40mm Groove Measuring Insert Flat Measuring Face 8×4×0.5mm For Digital Uni Caliper Series 240.201–240.204 - Metav IndustryLine

Take advantage of a compact, workshop-ready measuring instrument that combines a 300 mm measuring range, 0.01 mm resolution and a robust stainless‑steel build for reliable everyday inspection; order directly via Metav Werkzeuge or consult our specialists for application advice. Digital Uni Caliper M240.202.N — 300 mm stainless steel caliper with preset A Digital Uni Caliper M240.202.N for versatile interior, exterior, tube wall and bore‑spacing measurements in routine machine shop and quality‑control tasks 300 mm measuring range, workshop standard 0.01 mm resolution for precise readings Preset function with ON/OFF and SET buttons Hardened stainless steel with metal housing Consistent accuracy for production and inspection The caliper delivers reproducible measurements thanks to a finely tuned digital system with 0.01 mm resolution, making it suitable for standard workshop quality‑control where repeatability is required. The fixed 300 mm measuring range places it in the standard class for machine and metalworking, offering an optimal balance between reach and stiffness. The preset feature (SET/PRESET and ON/OFF) speeds up repetitive tasks by allowing a known reference to be stored, reducing cycle time during batch inspections. Practical handling and versatile measuring modes Designed for everyday use, the instrument supports interior, exterior, step and tube‑wall measurements with measuring inserts that can be mounted either on the top or bottom, increasing accessibility in confined spaces. The metal housing protects the electronics while the hardened stainless‑steel frame resists wear and keeps jaw geometry stable. A jaw length of 20 mm helps engage small features without losing stability, and the clear digital display with simple controls reduces reading errors and operator fatigue. Robust supply and workshop readiness Delivered in a practical transport case, the caliper arrives protected and ready for immediate use at the bench. The solid construction and metal casing make it suitable for industrial environments where tools are handled often; the compact form and weight (approx. 1.4 kg) make handling straightforward while preserving the stiffness needed for reproducible results. The data output interface RB 5 is provided for integration into data capture systems where traceable records are required. Efficiency and confidence in daily workflows As a digital measuring instrument built to a factory standard, it supports efficient inspection routines: the preset function reduces setup time, the robust stainless assembly reduces maintenance, and the instrument’s resolution keeps measurement uncertainty low for standard quality checks. For operations that demand consistent throughput, this caliper contributes to shorter inspection cycles and clearer pass/fail decisions. Contact Metav Werkzeuge today to specify measurement requirements and secure the Metav IndustryLine 300 mm stainless digital caliper with preset for workshop‑grade precision and reliable integration into quality processes Technical data Article number: M240.202.N GTIN: 4054469159980 EClass: 21170344 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Weight: 1.4 kg Jaw length: 20 mm Tariff number: 90173000 Special features Material: hardened stainless steel with metal housing Preset function; ON/OFF and SET/PRESET buttons Measuring inserts mountable top or bottom Supplied in transport case for protection during transport Data output: RB 5 Digital display caliper; factory standard FAQ What measuring tasks is this caliper best suited for? This Digital Uni Caliper M240.202.N is aimed at standard machine‑shop and metalworking tasks, covering interior, exterior, step and tube‑wall measurements across a 0–300 mm range. What level of precision can be expected from the instrument? The caliper offers a 0.01 mm resolution, making it suitable for routine quality control and workshop inspection where DIN‑style digital accuracy is required. Is the caliper ready for immediate use upon delivery? Yes. The instrument is supplied in a transport case and includes the digital display with preset capability; additional calibration certificates are provided only if specified by order. Can measurement data be exported for documentation? Data output is available via the RB 5 interface, allowing connection to compatible data‑collection systems for traceable records. What material is the caliper made from and how durable is it? The frame and jaws are made from hardened stainless steel with a metal housing for increased resistance to wear and harsh workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of a 500 mm measuring range and a 0.01 mm digital resolution, this caliper combines broad reach with fine readout for consistent