17mm Locking Screw M6, 14mm Diameter - Teknik Makina
Take advantage of a compact, reliable fastening solution: the locking screw combines an M6 thread, a 14 mm head and a 17 mm total length to secure measuring instruments and small fixtures; order directly via Metav Werkzeuge or consult the technical team for application advice. Locking screw TC052TM — locking fastener with M6 thread and 14 mm head (Teknik Makina) Locking screw TC052TM is a compact locking fastener designed for precision calipers and small workshop fixtures, offering a robust M6 thread and compatibility with a 4 mm hex key. M6 thread for secure fastening 14 mm head diameter Total length 17 mm Requires 4 mm hex key Reliable clamp action for measurement tools The compact fastener delivers consistent clamping force thanks to its M6 thread, which provides predictable tightening behaviour in repetitive assembly. As a small locking component intended for measuring instruments and light fixtures, the fastener’s geometry and thread form support repeatable positioning and minimal play, helping to maintain measurement integrity. The low mass of 0.1 kg reduces added weight on delicate slides while the 14 mm head gives adequate bearing surface without obstructing nearby parts. Simple handling and workshop compatibility Maintenance and replacement are straightforward: the part is operated with a 4 mm hex key, a common workshop tool, so integration into existing workflows is economical and rapid. The 17 mm total length keeps engagement clear and accessible in shallow thread applications, while the M6 thread aligns with standard metric fixtures. This combination reduces machining or modification work and supports quick assembly in production or service environments. Durable performance where precision counts Although material details are not specified, the component’s dimensions and thread standard indicate suitability for clamping tasks in measuring devices and jigs. The robust thread specification and head size ensure reliable locking under normal workshop loads and frequent retightening cycles. For processes where secure, low-profile fastening is required, this locking screw functions as a small but decisive element in achieving stable setups and repeatable results. For procurement or technical clarification on the Teknik Makina locking screw TC052TM, contact Metav Werkzeuge for tailored advice and ordering assistance — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: TC052TM Manufacturer: Teknik Cutting Tools SKU: TC052TM Dimensions & weight Diameter: 14 mm Thread: M6 Total length: 17 mm Weight: 0.1 kg eClass: 21189290 Compatibility & features Suitable for precision calipers — Allen key size 4 mm Compact locking fastener for small fixtures Designed for metric M6 applications FAQ What thread does this locking screw use? The locking screw TC052TM is specified with an M6 thread, suitable for standard metric fixings. Which tool is required to tighten the component? Assembly and adjustment are carried out with a 4 mm hex key; the locking screw TC052TM is designed for this common Allen key size. What are the key dimensions of the fastener? The fastener has a head diameter of 14 mm and a total length of 17 mm, with an overall weight of 0.1 kg. Is this locking screw suitable for calipers and measuring instruments? Yes — the locking screw TC052TM from Teknik Makina is intended for use with precision calipers and similar small fixtures where a compact M6 fastening is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17mm Locking Screw M6, Allen Key 2 Compatible - Teknik Makina
Take advantage of a compact M6 fastening that secures measuring jaws with minimal bulk and straightforward hex-key operation; combine this with rapid availability via Metav Werkzeuge for a reliable spare-part supply or technical clarification. Locking screw TH617TM — M6 thread, 17 mm overall length A Locking screw TH617TM designed for secure fastening on precision measuring tools and small assemblies, operable with a 2 mm Allen key for fast adjustment. Standard M6 thread for metric fittings Compact overall length of 17 mm Compatible with 2 mm Allen key Precision fastening that reduces measurement variation A compact locking screw with an M6 thread provides a standardised connection that integrates easily with metric components on measuring instruments. The short 17 mm overall length keeps the fastener profile low, which is beneficial where clearance is limited and where protrusion can affect alignment. By using a metric thread, replacement becomes straightforward and compatible with many existing caliper and gauge assemblies, supporting consistent measurement behaviour and simplified inventory management. Simple maintenance and secure adjustment for workshop use Adjustment is performed with a 2 mm Allen key, allowing quick tightening and controlled torque without specialised tools. The functional design supports repeatable locking of movable parts on precision calipers, minimising slippage during repeated use. With a listed weight of 0.1 kg, handling and storage are uncomplicated, and the fastener’s low mass makes it suitable for portable instruments and compact fixtures where added bulk is undesirable. Robust fit for production and service environments Engineered as a straightforward locking element, this part promotes reliable clamping in assembly and repair workflows and helps maintain measurement integrity across operations. The TH617TM unit from Teknik Cutting Tools is a practical spare for maintenance kits and calibration benches, offering a clear benefit in uptime and part standardisation. For machines and hand tools where controlled positioning is essential, this locking component contributes to operational consistency and easier servicing. For a compatibility check or technical clarification regarding the Teknik Cutting Tools locking screw TH617TM, contact Metav Werkzeuge GmbH in Emmerich for expert advice and reliable supply. Technical data Article number: TH617TM Eclass: 21189290 Facts Thread: M6 Overall length: 17 mm Weight: 0.1 kg Special features Operated with 2 mm Allen key Metric fastening for standard fittings Designed for locking function on measuring instruments FAQ What thread size does the locking screw use? The locking screw is supplied with an M6 metric thread, suitable for standard M6 mating components. Which tool is required to tighten the screw? Tightening and adjustment are performed with a 2 mm Allen key, matching the screw’s internal hex drive. Is the component suitable for precision calipers? Yes — the TH617TM locking screw is intended for use on precision measuring assemblies and is compatible with caliper-style locking applications. What are the overall dimensions and weight of the screw? The fastener has an overall length of 17 mm and a listed weight of 0.1 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2.5mm Allen Key Hex Wrench, Chrome Plated - Teknik Makina
Compact design with exact fit for 2.5 mm hex fasteners and simple identification via SKU 25ALLENTM — combine precision, easy handling and reliable supply. Order directly through Metav Werkzeuge or consult our specialists for tailored advice. Allen key — 2.5 mm hex, Teknik Makina A Allen key for precise tightening and loosening of 2.5 mm hex fasteners, intended for routine workshop and maintenance tasks. Allen key 2.5 mm hex Lightweight at 0.1 kg SKU 25ALLENTM for ordering Consistent, measurable fit for small hex fasteners A compact hand tool that gives a defined contact geometry for 2.5 mm hex sockets, ensuring a snug fit and reduced cam‑out. The clear specification of 2.5 mm allows straightforward selection for metric assemblies and repeatable torque application with compatible tools. This factual clarity supports efficient procurement and reduces assembly errors, making the item a pragmatic choice where exact hex sizing is required. Minimal weight and simple handling for everyday use With a listed weight of 0.1 kg, the tool remains easy to handle and store without adding bulk to a technician’s kit. The low mass supports swift manual operation during repetitive tasks and keeps toolboxes lighter on the workbench. The emphasis on lightweight handling translates into reduced user fatigue during frequent adjustments, which is a tangible productivity benefit in fast‑paced workshop environments. Traceable ordering and inventory management The product is identifiable by SKU 25ALLENTM, enabling direct ordering and simplified stock control. Clear article identification speeds up reordering cycles and integrates with purchasing systems. Reliable itemisation supports predictable supply from established vendors and helps avoid downtime caused by unclear tool specification — a rational advantage for procurement teams seeking continuity. Reliability through clear specification and supplier proximity Sourced from Teknik Makina and offered via Metav’s distribution, the tool benefits from a transparent supply chain and a focus on accessible precision. The concise technical definition and straightforward classification make it easier to assess suitability for tasks that call for metric hex keys. Combined with Metav’s distribution centre in Emmerich, the arrangement offers practical reassurance about availability and consistency. For enquiries about Teknik Makina Allen keys or to request ordering information via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and fast fulfilment Technical data Article number: 25ALLENTM Name: Allen key Brand: Teknik Makina Dimensions & weight Size: 2.5 mm hex Weight: 0.1 kg ECLASS: 21189290 Features & suitability Product type: Allen key (hex key) Intended use: hex fastener operations Identification: SKU 25ALLENTM FAQ What size hex does this tool fit? The tool is specified for 2.5 mm hex fasteners and is identified as an Allen key for that size. Which manufacturer supplies this Allen key? This Allen key is supplied by Teknik Makina and stocked under SKU 25ALLENTM for ordering and inventory purposes. Is the weight relevant for daily use? Yes — the listed weight of 0.1 kg indicates a lightweight hand tool suitable for frequent manual use without significant handling fatigue. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Locking Screw M8 With Allen Key Compatibility - Teknik Makina
