Precision short twist drills for exact, clean holes
The HSS-G short twist drill DIN 338 type N with a 135° split point and cross grind provides a versatile solution for metalworking, designed to deliver high concentricity and razor-sharp cutting edges for demanding production and workshop applications. Its ground, polished blank surface reduces friction and prevents built-up edge when machining soft, lubricious materials such as aluminium or plastics, while the flatter 135° point with cross grind improves self-centring and lowers feed force so that pre‑spotting is often unnecessary. This drill is ideal for handheld, bench and pillar drilling operations, combining excellent chip evacuation, consistent hole accuracy and robust performance.
9.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — short HSS‑G, 9.7 mm, 135° point, bright finished, DIN 338, fully ground shank — MetavCUT The Twist Drill (Type N) is a short HSS‑G drill designed for precise metal drilling on Drilling Machines and hand drills, combining a 135° point angle with a fully ground shank for stable, accurate holes. Short design for higher stability and precision HSS‑G construction for sharpness and durability 135° point for harder materials and improved centring Fully ground shank for excellent runout accuracy Suited to alloyed and unalloyed steel, cast and sintered materials Built for demanding metalwork with faster drilling and lower feed forces The Short Design of this Twist Drill follows DIN 338 and reduces overhang from the chuck, resulting in significantly improved Stability and reduced deflection during machining. Made from HSS‑G, the geometry is CNC‑ground to produce very sharp cutting edges; this leads to Faster Drilling (up to 40% quicker in many metals) and Less Feed Force (up to 50% reduction), which helps when working with tough or alloyed steels. These benefits translate directly into higher throughput and fewer re‑works in daily workshop use. Precision features that support clean holes and consistent centring A 135° Point provides a flatter cutting profile ideal for harder workpiece materials, while the Fully Ground Shank and refined flute geometry give excellent Precision and Runout Accuracy. With a 9.7 mm Diameter, a Spiral Length of 87 mm and an Overall Length of 133 mm, this short Twist Drill maintains rigidity without sacrificing effective drilling depth. These design choices make it especially suitable where hole quality and repeatability are essential. Optimised for metal: recommended applications and target users This Twist Drill is intended primarily as a Drill for Metal and performs well in alloyed and unalloyed Steel, Cast Steel, Gusseisen, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. Professional workshops, toolrooms and maintenance crews that require precise, repeatable holes in tougher materials will benefit most from the combination of Type N Normal spiral geometry and the HSS‑G (ground) manufacturing method. Handling advice to extend tool life and ensure reliable results To get optimal performance from the ground Twist Drill, use appropriate Cooling and moderate spindle speeds for the chosen material; ground HSS tends to be sharper but can be more brittle than rolled equivalents, so avoid heavy impact or excessive pecking cycles. For stationary machining and production runs, the Short Design offers superior stability; for portable drilling, ensure the chuck grip and pilot guidance are precise. Regular inspection and professional Regrinding will restore cutting edges, but regrind practices should respect the original 135° point geometry. We recommend the MetavCUT short Twist Drill for precision metal drilling — for tailored advice, further technical data or to check suitability for your application, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Detailed Technical Specifications for Workshop Use Designation: Twist Drill Brand: MetavCUT SKU: 45097-FDA Diameter: 9.7 mm Point Angle: 135° Type: Type N Execution: short Spiral Length: 87 mm Overall Length: 133 mm Material: HSS-G Shank: fully ground Colour: bright finished Standard: DIN 338 Application: Drills for metal For: Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ How does the MetavCUT Twist Drill differ from a rolled HSS drill? The MetavCUT Twist Drill in HSS‑G (ground) form is CNC ground to create very sharp cutting edges and high runout accuracy; this yields cleaner holes and faster penetration in many metals compared with rolled HSS drills, though ground drills can be more brittle and benefit from controlled cutting parameters. Is the MetavCUT Twist Drill suitable for stainless steel and other hard alloys? Yes, the MetavCUT Twist Drill with a 135° point and Type N spiral is designed to perform well in harder materials such as stainless and alloyed steels; the short design improves rigidity and helps maintain hole quality in demanding alloys. For what is a Twist Drill used? A Twist Drill is primarily applied to the machining of high‑strength materials and larger bore diameters; its ground form is easy to regrind and resists high loads, making it suitable for precise work in metals. Which three drill types exist? There are three main drill types: Metal Drills, Wood Drills and Stone/Concrete Drills. Why are twist drills sharpened (pointed)? Sharpening reduces the chisel edge at the tip, significantly lowering friction and thus the required feed force, while also improving the drill’s ability to centre in the workpiece. Can you use a Metal Drill in wood? A Metal Drill can be used in wood, but it usually offers poorer guidance and a less clean finish; however, such drills are easier to resharpen and have lower self‑feeding tendencies. For which drilling depths is the Twist Drill most commonly used? A solid‑material bore is commonly executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common belief that HSSE steels are universally superior to HSS is incorrect; evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for your specific application.
