Precision short twist drills for exact, clean holes
The HSS-G short twist drill DIN 338 type N with a 135° split point and cross grind provides a versatile solution for metalworking, designed to deliver high concentricity and razor-sharp cutting edges for demanding production and workshop applications. Its ground, polished blank surface reduces friction and prevents built-up edge when machining soft, lubricious materials such as aluminium or plastics, while the flatter 135° point with cross grind improves self-centring and lowers feed force so that pre‑spotting is often unnecessary. This drill is ideal for handheld, bench and pillar drilling operations, combining excellent chip evacuation, consistent hole accuracy and robust performance.
5.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — Type N short, 5.75 mm, 135°, Bright finished, HSS-G, DIN 338 The MetavCUT Twist Drill (Type N, short) is a precision HSS-G drill designed for stable, high-performance metal drilling in handheld and machine setups. Short design for increased stability HSS-G fully ground for sharp holes 135° Point angle for hard metals Suited for Drilling Machine use in metal Conforms to DIN 338 for standard reliability Precision and force: ideal for demanding metal drilling This short Twist Drill combines a 5.75 mm Diameter with a 135° Point Angle to reduce punch-in and improve guidance when working with hard materials. The HSS‑G (Ground High Speed Steel) material produces very sharp cutting edges after CNC grinding, resulting in clean, round holes and excellent concentricity. For operators this means fewer reworks and a consistently high hole quality when drilling steel, cast iron or alloyed metals. Short length for stability and control A shorter overall Length and reduced projection deliver measurable advantages: the reduced overhang lowers the risk of bending and chatter, which improves hole accuracy and tool life. The fully ground Shank ensures precise clamping in the chuck and consistent Runout. As a result, the short Type N design is particularly suited to precision tasks and machine-mounted operations where stiffness and repeatable performance matter. Material suitability and recommended use cases The MetavCUT Twist Drill is optimised for metalworking: suitable for alloyed and unalloyed steel, cast and spheroidal graphite iron, non‑ferrous metals and hard plastics. The 135° tip is chosen for tougher materials because it shortens the initial bite and reduces axial forces. When working with stainless steel or other high‑strength alloys, use appropriate coolant and moderate speeds to preserve sharpness and avoid work hardening. Practical tip and maintenance advice for longer life Because these drills are ground rather than rolled, occasional regrinding is straightforward and restores the original geometry. Regrind to maintain the 135° Point Angle and symmetrical cutting lips to keep hole quality high. For best results in production settings, clamp the workpiece securely, use proper coolant and select feed and speed according to material charts—this reduces wear and prevents premature breakage. For precision metalworking choose the MetavCUT Twist Drill short Type N with HSS‑G grinding — and contact METAV Werkzeuge for tailored technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Twist Drill Brand: MetavCUT SKU: 450575-FDA Diameter: 5.75 mm Spiral Length: 57 mm Overall Length: 93 mm Point Angle: 135° Type: Type N Execution: short Shank Finish: fully ground Surface/Colour: bright finished Material: HSS-G Standard: DIN 338 Application: Drills for metal Suitable For: Drilling Machine, Hand Drilling where machine stability is provided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N, short, HSS‑G) is primarily used for machining high‑strength materials and larger drill diameters; its ground geometry allows precise drilling in metals and hard plastics while withstanding greater loads. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is engineered for that application. Why is the MetavCUT Twist Drill supplied with a 135° point angle? The 135° Point Angle reduces axial entry force and improves centring in hard materials, which helps decrease Anbohrzeit and delivers a cleaner start hole when drilling stainless steels and other tough alloys. Can the MetavCUT Twist Drill be used for drilling wood? The MetavCUT Twist Drill can be used in wood, but it offers less guidance and a rougher finish compared with specialised wood bits; it is easier to resharpen and shows lower self‑feed characteristics than dedicated wood drills. If you are unsure whether this tool fits your requirements or need additional technical data, METAV Werkzeuge offers comprehensive consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
5.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G Twist Drill (Diameter 5.7 mm, 135° tip, Type N, Bright finished, Short, DIN 338) The Twist Drill Type N for Drilling Machine is a short, fully ground HSS-G tool designed for precise metalworking and reliable performance in hard materials. Short design for higher stability Fully ground shank for precise centring 135° tip suited to hardened and stainless steels HSS-G construction for sharp edges and clean holes Conforms to DIN 338 for short metal Twist Drills Durable HSS‑G Construction for cleaner, faster holes Built from HSS‑G, this short Twist Drill delivers sharp cutting edges and high roundness for consistently clean holes in metal. The ground geometry produces fine cutting edges that reduce burr formation and improve hole quality. As a consequence of the grinding quality, this variant drills up to 40% faster and requires about 50% less feed force compared with conventional HSS tools, which is particularly beneficial when working with alloyed or unalloyed steel, cast iron and hard plastics. Short geometry that enhances precision and reduces vibration A shorter overall length and reduced cantilever create noticeably improved stability during machining, which lowers the tendency to wander or bend. The short design makes this Twist Drill especially suitable for accurate operations on stationary or light-duty machines where rigidity matters. Manufactured to DIN 338, the tool’s dimensions and tolerances align with industry expectations for short cylindrical‑shank metal Twist Drills, ensuring predictable performance in professional environments. Optimised tip and fully ground shank for reliable centring With a 135° tip angle, this Twist Drill is prepared for harder materials and reduces initial skidding on tough surfaces. The CNC grinding of the flutes and point results in precise point geometry and excellent runout accuracy, improving hole placement. The fully ground shank supports secure clamping and accurate centring in chucks, which in turn increases tool life when appropriate coolant and speeds are applied. Designed for demanding metalworking tasks and workshops Engineered as a classic Type N metal Twist Drill, this short HSS‑G model addresses the needs of professionals who require repeatable, high‑quality bore results in metals and hard plastics. The bright finished surface aids chip evacuation and inspection, while the robust construction tolerates higher cutting pressures when used with correct feeds and lubrication. For workshops that prioritise precision, the combination of short length and ground geometry offers a reliable balance between rigidity and cutting performance. For demanding metalworking tasks choose the MetavCUT Twist Drill Type N for proven HSS‑G performance — for personalised technical advice or additional specifications contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271. Technical Information Designation: Twist Drill Marke: MetavCUT SKU: 45057-FDA Diameter: 5.7 mm Tip angle: 135° Type: Type N Execution: Short Colour: Bright finished Spiral length: 57 mm Overall length: 93 mm Shank finish: Fully ground Material: HSS-G Norm: DIN 338 Application: Drills for metal Model series: Standard Line Suitable for: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill from MetavCUT, Type N? The MetavCUT Twist Drill Type N is primarily employed for machining high‑strength materials and larger bore diameters; its design is easy to re‑grind and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? For general guidance, the main categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N falls into the Metal drills category for use on metals and related materials. Why are Twist Drills with a ground point sharpened (ausgespitzt)? The sharpening reduces the cross‑cut at the tip, which substantially lowers friction and therefore requires less feed force; the improved tip also helps the MetavCUT Twist Drill Type N to centre more reliably in the workpiece. Can the MetavCUT Twist Drill Type N be used to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; the metal drill is easier to re‑sharpen and has a lower self‑feeding tendency. For which drilling depths is the Twist Drill the most used tool? A solid bore is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill (including models like the MetavCUT Type N) is the most commonly used tool. Is HSS better than HSSE? The common belief that HSSE steels are automatically superior to HSS is inaccurate; selection between HSS and HSSE should consider specific work conditions and whether the higher purchase cost of HSSE is justified for the task at hand.
5.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze HSS‑G Spiralbohrer überzeugt durch Stabilität, hohe Schnittgeschwindigkeit und einen 135° Spitzenwinkel für harte Werkstoffe; ideal für präzise Metallbohrungen in Werkstatt und Industrie. Nutzen Sie die Kombination aus schneller Bohrleistung und robuster Ausführung für zuverlässige Ergebnisse und bestellen Sie direkt über Metav oder fragen Sie unsere technische Beratung an. Spiralbohrer 5,8 mm — kurzer HSS‑G Metallbohrer Der Spiralbohrer in kurzer Ausführung für präzise Metallbohrungen mit 135° Spitzenwinkel und geschliffenem Zylinderschaft. Spiralbohrer von MetavCUT geschliffen Kurze Ausführung für höhere Stabilität HSS‑G für schnelle und saubere Bohrung 135° Spitzenwinkel für harte Werkstoffe Zylinderschaft nach DIN 338 Mehr Stabilität, höhere Vorschubkraft und schnelleres Bohren Die kurze Bauform reduziert die Auskraglänge und erhöht so die Steifigkeit des Werkzeugs. Dadurch entsteht weniger Verbiegen bei der Bohrung und die Kraftübertragung bleibt konstant, was besonders bei legierten Stählen und Temperguss von Vorteil ist. Der geschliffene HSS‑G Werkstoff sorgt für sehr scharfe Schneiden und ermöglicht laut Hersteller bis zu 40 % schnellere Bohrfortschritte bei gleichzeitig bis zu 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS‑Bohrern. Für Anwender bedeutet das weniger Nacharbeit und eine effizientere Fertigung. Geeignet für Handwerk, Werkstatt und Maschinenbetrieb Dank des Durchmessers von 5,8 mm und der Klassifikation im Standard‑Bereich eignet sich dieses Werkzeug für den typischen Werkstattalltag: Montage, Reparatur und präzise Metallbearbeitung. Die kurze Ausführung passt gut in handgeführte Bohrmaschinen, bringt aber ihre Stärken auf stationären Säulenbohrmaschinen voll zur Geltung. Zur Vermeidung von „Wandern“ bei der Anbohrung empfiehlt sich ein Anreißstift oder ein Vorstechen mit einem Zentrierbohrer; für gehärtete Werkstoffe wird außerdem Kühlschmierstoff empfohlen. Fertigungsqualität, Norm und Einsatztipps Der Spiralbohrer entspricht DIN 338 und ist als geschliffener Typ ausgeführt, wodurch die Spannuten per CNC‑Schliff ausgearbeitet sind. Diese Fertigungsart liefert hohe Rundlaufgenauigkeit und saubere Bohrbilder, kann aber spröder sein als rollgewalzte Ausführungen; daher ist der Einsatz mit Kühlung und kontrollierter Schnittgeschwindigkeit sinnvoll. Der 135° Spitzenwinkel reduziert das Anbohrverhalten in harten Metallen und verlängert die Standzeit bei korrekter Handhabung. Der Zylinderschaft ist für einfache Spannsysteme ausgelegt und erlaubt schnellen Werkzeugwechsel. Für präzise Metallbohrungen empfiehlt MetavCUT den kurzen HSS‑G Spiralbohrer in der Ausführung Standard Line; Bestellung und technische Beratung erhalten Sie direkt bei Metav per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 45058-FDA Marke: MetavCUT Modellserie: Standard Line Ausführung: kurz Fakten Durchmesser: 5,8 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen Norm: DIN 338 (Kurzspiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale für Metall) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine FAQ Eignet sich dieser Bohrer für Edelstahl? Der kurze HSS‑G Spiralbohrer von MetavCUT ist für harte Werkstoffe ausgelegt; der 135° Spitzenwinkel reduziert das Anlaufen und macht den Bohrer für viele Edelstähle geeignet, sofern mit geeigneter Schnittgeschwindigkeit und Kühlschmierstoff gearbeitet wird. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Durchmesser von 5,8 mm fällt in den Standard‑Bereich und ist für Handbohrmaschinen geeignet; die kurze Ausführung verbessert die Stabilität, dennoch empfiehlt sich beim Bohren von harten Materialien eine stationäre Maschine oder ruhige Handführung. Was bedeutet HSS‑G und geschliffen? HSS‑G steht für Geschliffenen Schnellarbeitsstahl; geschliffene Bohrer bieten scharfe Kanten und hohe Rundlaufgenauigkeit, sind aber tendenziell spröder als rollgewalzte Werkzeuge und profitieren von Kühlung bei hohen Belastungen. Wie verhindert man das Wandern beim Anbohren? Vorstechen mit einem Zentrierbohrer oder Anreißen an der Bohrstelle reduziert das Wandern. Für den MetavCUT Spiralbohrer empfiehlt sich zudem eine geringe Vorschubkraft beim Ansetzen und gegebenenfalls ein Zentrierstift. Welche Vorteile bringt die DIN 338 Klassifizierung? Die DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft aus HSS; die Einhaltung dieser Norm garantiert standardisierte Maße, Austauschbarkeit im Spannfutter und Fertigungsqualitäten, wie sie beim Spiralbohrer MetavCUT mit der Artikelnummer 45058-FDA vorliegen.
