150mm U Washer, Steel - Teknik Makina
Take advantage of a simple, robust component that improves assembly reliability and streamlines stockkeeping: the compact geometry offers secure load distribution while the low mass supports efficient handling and transport. Order directly via Metav Werkzeuge or consult the team for specification matching. U-washer BSP032TM — U-shaped fastening washer, compact and dependable (Teknik Makina) U-washer BSP032TM is a U-shaped fastening washer intended for general assembly and maintenance tasks in workshops and light industrial applications Robust U-shaped geometry for secure fastening Lightweight component, weight 0.1 kg Compatible with common fastening systems Proven reliability for routine fastening tasks The U-washer offers a straightforward mechanical solution where a washer must engage around a shaft or bolt without full enclosure. Its U-shaped geometry distributes clamping forces more evenly than a bare fastener, reducing localised stress and helping to maintain joint integrity during vibration or thermal cycling. This design is particularly useful in repetitive assembly operations where consistent performance is required and downtime must be minimised. The description focuses on the washer's functional contribution to a reliable connection rather than decorative aspects. Practical benefits for workshop workflows With a nominal weight of 0.1 kg, this component is easy to handle and store, making it suitable for lean inventory systems and accelerated pick-and-place assembly lines. The washer's form factor supports rapid fitting and removal, which can contribute to shorter assembly times and fewer interruptions on the production floor. As the piece is compatible with common fastening systems, it fits into existing tool sets and maintenance procedures without extensive adaptation, helping to keep the process efficient and predictable. Supply assurance and traceable origin Manufactured by Teknik Makina, the washer is supplied through Metav's distribution in Emmerich, where every shipment passes a practical quality filter for the European market. Metav's experience in precision tooling and workshop equipment means deliveries are supported by technical advice and reliable logistics. The combination of established production and a dependable supply chain provides a pragmatic basis for specifying this component in standard assemblies or as a recurring replenishment item. For delivery options and application advice on the Teknik Cutting Tools U-washer (SKU BSP032TM), contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss lead times and suitability for the intended assembly. Technical data SKU: BSP032TM ECLASS: 21189290 Weight: 0.1 kg Facts Designation: U-washer Manufacturer: Teknik Makina UID: BSP032TM Special features U-shaped fastening washer Intended for general workshop and assembly use Supplied via Metav Werkzeuge distribution FAQ What is the primary function of this washer? The Teknik Makina U-washer (SKU BSP032TM) serves to distribute clamping force and support secure fastening where a standard flat washer may not fit or where lateral engagement is required. Can this washer be used in vibration-prone assemblies? Yes, the U-shaped geometry of this washer helps to maintain joint stability under vibration by improving load distribution, though final suitability should be judged against the assembly's specific dynamic conditions. How should this washer be stored in a workshop environment? Store the washers in a dry, organised bin system close to the assembly point to benefit from the component’s lightweight nature and to reduce retrieval time during production. Is technical advice available for integrating this washer into a production line? Technical guidance is available through Metav Werkzeuge; discuss the application and assembly requirements to ensure the BSP032TM washer aligns with the intended fastening system. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm U-Plate CCMT 09 Compatible - Teknik Makina
Take advantage of a compact, CCMT 09‑compatible mounting solution that combines space-saving design with straightforward integration for faster setups; order the U-plate directly via Metav Werkzeuge or consult our specialists for application advice. U-plate – Compact mounting plate with CCMT 09 compatibility by Teknik Makina The U-plate is a compact mounting plate intended for workshop fixture use and designed for compatibility with CCMT 09 turning inserts. Compatible with CCMT 09 inserts Compact, lightweight 0.1 kg Space-saving workshop mounting Easy integration in fixture setups Guaranteed fit with common turning inserts for faster setup The U‑plate is specified for use with CCMT 09, an established turning insert designation, which ensures a standardised interface and predictable alignment in lathe and fixture assemblies. By matching the common insert geometry, the mounting plate reduces adjustment time during tool changes and supports repeatable positioning. For workshops that rely on quick changeovers, this compatibility translates into measurable time savings and fewer alignment checks between operations. Small footprint and low handling weight for efficient workflows Weighing just 0.1 kg, the plate offers a genuinely lightweight solution where every gram and millimetre of bench space counts. The minimal mass simplifies handling during fixture assembly and makes storage and transport less cumbersome between workstations. Its compact form factor is particularly useful in confined setups or mobile tool trolleys, where bulkier components would otherwise impede efficient organisation and access to cutting tools. Integration-focused design that supports practical workshop routines Designed as a simple, reliable element in clamping and mounting arrangements, the U‑plate streamlines the interface between inserts and holding devices. The uncomplicated geometry supports rapid installation into existing setups and reduces the likelihood of assembly errors, promoting steady throughput across repetitive tasks. Where material or coating specifications are required for specialised applications, the available product data does not specify these properties; for such cases consult the technical datasheet or product documentation before specifying for corrosive or high‑wear environments. For a compact, CCMT 09‑compatible mounting solution from Teknik Makina, contact Metav Werkzeuge to arrange supply or technical clarification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TA015TM Name: U-plate Manufacturer: Teknik Makina Facts Weight: 0.1 kg eCl@ss: 21189290 Special features Suitable for: CCMT 09 FAQ What turning inserts does the U-plate fit? The U-plate is specified for compatibility with CCMT 09, making it suitable for setups that use this standard insert geometry and simplifying insert interchangeability. How much does the plate weigh and what is the practical benefit? With a weight of 0.1 kg, the plate is extremely lightweight, which eases handling, storage and fitting during frequent tool or fixture changes. Is the plate suitable for confined workbench spaces? Yes — the compact design and low mass make the U-plate well suited to small workstations and mobile tool trolleys, where space efficiency is important. Are material and coating details available for the U-plate (TA015TM)? The provided product data for TA015TM does not list material or coating; consult the technical documentation for full construction details before use in specialised environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate CCMT 12 Compatible, Zinc-Plated - Teknik Makina
Take advantage of a compact, precision-oriented solution that combines reliable compatibility with CCMT 12 inserts and a very low handling weight for faster set-ups; the compact design supports efficient changeovers and steady workshop routines. Order the U-plate directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. U-plate TA015-1TM — compact mounting plate, compatible with CCMT 12 inserts (Teknik Makina) The U-plate TA015-1TM is a compact mounting plate intended for use in workshop and light industrial tool setups where compatibility with CCMT 12 inserts is required, providing a simple way to standardise small tooling interfaces. Compact mounting plate for tool holders Compatible with CCMT 12 inserts Lightweight: 0.1 kg for easy handling Durable design for regular workshop use Faster set-ups through precise compatibility The mounting solution has been designed to deliver consistent positioning where repeatability matters. By matching the established CCMT 12 insert form factor, the plate reduces alignment guesswork and supports predictable tool behaviour during short changeovers. This compatibility translates into measurable time savings at the workbench: fewer adjustments, shorter downtime and a clearer process for tool replacement. The emphasis on precision ensures that setups remain stable across multiple cycles, so single-point benefits—reduced set-up time and improved process reliability—are obtained without complex procedures. Light weight that eases handling and reduces cycle interruptions At only 0.1 kg, the component improves manual handling and speeds up routine operations. The low mass reduces the effort required when changing small assemblies, which helps to lower the physical strain on staff during repeated interventions and shortens the time taken per exchange. For production environments where many small adjustments are performed daily, a lightweight solution supports leaner workflows and contributes directly to operator efficiency. The combination of minimal weight and practical form makes the item suitable for tight workspaces where agility and quick reconfiguration are required. Workshop-ready design that integrates into standard tool chains This plate is intended for straightforward incorporation into standard tooling arrangements that accept the CCMT family of inserts, offering a pragmatic option for workshops seeking simple, repeatable interfaces. The product supports routine machining and finishing tasks that depend on predictable insert seating. As part of a broader supply chain, the item complements efforts to reduce vendor complexity by choosing components that align with common industry formats. Where clarity on fit or application is required, the provenance and distribution from established partners lend further assurance of consistent quality. For reliable CCMT 12 compatibility and minimal handling weight, choose the Teknik Makina U-plate TA015-1TM via Metav Werkzeuge — contact Metav Werkzeuge for product availability and procurement details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TA015-1TM SKU: TA015-1TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg ECLASS: 21189290 Special features Compatible with CCMT 12 Lightweight mounting plate FAQ What inserts is this plate compatible with? The U-plate TA015-1TM is compatible with CCMT 12 insert formats and intended to interface with holders designed for that family. How heavy is the component and how does that affect handling? The item weighs 0.1 kg, a low mass that simplifies manual handling and speeds up changeovers in high-frequency operations. Is the plate suitable for regular workshop use? The plate is designed for regular workshop environments where standard CCMT insert compatibility and repeatable seating are required. Which manufacturer produced this mounting plate? The mounting plate is supplied by Teknik Makina and listed under SKU TA015-1TM for identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate CNMG 12 Compatible - Teknik Makina
