Precision metal drills for reliable, high-performance holemaking
Precision metal drills, commonly supplied as HSS twist drills, are engineered to produce clean, dimensionally accurate cylindrical holes in materials such as alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron and non-ferrous metals like aluminium, copper and brass, delivering consistent results in both manual and CNC operations. Their high-speed steel construction provides exceptional toughness, elasticity and fracture resistance, while variants such as roll-formed HSS-R and ground HSS-G offer cost-effective general performance or enhanced runout accuracy and chip evacuation respectively, and HSS-E or HSS-Co types ensure superior hot hardness when machining stainless or highly alloyed steels. Optimised point geometries (typically 118° for softer steels and 135° for harder grades) combined with a cross grind reduce feed force, enable accurate centring and promote efficient chip removal, improving process reliability and prolonging tool life.
1.5mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Twist Drill – Left-Cutting HSS-G Twist Drill (Ø 1.5 mm, 135° Tip, DIN 338) The Twist Drill left-cutting bit for drilling machines, designed for precise metalworking and for tasks such as removing broken or seized screws. Left-cutting geometry for extracting screws 135° tip for hard materials and stainless steel HSS‑G material for high wear resistance Conforms to DIN 338 for short shank drills Optimised for drilling machines with left rotation Faster metalworking with reduced feed forces The Twist Drill with left‑cutting geometry is engineered for efficient metalworking. Its specialised grind allows cutting in left rotation, which is particularly helpful when extracting broken or seized screws. Compared with standard HSS bits, the sharpened design can achieve up to 40% faster drilling while requiring about 50% less feed force, making machining less strenuous on both operator and machine. Precision entry and less wandering on tough materials A 135° Tip is selected to improve centring and reduce walking on hard materials such as stainless steel. The larger tip angle shortens the initial penetration time and produces a more controlled cut, which is advantageous when working with thicker or tougher alloys. For operators, this means cleaner holes and less need for pilot operations. Durable HSS‑G composition and standardised manufacture Made from HSS‑G, this bit combines high-speed steel hardness with good toughness for repeated use in metalworking. Compliance with DIN 338 ensures consistent dimensions and quality for short shank, cylindrical Twist Drills, so replacement and inventory management are straightforward. For non-experts: DIN 338 describes the geometry and production methods commonly used for short metal drills, ensuring interchangeability across suppliers. Application range and machine compatibility Designed for drilling in a range of metals including alloyed and unalloyed steels, cast steel, and non-ferrous metals, this left‑cutting Twist Drill performs best in a drilling machine that can run in left rotation. Typical uses include general metal fabrication and specialised tasks like out‑drilling screw remains. Operators needing clean, repeatable results from metal to hard plastics will find this bit reliable and robust. Strongly recommended for professionals and workshops requiring a left‑cutting high‑performance Twist Drill from MetavCUT — for technical advice or to confirm suitability for specific applications contact METAV Werkzeuge; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 60015-FDA Diameter: 1.5 mm Tip angle: 135° Execution: Left-cutting For: Drilling machine (left rotation required) Material: HSS‑G Norm: DIN 338 Model series: Profi Line Application: Drills for metal Designation: Twist Drill (short shank, cylindrical) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills from MetavCUT are primarily applied to machining high-strength workpieces and larger drill diameters; their design is easy to re‑grind and withstands higher loads, making them suitable for tasks such as drilling alloyed and unalloyed steel, cast materials and hard plastics. Which three drill types are there? The main drill categories are: Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for metallic materials. Can the MetavCUT Twist Drill be used to remove broken screws? Yes, the left‑cutting MetavCUT Twist Drill is designed for applications including extracting broken or seized screws because the left rotation often helps engage and loosen a screw remnant while drilling.
1.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short HSS-G Drill Bit, 1.5 mm, 135°, Bright Finished, DIN 338 (MetavCUT) The Twist Drill is a short Type N drill bit designed for precision metal drilling on Drilling Machines and workshop hand drills. Short Type N design for stable drilling in metal HSS-G ground for up to 40% faster drilling 135° tip angle for harder materials like stainless steel Fully ground shank for precise centring in chucks Conforms to DIN 338 for short twist drills High precision for demanding metalwork The short Twist Drill in HSS-G material combines a compact geometry with a 135° Tip Angle to improve stability when penetrating hard materials. The reduced free length minimises deflection and vibration, which increases hole accuracy in Steel and Cast components. Conformity with DIN 338 ensures the bit matches standard dimensions and tolerances for short twist drills, facilitating reproducible results in production and repair tasks. Faster results with lower feed force Thanks to the specially ground geometry of the HSS-G grade, drilling speeds can be increased while required feed force is reduced, delivering measurable productivity benefits. The fully ground flute and point geometry are optimised to lower friction and chip resistance, which means less operator effort and improved cycle times when processing alloyed and unalloyed Steel, Cast Iron and non-ferrous Metals. Reliable compatibility with machines and chucks The short Execution and a Fully Ground Shank support secure clamping in hand and machine chucks, while the Overall Length of 40 mm and Spiral Length of 18 mm make the bit suitable for tight working spaces. A Bright Finished surface offers corrosion resistance during storage and easier handling. This design favours repeatable centring and consistent surface finish when used in rotating stationary or portable drilling equipment. Expert advice and safe application For precision tasks and challenging materials, correct speeds, feeds and coolant selection matter. METAV Werkzeuge and the manufacturer MetavCUT provide competent technical advice if application-specific data are required. If uncertain whether this tool meets your requirements or whether machine setup is optimal, contact METAV Werkzeuge for detailed guidance by email or phone—support is available for workshop planning and drill selection to maximise tool life and hole quality. Strong recommendation: Choose the MetavCUT HSS-G short Twist Drill for demanding metal drilling and consult METAV Werkzeuge for tailored technical support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Designation: Twist Drill Marke: MetavCUT SKU: 27015-FDA Type: Type N Diameter: 1.5 mm Tip angle: 135° Material: HSS-G Norm: DIN 338 Execution: short Overall length: 40 mm Spiral length: 18 mm Shaft finish: fully ground Colour: bright finished Intended for: Drilling Machine / Hand Drills Model series: Basic Line Applications: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The Twist Drill by MetavCUT in Type N execution is primarily applied to the machining of high-strength materials and larger hole diameters; its shape is easy to regrind and it withstands considerable loads while providing reliable performance in Steel and Cast applications. Which three drill types exist? Commonly distinguished drill types are Metal Drill (for Steel and alloys), Wood Drill and Masonry/Concrete Drill; the MetavCUT Type N Twist Drill falls into the Metal Drill category and is optimised for such tasks. Why are Twist Drills sharpened (pointed)? The sharpening reduces the cross-cut at the tip, which significantly lowers friction and thus the required feed force; a well-pointed Twist Drill (MetavCUT Type N) also centres more reliably in the workpiece for cleaner entries. Can a metal drill be used in wood? A Metal Drill such as the MetavCUT Type N Twist Drill can be used in Wood, but guidance and finish are typically inferior compared with a dedicated Wood Drill; metallic bits are easier to resharpen and show less self-feed in softer materials. At what drilling depths is the Twist Drill most used? A through-hole in solid material is usually executed with a Twist Drill; for diameters up to about 20 mm and drilling depths up to 100 mm, the short or standard Twist Drill is the most frequently used tool. Which is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is not universally correct; the MetavCUT HSS-G selection should be evaluated against actual working conditions to determine whether the additional cost of HSSE is justified.
1.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — HSS-G Short Twist Drill, Ø 1.5 mm, 118° (Type N), Bright Finished by MetavCUT The Twist Drill (Type N) is a short HSS-G metalworking drill with a 1.5 mm diameter and a 118° tip angle, optimised for precise drilling in metals using a Drilling Machine. Short HSS-G design for increased rigidity DIN 338 standard for short twist drills 118° tip for reliable centring in metals Fully ground shank for precise runout Ideal for use in Drilling Machine applications Precision drilling with reduced deflection for consistent holes The short design of this HSS-G twist drill reduces overhang and therefore minimises bending and vibration during machining, which leads to more consistent hole geometry and longer tool life. The combination of short length and fully ground geometry provides higher stiffness compared with standard-length drills, so less radial runout occurs when used in a Drilling Machine. As a result, operators benefit from improved hole quality and fewer rejects when working with steels, cast iron and non-ferrous metals. Sharp ground geometry that gives clean, accurate bores A fully ground flute geometry produces very sharp cutting edges and excellent concentricity. Grinding (HSS‑G) yields a high degree of roundness and a clean cutting action, which is especially valuable for demanding metalworking tasks. The 118° tip offers a compromise between fast penetration and reliable centring; it is commonly used for general metalwork and gives easier entry on slightly curved surfaces. Note that ground drills tend to be sharper but require appropriate coolant and moderate feed to avoid brittle fracture during heavy interrupted cuts. Target users and typical applications for best results This short Type N twist drill is designed for professional workshops, toolrooms and industrial maintenance where precise, repeatable metal drilling is required. It suits machining of alloyed and unalloyed steel, cast and sintered irons, non‑ferrous metals and hard plastics. The product is particularly useful when working on bench and floor Drilling Machines or when minimal runout is essential for subsequent reaming or tapping operations, delivering reliability for quality‑focused tradespeople. Practical guidance to maximise performance and service life Use cutting fluid or internal/external cooling when drilling steels and hard materials to reduce temperature and preserve cutting edges. Secure the workpiece and avoid excessive overhang from the chuck; the short geometry already reduces deflection, but correct clamping and moderate feed rates ensure best results. If drilling softer materials such as aluminium, adapt speed and lubrication to avoid built‑up edge. Remember that the Type N spiral is a general‑purpose metal geometry and may not be ideal for specialised wood or masonry work. Strong recommendation: For precision metal drilling choose the MetavCUT short HSS‑G Twist Drill (Type N) — for technical questions or personalised advice METAV Werkzeuge provides comprehensive support via info@metav-werkzeuge.com, Tel +49 2822 7131930 or WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 48015-FDA Type: Type N Material: HSS-G Norm: DIN 338 Diameter: 1.5 mm Tip angle: 118° Overall length: 40 mm Spiral length: 18 mm Execution: short Colour: bright finished Shank finish: fully ground Intended for: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for with the MetavCUT Type N Twist Drill? The MetavCUT Twist Drill Type N is used primarily for machining high‑strength materials and larger drill diameters; its short configuration lends itself to precise metalworking operations. The geometry is relatively easy to re‑grind and holds up under considerable loads, making it suitable for demanding workshop tasks. Which three drill types exist and how does the MetavCUT Twist Drill fit in? There are three common drill families: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category (Type N), optimised for steel and ironwork rather than masonry or specialised timber boring. Can Twist Drills be used for wood? Metal drills such as the MetavCUT Twist Drill can be used in wood but they provide less guidance and a rougher finish than dedicated wood bits. They are easier to resharpen and have lower self‑feeding tendency, but for best results in timber a purpose‑designed wood drill is recommended.
