Vollbohrer für effizientes Tiefbohren in Massivwerkstoff
Vollbohrer ermöglichen das direkte Einbringen von Bohrungen in Massivwerkstoff und sparen durch den Einsatz auf Drehmaschinen und Bearbeitungszentren wertvolle Prozesszeit, indem sie große Materialvolumina in einem Arbeitsgang abtragen; dabei bietet die Variante mit Innenkühlung die notwendige Kühlmittelzufuhr, um hohe Reibungswärme abzuführen und Späne sicher aus dem Bohrloch zu spülen, während Ausführungen ohne Innenkühlung nur für sehr kurze Bohrtiefen und leicht zerspanbare Materialien geeignet sind; als Synonyme gelten Massivbohrer und Vollkernbohrer, die in der Zerspanung vor allem durch ihre Standzeit und Prozesssicherheit überzeugen.
39mm Solid Drill 117mm Cutting Length 32mm Shank, 214mm Overall Length - Teknik Makina
Take advantage of a balance between robust rigidity, replaceable-index insert economy and straightforward servicing for stable production drilling. With a 39 mm diameter and a 32 mm shank the tool minimises vibration while the use of SPMG 1104 inserts keeps tooling costs predictable — order directly via Metav Werkzeuge or consult the technical team for application advice. Indexable drill U839TM – 39 mm diameter, 32 mm shank (Teknik Makina) The Indexable drill U839TM is a heavy-duty indexable drilling solution for industrial machining where fast insert changes and consistent hole quality are required High rigidity: 39 mm operating diameter Secure clamping: 32 mm shank for stability Compatible with SPMG 1104 indexable inserts 117 mm effective cutting length, 214 mm overall Enhanced stability for consistent hole quality The tool’s 39 mm diameter combined with a sturdy 32 mm shank delivers improved axial and radial stiffness under cutting loads, which means fewer deviations in hole geometry and reduced rework. Built with a compact overall length of 214 mm, the design keeps overhang to a minimum while still offering reach for many production tasks. The moderate mass of 1.155 kg contributes to damping of chatter without adding unnecessary inertia, so machining routines run smoothly and spindle load is predictable — a clear efficiency gain for production-focused setups. Fast, cost-efficient insert handling Designed for use with SPMG 1104 indexable inserts and compatible with Taegutec and YG-1 insert systems, the drilling head allows rapid replacement of cutting edges. Indexable inserts separate the cutting grade from the tool body, enabling economical maintenance: worn inserts are swapped instead of replacing the whole cutter. This approach reduces tool downtime and simplifies inventory management for workshops that prefer standardised insert formats from recognised manufacturers. Reach and cutting length tuned for deeper bores An effective cutting length of 117 mm provides the necessary engagement for deeper hole operations without excessive tool extension. That cutting length, paired with the overall 214 mm length, gives a balance between accessibility and rigidity — fewer tool changes are required for medium-depth bores, which supports continuous production cycles. The combination of cutting reach and secure shank interface is intended to support repeatable bore depths and consistent surface finishes in serial operations. Ready for production supply and technical guidance Supplied by Teknik Makina and available via Metav Werkzeuge, the tool is positioned for quick dispatch to professional workshops and industrial users. The indexable design supports predictable servicing routines and lower unit costs over time, while compatibility with established insert manufacturers simplifies procurement. For buyers seeking robust, maintainable drilling solutions, this indexable cutter integrates well into structured tool sets and controlled production workflows. For tailored application advice or to secure supply from Metav Werkzeuge in Emmerich, contact our specialists for precise delivery options and compatibility checks — Metav Werkzeuge provides reliable stock and technical support for Teknik Makina tools. Technical details SKU: U839TM Manufacturer: Teknik Makina Data Diameter: 39 mm Overall length: 214 mm Cutting length: 117 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.155 kg Special features Indexable insert type: SPMG 1104 Compatible insert manufacturers: Taegutec, YG-1 Description note: Rapid dispatch; further tools available in catalogue FAQ Which insert type fits this indexable drill? The indexable drill U839TM is designed for SPMG 1104 inserts; inserts from Taegutec and YG-1 are suitable. What is the shank diameter and why does it matter? The tool has a 32 mm shank, providing a secure clamping interface that improves rigidity and reduces vibration during drilling. How deep can this tool drill effectively? The cutter offers an effective cutting length of 117 mm, which determines the practical maximum engagement for single-pass bore operations. Is the tool intended for production use? Yes — the combination of indexable inserts, a robust shank and balanced overall length makes it suitable for repeatable, production-oriented drilling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
39mm Solid Drill 156mm Cutting Length 58mm Shank Length, 253mm Overall Length - Teknik Makina
Take advantage of a rigid, indexable drilling solution that pairs diameter 39 mm stability with straightforward insert replacement for economical machining. The combination of robust shank support and compatibility with Korloy inserts ensures consistent hole quality and reduced tooling downtime. Order via Metav Werkzeuge or consult the technical team for application advice. Teknik Makina Vollbohrer – Indexable drill body, Ø 39 mm, Shank Ø 32 mm The Teknik Makina Vollbohrer is a high‑rigidity drill body designed for industrial metalworking applications where repeatable hole quality and quick insert turnover are required Indexable drill body design Diameter 39 mm for robust holes Shank Ø 32 mm, 58 mm engagement Compatible with Korloy WCM-06T3 inserts Steady performance for long production runs The drill body is engineered to deliver stable drilling performance through a combination of a generous diameter 39 mm cutting zone and a substantial shank Ø 32 mm that promotes secure clamping. With a cutting length of 156 mm, this tool is suited to demanding through‑hole and medium‑depth drilling tasks where rigidity and chip evacuation are decisive for surface finish and roundness. The design reduces vibration, which in turn increases repeatability and lowers scrap rates in batch production. Economical operation through replaceable inserts By accepting standard Korloy WCM-06T3 inserts, the tool body keeps running costs low and maintenance quick. The indexable concept allows worn cutting edges to be exchanged in minutes, restoring original geometry without replacing the carrier. This approach supports predictable tool‑life planning and reduces overall tooling expenditure compared with solid drills, while preserving cycle times and process stability on CNC machining centres. Designed for workshop integration and handling With an overall length of 253 mm and a shank engagement length of 58 mm, the carrier is dimensioned for common toolholders and heavy‑duty clamping systems, ensuring safe torque transmission and axial stability. The unit weight of 1.38 kg gives a tangible sense of robust construction without excessive mass that would complicate handling. The body accommodates familiar mounting and balancing procedures so that setup time is minimised and machine uptime is maximised. Enquire with Metav Werkzeuge for availability, customised configurations and batch supply — call +49 2822 7131930 or email info@metav-werkzeuge.com (Metav Werkzeuge, Emmerich) Technical data Article number: U639TM Manufacturer: Teknik Makina ECLASS: 21180201 Diameter: 39 mm Overall length: 253 mm Cutting length: 156 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.38 kg Compatible inserts: WCM-06T3 Compatible insert manufacturer: Korloy Technical files: 62de7ec30f56dbb4de4dbf2d, 62de7dd9148ec6b71020ff6b FAQ What materials is this drill body suitable for? The drill body accepts Korloy WCM-06T3 indexable inserts and is suitable for a wide range of metals; material compatibility depends on the chosen insert grade and geometry. How are inserts fixed and replaced? Inserts for this drill body are clamped into the pockets designed for WCM-06T3 format; replacement restores cutting geometry quickly and reduces overall tooling costs for the U639TM drill body. Which machines can accommodate this tool? The carrier is intended for CNC drilling and milling centres with toolholders matching a 32 mm shank; the 58 mm engagement length supports heavy clamping and torque transfer. What are the benefits of the indexable system compared with solid drills? Indexable systems lower lifecycle costs through individual insert replacement, allow controlled wear management and often deliver reduced cycle times for medium‑to‑large production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
39mm Solid Drill 195mm Cutting Length 32mm Shank, 292mm Overall Length - Teknik Makina
Take advantage of the combination of extended cutting reach, secure clamping and proven insert compatibility for efficient, repeatable holemaking in series production; order via Metav Werkzeuge or consult the technical team for application advice. Indexable drill U799TM – 39 mm diameter, 195 mm cutting length (Teknik Cutting Tools) The Indexable drill U799TM is an indexable insert drill designed for medium‑to‑deep holemaking in production environments, combining long cutting reach with a robust 32 mm shank for secure clamping and stable machining. 39 mm diameter for deep-hole drilling 195 mm cutting length for long reach 32 mm shank for secure clamping Compatible with Korloy WCM-06T3 inserts Increased productivity through extended cutting reach and stable geometry The long cutting zone of 195 mm and an overall length of 292 mm allow the tool to reach into deeper bores while maintaining stability. This extended reach reduces the need for secondary operations or special tool changes, which translates into shorter cycle times and fewer machine setups. The robust geometry is engineered to minimise deflection; as a result, hole quality is preserved across longer passes and repeatability is improved for batch production. Reliable insert system for consistent hole quality and cost efficiency Compatibility with Korloy WCM-06T3 indexable inserts provides an economical approach to tool life management: worn cutting edges are replaced quickly without regrinding, keeping downtime to a minimum. The insert system supports controlled chip formation and repeatable cutting performance, which helps to reduce scrap rates and contributes to a favourable cost‑per‑hole calculation. The tool's indexable concept is particularly suitable where straight, repeatable bores are required in series work. Secure clamping and easy integration into existing toolholders The 32 mm shank diameter and a dedicated shank length of 58 mm permit confident clamping in standard collet or hydraulic toolholders; the substantial shank cross‑section supports torque transmission and vibration damping. The tool, weighing 1.52 kg, is balanced for stationary machining and can be integrated into typical milling and drilling spindles without special adaptors when the machine accepts the specified shank size. Quick mounting and predictable runout contribute to consistent surface finish and positional accuracy. Application guidance and workshop compatibility The indexable system is intended for use with Korloy inserts and can be matched to insert grades that suit a range of steels and alloys; insert selection determines the material spectrum and cutting parameters. The drill's dimensions—39 mm diameter and 195 mm cutting length—should be considered when planning fixture clearances and coolant supply. For workshops seeking to consolidate tooling, the tool's standard shank and insert pattern support rapid integration into established toolsets, reducing procurement complexity and spare‑part variants. Contact Metav Werkzeuge in Emmerich for technical consultation on application suitability, insert selection and delivery of the Teknik Cutting Tools indexable drill U799TM — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: U799TM Manufacturer: Teknik Makina Designation: Indexable drill Dimensions & weight Diameter: 39 mm Cutting length: 195 mm Overall length: 292 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.52 kg Features & compatibility Compatible insert: WCM-06T3 Suitable insert manufacturer: Korloy Indexable insert system for quick edge replacement Designed for medium‑to‑deep holemaking FAQ Which insert type does this tool accept? The indexable drill U799TM accepts Korloy WCM-06T3 indexable inserts; insert seating and clamping conform to the specified insert geometry. What drilling depth is possible with the tool? The tool provides a 195 mm cutting length within an overall length of 292 mm, enabling medium‑to‑deep bore machining where that reach is required. What shank size and clamping are required? A 32 mm shank diameter and 58 mm shank length are specified for secure clamping in standard collet or hydraulic holders compatible with that dimension. Is the U799TM suitable for high‑volume production? The U799TM, with its indexable system and extended cutting length, is designed for repeatable, high‑volume applications where quick insert changes and stable machining reduce cycle time. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