5.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G Twist Drill, 5.9 mm, 135°, Type N, Bright Finish, Short, DIN 338 A Twist Drill designed as a Short HSS-G Type N for precise metal drilling with portable and stationary Drilling Machines. Short design for higher stability in tight setups 135° tip optimised for hard materials such as stainless steel HSS‑G ground geometry for clean, precise holes Fully ground shank for reliable concentricity Conforms to DIN 338 for short cylinder‑shank drills Improved accuracy when drilling hard metals The short HSS‑G configuration reduces overhang and vibration, delivering noticeably better hole quality in demanding materials. With a 135° tip, the drill penetrates harder steels with less wandering, while the ground flute geometry produces clean chips and consistent hole diameters. For machinists and maintenance professionals this means fewer reworks and higher first‑pass accuracy when working with cast iron, alloyed and unalloyed steels. Greater stability and easier handling in tight setups A reduced overall length and shorter protrusion from the chuck increases stiffness and reduces bending under load. The fully ground shank improves runout and seating in the chuck, which is especially valuable for precision assemblies and toolroom work. This short twist drill is therefore well suited to stations where rigidity and repeatability are required, for example toolmaking, repair shops and production cells. Practical guidance and maintenance for long service life The Type N normal spiral and HSS‑G designation mean the bit is ground (not rolled) for sharp cutting edges and high concentricity; however the brittle quality of ground HSS recommends controlled feeds, appropriate cutting fluid and moderate speeds. Regrinding is straightforward because of the standard geometry. For best results use coolant when drilling deep or tough alloys and avoid excessive feed spikes to reduce breakage risk. Strong recommendation: The MetavCUT Short HSS‑G Twist Drill is ideal for precision metalworking — for personalised advice or additional technical data please contact METAV Werkzeuge: info@metav-werkzeuge.com; Tel +49 2822 7131930; WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 45059-FDA Diameter: 5.9 mm Tip angle: 135° Type: Type N Execution: Short Colour/Finish: Bright finish Material: HSS-G Spiral length: 57 mm Overall length: 93 mm Shank design: Fully ground Model series: Standard Line Application: Drills for metal Standard: DIN 338 For use with: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What makes the MetavCUT Twist Drill suitable for hard metals? The MetavCUT Twist Drill in Short HSS‑G execution combines a 135° tip and ground cutting geometry that reduce wandering and improve chip formation, making this Type N drill particularly effective when working in hard or alloyed steels and cast materials. Can the MetavCUT Twist Drill be used in handheld drills and machines? Yes, the MetavCUT Short Twist Drill is designed for use with both portable and stationary Drilling Machines; the short overhang and fully ground shank improve stability and concentricity when clamped in chucks. What are Twist Drills mainly used for? Twist Drills are primarily employed for machining high‑strength materials and larger drill diameters; their shape is easy to regrind and they withstand substantial loads. Which three drill types exist? The three main drill families are Metal drills, Wood drills and Stone/Concrete drills.
6.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short, 6.1 mm, 135° tip, HSS‑G, Bright Finished (DIN 338) The Twist Drill short Type N is a precision Drilling Machine bit designed for stable, fast metalworking, especially suited to hardened materials and demanding workshop applications. Short design for increased rigidity and accuracy Sharp 135° tip for harder materials HSS‑G ground for clean, concentric holes Fully ground shank for excellent runout accuracy Conforms to DIN 338 for short twist drills Engineered for higher drilling performance in metalworking This short Twist Drill from MetavCUT delivers a performance-oriented solution for metal fabrication: the HSS‑G material and optimized geometry enable faster material removal with reduced drilling forces. The ground flute geometry creates very sharp cutting edges that produce clean, precise holes and reduce burr formation. For craftsmen and production workshops, this means shorter cycle times and more reliable hole quality when processing legierte and unlegierte steels, cast steels and non‑ferrous metals. Short length increases rigidity and improves accuracy A reduced overall length significantly reduces the cantilevered section protruding from the chuck, which increases stability and lowers the risk of bending under load. This makes the short Type N Twist Drill particularly suitable for precise operations on a Drilling Machine and for drilling in hard materials where deflection would compromise hole accuracy. Operators will notice improved concentricity and less chatter compared with longer tools. Ground HSS construction explained and practical benefits The designation HSS‑G (ground High Speed Steel) denotes that the flute geometry is produced by CNC grinding rather than rolling. This results in extremely sharp cutting lips and high dimensional accuracy, which is advantageous for demanding metalworking. A potential drawback is higher brittleness compared with rolled variants, so use with appropriate coolant and in a stable clamping setup for best results. The 135° tip angle is chosen to reduce initial cutting forces and to suit harder materials such as stainless steel. Where this tool is most effective and who benefits Workshops, toolrooms and industry professionals who require repeatable, precise holes in metals will find the Twist Drill short Type N especially useful. The design targets applications up to typical diameters and depths encountered in component manufacture, repair and assembly. Its characteristics make it a rational choice for tasks requiring tight tolerances and reliable hole geometry rather than for soft‑wood or masonry applications. For precision metal drilling, choose the MetavCUT Twist Drill short Type N — METAV Werkzeuge offers expert advice and technical support at info@metav-werkzeuge.com or by phone +49 2822 7131930; WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 45061-FDA Diameter: 6.1 mm Total length: 93 mm Spiral length: 57 mm Tip angle: 135° Type: Type N Material: HSS‑G (ground High Speed Steel) Finish/Colour: Bright finished Execution: Short Shank: Fully ground For use in: Drilling Machine (Handheld Drilling Machines not recommended for highest precision) Standard: DIN 338 Model series: Standard Line Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill short Type N suitable for? The MetavCUT Twist Drill short Type N is intended primarily for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics thanks to its HSS‑G construction and 135° tip. Is coolant recommended when using the MetavCUT Twist Drill Type N? Using coolant or cutting fluid with the MetavCUT Twist Drill short Type N is recommended for prolonged tool life and improved chip evacuation, especially when drilling harder materials and when aiming for the best surface finish and dimensional stability. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high‑strength materials and large hole diameters. Its form allows relatively easy re‑grinding and it endures higher loads, which makes it suitable for tasks requiring robustness and repeatable performance. Which three drill types exist? The three primary drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills re‑pointed? Re‑pointing reduces the cross‑cut at the tip of a Twist Drill. By re‑sharpening the point, friction forces are significantly lowered, which reduces required feed forces and improves centring in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but the guidance is worse and the hole finish is less clean. Metal drills are easier to re‑sharpen and exhibit less self‑feeding in soft materials. At which drilling depths is the Twist Drill most commonly used? The Twist Drill is the most used tool for through drilling. For diameters up to around 20 mm and drilling depths up to 100 mm, the Twist Drill is commonly employed. Is HSS or HSSE better? The general belief that HSSE steels are universally superior to HSS is incorrect. When choosing between HSS and HSSE for a MetavCUT Twist Drill Type N, assess whether your working conditions justify the higher cost of HSSE for your specific application.
6.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die kompakte Kombination aus HSS‑G Material, geschliffenem Schaft und 135° Spitzenwinkel liefert schnelle, präzise Bohrungen in Stahl bei hoher Rundlaufgenauigkeit. Bestellen Sie den Spiralbohrer 6,25 mm von MetavCUT direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 6,25 mm HSS‑G Kurz (Typ N) — MetavCUT, SKU 450625-FDA Der Spiralbohrer ist ein kurzer, geschliffener HSS‑G Metallbohrer für präzise Bohrungen in legierten und unlegierten Stahl sowie Gusswerkstoffe. Spiralbohrer 6,25 mm HSS‑G, kurz Geschliffener Schaft für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für harte Werkstoffe Spiralänge 63 mm für stabile Spanabfuhr Geeignet für Handbohrmaschine und Stationär Präzision und Effizienz bei harten Werkstoffen Der kurze, geschliffene HSS‑G Kurzbohrer reduziert die Auskraglänge und damit das Verbiegen und Vibrieren während des Bohrens. Dadurch entsteht eine deutlich höhere Stabilität, was besonders bei legierten Stählen und Temperguss wichtig ist. Die geschliffene Geometrie sorgt für sehr scharfe Schneiden und saubere Bohrlöcher, während der 135° Spitzenwinkel das Anbohren in harten Werkstoffen erleichtert und die Anbohrzeit reduziert. Geeignet für Werkstatt und mobile Anwendung Im Standard‑Bereich von 2,0 mm bis 13,0 mm bietet dieser Kurzbohrer ein ausgewogenes Verhältnis aus Handhabung und Leistung. Die Ausführung als Typ N mit normaler Spirale macht ihn prädestiniert für den Einsatz in der Handbohrmaschine ebenso wie in stationären Bohrmaschinen. Bei der Nutzung in mobilen Geräten empfiehlt sich eine stabile Spannaufnahme und moderate Drehzahlen, um die Bruchsicherheit zu erhöhen. Normkonforme Fertigung und Materialeigenschaften Die Herstellung richtet sich nach DIN 338, die kurze Spiralbohrer mit Zylinderschaft normiert. Die Kombination aus HSS‑G und geschliffenem Schaft bedeutet: hohe Schneidleistung und exakte Rundlaufwerte. Geschliffene Bohrer bieten feinste Schneidkanten und enge Toleranzen; sie sind jedoch empfindlicher gegenüber Schockbelastungen, weshalb Kühlung und gleichmäßiger Vorschub empfohlen werden. Anwendungshinweise und arbeitssicherheit Für optimale Ergebnisse wird die Verwendung von Schneidöl oder Kühlmittel empfohlen, besonders beim Bohren in gehärtetem Stahl. Vorbohren ist bei sehr dicken oder zähen Werkstoffen empfehlenswert, um die Querschneide zu entlasten. Die kurze Spiralänge von 63 mm unterstützt die Spanabfuhr bei üblichen Bohrtiefen; bei tiefen Sacklochbohrungen sind abgestufte Aufbohrschritte zu erwägen, um Überhitzung und Spanverwicklung zu vermeiden. MetavCUT empfiehlt diesen HSS‑G Kurzbohrer für präzise Metallbohrungen; bei Fragen zur Einsatzoptimierung erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 450625-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Typ: Typ N Fakten Durchmesser: 6,25 mm Gesamtlänge: 101 mm Spirallänge: 63 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaft Ausführung: geschliffen (vollständig geschliffener Zylinderschaft) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich der Bohrer am besten? Der Kurzbohrer von MetavCUT (Spiralbohrer 6,25 mm, Typ N, SKU 450625-FDA) eignet sich besonders für legierte und unlegierte Stähle, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe aufgrund des HSS‑G Werkstoffs und des 135° Spitzenwinkels. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die Ausführung ist für die Nutzung in der Handbohrmaschine geeignet; dennoch ist auf eine feste Spannaufnahme und moderate Drehzahl zu achten, damit der geschliffene Bohrer nicht durch seitliche Kräfte beschädigt wird. Warum ist geschliffener HSS besser für Metallbohrungen? Geschliffene HSS‑Bohrer bieten sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher erzeugt. Beim Spiralbohrer MetavCUT bedeutet das bessere Oberflächenqualität, allerdings erhöhte Empfindlichkeit gegen Stoßbelastungen. Ist Kühlung beim Bohren mit diesem Bohrer erforderlich? Bei harten oder dicken Werkstoffen wird Kühlung oder Schneidöl empfohlen, um Überhitzung zu vermeiden und die Standzeit des HSS‑G Bohrers zu verlängern. Dies gilt insbesondere bei stationärem Einsatz und höheren Vorschubkräften. Benötigt man Vorbohren für größere Bohrtiefen? Bei tiefen Bohrungen oder zähen Werkstoffen empfiehlt sich Vorbohren oder mehrstufiges Aufbohren zur Entlastung der Querschneide; der Kurzbohrer ist für typische Anwendungen im Standard‑Bereich konzipiert.