Take advantage of a lightweight, CNMG 12-compatible mounting plate that improves toolholding consistency and reduces fixture mass for faster tool changes; its small form factor and reliable build make it suitable for compact turning setups. Order the U-plate directly via Metav Werkzeuge or ask our consultants if clarification is needed. U-Plate — Compact mounting plate for CNMG 12 inserts by Teknik Makina A U-Plate from Teknik Makina designed for secure mounting of CNMG 12 turning inserts in space‑constrained toolholding applications. Lightweight 0.1 kg mounting plate Compatible with CNMG 12 inserts Robust build by Teknik Makina Compact design for tight toolholders Greater efficiency through lower mass and fast handling The mounting plate reduces rotating or handling mass thanks to its 0.1 kg weight, which supports quicker setup and reduced inertia in fixtures. For production environments where cycle time and repeatability are important, the lightweight construction contributes to faster tool changes and easier positioning. The design focuses on practical benefits: less fixture mass and reliable seating for insert interfaces, improving throughput without introducing complex procedures. Clear compatibility for predictable machining results Compatibility with CNMG 12 inserts is indicated directly in the specification, providing a clear, technical basis for selection in turning tool assemblies. The plate serves as a dedicated adapter in clamping systems where standard triangular inserts of the CNMG geometry are used. Technical teams benefit from simple integration: the known insert format reduces setup questions and streamlines toolholder selection, supporting consistent machining results across batches. Robustness that supports workshop reliability Although compact, the plate is manufactured to withstand regular workshop use; its Teknik Makina origin signals a component intended for industrial service. The emphasis is on stable seating and repeatable alignment rather than decorative finish, so the primary advantages are operational: consistent interface behaviour and durable contact surfaces. This focus on functional durability reduces rework and supports predictable maintenance intervals for tool assemblies. Practical fit for constrained toolholders and retrofits The compact footprint makes the plate suitable where space is limited or when retrofitting existing holders to accept CNMG 12 inserts. The straightforward geometry allows integration without major modifications to the surrounding tooling, enabling an efficient path to upgrade or adapt existing setups. Technical documentation and SKU identification simplify purchasing and inventory tracking for production managers. Confidence with European supply and specialist distribution Sourcing via a specialist distributor provides logistical advantages for industrial customers: stock management, centralised ordering and a quality filter at the regional hub. Relying on established distribution channels ensures a consistent supply of this utility component so production planning remains dependable. The combination of a focused design, clear compatibility and reliable distribution supports effective toolroom operations. For reliable mounting of CNMG 12 inserts, choose the Teknik Makina U-Plate and contact Metav Werkzeuge for procurement and expert supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for guidance and rapid processing Technical data Article number: TA016TM Product name: U-Platte / U-Plate Manufacturer: Teknik Makina Facts Weight: 0.1 kg eCl@ss: 21189290 SKU: TA016TM Special features Compatibility: CNMG 12 Compact mounting plate design Intended for insert mounting applications FAQ Is the plate compatible with CNMG 12 inserts? Yes. The U-Plate (SKU TA016TM) is specified for use with CNMG 12 inserts and is intended to provide a secure mounting interface for that insert geometry. What is the weight of the mounting plate? The Teknik Makina U-Plate has a weight of 0.1 kg, which supports lower fixture mass and easier handling during tool changes. Can the plate be used in tight toolholder spaces? The plate’s compact design is suited to constrained toolholder environments and retrofits where minimal footprint is required for insert mounting. Who supplies this part for European workshops? The U-Plate is distributed via Metav Werkzeuge for the European market, providing centralised supply and warehouse support from Emmerich. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate CNMG 12 Compatible, 0.1kg - Teknik Makina
A compact, lightweight mounting solution that combines a precision fit with straightforward integration into existing tool setups; compatibility with CNMG 12 ensures interchangeability with common insert systems and reduces set-up time. The plate's low mass and concise footprint support quicker handling and safer storage. Order the U-Plate directly via Metav Werkzeuge or ask our consultants if needed. U-Plate TA016-1TM – compact mounting plate, compatible with CNMG 12 (Teknik Makina) The U-Plate is a compact mounting plate designed to provide a reliable interface for CNMG 12-compatible applications, offering straightforward integration into workshop fixtures and clamping assemblies Compact U-plate, space-saving design Compatible with CNMG 12 inserts Lightweight: 0.1 kg for easy handling SKU TA016-1TM for quick reference Faster set-ups through precise compatibility The U-Plate was developed to deliver a precision fit with CNMG 12-compatible components, which helps to reduce alignment time during tool changes. A predictable locating interface minimises iterative adjustments and supports consistent positioning in serial operations. For production environments where process time is critical, reliable interchangeability translates into measurable efficiency gains and fewer stoppages caused by misalignment. Easier handling and ergonomic advantages With a mass of just 0.1 kg, the plate is noticeably lightweight, simplifying manual handling during assembly and storage. The low weight reduces strain during repeated tool changes and supports faster fixture reconfiguration on the shop floor. Where operators are required to change components frequently, a compact, low-mass plate improves workflow ergonomics and contributes to a steadier, safer handling routine. Straightforward identification and workshop integration Marked as TA016-1TM, the component is prepared for quick identification in inventory systems and for seamless integration into existing fixtures. Produced by Teknik Makina, the plate suits environments where compact mounting solutions are preferred and where CNMG 12 compatibility is required. Clear SKU labelling and a minimal footprint assist in orderly storage and rapid retrieval, supporting clean, efficient workshop processes. For specification checks, availability or to request order information contact Metav Werkzeuge in Emmerich and quote SKU TA016-1TM for rapid assistance Technical data Article number: TA016-1TM Name: U-Plate Manufacturer: Teknik Makina eClass: 21189290 Facts Weight: 0.1 kg ECLASS: 21189290 Special features Compatible with CNMG 12 SKU: TA016-1TM FAQ What is the primary application of this plate? The U-Plate TA016-1TM is intended as a compact mounting plate for setups that require compatibility with CNMG 12-aligned components and simple fixture integration. What is the weight of the component? The plate has a weight of 0.1 kg, which supports easy manual handling and quick tool changes. Is the plate compatible with insert systems other than CNMG 12? The available product data specifies compatibility with CNMG 12; compatibility with other insert systems is not listed in the provided information. How is the product identified in stock and documentation? Identification is via SKU TA016-1TM and the designation U-Plate, enabling fast lookup in inventory and ordering systems. What material is the plate made from? Material information is not specified in the supplied product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate CNMG 19 Compatible, 0.1kg - Teknik Makina
Compact compatibility with CNMG 19 inserts and a featherlight mass of 0.1 kg make this U plate a practical choice for streamlined tool set-ups; its clear SKU reference (TA017TM) simplifies procurement and stock control. Order directly via Metav Werkzeuge or consult their specialists for application advice. U plate – support plate for CNMG 19 inserts (Teknik Makina) U plate designed as a compact support plate for CNMG 19 indexable inserts in turning tool assemblies Compatible with CNMG 19 inserts Lightweight design — 0.1 kg Teknik Makina production quality SKU TA017TM for easy ordering Efficient compatibility for turning applications The U plate is specified for use with CNMG 19 indexable inserts, offering a concise solution for workshops and production lines that standardise on this insert geometry. Compatibility with a recognised insert grade ensures predictable seating and clamping behaviour, which in turn reduces set-up time and minimises unexpected tool changes. By referencing TA017TM at purchase, procurement teams obtain a clear article identifier for inventory systems and reordering. Practical handling and workshop integration At just 0.1 kg, this support plate is simple to position and handle during tool assembly changes, allowing faster tool swaps and less operator fatigue in repetitive processes. The compact mass supports modular toolholder strategies where quick replacement and balanced tool assemblies are priorities. Clear labelling and the SKU help with storage allocation and traceability within a central parts bin at the workbench, contributing to seamless workflow integration. Proven supply and dependable documentation Supplied by Teknik Makina and offered through Metav's distribution, the component benefits from a transparent supply chain and straightforward ordering. The concise technical identity — compatibility, SKU and weight — aids maintenance planning and spare-parts stocking. For specifications not listed in the basic data, Metav Werkzeuge can provide additional technical documentation or clarification to ensure the plate meets the intended turning application. How this part supports production efficiency Using a dedicated support plate for a specific insert type simplifies standardisation across multiple lathes or cellular workstations, reducing the variety of spare components required. A clear article reference (TA017TM) streamlines procurement and reduces the risk of incorrect parts being issued. This focused approach helps maintain uptime and supports consistent component replacement procedures, contributing to reliable output and easier process control. For CNMG 19-compatible tool assemblies from Teknik Makina, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical Data Article number: TA017TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 Special features Suitable for CNMG 19 inserts Compact support plate for tool assemblies Supplied via Metav Werkzeuge distribution network FAQ What insert type is this plate intended for? This support plate is intended for use with CNMG 19 indexable inserts; the product is listed under SKU TA017TM for clear identification. Is the exact material specified for the plate? The material is not specified in the provided data; for material details and mechanical properties, please request technical documentation from Metav Werkzeuge or Teknik Makina. How does the 0.1 kg weight benefit workshop operations? A weight of 0.1 kg eases manual handling during tool changes and supports faster assembly swaps, improving ergonomic handling and reducing downtime. Can this plate be used across different toolholders? The plate is described as compatible with CNMG 19 inserts; compatibility with specific toolholders depends on the holder design and mounting arrangements—verify fitment with Metav Werkzeuge using SKU TA017TM. Is there a clear article reference for procurement systems? Yes, the article number TA017TM provides a unique identifier for ordering and stock management through Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate DCMT 11 Compatible, 0.1kg - Teknik Makina
