5mm Torx Screw T7 Drive M2.2 Thread, 60° Angle - Teknik Makina

Take advantage of the combination of fine M2.2 threading, a compact 3 mm diameter and a short 5 mm overall length for precise, space-saving fixing solutions — order directly via Metav Werkzeuge or consult our specialists for application advice. Torx screw TC059TM — M2.2 thread, 3 mm diameter (Teknik Makina) A Torx screw intended for small-scale assemblies and fixtures, providing compact fixation for precise mechanical and electronic components; compatible with a T7 hex key. Fine M2.2 thread for precise assemblies Compact 3 mm diameter for tight spaces Short 5 mm overall length for shallow joins 60° head angle suitable for countersunk seating Precision fit for compact assemblies The compact design of this fastener delivers a reliable mechanical connection where space is at a premium. With a M2.2 thread and a 3 mm diameter, the component is tailored for miniature housings, instrument fixtures and small machine parts. The fine thread pitch reduces the risk of material stress in thin-walled parts and enables controlled torque application during installation. In practice, this means cleaner assembly procedures and fewer rework cycles on densely packed assemblies. Secure seating and repeatable alignment A 60° head angle enables consistent countersunk seating in prepared holes, ensuring repeatable alignment across multiple fixings. The 5 mm overall length keeps the screw profile minimal while still delivering sufficient engagement for steel or alloy substrates when used with appropriate inserts or pre-tapped holes. For precision workshops and production lines, this translates into steadier joints and predictable torque behaviour during tightening operations. Tool compatibility and assembly workflow This fastener is specified for use with a T7 hex key, supporting standard hand and torque-driver processes common in small-component assembly. Compatibility with a dedicated driver reduces the chance of cam-out and improves assembly speed on repetitive tasks, promoting efficient throughput on production benches. The concise geometry also minimises obstruction around the head, simplifying handling during automated or semi-automated assembly. For further specification or to secure supply of this Teknik Cutting Tools Torx screw (TC059TM), contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt advice and ordering assistance Technical data Article number: TC059TM Name: Torx screw Manufacturer: Teknik Makina Facts Weight: 0.1 kg Diameter: 3 mm Thread: M2.2 Overall length: 5 mm Angle: 60° Features Suitable tool: Hex key T7 ECLASS: 21189290 FAQ Which driver fits this screw best? The screw is designed for use with a T7 hex key; the specification for the Teknik Cutting Tools Torx screw (TC059TM) indicates a T7 driver for secure engagement. What thread size does the screw use? This fastener uses a M2.2 thread, providing fine engagement for small components and precision assemblies. Is the head suitable for countersunk applications? Yes, the 60° head angle is intended for countersunk seating, giving repeatable alignment in prepared holes. For which applications is this fastener intended? The component is intended for compact assemblies and fixtures, such as small mechanical housings, instrument brackets and densely packed electronic assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

6.2mm Torx Screw M3 60° Head, T8 Hex Key Compatible - Teknik Makina

Reliable fastening for compact assemblies: combine metric consistency and secure Torx drive with a slim profile and predictable torque behaviour for efficient, repeatable production. Order the Torx screw directly via Metav Werkzeuge or ask our consultants if needed. Torx screw TC064TM — M3 thread, Torx drive (Teknik Makina) The Torx screw is a compact M3 fastener designed for secure mechanical joins where space is limited and repeatability matters M3 metric thread, precision-formed 3.8 mm head diameter for compact fit Torx drive compatible with T8 key Compact design for confined assemblies The compact geometry of this fastener, with a M3 thread, a head diameter of 3.8 mm and a total length of 6.2 mm, delivers a small installation footprint while preserving clamping strength. In practice, the reduced head diameter allows components to be fastened close to edges or inside tight housings without imposing bulky clearances. The metric specification supports interchangeability with standard M3 components, making procurement and inventory simpler and reducing assembly errors. This combination of dimensions ensures a predictable fit and easy integration into product designs where space efficiency is essential. Torque control and reduced cam‑out with Torx drive Equipped with a Torx T8 drive, the fastener enables improved torque transfer compared with slotted or Phillips drives, which helps avoid stripping and ensures consistent tightening across production runs. The Torx geometry engages the driver over a larger surface area, reducing the risk of cam‑out and making manual or powered assembly more reliable. For operations that specify a torque setting, this drive form supports controlled torque application, leading to fewer reworks and a steadier assembly process. Compatibility with a standard T8 tool streamlines maintenance and tool selection on the shop floor. Consistent production quality for repeatable results Manufactured by Teknik Makina and listed under TC064TM, this fastener is produced to metric tolerances that support uniform performance in series production. The precision dimensions promote consistent clamping behaviour and predictable mechanical characteristics across batches, which is particularly valuable in small‑part assemblies and electronics where tight tolerances matter. Although no coating or material specification is provided in the basic data, the screw’s metric conformity and Torx drive make it a straightforward choice for engineers seeking a compact, reliable solution for repeatable fastening tasks. For reliable, metric fastenings from Teknik Makina, request TC064TM through Metav Werkzeuge — our team in Emmerich provides stock and ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TC064TM Name: Torx screw Manufacturer: Teknik Makina Facts Weight: 0.1 kg Diameter: 3.8 mm Total length: 6.2 mm Angle: 60° Thread: M3 Special features Torx drive, compatible with T8 key Metric M3 thread Compact head diameter for tight spaces FAQ What thread does this screw use? The TC064TM is supplied with a M3 metric thread suitable for standard M3 mating parts. Which driver size is required for the Torx drive? The fastener uses a Torx T8 drive; a T8 tool engages the recess correctly. What are the main dimensions of the fastener? The product data shows a head diameter of 3.8 mm and a total length of 6.2 mm for the TC064TM Torx screw. Is the material or coating specified for this screw? No material or coating is specified in the provided technical data for this screw; the entry lists dimensions, thread form and drive type only. Is this fastener suitable for precision assemblies? Yes. The metric dimensions and Torx drive make TC064TM appropriate where compact size and repeatable torque control are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

