designed for stable, accurate drilling in hard materials The Type N geometry with a 135° point angle is optimised for harder substrates such as stainless steel and alloyed steels; the flatter point decreases the tendency to dig in and shortens the initial plunge time. Because the bit is fully ground, it delivers excellent runout accuracy and very sharp cutting edges, resulting in cleaner holes with minimal burr formation. These characteristics are particularly valuable for precision work on components where hole accuracy matters. Practical advantages and typical uses in workshops Short twist drills to DIN 338 are especially suited to bench and machine drilling operations where rigidity is available—examples include drilling in alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The reduced overhang makes setup easier and safer on both stationary and portable drilling equipment. Users benefit from fewer broken tools when observing recommended feeds, speeds and adequate cooling, particularly for diameters below 6 mm; for the 8 mm size here, appropriate cooling extends life and improves surface finish. Recommendations for machining and tool handling When using this short, fully ground twist drill, clamp the workpiece securely and use a Drilling Machine with proper alignment. Start with a centre or pilot mark when high positional accuracy is required and apply cutting fluid for prolonged tool life when machining stainless or high‑strength alloys. The rolling or grinding manufacturing method affects regrindability: fully ground bits offer superb initial sharpness and repeatable geometry, but they can be more brittle—regrind carefully and avoid excessive heat build‑up during sharpening. MetavCUT recommends this short HSS‑E Twist Drill for precision metal applications; for personalised advice or additional technical data contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 — expert consultation is available. Designation: Twist Drill Brand: MetavCUT SKU: 47080-FDA Diameter: 8 mm Spiral Length: 75 mm Overall Length: 117 mm Point Angle: 135° Type: Type N Material: HSS‑E (High Speed Steel with cobalt) Finish / Version: short Shaft Finish: fully ground Colour / Alloy: 5% cobalt‑alloyed For Use In: Drilling Machine Norm: DIN 338 Model Series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking: alloyed and unalloyed steels, cast iron, non‑ferrous metals and certain plastics; the HSS‑E composition and 135° point angle improve performance when machining harder materials. How should I use the MetavCUT Twist Drill Type N to maximise tool life? For best results with the MetavCUT Twist Drill Type N, secure the workpiece, use correct spindle speed and feed for 8 mm HSS‑E, and apply cutting fluid when machining stainless or high‑temperature alloys to reduce wear and avoid overheating. What is a Twist Drill used for? A Twist Drill is mainly applied when machining high‑strength materials and larger diameters; this form is easy to regrind and withstands higher loads. Which three drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills. Why are twist drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, significantly lowering friction so that reduced feed forces are sufficient; it also improves initial centring of the tip in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance is poorer and the hole finish is less clean; however, metal drills are easier to resharpen and show less self‑feeding. At which drilling depths is the twist drill most commonly used? Solid drilling with a twist drill is standard for hole diameters up to about 20 mm and drilling depths up to roughly 100 mm; it is the most frequently used tool for these ranges. Is HSS or HSSE better? The common belief that HSSE is always superior to HSS is incorrect; you should assess whether working conditions justify the higher cost of HSSE for your specific application.
8mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G Drill (Ø 8 mm, 135° Tip, Bright Finished, Fully Ground Shank, DIN 1869) A Twist Drill designed for deep metal drilling in Drilling Machines, offering an extra long length and a 135° tip for reliable penetration. Ø 8 mm for precise hole diameters Extra Long design for deep or hard‑to‑reach holes HSS‑G material for high wear resistance 135° tip angle for harder materials Fully Ground shank for high runout accuracy Exceptional deep‑hole performance for demanding metalwork This extra long HSS‑G Twist Drill is engineered to reach depths that standard drills cannot. The extended overall length and increased spiral length allow clean chip evacuation during deep drilling, reducing the need to retract frequently. As a result, the tool achieves efficient progress in tasks such as structural steel or thick plate drilling, where depth and steady feed are crucial. The DIN 1869 compliance guarantees suitable geometry for deeper holes under challenging conditions. Faster cutting with lower feed forces thanks to precision grinding A fully ground geometry and CNC‑refined flutes give the bit a sharp profile that cuts more efficiently. The ground design enables up to 40% faster drilling and requires significantly less axial force compared with rolled HSS bits, which is particularly beneficial for handheld or smaller drilling machines where operator control matters. The 135° Tip improves centring and reduces walking on hard substrates, helping to produce cleaner bores with less rework. Robust material choice and targeted applications Made from HSS‑G, this Twist Drill is suited for alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron, non‑ferrous metals and hard plastics. The material selection balances hardness and toughness for high performance in metalworking. For stationary drilling with coolant and controlled feeds the bit excels; note that ground drills can be more brittle, so proper clamping and cooling extend tool life and maintain hole quality. Designed for accuracy and machine compatibility The bright finished surface and fully ground shank ensure consistent clamping and minimal runout, supporting precise machining outcomes. The geometry tailored by the DIN 1869 standard promotes repeatable centring and stability in common Drilling Machines. Users seeking clean, concentric holes with reduced radial deviation will benefit from the bit's tight manufacturing tolerances and sharp cutting edges. Strongly recommended: Choose the MetavCUT Twist Drill for deep metal drilling and contact METAV Werkzeuge for expert technical advice — Email info@metav‑werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 32080‑FDA Diameter: 8 mm Tip Angle: 135° Execution / Type: Extra Long Colour / Finish: Bright Finished Shank Execution: Fully Ground Material: HSS‑G Standard: DIN 1869 Spiral Length: 165 mm Overall Length: 240 mm Application: Drills for metal For Machine Type: Drilling Machine Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for The MetavCUT Twist Drill is intended primarily for metals such as alloyed and unalloyed steel, cast steel and grey cast iron; it is also usable in non‑ferrous metals and hard plastics, delivering accurate holes when used with appropriate coolant and feed rates. How should the MetavCUT Twist Drill be used to maximise tool life For best results with the MetavCUT Twist Drill, use steady feeds, adequate clamping and cutting fluid for heat removal; the ground HSS‑G geometry cuts efficiently but benefits from controlled machining conditions to avoid chipping. For what is a Twist Drill used A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. This form is easy to regrind and withstands higher loads while enabling deep, precise holes under demanding conditions. Which three drill types exist There are three main drill types: Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills pointed Pointing reduces the cross‑cut at the tip. By re‑pointing, friction forces are significantly lowered so that less feed force is required and the tip centres more reliably in the workpiece. Can a Twist Drill be used for wood A metal Twist Drill can be used in wood but offers poorer guidance and a less clean finish; however, these drills are easier to regrind and have less aggressive self‑feeding than specialised wood bits. At which depths is the Twist Drill most used A through hole in solid material is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool.
8mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — 8 mm, 135° Point Angle, Extra Long, Bright Finished, HSS-G (DIN 1869) by MetavCUT The Twist Drill is an extra long Twist Drill designed for deep metal drilling with a 135° point angle for use in Drilling Machines. 8 mm Diameter for precise metal drilling Extra-Long Design for deep or hard-to-reach holes 135° Point Angle for harder materials HSS-G Fully Ground for fast, accurate cuts DIN 1869 Standard for deep-hole drilling reliability Drill Deeper with Consistent Precision The Twist Drill Extra-Long construction provides an extended Overall Length of 305 mm and a Spiral Length of 210 mm, enabling reliable Deep Drilling where standard tools fall short. This geometry is especially useful when access is limited or when holes must be made from a greater distance; the Longer Reach reduces the need for extensions and preserves alignment. The 8 mm Diameter maintains good rigidity while allowing fine control, so each hole stays true and Repeatable even at depth. Built for Hard Materials and Stable Entry Equipped with a 135° Point Angle, this Twist Drill penetrates harder materials with reduced walking and improved centring. The HSS-G Material and CNC grinding process create very sharp cutting edges and high Roundness Accuracy, producing clean bore surfaces in alloyed and unalloyed Steel, Cast Steel, Grey Cast Iron and Non-Ferrous Metals. Note that the ground geometry offers excellent precision but requires appropriate coolant and often stationary or guided use to avoid brittle breakage. Faster Drilling with Lower Feed Forces The Fully Ground flute geometry of this Drill allows up to 40% faster drilling and can require up to 50% less feed force compared with conventional rolled HSS designs. This reduction in Thrust improves operator comfort and extends tool life under the right conditions. Conforming to DIN 1869, the deep-spiral form supports effective chip evacuation during long bores and reduces the risk of chip packing that can stall the cut. Reliable Choice for Workshop and Production Use Designed for use in Hand Drills and Drilling Machines, the MetavCUT Extra-Long Twist Drill suits workshop environments and stationary machines where repeatability and reach matter. Professionals who machine thicker components or require access past fixtures will value the combination of Precision and Reach. The Standard Line modelling focuses on robust everyday performance and predictable results in series or single-part production. MetavCUT recommends this Twist Drill for demanding deep-hole metalworking tasks — for expert advice and to verify suitability for your application, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33080-FDA Diameter: 8 mm Point Angle: 135° Type / Execution: Extra Long Colour / Finish: Bright Finished Shank Execution: Fully Ground Material: HSS-G Standard: DIN 1869 Overall Length: 305 mm Spiral Length: 210 mm For Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill is primarily applied for machining high-strength materials and larger bore diameters; it performs well in alloyed and unalloyed Steel, Cast Steel and Non-Ferrous Metals. Its ground spiral geometry is easy to regrind and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? In general tool classification you will find Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drill group and is optimised for metalworking applications. Why are Twist Drills pointed? The pointing reduces the cross-cut at the tip of the Twist Drill, significantly lowering friction and therefore the required feed force; this sharpening also improves centring of the tip in the workpiece for a more accurate start. Can a Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with wood-specific bits. Metal Drills are easier to resharpen and have less self-feeding action, so results in Wood are acceptable but not optimal. For which drilling depths is the Twist Drill most commonly used? A full-penetration bore is often executed with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm this type of tool is the most frequently used option for reliable deep-hole drilling. What is better, HSS or HSSE? The common assumption that HSSE steels are universally superior to HSS is not correct. When choosing, evaluate whether the specific work conditions justify the higher cost of HSSE; MetavCUT supplies HSS-G variants that balance performance and economy for many metalworking tasks.
8mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — 8 mm, 135° Tip Angle, Extra Long • Bright Finished • HSS‑G • DIN 1869 The Twist Drill is an extra‑long HSS‑G metal drill for deep, precise holes with a Drilling Machine, optimised for hard materials and demanding shop use. Extra‑long design for deep drilling CNC‑ground HSS‑G for precise, clean holes 135° Tip Angle suited for hard materials Fully ground shank for excellent concentricity Consistent deep-hole performance for demanding metalwork The MetavCUT extra‑long design delivers reliable drilling when access is restricted or when through‑holes must be produced without multiple setups. With a Total Length 390 mm and a Spiral Length 265 mm, this twist drill enables drilling of extended depths while maintaining steady chip evacuation. The elongated geometry reduces the need for extensions or stepped drilling, which saves time in production and lowers fixture complexity. For machinists seeking reproducible deep holes, the geometry is designed to balance stiffness and Reach. Sharp geometry and material for hard, alloyed steels Made from HSS‑G and finished by CNC grinding, the bit combines toughness with cutting precision. The 135° Tip Angle reduces cutting forces in harder materials such as stainless and tempered steels, improving centring and lowering the risk of workpiece deformation. Grinding the Flutes produces a sharp cutting edge and high runout accuracy, which results in cleaner bores and more consistent hole tolerances. For operators less familiar with grind types: CNC grinding means the Flute geometry is cut rather than rolled, giving higher Dimensional Precision at the cost of slightly increased brittleness — therefore cooling and appropriate speeds are recommended. Recommended applications, handling and compatibility This metal drill is intended for drilling in legated and unlegated Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics under workshop conditions. It is optimised for use in a Drilling Machine and benefits from controlled speeds, steady feed and coolant for prolonged life. The Fully Ground Shank improves clamping concentricity in chucks, reducing runout and vibration. As a practical tip: when working deep, ensure adequate Chip Evacuation and periodic pecking or coolant supply to prevent clogging and premature wear. Choose the MetavCUT Twist Drill for demanding deep metal drilling — for technical advice or to check suitability for a specific application contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT Diameter: 8 mm Total Length: 390 mm Spiral Length: 265 mm Tip Angle: 135° Execution: Extra long Colour / Finish: Bright finished Shank: Fully ground Material: HSS‑G Standard: DIN 1869 Application: Drills for metal / for Drilling Machine Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill (metal Twist Drill) is primarily designed for machining high‑strength and alloyed steels and larger bore diameters; its extra‑long design and HSS‑G material make it suitable for deep holes and applications requiring precise hole geometry. Can the MetavCUT Twist Drill be used in a bench or handheld drill? The MetavCUT Twist Drill is optimised for use in a Drilling Machine; it can be used in powerful benchtop machines but, due to its length and ground construction, handheld use is not recommended for safety and accuracy reasons. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and large bore diameters. Its form allows relatively easy regrinding and it endures higher loads, making it suitable for tough metalworking tasks. Which three drill types exist? Common categories are Metal Drill, Wood Drill and Masonry/Concrete Drill. Why are twist drills pointed? Pointing reduces the cross‑edge at the tip of the twist drill. By pointing, friction forces are significantly lowered so reduced feed forces are required, and the tip centres better in the workpiece. Can you drill wood with a metal twist drill? A metal drill can be used in wood, but guidance is poorer and hole quality is inferior. Metal bits are easier to regrind and have less self‑feed, so results may be acceptable for non‑critical wooden applications. At which drilling depths is the twist drill most used? Twist Drills are the standard tool for through holes and are most commonly used up to diameters of about 20 mm and drilling depths up to 100 mm; extra‑long variants extend that capability for deeper bores. Which is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is incorrect. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for the required application.
8mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — Drill Bit, Diameter 8 mm, 118° Tip Angle, HSS‑G, Fully Ground, Silver, DIN 338 The Twist Drill is a precision Drill Bit for metalworking, offering an 8 mm Diameter and a 118° Tip Angle for reliable centring and clean holes in a variety of metals. Ideal for metalworking applications with high precision Fully ground geometry for faster, cleaner drilling Hexagonal shank for secure torque transmission Conforms to DIN 338 for standardised short Twist Drills Suitable for use in Drilling Machines and handheld drills Faster, cleaner holes thanks to fully ground geometry The Twist Drill uses a Fully Ground HSS‑G construction that produces very sharp cutting edges and high runout accuracy. This manufacturing method (CNC grinding) enables up to 40% faster drilling and requires approximately 50% less feed force compared with rolled HSS bits, which translates into less operator fatigue and shorter cycle times. The grounded flute geometry also yields cleaner, more precise holes particularly in alloyed and unalloyed steel and other hard materials. Secure clamping and improved torque transfer with a hexagonal shank A Hexagonal Shank (sechskant) ensures form‑fit torque transmission into Bit Holders and quick‑change chucks, reducing slippage during heavy cutting. The shank design allows direct use in 1/4" bit holders (E6.3) while remaining compatible with standard chucks, which simplifies tool changes and increases workplace efficiency. For mobile setups and cordless drivers, the hex shank provides safer engagement under higher loads. Material choice and geometry tuned for metalworking Made from HSS‑G (high speed steel, ground), the bit offers a balance of hardness and toughness for drilling metals such as steel, cast iron, non‑ferrous metals and certain engineering plastics. The 118° Tip Angle favours easier penetration and better centring in softer metals like aluminium, while the overall bit geometry remains versatile for a wide range of workshop tasks. Note that fully ground HSS can be more brittle than rolled variants; therefore, recommended use is with adequate cooling and in appropriate drilling setups to maximise service life. Practical use cases and handling recommendations Experienced machinists and maintenance technicians will appreciate the combination of DIN 338 conformity and standardised lengths that support repeatable setups on both stationary and portable machines. For best results, use the correct cutting speed for the material and apply coolant when machining harder alloys. The bit is well suited to production tasks and repair work where precision and repeatability are required rather than rough or one‑off woodworking applications. For precision metalworking applications choose the MetavCUT Twist Drill for reliable performance — for expert advice or to confirm suitability contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 57080-FDA Diameter: 8 mm Tip Angle: 118° Material: HSS-G Execution: fully ground Colour: silver For Drilling Machine: Drilling Machine (Handbohrmaschine) Spiral Length: 70 mm Shank: Hexagonal Overall Length: 135 mm Norm: DIN 338 Model Series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill, a precision Drill Bit made from HSS‑G, is intended primarily for metalworking and performs well in alloyed and unalloyed steels, cast iron, non‑ferrous metals and some hard plastics; for the hardest materials, follow recommended speeds and cooling practices. How should the MetavCUT Twist Drill be clamped and operated for best life? Clamping the MetavCUT Twist Drill in a properly sized chuck or a 1/4" bit holder for the Hexagonal Shank ensures secure torque transfer; use correct cutting speeds, steady feed and coolant as needed to reduce wear and avoid brittle failure. What is a Twist Drill used for? A Twist Drill is mainly applied when working on high‑strength materials and larger drill diameters; the ground flute geometry makes it easier to grind and yields precise holes that withstand higher loads. Which three drill types are there? The main drill types are Metal Drills, Wood Drills, and Stone/Concrete Drills. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the chisel edge at the tip, significantly lowering friction and thus the required feed forces, while improving centring of the bit in the workpiece. Can a Metal Drill be used in Wood? A Metal Drill can be used in Wood, but it offers less guidance and a less clean finish compared with dedicated wood bits; however, such drills are easier to resharpen and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A solid bore is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE is always superior to HSS is not universally true; decide based on your specific working conditions to determine whether the higher cost of HSSE is justified.
