150mm Clamping Jaw For TNMG 16 Inserts - Teknik Makina
Take advantage of a compact, light clamping solution that combines precise compatibility with TNMG 16 inserts and low weight for easy handling; order directly via Metav Werkzeuge or contact the consultants for application advice. Clamping wedge BK022TM — compact clamp, TNMG 16 compatibility (Teknik Makina) Clamping wedge BK022TM is a compact workholding component intended for clamping applications where TNMG 16 inserts are used, offering a lightweight option for efficient set-ups. Compatible with TNMG 16 inserts Compact clamp for tight set-ups Lightweight at 0.1 kg Teknik Cutting Tools manufacturing Accurate fit for insert tooling and steady machining The lightweight clamping solution is engineered to provide a reliable seat for indexable inserts, ensuring repeatable positioning and reduced setup time. By matching the TNMG 16 specification, the component supports standard insert geometries and helps maintain consistent cutting geometry across operations. The measured mass of 0.1 kg reduces inertia when handling and swapping fixtures, contributing to faster changeovers and improved shop-floor efficiency without compromising stability. Space-saving design for compact fixturing A compact form factor allows integration into tight toolholders and fixtures where space is at a premium. The clamp’s reduced profile supports denser tooling arrangements on turret and turret-like systems, enabling more operations per toolpost and fewer tool changes. The compactness therefore directly translates into improved throughput and simpler tool management for assemblies and small-batch production runs, while the durable construction ensures endurance under regular use. Practical handling and workshop compatibility This clamping component is suitable for standard clamping tasks in industrial environments and pairs well with typical insert-based tooling systems. The design focuses on straightforward compatibility rather than complex adapters, which simplifies inventory management and reduces the variety of spare parts required. Clear identification by SKU and manufacturer streamlines ordering and traceability in maintenance cycles, supporting reliable supply chains for production and repair. For advice on whether the BK022TM suits a specific holder or machining task, contact Metav Werkzeuge in Emmerich for technical guidance and local stock information at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: BK022TM ECLASS: 21189290 Manufacturer: Teknik Makina Core specifications Weight: 0.1 kg UID: BK022TM Special features Compatible with TNMG 16 inserts Compact clamp for tight set-ups Suitable for insert-based clamping applications FAQ What is the primary purpose of this clamping component? The BK022TM clamping wedge is intended for workholding in insert-based machining where TNMG 16 compatibility is required, providing a compact clamp solution for fixture set-ups. Is the BK022TM compatible with TNMG 16 inserts? Yes, the component is specified for use with TNMG 16 inserts and is designed to match their seating geometry for reliable positioning. How heavy is the clamping wedge? The clamping wedge BK022TM has a weight of 0.1 kg, which supports easy handling and quick tool changes. Who manufactures the BK022TM? The BK022TM is manufactured by Teknik Cutting Tools and supplied under Teknik Makina designation; ordering and responsibility are handled via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Jaw for TNMG 22 Inserts, Compatible With Precision Calipers - Teknik Makina
Take advantage of a compact, easily integrated clamping solution that combines precise compatibility with TNMG 22 standards and low handling weight for faster set-up. Order via Metav Werkzeuge or consult the team for application support. Clamping prong — compact clamping element, compatible with TNMG 22 by Teknik Makina Clamping prong for precision clamping tasks in workshop and turning tool set-ups, designed to interface with TNMG 22 insert standards. Compatible with TNMG 22 inserts Lightweight 0.1 kg for easy handling Designed for workshop clamping use Teknik Makina product Reduced set-up time through standardised compatibility A compact clamping prong that matches the widely used TNMG 22 insert designation provides a straightforward method to harmonise tool holders and turning inserts across a production line. The standard compatibility reduces the need for individual adjustments and minimises adaptor inventories, which leads to measurable time savings during tool changes. The low mass of 0.1 kg contributes to faster handling without compromising the clamping interface, and the component is suitable for integration into existing clamping assemblies where standard TNMG interfaces are employed. Compact design that supports efficient workflows The small footprint and modest weight make the component practical for busy workbenches and automated tool changers. A focus on simple geometry ensures the element can be installed and removed rapidly, improving throughput in repetitive turning or clamping tasks. Where interchangeability is required, the clear reference to TNMG 22 simplifies purchasing and stock management, while the compact form factor reduces required storage space and handling effort in the workshop environment. Consistent performance as a dependable spare part Specified and supplied by Teknik Cutting Tools, the part is intended as a reliable spare or replacement component to keep processes running. Its predictable interface characteristics support repeatable clamping behaviour, helping to avoid downtime caused by mismatched components. Delivered and filtered through Metav Werkzeuge’s European distribution, the item benefits from a quality-control approach that prioritises consistent product behaviour for industrial and trade customers. Contact Metav Werkzeuge for tailored advice on Teknik Makina clamping prongs and compatibility checks — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitment and application details Technical data SKU: BK023TM ECLASS: 21189290 Manufacturer: Teknik Makina Suitable for: TNMG 22 Weight: 0.1 kg Facts Weight: 0.1 kg ECLASS code: 21189290 Special features Compatible with TNMG 22 Product type: clamping prong UID: BK023TM FAQ What does TNMG 22 compatibility mean for workshop integration? TNMG 22 denotes a standard turning insert designation; the clamping prong (BK023TM) by Teknik Cutting Tools is specified to interface with inserts of that class, simplifying integration into existing toolholder systems. Is the clamping prong suitable as a spare for existing assemblies? Yes, the BK023TM clamping prong is intended for use as a replacement or spare part and is supplied through Metav Werkzeuge to support uninterrupted production. How heavy is the component and what handling advantages does that offer? The unit weighs 0.1 kg, which aids quick manual handling and reduces effort during frequent tool changes while maintaining the required interface geometry. Which manufacturer produces this clamping prong? The part is produced by Teknik Cutting Tools and distributed under the Teknik Makina designation; stock and despatch are managed via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Prong RDMT 16 Compatible, 0.1kg - Teknik Makina
Take advantage of a compact, precision-focused accessory that ensures secure holding for caliper-based measurements; the combination of lightweight construction and direct compatibility with RDMT 16 supports faster set-ups and consistent measurement results — order the clamping component via Metav Werkzeuge for reliable supply and expert consultation. Clamping jaw — precision accessory for RDMT 16 (Teknik Cutting Tools) A clamping jaw designed as an accessory for precision calipers, optimised for secure holding during measurement and inspection tasks. Compatible with RDMT 16 calipers Compact design, weight 0.1 kg Precision clamping interface Teknik Cutting Tools original accessory Faster, more reliable measurement through precise clamping The compact clamping jaw simplifies fixture work during inspection and routine measurement tasks by providing a stable point of contact for caliper-mounted probes and attachments. Its low mass (approx. 0.1 kg) reduces inertia during adjustments, enabling quicker alignment and fewer readjustments. This results in measurable time savings on repetitive measuring tasks and a reduced risk of slippage that can cause measurement deviations. The result is a workflow that is both efficient and consistently repeatable. Clear compatibility and straightforward installation Designed specifically for compatibility with the RDMT 16 caliper interface, the component integrates with existing caliper setups without the need for bespoke adaptors. The direct fit reduces assembly time and avoids unnecessary inventory of multiple adapter types. Installation is carried out via the caliper’s standard mounting points and the accessory’s clamping interface, providing a robust mechanical connection that supports precise alignment during inspection sequences. Practical handling and quality assurance for workshops Lightweight construction and a small footprint make the accessory suitable for bench work and mobile inspection kits. As a dedicated caliper accessory from Teknik Cutting Tools, the item supports stable measurements in confined workplaces and on-site checks where compactness matters. The design focuses on functional reliability rather than unnecessary extras, making it a pragmatic choice for toolrooms and quality departments seeking a dependable clamping solution for caliper-assisted measurement. For reliable supply of the Teknik Cutting Tools clamping jaw and expert advice on integration with RDMT 16 calipers, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for personalised support and prompt delivery Technical Data Article number: BK035TM Manufacturer: Teknik Cutting Tools SKU: BK035TM Compatible with: RDMT 16 calipers Data Weight: 0.1 kg eClass: 21189290 Special features Clamping jaw for precision measurement Precision clamping interface Compact design suitable for bench and mobile use FAQ What calipers is this accessory compatible with? The clamping jaw is compatible with RDMT 16 calipers and designed to mount directly to the caliper’s standard interface. How heavy is the clamping accessory? The accessory weighs approximately 0.1 kg, making it lightweight for mobile and bench inspection tasks. Can the clamping jaw be used with other caliper models? Compatibility is specified for RDMT 16; use with other models cannot be guaranteed without checking the respective mounting interfaces. Is this an original Teknik Cutting Tools product? Yes, the accessory is supplied as a Teknik Cutting Tools clamping component and is listed under SKU BK035TM. What does the clamping jaw improve in measurement routines? By providing a secure hold and stable point of contact, the clamping jaw reduces readjustment time and helps maintain consistent measurement alignment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Prong VNMG 16 Compatible, 0.1kg - Teknik Makina
