Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT060208-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the MP4 chipbreaker for consistent chip control and extended tool life in steel turning; order the CCMT060208-MP4 WPP10G insert directly via Metav Werkzeuge or contact our consultants for process advice. CCMT060208-MP4 WPP10G turning/drilling indexable insert – Walter Tools, Tiger·tec Gold for steel machining CCMT060208-MP4 WPP10G is a rhombic 80° indexable insert designed for productive turning and drilling applications in steel. Tiger·tec Gold coating for extended tool life Coated carbide grade WPP10G for steel machining MP4 chipbreaker for reliable chip control Rhombic 80° CCMT geometry, 0.8 mm corner radius High-performance turning for steel with optimised coating and grade The Tiger·tec Gold technology combined with the WPP10G coated carbide grade is designed to deliver wear resistance and predictable performance when machining steel. This combination reduces flank wear and helps maintain cutting edge stability under typical steel cutting temperatures, which supports higher metal-removal rates and longer tool life. The result is improved operational efficiency and fewer insert changes, contributing directly to reduced non-productive time in turning operations. Controlled chip formation for safer, more consistent machining The MP4 chipbreaker provides stable chip control for a wide range of cutting conditions, promoting consistent chip fragmentation and evacuation. With a 0.8 mm corner radius the insert balances edge strength and surface finish, enabling dependable performance on both roughing and light finishing cuts. The MP4 geometry guides chips away from the cutting zone, lowering the risk of entanglement and improving process reliability even on interrupted cuts. Easy integration into existing toolholders and predictable geometry The CCMT rhombic 80° form ensures compatibility with standard turning toolholders and indexable tool systems. Thanks to the defined geometry and tolerance class M, setup precision is simplified and repeatability is increased across tool changes. The plate thickness and size classification support a wide selection of clamping options, making the component straightforward to implement in existing workshops without extensive fixture modification. Economic advantage through process security and material focus Targeted for steels (ISO group P), the insert offers a balance between tool life and productivity that can lower overall machining costs per component. Stable wear characteristics and repeatable cutting behaviour contribute to process security, reducing scrap rates and ensuring consistent surface quality. Using a purpose-engineered grade for steel machining helps to realise both throughput gains and dependable results across production runs. For procurement or machining advice on Walter Tools' Tiger·tec Gold inserts—including CCMT060208-MP4 WPP10G—contact Metav Werkzeuge for purchasing and application support at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: CCMT060208-MP4-WPP10G-WALTER SKU: CCMT060208-MP4-WPP10G-WALTER Manufacturer: Walter Tools Product type: Turning/drilling indexable insert (CCMT) Series: Tiger·tec Gold Grade: WPP10G Facts Clearance angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 80° Insert size: 06 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: MP4 Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO group P) Execution: T FAQ What materials is this insert intended for? The CCMT060208-MP4 WPP10G insert is formulated for machining steel (ISO group P) and is optimised for the thermal and mechanical conditions typical of steel turning. Which chipbreaker is fitted and what benefit does it provide? The insert features the MP4 chipbreaker, which ensures consistent chip control and safer evacuation, improving process reliability during turning operations. Is the geometry compatible with standard CCMT toolholders? Yes, the rhombic 80° CCMT form is compatible with standard CCMT toolholders, allowing straightforward integration into common turning tool systems. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating enhances wear resistance and cutting-edge stability under typical steel machining conditions, supporting longer tool life and more consistent component quality. What corner radius is recommended for mixed roughing and finishing cuts? A 0.8 mm corner radius offers a compromise between edge strength for roughing and the ability to achieve satisfactory surface finish in light finishing applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the global tooling family and is known for a comprehensive range of precision metalcutting tools. Protected trademarks and product names are the property of their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the listed brands; the offered article is an original, factory-new product of the manufacturer.
CCMT060208-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the WPP20G grade and Tiger‑tec Gold coating for extended tool life and consistent chip control; the robust MP4 chipbreaker and rhombic 80° geometry support reliable production in steel turning. Order the CCMT060208-MP4 WPP20G insert directly via Metav Werkzeuge or consult the technical team for cutting data and application advice. CCMT060208-MP4 WPP20G Turning insert — Tiger‑tec Gold grade for steel | Walter Tools CCMT060208-MP4 WPP20G is a rhombic 80° turning insert designed for general steel machining, combining a universal cutting grade with a dedicated MP4 chipbreaker for improved process stability. Tiger‑tec Gold coating for improved wear resistance Optimised MP4 chipbreaker for stable chip control Rhombic 80° form with 0.8 mm corner radius Universal grade WPP20G for steel machining Longer tool life through advanced grade and coating The CCMT060208-MP4 WPP20G insert uses the Tiger‑tec Gold coating technology and a WPP20G cutting grade to deliver higher resistance to flank and crater wear when machining steel. This combination of coating and substrate forms a coated cemented carbide construction that is tuned to the thermal and mechanical demands of steel cutting; the outcome is a measurable increase in component consistency and fewer index changes, which supports more efficient production cycles and predictable tool replacement intervals. Predictable chip behaviour and improved surface quality The MP4 chipbreaker works with the rhombic 80° geometry to produce consistently shaped chips and reduce cutting interruptions. With a 0.8 mm corner radius and a 7° relief angle, the geometry balances strength at the cutting edge with the ability to maintain good surface finish on a range of steel grades. The insert’s geometry and chip control reduce the risk of built-up edge and help to maintain stable cutting forces, which translates into improved workpiece quality and fewer process deviations. Wide applicability and process efficiency in steel turning The WPP20G grade is specified for steel applications (ISO group P) with an intended spectrum from wear‑resistant to tougher machining conditions, offering a practical compromise between tool life and toughness. The insert’s design supports both finish and moderate roughing passes in production environments where predictable performance and uptime matter. For engineering and procurement teams, the use of a proven grade from Walter Tools helps standardise inserts across turning operations and simplifies tool management. Metav Werkzeuge can provide further application charts and recommendations for specific machines and feed/speed windows. For optimised steel turning with the Walter Tools CCMT060208-MP4 WPP20G, contact Metav Werkzeuge for tailored cutting data and procurement assistance: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: CCMT060208-MP4-WPP20G-WALTER Designation: CCMT060208-MP4 WPP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger-tec Gold Grade: WPP20G Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 06 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: MP4 Material group: Steel (P) Coating: Tiger‑tec Gold coated cemented carbide Suitable for steel machining FAQ Which materials is this insert suitable for? The CCMT060208-MP4 WPP20G turning insert from Walter Tools is primarily designed for steel (ISO group P), the WPP20G grade being optimised for universal steel applications. What geometry features influence cutting performance? The rhombic 80° form, 0.8 mm corner radius and 7° relief angle combine with the MP4 chipbreaker to deliver stable cutting, consistent chip formation and improved surface finish in typical turning operations. How does the Tiger‑tec Gold grade affect tool life? The Tiger‑tec Gold coating on the WPP20G grade increases wear resistance and protects the cutting edge under the heat and pressure typical of steel machining, resulting in longer cutting life and more reliable indexing intervals. Is this insert suitable for finishing or roughing operations? WPP20G is a universal grade covering a range from more wear‑resistant to tougher variants (categories roughly corresponding to 10, 20 and 30/35), making the insert suitable for finishing and moderate roughing in steel, depending on application parameters. How does the chipbreaker help in production environments? The MP4 chipbreaker is optimised for controlled chip segmentation and evacuation, reducing interruptions and promoting consistent cycle times on CNC lathes and automated turning centres. Hersteller: Walter Tools; Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060208-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the RK4 chipbreaker to achieve consistent chip control and extended tool life in cast iron machining; order genuine Walter Tools inserts through Metav Werkzeuge or contact our consultants for tailored recommendations. CCMT060208-RK4 WKK10S – Drill and turning indexable insert, Tiger·tec Silver coating (for cast iron) · Walter Tools A CCMT060208-RK4 WKK10S is an indexable insert engineered for high-performance machining of cast iron in drilling, boring and turning operations. Tiger·tec Silver coating for improved wear resistance Optimised RK4 chipbreaker for cast iron chips Rhombic 80° shape with 0.8 mm corner radius Tolerance class M, clearance angle 7° Predictable chip control for uninterrupted production The combination of the RK4 chipbreaker and the WKK10S cutting grade gives highly predictable chip formation when working with abrasive cast iron materials. This delivers a clear rational advantage: fewer interruptions from clogged flutes or irregular chip shapes, which translates into higher machine uptime and more consistent cycle times. For production environments where repeatability matters, the controlled chip break reduces rework and improves throughput. Longer tool life through advanced coating technology The Tiger·tec Silver surface treatment is a multi-layer coating designed to resist abrasive wear typical of cast iron machining. By reducing flank wear and protecting the cutting edge, the coated cemented carbide substrate extends the service interval of the insert. The result is measurable: fewer index changes per shift and a better cost-in-use ratio for the tooling budget, while maintaining dimensional stability on critical bores and turned surfaces. Geometry engineered for accuracy and stability The rhombic 80° form combined with a 0.8 mm corner radius offers a balance between edge strength and accessibility in confined bores or tight turning contours. The moderate clearance angle of 7° and tolerance class M support stable seating in toolholders and repeatable positioning, which helps maintain process accuracy across multiple insert changes. For operators, this means easier set-up and steady surface finishes without frequent adjustments. Seamless integration into existing toolholding systems Designed in the popular CCMT format, the insert fits standard CCMT seats and can be used in compact drill heads and turning holders alike. Its coated cemented carbide composition and series designation provide clear selection criteria for procurement and inventory management. For workshop planning, the straightforward grade choice for cast iron simplifies stock keeping and reduces the risk of incorrect insert selection during busy production runs. Contact Metav Werkzeuge for availability and application advice on the CCMT060208-RK4 WKK10S insert from Walter Tools; call +49 2822 7131930 or email info@metav-werkzeuge.com for technical support and order processing Technical data Article number: CCMT060208-RK4-WKK10S-WALTER Designation: CCMT060208-RK4 WKK10S Manufacturer: Walter Tools Facts Size code: 06 Thickness code: 02 Corner radius: 0.8 mm Clearance angle: 7° Rhombic angle: 80° Tolerance class: M Special features Coated cemented carbide, Tiger·tec Silver Cutting grade: WKK10S Chipbreaker type: RK4 Application: cast iron (ISO group K) Insert form: Rhombus 80° FAQ What materials is this insert suitable for? The CCMT060208-RK4 WKK10S from Walter Tools is optimised for machining cast iron (ISO group K) and designed to handle the abrasive wear typical of those materials. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKK10S grade increases wear resistance and helps extend insert life under abrasive cast iron conditions, improving overall process economy. Can this insert be used in standard CCMT toolholders? Yes, the CCMT form is compatible with common CCMT-compatible holders used for drilling, boring and turning operations. What chip behaviour can be expected with the RK4 chipbreaker? The RK4 chipbreaker produces short, controlled chips when machining cast iron, reducing the risk of chip build-up and improving machining stability. Is this product suitable for finishing cuts? With its 0.8 mm corner radius and coated grade, the insert can achieve stable surface quality; however, final surface requirements depend on cutting data and machine stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer Walter Tools.
