Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT060204-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the RM4 chipbreaker and a 0.4 mm corner radius delivers wear resistance and secure chip control for stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for process optimisation. CCMT060204-RM4 WSM10S indexable insert (Rhombic 80°, 7° clearance) – Walter Tools CCMT060204-RM4 WSM10S is a coated carbide indexable insert designed for demanding machining of stainless steel and heat‑resistant superalloys in turning and drilling‑bore applications Tiger·tec Silver coated grade WSM10S RM4 chipbreaker for reliable chip control Rhombic 80° form with 0.4 mm corner radius 7° clearance angle for robust edge stability High‑performance grade for difficult materials The insert is based on the Tiger·tec Silver coating technology and the WSM10S grade, a coated carbide solution engineered for elevated thermal and mechanical loads. For applications involving stainless steel or heat‑resistant superalloys, the combination of coating and substrate improves heat resistance and reduces edge wear. This results in extended tool life and fewer index changes, supporting consistent cycle times and predictable production output. Stable chip control and surface quality Equipped with the RM4 chipbreaker, the geometry promotes controlled chip formation even when machining tough materials. Predictable chip form reduces interruptions and prevents rework, while the Rhombic 80° shape contributes to process flexibility. The insert’s geometry helps maintain a good surface finish during both longitudinal and light profiling cuts, enabling stable productivity with fewer secondary operations. Design features that increase process security The 0.4 mm corner radius and a 7° clearance angle provide a balance between edge strength and cutting performance. A robust edge supports interrupted cuts and variable depths of cut, while the modest corner radius aids in avoiding premature edge chipping. These design choices translate directly into fewer scrap pieces and enhanced repeatability across batches, important for industrial and contract machining environments. Application guidance and suitability This insert is intended for machining stainless steel and materials classified under ISO group S (heat‑resistant superalloys and titanium), as indicated by the grade characteristics. The geometry and coating suit operations where thermal stability and secure chip control are priorities. If process parameters or mounting details require fine tuning, the supplier can advise on feed and speed ranges to align the cutting data with machine capability and workpiece specification. For technical assistance: info@metav-werkzeuge.com or +49 2822 7131930. Contact Metav Werkzeuge today for tailored application advice on Walter Tools CCMT060204-RM4 WSM10S inserts and to arrange supply for specific production needs Technical data Article number: CCMT060204-RM4-WSM10S-WALTER Designation: CCMT060204-RM4 WSM10S Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.4 mm Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM10S (coated carbide) Chipbreaker: RM4 Plate form: Rhombus 80° Execution: T Material suitability: S / M (superalloys / stainless steel) ISO designation: CCMT060204-RM4 WSM10S FAQ What materials is this insert suitable for? The CCMT060204-RM4 WSM10S insert is formulated for machining stainless steel and heat‑resistant superalloys (ISO group S), with the WSM10S grade providing heat resistance and edge stability. How does the RM4 chipbreaker affect performance? The RM4 chipbreaker promotes consistent chip formation, reducing interruptions and improving process reliability when using the Walter Tools indexable insert. Can the insert be used for both turning and bore‑related operations? Yes, the geometry and Rhombic 80° form make the insert versatile for a range of turning tasks and certain drill/ream holder applications where this insert form is specified. What is the benefit of the 0.4 mm corner radius? A 0.4 mm corner radius increases edge strength for interrupted cuts and supports stable tool life without compromising surface quality for light to moderate finishing passes. Where to get application data for feeds and speeds? Feeding and speed recommendations for the CCMT060204‑RM4 WSM10S are available from Metav Werkzeuge; for initial guidance, refer to Walter Tools cutting data for the Tiger·tec Silver series. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the trademark holders. The offered item is original, brand‑new merchandise of the manufacturer Walter Tools.
CCMT060204-RM4 WSM20S RM4 Wendeplatten - Walter Tools
The CCMT060204-RM4 WSM20S insert combines Walter Tools' Tiger·tec Silver coating and an RM4 chipbreaker to deliver stable cutting edges and reliable chip control when machining demanding alloys; the rhombic 80° geometry with a 7° relief and 0.4 mm corner radius supports versatile turning and drilling tasks. Order the CCMT060204-RM4 WSM20S directly via Metav Werkzeuge or ask our consultants if needed. CCMT060204-RM4 WSM20S — Indexable insert for turning and drilling, Walter Tools, Tiger·tec Silver, RM4 CCMT060204-RM4 WSM20S is an indexable cutting insert designed for demanding turning and drilling operations, optimised for rostfreier Stahl and heat-resistant superalloys. Tiger·tec Silver coating for thermal stability Optimised RM4 chipbreaker for secure chip control Rhombic 80° geometry for versatile turning and drilling Suitable for rostfreier Stahl and superalloys High-temperature stability that improves edge life The combination of Tiger·tec Silver technology and the WSM20S grade gives this insert a coating system engineered for heat resistance and edge robustness. For components made from rostfreier Stahl or high-temperature alloys, thermal loads and built-up edge are common challenges; the coating reduces friction and increases heat resistance, which helps to extend tool life and maintain a consistent cutting edge. This results in fewer indexings and more predictable machining cycles, supporting higher process reliability and reduced unplanned downtime. Geometry and chip control that enhance productivity The rhombic 80° form, paired with a 7° relief and a 0.4 mm corner radius, creates a balance between cutting stability and accessibility for interrupted or radial cuts. The RM4 chipbreaker is tailored to reliable chip formation in tougher materials, promoting continuous and controllable chips during both turning and boring operations. These geometrical features support secure tool behaviour under load, which translates into improved surface quality and fewer machine interruptions for chip-related issues. Practical advantages for production workflows Tolerance class M and the ISO designation CCMT060204-RM4 WSM20S identify the insert as suitable for medium-tolerance applications in workshops and production lines. The insert’s construction and Tiger·tec Silver coating help to deliver repeatable performance across batches, which is beneficial for setups that require consistent part quality and reduced post-process inspection. Where process stability and cost-efficiency matter, this insert supports longer tool life and more consistent component tolerances, contributing to lower overall machining costs over time. Application guidance and material overview This insert is intended primarily for rostfreier Stahl (ISO group M) and heat-resistant superalloys or titanium alloys (ISO group S), as indicated by the WSM20S designation. For less experienced users: ISO group M denotes materials prone to work hardening and high thermal loads; ISO group S covers alloys that are poor thermal conductors and place high demands on edge retention. Selecting the CCMT060204-RM4 WSM20S for these materials leverages its heat-resistant coating and chip control geometry to help avoid common problems such as built-up edge or rapid flank wear. For an expert selection based on component material and machine parameters, contact Metav Werkzeuge to discuss the CCMT060204-RM4 WSM20S insert and application-specific recommendations by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: CCMT060204-RM4-WSM20S-WALTER Designation: CCMT060204-RM4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Product type: Indexable insert for turning and drilling Core specifications Size: 06 Thickness: 02 Corner radius: 0.4 mm Relief angle: 7° Insert form: Rhombic 80° Chipbreaker: RM4 Tolerance class: M Material compatibility & features Suitable for rostfreier Stahl (ISO group M) Suitable for heat-resistant superalloys/titanium (ISO group S) Coating technology: Tiger·tec Silver Application areas: turning, drilling/reaming (indexable insert) Execution: T FAQ What materials is this insert best suited for? The CCMT060204-RM4 WSM20S insert is designed for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), making it suitable where thermal stability and edge retention are required. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on this Walter Tools insert promotes controlled chip formation for continuous machining, helping to reduce chip-related interruptions and improve surface finish. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver increases thermal resistance and reduces friction at the cutting edge, which helps to prolong edge life and deliver consistent performance when machining demanding materials. Is the rhombic 80° geometry suitable for boring and turning? Yes, the rhombic 80° form with a 7° relief offers good access for both turning and drilling/reaming operations, combining strength at the cutting edge with the versatility needed for radial and axial cuts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for description and identification only; there is no affiliation between our company and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
CCMT060204-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of a combination of Tiger·tec Silver coating and the WSM30S grade for secure chip formation and extended tool life when machining stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT060204-RM4 WSM30S — Drill/boring and turning indexable insert, Tiger·tec Silver, RM4 chipbreaker (Walter Tools) The CCMT060204-RM4 WSM30S is a coated carbide indexable insert engineered for demanding machining of stainless steels and heat‑resistant alloys in drilling, boring and turning applications. Tiger·tec Silver coated carbide grade WSM30S Optimised RM4 chipbreaker for stable chip control Rhombic 80° insert with 0.4 mm corner radius 7° clearance angle for secure cutting geometry High‑performance grade for demanding materials The Tiger·tec Silver WSM30S grade combines a wear‑resistant coating with a substrate tailored for high temperatures and abrasive conditions. This results in stable cutting edges when machining austenitic stainless steels and nickel‑based superalloys, where chip adhesion and heat concentration typically limit productivity. By choosing a grade designed specifically for these materials, operators benefit from longer tool life and fewer unplanned index changes, which increases process reliability and reduces machining interruptions. Geometry and chip control that maintain productivity The RM4 chipbreaker and rhombic 80° geometry are engineered to produce predictable, segmental chips under heavy cutting loads. The 0.4 mm corner radius improves edge strength for interrupted cuts, while the 7° clearance angle optimises shear conditions and reduces rubbing on the flank. Together these features support consistent surface finish and minimise rework, meaning fewer stoppages and a smoother workflow across batch production or complex components. Practical advantages for workshop integration As a multifunctional insert suitable for both drilling/boring and turning toolholders, the part reduces inventory complexity and simplifies tool planning. The compact 06 size and 02 thickness make it compatible with a wide range of standard insert seats, and the coated carbide construction delivers predictable performance at elevated cutting speeds. For planners and production engineers, this translates into measurable efficiency gains and easier setup across mixed‑material production runs. Material suitability and recommended use cases The grade is explicitly targeted at ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium). In practice this means the insert is well suited to components where heat generation and material ductility challenge conventional grades. Typical applications include aerospace or energy sector parts, shafts, and flanges made from austenitic steels or nickel alloys. When used with appropriate coolant strategies and cutting parameters, the combination of coating and geometry supports secure chip formation and repeatable machining results. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to discuss cutting parameters for specific stainless or superalloy applications Technical Data Article number: CCMT060204-RM4-WSM30S-WALTER Designation: CCMT060204-RM4 WSM30S Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Key figures Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Rhombic 80° Insert size: 06 Thickness: 02 Materials & special features Series/coating: Tiger·tec Silver Grade: WSM30S Chipbreaker: RM4 Material suitability: stainless steels (M) Material suitability: superalloys and titanium (S) FAQ Which materials is this insert best suited for? The CCMT060204-RM4 WSM30S is specified for ISO groups M and S, making it suitable for stainless steels and heat‑resistant superalloys/titanium due to its Tiger·tec Silver coating and heat‑resistant substrate. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip segmentation and evacuation; this stabilises the cutting process and helps to maintain surface finish during heavy cuts with the CCMT060204-RM4 WSM30S insert. Can this insert be used in both drilling and turning toolholders? Yes, the insert is designed for drill/ream and turning applications where the rhombic 80° shape and insert dimensions are compatible with many standard toolholder designs. What benefits does the 0.4 mm corner radius provide? The 0.4 mm corner radius increases edge strength for interrupted cuts and improves resistance to chipping, enhancing the robustness of the CCMT060204-RM4 WSM30S in demanding machining conditions. Is the Tiger·tec Silver series suitable for high cutting speeds? Tiger·tec Silver provides a balance of thermal stability and wear resistance that supports elevated cutting speeds in stainless steels and certain superalloys when paired with appropriate feeds and coolant strategies. Trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original new goods from the manufacturer. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
