Precision marking tools for accurate setup and machining
Precision marking tools such as scribing sets and scribers are essential for laying out work in metalworking and woodworking, enabling machinists and fitters to transfer exact lines and points for drilling, milling and cutting. These tools serve to produce fine reference lines on materials like metal, wood and plastic, ensuring correct alignment and repeatable results when combined with a precision caliper or other measuring aids. Using a quality scriber, scribing set and precision caliper improves setup speed, reduces setup errors and supports consistent tolerances across batches.
100 x 70 mm Centre Square Matt Chrome Plated, 0.2 kg - Metav IndustryLine
Benefit from a robust tool steel construction, a matt‑chrome scale and compact 100 × 70 mm geometry for reliable centre marking and quick set‑up in the workshop; order directly via Metav Werkzeuge or consult the technical team for batch or integration advice. Centring Square 100 x 70 mm — Marking‑out square with matt‑chrome finish from Metav IndustryLine A Centring Square 100 x 70 mm designed for precise centre marking and alignment in machine shops and metalworking benches Tool steel, rust‑protected finish Matt‑chrome scale for clear readings Compact 100 × 70 mm geometry Suitable for shaft Ø90 mm alignment Precise centre marking for faster machine set‑up The compact geometry and machined reference faces deliver consistently reproducible results when establishing centres or transfer lines. Manufactured from tool steel with a matt‑chrome finish, the device minimises deformation and wear during repeated use, ensuring stable repeatability over many cycles. The square’s profile and right‑angle accuracy make it a dependable aid for marking out on shafts, flanges and workpieces before drilling, turning or milling. Where setup speed and alignment consistency matter, this marking‑out tool reduces rework and supports efficient production workflows. Durable finish and contrast‑optimised scale to cut error rates A matt‑chrome scale and rust‑protected body reduce glare and enhance legibility under workshop lighting, which lowers the probability of misreading marks. The finish also adds a corrosion‑resistant barrier that preserves the reference faces and graduations, extending service life in demanding environments. Clear markings and stable surfaces translate directly into fewer measurement corrections and a steadier process capability, so inspection and set‑up steps remain both faster and more reliable. Compact format that integrates into everyday workshop routines The small footprint and straightforward geometry suit bench work, toolroom stations and on‑machine set‑up alike. Intended as a practical marking‑out companion, the square fits into standard tool drawers and can be paired with calipers for cross checks; it is noted as suitable for use with a caliper on shaft Ø90 mm. The lightweight, precise design supports quick handlings, such as clamping and re‑positioning, while the familiar form factor aids integration into existing procedures without additional training. The product is listed as M214.170 and follows the Metav IndustryLine quality approach for consistent, workshop‑ready performance. Contact Metav Werkzeuge in Emmerich for technical advice or to discuss integration of the Metav IndustryLine Centring Square M214.170 — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M214.170 GTIN / EAN: 4054469106984 Category: Marking‑out tools (Anreisszeuge) Customs tariff number: 90172039 Facts Dimensions: 100 × 70 mm Material: tool steel Finish: matt‑chrome, rust‑protected Suitable for caliper use on shaft Ø90 mm Special features Machined right‑angle reference faces Matt‑chrome scale for improved contrast Compact marking‑out geometry for bench and machine use Emphasises repeatability and workshop durability FAQ Is the centring square suitable for marking centres on shafts? The Centring Square 100 x 70 mm is intended for centre marking and is suitable for alignment tasks on shafts, noted for compatibility with caliper checks on shaft Ø90 mm. What material and finish are used for the square? This marking‑out square is made from tool steel with a rust‑protected, matt‑chrome finish that improves durability and scale legibility. How does the matt‑chrome scale help in daily use? The matt‑chrome scale reduces reflections and glare, making graduations easier to read under workshop illumination and therefore reducing the chance of marking errors. Can the square be used for both workshop and machine‑shop setups? Yes, the compact geometry and machined reference faces make the square suitable for bench work, toolroom tasks and on‑machine set‑ups where precise centre marking is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Centre Square Aluminium, Black Anodised - Metav IndustryLine
Taking advantage of a hardened aluminium alloy body and a black anodised finish, this centring tool combines low weight and robust resistance for repeatable marking and alignment in everyday workshop tasks; order the centre square directly via Metav Werkzeuge or consult our specialists for application advice. Centre Square AL 100 x 70 mm – Aluminium centring square, black anodised (Metav IndustryLine) The Centre Square AL 100 x 70 mm is a compact aluminium centring square designed for precise marking and alignment of shafts and components in metalworking and workshop layout tasks. Hardened aluminium alloy construction Black anodised finish for low glare Compact 100 x 70 mm format Suitable for centring shafts up to Ø90 mm Durable marking that keeps setups consistent The compact angle plate is manufactured from a hardened aluminium alloy, providing a favourable stiffness‑to‑weight ratio that supports repeatable setups without the fatigue of heavier steel tools. The black anodised finish reduces surface reflections during layout and offers a basic corrosion barrier, which helps maintain visible reference edges over time. At approximately 0.2 kg, the tool is easy to handle and manoeuvre on benches and fixtures, which shortens positioning time and reduces the risk of slip during scribing or centring operations. These features result in fewer setup errors and a more efficient marking workflow. Compact dimensions that speed up routine work With an overall footprint of 100 x 70 mm, the design balances reach and accessibility for common workshop components. The short face is suitable for tight fixtures while the longer face offers stable bearing during alignment; this format is particularly practical when working on mid‑sized shafts and assemblies. The tool is specified as suitable for centring on shafts up to Ø90 mm, making it a reliable reference for turning preparations, punch layout and quick dimensional checks. Its compactness supports rapid clamping or holding and makes the tool convenient to keep at the bench for frequent use. Built for the workshop — simple care and wide applicability The centring square is made for routine layout and alignment tasks across machining and fabrication shops. The dark anodised surface simplifies visual contrast with scribe lines, while the aluminium construction reduces the risk of marking delicate surfaces. Cleaning requires only a light wipe with a lint‑free cloth and a mild solvent if necessary; avoid abrasive cleaners to preserve the anodised layer. As part of the Metav IndustryLine range, this tool benefits from the supplier’s quality filter in Emmerich, which supports consistent product standards for professional users and trade buyers. For reliable centring and faster layout workflows, contact Metav Werkzeuge in Emmerich for technical advice or to request the Metav IndustryLine Centre Square AL 100 x 70 mm (SKU M214.170.AL) and guidance on suitable applications. Technical data Article number: M214.170.AL GTIN: 4054469164472 Tariff number: 90172039 Weight: 0.2 kg Measurements Size: 100 x 70 mm Suitable for shaft centring: Ø90 mm Net weight: 0.2 kg Features Material: hardened aluminium alloy Surface: black anodised finish Category: marking and layout tool Use case: centring, scribing and alignment FAQ What is this tool best used for? The centre square is intended for marking, centring and alignment tasks in metalworking and fabrication; the Metav IndustryLine Centre Square AL 100 x 70 mm (SKU M214.170.AL) is suited to layout work and preparatory alignment of shafts and housings. Can this square be used on round shafts? Yes — the tool is specified as suitable for centring shafts up to Ø90 mm and provides stable reference faces for scribing and setup. How should the finish be maintained? Wipe the black anodised surface with a lint‑free cloth and a mild solvent if needed; avoid abrasive pads to preserve the anodised layer and the clarity of scribe lines. Is the material suitable for everyday workshop handling? The hardened aluminium alloy offers a good compromise between stiffness and low weight for routine use, and the Metav IndustryLine quality control ensures consistent production standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Pin Punch CV Steel, 10mm Diameter, 3mm Tip - Metav IndustryLine
Combining chromium‑vanadium steel construction with compact 120 × 10 × 3 mm dimensions, these marking punches provide reliable, repeatable scribing with a long service life. Benefit from a robust tool that supports efficient workshop marking; order the M214.030 marking punches directly via Metav Werkzeuge or consult our advisors for production quantities and delivery details. Marking punches M214.030 — 120 × 10 × 3 mm, chromium‑vanadium steel (Metav IndustryLine) The Marking punches M214.030 are hardened punch blanks designed for precise scribing and centre‑marking in metalworking and fabrication environments. Chromium‑vanadium steel construction Precise 120 × 10 × 3 mm dimensions Designed for durable workshop marking Consistent marks and extended lifetime for production use The M214.030 marking punches are manufactured from chromium‑vanadium steel, a material known for its balance of toughness and wear resistance. This composition reduces the risk of chipping under repeated impact and maintains a predictable edge for longer, which translates into fewer reworks and steady process output. The combination of material and compact cross‑section keeps marking precision stable throughout repetitive use, making these blanks suited to routine layout tasks in a production setting. Compact dimensions that aid handling and repeatability With clear 120 × 10 × 3 mm measurements, the punches are dimensioned for comfortable handling while offering sufficient contact area for reliable strikes. The slim profile helps to localise force on the scribe point so marks remain crisp without excessive deformation of the tool. This geometry supports quick alignment in jigs and fixtures and contributes to efficient workshop workflows by reducing setup time and improving repeatability of layout marks. Practical applications and workshop compatibility These punch blanks serve as a straightforward solution for scribing, centre‑marking and pre‑drilling indications across general metalworking and fabrication tasks. Supplied as a simple, no‑nonsense tool blank, they integrate easily into standard marking tool assortments and can be finished or ground to match specific tip geometries if required. The robust build supports daily use on the shop floor and aligns with Metav IndustryLine’s aim to make precision tools accessible and dependable for industry customers. Contact Metav Werkzeuge for quantity options, delivery lead times and advice on integrating the M214.030 marking punches into existing tool assortments; Metav Werkzeuge ships from Emmerich with expert guidance and reliable supply Technical data Article number: M214.030 GTIN: 4054469163949 Customs tariff number: 90172039 Weight: 0.1 kg Dimensions & material Length: 120 mm Cross‑section: 10 × 3 mm Material: Chromium‑vanadium steel Applications & features Category: marking tools Intended use: scribing and centre‑marking Robust CrV construction for repeated impact FAQ What are the exact dimensions of the punches? The M214.030 marking punches measure 120 × 10 × 3 mm, as stated in the technical data for the Metav IndustryLine marking punches. Which material is used for these marking punches? These marking punches are made from chromium‑vanadium steel, selected for its toughness and wear resistance in regular workshop marking tasks. Can the blanks be ground to a specific tip geometry? Yes, the M214.030 punch blanks can be ground to a desired tip profile to suit particular marking requirements while preserving core material properties. Are these punches suitable for repeated use on a production line? The chromium‑vanadium construction and compact geometry of the M214.030 make them well suited to repetitive marking operations typical in production and fabrication environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Punch Hammer With CV Steel Head And Rubber Handle - Metav IndustryLine