1.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
MetavCUT Twist Drill (Short) — Twist Drill, HSS-G, 1.5 mm, TIN-coated, 118° tip, DIN 338 The Twist Drill (Short) from MetavCUT is a precision HSS-G drill intended for metalworking on drilling machines and hand drills, combining a short, rigid design with TIN coating for longer life and reliable centring. MetavCUT Twist Drill Short 1.5 mm diameter TIN-coated for extended tool life Fully ground shank for precise runout DIN 338 compliant short design for metal Up to 40% faster drilling with lower thrust Precise Metalworking with Reduced Runout and Better Control Designed for demanding metal applications, the Twist Drill offers a 1.5 mm cutting diameter and a fully ground shank that improves concentricity and reduces runout. This results in cleaner holes and more consistent fits when working with steels and non-ferrous metals. Users benefit from the increased accuracy when performing repetitive or precision drilling tasks on stationary or portable drilling machines. Short Design for Greater Stability and Faster Results A shorter overall length significantly reduces the unsupported overhang, improving stability and minimising bending. The short configuration enhances stability and precision, making the tool especially suitable for drilling hard materials where deflection would otherwise compromise hole quality. For workshop setups that require tight tolerances, the compact geometry helps achieve faster cycle times without sacrificing control. Durable Construction: HSS-G Material and TIN Coating Explained Manufactured from HSS-G (ground high-speed steel) and finished with a TIN-coated surface, this Twist Drill combines sharp cutting edges with a low-friction layer. HSS-G means the flutes and geometry are produced by grinding, yielding very sharp edges and high concentric accuracy. The Titanium Nitride coating reduces friction and wear under proper cooling, extending tool life during serial metal drilling operations and lowering the risk of premature dulling. Practical Application Tips and Suitable Materials With a 118° tip angle, the drill offers easier centring on slightly curved or coated surfaces and works well in softer to medium-hard materials; combined with the short design it is also effective in steels and cast materials when appropriate coolant is applied. For best results in alloyed or unalloyed steels, use steady feed, proper clamping and coolant. The tool complies with DIN 338, indicating it meets standard dimensions and tolerances for short twist drills with cylindrical shanks. We recommend the MetavCUT Twist Drill Short for precision metal drilling — for expert technical advice, suitability checks or ordering assistance contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 — METAV Werkzeuge provides comprehensive and competent consultation to ensure this tool meets your requirements Designation: Twist Drill (Short) Brand: MetavCUT SKU: 28015-FDA Diameter: 1.5 mm Spiral Length: 18 mm Overall Length: 40 mm Tip Angle: 118° Material: HSS-G (ground high-speed steel) Coating: TIN-coated (Titanium Nitride) Shank Finish: Fully ground Execution: Short Applicable Machine: Drilling Machine / Hand Drill Norm: DIN 338 Model Series: Basic Line Colour: TIN-coated Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill (Short) is intended primarily for metalworking and performs well in alloyed and unalloyed steel, Tempered Cast Iron, Cast Iron, Sintered Iron, Copper Alloys, Bronze and certain Hard Plastics when used with appropriate coolant and machine settings. For what is a Twist Drill used? A Twist Drill is mainly used for machining high-strength materials and larger hole diameters; its ground geometry is easy to re-sharpen and resists higher loads, making it suitable for demanding metalworking tasks while maintaining good centring and durability. Which three drill types exist? There are three common drill types: Metal drills, Wood drills, and Masonry/Concrete (Stone) drills. Why are Twist Drills sharpened? The sharpening reduces the secondary cutting edge at the tip, which lowers friction and therefore the required feed force; sharpening also improves centring, so the MetavCUT Twist Drill achieves more accurate starts and smoother cutting in the workpiece.
1.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill (Type N) – Short, 1.5 mm, 118°, TiN-coated, HSS‑G, DIN 338 by MetavCUT A Twist Drill (Type N) designed for precise metalworking, offering a short, stable design and TiN coating for extended tool life. Short HSS‑G design for improved stability TiN-coated for reduced wear and longer life Fully ground shank for faster, cleaner drilling 118° point angle suited to softer metals and centring Conforms to DIN 338 for reliable manufacturing quality Stable holes with less deflection for precision metalwork The short HSS‑G construction reduces overhang and significantly increases Stability during drilling, which helps to avoid chatter and bending. Because the Flute Geometry is produced by CNC grinding, the cutting edges are exceptionally sharp and ensure clean chip evacuation. This results in a Precision improvement for demanding tasks such as drilling in Steel, Cast Iron or Copper alloys. For stationary machines and bench work, the shorter Projection enables more controllable feed and better repeatability. Faster cutting with lower feed forces thanks to grinding A fully ground Shank and flute geometry enable up to 40% faster drilling speeds while requiring substantially less axial force compared with rolled alternatives. The TiN Coating reduces friction and thermal wear, meaning longer service life under continuous use when combined with appropriate cooling. This advantage translates into higher throughput and lower tool-change frequency, which is particularly valuable in production environments and professional workshops. Versatile application spectrum and material compatibility Engineered as a Type N normal-spiral drill, this short variant is well suited to general metalworking tasks. It performs reliably in alloyed and unalloyed Steel, Tempered Cast, Cast Iron, non‑ferrous Metals like Copper and Bronze, and even hard plastics. The 118° point angle assists centring on slightly curved surfaces and is often preferred when a balance between fast penetration and clean hole finish is required. Practical considerations for safe, efficient use For optimal results, use appropriate cutting fluid or coolant when machining metals to lower temperatures and extend life. The shortened length reduces the risk of breakage under lateral loads, but because ground drills can be relatively brittle, firm clamping and steady feeds are recommended. When high precision is required, the reduced runout of a ground Twist Drill helps deliver consistent diameters and better surface quality. Who benefits from this design Workshop professionals, tool rooms and precision fabricators profit most from the shorter TiN‑coated HSS‑G solution: where repeatable hole quality, tool life and machining speed matter. The product is designed to meet industrial expectations for durability and consistency while remaining easy to integrate into standard Drilling Machines and production routines. Strong recommendation: Choose the MetavCUT short TiN‑coated HSS‑G Twist Drill for precision metal applications — for further technical advice or to confirm suitability for specific tasks, contact METAV Werkzeuge’s competent support team at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill / Short Spiralbohrer Brand: MetavCUT SKU: 46015-FDA Diameter: 1.5 mm Overall length: 40 mm Spiral length: 18 mm Point angle: 118° Type: Type N Execution: Short Coating/Colour: TiN-coated Shank execution: Fully ground Material: HSS-G Norm: DIN 338 Application: Drills for Metal / For Use in Drilling Machine Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill mainly used? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its short design and TiN coating make it suitable for precise operations in alloyed and unalloyed Steel, Cast Iron and non‑ferrous metals. This geometry is easy to re‑grind and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for a wide range of metallic materials.
1.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short Type N, 1.5 mm, 118° Tip, TiN-coated, HSS-G, DIN 338 (MetavCUT) The Twist Drill short Type N is a compact HSS-G metalworking drill for Drilling Machines, designed for stable, precise holes in a wide range of metals. Short Twist Drill design for enhanced stability HSS-G material for high wear resistance TiN-coated surface reduces friction and wear Fully ground shank for precise concentricity DIN 338 standard for metalworking reliability High performance through material and coating Engineered for demanding metalworking, this Twist Drill uses HSS-G (ground high-speed steel) to combine hardness and sharpness. The TiN-coated surface reduces friction and heat generation, which extends tool life and lowers wear during continuous operation. Compliance with DIN 338 assures consistent manufacturing tolerances and suitability for both stationary and portable drilling equipment. These material choices enable reliable results and predictable tool replacement cycles. Precision and reduced runout for cleaner holes A short overall length and a fully ground geometry minimise overhang and bending, which results in better concentricity and less radial runout. The 118° tip angle offers easier centring on curved or slightly uneven surfaces and is suited to a variety of metallic materials. With a spiral length of 18 mm and an overall length of 40 mm, the drill delivers controlled chip evacuation and stable cutting action, especially where tight tolerances and clean hole walls are required. Faster drilling with lower effort Compared with conventional HSS variants, the ground HSS design enables up to 40% faster drilling while requiring about 50% less axial force under suitable conditions. Reduced friction from the TiN coating further lowers cutting temperatures and tool wear. For best results in tougher alloys, use appropriate cutting speeds, lubrication or coolant and secure clamping; this drill is intended primarily for metal applications on compatible Drilling Machines. Tailored for metalworking professionals and workshops Designed as a Type N “normal spiral” twist drill, this short version excels in machining alloyed and unalloyed steel, cast iron, copper, bronze, sintered iron and hard plastics. The combination of short reach and robust HSS-G material makes it a practical choice for toolrooms, maintenance departments and metal fabrication shops that prioritise precision and tool longevity. MetavCUT’s Profi Line emphasises repeatability and serviceability in industrial environments. Strongly recommend selecting the MetavCUT Twist Drill short Type N for precise metal drilling — for detailed advice or additional technical data contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill (Short) Brand: MetavCUT SKU: 41015-FDA Diameter: 1.5 mm Spiral length: 18 mm Overall length: 40 mm Point angle: 118° Type: Type N Material: HSS-G Coating: TiN-coated Shank execution: Fully ground Execution: Short For machine: Drilling Machine Application: Drills for metal Norm: DIN 338 Model series: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills from MetavCUT, specifically the short Type N metal drill, are mainly used for machining high-strength materials and larger hole diameters where stability matters. Their ground geometry and TiN-coated surface make them easier to resharpen and capable of withstanding higher loads, which is why they are often chosen for demanding metalworking tasks. Which 3 drill types exist? The main drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metals rather than for wood or masonry. Are you unsure whether this tool meets your specific requirements or need further technical specifications? METAV Werkzeuge provides comprehensive and competent advice for complex tools — contact us anytime at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271.