39mm Solid Drill 78mm Cutting Length 58mm Shank Length, 32mm Shank Ø - Teknik Makina
Take advantage of a robust indexable design and precise geometry to reduce cycle times and tool change frequency; the combination of a Ø 39 mm cutting diameter and 78 mm cutting length supports reliable medium‑depth holemaking. For ordering or compatibility questions, contact Metav Werkzeuge or consult the technical team. Indexable drill body U939TM — Ø 39 mm, 78 mm cutting length (Teknik Makina) The Indexable drill body U939TM is a 39 mm diameter tool body designed for indexable inserts and medium‑depth production drilling in precision machining environments Robust indexable design for high productivity Ø 39 mm cutting diameter for standard hole sizes 78 mm cutting length for medium‑deep holes 32 mm shank for secure clamping Higher throughput through indexable insert technology The body is engineered to accept SPMG 1104 inserts, enabling fast, repeatable edge changes and minimised downtime compared with solid drills. By combining a 32 mm shank with a balanced geometry and an overall length of 175 mm, the tool body offers stable cutting under cyclic loads; this reduces vibration and supports consistent hole quality across runs. The replaceable‑insert concept translates directly into a lower cost per hole and simplified tool inventory management. Quick adaptation and secure mounting for production Compatibility with leading insert suppliers (Taegutec, YG‑1) ensures ready availability of cutting grades and geometries suited to different operations. The 58 mm mounting length provides solid engagement in standard holders, while the body’s mass (1.007 kg) contributes to rigidity during plunge and peck drilling cycles. These attributes shorten setup time and help maintain spindle load stability during uninterrupted production, making the tool suitable for repeatable series work on CNC machines where predictable cycle times are essential. Built for shopfloor reliability and easy maintenance Constructed as a purpose‑built indexable drill body, the design emphasises serviceability: worn cutting edges are replaced in seconds, not hours, which supports sustained productivity and predictable maintenance intervals. The combination of a 39 mm diameter and 78 mm cutting length balances access to deeper features with chip evacuation requirements, delivering confident performance in component machining. Technical consultations are available to confirm holder compatibility or to select insert grades for specific tasks. Contact Metav Werkzeuge for tailored compatibility checks or to request delivery from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: U939TM Manufacturer: Teknik Cutting Tools (Teknik Makina) eClass: 21180201 Compatible inserts: SPMG 1104 Core specifications Cutting diameter: 39 mm Cutting length: 78 mm Shank diameter: 32 mm Shank / mounting length: 58 mm Total length: 175 mm Weight: 1.007 kg Design / Special features Compatible insert manufacturers: Taegutec, YG‑1 Indexable drill body for replaceable inserts Balanced geometry for reduced vibration FAQ Which inserts fit this drill body? The U939TM accepts SPMG 1104 indexable inserts; compatible suppliers include Taegutec and YG‑1. What holder size is required for mounting? A 32 mm shank diameter and 58 mm mounting engagement are specified for secure clamping of the tool body. How deep can this tool drill in one pass? The tool body provides a 78 mm cutting length; the achievable penetration per pass depends on machine capability and chosen insert grade. Is the U939TM suitable for series production? Yes — the indexable design and quick insert changes make the U939TM well suited to series work where reduced downtime and repeatability are priorities. What advantages do indexable inserts provide over solid drills? Indexable inserts enable rapid edge replacement, lower cost per cutting edge and flexible selection of grades for different materials, all of which support consistent cycle times. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
39mm Solid Drill 78mm Cutting Length, 58mm Shank Length - Teknik Makina
The combination of a substantial 39 mm cutting diameter, a 78 mm cutting length and a robust 32 mm shank ensures dependable machining performance and consistent cycle times; purchase and supply handled reliably through Metav Werkzeuge for immediate integration into production. Teknik Makina Solid Drill U141TM — 39 mm diameter, 78 mm cutting length The Solid Drill U141TM is a heavy‑duty indexable‑insert compatible drilling solution designed for industrial machining where stable clamping and repeatable holemaking are required 39 mm cutting diameter 78 mm cutting length 32 mm shank diameter Compatible with Korloy WCM-06T3 inserts Stable clamping for repeatable holemaking The robust 32 mm shank and overall length of 175 mm provide a stable connection to the toolholder, reducing vibration and improving repeatability in series production. A solid construction and a weight of 1.006 kg contribute to consistent cutting engagement, which translates directly into fewer rejects and less rework. In production environments where dimensional consistency matters, the reinforced shank geometry supports higher process stability and predictable tool life. Indexable‑insert compatibility to cut downtime Designed for use with Korloy WCM‑06T3 inserts, the U141TM adopts an indexable approach that separates the cutting edge from the tool body. This means worn cutting edges can be replaced quickly without changing the entire drill body, reducing machine downtime and spare‑part complexity. The 78 mm cutting length enables deeper holemaking without multiple passes, while insert interchangeability supports fast on‑machine recovery and simplified inventory of cutting edges. Fast procurement and easier integration into CNC workflows Marked under eClass 21180201 and supplied with SKU U141TM, the tool is set up for straightforward inventory and procurement. The combination of standardised insert type, a familiar 32 mm shank interface and the clear dimensional data (39 mm diameter, 175 mm overall length) makes CAM programming and tool offset entry more predictable. Backed by Metav’s supply chain and stocking in Emmerich, the tool is suitable for workshops and industrial shops seeking dependable delivery and centralised sourcing for precision tooling. For procurement, technical queries or to arrange priority delivery of the Teknik Makina Solid Drill U141TM, contact Metav Werkzeuge in Emmerich for expert advice and reliable supply coordination. Technical data Article number: U141TM Manufacturer: Teknik Makina Product name: Solid drill (Vollbohrer) Data Diameter: 39 mm Overall length: 175 mm Cutting length: 78 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.006 kg eClass: 21180201 Special features Compatible with Korloy WCM-06T3 inserts Indexable‑insert design SKU for procurement: U141TM FAQ Is this drill compatible with Korloy inserts? Yes. The Teknik Makina Solid Drill U141TM is compatible with Korloy WCM‑06T3 inserts and is supplied to accept that insert format for straightforward replacement. What hole size and depth does the tool support? The tool provides a 39 mm cutting diameter with a 78 mm cutting length and an overall length of 175 mm, enabling single‑pass drilling within that effective cutting depth. What are the shank and mounting requirements? The drill has a 32 mm shank diameter and a shank length of 58 mm; the toolholder must accept a 32 mm shank for secure clamping and repeatable positioning. How does indexable‑insert design help production? Indexable inserts such as the WCM‑06T3 allow rapid replacement of cutting edges without removing the whole drill body, reducing downtime and simplifying spare‑part management for the workshop. What identifying data is useful for procurement and CAM setup? Use SKU U141TM and eClass 21180201 for ordering and the dimensional data (39 mm diameter, 78 mm cutting length, 175 mm overall length) for CAM tool entry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Solid Carbide Long-Gauge Through Coolant Drill 160mm Cutting Length, 32mm Shank - Teknik Makina
For stable, repeatable indexable-insert drilling select the combination of a 40 mm diameter, 160 mm cutting length and a robust 32 mm shank for reliable chip control and tool life. Order the tool conveniently through Metav Werkzeuge or contact our consultants for specification matching and delivery advice. Teknik Makina U740TM Solid Drill – Ø 40 mm, 160 mm cutting length The Teknik Makina U740TM solid drill is an indexable-insert drilling solution engineered for deep-hole, high-stability operations compatible with SPMG 1104 inserts and major insert suppliers Solid-drill design for indexable inserts Compatible with SPMG 1104 insert type 40 mm diameter for stable drilling 160 mm effective cutting length High stability for deep-hole and heavy-duty drilling The design focuses on stability and repeatability: a 40 mm nominal diameter combined with an effective 160 mm cutting length provides a predictable cutting engagement that helps maintain hole accuracy over long runs. The 32 mm shank and the solid-drill body reduce deflection and vibration, which in turn lowers the risk of chatter and improves hole roundness. This configuration suits production environments where consistent hole geometry and reduced rework are priorities, and where process reliability directly supports throughput and cost-efficiency. Minimise downtime with broad insert compatibility This drill uses SPMG 1104 indexable inserts and is listed as compatible with major insert manufacturers such as Taegutec and YG-1, enabling fast tool servicing and straightforward spare-part logistics. Indexable-insert technology allows insert changes without full regrinding, shortening maintenance intervals and cutting downtime. The modular nature of insert systems also permits grade selection for different materials or cutting speeds, supporting flexible process optimisation while keeping inventory and tooling costs manageable. Practical workshop integration and predictable maintenance With an overall length of 258 mm and a clear shank engagement of 58 mm, the tool mounts cleanly in common holders and toolholders, ensuring correct clamping and axial support. The unit weight of 1.421 kg contributes to a steady centrifugal balance at operational speeds and simplifies handling during tool changes. Technical documentation and reference files are available for quick programming of CAM paths or for verification during set-up. Where machine compatibility or cutting data require confirmation, Metav’s technical advisers can supply the necessary information to integrate the drill into existing production processes. Process benefits that matter to production The core advantages derive from tool geometry and system compatibility: deeper effective cutting length for fewer passes, a robust shank for reduced runout, and standardised insert use for predictable cutting conditions. These elements support higher first-pass yields and reduce downstream rework. For manufacturers aiming to improve cycle time while maintaining hole quality, the combination of a solid-drill body and standard indexable inserts delivers an efficient balance between performance and serviceability. Contact Metav Werkzeuge today to discuss technical requirements, confirm holder compatibility and arrange delivery of the Teknik Makina U740TM solid drill via our Emmerich supply chain Technical data Article number: U740TM Manufacturer: Teknik Makina Core dimensions Diameter: 40 mm Overall length: 258 mm Cutting length: 160 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.421 kg Special features Compatible with SPMG 1104 indexable inserts Insert manufacturers: Taegutec, YG-1 Solid-drill design Files available (IDs): 62de7ec233927e49dbf3276b, 62de7dd60f56dbb4de4dbedd FAQ What insert type does this drill use? The Teknik Makina U740TM solid drill is designed for SPMG 1104 indexable inserts and accepts inserts from the listed suppliers. Is the drill suitable for deep-hole drilling? Yes. The combination of a 160 mm cutting length and a 40 mm diameter is intended to provide stable cutting conditions for deeper hole tasks. Which insert brands are compatible? Insert compatibility includes Taegutec and YG-1, enabling flexible sourcing of replacement inserts for the U740TM. How is the tool clamped and what shank size is required? The tool features a 32 mm shank diameter with a 58 mm shank engagement; correct holder selection is advised for secure clamping and minimal runout. Where can additional technical files be obtained? Technical files for the U740TM are referenced in the product data and can be provided by Metav Werkzeuge on request for CAM programming and setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Solid Carbide Shank Adapter 32mm Bore, 57mm Length - Teknik Makina