CCMT060204-RP4 WPP10G T Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating and the wear-resistant WPP10G grade for stable chip formation and sustained cutting performance; benefit from the RP4 chipbreaker and rhombic 80° geometry for reliable steel machining. Order directly via Metav Werkzeuge or consult the team for application support. CCMT060204-RP4 WPP10G – Indexable insert for turning and drilling, Walter Tools The CCMT060204-RP4 WPP10G is an indexable insert designed for productive turning and boring of steel, combining a coated carbide grade with a dedicated chipbreaker and compact rhombic geometry for general steel applications. Tiger·tec Gold coated WPP10G Optimised RP4 chipbreaker for steel Rhombic 80° geometry, 0.4 mm corner radius 7° relief angle for stable cutting High wear resistance that extends tool life The Tiger·tec Gold coating applied to this coated carbide grade increases resistance to abrasive and adhesive wear during continuous production. As the grade WPP10G is formulated for steel machining (ISO P), the result is fewer tool changes and more consistent part quality. For production environments this means reduced process interruptions and improved overall equipment effectiveness, while the coating also helps maintain edge integrity under higher cutting temperatures. Controlled chip formation for safer, faster machining The integrated RP4 chipbreaker promotes predictable chip control when machining typical steel alloys. Better chip control reduces risk to the workpiece and machine, enabling higher feed rates and reduced cycle times without sacrificing surface finish. The increased process reliability leads to lower secondary operations for chip evacuation and easier automation of turning and boring tasks, translating into clearer productivity gains on mixed-series production runs. Geometry engineered for dimensional accuracy and versatility With a Rhombic 80° form and a 0.4 mm corner radius, the insert balances strength and accessibility for shoulder work and light finishing passes. The 7° relief angle provides robust edge support while allowing effective engagement in bore or external turning operations. Together these geometry elements ensure repeatable dimensional results and flexible application across roughing and semi-finishing steps on a wide range of steels. For application advice or to secure Walter Tools' CCMT060204-RP4 WPP10G, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT060204-RP4-WPP10G-WALTER Manufacturer: Walter Tools Identification: CCMT060204-RP4 WPP10G Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Dimensions & tolerances Insert size: 06 Thickness: 02 Corner radius: 0.4 mm Relief angle: 7° Tolerance class: M Coating, grade & applications Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: RP4 Suitable for: steel (ISO P) FAQ What materials is this insert suited for? The CCMT060204-RP4 WPP10G is specified for machining steel according to ISO P and is optimised for typical heat and chip behaviour encountered when cutting unalloyed and alloyed steels. How does the RP4 chipbreaker influence productivity? The RP4 chipbreaker on this Walter Tools insert improves chip control and evacuation, enabling higher feed rates and more efficient metal removal with reduced risk of chip-related interruptions. Is the coating beneficial for high-temperature cutting conditions? Yes, the Tiger·tec Gold coating on the CCMT060204-RP4 WPP10G increases thermal and abrasive resistance, helping to preserve cutting edge life under elevated temperatures common in steel turning. Can the insert be used for both roughing and finishing? The rhombic 80° shape with a 0.4 mm corner radius provides a balance of strength and accessibility, making the insert suitable for a range of operations from roughing to light finishing on steel components. What geometry features support accurate workpiece tolerances? The combination of the 80° rhombic geometry and a 7° relief angle ensures stable cutting engagement and repeatable dimensional accuracy during both external turning and boring operations. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060204-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coated carbide and the RP4 chipbreaker ensures reliable chip control and extended tool life in steel machining; this makes the insert a cost‑effective choice for stable production. Order the CCMT060204-RP4 WPP20G through Metav Werkzeuge or consult their specialists for process‑optimised selection. CCMT060204-RP4 WPP20G drilling/boring and turning indexable insert, Tiger‑tec Gold — Walter Tools The CCMT060204-RP4 WPP20G is an indexable insert engineered for drilling, boring and turning in steel, featuring a rhombic 80° geometry and Tiger‑tec Gold coated carbide for durable cutting performance. Tiger‑tec Gold coated carbide Optimised RP4 chipbreaker 7° relief angle for reliable cutting Rhombus 80° geometry, 0.4 mm corner radius High process reliability and wear resistance for steel production The use of Tiger‑tec Gold coated carbide provides a balanced combination of wear resistance and toughness tailored for machining steel (ISO group P). The coating improves thermal stability at elevated cutting temperatures and reduces flank wear, which translates into longer tool life and fewer insert changes during a shift. Stable edge retention and consistent performance are especially valuable in medium‑volume production where tool‑change downtime directly affects throughput. The insert’s optimised grade WPP20G is designed to handle typical heat and chip formation encountered when turning or boring unalloyed and alloyed steels. Geometry and chip control that improve surface finish and safety The Rhombus 80° geometry together with the RP4 chipbreaker delivers controlled chip formation and predictable cutting behaviour. The modest 0.4 mm corner radius helps to balance edge strength and surface finish, while the 7° relief angle reduces rubbing at the flank, lowering cutting forces and heat build‑up. Explaining the terms: a relief angle prevents the insert body from contacting the workpiece behind the cutting edge, and the chipbreaker shape actively shapes and breaks chips to avoid long, stringy swarf. These features support a repeatable surface quality and reduce the risk of tool‑ or workpiece damage. Versatile application and easy integration in standard toolholders Classified under tolerance class M and supplied in size code 06, this insert fits conventional CCMT pockets and is suitable for a wide range of turning and light boring operations. The coated carbide substrate ensures robustness during interrupted cuts and finishing passes alike. For workshops seeking predictable cycle times, the grade’s balanced properties offer the advantage of fewer insert variants across mixed steel part families, simplifying inventory and tool management. Compatibility with standard clamping systems allows rapid insertion and indexing without special adapters. Contact Metav Werkzeuge for tailored recommendations on integrating Walter Tools Tiger‑tec Gold inserts into existing workflows — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for technical advice and supply. Technical Data Article number: CCMT060204-RP4-WPP20G-WALTER Designation: CCMT060204-RP4 Product type: drilling/boring and turning indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Core data Relief angle: 7° Corner radius: 0.4 mm Shape: Rhombus 80° Size code: 06 Plate thickness code: 02 Tolerance class: M Special features RP4 chipbreaker Coated carbide grade WPP20G Suitable for steel (ISO group P) Stable chip formation and good edge life Designed for drilling, boring and turning applications FAQ What materials is this insert intended for? The CCMT060204-RP4 WPP20G is intended primarily for steel (ISO group P); the WPP20G grade is formulated for the thermal and chip‑formation characteristics of unalloyed and alloyed steels. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating enhances thermal stability and wear resistance on the cutting edge, which helps to extend the service life of the insert and maintain consistent cutting performance. What is the effect of the RP4 chipbreaker? The RP4 chipbreaker is shaped to control chip flow and breakage, reducing the likelihood of long, continuous chips and improving machining safety and surface finish. Which toolholders accept this insert size and form? The rhombic 80° form and size code 06 correspond to standard CCMT pockets in many turning and boring toolholders; verify pocket compatibility with the machine’s toolholder specifications. How does the 0.4 mm corner radius influence results? A 0.4 mm corner radius offers a compromise between edge strength and achievable surface finish, making the insert suitable for both semi‑finishing and finishing passes depending on cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation or partnership implied between Metav Werkzeuge and the manufacturers named. The offered article is an original, brand‑new product from the respective manufacturer.
CCMT060204-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with the RP4 chipbreaker, the insert offers high wear resistance and stable chip control for demanding steel turning; the 0.4 mm nose radius supports consistent surface finish and repeatable dimensional accuracy. Order the insert directly via Metav Werkzeuge or ask the consultants for process-specific recommendations. CCMT060204-RP4 WPP30G — Turning insert CCMT060204-RP4 WPP30G for steel machining | Walter Tools The CCMT060204-RP4 WPP30G is a rhombic 80° turning insert designed for efficient steel machining, combining a Tiger‑tec Gold coated grade with an RP4 chipbreaker for reliable material removal and improved tool life. Tiger‑tec Gold coating for improved wear resistance RP4 chipbreaker for consistent chip control Rhombic 80° geometry with 0.4 mm nose radius Designed for steel machining according to ISO 513 Durable coating for longer tool life and process stability The combination of a Tiger‑tec Gold coating and the WPP30G grade provides enhanced resistance to flank and crater wear during steel turning. This coating technology reduces adhesive wear and thermal damage at the cutting edge, which translates into longer tool life and fewer insert changes in batch production. The result is a measurable increase in uptime and a more predictable machining process, which supports efficient shopfloor planning and cost-effective production. Explanations of coating behaviour are included so operators with limited coating knowledge can appreciate how surface treatments affect heat dissipation and wear mechanisms. Reliable chip control and consistent surface quality The RP4 chipbreaker geometry is engineered to form and evacuate chips reliably when machining steels, reducing the risk of built-up edge and unstable cutting conditions. The 0.4 mm nose radius balances strength and surface finish: it provides edge robustness for interrupted cuts while enabling fine finishing passes where dimensional tolerances matter. This leads to consistent surface quality and reduced rework in serial production. The clearances and geometry also contribute to stable cutting forces, which supports machine tool longevity and process repeatability. Application scope and process advantages for steel components Optimised for the machining group P (steel) in accordance with ISO 513, the insert suits a broad range of turning tasks from roughing to finishing when paired with appropriate cutting data. The rhombic 80° shape offers flexibility for diverse toolholders and approach angles, and the designated tolerance class M ensures reproducible insert seating and repeatable part accuracy. In production environments where material mix is limited to steels, this grade offers a pragmatic balance between wear resistance and toughness, making it a reliable choice for volume machining and mixed-operation turning. Contact Metav Werkzeuge for tailored cutting data, availability and to discuss how Walter Tools CCMT060204-RP4 WPP30G inserts can be integrated into existing turning processes. Technical Data Article number: CCMT060204-RP4-WPP30G-WALTER Designation: CCMT060204-RP4 WPP30G Manufacturer: Walter Tools Data Geometry: Rhombus 80° Nose radius: 0.4 mm Clearance angle: 7° Plate size: 06 Thickness: 02 Tolerance class: M Special features Coating: Tiger‑tec Gold Grade: WPP30G Chipbreaker: RP4 Material application: Steel (ISO P) Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The CCMT060204-RP4 WPP30G insert is designed primarily for steel machining (ISO group P) and the WPP30G grade is optimised for common and alloyed steels. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the WPP30G grade improves wear resistance and reduces adhesion, enhancing tool life and process stability during turning with the CCMT060204-RP4 insert. Which chip control can be expected with the RP4 breaker? The RP4 chipbreaker is engineered for consistent chip formation and evacuation in steel turning, lowering the likelihood of built‑up edge and improving surface finish. Is the 0.4 mm nose radius suitable for finishing passes? Yes, the 0.4 mm radius offers a compromise between edge strength and surface finish, allowing both reliable roughing and fine finishing when appropriate cutting data are used. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. The mention of brand names and trademarks is for explanatory purposes only and does not imply any affiliation between our company and the named brands. The article offered is original, factory‑new merchandise of the respective manufacturer.