workshop measurements; the hardened stainless‑steel construction and reversible measuring jaws (50 / 100 mm) ensure robust handling and versatile contact positions. Order the Metav IndustryLine digital universal caliper directly via Metav Werkzeuge or ask the consultants for technical advice. Metav IndustryLine Digital Universal Caliper – 500 mm, 0.01 mm readout The Metav IndustryLine digital universal caliper offers a medium‑range measuring solution for machine shops and fixture makers, combining wide reach with a fine digital display for repeatable, production‑grade measurements 500 mm measuring range 0.01 mm digital resolution Hardened stainless steel frame Reversible jaws 50/100 mm Accurate measurements across medium‑sized components With a 500 mm range and a 0.01 mm resolution, this instrument sits in the medium category suitable for larger assemblies while remaining manageable in daily use. The electronic readout provides quick, unambiguous values in metric or imperial units, reducing transcription errors and speeding up inspection loops. The instrument supports the typical measurement tasks found in general machine‑shop quality control and toolroom work, where a balance of reach and stiffness is required. Using a digital display with standard control keys allows users to switch between mm/inch and select absolute or incremental modes without complex procedures, which keeps throughput consistent in repetitive checks. Built to endure workshop conditions and provide stable contact The caliper is manufactured from hardened stainless steel and fitted with a metal housing for the electronics, which increases resistance to daily knocks, coolant exposure and shop contamination. The robust construction adds mass where it matters, improving contact stability on larger parts and reducing measurement scatter. Two measuring inserts—one shorter (50 mm) and one longer (100 mm)—are provided and can be mounted at either the top or bottom position, creating flexible jaw geometries for external, internal or depth checking without improvisation. This design helps maintain repeatability when measuring stepped features or bore distances on assemblies. Simple digital workflow and traceable data options The unit features a straightforward control set: ON/OFF, mm/inch, ABS/INC and zero/preset functionality for rapid set‑ups and relative measurements. A standard readout resolution of 0.01 mm delivers clear results for general precision tasks, while the available data interface RB 2 supports transfer to data collectors or inspection software to avoid manual logging. Integration into inspection routines shortens cycle times and reduces operator influence on records — a rational improvement that enhances both quality assurance and shop efficiency. Backed by Metav’s commitment to democratising precision, this caliper supports reliable measurement routines across industry, craft and distribution channels. Contact Metav Werkzeuge today for a tailored quotation or a technical clarification on the Metav IndustryLine 500 mm digital universal caliper (M240.203) Technical data Article number: M240.203 GTIN: 4054469158266 Brand: Metav IndustryLine Facts Measuring range: 0–500 mm Readout resolution: 0.01 mm Weight: 2.5 kg Jaw cross‑section: 20 x 15 mm Jaw lengths: top 50 mm, bottom 100 mm Tariff number: 90173000 Special features Material: hardened stainless steel, metal housing Digital functions: ON/OFF, mm/inch, ABS/INC, 0/PRESET Data output: RB 2 Measuring inserts can be mounted both on top and bottom FAQ What measurement accuracy can be expected from this caliper? The Metav IndustryLine digital universal caliper (M240.203) provides a display resolution of 0.01 mm; this readout level suits standard workshop and quality‑control tasks where clear, repeatable values are required. Can the unit switch between metric and imperial units? Yes. The device offers mm/inch selection via the control panel, enabling seamless switching for drawings or processes that use imperial dimensions. Are the measuring jaws suitable for internal and external measurements? The supplied jaw set includes a shorter 50 mm and a longer 100 mm insert, and the design allows mounting on either the top or bottom position to address external, internal and depth applications. Is the caliper suitable for incorporation into a digital inspection routine? Yes. The instrument features a data‑output interface RB 2, which supports connection to data collectors or inspection systems to eliminate manual entry and improve traceability. What makes this model suitable for daily industrial use? The combination of a hardened stainless‑steel frame, metal display housing and practical jaw geometry yields durability and stable contact conditions, making it well suited to regular shop‑floor usage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a long 1,000 mm range, a robust hardened stainless steel construction and an intuitive digital display for reliable measurement of large components; order the caliper directly via Metav Werkzeuge or consult our advisors for integration into existing quality processes. Digital Universal Caliper M240.204 — 1,000 mm, digital readout The Digital Universal Caliper M240.204 is a heavy‑duty 1,000 mm digital caliper engineered for workshop and fixture applications where long‑range, repeatable measurements are required. 