Precision metal drills for reliable, high-performance holemaking
Precision metal drills, commonly supplied as HSS twist drills, are engineered to produce clean, dimensionally accurate cylindrical holes in materials such as alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron and non-ferrous metals like aluminium, copper and brass, delivering consistent results in both manual and CNC operations. Their high-speed steel construction provides exceptional toughness, elasticity and fracture resistance, while variants such as roll-formed HSS-R and ground HSS-G offer cost-effective general performance or enhanced runout accuracy and chip evacuation respectively, and HSS-E or HSS-Co types ensure superior hot hardness when machining stainless or highly alloyed steels. Optimised point geometries (typically 118° for softer steels and 135° for harder grades) combined with a cross grind reduce feed force, enable accurate centring and promote efficient chip removal, improving process reliability and prolonging tool life.
39,5mm Spiralbohrer HSS, 118° Spitzenwinkel, Morsekegel, gefräst, 200mm Spirallänge, schwarz, DIN 345 - MetavCUT
Die Kombination aus Gefräster Spirale, HSS-Material und Morsekegel sorgt für präzise Löcher und hohe Standzeit bei schweren Metallarbeiten; profitieren Sie von der effizienten Spanabfuhr und der stabilen Kraftübertragung. Bestellen Sie das MetavCUT Standard Line direkt bei Metav oder lassen Sie sich vor dem Kauf telefonisch oder per eMail beraten. Spiralbohrer von MetavCUT — Standard Line, Morsekegel Spiralbohrer von MetavCUT für anspruchsvolle Metallbearbeitung, gefräste Spirale und Morsekegelschaft für stationäre Maschinen Gefräste Spirale für präzisen Rundlauf HSS-Werkstoff für hohe Verschleißfestigkeit Morsekegelschaft: sichere Kraftübertragung Ø 39,5 mm für schwere Bohrarbeiten Spiralänge 200 mm für tiefe Bohrungen Präzision und Lebensdauer durch gefräste Geometrie Die gefräste Wendel bietet präzise Konturen und einen konstanten Rundlauf, wodurch die Bohrung sauber und maßhaltig wird. Durch die Herstellung aus dem vollen Material ist die Schneidengeometrie schärfer als bei rollgewalzten Varianten, was besseren Bohrfortschritt und längere Standzeiten bedeutet. Für Betriebe, die auf wiederholbare Genauigkeit setzen, reduziert sich so der Aufwand für Nachbearbeitung und Ersatzwerkzeug. Geeignet für schwere industrielle Metallarbeiten Mit einem Durchmesser von 39,5 mm ordnet sich dieser Bohrer in den großen Bereich ein und ist damit ideal für den Einsatz in stationären Ständerbohrmaschinen und im Stahlbau. Die Kombination aus HSS-Material und großer Spirallänge ermöglicht das Bohren in Baustahl, Gusswerkstoffe und zähe Metalle, vorausgesetzt es wird mit geeigneter Kühlung gearbeitet. Das Ergebnis ist ein stabiler Bohrprozess mit gleichbleibender Qualität. Sichere Aufnahme und Kraftübertragung durch Morsekegel Der Morsekegelschaft gewährleistet eine selbsthemmende Aufnahme in der Maschine und überträgt hohes Drehmoment sicher auf das Werkzeug. Das vereinfacht das Aufnehmen auf der Ständerbohrmaschine und minimiert Spiel in der Schnittzone. Anwender profitieren von verbesserter Rundlaufgenauigkeit und unkompliziertem Wechseln; zum Lösen reicht der Austreiblappen oder ein Keil. Materialeigenschaften, Spitzenwinkel und Anwendungshinweise Der Bohrer besteht aus HSS nach DIN 345 und ist für typische Metallaufgaben bis zu hohen Festigkeiten geeignet. Der Spitzenwinkel von 118° ist optimiert für bessere Zentrierung auf gewölbten Flächen und für weichere bis mittelharte Werkstoffe; bei sehr harten Materialien kann ein flacherer Winkel die Standzeit verbessern. Zur Vermeidung