Is it messschieber or schieblehre?

Take advantage of the combination of long-range measurement, robust carbon‑fibre construction and reliable digital output for reproducible workshop control of large components. Order the caliper directly via Metav Werkzeuge or ask the consultants for application advice. M217.361 Digital universal caliper — 1000 mm carbon fibre, IP65 (Metav IndustryLine) The M217.361 Digital universal caliper is a long‑range, inductive digital caliper intended for workshop measurement of large components and assemblies, offering a balance of reach and handling for fixture, housing and heavy‑duty machining tasks. 1000 mm carbon fibre beam IP65 protection for dusty and wet environments Inductive measuring system for stable readings Replaceable jaw and spring-mounted thumb roller Large‑range measurement with manageable handling The long‑beam design provides a measuring range of 0–1000 mm, which places this instrument among large‑range workshop calipers suited to components such as housings, large fixtures and medium‑sized shafts. The choice of carbon fibre for the main beam reduces thermal distortion compared with plain steels while keeping the device relatively easy to manoeuvre for single‑operator measurement tasks. With a jaw length of 100 mm and an inductive slide mechanism, the instrument combines reach with the stiffness required to preserve measurement repeatability across the full stroke. Consistent digital output and practical operation An inductive measuring system and a digital display with mm/inch, Hold, Set, On/Off, 0/Inch and Data keys deliver fast, unambiguous readouts and allow integration into data workflows via the RB 6 data output. The display resolution is 0.01 mm, enabling routine workshop tolerancing and fast checks; the specified accuracy of ±0.07 mm gives an objective basis for process control decisions when assessing larger parts where absolute micrometre precision is not required but reproducibility is crucial. Power is supplied by a 3 V CR 2032 cell, ensuring stable operation for extended inspection sessions. Practical features for everyday workshop use Durability and serviceability are emphasised by the replaceable measuring jaw and a spring‑mounted thumb roller, which simplify maintenance and prolong service life in busy environments. The IP65 rating protects the measuring electronics against dust ingress and water jets, reducing downtime and cleaning interventions in harsher production areas. Together these characteristics support efficient inspection routines and lower the total cost of ownership by limiting service interruptions and simplifying component replacement. Clear advantages for production and quality tasks As a long‑range digital caliper with a carbon‑fibre beam and inductive sensing, the instrument is particularly suited to applications where a wide measuring span and reliable digital output matter more than sub‑micrometre resolution. Typical use cases include bench and fixture inspection, outer and inner diameter checks on larger parts, and stage‑level verification during assembly. The combination of repeatable digital readings and rugged protection helps to streamline quality documentation and traceability within standard workshop processes. For tailored advice on integrating the M217.361 into production or inspection setups, contact Metav Werkzeuge for expert support and prompt dispatch from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M217.361 GTIN: 4054469183213 Brand: Metav IndustryLine Core technical data Measuring range: 0–1000 mm Resolution: 0.01 mm Accuracy: ±0.07 mm IP protection: IP65 Jaw length: 100 mm Battery: 3 V CR 2032 Special features Material: Carbon fibre Measuring system: inductive Display functions: mm/inch, Hold, Set, On/Off, 0/Inch, Data Replaceable jaw and spring-mounted thumb roller Data output: RB 6 Digital caliper FAQ What measuring range does the caliper cover? The measuring range is 0–1000 mm, making the instrument suitable for larger workshop components and assemblies. How accurate are the readings from this caliper? The caliper provides readings with an accuracy of ±0.07 mm and a resolution of 0.01 mm, appropriate for large‑format workshop inspection where reproducibility is essential. Which data interface is available for digital collection? Data is provided via an RB 6 output, allowing the caliper to feed measurement values into compatible data capture systems. Is the instrument protected against workshop conditions? Yes — the instrument carries an IP65 rating for resistance to dust and water jets, and its carbon‑fibre beam reduces thermal effects compared with conventional steel beams. Are any user‑replaceable parts included for maintenance? The design includes a replaceable measuring jaw and a spring‑mounted thumb roller to simplify routine maintenance and extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining 0.02 mm accuracy with IP54 protection and an absolute measuring system provides dependable workshop measurements and consistent quality control; order the instrument directly via Metav Werkzeuge or request advice from our consultants. Digital Caliper 150 mm, IP54 (DIN 862) — Metav IndustryLine The Digital Caliper 