6.2mm Torx Screw M4.5 11mm, 60° - Teknik Makina

Take advantage of a compact Torx screw that combines secure Torx T15 drive compatibility, a standard M4.5 thread and a countersink-friendly 60° head for consistently flush assemblies; order directly through Metav Werkzeuge or contact our consultants for specification support. Torx screw TC080TM — M4.5 × 11 mm, Torx T15 by Teknik Makina A Torx screw intended for standard workshop and assembly applications, offering an M4.5 thread and an 11 mm total length for reliable, repeatable fastening. Torx T15 drive compatible Thread M4.5 for standard fittings 11 mm total length 60° head angle for flush fastening Precise fastening for repeatable assembly results The compact fastener delivers mechanical reliability by combining a standard M4.5 thread with a short, controlled shank. The combination of a metric thread and a shallow overall length results in predictable clamping behaviour when used in pre-tapped holes or with matching threaded inserts. Matching the drive to a Torx T15 tool reduces cam‑out and torque loss during installation, contributing to consistent joint preload and fewer reworks. The specification supports process stability in small- to medium-scale assemblies where repeatability matters. Tool compatibility and installation efficiency The head geometry, given as a 60° angle, indicates suitability for countersunk or flush mounting where a low-profile finish is required. The Torx interface paired with a T15 driver enables efficient torque transfer and precise positioning, which speeds up automated and manual assembly steps alike. Reduced cam‑out extends driver bit life and lowers the incidence of damaged heads; the fastener’s dimensions (diameter 6.2 mm, thread M4.5, total length 11 mm) make it a practical choice for compact components and confined installation spaces. Workshop readiness and supply reliability Technical simplicity and conformity to familiar standards make this fastener straightforward to specify across procurement and production documents. The item’s listed mass (0.1 kg) is useful for logistics and inventory planning. Sourcing via a trusted partner helps maintain continuity of supply: Metav combines a broad product range with a quality filter at its Emmerich site, backed by long‑standing industry relationships and an established customer base of over 48,000 customers. For procurement planners and workshop managers, the combination of standard sizing and trusted distribution reduces administrative overhead and supports uninterrupted assembly operations. For availability checks, compatibility advice or to secure Teknik Makina stock through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt assistance Technical data Article number: TC080TM Designation: Torx screw Manufacturer: Teknik Makina eClass: 21189290 Facts Diameter: 6.2 mm Thread: M4.5 Total length: 11 mm Head angle: 60° Weight: 0.1 kg Special features Torx drive: T15 compatible Countersink geometry indicated Standard workshop fastener FAQ What driver fits this screw? The Torx screw TC080TM is compatible with a Torx T15 driver for optimal torque transfer and reduced cam‑out. Is the head suitable for a flush finish? Yes, the head angle of 60° on the TC080TM is intended for countersunk applications and provides a low‑profile finish when installed correctly. What are the core dimensions of the fastener? Diameter 6.2 mm, thread M4.5 and total length 11 mm are the primary dimensions of the TC080TM. Is this fastener suitable for automated assembly? The Torx interface (T15) and standard metric thread make the TC080TM well suited to both manual and automated assembly processes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

6.3mm Screw For Shim M5 9mm, Allen Key 4 - Teknik Makina

Take advantage of a compact fastening solution with a standard M5 metric thread and a short 9 mm overall length for secure, space-saving joins; the small 6.3 mm diameter shank ensures precise alignment in narrow assemblies. Order the part directly via Metav Werkzeuge or request guidance from their consultants for integration into production. Screw TC048TM by Teknik Makina — M5 thread, 9 mm length A Screw TC048TM engineered for fastening shims and U‑plates in workshop and industrial assemblies, offering a compact profile for tight installation spaces M5 metric thread for standard fittings 9 mm total length for compact assemblies 6.3 mm diameter shank for precise alignment Compatible with 4 mm Allen key Precise fit for compact assemblies The M5 metric thread paired with a 9 mm overall length delivers a reliable fastening solution where space is limited. This configuration reduces protrusion while maintaining clamping force, which benefits machine housings, bracketry and layered fixtures. The 6.3 mm shank diameter aids repeatable positioning, so components remain true to alignment during assembly and service, supporting consistent production quality with minimal adjustment. Straightforward installation that speeds assembly Installation is simplified by compatibility with a 4 mm Allen key, enabling rapid torque application and straightforward access even in confined areas. The hex drive arrangement reduces cam‑out and makes manual or machine-assisted tightening efficient. For production environments, this translates to reduced assembly time per unit and lower risk of damage to mating parts, a clear operational advantage during high‑volume or repetitive tasks. Application guidance for shims and U‑plates Designed specifically for use with shims and U‑plates, the fastener is suited to precision positioning and repeatable fixture setups. The short overall length is optimal where countersinking is undesirable or where minimal clearance is required above the mating surface. In retrofit and maintenance scenarios, the screw’s dimensions support quick replacement and reinstatement of alignment, preserving component tolerances without elaborate disassembly. Traceability and workshop logistics Marked with SKU TC048TM, this fastener can be tracked within inventory and bill‑of‑materials systems to simplify reordering and quality checks. At just 0.1 kg per unit in bulk handling terms, storage and handling requirements are modest. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the part integrates into existing supply chains with predictable availability and straightforward documentation for purchasing and audit trails. For dependable fastening components from Teknik Cutting Tools, contact Metav Werkzeuge for order placement and tailored advice — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TC048TM Designation: Screw for shim / U‑plate Manufacturer: Teknik Makina Facts Weight: 0.1 kg Diameter: 6.3 mm Thread: M5 Total length: 9 mm Special features Intended for shims and U‑plates Hex drive compatible with 4 mm Allen key Compact profile for narrow assemblies FAQ What are the main dimensions and thread of this fastener? The screw features an M5 thread with a 6.3 mm shank diameter and a 9 mm total length, suitable for compact fastening tasks. Which tool is required to install the fastener? Installation is performed with a 4 mm Allen key, which matches the hex drive of the screw for secure tightening. Can this screw be used with shims and U‑plates? Yes — the design is intended specifically for shims and U‑plates and provides precise alignment for layered assemblies. How is the item identified for reordering and inventory? The part is listed under SKU TC048TM, allowing straightforward tracking in procurement and stock systems. Who manufactures and distributes this screw? Manufactured by Teknik Makina and supplied through Metav Werkzeuge, the component is intended for workshop and industrial use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