6.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G Drill, 6.2 mm, 135° Point, Bright Finished, Fully Ground, DIN 338 — MetavCUT The Twist Drill (Type N) is a short HSS‑G drill designed for precise metalworking tasks on drilling machines and hand drills, optimised for hard materials and stable, accurate hole creation. Short design for higher stability 6.2 mm diameter for precise holes 135° point angle for hard materials Fully ground HSS‑G for sharp, accurate cuts Conforms to DIN 338 for industrial compatibility High performance for demanding metal drilling Built to deliver measurable productivity, this Twist Drill in HSS‑G quality combines a short overall length with a fully ground geometry to reduce vibration and improve centring. The 135° Point Angle eases penetration into harder metals such as stainless steel, while the CNC grinding of the flutes yields very sharp cutting edges and excellent runout accuracy. As a result, users experience up to 40% faster drilling and require 50% less feed force compared with conventional HSS variants, making this tool a rational choice where efficiency and repeatability matter. Short geometry that increases stability and precision A shorter projection from the chuck significantly reduces lever forces and deflection during drilling. The short design is therefore particularly suitable for operations where tight tolerances and straight, burr‑reduced holes are required. Because the flutes and cutting lips are produced by grinding rather than rolling, the drill achieves a cleaner hole surface and better dimensional consistency, especially when used with appropriate coolant and stationary or well‑supported setups. Material and cutting geometry explained for every user The HSS‑G (ground high speed steel) construction provides a balance of hardness and toughness for machining a wide range of metals. The designation Type N denotes the classic normal helix geometry tailored for metalworking; it is not optimised for soft timbers. Compliance with DIN 338 ensures standardised dimensions and shank form for easy mounting in chucks and toolholders. For less experienced users: a larger point angle reduces the tendency to wander on tough surfaces and shortens the time to break through the material. Where this drill delivers the most value This short Twist Drill is aimed at professional workshops and maintenance teams that work with alloyed and unalloyed steels, cast materials, non‑ferrous metals and hard plastics. It excels in jobs on bench drills and machine tools where stiffness is available and precise hole geometry is required. If the work involves deep, flexible setups or timber, consider dedicated long‑form or wood drills instead to match the application. MetavCUT recommends this Type N short HSS‑G Twist Drill for precision metalwork — for technical advice or to check suitability for a specific task, contact METAV Werkzeuge: info@metav-werkzeuge.com • Phone +49 2822 7131930 • WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill (Short) Brand: MetavCUT SKU: 45062-FDA Diameter: 6.2 mm Point Angle: 135° Type: Type N Material: HSS‑G (ground high speed steel) Finish/Colour: Bright Finished Shank Execution: Fully Ground Overall Length: 101 mm Spiral Length: 63 mm Application: Drills for Metal / Drilling Machine / Hand Drill use Norm: DIN 338 Execution: Short Model Series: Standard Line Shaft Treatment: Geschliffen (ground) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Type N short drill? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is well suited to alloyed and unalloyed steels, cast materials, non‑ferrous metals and hard plastics, offering reliable centring and clean hole walls when used on drilling machines or supported hand drills. Why choose a short Twist Drill like the MetavCUT Type N for precision work? A short Twist Drill reduces overhang and bending, improving stability and rotational accuracy; the ground geometry of the MetavCUT Type N gives sharp cutting edges that help achieve precise diameters and reduce burr formation. For what is a Twist Drill mainly used? A Twist Drill is primarily applied in the machining of high‑strength materials and for larger hole diameters; its ground form is easy to sharpen and withstands greater loads, making it suitable for difficult metalworking tasks. Which three drill types exist? There are three main drill categories: Metal drills, Wood drills, Stone/Concrete drills. Why are Twist Drills points de‑pointed (split)? Splitting the point reduces the cross‑edge at the tip, lowering friction and therefore the required feed force; it also improves centring of the tip in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill can be used in wood, but guidance is poorer and hole finish is less clean; metal drills are easier to resharpen and have a lower self‑feed tendency compared with dedicated wood drills. At which drilling depths is the Twist Drill most commonly used? Twist Drills are typically used for through‑hole drilling; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill remains the most commonly employed tool. Is HSS or HSSE better? The general assumption that HSSE is categorically superior to HSS is not universally correct; when choosing, evaluate whether the working conditions justify the higher cost of HSSE for your specific application.
6.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, Ø 6.3 mm, 135° point, Bright finished, Fully ground, DIN 338, HSS‑G by MetavCUT The Twist Drill Type N short is a precision metal‑drilling bit with a 6.3 mm diameter and a 135° point angle, designed for stable, high‑accuracy work in hand drills and drilling machines. Short Type N Twist Drill for high stability Ø 6.3 mm HSS‑G fully ground cutting geometry 135° point angle for hard metals like stainless steel Fully ground shank ensures high concentricity Conforms to DIN 338 for metal drilling Reliable stability and precision for demanding metal jobs The short design of this Twist Drill delivers increased Stability and reduced deflection during drilling, which is particularly valuable when working with hard or thick metals. Because the Out‑of‑chuck length is shorter than standard bits, vibration is minimised and the tool gives a more concentric hole. This construction makes the bit especially suitable for precise setups on a drill press or for accurate handheld operations where hole quality matters. The fully ground geometry ensures sharp cutting edges and consistent hole diameters. Faster penetration and lower feed forces in hard materials A 135° Point Angle reduces the tendency to wander and shortens the initial penetration phase on tough substrates. Combined with the HSS‑G (ground high‑speed steel) material, the bit requires noticeably less feed force, improving operator comfort and control. These features support efficient machining in alloyed and unalloyed steel, cast steel, grey iron, sintered iron and many non‑ferrous metals, enabling cleaner holes and longer tool engagement before loss of edge. Suited applications and who benefits most This Type N short Twist Drill is designed for professional metalworkers, toolroom staff and maintenance technicians who need reproducible, high‑quality holes in metals. It works well in both stationary drilling machines and robust hand drills for repair, assembly and fabrication tasks. The drill is optimised for metalworking scenarios rather than soft timber or masonry, offering a reliable choice where precision and repeatability are priorities. Material, manufacturing and care for longer tool life Being HSS‑G means the flute geometry and cutting edges are produced by CNC grinding rather than rolling, giving sharper edges and superior roundness, though with slightly higher brittleness. For best results use cutting fluid or coolant when machining steels, and avoid heavy interrupted cuts without support. The fully ground shank improves runout performance in chucks and collets and allows for easier regrinding when the geometry permits; regrinding should follow the original geometry to maintain the 135° point behavior and drilling quality. Strong recommendation: choose the MetavCUT Twist Drill Type N short for precision metal drilling and contact METAV Werkzeuge for tailored advice and technical support — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT Model Series: Standard Line Diameter: 6.3 mm Spiral Length: 63 mm Overall Length: 101 mm Point Angle: 135° Type: Type N Execution: short Colour/Finish: bright finished Shank Execution: fully ground Material: HSS‑G Standard: DIN 338 Suitable for: Drilling Machine, Hand Drill Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill Type N short? The MetavCUT Twist Drill Type N short is primarily used for machining metal; it excels in drilling alloyed and unalloyed steel, cast steel, gusseisen, sintered iron and many non‑ferrous metals. Its short construction and ground geometry make it particularly effective for high‑precision metal holes and demanding industrial tasks. Which three drill types exist? Commonly distinguished drill types are Metal drills, Wood drills, and Masonry/Stone drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for machining a wide range of metallic materials.
6.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Bauweise und geschliffene HSS-G Qualität sorgen für präzise Bohrbilder und geringeren Kraftaufwand; nutzen Sie die Kombination aus Stabilität, schneller Schnittleistung und Normkonformer Ausführung für zuverlässige Metallbearbeitung. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer kurz, HSS-G, 6,4 mm von MetavCUT Der Spiralbohrer kurz bietet präzises Bohren in Metall bei hoher Stabilität und reduziertem Anpressdruck für stationäre und handgeführte Anwendungen. Kurze Ausführung für höhere Stabilität Geschliffen: hohe Rundlaufgenauigkeit 135° Spitzenwinkel für härtere Werkstoffe Geeignet für Handbohrmaschine und Werkbankbetrieb DIN 338 konform für kurze Spiralbohrer Hohe Stabilität für präzise Metallbohrungen Die kurze Ausführung reduziert die Auskraglänge und minimiert somit Vibrationen und Biegung beim Bohren in Stahl und Guss. Durch die verringerte Hebelwirkung bleibt die Bohrung maßhaltiger, was besonders bei präzisen Passungen und wiederholten Bohrungen Zeit spart. Die Bauweise empfiehlt sich für Einsatzfälle, in denen Stabilität und sauberer Werkstückrand entscheidend sind. Effiziente Schnittleistung bei geringerem Kraftaufwand Der HSS-G geschliffen garantiert sehr scharfe Schneiden und eine schnelle Spanabfuhr; dies ermöglicht bis zu 40 % schnellere Schnittgeschwindigkeit und benötigt bis zu 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Der 135° Spitzenwinkel reduziert das Auslaufen beim Anbohren härterer Werkstoffe und verkürzt die Anbohrzeit, was die Produktivität in Werkstatt und Produktion erhöht. Vielseitiger Einsatzbereich für Metallbearbeitung Mit einem Durchmesser von 6,4 mm fällt der Bohrer in den Standard-Bereich und ist ideal für Werkstatt, Montage und DIY-Projekte. Er eignet sich zum Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetallen und Hartkunststoffen. Die Kombination aus Typ N Normalspirale und kurzer Länge macht den Bohrer zu einer guten Wahl für schnelle, wiederholbare Bohrungen. Geschliffene Fertigung: Präzision trifft auf Handhabungshinweis Die geschliffene Schaft- und Nutgeometrie erzeugt sehr hohe Rundlaufgenauigkeit und saubere Bohrlöcher, ideal für hohe Ansprüche an Maßhaltigkeit. Geschliffene Bohrer können im Vergleich zur gewalzten Variante etwas spröder sein; deshalb empfiehlt sich bei intensiver Nutzung ausreichend Kühlung und, wenn möglich, stationärer Betrieb zur Reduktion von Bruchrisiken. Sichern Sie sich den Spiralbohrer von MetavCUT (SKU 45064-FDA) für präzise Metallbearbeitung bei Metav Werkzeuge — bei Fragen erreichen Sie uns per E‑Mail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 Produktmerkmale Bezeichnung: Spiralbohrer Hersteller: MetavCUT Serie: Standard Line Norm: DIN 338 SKU: 45064-FDA Ausführung: kurz Farbe: blank Schaftausführung: geschliffen Material: HSS-G Typ: Typ N Für Bohrmaschine: Handbohrmaschine Fakten Durchmesser: 6,4 mm Gesamtlänge: 101 mm Spirallänge: 63 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Stück Besonderheiten HSS-G (geschliffen) für scharfe Schneiden und hohe Präzision Schaft geschliffen (CNC-Schliff): hohe Rundlaufgenauigkeit Typ N (Normalspirale): klassisches Metall-Bohrverhalten DIN 338: Klassifizierung kurzer Spiralbohrer mit Zylinderschaft FAQ Für welche Materialien ist dieser Bohrer geeignet? Der Spiralbohrer von MetavCUT (SKU 45064-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Spiralbohrer kurz aus der Standard Line von MetavCUT ist für den Einsatz in Handbohrmaschinen geeignet, wobei die kurze Bauform für bessere Stabilität bei Handführung sorgt. Was bedeutet HSS-G und welchen Vorteil bietet es? HSS-G steht für Schnellarbeitsstahl geschliffen; der geschliffene Bohrer liefert schärfere Schneiden und hohe Rundlaufgenauigkeit, was sauberere Bohrlöcher und bessere Maßhaltigkeit ermöglicht. Warum ist der 135° Spitzenwinkel vorteilhaft? Der 135° Spitzenwinkel reduziert das Wandern beim Anbohren und verbessert das Eindringen in härtere Werkstoffe, wodurch die Anbohrzeit verkürzt und die Oberflächenqualität verbessert wird. Welche Verpackungseinheit ist verfügbar? Der Spiralbohrer von MetavCUT (SKU 45064-FDA) wird in einer Verpackungseinheit von 10 Stück geliefert.