150 mm, IP54 (DIN 862) is a compact, workshop-ready absolute caliper for precise external, internal, depth and step measurements in standard machining environments. IP54 protection for dusty and damp environments Absolute measuring system with 0.02 mm accuracy Stainless steel construction with glass scale RB 6 data output for digital integration Robust accuracy for everyday metrology This caliper delivers 0.02 mm accuracy on an absolute measuring system, a combination that gives reliable, repeatable readings across routine inspection tasks. The stainless steel body with a glass scale resists wear while maintaining stable guidance, so measurements remain consistent over time. Built to the DIN 862 standard, the instrument suits general metalworking and maintenance use where a balance of reach and stiffness is required. Clear digital readout and data connectivity The instrument features a digital display with on/off, 0/ABS, mm/inch and Origin controls for intuitive operation. A RB 6 data output permits straightforward connection to data loggers or inspection software, enabling traceable records and faster quality workflows. The display resolution and measurement logic reduce interpretation errors, which speeds up checking procedures and supports process documentation in production environments. Four measurement modes and practical handling Equipped for four-fold measurement (external, internal, depth and step), the caliper replaces several single-purpose gauges, saving bench space and simplifying inspection sequences. The compact 150 mm format is classified in the standard range for workshop calipers, offering an optimal compromise between reach and rigidity that enhances single-hand handling and repeatable results for typical machine‑shop components. Durable protection and transport convenience With IP54 ingress protection and delivery in a protective case, the device withstands workshop conditions and is safer to store and transport between job sites. The lightweight construction (approx. 0.4 kg) and secure jaws reduce operator fatigue during repeated checks, while the battery-powered electronics (3 V CR2032) keep downtime to a minimum. For workshop-ready precision with robust protection, request the Metav IndustryLine Digital Caliper M216.255 from Metav Werkzeuge GmbH or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 for specification support Technical Data Article number: M216.255 GTIN: 4054469182551 Eclass: 21170344 Norm: DIN 862 Facts Measuring range: 0–150 mm Resolution / display: 0.02 mm Accuracy: ±0.02 mm Weight: 0.4 kg Battery: 3 V CR 2032 Protection class: IP54 Special features Material: stainless steel with glass scale Measuring system: Absolute Measurement modes: external, internal, depth, step Data output: RB 6 Digital display functions: ON/OFF, 0/ABS, mm/inch, Origin button Delivered in protective case for transport FAQ Is the caliper suitable for workshop environments with splash and dust? The Digital Caliper 150 mm meets IP54 and is designed for dusty and damp workshop conditions, providing protected operation without compromising accuracy. Can measurement data be exported to inspection software? Yes. The instrument includes a RB 6 data output for direct connection to data loggers or PC systems to streamline record keeping. Which measurement types are possible with this caliper? This caliper supports four measurement tasks: external, internal, depth and step measurements, covering most routine inspection needs. What is the display resolution and typical accuracy? The digital readout displays at 0.02 mm resolution, with an accuracy of ±0.02 mm, suitable for standard machine‑shop quality control. Is the caliper supplied ready for transport and storage? The tool is supplied in a protective case for safe transport and workshop storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, robust and ready for integration: the caliper combines 0.01 mm resolution, a hardened stainless steel construction and an RS232C data interface for reliable shop-floor measurement and simple data logging. Order the digital pocket caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital pocket caliper »Digital‑Taschen‑Messschieber, schwarz« — pocket caliper with RS232 data output A Digital pocket caliper, black, designed for portable precision measuring across workshop and inspection tasks, combining compact format with a clear display and data connectivity. Compact pocket format for mobile measuring 0.01 mm resolution for standard workshop control RS232C output for data logging and traceability Delivered in a transport box for safe storage Precision and portability for routine measurement tasks The compact digital caliper is built to bring reliable, repeatable results to everyday workshop measurement. With a resolution of 0.01 mm and a clear display with 12 mm digit height, read‑outs are quick and unambiguous — reducing reading errors during repetitive checks. The caliper’s hardened stainless steel jaws and beam resist wear and provide mechanical stability; this material choice supports long term dimensional stability and helps maintain calibration intervals. The lightweight design (approx. 