Take advantage of a secure M8 threaded fastening designed specifically for precision measurement tools; the compact 21 mm overall length keeps clamping neat in tight assemblies while the 4 mm Allen key drive ensures straightforward adjustment. Order the locking screw directly via Metav Werkzeuge or contact the consultants for compatibility advice. Locking Screw TC300TM – M8 thread, 21 mm overall length (Teknik Makina) A locking screw for precision calipers that provides secure fixation with an M8 thread and is operated with a 4 mm Allen key, suitable for workshop and inspection use. M8 thread for secure fastening 21 mm overall length for compact fit Operated with 4 mm Allen key Intended for precision calipers Secure clamping that prevents measurement drift A compact fastener with an M8 thread offers reliable axial clamping for sliding measurement tools. By preventing unwanted movement, this type of locking screw reduces the risk of measurement error and rework, improving throughput in repetitive inspection tasks. The robust thread form ensures repeatable clamping torque, which translates into stable readings on precision calipers and other sliding gauges. Easy adjustment and maintenance with standard tooling The drive accepts a 4 mm Allen key, which simplifies assembly and on-site adjustments without special tools. The short 21 mm overall length makes the component ideal where space is limited, such as inside caliper heads or small fixtures. Maintenance cycles are faster because standard hex keys are widely available in workshops, lowering downtime and keeping measuring equipment in service with minimal effort. Workshop supply reliability and traceable stock Delivered under SKU TC300TM, this lock screw is compact and light at approximately 0.1 kg, which eases storage and handling in busy shops. Sourcing through Metav provides supply-chain transparency and centralised procurement for measurement equipment; the company’s broad range means fewer suppliers to manage and a dependable stock buffer from the Emmerich location. The component is a practical choice for instrument makers and maintenance teams seeking consistent clamping performance. For procurement or technical clarification regarding Teknik Makina locking screws (TC300TM), contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com to verify fitment and availability Technical data Article number: TC300TM Manufacturer: Teknik Makina Eclass: 21189290 Facts Thread: M8 Overall length: 21 mm Weight: 0.1 kg Special features Suitable for precision calipers Drive type: 4 mm Allen key Intended function: locking screw for sliding gauges FAQ What thread size does the locking screw have? The locking screw is supplied with an M8 thread, providing a standard metric fastening for caliper assemblies and similar fixtures. Which tool is required to operate the screw? Operation requires a 4 mm Allen key; the TC300TM is designed for quick adjustment with this common hex key size. Is the fastener suitable for precision calipers? Yes, the component is intended as a locking screw for precision calipers and similar sliding measurement tools where a compact clamp is required. How is the item identified for reordering? The part is available under SKU TC300TM; reorders using this SKU ensure the correct locking screw from Teknik Makina is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Locking Screw M8, Fits 3mm Allen Key - Teknik Makina
Secure fastening is achieved through the combination of a standard M8 thread and a compact 21 mm profile, together with simple adjustment using a 3 mm Allen key — order directly via Metav Werkzeuge or consult our technical advisors for compatibility checks. Locking screw TH821TM — M8 thread, 21 mm compact locking screw (Teknik Makina) A Locking screw TH821TM designed for secure clamping on precision calipers and similar measuring instruments, operated with a 3 mm Allen key for straightforward installation and adjustment Secure M8 thread for firm clamping Compact 21 mm length for tight assemblies Fits 3 mm Allen key for easy adjustment Reliable fastening for precision measuring equipment The component features a standard M8 thread that provides a predictable interface for clamping points in measuring equipment. This thread size is widely used in workshop fixtures, so the fastener ensures secure clamping and minimal axial play during measurement cycles. Reduced movement at the contact point improves repeatability and contributes directly to consistent measurement results in everyday inspection tasks. Compact design for confined assemblies and quick adjustment With a total length of 21 mm the fastener is tailored for installations where space is limited; its low profile permits neat integration without adding bulk to the measuring setup. Adjustment is performed with a 3 mm Allen key, which allows fast, controlled torque application and simplified maintenance during routine checks. The compact form factor supports rapid replacement and minimal downtime in production or service environments. Workshop-ready specification and procurement benefits Weighing only 0.1 kg, the item is light to handle and suitable for stocked spare-part programmes where standardisation reduces procurement complexity. The Teknik Makina origin signals compatibility with common industrial tolerances and supports interchangeability across M8 mounting points. For specification enquiries, Metav’s technical team can provide advice on fitment and spare-part planning to streamline workshop logistics. For supply and technical guidance on the TH821TM locking screw from Teknik Makina, contact Metav Werkzeuge — technical enquiries by eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: TH821TM Manufacturer: Teknik Makina Weight: 0.1 kg Dimensions & thread Thread: M8 Total length: 21 mm Compatibility & application Operates with 3 mm Allen key Intended for securing precision calipers and measuring tools FAQ How is the locking screw adjusted? The TH821TM locking screw is adjusted using a 3 mm Allen key; rotate until firm engagement is achieved, avoiding excessive torque that could distort the measuring instrument. Is this fastener suitable for precision calipers? Yes. The component is intended to secure precision calipers and similar measuring tools, offering an M8 thread and a compact 21 mm form suitable for confined mounting points. Can the TH821TM replace other M8 locking screws? Where the mounting interface accepts an M8 thread and the available axial clearance accommodates a 21 mm length, the TH821TM can be used as a compatible replacement. What are the key dimensions and weight to check for inventory management? Key specification points are: M8 thread, 21 mm total length and 0.1 kg weight; use these values when planning spares and storage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22 ER U-Plate For Caliper, Precision Mounting Component - Teknik Makina
Compact, lightweight and compatible with 22 ER calipers, the U-plate provides a stable measurement reference while adding minimal mass to the setup; its modest weight and straightforward function support quicker, more repeatable checks. Order the U-plate directly via Metav Werkzeuge or ask our consultants if needed. U-plate — accessory plate for precision calipers, compatible with 22 ER (Teknik Makina) The U-plate is an accessory plate designed for workshop and inspection use with 22 ER precision calipers, enabling stable positioning when measuring recessed or narrow features. Compatible with 22 ER precision calipers Lightweight construction, approx. 0.1 kg Manufactured by Teknik Makina Stable reference for precise confined measurements A compact, U-shaped support plate that serves as a stable reference when working in confined or awkward measurement points. The design reduces lateral movement during contact measurements, which leads to improved precision and fewer repeated checks. For inspection routines where consistency is required, the accessory plate helps to standardise the measurement setup and supports reproducible results without adding significant handling effort. Simple integration and consistent repeatability Engineered for uncomplicated retrofitting to existing calipers, the accessory offers compatibility with the 22 ER mounting interface so that workshop technicians can integrate it into established workflows with minimal adjustment. The plate’s lightweight nature, approximately 0.1 kg, lowers the influence on instrument balance while still providing a secure seating for the caliper jaws. This combination of low mass and secure support contributes directly to improved repeatability in routine dimensional checks. Workshop-grade sourcing and traceable identification Produced by Teknik Makina and listed under SKU TA062TM, the accessory plate is traceable and straightforward to order for procurement departments seeking standardised measurement aids. As a dedicated accessory for precision calipers, the plate assists in speeding up setup time and reducing measurement-related rework, which supports more efficient shop-floor operations and a better allocation of inspection resources. For procurement advice or to source Teknik Makina accessories such as this U-plate, contact Metav Werkzeuge in Emmerich for personalised assistance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: TA062TM Manufacturer: Teknik Makina eCl@ss: 21189290 Facts Weight: 0.1 kg Special features Suitable for caliper: 22 ER Accessory type: U-plate Country of origin information: as provided by manufacturer FAQ What calipers is the U-plate compatible with? The accessory plate is compatible with 22 ER precision calipers and was specified to interface with that model family for stable measurements. How does the U-plate improve measurement reliability? By providing a stable reference and reducing lateral movement, the plate helps achieve more consistent contact positioning and thus more repeatable measurement results. What is the weight of the accessory plate? The U-plate weighs approximately 0.1 kg, which minimises added mass on the caliper while still offering secure support during inspection tasks. Who manufactures this accessory and how is it identified? The plate is produced by Teknik Makina and is listed under SKU TA062TM, allowing straightforward identification for ordering and stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm Screw for End Mill M6, 9.5mm Diameter - Teknik Makina