1.5mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill — Metal Twist Drill (HSS‑G), Ø 1.5 mm, 135° Tip, DIN 338, Model Spezial, Shaft without multi‑bevel cutting edge and triangular shank, Overall Length 40 mm, Spiral Length 18 mm, Brand MetavCUT A versatile Twist Drill metal drill bit designed for drilling machines and hand drills, engineered for precise holes in a wide range of metals and technical plastics. HSS‑G material for high wear resistance 135° Tip for clean entry in hard materials Conforms to DIN 338 for short cylindrical drills Up to 40% faster drilling performance Reduced feed force by up to 50% Maximise Speed and Reduce Effort with Advanced HSS‑G Technology The HSS‑G composition of this twist drill delivers elevated hardness and thermal stability, which translates into faster drilling and longer tool life when working with alloyed and unalloyed steels. Thanks to the optimized geometry and the 135° Tip, initial penetration is smoother and the risk of walking is reduced, allowing for consistent centring and clean holes. This combination reduces the required feed force, making drilling less physically demanding and improving cycle times on both stationary and portable Drilling Machines. Reliable Hole Quality for Metalworking and Technical Plastics Designed in accordance with DIN 338, this short twist drill provides reproducible results in metals such as Steel, Cast Steel, Gusseisen and Non‑Ferrous Metals, as well as in Hard Plastics. The carefully ground tip produces grit‑free hole edges, minimising post‑processing. For craftsmen and technicians who value neat, repeatable holes, this tool reduces burr formation and supports high‑quality assembly work in workshop and production settings. Practical Use and Compatibility with Common Machines Engineered for use with Hand Drills and standard Drilling Machines, the Twist Drill offers straightforward handling for everyday metalworking tasks. The specified overall and spiral lengths (40 mm and 18 mm respectively) suit through‑holes and shallow blind holes up to typical depths used in mechanical assembly. Because the shaft is supplied without multi‑bevel cutting edge and triangular shank, verify machine chuck compatibility before use; METAV Werkzeuge provides expert advice to ensure the correct bit‑and‑chuck pairing. Who Benefits Most from This Twist Drill This drill bit is aimed at professionals and advanced hobbyists who require dependable performance in metalworking operations. Production technicians, maintenance teams and toolroom staff benefit from predictable cutting behaviour and reduced tool changes due to wear. For those specifying tools for workshop fleets, the conformity to DIN 338 simplifies standardisation and procurement decisions. Durability, Standards and Safe Handling The short design and the HSS‑G material ensure dimensional stability during repeated cycles, while the 135° Tip is especially suitable for tougher materials such as stainless steel. Observing appropriate cutting speeds, coolant use and clamping methods will prolong service life and maintain hole quality. For complex applications or unusual alloys, METAV Werkzeuge offers tailored technical support to define speeds, feeds and coolant strategies. Strongly recommended: Choose the MetavCUT Twist Drill for demanding metalworking tasks and contact METAV Werkzeuge for personalised technical consultation — they provide comprehensive advice to ensure the correct tool selection and optimal machining parameters. For assistance: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 55015-FDA Diameter: 1.5 mm Tip Angle: 135° Spiral Length: 18 mm Overall Length: 40 mm Material: HSS‑G Standard: DIN 338 Model Series: Spezial Shaft Execution: without multi‑bevel cutting edge and triangular shank Intended Use: Drills for metal Suitable Machines: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (metal Twist Drill) reliably machine? The MetavCUT Twist Drill in HSS‑G is designed for machining alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast Iron, Non‑Ferrous Metals and Hard Plastics. Its material and geometry ensure wear resistance and consistent cutting performance when used with appropriate speeds and cooling. Why are Twist Drills used and where do they perform best? Twist Drills are primarily used for machining high‑strength materials and larger diameters; they are easy to resharpen and withstand significant loads. The MetavCUT Twist Drill is especially suited to metalworking tasks where clean entry and rapid drilling are required. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills, reflecting the principal material groups and typical cutting geometries. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross‑edge at the point of the twist drill, lowering friction and therefore the feed force required. A properly sharpened tip also improves centring in the workpiece, resulting in more accurate and efficient drilling.
1.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — HSS-G Twist Drill (Diameter 1.5 mm | Point Angle 118° | Long | Bright-Finished | Fully Ground | DIN 340) — MetavCUT The Twist Drill is a long HSS-G drill bit for drilling machines, optimised for deep, precise metal drilling and reliable centring in softer metals. Long design for deep or hard-to-reach holes HSS-G Fully Ground for precise metal drilling 1.5 mm diameter for fine, accurate boreholes 118° point angle for easier centring in softer metals Conforms to DIN 340 for standardised performance Faster, cleaner holes thanks to HSS-G and fully ground geometry The HSS-G material and the Fully Ground flute geometry deliver measurable performance advantages for metalworking. Ground flutes created by CNC grinding produce very sharp cutting edges and high concentricity, which results in cleaner bore surfaces and reduced deviation. According to material data, this design can enable up to 40% faster drilling and requires roughly 50% less feed force compared with conventional rolled HSS drills, so users benefit from higher throughput and less operator fatigue in repetitive tasks. Reach deeper and work in confined spaces with the long version The long execution (DIN 340 style) of this Twist Drill provides extended Spiral Length and Overall Length for deeper bores or when the hole lies recessed. With a Spiral Length of 45 mm and Overall Length of 70 mm, this bit is designed to access internal or hard-to-reach positions where a standard-length bit would be too short. This makes it particularly useful for workshop tasks, maintenance jobs and component assembly where extended reach is required while maintaining drill stability. Better centring and controlled entry thanks to the 118° point A Point Angle of 118° is well suited to softer metals and many non-ferrous materials, offering a compromise between cutting aggression and centring behaviour. The geometry reduces the tendency to wander on curved or uneven surfaces and improves initial positioning without excessive burr formation. For customers unfamiliar with drilling geometry: a larger Point Angle spreads the cutting action, while a smaller angle aids centring on rounded parts — 118° is often chosen for general metalwork and for easier start in aluminium and similar materials. Built for metalworking professionals and versatile applications This Twist Drill from MetavCUT is engineered for drilling machines and is primarily intended for metalworking tasks. It is suitable for alloyed and unalloyed steels, cast and temper steels, grey and spheroidal cast irons, sintered iron, non-ferrous metals and hard plastics. The Bright-Finished surface aids corrosion resistance and handling, while the Fully Ground shank supports precise clamping and minimal runout. Note that ground HSS can be more brittle than rolled types, so the bit performs best under controlled feed and with appropriate cooling on stationary or machine setups. Strong recommendation: For precision deep-metal drilling choose the MetavCUT Twist Drill with HSS-G and DIN 340 long execution — METAV Werkzeuge provides expert advice and support, contact us at 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Marke: MetavCUT SKU: 53015-FDA Diameter: 1.5 mm Point Angle: 118° Execution: Long (DIN 340 style) Colour / Finish: Bright-finished For Drilling Machine: Drilling Machine Spiral Length: 45 mm Overall Length: 70 mm Shank Execution: Fully Ground Model Series: Standard Line Material: HSS-G Norm: DIN 340 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Twist Drill be used in a hand drilling machine? The MetavCUT Twist Drill is suitable for use in a drilling machine; however, because the HSS-G Fully Ground geometry can be more brittle than rolled types, it performs best in a stable drilling setup or with controlled feed and appropriate cooling when used in portable applications. Is cooling necessary for the MetavCUT Twist Drill when drilling steel? When using the MetavCUT Twist Drill in steel or other hard materials, applying coolant or cutting fluid is recommended to extend tool life and maintain cutting performance for this HSS-G Twist Drill. What is a Twist Drill used for? A Twist Drill is primarily applied to the machining of high-strength materials and larger drill diameters. The form is easy to regrind and can withstand greater loads. The MetavCUT Twist Drill is therefore used especially for deep holes and demanding metalworking tasks. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. For metalworking tasks the MetavCUT Twist Drill belongs to the metal drill category. Why are Twist Drills pointed? The point sharpening reduces the cross-cut at the tip of the Twist Drill. By pointing the tip, friction forces are significantly reduced so lower feed forces are required and the drill tip centres more accurately in the workpiece. Can you use a metal Twist Drill for wood? A metal Twist Drill such as the MetavCUT Twist Drill can be used in wood, but it offers poorer guidance and a less clean finish compared with dedicated wood drills. Metal drills are easier to regrind and have lower self-feeding tendency.
1.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 1.6 mm, 118°, black, DIN 338 The Twist Drill Type N is a short High Speed Steel drill designed for precise metal drilling with a 1.6 mm diameter and a 118° point angle, suitable for Drilling Machines and hand drills. Short HSS Twist Drill 1.6 mm diameter 118° point angle for quick centring DIN 338 short design for higher stability Type N normal spiral for metal machining Black finish for corrosion resistance Greater accuracy thanks to short design and high rigidity A short configuration reduces overhang and bending, delivering improved stability and more accurate hole positions when working with metal. The compact geometry of this Twist Drill minimises chatter and allows consistent feeds even when using portable Drilling Machines. Professionals and hobbyists benefit from a compact bit that keeps drill axis deviation low, producing clean holes with minimal rework. Robust HSS material and application guidance for metal Manufactured from HSS (High Speed Steel), this Type N drill combines wear resistance with toughness; the material choice makes the bit suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The 118° point angle offers reliable centring on common metal surfaces and is a practical compromise between cutting aggressiveness and tip life. For best results use steady feed rates and correct cutting fluid when machining harder materials. Who should use this drill and how it stands out This Twist Drill targets workshops, tool rooms and dedicated DIY users who require precision in metalworking. The Type N normal spiral is optimised for metal cutting, providing efficient chip evacuation and predictable performance. The black surface finish improves resistance to corrosion during storage and handling. Choose this short HSS bit when dimensional accuracy and durability matter more than deep-hole capability. We recommend the MetavCUT Twist Drill for reliable metal machining — for technical advice or to confirm suitability contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40016-FDA Durchmesser: 1.6 mm Spitzenwinkel: 118° Gesamtlänge: 43 mm Spirallänge: 20 mm Ausführung: short Typ: Type N Material: HSS Farbe: black Für Bohrmaschine: Drilling Machine Norm: DIN 338 Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill mainly used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger-diameter metal holes; its shape is easy to regrind and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? In general the three main drill categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for cutting metal. Is the MetavCUT Twist Drill suitable for stainless steel? The MetavCUT Twist Drill in HSS can drill stainless steel with correct coolant and reduced feed; however for prolonged work in highly abrasive or very hard stainless grades consider specialised coatings or higher‑alloy variants. How should the MetavCUT Twist Drill be sharpened and maintained? Sharpen the Twist Drill on a bench grinder or dedicated drill sharpener following the original point geometry; maintaining the 118° point and even lips preserves centring and reduces required feed forces.
1.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, Ø 1.6 mm, 118°, 5% cobalt-alloyed, HSS‑E, DIN 338, Fully Ground (MetavCUT) The Twist Drill Type N short is a precision metal‑drilling tool designed for use in a Drilling Machine, offering a compact overall length and high stability for accurate holes in steel and non‑ferrous metals. Precision short design for stable drilling 1.6 mm Diameter for fine metalwork 118° Tip angle for reliable penetration in softer metals 5% Cobalt‑alloyed HSS‑E for heat resistance and wear life Fully ground shank for high runout accuracy Greater Stability for Accurate Metal Holes The short configuration of this Twist Drill reduces the cantilevered length at the chuck, which results in noticeably lower deflection and improved positional accuracy when drilling. The shorter Spiral Length combined with a compact Overall Length provides a clear benefit for demanding jobs where hole tolerance matters. For workshops using a Drilling Machine, this translates into fewer rejects and less rework, because the tool geometry favours straight, concentric holes even in tougher metals. Heat Resistance and Consistent Cutting Performance Made from HSS‑E with a 5% cobalt alloy, the drill resists softening at elevated temperatures, which preserves cutting edge geometry during prolonged use. The 118° Tip Angle supports efficient cutting in softer steels and reduces walking on curved surfaces, while the Type N Normal Spiral geometry remains the recommended choice for general metal drilling. This material and geometry pairing means longer tool life under intermittent loads and improved chip evacuation in typical metalworking applications. High Precision Finish through Fully Ground Geometry The fully ground flute and geometry, compliant with DIN 338, ensure sharp cutting lips and excellent concentricity. Grinding produces cleaner cutting edges than roll‑forming, which leads to superior hole quality and a better surface finish in the workpiece. Because ground drills can be more brittle than rolled equivalents, it is advisable to use appropriate coolant and moderate feed rates for deep or interrupted cuts to avoid premature tool breakage. Suited Users and Typical Applications This short Type N twist drill is aimed at metalworkers, toolrooms and engineering workshops that require reliable small‑diameter drilling in alloyed and unalloyed steels, cast iron, non‑ferrous metals and plastics. The design is particularly helpful when working on a Drilling Machine where rigidity and repeatable positioning are priorities. For users uncertain about compatibility with specific materials or machine setups, METAV Werkzeuge provides expert consultation to match tooling to application and to recommend optimal machining parameters. Strong recommendation: The MetavCUT Twist Drill short Type N is ideal for precision metalworking—contact METAV Werkzeuge for personalised technical advice via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 47016-FDA Diameter: 1.6 mm Tip angle: 118° Type: Type N Execution: short Overall length: 43 mm Spiral length: 20 mm Material: HSS‑E (5% cobalt‑alloyed) Shank execution: fully ground Application: Drills for metal / suitable for Drilling Machine Model series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is primarily applied to the machining of high‑strength materials and larger drill diameters; its short design and material composition make it suitable for demanding metal drilling tasks where stability and precision are required. The geometry is easy to re‑grind and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are Metal Drills (like the MetavCUT Type N Twist Drill), Wood Drills, and Stone/Concrete Drills, each optimised in geometry and material for its respective substrate. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the size of the cross‑cutting edge, which significantly lowers friction and therefore reduces the required feed force. Sharpening also improves centring of the drill tip in the workpiece. Can a metal Twist Drill be used to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal drills are easier to re‑grind and typically exhibit less self‑feeding action in wood.