Take advantage of a precise 40 mm-to-32 mm interface and a compact 57 mm overall length to keep drilling set-ups tight and repeatable; order via Metav Werkzeuge for reliable supply or request technical guidance from our specialists. Adapter for Solid Drill – UA14TM (40 mm adapter, 32 mm bore) by Teknik Makina The Adapter for Solid Drill is a compact connection element designed to adapt solid drills with a secure internal seating for confined machining environments. Precision connection for solid drills 40 mm diameter Internal bore 32 mm for secure seating Compact length of 57 mm for tight setups Maintain drilling accuracy with a precision connection A rigid and well‑fitting coupling is essential for consistent outcomes in machining operations. The UA14TM adapter provides a 40 mm outer interface with a 32 mm internal bore, enabling a direct mechanical link that reduces lateral play and supports improved drilling accuracy. This results in fewer rework cycles and more predictable hole tolerances, which is particularly valuable in production contexts where repeatability impacts throughput. Save space and simplify machine set-up With an overall length of 57 mm, the component is designed for installations where axial clearance is limited. The compact form factor shortens the distance between spindle and tool, which can improve rigidity in constrained assemblies. Reduced tooling projection often leads to lower vibration levels during cutting, so set-up time is shortened and tool life can be optimised without complex fixturing changes. Seamless workshop integration and dependable sourcing Manufactured by Teknik Makina, the adapter is intended as a straightforward retrofit for systems using solid drills. The simple geometry supports quick insertion and removal, allowing existing tooling to be used with minimal modification. Sourcing through Metav Werkzeuge adds a further layer of assurance: stock is dispatched from Emmerich and undergoes a quality filter to support European workshop requirements, combining wide product availability with experienced technical advice. For a secure, space‑saving drill interface and expert procurement from Metav Werkzeuge, contact our advisors to confirm compatibility and arrange prompt delivery Technical data SKU: UA14TM Product: Adapter for solid drill Manufacturer: Teknik Makina Dimensions & core specifications Overall length: 57 mm Adapter diameter: 40 mm Internal bore diameter: 32 mm ECLASS: 21029216 Applications & features For use with solid drills Compact design for tight set-ups Secure seating for reduced misalignment FAQ What diameters does the adapter accommodate? The UA14TM adapter accommodates a 40 mm outer interface with a 32 mm internal bore and is made for adapting solid drills with those dimensions. Can the adapter be used where axial clearance is limited? Yes, the adapter’s 57 mm overall length is specifically suited to confined machining environments where a compact coupling is required. How does the adapter affect drilling precision? By providing a secure mechanical seating, the AA14TM component from Teknik Makina helps to maintain alignment and minimise lateral movement, supporting more consistent hole quality and reduced rework. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Solid Carbide Through Coolant Drill 120mm Cutting Length, 58mm Shank Length - Teknik Makina
Combining robust insert tooling with secure shank design, this solid drill delivers dependable deep‑hole performance and straightforward serviceability. Benefit from a 40 mm cutting diameter and 120 mm cutting length for productive, repeatable drilling cycles; order the tool via Metav Werkzeuge or consult their specialists for application advice. Solid drill U184TM – indexable insert drill (Ø 40 mm, 32 mm shank) by Teknik Makina A Solid drill U184TM engineered for industrial indexable‑insert drilling, compatible with Korloy inserts and designed for secure clamping in production environments Ø 40 mm cutting diameter 120 mm cutting length 32 mm shank diameter Compatible with Korloy WCM-06T3 inserts Built for consistent deep‑hole results with minimal setup With a Ø 40 mm cutting diameter and a 120 mm cutting length, this indexable‑insert drill is dimensioned for repeatable deep‑hole operations where tool stability matters. The 32 mm shank provides a reliable clamping interface that reduces axial run‑out when mounted in standard toolholders. The combination of cutting length and secure shank engagement supports consistent bore geometry across batch runs, while the use of replaceable inserts simplifies maintenance and keeps overall tool inventory lean. Emphasis is placed on machine‑side stability and repeatable set‑up to support predictable cycle times. Faster maintenance cycles through indexable inserts Indexable inserts compatible with WCM-06T3 geometry and Korloy standards enable rapid service intervals: worn cutting edges can be rotated or replaced without removing the entire holder from the spindle. This design lowers mean time to repair and keeps spindle downtime to a minimum. The insert system also allows targeted edge geometries for specific machining tasks, supporting a cost‑effective balance between tool life and part quality. Specified as an insert‑based solution, the U184TM suits workshops seeking economical reconditioning rather than frequent full‑tool replacement. Practical handling and workshop integration for production use An overall length of 218 mm and a shank length of 58 mm make this tool straightforward to fit into conventional holders; the stated mass of 1.295 kg gives a sense of balance when considering clamping and tool changer limits. The construction is intended for industrial use where secure mounting and simple insert replacement matter more than decorative finishes. Compatibility with Korloy‑specified inserts supports cross‑brand supply flexibility, and the SKU is designed for clear stock control in procurement and inventory systems. Technical buyers benefit from a tool that integrates into existing processes with minimal adjustments. Contact Metav Werkzeuge for tailored application advice on the Teknik Cutting Tools solid drill U184TM and to arrange supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U184TM Manufacturer: Teknik Makina Eclass: 21180201 Facts Diameter: 40 mm Cutting length: 120 mm Overall length: 218 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.295 kg Special features Compatible inserts: Korloy WCM-06T3 Insert type: WCM-06T3 Indexable insert system Model / SKU: U184TM FAQ What insert type fits this drill? The drill accepts WCM-06T3 indexable inserts; compatibility is specified for Korloy insert geometries. What are the key dimensions for clamping? Clamping relies on a 32 mm shank diameter with a 58 mm shank length; overall tool length is 218 mm. Is the tool suitable for repeated production use? Yes, the design uses replaceable inserts and a robust shank to support repeatable production cycles with reduced downtime. How heavy is the tool and does weight affect handling? The tool weighs 1.295 kg; the mass is accounted for in holder selection and tool‑changer limits for stable operation. Which manufacturer produced this tool? This indexable‑insert drill is supplied by Teknik Makina and listed under SKU U184TM for procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Solid Carbide Through Coolant Drill 80mm Cutting Length, 178mm Overall - Teknik Makina
Benefit from the robust combination of a 40 mm cutting diameter, an 80 mm effective cutting length and a rigid 32 mm shank for stable, repeatable holemaking in production environments — order the indexable insert drill directly via Metav Werkzeuge or consult our specialists for application support. Teknik Makina Indexable Insert Drill U142TM — 40 mm, 80 mm cutting length The Indexable insert drill U142TM is an industrial-grade drilling solution designed for precision through-hole operations in CNC turning and milling centres, accepting Korloy WCM-06T3 inserts. 40 mm cutting diameter 80 mm cutting length 32 mm shank for rigid clamping Compatible with Korloy WCM-06T3 inserts Consistent hole quality through rigid design A larger-diameter tool demands a stable connection between toolholder and spindle; the 32 mm shank of this indexable drill provides the necessary rigidity to minimise vibration and improve concentricity. The result is more consistent hole geometry and surface finish in repetitive production runs. For process planners, reduced runout means fewer rejects and less rework, enhancing overall throughput without altering existing clamping protocols. Fast servicing and predictable productivity with indexable inserts Using Korloy WCM-06T3 indexable inserts reduces downtime compared with regrinding solid tools: worn edges are exchanged swiftly, restoring cutting geometry almost instantly. The 80 mm cutting length specifies the available flute engagement and supports deeper through-holes without multiple tool changes. This combination translates into predictable cycle times and simpler inventory management, since insert stock is easier to store and rotate than whole solid drills. Designed for production workflows and simple integration With an overall length of 178 mm and a documented weight of 1.007 kg, the tool balances reach with handling ease during set-up. The U142TM format supports conventional toolholders and is configured for industrial workflows where repeatability and interchangeability are priorities. Traceable identification (SKU U142TM) and a compact file record simplify procurement and maintenance planning, while the tool’s modular nature contributes to lower total cost of ownership through controlled spare-part consumption. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools U142TM indexable insert drill can improve drilling consistency in the workshop; specialist advice and application recommendations are available from Metav Werkzeuge by email or phone Technical data Article number: U142TM Manufacturer: Teknik Makina Product name: Indexable insert drill SKU: U142TM Numerical data Diameter: 40 mm Cutting length: 80 mm Shank diameter: 32 mm Shank length (clamp length): 58 mm Overall length: 178 mm Weight: 1.007 kg eClass: 21180201 Features Compatible insert: WCM-06T3 Compatible insert manufacturer: Korloy Files: 62de7ec4bd24461b3d5f7a4f, 62de7ddb0f56dbb4de4dbedf FAQ What inserts does this drill use? The U142TM accepts Korloy WCM-06T3 indexable inserts, allowing quick edge changes and reduced tool downtime. How long is the effective cutting length? The effective cutting length is 80 mm, which supports deeper through-hole operations without intermediate tool changes. What clamping diameter is required? The tool features a 32 mm shank, so a holder or chuck rated for that shank diameter is required to ensure stable clamping. Is the overall length suitable for standard toolholders? With an overall length of 178 mm, the drill is compatible with common holder configurations used in production CNC equipment. Where can the tool be purchased or specified for an application? Metav Werkzeuge supplies the Teknik Cutting Tools U142TM and can provide specification details to match the drilling process and holder selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Solid Drill 120mm Cutting Length 58mm Shank Length, 218mm Overall - Teknik Makina