8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill by MetavCUT — Type N short, Ø 8 mm, 135° point angle, Bright finished, HSS‑G, DIN 338 The Twist Drill Type N short is a compact HSS‑G drill bit designed for precise metalworking tasks in hand and stationary drilling machines. MetavCUT Twist Drill Type N Ø8 mm Short design for greater stability 135° point angle for hard metals HSS‑G fully ground for precise holes DIN 338 compliant for industrial use Faster, more stable drilling in demanding metalwork Dank der short design reduziert dieser Twist Drill das Auskragen aus dem Bohrfutter und minimiert somit Vibrationen und Verbiegen. Die verringerte Auskraglänge führt zu höherer Stability und damit zu gleichmäßigeren, maßhaltigen Bohrlöchern. Als Folge werden Bearbeitungszeiten verkürzt und die Anforderungen an die Werkzeugspannung im Alltag verringert, was besonders bei wiederholten Serienbohrungen spürbare Produktivitätsvorteile liefert. Sharp, ground geometry for clean, precise holes Die HSS‑G Ausführung mit CNC‑geschliffener Spirale sorgt für sehr scharfe Schneidkanten und hohen Rundlauf. Im Vergleich zu gewalzten Bohrern ermöglicht der Schleifprozess sauberere Spanabfuhr und glattere Bohrflächen, was die Nachbearbeitung minimiert. Diese präzise Geometrie ist besonders vorteilhaft beim Bohren in legierte und unlegierte Stähle, Gusswerkstoffe sowie Hartkunststoffe. Engineered for metals and professional workshop use Dieser Twist Drill des Typs Type N ist nach DIN 338 klassifiziert und wurde primär für Metallbearbeitung konzipiert. Er eignet sich für Temperguss, Gusseisen, Sintereisen, Nichteisenmetalle und legierte Stähle. Für Handwerker, Instandhalter und Metallwerkstätten bedeutet das: ein universelles, robustes Werkzeug für den täglichen Einsatz bei stationären oder mobilen Bohrmaschinen. Practical handling tips for longer tool life Beim Einsatz empfiehlt sich Kühlung und angepasste Schnittgeschwindigkeit, um Bruchgefahr bei geschliffenen HSS‑Bohrern zu reduzieren. Die 135° point angle erleichtert das Anbohren harter Werkstoffe, da der Anbohrvorgang verkürzt wird und die Spitze besser zentriert. Kurze Überhänge und ein sauber gespanntes Werkstück minimieren Feed‑Kräfte und erhöhen die Standzeit des Bohrers. Strong recommendation: Choose the MetavCUT short Twist Drill for precise, high‑stability metal drilling — for personal advice and technical support contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 45080-FDA Diameter: 8 mm Overall length: 117 mm Spiral length: 75 mm Point angle: 135° Type: Type N Execution: short Shank: fully ground Material: HSS‑G Surface / Colour: Bright finished Standard: DIN 338 For: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill and for which materials is it suitable? The MetavCUT Twist Drill Type N short is primarily used for drilling in metal; it is designed for high‑strength materials and larger diameters, offering good performance in alloyed and unalloyed steel, cast steel, cast iron and hard plastics. Which three drill types are commonly distinguished? Common drill categories are metal drill bits, wood drill bits and stone/concrete drill bits, with the MetavCUT Twist Drill belonging to the metal drill bit group. Why are twist drills split (point relieved)? The splitting reduces the cross‑cut at the tip, which lowers friction and requires less feed force; additionally, the modified tip improves centring in the workpiece. Can a metal twist drill be used to drill wood? A metal drill bit such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; metal bits are easier to re‑grind and show less self‑pulling. For which drilling depths is a twist drill most commonly used? A through hole in solid material is typically made with a twist drill; for diameters up to 20 mm and drilling depths up to 100 mm, the twist drill is the most frequently used tool. Is HSS or HSSE better for drilling? A general assumption that HSSE steels are always superior to HSS is incorrect; selection should be based on specific working conditions to determine whether the higher price of HSSE is justified.
8mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Die Kombination aus HSS-G Material, TiN-Beschichtung und kurzer Ausführung sorgt für präzise Bohrungen und höhere Standzeit bei Metallbearbeitung. Nutzen Sie die erhöhte Stabilität und die optimierte Schneidgeometrie zur Effizienzsteigerung in der Werkstatt. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT – kurze Ausführung für Metall Spiralbohrer von MetavCUT in kurzer Ausführung eignet sich für präzise Bohrungen in legierten und unlegierten Stahl sowie Guss- und Nichteisenmetallen Spiralbohrer Typ N für Metallbearbeitung HSS-G geschliffen für präzise Bohrungen TiN-Beschichtung reduziert Verschleiß Kurze Ausführung für hohe Stabilität Geeignet für Handbohrmaschine und Werkstatt Robuste Beschichtung und Material für längere Standzeit Aufgrund des HSS-G Werkstoffs in Kombination mit der TiN-Beschichtung wird die Reibung beim Bohren reduziert und die Lebensdauer des Werkzeugs erhöht. Diese Eigenschaft führt zu weniger Werkzeugwechseln und damit zu besserer Auslastung der Maschine und geringeren Betriebskosten. Anwender profitieren insbesondere bei häufigen Bohrzyklen in Stahl und Guss durch gleichbleibende Bohrbildqualität und reduzierte Nacharbeit. Kurze Ausführung für höhere Präzision und Stabilität Die kürzere Gesamtlänge reduziert die Auskraglänge und damit das Risiko von Schwingungen und Durchbiegung während des Bohrens. In Kombination mit der geschliffenen Fertigung nach DIN 338 ergibt sich eine hohe Rundlaufgenauigkeit, die saubere Bohrlöcher ermöglicht. Der 135° Spitzenwinkel unterstützt das Anbohren harter Werkstoffe und verringert das Ausreißen bei Ein- und Austritt. Effiziente Bohrleistung und geringerer Kraftaufwand Durch die geschliffene Geometrie lässt sich das Material schneller schneiden; das Werkzeug ermöglicht laut Herstellerangaben bis zu 40% schnelleres Bohren bei gleichzeitig bis zu 50% weniger Anpresskraft. Das resultiert in kürzeren Durchlaufzeiten und weniger Ermüdung für Bediener. Diese Effizienz zahlt sich bei Serienarbeiten und Instandsetzungen aus, wenn Präzision und Produktionsgeschwindigkeit gefragt sind. Vielseitiger Einsatz und Anwenderempfehlung Für Werkstätten, Montagebetriebe und Handwerk ist diese kurze Ausführung ideal geeignet, wenn stationäre oder handgeführte Maschinen zum Einsatz kommen. Der Bohrer ist besonders für den Standard-Bereich mit 2 mm bis 13 mm Durchmesser ausgelegt und deckt typische Metallarbeiten zuverlässig ab. Anwender mit Bedarf an hoher Präzision und Stabilität erhalten mit diesem Werkzeug eine praxisgerechte Lösung für vielfältige Metallanwendungen. Wählen Sie den MetavCUT Spiralbohrer aus der Standard Line für zuverlässige Metallbohrungen und kontaktieren Sie bei technischen Fragen unser Team per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 für persönliche Beratung Produktmerkmale Artikelnummer: 46080-FDA Hersteller: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Material: HSS-G Farbe: TIN-beschichtet Ausführung: kurz Schaftausführung: geschliffen Typ: Typ N Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 Fakten Durchmesser: 8 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Beschichtung: TIN-beschichtet (Titan-Nitrid, erhöhte Verschleißfestigkeit) Schaftausführung: geschliffen Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale für Metall) Hersteller: MetavCUT Modellserie: Standard Line Ausführung: kurz Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer Standard Line (SKU 46080-FDA) ist ausgelegt für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze und eignet sich ebenfalls für Hartkunststoff. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und die Zylinderschaft machen den MetavCUT Spiralbohrer Standard Line geeignet für den Einsatz in Handbohrmaschine und stationären Maschinen, sofern auf Rundlauf und geeignete Spannaufnahme geachtet wird. Welche Vorteile bringt die TiN-Beschichtung in der Praxis? Die TiN-Beschichtung des MetavCUT Spiralbohrers reduziert Reibung und Verschleiß, was die Standzeit erhöht und die Wärmeentwicklung beim Bohren verringert; das führt zu gleichmäßigeren Bohrungen und weniger Werkzeugwechseln. Welche Bohrparameter werden empfohlen für 8 mm in gehärtetem Stahl? Für den MetavCUT Spiralbohrer mit 8 mm Durchmesser und 135° Spitzenwinkel empfiehlt sich reduzierte Schnittgeschwindigkeit und ausreichende Kühlmittelzufuhr; bei Unsicherheit die Herstellerangaben und Maschinenleistung prüfen. Wie beeinflusst die geschliffene Ausführung die Bohrqualität? Die geschliffene Geometrie des MetavCUT Spiralbohrers (HSS-G) sorgt für scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher und geringere Nacharbeit in der Metallbearbeitung ermöglicht.
8mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G 8 mm, 135° Point, DIN 340, Bright Finished Drill Bit A Twist Drill by MetavCUT is a long HSS‑G 8 mm drill bit for drilling machines, engineered for deep, precise metal bores. Long version for deeper and hard‑to‑reach bores Fully ground shaft for high concentricity and clean holes 135° point angle optimised for harder materials Conforms to DIN 340 for consistent overall length and quality Bright finished surface for corrosion resistance and easy chip evacuation High‑performance geometry for efficient metal drilling The long HSS‑G design combines extended reach with a ground spiral that provides faster penetration and reduced required feed force compared with rolled bits. This construction is particularly advantageous when working with alloyed and unalloyed steels, cast materials and hard plastics: the fully ground flute geometry yields sharp cutting edges and excellent runout accuracy. For users who need deeper bores or access to recessed holes, the extended overall length ensures reach without compromising hole quality. Cleaner holes and better centring on tough workpieces A 135° point angle reduces walking and improves centring when entering tough materials such as stainless steel. The reduced chisel edge from the point geometry lowers friction and allows for smoother entry, meaning less burr formation and cleaner bores. When paired with appropriate coolant and moderate speeds, the bit delivers precise, repeatable results that decrease post‑processing and rework. Built for workshops and drilling machines This Twist Drill is intended for use with standard drilling machines and is specified to DIN 340, which defines the longer execution for deep drilling tasks. The bright finished surface improves chip flow and offers basic corrosion protection during storage and operation. Its characteristics make it suitable for professional machinists and maintenance workshops that require a reliable, stable standard drill for a broad range of metalworking applications. Recommendations for use and tool care To maximise tool life and performance, use coolant when machining harder alloys and observe recommended cutting speeds for HSS‑G material. Because fully ground HSS bits can be more brittle than rolled variants, avoid shock loading and prefer stationary machines or well‑supported power drills. Regular sharpening restores cutting geometry; ground bits are straightforward to regrind to maintain the original precision and cutting behaviour. For deep, precise metal drilling choose the MetavCUT Twist Drill long HSS‑G 8 mm — METAV Werkzeuge offers expert technical advice and personalised support at info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data Bezeichnung: Twist Drill Marke: MetavCUT SKU: 53080-FDA Diameter: 8 mm Gesamtlänge: 165 mm Spirallänge: 109 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: long Schaft Ausführung: fully ground Für Bohrmaschine: Drilling Machine Farbe: bright finished Norm: DIN 340 Modellserie: Standard Line Anwendungen: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill is mainly used for drilling in metal; it is especially suited for machining high‑strength materials and larger diameters where deeper or recessed bores are required. Its ground geometry allows precise holes and reliable centring even in demanding workpieces. Which three drill types are there? The main categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for that application. Why are twist drills sharpened at the tip? The tip sharpening reduces the chisel edge at the drill point, which significantly lowers friction and required feed force. As a result the MetavCUT Twist Drill centres better in the workpiece and cuts with less resistance. Can a metal twist drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal bits are easier to resharpen and typically exhibit less self‑feeding action than wood‑specific designs. At what drilling depths is the twist drill most commonly used? A twist drill is the standard tool for through‑hole drilling in solid material. For diameters up to around 20 mm and depths up to approximately 100 mm, the twist drill is the most frequently used tool; the long version of the MetavCUT Twist Drill extends this capability for deeper holes.
8mm Rollgewalzter HSS Spiralbohrer, 118° Spitzenwinkel, Morsekegel, Schwarz - MetavCUT
Der Spiralbohrer von MetavCUT kombiniert rollgewalzte Fertigung, HSS-Material und Morsekegel-Schaft zu einem robusten Werkzeug für Standard-Metallbohrungen; profitieren Sie von hoher Zähigkeit, guter Standzeit und sicherer Spannübertragung direkt über Metav Werkzeuge oder lassen Sie sich von unserer Beratung unterstützen. Spiralbohrer von MetavCUT Standard Line (Morsekegel) Der Spiralbohrer ist ein rollgewalztes HSS-Spiralwerkzeug für robuste Metallbohrungen mit Morsekegel-Schaft, geeignet für allgemeine Werkstatt- und Maschinenanwendungen. HSS-Spiralbohrer, rollgewalzte Bauart Morsekegel-Schaft für hohe Drehmomentübertragung Ø 8 mm, Spirallänge 87 mm, Gesamtlänge 168 mm Für Stahl bis ca. 900 N/mm² geeignet Spitzenwinkel 118° für leichte Zentrierung Zähigkeit durch Fertigungsverfahren und Material für wirtschaftliche Bohrungen Die Kombination aus HSS und der rollgewalzten Herstellung macht dieses Spiralwerkzeug besonders zäh und bruchsicher. Weil der Rundstab beim Walzen in die Spirale gepresst wird, entsteht eine erhöhte Elastizität, die gerade bei kleineren Durchmessern das Bruchrisiko reduziert. Für Anwender bedeutet das weniger Werkzeugwechsel und geringere Stillstandszeiten bei Serien- und Einzelaufträgen. Geeignete Einsatzfelder und klare Materialgrenzen für sichere Planung Für alle üblichen Metallarbeiten in Werkstatt und Betrieb ist dieses Spiralwerkzeug ausgelegt: legierter und unlegierter Stahl, Gusswerkstoffe sowie Nichteisenmetalle und Kunststoffe. Die Angabe zur Festigkeit von ca. 900 N/mm² dient als Planungsgröße, damit Bohrungen in passenden Werkstoffen zuverlässig und wirtschaftlich ausgeführt werden können. So lassen sich Aufträge schneller kalkulieren und umsetzen. Maschinenanforderungen und Anwendungshinweise für präzise Ergebnisse Bei stationären Maschinen mit Morsekegel-Aufnahme sitzt der Bohrer sehr fest und überträgt hohe Lasten ohne zusätzliches Bohrfutter. Der Morsekegel sorgt für Selbsthemmung und Genauigkeit, vor allem bei höheren Vorschüben. Bei handgeführten Geräten empfiehlt sich vorbohren oder der Einsatz von Zentrierhilfen, um Wanderneigung zu vermeiden und saubere Bohrbilder zu erzielen. Praktische Tipps zur Handhabung und Lebensdauersteigerung Ein Spitzenwinkel von 118° erleichtert das Anstechen in weichere Materialien und verbessert das Zentrieren auf gewölbten Flächen. Für tiefe Bohrungen ist auf ausreichende Spanabfuhr und gegebenenfalls Kühlung zu achten, damit sich die Standzeit verlängert. Durch regelmäßiges Nachschleifen der Schaft- und Schneidengeometrie kann die Nutzungsdauer weiter optimiert werden. Die Empfehlung: MetavCUT Standard Line Spiralbohrer mit Morsekegel wählen für zuverlässige Metallbohrungen; bei Bedarf technische Rückfragen an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 richten Technische Daten Artikelnummer: 54080-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 345 Anwendung: Bohrer für Metall Fakten Durchmesser: 8 mm Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Besonderheiten Material: HSS Ausführung: rollgewalzt Schaftausführung: Morsekegel (MK) – konische Aufnahme, selbsthemmend Farbe: schwarz Verpackungseinheit: 1 Label: Spiralbohrer SKU: 54080-FDA FAQ Welche Materialien lassen sich mit dem Spiralbohrer bearbeiten? Der MetavCUT Standard Line Spiralbohrer eignet sich zum Bohren von legiertem und unlegiertem Stahl, Gusswerkstoffen, Nichteisenmetallen und Kunststoffen; die Angabe bis ca. 900 N/mm² dient als Richtwert für die Planung. Ist der Schaft für Ständerbohrmaschinen geeignet? Ja, der Spiralbohrer verfügt über einen Morsekegel-Schaft, sodass er direkt in passende Morsekegel-Aufnahmen von Ständerbohrmaschine oder Drehmaschine eingesetzt werden kann. Wie beeinflusst die rollgewalzte Fertigung die Leistung? Die rollgewalzte Bauart verleiht dem HSS-Material höhere Zähigkeit und geringeres Bruchrisiko, was besonders bei Standardaufgaben in Werkstatt und Montage wirtschaftliche Vorteile bringt. Welcher Spitzenwinkel ist optimal für unterschiedliche Werkstoffe? Der Spiralbohrer hat einen Spitzenwinkel von 118°, der sich besonders für weichere Materialien und einfache Zentrierung eignet; härtere Werkstoffe können andere Winkel benötigen. Gibt es eine Teilenummer zur Bestellung oder Rückfrage? Für Bestellungen und technische Rückfragen nutzen Sie bitte die Artikelnummer 54080-FDA für den MetavCUT Standard Line Spiralbohrer.