Take advantage of a compact, workshop-friendly clamping solution that combines precision clamping with quick integration into existing turning setups; order directly via Metav Werkzeuge or consult the specialists for fitment advice. Spannpratze — clamping wedge with VNMG 16 compatibility by Teknik Makina The Spannpratze is a compact clamping wedge designed for secure holding of turning inserts and fast, repeatable set-ups in machining and workshop environments. Precision clamping for turning inserts Compatible with VNMG 16 holders Extremely lightweight at 0.1 kg Optimised for workshop and production use Faster set-ups through consistent clamping Reliable and repeatable holding is achieved by the device’s precision clamping geometry, which is configured for use with VNMG turning insert arrangements. Consistency in the clamping action reduces the need for repeated adjustments and minimises downtime during tool changes. The compatibility with the VNMG 16 standard ensures a predictable interface with many common insert holders, allowing quick replacement of worn inserts and a simplified tooling inventory. Handling is eased by the 0.1 kg mass, which supports efficient manual changeovers without excess operator fatigue. Designed to integrate with existing turning toolchains A compact clamping wedge like this is intended to fit into established toolholder systems with minimal modification. Integration is straightforward where VNMG 16 interfaces are present, so the clamping element can be introduced to standard turning operations without redesigning the toolholder. This reduces complexity in procurement and spares management while maintaining machining accuracy. The solution is therefore suited to both small workshops and production lines that demand dependable repeatability. Clear machining benefits and practical advantages By securing inserts reliably, the clamping wedge supports improved surface finish and dimensional consistency in turned parts. The mechanism focuses on holding force and positional stability; as a result, cutting parameters can be exploited more effectively and process stability is enhanced. Where traceable, repeatable clamping is required for batch work or serial production, the component contributes to lower scrap rates and fewer stoppages for rework. Technical simplicity also means shorter training time for shopfloor staff. Supply reliability and trusted sourcing from Metav Procurement from an established partner reduces the logistical risk often associated with single-item purchases. Metav acts as a quality filter for the European market and maintains a broad assortment of workshop equipment; the wider offering and the volume of regular customers provide assurance of continued availability and consistent standards. For machining operations seeking a straightforward clamping solution with rapid integration into VNMG-based toolholders, this component represents a practical choice. For procurement or technical clarification regarding the Teknik Makina clamping wedge (SKU BK021TM), contact Metav Werkzeuge for ordering and expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 — local stock and technical consultancy are available through Metav Werkzeuge Technical data Article number: BK021TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 UID: BK021TM Special features Compatibility: VNMG 16 holders Product name: Spannpratze FAQ What is the primary application of this clamping wedge? The clamping wedge is intended for securing turning inserts in common VNMG 16 holder configurations and is used where repeatable holding and quick insert changes are required. Is the clamping wedge compatible with existing VNMG toolholders? Yes, the component is specified for VNMG 16 compatibility so it integrates with holders designed to that insert standard; the SKU BK021TM from Teknik Makina matches that interface. How does the lightweight design affect workshop use? The low mass (0.1 kg) simplifies manual handling and rapid changeovers, contributing to faster set-ups and reduced operator fatigue during repetitive operations. Can this component support production-level repeatability? When mounted in a correctly specified VNMG 16 holder, the clamping wedge provides consistent clamping behaviour that supports repeatable machining results in both workshop and production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Prong With Compatibility For KNUX-R, 0.1kg - Teknik Makina
Compact, precise and ready for workshop use: the compact clamping jaw delivers stable holding with clear compatibility for KNUX‑R calipers, while the lightweight construction (approx. 0.1 kg) keeps handling effortless. Order the component directly via Metav Werkzeuge or consult our specialists for technical guidance. Clamping jaw BK028TM (Teknik Makina) — Compatible with KNUX‑R calipers, lightweight A clamping jaw designed as a practical accessory for KNUX‑R calipers, intended to provide reliable holding in measurement and small‑part handling applications. Compatible with KNUX‑R calipers Compact clamping jaw design Weighs approx. 0.1 kg Teknik Makina quality component Precise hold for repeatable measurement setups The primary advantage of this accessory is its contribution to precision in routine measuring tasks. As a specialised jaw for caliper applications, the component secures small parts during inspection and aids in repeatable positioning. The simple form factor reduces mechanical play at the contact point and therefore lowers measurement scatter; this makes it a suitable addition for workshops that require consistent results from hand‑held measuring tools. The translated function of the original designation is reflected in the accessory's role: a compact, dedicated clamping jaw that complements existing caliper workflows. Lightweight design for comfortable handling and fast tool changes At approximately 0.1 kg, the accessory is intentionally lightweight, which eases hand‑held operation and frequent changes between measuring tasks. The low mass reduces operator fatigue during repetitive inspections and simplifies alignment when working with small components. This design approach supports quicker process cycles on the shop floor while maintaining the robustness expected from a purpose‑made caliper attachment. The combination of light weight and compact geometry supports efficient throughput without compromising stability. Clear compatibility and workshop integration Compatibility information is explicit: the part is intended for use with KNUX‑R calipers, ensuring straightforward integration into measurement setups that use that model. The accessory suits a range of small‑part measurement and handling tasks common in precision engineering, maintenance and quality control environments. Its straightforward role as a clamping accessory reduces the need for improvised fixtures, helping standardise routine checks and supporting traceable inspection routines across multiple workstations. Contact Metav Werkzeuge for availability and technical advice on the Teknik Makina clamping jaw BK028TM compatible with KNUX‑R calipers — direct supply from Emmerich and tailored product guidance available Technical information Article number: BK028TM Manufacturer: Teknik Makina Compatible with: KNUX‑R calipers Weight: 0.1 kg ECLASS: 21189290 Facts Weight: 0.1 kg ECLASS: 21189290 Special features Type: clamping jaw Compatible with: KNUX‑R calipers Manufacturer: Teknik Makina FAQ What is the BK028TM intended for? The BK028TM is a clamping jaw intended as an accessory for caliper measurement tasks, providing stable holding during inspection processes. Which caliper models are supported? Compatibility is specified for KNUX‑R calipers; the Teknik Makina clamping jaw BK028TM is designed to fit that model’s jaw geometry. How much does the accessory weigh? The clamping jaw BK028TM has a weight of approximately 0.1 kg, supporting comfortable handling and frequent tool changes. Is the component suitable for precision inspection in workshops? Yes, the accessory is intended to support repeatable measurement setups and small‑part handling typical of workshop and quality control environments. What is the SKU and who is the manufacturer? The SKU is BK028TM and the component is produced by Teknik Makina Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Prong, For Precision Caliper KNUX-L - Teknik Makina
Efficient clamping for reliable caliper measurement: the compact, lightweight design and direct compatibility with KNUX-L calipers provide stable positioning and improved repeatability. Order the clamp accessory directly via Metav Werkzeuge or request specialist advice from their consultants. Clamping Prong BK030TM — Caliper clamp accessory with KNUX-L compatibility, Teknik Makina The Clamping Prong BK030TM is a compact clamp accessory designed to secure workpieces or fixtures to a caliper for precise positioning during measuring operations. Clamping prong BK030TM by Teknik Makina Compatible with KNUX-L calipers Lightweight at 0.1 kg Compact design for tight measuring setups Precise clamping to reduce measurement variation The BK030TM functions as a purpose-built clamping element that improves repeatability by stabilising the contact point during a measurement task. Fitted to the caliper interface intended for the KNUX-L, the component offers a defined clamping action that minimises movement between the measuring jaws and the workpiece. For metrology routines where consistent datum points are essential, this accessory supports accurate, repeatable readings while integrating with existing caliper setups. Low profile, minimal interference in the workflow A compact and lightweight accessory, the clamp prong has been developed to avoid obstructing access to the measured surface. Its small mass (approx. 0.1 kg) reduces additional load on the instrument, which helps preserve the caliper’s balance and tactile feel. The simple mechanical interface allows swift assembly on the intended caliper type, keeping changeover times short and supporting efficient measuring sequences without extensive recalibration. Procurement and quality assurance through a trusted partner Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component benefits from an established supply chain and a practical approach to quality control. Metav’s presence in Emmerich functions as a practical quality filter for the European market; with a broad assortment of workshop-grade products and a proven customer base, procurement is straightforward and reliable. Buyers seeking consistent measurement performance will appreciate a compact clamping solution that is supported by a supplier experienced in precision tooling. For application advice or to secure BK030TM from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich for expert consultation and next-step planning — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: BK030TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Weight: 0.1 kg Suitable for: KNUX-L calipers UID: BK030TM Special features Clamping accessory for calipers Compact design for tight measuring setups Compatible with KNUX-L FAQ What is the primary function of the clamping prong? The clamping prong secures a defined contact point on a caliper to improve stability and repeatability during measuring routines; the BK030TM is designed specifically for that role. Which calipers is this accessory compatible with? Compatibility is specified for KNUX-L calipers; the BK030TM is made to interface directly with that caliper series. Will the clamping prong affect caliper accuracy? When fitted correctly, the BK030TM helps to maintain consistent positioning and thus supports accurate, repeatable measurements rather than introducing error. Is the BK030TM suitable for tight measuring setups? Yes — the accessory is compact and lightweight (approx. 0.1 kg), making it well suited to confined measuring arrangements where space is limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Wedge DNMG 11, Precision Tooling - Teknik Makina