Take advantage of the compact compatibility and lightweight design for seamless integration into precision measuring setups; the combination of dependable TekniK Makina manufacturing and clear SKU identification ensures fast procurement and traceability. Order the U-plate directly via Metav Werkzeuge or ask the Metav consultants for application support. U-plate TA030TM — Caliper accessory, compatible with DCMT 11 by Teknik Makina The U-plate is a compact caliper accessory designed for simple integration into metrology routines, primarily intended for applications where a small, identifiable fitting for DCMT 11 calipers is required. Compact accessory for DCMT 11 calipers Lightweight 0.1 kg for easy handling Teknik Makina manufacturing quality SKU TA030TM for quick identification Faster, more reliable measuring set-ups with compact alignment The compact construction of this caliper accessory reduces handling time and supports consistent measuring workflows. By providing clear compatibility with DCMT 11 calipers and a concise identifier (SKU TA030TM), the accessory simplifies inventory management and tool station layout. The low mass (0.1 kg) reduces inertia when placing or removing the fitting, which means less adjustment time during repetitive measuring tasks. For workshops and inspection benches where efficiency matters, the combination of compatibility and traceability contributes directly to fewer interruptions and a smoother measurement process. Simple integration and clear traceability for workshop logistics Integration into a metrology bench is streamlined by the accessory’s explicit suitability for a defined caliper type. The labelling and SKU make it straightforward to allocate the part within tool cabinets and digital inventories, reducing the risk of misplacement. As an accessory from Teknik Makina, the part benefits procurement channels that value standardised components; replacement and restocking decisions are faster when identification is unambiguous. Clear part identification also assists calibration cycles and internal audits, since the item can be tracked across quality-control records without ambiguity. Built for dependable everyday use in measurement contexts While compact, the fitting is intended for routine use in industrial metrology and workshop environments where repeatability and predictable performance are required. The accessory’s design supports consistent seating with the intended caliper system, helping maintain measurement stability across multiple operations. The practical benefit is reduced rework and fewer measurement-related delays. For buyers seeking components that integrate with established caliper-based processes, the accessory represents a pragmatic choice that balances simplicity with the expectations of professional metrology workflows. For procurement or technical clarification on the Teknik Makina U-plate (SKU TA030TM), contact Metav Werkzeuge for expert advice and delivery from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: TA030TM Name: U-plate Manufacturer: Teknik Makina Core data Weight: 0.1 kg eClass: 21189290 UID: TA030TM Special features Compatible with DCMT 11 calipers Caliper accessory for metrology use Lightweight design for easy handling FAQ What calipers is this accessory compatible with? The accessory is compatible with DCMT 11 calipers and is supplied as SKU TA030TM by Teknik Makina for straightforward matching. Is the U-plate suitable for workshop use or only laboratory environments? The U-plate was developed for everyday metrology tasks and is suitable for workshop inspection benches as well as controlled lab settings. How does the SKU help with procurement and inventory? SKU TA030TM provides clear identification for ordering and stock management, enabling fast procurement via Metav Werkzeuge and simple traceability in quality systems. Can the accessory affect measurement accuracy? When used with the specified caliper type, the U-plate supports stable seating and consistent handling, which contributes to repeatable measuring outcomes. Who manufactures the accessory and where can it be sourced? The accessory is manufactured by Teknik Makina and can be procured through Metav Werkzeuge with the SKU TA030TM referenced in orders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate DNMG 15 Compatible, 0.1kg - Teknik Makina
Take advantage of the compact U-profile, proven compatibility with DNMG 15 inserts and a featherlight design to simplify tool holding and minimise setup time; order directly via Metav Werkzeuge or consult our specialists for application advice. U-plate — Compact U-profile mounting plate for insert tooling, compatible with DNMG 15 The U-plate is a small mounting plate for workshop and toolroom applications, designed to support insert-based tooling systems and to integrate smoothly into existing clamping arrangements Compatible with DNMG 15 inserts Lightweight at 0.1 kg Compact U-profile for secure mounting Manufactured by Teknik Makina Precise compatibility reduces setup time and rejects The principal benefit of the U-plate is its clear specification for DNMG 15 compatibility, which streamlines tool selection and reduces guesswork when assembling holders and adapters. Specified compatibility means that the plate, which functions as a support and locating element, can be combined with standard DNMG indexable inserts without requiring bespoke adaptors. This rational, standards‑based approach shortens changeover times and contributes to a predictable machining process by avoiding mismatched interfaces that would otherwise require rework or adjustment. Lightweight design for quick handling and safe storage At roughly 0.1 kg, the component is extremely light, which gives tangible ergonomic advantages in the workshop environment. The reduced mass allows for faster manual handling during set-up and replacement cycles, and contributes to less strain when components are moved frequently across benches or between tool cabinets. The compact nature of the U-profile also means minimal storage footprint, enabling tidier organisation of tool kits and faster retrieval—factors that improve overall shopfloor efficiency. Robust integration into clamping assemblies Although compact, the plate is conceived to work as a stable clamping element within a tooling stack; its U-profile provides secure seating and repeatable orientation for the supported insert or holder. In practical terms, a reliable seating interface reduces micro-movements during cutting operations, which helps maintain consistent chip formation and surface finish. Where process stability is a priority, choosing components with clear mechanical fitment criteria ensures predictable behaviour under load and simplifies quality assurance procedures. Practical information for procurement and workshop use The minimalist specification of this item makes it straightforward to manage in procurement systems and spare parts lists: the small dimensions and single-purpose design mean fewer variants are required, lowering inventory complexity. The plate’s manufacturer, Teknik Makina, supplies it under SKU TA014-1TM, which can be cited when ordering or checking compatibility. For workshop planners seeking to rationalise tooling—linking insert types to fixed mounting plates—this component supports a compact, modular approach that reduces downtimes associated with mismatched parts. For supply and technical advice regarding the Teknik Makina U-plate, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability for specific tooling systems and delivery options. Technical data Article number: TA014-1TM Manufacturer: Teknik Makina Compatible with: DNMG 15 Weight: 0.1 kg ECLASS: 21189290 Facts Mass: 0.1 kg ECLASS code: 21189290 Special features U-profile mounting plate Designed for use with DNMG 15 inserts Compact, low-mass component FAQ Is the plate suitable for standard DNMG 15 turning inserts? Yes. The U-plate is specified for compatibility with DNMG 15 inserts and is intended to provide a stable seating for such insert-based tooling. What is the weight and how does that affect handling? The component weighs 0.1 kg, which makes handling and replacement rapid and ergonomically favourable in repetitive setup tasks. Who manufactures this mounting plate? This mounting plate is produced by Teknik Makina and supplied under SKU TA014-1TM for clear identification in procurement. Can this plate be used as a direct replacement in existing toolholders? Where holders accept the DNMG 15 interface, the plate functions as a compact support element; verification against the specific holder geometry is recommended before replacement. How should the plate be referenced when ordering or checking stock? Refer to SKU TA014-1TM and the designation U-plate when enquiring or placing orders to ensure accurate supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate For 16 ER Caliper, Steel Construction - Teknik Makina