6.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombination aus kurzer Ausführung, HSS-G und 135° Spitzenwinkel sorgt für stabile, präzise Bohrungen in harten Werkstoffen. Bestellen Sie den Spiralbohrer direkt über Metav oder nutzen Sie die Beratung bei technischen Fragen. Spiralbohrer – kurzer HSS-G Metallbohrer von MetavCUT Spiralbohrer ist ein geschliffener HSS-G Metallbohrer in kurzer Ausführung für präzise Bohrungen in Stahl, Gusseisen und Nichteisenmetallen. Spiralbohrer von MetavCUT, HSS-G geschliffen Kurze Ausfuhrung für erhöhte Stabilität Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Geschliffene Spirale für präzise, saubere Bohrlöcher Höchste Präzision und Stabilität beim Bohren Die kurze Ausfuhrung reduziert die Auskraglänge und minimiert damit das Verbiegen des Bohrers, was insbesondere bei mittleren Durchmessern zu deutlicher Präzision bei Bohrbildern führt. Durch die geschliffene Schaft- und Spiralengeometrie wird der Rundlauf verbessert, sodass saubere Bohrlöcher mit reproduzierbaren Durchmessern erzielt werden. Dieser Vorteil macht den Spiralbohrer zur ersten Wahl, wenn es auf Passgenauigkeit und definierte Bohrqualität ankommt. Schneidstoff und Spitze für schnelleres Arbeiten Der Einsatz von HSS-G (geschliffen) erlaubt höhere Schnittgeschwindigkeiten und schärfere Schneidkanten; dadurch sind bis zu 40 % schnelleres Bohren und etwa 50 % geringere Anpresskraft erreichbar gegenüber älteren HSS-Ausführungen. Der 135° Spitzenwinkel unterstützt das Anbohren harter Werkstoffe wie Edelstahl und Temperguss, weil die Anlaufkräfte verteilt werden und das Reiben reduziert bleibt. Diese Kombination sorgt für wirtschaftliche Fertigungszeiten bei gleichbleibender Bohrbildqualität. Einsatzgebiete, Maschinen und Materialempfehlung Mit einem Durchmesser von 6,5 mm fällt der Bohrer in den Standard-Bereich und eignet sich besonders für Werkstatt, Montage und allgemeine Metallbearbeitung. Einsatzgebiete sind das Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff. Der Spiralbohrer ist für Handgeführte Akkubohrschrauber ebenso geeignet wie für stationäre Säulenbohrmaschinen, wobei bei tieferen Löchern und hohen Serien bessere Spanabfuhrmaßnahmen zu empfehlen sind. Normenkonformität und Verarbeitung Die Fertigung nach DIN 338 klassifiziert den Bohrer als kurze Spiralbohrerausführung mit Zylinderschaft; die geschliffene Ausführung (HSS-G) steht für hohe Rundlaufgenauigkeit und scharfe Schneiden. Geschliffene Bohrer sind oft spröder als walzgewalzte Typen, daher empfiehlt sich der Einsatz bevorzugt an stationären Maschinen mit Kühlung. Die Ausführung als Typ N bedeutet Normalspirale, klassisch abgestimmt auf Metallbearbeitung. Empfehlung: Für präzise Metallbohrungen die HSS-G Ausführung von MetavCUT wählen und bei Fragen den technischen Kundendienst von Metav kontaktieren: info@metav-werkzeuge.com oder ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 45065-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 338 Fakten Durchmesser: 6,5 mm Gesamtlänge: 101 mm Spirallänge: 63 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen Typ: Typ N (Normalspirale für Metall) Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Farbe: blank (bright finished) FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS-G Ausführung und mit 135° Spitzenwinkel eignet sich gut für die Bearbeitung von Edelstahl und anderen harten Werkstoffen, da die Spitze das Anbohren erleichtert und die geschliffene Geometrie saubere Bohrbilder liefert. Welche Maschinen sind für den Einsatz des Bohrers geeignet? Der kurze Spiralbohrer ist für Handbohrmaschine und stationäre Säulenbohrmaschinen ausgelegt; für tiefe Bohrungen oder Serien empfiehlt sich eine stationäre Maschine mit Kühlung und kontrollierter Spanabfuhr. Was bedeutet HSS-G und welchen Vorteil bietet es? HSS-G steht für geschliffenen Schnellarbeitsstahl; diese Fertigungsart erzeugt sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was präzise und saubere Bohrlöcher ermöglicht, dabei aber eine sorgfältige Handhabung und Kühlung erfordert. Welche Norm gilt für diesen Bohrer und warum ist das wichtig? Die Einhaltung der DIN 338 zeigt, dass es sich um eine kurze Spiralbohrerausführung mit Zylinderschaft handelt; das schafft Vergleichbarkeit bei Abmessungen und Toleranzen und erleichtert den Einsatz in definierten Fertigungsprozessen.
6.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombination aus kurzer Ausführung und HSS-G sorgt für mehr Stabilität und höhere Schneidleistung beim Bohren in Stahl; Präzise Bohrbilder und schnelle Spanabfuhr machen den Einsatz in Werkstatt und Industrie effizient. Bestellbar direkt über Metav mit technischer Beratung per eMail oder Telefon. Spiralbohrer von MetavCUT (kurze Ausführung, HSS-G) Der Spiralbohrer ist als kurze, geschliffene Ausführung für präzise Metallbohrungen konzipiert und eignet sich besonders für Stahl, Guss und Nichteisenmetalle. Kurze Ausführung für höhere Stabilität Geschliffene HSS-G Oberfläche für scharfe Schneiden 135° Spitzenwinkel für harte Werkstoffe Zylinderschaft gemäß DIN 338, rollstabil Geeignet für Handbohrmaschine und stationäre Maschinen Mehr Stabilität durch kurze Bauform für präzisere Ergebnisse Die kurze Ausführung reduziert die Auskraglänge und verringert damit Vibrationen und Verformung beim Bohren. Das bedeutet ein ruhigeres Laufverhalten, geringere Ausschläge und sauberere Bohrlöcher. Bei der Bearbeitung von Stahl und Temperguss führt die höhere Steifigkeit zu gleichmäßigeren Bohrdurchmessern und reduziert den Bedarf an Nacharbeiten. Effiziente Schneidleistung dank HSS-G und 135° Spitzenwinkel Das Material HSS-G kombiniert Zähigkeit mit hoher Warmhärte, die geschliffene Oberfläche sorgt für sehr scharfe Kanten. In Kombination mit dem 135° Spitzenwinkel ergibt sich eine schnellere Anbohrung bei harten Werkstoffen und eine bis zu 40 % höhere Vorschubleistung bei reduziertem Anpressdruck. Bei stationärem Einsatz empfiehlt sich Kühlung, um Standzeit und Oberflächenqualität zu optimieren. Praktische Einsatzfelder und Maschinenkompatibilität Mit einem Durchmesser im Standard-Bereich ist dieser Bohrer ideal für Werkstatt, Montage und allgemeine Metallbearbeitung. Er eignet sich für Dünn‑ bis Mittelbleche, Profile, Aluminium und diverse Stahlgüten. Für tiefe Sacklochbohrungen oder sehr dünnwandige Bauteile sollten alternative Verfahren oder Vorbohrungen geprüft werden, um Bruch und Versatz zu vermeiden. Normkonformität, Schaft und Anwendungshinweise für saubere Löcher Die Ausführung entspricht DIN 338 als kurzer Spiralbohrer mit Zylinderschaft; die geschliffene Schaftausführung sorgt für hohe Rundlaufgenauigkeit. Empfehlung: Vorbohren bei Bedarf, geeignete Kühlschmierstoffe verwenden und bei stationären Maschinen moderate Schnittgeschwindigkeiten wählen, um die Lebensdauer zu maximieren. Setzen Sie auf den MetavCUT Spiralbohrer in kurzer Ausführung für zuverlässige Stahlbohrungen — Bestellungen und technische Beratung direkt bei Metav: info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 45066-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 338 Fakten Durchmesser: 6,6 mm Gesamtlänge: 101 mm Spirallänge: 63 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen, hohe Schärfe) Schaftausführung: geschliffen (Zylinderschaft, hohe Rundlaufgenauigkeit) Ausführung: kurz (reduzierte Auskraglänge) Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine Farbe: blank (bright finished) FAQ Für welche Materialien eignet sich der Bohrer besonders? Der MetavCUT Spiralbohrer aus HSS-G ist besonders geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und harte Kunststoffe; die Kombination aus geschliffener Geometrie und 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe. Ist der Bohrer für handgeführte Akkubohrmaschinen geeignet? Ja, der Bohrer ist für die Nutzung in Handbohrmaschine geeignet; aufgrund der kurzen Ausführung empfiehlt sich dennoch eine stabile Maschinenführung und gegebenenfalls Anpunkten, um Wandern beim Anbohren zu vermeiden. Welche Vorteile bietet die geschliffene Ausführung gegenüber rollgewalzten Bohrern? Geschliffene HSS-G Bohrer liefern sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was sauberere Bohrbilder und präzisere Passungen ermöglicht; als Nachteil ist erhöhte Sprödigkeit möglich, daher ist Kühlung und stationärer Einsatz vorteilhaft. Wie verhält sich der Bohrer bei tiefen Bohrungen? Bei Bohrungen, die deutlich tiefer als das Fünffache des Durchmessers sind, kann die Spanabfuhr kritisch werden; für tiefe Löcher sind gestufte Aufbohrverfahren oder spezielle lange Ausführungen empfehlenswert. Welche Norm und Serie hat das Produkt? Der Bohrer entspricht DIN 338 und gehört zur Standard Line von MetavCUT; die Artikelnummer lautet 45066-FDA.
6.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Bauweise und geschliffene HSS‑G Geometrie sorgen für präzise Bohrbilder und reduzierte Vibration; die kurze Ausführung erhöht die Stabilität bei harten Werkstoffen. Nutzen Sie die Kombination aus Schnittleistung und Führungssicherheit für zuverlässige Metallbearbeitung und bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT – kurzer HSS‑G Metallbohrer Der Spiralbohrer ist eine kurze HSS‑G Ausführung für präzises Bohren in legierten und unlegierten Stahl sowie Gusswerkstoffe. Kurze Ausführung für hohe Stabilität HSS‑G geschliffen für scharfe Kanten Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft nach DIN 338 Geeignet für Handbohrmaschine und stationäre Maschinen Stabile Konstruktion für exakte Bohrungen und lange Standzeit Die kurze Auskraglänge reduziert Schwingung und erhöht die Stabilität beim Eindringen in harte Materialien. Durch die geschliffene Schaftausführung entsteht eine sehr gute Rundlaufgenauigkeit, was zu sauberen Bohrlöchern und geringer Nachbearbeitung führt. Für Anwender bedeutet das weniger Werkzeugwechsel, gleichmäßige Passungen und eine bessere Fertigungsqualität bei Serien in kleiner bis mittlerer Losgröße. HSS‑G Material: Schnellere Schnitte bei geringerer Anpresskraft Das HSS‑G Material kombiniert hohe Härte mit zäher Zähigkeit und ermöglicht deutlich höhere Schnittgeschwindigkeiten als Standard HSS. Die geschliffene Geometrie sorgt für scharfe Schneidkanten, was bis zu 40 % schnellere Bohrungen und bis zu 50 % geringere Anpresskraft erlaubt. Damit lassen sich legierte Stähle, Gusseisen und Nichteisenmetalle effizient bearbeiten, ohne unnötig viel Wärme in das Werkstück einzubringen. Präzise Geometrie und Spitzenauslegung für harte Werkstoffe Der Spitzenwinkel 135° ist speziell auf schwer zerspanbare Werkstoffe ausgelegt und reduziert das Ausreißen beim Anbohren. Die Normalspirale Typ N bietet einen ausgewogenen Spantransport und eignet sich gut für die Bearbeitung von Stahl und Eisen. Anwender profitieren von einem schnellen Anbohren und gleichmäßigem Spanabfluss, was die Standzeit der Schneide positiv beeinflusst. Einsatzgebiet und Maschinentauglichkeit im Überblick Die kurze Ausführung wurde für den Einsatz an Handbohrmaschine und stationären Maschinen konzipiert und ist nach DIN 338 klassifiziert, wodurch sich eine verlässliche Maßhaltigkeit und Austauschbarkeit ergibt. Für Serienbearbeitung an Säulenbohrmaschinen oder für präzise Werkstattaufgaben ist dieser Kurzbohrer eine wirtschaftliche Wahl, sofern Kühlung und geeignete Drehzahlen beachtet werden. Empfehlen wir die MetavCUT Standard Line HSS‑G Kurzbohrer für professionelle Metallbearbeitung; für Verfügbarkeit und persönliche Beratung erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 450675-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Fakten Durchmesser: 6,75 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Stück Besonderheiten Material: HSS‑G (G = geschliffen) Schaftausführung: geschliffen (Zylinderschaft) Typ: Typ N (Normalspirale für Metall) Einsatz: Handbohrmaschine / stationäre Maschine Farbe: blank Normhinweis: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der MetavCUT Spiralbohrer in HSS‑G Ausführung wurde für legierte und unlegierte Stähle, Gussstahl, Gusseisen sowie Nichteisenmetalle entwickelt und bietet mit 135° Spitzenwinkel besonders gute Ergebnisse bei harten Werkstoffen. Kann der Spiralbohrer mit einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer ist für die Nutzung an Handbohrmaschine geeignet; die kurze Ausführung erhöht die Stabilität und reduziert das Risiko von Verbiegen bei Handbetrieb. Was bedeutet HSS‑G und welchen Vorteil bietet es? HSS‑G steht für Schnellarbeitsstahl geschliffen; die geschliffene Geometrie liefert sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was präzise Bohrbilder und schnellere Bohrprozesse ermöglicht. Wie unterscheidet sich diese Ausführung von einem langen Bohrer? Die kurze Ausführung reduziert Schwingung und erhöht die Führung, wodurch präzisere Löcher und längere Standzeiten bei hartem Material erzielt werden im Vergleich zu Langbohrern mit größerer Auskraglänge. Ist die Artikelnummer 450675-FDA relevant für die Bestellung? Ja, die SKU 450675-FDA identifiziert genau diesen MetavCUT Spiralbohrer in der Standard Line und vereinfacht Nachbestellungen und Rückfragen.
