Shim - Teknik Makina

Technical Data: Order Number: TA045TM Item: Shim usable with Brand: Teknik Makina Numerical Representations: Weight: 0.1kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Shim - Teknik Makina

Product Information: Order Number: TA019TM Item: Shim usable with Brand: Teknik Makina Structural Details: Weight: 0.1kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

T10 Torx Key, T10 Size, 0.1kg - Teknik Makina

Take advantage of a compact, purpose-fit tool: the combination of a T10 tip and a lightweight form supports efficient assembly and reduced rework. Secure the required item directly via Metav Werkzeuge or consult the team for application advice. Torx key T10 — Compact workshop hand tool by Teknik Makina Torx key T10 for precise engagement with Torx fasteners in maintenance, assembly and general workshop tasks T10 tip for Torx fasteners Lightweight at 0.1 kg for easy handling Compact hand tool for tight spaces Manufactured by Teknik Makina Reduced fastener wear through precise engagement A tool with a defined T10 geometry offers precision engagement that lowers the risk of cam‑out and rounded fastener heads; this translates directly into fewer repairs and less downtime on the shop floor. The proven fit of the bit to the fastener head enables consistent torque transmission, which is particularly relevant when repeatability matters in serial assembly or scheduled maintenance. By relying on a single-size driver for matching fasteners, processes become more predictable and quality control is simplified. Easier access and controlled handling in confined areas The compact format of the driver improves access to recessed or obstructed fasteners and supports steady handling during intricate tasks. Thanks to its lightweight nature — 0.1 kg — manoeuvring the tool is less fatiguing over repeated cycles, improving operator comfort and reducing the likelihood of slips. Where service engineers face limited clearance, a compact driver maintains controlled leverage while allowing for precise alignment, which speeds up on-site interventions and small-batch production work. Simple stock management and workshop compatibility A single-purpose hand tool such as this reduces inventory complexity: keeping the designated Torx size on hand avoids unnecessary tool swaps and eases procurement. The item is identified under SKU T10TM and integrates seamlessly into workbenches and tool trolleys used in light industrial, trade and maintenance environments. Sourcing from a recognised maker ensures consistent supply, while the tool’s straightforward specification supports training and standardisation across teams. For reliable workshop fastening, contact Metav Werkzeuge to discuss the Teknik Makina T10 option and confirm suitability for the intended applications — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance Technical data Article number: T10TM Manufacturer: Teknik Makina Torx size: T10 Weight: 0.1 kg eCl@ss: 21189290 Facts Weight: 0.1 kg eCl@ss code: 21189290 Special features Tool type: Torx key for T10 fasteners Compact design for tight access Suitable for assembly and maintenance FAQ What Torx size does this tool fit? The tool fits T10 Torx fasteners; the Teknik Makina Torx key (SKU T10TM) was specified for that size. Is the driver suitable for use in confined spaces? Yes, the compact hand tool design is intended for tight access and maintains control when reaching recessed fasteners. How much does the tool weigh and how does that affect use? Weighing 0.1 kg, the lightweight construction reduces operator fatigue during repeated use and supports steady handling. Can this driver be included in a standard workshop kit? The Torx key is straightforward to stock and integrate into workshop sets; SKU T10TM simplifies inventory tracking. Who manufactures this Torx key and where can advice be obtained? The tool is produced by Teknik Makina; for purchasing guidance or application questions consult Metav Werkzeuge as noted above. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