1,000 mm measuring range Hardened stainless steel construction Digital display with mm/inch and ABS/INC RB 2 data output for process integration Long reach for large assemblies and robust repeatability The extended 1,000 mm range places this instrument in the large‑scale caliper class, intended for measurements on sizeable workpieces such as plates, housings and large fittings. The long beam design gives a favourable balance between reach and rigidity: a stiffer profile reduces deflection over length, which improves reproducibility when measuring across spans. For production environments and jigs where a single tool must cover larger geometries, this caliper provides a practical alternative to multiple short gauges. Precise digital measurement and data transfer capability Equipped with a digital display featuring mm/inch, ABS/INC and a 0/PRESET function, the instrument simplifies switching units and datum settings during inspection tasks. The reading resolution is 0.01 mm, delivering the clarity typical of standard digital calipers while the RB 2 data output enables connection to data collectors or SPC systems for traceable measurement logging. Together, these features support efficient quality workflows and reduce manual transcription errors. Durable construction tuned for workshop use The caliper is manufactured from hardened stainless steel with a protective metal housing, designed to withstand day‑to‑day workshop handling and resist corrosion. Upper and lower measuring faces are specified as 20 × 15 mm, with the upper jaw length at 50 mm and the lower jaw length at 100 mm, giving secure contact surfaces for both accessible and recessed measurements. At a weight of 2.5 kg the instrument balances solid build quality with manageable handling for single‑operator use or bench measurement tasks. Practical application: integration, inspection and workshop reliability This digital caliper is suitable for integration into metrology benches, incoming inspection and jig verification where longer measurement spans are required. The combination of a clear digital interface, robust materials and a dedicated data output supports repeatable checks and streamlined documentation. Backed by Metav’s distribution network and quality control in Emmerich, the tool is intended for industrial users seeking dependable measurement over longer lengths without sacrificing the convenience of digital readout. Order the Digital Universal Caliper M240.204 through Metav Werkzeuge for local stock availability and specification assistance—Metav Werkzeuge in Emmerich offers product advice and reliable delivery for professional measurement needs. Technical Data Article number: M240.204 GTIN: 4054469158273 Category: Messschieber Measuring range: 0–1000 mm Resolution (display): 0.01 mm Weight: 2.5 kg Jaw upper length: 50 mm Jaw lower length: 100 mm Material: hardened stainless steel Housing: metal housing Digital functions: ON/OFF, mm/inch, ABS/INC, 0/PRESET Data output: RB 2 FAQ What measurement range does this caliper cover? The Digital Universal Caliper M240.204 covers a measuring range of 0–1000 mm, making it suitable for larger components and assemblies. What level of resolution and display functions are provided? The caliper offers a display resolution of 0.01 mm and includes ON/OFF, mm/inch switching, ABS/INC and 0/PRESET functions for straightforward operation. Can measurement data be exported to a data logger or PC? Yes. The instrument is equipped with an RB 2 data output to enable connection to data collectors or SPC systems for streamlined documentation. What materials and jaw dimensions does the caliper use? The caliper is made from hardened stainless steel with a metal housing; the upper jaw length is 50 mm and the lower jaw length is 100 mm, both with a contact cross‑section of 20 × 15 mm. Is this instrument suitable for workshop and production environments? Designed with a robust build and clear digital functions, the Digital Universal Caliper M240.204 is appropriate for workshop inspection, jig verification and production quality checks where extended measuring range is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining 0.01 mm resolution, a 200 mm measuring range and a robust stainless, hardened construction, this digital caliper delivers reliable workshop inspections and consistent shop-floor results; order directly via