Take advantage of a compact, robust marking tool that combines a chrome‑vanadium steel tip with an ergonomic rubber handle for precise scribing and repeatable centre marks; the 120 mm length ensures reach without loss of control. Order directly via Metav Werkzeuge or consult the Metav advisors for application guidance. Marking punch M214.030.H – 120 × 10 × 3 mm marking punch with chrome‑vanadium tip and rubber handle (Metav IndustryLine) Marking punch M214.030.H is a compact workshop marking tool for accurate scribing, centre punching and layout work in metal and general workshop use. Chrome‑vanadium steel tip for wear resistance Ergonomic rubber handle for secure grip Compact 120 mm length for tight spaces Precise 10 × 3 mm section for defined marks Accurate layout and repeatable marks for production work The 120 mm overall length and the slender 10 × 3 mm section make this marking punch ideal where access is limited but precise layout is required. The hardened chrome‑vanadium tip delivers a defined point that holds its edge under repeated impact, supporting consistent scribing and centre marking on ferrous and non‑ferrous materials. In practical terms, this means fewer re‑marks and quicker set‑ups on the shop floor, improving throughput when laying out multiple identical parts. Ergonomics that reduce operator fatigue and increase control An ergonomic rubber handle provides a secure grip and dampens impact vibration, which helps maintain a steady hand during repetitive layout tasks. The modest mass of the tool (approx. 0.10 kg) keeps it manoeuvrable for detailed work while still offering enough inertia for reliable impact transfer. For technicians and fitters who perform frequent marking, the combination of tactile grip and balanced weight reduces slips and improves mark placement, so fewer corrective operations are necessary. Durable construction for everyday workshop environments Constructed with a hardened chrome‑vanadium steel striking end and a resilient grip, the tool resists deformation and wear typical in busy workshops. The robust metal tip tolerates standard hand‑hammer strikes and preserves a sharp marking point over long service intervals, reducing maintenance downtime. This durability translates into dependable performance across routine metalworking tasks, from layout to light centre‑punching, making the tool a practical addition to a machinist’s or maintenance kit. Practical handling, storage and application notes The compact dimensions make the punch easy to store in a tool drawer or pouch and quick to retrieve for ad‑hoc measurements and layout work. Its geometry suits marking on sheet edges, bolt circles and small components where larger punches would be cumbersome. For best results, use a firm, centred strike; the durable tip will maintain accuracy, and the rubber handle supports repeatable hand positioning for series work. The marking punch is categorised for general workshop marking tasks and integrates well with standard layout procedures. For reliable workshop marking and a durable shop tool, contact Metav Werkzeuge to discuss the Metav IndustryLine marking punch M214.030.H and request application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M214.030.H ECLASS: 21022304 Manufacturer: Metav IndustryLine Overall length: 120 mm Cross-section: 10 × 3 mm Weight: 0.10 kg Material: Chrome‑vanadium steel tip; rubber handle Category: Marking tools (Anreisszeuge) Intended use: Scribing, centre marking, layout FAQ What materials can be marked with this punch? The marking punch M214.030.H is designed for workshop marking on a variety of materials; the chrome‑vanadium tip is suitable for common steels and non‑ferrous metals used in layout tasks. Is the handle comfortable for repeated use? Yes, the rubber handle provides an ergonomic grip that dampens impact and improves control during repetitive marking operations. How compact is the tool for tight spaces? With an overall length of 120 mm and a slim 10 × 3 mm section, the tool is compact enough for confined areas while retaining stable handling. Does the tip resist wear under regular use? The hardened chrome‑vanadium tip is manufactured for durability and maintains a defined marking point through regular workshop striking. Which Metav series covers this product? This item is part of the Metav IndustryLine range and is supplied under article number M214.030.H. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Scriber With Carbide Tip, Robust Handle - Metav IndustryLine
Combining a solid carbide tip with a robust hand grip and a compact 150 mm profile delivers precise, long-lasting scribing for routine workshop layout tasks; order directly via Metav Werkzeuge or consult the technical team for application advice. Heavy-Duty Scriber with Solid Carbide Tip (M214.036) — Metav IndustryLine The Heavy-Duty Scriber with Solid Carbide Tip (M214.036) is a workshop marking tool designed for repeatable layout and scribing work across general fabrication and maintenance tasks. Solid carbide tip for long wear 150 mm length for workshop marking Robust ergonomic handle for forceful use Lightweight: 0.1 kg for easy handling Durable marking for demanding workshop tasks Designed for consistent layout lines in busy workshop environments, the scriber combines a solid carbide tip with a compact geometry to maintain marking accuracy over time. The carbide point is wear-resistant and preserves its geometry under repeated use, reducing the need for frequent tip changes and supporting uninterrupted production runs. This endurance translates into fewer interruptions and more predictable results when transferring centre lines, reference marks or scribe lines for subsequent machining or assembly. Ergonomic grip for controlled, forceful marking An engineered robust handle transmits force efficiently to the tip, enabling deliberate marking where visibility and line depth matter. The 150 mm overall length strikes a balance between reach and control, offering comfortable handling for one-handed operation without sacrificing manoeuvrability. The tool’s light construction reduces operator fatigue during repetitive tasks while still allowing confident pressure transfer for clear, visible scribe lines. Reliable workshop partner that supports uptime The straightforward design requires minimal upkeep: occasional cleaning and inspection keep the tool serviceable for long periods. As part of the Metav IndustryLine, this scriber benefits from the brand’s quality filtering and reliable logistics, contributing to steady workshop supply and dependable availability. The combination of durability and simple maintenance helps to lower operating costs and streamline daily marking routines. Choose the Metav IndustryLine scriber with a solid carbide tip for dependable workshop marking and contact Metav Werkzeuge for ordering and technical advice Technical Data Article number: M214.036 GTIN: 4054469106342 Manufacturer: Metav IndustryLine Tariff code: 90172039 Specifications Length: 150 mm Weight: 0.1 kg Features Solid carbide tip Robust hand grip Category: Marking tools / scribing Lightweight construction FAQ What material is the tip made from? The Heavy-Duty Scriber (M214.036) is fitted with a solid carbide tip, chosen for its abrasion resistance and long service life. What is the overall length of the tool? The tool has an overall length of 150 mm, providing a good compromise between reach and control for workshop marking tasks. Is the scriber suited for repetitive layout work? Yes — the durable carbide tip and robust handle of the Metav IndustryLine scriber support repeated marking operations while reducing the need for frequent replacements. How is the product identified for ordering? Reference the article number M214.036 or the GTIN 4054469106342 when enquiring about the scriber Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Scriber With Cemented Carbide Tip Short Point - Metav IndustryLine
Take advantage of a carbide-tipped scribing tool that combines enduring point life and precise control in a compact form; the short, sharply ground tip and 150 mm overall length enable exact layout lines while remaining easy to handle. Order the tool directly via Metav Werkzeuge or consult the product specialists for application advice. Carbide-tipped Scriber M214.033.K — precision marking tool, short point The Carbide-tipped Scriber M214.033.K is a compact marking instrument designed for fine layout and scribing tasks in workshops and production environments, offering a short point for detailed work and a sturdy carbide tip for long-lasting sharpness. Carbide tip for lasting sharpness 150 mm overall length for controlled handling Short point for fine, precise marking Lightweight 40 g for easy manoeuvring Precision marking with a durable carbide tip The compact layout pin is built around a carbide tip that retains a sharp edge far longer than common steel points, making it suitable for repetitive marking cycles where consistent line clarity matters. The short, finely ground point produces clear, narrow scribe lines for layout control; this improves subsequent machining or joining accuracy by helping to define exact edges and reference lines. The tool’s lightweight nature at approximately 40 g reduces hand fatigue during repeated use and supports steady handling in confined workspaces. Handling and design that support accurate work With an overall length of 150 mm, the instrument balances reach and control: the size is long enough to reach across small assemblies yet compact enough for precise finger-guided work. The short-point geometry minimises lateral play and concentrates force at the contact point, which helps produce consistent markings with minimal tip deflection. The robust construction around the carbide tip offers dependable performance in day-to-day layout routines, supporting swift, repeatable marking without frequent resharpening. Practical workshop use and maintenance The tool is intended as a straightforward layout aid for marking and scribing operations; regular cleaning of the tip and protection from corrosive environments will preserve performance and service life. The carbide tip requires little maintenance compared with softer materials, but careful storage prevents accidental point damage. The compact format and durable tip make the instrument a practical addition to toolkits where reliable, repeatable markings are a prerequisite for downstream machining or assembly tasks. For dependable, long-lasting layout performance select the Metav IndustryLine carbide-tipped scriber M214.033.K and contact Metav Werkzeuge in Emmerich for availability and advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.033.K GTIN: 4054469106274 Customs tariff number: 90172039 Weight: 0.04 kg Overall length: 150 mm Facts Tip material: carbide Label: Carbide-tipped scribing needle, short point Category: Marking tools (Anreisszeuge) Special features Short, finely ground point Durable carbide tip for extended service life Compact format for precise layout work FAQ What is the tip material of the Carbide-tipped Scriber M214.033.K? The tip is made of carbide, providing long-lasting edge retention for consistent scribing performance. What is the overall length and weight of the tool? The scribing tool measures 150 mm overall and weighs about 40 g, offering a compact balance between reach and control. For which tasks is this marking tool intended? The instrument is intended for fine layout and scribing tasks in workshops and production settings, producing narrow, precise lines for machining and assembly preparation. How should the M214.033.K be maintained? Keep the carbide tip clean and dry, store the tool to avoid accidental tip damage, and handle it carefully to preserve the finely ground point. Is the M214.033.K suitable for repetitive, high-volume marking? Yes; the carbide tip’s durability supports repetitive marking cycles with reduced need for frequent maintenance, making it appropriate for routine workshop layout work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Carbide Scriber Pencil With Replaceable Carbide Tip, Clip - Metav IndustryLine