9,5mm Spiralbohrer rollgewalzt, HSS, 118° Spitzenwinkel, Morsekegel, 168mm Gesamtlänge - MetavCUT
Der rollgewalzte Spiralbohrer vereint Zähigkeit und Universaltauglichkeit beim Metallbohren; mit HSS-Material und Morsekegelschaft steht zuverlässige Kraftübertragung im Vordergrund. Nutzen Sie die robuste Fertigung und den 118° Spitzenwinkel für saubere Zentrierung in Stahl bis ca. 900 N/mm². Bestellen Sie direkt bei Metav Werkzeuge oder kontaktieren Sie unsere Beratung für technische Rückfragen. Spiralbohrer von MetavCUT — HSS, 9,5 mm, Morsekegel Der Spiralbohrer ist ein rollgewalzter HSS-Morsekegelbohrer für Metallbohrungen bis ca. 900 N/mm² und eignet sich für Ständerbohrmaschinen und Drehmaschinen mit MK-Aufnahme. Rollgewalzte HSS-Ausführung, erhöhte Zähigkeit Morsekegelschaft für festen Sitz in Ständerbohrmaschinen DIN 345 konform und für gängige Aufnahmen geeignet 9,5 mm Durchmesser mit 118° Spitzwinkel Robuste Fertigung für den täglichen Werkstattbetrieb Die rollgewalzte Herstellungsweise macht diesen Spiralbohrer besonders zäh und weniger bruchanfällig als geschliffene Werkzeuge, was im Alltag die Ausfallzeiten reduziert. Das Material HSS (Schnellarbeitsstahl) kombiniert hohe Festigkeit mit guter Wärmebeständigkeit, sodass der Bohrer bei typischen Schnittgeschwindigkeiten in Stahl, Guss und Nichteisenmetallen zuverlässig arbeitet. Der Einsatz des Morsekegelschafts sorgt für sichere Kraftübertragung und hohe Stabilität bei Bohrarbeiten an Ständerbohrmaschinen. Präzision, Anwendungsspektrum und Materialwahl Der 118° Spitzenwinkel ermöglicht sauberes Zentrieren und eignet sich besonders bei weicheren Werkstoffen wie Aluminium; bei härteren Legierungen bleiben bessere Ergebnisse mit angepasstem Schneidenwinkel erreichbar. Die Spirallänge von 87 mm unterstützt die Spänevakuierung in mitteltiefen Bohrungen und reduziert Verstopfungen. Anwender profitieren von der DIN 345-Konformität, die Kompatibilität und Austauschbarkeit innerhalb der Werkstatt sicherstellt. Bedienkomfort, Einsatzhinweise und Lebensdauer Durch die rollgewalzte Konstruktion ist der Bohrer elastischer und widerstandsfähiger gegenüber Stoßbelastungen, was das Risiko von Bruch bei Durchmessern unter 6 mm verringert. Für saubere Ergebnisse sollte vorbohrt oder schrittweise aufgebohrt werden, wenn tiefe Löcher erforderlich sind. Eine regelmäßige Kühlschmierung verlängert die Lebensdauer, reduziert Wärmebelastung und sorgt für gleichbleibende Bohrqualität. Empfehlung: Greifen Sie auf die Verlässlichkeit der MetavCUT Standard Line zurück und bestellen Sie den Bohrer direkt bei Metav Werkzeuge oder rufen Sie bei technischen Fragen an unter +49 2822 7131930 — professionelle Beratung inklusive. Produktmerkmale Artikelnummer: 54095-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 345 Fakten Durchmesser: 9,5 mm Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Besonderheiten Material: HSS Ausführung: rollgewalzt Schaft: Morsekegel — konisch, selbsthemmend Farbe: schwarz Verpackungseinheit: 1 Geeignet für: Stahl und Stahlguss bis ca. 900 N/mm², Gusseisen, Nichteisenmetalle und Kunststoffe FAQ Für welche Materialien eignet sich der Spiralbohrer von MetavCUT am besten? Der MetavCUT Spiralbohrer (DIN 345, HSS) ist ausgelegt für Stahl und Stahlguss bis ca. 900 N/mm² sowie für Gusseisen, Nichteisenmetalle und Kunststoffe; bei sehr harten Werkstoffen empfiehlt sich angepasste Schnittgeschwindigkeit und Kühlung. Welche Aufnahme ist für diesen Bohrer erforderlich? Der Spiralbohrer verfügt über einen Morsekegelschaft, er passt direkt in Morsekegel-Aufnahmen von Ständerbohrmaschinen und Drehmaschinen und überträgt hohe Drehmomente zuverlässig. Wie beeinflusst die rollgewalzte Ausführung die Anwendung? Die rollgewalzte Fertigung macht den Bohrer zäher und weniger bruchanfällig, was besonders bei Standardbohrungen in der Werkstattpraktisch ist; Präzisionsansprüche an Rundlaufgenauigkeit sind jedoch geringer als bei geschliffenen Bohrern. Welche Rolle spielt der 118° Spitzenwinkel in der Praxis? Der 118° Spitzenwinkel sorgt für gutes Zentrierverhalten und erleichtert das Eindringen in weichere Materialien; bei gewölbten Oberflächen oder speziellen Legierungen kann ein angepasster Winkel vorteilhaft sein.
9.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, Ø 9.1 mm, 118° Point Angle, Black, DIN 338 The Twist Drill Type N short HSS is a compact metalworking drill bit designed for precise drilling in steel and other metals with handheld or drilling machines. Short HSS Twist Drill for precise metal drilling Designed to DIN 338 for short cylindrical shanks 118° point angle for reliable centring and reduced walking Stable short length: 125 mm overall for less deflection Suitable for handheld drilling machines and workshop use Greater Stability and Precision for Metalworking Thanks to its short design and conformance to DIN 338, this Twist Drill offers increased rigidity and reduced tendency to bend compared with longer drills. The shorter protruding length gives better control and enables more accurate hole positioning in metal components. As a result, less rework is needed and tool life is supported by reduced lateral stress. Material Performance and When to Use It Made from HSS (High Speed Steel), the bit is optimised for standard metalworking tasks: it suits alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The 118° point angle makes the tip easier to centre on curved surfaces and softer materials while still delivering clean penetration into metal. For tougher materials, harder geometries may be chosen, but for many workshop and maintenance jobs this Type N bit is an efficient, reliable choice. Compatibility with Tools and Practical Tips With an overall length of 125 mm and a spiral length of 81 mm, the short execution reduces vibration during use and is particularly suitable for handheld drilling machines as well as bench drills. For best results, select appropriate spindle speed and steady feed; the roll-formed HSS construction helps reduce breakage risk on diameters below 6 mm and offers good re-sharpenability when needed. Practical Advantage and Quality Assurance This Type N short Twist Drill from MetavCUT focuses on stability and wide-ranging usability in metalworking. The black finish and standard cylindrical shank are compatible with common chucks, and the adherence to DIN 338 ensures consistent manufacturing tolerance. Whether for repair, workshop production or maintenance, the bit offers a balance of stability and versatility. For reliable metal drilling choose the MetavCUT Twist Drill Type N in Short HSS — METAV Werkzeuge provides expert technical advice and support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40091-FDA Diameter: 9.1 mm Point Angle: 118° Spiral Length: 81 mm Overall Length: 125 mm Material: HSS (High Speed Steel) Type: Type N Execution: short Standard: DIN 338 Colour: Black Application: Drills for Metal For Drill Machine: Hand Drill / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill Type N suitable for handheld drilling machines? The MetavCUT Twist Drill Type N in Short HSS is suitable for use with handheld drilling machines and bench drills; its reduced length minimises deflection and improves control when drilling metal with portable equipment. What are Twist Drills used for? Twist Drills are primarily used for machining high-strength materials and larger hole diameters; they are easy to regrind and resist higher loads, making them suitable for continuous metalworking operations. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills.