T15 Torx Key, 0.1kg - Teknik Makina

Take advantage of the compact T15 Torx key with a precision tip and a light 0.1 kg handling weight for efficient fastening in workshop tasks; order or request further advice via Metav Werkzeuge for a reliable supply. Torx key T15 (T15TM) – Compact Torx key by Teknik Makina A Torx key T15 designed for secure engagement with T15 Torx fasteners in maintenance, assembly and workshop environments. Precision T15 tip for Torx fasteners Lightweight: 0.1 kg for easy handling Compact design for tight spaces Suitable for professional workshop use Reliable engagement reduces rework and improves throughput The precision-machined T15 tip ensures a secure interface with Torx fasteners, which reduces the risk of slipping and stripped heads. This technical fit improves torque transfer and leads to fewer repeat operations — a measurable benefit for production and maintenance workflows. The clear specification of the tip size supports quick tool selection and avoids time lost on trial fitting, contributing to a smoother, more efficient assembly process. Compact, lightweight handling for faster tasks With a total weight of 0.1 kg, the tool is easy to manipulate for repetitive fastening work and offers noticeably reduced hand fatigue during extended use. The compact form factor is particularly useful where access is restricted, enabling tasks to be completed faster and with greater confidence. The light construction also streamlines storage and transport within mobile tool kits or service vans, aiding rapid response in field servicing. Practical addition to a professional toolkit with dependable sourcing This Torx key is a straightforward addition to workshop toolsets where standardised fastener systems are used. The clearly stated T15 designation supports compatibility planning across maintenance inventories. Sourcing via Metav Werkzeuge adds logistical reliability: Metav’s Emmerich location acts as a quality filter for the European market, ensuring consistent supply and simplifying procurement for industry and trade. Contact Metav Werkzeuge today to confirm availability of the Teknik Makina Torx key T15 (SKU T15TM) and to arrange a tailored supply for workshop or service requirements Technical data Article number: T15TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Torx size: T15 Weight: 0.1 kg Features / Applications Compatible with Torx T15 fasteners Intended for workshop and maintenance use FAQ What size fasteners does this key fit? The Torx key T15 fits Torx fasteners specified as T15; the size is indicated on the SKU T15TM. Is the tool suitable for professional use in a workshop? The Torx key T15 is described for workshop and maintenance applications and is suitable for professional tool kits. What is the weight of the Torx key T15? The listed weight for the Torx key T15 (SKU T15TM) is 0.1 kg. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

T20 Torx Key, Stainless Steel Finish - Teknik Makina

Take advantage of a precision T20 drive and ultra-lightweight handling to speed up assembly tasks and reduce operator fatigue; the compact format keeps workshop inventory manageable. Order directly via Metav Werkzeuge or ask the consultants for procurement advice. Torx key T20 — compact T20 drive for workshop and assembly The Torx key T20 is a compact hand tool designed for fast, reliable engagement with T20 fasteners across maintenance, assembly and repair tasks Torx key T20 precision fit Lightweight, only 0.1 kg handling ease Ideal for assembly and repair tasks Teknik Makina original SKU T20TM Faster, more reliable engagement with Torx fasteners The Torx geometry reduces slipping under load and provides a precision fit that translates into fewer cam‑outs and faster screwdriving cycles. With the marked T20 drive size, this key matches the ISO‑defined Torx profile and is suited for repeatable operations where consistency matters. The drive form is explained here so non‑specialists understand the benefit: the star‑shaped recess transfers torque across multiple contact points, lowering the risk of tool and fastener damage and thereby improving process throughput and component longevity. Reduced fatigue through light handling and compact design At just 0.1 kg, the tool supports long routines without adding cumbersome weight to the toolbox. The low mass makes it suitable for technicians and assembly staff who perform many fastening actions per shift, supporting smoother workflows and improved ergonomics. The compact footprint keeps pockets and small toolkits organised and helps speed up task changes on the workbench. The direct consequence is shorter handling times and less strain during repetitive tasks, a practical plus in both workshop and production environments. Straightforward stock management and compatibility Available as SKU T20TM from Teknik Makina, the item is easy to catalogue and reorder for maintenance spares. The clear designation of the Torx size simplifies procurement and reduces the chance of incorrect parts being purchased. For companies consolidating suppliers, the short SKU and concise specification enable predictable replenishment and audit trails. The small, clearly identified tool supports lean inventory practices and swift identification on the workbench. For procurement or volume requirements of the Teknik Makina Torx key T20, contact Metav Werkzeuge in Emmerich for ordering and supply coordination at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: T20TM Manufacturer: Teknik Makina ECLASS: 21189290 Torx size: T20 Weight: 0.1 kg Numerical data Weight (kg): 0.1 ECLASS: 21189290 Features Suitable for Torx T20 fasteners SKU: T20TM Brand: Teknik Makina FAQ What size of fasteners does this tool fit? The tool fits Torx size T20 fasteners; the designation is indicated on the SKU T20TM. Is the T20 key suitable for repetitive assembly work? Yes, the T20 key by Teknik Makina is designed for regular use and its 0.1 kg mass supports reduced operator fatigue in repetitive tasks. How is the Torx drive beneficial compared with slotted or Phillips heads? The Torx drive distributes torque across multiple contact surfaces, reducing cam‑out and wear on both tool and fastener, which improves process reliability. Can the tool be identified easily for reordering? Yes, the clear SKU T20TM and the labelled Torx size simplify stock management and reordering. Who manufactures this Torx key? The tool is from Teknik Makina; the product is supplied under SKU T20TM and distributed via Metav Werkzeuge for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