Benefit from a robust clamping solution that combines compact mass, clear compatibility and dependable manufacture; ideal for precise fixture tasks and straightforward integration into existing toolholding systems — order directly via Metav Werkzeuge or request consultation from the technical team. Spannpratze — Clamping jaw, compatible with DNMG 11, Teknik Makina Spannpratze is a compact clamping jaw engineered for secure fixture in machining set-ups and for integration with indexable-insert tooling systems. Compact weight 0.1 kg Compatible with DNMG 11 Teknik Makina manufacturing quality Secure clamping for consistent machining results The Spannpratze provides a secure fixture that contributes to repeatable machining outcomes. Its design focuses on maintaining stable contact between tool and holder, which supports precision in turning and finishing operations. By ensuring consistent clamping behaviour, the component helps to reduce variability in part quality and supports predictable tool performance across repeated cycles. Straightforward compatibility with DNMG 11 systems Compatibility with DNMG 11 means the clamping jaw mates with common indexable-insert assemblies used in many turning applications. DNMG designations indicate standardised insert geometry; matching the fixture to that geometry simplifies setup and minimises the need for custom adaptors. Clear compatibility reduces integration time and helps to avoid setup errors when exchanging inserts or adapting toolholders in the workshop. Lightweight handling without compromise on durability With a mass of 0.1 kg, the clamping component is easy to handle during tool changes and inspection, while remaining sufficiently robust for routine production use. The low weight assists in rapid tool swaps and lowers handling fatigue, yet the construction supports the mechanical demands of clamping. This balance between lightweight handling and reliable performance is suited to both single-station shops and higher-throughput workbenches. Simple checks and practical integration advice For reliable fitment, verify the clamping interfaces and ensure the index dimensions correspond to the insert and holder family in use. When in doubt, consult available technical datasheets or request the measured dimensions from the dealer before installation. Metav’s role as a precision partner provides an additional quality filter for European supply chains, supporting consistent availability and clear documentation for integration into existing tooling setups. For procurement or technical clarification on this Teknik Makina clamping jaw (SKU BK024TM), contact Metav Werkzeuge for tailored advice and secure supply from Emmerich — Metav’s consultants are available to assist with specification checks and order handling. Technical Data Article number: BK024TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg ECLASS: 21189290 Special features Product name: Spannpratze Suitable for: DNMG 11 FAQ What is the primary function of this clamping component? This clamping jaw is intended to provide a secure fixture for indexable-insert toolholders; the Spannpratze secures the assembly to maintain consistent machining geometry. Is the component compatible with DNMG 11 inserts? Yes — the clamping jaw is specified as compatible with DNMG 11, making it suitable for toolholders that use that insert form. What is the mass of the unit and how does that affect handling? The unit weighs 0.1 kg; this low mass facilitates rapid handling and tool changes while supporting stable clamping in standard workshop operations. Which SKU should be referenced when ordering or requesting datasheets? Reference SKU BK024TM for order placement and when requesting technical documentation for the Spannpratze. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Wedge for Indexable Inserts, Suitable for DNMG 11 - Teknik Makina
Take advantage of a compact, reliable clamping solution that combines secure fixation for DNMG 11 indexable inserts with a lightweight design for fast handling and tool changes. Order the clamping wedge directly via Metav Werkzeuge or contact the consultants for compatibility advice. Clamping wedge BK017TM – compact clamp for DNMG 11 indexable inserts by Teknik Makina Clamping wedge BK017TM is a compact clamping component intended for secure fixation of DNMG 11 indexable inserts in general turning applications, designed to integrate into standard insert-holding systems. Secure hold for DNMG 11 inserts Compact, lightweight design at 0.1 kg Precision clamping for indexable inserts Compatible with common insert holders Improved process stability through precise clamping A consistent clamping interface is fundamental for repeatable turning operations. The BK017TM clamping wedge provides secure fixation for DNMG 11 indexable inserts, reducing micro-movements that can cause chatter and poor surface finish. By ensuring a stable contact between insert and holder, the component supports precision in part geometry and contributes to reproducible machining results across multiple cycles. The design focuses on maintaining firm seat pressure while allowing straightforward insert seating and replacement. Fewer interruptions and predictable tool behaviour Stable clamping reduces the risk of unexpected insert displacement and helps to maintain cutting-edge positioning, which in turn minimises corrective rework and unscheduled stoppages. The component’s compatibility with DNMG 11 inserts and its emphasis on long service life support longer uninterrupted runs and predictable maintenance intervals. In production environments where repeatability and uptime matter, this clamping solution contributes to consistent cycle times and better overall process reliability. Easy handling and integration at the bench Weighing approximately 0.1 kg, the clamping wedge is deliberately compact for quick handling during setup and changeover procedures. The lightweight construction simplifies manual replacement and reduces handling fatigue during repetitive tool changes. Assembly into existing insert-holding setups is straightforward when DNMG 11 inserts are specified; for bespoke toolholder configurations, a short compatibility check is recommended. The component bears the manufacturing pedigree of Teknik Makina and is intended to complement standard turning tool assemblies. For technical advice or to secure the Teknik Makina clamping wedge BK017TM from stock, contact Metav Werkzeuge for order support and compatibility consultation Technical data Article number: BK017TM Manufacturer: Teknik Makina eClass: 21189290 Suitable for: DNMG 11 indexable inserts Facts Weight (kg): 0.1 SKU: BK017TM Special features Description: Clamping wedge for indexable inserts Marketing notes: good chip machining; long service life Application: turning / insert clamping FAQ Is this clamping wedge compatible with DNMG 11 inserts? The clamping wedge BK017TM is designed for use with DNMG 11 indexable inserts and secures the insert in a standard seat for turning operations. Which toolholders can accept the BK017TM clamping wedge? Compatibility depends on the holder geometry; the BK017TM is intended for common insert-holding systems that accept DNMG 11 inserts—specific holder checks are advised before retrofit. How often should the clamping wedge be inspected or replaced? Routine visual inspection for wear and secure seating is recommended; the BK017TM supports long service life, but replacement intervals depend on operating conditions and machining parameters. Who manufactures the BK017TM and where can it be ordered? The component is supplied by Teknik Makina (Teknik Cutting Tools) and can be ordered through Metav Werkzeuge; SKU BK017TM is referenced for procurement Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Clamping Wedge With CNMG 19 Compatibility - Teknik Makina
Take advantage of precise, reliable clamping that fits standard CNMG 19 inserts and keeps downtime low; the lightweight construction and simple retrofit ensure smooth integration into existing toolholders. Order direct via Metav Werkzeuge or contact the team for application advice. Clamping Jaw BK025TM — Compact clamping accessory compatible with CNMG 19 by Teknik Makina The Clamping Jaw BK025TM is a compact clamping accessory intended for secure fixation of CNMG 19 indexable inserts in turning operations, designed to integrate with standard toolholder systems and support efficient workshop workflows. Secure clamping for CNMG 19 inserts Compact and lightweight: 0.1 kg Replacement part for toolholders Suitable for industrial turning use Reliable fixation to reduce tool change delays The BK025TM delivers secure clamping for CNMG 19 indexable inserts, which helps to reduce unplanned stoppages caused by insert slippage. In practice this means fewer interruptions during turning operations and a predictable process rhythm. The term CNMG 19 denotes a common insert format in metalcutting; using a dedicated clamping component for that format ensures consistent seating and repeatable contact pressure, translating into steady surface finishes and lower tool-related scrap rates. Lightweight design for faster handling and retrofits Weighing just 0.1 kg, this clamping component is notably lightweight, simplifying manual handling during maintenance and fast retrofit into existing toolholders. The reduced mass contributes to easier tool changes without requiring additional balancing measures, so workshop technicians can perform replacements more quickly. For small-batch production or frequent insert swaps, this compact form factor supports operational efficiency while keeping toolpost loadings minimal. Straightforward integration into standard toolholder ecosystems As a purpose-built clamping accessory, the item is intended for direct integration with conventional turning setups and indexable-insert systems, enabling straightforward replacement of worn clamping parts. Specification-aligned components like this one help to standardise spare-part inventories and shorten procurement cycles. The compact construction also assists stock management, since a single SKU can serve multiple toolholder types that accept CNMG 19 inserts. For tailored advice on integrating the Teknik Makina clamping jaw into a specific toolholding system or to secure supply via Metav Werkzeuge, contact our consultants at Metav Werkzeuge for straightforward, expert assistance. Technical Data Article number: BK025TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Weight: 0.1 kg UID: BK025TM Special features Compatible with CNMG 19 inserts Clamping accessory for toolholders FAQ What insert types does this clamping component support? The BK025TM is designed for CNMG 19 indexable inserts and provides the clamping form factor required for secure seating of that insert family. Can the clamping jaw be used as a direct replacement in existing holders? In many standard toolholder systems that accept CNMG 19 inserts, the BK025TM serves as a straightforward replacement part; compatibility should be confirmed with holder geometry. Is the BK025TM suitable for frequent insert changes in small-batch production? Yes, the lightweight construction and simple retrofit properties of the BK025TM make it well suited to operations with regular insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Wedge With Compatibility WNMG 08, 0.1kg - Teknik Makina