6.5mm Torx Screw M2.5, Angle 50° - Teknik Makina

Combine secure M2.5 threading with a compact 6.5 mm overall length for reliable, space-saving fastening in precision assemblies; order the TC061TM Torx screw directly via Metav Werkzeuge or contact our consultants for application guidance. Torx screw TC061TM – M2.5 thread, 3.5 mm diameter | Teknik Makina The Torx screw TC061TM is a compact fastener engineered for fine mechanical assemblies and constrained installation spaces, suitable where small, precise fixings are required. M2.5 metric thread for fine assemblies 3.5 mm head diameter for compact fit 6.5 mm overall length for shallow fixings Compatible with hex key T8 Precise thread geometry for dependable connections The compact fastener is designed around an M2.5 metric thread, which provides consistent engagement in small component housings and precision fixtures. A fine thread like M2.5 delivers predictable clamping force with reduced risk of loosening under light dynamic loads, making it well suited to instrument housings, control panels and delicate assemblies. The nominal head diameter of 3.5 mm and the short 6.5 mm overall length reduce protrusion and allow secure seating in shallow countersunk or through-hole applications. The specified 50° head-related angle supports secure torque transfer and consistent seating geometry when paired with compatible fastener seats. These dimensional details enable engineering teams to predict fit and tolerance behaviour and to integrate the fastener into CAD models and BOMs without ambiguity. Tool compatibility and efficient assembly workflow Installation efficiency is supported by a declared compatibility with hex key T8, so the fastener integrates smoothly with common workshop tool sets and automated assembly drives that accept T8 tooling. Where repeatable insertion speed and low-cycle torque control matter, the combination of compact dimensions and a standard driver interface speeds assembly and reduces handling time. For maintenance and disassembly procedures, the standardised drive size simplifies spare-part management. The screw’s lightweight specification (0.1 kg as an item reference) minimises additional mass in weight-sensitive assemblies and reduces transport and handling burdens when ordered in larger quantities. Clear specification of driver compatibility and dimensional parameters helps production planners select the correct feed and torque settings for reliable, repeatable results on the shop floor. Sourcing confidence and fit-for-purpose supply Sourced from Teknik Makina, the component is positioned for use in precision workshops and production environments where repeatability and part traceability matter. Procuring through Metav Werkzeuge adds the advantage of an established European distribution channel and a quality filter at the Emmerich hub, supporting reliable delivery and centralised purchasing for industrial buyers. The product’s concise dimensional set simplifies inventory classification and reduces the chance of installation errors: engineers and buyers can reference the M2.5 thread, 3.5 mm head diameter and 6.5 mm length when preparing assembly sheets or ordering spares. For applications that demand tight fitment and minimal clearance usage, this fastener offers a compact, industry-standard solution that aligns with efficient workshop logistics and quality-conscious procurement. For precise small-component fastening, choose the Teknik Makina TC061TM and contact Metav Werkzeuge for tailored procurement support and specification advice. Technical data Article number: TC061TM Manufacturer: Teknik Makina SKU: TC061TM Data Diameter: 3.5 mm Thread: M2.5 Overall length: 6.5 mm Angle: 50° Weight: 0.1 kg Special features Drive compatibility: hex key T8 Product type: Torx screw Intended use: precision assemblies, shallow fixings Origin: Teknik Makina FAQ What is the thread size of this fastener? The Teknik Makina Torx screw TC061TM is specified with an M2.5 metric thread for fine mechanical connections. Which driver fits the TC061TM? The TC061TM is listed as compatible with a hex key T8, enabling use with common T8 tooling for installation. What are the main dimensions to consider? Key dimensions are 3.5 mm head diameter, 6.5 mm overall length and a 50° head angle, which together determine seating and clearance requirements. Is the TC061TM suitable for confined or shallow spaces? Yes — the short 6.5 mm length and compact 3.5 mm head diameter make the TC061TM appropriate for shallow fixings and restricted installation areas. Can this fastener be used in precision instrument assemblies? The fine M2.5 thread and compact geometry make the TC061TM appropriate for many precision assemblies where small, reliable fastenings are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

6.65mm Pipe Dowel Pin 5.5mm Length, Solid Steel - Teknik Makina

Take advantage of a compact, precision-made locating solution that combines consistent dimensional accuracy and fast integration into cutting-tool assemblies — ideal for streamlining insert changes and reducing set-up time. Order or request procurement support via Metav Werkzeuge for reliable supply and delivery. Hollow pin TS-3TM — tubular locating pin for indexable inserts, Ø 6.65 mm, 5.5 mm length (Teknik Cutting Tools) Hollow pin for securing indexable inserts in cutting tool pockets; suited to industrial and workshop use Precision Ø 6.65 mm fit Short overall length 5.5 mm Suitable for indexable inserts Tubular locating design Consistent locating and repeatability for production workflows The hollow pin TS-3TM is manufactured to deliver reliable locating performance in insert-mounted cutting systems. With a nominal diameter of Ø 6.65 mm and an overall length of 5.5 mm, the component provides a defined contact geometry that reduces play between the insert and the tool pocket. This dimensional consistency shortens set-up time and helps maintain repeatable tool position between insert changes, supporting efficient machining cycles in small-batch and serial production alike. Compact form factor that reduces interference and simplifies assembly A short, tubular locating element like the TS-3TM minimises protrusion into the work area while still delivering secure positioning. The tubular design allows easy insertion into appropriately prepared pockets and avoids excessive bulk at the cutting edge. The low mass (approx. 0.1 kg) contributes negligible inertia, which is beneficial where multiple rapid insert changes or high-frequency indexing are required. Integration guidance and practical benefits for workshop teams For integration, match the pin diameter and length with the toolholder’s seat and the insert’s bore geometry to ensure correct engagement. The TS-3TM has been designed for straightforward placement in indexable-insert assemblies, supporting faster maintenance and less downtime. Where toolholder specifics differ, selecting the correct locating element avoids stress concentrations and maintains consistent cutting performance. Reliability through professional sourcing and supply Procured via Metav’s distribution channels, this locating pin benefits from Metav’s quality control and stock management in Emmerich. Metav supplies a broad range of precision components and ensures dependable delivery to workshops and industrial customers, helping to consolidate sourcing and reduce supplier complexity. Contact Metav Werkzeuge for technical compatibility checks and procurement of the TS-3TM hollow pin; phone +49 2822 7131930 or email info@metav-werkzeuge.com for immediate assistance Technical Data Article number: TS-3TM Name: Hollow pin (Rohrstift) Manufacturer: Teknik Makina Facts Diameter: 6.65 mm Overall length: 5.5 mm Weight: 0.1 kg SKU: TS-3TM Special features Suitable for indexable inserts Tubular locating design Compact form for minimal protrusion FAQ What is the primary application of this locating pin? The TS-3TM hollow pin is intended to locate and position indexable inserts in tool pockets, enabling repeatable seating and stable cutting geometry. Which dimensions are critical when selecting this pin? Key dimensions are the Ø 6.65 mm diameter and the 5.5 mm overall length; the weight is approximately 0.1 kg for handling and inventory considerations. Will the TS-3TM fit my existing toolholder? Compatibility depends on the toolholder pocket and insert bore dimensions; the TS-3TM is designed for standard insert mounting scenarios but checking seat geometry against Ø 6.65 mm and 5.5 mm is recommended. Is this component suitable for industrial workshop use? Yes — the TS-3TM is designed for robust integration into workshop and production settings where consistent locating and quick insert changes are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