CCMT060208 WSM20S MM4 Wendeplatten - Walter Tools
Combining the WSM20S grade with the MM4 chipbreaker and a Rhombic 80° geometry delivers robust performance when machining stainless steel and heat‑resistant alloys; order details and application advice are available via Metav Werkzeuge for seamless integration into production. CCMT060208-MM4 WSM20S – Rhombic 80° turning insert, Tiger‑tec Silver (Walter Tools) A high‑performance CCMT060208-MM4 WSM20S indexable turning insert optimised for demanding stainless steel and superalloy applications, delivering stable edges and controlled chip formation. Tiger‑tec Silver coating for heat stability Stable chip control with MM4 chipbreaker Rhombic 80° geometry for versatile turning 0.8 mm corner radius for dependable edge life Longer tool life when machining stainless steel The coated carbide grade WSM20S from the Tiger‑tec Silver family is designed to cope with the specific challenges of stainless steel. The combination of a thermally resistant coating and a robust substrate reduces heat‑related wear and supports stable cutting edges, which translates into longer tool life and fewer interruptions for insert changes. For shops processing corrosion‑resistant alloys, this means less inventory turnover and improved process reliability without sacrificing surface quality. Precise chip control reduces downtime The integrated MM4 chipbreaker promotes predictable chip formation and evacuation, reducing the risk of entanglement and workpiece damage. Controlled chips ease swarf handling and lower machine cleaning intervals, which in turn improves effective machining time. The positive effect on surface finish and tool behaviour is particularly noticeable in interrupted cuts and deep turning operations, where consistent chip geometry helps maintain cycle stability. Geometry that balances strength and accessibility The Rhombic 80° shape with a 7° clearance angle delivers a good compromise between cutting edge strength and accessibility for external and internal turning. The 0.8 mm corner radius supports durable cutting edges for medium‑to‑heavy cuts while still allowing acceptable surface integrity for finishing passes. This geometry is flexible across a range of turning tasks and supports close tolerances in series production, particularly where tool life and repeatability are priorities. Application guidance and process benefits This insert is suitable for machining materials classified under ISO groups M (stainless steel) and S (heat‑resistant superalloys and titanium), where heat resistance and edge stability are essential. The coated carbide construction aids thermal management and wear resistance during sustained cutting, helping to achieve consistent results in both roughing and semi‑finishing operations. When paired with appropriate insert seatings and stable toolholding, users can expect a measurable improvement in process security and repeatability. Request tailored cutting data and availability from Metav Werkzeuge to match the Tiger‑tec Silver WSM20S grade to specific stainless steel applications; Metav Werkzeuge can advise on recommended feeds, speeds and inventory options Technical data Article number: CCMT060208-MM4-WSM20S-WALTER Designation: CCMT060208-MM4 WSM20S Short designation: CCMT060208-MM4 Product type: Turning and boring indexable insert Series: Tiger‑tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 06 Plate thickness code: 02 Chipbreaker: MM4 Tolerance class: M Special features Coated carbide grade (Tiger‑tec Silver) MM4 chipbreaker for controlled chips Rhombic 80° insert form Suitable for stainless steel (ISO group M) Applicable to heat‑resistant superalloys and titanium (ISO group S) Designed for turning and boring operations Robust edge for interrupted cuts and high thermal loads FAQ Which materials is this insert intended for? The CCMT060208-MM4 WSM20S insert is engineered primarily for stainless steel (ISO group M) and also performs well on heat‑resistant superalloys and titanium (ISO group S), offering good chip control and edge stability. What advantages does the Tiger‑tec Silver coating provide? Tiger‑tec Silver improves thermal resistance and wear behaviour on the cutting edge, helping the WSM20S grade to maintain performance under high temperatures and abrasive conditions common with stainless steel. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker produces predictable, manageable chips that reduce swarf issues and improve surface finish, which increases uptime and lowers the likelihood of workpiece marking during turning. Is the geometry suitable for finishing passes? With a Rhombic 80° form and a 0.8 mm corner radius, the insert provides a balance between strength and finish capability; it is suitable for robust semi‑finishing and can also be used for finishing with adjusted cutting parameters. What should be considered when integrating this insert into existing processes? Ensure secure toolholding and appropriate coolant application for stainless steel to exploit the WSM20S grade fully; the insert’s properties favour consistent feeds and controlled chip evacuation for reproducible production results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the brands. The offered item is an original, factory‑new product from Walter Tools.
CCMT060208-FK6 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, a Tiger‑tec Silver coated grade and a dedicated chipbreaker to ensure productive cast‑iron turning; order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT060208-FK6 WKK10S — Turning insert for cast iron, Tiger‑tec Silver, Walter Tools The CCMT060208-FK6 WKK10S is a rhombic 80° indexable turning insert designed for effective machining of cast iron components in industrial turning and boring applications. Tiger‑tec Silver coated grade WKK10S Optimised for cast iron machining Rhombic 80° insert with 0.8 mm radius 7° clearance and FK6 chipbreaker design Increased process efficiency for cast iron turning The Tiger‑tec Silver coating combined with the WKK10S grade delivers a robust, abrasion‑resistant cutting edge particularly suited to the short, brittle chips typical of cast iron. This composition reduces flank and crater wear under cyclic loads, resulting in more consistent tool life and fewer insert changes. For production environments where uptime is critical, the coated grade supports stable cutting at moderate to high speeds, helping to keep cycle times predictable and the production flow continuous. Reliable chip control and surface quality The FK6 chipbreaker geometry is engineered to break chips reliably when turning cast iron, preventing long chips that can damage workpieces or interrupt automation. The rhombic 80° form offers versatility for both external turning and light bore finishing, while the 0.8 mm corner radius balances strength and surface finish. Together these features enable a controlled chip flow and a consistent workpiece appearance, reducing downstream rework and inspection time. Simple integration and predictable setup With a 7° clearance angle and standard 06 size, the insert fits common toolholder systems for indexable turning, enabling rapid tool changes and straightforward set‑up on CNC lathes. The thin 02 thickness and standard mounting geometry allow compact assembly in tight tool pockets, which is advantageous for finishing passes and when tool‑to‑tool interference must be minimised. Clear, measurable specifications mean process engineers can calculate cutting data and tool life expectations with confidence. Application benefits and cost effectiveness Specifically matched to the abrasive nature of cast iron, the material and coating combination supports longer intervals between regrinds or replacements, yielding lower operational costs per component. The grade’s balanced wear resistance and toughness make it suitable for series production where repeatable dimensional accuracy and surface integrity are required. This insert is therefore a pragmatic choice where productivity, surface quality and predictable maintenance intervals drive purchasing decisions. Contact Metav Werkzeuge today to discuss how the CCMT060208-FK6 WKK10S from Walter Tools can improve cast‑iron turning operations or to request cutting data recommendations. Technical Data Article number: CCMT060208-FK6-WKK10S-WALTER SKU: CCMT060208-FK6-WKK10S-WALTER Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S Core specifications Shape: Rhombic 80° Size code: 06 Thickness: 02 Clearance angle: 7° Corner radius: 0.8 mm Chipbreaker: FK6 Applications & features Material group: Cast iron (K) Coating/technology: Tiger‑tec Silver Tolerance class: M Execution: T Product type: Indexable turning/boring insert FAQ What materials is this insert intended for? The CCMT060208-FK6 WKK10S is optimised for machining cast iron; the WKK10S grade and Tiger‑tec Silver technology are tuned for abrasive, short‑chipping materials. Can the insert be used for finishing operations? Yes, the rhombic 80° form with a 0.8 mm corner radius enables finishing passes where good surface quality and dimensional control are required. Which chipbreaker is integrated and what is its benefit? The FK6 chipbreaker is designed for secure chip control in cast iron turning, reducing the risk of long, entangling chips and improving process safety. Is this insert compatible with standard toolholders? The 06 size and standard CCMT geometry make it compatible with common indexable turning holders; toolholder selection should follow manufacturer clamping specifications. How does the Tiger‑tec Silver coating influence productivity? The Tiger‑tec Silver coating enhances abrasion resistance and thermal stability, extending insert life under cyclic and abrasive cutting conditions typical of cast iron. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer: Walter Tools; part of Walter AG, Tübingen, Germany
CCMT060208-FK6 WKK20S WKK20S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coated carbide grade and the FK6 chipbreaker delivers reliable chip control and extended tool life in abrasive cast iron applications; the robust rhombic 80° geometry with a 0.8 mm corner radius ensures stable seating and consistent surface quality. Choose this insert where repeatable performance in cast iron turning is required. Order the CCMT060208-FK6 WKK20S directly via Metav Werkzeuge or ask our consultants if needed. CCMT060208-FK6 WKK20S turning insert for cast iron (Tiger‑tec Silver) by Walter Tools — Rhombic 80°, 0.8 mm corner radius The CCMT060208-FK6 WKK20S is a rhombic 80° coated carbide turning insert engineered for efficient machining of cast iron components in demanding shop-floor conditions. Tiger‑tec Silver coating for wear resistance FK6 chipbreaker for short, controlled chips Rhombic 80° form with 0.8 mm corner radius Consistent wear resistance for abrasive cast iron work The combination of the Tiger‑tec Silver coating and the WKK20S cutting grade is optimised for the abrasive nature and short, breaking chips common to cast iron. The multilayer coating increases wear resistance and reduces flank wear rates, which translates into longer tool life and fewer insert changes. For production environments that require steady mean-time-between-interventions, this grade offers a measurable improvement in process stability without sacrificing edge integrity. Geometry tuned for repeatable accuracy and surface quality The rhombic 80° form, together with a 7° relief angle and a 0.8 mm corner radius, provides a balance between cutting-edge strength and accessibility in tight-turning situations. The insert’s tolerance class M supports consistent seating in the toolholder, reducing variability between indexings. These geometric properties help to achieve uniform part-to-part surface finishes while maintaining dimensional control during serial turning operations. Optimised chip control to increase productivity The FK6 chipbreaker is specifically designed to produce short, manageable chips when machining cast iron. Improved chip control lowers the risk of chip entanglement and allows closer approach to fixtures and components, which in turn reduces secondary handling and cycle time. The coated-carbide construction supports higher cutting volumes and consistent output, contributing to greater productivity and lower per-part tooling costs over sustained production runs. Practical application guidance and compatibility Intended as a drilling/bore and turning indexable insert, the design supports common turning operations in workshops processing cast iron components under ISO 513 group K conditions. The insert’s sizing (plate size 06 and thickness 02) fits standard toolholders designed for CCMT-style geometry; correct seat preparation and recommended cutting data ensure best performance. When used with appropriate cutting speeds and coolant strategies for grey and nodular cast irons, the insert delivers consistent results and predictable wear behaviour. For tailored grade selection or batch supply of Walter Tools Tiger‑tec Silver inserts such as the CCMT060208-FK6 WKK20S, contact Metav Werkzeuge for expert advice and rapid delivery—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specific application parameters. Technical data Article number: CCMT060208-FK6-WKK20S-WALTER Designation: CCMT060208-FK6 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FK6 Grade: WKK20S (coated carbide) Suitable for: cast iron (K) Application: drilling/bore turning and turning indexable insert Execution: T FAQ Which materials is this insert designed for? The CCMT060208-FK6 WKK20S is formulated for machining cast iron (ISO group K), providing controlled wear behaviour and predictable chip formation on abrasive grey and nodular cast irons. What benefit does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating increases surface hardness and heat resistance, improving wear resistance and extending insert life under typical cast iron cutting conditions. How does the FK6 chipbreaker affect machining? The FK6 chipbreaker produces short, controllable chips that reduce chip management issues and enable closer tool-to-fixture work, improving process reliability and safety in automated or manual turning. What does the rhombic 80° geometry mean for operation? The rhombic 80° form offers a compromise between strong cutting edge and access to shoulder and groove features, while the 0.8 mm corner radius enhances edge strength for interrupted cuts. Is the insert suitable for high-production environments? Yes; the combined coated-carbide grade and the FK6 chip control make this insert suitable for production runs where consistent tool life and low variability are priorities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