Take advantage of secure clamping and lightweight handling to reduce tool-change time and keep turning operations running smoothly; combine reliable retention for WNMG 08 inserts with simple compatibility checks—order this accessory directly via Metav Werkzeuge or ask our consultants for tailored advice. Clamping Wedge (Spannpratze) – for WNMG 08 inserts, Teknik Makina The clamping wedge (Spannpratze) is a compact clamping accessory designed to retain WNMG 08 turning inserts securely in indexable toolholders for lathe and turning operations. Secure retention for WNMG 08 inserts Lightweight at just 0.1 kg Compatible with Teknik Makina toolholders Reduced downtime through secure insert retention The clamping wedge offers a straightforward solution for retaining WNMG 08 turning inserts, helping to prevent micro-movements that can cause chatter or premature insert wear. By ensuring a stable seating of the indexable cutting part, the accessory contributes to consistent surface finish and repeatable tool position, which in turn supports reliable cycle times and fewer unexpected stoppages. The design focuses on effective retention rather than complex assembly, so toolroom throughput is improved without additional setup overhead. Faster tool changes and easier workshop handling Thanks to its lightweight (0.1 kg) construction and compact form, the clamp accessory simplifies manual handling during tool changes. Operators benefit from quicker replacement routines and reduced physical strain when fitting or removing clamping elements on the toolpost. The simplified handling translates into shorter non-productive time between operations and a more efficient workflow on the shop floor, while the clear fit to WNMG 08 inserts makes selection and matching straightforward. Integration into existing turning systems and proven reliability As an accessory from Teknik Makina intended for turning applications, the clamping wedge integrates into established toolholding setups without demanding alterations. The product supports standard indexable insert geometry (WNMG 08), making it suitable for a range of common turning tasks in metalworking workshops. By focusing on a concise function—secure clamping—the component complements maintenance routines and tool inventories, helping to maintain machining quality over extended runs. Contact Metav Werkzeuge today to confirm fitment for existing toolholders and to discuss the Teknik Makina clamping wedge (SKU BK026TM) for reliable retention of WNMG 08 inserts. Technical Data Article number: BK026TM Manufacturer: Teknik Makina eClass: 21189290 Weight: 0.1 kg Suitable for: WNMG 08 Facts Weight (kg): 0.1 eClass code: 21189290 Special features Compatibility with WNMG 08 turning inserts Accessory for insert clamping in turning toolholders Manufacturer: Teknik Makina FAQ Is this clamping wedge suitable for WNMG 08 inserts? Yes. The clamping wedge is designed specifically for use with WNMG 08 turning inserts and secures the indexable part in compatible toolholders. Can the accessory be used with other insert types? The product is intended for WNMG 08 geometry; for different insert formats a suitability check is recommended before use. How does the lightweight design benefit workshop routines? At 0.1 kg, the accessory eases handling during tool changes, supporting quicker replacement cycles and reduced operator effort. Where can compatibility with a specific toolholder be verified? Compatibility confirmation can be arranged through Metav Werkzeuge; reference BK026TM when enquiring to ensure precise advice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Wedge With Fit For TPKN 16 - Teknik Makina
Take advantage of a compact, easily identifiable replacement that matches TPKN 16 calipers, combines practical handling with straightforward procurement and keeps workshop downtime to a minimum — order directly via Metav Werkzeuge or consult the team for matching components. Spannpratze BK036TM — Clamping prong compatible with TPKN 16 (Teknik Makina) The Spannpratze BK036TM is a compact clamping prong intended for integration with TPKN 16 calipers, suitable for workshop maintenance and component replacement tasks. Lightweight: 0.1 kg Compatible with TPKN 16 calipers SKU BK036TM for quick identification Fast integration with existing calipers for minimal downtime The clamping prong is specified for direct use with TPKN 16 calipers, enabling rapid replacement without lengthy modification. As a purpose-made component, the part reduces calibration interruptions and simplifies stock management by using a clear reference: SKU BK036TM. For procurement planning, the defined fitment eliminates guesswork and supports predictable maintenance scheduling; the tangible outcome is fewer production delays and a more efficient tool-change workflow. Compact mass for stable handling in precision tasks With a measured mass of 0.1 kg, this clamping component presents a lightweight option that is easy to position and less likely to shift system balance during handling. The reduced inertia helps in delicate procedures where small movements matter; the low mass also eases storage and transport within busy workshop environments. Specified dimensions and a clear compatibility statement assist technicians in selecting a spare that aligns with the existing measurement setup, preserving measurement consistency. Traceable sourcing and workshop-friendly logistics Traceability is supported through the SKU BK036TM and the manufacturer attribution to Teknik Makina, making reordering straightforward and error-resistant. The ECLASS reference further aids cataloguing and ERP integration for procurement teams. Relying on a clearly identified spare part supports inventory control and ensures that maintenance managers can replace components with minimal consultation, keeping operations predictable and efficient. For Teknik Makina spare parts and precise replacement advice, contact Metav Werkzeuge with SKU BK036TM for rapid assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BK036TM Manufacturer: Teknik Cutting Tools Suitable for: TPKN 16 calipers Facts Weight: 0.1 kg ECLASS: 21189290 Special features Application: clamping component SKU for reference: BK036TM Brand: Teknik Makina FAQ Which calipers is this clamping prong compatible with? The Spannpratze BK036TM is specified for compatibility with TPKN 16 calipers and is intended as a direct-fit clamping component for that series. What is the weight of the component? The clamping prong BK036TM has a listed weight of 0.1 kg, reflecting a lightweight design for easy handling. Who manufactures this clamping prong? The part is supplied by Teknik Makina (Teknik Cutting Tools) and is sold under the SKU BK036TM for unambiguous identification. How can the part be identified in ordering systems? Reference SKU BK036TM and the ECLASS code 21189290 when cataloguing or searching in procurement systems to ensure the correct clamping prong is selected. Is the Spannpratze intended as a replacement part? Yes, the Spannpratze BK036TM is designed as a replacement clamping component for workshops using TPKN 16 calipers, aiding rapid maintenance cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Clamping Wedge With Insert Compatibility DNMG 15 CNMG 12 SNMG 12 - Teknik Makina
Take advantage of precise, repeatable clamping for indexable turning inserts combined with a compact, easy-to-stock design; the result is fewer changeovers and steadier machining. For procurement or technical queries, order the BK020TM via Metav Werkzeuge or consult their specialists for application advice. Clamping prong BK020TM – compact clamp for indexable turning inserts by Teknik Cutting Tools The clamping prong BK020TM is a compact clamping component intended for securing indexable turning inserts in standard toolholders, ensuring consistent retention in workshop and production settings. Fits DNMG 15, CNMG 12 and SNMG 12 Compact clamping component, 0.1 kg For indexable turning insert holders Manufactured by Teknik Cutting Tools Faster set-up through precise clamping A well-matched clamping component directly reduces cycle interruptions. The BK020TM is designed to work with common insert types — DNMG 15, CNMG 12 and SNMG 12 — which simplifies inventory matching and shortens tool change procedures. By standardising on a single, compatible prong, toolroom managers gain more predictable results during insert changes and avoid time lost to ill-fitting clamps. The light mass of 0.1 kg contributes to easy handling without compromising retention forces required for accurate turning. Stable retention for repeatable machining outcomes Retaining the insert securely is essential for repeatable dimension and surface quality. This clamping component provides a reliable mechanical interface between the insert and the holder, improving the consistency of cutting geometry from one index to the next. For users less familiar with indexable tooling, an indexable insert is a replaceable cutting part that is mounted in a toolholder; a secure clamp keeps that part seated correctly, which helps to maintain cutting angles and minimise vibration during operation. The result is steadier machining and more consistent part quality. Compact design that simplifies stock control Small, purpose-built components reduce complexity in procurement. The slender footprint and straightforward function of this clamping prong make it simple to store and replace as part of routine maintenance. As a single SKU item, it supports streamlined ordering and reduces the number of special parts held in reserve. Supplied under Teknik Cutting Tools' designation, the component integrates with standard turning systems and promotes efficient workshop logistics without adding unnecessary variety to the tool crib. Contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply of the BK020TM clamping prong from Teknik Cutting Tools — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BK020TM Manufacturer: Teknik Makina Facts Weight (kg): 0.1 ECLASS: 21189290 Special features Suitable for DNMG 15, CNMG 12 and SNMG 12 Indexable turning insert clamping prong FAQ Which insert types does this clamping prong support? The clamping prong is compatible with DNMG 15, CNMG 12 and SNMG 12 inserts for standard turning applications. What is the mass of the BK020TM? The BK020TM has a weight of 0.1 kg. What is the intended use of this component? The component secures indexable turning inserts in toolholders to ensure correct seating and repeatable machining results. How is the item identified for ordering? Order reference is BK020TM; it is supplied by Teknik Cutting Tools and listed under that SKU. Can this prong be used across different toolholder systems? The prong is designed for holders accommodating the listed insert sizes; compatibility with specific holders should be confirmed against holder specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Clamping Wedge, Compatible with CNMG 16 - Teknik Makina