9.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus Kurzbauweise, geschliffener HSS‑G Geometrie und 135° Spitzenwinkel sorgt für präzise, stabile Bohrungen in harten Werkstoffen; bestellen Sie den MetavCUT Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 9,8 mm HSS‑G (Kurz) – MetavCUT Der Spiralbohrer 9,8 mm HSS‑G ist ein kurzer, geschliffener Metallbohrer für präzise Bohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen Kurzbauweise für hohe Stabilität bei Bohrungen HSS‑G geschliffen für scharfe Schneiden und saubere Bohrbilder 135° Spitzenwinkel optimiert für harte Werkstoffe DIN 338 Norm für kurze Spiralbohrer mit Zylinderschaft Stabilität und Präzision bei harten Werkstoffen Die reduzierte Auskraglänge macht sich in der Praxis sofort bemerkbar: Weniger Verbiegen und ein geringerer Rundlauf erhöhen die Präzision und reduzieren Ausschuss. Durch die kompakte Bauform lässt sich das Werkzeug sicher in Handbohrmaschine und stationären Maschinen führen, wodurch saubere Bohrlöcher in Stahl und Guss entstehen. Die kurze Spiralbohrer‑Ausführung minimiert Vibrationen und erhöht die Standzeit unter geeigneter Kühlung. Effizienz durch geschliffene HSS‑Geometrie Der geschliffene HSS‑Bohrer überzeugt durch sehr scharfe Schneiden und hohe Rundlaufgenauigkeit. In der Praxis führt das zu einem bis zu 40 % schnelleren Vorschub und etwa 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS‑Ausführungen, was Kraftaufwand und Bearbeitungszeit reduziert. Bei stationärer Nutzung und Kühlung lässt sich das Potenzial vollständig ausschöpfen; bei Handgebrauch ist auf sachte Führung zu achten, da geschliffene Bohrer spröder sein können. Einsatzspektrum und Anwendernutzen Dieser Kurzspiralbohrer wurde für Anwender in Werkstatt, Instandhaltung und Produktion entwickelt, die präzise Metallbohrungen erwarten. Geeignete Werkstoffe sind legierte und unlegierte Stähle, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und harte Kunststoffe. Für handgeführte Anwendungen bietet der Bohrer durch die kompakte Länge hohe Kontrolle; in Serienfertigung empfiehlt sich die Kombination mit Spannvorrichtungen und Kühlmittel für konstante Ergebnisse. Normen, Schaft und Anwendungshinweise Die Fertigung nach DIN 338 steht für kurze Spiralbohrer mit Zylinderschaft und definiert die maßgeblichen Geometrien. Die geschliffene Schaftausführung sorgt für präzisen Rundlauf; der 135° Spitzenwinkel erleichtert den Anbohrvorgang in harten Werkstoffen und reduziert Ausriss. Für den Durchmesserbereich bis 13 mm kann in vielen Fällen direkt gebohrt werden; bei sehr hoher Maßgenauigkeit empfiehlt sich ein Anpunkten mit einem Zentrierbohrer. Empfehlung: Für präzise Metallbohrungen die MetavCUT Kurzspirale HSS‑G Typ N wählen; technische Beratung oder Bestellwunsch gerne per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erfragen Produktmerkmale Artikelnummer: 45098-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 9,8 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS‑G (geschliffen) Schaftausführung: geschliffen Ausführung: kurz Norm: DIN 338 (kurze Spiralbohrer, Zylinderschaft) Typ: Typ N (Normalspirale) Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer 9,8 mm HSS‑G ist besonders geeignet für legierte und unlegierte Stähle, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und harte Kunststoffe; die Kombination aus geschliffener Geometrie und 135° Spitzenwinkel unterstützt das saubere Einbohren in harte Werkstoffe. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, die Kurzbauweise des Spiralbohrers macht ihn für Handbohrmaschine und stationäre Maschinen geeignet; bei handgeführten Anwendungen empfiehlt sich eine ruhige Führung und gegebenenfalls geringere Vorschubkräfte, um Bruchrisiken zu minimieren. Welche Vorteile bietet die geschliffene HSS‑Ausführung? Geschliffene HSS‑Bohrer (HSS‑G) haben sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was zu schnellerem Bohren und saubereren Bohrlöchern führt; beim MetavCUT Spiralbohrer zeigt sich das in deutlich reduziertem Kraftaufwand und verbesserten Schnittbedingungen. Ist Vorbohren nötig, und welche Vorgehensweise wird empfohlen? Bei einem Durchmesser von 9,8 mm kann in vielen Anwendungen direkt gebohrt werden; für besonders präzise Passungen empfiehlt sich zuvor ein Zentrierbohrer oder punktgenaues Anpunkten, um ein Wanderverhalten des Bohrers zu vermeiden.