Take advantage of a robust Ø 40 mm solid drill with a 120 mm cutting length and a 32 mm shank that ensures secure clamping and consistent hole quality; order directly via Metav Werkzeuge or contact our consultants for application advice. Solid drill — Teknik Makina — Ø 40 mm, 120 mm cutting length Solid drill for industrial indexable-insert drilling, designed for deep, repeatable holes in production and workshop environments Compatible with SPMG 1104 inserts Ø 40 mm with 120 mm cutting length 32 mm shank for secure clamping Suited for Taegutec and YG-1 inserts Increased throughput through proven cutting geometry The solid drill delivers reliable material removal thanks to its extended 120 mm cutting length, which allows longer uninterrupted cuts and reduces tool changes during series operations. The tool’s design translates directly into improved throughput: fewer interruptions for rework and a steadier cycle time. The combination of a substantial cutting length and balanced mass supports steady cutting forces, helping to maintain precision even in repetitive production runs. Secure clamping and repeatable hole accuracy A 32 mm shank provides a rigid connection to the machine spindle or holder, reducing runout and vibration at higher feed rates. This structural stability leads to more accurate hole diameters and better surface finishes, lowering scrap rates and post-process work. The tool’s construction focuses on dimensional stability, so the drilling process is more predictable — a practical advantage when meeting tight tolerances on batches or assemblies. Broad compatibility to simplify tooling logistics Designed for indexable-insert operation with SPMG 1104 plates and compatible with manufacturers Taegutec and YG-1, the tool reduces the number of specialised single-use cutters required in the workshop. Using common insert families speeds up changeovers, simplifies inventory and keeps running costs under control. The drill’s balance between a robust body and standard insert format supports both maintenance ease and economic efficiency on the shop floor. For professional procurement and technical guidance on Teknik Makina solid drills, contact Metav Werkzeuge for purchase and tailored application support at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: U840TM Manufacturer: Teknik Makina SKU: U840TM Facts Diameter: 40 mm Cutting length: 120 mm Overall length: 218 mm Shank diameter: 32 mm Shank length (relevant part): 58 mm Weight: 1.238 kg Special features Compatible insert: SPMG 1104 Suitable insert manufacturers: Taegutec, YG-1 Product type: solid drill (indexable-insert body) FAQ What insert type does this drill use? The tool accepts SPMG 1104 indexable inserts, which are commonly available from Taegutec and YG-1 and offer economical replacement in production. Is the shank suitable for standard holders? Yes, the 32 mm shank is dimensioned for secure clamping in standard drill holders and collet systems that accept that diameter. What hole depth can be achieved reliably? With a 120 mm cutting length and a total length of 218 mm, the tool is intended for deeper through and blind drilling where extended engagement is required. Which manufacturers’ inserts are compatible? The drilling body is compatible with inserts from Taegutec and YG-1, easing procurement and stock management for shops using those brands. How does this drill support production consistency? The combination of a rigid 32 mm shank and an extended cutting length provides stable cutting conditions, resulting in repeatable hole diameters and reduced rework for series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Solid Drill 160mm Cutting Length 58mm Shank Length, 32mm Shank Diameter - Teknik Makina
Take advantage of a robust indexable solution that combines a Ø 40 mm cutting diameter with a 160 mm cutting length for stable, repeatable holemaking; order via Metav Werkzeuge or request guidance from our consultants for seamless workshop integration. Indexable drill by Teknik Makina — Ø 40 mm, 160 mm cutting length A compact industrial indexable drill designed for insert drilling in medium‑duty metalworking environments, compatible with Korloy WCM‑06T3 inserts. High rigidity with 32 mm shank 160 mm cutting length for deep holes Compatible with Korloy WCM‑06T3 inserts Overall length 258 mm for extended reach Improved process stability through a rigid tool design The tool body delivers consistent hole quality by combining a 32 mm shank with a substantial mass of 1.46 kg, which reduces runout and vibration during drilling. This mechanical stability preserves insert life and helps to maintain concentricity over long production runs. Operators benefit from predictable performance when machining repetitive batches, while production planners can count on reduced scrap rates and fewer tool changes per shift. Fast reconditioning and cost‑effective indexable concept Designed for use with Korloy indexable plates (type WCM‑06T3), the tool supports quick insert replacement without the need for regrinding solid drills. This modular approach lowers tooling costs over time and shortens downtime: worn cutting edges can be replaced in minutes, restoring cutting capacity almost immediately. The 160 mm cutting length enables deeper hole capability while the replaceable insert system keeps running costs transparent and manageable for volume operations. Simple integration and reliable mounting in machine spindles With an Ø 40 mm cutting diameter, 258 mm overall length and 58 mm shank engagement length, the drill body fits common toolholders and is suitable for straightforward installation in standard drilling and milling spindles. The defined shank diameter ensures secure clamping and repeatable concentricity; the balanced geometry helps to maintain tool life and machine spindle health. Where machine capability or holder selection is unclear, Metav Werkzeuge offers technical advice to confirm compatibility and optimise the setup. For reliable machining with the Teknik Makina indexable drill, contact Metav Werkzeuge in Emmerich for tailored application support and prompt supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: U640TM Manufacturer: Teknik Makina Product type: Indexable drill body Designation: Vollbohrer (indexable drill) Compatible inserts: WCM‑06T3 (Korloy) Facts Diameter: Ø 40 mm Cutting length: 160 mm Overall length: 258 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.46 kg Special features Compatibility with Korloy WCM‑06T3 inserts Indexable insert system for rapid reconditioning Suitable for medium‑duty production drilling Manufacturer: Teknik Makina FAQ What insert type is required for this drill? The drill is designed for WCM‑06T3 indexable plates; Korloy inserts of this designation are compatible with the drill body. Can the tool be clamped in standard holders? Yes — the 32 mm shank diameter and 58 mm engagement length are compatible with common toolholders that accept a 32 mm shank. What hole depth can be achieved with this drill? The drill offers a 160 mm cutting length, while the overall length of 258 mm provides additional reach; achievable hole depth will depend on holder and machine setup. Is this drill suitable for high‑volume production? The indexable design and quick insert changes make the tool well suited to repetitive production where reduced downtime and lower per‑hole tooling cost are priorities. Which manufacturer produced this drill body? The tool is supplied by Teknik Makina and specified as an indexable drill body with SKU U640TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Solid Drill 200mm Cutting Length 32mm Shank, 298mm Overall Length - Teknik Makina
Take advantage of a robust indexable drill body that combines reliable insert compatibility and long cutting reach for repeatable production results – ideal for batch drilling where downtime must be minimised. Order supply or request technical clarification via Metav Werkzeuge for fast delivery and expert advice. Indexable drill body U800TM – 40 mm diameter, 200 mm cutting length (Teknik Makina) The indexable drill body U800TM offers a heavy‑duty solution for industrial drilling tasks, designed as a replaceable‑insert drill body for workshop and production use 40 mm cutting diameter Compatible with Korloy WCM-06T3 inserts 200 mm effective cutting length 32 mm shank diameter Consistent hole quality and extended reach for series production The U800TM is built to give a stable drilling process across longer depths: with a 40 mm cutting diameter and a 200 mm cutting length, the tool reduces the need for multiple operations by reaching deeper in a single pass. The 298 mm overall length maintains the necessary projection for many workpieces while keeping runout and vibration in check. For production planners, this combination means fewer tool changes, steady cycle times and predictable component tolerances. The indexable design ensures flank wear is managed through insert replacement rather than full‑body disposal, supporting economical production runs. Fast service cycles through standard insert compatibility Compatibility with Korloy WCM-06T3 inserts gives clear operational benefits: stocked, readily available inserts shorten maintenance intervals and lower tooling inventory complexity. The indexable concept allows rapid insert replacement with minimal setup time, which translates into higher machine uptime and a more favourable cost‑per‑hole calculation. Where process continuity matters, proven insert standards and straightforward clamping geometry help maintain cutting performance without trial‑and‑error optimisation. Secure clamping for repeatability and tool life A 32 mm shank and a 58 mm clamping length provide a secure connection to the toolholder, reducing micro‑movement during cutting and improving repeatability across cycles. The tool’s mass (approx. 1.49 kg) contributes to dampening chatter on heavier machines, aiding surface finish and hole cylindricity. The robust interface supports consistent axial forces and contributes to stable chip evacuation when paired with correctly selected inserts and coolant strategies. For operators, this means simpler process set‑up and fewer adjustments between batches. Where this drill body fits in workshop practice The U800TM suits general production environments where replaceable‑insert drilling is preferred over solid carbide options for economic reasons. It is particularly relevant in small to medium series production and for maintenance operations requiring quick, reliable restoration of tool geometry. Metav Werkzeuge’s inventory and quality filter in Emmerich make acquiring matching inserts and replacement bodies straightforward, backed by decades of supply experience and a broad product portfolio that reduces vendor complexity. This combination supports a predictable supply chain and helps maintain continuous production. For robust, insert‑based drilling with Teknik Makina’s U800TM, contact Metav Werkzeuge for a tailored supply proposal and technical guidance – info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U800TM Manufacturer: Teknik Makina Diameter: 40 mm Overall length: 298 mm Cutting length: 200 mm Shank diameter: 32 mm Shank clamping length: 58 mm Weight: 1.49 kg Compatible inserts: Korloy WCM-06T3 Product type: indexable drill body SKU: U800TM FAQ Which inserts fit this drill body? The U800TM is designed for Korloy WCM-06T3 inserts, enabling quick replacement and standardised stock management. What are the key dimensions to check for machine compatibility? Check the 32 mm shank diameter, the 58 mm clamping length and the 298 mm overall length to ensure proper fit in the chosen toolholder and to verify reach requirements. Is the U800TM suitable for deep-hole drilling in series production? Yes. With a 200 mm cutting length and a 40 mm cutting diameter, the U800TM is optimised for longer drill engagement while maintaining stability for serial operations. How does the indexable design affect operating costs? The indexable concept reduces the need to replace the entire tool body; worn inserts are changed instead, lowering tooling expenditure and shortening downtimes compared with one‑piece tools. What machine types typically use this drill body? The U800TM is intended for use on machining centres and drill heads that accept a 32 mm shank and offer sufficient spindle power and rigidity for a 40 mm diameter drill. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Through Coolant Solid Drill 80mm Cutting Length 58mm Shank Length, 32mm Shank Diameter - Teknik Makina
Take advantage of the combination of robust 40 mm diameter, 80 mm cutting length and proven compatibility with SPMG 1104 indexable inserts for efficient, repeatable hole-making; order directly via Metav Werkzeuge or consult our specialists for cutting data and holder recommendations. U940TM insert drill body — 40 mm diameter, 32 mm shank (Teknik Makina) U940TM insert drill body for medium‑deep, indexable drilling in metalworking and CNC applications 40 mm diameter for productive metal removal 80 mm effective cutting length for medium‑deep holes 32 mm shank for standard toolholders and secure clamping Compatible with SPMG 1104 indexable inserts Accurate, repeatable holes through indexable insert technology The U940TM insert drill body is engineered for consistent hole quality by combining a substantial 40 mm diameter with an 80 mm cutting length. Using indexable inserts such as SPMG 1104 enables fast insert changing and consistent cutting geometry, which reduces setup time and ensures reproducible hole tolerances. For operations that prioritise cycle time and part uniformity, the replaceable insert system delivers predictable results and a lower cost per hole compared with solid tools. Rigidity and mounting that stabilise the machining process A 32 mm shank diameter and a shank length of 58 mm provide secure clamping in conventional toolholders, reducing runout and vibration during drilling. The tool’s overall length of 178 mm and mass (approx. 