6.7mm Screw For Shim M3, 5.5mm Diameter - Teknik Makina

Take advantage of a compact, industry-standard fixing solution with an M3 thread, a Ø 5.5 mm profile and a total length of 6.7 mm for dependable assembly performance; order through Metav Werkzeuge or consult the team for application advice. Screw for Shim — M3 thread, compact fixing for U-plate applications by Teknik Cutting Tools The Screw for Shim is a compact fastening component designed for secure attachment of U-plates and shims in workshop and assembly environments, offering a standard metric thread for consistent, repeatable installation. M3 thread for standard metric fittings Ø 5.5 mm compact head diameter Overall length 6.7 mm for tight assemblies Compatible with T15 hex key Precise fixing that keeps assemblies true A small, accurately produced fastening element delivers measurable benefits in repeatable assemblies. The M3 thread provides a familiar metric interface that simplifies integration into tapped holes and standard fixtures, while the Ø 5.5 mm dimension defines a compact profile suitable for constrained spaces. This results in less play at the joint and a more stable overall structure, reducing the need for rework and improving process reliability. Reduced downtime through predictable installation Consistent geometry and a short overall length make this component favourable where speed and predictability matter. The 6.7 mm total length permits secure engagement without unnecessary protrusion, helping to avoid interference with mating parts. Compatibility with a T15 hex key streamlines assembly operations, enabling rapid torquing with common workshop tools and lowering the risk of stripping during installation. Easy sourcing and simple stock management The screw is lightweight and compact, which benefits both logistics and handling in production and maintenance stock. Delivered under SKU TC062TM, this component is readily specified for mounting shims and U-plates and is suitable for standard workshop use. The combination of standard metric thread, compact dimensions and proven tooling compatibility supports efficient procurement and spare-part strategies. For robust, compact fastening choose the Teknik Cutting Tools M3 screw and contact Metav Werkzeuge in Emmerich for tailored supply and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TC062TM ECLASS: 21189290 Manufacturer: Teknik Cutting Tools Facts Diameter: 5.5 mm Thread: M3 Overall length: 6.7 mm Weight: 0.1 kg Special features Compatible with T15 hex key For Shim / for U-plate Compact profile for tight assemblies FAQ What size and thread does this fixing use? The Screw for Shim is specified with an M3 thread and a diameter of 5.5 mm, listed under SKU TC062TM. Is a special tool required for installation? Installation is carried out with a T15 hex key, making the component compatible with common workshop tooling. What applications suit this fastener? The component is intended for securing shims and U-plates where a compact, metric-threaded fastening is needed; it is suitable for general assembly and workshop use. Which company produces this part? This fastening component is manufactured by Teknik Cutting Tools and distributed under SKU TC062TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

6.7mm Torx Screw M4 11mm Length T15 Hex Key Compatible - Teknik Makina

Reliable fastening performance is achieved through the combination of a Torx drive and a metric M4 thread, delivering secure joints in confined assemblies; the compact 11 mm overall length and 6.7 mm diameter support space-saving designs. Order via Metav Werkzeuge or consult the technical team for application guidance. Torx Screw — M4 thread, 11 mm overall length (Teknik Makina) A Torx Screw engineered for reliable mechanical fastening in industrial and workshop settings, offering a compact profile and Torx-compatible drive for stable torque transmission. Torx head for high torque transfer Metric M4 thread for standard fastening Compact 11 mm length for tight spaces 60° seat angle for precise seating Secure joints with compact dimensions The compact profile combines a metric M4 thread with a modest overall length of 11 mm, making this fastener well suited to assemblies where space is limited. The modest 6.7 mm diameter maintains a low profile without compromising clamping force; when paired with a properly sized threaded hole or insert, the result is a consistent mechanical connection. The technical design supports repeatable installation in production or repair tasks and reduces the need for post-assembly rework. Reliable torque transfer and tool compatibility A Torx drive provides superior torque transmission compared with slotted or Phillips heads, reducing cam-out and wear on both the fastener and the tool. This component is compatible with a T15 Torx key, enabling efficient installation with power or hand tools commonly used in workshops. The 60° seating angle facilitates accurate countersinking where required, ensuring the fastener sits flush and distributes load evenly across the mating surface. Assembly efficiency and procurement confidence From a procurement perspective, the straightforward specification—M4 thread, 11 mm length, 6.7 mm diameter—simplifies component selection and inventory management. The item’s modest mass (0.1 kg) supports easy handling and predictable packaging. Specifiers and purchasing teams benefit from the clear technical parameters for CAD models, bill of materials and quality checks, while production staff gain a dependable, repeatable fastener for everyday applications. For workshop-grade fastening and bulk supply, trust Teknik Makina’s Torx screw and contact Metav Werkzeuge for procurement and technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TC078TM Manufacturer: Teknik Makina ECLASS: 21189290 Weight: 0.1 kg Dimensions & thread Diameter: 6.7 mm Thread: M4 Overall length: 11 mm Angle: 60° Design & compatibility Drive type: Torx Compatible key: T15 Torx key FAQ What driver is required for installation? This Torx screw (Teknik Makina, fastener, SKU TC078TM) is driven with a T15 Torx key or a compatible T15 Torx bit for power tools. What are the thread and external dimensions? The fastener has a metric M4 thread, an overall length of 11 mm and a diameter of 6.7 mm as specified for SKU TC078TM from Teknik Makina. How does the 60° angle affect seating? The 60° angle defines the seating geometry to allow a flush countersunk fit; when combined with appropriate matching countersink geometry, the screw distributes load evenly. Is this fastener suitable for compact assemblies? Yes, the short 11 mm overall length and modest 6.7 mm diameter make this Torx screw (Teknik Makina, SKU TC078TM) suitable for confined or low-profile assemblies. What advantages does a Torx drive provide over other head types? A Torx drive reduces cam-out and allows higher torque transfer with less tool wear, improving installation reliability for recurring production tasks such as those performed with SKU TC078TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