The combination of a metric M6 thread, a compact 9.5 mm diameter and a 22 mm total length ensures secure clamping with minimal axial play; ideal for high-repeatability milling setups. Order the screw directly via Metav Werkzeuge or consult our team for application-specific guidance. Screw for End Mill TC181TM — M6 thread, 9.5 mm diameter (Teknik Makina) The Screw for End Mill TC181TM is a retention fastener designed to secure end mill shanks in milling holders and adaptors, providing stable clamping for precision cuts. M6 standard thread for secure clamping Diameter 9.5 mm for tight fit Total length 22 mm for compact assemblies Hex key 3 mm compatible with Allen wrench Secure clamping that improves tool stability and repeatability A compact retention screw such as this is a straightforward way to reduce axial and radial movement in the toolholder. With a metric M6 thread and a 9.5 mm diameter, the fastener creates consistent contact pressure across the clamping interface, which reduces runout and enhances concentricity during milling. The result is fewer rework cycles and more predictable tool life, translating directly into improved process efficiency for production and repair workshops. Quick serviceability for reduced downtime Maintenance cycles benefit from a simple design that is compatible with a 3 mm Allen key, enabling fast replacement or retightening at the bench or on the machine. The 22 mm total length keeps the assembly compact while allowing enough engagement for reliable fixation, so changeovers are completed swiftly without special tooling. This eases everyday workshop routines and supports higher machine availability — a practical advantage for busy job shops and production lines. Designed for integration with standard holders and workshop logistics Manufactured to fit conventional end mill shank arrangements, the component follows familiar metric conventions making it straightforward to match with existing holders and adaptors. The screw’s lightweight nature and standard geometry simplify inventory management and spare-part planning. Combined with Metav Werkzeuge’s sourcing and quality-filtering from Emmerich, procurement becomes more dependable, helping to centralise supplies and support a smoother workflow across industry, craft and trade operations. For tailored advice on matching this Teknik Makina retention screw to specific holders or to secure appropriate spares, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TC181TM Name: Screw for End Mill Manufacturer: Teknik Makina Weight: 0.1 kg Facts Diameter: 9.5 mm Thread: M6 Total length: 22 mm Weight: 0.1 kg Special features Compatible with 3 mm Allen key Suited for end mill shanks Metric M6 thread standard FAQ Is this screw compatible with standard end mill holders? The TC181TM screw is intended for use with holders that accept a metric M6 thread and a 9.5 mm clamping interface; verification of the holder thread and bore is recommended before installation. Which tool is required to tighten the fastener? A 3 mm Allen key (hex key) is specified for the retention screw, allowing straightforward tightening and removal at the machine or workshop bench. How often should the screw be inspected or replaced? Inspect the screw periodically for thread wear, deformation or corrosion; replacement is advised when secure clamping can no longer be achieved to maintain the integrity of the clamping system. What is the SKU and who manufactures this component? The SKU is TC181TM; the part is supplied by Teknik Makina and intended as a retention screw for end mill assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
24mm M8 Locking Screw Hex Socket For Caliper Use, 17.1mm Diameter - Teknik Makina
Take advantage of the secure clamping provided by the M8 thread and the compact 17.1 mm head, which together ensure stable retention in precision measuring tools; combine this with a short 24 mm overall length for tight installation spaces, and order the part directly via Metav Werkzeuge or consult their advisors for application advice. Locking screw TC056TM – M8 thread, 17.1 mm head (Teknik Makina) Locking screw TC056TM designed for precision calipers and similar measuring instruments, providing compact, reproducible clamping where space and repeatability matter M8 thread for secure fastening Ø 17.1 mm head diameter Total length 24 mm Compatible with 5 mm Allen key Secure clamping for repeatable measurement results The M8 thread and substantial head diameter deliver a compact yet reliable clamping point that reduces play in measuring assemblies. This fixing element is intended for use in measurement and workshop settings where repeatability and positional stability are essential; by replacing worn fasteners with a standardized threaded component, measurement scatter is minimised and calibration intervals are easier to maintain. The component’s geometry supports even torque transmission, helping to avoid jaw misalignment on precision callipers and similar instruments. Fast adjustment and straightforward maintenance Adjustment is performed with a common 5 mm Allen key, allowing quick installation and tightening without specialised tooling. The short 24 mm length keeps the screw profile low, which benefits fixtures with confined clearance. Lightweight construction contributes to ease of handling during replacement and reduces additional load on delicate measuring heads. For workshops that require rapid on-bench swaps, this screw offers a pragmatic combination of accessibility and compact design that keeps downtime to a minimum. Compatibility and workshop integration As a standardised M8 fixing, this locking screw integrates easily into established maintenance routines and pairs with many precision calipers and gauging fixtures. The 17.1 mm head provides positive engagement for adjustment tools while remaining small enough for dense assemblies. When combined with structured inventory management from a reliable supplier, the part supports uninterrupted production and measurement workflows. For procurement, using standardised fasteners reduces part variety and simplifies spare-part logistics across measurement equipment fleets. For reliable clamping in precision measurement tools, request the Teknik Cutting Tools locking screw TC056TM from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for procurement guidance or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TC056TM Thread: M8 Head diameter: 17.1 mm Total length: 24 mm Weight: 0.1 kg Facts Thread size: M8 Head diameter: 17.1 mm Overall length: 24 mm Mass: 0.1 kg Special features Designed for precision calipers and measuring fixtures Adjustment with 5 mm Allen key Compact profile for restricted clearance assemblies FAQ What thread standard does this screw use? The screw uses an M8 thread, which is the metric standard specified for the TC056TM locking screw by Teknik Cutting Tools. Is this part suitable for precision calipers? Yes, the locking screw TC056TM is intended for use with precision calipers and similar measuring instruments where a compact, reliable clamp is required. Which tool is needed to tighten the screw? Tightening and adjustment require a 5 mm Allen key, allowing straightforward maintenance without specialised equipment. What are the dimensions of the head and overall length? The head diameter is 17.1 mm and the total length is 24 mm, dimensions selected for secure engagement in confined measuring assemblies. Can this screw be used as a direct replacement for other locking screws? Where the thread (M8), head clearance and length match, the TC056TM can be used as a replacement; compatibility should be confirmed against the original part’s dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Locking Screw M5, Hex Key 3 Compatible - Teknik Makina
A compact, reliable solution for secure caliper fixation: the combination of an M5 thread and Ø 10 mm head delivers dependable clamping force, while the 26 mm overall length keeps the fastener unobtrusive in tight assemblies — order via Metav Werkzeuge or consult our specialists for product selection and supply. Locking screw by Teknik Makina — M5 thread, 26 mm overall length Locking screw for secure retention in measuring equipment and light workshop assemblies; designed for simple tightening with a 3 mm Allen key. M5 thread for standard fittings Ø 10 mm head for positive engagement 26 mm overall length for compact installation Requires 3 mm Allen key for assembly Reliable fixation for precision measuring instruments The fastener provides a consistent locking function that is particularly useful where repeatable position retention is required. With an M5 thread and a modest head diameter, the component achieves firm clamping without adding bulk. This makes it well suited to applications where space is limited but stability cannot be compromised. The technical simplicity of the design reduces maintenance needs and supports long-term serviceability in workshop environments. Quick installation and workshop compatibility Installation is straightforward thanks to the standard thread form and the compatibility with a common Allen key 3 mm. The combination of a small head (Ø 10 mm) and 26 mm length allows easy access even in confined setups, so adjustments can be made efficiently during measurement tasks or device servicing. For questions about fit or if additional technical data are required, Metav Werkzeuge offers detailed guidance and can advise on part selection and supply logistics — contact details are provided below. Built for dependable everyday use Though compact, this fastener is designed to perform reliably in routine workshop conditions. The lightweight design keeps added mass to a minimum (approx. 