1.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Dateninkonsistenz festgestellt: Der angegebene Durchmesser 1,6 mm fällt in den Mikro-Bereich (0,05–2,0 mm), für den die Cluster-Empfehlung klar aussagt, dass Bohrer nicht für Handgeführte Maschinen geeignet sind. Gleichzeitig ist im Feld fur_bohrmaschine die Nutzung mit einer Handbohrmaschine angegeben. Aufgrund dieses Widerspruchs kann keine verlässliche und sichere Produktbeschreibung erstellt werden. Bitte prüfen und korrigieren Sie entweder die Angabe zur vorgesehenen Maschine oder bestätigen Sie, dass der Spiralbohrer trotz Mikro-Durchmesser für den Einsatz in Handbohrmaschinen freigegeben ist. Ohne diese Klärung sind Aussagen zur Einsatzempfehlung, zur Standzeit und zur Handhabung nicht zuverlässig ableitbar. SKU 48016-FDA für die Rückmeldung verwenden. Nach Korrektur der Daten wird umgehende Erstellung der vollständigen Produktbeschreibung übernommen.
1.75mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, 1.75 mm diameter, 118° point angle, black, DIN 338 A Twist Drill (Type N) designed for precise metal drilling with a 1.75 mm diameter and a 118° point angle for reliable centring in standard machining applications. Short HSS Type N for precise metal drilling 118° point angle for reliable centring 1.75 mm diameter with 43 mm overall length DIN 338 compliance for standardised quality Black short design for enhanced stability High stability and material benefits for demanding metalwork Constructed from HSS (High Speed Steel), this short Twist Drill offers a robust balance of elasticity and strength that reduces the breakage risk when machining small diameters. The short execution increases stability and minimises deflection during drilling, which results in more consistent hole geometry and longer life under cyclic loads. For customers requiring dependability in series production, the combination of HSS and a short design delivers a reliable solution. Suitable applications and what the geometry achieves The Type N geometry is the classical choice for metalworking: ideal for drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics. The 118° point angle provides easier penetration and better centring on mildly curved surfaces, which helps reduce wandering at the start of a hole. When paired with appropriate speeds and feeds, this drill suits both stationary drilling machines and hand-operated drilling machines for controlled, repeatable results. Who benefits from this tool and why it was made Engineers, toolroom technicians and maintenance professionals who require precise, stable holes in metal will value the short design and DIN 338 standard compliance. The drill is optimised for situations where rigidity matters more than reach, such as countersunk setups, jig operations or when machining on workpieces with limited overhang. The short flute length simplifies chip evacuation for small diameters, supporting efficiency on the shop floor. Standard conformity and practical guidance for selection Compliant with DIN 338, this short twist drill meets the dimensional and production specifications expected in industrial environments. The designation “short” refers to the reduced overall and spiral length, improving rigidity compared with standard-length drills of the same diameter. For small-diameter holes up to the specified length, this design minimises vibration and produces a cleaner finish, making it suitable for precision tasks in metal fabrication. Strong recommendation: The MetavCUT Twist Drill Type N in HSS is an excellent choice for stable, precise metal drilling — for further technical advice or to confirm suitability for specific applications, contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 400175-FDA Diameter: 1.75 mm Point angle: 118° Type: Type N Colour: black Execution: short Material: HSS Spiral length: 20 mm Overall length: 43 mm Norm: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drilling diameters in metalworking; its design is easy to regrind and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category. Why are twist drills pointed? The point sharpening reduces the cross-edge at the drill tip; for the MetavCUT Twist Drill Type N this lowers friction, reduces required feed forces and improves centring in the workpiece. Can a Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill Type N can be used in wood, but it offers less guidance and a less clean finish compared with dedicated wood drills; it is, however, easier to regrind and has a lower self-feeding tendency. For which drilling depths is the Twist Drill most used? A full-diameter through-hole is often performed with a twist drill; for diameters up to around 20 mm and drilling depths up to about 100 mm, the twist drill is the most frequently used tool, applicable to the MetavCUT Twist Drill Type N within its length limits. What is better, HSS or HSSE? The common belief that HSSE steels are universally superior to HSS is not correct; choice should be based on actual working conditions and whether those conditions justify the higher price — the MetavCUT Twist Drill Type N in HSS is suited to many standard metalworking tasks.
1.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N Short HSS, 1.7 mm, 118°, Black, DIN 338 The Twist Drill (Type N) is a short HSS metal drill designed for precision drilling with a 1.7 mm diameter and a 118° tip angle, suitable for use in drilling machines and hand drills. Short design for high stability Precision 1.7 mm diameter for fine holes 118° tip angle for fast centring HSS construction for metalworking durability Conforms to DIN 338 for standardised quality High stability and accuracy for metalworking tasks Thanks to its short design and HSS material, this short twist drill provides increased rigidity and reduced bending during operation, which translates directly into more accurate hole positions. The reduced overhang improves tool life in demanding metalworking environments, making it ideal for setups where concentricity matters. Use in hand drills and drilling machines benefits from the stable geometry to achieve repeatable results with minimal runout. Optimised tip geometry for reliable penetration The 118° tip angle is chosen to balance entry behaviour and centring for common metals; it facilitates reliable penetration and reduces walking on curved or non-flat surfaces. For operators unfamiliar with tip angles: a smaller angle eases initial centring, while larger angles shorten the time to break through harder materials. This Type N geometry is a classic choice for metal, offering dependable starting behaviour without excessive cratering. Material selection and standard conformity for consistent performance Manufactured from HSS (High Speed Steel) and complying with DIN 338, this short twist drill offers a combination of toughness and heat resistance appropriate for alloyed and unalloyed steels, cast iron, non-ferrous metals and plastics. DIN 338 classification ensures consistent dimensions and shank form, simplifying tool selection for machining centres and maintenance workshops that require standardised replacement tools. Practical application and who benefits most Designed primarily for precision metal drilling, the tool suits workshop technicians, toolmakers and maintenance personnel who require fine-diameter holes with reliable centring. The short length reduces flex and is particularly advantageous when drilling up to moderate depths in tough materials, where stability and repeatability are key requirements for production or repair tasks. We recommend the MetavCUT Twist Drill (Type N) for any workshop needing a robust, short HSS solution for precise metal drilling — for personalised advice or additional technical details contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Specifications Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40017-FDA Typ: Type N Durchmesser: 1.7 mm Spitzenwinkel: 118° Gesamtlänge: 43 mm Spirallänge: 20 mm Ausführung: short Material: HSS Norm: DIN 338 Farbe: black Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT Type N used for? The Twist Drill from MetavCUT (Type N) is primarily used for drilling high-strength materials and larger diameters in metalworking; its shape makes it easy to resharpen and able to withstand higher loads, which is why it is commonly chosen for demanding applications. Which three drill types exist? The three main drill types are Metal drills, Wood drills and Stone/Concrete drills, and the MetavCUT Twist Drill (Type N) belongs to the category of metal drills optimised for steel and similar materials.
1.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Type N) — short, Ø 1.7 mm, 118°, 5% Cobalt-Alloyed, HSS‑E, DIN 338 — fully ground shank — MetavCUT The Twist Drill (Type N) is a short HSS‑E metalworking drill designed for Drilling Machines, offering enhanced stability and precision for demanding metal‑drilling tasks. Short design for improved stability 5% Cobalt‑alloyed HSS‑E for increased heat resistance DIN 338 compliant for short twist drills Fully ground shank for high concentricity 118° point angle for easier centring in softer metals Short length for maximum stability and precise holes Thanks to its short design, this Twist Drill minimises overhang from the chuck, which significantly reduces bending and vibration during cutting. As a result, the tool achieves better concentricity and an improved surface finish in drilled holes. This makes the drill especially suitable for workshop situations where repeatable, accurate hole geometry is essential, for example in jigs, fixtures and precision metal components. Alloyed HSS‑E chemistry delivers longer tool life under heat Manufactured from HSS‑E with 5% cobalt alloy, the drill combines toughness with superior red‑hardness compared to standard HSS. This material composition increases resistance to softening at elevated cutting temperatures, allowing for higher cutting speeds and extended tool life when machining steels and other metals. The cobalt content also supports easier regrinding, so maintenance and tool refurbishment remain cost‑effective. Geometry and finish optimised for metalworking performance The 118° point angle provides a compromise between entry sharpness and robustness and aids centring on slightly irregular surfaces; it is particularly helpful when working with softer non‑ferrous metals. The fully ground flute and shank geometry ensure sharp cutting edges and high run‑out accuracy, producing clean holes and reducing burr formation. Conforming to DIN 338, this short twist drill is engineered for consistent quality across batches. Intended applications and target users Engineered for Drilling Machines and manual drill presses, this Twist Drill is tailored to professional workshops, toolrooms and maintenance departments that require reliable metal drilling. Typical applications include machining of alloyed and unalloyed steel, cast iron, non‑ferrous metals and technical plastics. The combination of HSS‑E material and short design supports both stationary machine use and demanding hand‑held operations where rigidity and precision are required. Strong recommendation: For precision metalworking choose the MetavCUT Twist Drill Type N with HSS‑E 5% cobalt alloy — for technical questions or tailored advice METAV Werkzeuge provides expert support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47017-FDA Diameter: 1.7 mm Overall Length: 43 mm Spiral Length: 20 mm Point Angle: 118° Type: Type N Execution: short Material: HSS‑E Alloy/Coating: 5% cobalt‑alloyed Shank Execution: fully ground For: Drilling Machine Application: Drills for metal Model Series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is suitable for alloyed and unalloyed steels, cast iron, non‑ferrous metals and various plastics; its HSS‑E chemistry with 5% cobalt improves performance on harder or heat‑sensitive cuts and supports higher cutting speeds while maintaining tool life. What is a Twist Drill mainly used for? A Twist Drill such as the MetavCUT Type N is mainly applied when machining high‑strength materials and larger drill diameters; its design is comparatively easy to regrind and can withstand greater mechanical loads, making it a reliable choice for demanding metalworking operations. Which three drill types are there? Common drill types are: Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for machining metallic materials.