Take advantage of the combination of robust replaceable carbide tip, compact mechanical‑pencil form and light weight for precise, low‑maintenance workshop marking; order directly via Metav Werkzeuge or consult the team for application advice. Carbide scribing needle in mechanical‑pencil form, 150 mm with replaceable carbide tip (M214.035.N) The Carbide scribing needle in mechanical‑pencil form, 150 mm with replaceable carbide tip is a compact marking tool designed for precise layout and scribing in metalworking and general workshop use. Replaceable carbide tip for long service life Mechanical‑pencil form for controlled marking 150 mm overall length for precise reach Lightweight: 20 g for comfortable handling Precise, durable marks from a replaceable carbide tip The core advantage of this marking tool is its replaceable carbide tip, which ensures consistently sharp, durable marks on hard materials while keeping life‑cycle costs low. The hard‑metal tip holds an edge far longer than softer leads, so fewer tip changes are required and marking quality remains reproducible for layout, centre‑punch substitution and scribe lines. This reliability supports leaner workflows and reduces downtime associated with frequent tool changes. Compact form for confident control and repeatability Thanks to the mechanical‑pencil style body and a total length of 150 mm, the instrument offers controlled one‑hand operation and improved tactile feedback compared with larger scribers. The compact design concentrates mass near the tip for stable contact and accurate line placement, making it well suited to detail work on fixtures, small assemblies and component edges. The lightweight construction reduces operator fatigue during repetitive marking tasks while preserving steady handling. Serviceable design that supports workshop sustainability A replaceable tip concept maximises usable product life and simplifies maintenance: worn or damaged carbide points can be changed without replacing the whole tool, which reduces consumable waste and procurement overhead. The simple geometry of the tip also means easy reconditioning and fast availability of spares. For workshops that value dependable marking performance and predictable tool upkeep, this scribing instrument delivers both cost efficiency and operational continuity. For dependable, serviceable marking tools from Metav IndustryLine, contact Metav Werkzeuge to discuss suitability for specific applications and to arrange supply of the M214.035.N carbide scribing needle. Technical Data Article number: M214.035.N GTIN: 4054469106335 ECLASS: 21049238 Customs tariff number: 90172039 Facts Length: 150 mm Weight: 0.02 kg Special features Replaceable carbide tip Mechanical‑pencil form Category: marking tools (Anreisszeuge) Label: Carbide scribing needle in mechanical‑pencil form, 150 mm with replaceable carbide tip FAQ What material is the tip made from? The tip is made of carbide (hard metal); the M214.035.N is supplied with a replaceable carbide tip for durable marking. Can the tip be replaced on site? Yes, the tip of the M214.035.N is designed to be replaceable so the body is retained while worn tips are renewed. Is this scribing needle suitable for fine workshop layout work? The compact, mechanical‑pencil form and 150 mm length make the tool well suited to fine layout and detailed marking tasks in a workshop environment. How heavy is the scribing needle in use? The instrument weighs 0.02 kg (20 g), offering comfortable handling for repetitive marking operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Scriber Caliper T-Form With 100mm Stop, 0.01mm Resolution, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of a compact, workshop‑ready measuring instrument that combines a T‑form scribing jaw, a digital display with On/Off, Zero, Unit and Hold keys and a hardened stainless‑steel construction for repeatable marking and dimensional checks. Order the instrument directly via Metav Werkzeuge or ask the consultants for application guidance. Digital Scribing Caliper T‑Form 150 mm (Metav IndustryLine) — digital display, T‑form scribing jaw The Digital Scribing Caliper T‑Form 150 mm is a compact, workshop caliper designed for precise scribing, step and outside measurements in general engineering and toolroom environments T‑form scribing jaw with 100 mm stop Digital display with On/Off, Zero, Unit, Hold Hardened stainless steel with bevelled scribing edge Fine‑adjustment thumb wheel for repeatable settings Precise everyday measuring for machine shops and toolrooms This caliper is classified in the standard range (measuring range up to 300 mm) and covers the most common workshop needs with a 150 mm reach. The resolution of 0.01 mm on the digital display delivers the typical clarity required for production checks and incoming‑goods inspection; this discrete increment supports fast decision‑making on the shopfloor and reduces rework by making tolerance checks straightforward. The electronic readout provides unambiguous numerical values, which speeds up quality control and shortens the measuring cycle compared with analogue alternatives. Robust construction that supports accurate scribing and marking The main beam and jaws are made from hardened stainless steel, with a bevelled scribing edge specifically shaped for marking. The T‑form scribing jaw permits reliable scribing alongside dimensional measurement, while the metal housing protects the electronics in daily use. The caliper’s mechanical design, combined with a fine‑adjustment thumb wheel, enables controlled contact and repeatable positioning when transferring dimensions or setting up fixtures, which improves process stability and reduces measurement uncertainty. User‑friendly electronics and data transfer for traceable measurements The instrument features a digital module with On/Off, Zero, Unit and Hold controls for rapid operation and flexible unit selection. A 3 V power supply runs the electronics for typical workshop duty cycles. The integrated RB 5 data output allows connection to compatible readout systems or data loggers, supporting documentation of measured values and integration into basic digital workflows. This makes the caliper suitable for situations where measurement records must be captured or forwarded for quality documentation. Practical benefits for production, assembly and maintenance Designed for everyday use in metalworking and maintenance, the caliper combines the convenience of electronic display with the functionality of a scribing tool. The 100 mm stop is useful when repeated reference from a fixed datum is required, while the caliper’s size and handling characteristics make it a versatile companion at the bench or on the machine. Backed by Metav’s emphasis on accessible precision and a broad distribution network in Emmerich, this measuring tool helps secure a dependable supply chain and supports efficient workshop practices. Discuss application details with Metav Werkzeuge in Emmerich to ensure the Digital Scribing Caliper T‑Form 150 mm meets specific workshop requirements and to secure procurement or integration advice Technical data SKU: M240.155 GTIN: 4054469178189 Customs tariff number: 90173000 Core technical data Measuring range: 0–150 mm Resolution: 0.01 mm Inch resolution (display): 0.0005 in Power supply: 3 V Stop length: 100 mm Materials & special features Hardened stainless steel beam and jaws Bevelled scribing edge for marking Metal housing for electronics T‑form scribing jaw design Digital display with On/Off, Zero, Unit and Hold RB 5 data output for external logging Fine‑adjustment thumb wheel for repeatable settings FAQ How accurate is the Digital Scribing Caliper T‑Form 150 mm? The caliper offers a digital resolution of 0.01 mm, suitable for standard industrial control tasks; this supports reliable tolerance checks in everyday machine‑shop work. Can the instrument mark components as well as measure them? Yes, the bevelled scribing edge and T‑form jaw permit controlled scribing alongside dimensional measurement, so marking and checking can be performed with a single tool. Does the caliper provide a data connection for traceability? The model includes an RB 5 data output, enabling transfer of measured values to compatible readouts or data‑logging equipment for traceable records. Is a calibration certificate included with this caliper? No ISO 17025 calibration certificate is specified for this model; the caliper is supplied in its standard factory condition without an explicit ISO 17025 certificate. What power source does the electronic module use? The display and electronics operate from a 3 V supply as specified for the device. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Scriber With Replaceable Reversible Carbide Tip And Clip, Hardened Tip - Metav IndustryLine
Take advantage of a robust carbide tip and an integrated centre punch to achieve repeatable, workshop‑grade markings with minimal effort; the compact 150 mm length ensures precise control and low operator fatigue. Order the tool directly via Metav Werkzeuge or consult our technical advisors for application guidance. Scribing awl M214.039 – Carbide tip, centre punch Scribing awl M214.039 for clear marking and spot‑punching in general workshop and metalworking tasks, built to offer durable contact points and comfortable handling. Carbide tip for durable marking Integrated centre punch for spot marks 150 mm length for comfortable handling Precise marking that withstands workshop use The compact marking implement combines a carbide tip with a slim profile to deliver consistent precision marking on a range of workshop components. The hardmetal point resists wear, so line clarity and repeatability remain stable across many operations; this reduces rework and supports quality control routines. At just 150 mm, the tool balances reach and rigidity, allowing controlled contact pressure and accurate line placement even in confined setups. The overall effect is fewer measurement corrections and a smoother production flow. Comfortable handling for repetitive tasks Ergonomics and low weight are decisive when marks must be repeated across many parts. The tool’s lightweight construction and compact length reduce wrist strain and improve positional control, which speeds up marking cycles without sacrificing accuracy. The built‑in centre punch function enables immediate spot‑punching where pilot points are needed, eliminating the need for a separate punch operation and saving production time. These practical advantages make the instrument well suited to daily use on assembly benches and in jobbing workshops. Built for reliability and straightforward upkeep A simple, robust design keeps maintenance demands low: the hardmetal tip maintains its geometry longer than softer points, extending service intervals and lowering lifecycle costs. The solid construction and clear function focus result in a tool that is easy to stow and ready when needed, supporting a dependable workshop routine. For procurement, selecting this marking implement helps ensure consistent markings across shifts and operators, contributing to reproducible outcomes on the shop floor. Choose the Metav IndustryLine scribing awl for durable, workshop‑ready marking — contact Metav Werkzeuge in Emmerich for technical advice and reliable supply Technical data Article number: M214.039 GTIN: 4054469106410 Customs tariff number: 90178090 ECLASS: 21049238 Dimensions & weight Length: 150 mm Weight: 0.052 kg Materials & features Carbide tip Integrated centre punch Category: Marking tools FAQ What is this tool best used for? The Scribing awl M214.039 is intended for precise marking and spot‑punching tasks in workshop and metalworking environments. How durable is the marking point? The hardmetal (carbide tip) on the M214.039 offers prolonged wear resistance for consistent marking over many uses. Is the size suitable for confined spaces? Yes, the 150 mm length provides a good balance of reach and control, making the instrument suitable for tighter work areas and repetitive marking. Can this tool replace a separate punch in many operations? The integrated centre punch function on the M214.039 allows immediate spot‑punching, reducing the need for an extra tool in many workflows. Which product code should be referenced when ordering? Reference SKU M214.039 (Scribing awl) when enquiring or ordering to ensure the correct marking tool is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x130 mm Centre Square Matt Chrome Plated, 0.3 kg - Metav IndustryLine