Take advantage of a compact, workshop-ready accessory that improves repeatable measurements and integrates seamlessly with standard calipers; the lightweight design and clear compatibility make it a practical addition to precision toolsets. Order directly via Metav Werkzeuge or consult our advisors for application advice. U-plate — compact caliper accessory, compatible with 16 ER calipers (Teknik Makina) U-plate is a small, purpose-built mounting plate designed for workshop measuring setups and compatible with 16 ER calipers, providing a stable support for repeatable dimension checks. Compact U‑shaped support for measuring setups Compatible with 16 ER calipers Lightweight at 0.1 kg for easy handling Ideal for tight workshop spaces Stable mounting that improves measurement repeatability A compact mounting accessory designed to reduce handling variation and support consistent readings. The U-plate offers a simple interface for standard calipers, making it easier to achieve precision in repetitive checks. By providing a fixed reference geometry the accessory reduces the risk of lateral movement during measurement, which benefits quality control processes where small tolerances matter. The clear compatibility with 16 ER calipers ensures straightforward integration into existing inspection routines. Small footprint that speeds up workshop workflows The compact form and lightweight construction contribute to faster handling and reduced setup time on the shop floor. At 0.1 kg the support is easy to position and reconfigure, so technicians can keep inspection points close to production with minimal disruption. This space-conscious solution supports lean working practices and helps maintain throughput without sacrificing accuracy. Its unobtrusive profile means it fits on benches and portable measurement stations where space is limited. Reliable integration for trade and industrial use Built as a practical workshop accessory, the plate is suitable for routine use in trade and light industrial contexts. The straightforward design simplifies inventory and tool planning for buying departments, while the clear SKU reference TA061TM makes reordering transparent. As an accessory from Teknik Makina, the component complements precision toolsets by enabling consistent caliper positioning and repeatable measurement cycles, thereby supporting process stability in everyday operations. For tailored advice or to request TA061TM for your measurement setup, contact Metav Werkzeuge for a recommendation and delivery from Emmerich; eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: TA061TM Name: U-plate Manufacturer: Teknik Makina Suitable for calipers: 16 ER Weight: 0.1 kg ECLASS: 21189290 Facts Weight: 0.1 kg ECLASS: 21189290 Versions / Features Compatible with 16 ER calipers SKU TA061TM Brand: Teknik Makina FAQ What is the primary purpose of this accessory? The plate is a compact mounting accessory that supports repeatable caliper measurements by providing a stable, U-shaped reference for dimension checks. Which calipers are compatible with the plate? Compatibility is specified for 16 ER calipers; the accessory is designed to interface with these standard models for reliable positioning. Is the plate suitable for mobile inspection setups? Yes. With a weight of 0.1 kg, the plate is lightweight and suited to portable or bench-top measuring stations where frequent repositioning is required. Can the plate be identified for reordering? Yes. The item is listed under SKU TA061TM, which can be used for straightforward reordering and inventory management. Who manufactures this accessory? This component is supplied by Teknik Makina and intended as a practical workshop accessory for trade and light industrial inspection tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate For Indexable Inserts, Compatible With DNMG 15 - Teknik Makina
A compact U plate for DNMG 15 indexable inserts provides stable seating and a light replacement part (0.1 kg), supporting consistent turning performance and long service intervals; order the part via Metav Werkzeuge or consult the in-house advisors for specification checks. U plate for DNMG 15 indexable inserts by Teknik Makina — lightweight, precise seating U plate for secure seating of DNMG 15 indexable inserts in turning holders, suitable for routine workshop and industrial applications Compatible with DNMG 15 inserts Lightweight at 0.1 kg Robust seating for precise machining Long service life and reliable fit Secure seating for consistent turning quality The U plate is engineered to provide stable seating for DNMG 15 indexable inserts, reducing micro-movements that can affect surface finish and dimensional consistency. By ensuring a repeatable and accurate insert position, the carrier contributes to shorter set-up times and fewer rejects. The design focuses on mechanical reliability rather than decorative elements, so the key outcome is predictable machining performance and minimal adjustment during tool changes. Compact, low-mass design for efficient tool handling A low mass of 0.1 kg makes this component easy to handle and replaces with minimal disturbance to the tool assembly's balance. The compact footprint supports quick exchange of cutting edges in production environments where uptime matters. Lightweight components simplify manual changes and can reduce strain on clamping systems, which in turn supports steady tool behaviour and consistent cutting conditions across shifts. Durable construction for workshop continuity Specified as an accessory for indexable inserts, the plate is intended to assist in delivering long service life and dependable seating over repeated cycles. Reliable seating reduces the frequency of re-adjustments and supports predictable tool life for DNMG 15 inserts. For procurement and inventory planning, the component is a straightforward spare part that helps maintain productive turning operations and supports continuous output in small and medium workshops alike. For reliable spare-part supply and fast technical clarification from Metav Werkzeuge in Emmerich, request a detailed specification or a quote via info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fitment and availability Technical Data Article number: TA014TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 UID: TA014TM Special features Compatible with DNMG 15 indexable inserts Designed for precise seating and consistent machining Compact format for easy exchange and minimal balance impact FAQ Is this plate suitable for DNMG 15 inserts? The U plate from Teknik Makina is specified for DNMG 15 indexable inserts and is intended to provide accurate seating for that insert designation (SKU TA014TM). How heavy is the component and what does that mean for handling? The plate weighs 0.1 kg, which keeps handling simple and reduces impact on tool balance during manual exchange operations. Can the plate extend insert life by improving seating stability? Improved seating reduces micro-movement and can contribute to more consistent cutting conditions; the U plate is designed to support reliable positioning of DNMG 15 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate For TPKN 16, 0.1kg - Teknik Makina
Take advantage of a compact, workshop-ready caliper accessory that combines precise compatibility with lightweight handling — ideal for routine measuring setups. The plate fits TPKN 16 calipers, weighs just 0.1 kg and can be ordered via Metav Werkzeuge or discussed with their consultants for specification checks. U plate — caliper accessory compatible with TPKN 16 (Teknik Makina) The U plate is a compact caliper accessory intended to interface with TPKN 16 calipers, providing a stable contact point for repetitive measuring tasks in small workshops and inspection benches. Compatible with TPKN 16 calipers Lightweight: 0.1 kg Compact design for tight setups Reliable fit for existing measuring systems The accessory delivers a predictable mechanical interface for the specified caliper model, ensuring straightforward integration into established measuring routines. Designed as an attachment for the TPKN 16 caliper family, the component reduces setup variability by providing a consistent contact geometry. This focus on compatibility helps to shorten inspection preparation and supports repeatable measurement sequences in production environments where traceability of results matters. Space-efficient and easy to handle on the workbench With a low mass of 0.1 kg, the unit minimises added load on holders and carriers, making it suitable for compact benches and portable measurement stations. Its small footprint allows close placement to parts under test without obstructing workflow, supporting faster handling and reduced repositioning time. For workshops seeking compact solutions, the accessory contributes to a tidier measuring area while maintaining the mechanical stability required for reliable comparative checks. Procurement and technical identification for ordering The accessory is supplied by Teknik Makina under the SKU TA010TM and is identified by eClass code 21189290, which simplifies parts lists and procurement workflows. Compatibility with TPKN 16 calipers is the defining selection criterion; compatibility information should be verified against existing instruments before purchase. The clear identification data supports integration into purchasing systems and inventory, reducing the risk of ordering mismatched items. For ordering or specification advice on the Teknik Makina U plate (SKU TA010TM), contact Metav Werkzeuge in Emmerich for direct assistance and data confirmation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TA010TM Manufacturer: Teknik Makina Suitable for: TPKN 16 Facts Weight: 0.1 kg eClass: 21189290 Special features Caliper accessory for repeatable contact Compact form factor for workshop use FAQ What calipers is this plate compatible with? The U plate is compatible with TPKN 16 calipers and is specified to interface mechanically with that model family. How heavy is the accessory and how does that affect handling? Weighing 0.1 kg, the TA010TM is lightweight and easy to manoeuvre on a bench without significantly loading fixtures or holders. How is the product identified for procurement? The accessory is supplied by Teknik Makina under SKU TA010TM and eClass code 21189290 for straightforward ordering and inventory management. Is the plate suitable for compact workspaces? Yes—the compact design makes the accessory suitable for tight setups and portable measurement stations where space is limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate For WNMG 06, - Teknik Makina
Take advantage of the compact compatibility and reliable build to integrate the component into existing turning and milling setups. With clear compatibility for WNMG 06 inserts and a lightweight design of 0.1 kg, this part supports stable mounting and straightforward stock management — order directly via Metav Werkzeuge or consult the Metav team for specification advice. U-plate TA021TM — Compact U-plate compatible with WNMG 06 (Teknik Makina) A compact U-plate designed for secure mounting of WNMG 06 indexable insert assemblies, suited to workshop and CNC tool-holding applications. Compact U-profile for tight spaces Compatible with WNMG 06 inserts Lightweight at 0.1 kg Precision production by Teknik Makina Seamless tool integration for faster setup times The compact profile ensures efficient placement in constrained toolholders and adapters, delivering clear compatibility with the common WNMG 06 insert family. This reduces the need for customised shims or adapters and streamlines changeovers. By specifying a component that matches industry-standard inserts, the assembly process becomes more predictable and measurable, improving setup repeatability and lowering the likelihood of downtime caused by misalignment. The emphasis is on measurable benefits: consistent interfacing, reduced preparation time and easier inventory handling. Stable performance with a lightweight design A low mass of 0.1 kg contributes to simpler handling without compromising positional stability when correctly mounted. The light weight assists in rapid fixture changes and minimises added inertia on assemblies where mass matters. Combined with precise production tolerances from Teknik Makina, the component supports stable mounting and improved repeatability across multiple tool changes. For operations where cycle consistency and predictable tool behaviour are priorities, this design element supports process reliability and helps maintain machining tolerances. Optimised for workshop efficiency and stock clarity Specifying a standardised U-profile plate simplifies procurement and warehouse management: one compact part fits established insert types, cutting the variety of bespoke solutions. The combination of cross-compatible design and recognised manufacturer origin reduces sourcing uncertainty. Metav’s positioning as a precision partner means customers gain access to centralised supply and expert clarification, helping to democratise high-precision components for small and large workshops alike. This approach supports long-term operational planning and fosters confidence in component selection. For compact, WNMG 06‑compatible mounting with proven TekÂnik Makina quality, request availability and technical details from Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TA021TM SKU: TA021TM Manufacturer: Teknik Makina eCl@ss: 21189290 Weight: 0.1 kg Suitable for: WNMG 06 Facts Weight: 0.1 kg eCl@ss: 21189290 Special features Suitable for WNMG 06 Compact U-profile plate Lightweight design Manufacturer: Teknik Makina FAQ Is the U-plate TA021TM compatible with standard WNMG 06 inserts? Yes — the U-plate TA021TM is specified for compatibility with WNMG 06 inserts and intended for direct integration into matching tool assemblies. What is the mass of the component and how does it affect handling? The plate weighs 0.1 kg, which keeps handling simple for quick tool changes while maintaining stability once mounted. Can this plate be used in both manual and CNC setups? The U-plate is designed for general workshop and CNC tool-holding applications and functions where WNMG 06 insert compatibility is required. Who manufactures the part and where can technical details be verified? The plate is produced by Teknik Makina (TA021TM); further technical clarification can be obtained through Metav Werkzeuge’s product advisors. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate Precision Gauge Fixture, Fits 16 IT Calipers - Teknik Makina
Take advantage of a compact mounting solution that pairs low weight and direct compatibility with 16 IT precision calipers to streamline set-up and repeatable measurements; order the TA060TM through Metav Werkzeuge or consult the Metav team for procurement advice. U-plate TA060TM – compact mounting plate, compatible with 16 IT calipers The U-plate TA060TM is a compact mounting plate intended for precision caliper use in workshop and metrology contexts, designed to facilitate stable positioning of measuring instruments. Lightweight 0.1 kg for easy handling Compatible with 16 IT precision calipers Compact mounting plate for workshop metrology Predictable alignment for repeatable measurements The compact U-plate delivers a straightforward means of stabilising a precision caliper during routine checks and repetitive measurements. By combining a minimal mass of 0.1 kg with a simple mounting geometry, the plate reduces unwanted movement and helps secure a consistent reference position for the measuring tool. This stability is particularly useful when taking comparative measurements or when an operator needs to maintain a fixed datum while inspecting multiple workpieces, thus improving throughput without adding complex fixtures. Streamlined integration into everyday workshop processes Designed with workshop efficiency in mind, the plate’s compatibility with 16 IT calipers minimises set-up time and tool changes. The lightweight nature of the component makes handling and repositioning quicker, which supports faster inspection cycles and reduces operator fatigue during repetitive tasks. Where speed and reliability are essential, the U-plate provides a low-friction way to integrate a caliper into a measurement routine, supporting smoother workflows and fewer interruptions to production or inspection lines. Clear sourcing and traceability for procurement Supplied under the SKU TA060TM by Teknik Makina, the plate is intended as a straightforward accessory for precision measurement equipment. Specifying the SKU in procurement documentation simplifies reorders and ensures correct compatibility with existing calipers. Sourcing via Metav Werkzeuge brings additional assurance through a European supply point that acts as a quality filter and logistics hub, which helps maintain consistent availability and simplifies stock management for maintenance and inspection departments. For secure procurement and compatibility confirmation of the TA060TM U-plate from Teknik Makina, contact Metav Werkzeuge for tailored ordering and advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TA060TM Name: U-Platte Manufacturer: Teknik Makina ECLASS: 21189290 Weight: 0.1 kg Facts Weight: 0.1 kg ECLASS: 21189290 SKU: TA060TM Special features Compatible with 16 IT precision calipers Compact U-plate format for mounting and stabilisation FAQ What calipers are compatible with this mounting plate? The U-plate TA060TM is compatible with 16 IT precision calipers and designed to interface with that size/type for stable measurement set-ups. How much does the U-plate weigh and what does that mean for handling? The U-plate TA060TM weighs 0.1 kg, which makes it easy to handle and reposition during routine inspection tasks without adding significant bulk to the measurement station. Who manufactures the TA060TM and how is it identified for reorders? The TA060TM is supplied by Teknik Makina and can be reordered using the SKU TA060TM to ensure the correct mounting plate is obtained. Is the U-plate suitable for both production and laboratory inspection use? Yes, the U-plate TA060TM is intended as a compact stabilising accessory suitable for workshop and metrology environments where repeatable positioning of a precision caliper is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate SNMG 12 Compatible - Teknik Makina
Take advantage of a precise fit for SNMG 12 indexable inserts and the lightweight design that keeps toolholder load to a minimum; combine these attributes with reliable supply from Metav Werkzeuge for smooth integration into existing tooling. Order the part or consult Metav Werkzeuge for specification support. U-plate (compatible with SNMG 12) by Teknik Makina — compact, precise A versatile U-plate by Teknik Makina designed to accept SNMG 12 indexable inserts, suitable for integration into machining setups where a compact, predictable interface is required Compatible with SNMG 12 inserts Lightweight at 0.1 kg for minimal load Tekniк Makina manufacturing quality Secure compatibility with common indexable inserts for predictable set-up times The U-plate (TA050TM) provides a clear mechanical interface for SNMG 12 indexable inserts, offering a precision fit that reduces variability during tool setup. In practical terms, a dedicated mating surface for a defined insert geometry speeds repeatable installation and decreases downtime for retooling. For engineers and buyers, this means fewer adjustments on the machine, shortened set-up sequences and a reduced risk of misalignment affecting part quality. The component is intended as a simple, reliable element in a broader clamping and turning system rather than a stand-alone tool. Minimal mass for lower centrifugal and handling impact in machining environments Weighing just 0.1 kg, this plate is deliberately light to keep rotating assemblies balanced and to limit additional inertia where small mass changes matter. Lower mass contributes to reduced load on the toolholder and spindle, which can help maintain surface finish and dimensional stability in sensitive operations. The compact footprint and light weight also make manual handling and fixture changes quicker and less strenuous, supporting efficient workshop workflows without altering established machining parameters. Clear sourcing and traceability for dependable workshop supply Sourced from Teknik Makina and listed under SKU TA050TM, the plate is delivered with clear identification for inventory and quality tracking. Metav Werkzeuge acts as the European supply point, offering reliable availability and documentation that supports procurement processes. For procurement and quality assurance teams, the straightforward labelling and manufacturer link simplify stock control and conformity checks, helping to ensure consistent toolroom standards and uninterrupted production runs. Contact Metav Werkzeuge for precise product matching and delivery from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Teknik Makina U-plate compatible with SNMG 12 Technical data Article number: TA050TM UID: TA050TM Manufacturer: Teknik Makina Measurements Weight: 0.1 kg eClass: 21189290 Compatibility and features Suitable for: SNMG 12 SKU: TA050TM Manufacturer name: Teknik Makina FAQ Which insert type is this plate designed for? The U-plate is designed for use with SNMG 12 indexable inserts and provides a matching interface to ensure a secure seating of that insert geometry. What is the weight of the component and why does it matter? The component weighs 0.1 kg, which helps to limit additional inertia on the toolholder and supports easier handling during fixture changes. Is the U-plate traceable to a manufacturer? Yes, the plate is produced by Teknik Makina and listed under SKU TA050TM, enabling straightforward traceability for stock and quality procedures. Can this plate be used to reduce setup time in production? A dedicated plate for SNMG 12 inserts provides a consistent mounting interface, which contributes to shorter retooling and alignment times in repetitive production tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate SNMG 19 Compatible - Teknik Makina
Benefit from the compact, SNMG 19-compatible design and lightweight 0.1 kg construction for efficient set-up and reliable positioning. Order the U-plate directly via Metav Werkzeuge or consult our specialists for integration advice. U-plate — compact mounting plate, compatible with SNMG 19, by Teknik Makina The U-plate provides a compact mounting solution for indexable insert toolholders and small turning fixtures in workshop and CNC environments. Compact U-plate for indexable insert systems Compatible with SNMG 19 inserts Lightweight at 0.1 kg for easy handling Manufactured by Teknik Makina Faster set-up through precise compatibility The U-plate is designed for direct compatibility with SNMG 19 indexable inserts, which simplifies tooling choices and reduces alignment time. By offering exact seating geometry and repeatable locating features, the plate supports consistent precision across serial production runs. The compact format shortens tool-change procedures and helps maintain cutting accuracy without complex adjustments, delivering measurable process stability in turning operations. Practical benefits for workshop efficiency Constructed to be lightweight at 0.1 kg, this mounting plate reduces handling effort during tool changes and minimises inertia on small tool assemblies. The product, identified as TA051TM, integrates smoothly into existing tool inventories and helps standardise setups when SNMG-type inserts are used. The simplicity of the solution translates into less downtime for set-up and inspection, contributing to a leaner production flow and predictable machining outcomes. Sourcing and supply that fit the production chain As a standardised component from Teknik Makina, the plate supports streamlined procurement and inventory planning for maintenance and toolrooms. Clear product identification allows rapid reordering and stock checks, while a concise specification list aids compatibility verification across toolholders and adaptors. The focus on repeatable performance and compact design makes this plate a practical choice for workshops seeking reliable, easy-to-manage tooling components. For procurement enquiries, stock verification or technical clarification on the Teknik Makina U-plate (TA051TM), contact Metav Werkzeuge for reliable supply and professional advice. Technical data SKU: TA051TM Name: U-plate Manufacturer: Teknik Makina Core data Weight: 0.1 kg eClass: 21189290 Special features Suitable for SNMG 19 Compact mounting plate design FAQ What insert types is this mounting plate compatible with? The U-plate is compatible with SNMG 19 indexable inserts and is intended for use where that insert form is specified; the product is listed as TA051TM by Teknik Makina. Can the U-plate be used in small CNC turning applications? Yes, the plate’s compact format and low weight make it suitable for small turning and workshop CNC applications where SNMG-compatible insert seating is required. How does the U-plate improve set-up time? By providing a standardised seating for SNMG 19 inserts, the U-plate reduces alignment and adjustment time, helping to speed up tool changes and maintain consistent positioning. Is the U-plate identified for reordering and inventory control? The component is identified as TA051TM and supplied by Teknik Makina, which simplifies reordering and inventory management for maintenance and toolroom staff. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate SNMG 25 Compatible - Teknik Makina