CCMT060208-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from a high-performance, cast-iron‑focused cutting solution with the WKK20S Tiger‑tec Silver grade and the robust RK4 chipbreaker for stable chip control; order directly via Metav Werkzeuge or ask the consultants for tailored cutting data and tool recommendations. CCMT060208-RK4 WKK20S – Turning insert, Rhombus 80°, Tiger‑tec Silver (Walter Tools) The CCMT060208-RK4 WKK20S is a coated carbide indexable insert designed for precision turning and boring operations in cast iron, combining a rhombic 80° geometry with a specialised chipbreaker for reliable chip control. Tiger‑tec Silver coated carbide grade WKK20S Optimised for cast iron (ISO K) Rhombic 80° insert geometry RK4 chipbreaker for short, stable chips Improved process efficiency through coating and chip control The combination of the Tiger‑tec Silver coating and the WKK20S grade delivers significantly enhanced wear resistance and lifecycle stability when machining cast iron. The advanced coating technology reduces abrasive wear typical of grey and nodular cast irons, which in turn extends tool life and reduces machine downtime. The integrated RK4 chipbreaker is tuned for the short, brittle chips produced from cast irons, enabling a steady evacuation pattern that lowers the risk of built‑up edge and improves feed stability. These technical characteristics translate into fewer insert changes and a more predictable production rhythm. Predictable surface finish and repeatable accuracy The rhombic 80° geometry provides a balanced cutting edge that combines strength with access to the workpiece, while the 0.8 mm nose radius helps achieve a consistent surface finish without compromising edge robustness. The insert’s 7° clearance angle supports low cutting forces and good dimensional repeatability across batch runs. As a coated carbide indexable solution, this insert offers repeatable seating and predictable performance in standard CCMT toolholders, making it straightforward to maintain process tolerances and meet quality targets in serial production. Easy integration and inventory rationalisation Available in the common CCMT06 form and a slim 02 thickness specification, the insert fits a wide range of established toolholder systems and is convenient to index and replace. The WKK20S grade is designed as a universal, wear‑resistant solution for cast iron applications, which helps to reduce the number of grades held in inventory while covering a broad spectrum of machining tasks. For shopfloors seeking consistent results and simple tool management, this insert offers pragmatic advantages in both setup speed and ongoing tool control, supporting more efficient work cycles. Contact Metav Werkzeuge for compatibility checks and request specific cutting data for Walter Tools Tiger‑tec Silver inserts by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CCMT060208-RK4-WKK20S-WALTER Designation: CCMT060208-RK4 WKK20S Product type: Turning / boring indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Core technical values Free angle: 7° Nose radius: 0.8 mm Insert size: 06 Plate thickness: 02 Tolerance class: M Materials & features Grade: WKK20S (coated carbide) Chipbreaker: RK4 Suitable for: cast iron (ISO K) Geometry: Rhombus 80° Execution: T FAQ What materials is this insert designed for? The CCMT060208-RK4 WKK20S insert is engineered primarily for cast iron machining (ISO K), with the WKK20S grade tuned to resist abrasive wear typical of those materials. What does the RK4 chipbreaker do? The RK4 chipbreaker promotes short, controllable chips when turning cast iron, improving chip evacuation and reducing the likelihood of built‑up edge during operation with the CCMT06 insert. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating increases resistance to abrasive wear and heat, extending insert life and enabling more consistent performance across long production runs when machining cast iron. Is this insert compatible with standard CCMT toolholders? Yes, the CCMT060208-RK4 WKK20S is manufactured in the common CCMT06 form factor and is compatible with widely used CCMT toolholder geometries for straightforward indexing. What edge preparation and finish can be expected? With a 0.8 mm nose radius and a rhombic 80° geometry, the insert supports good surface quality and repeatable dimensional accuracy for finishing and medium turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanation purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CCMT060208-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP20G grade and an RM4 chipbreaker for secure chip control and stable edges; this insert is designed to improve cycle times and part quality in rostfreier Stahl machining. Order the CCMT060208‑RM4 WMP20G directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CCMT060208‑RM4 WMP20G – indexable turning/boring insert by Walter Tools, Tiger·tec Gold coating, for rostfreier Stahl CCMT060208‑RM4 WMP20G is an indexable insert for turning and boring operations, optimised for rostfreier Stahl under medium to heavy conditions Tiger·tec Gold coating Optimised for rostfreier Stahl Rhombic 80° geometry 0.8 mm corner radius, 7° relief High-performance cutting for rostfreier Stahl that reduces downtime The coated grade delivers consistent performance when machining rostfreier Stahl, a group of alloys known for toughness and heat sensitivity. The Tiger·tec Gold coating combined with the WMP20G carbide substrate promotes controlled chip formation and supports a stable cutting edge, reducing the risk of built-up edge and unplanned tool changes. This results in improved process reliability and fewer interruptions to the production line. Geometry engineered for secure engagement and repeatability The Rhombic 80° shape and 0.8 mm corner radius provide a balance between edge strength and accessibility into profiles and bores. The 80° approach angle offers good radial engagement while the 7° relief minimises rubbing, which reduces heat generation at the cutting zone. Together these features support repeatable dimensional accuracy and surface finish in serial turning and bore enlargement tasks. Chip control and surface integrity for tougher alloys Equipped with the RM4 chipbreaker, the insert shapes chips into manageable forms even under interrupted cuts common in rostfreier Stahl operations. Improved chip control lowers the chance of recuts and surface damage, helping to maintain component integrity. The combination of chip control and robust edge preparation contributes to longer steady-state cutting and consistent surface quality. Productivity gains through tougher coating and grade selection The WMP20G grade is part of the Tiger·tec Gold range and is chosen for its balanced wear resistance and toughness. In practice this can translate into higher allowable cutting speeds and longer tool life compared with uncoated or general-purpose grades, supporting shorter cycle times and lower tool consumption per part. The insert is suitable for applications where a reliable balance between economy and performance is required. Practical integration into toolholders and process chains The CCMT form factor fits standard clamping systems for indexable inserts used in turning and boring heads, enabling straightforward replacement and inventory management. The insert dimensions (06 size, 02 thickness) allow planners to harmonise tooling across similar operations, simplifying set‑ups and spare part provisioning. For process engineers, the combination of shape, grade and chipbreaker supports predictable parameter optimisation and easier machining trials. Discuss application requirements with Metav Werkzeuge to select the optimal Walter Tools Tiger·tec Gold insert and machining parameters for rostfreier Stahl components; Metav Werkzeuge can advise on toolholder compatibility and delivery options Technical data Article number: CCMT060208-RM4-WMP20G-WALTER Designation: CCMT060208-RM4 WMP20G Manufacturer: Walter Tools Numbers / Core technical data Corner radius: 0.8 mm Relief angle: 7° Plate form: Rhombic 80° Plate size: 06 Plate thickness: 02 Special features / Versions Coating: Tiger·tec Gold Grade: WMP20G Chipbreaker: RM4 Applicable material group: rostfreier Stahl Execution: T FAQ How does the WMP20G grade perform on rostfreier Stahl? The WMP20G grade, in Tiger·tec Gold technology, is formulated for rostfreier Stahl and offers a balanced combination of wear resistance and toughness that supports secure chip formation and longer steady-state cutting. Is the CCMT060208‑RM4 suitable for both turning and bore enlargement? Yes, the insert form and Rhombic 80° geometry make it appropriate for a range of turning and boring tasks where access and edge strength are required. What advantages does the RM4 chipbreaker provide? The RM4 chipbreaker helps to produce short, controllable chips during interrupted and continuous cuts, reducing recut risk and improving surface quality in demanding alloys. Can the insert be used at higher cutting speeds? The Tiger·tec Gold coating and WMP20G substrate enable higher cutting parameters compared with uncoated grades in many rostfreier Stahl applications, subject to machine and coolant capabilities. How does corner radius affect component finish and edge life? The 0.8 mm corner radius offers a compromise between edge strength—improving life under heavier feeds—and the ability to achieve acceptable surface finish and profile definition. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the referenced brands. The offered article is original, factory‑new goods from the manufacturer.
CCMT060208-RM4 WMP20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WMP20S grade for reliable machining of stainless steel, supported by RM4 chip control and a rhombic 80° form for consistent productivity; order details and application advice are available through Metav Werkzeuge. CCMT060208-RM4 WMP20S — Indexable insert for turning, rhombic 80°, Walter Tools The CCMT060208-RM4 WMP20S is a coated carbide indexable insert engineered for turning applications on stainless steel, offering stable edge performance under medium to robust cutting conditions Tiger‑tec Silver coating for wear resistance Optimised chip control RM4 geometry Rhombic 80° shape for versatile turning 0.8 mm corner radius for stable cutting edge Higher metal removal rates on stainless steel with a coated grade The combination of Tiger‑tec Silver surface engineering and the WMP20S carbide grade delivers improved thermal resistance and wear protection when machining stainless steel. The coating reduces adhesion and built‑up edge formation, which in turn helps to maintain a consistent cutting action under elevated temperatures. As a result, the insert supports longer tool life and more predictable process windows, reducing unscheduled tool changes and improving overall cycle time. Geometry and edge form that promote process stability The RM4 chipbreaker and rhombic 80° form are designed to balance chip control with cutting force distribution. The specified 0.8 mm corner radius provides a compromise between strength and surface finish, while the 7° clearance angle helps to reduce rubbing and heat generation at the flank. These geometric features translate into stable cutting behaviour, particularly in interrupted cuts or when encountering variable material properties in stainless steel components. Consistent surface quality and repeatable results in production A coated carbide insert with this configuration yields predictable surface finishes and repeatable dimensional outcomes on stainless steel workpieces. The insert’s construction and chip control minimise vibration and promote controlled chip evacuation, which benefits downstream processes such as grinding or welding preparation. For shops seeking reliable batch-to-batch consistency, this insert offers a practical balance of productivity and part quality. Application guidance and workshop integration Technical advisors at Metav Werkzeuge can provide machining parameter recommendations and compatibility notes for specific machine tools and holders. Recommended adjustments include choosing feeds that complement the 0.8 mm radius and selecting cutting speeds that exploit the thermal advantages of the Tiger‑tec Silver coating. For integration into tool lists and process sheets, the insert’s stable performance reduces inspection variance and supports leaner tool management. Contact Metav Werkzeuge for application advice on Walter Tools Tiger‑tec Silver inserts and precise ordering assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CCMT060208-RM4-WMP20S-WALTER Designation: CCMT060208-RM4 WMP20S Series: Tiger‑tec Silver Manufacturer: Walter Tools Material group: M Core dimensions Insert size: 06 Thickness: 02 Corner radius: 0.8 mm Clearance angle: 7° Insert form: Rhombic 80° Chipbreaker: RM4 Design & applications Coating: Tiger‑tec Silver (coated carbide) Grade: WMP20S Suited for: stainless steel Typical use: turning / indexable insert applications Tolerance class: M FAQ What materials is this insert suitable for? This insert is specified for stainless steel machining and the CCMT060208-RM4 WMP20S grade is tailored to handle the toughness and heat‑related challenges of those alloys. Which chipbreaker is fitted and what is its advantage? The RM4 chipbreaker delivers controlled chip formation and evacuation, improving process stability when using the CCMT060208-RM4 WMP20S in turning operations. What cutting edge preparation supports durability? The 0.8 mm corner radius and the coated carbide grade combine to strengthen the cutting edge, reducing vulnerability to chipping and extending performance on stainless steel. Is this insert compatible with general turning toolholders? The rhombic 80° configuration is a common indexable insert form and is compatible with holders designed for CCMT‑series inserts; toolholder selection should follow the machine maker’s recommendations. How does the Tiger‑tec Silver coating affect cutting parameters? Tiger‑tec Silver improves thermal and adhesive resistance, allowing more consistent cutting at speeds suited to stainless steel; Metav Werkzeuge advisors can suggest optimised feeds and speeds for specific setups. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not indicate any affiliation. The item offered is original, brand‑new goods from Walter Tools.