von Überhitzung empfiehlt sich konstante Kühlschmierstoffzufuhr. Für präzise, langlebige Bohrungen in der Werkstatt empfehlen wir die Wahl des MetavCUT Standard Line mit Morsekegel und gefräster Wendel; bei Fragen zur Anwendung erreichen Sie unsere Experten in Emmerich per eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 51395-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 39,5 mm Gesamtlänge: 349 mm Spiralänge: 200 mm Spitzenwinkel: 118° Verpackungseinheit: 1 Besonderheiten Material: HSS Ausführung: gefräst Schaft: Morsekegel (MK, konischer Schaft für präzise Aufnahme) Norm: DIN 345 Farbe: schwarz Hersteller: MetavCUT SKU: 51395-FDA FAQ Welche Maschinen eignen sich für diesen Bohrer? Der Spiralbohrer von MetavCUT mit Morsekegel ist für stationäre Ständerbohrmaschinen mit passender Morsekegelaufnahme konzipiert und liefert dort beste Rundlaufgenauigkeit. Für welche Werkstoffe ist der Bohrer geeignet? Der MetavCUT Standard Line Spiralbohrer aus HSS eignet sich für Baustahl, Gusswerkstoffe, Neusilber und andere nicht extrem hochfeste Materialien bis etwa 900 N/mm². Wie beeinflusst die gefräste Herstellung die Nutzung? Die Gefräste Spirale sorgt für schärfere Schneiden und besseren Bohrfortschritt, was längere Standzeiten und präzisere Bohrbilder im Vergleich zu rollgewalzten Bohrern ermöglicht. Wie tief kann man mit diesem Bohrer sicher bohren? Dank der Spiralänge von 200 mm eignet sich der Bohrer für relativ tiefe Durchgangs- und Sacklochbohrungen in stationären Maschinen; bei sehr tiefen Löchern sollte auf Spanabfuhr und Kühlung geachtet werden. Gibt es Hinweise zur Zentrierung bei großen Durchmessern? Bei großen Durchmessern wie 39,5 mm empfiehlt es sich, ein mehrstufiges Vorbohren oder ein Zentrierbohrverfahren zu nutzen, um die Querschneide zu entlasten und das Wandern zu minimieren.
39,5mm Spiralbohrer HSS, 118° Spitzenwinkel, Morsekegel, rollgewalzt, schwarz, 200mm Spirallänge - MetavCUT
Spiralbohrer von MetavCUT — HSS Spiralbohrer mit Morsekegel (DIN 345) Der Spiralbohrer von MetavCUT ist ein rollgewalzter HSS-Bohrer für stationäre, schwere Bohrarbeiten in Stahl und Guss. Spiralbohrer 39,5 mm für schweren Stahl HSS rollgewalzt für hohe Zähigkeit Morsekegelschaft für stationäre Maschinen Spirallänge 200 mm für tiefe Bohrungen DIN 345 Standard, Serie Standard Line Überzeugende Zähigkeit für anspruchsvolle Bohrungen Der MetavCUT Spiralbohrer ist aus HSS gefertigt und durch das Rollgewalzte Herstellverfahren besonders zäh und bruchsicher. Diese Zähigkeit reduziert das Risiko von Ausbrüchen bei hohen Vorschubkräften und steigert die Standzeit bei Unterbrechungen im Prozess. Für Betriebe, die robuste Werkzeuge für den rauen Einsatz suchen, liefert dieser Bohrer eine wirtschaftliche und belastbare Lösung. Für großvolumige und stationäre Anwendungen optimiert Mit einem Durchmesser von 39,5 mm und einer Gesamtlänge von 349 mm empfiehlt sich der Bohrer vor allem für stationäre Säulenbohrmaschinen mit Morsekegel-Aufnahme. Der Morsekegel sorgt für sichere Selbsthemmung und zuverlässige Drehmomentübertragung, wodurch schwere Bohrungen ohne Rutschen ausgeführt werden können. Mobile Akkumaschinen sind für diesen Einsatzzweck nicht vorgesehen. Anleitung für präzise und sichere Anwendung Bei Bohrungen über 25 mm empfiehlt sich ein mehrstufiges Aufbohren, um die Querschneide zu entlasten und eine saubere Spanabfuhr zu gewährleisten. Die Spirallänge von 200 mm erlaubt tiefe Sackloch- und Durchgangsbohrungen, vorausgesetzt, die Kühlung und Spanabfuhr werden sichergestellt. Der Spitzenwinkel von 118° ermöglicht ein kontrolliertes Eindringen und eine gute Zentrierung auf gewölbten