Benefit from the combination of compact compatibility with CNMG 16 and a lightweight construction that supports quick tool changes and consistent clamping. The secure design reduces setup time and helps maintain production flow — order the clamping jaw directly via Metav Werkzeuge or consult our specialists for application guidance. Clamping Jaw BK018TM — CNMG 16 compatibility, workshop-ready, Teknik Makina The Clamping Jaw BK018TM is a compact workholding component intended for turning applications where CNMG 16 inserts are used; it provides concise, reliable clamping in constrained tool setups. Compatible with CNMG 16 inserts Precision machined for reliable clamping Lightweight 0.1 kg Suitable for workshop and production use Reduced setup time through accurate insert retention The compact clamp head has been designed to secure indexable inserts with consistent repeatability, which translates into reduced setup time and fewer interruptions on the machine. Because the component is matched to the CNMG 16 geometry, the insert seats precisely and the clamping action is focused where it matters, helping to maintain cutting stability and surface quality. This targeted fit supports predictable tool behaviour in series production and one-off jobs alike, enabling smoother cycle planning and less rework. Practical handling and minimal tool overhang for safer machining A small mass of 0.1 kg keeps the tool assembly light, which eases handling during changeovers and reduces inertia at higher spindle speeds. The compact design benefits both manual tool changes and automated tool stations by limiting overhang and contributing to a better dynamic balance of the toolholder. The result is improved operator ergonomics and a lower risk of vibration-related edge wear, supporting longer insert life and steadier process results across batches. Straightforward integration and stock assurance for the shopfloor The component is manufactured under the Teknik Cutting Tools designation and supplied with the SKU BK018TM for easy identification in procurement and inventory systems. Its clear compatibility with CNMG 16 inserts simplifies parts management and replacement planning in mixed fleets. Choosing this clamping solution from a dependable distribution channel reduces downtime risk through consistent availability and a simplified spare-parts strategy, allowing production planners to focus on throughput rather than unexpected supply gaps. Contact Metav Werkzeuge for tailored advice on BK018TM from Teknik Cutting Tools and secured supply from our Emmerich facility, or request application support by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: BK018TM Manufacturer: Teknik Cutting Tools Designation: Clamping jaw eClass: 21189290 Facts Weight: 0.1 kg Special features Compatible with CNMG 16 inserts SKU: BK018TM FAQ Which insert type fits this clamping component? The clamping jaw is compatible with CNMG 16 indexable inserts and is dimensioned to match that insert geometry. Is the component suitable for production use or only for prototypes? This compact clamping solution is suitable for both workshop and production use, offering a lightweight option for frequent changeovers. How heavy is the unit and does weight matter for balance? The unit weighs 0.1 kg; the low mass helps reduce tool overhang and can improve dynamic balance in many setups. Who manufactures the clamping jaw and how is it identified? The part is produced by Teknik Cutting Tools and identified by SKU BK018TM for procurement and stock control. Does the design support straightforward stocking in spare-part inventories? Yes — the explicit compatibility with CNMG 16 and the clear SKU simplify spare-part management and replacement planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Holding Claw With Caliper Compatibility OFCR 07 - Teknik Makina
Take advantage of a compact, precision-oriented clamping solution that combines compatibility with OFCR 07, a lightweight 0.1 kg construction and robust manufacture by Teknik Makina for smooth measurement routines; order the clamping accessory directly via Metav Werkzeuge or consult the team for application advice. Clamping Jaw BK300TM — compact clamping accessory with OFCR 07 compatibility (Teknik Makina) The Clamping Jaw BK300TM is a compact accessory designed for precision calipers and small measurement setups, providing reliable holding and repeatable positioning for fine metrology tasks. Compact clamping jaw for precision calipers Compatible with OFCR 07 caliper models Lightweight at only 0.1 kg Robust manufacturing by Teknik Makina Secure, precision clamping that reduces setup variability The accessory delivers secure clamping for repeatable measurements, translating into fewer re-measures and improved process reliability. Fitted to precision calipers it ensures consistent contact and an even reference point, so measurement variance is minimised. Thanks to its explicit compatibility with OFCR 07, integration into existing inspection routines is straightforward, reducing machine downtime and speeding up cycle times while maintaining the required precision for workshop and small-scale metrology applications. Compact design for ergonomic handling and efficient workflows With a lightweight construction of 0.1 kg, the component is easy to position and manoeuvre during setup, which reduces handling time and fatigue in frequent-use environments. The compact footprint makes it suitable where bench space is limited, enabling close-proximity measurement without obstructing other tools. The small mass also lowers inertia during manual adjustments, contributing to safer and more controlled clamping actions in everyday shop-floor use. Practical choice for measurement chains and inventory planning As a simple, robust clamping accessory from Teknik Makina, the item supports standardised measurement chains and makes inventory planning more predictable. The straightforward function and limited set of technical variables means the component can be specified with confidence for repeatable tasks. Combined with Metav’s role as a quality filter for the European market, procurement teams gain access to a dependable supply channel that addresses both workshop demands and the need for consistent metrological performance. Contact Metav Werkzeuge for stock and tailored advice on the Teknik Makina clamping jaw BK300TM — expert assistance and fast availability are provided from the Emmerich site, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: BK300TM ECLASS: 21189290 Weight: 0.1 kg Brand: Teknik Makina Facts Compatibility: OFCR 07 caliper SKU: BK300TM Special features Clamping accessory for precision measurement Compact form factor Manufactured by Teknik Makina FAQ What calipers is the clamping jaw compatible with? The clamping jaw is compatible with OFCR 07 calipers; the BK300TM was specified to mate with that model for secure positioning. Is the BK300TM suitable for continuous shop-floor use? Yes, the BK300TM is designed as a robust clamping accessory suitable for routine workshop and metrology tasks where repeatable holding is required. What is the weight and how does it affect handling? The accessory weighs 0.1 kg, which makes handling and fine positioning easier and reduces user fatigue during frequent set-ups. Does the product require special tools for installation? Installation of the clamping jaw is intended to be straightforward for standard caliper fittings; the BK300TM integrates with OFCR 07 without special adapters. Which manufacturer produces this clamping accessory? Teknik Makina produces the component; the item is supplied via Metav Werkzeuge for distribution in Europe. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Spring For Indexable Inserts, Thread M6 - Teknik Makina
Take advantage of robust clamping with a precision M6 thread and durable metal construction for reliable retention of indexable inserts; purchase directly via Metav Werkzeuge or consult the team for compatibility and procurement support. Spring for indexable inserts (M6 thread) — Teknik Makina A Spring for indexable inserts engineered to secure cutting inserts in standard toolholders via an M6 thread, offering consistent retention for machining applications. M6 threaded design for standard holders Durable metal construction Ideal for indexable insert clamping Long service life and consistent retention Reliable clamping that reduces downtime The M6-threaded spring is designed for straightforward integration into standard insert holders, providing a secure clamping method that minimises insert movement during cutting. Because the component is machined with attention to metalworking standards, it contributes to consistent tool performance and fewer interruptions for retightening. For production environments where repeatability matters, this part supports stable cutting conditions and helps to keep cycle times predictable. Compatibility with common insert systems Compatibility is central to workshop efficiency. The spring is intended for use with indexable inserts and mates with holders that accept an M6 securing element. The standardised thread reduces the need for bespoke fixtures and simplifies spare-part management. Maintenance cycles and tool-change procedures can therefore be streamlined, lowering administrative overhead and allowing an emphasis on machining quality rather than parts logistics. Built to last under routine workshop loads Constructed from high-quality metalworking materials, the component emphasises durability and long service life. This reduces the frequency of replacements and supports a lower total cost of ownership in the medium term—an important consideration in production planning. The robust nature of the spring also resists common wear mechanisms in clamping applications, maintaining retention force and contributing to steady machining results over time. Practical advantages for procurement and stock control As a compact, easy-to-store item with a light mass (approx. 0.1 kg), the spring is convenient for central stocking and fast replenishment. Standardisation around the M6 thread allows buyers to rationalise inventory across multiple machines and toolholders. The clear technical specification and simple geometry also make quality checks and replacements straightforward for workshop teams and purchasing departments alike. For dependable clamping components from Teknik Cutting Tools, contact Metav Werkzeuge for procurement and technical advice — Metav Werkzeuge offers direct supply and consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BY040TM Manufacturer: Teknik Makina Suitable for: indexable inserts (thread M6) Weight: 0.1 kg ECLASS: 21189290 Facts Thread: M6 Weight (kg): 0.1 ECLASS ID: 21189290 Special features High-quality metal processing Designed for insert clamping Compatible with standard toolholders Long service life and consistent retention FAQ What is the thread size for this spring? The spring uses an M6 thread suitable for standard insert clamping applications and is listed under SKU BY040TM. Can this spring be used with all indexable insert brands? The component is designed for common toolholders that accept an M6 securing element; compatibility with specific insert systems should be confirmed against the holder design. How durable is the spring in daily workshop use? Manufactured with high-quality metalworking standards, the spring provides long service life and maintains retention force under routine machining conditions. Is the weight significant for inventory planning? At approximately 0.1 kg, the spring is compact and easy to store, supporting efficient stock management. Which manufacturer produces this part? This spring is supplied by Teknik Makina and is distributed via Metav Werkzeuge under SKU BY040TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Spring Thread M5, Compatible With Calipers - Teknik Makina