6.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — short HSS‑G, 6.7 mm, 135° (Type N, DIN 338), bright‑finished A Twist Drill from MetavCUT for precise metal drilling in Drilling Machines, optimised as a short execution for stability and clean holes. Short design for high drilling stability HSS‑G ground geometry for sharper cutting edges 135° point angle suited to harder materials Fully ground shank for improved concentricity Manufactured to DIN 338 for short twist drills Precision and strength for demanding metalwork The Twist Drill in HSS‑G combines a hardened cutting geometry with a 135° point angle to improve entry into tougher materials. With a diameter of 6.7 mm, this Type N drill offers the classic normal spiral geometry that is particularly effective for metalworking. The ground flute profile produces consistent chips and clean bore finishes, so holes in alloyed and unalloyed steel, cast materials and non‑ferrous metals show reduced burring and improved dimensional accuracy. Short length for greater stability and faster operation Designed as a short execution, the spiral length of 69 mm and an overall length of 109 mm limit overhang and minimise bending. This higher rigidity translates into more stable drilling and better concentricity when used in Drilling Machines. The ground HSS construction enables significantly increased feed performance — the manufacturer notes drilling speeds up to 40% faster and reduced required feed force — making the tool ideal where rapid, accurate holes in hard materials are required. Ground geometry and conformity to standards for predictable results The fully ground manufacture (HSS‑G) creates sharp cutting edges and high run‑out accuracy, while the Type N normal spiral provides reliable chip evacuation for metal applications. Conformance with DIN 338 means the drill adheres to standardised dimensions and tolerances for short twist drills with cylindrical shanks. For workshop use, the ground design improves centre accuracy but can be more brittle than rolled variants, hence machining with appropriate coolant and controlled feed is recommended. Best uses, material compatibility and handling recommendations This short Twist Drill is intended primarily for metal: alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast components, Non‑Ferrous Metals and Hard Plastics. Use in stationary or mobile Drilling Machines is supported; for the best lifetime keep a steady feed, apply suitable cutting fluid and avoid excessive lateral loads. The bright‑finished surface and fully ground shank ensure easy seating in the chuck and consistent concentricity for precision operations. Strong recommendation: MetavCUT Twist Drill Type N for precision metal drilling — METAV Werkzeuge offers expert advice and technical support; contact via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45067-FDA Diameter: 6.7 mm Spiral Length: 69 mm Overall Length: 109 mm Point Angle: 135° Type: Type N Material: HSS‑G (ground) Shank Finish: Fully ground Execution: Short Colour: Bright‑finished Standard: DIN 338 Application: Drills for metal Model Series: Standard Line For Drilling Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the MetavCUT Twist Drill (Type N)? The MetavCUT Twist Drill Type N is primarily used for metalworking; it is designed for drilling high‑strength materials and larger metal diameters where a robust, normal spiral geometry provides consistent chip removal and reliable hole quality. Can the MetavCUT Twist Drill be used for different metals and plastics? The MetavCUT Twist Drill Type N is suitable for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast components, Non‑Ferrous Metals and Hard Plastics, with best results when used with appropriate coolant and controlled feed. For what tasks are Twist Drills used? Twist Drills are mainly applied when machining high‑strength materials and larger bore diameters; their geometry is relatively simple to resharpen and they withstand considerable loads, making them a common choice for robust metal drilling tasks. Which three drill types exist? The three main drill types are Metal Drills, Wood Drills and Masonry/Concrete Drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the web thickness at the tip of the Twist Drill, significantly lowering friction and the required feed force; this also improves centring of the tip in the workpiece for more accurate starts. Can a metal twist drill be used to drill wood? A Metal (HSS) drill can be used in wood, but guidance is poorer and hole edges are less clean; however, metal drills are easier to resharpen and typically exhibit lower self‑feed behaviour.
6.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, 6.8 mm, 135° tip, bright finished, HSS‑G, DIN 338 (MetavCUT) The Twist Drill Type N short is a precision metalworking bit designed for stable, accurate drilling in Drilling Machines and similar equipment. Short design for higher stability 6.8 mm diameter for precise holes 135° tip for hard material starts Fully ground shank for accurate runout HSS‑G ground steel for clean metal drilling Greater precision through reduced overhang and rigidity A shorter flute length reduces the exposed part of the tool, which directly improves stability and minimises deflection during cutting. This design makes the short Twist Drill particularly suitable for demanding, precision tasks in metalworking where straight, accurate holes are required. For users who rely on repeatable results, the shorter projection reduces vibration and contributes to consistent hole geometry even in tougher materials. Ground HSS‑G geometry for cleaner holes and faster cutting The HSS‑G (ground) manufacturing method means the spirals and cutting edges are produced by CNC grinding rather than roll forming. This yields very sharp cutting edges and high runout accuracy, producing cleaner bores with less burr. According to manufacturer data, the ground HSS geometry can enable up to 40% faster drilling and may require approximately 50% less feed force compared with conventional HSS bits, which is beneficial when working with alloys or hardened steels. Note that ground tools are more brittle than rolled alternatives, so stationary machines and adequate cooling are recommended. Optimised for metal — clear guidance on suitable materials This Type N short Twist Drill is designed for metal applications and performs well in a range of workpieces such as alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. The 135° tip angle improves penetration and reduces chipping when starting holes in harder materials like stainless steel. For workshop professionals and maintenance technicians, this bit offers a reliable balance between cutting aggressiveness and centring behaviour. Conformity and machine compatibility for safe workshop use Manufactured to DIN 338, the drill corresponds to the standard for short twist drills with cylindrical shanks. The fully ground shank ensures consistent seating in the chuck and reduced radial runout, which is important when using both portable Drilling Machines and stationary machine tools. Technical dimensions: flute length and overall length are specified to support correct selection for the clamping length available in your machine, reducing the risk of excessive overhang. We recommend the MetavCUT short Twist Drill Type N for precision metal drilling — for expert technical advice or to confirm suitability for your application please contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone on +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical Data Designation: Twist Drill (Short Spiral Drill) Marke: MetavCUT SKU: 45068-FDA Diameter: 6.8 mm Tip angle: 135° Type: Type N Execution: short Colour: bright finished Shank execution: fully ground Spiral length: 69 mm Overall length: 109 mm Material: HSS‑G Norm: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill Type N short from MetavCUT? The MetavCUT Twist Drill Type N short is primarily used for precision drilling in metals; its short design and HSS‑G geometry make it ideal for demanding tasks in alloyed and unalloyed steel, cast materials and hard plastics where stability and clean holes are required. Can the MetavCUT Twist Drill be used in hand drills or only in machines? The MetavCUT short Twist Drill Type N is suitable for use in Drilling Machines and can be used in robust hand drills if the chuck and clamping conditions ensure low runout; however, for maximum lifetime and safety, stationary machines with proper cooling are recommended. For what is a Twist Drill used? It is mainly applied to the machining of high‑strength materials and larger drill diameters. The form is easy to grind and withstands higher loads. Which three drill types exist? There are Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills sharpened at the tip? The sharpening reduces the cross‑cut at the tip of the Twist Drill. By sharpening, friction forces are significantly lowered so that lower feed forces are required; at the same time the drill tip is better centred in the workpiece. Can a Twist Drill be used to drill wood? Metal drills can indeed be used in wood. They offer poorer guidance and less clean results than dedicated wood bits, but they are easier to re‑grind and exhibit less self‑feed. For which drilling depths is the Twist Drill most used? A full‑bore hole is usually executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are inherently superior to standard HSS is not universally correct; you should weigh up whether the working conditions justify the higher purchase price before choosing HSSE over HSS.
6.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — 6.9 mm, 135° Point, Type N, Short, Bright Finished, HSS-G, DIN 338 (MetavCUT) A Twist Drill Type N for Drilling Machines, designed to deliver stable, precise holes in hard metals and industrial applications. Short design for increased stability 6.9 mm diameter for precise holes 135° point angle for hard metals Fully ground shank for high runout accuracy Conforms to DIN 338 for consistent quality Exceptional precision and faster machining for metalworking The short-design Twist Drill from MetavCUT combines a reduced overhang with a HSS-G grinding geometry to minimise deflection and improve hole accuracy. This construction enables up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS variants, which translates into shorter cycle times and less operator fatigue in repetitive tasks. The compact flute length and robust body deliver reliable concentricity when used in a properly clamped Drilling Machine, making this tool particularly effective for precision work in alloyed and unalloyed steels. Ground geometry and point angle tailored for hard materials A ground flute geometry (HSS-G) means the cutting edges and chip gullets are produced by CNC grinding, resulting in very sharp cutting lips and excellent surface finish of the hole. The 135° point angle reduces the tendency to wander on hard materials such as stainless steel, shortening the initial penetration time. Type N (Normal Spiral) geometry is optimised for metalworking, so the drill cuts efficiently while maintaining centring properties; for less experienced users, this design also makes resharpening straightforward while retaining cutting performance. Best applications and handling recommendations for reliable results Use this short HSS-G drill primarily for machining Metals on stationary or portable Drilling Machines where rigidity can be ensured. Suitable application ranges include Steel, Cast Iron, Sintered Iron, Non-Ferrous Metals and Hard Plastics. For deeper or larger-diameter holes, select appropriate pecking cycles or coolants to manage chip evacuation; this drill performs particularly well up to typical diameters and depths encountered in workshop settings when used with coolant and correct feeds. Operators benefit from reduced burr formation and cleaner hole edges when using the correct speed and feed for the material. Durability considerations and safe working practice While the ground construction offers superior precision and surface finish, it can be less tolerant to shock loads than rolled variants; therefore, avoid impact or hammer drilling modes and ensure stable clamping in the chuck. Regular cooling and proper feed rates extend tool life and prevent premature breakage. Conformity to DIN 338 assures standardised dimensions and interchangeability, supporting quality control and repeatability in production environments. For demanding or unfamiliar materials, consult technical support to confirm optimal cutting parameters. I recommend MetavCUT’s short Twist Drill for demanding metalworking tasks — for personalised technical advice or to verify suitability, contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45069-FDA Diameter: 6.9 mm Overall length: 109 mm Spiral length: 69 mm Point angle: 135° Type: Type N Execution: short Shank design: fully ground Surface / Colour: bright finished Material: HSS-G Standard: DIN 338 Application: Drills for metal Suitable for: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill is primarily applied to the machining of high-strength materials and larger bore diameters; its short design and ground geometry make it especially suitable for precision drilling in metals such as alloyed and unalloyed steel. This variant is comparatively easy to resharpen and withstands higher loads while delivering clean, accurate holes. Which three drill types exist? There are three main drill families: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the metal-drill category (Type N), optimised for drilling in metallic materials rather than soft wood or masonry.
6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — short HSS‑G Type N, Ø 6 mm, 135° point, bright finished (DIN 338) The Twist Drill is a short HSS‑G Type N drill bit designed for metalworking applications with enhanced stability and a 135° point angle for hard materials. Short design for increased stability 135° point for hard materials HSS‑G ground for precise metal holes Type N normal spiral for steel and iron Conforms to DIN 338 for short twist drills Precision and stability for demanding metalwork The short Twist Drill from MetavCUT is engineered to reduce overhang and vibration, delivering higher stability when drilling into hard materials. Its compact geometry limits deflection, which improves hole accuracy and prolongs tool life when used with appropriate speeds and coolant. The ground flute geometry produces clean chip evacuation and consistent performance in both stationary and portable drilling operations. Faster drilling with lower feed forces A ground HSS‑G geometry allows more aggressive cutting with less effort: up to 40% faster drilling and approximately 50% lower feed force compared with conventional HSS designs under comparable conditions. This combination makes the bit particularly suitable for alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron, non‑ferrous metals and hard plastics. When speed and surface finish matter, the ground cutting edges reliably produce accurate, burr‑reduced holes. Designed for tougher materials and long runs With its 135° point angle, this short Type N bit improves centring and reduces walking on hard or stainless steels, shortening pilot time and improving cycle reliability. The fully ground shank and flute geometry—typical for HSS‑G (G = ground)—create sharp cutting edges and high concentricity, making the bit a strong choice for repeated production drilling where consistent hole quality is required. Practical handling and recommended use The short execution and fully ground cylindrical shank are optimised for use in hand and machine drilling devices such as portable Drilling Machines and stationary drill presses. To avoid premature breakage, employ steady feed, appropriate cutting speeds and coolant when machining hard or heat‑sensitive alloys. The bit is best applied in through‑holes and moderate depths where rigidity and finish are priorities rather than extended reach. Highly recommended: the MetavCUT short HSS‑G Type N Twist Drill for precise metalworking—METAV Werkzeuge offers expert consultation and application support via info@metav-werkzeuge.com or +49 2822 7131930, WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 45060-FDA Diameter: 6 mm Overall length: 93 mm Spiral length: 57 mm Point angle: 135° Type: Type N Execution: short Shank execution: fully ground Material: HSS‑G Colour: bright finished Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger hole diameters; its short design and ground geometry make it suitable for precise drilling in steels, cast materials and hard plastics, providing clean holes and good concentricity. Which three drill types exist? Typical drill categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for steel and similar materials. Why are twist drills pointed? The pointing reduces the cross‑cut at the tip, lowering friction and therefore required feed force; pointed tips also improve centring in the workpiece so the MetavCUT Twist Drill starts more accurately and cuts more efficiently. Can a Twist Drill be used to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but it usually gives poorer guidance and a less clean finish than a dedicated wood bit; however, these drills are simpler to resharpen and exhibit lower self‑feeding behaviour. At which drilling depths is the Twist Drill most commonly used? Twist Drills are the go‑to tool for through holes; they are most frequently applied for diameters up to 20 mm and drilling depths up to 100 mm, making the MetavCUT Twist Drill ideal for such general‑purpose metalworking tasks. What is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is incorrect; the MetavCUT HSS‑G choice should be based on specific working conditions and whether the performance gains justify any higher acquisition cost.