Oberflächen. Materialkompatibilität und Einsatzbereiche Der Bohrer eignet sich für legierten und unlegierten Stahl bis ca. 900 N/mm², Gusseisen, Nichteisenmetalle und Kunststoffe. Für sehr harte oder gehärtete Stähle ist die Wahl von Vollhartmetall oft wirtschaftlicher; für allgemeine Reparatur-, Wartungs- und Maschinenbauarbeiten bietet dieses Werkzeug jedoch ein ausgewogenes Verhältnis aus Robustheit und Kosten. Produktionsqualität und Normkonformität Der Spiralbohrer entspricht DIN 345 und ist Teil der Standard Line von MetavCUT, was eine unkomplizierte Integration in vorhandene Prozesse und Ersatzteilkonzepte ermöglicht. Die rollgewalzte Ausführung bietet ein gutes Preis-Leistungs-Verhältnis für gröbere Einsätze, während die HSS-Materialwahl die Zähigkeit und Temperaturbeständigkeit im Praxisbetrieb unterstützt. Für schwere Bohraufgaben empfehlen wir den Einsatz des MetavCUT Spiralbohrers mit Morsekegel — bei Fragen zur Anwendung oder zur Bestückung Ihrer Maschine erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Leistungsmerkmale Artikelnummer: 54395-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Material: HSS Norm: DIN 345 Schaft: Morsekegel Ausführung: rollgewalzt Farbe: schwarz Verpackungseinheit: 1 Fakten Durchmesser: 39,5 mm Gesamtlänge: 349 mm Spirallänge: 200 mm Spitzenwinkel: 118° Besonderheiten Geeignet für: legierter und unlegierter Stahl, Gusseisen, Nichteisenmetalle, Kunststoffe Morsekegel: selbsthemmend, hohe Drehmomentübertragung Rollgewalzt: zäher und bruchsicherer Herstellungsprozess DIN 345: standardisierte Abmessungen und Toleranzen FAQ Welche Maschinen sind für den Einsatz des Bohrers geeignet? Der MetavCUT Spiralbohrer mit Morsekegelschaft ist für stationäre Säulenbohrmaschinen und Drehmaschinen mit passender Morsekegel-Aufnahme konzipiert; mobile Akkumaschinen sind für den Durchmesser von 39,5 mm nicht geeignet. Ist der Spiralbohrer für gehärtete Stähle geeignet? Für gehärtete Stähle kann der HSS-Bohrer aus der Standard Line eingesetzt werden, allerdings empfiehlt sich bei sehr harter Werkstoffbeschaffenheit oft Vollhartmetall; das Modell 54395-FDA eignet sich vor allem für Stähle bis ca. 900 N/mm². Wie sollte man bei Bohrungen über 25 mm vorgehen? Bei solchen Durchmessern ist ein mehrstufiges Aufbohren zu empfehlen; der Spiralbohrer mit 39,5 mm erreicht beste Ergebnisse, wenn vorgebohrt und die Spanabfuhr durch Kühlung unterstützt wird. Welche Vorteile hat die rollgewalzte Ausführung? Die rollgewalzte Herstellung macht den Bohrer zäher und weniger bruchanfällig, wodurch sich die Gerätekosten bei rauen Einsatzbedingungen reduzieren; die Maßhaltigkeit ist gegenüber geschliffenen Bohrern etwas geringer. Welche Kriterien sprechen für den Kauf dieses Bohrers? Wenn Robustheit, sichere Spannungsaufnahme durch Morsekegel und die Eignung für reparatur- und montageorientierte Stahlarbeiten wichtig sind, bietet der MetavCUT Spiralbohrer eine wirtschaftliche und zuverlässige Lösung.
39mm Gefräster HSS Spiralbohrer, 118° Spitzenwinkel, MK Schaft, 200mm Spirallänge, schwarz - MetavCUT
Spiralbohrer (HSS, 39 mm, Morsekegel) Der Spiralbohrer ist ein gefräster HSS-Bohrer für präzise Metallbohrungen an stationären Bohrmaschinen und für anspruchsvolle Industrieanwendungen. Gefräste Spiralflanke für hohe Rundlaufgenauigkeit HSS-Material für Stahl bis 900 N/mm² Morsekegel-Schaft für sicheren Halt 39 mm Durchmesser, Spirallänge 200 mm DIN 345 Norm, Serie Standard Line Gefräste Fertigung für hohe Präzision und längere Standzeit Die gefräste Herstellungsart sorgt für eine klare Schneidengeometrie und eine verbesserte Rundlaufgenauigkeit, was insbesondere bei großen Durchmessern ab 30 