1.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 1.8 mm, 118°, Short HSS, Black, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS metal-drilling bit designed for precise, stable holes in steel and non‑ferrous metals using drilling machines and hand drills. Short design for high stability and precision HSS material for wear-resistant metal drilling 118° tip for improved centring on curved surfaces DIN 338 compliant for standardised quality Suitable for Drilling Machines and Hand Drills Faster, more reliable results thanks to short HSS construction The Twist Drill features a Short overall profile with a Spiral Length of 22 mm and an Overall Length of 46 mm, which reduces overhang and dramatically improves stability during drilling. Made from HSS (High Speed Steel), the bit combines elasticity with wear resistance; this manufacturing method lowers breakage risk for holes below 6 mm and keeps the cutting edge durable under standard metalworking loads. As a result, operators achieve cleaner holes with less vibration and better tool life. Precise centring and controlled penetration for metalworking A 118° Tip Angle gives this Type N geometry reliable centring on slightly curved or irregular surfaces and reduces the tendency to wander at startup. While larger tip angles are used for very hard materials, the 118° geometry is effective for many steels, cast iron and non‑ferrous metals, balancing entry sharpness and cutting life. The normal spiral flute design evacuates chips efficiently, supporting steady feed rates and consistent hole quality. Optimised for workshop use and maintenance tasks Engineers, maintenance technicians and hobbyists benefit from the Type N design: a classic metal‑drilling profile that excels in routine shop and site tasks. Compatibility with standard Drilling Machines and common chucks ensures easy integration into existing toolsets. The compact length makes the bit particularly useful when access is limited or when rigidity is paramount, for instance when drilling in fixtures, jigs or on portable workpieces. Conformity, resharpening and practical handling Conforming to DIN 338, this short Twist Drill follows standardised dimensions and tolerances, making replacement and inventory straightforward. The short geometry also simplifies resharpening: the flute and point shape are easy to regrind while maintaining the original cutting geometry. For best results, clamp the bit securely, use appropriate cutting fluid for ferrous metals and avoid excessive feed to prevent overheating. Proper storage and occasional light resharpening extend service life and maintain hole accuracy. Highly recommended: Choose MetavCUT’s Twist Drill Type N for precise, stable metal drilling — for personalised technical advice METAV Werkzeuge is pleased to assist you at info@metav-werkzeuge.com, Tel +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40018-FDA Type: Type N Diameter: 1.8 mm Tip angle: 118° Material: HSS Overall length: 46 mm Spiral length: 22 mm Execution: Short Standard: DIN 338 Colour: Black Application: Drills for metal Suitable for: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The Twist Drill from MetavCUT, Type N, is primarily used for machining high‑strength materials and larger drill diameters in metalworking. Its shape allows for straightforward resharpening and it endures higher loads, making it suitable for through‑holes and robust workshop applications. Which three drill types are there? Common drill categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the Twist Drill (MetavCUT, Type N) belongs to the Metal Drill group and is optimised for steel and similar materials.
1.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Short Type N Twist Drill, 1.8 mm, 118° Tip, 5% Cobalt‑Alloyed, HSS‑E, DIN 338, Fully Ground Shank by MetavCUT The Twist Drill short Type N is a precision metalworking drill bit designed for use in hand Drilling Machines and stationary equipment for reliable, clean holes in a wide range of metals. Short design reduces deflection and improves precision 5% Cobalt‑alloyed HSS‑E for higher heat resistance 118° Tip for clean entry in softer metals Fully ground shank for high runout accuracy Conforms to DIN 338 for standardized dimensions Greater stability and wear resistance for demanding metalwork The short design of this Twist Drill minimises overhang and therefore reduces the risk of bending during operation, resulting in higher precision in every hole. Manufactured from HSS‑E with 5% cobalt, the bit offers improved heat resistance and longer life when drilling alloys and harder steels. As a Type N Normal Spiral it is particularly well suited to metal applications and follows the dimensional and production guidelines of DIN 338 for consistent performance. Built for accurate alignment and clean hole starts A fully ground shank ensures excellent concentricity and low runout in both hand and bench Drilling Machines, improving hole quality and tool life. The 118° tip angle facilitates a clean entry, especially in softer materials such as aluminium, while the short overall geometry (Total Length 46 mm, Spiral Length 22 mm) increases stiffness. This combination yields precise centring and a controlled cutting action that benefits workshop professionals and maintenance technicians alike. Practical advantages, recommended uses and handling This Twist Drill is ideal for professional metalworkers, maintenance crews and precision hobbyists who need reliable results in alloys, Cast Iron, non‑ferrous metals and plastics. The roll‑or‑grind manufacturing choices mean the ground version delivers sharper cutting edges and better roundness, though it benefits from appropriate cooling to reduce the risk of breakage. For drilling below 6 mm diameter, the low‑temperature treatment used in production increases elasticity and reduces fracture risk, making the bit a smart choice for repeated, precise metal drilling tasks. MetavCUT’s short Twist Drill is recommended for precision metal drilling — for expert technical advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill (Short Type N) Brand: MetavCUT SKU: 47018-FDA Diameter: 1.8 mm Tip Angle: 118° Material: HSS‑E (High Speed Steel, Cobalt alloyed) Alloy/Coating: 5% cobalt‑alloyed Type: Type N (Normal Spiral) Execution: Short Overall Length: 46 mm Spiral Length: 22 mm Shank Finish: Fully ground Application: Drills for metal / suitable for Hand Drilling Machine and stationary machines Standard/Norm: DIN 338 Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill (Type N) is mainly applied to machining high‑strength materials and larger drill diameters; its design is easy to regrind and endures higher loads, which makes it suitable for demanding metalworking tasks. Which three drill types exist? The common drill categories are Metal drill, Wood drill and Stone/Concrete drill, with the MetavCUT Twist Drill belonging to the Metal drill category appropriate for ferrous and non‑ferrous metals.
1.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Kombinieren Sie die hohe Stabilität durch die kurze Ausführung mit der Verschleißfestigkeit des HSS-Materials und dem präzisen Spitzenwinkel 118° für saubere Metallbohrungen. Bestellen Sie den Spiralbohrer von MetavCUT direkt über Metav Werkzeuge oder nutzen Sie unsere technische Beratung bei Bedarf. Spiralbohrer – HSS kurz, Typ N von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Metallbohrer nach DIN 338, entwickelt für präzise Bohrungen in legierten und unlegierten Stählen sowie in Nichteisenmetallen. Kurze Ausführung für erhöhte Stabilität Rollgewalztes HSS für geringeres Bruchrisiko Spitzenwinkel 118° für einfaches Anbohren Geeignet für präzise Metallbearbeitung Zylinderschaft kompatibel mit Handbohrmaschine Präzision und Stabilität bei feinen Metallbohrungen Die kurze Bauart reduziert die Auskraglänge und minimiert das Verbiegen bei feinen Bohrungen. Durch die geringere Hebelwirkung bleibt die Bohrung stabil und das Bohrbild sauber, was insbesondere bei Durchmessern im Mikro-Bereich entscheidend ist. Das Resultat sind exakte Bohrungen mit reduziertem Nacharbeitaufwand und konstanter Lochqualität. HSS-Material: Warum Schnellarbeitsstahl für kleine Bohrdurchmesser wichtig ist Das verwendete HSS (Schnellarbeitsstahl) ist rollgewalzt gefertigt und bietet Elastizität sowie erhöhte Zähigkeit. Bei Durchmessern unter 6 mm verringert sich dadurch das Bruchrisiko gegenüber geschliffenen Ausführungen. Kunden profitieren von einer längeren Standzeit und zuverlässigen Ergebnissen beim Bohren in Stahl, Gusseisen und Kunststoffen. Praktische Anwendung und Hinweise für sicheres Arbeiten Für feine Bohrungen empfiehlt sich ein zentriertes Anpunkten vor dem Bohren und eine ruhige, gleichmäßige Vorschubgeschwindigkeit. Bei Handbohrmaschine ist eine stabile Führung und niedriger Vorschub wichtig, um Verkantung zu vermeiden. Kühlung und Spanabfuhr verbessern die Standzeit bei längeren Einsätzen; bei sehr filigranen Arbeiten ist eine stationäre Aufnahme vorteilhaft. Für wen dieser Bohrer besonders geeignet ist Der Bohrer richtet sich an Anwender, die präzise Metallbearbeitung verlangen: Feinmechanik, Prototypenbau, Modellbau und Werkstätten mit hohen Qualitätsanforderungen. Die Kombination aus DIN 338-Konformität, Typ N-Spiralgeometrie und der kurzen Ausführung macht das Werkzeug zur verlässlichen Wahl für detailorientierte Bearbeitungen. Mit dem HSS-Spiralbohrer von MetavCUT setzen Sie auf Präzision und Stabilität – bei Fragen erreicht Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 40019-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Material: HSS Norm: DIN 338 Typ: Typ N Farbe: schwarz Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Fakten Durchmesser: 1,9 mm Gesamtlänge: 46 mm Spirallänge: 22 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten DIN 338: Norm für kurze Spiralbohrer HSS: Schnellarbeitsstahl, erhöht Zähigkeit und Standzeit Typ N: Normalspirale, klassisch für Metall Zylinderschaft: kompatibel mit Standardspannfuttern FAQ Für welche Materialien ist der Bohrer geeignet? Der Spiralbohrer von MetavCUT (Typ N, SKU 40019-FDA) eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; bei harten Werkstoffen empfiehlt sich angepasste Schnittgeschwindigkeit und Kühlung. Ist die kurze Ausführung für Handbohrmaschinen geeignet? Die kurze Ausführung verbessert die Stabilität; bei Einsatz mit Handbohrmaschine ist auf exakte Führung, ruhigen Vorschub und Anpunkten zu achten, um Verkantung zu vermeiden. Welchen Spitzenwinkel hat der Bohrer und was bedeutet das praktisch? Der Bohrer hat einen Spitzenwinkel von 118°, was das Anbohren erleichtert und sich besonders bei weicheren Metallen und dünnen Blechen bewährt. Wie viele Bohrer sind in einer Verpackungseinheit? Die Verpackungseinheit umfasst 10 Stück, geliefert vom Hersteller MetavCUT; die SKU lautet 40019-FDA.