7.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — short HSS-G drill, Ø 7.1 mm, 135° tip, bright finished The Twist Drill Type N is a short HSS-G metal drill designed for precise work in Drilling Machines and hand-operated setups, offering a 135° tip and a fully ground shank for stable, clean bores. Short design for high stability 135° tip for drilling hard metals Fully ground shank for precise centring HSS-G material for clean, durable holes Manufactured to DIN 338 conformity Exceptional stability from a short design Dank der short design reduziert dieser kurze Spiralbohrer das Auslenken deutlich, wodurch die Genauigkeit bei Bohrungen in harten Werkstoffen steigt. Die kürzere Auskraglänge führt zu weniger Vibrationen und verbessertem Rundlauf, besonders bei kleinen Durchmessern wie 7.1 mm. Durch die Kombination aus kompakter Bauart und gezielter Geometrie sind präzise Bohrungen möglich, ohne aufwändige Spannvorrichtungen verwenden zu müssen. Das Ergebnis sind gleichmäßigere Bohrbilder und geringerer Werkzeugverschleiß. Optimised tip and material for hard metals Der 135° tip ist speziell ausgelegt für Materialien mit hoher Festigkeit; er verringert den Anbiss und sorgt für kontrollierten Spanablauf. In Verbindung mit dem HSS-G (geschliffener Schnellarbeitsstahl) verbessert sich die Schnittleistung deutlich, sodass saubere Löcher in legierten und unlegierten Stählen, Gusswerkstoffen sowie Hartkunststoffen erzielt werden. Die geschliffene Geometrie ermöglicht sehr scharfe Schneiden, was die Bohrkraft reduziert und die Arbeitseffizienz erhöht. Intended use and typical applications Dieser kurze Type N Twist Drill wurde primär für Metallbearbeitung in stationären und mobilen Drilling Machines entwickelt. Typische Anwendungen sind Bohrungen in Stahl, Gusseisen, Sintereisen sowie Nichteisenmetallen; auch Hartkunststoffe lassen sich zuverlässig bearbeiten. Durch die robuste Auslegung eignet sich das Werkzeug für Werkstätten, industrielle Instandhaltung und präzise Einzelteilfertigung, wo hohe Maßhaltigkeit und saubere Bohrbilder gefragt sind. Handling, sharpening and operational tips Der vollständig fully ground shank gewährleistet präzise Zentrierung im Bohrfutter und reduziert Rundlauffehler. Bei der Arbeit empfiehlt sich Kühlschmierstoff für stationäre Anwendungen, um Wärme und Verschleiß zu minimieren. Da geschliffene Bohrer schärfere Kanten besitzen, sind sie relativ spröde; daher ist die Verwendung in stabiler Spanntechnik und bei moderaten Vorschubkräften zu bevorzugen. Nachschleifen ist möglich und erhält die Schneideigenschaften, wenn fachgerecht vorgegangen wird. Strong recommendation: Choose the MetavCUT short HSS-G Twist Drill for precision metalworking — Metav Werkzeuge provides expert advice and support via email info@metav-werkzeuge.com, phone +49 2822 7131930 and WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 45071-FDA Diameter: 7.1 mm Total length: 109 mm Spiral length: 69 mm Tip angle: 135° Type: Type N Execution: short Shank finish: fully ground Material: HSS-G Surface: bright finished Colour: bright finished Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Standard: DIN 338 Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The Twist Drill Type N from MetavCUT is designed for metalworking and is suitable for alloyed and unalloyed steels, cast steel, cast iron, sintered iron, malleable iron, non-ferrous metals and hard plastics, offering reliable performance in those materials. How does the short design of the MetavCUT Twist Drill Type N help in practice? A short Twist Drill by MetavCUT reduces overhang and vibration, which increases stability and improves bore accuracy; this makes it particularly effective for precise drilling tasks and for use in machines where minimal deflection is critical. What is a Twist Drill used for? A Twist Drill is mainly applied in the machining of high-strength materials and large bore diameters. Its shape allows for straightforward regrinding and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? There are three primary drill types: Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills pointed (ausgespitzt)? Pointing reduces the chisel edge at the tip, which significantly lowers friction forces and therefore reduces required feed force; additionally the pointed tip centres the drill more effectively in the workpiece. Can a metal drill be used to drill wood? A metal drill such as the Twist Drill by MetavCUT can be used in wood, but guidance is poorer and surface finish may be less clean; however these drills are easier to resharpen and show reduced self-feeding tendency. For what drilling depths is the Twist Drill most commonly used? A solid bore is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The general belief that HSSE steels are always superior to standard HSS is incorrect; the choice should be based on working conditions and whether the performance justifies a higher purchase price.
7.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kurzfazit: Der kurze Spiralbohrer aus HSS-G verbindet erhöhte Stabilität durch reduzierte Auskraglänge mit schnellerem Vorschub dank geschliffener Geometrie und eignet sich besonders für präzises Bohren in Stahl. Bestellen Sie das passende Werkzeug direkt über Metav Werkzeuge oder nutzen Sie unsere Beratung bei technischen Fragen. Spiralbohrer von MetavCUT — kurze HSS-G Ausführung für Metall Der Spiralbohrer ist eine kurze, geschliffene HSS-G Ausführung nach DIN 338 und wurde für präzise Metallbearbeitung an Handbohrmaschine und stationären Maschinen entwickelt. MetavCUT »450725-FDA« Spiralbohrer, HSS-G Kurze Ausführung für hohe Stabilität Spitzenwinkel 135° für harte Werkstoffe Spirallänge 69 mm, Gesamtlänge 109 mm Zylinderschaft nach DIN 338 Mehr Stabilität für präzise Bohrungen Die kurze Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren. Für Anwender bedeutet das weniger Vibration, bessere Rundlaufgenauigkeit und geringere Bruchgefahr im Vergleich zu langen Bohrern. Besonders bei der Bearbeitung von Stahl und anderen harten Werkstoffen sorgt die kompakte Bauform für kontrolliertere Zustellung und saubere Bohrbilder. Die geschliffene Geometrie unterstützt ein gleichmäßiges Spanflussverhalten und erleichtert das Zentrieren auf der Oberfläche. Effizienz durch geschliffene HSS-G Geometrie Der geschliffene HSS-G Werkstoff bietet scharfe Schneidkanten und hohe Schnittstabilität. Daraus resultiert ein schnelleres Eindringen in das Werkstück und eine geringere erforderliche Anpresskraft bei vergleichbarer Standzeit. Der Spitzenwinkel 135° wurde gewählt, um die Anbohrcharakteristik bei gehärteten Werkstoffen zu verbessern; dadurch verkürzt sich die Anbohrphase und das Werkzeug bleibt länger präzise. Anwender profitieren von effizienter Zerspanung ohne unnötigen Kraftaufwand. Geeignete Einsatzfelder und Zielgruppe Dieses Werkzeug richtet sich an Werkstätten, Instandhaltungsteams und handwerkliche Betriebe, die häufig in Metall, Guss oder Hartkunststoff bohren. Die kurze Ausführung macht den Bohrer zur idealen Wahl für präzise Durchgangs- und Sacklochbohrungen unter kontrollierten Bedingungen. Auch für die Nutzung in Handbohrmaschine ist der Bohrer geeignet, sofern auf korrekten Rundlauf und Kühlung bei stationären Einsätzen geachtet wird. Verarbeitung, Normen und Materialeigenschaften Die Fertigung nach DIN 338 legt die Abmessungen und Ausführungen kurzer Spiralbohrer fest; die geschliffene Produktion (HSS-G) gewährleistet hohe Rundlaufgenauigkeit und scharfe Kanten. Die Kombination aus Zylinderschaft, geschliffener Spirale und ausgewähltem Spitzenwinkel liefert wiederholbare Bohrresultate und erleichtert das Nachschärfen bei Bedarf. Für Anwender ohne tiefes Fachwissen: Geschliffen heißt, die Geometrie wurde per Schleifprozess gefertigt, was besonders saubere Bohrungen ermöglicht, aber stationäre Kühlung und sorgfältige Handhabung empfiehlt. Empfehlung: Für präzise Metallbohrungen die geschliffene HSS-G Ausführung von MetavCUT wählen und bei Bedarf technische Details direkt über Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 klären. Produktmerkmale Artikelnummer: 450725-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Material: HSS-G Norm: DIN 338 Typ: Typ N Fakten Durchmesser: 7,25 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Ausführung: kurz Schaft Ausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Zylinderschaft HSS-G: geschliffen, hohe Präzision FAQ Für welche Werkstoffe ist der Bohrer geeignet? Der MetavCUT Spiralbohrer (Typ N, HSS-G, SKU 450725-FDA) eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Ist dieser Bohrer für Handbohrmaschine oder stationäre Maschine gedacht? Die kurze Ausführung ist für beides verwendbar; der Spiralbohrer ist speziell für Handbohrmaschine und stationäre Maschinen geeignet, wobei bei stationärem Einsatz auf Rundlauf und Kühlung geachtet werden sollte. Wie beeinflusst der Spitzenwinkel 135° die Bohrung? Ein Spitzenwinkel von 135° reduziert das Einstechverhalten bei harten Werkstoffen und verbessert die Abstützung der Schneidkante, was beim MetavCUT Spiralbohrer zu saubereren Bohrbildern führt. Kann der geschliffene HSS-G Bohrer nachgeschärft werden? Ja, der geschliffene HSS-G Bohrer kann nachgeschärft werden; wegen der feinen Geometrie empfiehlt sich Nachschärfen unter kontrollierten Bedingungen oder durch Fachbetrieb. Welche Vorteile bietet die DIN 338 Ausführung? Die DIN 338 Klassifikation gewährleistet standardisierte Dimensionen und Ausführungen; beim MetavCUT Spiralbohrer bedeutet das verlässliche Austauschbarkeit und definierte Passgenauigkeit für gängige Spannfutter.