CCMT060208-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of a high-performance insert that combines the Tiger·tec Silver coating with an FM4 chipbreaker and a robust 0.8 mm corner radius for stable machining of stainless steel; order directly via Metav Werkzeuge or consult the sales team for application-specific advice. CCMT060208-FM4 WMP20S — Rhombic 80° turning/boring insert, Tiger·tec Silver, Walter Tools The CCMT060208-FM20S is a rhombic 80° turning and boring insert engineered for reliable performance in medium to robust stainless steel machining tasks. Tiger·tec Silver coating for extended tool life FM4 chipbreaker optimised for stainless steels Rhombic 80° insert for versatile turning operations 0.8 mm corner radius for consistent edge stability Higher throughput for challenging stainless steel work The combination of the Tiger·tec Silver coating and the WMP20S grade reduces flank wear and supports stable cutting under high heat and adhesion-prone conditions common with stainless steel. The coated cemented carbide substrate, paired with an optimised chip geometry, enables more consistent chip formation and fewer interruptions for tool change. This results in a measurable improvement in machining uptime and process reliability when producing turned components that demand tight reproducibility. Enhanced edge security and chip control for dependable cycles A 0.8 mm corner radius together with the FM4 chipbreaker provides a balance between edge strength and controlled chip fragmentation. The larger corner radius supports better load distribution on the cutting edge, extending tool life in interrupted or heavy-cut scenarios, while the FM4 geometry aids evacuation of serrated or stringy chips typical of stainless steel. For workshops seeking predictable cycle times, the stable edge behaviour reduces the risk of built-up edge and part rework. Versatility across turning and boring setups The rhombic 80° shape of this insert delivers flexible cutting angles, making it suitable for a range of internal and external operations within a single tooling family. The insert geometry supports positive engagement in both finishing and medium roughing passes, allowing consolidation of tools and fewer tool changes. Its nominal plate dimensions and thickness are compatible with common toolholder systems, so integration into existing turning and boring setups is straightforward and cost-effective. Clear technical basis and procurement support Specification-driven selection helps avoid costly mismatches in process planning. The insert is designed specifically for work in stainless steel according to ISO group M and belongs to the Tiger·tec Silver series for enhanced wear resistance. For further technical data, compatibility checks or assistance with optimal cutting parameters, Metav Werkzeuge provides application support and can supply additional datasheets or test recommendations to match the machining context. For tailored selection or application advice on Walter Tools inserts such as this Tiger·tec Silver grade, contact Metav Werkzeuge today via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical consultation and fast supply. Technical data Article number: CCMT060208-FM4-WMP20S-WALTER Designation: CCMT060208-FM4 WMP20S Product type: Turning/boring indexable insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Insert shape: Rhombus 80° Insert size: 06 Plate thickness: 02 Special features Grade: WMP20S (Tiger·tec Silver) Chipbreaker: FM4 Coating: Tiger·tec Silver (coated cemented carbide) Application group: stainless steel (ISO M) Execution: T FAQ Is this insert suitable for stainless steel machining? Yes. The CCMT060208-FM4 WMP20S by Walter Tools is developed for stainless steel (ISO M), offering secure chip formation and thermal stability in such materials. Which operations suit this rhombic 80° insert best? The geometry is appropriate for versatile turning and light to medium boring operations; the rhombic 80° shape supports both finishing and medium roughing. How does the FM4 chipbreaker affect performance? The FM4 chipbreaker improves chip control for adhesion-prone materials, helping to avoid long, stringy chips and to maintain consistent surface quality with the WMP20S grade. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver increases wear resistance and edge security under thermal load, extending tool life and stabilising process windows for stainless steel applications. Can this insert be used in standard Walter toolholders? Yes. The insert designation CCMT060208-FM4 conforms to common indexable insert standards and is compatible with matching Walter toolholders designed for rhombic 80° inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
CCMT060208-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver technology and the WSM20S grade for reliable machining of demanding materials; the combination of heat-resistant coating and a robust chipbreaker ensures consistent performance and long tool life. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCMT060208-FM4 WSM20S turning insert – Walter Tools (Tiger·tec Silver, for rostfreier Stahl and superalloys) CCMT060208-FM4 WSM20S is an indexable turning and boring insert designed for heavy-duty machining of rostfreier Stahl and heat-resistant alloys, offering stable edges and reliable chip control in challenging conditions Tiger·tec Silver coating for heat resistance Optimised for rostfreier Stahl and superalloys Rhombic 80° geometry for versatile turning Consistent performance where heat and adhesion are critical The CCMT060208-FM4 WSM20S insert combines a coated carbide grade with a specialised chipbreaker to maintain stable chip formation even under high thermal load. The Tiger·tec Silver technology increases thermal resistance and reduces flank wear, which translates into longer effective tool life and fewer interruptions for tool changes. For operations that involve hard-to-cut materials, such as rostfreier Stahl and nickel-based alloys, this behaviour reduces the risk of built-up edge and improves process reliability, enabling steadier cycle times and reduced scrap rates. Geometry that supports precision and process stability The Rhombic 80° shape with a 0.8 mm corner radius and 7° relief provides a balance between cutting edge strength and accessibility into tight profiles. This geometry offers a secure cutting edge for facing and turning operations while allowing the insert to be used in a variety of toolholders and setups. The moderate corner radius helps to distribute cutting forces and reduces the likelihood of premature chipping, resulting in improved surface finish and repeatable dimensional accuracy for serial production. Chip control and cutting behaviour explained The FM4 chipbreaker is engineered to direct and fragment chips reliably across a range of feeds, supporting secure evacuation in interrupted cuts and continuous turning. Good chip control minimises rework and tool collisions, which improves shop-floor safety and machine uptime. Combined with the coated carbide grade WSM20S, the insert addresses the principal machining challenges posed by materials that produce long, stringy chips or that create elevated cutting temperatures, keeping the process both productive and more predictable. Practical integration into machining processes Adopting this insert in a machining cell favours process stability: the coated grade and geometry reduce the need for frequent tool index changes, while compatibility with standard CCMT toolholders simplifies logistics. Selection of cutting parameters should consider the material group (rostfreier Stahl or superalloys) and the intended operation; the insert’s traits favour medium to heavy cuts where edge security and heat resistance are priorities. For users seeking to optimise cycle time and tool economy, the combination of coating, chipbreaker and robust geometry offers measurable gains in throughput. For application-specific recommendations on using the CCMT060208-FM4 WSM20S insert in rostfreier Stahl or superalloys, contact Metav Werkzeuge for tailored advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT060208-FM4-WSM20S-WALTER Product designation: CCMT060208-FM4 WSM20S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM20S Chipbreaker: FM4 Geometry: Rhombus 80° Relief angle: 7° Corner radius: 0,8 Plate size: 06 Plate thickness: 02 Tolerance class: M Execution: T Material designation: S / M Label / SKU: CCMT060208-FM4-WSM20S-WALTER Facts Free angle: 7° Corner radius: 0,8 Plate form: Rhombic 80° Plate size: 06 Thickness code: 02 Special features Coating: Tiger·tec Silver Grade name: WSM20S Suitable for rostfreier Stahl (M) Suitable for superalloys / titanium (S) Chip control: FM4 chipbreaker Tolerance class: M Application: turning / boring indexable insert FAQ What materials is this insert best suited for? The CCMT060208-FM4 WSM20S insert from Walter Tools is optimised for rostfreier Stahl and for heat-resistant superalloys, providing stable cutting edges and reliable chip control in these material groups. Can the insert be used for both roughing and finishing? Yes, the combination of Rhombic 80° geometry and a 0.8 mm corner radius supports both medium roughing cuts and finishing passes, depending on chosen cutting parameters and toolholder setup. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance and surface hardness, which reduces flank wear and improves tool life when machining demanding materials such as rostfreier Stahl. Is the FM4 chipbreaker suitable for interrupted cuts? The FM4 chipbreaker is designed for secure chip formation and evacuation, making it appropriate for interrupted cuts and for operations where consistent chip control is required. Which toolholders are compatible with this insert designation? The CCMT060208-FM4 geometry is compatible with standard toolholders designed for CCMT-style rhombic 80° inserts; ensure the seat and clamping match the CCMT specification. How does the insert support process reliability in production runs? By combining a heat-resistant coating, a robust chipbreaker and a strong corner radius, the insert reduces tool wear and the risk of built-up edge, contributing to fewer tool changes and more consistent cycles in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060208-FM4 WSM30S T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, robust FM4 chip control and the rhombic 80° geometry to secure consistent performance in demanding materials; order directly via Metav Werkzeuge or request application advice from our consultants. CCMT060208-FM4 WSM30S indexable turning/boring insert — Tiger‑tec Silver, Walter Tools CCMT060208-FM4 WSM30S delivers a coated carbide insert solution for turning and boring operations in stainless steels and heat‑resistant alloys. Tiger‑tec Silver coated carbide grade WSM30S Optimised FM4 chipbreaker for stable chip control Rhombic 80° CCMT insert with 0.8 mm corner radius 7° clearance angle for secure edge engagement Consistent machining in tough materials through advanced grade technology The CCMT060208-FM4 WSM30S is built on the Tiger‑tec Silver coating platform and the WSM30S grade to provide high thermal and wear resistance when working with stainless steels and heat‑resistant alloys. The coated carbide construction increases resistance to abrasive wear and edge rounding, which translates into longer tool life and fewer index changes. For production environments where maintainable cycle times and predictable replacement intervals matter, this insert offers a rational, efficiency‑oriented improvement in process stability. Geometry tuned for repeatable cutting and secure engagement The insert’s rhombic 80° shape combined with a 0.8 mm corner radius and a 7° clearance angle focuses cutting forces for steady engagement and improved edge strength. The CCMT form delivers a balance between accessibility and load distribution, while the corner radius supports moderate finishing passes without sacrificing robustness. Together these geometric choices reduce the likelihood of sudden tool failure and contribute to repeatable part quality across batches. FM4 chipbreaker for controllable chips and better surface finish The FM4 chipbreaker is designed to support continuous chip formation and controlled evacuation during turning or boring, lowering the risk of rework and component damage. Good chip control reduces cutting interruptions and helps maintain machine uptime; at the same time a well‑formed chip pattern contributes to an improved surface finish on the workpiece. For semi‑finish to finishing operations in tough materials, the chipbreaker’s functionality promotes reliable process behaviour and fewer manual interventions. Practical benefits for workshop productivity and process planning Selected for compatibility with both ISO M and ISO S material groups, this insert is suitable for applications involving stainless steels and superalloys/titanium, offering flexibility across mixed‑material production. The coated grade and optimised geometry help reduce total machining costs by extending cutting edge life and lowering tooling administration. When planning inserts for turning/boring operations, pairing this grade with appropriate cutting parameters and coolant strategies will unlock the expected efficiency gains and repeatability required in series production. Contact Metav Werkzeuge for tailored application support and to source Walter Tools inserts for demanding stainless and high‑temperature alloy machining Technical Data Article number: CCMT060208-FM4-WSM30S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060208-FM4 WSM30S Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM30S Form designation: CCMT060208-FM4 WSM30S Core data Insert shape: Rhombus 80° Insert size: 06 Corner radius: 0.8 mm Clearance angle: 7° Chipbreaker: FM4 Thickness code: 02 Tolerance class: M Execution: T Special features Coating: Tiger‑tec Silver (coated carbide) Material suitability: stainless steels, heat‑resistant alloys / titanium Application: turning and boring indexable insert Material designation: S / M FAQ Is this insert suitable for machining stainless steels? The CCMT060208-FM4 WSM30S from Walter Tools is specifically designed for stainless steels (ISO M), offering a coating and grade combination that supports secure chip formation and thermal resistance. Can the insert be used on superalloys or titanium? Yes, the WSM30S grade and Tiger‑tec Silver coating provide wear and heat resistance that make the insert appropriate for many superalloys and titanium applications (ISO S), depending on geometry and cutting data. What does the FM4 chipbreaker achieve in practice? The FM4 chipbreaker promotes controlled chip formation and evacuation, improving machining stability and contributing to a better surface finish in continuous turning operations. Which insert geometry should be selected for medium finishing? A rhombic 80° CCMT with a 0.8 mm corner radius, as on this insert, offers a compromise between strength and finish quality suitable for medium finishing in tougher materials. Is this insert compatible with standard CCMT toolholders? The insert follows the CCMT form designation and is compatible with holders designed for CCMT inserts; toolholder choice should match seat and clamp specifications for secure mounting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are used for explanation only. There is no affiliation between our company and the named manufacturers; the offered item is an original, factory‑new product of the stated manufacturer.