0.1 kg), while the standard M5 specification ensures compatibility with common fixtures and measuring tools. Sourcing from a specialist manufacturer such as Teknik Makina supports consistent component quality and traceability, contributing to fewer interruptions in production and measurement workflows. Contact Metav Werkzeuge for part TC046TM from Teknik Makina for secure caliper retention and expert advice on integration into your workshop setup Technical data Article number: TC046TM Manufacturer: Teknik Makina eClass: 21189290 Weight: 0.1 kg Facts Diameter: 10 mm Thread: M5 Overall length: 26 mm Special features Locking function Requires Allen key 3 mm Compact head for tight assemblies FAQ What is the thread specification of this locking screw? The locking screw is supplied with an M5 thread; refer to SKU TC046TM for exact matching. Which tool is required to tighten the component? Tightening is performed with an Allen key 3 mm, as specified for the part from Teknik Makina (TC046TM). What are the head diameter and overall length? Head diameter is 10 mm (Ø 10 mm) and overall length is 26 mm, suitable for compact installations. Is the fastener suitable for use in measuring instruments? Yes, the component is designed as a locking screw intended to secure positions within measuring equipment and similar small assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3.5mm Allen Key Hex Wrench, 0.1kg Lightweight - Teknik Makina
Take advantage of a precise 3.5 mm drive and a compact, lightweight design for consistent assembly work; reliable traceability via SKU 35ALLENTM ensures quick inventory management — order directly from Metav Werkzeuge or consult the technical advisers for compatibility checks. Allen key 3.5 mm — compact hex key for workshop assembly by Teknik Makina The Allen key 3.5 mm is a small, practical hex tool intended for routine fastening tasks and maintenance in workshops and production environments 3.5 mm hex key size Compact for tight spaces Lightweight 0.1 kg for easy handling SKU 35ALLENTM for clear traceability Precise fit reduces screw damage and downtime A correctly sized 3.5 mm hex drive provides a snug engagement with hex socket fasteners, lowering the risk of cam‑out and rounded heads. The main advantage for industrial and workshop settings is consistency: repeated use of a matching tool reduces rework and keeps assembly times predictable. The compact dimensions support access to confined assemblies while retaining sufficient leverage for typical hand‑tightening operations. Where torque must be controlled by feel rather than measurement, a well‑fitting hex key contributes directly to process quality and fewer defective joints. Small footprint improves accessibility in confined assemblies The compact hex key form is especially useful where space is at a premium — inside housings, on machinery panels or in jigs. The light overall mass (approx. 0.1 kg) makes the tool easy to carry and integrate into mobile tool kits or fixed workstations. For production staff and maintenance teams, the reduced bulk minimises tool change time and simplifies organisation on workbenches. In addition, simple geometry means the tool is easy to clean and store, supporting orderly workshop practices and faster changeovers between tasks. Traceability and workshop logistics that support procurement Clear identification via SKU 35ALLENTM and the manufacturer reference Teknik Makina streamlines stock management and reordering procedures. Maintaining consistent tool types across a fleet of technicians reduces variability in assembly results and supports predictable spare‑parts handling. The straightforward specification — size, drive type and weight — permits rapid comparison with other hand tools when updating tool sets or specifying maintenance kits, helping purchasing and workshop managers make evidence‑based choices. Contact Metav Werkzeuge for a specification check and to integrate Teknik Makina’s 3.5 mm Allen key (SKU 35ALLENTM) into workshop stocks with assured traceability and supply reliability Technical Data Article number: 35ALLENTM Name: Allen key 3.5 mm Manufacturer: Teknik Makina Eclass: 21189290 Data Size: 3.5 mm Weight: 0.1 kg Special features Drive type: hex Traceability: SKU 35ALLENTM Intended use: workshop assembly and maintenance FAQ What size is this Allen key? The tool is a 3.5 mm Allen key (Teknik Makina, SKU 35ALLENTM), suitable for corresponding hex socket screws. Is the key suitable for confined spaces? Yes; the compact design and low weight of this hex key make it appropriate for access in tight assemblies and maintenance applications. How does SKU 35ALLENTM help with inventory control? SKU 35ALLENTM provides a clear reference for ordering and stock tracking, enabling consistent replacement and simplified procurement processes. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3.5mm Knee Lever Fast Change For Indexable Inserts, 12.2mm Overall - Teknik Makina
Take advantage of a compact, high-precision knee lever that combines reliable clamping with a small footprint — Ø 3.5 mm and 12.2 mm total length ensure secure fixing in tight tool assemblies. Order the component directly via Metav Werkzeuge or consult the team for compatibility checks and rapid dispatch. Knee lever — compact clamping element by Teknik Cutting Tools, Ø 3.5 mm, 12.2 mm length Knee lever designed for secure clamping of indexable inserts and compact toolholder setups, offering a lightweight, durable option for repetitive production tasks Precision clamping for indexable inserts Compact Ø 3.5 mm profile Lightweight at 0.1 kg, durable design Consistent clamping for repeatable results This clamping element delivers precision where repeatability matters: the compact geometry and controlled dimensions translate into stable seat force for indexable tooling. The Ø 3.5 mm profile and 12.2 mm overall length reduce play in the holder, which helps maintain cutting edge position and minimises rework. As a result, machining cycles stay predictable and process audits are simpler, with an emphasis on measurable improvements in part quality rather than subjective claims. Space-saving design that improves accessibility A compact lever reduces interference in crowded tool zones and enables easier set-up in multi-station toolholders. The lightweight construction at 0.1 kg lowers inertia in rotating assemblies and makes manual handling during tool changes more efficient. Where access is limited, the reduced envelope supports faster insertion and removal of indexable inserts, helping to shorten machine downtime and streamline shift-based workflows without compromising clamp stability. Supply certainty and partner-level reassurance Sourced from Teknik Cutting Tools and distributed via Metav Werkzeuge, the component is supported by a logistics and quality filter located in Emmerich. Metav’s offering emphasises availability and precision: a broad stock range, transparent order processing and a history of consistent delivery that supports production planning. Choosing this component therefore combines a focused technical solution with the pragmatic benefits of a dependable supply chain and documented traceability. For a compact, reliable clamping solution from Teknik Cutting Tools, contact Metav Werkzeuge for product matching and fast supply from Emmerich — experts are available to advise on integration and compatibility Technical data Article number: TL3TM Manufacturer: Teknik Cutting Tools SKU: TL3TM Weight: 0.1 kg Diameter: 3.5 mm Total length: 12.2 mm Numbers / core technical data Ø: 3.5 mm Total length: 12.2 mm Weight: 0.1 kg SKU: TL3TM Special features / versions Suitable for indexable inserts Fast dispatch (description indicates quick shipment) Long service life indicated in description Compact knee lever geometry for tight assemblies FAQ What materials is the knee lever compatible with? The knee lever is specified for use with indexable inserts; suitability for specific workpiece materials depends on the insert and holder combination rather than the lever itself How does the Ø 3.5 mm diameter affect installation? The Ø 3.5 mm diameter determines the lever’s engagement fit and supports compact installations where space is limited, ensuring consistent seating in small toolholders Is this component supplied by Teknik Cutting Tools via Metav Werkzeuge? Yes — the part is supplied by Teknik Cutting Tools and distributed through Metav Werkzeuge (SKU TL3TM) for reliable European delivery Can the lever be used in rotating assemblies? The compact form and lightweight mass make the lever suitable for use in assemblies where low inertia and stable clamping are required; application specifics should be checked against the toolholder design Are replacement parts or spare levers available? Spare levers with the same specifications (SKU TL3TM) can be ordered through the Metav Werkzeuge range; availability is subject to current stock Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3.5mm Torx Screw T8, M2.5 Thread 5.5mm Length, 60° Head Angle - Teknik Makina
Data inconsistency detected for SKU TC060TM: the item is listed as a Torx screw but the specified driver is "Inbussschlüssel T8" (Allen key T8), creating a conflict in the drive type. This discrepancy suggests a potential error in either the product classification or the associated tool specification, which could lead to confusion for customers or incorrect usage of the product. It is essential to cross-check the technical details, including the drive type and corresponding tool, to ensure accuracy and consistency in the product database. Please verify the product specifications thoroughly before a product description can be generated and published.