0.3 kg) and pocket format make the tool suitable for mobile inspections where access and handling matter. Seamless documentation and integration for quality processes Equipped with an RS232C (RB2) data output, the instrument enables direct transfer of measurement values to data collection systems or inspection software. This connectivity supports quality processes that require traceable records or statistical process control, reducing manual transcription and associated errors. The display features mm/inch toggle and dedicated zero and on/off controls, streamlining measurement workflows and allowing swift switching between unit systems without extra calculation. Versatile measuring functions for common workshop needs This pocket caliper performs four fundamental measurement modes — external, internal, depth and step measurements — so it covers the typical checks required in metalworking and assembly. The combination of a compact jaw geometry and hardened contact surfaces allows access to small features while retaining repeatability. For routine parts inspection and quick setup checks, the instrument provides a practical balance of reach and manoeuvrability. Practical protection and workshop readiness The device is supplied in a transport box for protection during storage and transit, helping prevent knocks and contamination that could affect accuracy. The robust surfaces and compact form factor reduce susceptibility to damage when carried in pockets or toolkits, and the easy‑to-read digits speed up inspection cycles. Where traceability is required, data logging via RS232C simplifies the creation of measurement records without additional adapters. For tailored advice and immediate availability, contact Metav Werkzeuge in Emmerich — Metav’s specialists can confirm stock, compatibility with inspection systems and ordering options for this Metav IndustryLine caliper (SKU M216.086) — call +49 2822 7131930 or email info@metav-werkzeuge.com. Technical data SKU: M216.086 GTIN: 4061905082559 Manufacturer: Metav IndustryLine Facts Resolution: 0.01 mm Display digit height: 12 mm Weight: 0.3 kg Data output: RS232C (RB2) Special features Material: hardened stainless steel Measuring modes: external, internal, depth, step (4‑way measurement) Display functions: on/off, zero, mm/inch Delivery: transport box (plastic or wooden box) FAQ How accurate is the measurement from this digital pocket caliper? The caliper offers a resolution of 0.01 mm, suitable for standard workshop control and routine inspection tasks; accuracy depends on application and handling. Can measurement values be exported directly to a computer? Yes — the unit has an RS232C (RB2) data output for direct transfer of readings to compatible data collection systems. Which measurement types are supported by this caliper? The instrument supports four measurement types: external, internal, depth and step measurements, making it versatile for general workshop use. Is the caliper protected for transport? The caliper is supplied in a transport box to protect the instrument during storage and transit. What material are the jaws and beam made from? The caliper is manufactured from hardened stainless steel, chosen for wear resistance and stability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Reliable measurement in everyday workshop and inspection routines is ensured by the combination of a hardened stainless steel frame, a ceramic measuring insert and an easy preset function for repeatable results; the M2.5 threaded bore for exchangeable heads increases application flexibility. Order directly via Metav Werkzeuge or consult our product specialists for suitability and delivery options. Digital-Uni-MS 200 mm x 80 mm — digital caliper with ceramic insert and preset (Metav IndustryLine) Digital-Uni-MS 200 mm x 80 mm is a compact digital caliper designed for precise internal and external measurements in workshop and quality-control environments Hardened stainless steel construction Ceramic insert for increased wear resistance Digital display with ON/OFF and SET/PRESET controls RB 5 data output for integration and traceability Precision that suits everyday industrial use The instrument addresses the universal workshop requirement for repeatable, verifiable measurements within the Standard range of 0–200 mm, combining practical reach with torsional stiffness. With a display resolution of 0.01 mm and a stated accuracy of ±0.05 mm, the caliper delivers reliable numeric results for machining, assembly and inspection tasks where traceable, comparable values matter. The preset function simplifies repetitive checks by storing a reference position, reducing operator-induced scatter and supporting faster quality-control cycles. The digital readout with dedicated ON/OFF and SET/PRESET keys is designed for clear operation even in busy environments. Robust construction and flexible measuring options Built from hardened stainless steel with a metal housing and fitted with a ceramic insert, the tool resists wear and maintains measuring integrity over long service life; the ceramic contact reduces surface abrasion on delicate or plated parts. Versatility is extended by an integrated M2.5 threaded bore, which accepts exchangeable