7.7mm Screw For Shim M5, Allen Key 3.5mm - Teknik Makina

Take advantage of a compact, metric fastening solution that combines M5 conformity with a 7.7 mm total length for secure, low‑profile assemblies; purchase genuine Teknik Makina parts through Metav Werkzeuge or request targeted advice for integration into precision fixtures. TC049TM screw — M5 thread, 7.7 mm, Teknik Makina A TC049TM screw engineered for securing shims and U‑plates in compact mechanical assemblies and precision adjustment tasks. M5 metric thread for standard fittings Total length 7.7 mm for compact assembly Hex socket compatible with 3.5 mm Allen key Produced by Teknik Makina for industrial use Secure, precise fastening for small assemblies The compact metric design delivers a reliable connection where space and repeatability matter. The M5 thread is a standard in industrial metrology and workshop fixtures, providing predictable engagement and compatibility with common threaded inserts and tapped holes. With a 7.7 mm total length, the fastener offers a low‑profile solution that reduces protrusion and minimises interference in tight assemblies. The combination of metric accuracy and short length is particularly suitable for shims, U‑plates and other fine‑adjustment components where clamping force must be consistent without fouling adjacent parts. Faster installation and consistent clamping force Installation is simplified by the hex socket geometry, designed for a 3.5 mm Allen key — a tool size commonly found in workshop toolkits and assembly stations. This compatibility reduces changeover time and helps maintain torque consistency across multiple assemblies, supporting process reliability. The fastener’s modest mass (0.1 kg) and standardised geometry enable predictable handling and automated feeding where required, contributing to shorter assembly cycles and fewer stoppages during production. Where precision adjustments are necessary, the repeatable engagement of the metric thread supports fine tuning without loss of clamp integrity. Fit for purpose in precision and industrial contexts Specified for use with shims and similar components, the screw suits applications that prioritise alignment accuracy and mechanical stability. Manufactured by Teknik Makina, the component aligns with industrial production tolerances and is intended for routine use in workshops, jigs and fixtures. Where customers require verification of compatibility with specific assemblies or drawing tolerances, technical data and drawing references can be provided to ensure correct selection. The straightforward function of this fastener — reliable thread engagement and simple tool access — supports efficient maintenance and reduces the likelihood of assembly errors. For procurement or technical clarification on Teknik Makina fasteners, contact Metav Werkzeuge in Emmerich for focused advice and reliable delivery to your workshop Technical data Article number: TC049TM Manufacturer: Teknik Makina eClass: 21189290 Facts Thread: M5 Total length: 7.7 mm Weight: 0.1 kg Key size: 3.5 mm Allen Materials & features Application: for shim / U‑plate Hex socket head for Allen key drive Suitable for industrial assembly and fixtures FAQ What thread and length does this screw use? The screw uses an M5 metric thread with a total length of 7.7 mm; the TC049TM specification provides these nominal dimensions for compact assemblies. Which tool is required to install the fastener? Installation requires a 3.5 mm Allen key; the hex socket drive of the TC049TM fastener is designed for that tool size to ensure consistent torque application. Is the fastener suitable for securing shims and U‑plates? Yes, the component is designated for use with shims and U‑plates and is engineered to provide secure, low‑profile clamping in such applications. Who manufactures the screw and where can additional specifications be obtained? The screw is produced by Teknik Makina; detailed technical specifications and compatibility checks can be supplied on request for the TC049TM item. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

7mm Dowel Pin Smooth Finish, 7.71mm Diameter - Teknik Makina

Take advantage of the combination of consistent locating, compact dimensions and reliable European supply to keep assemblies precise and downtime low — order through Metav Werkzeuge or request tailored stock information from our team. Hollow dowel pin TS-4TM — Tubular locating pin, Ø 7.71 mm · 7 mm long · Teknik Makina Hollow dowel pin TS-4TM offers a compact locating solution for assembly and fastening applications where a slim, resilient pin is needed for repeatable positioning Hollow tubular pin for precise locating Diameter 7.71 mm for standard fits Length 7 mm for compact assemblies Teknik Makina manufacturing quality Consistent positioning through precise form The TS-4TM hollow dowel pin is designed for consistent locating in repetitive assembly tasks. With a diameter of 7.71 mm and an overall length of 7 mm, the part delivers predictable seating and minimal radial play, which reduces alignment rework and speeds up assembly cycles. In practical terms, a precisely sized locating pin keeps mating parts centred and helps maintain tolerances across production runs — a rational improvement in process reliability. Tubular design that simplifies insertion and absorbs misalignment The tubular construction of this pin provides a small degree of compressibility compared with solid pins; this feature facilitates straightforward press-fit or light interference installation in soft-to-medium bores. The design therefore reduces the risk of jamming during assembly and helps accommodate minor bore variations without compromising joint integrity. The combination of compact length and hollow body makes the component ideal where space is limited but positional accuracy remains essential. Workshop advantages, availability and procurement confidence With a listed mass of 0.1 kg, the TS-4TM is easy to handle in manual and automated processes and integrates well into kitting and inventory workflows. Sourcing the pin via Metav Werkzeuge ensures access to a European distribution point that acts as a quality filter, simplifying procurement and stock management for workshops and production lines. Specifying a dedicated locating pin like this reduces installation time and contributes to greater overall equipment effectiveness. For reliable supply of the Teknik Makina TS-4TM hollow dowel pin and to discuss batch availability or compatible sizes, contact Metav Werkzeuge — reach out via info@metav-werkzeuge.com or call +49 2822 7131930 to align the component with production needs. Technical data Article number: TS-4TM Manufacturer: Teknik Makina ECLASS: 21189290 Dimensions & weight Diameter: 7.71 mm Overall length: 7 mm Weight: 0.1 kg Features Type: hollow dowel pin (tubular pin) Application: locating / positioning in assemblies FAQ What are the exact dimensions of this pin? The hollow dowel pin TS-4TM has a diameter of 7.71 mm and an overall length of 7 mm; the listed weight is 0.1 kg. What applications is the TS-4TM suitable for? The TS-4TM tubular pin is intended for locating, alignment and light fastening tasks in assemblies where a compact, resilient locating element is required. Is the material or coating specified for this pin? Material and coating are not specified in the provided data for the TS-4TM; selection should be matched to application demands and environmental conditions. Can this pin accommodate small bore variations during assembly? The hollow, tubular geometry of the TS-4TM allows slight compression and can accommodate minor bore tolerances better than a solid pin, aiding insertion and reducing jamming risks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

7mm Screw For End Mill M3 Thread, 4.2mm Diameter - Teknik Makina

Take advantage of a compact fastening solution that combines precise thread geometry and a short overall length for reliable cutter clamping; order or request procurement advice via Metav Werkzeuge for seamless supply and technical matching. Screw for End Mill — M3 thread, 7 mm overall length (Teknik Makina) The Screw for End Mill is a compact fastening component designed to secure milling cutters and their holders in CNC and tooling applications. M3 thread for secure fastening 7 mm overall length for compact assemblies Compatible with T8 Allen key for easy tightening 4.2 mm head diameter for standard clamping pockets Stable clamping for improved tool performance A precise M3 thread combined with a short 7 mm overall length delivers a compact fastening that keeps toolholders firmly seated. This reduces micro-movement during operation, which helps to maintain repeatable cutting geometry and lowers the risk of premature edge wear in both roughing and finishing passes. The design supports efficient changeovers in high-mix CNC environments by providing a predictable clamping behaviour that operators and maintenance teams can rely on. Straightforward fitting with standard tools and holders Compatibility with a T8 Allen key simplifies installation and torque application in workshop settings. The screw’s 4.2 mm head diameter matches common insert and clamping-pocket dimensions found on many end mill assemblies, making it suitable for routine replacements and maintenance tasks. Reference TC170TM when ordering or checking drawings to ensure the fastener matches existing toolholder threads and pocket sizes. Inventory and procurement made practical Lightweight and compact, this fastening component is easy to store and manage as part of a spares kit. Sourcing through a stable distributor reduces downtime risk: Metav’s European stock and logistics model offer a transparent supply chain and the option to consolidate multiple tooling items in one order. The combination of a standard thread form and widely used actuation method means fewer special tools and less administrative overhead for purchasing and stores management. For availability, compatibility checks or to procure the Teknik Makina fastening screw TC170TM directly from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical advice and order processing. Technical data Article number: TC170TM Manufacturer: Teknik Makina Thread: M3 Head diameter: 4.2 mm Overall length: 7 mm Weight: 0.1 kg Suitable for: end mill assemblies Tool for fitting: T8 Allen key FAQ What is the thread size of this fastening screw? The fastening screw uses an M3 thread, specified on the technical listing for the Screw for End Mill (TC170TM) from Teknik Makina. Which tool is needed to tighten the screw? A T8 Allen key is indicated for installation and tightening of the screw supplied as Screw for End Mill TC170TM. Will this screw fit standard end mill clamping pockets? The screw’s 4.2 mm head diameter and M3 thread are intended for commonly used clamping pockets; confirm dimensions against the toolholder drawing and reference TC170TM when checking compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