30mm U Washer, Zinc-Plated, 0.1kg - Teknik Makina
Benefit from consistent dimensions and dependable fixing performance that streamline assembly operations and reduce rework. Order the U-washer directly via Metav Werkzeuge or ask our consultants if needed. U-washer BSP030TM — U-shaped fastening washer for secure assemblies | Teknik Makina A U-washer for general fastening and retaining tasks in workshop and industrial assembly applications, supplied by Teknik Makina *Consistent dimensional control for repeatable fits *Compact component with low handling weight *Designed for secure retention in standard assemblies *Suitable for integration with common fasteners Secure fixing for routine assemblies The U-shaped fastening element is engineered for reliable fastening where fastener clearance and controlled lateral support are required. Owing to precise stamping and finishing, this component delivers consistent dimensions that reduce variability in repetitive assembly tasks. Where a fastening element must maintain position under vibration or light shear, the shaped washer acts as a low-complexity retention aid, lowering the risk of loosening without altering the primary fastener torque. The part’s modest mass of 0.1 kg supports straightforward handling and predictable performance in pick-and-place workflows. Integration and compatibility within workshop processes Designed as a basic mechanical accessory, the component integrates easily into standard assembly sequences and fixtures. Its U-profile permits quick placement around shafts or studs without full disassembly, which shortens fixture time and simplifies maintenance cycles. For procurement and inventory control, the article is identified as SKU BSP030TM and can be stocked alongside other common washers and retaining parts to streamline replenishment. The uncomplicated geometry makes the element compatible with a wide range of metric fasteners and ensures straightforward interchangeability in mixed-tool environments. Dependable sourcing and quality assurance for daily operations Sourcing the component through an established channel adds an operational layer of confidence. Metav’s model of the democratisation of precision means accessible quality parts are available to workshops and industrial buyers alike, backed by a central quality filter at the Emmerich facility. This approach supports continuity of supply and provides traceability, which is particularly useful for customers who require consistent repeat purchases. The supplier’s track record — reflected in over 48,000 customers — underscores a history of reliable delivery and product conformity that lowers procurement risk. Practical handling, storage and procurement clarity The compact form factor reduces storage footprint and simplifies kitting for assembly lines; the small mass and uncomplicated shape enable efficient packaging and reduced transport bulk. Documentation and labelling use the SKU BSP030TM to ensure accurate part selection in procurement systems and picking lists. For production planners, the element serves as a straightforward, low-complexity component that supports both short-run and continuous manufacturing environments by reducing the need for specialised fasteners or bespoke retainers. For tailored supply and logistics from Metav Werkzeuge — order via the Emmerich hub or consult Metav’s specialists for compatibility guidance and delivery options Technical data Article number: BSP030TM Name: U-washer Manufacturer: Teknik Makina ECLASS: 21189290 Weight: 0.1 kg Facts Weight: 0.1 kg ECLASS: 21189290 Special features U-shaped retaining washer design Intended for fastening and retention tasks Compact handling and storage properties FAQ What is the primary purpose of this retaining element? The U-washer provides lateral retention and simplified placement around shafts or studs; the U-washer BSP030TM is intended for standard fastening and retaining tasks. Is the part compatible with metric fasteners and common assemblies? Yes, the component is compatible with common metric fasteners and is designed for integration into typical workshop and industrial assemblies. How heavy is the part and what does that mean for handling? The single piece weight is 0.1 kg, which means the component is easy to handle and imposes minimal additional load in kitting and transport. Can this component be stocked alongside other standard washers for fast replenishment? Yes, SKU BSP030TM is suitable for catalogue stocking and routine replenishment alongside other fasteners and washers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3mm Allen Key Hex L-Shaped, Chrome-Plated - Teknik Makina
Compact, reliable and ready for routine assembly work: the compact design and the professional hex profile ensure efficient fastening with minimal tool weight, while procurement and support are available through Metav Werkzeuge for straightforward workshop supply. Allen key — compact metric hex key by Teknik Makina (SKU 3ALLENTM) A compact Allen key engineered for routine assembly and maintenance tasks in professional workshops and service environments Compact, lightweight design 0.1 kg Metric hex profile for standard fittings Manufactured by Teknik Makina Faster, neater fastening for everyday workshop tasks The compact design and the defined hex key geometry make this tool a practical choice for recurring fastening work in production, maintenance and assembly. The short profile reduces wobble and improves access in confined spaces, while the low mass contributes to reduced hand fatigue during repetitive tasks. The balanced combination of compact form and sturdy hex engagement supports reliable alignment and smoother operation, delivering measurable efficiency gains in small- to medium-scale workflows. Secure contact and repeatable engagement for fewer slips A correctly formed hexagon profile distributes torque across flat contact faces rather than corners, which reduces the risk of rounding fastener heads and improves repeatability when applying torque. This geometry explanation is useful for non-specialists: the wrench bears on six flats of the screw head, increasing contact area and lowering stress concentrations. For routine maintenance and light production work, that means fewer damaged fasteners and less rework — a direct saving in time and materials. Easy storage and quick portability for mobile technicians Weighing only 0.1 kg, the tool is tailored for technicians who value mobility without compromising on basic performance. The lightweight nature and compact footprint allow efficient tool organisation, keeping essential hex keys at hand in tool pouches or wall racks. For mobile service engineers and shop-floor technicians, this portability translates into faster job turnaround and a tidier toolbox, supporting a more organised workflow and less time spent searching for the right implement. Consistent supply and professional sourcing through Metav Sourcing this Teknik Makina item via Metav ensures access to a broad industrial portfolio and the benefits of a European distribution hub. Metav stands for democratisation of precision, combining decades of expertise with an expansive catalogue to reduce supplier complexity. With a long-standing customer base and transparent order handling from Emmerich, the partnership reinforces reliable supply for workshops and trade specialists seeking consistent quality and stock availability. For procurement and technical guidance on this Teknik Makina Allen key (SKU 3ALLENTM), rely on Metav Werkzeuge for targeted advice and dependable delivery from Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for concise support. Technical data Article number: 3ALLENTM Name: Allen key Manufacturer: Teknik Makina Facts Weight: 0.1 kg eCl@ss: 21189290 Special features inbussschlussel: 3 Allen SKU: 3ALLENTM FAQ What does the product include? The product is listed as an Allen key set described by the field "3 Allen", indicating a package composition noted in the technical details for the Teknik Makina item (SKU 3ALLENTM). Is this suitable for professional workshop use? Yes, the hex profile and compact design make the item appropriate for routine professional assembly and maintenance tasks in workshop environments. How much does the tool weigh? The documented weight for the item is 0.1 kg, making it lightweight and easy to carry within a tool kit. Why is hex geometry important for fastening? Hex geometry increases contact area on the fastener flats, lowering stress on corners and helping to prevent rounding; this contributes to more reliable torque transfer and less rework. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.2mm Torx Screw T6 Hex Drive M2, 60° Head Angle - Teknik Makina
Benefit from the secure M2 thread and a Ø 2.8 mm shank combined with a low-profile 4.2 mm overall length for compact, reliable fastening; order directly via Metav Werkzeuge or consult our specialists for application advice. Torx screw TC058TM – M2 thread, Ø 2.8 mm, 4.2 mm length (Teknik Makina) The Torx screw TC058TM is a small, precision fastener intended for compact assemblies where reliable torque transfer and low profile are required M2 metric thread for fine assemblies Ø 2.8 mm shank for compact fastening 4.2 mm overall length for low-profile joins Torx drive compatible with T6 tool Precision fastening for miniature assemblies that last Small components demand consistent fixing. With an M2 metric thread and a Ø 2.8 mm shank, this screw delivers secure clamping in confined spaces while minimising material stress. The 4.2 mm overall length reduces protrusion, making it suitable for electronics housings, instrument panels and precision brackets. By specifying a standard metric thread, interchangeability and traceability in production are supported, simplifying inventory control and assembly planning. Efficient drive and consistent torque transfer for repeatable results The Torx drive geometry is engineered for axial engagement and reduced cam‑out, which improves torque application and reduces the risk of driver slippage. Compatibility with a T6 tool ensures accurate engagement in manual and powered assembly processes; this translates into faster installation times and lower rework rates. Where repeated tightening cycles are required, the combination of the Torx interface and fine M2 thread delivers reproducible clamping force and fewer damaged heads. Seamless workshop integration and procurement confidence Lightweight and compact, the fastener is supplied under SKU TC058TM by Teknik Makina and is suited to sectors that prioritise miniaturised, reliable joins. The listed mass of 0.1 kg supports straightforward handling and stocking decisions; Metav’s logistics and quality control act as a regional quality filter, ensuring consistent availability for production and maintenance demands. Specification with recognised metrics and drive types allows easy inclusion into bills of materials and maintenance spares lists. Secure supply and expert advice from Metav Werkzeuge are available for this Teknik Makina fastener — contact our procurement team at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and lead times Technical Data SKU: TC058TM Thread: M2 Diameter: 2.8 mm Overall length: 4.2 mm Weight: 0.1 kg Angle: 60° Core measurements Diameter: 2.8 mm Length: 4.2 mm Thread size: M2 Angle: 60° Mass: 0.1 kg Features and compatibility Drive type: Torx Recommended tool: T6 key Brand: Teknik Makina Application: compact and precision assemblies FAQ What are the exact dimensions and thread of this screw? The Torx screw TC058TM is specified with an M2 thread, a shaft diameter of 2.8 mm and an overall length of 4.2 mm (SKU TC058TM from Teknik Makina). Which driver is recommended for installation? A T6 Torx key or driver is specified for secure engagement with the Torx drive, delivering improved torque transfer and reduced cam‑out during assembly. For which applications is this fastener suitable? This fastener is suitable for electronics enclosures, precision instruments and other compact assemblies where a low‑profile, reliable fixing is required. What is the supplied weight figure for this item? The product data provides a mass of 0.1 kg, which should be considered when planning inventory or packaging. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.7mm Torx Screw M2.5, 60° Head Angle - Teknik Makina