1.02 kg) are balanced to maintain stability while allowing sufficient reach for standard machining envelopes. Improved rigidity directly translates into better surface finish and longer insert life, making the tool suitable for serial production where process stability is critical. Flexible tooling economy with broad insert compatibility Compatibility with insert manufacturers Taegutec and YG‑1 widens sourcing options and reduces dependence on a single supplier. The use of standard SPMG 1104 inserts simplifies stock management: fewer spare parts, faster changeovers and predictable tooling costs. For manufacturers seeking scalable solutions, the insert system supports straightforward tool optimisation — swap inserts for different grades or coatings without replacing the drill body, preserving capital investment in the holder. Practical integration into production and quality workflows The U940TM’s specifications make it straightforward to integrate into existing indexable drilling setups and CNC workflows. The tool’s geometry supports reliable chip evacuation over the 80 mm cutting length, while the defined shank can be clamped using standard fixtures to maintain concentricity. For technicians and process planners, the indexable approach reduces downtime for resharpening and allows planned insert changes to fit maintenance windows, improving overall equipment effectiveness. Contact Metav Werkzeuge for tailored cutting data, holder compatibility checks and delivery options for the Teknik Makina U940TM insert drill body; Metav’s specialists at Parkring 45 in Emmerich are available by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U940TM Manufacturer: Teknik Makina Product designation: Insert drill body (Vollbohrer) eClass: 21180201 Dimensions and core data Diameter: 40 mm Overall length: 178 mm Cutting length: 80 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.02 kg Compatibility and features Compatible inserts: SPMG 1104 Compatible insert manufacturers: Taegutec, YG‑1 Suitable for indexable insert drilling systems FAQ Which inserts fit the tool and which brands are supported? The U940TM insert drill body accepts SPMG 1104 inserts; compatible manufacturers listed for this tool include Taegutec and YG‑1, providing options for grades and coatings. What are the key dimensions for clamping and setup? Key dimensions are a 40 mm diameter, 32 mm shank diameter, 58 mm shank length, 80 mm cutting length and an overall length of 178 mm, which assists in selecting suitable holders and setting offsets. Is the tool suitable for medium‑deep hole machining? With an 80 mm cutting length the U940TM is designed for medium‑deep holes where indexable inserts offer productivity and economical insert changes compared with regrinding solid drills. How does the indexable system reduce tooling costs? Using replaceable SPMG 1104 inserts on the U940TM reduces expenditure on complete tools by allowing only the insert to be replaced when worn, and enables grade changes to match workpiece materials without replacing the drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
41mm Solid Drill 123mm Cutting Length, 58mm Shank Length - Teknik Makina
Benefit from a robust, indexable design combined with a long cutting reach and secure 32 mm shank for consistent holemaking in production environments; order directly via Metav Werkzeuge or consult our specialists for application advice. Indexable drill U186TM — Ø 41 mm, 123 mm cutting length (Teknik Makina) The Indexable drill U186TM is an insert-drilling solution engineered for demanding holemaking tasks where fast insert changes and repeatable results are required Ø 41 mm cutting diameter 123 mm effective cutting length Compatible with Korloy WCM-06T3 inserts Robust 32 mm shank for secure clamping High-efficiency holemaking with replaceable inserts The U186TM is designed as an indexable drill to deliver efficient material removal while reducing tooling costs. By using replaceable inserts such as Korloy WCM-06T3, cutting edges can be renewed in seconds without regrinding, which lowers per-hole costs and shortens machine downtime. The tool’s geometry supports stable chip evacuation and predictable cutting forces; this means cycle times can be optimised and process planning becomes more reliable. For production-focused shops, the combination of insert economy and predictable performance is a clear operational advantage. Stable clamping and consistent surface quality A substantial 32 mm shank provides secure clamping and reduces vibration during spindle rotation, which helps maintain hole tolerance and surface finish across long runs. With a 41 mm nominal diameter and a 123 mm cutting length, the tool reaches deeper bores while the 232 mm overall length preserves access to recessed features. These dimensions support both tooling rigidity and reach, so hole positional accuracy and roundness are improved. Selecting the correct clamping system and ensuring runout is minimised will further enhance repeatability on the shop floor. Practical integration and straightforward maintenance This indexable solution has been configured for straightforward integration into CNC drilling cycles and machining centres. Insert seating and clamp design are optimised for quick replacement of WCM-06T3 inserts to keep set-up time to a minimum. Routine inspection of the insert pockets and a clean coolant supply extend component life and maintain cutting stability. If clarification is needed about insert grades or cycle parameters, technical guidance is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to ensure correct selection and safe operation. For application support or purchase coordination from Metav Werkzeuge in Emmerich, please contact our specialists at +49 2822 7131930 or info@metav-werkzeuge.com to check compatibility and delivery options for the Teknik Makina U186TM. Technical Data Article number: U186TM Manufacturer: Teknik Makina Type: Indexable drill Facts Diameter: 41 mm Cutting length: 123 mm Total length: 232 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.465 kg Special features Compatible with Korloy WCM-06T3 inserts Designed for quick insert replacement Suited for CNC drilling cycles FAQ Which inserts fit this drill? The drill accepts Korloy WCM-06T3 inserts; the seating is specified for this insert type to ensure correct geometry and chip control. What is the maximum effective drilling depth? The effective cutting length is 123 mm, which defines the practical drilling depth without extended tooling or special adapters. Which shank size is required for clamping? A 32 mm shank is provided for secure clamping; appropriate collet or holder selection is advised to minimise runout. Is the tool suitable for CNC machining centres? Yes, the indexable design and dimensions (overall length 232 mm) make it suitable for integration in CNC drilling cycles and machining centres. How are worn inserts replaced? Worn inserts are replaced by loosening the clamp screw, exchanging the WCM-06T3 insert and re-torquing per the tool manufacturer’s instructions to maintain cutting geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
42mm Solid Drill 126mm Cutting Length 58mm Shank Length, For WCM-06T3 Inserts - Teknik Makina
Benefit from the combination of a robust indexable drill body, a substantial Ø 42 mm cutting diameter and a 126 mm cutting length for reliable, high-throughput machining; order directly via Metav Werkzeuge or consult our specialists for application support. U188TM indexable drill body — 42 mm diameter, 126 mm cutting length (Teknik Makina) The U188TM indexable drill body is engineered for production drilling where repeatability and quick insert changes are essential, suitable for CNC machining environments using Korloy WCM‑06T3 inserts *Indexable drill body for insert WCM-06T3 *Ø 42 mm effective diameter *126 mm cutting length for deep holes *32 mm shank with 235 mm overall length Stable heavy-duty cutting for consistent cycle times The design focuses on delivering stable cutting performance in repetitive drilling operations. With an effective diameter of 42 mm and a cutting length of 126 mm, the tool enables deeper holes without compromising rigidity. The solid construction reduces vibration, which in turn helps to maintain hole geometry and surface quality over long production runs. This stability translates into predictable cycle times and fewer rejected parts, supporting efficient workflow in a production setting. Quick insert changes for lower downtime and cost control Compatibility with WCM‑06T3 indexable inserts from Korloy shortens maintenance intervals and lowers tooling costs. The insert system allows rapid replacement of cutting edges without the need to regrind or replace the whole tool, keeping machines productive. For purchasers, this means a favourable cost‑per‑hole calculation: worn edges are swapped out quickly, minimising machine idle time and simplifying tool inventory management in the workshop. Secure clamping and workshop integration A 32 mm shank and an overall length of 235 mm provide a robust interface for most toolholders and adaptors used in machining centres. The drill body includes a 58 mm head receptacle (for the cutting assembly), which helps ensure correct seating and repeatable positioning of the inserts. The unit’s mass (approx. 1.646 kg) contributes to dampening during cutting, improving concentricity and supporting consistent results across batches. Application guidance and suitability for production use This indexable tool is intended for industrial drilling tasks in production environments where insert systems are preferred for their economy and speed of service. The geometry and cut length suit standard deep‑drilling operations on workpieces where an indexable solution is chosen to balance performance and running costs. For integration into an existing tool pool, the compatibility with Korloy inserts simplifies procurement and matching with commonly used grades and geometries. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina U188TM indexable drill body into production and to secure reliable supply from our European distribution hub in Emmerich. Technical data Article number: U188TM Manufacturer: Teknik Makina Facts Diameter: 42 mm Cutting length: 126 mm Shank diameter: 32 mm Overall length: 235 mm Weight: 1.646 kg Special features Compatible inserts: WCM-06T3 Insert manufacturer compatibility: Korloy Cutting head length: 58 mm SKU: U188TM FAQ What insert type does this drill body use? The U188TM drill body is designed for WCM‑06T3 indexable inserts, allowing quick replacement of cutting edges. Which insert manufacturers are compatible? Compatibility is confirmed for Korloy inserts with the specified WCM‑06T3 geometry for reliable fit and performance. Is the shank size suitable for standard toolholders? Yes, the component has a 32 mm shank, which matches common toolholders used in machining centres and reduces the need for special adaptors. What is the maximum cutting length available on the tool? The tool provides a 126 mm cutting length, enabling productive deep‑hole drilling without compromising stability. How does the U188TM reduce downtime in production? By using indexable inserts, the U188TM allows rapid edge replacement rather than full tool replacement or regrinding, cutting maintenance time and lowering operating costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
43mm Solid Drill 129mm Cutting Length 58mm Shank Length, 32mm Shank - Teknik Makina
Take advantage of the combination of precise hole-making, robust mounting and proven indexable-insert compatibility for efficient production cycles; order the drill body directly via Metav Werkzeuge or consult our specialists for batch planning and technical advice. Drill body U190TM – indexable-insert compatible, Ø 43 mm | Teknik Makina The Drill body U190TM is an indexable-insert drill body designed for machining tasks requiring a 43 mm nominal diameter and an extended cutting reach of 129 mm, suitable for workshops and production lines seeking repeatable hole-making performance Ø 43 mm nominal diameter Cutting length 129 mm for deeper holes Compatible with WCM-06T3 indexable inserts Shank Ø 32 mm, mounting length 58 mm Precise machining performance for consistent hole quality This drill body delivers repeatable hole geometry by combining a stable body design with a long effective cutting length. The cutting length 129 mm and total length 239 mm enable operations that go beyond standard through-hole depths while maintaining concentricity. In practice, the solid construction reduces runout and vibration, which in turn improves hole tolerance and surface finish. The result is fewer reworks and a steadier production output when pairing the tool with appropriately specified indexable inserts. Secure mounting and proven insert compatibility Engineered for reliable clamping, the tool features a shank Ø 32 mm and a mounting length 58 mm, providing a robust connection to the toolholder and minimising movement under cut. The body is supplied for use with WCM-06T3 indexable inserts and is confirmed compatible with inserts from Korloy, enabling straightforward reconditioning on the insert level rather than replacing the whole tool. This approach shortens downtime and simplifies tool inventory management in workshop environments. Productivity gains through practical design By combining an extended cutting reach with a compact mounting footprint, the drill body supports efficient cycle times and predictable tool life. The relatively substantial mass (weight 1.726 kg) contributes to stability during machining, reducing chatter on medium-duty to heavy-duty passes. For production planners, this means improved process reliability and the ability to schedule longer uninterrupted runs, provided that cutting data and insert grades are adapted to the material being machined. Clear technical attributes to support procurement and setup All key dimensions and compatibility data are explicitly available for planning: Ø 43 mm diameter, cutting