7mm Torx Screw M3, 60° Angle, T8 Hex Key Compatible - Teknik Makina

Take advantage of the compact combination of a Torx drive, an M3 thread and a precise 4.2 mm diameter for secure, repeatable fastening in confined assemblies; order directly via Metav Werkzeuge or request consultancy if technical clarification is required Torx screw TC065TM — M3 thread, 7 mm length by Teknik Makina A Torx screw designed for small, high-torque assemblies where a T8 drive and a short 7 mm shank deliver reliable clamping in limited spaces M3 thread for standard metric fastening Torx drive for high torque transfer 4.2 mm diameter for precision fit Consistent clamping where space is limited The M3 thread combined with a 7 mm overall length provides a compact fastening solution suited to assemblies with restricted depth. Specified dimensions allow predictable engagement in thin panels and small components, reducing the risk of over‑penetration and ensuring repeatable clamp force. Where assembly tolerances matter, the screw’s nominal 4.2 mm diameter supports a snug fit through drilled or preformed holes, helping to maintain positional accuracy in production runs. Efficient torque transmission with Torx drive A Torx head geometry delivers substantially improved torque transmission compared with slotted or Phillips alternatives. The internal star profile minimises cam‑out and enables higher tightening values using a T8 key, which promotes faster assembly cycles and reduces tool wear. For operations that prioritise process efficiency, this drive style supports consistent torque application, lowering the rate of rework and enhancing joint reliability. Thread reliability and material handling Metric thread form M3 is a recognised standard across industrial and electronic applications; it simplifies parts selection and streamlines inventory management. The screw’s thread specification supports positive engagement with common mating materials and inserts, helping to protect thread integrity under repeated assembly and disassembly. Where vibration resistance and mechanical stability are required, this metric fastener provides a well‑understood basis for designing secure joints. Suitable uses and practical benefits This fastener is ideal for compact mechanical assemblies, small housings, electronic enclosures and precision brackets. The short length and Torx drive make it particularly appropriate for assembly processes where space and access are constrained. Using a standard Torx key improves ergonomics for operators and decreases cycle time, while the clear dimensional data allows planners to calculate tolerances and interference fits reliably. Supply reliability and quality assurance from Metav Sourced from Teknik Makina and distributed via Metav Werkzeuge, the component aligns with procurement strategies that favour availability and consistent quality. Centralised sourcing through Metav reduces vendor complexity and helps maintain uninterrupted supply to the workbench. For technical clarification or to confirm compatibility with specific assemblies, Metav’s team can provide guidance and further specifications. Contact Metav Werkzeuge for supply information or technical advice on the Teknik Cutting Tools Torx screw TC065TM; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TC065TM Manufacturer: Teknik Makina eClass: 21189290 Facts Weight: 0.1 kg Diameter: 4.2 mm Thread: M3 Overall length: 7 mm Angle: 60° Special features Torx drive Suitable for T8 Torx key Compact length for limited installation depth Suitable for precision assemblies FAQ What is the thread size of this fastener? The fastener uses an M3 metric thread, providing a standardised engagement suitable for many small engineering and electronic applications. Which driver is required to tighten the screw? A T8 Torx key is specified for this Torx screw, enabling secure torque transfer and minimising cam‑out during assembly. Is the screw suitable for use in tight or shallow housings? Yes, the short 7 mm overall length is intended for confined installation spaces where a compact fastener is required. Who supplies this component and where can further technical details be obtained? The part is supplied by Teknik Makina and distributed via Metav Werkzeuge; additional technical data and procurement assistance are available from Metav. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

7mm Torx Screw T8 Compatible, M3 Thread, 60° Angle - Teknik Makina

Compact fastening performance from a familiar industrial standard: the combination of M3 thread, 7 mm overall length and Torx T8 drive delivers secure, repeatable assembly for small fixtures and electronics; order the TC065-1TM directly via Metav Werkzeuge or consult their specialists for compatibility guidance. Torx screw TC065-1TM — M3 thread, 7 mm overall length, Torx T8 drive by Teknik Cutting Tools A Torx screw engineered for precise fastening in mechanical assemblies and small-scale production where compact, reliable connections are required. M3 thread for secure fastening 7 mm overall length Torx T8 drive compatibility Weight: 0.1 kg Reliable clamping with defined thread geometry for repeatable results The combination of an M3 thread and a short 7 mm overall length creates a fastener that is particularly suited to confined assemblies and component mounting where excess screw length is undesirable. The fine M3 profile provides good axial pull-in and resistance to loosening when mated with the correct mating thread, which supports precision fastening in jigs, housings and small enclosures. Specifying the correct thread also enables predictable torque control during assembly processes, improving cycle consistency on production lines. Drive design that reduces cam‑out and improves torque transfer The Torx T8 interface of this fastener offers a mechanical advantage over traditional slotted or cross drives: the star‑shaped recess allows higher torque without the driver slipping, reducing wear on both tool and head and lowering the risk of damaged fasteners during installation. The data lists a head angle of 60°, which aids firm seating in a matched countersink and helps establish a consistent clamp force. For assembly operations that require reliable torque application and minimal rework, the Torx geometry supports efficient, repeatable results. Practical compatibility and handling notes for workshop and production use Article identification TC065-1TM and the manufacturer designation indicate a standard industrial component intended for general mechanical tasks. Drive compatibility is listed as Torx T8 (Inbussschlüssel T8); it is advisable to use the correct T8 driver to achieve the intended torque and avoid shearing the head. The catalogue entry records a weight of 0.1 kg, which should be taken as the article weight reference from the supplier data. When incorporating this fastener into assemblies, match thread tolerances and ensure mating components are prepared for an M3 size to maintain joint integrity. For purchasing information or technical advice on the TC065-1TM from Teknik Cutting Tools, contact Metav Werkzeuge for order support and compatibility consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TC065-1TM Manufacturer: Teknik Makina eClass: 21189290 Facts Thread: M3 Overall length: 7 mm Head angle: 60° Weight: 0.1 kg Special features Drive compatibility: Torx T8 (Inbussschlüssel T8) Product type: Torx screw SKU: TC065-1TM FAQ What thread size does this fastener use? The fastener is specified with an M3 thread; TC065-1TM is intended for applications that accept M3 male or tapped female threads. Which driver is required for installation? Drive compatibility is listed as Torx T8 (Inbussschlüssel T8); a correctly sized T8 Torx driver should be used to achieve the expected torque and avoid head damage. Is the head angle relevant for countersinking? Yes — the entry lists a head angle of 60°, which supports firm seating in an appropriately prepared countersink and contributes to stable clamp force in assemblies using the TC065-1TM. How is the article identified for ordering or stock checks? This item is catalogued as TC065-1TM from Teknik Cutting Tools; reference the SKU TC065-1TM when enquiring with Metav Werkzeuge or placing an order. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