Take advantage of a compact spare part that ensures consistent tension, fits calipers with an M5 thread and keeps maintenance simple; order the replacement directly via Metav Werkzeuge or ask the consultants for compatibility support. Spring BY043TM – Caliper replacement spring with M5 thread by Teknik Makina A spring BY043TM designed as a direct replacement for precision calipers, providing reliable jaw tension where an M5 threaded mount is required Suitable for calipers with M5 thread Lightweight at 0.1 kg for easy handling Produced by Teknik Makina Reliable threaded fit for repeatable measurements The threaded connection with an M5 thread assures a secure mechanical interface for precision measuring tools. A correctly matched thread eliminates lateral play and maintains consistent tension between measuring jaws, which directly contributes to reliable measurement results. For workshops that require repeatability, a properly seated spring reduces the need for frequent recalibration and supports process stability in daily inspection routines. Compact spare that reduces downtime and storage complexity With a mass of 0.1 kg, this component is intentionally compact and easy to store as part of a spare-parts inventory. The small footprint means replacement components can be kept on hand without occupying valuable bench space, accelerating simple maintenance tasks. When a measuring instrument shows reduced jaw tension, exchanging the spring is a straightforward operation that restores functionality quickly and minimises interruption to production or inspection workflows. Practical use and straightforward maintenance for workshops Designed for straightforward replacement in calipers accepting M5 fittings, this spare part is ideal for workshop technicians and service engineers who maintain measuring equipment. The straightforward mechanical function of the part means no specialised training is required for exchange; a standard threaded removal and installation restores the original performance characteristics. Keeping such components available contributes to a robust in-house maintenance strategy and supports long-term tool reliability. For supply and spare-part advice for Teknik Makina products, contact Metav Werkzeuge for expert guidance and rapid dispatch from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 for bespoke assistance Technical data Article number: BY043TM Manufacturer: Teknik Makina Classification: eClass 21189290 Suitable for calipers: M5 thread Numbers / Core technical data Weight: 0.1 kg SKU: BY043TM Special features / Versions Replacement spring for calipers with M5 thread Compact spare-part design Intended for maintenance and repair FAQ Is this spring compatible with my caliper? Compatibility is determined by the caliper’s mounting: the spring BY043TM fits calipers that accept an M5 thread connection; confirm the thread size on the instrument before ordering. How difficult is the replacement process? Replacement is mechanical and straightforward: the threaded mounting is removed and the new spring installed using standard hand tools; the BY043TM restores jaw tension without specialised equipment. What are the dimensions or weight of the part? The spare spring has a weight of 0.1 kg; the critical compatibility parameter is the M5 thread rather than external dimensions. Who manufactures this component? This part is supplied by Teknik Makina and listed under SKU BY043TM for workshop spare-part provisioning. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U Plate Compatible With KNUX-L Precision Caliper, Steel Construction - Teknik Makina
Take advantage of precise compatibility and minimal added mass: the U-plate combines direct fit for KNUX-L precision calipers with a weight of just 0.1 kg to support stable measurement set-ups and consistent repeatability. Order the U-plate directly via Metav Werkzeuge or ask our consultants if needed U-plate — accessory for KNUX-L precision calipers by Teknik Makina The U-plate is an accessory plate for KNUX-L precision calipers, intended to provide a stable mounting surface in measurement fixtures and to simplify repeatable set-ups in workshop and inspection environments Accessory plate for KNUX-L precision calipers Minimal weight: 0.1 kg Secure fitting for workshop use Easy installation and alignment Improved measurement stability with minimal mass The accessory plate is engineered to support precision calipers in fixture applications while minimising added mass. At 0.1 kg, the plate reduces the likelihood of measurement disturbance that can occur when bulky fixtures are introduced; this contributes to consistent repeatability in serial inspections. The compact footprint means the mounting surface can be integrated into confined setups without altering the measurement geometry significantly, and the direct compatibility with KNUX-L calipers streamlines process planning for quality control routines. Quick integration into existing measuring workflows Installation is straightforward and the component is designed for a direct fit to the matching caliper interface, reducing setup time and downtime in the workshop. The plate supports efficient alignment procedures and is intended to be incorporated into measurement jigs where a stable reference plane is required. By simplifying fixture assembly, the accessory plate helps maintain production flow and allows technicians to focus on measurement outcomes rather than complex mechanical adjustments. Consistent supply and suitability for professional use Sourced from Teknik Makina, the plate aligns with professional workshop needs and is suitable where compact, purpose-designed accessories are preferred. Metav Werkzeuge provides reliable distribution and a quality filter for European customers, ensuring that small but critical items such as this accessory plate are available when required. The compact accessory supports long-term operational stability by offering a predictable and compatible mounting option for calibration and inspection tasks. Contact Metav Werkzeuge today for tailored advice on the Teknik Makina U-plate TA048TM and dependable delivery from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TA048TM Name: U-plate Manufacturer: Teknik Makina Suitable for: KNUX-L precision calipers Weight: 0.1 kg eClass: 21189290 Facts Weight: 0.1 kg eClass: 21189290 SKU: TA048TM Special features Accessory plate for precision calipers Suitable for KNUX-L Compact mounting plate design FAQ Which calipers are compatible with this plate? The U-plate TA048TM is specified for use with KNUX-L precision calipers and is designed to match the caliper’s mounting interface. Will the plate affect measurement repeatability? The U-plate TA048TM adds minimal mass (0.1 kg) and is intended to support stable set-ups, helping to preserve measurement repeatability in serial inspection tasks. Is the plate supplied ready to fit? The U-plate TA048TM is supplied as an accessory plate designed for direct fit to compatible caliper mounting points; no bespoke modification is indicated in the available product data. What material is the U-plate made from? The material is not specified in the provided product data for the U-plate TA048TM. Who manufactures the accessory plate? The accessory plate is provided by Teknik Makina (Teknik Cutting Tools) and distributed under the responsibility of Metav Werkzeuge for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm U Plate Compatible With KNUX-R Measuring Caliper, Lightweight 0.1kg - Teknik Makina
Take advantage of compatibility with KNUX-R calipers, compact dimensions and lightweight design to improve measurement consistency and speed up workshop routines; order or request technical advice via Metav Werkzeuge for reliable supply and integration. U-Plate TA046TM – U-plate accessory for precision calipers by Teknik Makina The U-Plate TA046TM is an accessory designed to provide a stable reference for precision caliper measurements, primarily intended for use in workshop and inspection settings with compatible calipers Compatible with KNUX-R precision calipers Lightweight construction, approx. 0.1 kg Robust build for workshop use Simple fitting for consistent measurements Improve measurement precision with a stable reference The accessory creates a defined contact surface that supports precise alignment of measuring jaws and reduces small position errors during repeated checks. By combining compatibility with a well-known caliper series and a compact form factor, it promotes repeatability in routine inspection tasks. The compromise between solidity and low mass ensures minimal influence on the measuring instrument while providing a clear mechanical stop. For operations where consistent results matter, this accessory helps to reduce rework and scrap by making each measurement traceable to the same physical reference. Faster set-up and a more efficient measuring routine Fitting the plate is straightforward and intended to integrate with existing workflows, shortening the time from part handling to a verified dimension. The KNUX-R compatibility means adapters or modifications are unnecessary for matching calipers, so machine operators and quality technicians can maintain throughput without extra calibration steps. The compact footprint permits use at a crowded bench or within a dedicated inspection station, contributing to a streamlined workflow and fewer interruptions during batch checks or serial inspections. Practical partner reliability for everyday workshop needs Sourcing through an established distributor ensures steady availability and consistent quality control across deliveries. The accessory suits workshops and small-scale inspection labs that require dependable tools without extensive procurement complexity. Metav’s approach to distribution acts as a quality filter for European customers, pairing practical accessories with straightforward logistics and a wide product range to reduce supplier complexity and secure continuity of supply. For integration advice or to secure stock of the TA046TM U-Plate from Teknik Makina, contact Metav Werkzeuge in Emmerich for prompt technical support and reliable delivery. Technical data Article number: TA046TM Name: U-Plate Manufacturer: Teknik Makina Suitable for: KNUX-R Facts Weight: 0.1 kg eClass: 21189290 UID: TA046TM Special features Article type: U-plate accessory Compatible with KNUX-R calipers FAQ What is the primary purpose of the U-Plate TA046TM? The U-Plate TA046TM serves as a stable reference surface to improve alignment and repeatability when taking measurements with compatible precision calipers. Is the plate compatible with KNUX-R calipers? Yes, compatibility with KNUX-R calipers is specified; the accessory is designed to fit and work with that caliper series. How heavy is the accessory? The U-Plate TA046TM has a weight of 0.1 kg, making it easy to handle and reposition on the workbench. How is the plate installed on the caliper? The plate is intended for straightforward fitting to the measuring setup used with KNUX-R calipers, enabling a consistent mechanical stop without the need for additional adapters. What maintenance is required for long-term use? Routine visual inspection and light cleaning to remove debris are usually sufficient; the accessory is intended for low-maintenance operation in workshop environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U Plate For 22 IR Caliper, Lightweight 0.1kg - Teknik Makina