CCMT060208-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of reliable edge stability, the Tiger·tec Silver coating and proven chip control for consistent results in demanding turning operations; order the insert directly via Metav Werkzeuge or consult our team for cutting data and process recommendations. CCMT060208-RM4 WSM10S – Turning insert for stainless steels and superalloys | Walter Tools CCMT060208-RM4 WSM10S is a rhombic turning insert engineered for heavy-duty and heat-resistant materials in precision turning applications Tiger·tec Silver coated cemented carbide Suitable for stainless steels and superalloys Rhombic 80° insert with 7° clearance RM4 chipformer for stable chip control Consistent cutting performance in demanding materials The CCMT060208-RM4 WSM10S insert is designed for turning stainless steels and heat-resistant alloys where reliable material removal and reproducible tool life are required. The Tiger·tec Silver coating combines thermal resistance with a wear-resistant surface, which reduces edge degradation under elevated temperatures. Thanks to the RM4 chipformer, the geometry supports secure chip control and predictable chip flow, lowering the risk of built-up edge and interruptions in batch production. This results in fewer machine stoppages and a steadier cycle time. Improved surface finish and edge security A rhombic 80° shape with a 0.8 mm corner radius and 7° clearance creates a balance between cutting strength and fine surface integrity. The insert geometry distributes cutting forces across the edge, which helps maintain a stable cutting line and improves final part finish. The coated cemented carbide substrate gives a firm cutting edge that withstands the peak temperatures typical of machining superalloys and titanium grades, delivering more consistent tolerances and fewer rework cycles per lot. Practical process benefits and simple integration Using this plate brings measurable process advantages: optimised chip evacuation, reduced tendency to form built-up edge and improved tool life consistency. The RM4 chipbreaker is tuned for a broad range of feed rates, enabling flexible use from finishing to moderate roughing. The insert format and size allow straightforward integration into standard toolholders for turn-milling and conventional turning operations, supporting fast tool changes and reduced setup time. For production environments prioritising repeatability and throughput, this geometry and coating combination provides clear operational benefits. Contact Metav Werkzeuge for tailored cutting data, batch pricing and advice on fixture and holder compatibility; Metav Werkzeuge can provide application support by e‑mail or phone to ensure optimal performance Technical Data Article number: CCMT060208-RM4-WSM10S-WALTER SKU: CCMT060208-RM4-WSM10S-WALTER Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Designation: CCMT060208-RM4 WSM10S Execution: T Facts Insert shape: Rhombus 80° Clearance: 7° Corner radius: 0.8 mm Insert size: 06 Plate thickness: 02 Chipformer: RM4 Tolerance class: M Material code: S / M Special features Coating: Tiger·tec Silver Substrate: Coated cemented carbide Application: Stainless steels and heat-resistant superalloys / titanium (ISO group M and S) Chip control: RM4 geometry optimised for stable chips Typical use: Turning and boring operations FAQ What materials is this insert suited for? The CCMT060208-RM4 WSM10S insert is specified for stainless steels and heat-resistant superalloys (ISO groups M and S), offering wear resistance and edge stability for these challenging materials. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating improves thermal resistance and reduces abrasive wear, which extends tool life and supports stable cycle times when machining demanding alloys. Which chipformer is fitted and what advantage does it bring? The plate uses the RM4 chipformer, designed to produce controllable chips and reduce the risk of built‑up edge, resulting in fewer interruptions and easier scrap handling. Is the insert suitable for finishing and roughing? The rhombic 80° geometry with a 0.8 mm corner radius and 7° clearance allows flexible use from finishing to moderate roughing, depending on cutting parameters and holder rigidity. Can the insert be used in standard turning toolholders? Yes, the CCMT format is compatible with common turning toolholders for indexable insert turning; check holder and clamp specifications to confirm seat fit and clamping style. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names remain the property of their respective owners. The brand name Walter Tools is used for identification and explanation only; there is no affiliation between Metav Werkzeuge and the named trademark owners. The offered item is an original, factory-new product of the stated manufacturer.
CCMT060208-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WSM20S grade and a 7° relief angle for secure chip control and extended edge life under demanding conditions; order the insert directly via Metav Werkzeuge or consult the team for machining recommendations. CCMT060208-RM4 WSM20S – indexable turning insert, Tiger‑tec Silver, 7° relief | Walter Tools The CCMT060208-RM4 WSM20S is an indexable turning insert optimised for heavy‑duty machining of rostfreier Stahl and heat‑resistant alloys in production environments Tiger‑tec Silver coated carbide grade WSM20S Designed for rostfreier Stahl and heat‑resistant alloys Rhombic 80° geometry with 0.8 mm corner radius RM4 chipbreaker for secure chip formation Higher productivity when machining difficult materials The coated carbide grade WSM20S from the Tiger‑tec Silver series is formulated to deliver stable cutting edges and reduced flank wear when machining demanding materials. Because the grade is optimised for the ISO groups M and S, the insert supports secure chip formation and thermal resilience during prolonged cuts in rostfreier Stahl and heat‑resistant superalloys. The result is an increase in process reliability and fewer tool changes, which translates directly to improved cycle times and predictable output in batch production. Coating and grade engineered for longer life A modern multilayer coating is combined with a wear‑resistant substrate to provide resistance against abrasive and adhesive wear mechanisms. The Tiger‑tec Silver technology reduces friction at the cutting zone and helps to maintain a consistent cutting edge, which enables higher cutting speeds and longer tool life compared with uncoated grades. This combination is particularly beneficial in operations where heat generation and built‑up edge are common, as the coating supports quicker heat dissipation and smoother chip evacuation. Geometry and chip control that stabilise the process The Rhombic 80° insert form, paired with a 0.8 mm corner radius and the RM4 chipbreaker, provides a balance between strength and precision. The 80° approach angle gives robust cutting edge engagement for interrupted or general turning, while the moderate corner radius enhances edge strength without compromising dimensional control. The RM4 chipbreaker is designed to produce manageable chip segments under varying depths of cut, which contributes to safer handling and reduced risk of chip tangling in automated setups. Practical application and integration into production The insert is specified as CCMT060208‑RM4 and is supplied in the Tiger‑tec Silver series, making it suitable for a wide range of turning operations where rostfreier Stahl and titanium alloys impose thermal and mechanical challenges. Integration into standard indexable holder systems is straightforward; the geometry supports both roughing passes where edge stability is critical and finishing passes where surface quality matters. Process windows should be validated on the component material, and cutting parameters can be adjusted to balance life and productivity for a given setup. For application advice, process parameter recommendations or to secure supply of Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for tailored support and rapid procurement assistance. Technical Data Article number: CCMT060208-RM4-WSM20S-WALTER Designation: CCMT060208-RM4 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.8 mm Insert size: 06 Thickness code: 02 Tolerance class: M Special features Grade / coating: WSM20S (Tiger‑tec Silver) Chipbreaker: RM4 Applicable materials: rostfreier Stahl (M), heat‑resistant superalloys and Titan (S) Series: Tiger‑tec Silver Execution: T FAQ What materials is this insert suitable for? The CCMT060208‑RM4 WSM20S from Walter Tools is designed primarily for rostfreier Stahl and heat‑resistant superalloys; the WSM20S grade targets ISO groups M and S. How does the Tiger‑tec Silver coating benefit cutting performance? The Tiger‑tec Silver coating on the WSM20S grade reduces friction and improves heat resistance, which helps to extend tool life and maintain consistent cutting edges during machining. Which geometry aspects improve process stability? The rhombic 80° form combined with a 0.8 mm corner radius and the RM4 chipbreaker enhances edge strength and produces controlled chip shapes, resulting in a more stable machining process. Is this insert suitable for finishing as well as roughing? Yes, the CCMT060208‑RM4 WSM20S can be used for both roughing and finishing. The geometry offers sufficient robustness for heavier cuts while supporting acceptable surface quality on finishing passes. How is chip control handled with this insert? Chip formation is managed by the RM4 chipbreaker and the coated grade, which together encourage segmented chips and reduce the occurrence of long, tangled swarf in most turning operations. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMT060208-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide grade that ensures stable chip formation and extended edge life in demanding stainless and superalloy applications; benefit from precise geometry for reliable machining and predictable tool life — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT060208-RM4 WSM30S turning / boring indexable insert — Tiger·tec Silver for rostfreier Stahl and superalloys, Walter Tools the CCMT060208-RM4 WSM30S is a turning and boring indexable insert designed for heavy-duty machining of rostfreier Stahl and high-temperature alloys, offering a coated carbide grade optimised for stable cutting and long tool life Tiger·tec Silver coated carbide grade WSM30S Optimised RM4 chipbreaker for stable chips Rhombic 80° shape with 0.8 mm corner radius 7° clearance angle for secure edge engagement Consistent performance in difficult-to-machine materials The combination of the Tiger·tec Silver coating and the WSM30S grade targets the typical challenges of machining rostfreier Stahl and heat-resistant alloys: high cutting temperatures, tendency to form built-up edge, and material ductility. By promoting stable chip formation, the grade reduces edge stress and thermal loading, which translates into longer in-process cutting intervals and fewer unplanned tool changes. For operations where cycle-time predictability matters, this translates into measurable improvements in throughput and component quality. Geometry that stabilises the cut and reduces rework Tool geometry drives predictability: the RM4 chipbreaker and rhombic 80° platform ensure controlled chip flow even under interrupted cuts, while the 0.8 mm corner radius provides a robust cutting edge that resists chipping when conditions fluctuate. The 7° clearance angle improves entry behaviour and reduces rubbing at the flank face, supporting repeatable surface quality and dimensional stability. These characteristics lower the risk of scrap and reduce downstream finishing effort. Practical benefits for workshop productivity and tool management With a compact insert form and an M tolerance grade suitable for precision setups, the CCMT06-format insert supports fast indexing and consistent seat positioning in standard toolholders. The coated carbide construction enables longer edge life under elevated temperatures, which reduces overall tooling consumption and machine downtime. This CCMT060208-RM4 WSM30S insert from Walter Tools is particularly suited where a balance of process security and economical tool life is required, helping maintain stable cycles and predictable maintenance intervals. Contact Metav Werkzeuge today for tailored advice on using Walter Tools Tiger·tec Silver inserts in rostfreier Stahl and superalloy applications and to secure the CCMT060208-RM4 WSM30S for production-critical processes Technical Data Article number: CCMT060208-RM4-WSM30S-WALTER Designation: CCMT060208-RM4 WSM30S Manufacturer: Walter Tools Series: Tiger·tec Silver Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Key measurements Clearance angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size designation: 06 Thickness designation: 02 Tolerance class: M Special features Grade: WSM30S (coated carbide) Chipbreaker: RM4 Execution: T Material groups: S / M Application focus: rostfreier Stahl and heat-resistant superalloys FAQ What materials is this insert suitable for? The CCMT060208-RM4 WSM30S is formulated for rostfreier Stahl (ISO group M) and heat-resistant superalloys (ISO group S), offering thermal resistance and stable cutting behaviour in these materials. How does the RM4 chipbreaker improve machining? The RM4 chipbreaker controls chip shape and evacuation to avoid entanglement and reduce cutting forces, which enhances process stability when machining ductile or high-temperature alloys. Can this insert be used for both turning and boring operations? Yes, the rhombic 80° geometry and the insert format make the component suitable for both turning and certain boring/enlarging tasks when mounted in compatible toolholders. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal stability and wear resistance, extending edge life during continuous or elevated-temperature cutting, which reduces tool change frequency. How does the corner radius affect surface finish? The 0.8 mm corner radius balances edge robustness and surface integrity: it resists chipping under heavier cuts while still delivering a consistent surface finish with lower tendency for vibration-induced marks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