Take advantage of a compact mounting plate that ensures quick, repeatable positioning and is compatible with SNMG 25 tooling; its lightweight construction streamlines handling and set‑up. Order the component directly via Metav Werkzeuge or consult the Metav team for compatibility advice. U-Plate TA053TM — compact mounting plate for SNMG 25, Teknik Makina The U-Plate by Teknik Makina is a compact mounting plate designed to provide secure, repeatable positioning for SNMG 25 tooling in workshop fixtures and small production cells Compact mounting plate for inserts Compatible with SNMG 25 tooling Very low weight 0.1 kg Precise alignment for fixture set‑ups Faster set-up through precise compatibility The mounting plate is engineered for straightforward integration with SNMG 25 tooling, reducing alignment effort during changeovers. By matching the indexing and seat geometry of the insert family, the plate supports faster clamping cycles and lowers downtime. This rational design improves process efficiency and supports steady production throughput without complex adjustments. Easier handling thanks to very low weight At only 0.1 kg, the component enables quick manual positioning and easier handling during fixture assembly. The lightweight profile reduces operator fatigue when mounting or removing plates and supports safe, ergonomic workflows in busy assembly areas. Fewer handling constraints mean faster fixture changes and a smoother preparation phase for machining operations. Consistent positioning for reliable results The plate promotes precision alignment and repeatability in repetitive setups, which helps to stabilise machining outcomes and reduce rework. With a focus on mechanical fit rather than electronics, the design gives a direct, verifiable basis for quality control and predictable performance in the production environment, enhancing part consistency over time. Practical choice for workshops and small plants As a compact solution from Teknik Makina, the plate fits into mixed workshop environments where flexibility and quick adaptation matter. Combined with Metav Werkzeuge’s supply chain and advisory services, the component becomes part of a dependable workflow: straightforward stock availability, clear product data and practical assistance for integration into existing jigs and fixtures. Contact Metav Werkzeuge for procurement and technical guidance on the Teknik Makina U-Plate TA053TM; the Metav team in Emmerich can confirm compatibility with SNMG 25 tooling and arrange delivery or further specification details. Technical data Article number: TA053TM Product name: U-plate Manufacturer: Teknik Makina ECLASS: 21189290 Facts Weight: 0.1 kg Compatibility: SNMG 25 Special features Compact design Lightweight handling Precise alignment for fixture set‑ups FAQ What tooling is the plate compatible with? The U-Plate TA053TM is compatible with SNMG 25 tooling and is intended for use where that insert family is specified. Is the plate suitable for repetitive fixture set-ups? Yes, the plate supports consistent positioning and improved repeatability in repeated fixture assemblies, helping to reduce set‑up variation. How does the low weight benefit workshop workflows? The 0.1 kg mass makes manual handling and rapid changeovers easier, reducing operator strain and accelerating set‑up times in busy workshops. Can Metav Werkzeuge advise on integration into existing fixtures? Metav Werkzeuge provides procurement and advisory services to assist with compatibility checks and practical integration of the U-Plate TA053TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm U-Plate Suitable For CNMG 16, 0.1kg - Teknik Makina
Take advantage of a compact, purpose-designed U plate that delivers reliable compatibility with CNMG 16 turning inserts and a minimal handling weight for faster set-ups; order the component directly via Metav Werkzeuge for secure European supply and expert advice. U Plate TA022TM — Compact mounting plate for CNMG 16, Teknik Makina The U Plate TA022TM is a compact mounting plate intended for clamping and toolholding applications, providing a precise interface for CNMG 16 turning inserts in workshop environments Compatible with CNMG 16 inserts Compact format, only 0.1 kg Designed for workshop mounting SKU TA022TM, Teknik Makina Faster set-ups through precise insert compatibility The mounting component offers precision alignment for CNMG indexable inserts, which reduces trial fitting and minimises machine downtime. By matching the established CNMG 16 geometry, the plate ensures consistent seat orientation and repeatable positioning for each indexable cutter, so setup variation is lower and process reliability increases. This compatibility translates into measurable improvements in process efficiency when integrated into standard turning routines. Minimal weight for easy handling and quicker changeovers Weighing just 0.1 kg, this compact plate lowers handling effort during tool changes and reduces the mass added to the tool assembly. The lightweight attribute simplifies manual handling at the workbench and decreases inertia for applications where frequent changes are required. For production areas that prioritise rapid tool exchange and ergonomic handling, the reduced mass contributes to swifter operations and lower operator fatigue without compromising alignment. Simple integration into existing toolholding arrangements As a purpose-built mounting plate from Teknik Makina, the component (SKU TA022TM) is intended to be incorporated directly into established toolholder systems that accept CNMG-format inserts. The straightforward design focuses on a reliable mechanical interface rather than on non-essential features, making it suitable for retrofitting or for expanding existing clamping inventories. When combined with a coherent toolholding strategy, the plate supports improved process repeatability and predictable tool performance. For procurement of Teknik Makina components such as the TA022TM U Plate and for guidance on compatibility with specific toolholders, contact Metav Werkzeuge in Emmerich for fast, reliable supply and tailored advice. Technical data Article number: TA022TM Manufacturer: Teknik Makina Eclass: 21189290 Weight: 0.1 kg Core data Weight (kg): 0.1 Eclass: 21189290 Design / Special features Product name: U‑Platte Compatible with CNMG 16 SKU: TA022TM Manufacturer: Teknik Makina FAQ Which insert size is compatible with this plate? The plate is compatible with CNMG 16 inserts; the geometry matches the CNMG indexable cutter standard for consistent seating. Is the U plate suitable for frequent tool changes? Yes, the low mass and compact format support quick handling and help to streamline repeated tool change routines. Can the plate be retrofitted into existing holders? The design is intended for direct integration into toolholder systems that accept CNMG-format interfaces; suitability depends on the specific holder geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate Suitable for WNMG 08 Inserts, 0.1kg - Teknik Makina
Benefit from the lightweight construction and direct compatibility with common indexable inserts for efficient toolset integration; order the U plate directly via Metav Werkzeuge or consult our specialists for application advice. U plate TA020-1TM — compact insert plate compatible with WNMG 08 by Teknik Makina The U plate is a compact clamping accessory designed to work with WNMG 08 indexable inserts, enabling straightforward integration into existing turning and tooling setups. Compatible with WNMG 08 inserts SKU TA020-1TM for easy ordering Weight only 0.1 kg Manufacturer: Teknik Makina Faster tool changes through direct insert compatibility The plate is built for straightforward acceptance of WNMG 08 indexable inserts, which leads to reduced setup and changeover times on the workshop floor. By matching a widely used insert geometry, this component supports stable seating and predictable repeatability during machining cycles. The result is measurable time savings during tool exchanges and fewer alignment interventions, improving overall process efficiency without altering established tooling standards. Compact form for convenient handling and storage Thanks to its compact footprint and 0.1 kg mass, the U plate is easy to handle, position and store between operations. The lightweight nature reduces operator fatigue during frequent changes and simplifies inventory management for spare parts. In small workshops and production cells alike, a lighter accessory minimises the need for heavy fixtures while retaining the convenience of immediate availability at the machine, supporting a more flexible workflow. Clear identification and traceability for procurement Logistics and procurement benefit from unambiguous identification: the article is listed under TA020-1TM and classified as eClass 21189290, which streamlines ordering and parts management. Clear SKU labelling reduces the risk of selecting incompatible components and expedites reorders. For production planners and stores, straightforward traceability means fewer interruptions and a smoother parts replenishment cycle for toolroom operations. Reliable supply chain supported by a precision partner Sourced from Teknik Makina, the plate is supplied through a distribution channel that emphasises dependable availability for industry customers. Metav’s European distribution hub acts as a quality filter and logistical anchor, ensuring that common tooling accessories remain accessible. This combination of local stock and consistent sourcing helps maintain uptime and supports continuous machining operations with predictable delivery performance. For procurement of the Teknik Makina U plate TA020-1TM or technical clarification on compatibility with WNMG 08 tooling, contact Metav Werkzeuge for direct assistance at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: TA020-1TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 Special features Compatibility: WNMG 08 inserts Product name: U plate FAQ What insert types are compatible with this plate? The U plate TA020-1TM is compatible with WNMG 08 indexable inserts and is intended for straightforward seating of that geometry. Is the component lightweight enough for frequent tool changes? Yes, the plate weighs 0.1 kg, which supports easy handling during repeated tool changes and storage. How is the item identified for ordering and inventory? The product is listed under SKU TA020-1TM and classified as eClass 21189290 for clear procurement and inventory control. Which manufacturer produces this plate? This plate is produced by Teknik Makina and supplied through Metav’s distribution for dependable availability. Can the plate be used in small workshop setups? The compact design and low weight make the U plate suitable for small workshops and production cells where ease of handling and quick changeovers are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate VBMT 16 Compatible, 0.1kg - Teknik Makina