measuring inserts for special tasks; two 2 mm ball measuring heads are included to support shaft and bore checks out of the box. The 80 mm jaw length provides practical reach on typical components while keeping the instrument easy to handle; net weight of 0.4 kg ensures comfortable one‑hand use with minimal fatigue. Data handling, workflow benefits and traceability Data output via RB 5 permits straightforward transfer of measured values into inspection software or data collectors, improving documentation and reducing transcription errors in quality records. Delivery in a secure transport case protects the caliper during storage and dispatch and supports safe handling between workshop and inspection bench. The combination of robust mechanical design, a wear-resistant contact insert and digital connectivity reduces rework and speeds up inspection loops, delivering measurable efficiency gains across production and service operations. Metav’s distribution and quality filter in Emmerich ensure consistent availability and product reliability. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich to discuss this digital caliper’s suitability and availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M240.206.N GTIN: 4054469160009 Brand: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Jaw length: 80 mm Weight: 0.4 kg Supply: 3 V Tariff number: 90173000 Special features Material: hardened stainless steel, metal housing Ceramic measuring insert M2.5 threaded bore for exchangeable measuring inserts Includes two 2 mm ball measuring heads Digital display with ON/OFF and SET/PRESET Data output: RB 5 Delivery in transport case (plastic/wooden) Factory standard: Werksnorm FAQ What measuring range and classification does this caliper cover? The caliper covers a measuring range of 0–200 mm and is classified in the Standard category, offering the best balance of reach and stiffness for general machine‑shop and inspection tasks. How precise and repeatable are the readings? Readout resolution is 0.01 mm with a stated accuracy of ±0.05 mm; the preset function supports repeatable checks and reduces variance from manual setting. Can the caliper be used for both internal and external measurements? Yes, the design supports internal and external measurements and includes two 2 mm ball measuring heads for specialised internal or shaft checks. Are there options for specialised measuring contacts? The instrument features an M2.5 threaded bore for exchangeable measuring inserts, enabling tailored contacts to suit particular workpieces and inspection routines. How can measurement data be exported for documentation? Values can be transmitted via the RB 5 data output to compatible data collectors or inspection software for traceable recording. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine carbide measuring faces with IP67 protection for reliable, repeatable measurements on the production floor; the hardened stainless‑steel construction adds long service life. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper M216.159.N — 200 mm, carbide jaws, IP67 The Digital caliper M216.159.N is a 200 mm workshop caliper for general machine‑shop inspection and production control, equipped with carbide measuring faces and a square depth gauge for robust multi‑purpose use. Robust IP67 protection Carbide measuring jaws 200 mm measuring range 0.01 mm digital resolution Four‑function measurement capability Precision and repeatability that supports production control The instrument delivers a 0.01 mm display resolution and an accuracy of ±0.03 mm, making it suitable for standard quality control tasks in metalworking and mechanical assembly. Constructed from hardened stainless steel, the gauge maintains dimensional stability under everyday workshop stresses and complies with DIN 862, the established benchmark for caliper metrology. These specifications translate into predictable measurement results that reduce rework and speed up inspection cycles, so production planning and batch release can proceed with confidence. Built to withstand shop‑floor conditions and reduce downtime With IP67 sealing and carbide jaws, the caliper resists coolant, chips and light immersion, allowing measurement close to the machining centre without sacrificing tool life. The digital display with MODE and SET keys enables quick unit changes and zeroing, while the instrument’s robust build reduces the frequency of replacements. The result is a pragmatic balance of durability and handling efficiency that keeps measurement routines flowing and lowers the total cost of ownership for inspection tools. Practical measurement range and versatile functions for everyday workshops Classified in the Standard range (measuring span up to 300 mm), the device offers the familiar reach expected in machine shops while remaining easy to handle for single‑operator use. The square depth gauge (3.7 × 1.3 mm) and a 50 mm beak length extend measurement versatility to narrow grooves and stepped components. Thanks to the four‑function measurement setup, the caliper covers inside, outside, depth and step measurements without attachment changes, reducing cycle time and limiting operator handling errors. Clear