CCMT060208-FM6 WSM20S FM6 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust FM6 chipbreaker and a compact rhombic geometry for consistent machining of stainless steels and heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult our technical advisors for process optimisation. CCMT060208-FM6 WSM20S — Indexable Turning Insert, Tiger·tec Silver, 0.8 mm Corner Radius (Walter Tools) The CCMT060208-FM6 WSM20S is an indexable turning insert engineered for demanding metalcutting tasks, especially the machining of stainless steels and heat-resistant superalloys. Tiger·tec Silver coating for thermal resilience Optimised for stainless steels and superalloys Rhombic 80° form with 0.8 mm corner radius FM6 chipbreaker and 7° clearance for stable cutting Sustained cutting performance in heat‑challenging applications The combination of the WSM20S grade within the Tiger·tec Silver series delivers improved thermal stability and reliable edge retention under elevated temperatures. Coated carbide technology in this grade reduces adhesive wear and supports a controlled running behaviour when machining tough, work‑hardening materials. For production environments where cycle time and reproducibility matter, the coated substrate enables longer tool life and fewer interruptions for insert changes, which translates into steadier component quality and reduced process variability. Geometry that improves tool life and surface outcome The rhombic 80° form coupled with a 0.8 mm corner radius and a 7° clearance angle balances strength and accessibility for a wide range of turning operations. The geometry minimises cutting edge stress while allowing stable engagement at varying depths of cut; this reduces the risk of edge chipping and helps to maintain consistent surface finish across a series of parts. For operations requiring improved tool rigidity without sacrificing access to shoulders or grooves, the shape and corner radius support predictable contact mechanics and more uniform results. Controlled chip formation for safer machining and uptime Equipped with the FM6 chipbreaker, the insert promotes directed chip formation for safer evacuation and reduced re-cutting. Consistent chip control lowers the probability of built-up edge and secondary operations caused by tangled or long chips. In automated cells or manual lathes alike, stable chip flow supports uninterrupted cycles and reduces the need for downstream cleaning, thereby contributing to higher effective throughput and fewer quality rejects. Integration into production and handling benefits As a CCMT‑format indexable insert, this part fits standard toolholders designed for rhombic 80° plates and is straightforward to rotate or replace during planned maintenance. The combination of a coated carbide grade and optimised chip geometry supports predictable tool‑change intervals, simplifying inventory planning and reducing unexpected downtime. For machining programmers and process engineers, the insert provides a reliable baseline for parameter development when working with stainless steels and heat‑resistant alloys; further process specifics are available on request from Metav Werkzeuge. Choose Walter Tools' Tiger·tec Silver CCMT060208‑FM6 WSM20S for robust stainless‑steel and superalloy turning and contact Metav Werkzeuge for tailored technical advice and rapid supply coordination Technical Data Article number: CCMT060208-FM6-WSM20S-WALTER Designation: CCMT060208-FM6 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Form: Rhombus 80° Chipbreaker: FM6 Clearance angle: 7° Corner radius: 0.8 Plate size: 06 Plate thickness: 02 Execution: T Tolerance class: M Facts Corner radius: 0.8 mm Clearance angle: 7° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Coated carbide grade Tiger·tec Silver Suitable for stainless steels (ISO M) Suitable for heat‑resistant alloys and titanium (ISO S) Rhombic 80° geometry for versatile turning FM6 chipbreaker for controlled chips FAQ Is this insert suitable for machining stainless steels? Yes. The CCMT060208‑FM6 WSM20S from Walter Tools is specifically engineered for stainless steels (ISO M) and provides thermal resilience and stable cutting behaviour on those materials. What advantages does the Tiger·tec Silver coating offer? The Tiger·tec Silver coating enhances heat resistance and reduces adhesive wear, improving edge life and promoting consistent performance during high‑temperature cutting of difficult materials. Which operations is this insert best for? The insert is intended for general turning applications where a robust edge and reliable chip control are required, particularly when machining stainless steels and heat‑resistant alloys. How does the rhombic 80° shape affect machining? The Rhombic 80° form delivers a good compromise between edge strength and access, enabling stable cutting forces and reliable surface quality on shoulder and face turning tasks. What role does the FM6 chipbreaker play? The FM6 chipbreaker shapes chips into short, manageable forms to reduce entanglement and improve evacuation, thereby increasing process reliability and operator safety. Does the CCMT060208‑FM6 fit standard toolholders? Yes. The CCMT format is compatible with standard toolholders designed for rhombic indexable inserts, allowing straightforward installation and indexing. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods of the manufacturer. Walter Tools is a trademark of its respective owner.
CCMT060208-FP4 WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP01G grade for durable edge stability and consistent chip control; order directly via Metav Werkzeuge or contact our consultants for individual application advice. CCMT060208-FP4 WKP01G turning insert, Tiger·tec Gold, for steel and cast iron — Walter Tools CCMT060208-FP4 WKP01G is a versatile indexable insert designed for demanding steel and cast iron machining in turning and reaming-adjacent operations Tiger·tec Gold coating for extended tool life Suitable for steel and cast iron machining Rhombic 80° form with 0.8 mm corner radius FP4 chipbreaker for reliable chip control High-performance coating and grade for longer tool life The combination of the Tiger·tec Gold coating and the WKP01G carbide grade delivers a measurable increase in process stability and wear resistance during medium-duty turning on steels and cast irons. The coating reduces abrasive wear and thermal degradation, which means longer intervals between indexings and fewer tool changes — a direct gain in machine uptime and cost efficiency. The FP4 chipbreaker is engineered to generate compact, controllable chips with the typical chips from cast materials and the longer, more ductile chips from steels, improving evacuation and lowering workpiece rework rates. Geometry that enhances cutting reliability and surface quality The Rhombic 80° insert geometry with a 0.8 mm corner radius and a 7° clearance angle balances edge strength with cutting precision. The modest corner radius supports stable roughing and finishing cuts, while the clearance angle reduces rubbing and heat build-up at the flank, improving surface finish and extending edge life. Tolerance class M ensures consistent seating and repeatable positioning in standard CCMT-compatible toolholders, contributing to reliable part-to-part accuracy and reduced set-up variation. Productivity benefits through controlled chip formation and process security Stable chip control from the FP4 breaker lowers the risk of built-up edge and machine stoppages caused by tangled chips, increasing average feed rates in many applications. With suitability for both ISO group P (steel) and K (cast iron), the insert supports process consolidation across mixed production runs, reducing tool inventories and simplifying tooling logistics. The Walter Tools pedigree adds to the overall trust in repeatable results and predictable tool life under production conditions. Practical compatibility and application notes for workshop use Designed in the CCMT format, the insert is compatible with a wide range of standard CCMT toolholders used in turning operations, allowing straightforward integration into existing toolsets. It is particularly effective for medium-depth turning, profile work and applications where a balance of edge toughness and surface finish is required. For selection, match the WKP01G grade and FP4 chipbreaker to the workpiece material and intended feed/cut strategy to achieve the best compromise between tool life and productivity. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and application matching — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical advice and supply options Technical data Article number: CCMT060208-FP4-WKP01G-WALTER Designation: CCMT060208-FP4 Grade: WKP01G Series: Tiger-tec Gold Shape: Rhombus 80° Chipbreaker: FP4 Tolerance class: M Material suitability: P / K Execution: T Corner radius: 0,8 Clearance angle: 7° Plate size: 06 Plate thickness: 02 Core dimensions Corner radius: 0.8 mm Clearance angle: 7° Plate form: Rhombus 80° Plate size code: 06 Plate thickness code: 02 Special features Coating: Tiger·tec Gold Carbide type: coated cemented carbide Suitable for: Steel (ISO P) Suitable for: Cast iron (ISO K) Chip control: FP4 chipbreaker Application focus: medium-duty turning and related operations FAQ What materials is this insert suitable for? The CCMT060208-FP4 WKP01G insert is suitable for steel (ISO P) and cast iron (ISO K) applications, optimised by the Tiger·tec Gold coating and the WKP01G grade. What does the FP4 chipbreaker provide? The FP4 chipbreaker promotes compact, controllable chips for improved evacuation and reduced risk of chip entanglement during turning with this Walter Tools insert. How does the Rhombic 80° shape affect machining? The Rhombic 80° form offers a balance between access to profiles and robust cutting edge support, helping to achieve stable cuts and consistent surface quality with the CCMT insert. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength for tougher passes while still allowing acceptable surface finish in finishing operations using this insert grade. Is the insert compatible with standard CCMT toolholders? Yes, the designation CCMT indicates compatibility with standard CCMT-format toolholders, enabling straightforward replacement and integration into common turning tool systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are mentioned for explanatory purposes only. They remain the property of their respective owners. The listed brand refers to original, factory-new products from the manufacturer.
CCMT060208-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WPP10G grade for dependable wear resistance and consistent chip formation; the FP4 chipbreaker and rhombic 80° geometry ensure predictable chip control and surface finish in steel machining. Order the CCMT060208-FP4 WPP10G directly via Metav Werkzeuge or consult our specialists for process optimisation. CCMT060208-FP4 WPP10G turning/boring insert — Tiger‑tec Gold, for steel machining (Walter Tools) The CCMT060208-FP4 WPP10G is a rhombic 80° indexable insert designed for turning and drilling/reaming operations in steel, combining a Tiger‑tec Gold coated substrate with an FP4 chipbreaker to support stable chip formation and productive machining. Tiger·tec Gold coating for extended tool life WPP10G grade optimised for steel applications FP4 chipbreaker for reliable chip control Rhombic 80° form with 0.8 mm corner radius Increased productivity through predictable wear behaviour The Tiger‑tec Gold coating, paired with the WPP10G carbide grade, is engineered to deliver stable wear characteristics across a broad range of steel alloys. This combination reduces unscheduled tool changes and supports longer tool life, which translates into fewer interruptions on the shop floor and improved process uptime. For engineers planning series production, the result is a more consistent cycle time and reduced total machining cost per component. Reliable chip control and surface quality The FP4 chipbreaker geometry is tailored to promote controlled chip formation when machining steels, reducing the risk of long, entangling swarf and improving swarf evacuation. Together with the rhombic 80° form and 0.8 mm corner radius, the insert supports predictable cutting behaviour and good surface finish, especially in semi-finishing and finishing passes. The design aids stability in interrupted cuts and when entering bores. Robust geometry for versatile turning operations The rhombic 80° profile offers a favourable combination of accessibility and cutting edge strength, while the 7° clearance angle helps minimise rubbing and heat at the flank. The insert thickness and size code correspond to common toolholders for turning and boring, enabling quick tool set-up. These geometric choices balance edge life and cutting performance for everyday shop machining of unalloyed and alloyed steels. Practical application guidance for process planners This indexable insert is specified for the ISO P material group (steel) and is intended for turning and related drilling/reaming applications where consistent chip control and repeatable edge life are priorities. When integrating into a machining process, match the insert to a compatible toolholder for CCMT geometry and select cutting parameters appropriate for the workpiece steel grade and the chosen depth of cut. For tailored recommendations, technical consultation is available to align insert choice with specific cycle-time and surface-quality targets. For reliable steel turning with Tiger‑tec Gold performance, contact Metav Werkzeuge for ordering and process advice via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: CCMT060208-FP4-WPP10G-WALTER Designation: CCMT060208-FP4 WPP10G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 06 Thickness: 02 Tolerance class: M Special features Coating: Tiger‑tec Gold Chipbreaker: FP4 Shape: Rhombic 80° Material suitability: Steel (ISO P) Execution: T Product type: Drilling/reaming and turning indexable insert FAQ Is this insert suitable for general steel turning tasks? The CCMT060208-FP4 WPP10G is specified for the ISO P group and is suitable for a wide range of steel turning operations, offering consistent wear and chip control for unalloyed and alloyed steels. What benefit does the Tiger‑tec Gold coating provide? Tiger‑tec Gold improves resistance to abrasive wear and helps maintain cutting-edge integrity under the thermal and mechanical loads common when machining steels with the CCMT060208-FP4 WPP10G. Which chipbreaker is fitted and what does it do? The insert features the FP4 chipbreaker, designed to produce manageable chips and support stable machining in steel, improving swarf evacuation and surface finish during finishing to semi-finishing passes. Can this insert be used for stainless steel or hardened materials? The CCMT060208-FP4 WPP10G is designated for the ISO P material group (steel); capability for stainless steel or hardened grades is not specified for this grade and should be confirmed against alternative grades if required. How does the rhombic 80° form affect tool access and strength? The rhombic 80° geometry balances edge strength with accessibility, enabling effective turning and bore entry while maintaining a robust cutting edge suitable for standard and interrupted cuts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are listed solely for explanation. There is no affiliation between Metav Werkzeuge and Walter Tools beyond authorised distribution of original, factory-new products of the manufacturer.