9.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 9.1 mm Diameter, 135° Tip, Short Execution, 5% Cobalt‑Alloyed, HSS‑E, DIN 338, Fully Ground Shank The Twist Drill is a short Type N drill designed for precision metalworking with drilling machines and hand drills. Short design for higher stability 5% cobalt alloy for increased heat resistance Fully ground shank for accurate concentricity Conforms to DIN 338 for consistent quality Outstanding material performance for demanding metalworking The HSS‑E composition with 5% Cobalt offers improved hot hardness and wear resistance compared with conventional HSS, which means longer tool life under elevated temperatures when machining tough alloys. This property makes the Twist Drill particularly effective for drilling alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics, while reducing the risk of premature wear. For users who require reliable performance in intermittent high‑load conditions, the alloyed steel matrix provides a clear advantage. Short execution that raises stability and precision A reduced overall length and shorter overhang significantly lower the tendency to deflect, resulting in cleaner holes and better repeatability when working on demanding components. The combination of the Short design and Type N geometry yields a stable cutting behaviour, especially when used in machine setups that limit chatter. The 135° Tip accelerates initial penetration in harder materials and helps maintain centring during the start of the cut, supporting accurate hole positioning even under challenging conditions. Precision ground geometry for clean, accurate holes The Fully Ground flute and web geometry ensure sharp cutting edges and high run‑out accuracy, producing smoother hole walls and tighter tolerances. Ground drills are manufactured by CNC grinding rather than rolling, which creates precise flute shapes and sharper lips suitable for fine work in metals. As a trade‑off, ground drills can be more brittle than rolled variants and therefore perform best with appropriate machining parameters and coolant to avoid thermal or mechanical shock. Designed for professionals in workshops and maintenance This Twist Drill from MetavCUT — part of the Standard Line — targets professional users who need dependable, repeatable results: maintenance technicians, toolroom operators and small to medium engineering shops. Its combination of HSS‑E material and the short form factor is particularly useful when drilling medium to hard steels where stability and hole quality are priorities. For routine workshop operations the drill balances durability and serviceability, as it can be re‑sharpened when required. Practical recommendations for optimal use For best results with the Twist Drill, secure the workpiece and use adequate cooling to preserve edge life and avoid overheating. The drill is intended for use in drilling machines and hand drills; selecting appropriate spindle speed and feed for a 9.1 mm diameter will reduce wear and improve surface finish. When drilling deep holes or larger diameters consider stepped approaches and peck drilling to evacuate chips effectively. Regular inspection and gentle re‑grinding keep the geometry precise and prolong component life. I highly recommend the MetavCUT Twist Drill for precise metal drilling applications — for individual technical advice or to confirm whether this drill meets specific project requirements please contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 47091-FDA Diameter: 9.1 mm Tip Angle: 135° Type: Type N Execution: Short Colour / Alloy: 5% cobalt‑alloyed Material: HSS‑E Shank Execution: Fully ground Spiral Length: 81 mm Overall Length: 125 mm For Machine: Drilling Machine / Hand Drill Series: Standard Line Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill is primarily applied when machining high‑strength materials and larger bore diameters; this drill form is easy to re‑grind and withstands higher loads, making it suitable for robust metalworking tasks. Which three drill types exist? Drill types are generally distinguished as metal drills, wood drills and stone/concrete drills, and the MetavCUT Twist Drill belongs to the metal drill category designed for machining ferrous and non‑ferrous metals.
9.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT verbindet erhöhte Stabilität durch die kurze Ausführung mit der Präzision eines geschliffenen HSS-G Schaftes; dadurch werden saubere Bohrbilder in legierten und unlegierten Stählen erzielt. Nutzen Sie die Kombination aus schneller Bohrleistung und reduzierter Anpresskraft und bestellen Sie den Bohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer Typ N von MetavCUT Der Spiralbohrer in Kurzausführung ist ein HSS-G Metallbohrer für präzise Bohrungen in Stahl und Gusseisen. Kurze Ausführung für höhere Stabilität Geschliffen (HSS-G) für scharfe Kanten Spitzenwinkel 135° für harte Werkstoffe Für Handbohrmaschine und stationäre Maschine Hohe Stabilität für präzise Metallbearbeitung Die kurze Ausführung reduziert die Auskraglänge und minimiert so Vibrationen sowie Verbiegen beim Bohren. Dadurch entsteht eine verbesserte Rundlaufgenauigkeit, die sich besonders bei Durchmessern im Standard-Bereich positiv bemerkbar macht. Für Anwender bedeutet das weniger Nacharbeit und sauberere Passungen bei Bohrungen in Stahl, Gusseisen oder Temperguss. Effizienz durch geschliffene HSS-Geometrie Der geschliffene HSS-G Schaft sorgt für sehr scharfe Schneidkanten und einen konstanten Spanabfluss, was die Bohrgeschwindigkeit erhöht und die notwendige Anpresskraft reduziert. In der Praxis führt das zu einer bis zu 40 % schnelleren Bearbeitung gegenüber konventionellen HSS-Ausführungen und erlaubt ein wirtschaftliches Arbeiten bei mittleren Serien und Einzelteilen. Geeignete Einsatzzwecke und Zielgruppe Dieser Kurzspiralbohrer ist ausgelegt für die Metallbearbeitung an Werkbank und in der leichten Werkstattproduktion. Er eignet sich für Handwerk und Industrie, insbesondere für Anwender, die stabile, präzise Bohrungen in legierten und unlegierten Stählen benötigen. Die Kombination aus kurzer Bauart und Typ N Normalspirale macht den Bohrer vielseitig einsetzbar. Handhabung, Kühlung und Sicherheitshinweise Geschliffene Kurzbohrer zeigen eine sehr gute Schnittwirkung, können aber bei unsachgemäßer Nutzung spröde reagieren. Bei der Bearbeitung harter Werkstoffe empfiehlt sich eine ausreichende Kühlung und das Anpunkten mit einem Zentrierbohrer bei hohen Anforderungen an Präzision. Die Nutzung an stationären Maschinen verbessert die Standzeit und minimiert Bruchrisiken. Empfehlung: Den MetavCUT HSS-G Kurzspiralbohrer als Standard Line für präzise Metallbohrungen über Metav Werkzeuge beziehen; bei Fragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erreichbar Produktmerkmale Artikelnummer: 45091-FDA Marke: MetavCUT Serie: Standard Line Fakten Durchmesser: 9,1 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl) Schaftausführung: Geschliffen (CNC-Schliff) Norm: DIN 338 (Kurzspiralbohrer) Typ: Typ N (Normalspirale) Ausführung: Kurz Farbe: blank (Bright finished) Verwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Hersteller: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line SKU: 45091-FDA FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer Typ N in HSS-G Ausführung eignet sich vor allem für legierte und unlegierte Stähle, Gusseisen sowie harte Nichteisenmetalle; die geschliffene Geometrie gewährleistet saubere Bohrungen. Ist der Bohrer für Handgeführte Geräte geeignet? Ja, der Spiralbohrer wurde für den Einsatz an Handbohrmaschine und stationären Maschinen konzipiert; bei besonders kleinen Durchmessern ist jedoch auf Stabilität und Rundlauf zu achten. Welchen Vorteil bringt der Spitzenwinkel von 135°? Der 135° Spitzenwinkel reduziert das Anlaufen beim Anbohren harter Werkstoffe und erleichtert das Eindringen in Edelstahl oder gehärtete Stähle, was bei dem MetavCUT HSS-G Bohrer deutlich spürbar ist. Wie wirkt sich die geschliffene Schaftausführung auf die Standzeit aus? Die geschliffene Ausführung sorgt für hohe Präzision und scharfe Schnittkanten, wodurch saubere Bohrbilder entstehen; bei fehlender Kühlung kann die Sprödigkeit die Bruchgefahr erhöhen. Welche Norm beschreibt diesen Bohrertyp? Die Herstellung und Abmessung orientiert sich an DIN 338, die kurze Spiralbohrer mit Zylinderschaft klassifiziert; der MetavCUT Spiralbohrer entspricht dieser Norm (SKU 45091-FDA).
9.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N short bright finished (Ø 9.25 mm, 135°, HSS‑G, DIN 338) by MetavCUT The Twist Drill Type N short is a precision metalworking drill designed for Drilling Machines and manual drilling, offering a compact, stable design for hard materials. Short design for high stability and precision Fully ground shank for accurate concentricity 135° point angle for drilling hard steels HSS‑G material: sharp, precise holes in metal Conforms to DIN 338 for short twist drills Durable cutting geometry for demanding metalwork The HSS‑G material and CNC grinding process give this Twist Drill a very sharp cutting edge and high runout accuracy, resulting in clean, burr‑reduced holes when used on metal. Professionals benefit from the improved hole quality and consistency, since the ground flute geometry is optimized for metals such as alloyed and unalloyed steel, cast steel, and non‑ferrous alloys. This results in fewer reworks and better component fit in assemblies. Short length increases rigidity and speeds up working steps Thanks to the short spiral length and compact overall profile, bending and chatter are significantly reduced, which improves hole precision in demanding operations. The shorter overhang also enables up to 40% faster drilling with about 50% less feed force compared with conventional HSS drills, making it particularly effective for tight‑tolerance metalworking and applications on stationary or portable drilling machines. Targeted use: where best results are achieved This Twist Drill Type N short by MetavCUT is aimed at machinists, toolrooms and maintenance workshops that require reproducible, high‑quality holes in metallic components. It is especially suited to operations on Drilling Machines and other rotating tools where stability matters. Its 135° point angle helps reduce entry burrs and improves centring when working with harder materials such as stainless steel. Standard compliance and handling considerations Manufactured to DIN 338 and delivered as a fully ground (HSS‑G) short drill, this tool provides tight tolerances and repeatable performance. Users should be aware that ground HSS drills can be more brittle than rolled variants and therefore benefit from adequate coolant and moderate cutting parameters. Periodic resharpening restores the precise geometry; when regrinding, keep the original point angle to preserve centring behavior. Strong recommendation: For precision metal drilling choose the MetavCUT Twist Drill Type N short and contact METAV Werkzeuge for personalised technical advice via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 450925-FDA Diameter: 9.25 mm Point angle: 135° Type: Type N Execution: short Finish/Color: bright finished Shank execution: fully ground Material: HSS‑G Spiral length: 81 mm Overall length: 125 mm For machine: Drilling Machine Model series: Standard Line Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N short best used for? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength materials and larger diameters in metalworking; its design and ground geometry make it easy to resharpen and capable of withstanding greater loads during drilling. Which three drill types exist? Common categories are metal drills (like the MetavCUT Twist Drill Type N), wood drills, and stone/concrete drills; each is optimised in geometry and material for its specific substrate. Why are twist drills pointed (resharpened)? The point sharpening reduces the cross‑cut at the tip of the Twist Drill Type N short, lowering friction and thus the required feed forces while improving centring of the drill in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill Type N can be used in wood, but guidance and finish are inferior to a dedicated wood drill; however, metal drills are easier to resharpen and show less self‑feeding tendency. At which drilling depths is the Twist Drill most commonly used? A through hole in solid stock is typically produced with a Twist Drill; for diameters up to about 20 mm and drilling depths up to around 100 mm, the Twist Drill Type N short and related designs are the most commonly used tooling. Is HSS or HSSE better for my application? The general belief that HSSE is always superior to HSS is not universally correct; assess working conditions and cost‑benefit to decide whether the higher price of HSSE is justified for your specific use with tools such as the MetavCUT Twist Drill Type N.