mm entscheidend ist. Durch die Kombination aus HSS-Werkstoff und gefräster Spiralnut verbessert sich der Bohrfortschritt und die Standzeit, weil die Spanabfuhr effizienter erfolgt. Solche Vorteile führen zu weniger Nacharbeit und stabileren Bohrbild, was die Produktivität in Fertigung und Instandhaltung erhöht. Zuverlässige Leistung beim Bohren von Stahl, Guss und Nichteisenmetallen Der Bohrer ist ausgelegt für den Einsatz in legiertem und unlegiertem Stahl, Gusseisen und Nichteisenmetallen. Die Konstruktion erlaubt Bohrungen in Werkstoffe bis etwa 900 N/mm², wobei der Spitzenwinkel 118° ein gutes Eindringverhalten bietet. Für weichere Materialien führt dieser Winkel zu einfacherem Zentrieren; bei sehr harten Werkstoffen empfiehlt sich eine angepasste Spitzengeometrie. Das Resultat ist eine belastbare Schnittkante und reduzierte Vibrationen beim Bohren. Empfohlene Maschinen und Arbeitsschritte für große Durchmesser Mit einem Durchmesser von 39 mm gehört der Bohrer in den Bereich für großvolumige Bohrungen, ideal für stationäre, steife Maschinen mit ausreichender Kühlung. Für solche Zielmaße ist ein Mehrstufiges Aufbohren ratsam: Vorbohren mit kleineren Durchmessern reduziert die Belastung der Querschneide und verhindert Ausbrüche. Werkstätten profitieren von der Kombination aus stabiler Aufnahme und gezielter Vorschubregelung, um exakte Durchmesser und saubere Bohrkanten zu erreichen. Sichere Handhabung und fester Sitz durch Morsekegel Der Morsekegel-Schaft gewährleistet eine selbsthemmende Verbindung zur Aufnahme, überträgt hohes Drehmoment zuverlässig und reduziert Schlupf. Zum Entfernen dient oft ein Austreiblappen; beim Einbau ist auf saubere Kegeloberflächen zu achten. Bei großen Durchmessern sind stationäre Spannmittel und eine konstante Kühlmittelzufuhr empfohlen, um Überhitzung zu vermeiden und die Werkzeuglebensdauer zu maximieren. Setzen Sie auf die Präzision der MetavCUT Standard Line und fordern Sie Ihr technisches Angebot an per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Leistungsmerkmale Artikelnummer: 51390-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 39 mm Gesamtlänge: 349 mm Spirallänge: 200 mm Spitzenwinkel: 118° Besonderheiten Material: HSS (Schnellarbeitsstahl) Schaft: Morsekegel (MK = selbsthemmend, hohe Drehmomentübertragung) Norm: DIN 345 Ausführung: Gefräst (präzise Geometrie, verbesserte Standzeit) Farbe: Schwarz Verpackungseinheit: 1 FAQ Für welche Materialien eignet sich der Bohrer am besten? Der Spiralbohrer von MetavCUT (Standard Line, SKU 51390-FDA) eignet sich für legierten und unlegierten Stahl, verschiedene Gussarten sowie Nichteisenmetalle und Kunststoffe bis etwa 900 N/mm². Welche Maschine ist für den Einsatz des Bohrers zu empfehlen? Für den MetavCUT Spiralbohrer (51390-FDA) werden stationäre Bohrmaschinen mit Morsekegel-Aufnahme empfohlen, da der Morsekegel-Schaft sichere Kraftübertragung und hohen Rundlauf gewährleistet. Ist Vorbohren erforderlich und wie sollte es erfolgen? Bei einem Durchmesser von 39 mm empfiehlt sich ein mehrstufiges Aufbohren; der MetavCUT Spiralbohrer (Standard Line) erzielt so die besten Ergebnisse bei Standzeit und Bohrbild. Wie wird der Bohrer aus der Morsekegel-Aufnahme gelöst? Der Schaft des MetavCUT Spiralbohrers (51390-FDA) wird üblicherweise mit einem Austreiber über den Austreiblappen entfernt; saubere Kegeloberflächen erleichtern das Lösen. Welche Vorteile bringt die gefräste Ausführung gegenüber rollgewalzten Bohrern? Die gefräste Ausführung des MetavCUT Spiralbohrers (Standard Line) liefert schärfere Kanten und höhere Rundlaufgenauigkeit, was zu besserem Bohrfortschritt und längerer Standzeit führt.