7mm Torx Screw T8 Hex Key Compatible, M2.5 Thread, 60° Head Angle - Teknik Makina

Take advantage of precise M2.5 threading, a compact 7 mm overall length and a defined 60° head angle for consistent driver engagement — ideal for tight assemblies and instrumentation; order the Torx screw directly via Metav Werkzeuge or consult our specialists if required. Torx screw TC063TM — M2.5 thread, 7 mm length (Teknik Makina) A Torx screw engineered for precision fastening in compact assemblies and instrument applications Torx head for secure torque transfer Thread M2.5 for fine metric engagement Diameter 3.5 mm for precision fit 60° head angle for controlled driver contact Precision fastening that reduces assembly rework This compact fastener delivers repeatable clamping through its M2.5 thread and narrow 3.5 mm diameter, designed for applications where space and tolerances are limited. The short 7 mm length reduces protrusion while maintaining sufficient engagement depth; this balance minimises the risk of part deformation or stripping during installation. The defined 60° head angle supports stable contact between driver and screw, contributing to predictable torque application and fewer assembly errors. Optimised for delicate and confined applications The small form factor of this Torx fastener suits electronics, instrumentation and other assemblies where clearance is at a premium. The compatibility with a T8 driver ensures a firm interface that translates rotational force into secure fastening with minimal cam‑out. In production environments, this results in faster cycle times and fewer rejects, enhancing overall process efficiency. Guidance on selecting the correct driver or torque setting is available from Metav Werkzeuge for integrations requiring particular fastening protocols. Confidence through industrial sourcing and support Specified and supplied by Teknik Makina, this Torx screw is classified under eClass 21189290, aligning with common procurement and inventory systems. Buying via Metav Werkzeuge gives access to a centralised stock point in Emmerich, a broad product range and long‑standing industry expertise — attributes that support reliable supply and traceable sourcing. For projects that demand consistency, choosing a standardised fastener from a recognised supplier reduces logistical complexity and supports predictable assembly quality. For reliable, compact fastening in precision assemblies, order the Teknik Makina Torx screw via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: TC063TM Product: Torx screw Manufacturer: Teknik Makina Classification: eClass 21189290 Suitable driver: T8 Facts Diameter: 3.5 mm Thread: M2.5 Overall length: 7 mm Head angle: 60° Weight: 0.1 kg Special features Torx head design Metric fine thread Compact length for confined spaces Supplier classification for procurement systems FAQ Which driver fits this fastener? Compatible with a T8 driver; the interface is designed for secure torque transfer and reduced cam‑out with a T8 driver when using the Torx screw TC063TM from Teknik Makina. What are the key dimensions of the fastener? The Torx screw features a 3.5 mm diameter, M2.5 metric thread and a 7 mm overall length, with a 60° head angle suitable for controlled engagement. Is this a standard metric thread? Yes — the fastener uses an M2.5 metric thread, which is compatible with standard M2.5 tapped holes and nuts. For which applications is the screw most suitable? This compact Torx screw is intended for precision assemblies, electronics and instrument applications where minimal protrusion and reliable engagement are required. How does the head angle affect installation? The 60° head angle improves driver contact and helps to maintain consistent engagement during tightening, supporting repeatable assembly quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

9.5mm Screw For Shim M5 12mm Length - Teknik Makina

Take advantage of a compact, metric fastening that combines a precise M5 thread, a low-profile 12 mm overall length and compatibility with common assembly tools for reliable shim and U-plate clamping; order directly via Metav Werkzeuge or consult the team for detailed application advice Screw for Shim (TC095TM) — M5 thread, 12 mm overall length, Teknik Makina The Screw for Shim is a dedicated fastening solution designed for secure attachment of U-plates and shims in workshop and light industrial applications M5 thread for secure clamping 12 mm overall length for low profile fit 9.5 mm head diameter for stable seating Reliable metric thread for consistent clamping results The threaded design with a M5 thread provides a predictable load-bearing capacity and repeatable torque response, making this fastener suitable where joint stability matters. The combination of M5 thread and a controlled head diameter ensures secure seating in shims and U-plate assemblies, reducing the risk of loosening under vibration. Specified as TC095TM, this part is intended for straightforward integration in production and maintenance workflows where metric fastenings are standardised Compact form factor that saves space and simplifies assembly With an overall length of 12 mm and a head diameter of 9.5 mm, the component keeps protrusion to a minimum and helps maintain neat, space-saving assemblies. The short length reduces interference with adjacent parts and speeds up handling during installation. Designed for use with an Allen key 3 mm, the fixing permits quick, tool-based tightening with common hex keys, streamlining fitting procedures on jigs, fixtures and mounting plates Clear specifications for procurement and workshop planning Key measurable attributes are presented for easy comparison and inventory management: Diameter 9.5 mm, Thread M5, Overall length 12 mm and Weight 0.1 kg. These values support purchasing decisions and ensure compatibility with existing shims and U-plate configurations. Supplied by Teknik Makina and stocked via Metav Werkzeuge, the item is positioned as a pragmatic choice where reliable metric fastenings are required Contact Metav Werkzeuge today for order placement or application guidance on Teknik Makina fastenings such as TC095TM; assistance and local supply details are available from Metav Werkzeuge in Emmerich Technical Data Article number: TC095TM Manufacturer: Teknik Makina Designation: Screw for Shim Facts Diameter: 9.5 mm Thread: M5 Overall length: 12 mm Weight: 0.1 kg Special features Fastening screw for U-plate / shim Compatible with Allen key 3 mm ECLASS: 21189290 FAQ What thread size does this screw use? The screw uses an M5 thread, specified for reliable metric fastening in shim and U-plate applications and identified as TC095TM by Teknik Makina. Is the screw suitable for U-plates and shims? Yes, the Screw for Shim (TC095TM) is designed specifically for securing shims and U-plate fittings with a stable head diameter and short overall length. Which tool is required for installation? Installation requires an Allen key size 3 mm, enabling fast and repeatable tightening with standard hex keys. What are the core dimensions to check for fitment? Key dimensions to verify are 9.5 mm head diameter, M5 thread, and 12 mm overall length for correct seating and clearance in assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Allen Screw - Teknik Makina