9.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 9.9 mm, 135° tip, short, bright finished, HSS‑G, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS‑G drill for precision metal drilling, designed for use in hand and machine drilling applications. Short design for improved stability 135° tip for hard materials HSS‑G fully ground for precise holes Conforms to DIN 338 for metalworking Precision and performance for demanding metalwork Designed for accurate metal drilling, this HSS‑G short Twist Drill delivers consistently clean holes with high roundness. The fully ground geometry produces very sharp cutting edges and excellent runout characteristics, which reduces burr formation and improves hole quality. For users seeking reliable results in alloyed and unalloyed steels, the combination of Type N spiral and a 135° point angle supports controlled penetration and reduces lateral wandering during the initial drill entry. Short length for stability and faster operation Because the bit has a reduced protruding length, the short design significantly increases rigidity and lowers the tendency to bend under load. This leads to measurable workflow benefits: the grinded HSS geometry enables drilling up to 40% faster while requiring 50% less feed force compared with conventional HSS variants. Contractors and workshop technicians working on small setups or clamped workpieces profit from improved precision and less chatter when using a compact, robust drill of this design. Geometry and materials optimised for hard materials The 135° tip angle is chosen specifically to assist drilling into harder materials such as stainless steel and tempered components; a larger point angle shortens initial bite time while maintaining tool life. The designation DIN 338 classifies this short Twist Drill with a cylindrical shank and describes the ground manufacturing process; grinding (HSS‑G) creates sharp cutting lips but can make the tool more brittle, so coolant and steady machine setup are advisable to avoid premature breakage. Who benefits and practical usage advice This Twist Drill is targeted at professional users and advanced hobbyists needing reliable metal drilling — especially for precision work on lathe‑mounted or stationary drilling machines and well‑supported handheld drilling operations. The fully ground shank ensures good chucking accuracy; for best results, secure the workpiece, use appropriate cutting fluid and moderate feed, and avoid excessive overhang. MetavCUT’s short series is particularly suitable when stability and accuracy are priorities over reach. Strongly recommended: choose the MetavCUT short HSS‑G Twist Drill Type N for demanding metal applications — for personalised technical advice and ordering support contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45099-FDA Diameter: 9.9 mm Tip angle: 135° Type: Type N Execution: Short Colour: Bright finished Material: HSS‑G Shank finish: Fully ground Spiral length: 87 mm Overall length: 133 mm For drill machine: Drilling Machine (Hand drill) Model series: Standard Line Norm: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit them best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is especially effective on alloyed and unalloyed steels, cast materials and non‑ferrous metals. Its geometry and 135° point make it suitable for harder workpieces where accurate centring and reduced walking are required. Which three drill types are commonly distinguished? In general practice three main categories are identified: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for machining metallic materials. Can the MetavCUT Twist Drill be used in a handheld drill or only in machine tools? The short design of the MetavCUT Twist Drill Type N improves rigidity and makes it suitable for both well‑supported handheld drilling and stationary machine tools; however, optimum precision is achieved in clamped or machine setups with appropriate cooling. Why is the tip of a Twist Drill ground to a specific angle? The 135° tip on the MetavCUT Twist Drill reduces initial cutting forces and improves centring in hard materials; grinding the tip also reduces the cross‑cut width, lowering friction and the required feed, which helps achieve cleaner holes with less tool wear.