CCMT060208-RP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and optimised RP4 chipformer to achieve consistent performance and longer tool life in steel turning. Benefit from precise geometry and stable chip control for reliable production cycles. Order original Walter Tools inserts via Metav Werkzeuge or contact our advisors for application-specific guidance. CCMT060208-RP4 WPP20G — Turning insert, rhombic 80°, Tiger·tec Gold, Walter Tools The CCMT060208-RP4 WPP20G is a rhombic 80° indexable turning insert designed for machining steel (ISO P), combining a coated carbide grade with an RP4 chipformer for stable, productive cutting. Tiger·tec Gold coated grade WPP20G RP4 chipformer for reliable chip control Rhombic 80° CCMT geometry for versatile turning 0.8 mm corner radius with 7° clearance Consistent performance with Tiger·tec Gold for steel machining The coated carbide grade WPP20G (Tiger·tec Gold) is formulated for steel applications (ISO P), delivering improved wear resistance and predictable edge behaviour under typical turning temperatures. The combination of the coating technology and the substrate provides a balance between hardness and toughness, which translates into longer tool life and fewer tool changes during production. This stability reduces process interruptions and supports tighter production schedules without compromising surface integrity. Precise geometry and chip formation that stabilise productivity The rhombic 80° CCMT shape with the RP4 chipformer is engineered to guide chips away from the cutting zone and to maintain a steady cutting force. The 0.8 mm corner radius helps to distribute cutting stresses while the 7° clearance angle reduces rubbing on the flank, resulting in improved surface quality and consistent dimension control. These geometric features reduce the need for frequent rework and allow higher metal removal rates within the limits of the machine and fixture setup. Practical versatility for finishing and general turning operations Designed primarily for the ISO P material group, the insert supports a range of steel grades from tougher to more wear-prone variants. The WPP20G grade offers a universal performance profile that favours shops requiring a dependable all-round solution rather than tool-specific optimisation for each alloy. This versatility simplifies tooling inventories and facilitates quick tooling decisions for mixed-production environments, helping to maintain throughput without sacrificing finish quality. Easy implementation in standard toolholders and predictable handling The CCMT060208-RP4 format is compatible with a wide range of standard turning toolholders, enabling straightforward integration into existing tool assemblies. The standardised form and designation speed up procurement and replacement cycles and reduce setup time at the machine. Combined with the robust coating and chip control, the insert supports stable cutting conditions that make process planning and quality control more reliable across repetitive batches. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools CCMT060208-RP4 WPP20G inserts optimised for steel turning Technical data Article number: CCMT060208-RP4-WPP20G-WALTER SKU: CCMT060208-RP4-WPP20G-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Shape: Rhombus 80° Size: 06 Thickness: 02 Corner radius: 0.8 mm Clearance angle: 7° Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold) Chipformer: RP4 Material group suitability: Steel (ISO P) Series: Tiger·tec Gold Manufacturer: Walter Tools FAQ What materials is this insert intended for? The CCMT060208-RP4 WPP20G is specified for steel applications (ISO P); the WPP20G grade and Tiger·tec Gold coating are optimised for the heat and chip characteristics typical of steel turning. How does the RP4 chipformer affect machining? The RP4 chipformer provides controlled chip breaking and evacuation, reducing the risk of entanglement and stabilising cutting forces during turning with the CCMT060208-RP4 insert. Which geometry advantages does the rhombic 80° CCMT offer? The rhombic 80° CCMT format gives versatile approach angles for a range of turning tasks, while the 0.8 mm corner radius and 7° clearance support durable cutting edges and improved surface finish. Is this an original Walter Tools grade? Yes, the WPP20G grade belongs to Walter Tools' Tiger·tec Gold family and the CCMT060208-RP4 WPP20G insert is offered as an original factory-new product. Can the insert be used in standard toolholders? The CCMT06 form factor is a common industry standard and fits compatible turning toolholders designed for CCMT inserts, enabling straightforward replacement and integration. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
CCMT060208-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of wear-resistant coating, a stable chipbreaker and a geometry tailored for steel machining to keep cycle times consistent and tool changes predictable. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting-optimised parameters. CCMT060208-RP4 WPP30G — indexable turning insert (rhombic 80°) for steel | Walter Tools The CCMT060208-RP4 WPP30G is an indexable turning insert from Walter Tools, engineered for reliable machining of steel in medium- to high-production turning and boring applications. Tiger‑tec Gold coating for high wear resistance WPP30G grade optimised for steel machining RP4 chipbreaker for stable chip control Rhombic 80° shape with 7° clearance angle Greater tool life through advanced coating and grade selection The combination of the Tiger‑tec Gold coating and the WPP30G grade delivers a balance of hardness and toughness that reduces flank and crater wear under the thermal loads typical of machining steel. This insert’s coated cemented carbide composition provides consistent cutting edge stability, which translates into longer intervals between indexings and predictable machining outcomes. Selecting this grade helps maintain surface integrity and lowers the frequency of unscheduled tool changes, supporting leaner production workflows and improved overall equipment effectiveness. Stable chip formation and robust cutting geometry for consistent cycles Equipped with the RP4 chipbreaker and a rhombic 80° footprint, the insert promotes controlled chip segmentation and safe evacuation, even in higher feed scenarios. The specified 7° clearance angle reduces rubbing at the flank while the 0.8 mm corner radius supports strength at the cutting edge, offering reliable performance on interrupted cuts and varied surface conditions. As a consequence, process stability improves and operators observe fewer instances of tool-related downtime, which is critical for serial turning operations where repeating accuracy matters. Shop-floor benefits: repeatability, compatibility and predictable handling As an indexable insert from Walter Tools’ Tiger‑tec Gold family, this component is intended for straightforward integration into standard toolholders and turning systems, enabling quick replacements and minimal rework. The combination of the selected grade and geometry reduces sensitivity to parameter variations, so machining programmes require fewer adaptations when switching batches. Where application advice or parameter tuning is required for specific workpiece alloys or cycle optimisation, support is readily available to ensure the insert meets production targets while conserving cutting resources. For production-critical turning of steel, consider the Walter Tools Tiger‑tec Gold CCMT060208-RP4 WPP30G insert and contact Metav Werkzeuge for tailored cutting data and procurement at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMT060208-RP4-WPP30G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060208-RP4 WPP30G Walter Tools Manufacturer: Walter Tools Key specifications Free angle: 7° Corner radius: 0.8 Insert form: Rhombus 80° Size: 06 Thickness code: 02 Tolerance class: M Special features Grade: WPP30G Series: Tiger‑tec Gold Chipbreaker: RP4 Material group: P (steel) Execution: T FAQ What materials is this insert suitable for? This insert is designed for machining steel; the WPP30G grade and the Tiger‑tec Gold coating are optimised for the thermal and metallurgical behaviour of steel. How does the RP4 chipbreaker affect machining performance? The RP4 chipbreaker improves chip control and helps maintain stable cutting forces, which supports uninterrupted running and reduces the risk of chip-related surface damage. Can the CCMT060208-RP4 be used in standard toolholders? Yes, the CCMT060208-RP4 WPP30G indexable insert fits common holders for rhombic 80° inserts and can be changed quickly to minimise machine downtime. What cutting edge radius is available and what does it mean for roughing or finishing? The insert has a 0.8 mm corner radius, offering robustness for medium-duty roughing while still allowing acceptable surface finish in many finishing passes. Is this an original Walter Tools product? The article is an original, factory-new product from Walter Tools and belongs to the Tiger‑tec Gold family, aimed at productive and reliable turning of steel. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product from the manufacturer.
CCMT090304-MP6 WPP20G Tiger-tec Gold Wendeplatten - Walter Tools
CCMT090304-MP6 WPP20G Drehwendeschneidplatte von Walter Tools CCMT090304-MP6 WPP20G ist eine Wendeschneidplatte für die produktive Zerspanung von Stahl und bietet gezielte Spanformung sowie hohe Verschleißfestigkeit Hohe Prozesssicherheit durch Tiger·tec Gold Beschichtung Stabiler Spanbruch mit MP6 Spanbrecher Universell für Stahl einsetzbar Rhombus 80° Form für vielseitige Einsetzbarkeit Effizienzsteigerung durch stabile Spanform und Wirtschaftlichkeit Die Kombination aus MP6 Spanbrecher und optimierter Geometrie sorgt für konstante Spanabfuhr und reduziert Rüstzeiten. Anwender profitieren von gleichmäßiger Schnittkraft und längeren Werkzeugstandzeiten, was die Produktionskosten senkt und die Ausbringung erhöht. Besonders bei Serien- und Schruppoperationen ermöglicht die Platte eine vorhersehbare Performance, die Prozesssicherheit im Fertigungsalltag erhöht. Beschichtung und Schneidstoff: langlebig und universell Die Wendeschneidplatte nutzt die Tiger·tec Gold Beschichtung in der Sorte WPP20G, eine beschichtete Hartmetallsorte, die speziell für die Bearbeitung von Stahl ausgelegt ist. Diese Beschichtung verbessert die Verschleißfestigkeit und hitzebeständigkeit und erlaubt stabilere Schnittbedingungen bei mittleren bis hohen Schnittparametern. Für Anwender bedeutet das weniger Werkzeugwechsel und konstantere Bauteilqualität. Anwendungsfelder und Zielgruppe Entwickelt für die Zerspanung unlegierter und legierter Stähle, eignet sich die Platte für Werkstätten, Lohnfertiger und Serienproduzenten, die auf reproduzierbare Resultate angewiesen sind. Durch die Rhombus 80° Form sind auch vielseitige Einsatzfälle abdeckbar, von Schruppen bis zum Planen. Die Platte ist besonders interessant, wenn Effizienz, Standzeit und zuverlässige Spansteuerung im Vordergrund stehen. Montage, Geometrie und praktische Hinweise Die Wendeschneidplatte verfügt über einen Freiwinkel von 7° und einen Eckenradius von 0,4, was präzise Schnittkontrolle bei moderaten Vorschüben ermöglicht. Die kompakte Abmessung und die einheitliche Ausführung erleichtern das Einspannen und vereinfachen Werkzeugbestückung in Standardhalter. Hinweise zur Wahl von Schnittdaten und Kühlschmierstoff richten sich nach Werkstückmaterial und Bearbeitungsziel. Empfehlung: Für wirtschaftliche Stahlbearbeitung die CCMT090304-MP6 WPP20G von Walter Tools wählen und bei technischer Beratung die eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Produktmerkmale Artikelnummer: CCMT090304-MP6-WPP20G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Sorte: WPP20G Bezeichnung: CCMT090304-MP6 Daten Freiwinkel: 7° Eckenradius: 0,4 Plattengröße: 09 Plattendicke: 03 Toleranzklasse: M Besonderheiten Spanbrecher: MP6 Schneidstoffklasse: beschichtetes Hartmetall Materialanwendung: Stahl Plattenform: Rhombus 80° Ausführung: T ISO-Bezeichnung: CCMT090304-MP6 WPP20G FAQ Welche Werkstoffe lassen sich mit der Wendeschneidplatte bearbeiten? Die Platte ist für die Bearbeitung von Stahl ausgelegt; die Sorte WPP20G und die Beschichtung Tiger·tec Gold sind auf die beim Zerspanen von Stahl typischen Wärme- und Spanbedingungen abgestimmt. Worin besteht der Vorteil des MP6 Spanbrechers? Der MP6 Spanbrecher erzeugt kontrollierte, kurze Späne, verbessert die Spanabfuhr und reduziert die Gefahr von Spanverwicklungen, was besonders bei längeren Schnittzeiten die Prozesssicherheit erhöht. Wie beeinflusst die Beschichtung die Standzeit? Die Tiger·tec Gold Beschichtung erhöht die Verschleißfestigkeit und Hitzebeständigkeit der Platte, was zu längeren Standzeiten und konstanteren Oberflächenqualitäten führt. Passt die Platte in Standardhalter für CCMT-Formate? Ja, die Geometrie entspricht gängigen CCMT-Standards; auf korrekte Einspannung und die passende Schrauben- bzw. Halterausführung achten, um optimale Ergebnisse zu erzielen. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Hersteller: Walter Tools