Take advantage of a compact, compatible mounting solution that combines secure insert interface and light weight for faster tool changes. Benefit from clear SKU tracing and prompt procurement via Metav Werkzeuge — order directly through Metav Werkzeuge or consult the team for technical advice. U-plate mounting plate for VBMT 16 inserts by Teknik Cutting Tools — compact, lightweight mounting interface The U-plate is a compact mounting plate designed to accept VBMT 16 indexable inserts, providing a reliable interface for turning applications in workshop and production environments. Secure insert seating for stable machining Compact form for space-saving tool setups Precision alignment for repeatable clamping Lightweight at only 0.1 kg for quick handling Stable clamping for predictable machining results The mounting plate delivers a secure insert seating that reduces micro-movement during cuts, which in turn supports consistent surface finish and dimensional repeatability. By pairing the plate with VBMT 16 indexable inserts, shops gain a defined contact geometry that reduces variability at tool change. This technical reliability shortens setup checks and contributes to smoother production runs, particularly where repeatability across batches is essential. The design focuses on mechanical fit and function rather than add‑on complexity, enabling engineering teams to rely on a simple, robust mounting interface. Lightweight design that speeds up tool handling Weighing 0.1 kg, the plate is intentionally light to reduce handling fatigue and to lower the inertia introduced into tool assemblies. The lightweight characteristic eases manual tool changes and minimises stress on quick-change fixtures, which supports faster cycle times in both single‑station and multi‑station toolrooms. In practical terms, an accurate, low-mass mounting component helps maintain tool balance and contributes to reduced wear on fixtures and spindles when periodic tool swaps are frequent. Integration into efficient workshop workflows The plate is engineered for straightforward integration into existing toolholders and fixtures compatible with VBMT 16 inserts, enabling space-saving layouts and simplified inventory management. Fewer bespoke components are required when a standardised plate is used across similar turning tools, which supports purchasing consolidation and process standardisation. This practical approach to component selection aligns with the goal of improving operational efficiency while keeping procurement and storage demands modest. Reliable sourcing and traceability for production planning Supplied under SKU TA034TM and manufactured by Teknik Cutting Tools, the plate supports traceable procurement and rapid replenishment. The clear SKU and classification data ease stock tracking and reordering in commercial systems. Where clarity in supply chain and consistent part identification are required for production planning, the plate provides a concise, well‑documented option that integrates with standard industrial classification schemes. For workshop procurement of Teknik Cutting Tools components, contact Metav Werkzeuge in Emmerich for tailored ordering guidance and fast availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: TA034TM Manufacturer: Teknik Cutting Tools Facts Weight: 0.1 kg eClass: 21189290 Special features Designation: U-plate Suitable for: VBMT 16 inserts UID: TA034TM FAQ What insert type is compatible with this mounting plate? The plate is compatible with VBMT 16 indexable inserts and is designed to provide a repeatable seating for that insert style. Is the plate suitable for high‑speed tool changes in a production environment? Yes — the lightweight construction (0.1 kg) and compact design make the plate well suited to frequent, rapid tool changes in workshop and production settings. How is the part identified for reordering or stock management? The component is supplied under SKU TA034TM; Teknik Cutting Tools is listed as the manufacturer for traceability in procurement systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Plate VNMG 16 Compatible - Teknik Makina
Take advantage of precise insert alignment and a lightweight 0.1 kg construction for faster tool changes and consistent turning results; order the U-plate directly via Metav Werkzeuge or consult the team for tailored advice. U-plate TA033TM — insert mounting plate for VNMG 16 by Teknik Makina The U-plate TA033TM is a compact mounting plate engineered for secure use with VNMG 16 turning inserts in CNC tool holders. Compact U-plate for VNMG 16 inserts Lightweight: 0.1 kg for easy handling Durable construction for stable clamping Simple integration into tool holder systems Precise insert positioning for consistent turning results The U-plate provides accurate insert seating for VNMG 16 geometries, ensuring repeatable cutting edge location and reduced setup variation. Its design focuses on maintaining a stable contact surface between insert and holder, which translates into predictable cutting behaviour and fewer adjustments during batch runs. For operations where repeatability matters, the plate supports steady component quality and helps to shorten machine downtime through reliable positioning. Faster tool changes and smoother workshop workflows At 0.1 kg, the plate is deliberately lightweight to speed handling during tool changes and reduce the effort involved in setting up multiple holders. The reduced mass contributes to quicker exchange cycles and simplifies inventory management for production and maintenance teams. By streamlining the mechanical interface between insert and holder, the component supports efficient workflows and a more productive turning process without adding unnecessary complexity. Stable clamping as a foundation for process reliability Manufactured to robust tolerances, the plate promotes stable clamping under typical turning loads and assists in preserving insert life by preventing micro-movement. Compatibility with VNMG 16 insert types makes the component suitable for a broad range of standard turning applications in general workshop and industrial environments. When integrated into established tool holder systems, the plate enhances process reliability and contributes to consistent part finish and dimensional accuracy. For reliable compatibility with VNMG 16 inserts, source the Teknik Makina U-plate through Metav Werkzeuge — contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised technical guidance Technical data Article number: TA033TM Manufacturer: Teknik Makina Name: U-plate Facts Weight: 0.1 kg ECLASS: 21189290 Special features Suitable for: VNMG 16 UID: TA033TM FAQ What is the primary purpose of the U-plate TA033TM? The U-plate TA033TM serves as a compact mounting plate to secure VNMG 16 turning inserts in compatible tool holder systems, improving insert seating and repeatability. Which insert types fit the plate? The plate is compatible with VNMG 16 insert geometries and is engineered to match the seating and clamping requirements associated with that insert family. How heavy is the U-plate and how does that affect handling? Weighing 0.1 kg, the U-plate is lightweight, which facilitates quick handling and faster tool change routines in busy workshop environments. Can the plate be integrated into standard CNC tool holders? Yes; the U-plate is designed for straightforward integration into common insert holder systems where VNMG 16 inserts are used, supporting stable clamping and process reliability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm U-Shim for Indexable Inserts, Steel Construction - Teknik Makina
Combine secure clamping, robust construction and a precise fit to improve insert stability and tool life; order supply or consult specialists via Metav Werkzeuge for reliable delivery and technical guidance. U-washer for indexable inserts — precision clamping shim (Teknik Makina) The U-washer is a clamping shim designed to secure indexable cutting inserts in metalworking toolholders, optimised for demanding steel machining applications. Secure retention for indexable inserts Robust steel design for heavy-duty use Precise fit reduces insert movement Compatible with standard insert clamps Stable clamping for consistent machining results A consistently tight clamp is essential for repeatable cutting performance. The clamping shim prevents microscopic insert movement that can cause chatter and premature wear, delivering precision and improved surface finish. By reducing vibration, the component supports longer tool life and more predictable cycle times, which translates into measurable productivity gains on steel and alloy workpieces. The design focuses on mechanical stability and simple integration into existing toolholder assemblies. Durability that keeps production running Robust construction minimises the need for frequent replacements and lowers maintenance interruptions. The washer’s build quality supports sustained forces encountered in heavy-duty turning and milling, contributing to durability and reduced tooling-related downtime. Fewer interventions for clamp re-torquing mean more continuous machining time and a better total cost of ownership for workshops that demand reliable operation under repetitive load. Seamless compatibility with common insert systems The component is intended as a direct substitute in standard insert clamping arrangements, offering compatibility with a wide range of toolholder designs. The shim’s geometry provides a precise seating surface, improving repeatability of insert location and simplifying reassembly after tool changes. For procurement and implementation, this clamping shim integrates smoothly into established workflows and inspection routines without requiring additional setup work. Enquire about Teknik Cutting Tools' U-washer through Metav Werkzeuge for technical guidance and prompt supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: BSP010TM Manufacturer: Teknik Makina eClass: 21189290 Numeric data Weight: 0.1 kg Special features For indexable inserts Suitable for steel machining Robust clamping shim for inserts FAQ What is the primary function of this washer? The washer ensures secure retention of indexable cutting inserts, improving stability and reducing insert movement during machining. Is the washer suitable for steel machining? Yes, the product is specified for robust steel machining applications and is presented for use with indexable inserts in metalworking. Are material and heat-treatment details provided? Material and heat-treatment data are not specified in the available product information for the U-washer (BSP010TM). How does the washer influence tool life? By stabilising the insert in the clamping seat, the washer reduces micro-movements and vibration, which helps to extend insert life and maintain consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Screw for End Mill M5, Allen Key 3mm - Teknik Makina