numerical data and easy integration into workflows Numeric details are straightforward: a 0–200 mm measuring range, 0.01 mm display resolution, and ±0.03 mm stated accuracy. The instrument’s weight (0.5 kg) and robust construction make it a familiar, ergonomic tool for repeated use. The combination of these measurable values helps procurement and quality teams compare instruments objectively and select the solution that fits their tolerance budgets and handling preferences. Choose the Metav IndustryLine digital caliper for dependable IP67 performance and carbide durability, and contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M216.159.N GTIN: 4054469178882 Tariff code: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 0.5 kg Depth gauge: 3.7 × 1.3 mm Beak length: 50 mm Special features IP67 protection Hardened stainless steel body Carbide measuring faces Digital display with MODE and SET keys Four‑function measurement (inside, outside, depth, step) Complies with DIN 862 eCl@ss: 21170344 FAQ What accuracy can be expected for routine checks with this caliper? The M216.159.N provides a stated accuracy of ±0.03 mm, which suits standard workshop inspection and quality control tasks in line with DIN 862. Can the caliper be used on the shop floor near coolant and chips? Yes. The IP67 rating and durable construction allow operation close to machining processes where liquid exposure and particulate contamination occur. Which measurement tasks does the instrument cover? The caliper supports four‑function measurement: external, internal, depth and step measurements are all possible without additional attachments. Are the measuring faces wear‑resistant for long‑term use? The device features carbide measuring faces, chosen for their abrasion resistance and longevity in contact with harder materials. Is this instrument suitable for calibration and traceable inspections? The caliper meets DIN 862 requirements; for traceable calibration options and certificates, please consult Metav Werkzeuge for available calibration services and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a balanced combination of 250 mm measuring range, hardened stainless steel construction and a clear digital display for consistent shop-floor throughput; order or request tailored advice via Metav Werkzeuge. Metav IndustryLine digital caliper M240.057 — 250 mm, flat gripping tips The Metav IndustryLine digital caliper M240.057 is a 250 mm range caliper designed for routine dimensional control in machines shops and fabrication environments, offering flat gripping tips for reliable contact on small and awkwardly shaped workpieces 250 mm measuring range for workshop use Hardened stainless steel construction, metal housing Digital display with On/Off, Zero, Unit, Hold Flat jaws 75/55 mm ideal for tight geometries Dependable everyday performance that reduces rework The instrument is classified as a Standard range caliper for general machine‑shop tasks and combines reach with rigidity: the 250 mm span gives access to typical components while the compact jaw geometry preserves stiffness. With a display resolution of 0.01 mm and a declared accuracy of ±0.04 mm, the device is suited to workshop quality control where reproducible results matter. The relatively light weight and balanced proportions make repeated checks less tiring and help maintain cycle times on production lines. Fast measurement capture and straightforward data handling A clear digital display provides immediate read‑out and the keypad offers On/Off, Zero, Unit and Hold functions for quick adaptation to different measuring routines. The caliper includes an RB 5 data output interface to feed recorded values into inspection software or a portable data logger, accelerating documentation and reducing transcription errors. Powered by a 3 V cell, the unit supports uninterrupted shifts with simple battery replacement, improving measurement throughput in repetitive tasks. Robust materials for repeatable accuracy Constructed from hardened stainless steel with a protective metal housing, the instrument resists everyday abrasion and maintains dimensional stability under shop conditions. Flat measuring tips of 75 mm (lower) and 55 mm (upper) ensure dependable contact on flats and shoulders, while the corrosion‑resistant surfaces reduce maintenance. The build quality supports stable calibration intervals and helps retain measurement certainty over time, which is vital for components that enter assembly or further machining. Practical features for common workshop operations Designed for internal measurements from 10 mm and general external checks, the caliper integrates into standard inspection routines without requiring elaborate setup. The combination of flat gripping tips and the compact display layout makes it easier to measure stepped geometries and shallow bores that are awkward for larger instruments. The balance of reach, resolution and robustness makes this a pragmatic choice for maintenance teams, toolrooms and production inspectors who prioritise speed and repeatability. Contact Metav Werkzeuge for application advice, detailed specifications or to discuss how the Metav IndustryLine digital