Comprehensive Technical Specifications: Order Number: 2ALLENTM Item: Allen Screw usable with Brand: Teknik Makina Metric Information: Weight: 0.1kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Bohrkopf Chamdrill

Gewired M5 Spring, For Calipers - Teknik Makina

Take advantage of a compact replacement that combines precise M5-thread compatibility with reliable, repeatable contact force for measuring instruments; order the spring directly via Metav Werkzeuge or consult the technical team for fitment confirmation. Spring BY041TM — Replacement spring for precision calipers, M5 thread (Teknik Makina) The Spring BY041TM is a compact replacement spring designed for precision calipers with an M5 threaded fitting, intended for instrument maintenance and workshop repair. Compatible with M5 threaded calipers Compact, space-saving design Simple screw-in replacement part Lightweight at 0.1 kg Consistent contact force for reliable readings A small component often determines measurement quality. The BY041TM spring provides a consistent contact force at the caliper jaw interface, which helps to reduce measurement scatter and supports repeatability in routine checks. For technicians and calibration staff, this stability translates into fewer re-measurements and a clearer assessment of part conformity. The thread compatibility ensures the coil seats correctly in standard M5 fittings used on many precision instruments. Straightforward replacement to reduce instrument downtime Maintenance procedures are simplified by the spring's screw-in arrangement for M5-threaded fittings. The replacement coil has been conceived for rapid installation, minimising workshop stoppage and lowering the effort required during on-site servicing of measuring tools. The easy replacement characteristic assists service routines, and the reliable fit reduces the risk of loosening or misalignment after reassembly. Tailored for workshops, labs and repair specialists Designed with routine instrument upkeep in mind, this spring is suited to calibration labs, inspection benches and repair workshops that maintain calipers and small measuring devices. The compact component supports a practical spare-parts strategy: keeping a small stock reduces lead times for repairs and preserves measurement capability across shifts. Support from Metav’s distribution and quality assurance in Emmerich underpins supply reliability and consistent availability. For application advice or to request the BY041TM spring for precision calipers, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fitment and order details. Technical data Article number: BY041TM eClass: 21189290 Weight: 0.1 kg Facts Thread compatibility: M5 Intended use: replacement spring for precision calipers Special features Compact design for space-restricted assemblies Simple screw-in installation for fast servicing FAQ What thread size does this spring fit? The BY041TM spring is specified for an M5 threaded fitting, suitable for many precision calipers and related measuring instruments. What is the weight of the BY041TM spring? The replacement spring BY041TM has a weight of 0.1 kg. Which users or environments benefit from this spring? Calibration laboratories, workshop repair benches and service technicians commonly use the BY041TM spring when maintaining or repairing precision calipers from Teknik Makina and similar manufacturers. How does the spring affect measurement quality? By providing a stable contact force, the BY041TM spring reduces variability at the jaw interface and helps to improve repeatability during comparative measurements. Is the material specified for the BY041TM spring? Material information is not specified in the provided product data for the BY041TM spring Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Locking Screw - Teknik Makina

Technical Specifications: Order Number: TH822TM Item: Locking Screw usable with Brand: Teknik Makina Structural Details: Weight: 0.1kg Total length: 22mm Thread: M8 Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

M6 Thread Spring, Compatible With Calipers, 0.1kg - Teknik Makina

A compact replacement that fits M6-threaded fittings and keeps workshop equipment operational with minimal downtime; benefit from a lightweight design and clear identification via SKU BY042TM. Order the spring directly through Metav Werkzeuge or consult the team for application advice. Spring BY042TM — M6-thread replacement spring by Teknik Makina Spring for mechanical and workshop assemblies, designed to engage with M6-threaded fittings and serve as a straightforward replacement part. Spring »BY042TM« by Teknik Makina Compatible with M6 thread Lightweight component, approx. 0.1 kg Ideal for workshop assemblies and repairs Precise fit for M6-threaded assemblies reduces rework A coil element engineered for compatibility with M6 thread fittings ensures a reliable mechanical interface and predictable behaviour in assemblies. The component is delivered under the clear identifier BY042TM, which simplifies spare-part management and stock rotation. With a declared mass of 0.1 kg, the part is easy to handle and suitable for rapid replacement cycles, contributing to shorter maintenance windows and fewer interruptions to production processes. This factual clarity supports planning and inventory decisions in maintenance workflows. Quick replacement to keep workshop processes moving As a straightforward replacement item, the spring offers an efficient remedy for worn or fatigued components in fixtures and small mechanisms. The simple design facilitates fast assembly without the need for special tools, allowing technicians to restore function with minimal effort. The combination of compact dimensions and unambiguous labelling stabilises procurement and reduces the time spent searching for compatible spares, helping to maintain throughput and reduce indirect labour costs associated with extended repairs. Robust stock option for general workshop and repair tasks Supplied by Teknik Makina and identified as SKU BY042TM, the component suits general workshop use where standard metric threads are employed. Its role as a standardised spare makes it a practical choice for stocking alongside commonly used fasteners and fittings. Paired with Metav Werkzeuge's distribution and quality filtering, this component becomes part of a dependable supply chain that supports consistent workshop performance and secure replenishment practices. Order replacement parts like this Teknik Makina spring via Metav Werkzeuge for reliable availability and workshop-ready stock — contact Metav Werkzeuge for specification checks or consult our advisers at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BY042TM Manufacturer: Teknik Makina Weight: 0.1 kg Eclass: 21189290 Suitable for: M6 thread Facts Mass: 0.1 kg Thread compatibility: M6 SKU: BY042TM Special features Compatible with M6 thread fittings Identified as BY042TM for stock control Intended for workshop assemblies and repairs FAQ Is this part compatible with standard M6 threads? The spring is specified for use with M6 thread fittings and is supplied as part BY042TM from Teknik Makina. What is the weight of the spring BY042TM? The listed weight for the spring BY042TM is 0.1 kg, suitable for standard replacement handling. Can this spring be used as a general workshop replacement part? Yes, the spring from Teknik Makina (SKU BY042TM) is intended for general workshop assemblies and repair tasks involving M6-threaded fittings. How is the part identified for stock and ordering? The component is identified by SKU BY042TM and the manufacturer name Teknik Makina, which simplifies ordering and inventory management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Schrauben Gewinde: M3,5

Schrauben Gewinde: M3,5

Schrauben Gewinde: M4

Schrauben Gewinde: M5