9.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT bietet eine Kombination aus hoher Stabilität durch die kurze Auskraglänge und bewährtem HSS-Werkstoff; dadurch ergibt sich präzises Bohren in Metall bei reduziertem Bruchrisiko. Nutzen Sie die normative Sicherheit durch DIN 338 und die bewährte Typ-N-Geometrie für verlässliche Ergebnisse. Bestellen Sie den Artikel direkt über Metav oder kontaktieren Sie die Beratung bei Bedarf. Spiralbohrer von MetavCUT – kurzer HSS-Bohrer für Metall Der Spiralbohrer ist ein kurzer HSS-Bohrer nach DIN 338, konzipiert für präzise Metallbohrungen auf Hand- und stationären Bohrmaschinen. Kurze Ausführung für erhöhte Stabilität HSS-Material: elastisch und brucharm Nach DIN 338 gefertigte Spiralgeometrie Typ N Normalspirale für Metallbearbeitung Spitzenwinkel 118° für gute Zentrierung Hohe Stabilität für präzise Metallbohrungen Die kurze Ausführung reduziert die Auskraglänge und verbessert so die Stabilität beim Bohren, was insbesondere bei Durchmessern im Standardbereich vorteilhaft ist. Für einen Durchmesser von 9,2 mm sorgt die kompakte Bauweise für weniger Vibration und ein saubereres Bohrbild, wodurch Nachbearbeitung minimiert wird. Das Ergebnis ist eine gleichbleibende Lochqualität und eine erhöhte Werkzeuglebensdauer durch geringere Schwingungsbelastung. HSS und Norm: Materialwissen für sichere Auswahl Der Einsatz von HSS (Schnellarbeitsstahl) macht den Bohrer elastisch und reduziert das Risiko von Bruch bei Bohrungen unter 6 mm sowie bei anspruchsvollen Standardaufgaben. Die Einhaltung von DIN 338 garantiert die Form- und Längenabmessungen der kurzen Spiralbohrer mit Zylinderschaft und erleichtert den Austausch in Werkzeugaufnahmen. Der Kundennutzen liegt in planbarer Qualität und der Kompatibilität mit gängigen Spannfuttern. Einsatzgebiet: Alltagstauglich in Werkstatt und Montage Mit Blick auf den Durchmesser gehört dieser Bohrer in den Standard-Bereich und eignet sich damit sehr gut für Werkstatt, Montage und DIY, speziell für dünne bis mittlere Bleche und Profile. Die Typ N-Spiralform ist optimal für Metall, Eisen und Stahl ausgelegt und funktioniert zuverlässig in Handbohrmaschinen sowie stationären Bohrständern. Anwender profitieren von einem vielseitigen Allrounder für häufige Metallbohrungen. Praxis-Tipps für sichere Anwendung und lange Standzeit Beim Bohren empfiehlt sich ein Anpunkten mit Zentrierbohrer für höchste Genauigkeit bei Präzisionslöchern; Kühlschmierstoff verlängert die Standzeit und verhindert Überhitzung. Der Spitzenwinkel 118° unterstützt das Zentrieren in üblichen Metallwerkstoffen und erleichtert den Einstich auf gewölbten Flächen. Reinigung der Spirale nach dem Einsatz und korrektes Spannen im Bohrfutter vermeiden Verkantungen und Bruch. MetavCUT empfiehlt diesen kurzen HSS-Spiralbohrer als stabile Lösung für regelmäßige Metallbohrungen – Beratung und Lieferung direkt aus Emmerich unter info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 40092-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Typ: Typ N Norm: DIN 338 Material: HSS Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Fakten Durchmesser: 9,2 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten DIN 338 konforme kurze Spiralbohrer Geeignet für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe (siehe Herstellerinfo) Kurzausführung für erhöhte Stabilität Typ N Normalspirale: klassische Metallgeometrie Rollgewalzte oder geschliffene Varianten möglich laut Herstellerinformation FAQ Ist dieser Bohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer (Spiralbohrer, Typ N, SKU 40092-FDA) ist primär für allgemeine Metallbearbeitung ausgelegt; bei Edelstahl empfiehlt sich langsame Schnittgeschwindigkeit und geeigneter Kühlschmierstoff, damit der HSS-Werkstoff lange standhält. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der kurze HSS-Spiralbohrer von MetavCUT ist für Handbohrmaschinen geeignet und bietet durch die reduzierte Auskraglänge bessere Stabilität als Standardlängen. Welche Bohrtiefe ist mit diesem Bohrer praktikabel? Die Spirallänge von 81 mm ermöglicht sichere Bohrungen bis zur praktischen Einsatzlänge; für sehr tiefe Löcher sind mehrstufige Maßnahmen oder längere Spezialwerkzeuge sinnvoll. Wie sollte der Bohrer gespannt werden? Spannen Sie den kurzen Spiralbohrer sauber konzentrisch im Bohrfutter; der Zylinderschaft und die kompakte Bauform reduzieren Verkantungsrisiken und unterstützen ein gleichmäßiges Drehmoment. Eignet sich der Bohrer für Lochpassungen mit hoher Präzision? Für hochpräzise Passungen empfiehlt sich Voraussetzen mit Zentrierbohrer und gegebenenfalls Nachbearbeitung; der MetavCUT Spiralbohrer liefert stabile Bohrbilder, ist aber kein Hochpräzisionsspezialwerkzeug.