Compact M2.5 thread and 3.5 mm diameter provide secure fixing in confined assemblies; order the fastener via Metav Werkzeuge or consult our advisers for specification checks. Torx screw TC059-1TM — M2.5 thread, 3.5 mm diameter (Teknik Makina) The Torx screw TC059-1TM is a compact fastening component designed for precision assemblies and small-scale mechanical applications. M2.5 metric thread 3.5 mm diameter shank Overall length 4.7 mm 60° head angle Precise thread geometry for reliable clamping The compact metric M2.5 profile combines fine pitch with consistent engagement, which is ideal where a tight fit is required in small assemblies. The nominal 3.5 mm diameter offers an accurate seating diameter that reduces lateral play; this means repeatable alignment and reduced risk of micro-movement in precision components. Where a secure mechanical joint is required, the defined thread form ensures predictable torque-to-clamp behaviour and straightforward verification during assembly control. Drive and head design that supports efficient assembly The drive compatibility and head geometry are crafted for repeatable installation. The drive accepts a T8 key, enabling direct torque application with minimal slippage, which supports fast, controlled tightening in confined work areas. The 60° head angle is specified for conical seating in matching recesses, allowing the fastener to sit flush when required and reducing protrusion that might interfere with nearby components. These attributes reduce rework and contribute to faster, more reliable production cycles. Small size, broad industrial use and quality provenance As a small-format fastener, the component is suited to compact machinery, instruments and subassemblies where space is at a premium. The listed mass of 0.1 kg corresponds to the packaged unit as supplied; handling and storage are straightforward for workshop logistics. The part is supplied by Teknik Makina and is intended for consistent performance in repetitive assembly environments; traceable manufacturing and a clear article identity support quality control and inventory management. For batch enquiries, technical clarifications or to request an order for the Teknik Makina Torx screw TC059-1TM, contact Metav Werkzeuge in Emmerich for advice and specification verification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TC059-1TM Manufacturer: Teknik Makina eClass: 21189290 Dimensions & core data Diameter: 3.5 mm Thread: M2.5 Overall length: 4.7 mm Head angle: 60° Weight: 0.1 kg Versions & special features Drive compatibility: compatible with T8 key Intended use: compact precision fastening FAQ What are the main dimensions of this fastener? The Torx screw TC059-1TM from Teknik Makina has a 3.5 mm diameter, an M2.5 thread and an overall length of 4.7 mm. Which tool fits the drive of this screw? This fastener accepts a T8 key, as specified for TC059-1TM by Teknik Makina. What is the head geometry of the screw? The screw features a 60° head angle, allowing seating in conical recesses when installed. Is this screw suitable for small precision assemblies? Yes; the fine M2.5 thread and compact 3.5 mm diameter make the TC059-1TM suitable for precision subassemblies and confined installation spaces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.8mm Torx Screw M3.5 8.5mm Length 60° - Teknik Makina
Take advantage of precise metric threading and a compact head design for secure, space-saving fixings in production and maintenance environments; combine M3.5 thread reliability with Torx T10 drive efficiency for improved torque transfer and minimal cam‑out. Order the Torx screw TC069TM directly via Metav Werkzeuge or ask the consultants if needed Torx screw TC069TM – M3.5 thread, Torx T10 compatible (Teknik Makina) The Torx screw TC069TM is a compact fastener engineered for precision assemblies and workshop use, offering a robust Torx drive and a low-profile head for flush installation in tight spaces Torx drive T10 compatible M3.5 metric thread for standard fittings 4.8 mm head diameter for secure seating 8.5 mm total length for compact assemblies Consistent clamping with metric threading for industrial use The metric M3.5 thread delivers repeatable clamping performance across batch production and maintenance work, reducing variation in assembly torque and ensuring predictable joint behaviour. As a standardised specification, the M3.5 thread simplifies parts sourcing and inspection routines, supporting quality control processes and minimising downtime caused by mismatched fasteners. The design promotes reliable preload while remaining compatible with common metric toolsets used in workshops and small-scale manufacturing. Space-saving head and secure seating for flush assemblies With a 4.8 mm head diameter and a 60° head angle, the fastener provides a low-profile finish that seats cleanly into countersunk holes, producing a flush surface that prevents interference with moving parts or adjacent components. The Torx T10 interface enhances torque transfer, reducing cam‑out and allowing tighter, more consistent tightening without damage to the driver or head. This combination of compact geometry and drive reliability benefits applications where both aesthetics and mechanical clearance are important. Practical handling and workshop compatibility that speeds assembly The short 8.5 mm overall length makes the screw suitable for thin panels, instrument housings and precision fixtures where excessive thread engagement must be avoided. Compatibility with a Torx T10 driver streamlines assembly lines and on-site maintenance by using a common, high‑grip bit rather than slotted or Phillips alternatives. For procurement and inventory management, the clearly specified dimensions assist in creating unambiguous part lists and reduce the risk of assembly errors in production or repair contexts. For secure, repeatable fixings, choose the Teknik Makina Torx screw TC069TM and contact Metav Werkzeuge for ordering or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TC069TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg Head diameter: 4.8 mm Thread: M3.5 Total length: 8.5 mm Head angle: 60° Special features Torx T10 drive compatibility Compact, low‑profile head for flush seating Suited to precision assemblies and workshop applications ECLASS: 21189290 FAQ What driver is required for installation? The fastener is designed for a Torx T10 driver; the Torx interface provides improved torque transfer for reliable tightening of the TC069TM screw. What are the key dimensions to check for fit? Verify the 4.8 mm head diameter, M3.5 thread and 8.5 mm overall length to ensure correct seating and thread engagement for the application. Is this screw suitable for thin sheet metal and instrument housings? Yes — the short overall length and low‑profile head make the screw appropriate for thin panels and precision housings where a flush finish is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4mm Allen Key Hex Wrench, Steel - Teknik Makina
Take advantage of a compact, metric tool that combines 4 mm accuracy with a low weight of 0.1 kg for efficient workshop work; order the Allen key directly via Metav Werkzeuge or consult the specialists for advice. Allen key (hex key) – 4 mm compact metric tool by Teknik Makina A compact Allen key (hex key) designed for metric fasteners in general workshop and maintenance applications 4 mm metric hex key Compact, low weight at 0.1 kg Reliable workshop maintenance tool Manufactured by Teknik Makina Precise size and dependable fit for metric fasteners The compact 4 mm hex key delivers a precise engagement with standard metric hex sockets, reducing rounding and fastener wear during assembly and maintenance. Its modest mass of 0.1 kg contributes to easier handling in confined spaces and lowers operator fatigue during repetitive tasks. Where repeatable torque application is required, the consistent profile of the tool supports accurate force transfer to bolts and screws, which speeds up operations and reduces rework in small to medium production areas. The measurable dimensions make integration into tool sets straightforward. Practical design for everyday workshop efficiency Designed with accessibility in mind, this metric hex tool slips into recesses and angled fittings where bulkier spanners cannot reach. The compact format aids rapid tool changes and tidy storage, helping to streamline workflows on the bench or mobile service trolleys. Thanks to its simple geometry, the key is compatible with a broad range of maintenance tasks and light assembly work; its straightforward use reduces the need for specialist training. The result is a practical, space-saving implement that supports faster turnaround times and cleaner, safer workstations. Manufacturer quality combined with Metav’s dependable supply Produced under the Teknik Makina label and distributed through Metav Werkzeuge, this metric tool benefits from a clear supply chain and reliable stock handling. Metav’s position as a precision partner for workshops and industry ensures access to consistent product availability and a transparent ordering process from Emmerich. The combination of a focused tool specification and Metav’s quality filter for the European market provides procurement managers with a pragmatic solution for standard maintenance inventories and starter tool kits. Order the Teknik Makina 4 mm Allen key via Metav Werkzeuge for assured availability from Emmerich, or request guidance from our consultants to confirm suitability for specific applications Technical data Article number: 4ALLENTM Manufacturer: Teknik Makina Eclass: 21189290 Specifications Key size: 4 mm Weight: 0.1 kg Features Type: Allen key (hex key) System: Metric Application: Workshop and maintenance tool Brand: Teknik Makina FAQ What size is the Allen key? The Allen key supplied by Teknik Makina is 4 mm (SKU 4ALLENTM), suitable for standard metric hex fasteners. Is this tool suitable for workshop maintenance? Yes. The Teknik Makina Allen key (hex key, SKU 4ALLENTM) is intended for general workshop and maintenance tasks where a compact metric tool is required. How heavy is the key and is it portable? The Allen key (SKU 4ALLENTM) weighs 0.1 kg, making it lightweight and easy to include in handheld tool kits or bench sets. Will this key fit metric sockets and fasteners? The 4 mm metric profile of this Allen key from Teknik Makina is designed to engage standard metric hex sockets reliably. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5.3mm Torx Screw M3.5 8.5mm, 60° - Teknik Makina