Take advantage of a precision reference edge, tool‑steel construction and a matt chrome finish for glare‑reduced readings and enduring workshop use; procure the centring square directly via Metav Werkzeuge or consult the Metav team for application advice. Centring square M214.171 – 150 x 130 mm, matt chrome‑plated (Metav IndustryLine) The centring square M214.171 is a compact right‑angle layout tool for accurate alignment and marking tasks in metalworking and general workshop layout. Matt chrome finish for low glare Robust tool‑steel construction Compact 150 x 130 mm format Accurate alignment for layout and set‑up The right‑angle reference plate offers a reliable datum for marking and checking parts during set‑up and layout work. Built from tool steel with a matt chrome finish, the device reduces reflections when reading scribed lines and maintains a true edge under regular workshop use. The compact format provides a balanced combination of stiffness and accessibility for confined machining or assembly stations, making it a practical choice for repetitive alignment tasks. Designed for repeatable positioning and workshop workflow With its defined leg lengths, the square serves as a reproducible reference for transferring centres and checking perpendicularity on components and assemblies. The matt chrome surface improves visual contrast when comparing scribed marks, while the rust‑protected treatment preserves the reference geometry. As a straightforward layout instrument, it supports efficient process flows in both small‑batch and series environments by reducing rework caused by misalignment. Durable build and broad application range Manufactured to withstand everyday use, the square's tool‑steel body offers long service life and dependable performance in marking, centring and inspection tasks. It is suitable for use with shafts and cylindrical components where a precise right angle is required; the item is compatible with shafts up to Ø190 mm for centring operations. The construction focuses on robustness and a consistent reference surface rather than decorative detail, ensuring the tool remains a practical asset across workshops and maintenance departments. Contact Metav Werkzeuge for tailored technical advice, application recommendations or to request a procurement quote for the Metav IndustryLine centring square M214.171 Technical data Article number: M214.171 GTIN: 4054469106991 TARIC code: 90172039 ECLASS: 21170131 Facts Dimensions: 150 x 130 mm Compatible shaft diameter: Ø190 mm Materials & features Tool steel Rust‑protected Matt chrome‑plated finish Category: Anreisszeuge (layout tools) FAQ What materials is the centring square made from? The centring square M214.171 is made from tool steel with a rust‑protected, matt chrome finish. Which dimensions does the instrument offer? The device is supplied in a compact 150 x 130 mm format suitable for general layout and workshop use. Can the square be used with shafts and cylindrical parts? Yes, the M214.171 is suitable for centring and alignment tasks with shafts up to Ø190 mm. How does the matt chrome finish benefit workshop use? The matt chrome finish reduces glare and improves contrast when reading scribed marks, aiding repeatable visual comparison during marking and inspection. Is this item part of the Metav IndustryLine range? Yes, the M214.171 is offered under the Metav IndustryLine series and can be sourced directly from Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150×130 mm Centre Square Aluminium Alloy, Black Anodised, For Ø190 mm Shafts - Metav IndustryLine
Take advantage of a lightweight, hardened aluminium design paired with a black anodised finish to secure repeatable centre marking on shafts and cylindrical components; the compact 150 x 130 mm geometry supports efficient workshop workflows. Order the centre square directly via Metav Werkzeuge or consult the Metav team for application advice. Zentrierwinkel AL 150 x 130 mm — centre square, hardened aluminium, black anodised (Metav IndustryLine) The Zentrierwinkel AL 150 x 130 mm is a compact centre square designed for precise marking and alignment tasks in general workshop and metalworking applications, optimised for shafts and cylindrical workpieces. Hardened aluminium alloy construction Black anodised corrosion-resistant finish Compact 150 x 130 mm centring geometry Lightweight 0.2 kg for easy handling Accuracy and repeatability for routine centring tasks The compact centring tool delivers a stable reference for fast, repeatable centre marking on cylindrical parts. Machined from a hardened aluminium alloy and finished with black anodising, the device combines corrosion resistance with low thermal mass to reduce dimensional drift during handling. The 150 x 130 mm geometry places the tool squarely in the standard measurement range, which balances reach and rigidity for everyday tasks in machine shops and maintenance departments. As a result, marking and setup times are shortened, boosting workshop productivity while maintaining the quality of alignment operations. Designed for shaft work and easy handling With a low weight of 0.2 kg and a compact footprint, this centre square is tailored for fast positioning on rotated or stationary shafts up to Ø190 mm, providing a reliable datum for scribing or punch marking. The lightweight construction eases one-handed handling and repeated repositioning, while the hardened alloy resists wear at contact edges. The combination of ergonomics and durable material reduces operator fatigue and keeps throughput steady during repetitive tasks, making it a practical choice for engineers and fitters who require both speed and dependable performance. Practical benefits for the workshop and quality control The robust surface treatment and solid manufacture support frequent use in workshop environments where resilience to knocks and light contamination is needed. As a marking aid, the tool simplifies transfer of centrelines and alignment references from chucks or fixtures to components, improving the interface between setup and machining. The compact design also stores conveniently in tool trolleys or instrument drawers, helping to keep jobsite organisation tight and saving time during changeovers. For reliable centre marking with the Metav IndustryLine centring square, contact Metav Werkzeuge for technical guidance and ordering support — Metav’s specialists in Emmerich can advise on suitability for specific shaft diameters and workshop workflows. Technical Data SKU: M214.171.AL GTIN: 4054469164489 Customs tariff number: 90172039 Category: Anreisszeuge (marking/centre tools) Facts Measurement range: 150 x 130 mm Weight: 0.2 kg Suitable for shafts up to Ø190 mm Material: aluminium alloy, hardened Special features Surface: black anodised Compact centre square geometry for marking and alignment Lightweight design for easy handling and storage Intended for workshop marking and setup tasks FAQ What is the effective measurement range of this centre square? The centre square offers a 150 x 130 mm geometry, categorised in the standard measurement range suitable for general machine‑shop and metalworking tasks. Which materials is the tool made from? This centring tool is made from a hardened aluminium alloy with a black anodised finish, combining lightness with surface protection. Can the device be used on shafts with a diameter of 190 mm? Yes, the design is suitable for use with shafts up to Ø190 mm and provides a stable reference for centre marking on such cylindrical parts. How does the black anodised surface help in workshop use? The black anodising increases corrosion resistance and reduces glare, helping to preserve the visible edges used for marking while improving long‑term durability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160 mm Scriber With Solid Carbide Tip, Hardened Point - Metav IndustryLine
Take advantage of the combination of durable carbide tip and compact 160 mm format for reliable, repeatable marking in workshop routines; the robust construction and low weight ensure steady handling and minimal fatigue. Order the tool directly via Metav Werkzeuge or ask the consultants for detailed specifications if required. M214.033 scriber with carbide tip – 160 mm marking tool (Metav IndustryLine) The M214.033 scriber is a compact, carbide‑tipped marking needle designed for precise layout and scribing tasks in workshop environments, offering a consistent line quality across routine marking operations. Carbide tip for durable, sharp marking Compact 160 mm overall length Lightweight 40 g for comfortable handling Robust construction for workshop use Accurate lines through a carbide tip for consistent layout The supplied carbide tip provides a fine, wear‑resistant point that keeps a consistent edge over prolonged use, enabling precision marking where repeatability matters. In practical terms, the 160 mm overall length balances reach with control: the short form factor helps to reduce flex and improve stability when scribing small to medium workpieces. For production workflows this means less rework and clearer reference lines for machining or assembly operations, supporting faster, more reliable preparation of parts. Built for comfortable, fatigue‑free handling during repetitive use At just 0.04 kg (40 g), the instrument is lightweight, making extended marking sessions noticeably less tiring and contributing to steadier hands and finer results. The straightforward, robust construction minimises moving parts and maintenance needs, which is an advantage in busy shops where simple, dependable tools keep processes running. The durable tip material reduces downtime for sharpening or replacement, which translates into a small but tangible efficiency gain across many marking cycles. Practical choice for general workshop marking and layout As a classic marking tool, the needle is suited to routine layout, centre punching guidance and transfer lines on a variety of surfaces where a carbide point is appropriate. The straightforward specification makes it easy to integrate into existing tool kits and layout stations, and the compact format suits both bench use and mobile inspection tasks. For buyers seeking dependable, low‑complexity marking implements, this model offers a direct combination of durability and handling comfort that supports everyday precision. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine M214.033 carbide scriber and for delivery options from Emmerich Technical data SKU: M214.033 GTIN: 4054469106267 Label: Reißnadel, HM, 160 mm mit HM‑Spitze, 160 mm ECLASS: 21049238 Tariff number: 90172039 Dimensions & weight Length: 160 mm Weight: 0.04 kg Materials & features Carbide tip (HM) Category: Marking tools (Anreisszeuge) FAQ What is the exact length and weight of the scriber? The M214.033 scriber has an overall length of 160 mm and a weight of 0.04 kg (40 g), making it compact and easy to handle. What material is used for the tip and what benefit does it provide? The needle is fitted with a carbide (HM) tip, which offers a hard, wear‑resistant point for sustained sharp marking and longer service life. Is the marking tool suited to repetitive workshop use? Yes, the combination of a durable carbide tip and lightweight construction supports repetitive marking tasks with reduced fatigue and consistent line quality. Does the specification state whether the tip is replaceable? The available specification confirms a carbide tip but does not state whether the tip is replaceable; the product is supplied with the carbide point as described. Which category does this tool belong to for workshop classification? This item is listed under marking tools (Anreisszeuge) and is intended for layout and scribing applications in general workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Precision Scratch Caliper T-Form, 100mm Stop, Hardened Chrome-Plated Steel, Delivered in Case - Metav IndustryLine