9.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Nutzen Sie die Kombination aus HSS-E-Legierung, kurzer Ausführung und 135° Spitzenwinkel für präzise und stabile Bohrungen in Stahl und Nichteisenmetall. Bestellen Sie den Bohrer direkt über Metav oder kontaktieren Sie unsere Beratung für passende Alternativen und Anwendungsempfehlungen. Spiralbohrer HSS-E 9,2 mm Typ N von MetavCUT (SKU 47092-FDA) Spiralbohrer HSS-E kurz für präzises Bohren in Stahl, Guss und Nichteisenmetall bei stationären und handgeführten Maschinen HSS-E kurz: erhöhte Stabilität beim Bohren Für Handbohrmaschine und Werkstattgebrauch 9,2 mm Durchmesser nach DIN 338 Geschliffener Zylinderschaft für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für härtere Werkstoffe Stabile Bauweise für präzise Metallbohrungen Die kurze Ausführung reduziert die Auskraglänge und erhöht damit die Stabilität bei der Bearbeitung. Bei einem Spiralbohrer aus HSS-E führt die geringere Biegung zu weniger Wandern und saubereren Bohrbildern. Die geschliffene Geometrie sorgt für scharfe Schneidenkanten, die das Eindringen in legierte und unlegierte Stahlwerkstoffe erleichtern. Als Ergebnis entsteht eine gleichmäßige Spanbildung und eine längere Standzeit bei sachgemäßer Kühlung. Geeignet für Werkstatt und Montage, ideal im Standard-Bereich Mit einem Durchmesser von 9,2 mm fällt der Bohrer in den Standard-Bereich und ist damit prädestiniert für Alltagsaufgaben in Werkstatt, Montage und DIY-Projekten. Die Auslegung nach DIN 338 macht ihn kompatibel mit üblichen Zylinderschaft-Aufnahmen und stationären Säulenbohrmaschinen. Für präzise Passungen empfiehlt sich zusätzlich das Anpunkten mit einem Zentrierbohrer, um Wandern auf der Oberfläche zu vermeiden. Kompatibilität und Handhabung für Profi und Handwerker Der Zylinderschaft und die kurze Gesamtlänge reduzieren Schwingungen und ermöglichen den Einsatz in Handbohrmaschine ebenso wie in stationären Maschinen. Bei mittleren Bauteilen sorgt die Bauform für sichere Drehmomentübertragung und kontrollierte Spanabfuhr. Für tiefe oder sehr harte Bohrungen wird eine geeignete Kühlschmierstoffzufuhr empfohlen, um Wärmeentwicklung und Werkzeugverschleiß zu minimieren. Materialqualität, Normen und praktische Arbeitstipps Die Fertigung aus HSS-E (hochlegierter Schnellarbeitsstahl) mit kobaltlegierter Zusammensetzung erhöht die Warmfestigkeit und Zähigkeit gegenüber einfachem HSS. Die Kennzeichnung nach DIN 338 steht für kurze Spiralbohrer mit Zylinderschaft und definiert Maße sowie Toleranzen. Der 135° Spitzenwinkel ist optimal für härtere Werkstoffe; bei extrem hartem Edelstahl empfiehlt sich reduzierter Vorschub und konstante Kühlung, um ein Verkanten oder Überhitzung zu verhindern. Bestellen Sie den MetavCUT Spiralbohrer HSS-E 9,2 mm für präzise Metallbohrungen direkt bei Metav — bei Fragen zur Anwendung erreichen Sie uns per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47092-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Fakten Durchmesser: 9,2 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-E (hochlegierter Schnellarbeitsstahl) Schaftausführung: geschliffen Farbe: 5% kobaltlegiert Typ: Typ N (Normalspirale) Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der MetavCUT Spiralbohrer HSS-E 9,2 mm ist ausgelegt für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; bei härteren Werkstoffen empfiehlt sich Kühlung und angepasster Vorschub. Ist der geschliffene Schaft ein Vorteil für stationäre Maschinen? Ja, die geschliffene Schaftausführung erhöht die Rundlaufgenauigkeit und liefert sauberere Bohrbilder, besonders vorteilhaft bei stationären Säulenbohrmaschinen und Anwendungen mit hohen Anforderungen an Maßhaltigkeit. Wie verhält sich der Bohrer bei tiefen Bohrungen? Der kurze Spiralbohrer ist für präzise, flachere Durchgangsbohrungen optimiert; für sehr tiefe Löcher sollte mehrstufiges Aufbohren oder längere Spirale gewählt werden, da die Spanabfuhr sonst eingeschränkt sein kann. Welche Vorteile bringt der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert das Ausbrechen beim Anbohren in harten Werkstoffen und verbessert die Zentrierung, was besonders bei Edelstahl und gehärteten Stählen von Vorteil ist. Entspricht der Bohrer einer Norm und welche Bedeutung hat das? Ja, der Bohrer entspricht DIN 338, was die Klassifizierung kurzer Spiralbohrer mit Zylinderschaft regelt und damit Kompatibilität sowie definierte Maß- und Fertigungsanforderungen sichert.
9.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Type N, Ø 9.2 mm, 135°, Bright Finished The Twist Drill is a short Type N drill for precise metalworking that delivers high stability and fast penetration in demanding applications with drilling machines. Short design for greater stability and precision HSS‑G, fully ground geometry for fast cutting 135° tip angle optimised for harder materials Conforms to DIN 338 for short twist drills Bright finished shank with 125 mm overall length Precision performance for metalworking professionals The Twist Drill from MetavCUT combines a short execution with a fully ground HSS‑G geometry, enabling up to 40% faster drilling with significantly reduced feed force. This configuration reduces vibration and bending, so drilling holes remain accurate even in tougher alloys. The 135° tip angle is specifically helpful when working with stainless steel and other hard materials, as it shortens pilot time and improves centring. For workshops requiring repeatable, clean holes, this tool delivers measurable efficiency gains. Short length for greater stability and cleaner holes A reduced overall length means less overhang from the chuck and therefore less tendency to wander. The shorter Spiral Length and compact design provide superior stability and allow higher cutting speeds with better runout behaviour. Because the cutting lips are produced by CNC grinding (HSS‑G), edge sharpness and concentricity are improved, resulting in cleaner holes and longer tool life under appropriate cutting conditions and coolant use. This makes the drill particularly suitable for precision machining tasks. Suited applications and target users Intended primarily for metalworking, the MetavCUT Twist Drill is aimed at professional workshops, maintenance teams and fabrication shops that operate drilling machines and stationary machine tools. The drill is effective on alloyed and unalloyed steels, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. Its short, rigid design benefits tasks where hole quality and repeatability matter most, for example component manufacturing, toolrooms and industrial maintenance. Practical details and handling recommendations Key handling advantages include the bright finished surface for corrosion resistance and easy chip evacuation, plus a fully ground shank that ensures precise clamping and minimal runout. The drill’s overall length is 125 mm with a spiral length of 81 mm and a diameter of 9.2 mm, dimensions that balance accessibility and rigidity. For best results in hard materials, use appropriate cutting fluid and moderate feed to exploit the drill’s geometry; avoid excessive pecking that could induce thermal stress. Regular inspection and resharpening preserve accuracy and extend service life. Strong recommendation: Choose the MetavCUT short HSS‑G Twist Drill for demanding metal drilling tasks and contact METAV Werkzeuge for expert technical advice — 📧 info@metav-werkzeuge.com / ☎️ +49 2822 7131930 / ✔️ WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 45092-FDA Diameter: 9.2 mm Spiral Length: 81 mm Overall Length: 125 mm Tip Angle: 135° Type: Type N Execution: short Shaft Finish: fully ground Material: HSS-G Colour: bright finished Application: Drills for metal For Drilling Machine: Drilling Machine Model Series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill best suited for? The MetavCUT Twist Drill (Type N) is tailored for metalworking and performs best in alloyed and unalloyed steels, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics; its 135° tip and HSS‑G grind enable controlled entry and efficient chip formation in harder materials. Is the MetavCUT Twist Drill suitable for handheld use or only for machine tools? Although the MetavCUT Twist Drill is primarily intended for use on rotating machine tools for optimal rigidity and accuracy, it can be used in drilling machines where the toolholder provides secure clamping; for handheld operations ensure minimal overhang and steady feed to avoid breakage. What is a Twist Drill used for? A Twist Drill is mainly applied to machining high‑strength materials and larger drill diameters; its geometry allows easy resharpening and it withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills.
Reliable performance for daily drilling
The Standard line is a versatile series of HSS (high-speed steel) twist drills, also described as standard twist drills or precision HSS twist drills, engineered for everyday industrial and workshop use. Positioned between economy options and specialist pro-grade tools, the standard line delivers consistent, repeatable results for regular drilling tasks without the need for high-cost alloys.
How the standard line performs in practice
Designed as precision ground (HSS‑G) twist drills, the standard line combines a refined manufacture process with a classic geometry. A typical 118° tip and a cleanly formed point give good penetration and reliable centring, while extremely smooth flute surfaces support efficient chip evacuation. The result is stable running, improved hole quality and extended tool life under normal production and maintenance conditions.
Key advantages that matter on the shop floor
- Reduced rework thanks to high concentricity and precise hole quality
- Lower tool consumption through enhanced wear resistance from precision grinding
- Faster cycle times via efficient chip removal from smooth flutes
- Broad applicability across common materials: steel, cast iron, sintered metal, plastics and non‑ferrous metals
- Ideal balance of performance and cost for workshops, maintenance teams and assembly lines
Technical data
- Material: HSS (high-speed steel)
- Manufacture: precision ground (HSS-G)
- Tip angle: 118° (typical)
- Features: smooth flutes, optimised point geometry, excellent concentricity
- Applications: unalloyed steel, low-alloy steel, cast iron, sintered metal, plastics, non‑ferrous metals
Why Metav is the smart sourcing choice
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of technical know-how with a broad assortment, making high-quality measuring and workshop tools accessible to small and large operations alike. With over 48,000 customers, more than 250,000 products and a logistics hub in Emmerich, Metav offers dependable supply and a curated quality filter for the european market — the sensible route to equip your shop with standard line twist drills and complementary tooling.
FAQ
What materials are standard line twist drills suitable for?
The standard line twist drills are suitable for unalloyed and low‑alloy steel, cast iron, sintered metal, plastics and non‑ferrous metals, matching typical workshop and light industrial requirements.
How does the precision ground (HSS‑G) design benefit drilling results?
Precision ground manufacture increases concentricity and improves cutting edge finish, which leads to better hole quality, reduced vibration and longer tool life compared with roll‑formed entry‑level drills.
Are standard line drills a substitute for pro‑grade specialist drills?
Standard line drills are intended as the reliable everyday option; they deliver consistent performance for regular production and maintenance but are not a replacement when extreme loads or specialised alloys demand pro‑grade materials.
Which synonyms should procurement teams use when searching for these tools?
Search terms such as “standard twist drills”, “HSS standard drills” or “precision HSS twist drills” will reliably lead to the standard line and comparable products.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com