CCMT090308-MP6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of high process security and consistent chip control thanks to the Tiger·tec Gold grade and MP6 chipbreaker; the result is reliable tool life and stable performance in steel turning. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. CCMT090308-MP6 WPP20G turning insert — MP6 chipbreaker, Tiger·tec Gold — Walter Tools The CCMT090308-MP6 WPP20G is a rhombic 80° turning insert designed for precision steel machining, combining a Tiger·tec Gold-coated carbide grade with an MP6 chipbreaker for predictable chip formation. Tiger·tec Gold coated grade WPP20G MP6 chipbreaker for reliable chip control Rhombic 80° geometry, 0.8 mm corner radius 7° clearance and 03 thickness code Optimised cutting performance for steel components The CCMT090308-MP6 WPP20G turning insert pairs a Tiger·tec Gold coated carbide grade with a dedicated MP6 chipbreaker to deliver consistent metal removal when machining steels. The coated carbide provides improved wear resistance under the temperatures typical of steel cutting, while the chipbreaker promotes controlled chip segmentation to reduce chatter and protect the workpiece surface. For production environments this translates into fewer interrupted cycles and a more predictable tool life, supporting higher throughput and better utilisation of machine time. Stable edge geometry for improved surface finish and tool security The rhombic 80° geometry with a 0.8 mm corner radius and 7° clearance offers a robust edge that balances strength and finish quality. A larger corner radius increases edge support and reduces the risk of microchipping during intermittent cuts, while the specified clearance angle helps avoid rubbing and thermal build-up. The result is a smoother finished surface and less rework. For readers less familiar with tooling terms: the corner radius is the rounded tip at the insert corner that affects both strength and the profile left on the part; a 0.8 mm radius is a common compromise between strength and achievable surface finish. Easy integration and predictable process security on standard holders Built to the CCMT format, this insert is compatible with common toolholders and allows for quick indexation and replacement, reducing unproductive changeover time. The MP6 chipbreaker and the WPP20G grade work together to ensure stable cutting over a broad range of turning tasks in steel (ISO group P), which helps to keep cycle times consistent and reduces scrap rates. The combination supports lean production demands: steady results, less supervision during long runs and straightforward inventory management thanks to a familiar insert geometry. For proven performance with Tiger·tec Gold-coated inserts, contact Metav Werkzeuge for tailored application advice and availability — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT090308-MP6-WPP20G-WALTER Description: Drehwendeschneidplatte CCMT090308-MP6 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Gold Core data Free angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Thickness code: 03 Tolerance class: M Special features Grade/coating: WPP20G (Tiger·tec Gold) Chipbreaker type: MP6 Geometry: CCMT090308-MP6 Application: Steel (ISO P) Execution: T FAQ Which materials is this insert suitable for? The CCMT090308-MP6 WPP20G turning insert from Walter Tools is designed primarily for ISO group P materials, i.e. unalloyed and alloyed steel, where its Tiger·tec Gold grade supports typical steel cutting conditions. How does the MP6 chipbreaker affect machining? The MP6 chipbreaker on the CCMT090308-MP6 WPP20G insert promotes controlled chip segmentation and evacuation, improving process stability and reducing the likelihood of built-up edge when turning steel. Is the insert compatible with standard CCMT holders? Yes, the CCMT090308-MP6 WPP20G adheres to the CCMT format and is compatible with standard toolholders designed for CCMT inserts, allowing straightforward indexing and replacement. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold-coated WPP20G grade increases wear resistance and cutting-edge stability under the heat and loading typical of steel turning, extending the insert's useful life in many production scenarios. Is this insert suitable for finishing operations? With its 0.8 mm corner radius and rhombic 80° geometry, the CCMT090308-MP6 WPP20G provides a balance of edge strength and surface quality suitable for semi-finishing and many finishing passes, depending on machine setup and cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
CCMT09T302-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the WPP20G grade ensures extended tool life and consistent performance when machining steel; the combination of a Rhombic 80° geometry with an E47 chipbreaker delivers stable chip control and predictable surface finish—order via Metav Werkzeuge or contact the consultants for tailored advice. CCMT09T302-E47 WPP20G drill/boring indexable insert by Walter Tools — Tiger·tec Gold, for steel machining CCMT09T302-E47 WPP20G is a drill/boring indexable insert designed for reliable cutting performance in steel applications and compatible drilling/boring tool systems Tiger·tec Gold coating for improved wear resistance E47 chipbreaker for reliable chip control Rhombic 80° shape with 0.2 mm corner radius Optimised for steel machining (ISO group P) Increased productivity through coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade provides a robust wear barrier and thermal stability that contribute directly to longer tool life and fewer index changes. Designed for the thermal and chip-formation characteristics typical of steel (ISO group P), this insert helps maintain cutting edge integrity under continuous production loads. The coated carbide construction reduces flank wear, which in turn keeps machining cycles predictable and reduces rework. With improved resistance to built-up edge and abrasion, the insert supports higher productivity and a lower cost per component. Stable cutting geometry for consistent surface quality The Rhombic 80° CCMT geometry combined with the E47 chipbreaker gives a balance between versatility and chip control; the 80° shape suits a range of radial engagement angles used in drilling and boring operations, while the chipbreaker promotes stable evacuations across varying cut depths. The defined 0.2 mm corner radius and 7° relief angle produce a controlled cutting action that benefits surface finish and repeatability. These geometric features reduce vibration sensitivity and support consistent process results in medium-duty finishing and light roughing operations. Application reliability and integration into machining workflows Engineered for machining unalloyed and alloyed steels, the insert is categorised for ISO group P and matches common toolholder systems using the CCMT designation. The T3 plate thickness and the M tolerance class ensure mechanical stability in typical drilling and boring tool assemblies, while the CCMT09T302-E47 geometry allows straightforward index changes and stock management. For customers seeking reproducible results in production, this insert offers predictable wear behaviour and straightforward geometry recognition for process planning. For specification matching or to request a quotation for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for expert advice and ordering via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930. Technical data SKU: CCMT09T302-E47-WPP20G-WALTER Designation: CCMT09T302-E47 WPP20G Type: drill/boring indexable insert Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.2 mm Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: E47 Shape: Rhombic 80° Material: coated carbide (WPP20G) Application: Steel (ISO group P) Series: Tiger-tec Gold FAQ Which materials is this insert suitable for? The CCMT09T302-E47 WPP20G insert is designed primarily for steel (ISO group P), covering unalloyed and alloyed steels as indicated by the WPP20G grade. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and thermal stability, which helps the insert maintain cutting-edge integrity and prolongs service life under typical steel machining conditions. How does the E47 chipbreaker affect machining? The E47 chipbreaker promotes controlled chip formation and evacuation, supporting stable cutting conditions and consistent surface finish during drilling and boring operations. What are the key geometric details to consider for process planning? Key geometry data for planning are the Rhombic 80° shape, 0.2 mm corner radius, 7° relief angle and T3 thickness; these influence engagement strategy, surface finish and toolholder compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory-new merchandise of the manufacturer.
CCMT09T302-E47 WPP20S WPP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a compact rhombic 80° geometry for efficient, reproducible hole-making in steel; order directly via Metav Werkzeuge or consult our advisors for application support. CCMT09T302-E47 WPP20S drilling/boring indexable insert, Tiger·tec Silver, for steel — Walter Tools The CCMT09T302-E47 WPP20S is a rhombic 80° indexable insert designed for drilling and bore‑milling in steel, combining a wear‑resistant coating with a small corner radius for consistent surface finish and reliable chip control. Tiger·tec Silver coated carbide Optimised for steel machining Rhombic 80° geometry, 0.2 mm radius 7° relief angle, stable chip control Longer tool life through advanced coating and material science The combination of Tiger·tec Silver and the WPP20S grade delivers a high degree of wear resistance while maintaining toughness where it matters. The coated carbide substrate is developed to handle the typical heat and chip forms encountered when machining steel (ISO P), which reduces flank wear and extends service intervals. This results in a measurable improvement in process economy: fewer tool changes, lower running costs and more predictable production rhythms. Reliable hole quality from optimised insert geometry The rhombic 80° geometry with a 0.2 mm corner radius and a 7° relief angle provides stable cutting engagement and predictable cutting forces during drilling and bore‑milling operations. The small corner radius supports improved surface finish on bore walls while the geometry promotes controlled chip flow. For operations requiring repeatable hole tolerance and consistent finish, this geometry helps to reduce manual rework and downstream inspection time. Process security and consistent performance in production Equipped with a medium tolerance class (M) and a designated chipformer (E47), this insert supports reliable chip breaking and evacuation in demanding cycle times. The series focus on stability and repeatability reduces the frequency of unplanned stoppages, enhancing overall equipment effectiveness. Where stability and throughput are priorities, the combination of grade and design contributes directly to predictable batch quality and reduced scrap rates. Clear application range and machining guidance Designed primarily for steel machining (ISO P), the insert is suitable for unalloyed and alloyed steels where typical heat generation and chip forms occur. The WPP20S grade offers a balanced mix of wear resistance and toughness, making it a versatile choice for general steel turning, drilling and bore‑milling tasks. For unfamiliar materials or special cases, consult process data sheets or Metav Werkzeuge consultants to match cutting parameters and coolant strategies. For technical advice or to source the Walter Tools CCMT09T302-E47 WPP20S insert for steel machining, contact Metav Werkzeuge directly via info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on suitability and delivery options. Technical data Article number: CCMT09T302-E47-WPP20S-WALTER Designation: CCMT09T302-E47 WPP20S Product type: drilling/boring indexable insert Brand: Walter Tools Series: Tiger·tec Silver Facts Relief angle: 7° Corner radius: 0.2 mm Insert form: Rhombus 80° Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Grade: WPP20S Chipformer: E47 Optimised for: steel (ISO P) Application: drilling and bore‑milling operations FAQ What materials is this insert suitable for? This insert is optimised for steel applications (ISO P); the WPP20S grade and Tiger·tec Silver coating are balanced for unalloyed and alloyed steels. How does the insert geometry affect hole quality? The rhombic 80° form with a 0.2 mm corner radius and 7° relief angle provides stable cutting and improved surface finish in bore‑making operations. Is the chip control adequate for interrupted cuts? The designated chipformer E47 supports controlled chip breaking; combined with the coated carbide grade, it improves process security in many interrupted and continuous cut scenarios. Which tolerance class is specified and why does it matter? Tolerance class M is indicated, offering consistent dimensional accuracy suitable for standard production tolerances in drilling and bore‑milling. Can this insert be used for stainless steels or other non-listed materials? The insert data indicates optimisation for steel (ISO P); for stainless steels or other materials, evaluate cutting data and, if necessary, consult Metav Werkzeuge for recommended alternatives. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names (including Walter Tools) are used for explanation only and do not imply any affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is original, factory‑new goods from the manufacturer.