T6 Torx Key T6, 0.1kg - Teknik Makina

Take advantage of a compact T6 size and a lightweight design combined with proven longevity for reliable, repeatable fastening in confined spaces; order the Torx key T6 directly via Metav Werkzeuge or ask our consultants if needed Teknik Makina Torx key T6 — Compact T6 Torx key, lightweight and precise The Torx key T6 is a compact fastening tool designed for precision assembly and maintenance tasks in workshops and production lines, offering a small footprint for tight access and consistent torque transmission Compact T6 size for tight spaces Lightweight construction — approx. 0.1 kg Long service life for repeated use Fast dispatch from stock Precision where access is limited A small-form T6 tool delivers accurate engagement with Torx fasteners in confined assemblies. The compact geometry ensures reliable contact between driver and screw head, reducing cam‑out and rounding. For production and repair environments this translates into fewer rework cycles and a stable process flow; the slender form factor also enables access in recesses where larger drivers cannot operate, improving throughput in tight‑tolerance work. Consistent handling and measurable efficiency Weighing around 0.1 kg, this key offers a noticeably low mass that reduces operator fatigue during repetitive tasks. Lower weight, combined with the standardised Torx profile, permits swift manual operations and precise small‑assembly work. The result is improved cycle times and a repeatable fastening sequence, which supports quality assurance efforts and reduces the need for costly corrective measures. Built to last for demanding applications Designed for extended use, the tool provides a long service life suitable for workshop and light industrial settings. The proven durability reduces replacement intervals and supports predictable maintenance planning. By favouring a tool with sustained performance characteristics, inventories become leaner and process reliability increases, contributing to overall cost-efficiency in tooling management. Simple integration into the workshop toolkit The compact driver is a straightforward addition to existing tool assortments and maintenance kits. Its standard T6 profile ensures compatibility with common Torx fasteners used across electronics, instrumentation and mechanical assemblies. Clear labelling and a compact footprint make storage and identification easier on crowded benches, supporting efficient workflow organisation. Reliable supply and traceability Sourced through an established distribution channel, this T6 key benefits from rapid fulfilment from stock and established logistics, helping to avoid production delays. Traceability via the article identifier supports inventory control and tool‑management routines, enabling maintenance planners to keep track of tooling condition and replacement needs without guesswork. For dependable, compact fastening choose Teknik Cutting Tools’ Torx key T6 and contact Metav Werkzeuge for expert advice and fast supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T6TM SKU: T6TM Manufacturer: Teknik Makina Size: T6 Weight: 0.1 kg ECLASS: 21189290 Facts Numerical identifier: T6TM Weight (kg): 0.1 ECLASS code: 21189290 Special features Compact Torx profile Suitable for access-restricted applications Noted long service life in product description Fast dispatch / from stock Listed by Teknik Makina FAQ What size of screw is this key intended for? The T6 size matches standard Torx fasteners specified as T6; the Torx key T6 is designed for secure engagement with that profile. Is this tool suitable for repeated workshop use? Yes — the key is described with a long service life, making it appropriate for frequent manual operations in assembly and maintenance. How heavy is the driver and does that affect handling? Weighing approximately 0.1 kg, the driver is lightweight, which supports comfortable handling during repetitive tasks and reduces operator fatigue. Can this key reach fasteners in tight or recessed positions? The compact geometry of the T6 profile enables access in confined spaces and recessed screw heads, improving usability in restricted assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