39mm Spiralbohrer, 118° Spitzenwinkel, HSS, rollgewalzt, Morsekegel, 200mm Spirallänge - MetavCUT
Robuste Kombination aus rollgewalzter Fertigung und HSS-Material sorgt für hohe Bruchsicherheit und zuverlässige Leistung beim Bearbeiten von Stahl und Guss. Bestellen Sie den Spiralbohrer direkt bei Metav Werkzeuge oder nutzen Sie unsere technische Beratung bei offenen Fragen an info@metav-werkzeuge.com. Spiralbohrer von MetavCUT (HSS, DIN 345, Morsekegel, Ø 39 mm) Der Spiralbohrer von MetavCUT ist ein rollgewalzter HSS-Bohrer für das zuverlässige Durchbohren von Stahl, Gusseisen und Nichteisenmetallen in stationären Maschinen. HSS-Ausführung nach DIN 345 Rollgewalzte Fertigung für hohe Zähigkeit Morsekegel-Schaft für feste Spannverbindung Ø 39 mm, Gesamtlänge 349 mm, Spirallänge 200 mm Spitzenwinkel 118° für leichte Zentrierung Hohe Zähigkeit durch rollgewalzte Fertigung für weniger Bruchrisiko Die rollgewalzte Herstellung macht den Bohrer besonders zäh und bruchsicher, weil ein erhitzter Rundstab in die Spiralform gepresst wird. Für Anwendungen mit geringerer Rundlaufanforderung bietet diese Fertigung einen wirtschaftlichen Vorteil gegenüber geschliffenen Bohrern. Das Material HSS verbindet Schnitthaltigkeit mit Elastizität, wodurch insbesondere Bohrungen unter 6 mm Bruchrisiko reduzieren; bei großen Durchmessern wie 39 mm profitieren Anwender von robuster Spanbildung und längerer Standzeit. Sichere Kraftübertragung und präzise Aufnahme mit Morsekegel Der konische Morsekegel sorgt für eine formschlüssige Verbindung in Ständerbohrmaschinen und gewährleistet eine hohe Übertragbarkeit von Drehmoment. Durch die Selbsthemmung im Kegel sitzt der Schaft fest und reduziert Vibrationen, was zu besseren Bohrbildern führt. Für das Aufbohren und Nacharbeiten großer Löcher ist die Verwendung einer stabilen Aufnahme unverzichtbar; der Einsatz in stationären Maschinen ist daher empfohlen, um Motor- und Getriebebelastung zu minimieren. Geeignet für vielfältige Metallarbeiten bis ca. 900 N/mm² Der Bohrer ist ausgelegt für legierten und unlegierten Stahl, Grauguss, Temperguss, Sphäroguss, Sintereisen sowie Neusilber und andere Nichteisenmetalle. Mit DIN 345 Norm und einem Spitzenwinkel von 118° bietet die Geometrie eine gute Zentrierung auf leicht gewölbten Oberflächen und erleichtert den Anbohrvorgang. In der Praxis empfiehlt sich bei harten Werkstoffen angepasste Kühlung und moderate Schnittgeschwindigkeit, um Standzeit zu erhöhen und Gratbildung zu reduzieren. Praxisnahe Einsatzempfehlung und Pflegehinweise für lange Lebensdauer Bei großen Durchmessern ist mehrstufiges Vorbohren ratsam: zunächst kleinere Bohrer verwenden, um die Querschneide zu entlasten und die Spanabfuhr zu verbessern. Regelmäßige Kühlung und das Entfernen von Spänen verhindern Überhitzung und Ruheschäden am Werkzeug. Die rollgewalzte Ausführung verträgt wechselnde Vorschübe gut, erfordert aber eine stabile Maschinenbasis; für mobile Akkugeräte ist dieser Bohrertyp nicht ausgelegt. Lagerung trocken und sauber erhalten, um Korrosion zu vermeiden. MetavCUT empfiehlt diesen rollgewalzten HSS-Spiralbohrer als robuste Lösung für anspruchsvolle Metallbearbeitung; bei technischer Abstimmung oder Stückbedarf wenden Sie sich an Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 54390-FDA Hersteller: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 345 Zahlen Durchmesser: 39 mm Gesamtlänge: 349 mm Spirallänge: 200 mm Spitzenwinkel: 118° Besonderheiten Ausführung: rollgewalzt Material: HSS Schaftausführung: Morsekegel Farbe: schwarz Anwendung: Bohrer für Metall Verpackungseinheit: 1 SKU: 54390-FDA FAQ Ist der Bohrer für stationäre Ständerbohrmaschinen geeignet? Ja, der MetavCUT Spiralbohrer (HSS, DIN 345) mit Morsekegel ist für stationäre Ständerbohrmaschinen konzipiert und überträgt hohes Drehmoment sicher, wodurch saubere und maßhaltige Löcher entstehen. Für welche Werkstoffe eignet sich dieser Spiralbohrer? Der Spiralbohrer von MetavCUT eignet sich für legierten und unlegierten Stahl bis ca. 900 N/mm², Grauguss, Temperguss sowie Nichteisenmetalle wie Neusilber; bei harten Materialien Kühlung und angepasste Schnittwerte empfehlen. Muss bei Ø 39 mm vorgebohrt werden? Ja, bei großen Durchmessern wie 39 mm empfiehlt sich mehrstufiges Vorbohren, um die Querschneide zu entlasten und eine sichere Spanabfuhr zu gewährleisten; so steigt die Standzeit des Werkzeugs. Welche Rolle spielt der Spitzenwinkel 118° in der Praxis? Der Spitzenwinkel 118° erleichtert die Zentrierung auf leicht gewölbten Oberflächen und ist ein guter Kompromiss für allgemeine Metallarbeiten; bei weichen Materialien kann ein schärferer Winkel sinnvoll sein. Wie ist die Aufnahme des Schafts ausgeführt und welche Vorteile bietet sie? Der Schaft ist als Morsekegel ausgeführt, was eine feste, selbsthemmende Verbindung in passenden Aufnahmen ermöglicht und die Kraftübertragung sowie die Laufruhe bei hohen Belastungen verbessert.