CCMT09T302-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the combination of a high-performance coating and a geometry tailored for stable chip control: the Tiger·tec Silver grade WSM20S provides heat resistance and edge stability for demanding alloys, while the rhombic 80° form with E47 chipbreaker improves surface finish and process reliability. Order the CCMT09T302-E47 WSM20S inserts directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T302-E47 WSM20S Drill/Bore Indexable Insert — Tiger·tec Silver, Rhombus 80° by Walter Tools The CCMT09T302-E47 WSM20S is an indexable insert for drilling and boring operations, engineered for rostfreier Stahl and heat-resistant superalloys where edge stability and controlled chip formation are critical Tiger·tec Silver coated carbide grade WSM20S Rhombus 80° form for stable entry and exit E47 chipbreaker for controlled chip formation 7° clearance and 0.2 mm corner radius High-performance grade for heat-challenging materials The insert uses the Tiger·tec Silver coating together with the WSM20S grade to resist thermal loads and preserve the cutting edge. As a coated carbide solution, it combines wear protection with toughness, which reduces the frequency of index changes and supports longer tool life. This behaviour is particularly advantageous when machining rostfreier Stahl or other heat-conducting-challenging alloys, where stable cutting edges prevent built-up edge and maintain dimensional consistency. Geometry tuned for reliable chip control and surface quality The rhombic rhombus 80° shape and the E47 chipbreaker design enable predictable chip breaking across a range of feeds. The moderate entry angle of the rhombic form improves engagement during bore entry and exit, while the 0.2 mm corner radius balances edge strength with achievable surface finish. The 7° clearance reduces rubbing and heat generation, resulting in more consistent part quality and fewer secondary operations. Versatility across ISO material groups S and M Designed for applications classified under ISO S and M, the insert supports machining of heat-resistant superalloys, titanium alloys and rostfreier Stahl. The WSM20S composition focuses on thermal stability and edge retention, making the insert suited to both interrupted and continuous cutting conditions. This versatility simplifies tool inventory by allowing one grade to cover a broader range of components in production environments. Practical benefits in production and tool management With its standard CCMT format and T3 thickness code, the insert integrates with common drill and boring toolholders, facilitating quick index changes and reducing machine downtime. The controlled chip flow from the E47 breaker lowers the risk of workpiece damage and shortens cycle times through fewer stoppages. Stable performance also means predictable wear rates, contributing to more accurate cost-per-part calculations and improved planning. Inspection, compatibility and ordering guidance The insert is supplied in the Tiger·tec Silver series and carries a tolerance class M for consistent interchangeability. Identification via the ISO-like designation ensures correct selection for regrinds and replacements; the format is compatible with conventional indexable tool systems used in drilling and boring. For specific toolholder fitment or application parameters, refer to technical specialists to confirm optimal cutting data. Contact Metav Werkzeuge for tailored recommendations on Walter Tools CCMT09T302-E47 WSM20S inserts and for assistance selecting the optimal Tiger·tec Silver grade for rostfreier Stahl machining Technical data Article number: CCMT09T302-E47-WSM20S-WALTER Product designation: CCMT09T302-E47 ISO designation: CCMT09T302-E47 WSM20S Manufacturer: Walter Tools Core specifications Free angle: 7° Corner radius: 0.2 mm Plate size: 09 Thickness: T3 Tolerance class: M Features & compatibility Grade: WSM20S Coating/series: Tiger·tec Silver Chipbreaker: E47 Shape: Rhombus 80° Material suitability: S / M Application: rostfreier Stahl, heat-resistant superalloys and titanium (ISO M / S) FAQ What materials is this insert suitable for? The CCMT09T302-E47 WSM20S insert from Walter Tools is designed for ISO groups M and S, meaning it is suitable for rostfreier Stahl and heat-resistant superalloys/titanium when appropriate cutting data are applied. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WSM20S grade increases thermal resistance and wear protection, which helps the insert maintain a stable cutting edge and extend tool life under demanding machining conditions. What is the purpose of the E47 chipbreaker? The E47 chipbreaker is engineered to produce predictable chip forms during drilling and boring, facilitating safe evacuation and reducing the risk of workpiece or tool damage with the CCMT09T302-E47 WSM20S geometry. Can this insert be used in standard toolholders for drilling and boring? Yes, the CCMT format and T3 thickness allow compatibility with common indexable drill and boring toolholders; verification of clamping and position is recommended before series production. How to select the correct corner radius and cutting parameters? Selection depends on the application; the 0.2 mm corner radius on this insert balances edge strength and surface finish. For precise parameter recommendations, consult Metav Werkzeuge or refer to the tooling supplier’s cutting data for the CCMT09T302-E47 WSM20S. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for descriptive purposes; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
CCMT09T302-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold technology and the WMP20G grade for reliable chip control and extended tool life when machining rostfreier Stahl; order the CCMT09T302‑FM4 inserts through Metav Werkzeuge or request application advice from their consultants. CCMT09T302‑FM4 WMP20G — Rhombic 80° turning insert with Tiger‑tec Gold coating by Walter Tools A CCMT09T302‑FM4 WMP20G indexable turning insert engineered for stable and productive machining of rostfreier Stahl in medium to robust cutting conditions Tiger‑tec Gold coating for extended tool life Designed for rostfreier Stahl (ISO M) machining Rhombic 80° geometry with 0.2 mm corner radius FM4 chipbreaker for reliable chip control Consistent performance for rostfreier Stahl machining The combination of the WMP20G grade and Tiger‑tec Gold technology delivers a balance of wear resistance and edge stability that is particularly effective when machining rostfreier Stahl. The coated cemented carbide substrate resists abrasive and adhesive wear, supporting a predictable tool life and fewer unscheduled tool changes. This results in higher process efficiency and reduced cycle variability for serial production. Geometry that improves cutting stability and surface quality The rhombic 80° insert shape provides versatile approach angles for turning and light profiling, while the 0.2 mm corner radius increases edge strength to withstand interrupted cuts. A 7° clearance angle reduces rubbing and heat generation at the flank, contributing to improved surface finish and longer insert life. Together these geometric choices enhance dimensional stability and help to maintain repeatable results on demanding components. FM4 chipbreaker for controlled swarf and safer operations The FM4 chipbreaker is configured to promote secure chip formation with the tougher behaviour of rostfreier Stahl, reducing the tendency for long, stringy chips that can foul the toolpath. Improved chip control lowers the risk of surface damage and simplifies chip evacuation, supporting safer, more efficient machining and less manual intervention during longer runs. Application guidance and toolroom integration This indexable insert is intended for use in standard turning toolholders compatible with CCMT‑style inserts. The combination of grade and chipbreaker suits finishing and semi‑finishing passes under medium to robust conditions on rostfreier Stahl. For optimal results, pair the insert with appropriate cutting parameters, coolant strategies and a rigid clamping system; this ensures the coated carbide edge maintains stability and reduces the likelihood of built‑up edge formation. Contact Metav Werkzeuge for tailored application support and to confirm availability of the Walter Tools CCMT09T302‑FM4 WMP20G insert, or request further technical data by e‑mail or phone. Technical data Article number: CCMT09T302‑FM4‑WMP20G‑WALTER Designation: CCMT09T302‑FM4 WMP20G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Shape: Rhombus 80° Size code: 09 Thickness: T3 Chipbreaker: FM4 Grade: WMP20G Series: Tiger‑tec Gold Special features Coated cemented carbide grade Tiger‑tec Gold Optimised for rostfreier Stahl (ISO M) Suitable for medium to robust cutting conditions Stable edge and improved wear resistance FAQ What materials is this insert suitable for? The CCMT09T302‑FM4 WMP20G insert is optimised for machining rostfreier Stahl (ISO M) and performs best under medium to robust cutting conditions. Which chipbreaker is fitted and what does it do? This insert features the FM4 chipbreaker, designed to produce short, controllable chips when turning rostfreier Stahl, improving evacuation and process safety. How does the Tiger‑tec Gold technology benefit production? Tiger‑tec Gold coating on the WMP20G grade enhances wear resistance and edge stability, which helps extend tool life and maintain consistent component quality. What toolholders are compatible with this insert shape? Rhombic 80° CCMT inserts are compatible with standard CCMT indexable turning holders; ensure the holder matches the insert thickness (T3) and clamping style. Is the insert suitable for finishing passes on challenging alloys? The coated carbide grade and 0.2 mm corner radius make the insert suitable for finishing and semi‑finishing on rostfreier Stahl, providing a good surface finish and dimensional repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter Tools: Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision cutting tools. Protected trademarks and product names remain the property of their respective owners. The mentioned brands are referenced for explanation only and do not imply any affiliation with our company.
CCMT09T302-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the proven combination of the Tiger·tec Silver coating and the WMP20S grade for secure chip formation and extended tool life; the insert’s 0.2 mm corner radius and FM4 chipbreaker deliver consistent surface quality in stainless steel. Order the CCMT09T302-FM4 WMP20S directly via Metav Werkzeuge or ask the consultants for application advice. Boring/drilling and turning indexable insert CCMT09T302-FM4 WMP20S — Tiger·tec Silver coating, 0.2 mm radius, Walter Tools The CCMT09T302-FM4 WMP20S is a rhombic 80° indexable insert for combined boring, drilling and turning operations, optimised for machining stainless steel under medium to robust cutting conditions. Tiger·tec Silver coating for increased tool life Optimised for stainless steel machining FM4 chipbreaker for secure chip control 0.2 mm corner radius for precise finishing Consistent productivity through a robust coating and grade The combination of the Tiger·tec Silver coating with the WMP20S grade provides a balance of wear resistance and edge stability, specifically developed for stainless steel. This translates into fewer unscheduled index changes and a predictable machining rhythm; a coated cemented-carbide substrate resists adhesion and thermal softening, which is crucial when machining heat-prone alloys. The result is a measurable reduction in downtime and more consistent part tolerances, especially on medium to heavy cutting tasks. Secure chip control and repeatable surface quality The FM4 chipbreaker delivers controlled chip formation even in demanding stainless steel applications, while the 0.2 mm corner radius supports fine finishing without compromising edge strength. The rhombic 80° geometry and a 7° clearance angle form a stable cutting edge that reduces vibration and improves surface finish on turned and bored faces. Explaining the terms: a chipbreaker guides and breaks the swarf into manageable lengths; a small corner radius balances finish quality and robustness, making the insert suitable for finishing passes or light roughing where surface integrity matters. Clear application guidance and process advantages Designed for versatile use in turning and boring tool holders, the indexable insert concept keeps tool inventory lean and reduces regrind cycles. The CCMT09T302-FM4 WMP20S performs reliably in serial production due to the stable chip control and consistent edge life of the WMP20S grade. For process planning, select feeds and speeds in line with stainless steel recommendations, monitor cutting temperature, and use the FM4 chip control for interrupted cuts. The practical benefit: improved throughput and predictable tool-change intervals, supporting a cost-efficient production flow without compromising component quality. Contact Metav Werkzeuge for personalised technical advice on Walter Tools CCMT09T302-FM4 WMP20S, availability and ordering; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT09T302-FM4-WMP20S-WALTER Designation: CCMT09T302-FM4 WMP20S Product type: Boring/drilling and turning indexable insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 09 Plate thickness: T3 Special features Tiger·tec Silver coating WMP20S grade (coated cemented carbide) FM4 chipbreaker Rhombic 80° geometry Material classification: M (stainless steel) Execution: T FAQ What materials is this insert suitable for? The CCMT09T302-FM4 WMP20S is specified for stainless steel and is engineered to handle the toughness and heat sensitivity typical of that material group. What does the FM4 chipbreaker do? The FM4 chipbreaker on this insert controls swarf geometry to prevent long, stringy chips and to promote safe evacuation and consistent cutting forces during machining. Can the insert be used for both turning and boring operations? Yes, the rhombic 80° form and the CCMT designation make this insert compatible with appropriate turning and boring tool holders for both operations. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating enhances wear resistance and reduces built-up edge, contributing to longer edge life and more consistent part quality over serial production runs. What finish can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius supports fine finishing while maintaining sufficient edge strength, making the insert suitable for applications where surface quality is important. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is among the world-leading manufacturers of precision tools for metalworking and is part of the Sandvik group.