T7 Torx Key T7, 25mm Length - Teknik Makina

Light, precise and workshop-ready: the T7 Torx key combines secure engagement for fine fasteners with a compact 0.1 kg form factor and clear SKU identification for effortless procurement. Order directly via Metav Werkzeuge or consult the Metav team for specification matching. Torx key T7 by Teknik Makina — Compact hand tool for fine Torx fasteners The Torx key T7 is a precision hand tool intended for secure fastening of small Torx screws in compact assemblies and maintenance tasks T7 Torx size for small fasteners Lightweight tool at 0.1 kg Compact format suitable for workshop kits Supplied by Teknik Makina Secure engagement for fine assemblies The T7 tip provides a secure fit with minimal cam‑out, which supports reliable torque transfer in delicate fastening tasks. By reducing slippage the tool helps to protect screw heads and mating components during repeated use, improving process consistency on small assemblies. The clear geometry of the drive interface ensures predictable contact between key and fastener; this contributes to fewer rework cycles and steadier assembly quality, especially where precision counts. Compact format that speeds workshop workflows Weighing just 0.1 kg, the key is designed for easy handling and rapid tool changes in busy workshops. The compact format makes integration into maintenance kits and instrument pouches straightforward and keeps bench clutter to a minimum. The item is listed under SKU T7TM, enabling quick identification in procurement systems and simple stock replenishment. Lightweight handling combined with distinct identification supports faster task cycles and clearer inventory control. Trusted supply and practical procurement advantages Sourcing through Metav Werkzeuge brings transparency and reliability to procurement. Metav’s position as a European quality filter — serving over 48,000 customers with a broad range of precision workshop supplies — means the item is available within an established supply chain from Emmerich. This distribution setup reduces lead times and centralises product selection, making specification checks and repeat orders more efficient for industrial and trade customers. The combination of a compact, precision tool and dependable supply supports continuous workshop operation. For procurement advice or to request a specification match for Teknik Makina tools, contact Metav Werkzeuge and quote SKU T7TM for quick handling and tailored recommendations Technical data Article number: T7TM Manufacturer: Teknik Makina Product: Torx key T7 Facts Weight: 0.1 kg eClass: 21189290 Special features Size: T7 Torx Tool type: Hand tool Format: Compact Origin: Teknik Makina FAQ What applications suit a T7 Torx key? The Torx key T7 from Teknik Makina is suitable for fastening small Torx screws commonly found in precision instruments and compact assemblies; reference SKU T7TM when specifying the tool. How is the T7 size identified on fasteners? A T7 tip matches the internal star profile marked as T7; the Teknik Makina Torx key T7 aligns with standard Torx geometry for consistent engagement, SKU T7TM. Can this key be used for repeated workshop tasks? The Torx key T7 is intended for routine hand assembly and maintenance operations; Teknik Makina designs the tool for regular use in workshop environments (see SKU T7TM for procurement). What measures reduce screw head damage when using the key? Correct seating of the T7 tip and steady, controlled torque minimise cam‑out; using the Torx key T7 in the proper application helps protect screw heads and mating parts (SKU T7TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

T8 Torx Key Hex L‑Bar, T8 Size, 0.1kg - Teknik Makina

Compact, precise and purpose-built: the combination of a true T8 Torx profile and a lightweight 0.1 kg body ensures reliable engagement in confined assemblies; order the part directly via Metav Werkzeuge or consult the technical advisers if guidance is required. Torx key T8 — compact Torx hand key by Teknik Makina for precise Torx T8 engagement The Torx key T8 is an efficient hand tool for precise engagement with Torx T8 fasteners in tight or recessed assemblies, designed for routine workshop and maintenance tasks Precision T8 Torx tip for accurate engagement Compact design for confined spaces Lightweight at 0.1 kg for easy handling Precise engagement that reduces cam‑out and rework A defined Torx T8 profile provides a secure interface with the fastener head, which reduces the risk of rounding and cam‑out during assembly operations. The controlled geometry of the tip enables consistent torque transfer when used with manual operation, delivering measurable improvements in fastening reliability. For production or repair work where repeatable results matter, the precise drive profile supports faster cycle times and fewer rework loops compared with worn or improvised tools. Space‑saving form for demanding assembly environments The compact format of this hand key is intended for access in shallow bores, recessed fixings and electronics enclosures where clearance is limited. The reduced length and low mass make it simpler to manoeuvre in restricted spaces, improving accessibility without sacrificing engagement quality. This combination of compact design and secure tip geometry helps maintain assembly speed and reduces the time required to reach awkward fasteners, adding practical value in day‑to‑day workshop use. Practical specification and workshop suitability With a measured mass of 0.1 kg, the key offers tactile control and minimal operator fatigue during repetitive tasks. The tool is identified by SKU T8TM, enabling straightforward stock control and reordering. As a simple, hand‑operated solution the tool integrates cleanly into standard maintenance kits and tool rolls, providing a dependable, no‑frills method for handling Torx T8 fasteners across a range of common applications. For consistent, compact fastening use the Teknik Makina T8 Torx key — contact Metav Werkzeuge in Emmerich for procurement or technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T8TM Torx size: T8 Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 Special features Compact design Precision Torx tip Hand tool, SKU T8TM FAQ What fastener size is compatible with this key? The key fits Torx T8 fasteners; the tool profile is manufactured for secure engagement with T8 heads. Is the tool suitable for confined or recessed fixings? Yes, the compact form factor is intended to provide access in confined spaces and shallow recesses. How is the item referenced for ordering and stock control? The product is listed under SKU T8TM, which should be used for procurement and inventory purposes. Can this key be stored in a standard workshop tool roll? The light weight and compact dimensions make the key well suited for inclusion in common workshop kits and tool rolls. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Verriegelungsschraube Gewinde: M5

Verriegelungsschraube Gewinde: M6

Verriegelungsschraube Gewinde: M8