Compact, lightweight and compatible with 22 IR calipers, the U plate TA063TM delivers a simple mounting solution for repeatable measurements; benefit from precise alignment, low mass (0.1 kg) and straightforward integration into existing measuring setups — order directly via Metav Werkzeuge or consult the technical team for application advice. U plate — lightweight mounting plate, compatible with 22 IR calipers (Teknik Makina) The U plate is a compact mounting accessory for precision calipers, intended to stabilise and position measuring jaws in workshop and inspection environments. Compatible with 22 IR calipers Compact, low-weight design Robust mounting for repeatable measurements Suitable for workshop and inspection use Stable mounting for consistent, measurable results A stable mounting base reduces variability in repetitive measurements. The U plate is designed to provide a fixed reference for caliper jaws, improving repeatability and reducing setup deviation in short-cycle inspections. With a nominal mass of 0.1 kg, the plate adds minimal inertia while preserving positional stability; the lightweight construction simplifies handling and repositioning during batch checks. Where traceable, repeatable readings are required, this accessory supports a controlled measuring environment and helps to maintain process quality without complex fixtures. Faster set-ups and fewer adjustment cycles Integrating a dedicated mounting plate into a measuring routine shortens alignment times and lowers the number of manual adjustments. Compatibility with 22 IR calipers ensures direct fitting to a common measuring standard, avoiding adapters or bespoke machining. The straightforward geometry of the plate means fewer setup steps, which translates into measurable time savings across repeated tasks. In practice, this leads to improved throughput in workshop inspection sequences and fewer disruptions to the production flow. Confidence through reliable sourcing and practical support Selected and supplied by an experienced partner, the U plate benefits from the manufacturer’s production standards and Metav’s role as a quality filter for the European market. Metav’s approach to democratising precision ensures access to a wide range of measuring accessories and dependable logistics from Emmerich. This combination supports long-term availability and practical service, helping to keep inspection routines predictable and resilient. For technical advice or to secure supply of the Teknik Cutting Tools U plate (TA063TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 — specialists will assist with compatibility checks and order processing. Technical data Article number: TA063TM Product name: U plate Manufacturer: Teknik Makina Weight: 0.1 kg eClass: 21189290 Compatibility: 22 IR calipers UID: TA063TM FAQ What calipers fit this mounting plate? The U plate TA063TM is designed for compatibility with 22 IR calipers and secures the measuring jaws for repeatable positioning. Is the plate suitable for regular workshop use? Yes, the mounting plate is intended as a lightweight workshop accessory for inspection and routine measuring tasks and is supplied by Teknik Cutting Tools under SKU TA063TM. How does the U plate improve measurement repeatability? By providing a stable reference and fixed mounting geometry, the U plate reduces positional variation and the need for repeated manual alignment during successive measurements. Can the U plate be integrated into existing test rigs? The U plate’s compact form and standard compatibility with 22 IR calipers make it suitable for straightforward integration into many established measuring setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U Plate For SEET 12, Mounting Accessory - Teknik Makina
Take advantage of a compact accessory that secures repeatable measurements and integrates cleanly into an existing workshop workflow; the compatibility with SEET 12 and the lightweight construction (0.1 kg) make it a practical choice for precision tasks. Order the part directly via Metav Werkzeuge or ask the consultants for specification details. U-plate TA052TM — Caliper mounting accessory with SEET 12 compatibility by Teknik Makina The U-plate TA052TM is a compact mounting accessory intended to support the SEET 12 precision caliper in workshop and inspection environments Compatible with SEET 12 calipers Compact U-plate accessory Lightweight at 0.1 kg Article number TA052TM Reliable positioning for precision measurement The compact mounting plate delivers a stable reference point for handheld or bench-mounted measuring work, ensuring repeatable readings when using compatible calipers. Designed as an accessory for the SEET 12 system, this U-plate minimises handling variation and supports consistent measurement sequences in production and quality-control routines. The low mass of 0.1 kg reduces inertial effects during repositioning, which preserves accuracy across multiple checks and short measurement cycles. Small footprint, improved process efficiency A small workshop accessory can have an outsized effect on workflow: reduced setup time and straightforward integration help maintain production throughput while safeguarding measurement integrity. The slim profile and straightforward form factor make the component suitable for cramped benches and shared inspection stations, helping to avoid clutter without compromising function. Where tool changeovers are frequent, the accessory supports faster handovers between operators and less incidental error during routine verifications. Assured supply and application guidance from a precision partner Sourcing through an established distributor provides traceability and predictable lead times. As part of the Teknik Makina range and listed under SKU TA052TM, the U-plate benefits from distribution via a partner that combines wide stock coverage with focused metrology expertise. Metav’s role as a European distribution hub offers logistical reliability and additional product context for measurement applications, supported by a large customer base and a broad product portfolio that simplifies procurement for workshops and industry alike. Contact Metav Werkzeuge for technical details and delivery options on TA052TM — Tel +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: TA052TM Designation: U-plate Manufacturer: Teknik Makina Compatible with: SEET 12 eCl@ss: 21189290 Facts Weight: 0.1 kg SKU: TA052TM Special features Suitable for precision calipers Compact accessory design Compatible with SEET 12 FAQ What is the primary purpose of the U-plate TA052TM? The U-plate TA052TM serves as a mounting accessory to provide a stable reference and improved repeatability when using the SEET 12 caliper in measurement and inspection tasks. Is the U-plate compatible with other calipers? Compatibility is specified for the SEET 12 system; the U-plate TA052TM is optimised for that caliper model and its mounting geometry. How heavy is the U-plate TA052TM? The U-plate TA052TM has a weight of 0.1 kg, which helps keep handling light and positioning stable during use. Who manufactures the U-plate TA052TM? The component is offered by Teknik Makina and listed under SKU TA052TM; distribution and further product information are available via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U Plate For WNMG 08 Inserts, Precision Fixture - Teknik Makina
Take advantage of a precise, space-saving clamping solution that reliably mates with WNMG 08 inserts while keeping tool inertia low; the combination of straightforward compatibility and compact mass ensures efficient turning operations with minimal setup time. Order directly via Metav Werkzeuge or consult the team for application advice. U plate — compact clamping plate for indexable inserts by Teknik Cutting Tools U plate is a compact clamping plate intended for secure mounting of indexable turning inserts in industrial turning applications, offering straightforward compatibility with common WNMG 08 geometries Compact U plate design Compatible with WNMG 08 inserts Lightweight: 0.1 kg Suitable for precision tool holding Precision clamping that improves machining consistency A compact clamping plate engineered for repeatable positioning reduces micro-movements at the cutting edge and helps maintain a stable cutting geometry. The plate’s low mass (approx. 0.1 kg) lowers rotating and oscillating inertia, which can improve surface finish and reduce chatter in many turning applications. Designed to accept the widely used WNMG 08 insert family, this component integrates with standard indexable tooling systems, enabling predictable tool behaviour and easier process control. Where tight tolerances matter, a stable insert mount translates directly into fewer reworks and more consistent cycle times. Faster set-up and smoother workshop workflows The simple geometry of this plate supports quick assembly into compatible holders, shortening changeover times and increasing productive machining hours. As part of a rational procurement strategy, selecting an accessory that matches existing insert standards (such as WNMG 08) avoids adaptors or bespoke fixtures and reduces inventory complexity. The modest weight and compact footprint of the plate make handling safer and faster during tool pre-setting and balancing. For organisations seeking dependable supply and consolidated sourcing, Metav Werkzeuge’s offering channels provide technical guidance and dependable logistics from the Emmerich hub. Clear compatibility guidance for practical use Intended as a component in clamping and tool-holding systems, the U plate supports established indexable insert formats and is suitable where a small, robust mounting solution is required. The item’s compatibility with WNMG 08 positioning means it is applicable across a broad range of turning operations using these inserts, from roughing to finishing passes depending on the tool geometry and cutting data chosen. Where material, coating or holder specifics influence performance, pairing this plate with the correct insert grade and holder design is recommended to achieve intended productivity gains. For precise advice on integrating this Teknik Cutting Tools U plate into existing tooling systems or for supply direct from Metav Werkzeuge’s European distribution centre, contact Metav Werkzeuge for tailored recommendations and fast delivery from Emmerich Technical Data Article number: TA020TM Description: U plate Manufacturer: Teknik Makina SKU: TA020TM Facts Weight: 0.1 kg ECLASS: 21189290 UID: TA020TM Special features Compatible with WNMG 08 inserts Compact clamping geometry Intended for indexable turning tool systems FAQ How does this plate improve insert stability? The U plate provides a compact mounting surface that reduces movement at the insert seat, improving stability for WNMG 08 inserts and supporting more consistent cutting forces and surface finish. Is the plate suitable for all WNMG 08 holders? Compatibility is intended for systems that accept standard WNMG 08 insert positioning; verify the holder geometry and clamping method to ensure a correct fit. What weight and handling characteristics does the component have? The component weighs approximately 0.1 kg, making it easy to handle during tool changes and pre-setting while contributing minimal inertia in rotating assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U Plate VCMT 16 Compatible - Teknik Makina