3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, 3 mm, 118°, black, DIN 338 by MetavCUT The Twist Drill is a short Type N HSS metal drill designed for drilling machines and hand drills, delivering stable, precise holes in metalwork. Short design for high stability HSS material suitable for metal drilling 3 mm diameter for fine, precise holes 118° tip angle for reliable centring Conforms to DIN 338 for consistent quality Precise metal drilling with robust HSS construction The short Twist Drill from MetavCUT is engineered for demanding metalworking tasks where stability and repeatable accuracy matter. Thanks to its HSS (High Speed Steel) composition, the bit offers a favourable combination of elasticity and hardness that reduces the risk of breakage in small diameters and copes well with alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The reduced overhang of the short design increases rigidity, which leads to straighter bores and less vibration when used in a drilling machine or a suitable hand drill. Faster set-up and better centring for consistent results A 118° tip angle on this Type N geometry helps with rapid penetration and improved centring on slightly curved or uneven surfaces, making start-up easier without an elaborate centre punch. With a 3 mm cutting diameter and a compact overall length, the tool excels where tight tolerances and repeatability are required. The short flute length reduces chatter and improves surface finish of the hole. For users unfamiliar with terminology: Type N indicates the normal spiral geometry for metal drilling, optimised for general-purpose metalworking. Conformity, application and practical benefit for workshops Manufactured to DIN 338 standards, this short Twist Drill is classified among short cylindrical-shank HSS drills and is suitable for both stationary and portable drilling equipment. Its design focus is on metal applications, so machinists and maintenance technicians will appreciate the stability during repetitive production tasks or repair work. If a workpiece demands deeper or specialised drilling, selecting a longer or alternative geometry drill remains advisable, but for precision through-holes up to moderate depths this short HSS option offers clear operational advantages and simplified tool handling. Recommendation: For precise metalworking choose the MetavCUT Twist Drill Type N short HSS for its stability and conformity to DIN 338 — for technical guidance or to confirm suitability contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Specifications for reliable planning Designation: Twist Drill Brand: MetavCUT SKU: 40030-FDA Diameter: 3 mm Tip Angle: 118° Type: Type N Colour: black Execution: short Standard: DIN 338 Material: HSS Overall Length: 61 mm Spiral Length: 33 mm For Drilling Machine: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it works well on alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics. The HSS material and Type N geometry make this drill suitable for standard metalworking tasks where elastic toughness and resistance to breakage are important. Which three drill types are commonly distinguished? Commonly, drills are classified as metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking rather than wood or masonry applications.
3mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill Karosseriebohrer – Double‑Sided Twist Drill, 3 mm, 135° tip, HSS‑G, Black Finish The Body Drill Karosseriebohrer is a double‑sided Twist Drill designed for precision metalworking with Drilling Machines, ideal for sheet‑metal and bodywork applications. Double‑ended Twist Drill for extended use HSS‑G ground for precise, clean holes 135° tip angle for hard materials like stainless steel Fully ground shank for high runout accuracy Black finished without margin for corrosion resistance Faster, cleaner holes in hard metals Forged for demanding metalwork, this HSS‑G ground drill delivers quick penetration and consistently clean holes. Ground geometry produces very sharp cutting edges and excellent concentricity, which reduces vibration and improves hole quality. The 135° tip angle is optimised for tougher materials such as stainless steel and tempered alloys, shortening dwell time at the start of the hole and lowering the risk of workpiece distortion. This results in higher throughput for shop tasks where precision and repeatability matter. Less downtime with a double‑ended design A double‑sided configuration means the tool functions as two tips in one, so operations continue simply by flipping the drill when one end dulls. This compact, short design is particularly stable for thin sheets and rivet holes in automotive and bodywork contexts. In addition, the fact that the flute geometry is CNC‑ground rather than rolled ensures consistently sharp cutting edges, making the tool noticeably more precise for serial work and reducing the need for immediate replacements. Reliable centring and runout‑stable performance The fully ground shank provides superior runout accuracy compared with rolled alternatives, keeping holes concentric even at higher spindle speeds. A precise shank reduces wobble in handheld Drilling Machines and bench rigs, yielding neat, usable holes without additional rework. The black finished surface without margin offers a robust protective layer while keeping the cutting geometry intact for longer service intervals. Ideal users and practical applications Metalworkers, panel beaters and maintenance technicians benefit most from this Profi Line tool. It is well suited for unalloyed and alloyed steels, cast steel, cast iron, non‑ferrous metals and hard plastics, where a short, stable bit is advantageous. Typical uses include thin‑sheet drilling, rivet hole preparation and precise through‑holes in repair and assembly situations. For deeper or very large‑diameter holes, use purpose‑designed long‑reach or