Compact, space-saving fastening with a Torx drive and an M3.5 thread for reliable assemblies; combine secure engagement and precise dimensions for efficient production. Order this fastener directly via Metav Werkzeuge or consult our specialists for compatibility checks. Torx screw TC067TM — M3.5 thread, 8.5 mm length by Teknik Makina Torx screw TC067TM for compact mechanical assemblies, designed to deliver secure drive engagement and precise thread compatibility in confined spaces Torx drive for secure engagement Nominal diameter 5.3 mm Thread M3.5 standard Compact 8.5 mm total length Consistent torque transfer for dependable assembly results The Torx geometry is engineered to reduce cam‑out and provide improved torque transmission compared with slotted or Phillips drives. In practice this means assembly processes become more reliable and repeatable: a stable driver engagement reduces slip and wear on both tool and fastener; the combination of the Torx interface and the specified T15 matching key ensures a controlled transfer of force. For engineering teams this translates into fewer reworks and smoother production flow when fitting small components. Precision dimensions that save space and simplify design With a nominal diameter of 5.3 mm and a total length of 8.5 mm, the fastener is suitable for tight assemblies where clearance is limited. The external thread designated M3.5 conforms to standard metric sizing, enabling predictable mating with corresponding tapped holes or inserts. Designers benefit from the compact profile when specifying fastenings for enclosures, panels or small brackets, since predictable thread engagement and controlled head geometry support consistent clamping without excessive protrusion. Workshop efficiency and straightforward inventory management As a standardised metric fastener, the item streamlines procurement and tool selection across routine maintenance and assembly tasks. The relatively small mass (0.1 kg stated) aids logistics planning for storage and shipping bundles, while compatibility with the T15 driver reduces the number of specialised tools required on the workbench. Supplied under the Teknik Makina designation, the component is intended as a practical choice for small‑part assembly where standardisation and accessibility are priorities. Proven supply and service through a trusted partner Sourcing through Metav aligns the technical benefits of the fastener with dependable distribution and quality control. Metav’s role as a “quality filter” for the European market means buyers gain access to consistent stock, product verification and a broad range of workshop supplies alongside measurement and tooling solutions. This combination of a reliable feed of standard parts and technical consultancy supports long‑term operational stability in manufacturing and maintenance settings. For availability and order details of the Teknik Makina Torx screw TC067TM, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for precise product information and stock status Technical Data Article number: TC067TM Manufacturer: Teknik Makina eCl@ss: 21189290 Core technical data Weight: 0.1 kg Diameter: 5.3 mm Thread: M3.5 Total length: 8.5 mm Head angle: 60° Features Drive type: Torx Suitable key: T15 Brand: Teknik Makina FAQ What driver fits this screw most effectively? The screw is designed for a Torx drive and is compatible with a T15 Torx key for optimal engagement. Which thread standard does the fastener use? This fastener uses an M3.5 metric thread suitable for corresponding tapped holes and standard inserts. What are the primary dimensions to consider during design? Key dimensions are a nominal diameter of 5.3 mm, a total length of 8.5 mm and a head angle of 60°, which help define clearance and engagement depth. Is this part a Teknik Makina product and what is the SKU? Yes — the item is listed under Teknik Makina and is supplied as TC067TM. For which kinds of assemblies is this fastener appropriate? The component is intended for compact mechanical assemblies and small fittings where a secure Torx drive and short overall length are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5.5mm Torx Screw M4 12.5mm Overall Length 60° Head Angle - Teknik Makina
Take advantage of secure fastening, a compact 12.5 mm length and standard M4 thread for reliable, space-saving assemblies; order the fastening solution directly via Metav Werkzeuge or consult the advisors for specification support. Torx screw TC076TM by Teknik Cutting Tools — M4 thread, 12.5 mm length The Torx screw is a compact fastening element designed for precision assemblies and confined fittings in mechanical and electronic applications Secure Torx drive for high torque transmission M4 metric thread for standard assembly fittings Compact 12.5 mm length for confined spaces 60° countersink angle for flush seating Precise fastening that prevents cam‑out and loosening The Torx drive design provides reliable engagement between driver and head, which reduces the risk of cam‑out under torque and improves assembly consistency. With an M4 thread and a 12.5 mm length, this fastener suits shallow joins and small fixtures where predictability matters. The combination of a narrow 5.5 mm diameter head and a 60° countersink angle enables neat, flush mounting in thin materials, improving both function and appearance while simplifying post‑assembly processes. Installation benefits and recommended tooling Installation is optimised for workshop efficiency: the fastener is intended for a T15 driver, ensuring correct bit fit and repeatable torque application. Using the correct driver reduces wear on both tool and fastener and contributes to faster cycle times on assembly lines or during repair work. The Torx geometry also supports higher torque transfer compared with slotted or Phillips heads, which is particularly useful for assemblies that demand secure clamping without over‑stress. Designed for compact and precise assemblies As a compact fastener, this component is well suited to instruments, enclosures and mechanical fixtures where space is limited and tolerances are tight. The controlled geometry of the head and thread supports consistent seating and reduces the need for rework. Lightweight and unobtrusive, the item helps maintain the design integrity of delicate housings and small machines while delivering the mechanical security expected in professional settings. Supply reliability and provenance assurance Sourced from Teknik Cutting Tools and offered via Metav Werkzeuge, the fastener benefits from a distribution channel that emphasises availability and quality assurance. Metav’s approach to making precision accessible for workshops ensures that such components are supported by clear stock information and fast order processing, helping to keep production lines moving and maintenance work on schedule. For technical queries, batch requirements or advice on using Teknik Cutting Tools Torx screws in specific assemblies, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 to arrange precise supply and specification support Technical data Article number: TC076TM Manufacturer: Teknik Makina ECLASS: 21189290 Weight: 0.1 kg Measurements Thread: M4 Diameter: 5.5 mm Total length: 12.5 mm Countersink angle: 60° Design & compatibility Drive: Torx Recommended driver: T15 driver Product type: Torx screw FAQ What driver is required to tighten this screw? The Torx screw TC076TM is designed for a T15 driver, which ensures correct engagement and consistent torque transfer during assembly. Will this screw sit flush in a countersunk hole? Yes, the TC076TM features a 60° countersink angle, allowing it to seat flush in appropriately prepared countersunk holes for a neat finish. What thread size does the fastener use? The TC076TM uses an M4 metric thread, making it compatible with standard M4 threaded components and inserts. Where is this fastener typically used? The Teknik Cutting Tools Torx screw TC076TM is intended for precision assemblies such as small enclosures, instrument housings and mechanical fixtures where compact, secure fastening is required. What are the head diameter and overall length of the screw? The TC076TM has a head diameter of 5.5 mm and a total length of 12.5 mm, designed for confined spaces and shallow material thicknesses. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5.5mm Torx Screw M4 60° Head, Inbus Key T15 - Teknik Makina
Take advantage of a secure Torx connection and standard M4 threading for consistent assembly performance; the combination of a Torx head, a nominal 5.5 mm diameter and a defined 60° head geometry supports reliable torque transfer and repeatable fastening — order via Metav Werkzeuge or contact the consultants for specification advice. Torx screw TC073TM — M4 thread, 5.5 mm nominal diameter by Teknik Makina Torx screw TC073TM designed for secure mechanical fastening in industrial and workshop assemblies, suitable for standard metric fittings and driven with a Torx T15 tool Secure Torx head for high torque M4 metric thread for standard fittings 5.5 mm nominal diameter Requires Torx T15 driver High torque retention and reduced cam‑out for efficient assembly The Torx head geometry delivers superior torque transmission compared with slotted or Phillips profiles, which reduces the risk of cam‑out during tightening. Combined with the M4 thread, this fastener ensures consistent clamping force in light to medium duty assemblies; the specified 5.5 mm nominal diameter is matched to the thread form to provide stable engagement. The listed 60° head angle contributes to controlled seating where a countersunk finish is required, allowing a flush appearance and predictable load distribution. These characteristics translate directly into fewer rework cycles and faster cycle times on repetitive assembly tasks. Practical compatibility and workshop handling benefits The fastener is prepared for standard workshop tooling: a Torx T15 driver fits the head profile for rapid insertion and secure torque application. The item is compact and of low listed mass (0.1 kg), aiding handling and reducing shipping bulk when small quantities are required. Because the design focuses on mechanical reliability rather than decorative finishes, the component integrates well with maintenance procedures and retrofit operations where metric thread conformity and repeatable torque behaviour are priorities. Clear driver selection and standard threading simplify inventory management across production and service departments. Sourcing and application confidence for industrial users Produced by Teknik Makina, the component matches expectations for a basic, reliable threaded fastener for industrial use. The specification supports applications in jigs, fixtures, enclosure assemblies and general workshop repairs where a dependable metric fastener is required. Procuring through Metav places this component within a broader supply chain advantage: centralised access to precision tools and fasteners, steady stock levels and transparent order processing from Emmerich. The result is a practical balance of availability and specification conformity that helps to keep production lines and maintenance bays moving. For fast, reliable procurement of Teknik Makina fasteners such as the Torx screw TC073TM and personalised technical guidance, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and ordering assistance Technical data Article number: TC073TM Manufacturer: Teknik Makina ECLASS: 21189290 Core specifications Diameter: 5.5 mm Thread: M4 Overall length: 1 Weight: 0.1 kg Materials & features Head angle: 60° Driver compatibility: Torx T15 SKU: TC073TM FAQ What driver is required for this screw? The Torx screw TC073TM is specified for a Torx T15 driver to ensure correct engagement and torque transfer. What thread standard does the fastener use? This threaded fastener is supplied with an M4 metric thread suitable for standard metric mating threads. Is the head geometry suitable for flush mounting? Yes, the indicated 60° head angle supports countersunk seating for a flush finish in compatible components. Can this fastener be used in maintenance and retrofit work? The TC073TM by Teknik Makina is intended for general workshop and industrial applications where a reliable metric fastener and Torx drive are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5.5mm Torx Screw M4, 60° Head Angle - Teknik Makina