length 129 mm, total length 239 mm, and acceptance of WCM-06T3 inserts from Korloy. These measurable characteristics simplify fixture design, toolholder selection and CAM programming. For purchasing and stock control, the SKU U190TM and the manufacturer specification from Teknik Makina can be referenced directly in orders and tool lists to avoid ambiguity. For tailored supply quantities, technical coordination or to discuss integration of the Teknik Makina drill body into existing tool systems, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for precise support and next steps Technical data Article number: U190TM Manufacturer: Teknik Makina Product type: Drill body (indexable-insert compatible) Key dimensions Nominal diameter: 43 mm Cutting length: 129 mm Total length: 239 mm Shank diameter: 32 mm Shank/mounting length: 58 mm Weight: 1.726 kg Compatibility & features Compatible inserts: WCM-06T3 Recommended insert supplier: Korloy Brand: Teknik Makina FAQ Which inserts fit the drill body U190TM? The U190TM drill body is built for WCM-06T3 indexable inserts and is compatible with Korloy insert grades specified for that pocket geometry. What are the main dimensions of the U190TM drill body? Key dimensions include a nominal diameter of 43 mm, cutting length of 129 mm and a total length of 239 mm, which should be used for fixture and holder checks. What shank size is required for mounting? The tool requires a holder that accepts a shank diameter of 32 mm with a mounting length of 58 mm to ensure secure clamping and stable machining. Is the U190TM suitable for deeper hole drilling? With a cutting length of 129 mm and an overall length of 239 mm, the U190TM drill body is suitable for medium to deeper hole applications, provided the correct insert grade and cutting data are selected. What handling considerations apply given the tool mass? The U190TM has a weight of 1.726 kg; this contributes to machining stability but should be considered for tool-change procedures and holder balance to maintain optimal spindle performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
44mm Solid Drill 132mm Cutting Length 58mm Shank Length, 32mm Shank - Teknik Makina
Benefit from precise, long-reach drilling combined with reliable insert compatibility and secure clamping for consistent production throughput; order the tool directly via Metav Werkzeuge or consult the technical team for application support. Vollbohrer U192TM — Indexable insert drill body with Ø 44 mm and 132 mm cutting length (Teknik Makina) The Vollbohrer U192TM is an indexable drill body designed for industrial drilling tasks, compatible with Korloy WCM-06T3 inserts and intended for integration into CNC and production drilling setups Ø 44 mm cutting diameter 132 mm effective cutting length 32 mm shank diameter for secure clamping Compatible with Korloy WCM-06T3 inserts Robust construction, weight 1.916 kg Increased productivity through extended cutting reach The U192TM drill body delivers a 132 mm cutting length paired with a Ø 44 mm drill diameter, enabling deep or stepped holes without frequent tool changes. The extended effective length reduces cycle interruptions and supports continuous operation in series production. By combining long reach with a stable body design, the tool helps to maintain consistent chip evacuation and stable cutting conditions, which in turn contributes to measurable productivity gains and a favourable cost-per-hole ratio. Stable clamping and repeatable runout control A 32 mm shank diameter with a 58 mm shank length ensures secure clamping in standard toolholders, improving concentricity and minimising runout. The relatively heavy construction (approx. 1.916 kg) increases mass damping, which helps to reduce vibration in moderate-duty drilling operations. These mechanical characteristics support repeatable hole quality and dimensional consistency across batches, making the drill body suitable for demanding repeat-production contexts where process stability is critical. Economical indexable system with Korloy compatibility The body accepts Korloy WCM-06T3 indexable inserts, allowing only the cutting tips to be replaced rather than the entire tool. This approach lowers tooling expenses and shortens maintenance intervals while preserving cutting-edge geometry. Compatibility with an established insert designation simplifies spare-part logistics and reduces setup time when inserts are exchanged, yielding a clear operational advantage for workshops and production lines seeking efficient tool maintenance. Compact overall dimensions for integration and handling With an overall length of 242 mm, the drill body balances reach with manageable tool envelope for installations in multi-axis machines and gang-tooling setups. The combination of measured overall length and a robust body design supports straightforward storage and handling procedures while contributing to safe, predictable machine integration. The tool's specifications make it well suited for incorporation into standard cutting-tool inventories and for coordinated supply via established distributors. For application advice, delivery options and near-site availability of the Teknik Makina U192TM, contact Metav Werkzeuge for tailored technical guidance and fast dispatch from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930. Technical data Article number: U192TM Manufacturer: Teknik Makina Product name: Vollbohrer Compatible insert manufacturer: Korloy Compatible insert type: WCM-06T3 Facts Diameter: 44 mm Cutting length: 132 mm Overall length: 242 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.916 kg Special features Indexable insert drill body Compatible with Korloy WCM-06T3 inserts Robust construction for production use FAQ What insert type fits this drill body? The drill body accepts Korloy WCM-06T3 inserts; the U192TM is supplied as an indexable system designed for that insert designation. Which shank size is specified for clamping? Clamping is specified for a 32 mm shank diameter with a 58 mm shank length on the U192TM to ensure secure toolholder engagement. What are the main dimensions to check before machine installation? Key dimensions are Ø 44 mm diameter, 132 mm cutting length and 242 mm overall length for the U192TM drill body. Is the tool suited for series production? Yes, the indexable design and long cutting length make the U192TM suitable for series production where reduced tool-change frequency and consistent hole quality are required. How does insert replacement affect operating costs? Using replaceable Korloy inserts on the U192TM lowers overall tooling costs because only worn inserts are replaced, reducing material waste and downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45mm Solid Drill 135mm Cutting Length 247mm Overall Length, 40mm Shank - Teknik Makina
The robust combination of a 45 mm cutting diameter, a 135 mm cutting length and a stout 40 mm shank ensures stable drilling performance and predictable tool life; order the drill directly via Metav Werkzeuge or contact our consultants for application advice. Indexable drill body (Vollbohrer) – Ø 45 mm, 40 mm shank – Teknik Makina An indexable drill body designed for medium‑to‑heavy duty drilling where replaceable Korloy inserts reduce downtime and running costs 45 mm cutting diameter 135 mm cutting length 40 mm shank diameter Compatible with Korloy WCM‑06T3 inserts Precision and stability for reliable holemaking The heavy‑duty drill body delivers consistent hole quality through a combination of a wide 45 mm diameter and a substantial 40 mm shank, which together reduce run‑out and increase clamping rigidity. For production environments where repeatability matters, the instrumented geometry supports steady cutting conditions and predictable results. The solid overall length of 247 mm and the specified cutting length of 135 mm permit deep machining without frequent tool changes, while the tool mass of 2.238 kg contributes to vibration damping during engagement. These characteristics translate into stable cycle times and fewer scrap parts in batch production. Economic advantage through indexable inserts By accepting WCM‑06T3 indexable inserts from Korloy, the drill body minimises tooling expenditure and maintenance time. Worn inserts are exchanged rapidly without removing the entire drill from the spindle, reducing machine downtime and inventory of complete tools. The insert system also enables tailored edge geometry choices to match process requirements, improving material removal rates or surface finish as required. This approach supports a clear cost‑benefit logic: replacement of small inserts rather than whole drills keeps running costs down while maintaining high cutting performance. Integration and setup benefits for workshop workflows The drill’s 40 mm shank diameter and 68 mm specified attachment length simplify clamping into standard holders and reduce the need for special adaptors. The overall tool geometry is designed for straightforward installation and predictable balancing, making it suitable for conventional spindles and many CNC toolholders found in machine shops. Compatibility notes such as the accepted Korloy WCM‑06T3 insert type are explicitly stated to support rapid procurement and correct tool setup. Technical continuity from cutting length through to shank dimensions aids process planning and tool management in serial production. Choose the Teknik Makina indexable drill body via Metav Werkzeuge for dependable supply and application support — contact Metav Werkzeuge’s specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored machining advice Technical data Article number: U194TM Manufacturer: Teknik Makina Product: Indexable drill body (translated name) Core dimensions Diameter: 45 mm Cutting length: 135 mm Shank diameter: 40 mm Shank attachment length: 68 mm Overall length: 247 mm Weight: 2.238 kg Compatibility & features Compatible inserts: WCM‑06T3 Compatible insert manufacturer: Korloy FAQ What insert type fits this drill body? The drill body accepts Korloy WCM‑06T3 indexable inserts; this specification is supplied with the Teknik Makina U194TM item. What are the key dimensions to check before ordering? Verify the 45 mm cutting diameter, 40 mm shank diameter and the 247 mm overall length to ensure correct holder fit and required drilling depth. Is the tool suitable for deep hole drilling in production? With a 135 mm cutting length and a robust shank, the design of the Teknik Makina indexable drill body supports deeper holes with improved stability compared with shorter instruments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
46mm Solid Drill 138mm Cutting Length, 40mm Shank - Teknik Makina
Take advantage of a stable, large-diameter insert drill that combines proven insert compatibility with a long cutting reach for efficient deep-hole machining; order directly via Metav Werkzeuge or request technical advice for machine pairing. Indexable drill U196TM – Ø 46 mm, 138 mm cutting length (Teknik Cutting Tools) Indexable drill U196TM designed for demanding large-diameter drilling tasks with insert compatibility for industrial production Indexable design for Korloy WCM-0804 inserts Ø 46 mm for large-diameter drilling Cutting length 138 mm for deep holes Robust 40 mm shank for secure clamping Stable large-diameter performance for reliable holemaking The indexable drilling tool is engineered to deliver consistent results when machining larger bores. With a nominal Ø 46 mm diameter and 138 mm cutting length, the tool provides an extended engagement zone that reduces the need for multiple passes. Users benefit from a predictable cutting process and improved cycle-time planning due to the tool’s geometry, which supports controlled chip evacuation and steady feed rates. This focus on measurable performance helps maintain part tolerances and reduces rework. Insert compatibility that supports fast tool changes and low running costs Compatibility with Korloy WCM-0804 inserts means quick blade replacement and straightforward reconditioning of cutting edges. The insert-based concept reduces downtime compared with regrinding solid cutters and keeps consumable costs transparent. For workshops transitioning to indexable systems, the result is a clearer cost-per-hole calculation and simplified inventory: spare inserts replace the need for frequent tool reconditioning while preserving edge geometry and repeatability across batches. Secure mounting and rigid setup for repeatable accuracy A substantial shank Ø 40 mm and an overall length of 251 mm provide the stiffness required for stable clamping and reduced vibration during cutting. The combination of a well-dimensioned shank and a shank length of 68 mm simplifies toolholder selection and improves concentricity, which is crucial when producing tight-tolerance holes. The tool’s mass (approx. 2.276 kg) also contributes to damping, helping to protect cutting edges and maintain dimensional accuracy over longer runs. Practical fit for production workshops and machining centres This insert drill is suitable for industrial settings where larger bore diameters are needed reliably and repeatedly. The tool’s design favours quick set-up changes, predictable maintenance cycles and a straightforward replacement strategy based on WCM-0804 inserts. For procurement and planning departments, the clear compatibility with Korloy inserts and the robust mechanical design support better lead-time forecasting and sustained throughput when integrated into a standardised tooling set-up. For robust large-diameter drilling choose Teknik Cutting Tools’ indexable solution and contact Metav Werkzeuge for personalised machine pairing and supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: U196TM Manufacturer: Teknik Makina Diameter: 46 mm Cutting length: 138 mm Overall length: 251 mm Shank diameter: 40 mm Shank length: 68 mm Weight: 2.276 kg Compatible insert: WCM-0804 Compatible insert maker: Korloy Product type: Indexable drill Brand: Teknik Cutting Tools FAQ What is the nominal diameter and cutting reach of this tool? The indexable drill U196TM has a nominal diameter of 46 mm and a cutting length of 138 mm, providing an extended reach for deep-hole operations. Which inserts are required for the U196TM? This tool is designed for Korloy WCM-0804 inserts; using the specified insert type ensures correct seating and expected cutting performance. Which shank size is required for secure clamping? The U196TM features a shank diameter of 40 mm and a shank length of 68 mm, suitable for rigid toolholder connections common in machining centres. Is the U196TM intended for high-volume production? Yes, the insert-based concept of the U196TM supports rapid insert changes and predictable maintenance, making it appropriate for sustained production runs. How does the tool support dimensional repeatability? A combination of a robust shank, precise insert seating and controlled geometry reduces runout and vibration, contributing to consistent hole quality across batches. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