caliper M240.057 fits existing inspection routines in your workshop. Technical data Article number: M240.057 GTIN: 4054469182292 Brand: Metav IndustryLine eClass: 21170344 Facts Measuring range: 0–250 mm Resolution: 0.01 mm Declared accuracy: ±0.04 mm Weight: 0.5 kg Lower jaw length: 75 mm Upper jaw length: 55 mm Power supply: 3 V battery Special features Material: hardened stainless steel, metal housing Digital display with On/Off, Zero, Unit, Hold buttons Data output: RB 5 interface Suitable for internal measurements from 10 mm FAQ What measurement range does this caliper cover? The Metav IndustryLine digital caliper M240.057 covers a measuring span of 0–250 mm, making it suitable for standard workshop and machine‑shop tasks. What resolution and accuracy can be expected? Resolution is 0.01 mm and the declared accuracy is ±0.04 mm for the Metav IndustryLine digital caliper M240.057, which supports reliable routine checks. Is the caliper suitable for internal measurements of small bores? The caliper is specified as suitable for internal measurements from 10 mm upwards; measurements below this size are not recommended with this model. Does the instrument support data transfer to inspection systems? Yes, the caliper offers an RB 5 data output interface to export measured values into compatible inspection software or data loggers. What materials and finishes are used in the construction? The device is made from hardened stainless steel with a metal housing, providing corrosion resistance and mechanical stability for repeated shop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, rigid 300 mm mounting solution with a 16×2.5 mm profile and minimal mass for fast alignment and repeatable angle referencing; order the rail directly via Metav Werkzeuge or consult our technical advisors if further specification is required 300 mm rail for TOP universal angle measuring device — 16×2.5 mm profile The 300 mm rail for TOP universal angle measuring device is a compact mounting rail designed to provide a stable reference for angle measurement and fixturing in metrology and workshop environments 300 mm precision mounting rail 16 × 2.5 mm cross-section profile Lightweight: 0.1 kg for easy handling Compatible with TOP universal angle devices Stable reference for repeatable angle measurements The rail serves as a rigid reference that reduces alignment variation during repetitive angle checks. With a nominal length of 300 mm and a slim 16×2.5 mm profile, the component balances reach and stiffness to deliver consistent mechanical positioning in tight setups. This stability is advantageous where reproducible readings are required across batches or when establishing a fixed datum in inspection jigs. The combination of profile geometry and low mass supports fast handling without sacrificing the repeatability expected in production metrology. Compact profile for integration into fixtures and test benches The narrow profile of the rail allows it to be integrated into existing test benches, height gauges or dedicated angle fixtures without demanding extra space. Its 16×2.5 mm cross-section is especially useful when installation space is limited but a secure mounting surface is still necessary. The design simplifies retrofitting tasks and reduces the need for custom adapters, making the component a pragmatic choice for laboratories and small-series production where flexibility is essential. Low weight for quick set-up and handling Weighing only 0.1 kg, the rail is easy to manoeuvre during assembly and inspection routines. The low mass reduces operator fatigue when repeated repositioning is required and shortens the time needed to reconfigure setups between jobs. In practical terms, the lightweight nature of the component contributes directly to improved throughput in workshop workflows, as handling times and clamping adjustments are reduced. Designed for straightforward compatibility with angle units The rail is specified for use with TOP universal angle measuring devices, ensuring mechanical compatibility with that product family. This compatibility means fewer alignment complications at the interface and a predictable fit when replacing or upgrading existing measurement components. For applications that demand a reliable mechanical coupling to the measuring head, the rail provides a clear, purpose-built mounting surface. Supplied without packaging for economical logistics Delivered without packaging, the component reduces bulk and waste when integrated into larger shipments or production kits. This format is particularly suited to OEM assembly lines and refurbishment environments where the rail is incorporated directly into a toolset or calibration fixture. The delivery format streamlines storage and handling when items are being kitted for on-site installation or factory modification. Practical advantages for inspection and small-batch production As a compact mounting element, the rail supports faster setup, simpler alignment and consistent positioning across inspection cycles. Its combination of 300 mm length, precise profile and negligible weight makes it a practical accessory for workshops, calibration benches and quality control stations that require dependable mechanical references without extensive modification to existing equipment. Contact Metav Werkzeuge for advice on integrating this 300 mm rail into existing measurement rigs or to discuss compatible TOP angle devices — Metav Werkzeuge can provide technical guidance from Emmerich and supply the article directly Technical data Article number: M214.098.3 GTIN: 4061905053627 Brand: Metav IndustryLine Label: 300 mm Schiene für TOP-Univ.