CCMT060208-FP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a versatile WPP20G grade and the FP4 chipbreaker for consistent steel turning performance; order directly via Metav Werkzeuge or consult the team for application advice. CCMT060208-FP4 WPP20G turning insert — rhombic 80° geometry for steel machining | Walter Tools The CCMT060208-FP4 WPP20G is a rhombic indexable insert designed for turning operations on steel, combining a Tiger·tec Gold coating with an FP4 chipbreaker for reliable chip control in general turning applications Tiger·tec Gold coating for longer tool life WPP20G grade optimised for steel machining FP4 chipbreaker for stable chip formation Rhombic 80° shape with 0.8 mm corner radius Increased productivity through a coating and grade tailored to steel The combination of Tiger·tec Gold coating and the WPP20G grade delivers a balanced performance that addresses typical heat and chip formation when machining steel. The advanced coating reduces flank wear and supports higher cutting parameters, while the grade composition provides a compromise between wear resistance and toughness. As a result, operators achieve longer tool life and fewer insert changes, which directly contributes to reduced cycle times and improved process efficiency. This is especially relevant for batch production or mixed-series turning where consistent component quality is required. Geometry and chip control that stabilise the machining process The 80° rhombic shape (CCMT-style) combined with the FP4 chipbreaker and a 0.8 mm corner radius gives a stable cutting edge for versatile turning tasks. The geometry allows secure seating in standard toolholders and supports repeatable insert indexing. The FP4 chipbreaker is designed to produce manageable, short chips in a wide range of cutting conditions on steel, reducing risk of entanglement and improving surface finish. The insert’s 7° clearance angle helps to avoid rubbing while maintaining a positive cutting action, which is beneficial for maintaining dimensional accuracy in finishing passes. Practical benefits for shop-floor use and tool management The insert’s medium tolerance class (M) and standardised CCMT designation support straightforward tool selection and inventory control. The plate thickness code and size code ensure compatibility with common ISO toolholder ranges. Because the grade is aimed at steel applications, the insert can be used across unalloyed and alloyed steels with stable performance. This reduces the need for specialised assortments and simplifies tooling logistics for job shops and production lines seeking reliable everyday performance. Operators appreciate the predictability in wear behaviour and the repeatability when re-indexing. For reliable steel turning applications, choose the Walter Tools CCMT060208‑FP4 WPP20G insert and contact Metav Werkzeuge for sample availability or application recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT060208-FP4-WPP20G-WALTER Designation: CCMT060208-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Core data Clearance angle: 7° Corner radius: 0.8 mm Shape: Rhombic 80° Size code: 06 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: FP4 Material group suitability: P (Steel) Application: Turning / general steel machining Manufacturer brand: Walter Tools FAQ What steels is this insert suitable for? The CCMT060208‑FP4 WPP20G insert is designed for the ISO P material group and is suitable for unalloyed and alloyed steels where a balanced wear resistance and toughness are required. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes stable chip formation for turning steel, producing shorter, controlled chips that improve surface finish and reduce handling issues during production with the Walter Tools CCMT060208‑FP4 WPP20G insert. Can the insert be used for finishing and roughing? Yes; with the 0.8 mm corner radius and the WPP20G grade, the insert offers a compromise between rigidity for roughing and edge stability for finishing operations on steel components. Is the insert compatible with standard CCMT toolholders? The rhombic 80° CCMT geometry and standard size code ensure compatibility with common CCMT-compatible toolholders used in turning applications. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating improves flank wear resistance and allows more consistent cutting performance, extending insert life and enabling higher cutting parameters in steel machining with the CCMT060208‑FP4 WPP20G insert. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen belongs to the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is original and factory-new from the manufacturer.
CCMT060208-FP6 WPP20G WPP20G Wendeplatten - Walter Tools
A combination of reliable chip control, Tiger·tec Gold coating and robust geometry ensures consistent productivity in steel turning; the result is longer tool life and fewer tool changes. Order the CCMT060208-FP6 WPP20G insert directly via Metav Werkzeuge or consult the Metav team for process optimisation. CCMT060208-FP6 WPP20G rhombic 80° turning insert for steel applications — Walter Tools The CCMT060208-FP6 WPP20G is a coated carbide turning insert designed for stable machining of steels under ISO P conditions, offering a balance of wear resistance and reliable chip control. Tiger·tec Gold coating for high wear resistance Optimised FP6 chipbreaker for reliable chips Rhombic 80° shape with 0.8 mm corner radius Suitable for steel machining (ISO P classification) Consistent productivity through advanced coating and grade selection The Tiger·tec Gold coating combined with the WPP20G grade is engineered for machining steels where heat and chip formation demand a robust solution. This coating technology improves surface hardness at the cutting edge and reduces abrasive wear, which translates into longer tool life and fewer interruptions in production. For workshops processing unalloyed and alloyed steels, the insert offers an economically favourable option thanks to its resistance to flank and crater wear and its tolerance to typical cutting temperatures. Geometry tuned for secure edges and repeatable results A rhombic 80° form with a 0.8 mm corner radius and a relief angle of 7° gives a combination of edge strength and versatility. The moderate corner radius increases edge durability without compromising the ability to achieve acceptable surface finishes; the 80° form enables both conventional turning and light profiling tasks. The specified tolerance class M ensures consistent dimensions across batches, supporting predictable tool performance and straightforward programme setup on turning centres. Reliable chip control and reduced downtime The FP6 chipbreaker is optimised for steel cutting to promote predictable chip shapes and rapid evacuation from the cutting zone. Improved chip control reduces the risk of re-cutting and machine interruptions, which helps maintain cycle times and lowers the overall cost per component. When used in standard turning operations for ISO P materials, the insert supports steady feed rates and stable cutting conditions, contributing to higher process reliability and productivity in serial production. Contact Metav Werkzeuge for availability and application advice on the Walter Tools CCMT060208-FP6 WPP20G insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT060208-FP6-WPP20G-WALTER Designation: CCMT060208-FP6 ISO designation: CCMT060208-FP6 WPP20G Series: Tiger-tec Gold Grade: WPP20G Manufacturer: Walter Tools Core data Relief angle: 7° Corner radius: 0.8 mm Plate size: 06 Plate thickness: 02 Rhombus angle: 80° Tolerance class: M Features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FP6 Application: Steel (ISO P) Shape: Rhombus 80° Series classification: Tiger·tec Gold FAQ What materials is this insert suitable for? The insert is designed for machining steels and is designated for ISO P applications; the WPP20G grade and Tiger·tec Gold coating suit unalloyed and alloyed steels. Which chipbreaker and coating does the insert use? This turning grade features the FP6 chipbreaker and the Tiger·tec Gold coating, optimised for stable chip formation when turning steel. What are the key geometry specifications? The insert has a rhombic 80° form, a corner radius of 0.8 mm, a relief angle of 7°, plate size 06 and plate thickness 02, tolerance class M. How does the insert contribute to productivity? The combination of coating, grade and FP6 chipbreaker promotes wear resistance, consistent chips and fewer tool changes, which supports steady cycle times and lower manufacturing costs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are used here for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise from the manufacturer, Walter Tools.