CCMT09T302-FM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of the WSM01 carbide grade, Tiger‑tec Silver series and the FM4 chipbreaker for reliable chip control and extended edge life during demanding stainless and superalloy turning; order or request advice via Metav Werkzeuge for tailored process parameters and availability. CCMT09T302-FM4 WSM01 — Rhombic 80° turning insert, FM4 chipbreaker (Walter Tools) The CCMT09T302-FM4 WSM01 is a rhombic 80° turning insert engineered for stable, high‑temperature machining of stainless steel and heat‑resistant superalloys in demanding production environments Tiger‑tec Silver for extended tool life WSM01 grade for stainless steel and superalloys Rhombic 80° insert with 0.2 mm radius FM4 chipbreaker for controlled swarf Consistent performance in difficult materials The WSM01 grade, applied within the Tiger‑tec Silver series, is a coated carbide designed specifically for materials that challenge tool life and process stability. For stainless steel and high‑temperature superalloys the combination of a wear‑resistant coating and an optimised substrate supports consistent chip formation and reduces the risk of workpiece work hardening. This yields fewer interruptions for edge dressing and contributes to a more predictable production flow, which is especially valuable in batch and continuous turning operations. Geometry that stabilises the cut and improves surface quality The insert’s Rhombic 80° form with a 0.2 mm corner radius and a 7° relief angle provides a balance between edge strength and versatility. Small corner radii improve finish on softer, ductile stainless steel grades, while the controlled geometry helps to dissipate cutting forces when machining tougher superalloys. The FM4 chipbreaker is tailored to these geometries to produce manageable swarf and to protect the cutting edge, supporting a higher degree of process security and reducing secondary finishing work. Efficient integration into workshop processes Designed in the widely used CCMT format, this turning insert offers straightforward indexation and compatibility with standard toolholders that accept rhombic CCMT inserts, simplifying tool inventory. The T3 plate thickness adds edge stability under intermittent cuts, and the coated cutting surface assists with elevated cutting speeds where appropriate. For production planners and machinists, the result is fewer tool changes, reduced scrap rates and improved cycle time reliability — all contributing to better overall equipment effectiveness. Contact Metav Werkzeuge to discuss application‑specific cutting data for the CCMT09T302-FM4 WSM01, request a bespoke quotation or arrange a technical consultation tailored to machining stainless steel and superalloys Technical data SKU: CCMT09T302-FM4-WSM01-WALTER Description: CCMT09T302-FM4 WSM01 rhombic turning insert Brand: Walter Tools Series: Tiger‑tec Silver Data Relief angle: 7° Corner radius: 0.2 mm Insert size: 09 Thickness: T3 Tolerance class: M Special features Grade: WSM01 (coated carbide) Chipbreaker: FM4 Geometry: Rhombic 80° Material suitability: S / M Application focus: stainless steel and heat‑resistant superalloys FAQ What materials is this insert best suited for? The CCMT09T302-FM4 WSM01 insert is intended for stainless steel and heat‑resistant superalloys (ISO groups M and S), where the WSM01 grade supports stable chip formation and edge life. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on this Walter Tools insert promotes controlled swarf and consistent chip segmentation, which improves process reliability and reduces the chance of entanglement or surface damage. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius helps to deliver improved surface quality on ductile stainless steel grades while still maintaining adequate edge strength for interrupted or semi‑finishing cuts. Is the insert suitable for higher cutting speeds? The combination of the Tiger‑tec Silver coating and the WSM01 substrate is engineered for elevated thermal stability, enabling productive cutting speeds on challenging materials when appropriate cutting data are applied. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are cited for explanation only and imply no affiliation between our company and the mentioned brands. The offered article is original, factory‑new merchandise from the manufacturer.
CCMT09T302-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
High-performance coated carbide insert WSM10S delivers stable chip control and extended tool life; combined with a FM4 chipbreaker and a 7° relief angle, it supports consistent finishing of rostfreier Stahl and heat-resistant alloys. Order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. CCMT09T302-FM4 WSM10S — Walter Tools coated carbide turning insert with FM4 chipbreaker and 7° relief A CCMT09T302-FM4 WSM10S insert engineered for finishing and light roughing of rostfreier Stahl and superalloys in demanding production environments Tiger·tec Silver coating for edge stability Optimised FM4 chipbreaker for smooth chips 7° relief angle for consistent finishing Suitable for rostfreier Stahl and superalloys High-performance grade for demanding materials The insert is based on the WSM10S grade within the Tiger·tec Silver series, a coated carbide solution designed for materials that generate heat and demand stable cutting edges. Its metallurgy and coating combination support predictable chip formation and reduce the risk of built-up edge when machining rostfreier Stahl or nickel‑based alloys. For operations where consistent surface quality and repeatable tool life are critical, this grade balances wear resistance and toughness to sustain productivity across longer tool cycles. Geometry that improves process reliability and surface finish A carefully selected geometry delivers two tangible benefits: the 7° relief angle reduces flank contact and minimises rubbing on the workpiece, while the 0.2 mm corner radius increases edge strength without sacrificing finish. The Rhombus 80° form permits access to tight profiles and offers a versatile cutting orientation for a variety of turning tasks. Combined with the FM4 chipbreaker, the geometry promotes controlled chips and repeatable finishes, making the insert suitable where component tolerances and surface integrity matter. Coating and grade deliver longer tool life and stable cutting The Tiger·tec Silver coating is engineered for thermal stability and wear resistance under elevated cutting temperatures typical of rostfreier Stahl and heat‑resistant alloys. The coated structure helps preserve the cutting edge, extending intervals between indexings and replacements. With a tolerance class M and industrially robust substrate, the insert supports stable machining cycles and reduces unexpected downtime, contributing to measurable improvements in process economy and reproducibility. Practical fitment and application guidance Designed as a CCMT09T302-FM4 insert in size 09 with a plate thickness of T3, this component suits a range of insert holders and turning operations that demand a balance between finishing quality and edge life. The FM4 chipbreaker is tailored to produce manageable chips at medium to low feeds during finishing passes. For selection of optimal cutting data, matching insert grade to the workpiece and tool holder rigidity is essential; Metav Werkzeuge can provide cutting-parameter guidance and suggestions for holder geometry if required. Speak to Metav Werkzeuge for tailored application advice on Walter Tools turning inserts or to request a quote: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: CCMT09T302-FM4-WSM10S-WALTER Designation: CCMT09T302-FM4 Manufacturer: Walter Tools Core technical data Relief angle: 7° Corner radius: 0.2 mm Thickness: T3 Insert size: 09 Shape: Rhombus 80° Tolerance class: M Versions and features Coating: Tiger·tec Silver Grade: WSM10S Chipbreaker: FM4 Material suitability: S / M (S = superalloys / titanium; M = rostfreier Stahl) Series: Tiger‑tec Silver Base material: coated carbide FAQ What materials is this insert suitable for? The CCMT09T302-FM4 WSM10S insert is suitable for rostfreier Stahl and heat‑resistant superalloys, reflecting the intended use of the WSM10S grade in the Tiger·tec Silver series. How does the FM4 chipbreaker affect chip control? The FM4 chipbreaker on this Walter Tools insert produces compact, predictable chips under finishing conditions, improving swarf evacuation and surface consistency. What does the 0.2 mm corner radius mean for cutting performance? A 0.2 mm corner radius increases edge strength for reliable finishing without significantly compromising surface quality; it is a compromise between toughness and fine finish. Is this insert universal for all turning holders? The CCMT09T302-FM4 format is compatible with holders designed for CCMT inserts; toolholder rigidity and correct clamping are essential for achieving the advertised performance. Which series and coating are specified for wear resistance? The insert is part of the Tiger·tec Silver series and employs a coated carbide structure to enhance thermal stability and wear resistance during machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between Metav Werkzeuge and the respective trademark owners. The offered item is an original, factory‑new product from the manufacturer.
CCMT09T302-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM20S grade for secure chip control and long tool life when machining stainless steel and heat-resistant alloys; the rhombic 80° form with a 0.2 mm corner radius and 7° clearance ensures stable cutting and repeatable results. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific advice. CCMT09T302-FM4 WSM20S — Rhombic 80° indexable insert for drilling and turning (Walter Tools) The CCMT09T302-FM4 WSM20S is a rhombic 80° indexable insert designed for drilling and turning applications, optimised for stainless steel and heat‑resistant superalloys in demanding production environments. Tiger·tec Silver coating for enhanced edge life Optimised for stainless steel and superalloys Rhombic 80° form with 0.2 mm corner radius FM4 chipbreaker for reliable chip control Longer tool life through advanced coating and substrate The insert’s combination of Tiger·tec Silver technology and coated carbide substrate delivers tangible advantages in durability and process stability. The WSM20S grade is specifically engineered for materials that promote built-up edge and high temperatures; this reduces frequent tool changes and supports higher metal removal rates. In practice, the coating improves wear resistance while the substrate maintains edge strength, resulting in fewer interruptions and more predictable production cycles. Consistent chip control and secure machining of difficult alloys Equipped with the FM4 chipbreaker, the geometry produces short, controllable chips when machining stainless steel and heat‑resistant alloys, which otherwise tend to form long, stringy swarf. The optimised chip former and the insert’s design minimise tool clogging and enhance surface finish, making the component suitable for serial production where reproducibility and operator safety are priorities. Geometry that supports process reliability and versatility The rhombic 80° configuration and 0.2 mm corner radius provide a balance between strength and accessibility for internal and external operations. A 7° clearance angle reduces rubbing and thermal load at the cutting edge, while the standard size and thickness facilitate straightforward integration into common tool holders. These geometric choices translate into stable cutting forces and longer edge retention, which together improve throughput and part quality. For machining stainless steel and high‑temperature alloys with dependable edge life, contact Metav Werkzeuge for tailored recommendations and availability of the Walter Tools CCMT09T302-FM4 WSM20S insert. Technical data Article number / SKU: CCMT09T302-FM4-WSM20S-WALTER Designation: CCMT09T302-FM4 WSM20S Manufacturer: Walter Tools Grade / Sort: WSM20S Series: Tiger·tec Silver Core data Insert form: Rhombus 80° Corner radius: 0.2 mm Clearance angle: 7° Size: 09 Thickness: T3 Tolerance class: M Special features FM4 chipbreaker Coated carbide substrate (Tiger·tec Silver technology) Suitable for stainless steel (ISO group M) Suitable for heat‑resistant superalloys and titanium (ISO group S) Application: drilling/boring and turning indexable insert FAQ What materials is the CCMT09T302‑FM4 WSM20S best suited for? The CCMT09T302‑FM4 WSM20S is optimised for machining stainless steel and heat‑resistant superalloys (ISO groups M and S), offering stable chip formation and enhanced edge life. How does the Tiger·tec Silver technology benefit production? Tiger·tec Silver improves wear resistance and thermal stability on the CCMT09T302‑FM4 WSM20S, which increases tool life and reduces the frequency of insert changes during continuous or high‑load operations. What does the FM4 chipbreaker achieve in practice? The FM4 chipbreaker on this insert controls chip shape and evacuation for safer, cleaner machining, particularly when processing tough, ductile materials such as stainless steel. Is the insert compatible with standard tool holders? The insert follows common dimensional standards for its form and size (Rhombus 80°, size 09, thickness T3), enabling straightforward use in compatible indexable tool holders in turning and drilling setups. What advantages does the 0.2 mm corner radius provide? A 0.2 mm corner radius increases edge robustness compared with a sharp corner, improving resistance to chipping while maintaining acceptable surface finish for general turning and boring tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not indicate any affiliation with our company. The offered item is an original, factory‑new product from the stated manufacturer.*