47mm Solid Drill 141mm Cutting Length 68mm Shank Length 254mm Overall Length - Teknik Makina
Take advantage of the combination of robust clamping, long cutting reach and compatibility with standard Korloy inserts for reliable, repeatable holemaking; order directly via Metav Werkzeuge or ask our consultants for application advice. Indexable drill body U198TM — Ø 47 mm, long cutting reach, Teknik Makina The Indexable drill body U198TM is designed for industrial CNC drilling where insert-based cutting delivers fast material removal and straightforward maintenance *Indexable design for WCM-0804 inserts *Ø 47 mm nominal diameter *141 mm effective cutting length *Robust 40 mm shank for stable clamping High, predictable removal rates with insert-based cutting The U198TM is built for efficient holemaking: its Ø47 mm nominal diameter combined with a 141 mm cutting length offers an extended reach that supports deep-hole operations without frequent retooling. Using replaceable WCM-0804 inserts from Korloy means cutting edges are exchanged rather than reground, which reduces cumulative tool cost and keeps cycle times low. For machining planners this translates into measurable throughput gains and easier inventory management when standard inserts are stocked. Stable clamping for concentric holes and less rework A substantial 40 mm shank provides secure seating in heavy-duty toolholders, improving runout and repeatability during drilling cycles. The tool’s overall proportions — with a 68 mm shank engagement and a 254 mm total length — help maintain concentricity in deep cuts, lowering scrap rates and secondary finishing operations. Where hole tolerance and surface integrity matter, the tool body’s mass and geometry contribute to consistent results across batch runs. Simple upkeep and reduced production interruptions Because the design relies on indexable inserts, maintenance is quick: worn cutting edges are swapped in minutes, restoring cutting performance without lengthy downtime. The system lowers the requirement for resharpening logistics and extends the productive life of the tool body. For workshops aiming to balance uptime and cost control, an insert-based approach offers predictable tool consumption and straightforward spare-part planning. Reliable supply and partner support for production continuity Sourcing through Metav adds a further operational advantage: central European warehousing and procurement processes that streamline reorder cycles and reduce lead times. Metav’s catalogue breadth and quality filtering at the Emmerich location help ensure consistent tool availability, supported by long-term experience supplying industry and trade. This support is particularly useful when integrating the U198TM into a wider tooling strategy or when standardising inserts across multiple machines. For application-specific recommendations on the Teknik Makina indexable drill body U198TM and to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge GmbH in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on inserts, clamping and integration into existing toolholders Technical Data Article number: U198TM Manufacturer: Teknik Makina Data Nominal diameter: 47 mm Total length: 254 mm Cutting length: 141 mm Shank diameter: 40 mm Shank engagement length: 68 mm Weight: 1.919 kg Special features Compatible inserts: WCM-0804 Compatible insert manufacturer: Korloy Indexable insert drill body design FAQ Which inserts fit this drill body? The U198TM accepts WCM-0804 indexable inserts; Korloy inserts specified for that seat size are fully compatible with the Teknik Makina drill body. Can the tool be used in standard 40 mm holders? Yes, the U198TM features a 40 mm shank intended for secure clamping in standard straight-shank toolholders and adaptors. How does insert replacement affect uptime? Replacing indexable inserts on the U198TM restores cutting performance quickly, reducing machine downtime compared with regrinding solid tools. Is the U198TM suitable for deep-hole drilling applications? With a 141 mm cutting length and a total length of 254 mm, the U198TM is designed for extended-reach drilling where deeper holes are required while maintaining stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
48mm Solid Drill 144mm Cutting Length 68mm Shank Length, 258mm Overall Length - Teknik Makina
Take advantage of the combination of robust build and precise insert compatibility to maintain stable, repeatable drilling operations; benefit from the large cutting length for deeper holes and the secure 40 mm shank for reliable clamping. Order the tool via Metav Werkzeuge or consult the Metav team for holder and insert recommendations. U200TM Vollbohrer — Indexable insert drill, Ø 48 mm, 144 mm cutting length (Teknik Makina) U200TM Vollbohrer provides a purpose-built solution for machining centres and toolrooms requiring stable, repeatable holemaking with replaceable Korloy inserts Ø 48 mm cutting diameter Compatible with Korloy WCM-0804 inserts 144 mm effective cutting length 40 mm shank diameter and 68 mm shank length High-performance drilling with measurable stability The tool is configured to deliver a stable drilling platform: the Ø 48 mm diameter together with a substantial overall length of 258 mm increases rigidity for medium- to deep-hole tasks. The 144 mm cutting length gives extended reach without sacrificing control, helping to reduce set-up frequency and minimise cycle-time losses. These dimensions translate into consistent hole quality and less rework in series production, providing a clear efficiency advantage for machining operations that prioritise throughput. Clear compatibility reduces procurement risk Designed for insert-based cutting, the drill accepts Korloy WCM-0804 inserts, enabling quick index changes and reduced tooling downtime. Using replaceable inserts allows separation of body and cutting geometry decisions: operators can keep the robust drill body in service while changing cutting grades to suit material or finish requirements. This approach supports predictable maintenance planning and lowers long-term tooling cost compared with single-piece alternatives. Shank and handling engineered for secure clamping The drill features a 40 mm shank diameter and a 68 mm shank length, values that align with a wide range of standard holders and heavy-duty tool posts. The relatively high mass of 2.486 kg contributes to stability when clamped, while the shank dimensions facilitate straightforward integration into existing toolchains. The combination of secure clamping and balanced mass reduces vibration risk, which in turn extends insert life and maintains hole accuracy over long runs. Practical application: where the design pays off This configuration is aimed at workshops and production lines that require reliable performance for deeper or repetitive drilling tasks. The tool’s geometry and insert compatibility make it suitable for batch production and mixed-series work where changeover speed and predictable machining outcomes matter. The modular nature of insert systems supports quick adaptation to different alloys and finish specifications without replacing the complete drill body. Contact Metav Werkzeuge to verify holder compatibility and secure tailored recommendations for the Teknik Makina U200TM; the Metav team in Emmerich can advise on suitable inserts, holders and delivery options Technical data Article number: U200TM Manufacturer: Teknik Makina Product name: Vollbohrer Facts Diameter: 48 mm Overall length: 258 mm Cutting length: 144 mm Shank diameter: 40 mm Shank length: 68 mm Weight: 2.486 kg Special features Compatible inserts: Korloy WCM-0804 Shank suited to standard 40 mm holders Designed for insert-based drilling FAQ What inserts does the U200TM accept? The U200TM is compatible with Korloy WCM-0804 inserts, allowing rapid index changes and flexible cutting-grade selection. Is the U200TM suitable for deep-hole drilling? With a 144 mm cutting length and 258 mm overall length, the drill is configured for deeper and repetitive holemaking while maintaining stability. Which shank size is required for clamping the drill? The tool uses a 40 mm shank diameter with a 68 mm shank length; these dimensions align with common heavy-duty holders. How does insert use affect maintenance and costs? Using replaceable Korloy inserts on the U200TM reduces downtime for regrinding and lowers long-term tooling expense because the body remains in service while cutting edges are exchanged Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
49mm Solid Drill 147mm Cutting Length, 40mm Shank, 261mm Overall Length - Teknik Makina
Take advantage of the combination of a wide Ø 49 mm cutting diameter, a deep 147 mm cutting length and a robust 40 mm shank for steady, high‑throughput drilling in production environments; order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. Vollbohrer (Indexable Drill) U201TM — Ø 49 mm, 261 mm overall length (Teknik Makina) The Vollbohrer (Indexable Drill) U201TM is an industrial indexable drill designed for deep-hole and heavy-duty drilling operations where insert replacement and stable toolholding reduce downtime and running costs Ø 49 mm drill diameter Compatible with Korloy WCM-0804 inserts 147 mm cutting length for deep holes 40 mm shank with 261 mm overall length Consistent throughput for deep-hole machining With a substantial Ø 49 mm diameter and 147 mm cutting length, this indexable solution provides stable metal removal for prolonged cycles. The tool’s geometry is optimised for axial rigidity, which reduces vibration and improves hole accuracy; this leads to fewer reworks and steadier component quality. Such construction supports uninterrupted production runs and a reliable machining window for finishing and roughing passes. Economical machining through insert compatibility Compatibility with Korloy WCM-0804 inserts converts tool performance into cost efficiency: worn cutting edges are replaced quickly without discarding the body, lowering consumable costs and minimising machine downtime. An indexable design separates cutting geometry from the tool body, enabling tailored insert grades for specific materials and processes while preserving the holder for many cycles — a decisive advantage in batch production and repair workshops. Secure clamping and dynamic balance for superior surface finish A 40 mm shank and 68 mm shank length combine with the tool mass to provide secure clamping and reduced runout. The resulting stable interface between spindle and tool improves concentricity and surface finish in hole walls, which is particularly beneficial when tight geometric tolerances are required. The tool’s mass distribution also assists in vibration damping during deep cuts, extending insert life and stabilising cycle times. Designed for production workshops and jobbing shops This indexable drill is aimed at industrial users who value predictable performance and easy serviceability. The substantial 261 mm overall length offers reach for through and semi‑through holes while retaining the mechanical stability required in production environments. As an engineered component within a wider tooling system, the holder is suited to repeatable manufacturing processes and integrates into standard tool change routines without complex setup. Discuss application requirements with Metav Werkzeuge to determine whether Teknik Cutting Tools’ U201TM indexable drill best fits the intended machining task and to arrange reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U201TM Name: Vollbohrer Manufacturer: Teknik Makina SKU: U201TM Numeric specifications Diameter: 49 mm Overall length: 261 mm Cutting length: 147 mm Shank diameter: 40 mm Shank length: 68 mm Weight: 5.562 kg Features and compatibility Compatible inserts: WCM- 0804 Compatible insert manufacturer: Korloy Product type: Indexable drill FAQ What hole diameter does this tool produce? The tool produces holes with a nominal diameter of 49 mm, as specified for the U201TM indexable drill. Which inserts are compatible with the holder? The holder accepts Korloy WCM-0804 indexable inserts, enabling fast replacement and flexible grade selection. How deep can this drill cut in a single pass? The effective cutting length is 147 mm; the overall length of the tool is 261 mm, providing reach for deep-hole operations. What shank dimensions ensure secure clamping? The tool features a 40 mm shank diameter with a 68 mm shank length, designed for robust clamping and reduced runout. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Solid Drill 150mm Cutting Length 265mm Overall Length, 40mm Shank - Teknik Makina