1.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 1.9 mm, 118°, 5% cobalt-alloyed, short, HSS‑E, DIN 338 The Twist Drill Type N is a short HSS‑E metal drilling bit designed for precise work in steels and non‑ferrous metals with a 118° point angle for controlled penetration. Short design for high stability and accuracy 5% cobalt‑alloyed HSS‑E for extended life Fully ground shaft for superior concentricity Conforms to DIN 338 for short twist drills Ideal for Drilling Machine applications Durable alloy and longer lifetime for metalworking The short HSS‑E cutting tool combines a 5% cobalt‑alloyed composition with a roll‑formed and ground geometry to deliver increased heat resistance and wear life when machining Steel and Cast Iron. Because the metal matrix contains additional cobalt, the bit retains hardness at elevated Temperatures, which reduces flank wear during extended Drilling operations. This construction translates into fewer tool changes and more consistent hole quality for workshop and production environments. Short length for superior stability and precise holes A reduced overall length means less overhang from the chuck and therefore significantly improved Stability and concentricity under load. The shorter cantilever minimizes vibration and the risk of deviation, so each hole is truer and cleaner. For applications where accuracy matters—jigs, fixture work and thin‑section components—the compact format ensures safer handling and lower breakage risk compared with longer equivalents. Geometry tuned for metal and controlled entry The 118° point angle and classic Type N spiral make this Short Twist Drill particularly suitable for general Metalworking, enabling controlled entry and good centring on flat surfaces. The fully ground flute geometry produces sharp cutting lips and a precise chisel edge, yielding clean holes with reduced burr. For tasks in alloyed and unalloyed Steel, non‑ferrous Metals and Plastics, this design balances penetration and tool life. Practical handling and maintenance advice To maximise service life, use moderated cutting speeds and adequate coolant when drilling hard or heat‑sensitive Materials. The fully ground shaft offers excellent run‑out characteristics in collets and chucks, but requires proper clamping to avoid slippage. When resharpening is necessary, observe the original point angle and maintain flute geometry to preserve Performance. For bench and machine use, the shorter length reduces bending stresses and simplifies chip evacuation. Choose the MetavCUT short Twist Drill for demanding metal applications — METAV Werkzeuge provides expert advice and technical support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 and WhatsApp: +49 170 2837271 Designation: Twist Drill (Short) Brand: MetavCUT SKU: 47019-FDA Diameter: 1.9 mm Total length: 46 mm Spiral length: 22 mm Point angle: 118° Type: Type N Execution: short Colour: 5% cobalt-alloyed Shaft finish: fully ground Material: HSS-E Standard: DIN 338 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of this Twist Drill from MetavCUT Type N? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters in Metalworking. Its short design improves stability and precision, and the 5% cobalt content helps the bit withstand higher Temperatures and mechanical stress during demanding drilling tasks. Which three drill types are commonly distinguished? Common drill categories are Metal drill (such as the MetavCUT Twist Drill Type N), Wood drill, and Stone/Concrete drill. Each is optimised for its material class and must be selected according to the workpiece to ensure proper hole quality and tool life. Why are Twist Drills sharpened at the tip? Sharpening the tip reduces the cross‑cutting edge area at the Twist Drill point, lowering friction. By reducing Reibkräfte, less thrust is required during drilling and the bit centres more reliably in the workpiece. Can a metal drill be used to drill wood? A Metal drill like the MetavCUT Twist Drill can be used in Wood, but guidance and surface finish are generally inferior compared with dedicated Wood drills. Metal drills are easier to resharpen and tend to produce less self‑feed, so careful feed control is recommended.
1.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Metal Drill, 1.9 mm, 118° Tip, Type N, Bright Finished, Short Execution, DIN 338 The Twist Drill is a short HSS‑G Type N metal drill designed for precise drilling in metal on a Drilling Machine and suitable for demanding workshop and industrial applications. Short HSS‑G design for higher stability 1.9 mm diameter for fine, precise holes 118° tip angle for reliable centering in metals Fully ground shank for high concentricity Conforms to DIN 338 for short twist drills Durable Material for Consistent Results and Longer Tool Life Made from HSS‑G, this short Twist Drill delivers high hardness and sharp cutting edges that produce clean holes in Metal. The ground flute geometry ensures excellent chip evacuation and reduces friction, which benefits tool life. Because the drill is manufactured with a CNC grinding process rather than roll forming, users gain high Rundlaufgenauigkeit and precise hole quality, especially important when working with alloys or cast materials. Short Design That Improves Stability and Precision at the Cut A shorter overall length reduces overhang and increases stability during drilling, which decreases the tendency to wander or bend under load. The short execution is particularly advantageous when drilling in hard Materials such as Steel, Cast Iron and Tempered Alloys, providing better concentricity and less vibration. This design therefore enables more consistent hole diameters and improved surface finish even under higher cutting forces. Geometry and Cutting Behaviour Optimised for Metalworking The 118° tip angle and Type N spiral geometry represent the classic metalworking configuration, supporting good centering and controlled chip formation. The sharpened tip reduces quench forces at initial contact and helps avoid skidding on curved surfaces. The fully ground shank and flute profile facilitate accurate clamping and runout behaviour, which is essential for demanding assembly or precision manufacturing tasks. Who Benefits and How to Use This Tool Effectively Designed for machinists and metalworkers, the Profi Line Twist Drill from MetavCUT is ideal for tasks requiring fine diameters and repeatable accuracy. Use on fixed or portable Drilling Machines with appropriate coolant for long tool life; the shorter geometry suits tight setups or jig work. For less experienced users, coolant and moderate spindle speeds are recommended to reduce heat and prolong cutting edge life. Highly recommended: choose the MetavCUT Profi Line Twist Drill for precision metal drilling and contact METAV Werkzeuge for expert advice and technical support — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical information Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 48019-FDA Diameter: 1.9 mm Tip angle: 118° Type: Type N (Normal Spiral) Colour: Bright finished Execution: Short Material: HSS-G (Ground) Standard: DIN 338 Overall length: 49 mm Spiral length: 24 mm Shank finish: Fully ground Suitable for: Drilling Machine / Hand Drills for Metal applications Series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Twist Drill be used in a hand drill as well as a drilling machine? The MetavCUT Twist Drill (Type N, HSS‑G) is primarily optimised for use on a Drilling Machine to ensure low runout and consistent cooling, but it can also be used in a Hand Drill if the chuck provides secure clamping and the correct speeds and coolant are applied to avoid overheating. Is the MetavCUT Twist Drill suitable for drilling alloyed steels? Yes, the MetavCUT Twist Drill from the Profi Line is suitable for alloyed and unalloyed Steel, Cast Iron and other Metals; its ground HSS‑G geometry gives sharp cutting edges that perform well in such Materials when used with appropriate feeds and coolant. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength Materials and larger hole diameters; this form is easy to regrind and withstands higher loads, making it suitable for demanding applications in Metalworking. Which three drill types exist? The main drill types are Metal Drills, Wood Drills and Masonry/Concrete Drills.
10,2mm Spiralbohrer, geschliffen, HSS‑G, 135° Spitzenwinkel, reduziert 10mm Schaft - MetavCUT
Der geschliffene Spiralbohrer verbindet höchste Präzision durch HSS-G Geometrie, einen reduzierten Schaft 10 mm für flexible Spannbarkeit und den 135° Spitzenwinkel für harte Werkstoffe; so erzielen Sie schnelleres Bohren und geringeren Anpressdruck bei Metallbearbeitung. Bestellen Sie den Spiralbohrer 10,2 mm von MetavCUT direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 10,2 mm — MetavCUT Standard Line Der Spiralbohrer 10,2 mm ist ein geschliffener HSS-G Bohrer zur präzisen Metallbearbeitung auf stationären Werkzeugmaschinen 10,2 mm präziser Spiralbohrer HSS-G geschliffen für Metallbearbeitung Reduzierter Schaft 10 mm für kleine Bohrfutter Spitzenwinkel 135° für harte Werkstoffe DIN 338 kurze Spiralbohrer Norm Höchste Präzision dank geschliffener HSS-G Geometrie Die geschliffene HSS-G Oberfläche sorgt für sehr scharfe Schneiden und ausgezeichnete Rundlaufgenauigkeit, was besonders bei Metallbohrungen messbare Vorteile bringt. Durch den CNC-Schliff entstehen saubere Bohrlöcher mit reduziertem Ausriss, sodass nachfolgende Arbeitsschritte einfacher und schneller ausfallen. Diese Verarbeitung macht den Bohrer ideal für legierten und unlegierten Stahl sowie Gusseisen. Effizienzsteigerung und Bedienkomfort bei Bohrvorgängen Die Konstruktion reduziert die notwendige Anpresskraft und erhöht die Vorschubgeschwindigkeit, sodass der Arbeitszyklus effizienter wird. Der Spiralbohrer 10,2 mm ermöglicht ein bis zu 40 % schnelleres Bohren und benötigt dabei deutlich weniger Kraftaufwand als herkömmliche HSS-Ausführungen. Weniger Kraftbedarf bedeutet weniger Belastung für Maschine und Bediener sowie geringeren Verschleiß der Spannmittel. Praktische Hinweise zur Anwendung und Werkstoffeignung Mit dem 135° Spitzenwinkel dringt der Bohrer zügig in harte Werkstoffe ein und eignet sich daher besonders für Edelstahl und tempergehärtete Materialien. Die Spirallänge von 87 mm ermöglicht kontrollierte Späneabfuhr bei mittleren Bochtiefen; bei sehr tiefen Löchern empfiehlt sich stufenweises Aufbohren. Für stationäre Bohrmaschinen und den Einsatz mit Kühlschmierstoff wird die beste Standzeit erreicht. Passgenauigkeit und Einsatzszenarien in der Werkstatt Der reduzierte Schaft 10 mm erlaubt das Spannen größerer Bohrdurchmesser in Bohrfuttern mit begrenzter Spannweite und erhöht so die Flexibilität in der Werkstatt. Dieses Werkzeug richtet sich an Metallbearbeiter, Instandhalter und industrielle Anwender, die auf zuverlässige Normware nach DIN 338 setzen. Durch die robuste Ausführung eignet sich der Bohrer vor allem für stationäre Maschinen in Serien- und Einzelteilfertigung. Empfehlung: Den geschliffenen HSS-G Spiralbohrer von MetavCUT in 10,2 mm direkt bei Metav Werkzeuge anfragen — per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 63102-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Daten Durchmesser: 10,2 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 1 Besonderheiten Ausführung: geschliffen Material: HSS-G (geschliffener Schnellarbeitsstahl) Schaftausführung: reduziert 10 mm Farbe: silber Anwendung: Bohrer für Metall Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) FAQ Ist der Spiralbohrer für Handgeführte Akkubohrschrauber geeignet? Der geschliffene Spiralbohrer 10,2 mm von MetavCUT ist primär für stationäre Maschinen konzipiert; aufgrund der feineren Schneide kann er bei Handmaschinen schneller brechen, daher wird der Einsatz an stationären Bohrmaschinen empfohlen. Welche Werkstoffe lassen sich mit diesem Bohrer bearbeiten? Der HSS-G Spiralbohrer eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff. Warum ist der Spitzenwinkel 135° wichtig? Der 135° Spitzenwinkel reduziert das Anlaufen beim Anbohren in harte Werkstoffe und verbessert die Zentrierung, wodurch der Bohrer leichter in Edelstahl und gehärteten Materialien arbeitet. Was bedeutet „reduzierter Schaft 10 mm“ und wozu ist das gut? Ein reduzierter Schaft 10 mm bedeutet, dass der hintere Schaft auf 10 mm abgedreht ist, um größere Bohrdurchmesser in Bohrfuttern mit begrenzter Spannweite verwenden zu können; das erhöht die Kompatibilität mit kleineren Spannfuttern. Entspricht der Bohrer einer Norm und was heißt das für die Auswahl? Ja, der Bohrer entspricht DIN 338, was die Abmessungen und Toleranzen für kurze Spiralbohrer mit Zylinderschaft festlegt; das erleichtert die Auswahl passender Ersatzwerkzeuge und Spannmittel. Enthält die Verpackung nur einen Bohrer? Die Verpackungseinheit beträgt 1, somit wird der Spiralbohrer 10,2 mm einzeln geliefert und ist unter der Artikelnummer 63102-FDA gelistet.