7.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombinieren Sie hohe Stabilität und effiziente Schnittleistung: Der kurze Spiralbohrer aus HSS-G liefert präzise Bohrlöcher in Stahl bei reduziertem Verbiegerisiko. Nutzen Sie die robuste Bauform und die Normkonformität für zuverlässige Ergebnisse oder fragen Sie unsere Beratung in Emmerich bei Bedarf an. Spiralbohrer kurz HSS-G Typ N von MetavCUT Der Spiralbohrer kurz HSS-G ist für präzise Metallbohrungen an stationären und handgeführten Maschinen konzipiert und bietet mehr Steifigkeit sowie geringere Verformung beim Eindringen in harte Werkstoffe. Kurze Ausführung für bessere Stabilität HSS-G geschliffen für präzise Schnittkante 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und Stationär DIN 338 konforme Bauform mit Zylinderschaft Hohe Präzision durch kurze Auskraglänge und geschliffene Geometrie Dank der kurzen Ausführung reduziert sich die Hebelwirkung deutlich, wodurch die Stabilität steigt und Verbiegen minimiert wird. Die geschliffene HSS-G-Geometrie sorgt für eine scharfe Schneide und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Stahl und Guss ermöglicht. Durch die Kombination aus kurzer Bauform und präzisem Schliff eignet sich dieses Bohrwerkzeug besonders für anspruchsvolle Werkstücke, bei denen Maßhaltigkeit und Oberflächenqualität zählen. Effizienzsteigerung bei reduziertem Kraftaufwand Die Herstellung und Geometrie des Bohrers ermöglichen ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS-Ausführungen. Für Anwender heißt das: kürzere Durchlaufzeiten und weniger Ermüdung bei Handmaschinen, ohne Einbußen bei der Bohrqualität. Die Normkonforme Ausführung nach DIN 338 sorgt zusätzlich für planbare Prozesse in der Fertigung. Materialwahl und Fertigungsverfahren mit Vor- und Nachteilen Der Einsatz von HSS-G (Schnellarbeitsstahl, geschliffen) steht für hohe Wärmefestigkeit und scharfe Kanten, die besonders bei legierten Stählen und Gusseisen Vorteile bringen. Geschliffene Bohrer bieten exzellente Schnittfreudigkeit und Genauigkeit; sie sind jedoch sensibler gegenüber Stoßbelastung und sollten vorzugsweise mit Kühlung und in stationären Setups eingesetzt werden, wenn hohe Zähigkeit des Werkstoffs vorliegt. Praktische Einsatzgebiete und Zielgruppe Mit einem Durchmesser von 7,2 mm ordnet sich dieses Bohrwerkzeug in den Standard-Bereich ein und deckt typische Werkstatt- und Montageaufgaben ab. Es eignet sich für Handwerker, Instandhalter und die Serienfertigung in mittleren Losgrößen, insbesondere für dünne bis mittlere Bleche, Profile und Flachstahl. Zur Erreichung höchster Präzision empfiehlt sich vor Zentrierbohren und beim Bohren in harten Werkstoffen der Einsatz geeigneter Kühlschmierstoffe. Empfehlung: Für präzise Stahlbohrungen das MetavCUT Bohrwerkzeug in kurzer Ausführung wählen und bei technischen Fragen den Vertrieb in Emmerich per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 45072-FDA Bezeichnung: Spiralbohrer Hersteller: MetavCUT Serie: Standard Line Typ: Typ N Norm: DIN 338 Material: HSS-G Farbe: blank Ausführung: kurz Schaftausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Fakten Durchmesser: 7,2 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten HSS-G: Schnellarbeitsstahl, geschliffen DIN 338: kurze Spiralbohrer mit Zylinderschaft Typ N: Normalspirale für Metall geschliffen: CNC-Schliff für hohe Rundlaufgenauigkeit blank: helle Oberfläche, bright finished Anwendung: Bohrer für Metall FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer kurz HSS-G Typ N (SKU 45072-FDA) eignet sich für härtere Werkstoffe; bei rostfreien Stählen ist der 135° Spitzenwinkel vorteilhaft. Empfehlenswert sind langsame Schnittgeschwindigkeiten und ausreichende Kühlung, um Überhitzung zu vermeiden. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung wurde speziell für den Einsatz an Handbohrmaschinen und stationären Maschinen konzipiert und bietet mehr Steifigkeit, die Verformung und Wandern reduziert. Der MetavCUT Spiralbohrer erlaubt so sichere Handhabung auch bei mittleren Bohrdurchmessern. Welche Vorteile bietet die geschliffene Schaftausführung? Die geschliffene Schaftausführung sorgt für hohe Rundlaufgenauigkeit und präzisere Bohrbilder, was besonders bei wiederholten Serienbohrungen und bei Verwendung in Spannmitteln von Vorteil ist. Beim MetavCUT Bohrer führt der CNC-Schliff zu saubereren Anschnitten und besserer Maßtreue. Wie sollte man vorgehen, wenn höchste Bohrgenauigkeit gefordert ist? Für maximale Maßhaltigkeit empfiehlt es sich, vorzuzeigen oder anzupunkten, die Bohrstelle zu zentrieren und gegebenenfalls mit Kühlschmierstoff zu arbeiten. Der MetavCUT Spiralbohrer bietet die nötige Geometrie; zusätzlich verbessern ein stabiler Spannkopf und geringe Vorschubabweichungen das Ergebnis. Für welche Anwendungen ist dieser Bohrer besonders geeignet? Der kurze HSS-G Bohrer eignet sich besonders für das Bohren in legierten und unlegierten Stählen, Gussstahl, Gusseisen sowie Hartkunststoff und Nichteisenmetalle. Anwender in Werkstatt, Montage und Instandhaltung profitieren von seiner Robustheit und Präzision.
7.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — short Type N, 7.3 mm, 135°, HSS‑G, DIN 338, bright finished The Twist Drill is a short Type N metalworking drill designed for precision work in hard materials, with a 7.3 mm Diameter and a 135° Point Angle suitable for Drilling Machines. Short Design for High Stability and Precision HSS-G Material for Clean, Accurate Holes 135° Point Angle for Hard Materials Fully Ground Shank for High Runout Accuracy DIN 338 Standard for Short Twist Drills Precision and Stability for demanding metalwork The short geometry with a 69 mm Spiral Length and 109 mm Overall Length reduces overhang and vibration, resulting in significantly improved stability and straighter holes. The reduced projection from the chuck lowers the tendency to bend under load, which is particularly advantageous when machining tough alloys or performing series production where repeatable results matter. The compact form factor aids guided drilling in jigs and setups requiring minimal runout. Faster cutting and lower feed force through HSS‑G grind Manufactured from HSS‑G, the cutting Edges are produced by CNC grinding, delivering very sharp lips and excellent concentricity. This fully ground design enables up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS drills, improving cycle times and reducing operator fatigue. Note: ground HSS can be more brittle than rolled types, so cooling and correct clamping are recommended to avoid breakage. Optimised for metal — material range and machine use Designed as a Type N (normal spiral), this short Twist Drill is targeted at metalworking: alloyed and unalloyed steels, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast Components, Non‑Ferrous Metals and hard Plastics. Conforming to DIN 338 for short twist drills with cylindrical shank, it is suitable for use on rotating stationary or mobile machine tools and for application in drilling machines where precision and durability are required. Handling tips for reliable, long service life A fully ground shank ensures low runout and precise clamping; however, to maximise lifetime and hole quality, apply appropriate cutting fluid when machining hard steels and reduce feed if chatter occurs. The 135° Point Angle shortens initial penetration time in harder materials but benefits from steady spindle speed and proper coolant. For best results, use correct chucking, avoid excessive overhang and inspect for wear frequently. Strongly recommend the MetavCUT short Twist Drill Type N for precision metal drilling — for technical questions or tailored advice METAV Werkzeuge offers comprehensive support via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) Designation: Twist Drill Brand: MetavCUT SKU: 45073-FDA Diameter: 7.3 mm Spiral Length: 69 mm Overall Length: 109 mm Point Angle: 135° Type: Type N Execution: short Colour: bright finished Shank Execution: fully ground Material: HSS-G Norm: DIN 338 Application: Drills for metal For Drilling Machine: Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger diameters in metalworking; its short design and robust geometry make it especially suitable for precise drilling in hard steels and similar workpieces. Which three drill types exist? Typical distinctions are: Metal drills (for steel and alloys), Wood drills (for timber and wood composites), and Stone/Concrete drills (for masonry and concrete). Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip, lowering friction and therefore the required feed forces; a sharpened tip also improves centring in the workpiece and leads to cleaner, more accurate holes. Can a metal Twist Drill be used in wood? A metal Twist Drill can be used in wood but will typically provide less guidance and a rougher finish than a dedicated Wood drill; however, metal drills are easier to regrind and exhibit lower self‑feed tendencies. For which drilling depths is the Twist Drill most used? A solid hole is commonly produced with a Twist Drill; for diameters up to around 20 mm and drilling depths up to about 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general belief that HSSE is categorically superior to HSS is not always correct; choose based on actual working conditions and whether the performance advantages justify the higher cost.
7.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Hohe Stabilität durch kurze Ausführung, schnelle Schnittfortschritte dank geschliffener HSS‑G Geometrie und der 135° Spitzenwinkel machen diese Lösung besonders wirtschaftlich für anspruchsvolle Metallbohrungen. Bestellen Sie den Spiralbohrer direkt über Metav und kontaktieren Sie unsere Beratung bei technischen Fragen. Spiralbohrer kurz HSS‑G 7,4 mm »Standard Line« von MetavCUT Der Spiralbohrer ist ein kurz ausgeführter, geschliffener HSS‑G Bohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen HSS‑G geschliffener Spiralbohrer für Metall Kurze Ausführung für höhere Stabilität Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen DIN 338 Norm, Zylinderschaft, SKU 45074‑FDA Stabilität und Effizienz bei der Metallbearbeitung Die kurze Ausführung reduziert das Auskragen aus dem Bohrfutter und erhöht so die Stabilität während des Bohrens. Durch die geschliffene HSS‑G Geometrie werden scharfe Schneiden und eine hohe Rundlaufgenauigkeit erzielt, was zu saubereren Bohrlöchern führt und das Nacharbeiten minimiert. Das Resultat ist ein spürbarer Produktivitätsgewinn: bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber konventionellen HSS‑Ausführungen. Material und Fertigungsqualität für saubere Bohrlöcher Gefertigt aus HSS‑G (Schnellarbeitsstahl, geschliffen) bietet der Werkstoff die Zähigkeit und Schneidhaltigkeit, die für legierte und unlegierte Stähle, Gusswerkstoffe und Nichteisenmetalle erforderlich ist. Der CNC‑Schliff sorgt für exakte Spanräume und scharfe Kanten, die den Spanabtransport verbessern und die Lochqualität erhöhen. Beachten Sie, dass geschliffene Bohrer empfindlicher gegenüber seitlichen Kräften sind; deshalb ist der Einsatz an stabiler Aufnahme und mit geeigneter Kühlung empfohlen. Empfohlenes Einsatzfeld und Maschinenvoraussetzungen Mit einem Durchmesser von 7,4 mm ordnet sich der Bohrer in den Standard‑Bereich ein und eignet sich für Werkstatt, Montage und viele DIY‑Anwendungen. Direktes Bohren ist möglich; für höchste Präzision empfiehlt sich das Anpunkten mit einem Zentrierbohrer. Der Bohrer passt sowohl in Handbohrmaschine als auch in stationäre Säulenbohrmaschinen, liefert aber die besten Ergebnisse bei stabiler Spannmittelaufnahme und moderater Drehzahl, ergänzt durch Kühlschmierstoff bei gehärteten Werkstoffen. Zielgruppe und Vorteile für Werkstatt und Produktion Konzipiert für Werkstätten, Instandhaltung und Fertigung, bietet diese Ausführung eine robustere Handhabung bei gleichzeitig hoher Bohrqualität. Die Kombination aus kurzer Ausführung, geschliffenem HSS‑G und 135° Spitzenwinkel reduziert Ausschuss und erhöht Durchsatz bei Serienarbeiten. Die Verpackungseinheit mit mehreren Stück eignet sich zur Bevorratung in Werkstatt und Montage, so dass Maschinenstillstand minimiert wird. Für präzise Metallbohrungen empfehlen wir den HSS‑G Kurzbohrer von MetavCUT als wirtschaftliche Wahl; bestellen Sie über Metav und lassen Sie sich bei Bedarf technisch beraten unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 45074-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Fakten Durchmesser: 7,4 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (Schnellarbeitsstahl) Schaftausführung: geschliffen Ausführung: kurz Norm: DIN 338 Typ: Typ N Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich dieser Bohrer am besten? Der Spiralbohrer von MetavCUT (SKU 45074‑FDA) eignet sich besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der HSS‑G Kurzbohrer ist für die Nutzung an Handbohrmaschine geeignet, liefert aber die besten Resultate bei stabiler Aufnahme und moderater Drehzahl. Was bedeutet HSS‑G geschliffen und welche Vor‑ und Nachteile hat das? HSS‑G steht für geschliffenen Schnellarbeitsstahl; der Schliff sorgt für scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher ermöglicht. Nachteilig ist eine erhöhte Empfindlichkeit gegenüber seitlichen Kräften, daher empfiehlt sich Kühlung und eine stabile Spannmittelaufnahme. Warum ist ein Spitzenwinkel von 135° vorteilhaft? Ein Spitzenwinkel von 135° reduziert die Anbohrdauer und eignet sich besonders für harte Werkstoffe wie Edelstahl und gehärtete Stähle, da er die Schneidenbelastung verteilt und den Vorschub erleichtert. Wie verlängert man die Lebensdauer des Bohrers? Durch richtige Drehzahlwahl, Einsatz von Kühlschmierstoff bei gehärteten Werkstoffen, ggf. Anpunkten mit Zentrierbohrer und die Vermeidung seitlicher Belastungen kann die Lebensdauer des Spiralbohrers von MetavCUT deutlich erhöht werden.