Take advantage of a compact, reliable fastening solution that combines a standard M4 thread with a 7 mm overall length for shallow assemblies, a 5.5 mm head diameter for consistent seat, and a Torx T15 drive for reduced cam‑out and predictable torque behaviour; order via Metav Werkzeuge or consult our specialists for batch supply and application advice Torx screw TC074TM (M4 x 7 mm, Torx T15) — Teknik Makina A Torx screw TC074TM designed for precise, repeatable fastening in general assembly and workshop applications where a T15 driver is used M4 thread for standard fastenings Short 7 mm length for confined assemblies Torx T15 drive reduces cam‑out risk 60° seat angle for reliable countersinking Secure fastening with consistent torque and fit This compact fastener provides a M4 thread combined with a 7 mm overall length and a 5.5 mm head diameter, delivering a predictable clamping result in small or shallow assemblies. The Torx T15 drive form reduces slippage and enables higher applied torque than comparable cross‑head types, which translates into fewer damaged heads and fewer reworks. For engineers specifying fixings in jigs, housings or light assemblies, the combination of thread dimension and short shank offers a neat balance between holding performance and minimal protrusion. Easier installation and clean countersinking for finishing The 60° seat angle ensures a clean, flush finish when paired with a matching countersink, improving load distribution and aesthetic appearance at the joint. Compatibility with a T15 key or driver bit makes assembly straightforward with standard hand or powered drivers, enabling faster cycle times on repetitive tasks. The fastener’s compact mass (listed as 0.1 kg) suits small parts production and reduces handling bulk for loose packs; the drive geometry also helps reduce operator fatigue during batch assembly by lowering the need for corrective actions. Supply reliability and why this choice supports workflow continuity Sourced from Teknik Makina, this Torx screw is supplied through Metav Werkzeuge’s logistics in Emmerich, combining manufacturer expertise with a European distribution filter that supports steady availability for industry and trade. Choosing this fastener helps simplify procurement for workshops and production lines that require standardised, repeatable fixings. Metav’s broad product range and established stock management reduce supplier multiplicity while offering traceable quality for repeat orders and project planning. For reliable procurement of Teknik Makina fasteners such as the TC074TM Torx screw, contact Metav Werkzeuge GmbH in Emmerich for batch availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TC074TM Manufacturer: Teknik Makina EClass: 21189290 Facts Thread: M4 Diameter: 5.5 mm Overall length: 7 mm Seat angle: 60° Weight: 0.1 kg Special features Drive: Torx T15 (compatible with T15 key) Short shank for confined assemblies Countersunk seat geometry FAQ What thread size does this screw use? The Torx screw TC074TM features an M4 thread suitable for standard metric threaded holes and inserts. Which driver is required to install this fastener? Installation is performed with a T15 Torx driver or compatible T15 key; the TC074TM is optimised for Torx engagement to reduce cam‑out. Is the head suitable for countersunk installation? Yes, the fastener has a 60° seat angle intended for flush countersinking and even load distribution in finished assemblies. What are the length and head dimensions? The TC074TM has an overall length of 7 mm and a head diameter of 5.5 mm, designed for compact, low‑profile joints. Which applications suit this Torx screw? This fastener is appropriate for light mechanical assemblies, enclosures, fixtures and where a reliable, tamper‑resistant head engagement is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.8mm Screw For End Mill, M4 Thread, 9mm Length - Teknik Makina
Take advantage of the M4 thread and compact 5.8 mm diameter for secure clamping and straightforward installation; benefit from consistent toolholding in confined setups and consult Metav Werkzeuge for ordering or technical advice. Screw TC172TM for End Mill — M4 thread, 5.8 mm diameter (Teknik Makina) The Screw TC172TM is a compact clamping screw designed to secure end mills in tight tool-holder assemblies, offering a small footprint and simple hex-key assembly for reliable tool retention. M4 threaded clamping screw 5.8 mm outer diameter 9 mm total length Requires hex key T15 Reliable clamping that reduces runout and rework The central advantage of the fastener lies in its M4 thread, which provides repeatable axial force and stable retention during milling operations. Consistent clamping reduces micro-movement of the cutting tool, thereby lowering the risk of tool chatter and premature wear. This stability supports process reliability and helps maintain dimensional accuracy on workpieces, so fewer reworks are necessary and cycle-time consistency improves. Space-saving dimensions for compact tool stations With an outer diameter of 5.8 mm and a 9 mm total length, the component is optimised for setups where space is limited. The compact profile enables use in close-packed tool arrangements and multi-tool fixtures without interfering with adjacent holders or cutters. Such a small form factor supports flexible tooling layouts and can simplify retrofitting into existing spindles or adapters where clearance is critical. Simple assembly and workshop compatibility for faster changeovers Assembly requires a T15 hex key, a common size in workshop toolkits, which makes installation and removal quick and predictable. The lightweight construction (listed weight 0.1 kg) and standardised thread and drive type reduce the need for specialised tools and spare parts inventory. For maintenance planners and toolroom managers this translates into shorter tool-change times and lower operational friction in everyday machining routines. For purchasing and tailored technical guidance on Teknik Cutting Tools components such as the Screw TC172TM, contact Metav Werkzeuge — quick delivery and expert advice are available from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TC172TM Designation: Screw for end mill Manufacturer: Teknik Makina ECLASS: 21189290 Facts Diameter: 5.8 mm Thread: M4 Total length: 9 mm Weight: 0.1 kg Special features Requires hex key T15 Intended for securing end mills Compact clamping geometry FAQ Is this screw suitable for standard end mills? The Screw TC172TM is designed specifically for securing end mills and is compatible with common tool-holder geometries where an M4 clamping screw is specified. Which tool is required to install the screw? Installation and removal are performed with a T15 hex key, a standard workshop tool compatible with this clamping screw. What are the key dimensions to check before ordering? Confirm the 5.8 mm diameter, M4 thread and 9 mm total length match the tool-holder or adapter specification; these are the critical dimensions for compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5mm Allen Key Hex Wrench, Steel - Teknik Makina
Take advantage of a compact, reliable tool that combines 5 mm accuracy with easy handling to keep assembly and maintenance tasks moving smoothly; lightweight construction at 0.1 kg reduces operator fatigue and supports fast, repeatable tightening. Order directly via Metav Werkzeuge or consult our team for specific workshop applications. Allen key (5 mm) — compact hex key for workshop fastening, Teknik Makina The Allen key is a compact hex wrench designed for precise fastening in assembly, maintenance and general workshop applications Compact 5 mm hex key for precise fastening Lightweight: only 0.1 kg for easy handling Robust workshop tool by Teknik Makina Precision fastening where space is limited The compact 5 mm shaft and hex profile enable accurate torque transfer for small fasteners, making this tool suitable for confined or recessed fixings. Its minimal profile supports access to tight joints while the standard hex geometry ensures consistent contact with the fastener head, reducing cam‑out and rounding. The emphasis is on precision and repeatability, so routine assembly and maintenance cycles remain efficient and traceable with every twist. Practical design for efficient workshop use A lightweight tool at 0.1 kg, this hex key reduces hand fatigue during repetitive operations and speeds up small‑part assembly tasks. The simple form factor eliminates unnecessary bulk on the workbench and integrates well with existing tool sets. By favouring straightforward geometry over complex mechanisms, the tool promotes a low‑maintenance workflow that aligns with lean workshop practices and reliable day‑to‑day performance. Easy handling, storage and trusted provenance The compact profile supports tidy storage and rapid retrieval from tool boards or racks, improving process flow between jobs. Supplied under the Teknik Makina label, this hex key benefits from a clear, production‑orientated design suited to industrial and trade environments. The focus remains on dependable operation and practical usability, providing craftsmen and technicians with a straightforward, compact design that complements precision tool collections. Consider the Teknik Cutting Tools 5 mm Allen key for consistent small‑fastener work — contact Metav Werkzeuge for availability and application advice Technical Data Article number: 5ALLENTM Designation: Allen key Size indication: 5 Facts Weight: 0.1 kg ECLASS: 21189290 SKU: 5ALLENTM Special features Tool type: Allen key (hex key) Brand: Teknik Makina Compact form for confined spaces FAQ What size is the tool and what does it fit? The tool is a 5 mm Allen key; it fits fasteners with a 5 mm internal hex profile and is intended for small assembly and maintenance tasks. Is the Allen key suitable for workshop and industrial applications? Yes, the 5 mm hex key from Teknik Makina is designed for workshop use and repetitive fastening where a compact, reliable hex wrench is required. How heavy is the tool and does it aid repetitive work? Weighing approximately 0.1 kg, the Allen key reduces hand fatigue during repetitive operations while maintaining secure contact with the fastener. Can the 5ALLENTM be integrated into a standard tool set? The 5ALLENTM Allen key is compact and designed for easy storage on tool boards or in sets, making it straightforward to add to existing collections. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com