Take advantage of a compact, precision-oriented mounting solution that combines compatibility with the VCMT 16 caliper and a low mass of 0.1 kg for easy handling and repeatable set-ups; order supply or request advice via Metav Werkzeuge for quick clarification and reliable delivery. U-plate – compact mounting plate, compatible with VCMT 16 (Teknik Makina) The U-plate is a compact mounting plate that provides a stable locating point for precision measuring with bench or hand calipers, primarily intended for workshop measuring and fixture use. Compact mounting plate for precision measuring Compatible with VCMT 16 calipers Lightweight construction, 0.1 kg Simple integration into measuring setups Stable reference for repeatable measurements The U plate offers a concise and rational solution where consistent reference positioning matters. By matching the geometry required for the VCMT 16 caliper, the plate reduces setup variations and shortens cycle time for routine checks. Its low weight of 0.1 kg supports fast handling without compromising positional consistency, which helps maintain throughput in measuring routines. The clear functional purpose—serving as a repeatable datum—translates into fewer adjustment steps and a more efficient workflow. Practical advantages in everyday workshop use Compactness and straightforward integration are the primary operational benefits. The mounting plate’s small footprint permits placement directly at a bench or within measuring jigs, saving space while enabling quicker part inspection. Where frequent tool changes occur, the plate’s form factor allows simple repositioning and storage. Compatibility with established caliper types simplifies procurement and reduces the need for custom adaptors, supporting a pragmatic approach to workshop organisation and inventory consolidation. Integration into a quality-focussed supply chain Sourcing the plate from a recognised maker such as Teknik Makina supports consistent manufacturing tolerances and traceability. The product’s SKU TA032TM ensures unambiguous identification within procurement processes. For companies aiming to centralise precision equipment, a standardised small part like this mounting plate assists in harmonising measuring set-ups and reduces the risk of measurement variation across different workstations. The result is a measurable improvement in process reliability and easier documentation for quality records. For supply and technical advice on the Teknik Makina U-plate (TA032TM), contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt, reliable fulfilment. Technical data Article number / SKU: TA032TM Name: U plate Manufacturer: Teknik Makina Suitable for caliper: VCMT 16 Weight: 0.1 kg eClass: 21189290 Facts Weight: 0.1 kg eClass: 21189290 Special features Compatible with VCMT 16 calipers Compact U-shaped plate design Lightweight, easy to position FAQ What is the primary purpose of the U-plate? The U-plate functions as a compact mounting plate to provide a repeatable locating point for precision measuring, especially when used with the VCMT 16 caliper. Which calipers are explicitly compatible with this plate? Compatibility is specified for the VCMT 16 caliper; no additional model compatibility is listed for the TA032TM. What is the weight and handling advantage of the plate? The U-plate weighs 0.1 kg, giving easy handling and quick repositioning while keeping a small footprint on the bench. Who manufactures the product and how is it identified? The product is supplied by Teknik Makina and is identified in stock by SKU TA032TM for precise ordering and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U Plate, For Precision Caliper TPKN 22 - Teknik Makina
Benefit from precise compatibility with the TPKN 22 caliper and a compact, lightweight design that simplifies workshop integration and saves bench space. Order the U-Plate directly via Metav Werkzeuge or ask our consultants for tailored advice. U-Plate — mounting plate compatible with TPKN 22 from Teknik Makina The U-Plate is a compact mounting plate designed to accept the TPKN 22 caliper, providing a practical solution for secure attachment in workshop and inspection setups. Compatible with TPKN 22 caliper Lightweight at 0.1 kg Compact mounting solution Reliable compatibility that speeds inspection workflows The first priority for workshops is reproducible, straightforward measurement setups. The U-Plate delivers on that need through its direct compatibility with the TPKN 22 caliper, which removes the guesswork when pairing fixtures and instruments. With a slim profile and purpose-driven form, this mounting plate enables fast assembly and repeatable positioning, reducing setup time and supporting efficient quality control cycles. Easy integration and practical handling on the shop floor A lightweight accessory such as this plate keeps handling simple and reduces strain during repeated use. At just 0.1 kg, the component is easy to manoeuvre and reposition, so assembly tasks remain quick and manageable even in busy environments. The combination of low mass and clear mechanical purpose supports adaptable workstation layouts, helping workshops maintain order while ensuring measuring devices are readily at hand. Sourced for dependable supply and workshop confidence This item is listed under SKU TA012TM and produced by Teknik Makina, a recognised name for workshop fittings. When combined with Metav’s distribution approach—which acts as a quality filter for the European market—buyers benefit from a dependable supply chain and a broad offering of compatible tools and accessories. The clear specification and simple compatibility help purchasing teams standardise equipment without overcomplication. For procurement or product-matching advice on the Teknik Makina U-Plate (SKU TA012TM), contact Metav Werkzeuge GmbH for local support and fast delivery options Technical data Article number: TA012TM Name: U-Plate Manufacturer: Teknik Makina Data Weight: 0.1 kg eCl@ss: 21189290 Special features Suitable for TPKN 22 caliper Category: U-plate mounting solution FAQ What caliper is the plate designed for? The U-Plate (Teknik Makina, SKU TA012TM) is designed specifically for use with the TPKN 22 caliper. Is the material specification provided for the plate? No material is specified in the available data for the U-Plate TA012TM; the manufacturer’s product sheet should be consulted for material details. What is the weight of the U-Plate? The weight of the U-Plate (SKU TA012TM) is 0.1 kg. Can the plate be used for fixed workshop fixtures? The U-Plate is intended as a compact mounting solution compatible with the TPKN 22 caliper, suitable for incorporation into workshop fixtures where that caliper is used. How is the product identified for ordering and stock control? The product is listed under SKU TA012TM and as the U-Plate by Teknik Makina for clear identification in procurement and inventory systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U Washer Flat U-Section Washer, Steel - Teknik Makina
Take advantage of a compact, lightweight fastening solution with clear identification and dependable supply: the BSP031TM combines space-saving design and easy inventory handling for efficient workshop assembly. Order the U washer directly via Metav Werkzeuge or consult our specialists for integration advice. U washer BSP031TM — compact fastening washer by Teknik Makina The U washer offers a compact fastening component intended to improve load distribution in bolted assemblies and to simplify parts handling in workshop and industrial settings. Compact fastening washer, space-saving design Lightweight at 0.1 kg per piece Identified by SKU BSP031TM Manufactured by Teknik Makina Better load distribution for longer-lasting joints A simple washer can make a decisive difference in joint reliability. By increasing the effective bearing area, the washer reduces peak stresses beneath heads and nuts, helping to protect softer contact surfaces and decreasing the chance of local deformation. The documented weight of 0.1 kg indicates a lightweight component that nevertheless contributes to improved load distribution; this is particularly useful where repeated assembly and disassembly require consistent contact conditions. For production planners, a standardised washer saves time during assembly and reduces the need for rework caused by damaged clamping surfaces. Streamlined logistics and assembly efficiency Clear identification by SKU BSP031TM supports stock management and traceability in the workshop. The compact format minimises storage volume and eases handling on the assembly line, which can reduce picking times and improve throughput. Where a high parts count is managed, consistent labelling and small, uniform components help maintain an orderly inventory. The washer’s straightforward geometry allows for quick visual checks during incoming inspection and straightforward placement during bolting operations, contributing to steady, repeatable assembly processes. Proven sourcing and dependable supply chain Sourcing from an established manufacturer brings tangible advantages: consistent production standards and predictable deliveries help avoid supply interruptions. The association with Teknik Makina and the Metav distribution network provides a quality filter for the European market, aligning with workshop needs for reliable, repeatable parts supply. For procurement teams, this translates into lower administrative effort and fewer supplier touchpoints, supporting uninterrupted production and accurate stock forecasting. For procurement or technical guidance on integrating Teknik Makina fastening components into existing assemblies, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for advice and ordering via our European distribution hub. Technical Data Article number: BSP031TM Manufacturer: Teknik Makina eClass: 21189290 Weight: 0.1 kg Facts Weight (kg): 0.1 eClass: 21189290 Special features Product name: U washer SKU: BSP031TM FAQ What is the unit weight of the U washer BSP031TM? The U washer BSP031TM has a unit weight of 0.1 kg, as specified in the product data. Who manufactures the BSP031TM washer? The BSP031TM washer is manufactured by Teknik Makina and distributed via the Metav supply network. What is the intended function of this washer? The washer is intended as a fastening component to improve bearing area and reduce local stress beneath fasteners in bolted joints. How is the product identified for ordering and inventory? The component is identified by SKU BSP031TM, which should be used for order and stock management. Is material or coating information available for this washer? Material and coating details are not specified in the provided product data; please refer to the manufacturer’s specifications for technical confirmation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com