7.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — short Type N HSS‑G drill, 7.5 mm, 135°, bright finished, DIN 338, MetavCUT The Twist Drill is a short Type N HSS‑G drill designed for precise metal drilling in workshop and industrial applications, offering enhanced stability and a 135° point angle for hard materials. Short design for increased stability and precision High‑quality HSS‑G material for durable cutting 135° point for improved entry in hard metals Fully ground shank for precise concentricity Short design for stable, precise metal drilling A shorter overall length reduces overhang and significantly increases stability during drilling, which directly improves hole accuracy. The short execution means less vibration and a lower risk of bending when used in hand or machine drilling setups. This characteristic is particularly advantageous when working with hard or alloyed steels, where deflection would otherwise compromise the hole quality. High‑performance material and geometry for tougher tasks Made from HSS‑G, the geometry of the flute and the CNC grinding process produce very sharp cutting edges and consistent geometry for clean, round holes. The 135° point angle reduces the tendency to wander when starting a hole and shortens the initial penetration time in harder materials. For users with limited metallurgical knowledge: the larger point angle flattens the tip and distributes cutting forces, which helps when drilling stainless steel and other difficult alloys. Where this drill delivers the best results Engineered as a Type N normal‑spiral twist drill, this tool excels at drilling metals such as alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. The bright finished surface improves chip evacuation in many workshop applications. Workshops and metalworking professionals benefit from the combination of short length and fully ground shank for repeatable concentricity in production and maintenance tasks. Practical use and care for longer service life Correct use with appropriate coolant and moderate feed rates extends life and reduces breakage risk, since ground HSS drills, while sharp, can be more brittle than rolled variants. A fully ground shank ensures secure clamping and minimal runout; users should verify chuck grip and use steady feed. Periodic resharpening restores cutting geometry; the ground flutes make controlled resharpening possible on a bench grinder or by service providers. For robust and precise metalworking rely on MetavCUT’s short Twist Drill — METAV Werkzeuge provides expert advice and personalised support via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45075-FDA Diameter: 7.5 mm Point angle: 135° Type: Type N Execution: short Colour: bright finished Material: HSS‑G Shank execution: fully ground Spiral length: 69 mm Overall length: 109 mm Application: Drills for metal Standard: DIN 338 Suitable for: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The Twist Drill by MetavCUT (Type N) is optimised for drilling metals including alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics; its geometry and HSS‑G material favour performance on harder workpieces. How should the MetavCUT Twist Drill be used to avoid breakage? For the Twist Drill from MetavCUT, use steady feed, appropriate coolant and a secure chuck grip; since the drill is fully ground, it offers precision but benefits from controlled cutting conditions and occasional resharpening to maintain edge geometry. For what is a Twist Drill used? It is used primarily for machining high‑strength materials and large drill diameters; the form is easy to resharpen and withstands higher loads. Which three drill types exist? There are Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills point‑sharpened? Point‑sharpening reduces the cross‑cut at the tip, lowering friction and required feed forces while improving centring of the drill tip in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood but usually provides poorer guidance and less clean holes; however, such drills are easier to resharpen and have less self‑feeding tendency. At which drilling depths is the twist drill most commonly used? A through‑hole in solid material is often executed with a twist drill; for diameters up to 20 mm and drilling depths up to 100 mm, the twist drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE is universally superior to HSS is not always correct; choose according to actual working conditions to determine whether the higher cost of HSSE is justified.
7.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Nutzen Sie die Kombination aus kurzer Ausführung für höhere Stabilität, geschliffenem HSS‑G und dem 135° Spitzenwinkel für präzise Metallbohrungen; bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer »MetavCUT Standard Line« 7,6 mm Der Spiralbohrer kurze Ausführung aus HSS‑G, geschliffen und DIN 338-konform, für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. Spiralbohrer MetavCUT »Standard Line« Kurze Ausführung für höhere Stabilität Geschliffen HSS-G für scharfe Kanten Spitzenwinkel 135°: Für harte Werkstoffe Zylinderschaft nach DIN 338, SKU 45076-FDA Höhere Stabilität und schnellere Vorschübe durch kurze Ausführung Die kurze Ausführung reduziert die Auskraglänge und verbessert somit die Stabilität beim Bohren, was Vibrationen und Abweichungen minimiert. Der geschliffene HSS‑G-Schliff sorgt für sehr scharfe Schneidkanten, saubere Bohrlöcher und eine hohe Rundlaufgenauigkeit. Herstellerangaben zufolge ist ein geschliffener HSS‑Bohrer bis zu 40 % schneller und benötigt 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS‑Ausführungen, wodurch Arbeitszyklen effizienter gestaltet werden können. Geeignetes Einsatzfeld und Materialkompatibilität für verlässliche Ergebnisse Dieser Spiralbohrer ist primär für Metall ausgelegt und eignet sich besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie harte Kunststoffe. Der 135° Spitzenwinkel reduziert das Wandern beim Anbohren in harten Werkstoffen und verbessert das Eindringverhalten. Für präzise Ergebnisse empfiehlt sich vor dem Bohren ein Anpunkten, um die Bohrstelle zu zentrieren und ein sauberes Startloch zu gewährleisten. Für welche Anwender die Ausführung entwickelt wurde Die Ausführung richtet sich an Werkstätten, Montagebetriebe und ambitionierte Heimwerker, die Wert auf präzise, reproduzierbare Bohrungen legen. Durch die Kombination aus Zylinderschaft nach DIN 338 und der robusten Konstruktion ist der Bohrer sowohl für Handgeführte Bohrmaschinen als auch für stationäre Maschinen geeignet. Die Standard‑Dimensionen und die einfache Handhabung machen dieses Werkzeug zur Alltagslösung in der Metallbearbeitung. Wartungshinweise und empfohlene Arbeitsweisen für lange Standzeiten Geschliffene Bohrer bringen sehr feine Schneiden, sind aber empfindlicher gegen Seitenbelastung; daher ist eine schonende Handhabung wichtig. Kühlung mit Schneidöl verlängert die Standzeit deutlich und reduziert thermische Belastungen beim Bohren in zähen Werkstoffen. Bei größeren Durchmessern oder tiefen Löchern empfiehlt sich ein abgestuftes Aufbohren und regelmäßiges Spanfreimachen, um Verstopfungen in der Spirale zu vermeiden. MetavCUT empfiehlt diesen Spiralbohrer der Standard Line für anspruchsvolle Metallbearbeitung – bei technischen Rückfragen steht Metav persönlich zur Verfügung: info@metav-werkzeuge.com | +49 2822 7131930 Produktmerkmale Artikelnummer: 45076-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Ausführung: kurz Norm: DIN 338 Fakten Durchmesser: 7,6 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen; hohe Schärfe) Schaftausführung: geschliffen (vollständig geschliffen) Typ: Typ N (Normalspirale für Metall) Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Ist der Spiralbohrer MetavCUT Standard Line für Edelstahl geeignet? Der Spiralbohrer MetavCUT Standard Line (HSS‑G, SKU 45076-FDA) mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe wie Edelstahl, wobei langsame Schnittgeschwindigkeiten und Kühlung empfohlen werden. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT ist für den Einsatz an Handbohrmaschine und stationären Maschinen ausgelegt; bei Handbetrieb auf eine sichere Spannaufnahme und moderaten Anpressdruck achten. Wie unterscheidet sich die geschliffene Ausführung vom rollgewalzten Bohrer? Geschliffen (HSS‑G) bedeutet CNC‑Schliff der Geometrie für schärfere Kanten und bessere Rundlaufgenauigkeit; der Spiralbohrer MetavCUT Standard Line liefert dadurch präzisere Bohrbilder, ist jedoch empfindlicher gegen seitliche Belastung. Welche Vorsichtsmaßnahmen verlängern die Lebensdauer des Bohrers? Für den Spiralbohrer MetavCUT Standard Line empfiehlt sich Kühlung mit Schneidöl, Anpunkten vor dem Bohren und regelmäßiges Spanmanagement, um Überhitzung und Bruch zu vermeiden. Für welche Anwendungen ist der 7,6 mm Durchmesser besonders geeignet? Der 7,6 mm Spiralbohrer der MetavCUT Standard Line eignet sich für allgemeine Werkstattarbeiten, Montageaufgaben und präzise Metallbohrungen in mittelstarken Blechen und Bauteilen.
7.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — short HSS-G Type N, 7.75 mm, 135°, bright finished The Twist Drill short Type N from MetavCUT is designed for precise metal drilling on Drilling Machines, offering a short overall length and a 135° point angle for demanding, hard materials. Short design for greater stability 7.75 mm Diameter for precise holes HSS-G ground geometry for clean metal drilling 135° Point angle for hard materials Precision and stability thanks to the short design A short construction reduces the free length outside the chuck, resulting in noticeably higher Stability and less deflection during machining. This makes the short Twist Drill particularly suited for precision work in steel and other hard materials, where a rigid tool setup produces cleaner holes and more consistent diameters. The DIN 338 classification guarantees that the geometry and dimensions meet recognised standards for short cylindrical-shank drills, so users can rely on repeatable results when machining alloys, cast materials or sintered iron. Ground geometry for sharper cutting and dimensional accuracy The designation HSS-G indicates a ground flute geometry produced by CNC grinding rather than rolling. This manufacturing method yields very sharp cutting edges and excellent Roundness of the hole, which benefits finishing operations and reduces the need for rework. While ground drills often show higher brittleness than rolled types, correct use with cutting fluid and machine support minimises the risk of breakage and extends tool life. For operators, the result is faster penetration and cleaner hole walls in materials such as alloyed and unalloyed steel. Target users and typical applications Metalworkers, toolshops and industrial maintenance teams will appreciate that this short Type N Twist Drill was developed for conventional and CNC Drilling Machines to machine metals reliably. The tool is intended for holes in Metal, including cast and tempered materials, and is less suitable for soft, fibrous materials where specialised point geometries perform better. MetavCUT focuses this product at professionals seeking a robust, repeatable drilling solution for workshops and production environments. Handling tips: angle, feed and cooling for best results A 135° point angle improves centring and reduces the initial bite when penetrating hard surfaces such as stainless steel, shortening the dwell time at drill start. Operators should use moderate spindle speeds and sufficient cutting fluid for cooling and chip evacuation, especially at larger diameters. The Fully Ground shank ensures good concentricity in the chuck, while proper clamping and minimal overhang will further reduce runout and deliver precise, burr-reduced holes. Strong recommendation: Choose the MetavCUT Twist Drill short Type N for demanding metalworking tasks — for personalised technical advice or to confirm suitability for your application, contact METAV Werkzeuge; Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical information Twist Drill Brand: MetavCUT SKU: 450775-FDA Diameter: 7.75 mm Spiral length: 75 mm Overall length: 117 mm Point angle: 135° Type: Type N Material: HSS-G Shank finish: Fully ground Execution: short Colour / Finish: bright finished For Drilling Machine Application: Drills for metal Model series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ How well does the MetavCUT Twist Drill Type N perform in stainless steel? The MetavCUT Twist Drill short Type N is designed for hard materials; its 135° point angle and HSS-G ground geometry improve centring and cut quality in stainless steel when used with adequate cutting fluid and correct speeds. Can the MetavCUT Twist Drill be resharpened and reused? The HSS-G ground Twist Drill from MetavCUT can be resharpened on appropriate grinding equipment; careful resharpening preserves geometry, but frequent restoration may reduce core strength, so professional resharpening is recommended. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters; its shape is relatively easy to grind and can withstand higher loads, making it suitable for demanding metalworking tasks. Which 3 drill types are there? There are three common drill categories: Metal drill, Wood drill, and Stone / Concrete drill.
Precisely centred starts and low feed force for demanding metalwork
The HSS‑G twist drill DIN 338 type N, short, ground, bright, with 135° split point cross grind is a precision tool for professional metalworking. This short DIN 338 twist drill, also offered as a precision HSS type N drill, combines a ground profile from high‑performance high‑speed steel with a polished, uncoated surface and a 135° split point for reliable centring.
Designed for universal use on normal cutting materials, the geometry of the type N core provides low feed force and strong centring behaviour. The polished bright surface reduces friction and prevents chip build‑up on soft, lubricious materials such as aluminium and plastics, while the cross‑grind at the tip (split point) minimises wandering during the initial drill entry.
Technical data at a glance
- material: high‑speed steel (HSS‑G)
- standard: DIN 338 (short)
- type: type N core geometry
- surface: bright / uncoated / ground and polished
- point: 135° split point with cross grind
- universal geometry for normal‑cutting materials
- optimised flute polish for smooth chip evacuation
- suited to hand‑held drills, bench and pillar drills
Advantages you can measure
- Reduced feed force thanks to the 135° split point, lowering operator effort and tool stress.
- Cleaner holes and longer tool life due to razor‑sharp ground cutting edges and precise run‑out accuracy.
- Lower risk of build‑up on the cutting edge when machining soft metals and polymers because of the bright, low‑friction surface.
- Reliable centring on flat or curved surfaces—preceding centre‑punching is often unnecessary.
- Smooth chip evacuation through highly polished flutes for uninterrupted production runs.
Why choose Metav as your precision partner Metav democratises precision by making high‑quality measuring and cutting tools accessible to every workshop. Based in Emmerich, Metav acts as a quality filter for the European market, combining decades of expertise with an inventory of over 250,000 products. More than 48,000 customers trust Metav for consistent supply and clear, dependable order processing—advantages that make Metav an efficient single‑source partner for machining consumables and tooling.
In short: the HSS‑G twist drill DIN 338 type N, short, ground, bright, with 135° split point cross grind is a robust allrounder for craft and serial production, offering precise centring, outstanding chip control and reduced machining effort.
FAQ
Which materials are suitable for this HSS‑G twist drill?
The HSS‑G twist drill with type N geometry is intended for normal‑cutting materials and performs particularly well on non‑ferrous metals (for example aluminium) and various plastics due to its bright, low‑adhesion surface.
Do I need to centre‑punch before drilling?
The 135° split point cross grind significantly improves self‑centring; for many flat or slightly curved surfaces a prior centre‑punch is not required, reducing setup time.
Is the drill coated?
This short DIN 338 twist drill is supplied bright and uncoated (polished), which reduces build‑up when machining lubricious materials.
Can I use this drill in hand‑held machines as well as pillar drills?
Yes. The DIN 338 short format is designed for use in hand‑held drills, bench and pillar drills, offering reliable run‑out accuracy across these machine types.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com