Benefit from a hardened special‑steel construction and a T‑form layout with a 100 mm stop for repeatable scribing and marking. The mechanical vernier with a fine‑adjustment spindle provides a 0.05 mm readability that supports consistent setup and faster job changeovers. Order the instrument directly via Metav Werkzeuge or consult our advisors for application support. M201.140 Precision Scribing Caliper — 160 mm T‑form with 100 mm stop (Metav IndustryLine) The M201.140 is a T‑form precision scribing caliper designed for layout and marking tasks in metalworking, jig production and toolroom set‑ups. T‑form design for precise scribing Hardened special steel, matt chrome finish Fine‑adjustment spindle for exact positioning Repeatable marking with a T‑form layout for standard workshop tasks The T‑form layout together with a robust bridge measuring 100 mm gives a stable contact point for repeated scribing and marking operations. Built from hardened special steel with a matt chrome finish, the instrument resists wear and retains a clear datum over many cycles. With a measuring range of 0–160 mm, the caliper falls into the Standard class of workshop calipers and thus offers the best compromise between reach, stiffness and one‑hand handling for everyday metalworking and machine‑shop tasks. The combination of a rigid T‑form and a defined stop shortens set‑up time when multiple identical marks are required. Precision control and industrial‑grade readability for setup accuracy A mechanical vernier with a reading of 0.05 mm gives industrial‑standard resolution for layout and control work; it is suited to production environments where quick visual confirmation is needed rather than submicron measurement. The integrated fine‑adjustment spindle enables gentle, controlled movements when positioning the scribing jaw, which reduces error introduced by manual thrust. For operations such as marking datum lines, transferring offsets to a workpiece or pre‑setting tools, this layout and control system increases throughput while maintaining reproducible results. Easy interpretation and practical guidance for non‑specialists The analogue vernier is straightforward to use: the main scale gives the rough value and the vernier index refines it to 0.05 mm increments—sufficient for workshop layout and pre‑machining checks. The fine‑adjustment spindle facilitates single‑turn micro‑movements to align the scribe precisely before marking. For users less familiar with vernier calipers, this instrument combines familiar mechanical feel with clear graduations to reduce training time and to integrate smoothly into existing inspection routines. Robust design reduces downtime and simplifies maintenance Surface treatment and material selection emphasise longevity: the hardened body and matt chrome plating limit corrosion and reduce glare without affecting sliding accuracy. The simple mechanical construction is easy to clean and inspect; wear points can be checked visually and corrected through routine adjustment rather than replacement. Metav’s role as a European quality filter amplifies these benefits: consistent component selection and stock control mean reliably similar tools across the workshop fleet, which helps to standardise measurement practice and reduces calibration complexity. Choose the Metav IndustryLine M201.140 T‑form precision scribing caliper for workshop‑ready accuracy and contact Metav Werkzeuge for application advice or specification support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.140 GTIN: 4054469100708 Customs tariff number: 90173000 Category: Calipers Brand: Metav IndustryLine Facts Measuring range: 0–160 mm Readability: 0.05 mm Bridge/stop: 100 mm Analog: mechanical vernier eClass: 21170344 Special features Material: special steel, hardened, matt chrome‑plated T‑form layout for scribing Fine‑adjustment spindle Mechanical construction for layout and marking tasks FAQ How precise is the M201.140 for typical workshop layout tasks? The M201.140 precision scribing caliper by Metav IndustryLine provides a readability of 0.05 mm, which is the industrial standard for many marking and setup operations and supports reproducible layout work. For which applications is the T‑form design most suitable? The T‑form caliper is ideal for repeatable scribing and marking, fixture set‑up and tool pre‑setting where a stable reference and a defined bridge (100 mm stop) speed up repeated operations in the machine shop. Does the M201.140 include fine‑adjustment for delicate positioning? Yes—this caliper features a fine‑adjustment spindle that enables controlled micro‑movements for precise alignment of the scribing jaw before marking. What materials and surface treatment are used in this instrument? The instrument is manufactured from hardened special steel and finished with a matt chrome plating to improve wear resistance and reduce reflection during use. Is the 160 mm range suitable for general mechanical workshops? A 0–160 mm measuring range places this instrument in the Standard class, offering a practical balance of reach and stiffness for everyday metalworking and toolroom measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175mm Scriber Steel Pointed Tip, Single Point - Metav IndustryLine
Take advantage of the combination of precise single‑point marking, robust metal construction, and an ergonomic 175 mm length for repeatable layout work in the workshop; order the tool directly via Metav Werkzeuge or consult our product advisers for application guidance. Scribing Needle M214.031 — 175 mm single‑point marking needle | Metav IndustryLine The Scribing Needle M214.031 is a hand marking tool designed for precise layout and scribing tasks in workshop and production environments, offering a long, easy‑to‑handle shaft for controlled lines and points Single‑point hardened tip 175 mm overall length Robust metal construction Lightweight 20 g Precise layout marks with minimal effort A long, rigid shaft and a single‑point tip deliver consistently sharp lines for layout work. The shaft length of 175 mm gives a comfortable reach without compromising control, so marks remain repeatable even on awkward or recessed surfaces. The simple geometry of the point converts a modest hand force into a fine, accurate score, which is particularly valuable when transferring centre lines or reference points prior to machining or assembly. The combination of length and balance reduces wobble and enables controlled marking along edges and across flat faces. Built for everyday workshop reliability Constructed from robust metal, the tool withstands the knocks of daily use while remaining straightforward to maintain. The durable material and hardened tip keep the point geometry intact for longer, reducing the need for frequent dressing or replacement. The design focuses on functional longevity rather than added complexity: a single‑purpose marking instrument that performs reliably as part of a small tool set or larger layout station. The lightweight nature (approx. 20 g) means the needle sits comfortably in a pocket or tool roll without adding bulk. Ergonomic handling for faster workflow The slender profile and balanced shaft promote precise hand positioning and controlled scribing strokes, speeding up repetitive layout tasks. Because the tool is easy to grip and manoeuvre, marking operations become less fatiguing over a production shift, which supports higher throughput without compromising accuracy. The straightforward form factor also simplifies storage and issue control in busy workshops, ensuring the needle is available and ready when needed. Choose the Metav IndustryLine Scribing Needle for dependable, workshop‑grade marking — contact Metav Werkzeuge in Emmerich for purchasing details or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.031 GTIN: 4054469106229 Tariff number: 90172039 EClass: 21049238 Facts Length: 175 mm Weight: 0.02 kg Special features Material: Metal Tip: Single point Category: Marking and layout tools (Anreisszeuge) FAQ What materials is the needle suitable for marking? The scribing needle is made of metal with a hardened single‑point tip and is intended for conventional layout marking on workpieces and surfaces encountered in workshop use How long is the tool and how heavy is it? The tool measures 175 mm in overall length and has a mass of approximately 0.02 kg (20 g); it is designed for easy handling and reach Is the tip replaceable or serviceable? The instrument is a simple, durable marking tool with a hardened tip; routine maintenance consists of keeping the tip clean and, if necessary, reshaping the point with appropriate tooling Which brand and SKU should be quoted when ordering? Please quote Metav IndustryLine Scribing Needle, SKU M214.031, for ordering and identification in procurement Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 mm Replacement Scriber Tip 33 mm Carbide - Metav IndustryLine
Take advantage of the carbide tip and compact 33 mm length to restore precise scribing performance with minimal downtime; the light 1 g replacement combines durability and easy fitment for efficient workshop replenishment — order directly from Metav Werkzeuge or contact our consultants for compatibility guidance. Replacement scribing needle, Ø 2 mm – Carbide tip, 33 mm length (Metav IndustryLine) Replacement scribing needle, Ø 2 mm – Carbide tip, 33 mm length is a precision accessory for scribing calipers, designed to restore crisp marking capability on component surfaces prior to machining. Carbide scribing tip Ø 2 mm 33 mm hardened precision length Suitable for standard scribing calipers Lightweight 1 g replacement part Engineered for consistent, high-contrast marks The replacement scribing needle is built around a carbide tip with a nominal Ø 2 mm diameter and a 33 mm overall length, offering a predictable contact geometry for repeatable scribing. Carbide provides a high hardness-to-toughness ratio, which means the tip keeps a clean edge under regular workshop use and wears significantly slower than simple tool steels. This reliable tip material translates into fewer interruptions for tool changes and a consistent line width that improves downstream machining and inspection readability. Fits routine maintenance cycles and reduces downtime As a direct spare part for scribing calipers, the needle is a fast-change solution that restores measuring and marking capability without the need for tool recalibration in most cases. The component’s negligible mass (approximately 1 g) preserves the balance of the parent instrument and avoids altering handling characteristics during one-handed operation. Supplied as a compact replacement item, it supports straightforward stock management in small to medium workshops and production cells, helping to keep the production flow continuous and predictable. Robustness for workshop environments and broad marking tasks The carbide construction ensures resistance to abrasive wear, making the needle suitable for repeated marking of ferrous and non-ferrous component surfaces encountered in preparatory layout work. While intended for scribing and layout prior to machining, the durable tip tolerates normal workshop contaminants and handling better than softer alternatives. Where longevity matters, the hardened construction reduces the frequency of replacements and supports a cost-conscious maintenance strategy aligned with Metav’s emphasis on accessible precision. For rapid replenishment and assured precision, request the Metav IndustryLine replacement needle M201.155 from Metav Werkzeuge — contact via info@metav-werkzeuge.com or +49 2822 7131930 to confirm fitment and delivery options Technical Data Article number: M201.155 GTIN: 4061905053597 Weight: 0.001 kg (1 g) Material: Carbide Item label: Replacement scribing needle, Ø 2 mm, L 33 mm Facts Diameter: 2 mm Length: 33 mm Mass: 0.001 kg Special features Carbide tip for improved wear resistance Designed as a direct replacement accessory Compact, lightweight design FAQ What is the M201.155 intended for? The M201.155 replacement scribing needle is intended as a spare scribing tip for scribing calipers, restoring precise layout marking capability on component surfaces prior to machining. Which materials can be marked with this carbide needle? Because the needle is made of carbide, the M201.155 is suited to scribing most common workshop component surfaces used for layout work; it is optimised for durable, repeatable marks rather than cutting or heavy abrasion. How long does the replacement needle typically last? Service life depends on use and workpiece abrasiveness; the carbide construction of the M201.155 provides significantly higher wear resistance than softer tips, reducing replacement frequency under normal layout and marking conditions. Is installation of the replacement needle difficult? Installation is designed to be straightforward: remove the worn tip from the scribing caliper and fit the M201.155 in its place, ensuring secure seating. The low mass of the needle preserves handling characteristics of the caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Fräsereinstelllehre, 0,01mm - Metav IndustryLine