Metav Werkzeuge or consult our technical advisors for bespoke application advice. Digital universal caliper M240.201.N — 200 mm digital caliper with preset, Metav IndustryLine Digital universal caliper M240.201.N is a compact digital caliper designed for general workshop and inspection work, enabling inside, outside, depth and step measurements with a clear preset function for repeatable checks. Stainless, hardened metal housing 200 mm measuring range Digital display with preset function Measuring inserts mountable top and bottom Dependable measurements in the standard workshop range This caliper is classified in the standard range for workshop use thanks to its 200 mm reach, striking a balance between measuring span and rigidity. The length is suitable for everyday tasks in machining and metalworking where reach and one‑hand operation matter. The solid profile and hardened construction reduce flexing during use, which supports reproducible results when inspecting components, fixtures or assemblies. The design therefore helps maintain throughput without sacrificing the core measurement quality required on the shop floor. Fast numeric readout and preset for repeatable inspection Equipped with a clear digital display and SET/PRESET control alongside an ON/OFF function, the instrument provides a 0.01 mm resolution that aligns with common digital caliper standards. This level of display resolution allows quick identification of dimensional deviations during routine checks and incoming inspection. The presence of a preset mode simplifies repetitive tasks by establishing a reference value, reducing cycle time for batch checks. A dedicated RB 5 data output enables connection to external data capture or SPC systems for documentation and traceability. Built for durability and corrosion resistance Constructed from stainless steel that has been hardened and fitted with a metal housing, the caliper resists the wear and environmental exposure typical of workshop conditions. The corrosion-resistant surfaces extend service life and reduce the frequency of replacement tools, supporting a lower total cost of ownership in production environments. The unit conforms to factory standards as specified by the manufacturer, reflecting consistent production quality and material selection geared to everyday industrial use. Versatile jaw arrangement and practical handling features The caliper’s measuring inserts can be mounted both at the top and the bottom, increasing flexibility for inside, outside and bore spacing tasks and easing access in confined geometries. A jaw length of 20 mm gives secure contact for a variety of features without compromising access to narrow slots. Powered by a 3 V system that keeps electronics simple and economical, the instrument’s balanced mass lends steady handling during measurements. Together these traits make it a practical choice for quality control benches and multi‑purpose workshop routines. For dependable, repeatable shop measurements choose the Metav IndustryLine digital caliper — contact Metav Werkzeuge in Emmerich for application guidance at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: M240.201.N GTIN: 4054469159973 Label: Digital-Uni-Messschieber 200 mm, 3 V mit Preset, INOX, Werksnorm Manufacturer: Metav IndustryLine Weight: 1.25 kg Facts Measuring range: 0–200 mm Resolution: 0.01 mm Jaw length: 20 mm Power supply: 3 V Customs tariff number: 90173000 eClass: 21170344 Special features Material: stainless steel, hardened, metal housing Digital display with ON/OFF and SET/PRESET buttons Preset function Data output: RB 5 Measuring inserts mountable top and bottom Factory standard (Werksnorm) FAQ How precise is the instrument for workshop measurements? The caliper provides a display resolution of 0.01 mm, which is typical for digital calipers used in machine shops and quality control; this makes the device suitable for routine dimensional checks and process control. What types of measurements are possible with this caliper? Inside, outside, depth and step measurements are supported, and the option to mount measuring inserts top or bottom increases accessibility for bore and wall‑thickness checks. Is the caliper suitable for regular workshop use? Yes; the stainless, hardened material and metal housing are chosen for durability under shop conditions, making the tool appropriate for daily inspection tasks. Can measurement data be exported for documentation? The unit includes an RB 5 data output that allows integration with external data capture or SPC systems, subject to interface compatibility with the receiving equipment. What does the factory standard delivery include? Delivery follows the manufacturer’s works standard and comprises the digital caliper ready for use with its preset and display functions as described. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com