CCMT09T302-FM4 WSM30S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of high process security, stable chip control and broad material coverage for reliable production results; order directly via Metav Werkzeuge or consult our specialists for application support. CCMT09T302-FM4 WSM30S Rhombic 80° indexable turning insert – Tiger·tec Silver by Walter Tools The CCMT09T302-FM4 WSM30S is a rhombic 80° indexable turning insert engineered for machining stainless steels and heat-resistant superalloys, offering a balance of edge stability and controlled chip formation in demanding turning operations. Tiger·tec Silver coating for heat-resistant cutting WSM30S carbide grade for stainless steel and superalloys Rhombic 80° insert with 0.2 mm corner radius FM4 chipbreaker for stable chip control 7° relief angle; T3 plate thickness Robust grade and coating for demanding materials The combination of the WSM30S cutting grade with Tiger·tec Silver coating delivers improved thermal resistance and consistent wear performance when machining stainless steel and nickel-based alloys. Coated carbide here means a base carbide substrate with a protective multi-layer coating that reduces friction and slows flank wear; the practical effect is longer tool life and fewer unscheduled insert changes. For production environments this translates into greater process stability and reduced downtime when turning tough, work-hardened materials. Geometry designed for edge security and surface consistency The rhombic 80° shape paired with a 0.2 mm corner radius and a 7° relief angle gives an advantageous compromise between strength and accessibility: the geometry supports robust cutting edges for interrupted cuts while still enabling plunge and profile turning where required. The FM4 chipbreaker fosters short, controllable chip forms in higher temperatures, improving surface finish and reducing the risk of built-up edge. Together these features help achieve repeatable dimensional accuracy and consistent part finish with fewer rejects. Practical benefits for workshop productivity This turning insert is suited for a wide range of turning applications on corrosion-resistant and high-temperature alloys, supporting longer production runs and consistent throughput. The plate thickness T3 and the standard CCMT09T302-FM4 format make integration into commonly used tool holders straightforward, helping to minimise tooling changes. For applicants unsure about the best grade or geometry for a specific component, Metav Werkzeuge offers technical advice; typical requests concern cutting data, holder compatibility and recommended depths of cut—support is available by email or phone for quick clarification. For consistent, productive turning of stainless steels and superalloys choose Walter Tools Tiger·tec Silver inserts — contact Metav Werkzeuge for application guidance and swift supply. Technical data SKU: CCMT09T302-FM4-WSM30S-WALTER Designation: CCMT09T302-FM4 WSM30S Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger·tec Silver Facts Relief angle: 7° Corner radius: 0.2 mm Insert shape: Rhombic 80° Insert size: 09 Plate thickness: T3 Tolerance class: M Characteristics Grade: WSM30S Coating: Tiger·tec Silver (coated carbide) Chipbreaker: FM4 Material groups: S / M (superalloys, stainless steels) Execution: T FAQ What materials is this insert suitable for? The CCMT09T302-FM4 WSM30S insert is specified for stainless steels and heat-resistant superalloys, reflecting the WSM30S grade and Tiger·tec Silver coating designed for these groups. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes short, controlled chips under higher cutting temperatures; this improves surface finish and reduces chip-related interruptions when turning tough alloys. Which geometrical advantages does the rhombic 80° form provide? Rhombic 80° geometry offers good versatility for profile and finishing operations while the 0.2 mm corner radius increases edge strength for heavier cuts. Is this insert compatible with standard CCMT tool holders? Yes, the CCMT09T302-FM4 format conforms to common CCMT holder interfaces; confirm plate thickness T3 and clearance requirements with the chosen holder. Where to get cutting data and application advice? Application-specific cutting data for the WSM30S grade can be provided by Metav Werkzeuge; they assist with speeds, feeds and holder recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T302-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of precise finishing performance, stable chip control and straightforward indexable handling to increase throughput with fewer interruptions — order the insert directly via Metav Werkzeuge or ask the consultants for cutting data and application advice. CCMT09T302-FP4 WEP10C Rhombic 80° cermet indexable insert by Walter Tools — fine finishing and stable chip control The CCMT09T302-FP4 WEP10C is an indexable turning and boring insert designed for precision finishing and consistent surface quality in general turning applications Cermet grade WEP10C for fine finishing Rhombic 80° geometry for stable cutting 7° relief angle for low cutting forces 0.2 mm corner radius for precise profiles Higher throughput through optimised cutting performance The Walter Cermet grade is engineered for finishing operations where surface quality and dimensional consistency matter. The cermet composition paired with the chipbreaker FP4 reduces built-up edge and supports a controlled chip flow, which helps to maintain steady cutting conditions and minimise unscheduled tool changes. As a result, cycle times can be kept consistent and rework is reduced. For shops seeking measurable gains in productivity, the focus on effective chip control and material-specific grades delivers a tangible performance uplift without compromising edge stability. Precise form and stability for repeatable parts The insert’s rhombic 80° shape combined with a corner radius of 0.2 mm and a 7° relief angle provides a balanced contact geometry that reduces cutting forces while preserving edge strength. This geometry supports fine finishing passes and precise profile reproduction, especially on turned parts that require close tolerances. The tolerance class M ensures consistent seat fit and repeatable positioning in standard CCMT holders, which simplifies tool setting and reduces variability in serial production runs. Selection flexibility and material guidance With a T3 thickness and plate size 09, this insert is suitable for a wide range of finishing toolholders and set-ups that accept CCMT-format inserts. The grade is part of the Walter Cermet series; suitability for specific workpiece materials should be verified in the product matrix, since the cermet composition is optimised for finishing steels and related alloys. For applications requiring particular surface finishes or specific feeds and speeds, the combination of grade and chipbreaker can be matched to the machining parameters to achieve consistent results and longer tool life. Practical advantages for workshop operation Using an indexable insert cuts down on time spent regrinding and handling brazed tools, which reduces overall tooling costs and downtime. The CCMT09T302-FP4 format enables quick rotation or replacement of inserts for continued production, supporting leaner tool inventories and faster changeovers. Walter Tools’ focus on stable edge characteristics and process security makes this insert a pragmatic choice for workshops aiming to improve first-pass yield and maintain steady production rhythms. Contact Metav Werkzeuge today to discuss the CCMT09T302-FP4 WEP10C from Walter Tools, request specific cutting data or arrange a tailored recommendation by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: CCMT09T302-FP4-WEP10C-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T302-FP4 WEP10C Walter Tools Series: Walter Cermet Grade: WEP10C Execution: T Facts Relief angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: FP4 ISO designation: CCMT09T302-FP4 WEP10C Designation without grade: CCMT09T302-FP4 Material: Katalogabhängig FAQ What materials is this insert suited for? The suitability of the CCMT09T302-FP4 WEP10C depends on the chosen Walter Cermet matrix; the product matrix should be consulted to confirm compatibility with specific materials. What is the purpose of the FP4 chipbreaker? The FP4 chipbreaker is designed to promote controlled chip formation and evacuation, supporting consistent surface finish and reduced tendency for built-up edge with finishing cuts. Can this insert be used in standard CCMT toolholders? Yes, the CCMT geometry is compatible with standard holders designed for CCMT-format inserts; correct seating according to tolerance class M ensures repeatable positioning. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius provides a fine profile result while still offering enough edge strength for finishing passes, helping to balance surface integrity and tool life. What benefit does the WEP10C grade offer? The WEP10C cermet grade is optimised for fine finishing, offering a blend of wear resistance and edge stability suitable for high-quality surface results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not indicate any affiliation with our company. The offered article is original, factory-new goods from the manufacturer Walter Tools.
CCMT09T302-FP4 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coated carbide grade and the FP4 chipbreaker for reliable chip control and consistent productivity in steel and cast iron turning operations. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCMT09T302-FP4 WKP01G – Turning and boring indexable insert with Tiger·tec Gold coating by Walter Tools A CCMT09T302-FP4 WKP01G indexable insert engineered for productive turning and boring of steel and cast iron, featuring a rhombic 80° geometry for versatile toolpath options Tiger·tec Gold coated carbide grade WKP01G Suitable for steel (P) and cast iron (K) Rhombic 80° CCMT form for versatile turning Chipbreaker FP4 for controlled chip flow Stable cutting performance across steel and cast iron The Tiger·tec Gold coating combined with the WKP01G carbide grade is formulated to deliver a balance of wear resistance and toughness, making it well suited for machining both steel and cast iron (ISO groups P and K). The coated grade supports productive cutting by resisting abrasive wear typical of cast materials while maintaining edge stability during the heat and forces generated when machining steel. With a 7° relief angle and a 0.2 mm corner radius, the geometry reduces cutting forces and helps maintain dimensional consistency on rotating parts, translating into fewer interruptions and a smoother production flow. Predictable chip control and surface quality for reliable results The FP4 chipbreaker is designed to produce short, controllable chips in a wide range of cutting conditions, reducing the risk of entanglement and improving process safety on automatic and manual lathes. The rhombic 80° CCMT shape offers flexible orientation for turning and light boring operations, while the T3 thickness and size 09 provide a compact cutting edge that supports fine surface finishes. The combination of chip control and a medium tolerance class M ensures repeatable part quality and easier post-process inspection, which is beneficial for batch and serial production environments. Efficient tool life and practical integration into existing setups The insert’s compact form and standard CCMT geometry allow straightforward integration into most common toolholders, enabling rapid index changes and minimal downtime. The WKP01G grade, as part of the Tiger·tec Gold series, emphasises economical performance with stable chip formation and good edge retention, which supports longer tool rotations between changes. For workshops targeting consistent throughput and lower process variability, this insert provides an effective balance of productivity and maintainability; application data and cutting parameters can be provided by Metav Werkzeuge to align with specific machine and material combinations. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on Walter Tools CCMT09T302-FP4 WKP01G inserts, or request guidance from our consultants for optimum integration into the production process Technical data Article number: CCMT09T302-FP4-WKP01G-WALTER Designation: CCMT09T302-FP4 WKP01G Manufacturer: Walter Tools Product type: Turning / boring indexable insert Facts Relief angle: 7° Corner radius: 0.2 mm Insert size: 09 Thickness: T3 Tolerance class: M Insert form: Rhombus 80° Chipbreaker: FP4 Series: Tiger·tec Gold Materials & special features Coated carbide grade WKP01G Suitable for Steel (P) and Cast iron (K) Stable chip formation and edge retention Designed for productive turning and light boring Compact CCMT geometry for versatile use FAQ What materials can be machined with this insert? The CCMT09T302-FP4 WKP01G insert is suitable for machining steel (ISO group P) and cast iron (ISO group K), as indicated by the WKP01G grade and Tiger·tec Gold technology. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes short, controllable chips in both steel and cast iron applications, improving process safety and reducing the need for special chip handling measures when using the CCMT09T302-FP4 WKP01G. Is the insert compatible with standard CCMT toolholders? Yes, the rhombic 80° CCMT form and standard insert dimensions allow easy fitting into common CCMT toolholders for turning and light boring operations. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius offers a compromise between edge strength and surface quality, delivering good finish on turned parts while still providing sufficient robustness for continuous production. How to obtain cutting data for specific applications? Cutting parameters and application-specific recommendations for the CCMT09T302-FP4 WKP01G are available from Metav Werkzeuge; their consultants can advise on speeds, feeds and toolholder selection. Protected trademarks and trade names belong to their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the brands named. The item offered is an original, brand-new product from the manufacturer Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com