Das 1989 gegründete Vertriebsunternehmen von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem überzeugenden Preis. Informationen zur technischen Ausstattung für digitale Fräsereinstelllehre von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Fräsereinstelllehre Bestellnummer: M240.196 Zahlen: Messbereich: 0 bis 200mm Gewicht: 0,4kg Schnabellänge: 80mm Ablesung: 0,01mm Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,05mm Anschlag: 100x10x10mm Besonderheiten Ausführung: digital Lieferung im Kasten Anzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Geeignet für Messschieber: die Einstellung von z.B Sägeblätter, Fräser-Tiefen oder zur Höhenmessung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com
200mm Digital Scriber Caliper T-Form 100mm Stop, 150mm Scribing Rail, 0.01mm Resolution, Stainless Steel Case - Metav IndustryLine
Combine the 200 mm measuring range, a hardened stainless steel scribing edge and a clear digital readout for reliable layout and repeatable marking; order the M240.156 directly via Metav Werkzeuge or consult our advisors for tailored workshop recommendations. Digital marking caliper M240.156 (200 mm, T‑form, 150 mm scribing rail) — Metav IndustryLine A digital marking caliper M240.156 engineered for precise scribing and repetitive layout tasks in metalworking and toolrooms, pairing a 200 mm measuring range with a stable T‑form frame and an integrated 150 mm scribing rail. 200 mm measuring range with T‑form stability Hardened stainless steel body with bevelled scribe Fine adjustment wheel for controlled marking Digital display with zero/unit/hold functions Repeatable layout accuracy for everyday workshop use The caliper is classified in the Standard range (measuring range up to 300 mm), which offers the best balance between reach and rigidity for general machine‑shop and metalworking tasks. With a display resolution of 0.01 mm, the instrument provides clear, workshop‑grade readings that simplify quality control and reduce rework. The built‑in fine adjustment wheel lets operators position the scribe with steady, controlled movement, so marks and reference lines are placed consistently. This focus on measurable, repeatable outcomes makes the tool a practical choice where speed and traceable accuracy matter. Robust materials that withstand daily handling Constructed from hardened stainless steel with a bevelled scribing edge and a metal housing, the caliper resists wear from frequent contact with abrasive shop surfaces and cutting fluids. The T‑form frame increases torsional stiffness, improving measurement stability during layout operations and preventing unwanted twist when working on small fixtures. At around 0.5 kg, the instrument balances solidity and manoeuvrability—heavy enough to feel stable, yet light enough for one‑handed positioning at a bench. These material choices extend service life and reduce the total cost of ownership through fewer replacements. Designed for controlled marking and efficient workflows The integrated 150 mm scribing rail and a dedicated 100 mm stop enable fast, repeatable marking across multiple workpieces without relying on improvised jigs. The clear digital display (with ON/OFF, ZERO, UNIT and HOLD buttons) supports quick zeroing and unit changes on the fly, while the fine adjustment mechanism permits sub‑millimetre alignment before scribing. Together, these features transform a manual layout step into a controlled, semi‑mechanised process that improves throughput and reduces operator variability—an important rational benefit for production environments. Data handling and power supply suited to shop integration Equipped with a data output labelled RB 5, the caliper allows connection to compatible readout or data‑collection systems for logging measurements directly into inspection routines or spreadsheets. The measuring system is powered by 3 V, ensuring long battery life for typical workshop use and straightforward battery replacement when required. These integration options support digital traceability and make the tool a practical component of modern quality workflows without requiring complex setup. Discuss the suitability of the Metav IndustryLine M240.156 for your production needs with Metav Werkzeuge in Emmerich — technical advice and reliable supply are available by email or phone Technical data Article number: M240.156 GTIN: 4054469178196 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Weight: 0.5 kg Scribing rail length (bridge): 150 mm Stop length: 100 mm Power supply: 3 V Data output: RB 5 Special features T‑form frame for increased stiffness Hardened stainless steel with bevelled scribing edge Metal housing Fine adjustment wheel for controlled positioning Digital display with ON/OFF, ZERO, UNIT and HOLD functions Suitable for layout and marking in machine shops and toolrooms FAQ What measuring range does the caliper cover? The digital marking caliper M240.156 covers 0–200 mm, placing it in the Standard class commonly used in machine and metal workshops. Is the scribing edge durable enough for workshop use? Yes, the instrument features a hardened stainless steel body with a bevelled scribing edge designed for repeated contact with workpiece surfaces. Can measurements be recorded electronically from the caliper? The M240.156 includes a data output marked RB 5 for connection to compatible readout systems and data capture workflows. How is fine positioning achieved during marking? A fine adjustment wheel provides controlled, incremental movement for precise alignment before scribing, improving repeatability. What display and control functions are available on the caliper? The digital readout offers ON/OFF, ZERO, UNIT and HOLD buttons for quick zeroing, unit changes and value retention during layout operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Scriber Caliper With 50×40mm Scriber Plate And Adjustable Scribing Pin, Stainless Steel, Data Output RB 5 - Metav IndustryLine
For consistent workshop marking and dependable measurements, benefit from the combination of a 200 mm measuring range, 0.01 mm resolution and an adjustable scribing needle for repeatable layout work; order the Digital scribing caliper M240.152 directly via Metav Werkzeuge or ask our consultants if needed. Digital scribing caliper M240.152 — 200 mm, adjustable scriber, Metav IndustryLine Digital scribing caliper M240.152 is a purpose-built marking and measuring tool for metalworking and general workshop use, combining a compact 200 mm measuring range with a robust scribing plate and moveable scriber for precise layout and repeatable scores. 200 mm digital marking caliper 0.01 mm resolution with four-button display Adjustable scribing needle for precise layout Stainless steel body with solid measuring rod Precise marking and dependable workshop reach The Digital scribing caliper M240.152 places a 200 mm measuring range in the proven Standard class for workshop hand tools, offering the best compromise between reach and stiffness for everyday machine‑shop tasks. The 0.01 mm display resolution provides clear numerical feedback for reliable measurements, while the included 50 x 40 mm scribing plate gives a stable reference surface for scoring. Thanks to the massive measuring rod, the instrument resists torsion during lateral marking, improving repeatability when transferring dimensions to components. Clear digital feedback and secure data handling A tidy, user‑oriented digital display with ON/OFF, ZERO, UNIT and HOLD keys simplifies routine checks and reduces setting errors at the bench; the inch readout is available at 0.0005 in for mixed‑unit workflows. For process documentation the caliper offers data output RB 5, enabling downstream capture of measured values where required. The light‑weight construction at 0.6 kg keeps handling straightforward without compromising the rigid feel needed for accurate layout. Robust design built for everyday use Constructed from stainless steel with a metal housing, the tool tolerates standard workshop strains and keeps wear to a minimum. The adjustable scribing needle (5 x 60 mm) slides for fine positioning and fixes securely for repeat marks, while the solid 15 x 6 mm measuring rod is supplied with the instrument to ensure dimensional stability from the first measurement. Overall, the caliper is engineered for routine marking, quick checks and integration into a busy production environment. For hands‑on advice or to place an order for the Metav IndustryLine digital scribing caliper, contact Metav Werkzeuge directly at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on suitability and delivery options. Technical data SKU: M240.152 Manufacturer: Metav IndustryLine Category: Marking tools (Anreisszeuge) GTIN: 4054469178356 Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.6 kg Plate dimensions: 50 x 40 mm Scriber needle: 5 x 60 mm Measuring rod: 15 x 6 mm Power supply: 3 V Special features Stainless steel with metal housing Adjustable scribing needle Digital display with ON/OFF, ZERO, UNIT, HOLD Solid measuring rod included Data output: RB 5 FAQ What measuring range does this marking caliper cover? The instrument covers a measuring range of 0–200 mm, classifying it as a Standard workshop caliper suitable for general machine‑shop and metalworking tasks. How accurate is the readout of the device? The digital readout delivers a resolution of 0.01 mm (0.0005 in), providing precise numerical feedback for layout and verification work. Is the scribing needle adjustable and replaceable? Yes — the scribing needle on the Digital scribing caliper M240.152 is adjustable for exact positioning and is secured for repeat markings. Which materials is the caliper suited to mark and measure? With a stainless steel body and robust scribing plate, the caliper is ideal for marking and measuring common workshop materials such as steel and aluminium during layout operations. Does the caliper provide a data interface for recording measurements? The Digital scribing caliper M240.152 includes a data output designated RB 5 for integration with data collection systems where needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scratch Gauge Flat Stainless Steel Hardened Scribing Edge With mm Scale - Metav IndustryLine
Take advantage of a stainless steel, flat-profile design with a hardened scribing edge and clear millimetre scale to speed up layout work and reduce rework; order the marking gauge directly via Metav Werkzeuge or consult our specialists for selection advice. M201.194 marking gauge — Flat INOX scribing rule, 200 mm, Metav IndustryLine M201.194 marking gauge is a flat stainless steel scribing rule with a hardened scribing edge and a matt-chromed millimetre scale, designed for precise layout and scribing tasks in metalworking and general workshop applications. Flat INOX body for low-profile scribing Hardened scribing edge for repeatable marks Millimetre scale, analogue precision Precision and material that reduce layout error The flat stainless construction combines a low-profile form with robust surface hardness to support repeatable layout operations. The matt-chromed millimetre scale provides a clear analogue reference while the hardened scribing edge resists wear, so marks remain consistent over many cycles. As a tool in the standard measuring range (max 100–300 mm), this 200 mm rule balances reach and stiffness — a pragmatic choice for everyday workshop layout that minimises alignment errors and reduces time spent on corrective work. Practical usability for workshop workflows Designed as an analogue marking instrument, the flat rule excels where firm, repeatable scribing is required on metal and other engineering materials. The low profile allows access close to edges and in shallow recesses, while the visible scale simplifies rapid transfer of measurements. In production and assembly contexts the tool supports efficient preparation of parts and fixtures by delivering a straightforward, durable method for transferring dimensions, avoiding the complexity of electronic systems when mechanical reliability is preferred. Built for durability and consistent performance Constructed from stainless steel with a matt-chromed scale and a heat-treated scribing edge, the flat rule is made to withstand workshop environments and regular use. The analogue design keeps maintenance simple and parts readily serviceable; the hardened edge reduces the need for frequent replacement, thereby lowering lifetime operating costs. As part of the Metav IndustryLine, this marking instrument reflects a focus on accessible precision for industrial and craft applications, bringing reliable layout accuracy to the bench or production line. Choose the Metav IndustryLine marking gauge for dependable scribing accuracy and contact Metav Werkzeuge for personalised advice or immediate dispatch from our Emmerich stock Technical Data SKU: M201.194 GTIN: 4054469101071 Tariff number: 90173000 ECLASS: 21170302 Label: Streichmaß 200mm, INOX flache Ausführung, Anreißkante gehärtet Facts Measuring range: 0–200 mm Scale: millimetre Analogue instrument: yes Special features Material: stainless steel (INOX) Scale finish: matt-chromed Scribing edge: hardened Execution: flat version Category: marking tool (Anreisszeuge) FAQ What materials can be scribed with this marking gauge? The M201.194 marking gauge is made of stainless steel with a hardened scribing edge and is suitable for scribing on typical workshop materials used in metalworking and general fabrication. Is the millimetre scale suitable for fine layout accuracy? Yes, the matt-chromed millimetre scale on this flat rule gives a clear analogue reference that supports precise layout work within the 0–200 mm measuring range. How does the hardened scribing edge benefit everyday use? A hardened scribing edge on the M201.194 reduces wear from repeated marking, ensuring consistent mark quality and longer service life compared with non-hardened edges. Is this tool appropriate for both bench and on‑machine layout tasks? The flat profile and robust construction make the instrument well suited to bench work and many on‑machine layout situations where a low-profile scribing reference is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scratch Gauge Hardened Scribing Edge With mm Scale - Metav IndustryLine