10,5mm Rollgewalzter Spiralbohrer, HSS, 118° Spitzenwinkel, reduziert 10mm Schaft, schwarz - MetavCUT
Spiralbohrer MetavCUT Standard Line (Typ N, HSS) Der Spiralbohrer wurde für das präzise Durchbohren von Metall an stationären und handgeführten Maschinen konzipiert und bietet eine ausgewogene Kombination aus Bruchsicherheit und Wirtschaftlichkeit. MetavCUT Standard Line Spiralbohrer Typ N Rollgewalzte HSS-Ausführung für brucharme Einsätze Reduzierter Schaft 10 mm für kleinere Bohrfutter DIN 338 konform für kurze Spiralbohrer Spitzenwinkel 118° für sichere Zentrierung Zuverlässige Leistung für den Werkstattalltag Der Kurzspiralbohrer aus der Standard Line verbindet HSS-Härte mit der zähen Eigenschaft der rollgewalzten Fertigung. Das Ergebnis ist ein Bohrer, der beim Durchbohren von legiertem und unlegiertem Stahl, Gusseisen sowie Nichteisenmetallen weniger zum Sprödbruch neigt. Anwender profitieren von reduzierten Maschinenstillständen und geringeren Nachbestellungen, weil Bruchausfälle seltener auftreten. Gleichzeitig bleibt die Fertigungskostenvorteile erhalten, sodass ein gutes Kosten-Nutzen-Verhältnis erreicht wird. Herstellverfahren erklärt und Praxisvorteile Beim rollgewalzten Verfahren wird der Rundstab erhitzt und in Spiralform gewalzt, statt aus dem Vollen geschliffen zu werden. Dadurch entsteht eine höhere Elastizität des Werkstoffs, was insbesondere bei Durchmessern unter 6 mm das Bruchrisiko senkt; bei 10,5 mm führt das Verfahren zu robuster Standzeit für den Alltagsgebrauch. Die DIN 338 normiert diese kurzen Spiralbohrer mit Zylinderschaft und stellt sicher, dass Abmessungen und Aufnahme kompatibel zu gängigen Bohrfuttern sind. Für Anwender bedeutet das: zuverlässige Einsetzbarkeit bei Standardbohrungen in Metall ohne teure Spezialwerkzeuge. Einsatzbereiche, Zielgruppe und Anwendungsszenarien Dieser Bohrer ist ausgelegt für Werkstätten, Montagebetriebe, Instandhaltung und ambitionierte Heimwerker, die regelmäßig Metall bearbeiten. In der Praxis eignet sich das Werkzeug für das Bohren in Blechen, Profilen und flachen Stahlkomponenten sowie in Aluminium und Kunststoffen. Aufgrund des reduziert 10mm Schaftes passt der Bohrer auch in Bohrfutter, die nur bis 10 mm spannen, was die Flexibilität auf der Werkbank erhöht. Wer robuste, kosteneffiziente Bohrungen ohne übermäßige Präzisionsanforderungen benötigt, findet hier eine pragmatische Lösung. Sichere Anwendung und Materialhinweise Für saubere Ergebnisse empfiehlt sich vor dem Bohren ein Anpunkten mit einem Zentrierbohrer, besonders bei höheren Oberflächenrauheiten. Bei legierten Stählen erhöht eine leichte Kühlschmierstoffzufuhr die Standzeit. Der Spitzenwinkel 118° unterstützt das schnelle Eindringen und die einfache Zentrierung auf ebenen Flächen; für sehr weiche Materialien oder gewölbte Oberflächen kann ein anderer Winkel vorteilhaft sein. Der Bohrer ist nicht für extrem hohe Präzision in Feinpassungen ausgelegt, dort sind geschliffene Werkzeuge sinnvoller. Mit dem Spiralbohrer von MetavCUT Standard Line empfehlen wir den Einsatz für wirtschaftliche Metallbohrungen; Bestell- und Beratungsanfragen gerne an info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 und WhatsApp +49 170 2837271. Produkteigenschaften Artikelnummer: 61105-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 338 Fakten Durchmesser: 10,5 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Ausführung: rollgewalzt Material: HSS Farbe: schwarz Schaftausführung: reduziert 10mm Typ: Typ N FAQ Ist dieser Bohrer für gehärteten Stahl geeignet? Der MetavCUT Spiralbohrer Standard Line (Typ N, SKU 61105-FDA) ist primär für legierte und unlegierte Stähle sowie Gusseisen und Nichteisenmetalle ausgelegt; für sehr harte, gehärtete Stähle sind spezialisierte Vollhartmetallwerkzeuge empfehlenswert. Kann der Bohrer in einem Akkubohrschrauber verwendet werden? Ja, der Spiralbohrer MetavCUT Standard Line lässt sich bei typischen Heimwerker- und Werkstattakkuschraubern einsetzen, insbesondere dank des reduziert 10mm Schaftes, der auch in begrenzte Bohrfutter passt. Wie beeinflusst die rollgewalzte Fertigung die Standzeit? Die rollgewalzte Ausführung erhöht die Zähigkeit des HSS-Materials, wodurch der Bohrer tendenziell bruchsicherer ist und im Alltagsgebrauch eine stabile Standzeit bietet; extreme Präzisionsanforderungen können jedoch besser von geschliffenen Bohrern erfüllt werden. Welchen Spitzenwinkel hat der Bohrer und was bedeutet das? Der Bohrer verfügt über einen Spitzenwinkel von 118°, was eine gute Zentrierfähigkeit und Eindringwirkung bei metallischen Werkstoffen gewährleistet und das Anbohren besonders auf ebenen Flächen erleichtert. Entspricht der Bohrer einer Norm und was sagt das aus? Ja, der Spiralbohrer MetavCUT Standard Line erfüllt die DIN 338, die kurze Spiralbohrer mit Zylinderschaft klassifiziert und damit Kompatibilität und Standardabmessungen für den Einsatz an gängigen Maschinen sicherstellt.
10,5mm Spiralbohrer, 118° Spitzenwinkel, HSS, rollgewalzt, Morsekegel, 87mm Spiralänge - MetavCUT
Kombinieren Sie die Wirtschaftlichkeit des rollgewalzten Herstellverfahrens mit der Widerstandsfähigkeit von HSS und der sicheren Spannaufnahme durch den Morsekegel für zuverlässige Metallbohrungen; bestellen Sie den Spiralbohrer direkt über Metav oder kontaktieren Sie unsere Beratung bei technischen Fragen. Spiralbohrer von MetavCUT – HSS, Morsekegel Der Spiralbohrer von MetavCUT ist ein rollgewalzter HSS-Bohrer für präzise Metallbohrungen in Werkstatt und Industrie. HSS-Material für hohe Zähigkeit und Standzeit Morsekegelschaft für sichere Aufnahme in Säulenbohrmaschinen Rollgewalzte Fertigung reduziert Bruchrisiko bei kleinen Durchmessern DIN 345 Norm für universelle Einsetzbarkeit Spirallänge 87 mm für sauberen Spantransport Höhere Zähigkeit durch rollgewalzte Fertigung Die rollgewalzte Herstellungsweise macht den Bohrer besonders zäh und bruchsicher, ohne die Wirtschaftlichkeit zu opfern. Durch das Walzen entsteht eine elastischere Spanstruktur, die vor allem bei kleineren Bohrdurchmessern das Bruchrisiko vermindert. Für Anwender bedeutet das weniger Ausschuss und längere Betriebsintervalle, wenn HSS-Werkzeuge in wechselnden Metallwerkstoffen eingesetzt werden. Passende Maschinen und typische Anwendungen Dieser Bohrer gehört in den Standard-Bereich und eignet sich für allgemeine Werkstattaufgaben sowie stationäre Bohrungen in Stahl, Gusseisen und Nichteisenmetallen. Die Morsekegelschaft macht ihn ideal für Säulenbohrmaschinen, Drehmaschinen mit MK-Aufnahme und industrielle Ständerbohrmaschinen, bei denen ein sicherer Sitz und hohe Drehmomentübertragung gefordert sind. Dadurch werden präzise Bohrbilder und reproduzierbare Ergebnisse ermöglicht. Einfaches Handling und praktische Vorteile Der Spitzenwinkel von 118° sorgt für leichtes Eindringen in weichere Werkstoffe und erleichtert das Zentrieren auf gewölbten Oberflächen. Die Spirallänge 87 mm unterstützt den effektiven Spantransport, was besonders bei tiefen oder längeren Bohrungen die Standzeit erhöht. Insgesamt reduziert sich der Arbeitsaufwand, weil Nacharbeiten seltener nötig sind und die Bohrung zügig erstellt werden kann. Materialempfehlungen und Einsatzbedingungen Der Bohrer ist für legierten und unlegierten Stahl, Grauguss, Temperguss, Sphäroguss sowie Neusilber und Kunststoffe ausgelegt. Bei Anwendungen in zähen Werkstoffen empfiehlt sich eine angepasste Kühlung und das Vorbohren nach den üblichen Richtlinien. Mit DIN 345 als Normreferenz sind Ersatzteile und Maschinenschnittstellen leicht identifizierbar, was die Integration in bestehende Arbeitsprozesse vereinfacht. Wählen Sie den MetavCUT Standard Line Spiralbohrer mit Morsekegelschaft für robuste und wirtschaftliche Metallbohrungen; bei offenen Fragen erreichen Sie unsere Techniker per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 54105-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 10,5 mm Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Verpackungseinheit: 1 Besonderheiten Material: HSS Schaft: Morsekegel Norm: DIN 345 Farbe: Schwarz Ausführung: rollgewalzt Anwendung: Bohrer für Metall FAQ Für welche Maschinen ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer mit Morsekegelschaft (SKU 54105-FDA) ist primär für Säulenbohrmaschinen und Drehmaschinen mit MK-Aufnahme konzipiert, wodurch ein sicherer Sitz und hohe Drehmomentübertragung gewährleistet sind. Eignet sich der Bohrer für Baustahl und Gusseisen? Ja, der HSS Spiralbohrer aus der Standard Line von MetavCUT (54105-FDA) ist für Baustahl, Gusseisen und weitere Nichteisenmetalle ausgelegt und arbeitet zuverlässig bis etwa 900 N/mm² Zugfestigkeit. Wie wirkt sich die rollgewalzte Fertigung auf die Anwendung aus? Die rollgewalzte Ausführung macht den Spiralbohrer robuster gegenüber Bruch und wirtschaftlicher in der Fertigung; das reduziert Ausfälle bei Standardbohrungen und verlängert die Nutzungsdauer im Werkstattalltag. Welchen Spitzenwinkel hat der Bohrer und was bedeutet das praktisch? Der Bohrer hat einen Spitzenwinkel von 118°; das erleichtert das Zentrieren in weicheren Werkstoffen wie Aluminium und reduziert das Wandern beim Anbohren. Warum sollte ich den Bohrer von MetavCUT wählen? MetavCUT kombiniert HSS-Materialqualität mit standardisiertem Design und der Verlässlichkeit von Metav als Anbieter; die SKU 54105-FDA steht für einen universellen, wirtschaftlichen Bohrer für den professionellen Einsatz.