CCMT060208-FW4 WKP01G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WKP01G grade for reliable machining of steel and cast iron; the robust FW4 chipbreaker and rhombic geometry ensure consistent chip control and long tool life. Order the insert directly via Metav Werkzeuge or consult the specialists for process data and availability. CCMT060208-FW4 WKP01G indexable turning insert — Tiger·tec Gold coating for steel and cast iron (Walter Tools) A CCMT060208-FW4 WKP01G indexable turning insert designed for productive turning of steels (ISO P) and cast irons (ISO K), combining a Tiger·tec Gold coating with an FW4 chipbreaker for stable cutting performance Tiger·tec Gold coating for long tool life Optimised FW4 chipbreaker for reliable chip control Rhombic 80° geometry, 0.8 mm corner radius Suitable for steel and cast iron machining Durable coating and grade for higher process reliability The combination of Tiger·tec Gold coating and the WKP01G grade provides enhanced resistance to abrasive and adhesive wear, which results in longer tool life under typical turning conditions. The coated carbide construction reduces flank wear and maintains cutting edge stability during extended runs, so production processes benefit from fewer insert changes and more consistent part quality. This performance is particularly relevant for operations that require repeatability and reduced downtime. Predictable chip control and improved surface finish The FW4 chipbreaker has been developed to manage the chip form typical for steels and cast irons, promoting short, controlled chips and reducing the risk of entanglement. Combined with the rhombic 80° geometry and a 0.8 mm corner radius, the insert supports steady cutting forces and improved surface integrity. In practice, this means fewer secondary operations to correct the finish and a more economical machining sequence when paired with the correct cutting parameters. Stable geometry for easy set-up and consistent results With a defined clearance angle (7°) and a tolerance class M, the insert offers dependable seating in indexable tool holders and facilitates repeatable positioning. The standardised CCMT form and size ensure compatibility with a wide range of turning holders, simplifying tool management at the workbench. The predictable mechanical behaviour of the insert reduces variability between batches, supporting higher first-pass yields and streamlined tool inventory. Application guidance and practical advantages This indexable insert is suitable for turning of steel (P) and cast iron (K) in general-purpose and production environments. The geometry and chip control suit finishing and medium-depth roughing cuts when combined with appropriate feeds and speeds for the workpiece material. For best results, match the insert to a stable toolholder, use recommended cutting parameters for the material group and monitor wear progression to determine optimal index intervals. For further technical data or tailored cutting recommendations, Metav Werkzeuge provides process support and cutting charts for workshop integration. Specify Walter Tools' Tiger·tec Gold CCMT060208-FW4 WKP01G for demanding steel and cast iron turning—contact Metav Werkzeuge for tailored cutting data and availability Technical Data Article number: CCMT060208-FW4-WKP01G-WALTER Type: Indexable turning insert Designation: CCMT060208-FW4 WKP01G Series: Tiger·tec Gold Grade: WKP01G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 06 Thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FW4 Geometry: Rhombic 80° Material suitability: steel (P), cast iron (K) FAQ Is this insert suitable for stainless steel? The CCMT060208-FW4 WKP01G is optimised for steel (P) and cast iron (K); stainless steel suitability is not specified for this grade. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and edge security, extending the service life of the insert during continuous turning of steels and cast irons. How does the FW4 chipbreaker influence machining? The FW4 chipbreaker produces short, controlled chips for safer chip evacuation and more consistent surface finish when machining P and K material groups. What does the 0.8 mm corner radius affect? A 0.8 mm corner radius balances edge strength and surface finish: it improves tool life in interrupted cuts while maintaining acceptable surface quality in finishing passes. Can the insert be indexed in standard CCMT holders? Yes, the CCMT form and tolerance class M ensure compatibility with standard CCMT indexable turning holders for straightforward installation and repeatable positioning. Walter Tools: The Walter AG (marketed as Walter Tools) is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no association between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
CCMT060208-FW4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, reliable chip control and versatile geometry for efficient turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. CCMT060208-FW4 WPP10G indexable turning insert – Tiger·tec Gold, FW4 chipbreaker (Walter Tools) The CCMT060208-FW4 WPP10G is an indexable turning insert designed for productive machining of Stahl, offering a coated-carbide grade from the Tiger·tec Gold family and an FW4 chipbreaker optimised for typical steel chip formation Tiger·tec Gold coating for extended tool life FW4 chipbreaker optimised for Stahl machining 0.8 mm corner radius for stable cutting edges Rhombic 80° form for versatile facing and turning High process reliability from advanced coating and substrate The insert combines the Tiger·tec Gold coating technology with a wear-resistant coated carbide grade WPP10G, resulting in consistently longer tool life and stable edge retention under the thermal loads generated when turning Stahl. The FW4 chipbreaker is specifically shaped to control chip formation during medium to general-purpose turning, which reduces the need for frequent interventions and supports a smoother production flow. For less experienced operators, "coated carbide" means a hard base material covered by a thin multi-layer coating that reduces wear and improves resistance to built-up edge; this is why the insert delivers repeatable cycle times and predictable tool-change intervals. Improved component finish and secure cutting due to geometry The Rhombic 80° geometry with a 0.8 mm corner radius provides a balance between edge strength and accessibility for finishing operations. The 80° form permits versatile approaches—both light finishing passes and more robust turning—while the 0.8 mm corner radius helps maintain a defined cutting edge that resists chipping. The insert’s nominal free cutting angle of 7° reduces radial cutting forces and contributes to better surface quality on turned parts, helping to meet tighter dimensional and finish requirements without sacrificing productivity. Practical fit and selection for workshop use With the ISO designation CCMT060208-FW4 WPP10G, the insert fits standard CCMT toolholders and is supplied in the compact 06 size with plate thickness 02, making it straightforward to integrate into common turning setups. The grade is specified for the ISO P group, which covers unalloyed and alloyed Stahl, so it is suitable for a wide range of workshop applications from semi-finish to general turning. When selecting inserts, match the chipbreaker and corner radius to the intended cut depth and feed to ensure the best balance of tool life and surface quality; the provided tolerance class M supports reliable interchangeability across compatible holders. For rapid supply and technical advice on Walter Tools Tiger·tec Gold turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CCMT060208-FW4-WPP10G-WALTER Label: Drehwendeschneidplatte CCMT060208-FW4 WPP10G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert ISO designation: CCMT060208-FW4 WPP10G Core specifications Insert size: 06 Thickness: 02 Corner radius: 0.8 mm Free angle: 7° Geometry: Rhombic 80° Tolerance class: M Special features Series: Tiger-tec Gold Grade: WPP10G (coated carbide) Chipbreaker: FW4 Suitable for: Stahl (ISO P) Execution: T FAQ What materials is this insert intended for? The CCMT060208-FW4 WPP10G insert from Walter Tools is specified for the ISO P group and is therefore intended for machining various types of Stahl, including unalloyed and alloyed steels. How does the FW4 chipbreaker affect machining of steel? The FW4 chipbreaker on this Walter Tools insert promotes controlled chip formation during turning of Stahl, improving surface finish and reducing the likelihood of long, tangled chips in continuous machining. Which toolholder size fits this insert? The insert follows the CCMT060208 designation and fits standard CCMT toolholders designed for the 06 size and 02 thickness; compatibility should be checked against the holder's catalog data. Will the 0.8 mm corner radius affect finishing passes? A 0.8 mm corner radius provides enhanced edge strength while still allowing good surface quality on finishing passes; it is a compromise between robustness and fine finish capability. Is this a coated or uncoated grade and what benefits does that bring? The WPP10G grade is a coated carbide in the Tiger·tec Gold family; the coating increases wear resistance and helps sustain cutting-edge integrity under the temperatures typical for Stahl turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CCMT060208-FW4 WPP20G WPP20G Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Gold coating and the FW4 chipbreaker ensures efficient, stable machining of steel components with excellent tool life; order directly via Metav Werkzeuge or consult our specialists for process integration. CCMT060208-FW4 WPP20G — Turning insert for steel, Tiger‑tec Gold by Walter Tools The CCMT060208-FW4 WPP20G turning insert is a rhombic 80° indexable cutting tip designed for productive steel machining with a 7° relief and a 0.8 mm corner radius. CCMT060208-FW4 WPP20G turning insert Tiger‑tec Gold coated carbide grade Optimised FW4 chipbreaker for steels 7° relief and 0.8 mm corner radius Maximum productivity for steel machining The combination of the Tiger‑tec Gold coating and the WPP20G grade delivers consistent cutting performance in conventional and demanding turning operations on steel (ISO group P). The advanced coating technology reduces flank wear and improves thermal resistance, allowing stable cutting conditions across a broad range of feeds and depths. The FW4 chipbreaker is optimised for predictable chip control during medium to heavy cuts, reducing rework and downtime. These technical characteristics translate directly into higher throughput and fewer tool changes, supporting continuous, cost-effective production. Reliable surface finish and repeatable tool life The insert geometry — rhombic 80° form with a 0.8 mm corner radius and 7° clearance — provides a balance between cutting strength and surface quality. The corner radius helps to withstand intermittent cuts and increases edge robustness, while the relief angle minimises build-up on the flank. With tolerance class M, dimensional consistency across batches supports repeatable set-ups and predictable part quality. Together, these features reduce scrap rates and deliver improved surface finishes with reduced rework effort, particularly in serial production of turned steel components. Practical integration and process benefits Designed as a direct fit for standard CCMT toolholders, this indexable insert simplifies tool inventory and tool-change routines. The coated carbide substrate offers a versatile performance profile ideally suited to unalloyed and alloyed steels, making it a reliable choice for general turning and finishing tasks. Selection of this insert supports shorter machining cycles thanks to improved wear resistance and stable chip formation, and it is compatible with established clamping systems for quick replacement. For process advice, Metav Werkzeuge can assist with holder selection, cutting parameters and batch optimisation to ensure the insert performs as intended within specific production environments. Contact Metav Werkzeuge for tailored cutting data, holder recommendations and availability of Walter Tools inserts; Metav Werkzeuge will support implementation and supply. Technical Data Article number/SKU: CCMT060208-FW4-WPP20G-WALTER Label: Drehwendeschneidplatte CCMT060208-FW4 WPP20G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.8 mm Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G, coated carbide Chipbreaker: FW4 Geometry: Rhombus 80° Material application: Steel (ISO group P) Execution: T FAQ What materials is this insert suitable for? The CCMT060208-FW4 WPP20G insert is designed primarily for steel (ISO group P) applications and performs well on unalloyed and alloyed steels thanks to the Tiger‑tec Gold coating. Which chipbreaker is fitted and what is its benefit? The insert uses the FW4 chipbreaker, which promotes stable chip formation and efficient evacuation during medium to heavy turning operations on steel, reducing the risk of built-up edge. What does the rhombic 80° geometry mean for machining? A rhombic 80° cutting geometry offers a good compromise between cutting edge strength and access to workpiece contours, allowing effective roughing and finishing with improved edge life. Is this insert compatible with standard CCMT toolholders? Yes, the CCMT designation indicates compatibility with standard CCMT toolholders, enabling fast, secure clamping and straightforward replacement during tool changes. How does the Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold coating increases thermal stability and reduces abrasive wear on the cutting edge, resulting in longer effective tool life and more consistent performance under typical steel turning conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no connection between our company and Walter Tools. The offered article is an original, brand-new product of the manufacturer.