The combination of a hardened scribing edge, a clear mm scale and robust steel construction ensures precise layout and durable performance; order the marking gauge directly via Metav Werkzeuge or consult the team for application advice. Marking gauge M201.191 — 200 mm hardened scribing edge (Metav IndustryLine) The Marking gauge M201.191 is an analogue workshop layout tool designed for accurate scribing and transfer marking across a 200 mm range, ideal for general metal and woodworking tasks. Hardened scribing edge for lasting precision Matt chrome scale with mm graduation 200 mm measuring range for workshop tasks Robust mild steel construction Precision layout that reduces rework As a dedicated layout instrument, this gauge delivers repeatable line placement thanks to its hardened scribing edge, which resists wear and preserves edge geometry over prolonged use. The clear mm graduation on a matt chrome scale supports exact positioning, making the tool suitable for both coarse and fine layout tasks. By reducing uncertainty at the marking stage, the tool contributes directly to fewer correction cycles and faster parts throughput. Built for workshop endurance and simple handling Constructed from mild steel with a matt-chrome finished scale and a heat-treated scribing contact, the device is balanced for everyday use while offering resilience under shop conditions. The solid build provides tactile feedback during layout without excessive flex, and the analogue design keeps operation straightforward: set, lock and scribe. This simplicity supports efficient workflows in production and repair environments where robust, low-maintenance tools are preferred. Practical range and application focus With a measuring span of 200 mm, the gauge sits in the Standard category of layout tools, offering the optimal compromise between reach and rigidity for general machine- and metalworking applications. The configuration is well suited for marking edges, aligning drill positions and transferring reference lines on components and stock. The instrument’s specification favours repeatable manual processes rather than automated measurement, making it a pragmatic choice for workshops seeking reliable mechanical layout aids. Contact Metav Werkzeuge today to request a specification sheet or to reserve the Metav IndustryLine marking gauge M201.191 for your workshop: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M201.191 GTIN: 4054469101040 ECLASS: 21170302 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Instrument type: analogue marking gauge Scale: mm graduation Category: Anreisszeuge (layout tools) Special features Material: mild steel Scale finish: matt chrome-plated Scribing edge: hardened Brand: Metav IndustryLine FAQ What materials can be marked with this gauge? The marking gauge M201.191 is made from mild steel with a hardened scribing edge and is suitable for marking on metals and common workshop materials where a durable scribe is required. How accurate is the mm scale on the instrument? The mm graduation on the Metav IndustryLine marking gauge provides clear, analogue reference lines for layout work; it is intended for precise manual marking rather than dimensional inspection to micrometric tolerances. Is the scribing edge replaceable or serviceable? The hardened scribing edge is designed for longevity; normal maintenance consists of keeping the edge free from burrs and corrosion. For extended service life, the edge may be professionally reconditioned if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scriber Caliper With Replaceable Carbide Scriber And Roller, 0.05mm Resolution, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of durable materials, a replaceable carbide scribing tip and precise analogue reading for consistent layout work in production environments; order the scribing caliper directly via Metav Werkzeuge or ask the consultants for specification advice. Scribing Caliper with Roller M201.151 – 200 mm, 0.05 mm (Metav IndustryLine) The Scribing Caliper with Roller M201.151 is an analogue stainless-steel marking and measuring instrument designed for precise layout and scribing tasks in machine shops and metalworking production. Replaceable carbide scribing tip 200 mm measuring range, standard workshop length 0.05 mm scale resolution, analogue vernier Stainless steel, matt chrome finish with case Consistent layout and repeatable scribing The scribing caliper is engineered to turn layout work into a reproducible process. The replaceable carbide tip provides a hard-wearing contact point that retains a sharp mark over many cycles, while the integrated roller ensures steady contact against profiles when following edges or marking curved surfaces. With a 200 mm measuring range, the instrument fits the Standard class for workshop use, offering the best compromise between reach and rigidity for common components. The 0.05 mm vernier resolution corresponds to the typical analogue industry standard for robust repeatable measurements and clear layout lines. Built for everyday workshop durability Robustness is central to the design: the body is made from stainless steel with a matt chrome finish, providing corrosion resistance and a low-reflective surface for comfortable use under workshop lighting. A positive locking screw secures the slider to maintain set positions during marking. The solid construction, combined with a modest weight, makes handling straightforward while resisting the knocks of daily use. Protective transport in a case preserves calibration and tip condition during storage and movement between job sites. Practical handling, simple maintenance Reading and marking are kept efficient through the analogue vernier system, which avoids battery dependence and simplifies long-term maintenance. Replacing the scribing tip is a straightforward procedure that restores marking performance without replacing the whole instrument, reducing lifecycle costs and waste. The straightforward mechanical design means familiar operation for machinists and technicians, with little training required to achieve accurate, repeatable layout work. For durable, precise marking in the workshop, choose the Metav IndustryLine Scribing Caliper M201.151 — contact Metav Werkzeuge in Emmerich for purchasing or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.151 GTIN: 4054469100777 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.05 mm Scale type: analogue vernier Weight: 0.2 kg Special features Material: stainless steel, matt chrome-plated Replaceable carbide scribing tip Roller marking function Locking device (fixing screw) Delivery: protective case FAQ How precise is the marking made with this caliper? The scribing caliper delivers a vernier resolution of 0.05 mm, suitable for standard workshop measurements and accurate layout marking with repeatable results. Can the scribing tip be replaced when worn? Yes, the instrument features a replaceable carbide scribing tip, allowing simple renewal of the marking point without replacing the whole caliper. Is this caliper robust enough for daily shop use? The tool is made from stainless steel with a matt chrome finish and a locking screw, and it is supplied in a protective case to withstand everyday handling in the workshop. Which measuring range category does this instrument belong to? With a maximum range of 200 mm, the caliper falls into the Standard category (100–300 mm), offering a balance of reach and stiffness for general machine‑shop tasks. Is an ISO 17025 calibration certificate supplied with the instrument? No ISO 17025 certificate is specified for this item; it is supplied as a standard factory instrument. If an accredited calibration certificate is required, please request details before purchase. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scriber Gauge Aluminium, 0.05mm Graduation, Hardened Scoring Edge, Black Anodised, Supplied in Case - Metav IndustryLine
Take advantage of a lightweight, anodised aluminium construction combined with a hardened marking edge and a fine 0.05 mm nominal tolerance for precise, repeatable layout work; order directly via Metav Werkzeuge or contact the consultants for application advice. Marking Gauge AL 200 mm (M201.191.AL) – Anodised aluminium, 0.05 mm tolerance A compact, metric marking gauge, the Marking Gauge AL 200 mm provides reliable scribing and layout capability for general workshop and metalworking tasks with a hardened scribing edge and millimetre scale Anodised aluminium body, hardened scribing edge Metric mm scale for precise layout 0.05 mm nominal tolerance Supplied in protective transport case Precision layout for everyday workshop tasks This marking gauge delivers a measured balance between reach and stiffness: the 0–200 mm range places it squarely in the standard measuring category favoured in machine and metal workshops. The device is specified with a 0.05 mm nominal tolerance, making it suitable for routine layout where clear, repeatable scribed lines are required. The integrated metric scale simplifies direct reading and alignment, reducing setup time on jigs and workpieces and supporting efficient process flow in small-series production. Robust materials that support repeatable scribing Constructed from anodised aluminium, the tool remains lightweight while resisting corrosion and abrasion; this aids manoeuvrability at the bench and reduces operator fatigue during repeated use. The hardened marking edge is specified to withstand repeated contact with scribing surfaces, ensuring consistent line definition over time. Supplied in a protective transport case, the instrument is protected in transit and storage, preserving calibration and edge integrity for reliable service life. Clear handling and workplace benefits The analogue mm-scale and straightforward clamping mechanism enable fast adjustments without electronics, ideal for harsh shop-floor environments or where simplicity and immediacy matter. As a non-digital layout instrument it requires no batteries and remains serviceable with minimal maintenance. The combination of low weight and solid profile yields repeatable results when marking out components, fixtures or assemblies, supporting quality assurance routines and reducing downstream fitting work. Contact Metav Werkzeuge today for tailored advice on using the Marking Gauge AL 200 mm and to arrange supply from our Emmerich facility. Technical data Article number / SKU: M201.191.AL GTIN: 4054469164533 Category: Marking tools (Anreisszeuge) Description: Marking gauge AL 200 mm, accuracy 0.05 mm, anodised black aluminium Facts Measuring range: 0–200 mm Nominal tolerance / accuracy: 0.05 mm Weight: 0.5 kg Tariff number: 90173000 Special features Material: aluminium alloy Finish: black anodised Marking edge: hardened Scale: mm-scale (metric) Operation: analogue Delivery: protective transport case FAQ What measuring range does this marking gauge cover? The marking gauge covers a measuring range of 0–200 mm; the Marking Gauge AL 200 mm from Metav IndustryLine is therefore classified in the standard workshop range. Is the scribing edge durable for repeated use on metal? Yes, the tool features a hardened marking edge which ensures the Marking Gauge AL 200 mm maintains clear scribed lines during repeated layout tasks. Does the product come with a protective case? The instrument is supplied in a protective transport case, so the Marking Gauge AL 200 mm is delivered ready for safe storage and transit. Who supplies this marking gauge and where can technical advice be obtained? This marking gauge is supplied by Metav IndustryLine; for technical advice and application guidance contact Metav Werkzeuge GmbH (see manufacturer details below) Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200x150 mm Centering Square Matt Chrome Finish 0.6 kg - Metav IndustryLine