-Winkelmessgerät ohne Verpackung Facts Length: 300 mm Cross-section: 16×2.5 mm Weight: 0.1 kg Special features Supplied without packaging Compatible with TOP universal angle measuring devices Compact profile for fixture integration FAQ What is the exact length and profile of the rail? The rail measures 300 mm in length and features a 16×2.5 mm cross-section; reference the article number M214.098.3 for ordering. Is the rail delivered packaged? No, the item is supplied without packaging, which is suitable for kit assembly or direct integration into production shipments. Which measuring units does this rail suit? The rail is designed for mechanical compatibility with TOP universal angle measuring devices and related mounting setups. Can the rail be used as a reference in inspection fixtures? Yes, the rail provides a stable, repeatable mechanical reference that can be incorporated into inspection jigs and calibration benches. How heavy is the component and what does that mean for handling? At 0.1 kg, the rail is lightweight and easy to handle, enabling quick repositioning and faster set-up times across small-batch or repetitive tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of durable carbide tips and straightforward compatibility with the 201.274–201.277 series provides reliable, repeatable scribing for workshop layout tasks; the robust design minimises downtime and simplifies maintenance. Order replacements via Metav Werkzeuge or consult our advisors for technical clarification. Replacement Scribing Tips M201.274.A — Pair with Carbide Points (Metav IndustryLine) Replacement Scribing Tips M201.274.A designed for precision marking and layout work in mechanical workshops and maintenance departments Durable carbide marking tips for long service life Compatible with 201.274–201.277 series fittings Robust construction for repeatable scribing results Precision and longevity for everyday marking The set of carbide tips is engineered to deliver consistent line quality over extended use, making it suitable for recurring layout and scribing operations. The hard-wearing point material retains sharpness, reducing the frequency of replacement and ensuring repeatable marks on hardened surfaces. This lowers rework and contributes to a steadier production flow, particularly where accuracy in transfer and reference lines is essential. Fast replacement, reduced downtime Designed for swift installation on the matching fittings, the replacement tips allow maintenance teams to restore full functionality quickly. The compact package (gross weight approx. 0.2 kg) keeps stock management simple and the minimal handling required reduces the risk of alignment errors during changeover. Compatibility with the 201.274–201.277 range ensures spare-part standardisation and fewer different spare items to carry in the workshop. Practical fit for workshop layout and measuring fixtures These scribing points are a pragmatic accessory where precision marking supports assembly, machining and inspection tasks. The robust design resists deformation under normal scribing forces and maintains a reliable centre point for repetitive work. Metav IndustryLine supplies this spare part as part of a broader commitment to accessible, professional measurement solutions, backed by warehouse distribution in Emmerich for dependable supply. For reliable, workshop-ready replacement scribing tips from Metav IndustryLine, contact Metav Werkzeuge for ordering and compatibility advice; Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.274.A GTIN: 4054469182759 Manufacturer: Metav IndustryLine Key figures Weight: 0.2 kg Features Pair with carbide tips Compatible with models 201.274–201.277 Category: Calipers (measuring instruments) FAQ What materials are these tips suitable for marking? The replacement tips are carbide-tipped for durability and are intended for standard workshop marking tasks; they produce reliable scribe marks on common metalwork during layout operations with the compatible fixtures. Can these tips be fitted to other model ranges? Compatibility is specified for the 201.274–201.277 series; fitting to other ranges is not guaranteed and should be verified against the relevant fixture dimensions before purchase. How often should the carbide points be replaced? Replacement frequency depends on usage intensity and the materials marked; the carbide construction is intended to extend service life compared with softer points, reducing replacement intervals in regular workshop use. Is the product supplied as a calibrated measuring instrument? This item is an accessory (scribing tips) and is supplied as a replacement part; it does not constitute a calibrated measuring instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com