stepped drills instead. Usage tips to extend tool life To get the best from a ground HSS‑G Twist Drill, moderate spindle speeds and steady feed rates are recommended; coolant or cutting fluid extends life and prevents overheating. Avoid side loading and abrupt axial shocks, as CNC‑ground bits can be more brittle than rolled variants. Routine inspection of cutting edges and correct clamping in a low‑runout chuck will preserve accuracy and safety during high‑volume work. For precision bodywork and metal fabrication we recommend the MetavCUT Profi Line Body Drill Karosseriebohrer—contact METAV Werkzeuge for expert advice and assistance: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical Details Designation: Body Drill Brand: MetavCUT SKU: 59030-FDA Diameter: 3 mm Tip Angle: 135° Execution: double‑sided Spiral Length: 10 mm Overall Length: 46 mm Shank Finish: fully ground Material: HSS‑G Colour / Surface: black finished without margin For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Profi Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill mainly used for? Twist Drills such as the MetavCUT Body Drill Karosseriebohrer are primarily used for machining high‑strength materials and larger hole diameters. The double‑ended, ground design is easy to sharpen, copes with greater loads and is therefore often selected for bodywork and thin‑sheet metal tasks where short, rigid bits ensure clean results. Which three drill types are there? The three common drill categories are metal drills, wood drills and stone/concrete drills, and the MetavCUT Body Drill Karosseriebohrer belongs to the metal drill group tailored for steel, cast materials and hard plastics.
3mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — Twist Drill for Drilling Machine, Diameter 3 mm, 135° Point, Double-sided, Bright Finished, HSS‑G, Fully Ground The Body Drill is a compact Twist Drill designed for Drilling Machine applications, featuring a 3 mm Diameter and a 135° Point Angle for reliable performance in harder metals. Robust HSS‑G material for hard metal drilling Double‑sided design allows quick flip‑over reuse 135° Point Angle for improved centring in stainless steel Fully ground shank for high runout accuracy Short 46 mm overall length suited to sheet metal work Precision for Hard Materials and Faster Cutting Because the twist drill is made from HSS‑G, the tool delivers high cutting performance on alloyed and unalloyed steel, cast steel, and non‑ferrous metals. The 135° Point Angle reduces the tendency to wander when starting a hole in harder materials and shortens the initial penetration time; this results in cleaner holes and improved process reliability. The fully ground geometry allows sharper cutting edges, which translates into up to faster drilling and lower required feed force compared with rolled drills. Practical Design for Automotive and Sheet‑Metal Tasks The double‑ended configuration means the drill functions like two tools in one: when one tip becomes blunt it can be reversed, reducing downtime and stock requirements. Its bright finished surface and relatively short overall length make this bit particularly suitable for bodywork, rivet holes and other thin‑sheet operations where stability and compact reach are required. This design supports efficient workflows in repair shops and manufacturing environments with frequent small holes. Runout Accuracy, Sharpness and Handling Recommendations A fully ground Shank and precision grinding produce improved runout accuracy, yielding rounder, more precise bores. However, ground HSS tools can be more brittle than rolled equivalents; therefore, cooling and moderate speeds are recommended for prolonged tool life. When used with appropriate cutting fluid and correct spindle alignment on a Drilling Machine, the tool provides consistent results and easier re‑grinding when necessary. Who Benefits and When to Choose This Drill Metalworkers, automotive technicians and maintenance teams will find this twist drill advantageous when working with harder steels or when hole quality and centring matter. The combination of HSS‑G metallurgy, the 135° tip geometry and double‑ended usability makes it a practical choice for repair shops and production settings where quick tip reversal and precise holes reduce cycle time. If uncertainty remains about suitability for a specific application, METAV Werkzeuge offers competent technical advice to help determine whether this tool matches the requested material and drilling parameters. We recommend the MetavCUT Body Drill as a reliable Twist Drill for demanding metalworking tasks — for personalised consultation and technical support, contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message +49 170 2837271 on WhatsApp Technical Data Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58030-FDA Diameter: 3 mm Point Angle: 135° Type / For: Drilling Machine Execution: double sided Surface Colour: bright finished Spiral Length: 10 mm Overall Length: 46 mm Shank Execution: fully ground Material: HSS-G Model Series: Standard Line Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Body Drill (Twist Drill) mainly used for? The MetavCUT Body Drill is a Twist Drill primarily applied for metalworking tasks; it is especially suited to high‑strength materials and larger diameters where a robust geometry is required. This design remains easy to re‑grind and withstands higher loads typical of bodywork and thin‑sheet drilling. Which three drill types exist? The common classification distinguishes Metal Drills, Wood Drills and Stone/Concrete Drills. Can the MetavCUT Body Drill (Twist Drill) be used for stainless steel? The MetavCUT Body Drill with its 135° Point Angle and HSS‑G composition is appropriate for stainless steel when used with suitable cutting fluid and moderate cutting speeds; correct feed and cooling optimise hole quality and tool life.