Take advantage of the combination of robust tool‑steel construction, a matt‑chrome reading surface and compact dimensions for reliable centring and clear scribing lines; order directly via Metav Werkzeuge or consult our advisors for application guidance. Centring Square M214.172 — Tool‑steel centring angle, matt chrome finish, 200 × 150 mm (Metav IndustryLine) The Centring Square M214.172 is a workshop scribing and alignment tool for layout and centring tasks in metalworking and machine setup, designed for robust everyday use Tool steel construction with matt chrome finish Clear mm graduation for precise marking Compact 200 × 150 mm format for bench use Suitable for centring shafts up to Ø220 mm Precise alignment for layout and setup The M214.172 combines a 200 × 150 mm profile with a finely finished matt chrome surface to provide a consistently legible mm graduation for scribing and layout work. The solid tool steel body delivers the stiffness needed to maintain a true edge during repetitive transfers, which reduces rework and supports faster set‑up times in production. For workshop technicians this means fewer adjustments and a clear, measurable basis for subsequent machining operations. Built for workshop durability and repeatability A hardened tool‑steel construction together with rust‑protected finishing ensures longevity under daily use. The matt chrome readout resists glare, so the graduation remains visible under different lighting conditions and during extended shifts. This durability translates into lower tool turnover and predictable measurement behaviour, improving process stability in assembly and fixture preparation. The compact format makes it easy to stow with other layout gauges while retaining the rigidity expected from a bench scribing instrument. Compatibility and practical handling The centring angle is engineered for practical handling: its format is suitable for marking and centring components, including shafts up to Ø220 mm, making it a flexible choice for turning‑shop routines and on‑machine layout. The pronounced edges provide a reliable datum for scribes and centre punches, while the balanced dimensions support single‑hand placement on small to medium workpieces. Clear graduations facilitate quick comparisons and help maintain a consistent workflow between marking and machining stages. For reliable centring and clear workshop layout, request the Metav IndustryLine M214.172 from Metav Werkzeuge or speak with our Emmerich team for specification advice and fast dispatch Technical data Article number: M214.172 GTIN: 4054469107004 Tariff number: 90172039 Facts Dimensions: 200 × 150 mm Suitable for shaft centring: up to Ø220 mm Category: Scribing/centring tool Special features Material: tool steel, rust protected Finish: matt chrome reading surface Application: workshop scribing, centring and layout Brand: Metav IndustryLine FAQ What materials is the M214.172 suitable for marking and centring? The M214.172 centring square is made from tool steel and is intended for layout on typical workshop materials such as steel and aluminium, providing a firm datum for punches and scribes. Is the mm graduation easy to read under workshop lighting? Yes, the matt chrome finish on the M214.172 reduces reflections and keeps the mm graduation clearly legible for fast and accurate marking. Can the centring square be used to centre shafts and cylindrical parts? The centring square is suitable for centring and scribing work and is specified for use with shafts up to Ø220 mm, assisting in quick alignment for turning and inspection tasks. Does the tool require special storage or maintenance? Routine care for the M214.172 consists of keeping the tool dry and lightly oiled to maintain the rust‑protected surface; the robust tool‑steel construction minimises the need for frequent maintenance. Which workshop applications benefit most from this centring angle? The M214.172 is especially useful for layout, centre‑punch transfer and fixture checking in general metalworking, lathe set‑up and assembly preparation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250 mm Scriber With Straight And 90° Bent Pointed Tips - Metav IndustryLine
Compact dual‑tip scribing awl offering a 250 mm reach and a robust metal shaft for dependable layout marking. Benefit from precise, repeatable marks and the light handling that speeds up setup and reduces fatigue; order the tool directly via Metav Werkzeuge or ask our consultants for application guidance. Scribing Awl 250 mm, two tips (M214.032) – Dual‑tip marking scribe by Metav IndustryLine A Scribing Awl 250 mm, two tips (M214.032) designed for layout and marking tasks in metalworking and general workshop applications Dual tips for versatile marking 250 mm length for extended reach Robust metal body, lightweight 50 g Accurate layout marking for workshop tasks Reliability and practical performance for everyday marking The compact construction combines a metal shaft with a balanced length of 250 mm, yielding a tool that is both sturdy and manoeuvrable. The design supports consistent line quality across routine layout tasks, while the 50 g mass keeps operator fatigue to a minimum during repetitive marking cycles. For workshop operations that demand straightforward, reproducible reference lines, this marking instrument accelerates setup and contributes to shorter fixture and assembly times. Versatility that speeds up setup and access to awkward areas Equipped with two working tips, the tool covers common marking situations without swapping implements, enabling fast transitions between layout tasks. The dual‑tip concept increases adaptability when marking along edges, in pockets or on stepped surfaces. With clear, sharp lines produced on metal substrates, the scribe reduces the need for rework and supports more efficient machine preparation and quality checks. Control and precision for accurate reference lines Ergonomic proportions and a slim shaft support a confident hand‑feel and precise point placement, important when transferring measured positions to workpieces. The straightforward geometry of the tool aids tactile feedback during use, which is crucial for repeatable alignment. As a pragmatic layout aid, the instrument contributes to lower cycle times in setup and inspection routines by offering dependable line placement at the bench or on the machine table. Why choosing a Metav IndustryLine product matters for shops Supplied under the Metav IndustryLine range, the instrument is backed by a supplier that focuses on making precision accessible for workshops of all sizes. Metav’s stock and distribution from Emmerich support reliable fulfilment, while the company’s longstanding presence in the market underpins consistent product quality and availability. For procurement managers seeking to reduce supplier complexity and to standardise workshop tooling, such a pragmatic marking solution fits a wider, efficiency‑oriented tool strategy. Contact Metav Werkzeuge for detailed application advice on the M214.032 scribing awl; stock and specialist guidance are available from Metav Werkzeuge GmbH in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M214.032 GTIN: 4054469106236 Brand: Metav IndustryLine Material: Metal Length: 250 mm Weight: 0.05 kg ECLASS: 21049238 Customs tariff: 90172039 Facts Length: 250 mm Weight: 0.05 kg GTIN: 4054469106236 ECLASS: 21049238 Special features Dual tips for flexible marking Robust metal construction Category: Marking tools (layout and scribing) Images available for reference FAQ What is the primary use of this scribing awl? The Scribing Awl 250 mm, two tips (M214.032) is intended for layout and marking tasks in metalworking and general workshop operations where clear, repeatable reference lines are required. Is the tool heavy to use during repetitive tasks? No, the instrument’s lightweight construction (0.05 kg) and balanced 250 mm length make the M214.032 comfortable for extended use and help reduce operator fatigue. Does the product come from a recognised supplier? Yes, the M214.032 is offered under the Metav IndustryLine range and benefits from Metav Werkzeuge’s supply and quality processes based in Emmerich. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision marking that speeds up workshop tasks
Marking tools are the foundation of accurate fabrication and repeatable setup in industrial workshops. From scribing parallel lines on metal to laying out joinery on timber, the right marking tools ensure cuts, drills and mill passes start from a clear, reliable reference.
How these tools perform on the shop floor
A typical set of marking tools includes the scriber, the scriber needle, the precision caliper and the marking gauge. Each instrument serves a defined purpose: the scriber and scriber needle create fine guide lines for drilling and milling; the precision caliper measures and transfers exact distances for internal and external features; the marking gauge produces parallel lines on wood and other sheet materials. Used correctly, these instruments reduce rework by turning layout into a measurable, repeatable process.
Practical benefits that matter in production
- Improved accuracy for millimetre work, enabling tighter tolerances and more first-pass success.
- Reduced setup time through repeatable marking and rapid transfer of dimensions.
- Versatility across materials — suitable for wood, metal and plastics.
- Ease of use: simple handling of the scriber needle and intuitive adjustment on the precision caliper speeds routine tasks.
- Better quality control: clear, durable scribed lines act as unambiguous guides during cutting, drilling and finishing.
Why Metav is the sensible sourcing partner
Metav stands for democratising precision. As a precision partner with decades of experience, Metav supplies workshop-grade marking tools from its Emmerich-based quality hub, combining a wide range with consistent quality control. With more than 48,000 customers and a portfolio exceeding 250,000 products, Metav offers reliable availability and expert advice, making it a practical choice for procurement managers and workshop professionals seeking a single dependable supplier.
Summary
Well-chosen marking tools — including the scriber, scriber needle, precision caliper and marking gauge — turn layout into a fast, accurate and repeatable step in every production process, raising throughput and reducing scrap.
FAQ
What is the difference between a scriber and a scriber needle?
A scriber produces continuous guide lines for edges and profiles, while a scriber needle creates single, fine marks or narrow lines that serve as precise reference points for drilling or aligning operations.
When should I use a precision caliper for marking?
Use a precision caliper whenever millimetre-accurate distances must be transferred directly to the workpiece, for both internal and external features; it is particularly useful in machine shops and metalworking where exact offsets are required.
Are marking gauges suitable for metalwork as well as woodworking?
A marking gauge is primarily designed for wood, where its sharp fence and beam produce clear parallel lines; for metal, the scriber and scriber needle are generally preferred because they provide the finer, more durable scribed lines needed for machining.
How do marking tools improve production efficiency?
By providing clear, repeatable layout references, marking tools reduce measurement errors and setup iterations, which shortens cycle times and increases first-pass yield on parts.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com