9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 9 mm, 135° tip, short, bright finished, HSS-G, DIN 338 (MetavCUT) A short, precision Twist Drill Type N designed for metalworking with a 9 mm diameter and a 135° point angle for stable, clean drilling in hard materials. Short design for higher stability HSS‑G ground for fast, precise drilling 135° point for hard materials like stainless steel Conforms to DIN 338 for short cylindrical drills Fully ground shank for excellent concentricity Durable HSS‑G construction for reliable metalworking The HSS‑G material offers a balance of hardness and edge retention that benefits demanding metalworking tasks. Built as a ground High Speed Steel tool, this short drill delivers sharp cutting edges and high runout accuracy, which reduces burr formation and improves hole quality. For users who prioritize precision, the ground geometry translates into cleaner bores and fewer reworks, while the bright finished surface aids chip evacuation during cutting. Short design increases stability and precision A reduced overall length and a shorter Spiral length improve stiffness during drilling, so less bending occurs under load. This compact geometry is particularly useful when machining legiertem und unlegiertem Stahl and other hard metals, where a rigid tool axis is essential. The shorter overhang results in increased feed stability, enabling higher feed rates in many setups without sacrificing hole accuracy. 135° tip and Type N spiral for hard materials The 135° point angle is tailored to cut into harder materials with reduced tendency to wander at entry, making it suitable for stainless steel and other tougher alloys. As a Type N (normal spiral) configuration, the tool is optimized for metal drilling rather than soft substrates. For less experienced users: a larger tip angle decreases the initial cutting aggressiveness and improves centering, which helps when starting holes in tough components. Precise shank and DIN 338 compliance for machine use With a fully ground shank, the drill provides excellent concentricity and grip in standard drill chucks and toolholders, reducing runout and wear. Conformance to DIN 338 ensures standardized dimensions and compatibility with common tool setup procedures in production and workshop environments. These characteristics make the tool well suited to both stationary machines and portable drilling machines used in metal fabrication. Who benefits and recommended applications Mechanical workshops, toolrooms and production engineers working with steels, cast materials and non‑ferrous metals will find the short Twist Drill especially advantageous for precision holemaking. Its properties support drilling in components where surface finish and positional accuracy matter. For simple explanations: HSS‑G denotes a ground High Speed Steel drill, Type N indicates the classic metal spiral, and the 135° tip suits harder substrates. Strong recommendation: For precision metal drilling choose the MetavCUT short Twist Drill Type N with HSS‑G ground geometry — METAV Werkzeuge offers expert advice and technical support if needed. If unsure whether this tool meets specific requirements or if additional technical data is required, please contact us — 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45090-FDA Diameter: 9 mm Point angle: 135° Type: Type N Execution: short Overall length: 125 mm Spiral length: 81 mm Shank execution: fully ground Material: HSS-G Finish: bright finished For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Norm: DIN 338 Colour: bright finished Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Type N drill? The Twist Drill by MetavCUT, Type N, is primarily used for drilling metal; it is ideal for legiertes und unlegiertes Stahl, Gussstahl, Gusseisen and non‑ferrous metals. The Type N spiral and HSS‑G ground geometry ensure reliable cutting in harder materials and give good hole quality in workshop and production settings. Which three drill types exist and where does the MetavCUT Twist Drill fit? Three common drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill is a metal drill (Type N) and is specifically engineered for use in metalworking rather than for wood or stone. Why is the tip of a Twist Drill sharpened and how does that help in practice? The tip sharpening reduces the cross‑cut edge at the drill point, lowering friction and required feed force. For the MetavCUT Twist Drill Type N this means easier entry, better centering and reduced heat generation, resulting in cleaner holes and longer tool life when combined with appropriate cooling. Can the MetavCUT Twist Drill be used for drilling wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but it will usually offer less guidance and a rougher finish than a dedicated wood drill. Metal drills are easier to resharpen and exhibit less self‑feeding, so they may require more careful positioning when used in timber.