Take advantage of a stable, productivity-focused solution with a 50 mm diameter and 150 mm cutting length for consistent holemaking and reduced tool change time; benefit from a 40 mm shank for secure clamping. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Teknik Makina Indexable Drill U202TM – 50 mm, 150 mm cutting length A compact, industrial indexable drill U202TM designed for precision holemaking in machining centres and drilling setups, equipped for replaceable Korloy WCM-0804 inserts 50 mm diameter for standard bore operations 150 mm effective cutting length for deeper holes 40 mm shank for secure clamping Compatible with Korloy WCM-0804 inserts Increased throughput through stable drilling geometry The U202TM is engineered to deliver repeatable hole quality by combining a 50 mm cutting diameter with a long 150 mm cutting length, which reduces the need for multiple tool changes on longer bores. The 40 mm shank ensures secure holding in standard toolholders and minimises micro-movements during cutting, contributing to tighter tolerances and fewer reworks. Emphasis on rigidity translates into improved cycle times and consistent surface finish, making the tool a rational choice where productivity and dimensional reliability are priorities. Cost-efficient insert system for predictable tool life Using the proven WCM-0804 insert format from Korloy allows quick index changes and straightforward stock management. The insert-based design separates cutting geometry from the tool body, so worn edges are replaced instead of the entire tool, lowering running costs and inventory value over time. This configuration supports a predictable maintenance rhythm and faster on-machine recovery; the result is reduced downtime and a measurable improvement in cost per hole for batch and single-part production. Practical handling and shopfloor integration With an overall length of 265 mm and a tool weight of 2.725 kg, the drill balances reach and handling for common machining cells. A tool connection length of 68 mm provides sufficient engagement for standard holders while limiting overhang to control vibration. These physical attributes simplify tool presetting and mounting workflows, helping maintain spindle life and reduce set-up time. For operations requiring dependable drilling at pace, the design facilitates straightforward integration and stable process windows. Contact Metav Werkzeuge for tailored toolholder suggestions and matching inserts to ensure the U202TM performs optimally in the intended machine and material setup — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: U202TM Manufacturer: Teknik Makina Product name: Indexable drill (Vollbohrer) SKU: U202TM Core dimensions Diameter: 50 mm Overall length: 265 mm Cutting length: 150 mm Shank diameter: 40 mm Shank connection length: 68 mm Weight: 2.725 kg Compatibility & features Compatible inserts: WCM-0804 Compatible insert manufacturer: Korloy Suitable for use in machining centres and drilling machines Indexable insert system for reduced tooling costs FAQ What insert type does this drill use? The drill is designed for WCM-0804 inserts; the Korloy-compatible format enables fast index changes and economical running costs for the U202TM indexable drill. Which machines suit this tool? Its 40 mm shank and 68 mm connection length make the tool suitable for standard drilling spindles and toolholders commonly found on machining centres and dedicated drilling machines. How does the tool contribute to production efficiency? By combining a 150 mm cutting length with an insert system, the tool reduces tool changes and downtime, improving parts-per-shift throughput and lowering the cost per hole. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
51mm Solid Drill 153mm Cutting Length 68mm Shank Length, 40mm Shank Dia - Teknik Makina
Take advantage of the combination of robust insert compatibility, a generous cutting length and a stable shank for dependable holemaking in production runs. Order the Indexable drill U203TM through Metav Werkzeuge or contact our advisers for application-specific guidance. Indexable drill U203TM – Ø 51 mm, 153 mm cutting length (Teknik Makina) The Indexable drill U203TM is a precision insert drill designed for demanding CNC holemaking where repeatability and rapid insert changes are required Diameter 51 mm for deep holes 153 mm cutting length for long bores 40 mm shank for stable clamping Compatible with Korloy WCM-0804 inserts Designed for uninterrupted production with insert-based economy The robust design of this indexable drill targets machine shops and production lines that require consistent throughput without frequent tool regrinds. With a 51 mm diameter and a 153 mm cutting length, the tool reduces the number of refits needed for longer bores, while the substantial 40 mm shank ensures secure clamping and lower vibration. Using an insert system means cutting edges are replaced quickly rather than the entire tool being renewed, which translates into less downtime and a lower cost per hole over high volumes. Precision that supports faster cycle times on CNC equipment Built to integrate with standard machining spindles, the U203TM’s overall length of 268 mm offers reach for deeper operations while keeping rigidity. Compatibility with Korloy WCM-0804 inserts provides a clear maintenance path: worn cutting edges are swapped in seconds, preserving bore quality and surface finish. For shops unfamiliar with insert terminology, an insert is a replaceable carbide cutting piece; using them lets operators maintain stable cutting geometry and consistent part tolerances without specialist grinding skills. Ready for workshop logistics and consistent supply Marked under SKU U203TM, this tool comes as a single, ready-to-fit item with a mass of 2.537 kg, simplifying handling, storage and inventory rotation. The insert-based approach reduces the variety of full tools required in a storeroom since one body can serve many edge changes. Bought via Metav Werkzeuge, customers also benefit from centralised procurement and steady stock levels from Emmerich, which supports reliable delivery into European workshops and minimises supply disruption. For a precise assessment of how the U203TM will perform in specific machining scenarios, contact Metav Werkzeuge for tailored advice and to discuss compatible inserts and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: U203TM Manufacturer: Teknik Makina Diameter: 51 mm Overall length: 268 mm Cutting length: 153 mm Shank diameter: 40 mm Shank length: 68 mm Weight: 2.537 kg Suitable insert: WCM-0804 Compatible insert manufacturer: Korloy Facts Ø 51 mm Overall length 268 mm Cutting length 153 mm Shank length 68 mm Shank Ø 40 mm Weight 2.537 kg Special features Compatible with Korloy WCM-0804 inserts SKU U203TM Manufacturer Teknik Makina FAQ Which inserts fit this drill best? The U203TM indexable drill is designed for Korloy WCM-0804 inserts; using the specified insert type maintains intended cutting geometry and tool balance. Can the U203TM be used on standard milling spindles? Yes. The tool’s 40 mm shank and 268 mm overall length allow mounting in typical CNC spindles and drilling heads that accept that shank diameter. How does insert replacement affect uptime? Replacing worn inserts on the U203TM is quick and eliminates the need for regrinding the whole tool body, which reduces machine downtime and keeps production moving. Is the drill suitable for long-reach holes? With a 153 mm cutting length and 268 mm overall length, the U203TM supports deeper bores while preserving rigidity for accurate holemaking. What is the SKU for ordering spare parts or replacements? Order or reference the tool using SKU U203TM when requesting the drill body or compatible insert sets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Schnellere Fertigung durch präzise Vollbohrer für industrielle Bearbeitungen
Vollbohrer, auch bekannt als Massivbohrer oder Durchgangsbohrer, sind speziell entwickelte Zerspanungswerkzeuge zum direkten Einbringen von Bohrungen in massives Werkstückmaterial. Sie werden bevorzugt auf Drehmaschinen und Bearbeitungszentren eingesetzt, um in einem einzigen Arbeitsgang große Materialvolumina wirtschaftlich abzutragen.
Effiziente Funktion und technischer Kontext für robuste Anwendungen
In der Praxis ermöglichen Vollbohrer das Bohren ohne vorheriges Zentrieren oder Vorbohren, wodurch Rüstzeiten reduziert werden. Bei Varianten ohne Innenkühlung wird der Kühlschmierstoff über externe Maschinendüsen zugeführt; diese Auslegung ist jedoch nur bei extrem kurzen Bohrtiefen und sehr leicht zerspanbaren Materialien geeignet, da produzierte Späne den Bohrkanal schnell verschließen können. Industrieller Standard sind Vollbohrer mit Innenkühlung: durch den Werkzeugkörper verlaufende Kanäle transportieren das Kühlmittel unter hohem Druck direkt an die Schneiden der Bohrerspitze. Dadurch werden Reibungswärme abgeführt und Spänemengen zuverlässig aus dem Bohrloch gespült, was ein Festklemmen, Riefenbildung und plötzliche Werkzeugbrüche effektiv verhindert.
Optimierte Produktion: Konkrete Vorteile für die Fertigung
- Reduzierte Rüstzeit durch Bohren in einem Arbeitsgang mit Vollbohrer oder Einstufenbohrer.
- Verbesserte Spanabfuhr dank innenliegender Kühlmittelkanäle, die die Standzeit verlängern.
- Minimiertes Bruchrisiko durch gezielte Kühlung und Druckspülung an der Bohrerspitze.
- Höhere Prozesssicherheit bei der Bearbeitung großer Materialvolumina auf Bearbeitungszentren.
- Anpassbar an Maschinentyp: Vollbohrer und Durchgangsbohrer sind für Drehmaschinen und Fräszentren verfügbar.
Metav als starker Partner für Beschaffung und Beratung
Metav fungiert als Qualitätsfilter und bietet mit Sitz in Emmerich ein lückenloses Sortiment für präzise Werkzeuge. Mit über 48.000 Kunden und mehr als 250.000 Produkten reduziert Metav die Lieferantenanzahl und liefert verlässlich an die Werkbank. Das Sortiment umfasst sorgfältig ausgewählte Vollbohrer, Massivbohrer und Durchgangsbohrer sowie Beratung zur richtigen Auslegung von Innenkühlung und Schneidengeometrie.
Kurz und prägnant: Wann Vollbohrer die beste Wahl sind
Für Anwendungen, in denen Bohren in einem Durchgang, sichere Spanabfuhr und maximale Prozesssicherheit gefordert sind, sind Vollbohrer die bevorzugte Lösung. Vollbohrer sowie die Varianten Massivbohrer und Durchgangsbohrer sorgen für effiziente, zuverlässige Bohrprozesse in der Serien- und Einzelfertigung.
FAQ
Was ist der Unterschied zwischen Vollbohrer mit Innenkühlung und ohne Innenkühlung?
Vollbohrer mit Innenkühlung führen das Kühlmittel durch Kanäle im Werkzeugkörper direkt an die Schneide und ermöglichen so effektive Wärmeabfuhr und Spantransport; Varianten ohne Innenkühlung werden von außen über Maschinendüsen gekühlt und eignen sich nur für sehr kurze Bohrtiefen und weiche Materialien.
Warum reduziert die Innenkühlung das Risiko von Werkzeugbruch bei Vollbohrern?
Die Innenkühlung führt das Kühlmittel unter hohem Druck an die Bohrerspitze, wodurch Reibungswärme reduziert und Späne aus dem Bohrloch gespült werden; dadurch werden Festklemmen und riefenbildung vermieden, was Werkzeugbrüche verhindert.
Auf welchen Maschinentypen werden Vollbohrer typischerweise eingesetzt?
Vollbohrer und ihre Synonyme Massivbohrer sowie Durchgangsbohrer werden hauptsächlich auf Drehmaschinen und Bearbeitungszentren eingesetzt, dort ermöglichen sie das wirtschaftliche Abtragen großer Materialmengen in einem Arbeitsgang.
Wie unterstützt Metav bei der Auswahl des passenden Vollbohrers?
Metav bietet ein umfangreiches Sortiment und fachkundige Beratung aus Emmerich; Kunden profitieren von Produktauswahl, technischen Informationen zur Innenkühlung und Empfehlungen für die passende Schneidengeometrie.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com