Take advantage of the secure fit provided by the M5 thread and the compact 16 mm overall length to maintain stable tool clamping and consistent machining results; combine reliable performance with quick servicing and order via Metav Werkzeuge or ask the Metav consultants for technical guidance. Screw TC178TM by Teknik Makina — M5 thread, 16 mm overall length A Screw TC178TM designed for clamping end mills, providing compact fixation in toolholders and cutters for CNC and manual milling applications. M5 thread for reliable clamping 16 mm overall length for compact fit 7.8 mm head diameter for secure seating Fits 3 mm Allen key for standard assembly Stable clamping for consistent machining The primary benefit of this clamping screw is repeatable tool retention through its M5 thread and compact dimensions. The combination of M5 thread and the specified head diameter yields secure axial fixation, which reduces micro-movement under cutting forces and helps preserve tool concentricity. For workshops that value process stability, this results in fewer rejects and more consistent surface finish on machined parts. The design suits end mill holders where space is limited and precision is required. Fast setup with standard workshop tools Installation and removal are straightforward thanks to the compatibility with a 3 mm Allen key, cutting setup time and simplifying maintenance tasks. The modest 16 mm overall length and nominal head diameter make the screw easy to reach in confined toolholders, accelerating changeovers and reducing machine downtime. For production environments focused on efficiency, quick tool changes translate into higher machine utilisation and lower operating costs per component. Practical compatibility and reliable sourcing With a nominal head diameter of 7.8 mm and a listed mass of 0.1 kg per item, this component is sized for common end mill assemblies and small toolholders used across general milling operations. Classified under eClass 21189290, the fastener is documented for procurement and inventory systems. Sourcing via a dedicated distributor ensures consistent availability and traceability, providing workshops with the stock control and delivery reliability expected in professional settings. For reliable tool clamping and technical advice on suitability for specific holders, contact Metav Werkzeuge — Metav’s specialists in precision components are available from Emmerich and can provide procurement and application guidance by email or phone. Technical Data Article number: TC178TM Manufacturer: Teknik Makina Description: Screw for end mill ECLASS: 21189290 Facts Thread: M5 Overall length: 16 mm Head diameter: 7.8 mm Weight: 0.1 kg Special features Compatible with 3 mm Allen key Suitable for clamping end mills SKU: TC178TM FAQ What thread does the clamping screw use? The screw uses an M5 thread, as specified for the TC178TM from Teknik Makina. Which Allen key fits the screw? Assembly and removal of the TC178TM require a 3 mm Allen key, compatible with standard workshop tool sets. What is the overall length and head diameter? Overall length is 16 mm and the head diameter is 7.8 mm, matching compact toolholder requirements. Can this screw be used for common end mill holders? Yes, the TC178TM is specified for clamping end mills and is designed to fit typical compact holders where an M5 fastener is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm U-Plate Suitable For 16 ER Calipers - Teknik Makina
A compact, low-mass U-plate combines compatibility with 16 ER calipers and simple integration into measurement fixtures to improve setup speed and repeatability. Choose supply via Metav Werkzeuge for assured stock handling and workshop delivery. U-Platte – compact measurement plate, compatible with 16 ER calipers by Teknik Makina The U-Platte is a compact positioning plate intended for use in measuring fixtures and compatible with 16 ER calipers, offering a lightweight option for repeatable setups in workshop environments Compatible with 16 ER calipers Lightweight: 0.1 kg for easy handling Robust design by Teknik Makina Consistent measurement interfaces that reduce setup time The U-plate is designed to provide a defined interface for caliper-based measurements, which helps to increase repeatability in routine checks. Its compatibility with 16 ER calipers ensures straightforward integration into existing gauge arrangements and measurement jigs. By standardising the mounting point, the component reduces variability between successive operations and supports predictable measurement workflows, a clear advantage in serial inspection or frequent fixture changes. Lightweight construction for faster manual handling and fixturing With a mass of just 0.1 kg, the plate adds minimal inertial load to handheld or bench-mounted setups, enabling quicker alignment and repositioning during multi-point inspections. The low mass contributes to workshop efficiency by simplifying handling and decreasing operator fatigue during repetitive tasks. In practice, this means faster cycle times for manual gauges and less disturbance to delicate parts while measuring, which is particularly useful when tight process tolerances demand stable but agile fixturing. Clear specification and supply chain reliability Documented under SKU TA040TM, the component is supplied by Teknik Makina and intended as a practical accessory for measurement toolsets. The simple specification supports easy inventory management and rapid procurement decisions. Where detailed material data or additional mounting information is required, the SKU ensures unambiguous identification within procurement lists and parts catalogues, helping to maintain orderly stock and minimise procurement errors. For reliable supply and workshop-ready delivery of Teknik Makina measuring accessories such as this U-plate (SKU TA040TM), contact Metav Werkzeuge in Emmerich for order handling and logistical support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TA040TM Name: U-Platte Manufacturer: Teknik Makina Suitable for calipers: 16 ER Weight: 0.1 kg ECLASS: 21189290 Facts Weight (kg): 0.1 ECLASS (code): 21189290 Special features Product type: U-plate Intended application: caliper interface (16 ER) Manufacturer SKU: TA040TM FAQ What is the primary function of this plate? The U-Platte (TA040TM) serves as a compact positioning plate for caliper-based measurement fixtures, specified for use with 16 ER calipers. What is the weight of the component? The plate has a weight of 0.1 kg, which reduces added mass in manual and bench setups. Which calipers is the plate compatible with? Compatibility is documented for 16 ER calipers; compatibility with other models is not specified in the product data. What material is the plate made from? Material information is not provided in the available product data for the U-Platte (TA040TM). Are details on mounting or included accessories provided? No scope-of-delivery or mounting hardware details are listed in the supplied product information Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17.1mm Locking Screw M8 24mm Overall Length, Allen Key 5 Compatible - Teknik Makina
Take advantage of a compact locking solution with an M8 thread and a precise 17.1 mm diameter to guarantee repeatable clamping for measuring tools; order directly via Metav Werkzeuge or consult the team for application advice. Locking screw (Verriegelungsschraube) — M8 thread, 24 mm overall length (Teknik Makina) Locking screw (Verriegelungsschraube) for secure clamping on calipers and small fixtures; designed for workshop and precision-measurement applications M8 thread for secure fastening Compatible with 5 mm Allen key Compact 24 mm overall length Consistent clamping for precision measuring equipment The compact locking screw offers a straightforward way to secure sliding parts on measuring instruments and small fixtures. With an M8 thread and a 17.1 mm diameter, the design prioritises repeatability and stable clamping force, which reduces measurement variability during routine checks. In practice, a correctly specified thread and contact diameter mean fewer positional shifts under load, so measurement results remain consistent. Engineers and technicians working with calipers and comparable tools benefit from the predictable mechanical behaviour of this fastener. Simple installation and maintenance for busy workshops Installation requires only a 5 mm Allen key, making assembly and readjustment rapid and accessible at the bench. The 24 mm overall length ensures the component fits into compact assemblies without requiring modifications to the host instrument. The light weight contributes to minimal added mass on movable parts while still providing firm locking action. For teams aiming to streamline tool set-up and maintenance cycles, this fastener reduces downtime: quick access with a single tool and a straightforward thread engagement combine to save time in repetitive tasks. Engineered for reliability and easy procurement Manufactured by Teknik Makina, the component is designed for routine use in industrial and workshop environments. The plain, functional form supports a robust locking action and straightforward replacement when required. Buyers can rely on standard metric sizing—M8 and common Allen-key operation—so spare-part management is simplified and compatible with existing inventories. When precision instruments demand dependable securing elements, this locking screw provides a narrow, well-defined solution that integrates with standard calipers and measuring fixtures. For reliable clamping with Teknik Makina components, contact Metav Werkzeuge in Emmerich for stock and application guidance — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TC054TM Manufacturer: Teknik Makina Diameter: 17.1 mm Thread: M8 Overall length: 24 mm Weight: 0.1 kg ECLASS: 21189290 Suitable for calipers: 5 mm Allen key Product type: locking screw Design: compact locking fastener FAQ What tool is required to fit the locking screw? The locking screw is designed to be tightened with a 5 mm Allen key; this simple hex drive enables fast installation and adjustment. Is this fastener suitable for use on calipers? Yes, the component is specified for caliper applications and is listed as suitable for calipers with a 5 mm Allen key interface. What are the main dimensions of the part? The fastener features an M8 thread, a 17.1 mm diameter and a 24 mm overall length (SKU TC054TM). Which manufacturer supplies this locking screw? This locking screw is supplied by Teknik Makina and is offered through Metav Werkzeuge as the responsible distributor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com