CCMT060208-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Take advantage of WSM20S grade performance with the Tiger·tec Silver coating and the FW4 chipbreaker for reliable chip control and extended tool life; order genuine Walter Tools inserts directly via Metav Werkzeuge or consult the technical team for application support. CCMT060208-FW4 WSM20S rhombic 80° indexable turning insert with FW4 chipbreaker by Walter Tools The CCMT060208-FW4 WSM20S is an indexable turning insert engineered for machining rostfreier Stahl and heat-resistant alloys, offering a stable cutting edge for demanding turning operations. Tiger·tec Silver coating for high wear resistance FW4 chipbreaker for controlled chip formation Suitable for rostfreier Stahl and superalloys Rhombic 80° form with 7° clearance High-performance grade for difficult-to-machine materials The WSM20S grade, part of the Tiger·tec Silver series, is a coated carbide designed specifically for applications involving stainless steels and superalloys. Its composition promotes stable cutting edge behaviour and improved resistance to thermal loading, which reduces edge breakdown and supports longer tool life. In practice, this means fewer insert changes and more consistent part quality in components where material toughness and heat generation typically challenge standard grades. Geometry and chip control that improve process consistency The combination of the FW4 chipbreaker, rhombic 80° insert form and 7° clearance enhances chip control and contact conditions at the cutting zone. The 0.8 mm nose radius balances strength and surface finish, enabling reliable roughing with qualified finishing capability where form tolerance matters. Such geometry reduces vibration and promotes reproducible surface integrity, particularly on parts where repeatable dimensional accuracy is essential for downstream assembly. Productivity benefits and reliable tool behaviour Tolerance class M, compact size 06 and plate thickness 02 ensure repeatable mounting and stable clamping for automated toolholders. As an indexable insert, the component supports fast index changes and cost-effective use of insert corners, contributing to improved spindle uptime and lower per-part tooling cost. The grade’s focus on secure chip formation and edge retention delivers measurable productivity gains on series production of corrosion-resistant components and high-temperature alloy parts. Application guidance and selection support For practical selection, the insert performs best in turning operations on rostfreier Stahl and materials classified under ISO groups S and M, where heat resistance and edge stability are critical. When matching insert geometry and cutting data to specific machines or part geometries, Metav Werkzeuge’s technical advisers can provide tailored recommendations and cutting parameters to ensure optimal performance and process reliability. Contact Metav Werkzeuge for bespoke process recommendations and to secure genuine Walter Tools inserts suited to rostfreier Stahl and superalloy turning applications Technical data Article number: CCMT060208-FW4-WSM20S-WALTER Designation: CCMT060208-FW4 Complete designation: CCMT060208-FW4 WSM20S Manufacturer: Walter Tools Facts Clearance angle: 7° Nose radius: 0.8 mm Insert form: Rhombic 80° Size: 06 Thickness: 02 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: FW4 Substrate/coating: Coated carbide (Tiger·tec Silver technology) Suitable for: rostfreier Stahl (M) Suitable for: superalloys and titanium (S) Execution: T FAQ What materials is this insert intended for? The CCMT060208-FW4 WSM20S insert is intended for rostfreier Stahl and for heat-resistant superalloys and titanium alloys, matching the S and M ISO groups. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker on this Walter Tools insert produces consistent chip control and reduces the risk of edge build-up, which supports stable cutting and improves surface quality. Is the insert suitable for finishing as well as roughing? With its 0.8 mm nose radius and rhombic 80° form, the insert can be used for robust roughing and qualified finishing operations depending on insert geometry and cutting conditions. What are the advantages of the Tiger·tec Silver series? Tiger·tec Silver coating improves wear resistance and thermal stability, extending tool life and maintaining a stable cutting edge under the thermal stress typical of rostfreiem Stahl and superalloys. Where to get cutting data and application support? Metav Werkzeuge provides technical guidance and cutting parameter recommendations for the CCMT060208-FW4 WSM20S insert to ensure optimal process integration. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060208-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, consistent chip control and easy integration into existing holders for efficient cast iron turning; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. CCMT060208-MK4 WKK20S — Turning/Boring Insert for Cast Iron — Walter Tools The CCMT060208-MK4 WKK20S is a rhombic 80° indexable insert designed for productive turning and boring of cast iron components with optimised chip control and wear resistance. CCMT060208-MK4 WKK20S insert by Walter Tools Tiger‑tec Silver coating for high wear resistance Optimised MK4 chipbreaker for cast iron chips Rhombic 80° form, 0.8 mm nose radius Increased tool life through optimised coating and grade The combination of Tiger‑tec Silver coating and the WKK20S grade provides enhanced resistance against the abrasive wear typical of cast iron machining. This coated carbide formulation is tailored for the short, breaking chips and abrasive particles found in grey and nodular cast irons, leading to a more stable cutting edge and extended indexable-insert life. Fewer tool changes reduce machine downtime and contribute directly to lower production costs per component. Predictable chip control for uninterrupted production An MK4 chipbreaker specifically adapted to cast iron promotes immediate chip fragmentation and reliable evacuation. The result is reduced risk of chip entanglement, fewer surface blemishes and less operator intervention during long turning cycles. With consistent chip behaviour, process parameters can be standardised, increasing reproducibility across batches and supporting higher throughput without compromising surface integrity. Geometry designed for finish and strength The rhombic 80° form paired with a 0.8 mm corner radius balances profile accuracy and cutting-edge robustness. The moderate nose radius improves surface finish while maintaining strength at the cutting edge, making the insert suitable for a range of turning operations from semi-finishing to finishing. A relief angle of 7° ensures good contact geometry with many common toolholders, supporting steady cutting forces and minimised chatter on medium- to heavy-duty lathe work. Practical integration into machining workflows As a standard CCMT insert, the component fits commonly used toolholders, simplifying inventory and changeover. The plate thickness and size ensure mechanical stability under typical cast iron cutting conditions. Given its design focus, the insert is particularly suited to production environments and job shops machining cast iron where predictable performance and long runtimes matter. For specific holder compatibility and cutting-data recommendations, the technical advisors at Metav Werkzeuge can provide tailored guidance. Contact Metav Werkzeuge today for application-specific recommendations and to arrange supply of Walter Tools CCMT060208-MK4 WKK20S inserts; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CCMT060208-MK4-WKK20S-WALTER Designation: CCMT060208-MK4 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK20S Numbers / Facts Shape: Rhombus 80° Size: 06 Thickness: 02 Corner radius: 0.8 mm Relief angle: 7° Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide) Chipbreaker: MK4, optimised for cast iron Material application: suitable for cast iron Series description: WKK20S – wear-resistant, universal for cast materials Execution: T (top/standard geometry) FAQ What materials is this insert intended for? The CCMT060208-MK4 WKK20S insert and its WKK20S grade are engineered for cast iron machining and perform well with the abrasive wear and short, breaking chips typical of that material. How does the MK4 chipbreaker improve machining? The MK4 chipbreaker promotes reliable fragmentation of cast iron chips, reducing entanglement and improving surface quality, which helps maintain uninterrupted production runs. What effect does the 0.8 mm nose radius have on finish and strength? A 0.8 mm corner radius provides a practical balance between edge strength and surface finish, allowing for controlled cutting forces during semi-finish and finish turning operations. Is the rhombic 80° geometry widely compatible with holders? The rhombic 80° form is a standard geometry for many CCMT-style toolholders; verification of specific holder compatibility is recommended before mounting. How does the Tiger‑tec Silver coating benefit shop-floor processes? The Tiger‑tec Silver coating enhances wear resistance and thermal stability, extending tool life under the abrasive conditions encountered when turning cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new article of the manufacturer.
CCMT060208-MM4 WMP20G WMP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold grade WMP20G with a rhombic 80° geometry and a 0.8 mm corner radius delivers secure chip control and reliable edge strength when machining stainless steel; order directly via Metav Werkzeuge or consult our specialists for tailored cutting data and insert selection. CCMT060208-MM4 WMP20G — Rhombic 80° indexable insert, Tiger·tec Gold, Walter Tools The CCMT060208-MM4 WMP20G is a coated carbide indexable insert for drilling, boring and turning operations, optimised for medium to robust stainless steel machining in ISO M applications Tiger·tec Gold coating for wear resistance Designed for stainless steel (ISO M) Rhombic 80° geometry for stable engagement 0.8 mm corner radius and 7° relief angle High-performance grade for demanding stainless steel tasks The WMP20G grade, part of the Tiger·tec Gold family, combines a multilevel coating system with a robust substrate to reduce built-up edge and improve flank wear behaviour when cutting stainless steel. This results in more consistent tool life and fewer interruptions for tool changes, increasing process throughput. The chip control strategy embedded in the MM4 chipbreaker supports secure evacuation under the high ductility and heat-prone conditions typical for ISO M materials, translating into predictable cycle times and reduced rejects. Geometry that stabilises machining and improves surface finish The rhombic 80° shape provides a favourable lead angle for heavy engagement while maintaining a positive cutting action; this balances cutting forces and helps to avoid vibration on standard toolholders. A 0.8 mm corner radius increases edge strength for interrupted cuts or roughing passes, while the 7° relief angle minimises rubbing and thermal load at the flank. Together these geometric features deliver better surface integrity and repeatable dimensional results, especially when turning or boring shafts and sleeves in rostfreier Stahl. Coating and chip management for reliable production The coated carbide construction, identified by the Tiger·tec Gold marking, enhances thermal stability and resistance to abrasive wear, supporting longer uninterrupted production runs. The dedicated MM4 chipbreaker is tuned for stringy chips often encountered with stainless steels, promoting short, controllable chips and reduced risk of surface damage. As a Walter Tools grade, the insert benefits from proven manufacturing quality and consistent tolerances, making it suitable for both prototype work and serial production where process security matters. Contact Metav Werkzeuge today for cutting data, application advice and to order this Walter Tools WMP20G insert directly — our specialists will recommend the optimal holder and parameters; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CCMT060208-MM4-WMP20G-WALTER Designation: CCMT060208-MM4 WMP20G Brand: Walter Tools Series: Tiger·tec Gold Execution: T Core dimensions Geometry: Rhombus 80° Corner radius: 0.8 mm Relief angle: 7° Thickness code: 02 Size code: 06 Tolerance class: M Features & applications Coating / grade: WMP20G (Tiger·tec Gold) Chipbreaker: MM4 Material group: M (stainless steel) Suitable for: stainless steel machining Insert type: coated carbide indexable insert FAQ Which materials is this insert intended for? The CCMT060208-MM4 WMP20G insert from Walter Tools is specified for stainless steel (ISO M) applications and is designed to handle the toughness and heat tendency of these alloys. Is the MM4 chipbreaker suitable for roughing and finishing? The MM4 chipbreaker on this Walter Tools grade is optimised for secure chip control in medium to robust cutting conditions; it performs well in both heavier roughing passes and controlled finishing where chip form and surface integrity are priorities. Can the insert be used in standard CCMT toolholders? Yes — the CCMT060208-MM4 designation corresponds to a common rhombic 80° insert form compatible with standard CCMT toolholders; ensure correct clamping and seat cleanliness for best repeatability. How does the Tiger·tec Gold coating affect process stability? The Tiger·tec Gold multi-layer coating provides improved thermal resistance and wear protection, which helps maintain a stable cutting edge and consistent tool life in rostfreier Stahl machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no business affiliation between our company and the named brands. The offered item is original factory-new merchandise of the manufacturer (Walter Tools).
CCMT060208-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of consistent chip control, Tiger‑tec Silver coating and a compact rhombic geometry for efficient stainless steel turning; order directly via Metav Werkzeuge or contact our consultants for process advice. CCMT060208-MM4 WMP20S — Turning insert (Rhombus 80°, Tiger‑tec Silver) by Walter Tools The CCMT060208-MM4 WMP20S is a coated carbide turning insert designed for robust and reliable machining of stainless steel in medium to heavy cutting conditions. Tiger‑tec Silver coating for long tool life Optimised MM4 chipbreaker for stainless steel Rhombus 80° form for versatile turning 0.8 mm corner radius for consistent finishes High process security and material fit for stainless steel The insert combines the WMP20S grade with the Tiger‑tec Silver coating to deliver improved resistance to heat and built‑up edge when turning stainless steel. The coated carbide substrate supports a stable cutting edge under intermittent heat and adhesion‑prone workpieces, so production runs maintain a predictable tool life. The rhombic geometry and moderate clearance angle contribute to reliable engagement in conventional lathes and CNC turning centres, supporting continuity of production and reduced downtime. Consistent chip control and surface quality Equipped with the MM4 chipbreaker, this insert promotes controlled chip formation and evacuation when machining tough, ductile stainless alloys. The chipbreaker geometry reduces the risk of long, stringy chips and supports defined chip segments that ease coolant flow and prevent surface damage. As a result, the cutting process achieves improved surface integrity and a lower scrap rate, translating into a measurable efficiency gain during serial production. Geometry and specifications that aid setup and repeatability The rhombus 80° form and a 0.8 mm corner radius create a balance between strength and finishing capability: small radii reduce cutting forces on tight features while remaining robust enough for profile work. The 7° relief angle helps to avoid rubbing and supports positive cutting, while the compact insert format facilitates economical indexable use. Combined with Walter Tools’ manufacturing standards, the component ensures repeatable seating and predictable orientation in common clamp holders for turning operations. Choose Walter Tools’ Tiger‑tec Silver grade for dependable stainless steel turning and contact Metav Werkzeuge for technical consultation or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CCMT060208-MM4-WMP20S-WALTER Designation: CCMT060208-MM4 WMP20S Type: Turning insert / indexable cutting insert Series: Tiger‑tec Silver Grade: WMP20S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Relief angle: 7° Insert size: 06 Thickness code: 02 Geometry: Rhombus 80° Chipbreaker: MM4 Special features Coated carbide grade Optimised chip control for stainless steel Suitable for medium to robust cutting conditions Stable cutting edge for reduced built‑up edge Designed for turning applications FAQ What materials is this insert suitable for? The CCMT060208-MM4 WMP20S by Walter Tools is formulated for machining stainless steel and performs well in medium to robust cutting conditions. What is the benefit of the Tiger‑tec Silver coating? The Tiger‑tec Silver coating on the WMP20S grade increases thermal resistance and reduces adhesion, which helps to maintain a sharp edge and extend tool life when turning stainless steels. How does the MM4 chipbreaker affect production? The MM4 chipbreaker promotes controlled chip segmentation, improving chip evacuation and surface finish, thus lowering the risk of damage and minimising interruptions in serial machining. Is the geometry suitable for finishing operations? With a 0.8 mm corner radius and rhombic form, the insert allows decent finishing capability while remaining strong enough for profile and roughing tasks when set up correctly. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The named brand is mentioned for identification purposes only; the offered article is original, factory‑new merchandise from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com