10,5mm Spiralbohrer, 135° Spitze, HSS‑G geschliffen, reduziert 10mm Schaft, 87mm Spirallänge, DIN 338 - MetavCUT
Kombination aus HSS-G und geschliffener Ausführung liefert präzise Bohrlöcher bei hoher Standzeit; der reduzierte Schaft 10mm erlaubt die Nutzung in Bohrfuttern mit begrenzter Spannweite. Profitieren Sie von schnellerem Vorschub und reduziertem Kraftaufwand bei der Metallbearbeitung und kontaktieren Sie bei Bedarf die Metav-Beratung für technische Details. Spiralbohrer»MetavCUT Standard Line« (63105-FDA) Spiralbohrer»MetavCUT Standard Line« für präzise Metallbohrungen in Werkstatt und Industrie, geschliffen und ausgelegt für legierte und unlegierte Stähle sowie Nichteisenwerkstoffe HSS-G geschliffen für hohe Schärfe DIN 338 Konformität für kurze Spiralbohrer Reduzierter Schaft 10 mm passt in kleine Bohrfutter Spitzenwinkel 135° für härtere Werkstoffe Spirallänge 87 mm für sicheres Spanabführen Schnelleres Bohren bei geringer Anpresskraft Der geschliffene HSS-G-Schliff sorgt für sehr scharfe Schneiden und ermöglicht bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Bohrern. Für Anwender bedeutet das weniger Ermüdung bei längerem Arbeiten und kürzere Taktzeiten in der Werkstatt. Bei harten Werkstoffen empfiehlt sich Kühlung, um Standzeit und Bohrbild zu optimieren. Präzision und Rundlaufgenauigkeit für saubere Bohrbilder Dank der DIN 338-Konformität und des geschliffenen Werkzeugs überzeugt der Bohrer mit sauberem Bohrbild und hoher Rundlaufgenauigkeit. Der reduzierte Schaft 10mm erleichtert die Einspannung in Bohrfutter mit begrenzter Backenöffnung, ohne Kompromisse bei der Stabilität in stationären Maschinen einzugehen. Für hochpräzise Passungen sollte vorgepunzt oder zentriert werden. Vielseitiger Einsatz in Werkstatt und Produktion Mit einem Durchmesser von 10,5 mm liegt das Werkzeug im Standard-Bereich für allgemeine Werkstattanwendungen. Es eignet sich für Dünn- bis Mittelstarke Bleche, Profile, Guss- und Sintermaterialien sowie Temperguss. Für Handgeführte Maschinen empfiehlt sich eine kontrollierte Vorschubgeschwindigkeit; für langlebige Serien empfiehlt sich stationärer Einsatz mit geeigneter Kühlung. Materialeigenschaften und Hinweise zur Lebensdauer Das Material HSS-G kombiniert Zähigkeit und Schärfe, ist jedoch aufgrund des Schleifprozesses empfindlicher gegen Stoßbelastungen als walzgewalzte Varianten. Bei der Bearbeitung von harten Materialien wie Edelstahl hilft der Spitzenwinkel 135°, den Anbohrwiderstand zu reduzieren und das Abdriften zu minimieren. Eine angepasste Schnittgeschwindigkeit und Kühlmittel verlängern die Standzeit deutlich. Setzen Sie auf die MetavCUT Standard Line für zuverlässige, präzise Metallbohrungen; bei Fragen erreichen Sie die Metav-Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 63105-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Material: HSS-G Norm: DIN 338 Fakten Durchmesser: 10,5 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 1 Besonderheiten Schaftausführung: reduziert 10 mm Ausführung: geschliffen Farbe: silber HSS-G: geschliffen, hohe Schärfe und Rundlaufgenauigkeit FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer aus der Standard Line ist ausgelegt für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe; für besonders harte Werkstoffe empfiehlt sich die Nutzung mit Kühlmittel. Passt der Bohrer in Bohrfutter mit 10 mm Spannbereich? Ja, durch den reduzierten Schaft 10 mm lässt sich der Spiralbohrer sicher in Bohrfutter mit begrenzter Spannweite einspannen, ohne den Bohrdurchmesser zu reduzieren. Ist der geschliffene Bohrer für Handgeführte Maschinen geeignet? Der geschliffene HSS-G-Bohrer eignet sich grundsätzlich für Handgeführte Maschinen im Standard-Bereich, allerdings ist bei präzisen oder stoßgefährdeten Anwendungen stationärer Einsatz mit Kühlung zu bevorzugen. Warum wurde ein Spitzenwinkel von 135° gewählt? Der Spitzenwinkel 135° reduziert das Anbohrmoment bei harten Werkstoffen und erzeugt saubere Einstiche, wodurch das Risiko von Abdriften und Aufrauen des Bohrrandes minimiert wird.
10.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Die Kombination aus HSS-Werkstoff und kurzer Ausführung sorgt für hohe Stabilität und zuverlässige Metallbearbeitung; die Einhaltung der DIN 338 garantiert Normkonformität und Austauschbarkeit. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 10,1 mm Typ N von MetavCUT Der Spiralbohrer 10,1 mm ist ein kurzer HSS-Bohrer nach DIN 338, ausgelegt für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. HSS für legierten und unlegierten Stahl Kurze Ausführung für erhöhte Stabilität DIN 338 Normkonformität für Austauschbarkeit Spitzenwinkel 118° für einfache Zentrierung Zylinderschaft kompatibel mit Handbohrmaschine Mehr Präzision durch kurze Bauart und stabile Führung Die kurze Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren in Metall. Diese Bauweise verringert das Risiko von Vibrationen und Bohrerverwindung, was zu saubereren Bohrbildern und längerer Standzeit führt. Für Anwender bedeutet das weniger Nacharbeit und bessere Passgenauigkeit bei Montagebohrungen. HSS-Material für vielseitige Werkstoffeinsatzmöglichkeiten Der Einsatz von HSS (Schnellarbeitsstahl) macht den Bohrer elastisch und widerstandsfähig gegen Bruch, besonders bei Durchmessern unter 6 mm, bleibt aber auch bei 10,1 mm robust für viele Anwendungen. HSS eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe, wodurch der Bohrer in Werkstatt und Produktion vielseitig verwendet werden kann. Passgenau für Metallarbeiten und einfache Maschinenanbindung Durch die Auslegung nach DIN 338 ist die Fertigung und der Schaftstandard garantiert, was die Einspannbarkeit in handelsübliche Handbohrmaschine erleichtert. Der Zylinderschaft sorgt für sicheren Halt im Bohrfutter und minimiert das Durchrutschen bei hohen Vorschubkräften. Anwender profitieren von schneller Werkzeugwechselbarkeit und konstanter Bearbeitungsqualität. Praktische Hinweise zu Spitzenwinkel und Anbohrtechnik Der voreingestellte Spitzenwinkel von 118° ist optimal für allgemeine Metallarbeiten und erleichtert das Zentrieren auf ebener Fläche. Bei gehärteten Werkstoffen oder bei Bedarf an reduzierter Anbohrzeit empfiehlt sich ein größerer Winkel oder ein Vorbohren mit Zentrierbohrer. Richtiges Kühlen und moderate Vorschubgeschwindigkeiten verlängern die Standzeit merklich. Empfehlung: Für präzise und stabile Metallbohrungen den MetavCUT HSS Spiralbohrer Typ N wählen und bei Detailfragen die technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren_ Produktmerkmale Artikelnummer: 40101-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Material: HSS Norm: DIN 338 Typ: Typ N Farbe: schwarz Verpackungseinheit: 5 Fakten Durchmesser: 10,1 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 118° Besonderheiten Ausführung: kurz Einsatzgebiet: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine SKU: 40101-FDA FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer Typ N aus HSS eignet sich für viele Stahlsorten, bei sehr hartem Edelstahl sollten jedoch spezielle Beschichtungen oder ein größerer Spitzenwinkel in Erwägung gezogen werden. Welche Maschine wird empfohlen? Für optimale Ergebnisse empfiehlt sich die Verwendung an stationärer Säulenbohrmaschine oder einer leistungsfähigen Handbohrmaschine; durch den Zylinderschaft ist der Bohrer einfach zu spannen. Wie wirkt sich die kurze Ausführung auf die Standzeit aus? Die kurze Ausführung erhöht die Stabilität und reduziert Schwingungen, was in der Regel zu geringerer Werkzeugbelastung und damit zu längerer Standzeit führt. Wird der Bohrer einzeln oder als Set geliefert? Die Verpackungseinheit beträgt 5 Stück; das Produkt ist unter der Artikelnummer 40101-FDA gelistet.
Reliable holemaking for every production environment
Metal drill bits, primarily classed as HSS drill bits, deliver process-secure, dimensionally accurate holes across a wide range of metallic materials. Designed for both hand-held drilling and CNC series production, these twist drills maintain cutting performance at elevated temperatures and provide the toughness required for industrial workshop and machining applications.
Why these drills matter in your workflow
The core function of metal drill bits is centred on efficient material removal with consistent hole geometry and repeatable centring. Their geometry and cutting-edge design reduce the need for rework, permit drilling without prior centre-punching on many surfaces, and ensure reliable chip evacuation. In practice, this means shorter cycle times on batch runs, safer setup for manual operations, and stable performance under the demands of production.
- Increased production uptime through predictable tool life and wear behaviour.
- Better first-pass quality thanks to optimised tip geometry and cross-point design.
- Versatile material capability: suitable for structural steels, cast irons and non-ferrous metals.
- Compatibility with hand drills, pillar drills and CNC machines for workshop-to-production scalability.
Benefits you can measure
- Reduced rework rates and improved hole tolerances.
- Longer intervals between tool changes when using HSS-Co 5 or HSS-Co 8 variants.
- Improved centring and reduced walking on smooth surfaces thanks to cross-point geometry.
- Flexibility across material classes from aluminium to hardened steels when selecting the appropriate grade.
Metav as your precision partner
Metav combines decades of industry expertise with a comprehensive range that democratises precision for workshops and procurement teams. From the logistics hub in Emmerich, Metav acts as a quality filter for the European market, supporting over 48,000 customers and stocking more than 250,000 products. For buyers seeking a single, reliable source for high-performance drill solutions, Metav offers consistent availability and a professionally curated selection of metal drill bits and related tooling.
Technical data at a glance
- material: high-speed steel (HSS)
- variant: rolled HSS-R; ground HSS-G; high-alloy HSS-E
- cobalt options: HSS-Co 5; HSS-Co 8
- suitable for: alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron, aluminium, copper, brass
- geometry: typical tip angles 118° and 135°; cross-point (split point) for reduced walking
- application environments: hand drilling, pillar drill, CNC machining
Compact and reliably engineered, these metal drill bits—also referred to as HSS drill bits or twist drills—form the backbone of precision drilling operations in industrial and workshop settings.
FAQ
What distinguishes HSS drill bits from cobalt variants?
HSS drill bits provide high toughness and good performance at elevated temperatures; HSS-Co 5 and HSS-Co 8 variants add cobalt for increased hot hardness and extended tool life when machining tougher or stainless steels.
Which materials can metal drill bits handle reliably?
Metal drill bits are suitable for alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron and non-ferrous metals such as aluminium, copper and brass, depending on the selected grade and geometry.
When should I choose ground HSS-G over rolled HSS-R?
Choose ground HSS-G for higher concentricity, better chip evacuation and longer service life in production; rolled HSS-R is a cost-effective option for standard workshop tasks.
How does tip geometry affect drilling performance?
Tip angles around 118° are common for general-purpose drilling, while 135° tips and cross-point designs improve penetration and reduce walking on harder or polished surfaces.
Can these drill bits be used on CNC machines?
Yes—metal drill bits are suitable for hand-held, pillar and CNC operations; selection of grade and geometry should match the machine capability and workpiece material.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com