Precisely centred starts and low feed force for demanding metalwork
The HSS‑G twist drill DIN 338 type N, short, ground, bright, with 135° split point cross grind is a precision tool for professional metalworking. This short DIN 338 twist drill, also offered as a precision HSS type N drill, combines a ground profile from high‑performance high‑speed steel with a polished, uncoated surface and a 135° split point for reliable centring.
Designed for universal use on normal cutting materials, the geometry of the type N core provides low feed force and strong centring behaviour. The polished bright surface reduces friction and prevents chip build‑up on soft, lubricious materials such as aluminium and plastics, while the cross‑grind at the tip (split point) minimises wandering during the initial drill entry.
Technical data at a glance
- material: high‑speed steel (HSS‑G)
- standard: DIN 338 (short)
- type: type N core geometry
- surface: bright / uncoated / ground and polished
- point: 135° split point with cross grind
- universal geometry for normal‑cutting materials
- optimised flute polish for smooth chip evacuation
- suited to hand‑held drills, bench and pillar drills
Advantages you can measure
- Reduced feed force thanks to the 135° split point, lowering operator effort and tool stress.
- Cleaner holes and longer tool life due to razor‑sharp ground cutting edges and precise run‑out accuracy.
- Lower risk of build‑up on the cutting edge when machining soft metals and polymers because of the bright, low‑friction surface.
- Reliable centring on flat or curved surfaces—preceding centre‑punching is often unnecessary.
- Smooth chip evacuation through highly polished flutes for uninterrupted production runs.
Why choose Metav as your precision partner Metav democratises precision by making high‑quality measuring and cutting tools accessible to every workshop. Based in Emmerich, Metav acts as a quality filter for the European market, combining decades of expertise with an inventory of over 250,000 products. More than 48,000 customers trust Metav for consistent supply and clear, dependable order processing—advantages that make Metav an efficient single‑source partner for machining consumables and tooling.
In short: the HSS‑G twist drill DIN 338 type N, short, ground, bright, with 135° split point cross grind is a robust allrounder for craft and serial production, offering precise centring, outstanding chip control and reduced machining effort.
FAQ
Which materials are suitable for this HSS‑G twist drill?
The HSS‑G twist drill with type N geometry is intended for normal‑cutting materials and performs particularly well on non‑ferrous metals (for example aluminium) and various plastics due to its bright, low‑adhesion surface.
Do I need to centre‑punch before drilling?
The 135° split point cross grind significantly improves self‑centring; for many flat or slightly curved surfaces a prior centre‑punch is not required, reducing setup time.
Is the drill coated?
This short DIN 338 twist drill is supplied bright and uncoated (polished), which reduces build‑up when machining lubricious materials.
Can I use this drill in hand‑held machines as well as pillar drills?
Yes. The DIN 338 short format is designed for use in hand‑held drills, bench and pillar drills, offering reliable run‑out accuracy across these machine types.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com