3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G Drill for Metal, Ø 3 mm, 135° Point Angle, Bright Finished The Twist Drill is an extra‑long HSS‑G drill designed for deep, precise metal drilling with a 3 mm Diameter and a 135° Point Angle, suitable for use in a Drilling Machine or Hand Drill. Extra‑long design for deep hole access CNC ground flutes for precise hole quality HSS‑G material for high strength and wear resistance 135° Point Angle for harder materials like Stainless Steel Fully ground shank for accurate centring and low runout Deep reach and reliable hole quality for demanding metalwork The extra‑long geometry with a Total Length of 150 mm and a Spiral Length of 100 mm enables access to deep or hard‑to‑reach bore locations where standard drills fail. Thanks to the HSS‑G ground construction and DIN 1869 specification, the drill produces clean, accurate holes in metal components. This design reduces the need for extension tooling and keeps setups simpler, so drilling operations remain efficient even in confined assemblies. Faster cutting with lower feed force on tough materials A CNC‑ground flute geometry delivers a sharper cutting edge and higher concentricity compared with rolled variants, enabling up to 40% faster drilling and about 50% less required feed force under comparable conditions. The 135° Point Angle is optimised for harder materials, shortening the initial entry time and improving centring when starting a bore in materials such as alloyed steel, grey cast iron and sintered parts. Use with appropriate coolant to maximise tool life. Compatibility, handling and practical machining tips The bright finished surface and fully ground shank ensure stable clamping in standard drill chucks and machine spindles. For best results with the Twist Drill, select moderate cutting speeds for small diameters in high‑strength steels, apply steady coolant or lubricant, and avoid abrupt lateral loads to reduce breakage risk. The tool is suited for both stationary machine use and robust portable drilling where deep bores are required. Who benefits most from this twist drill Metalworkers, maintenance technicians and toolroom specialists who perform precision deep drilling will value the combination of extra‑long reach and HSS‑G edge performance. The drill is particularly helpful when producing through‑holes or deep blind holes in alloyed and unalloyed steels, cast materials and hard plastics where surface finish and dimensional accuracy are priorities. Choose the MetavCUT extra‑long Twist Drill for demanding deep metal drilling — for personalised technical advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 32030-FDA Diameter: 3 mm Total Length: 150 mm Spiral Length: 100 mm Point Angle: 135° Execution: extra long Colour / Finish: Bright finished Shank Execution: Fully ground Material: HSS‑G Standard: DIN 1869 Intended Use: Drills for metal / Drill for Metal Suitable for: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger bore diameters; it is especially suited to deep holes and applications requiring a drill that can be resharpened. Its ground geometry makes it robust for Alloyed and Unalloyed Steel, Cast Steel, Grey Cast Iron, Sintered Iron and Hard Plastics while maintaining good hole quality. Which three drill types exist? There are three main drill categories commonly used: Metal drills (such as the MetavCUT Twist Drill), Wood drills, and Stone/Concrete drills designed for masonry work. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the drill tip and lowers friction; a sharpened point significantly decreases required feed forces and improves centring accuracy when beginning a bore. Can a metal drill be used to drill wood? A metal drill like the MetavCUT Twist Drill can be used in wood, but it typically offers poorer guidance and a less clean finish compared with a dedicated wood drill. Metal drills are easier to resharpen and tend to have lower self‑feeding characteristics. At what bore depths is the Twist Drill most commonly used? A Twist Drill is often used for solid drilling where a cylindrical hole is produced by cutting. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill remains the most frequently applied tool. What is better, HSS or HSSE? The common assumption that HSSE steels are categorically superior to conventional HSS is not universally correct. Decide based on specific working conditions and whether the performance benefits justify a higher purchase cost.
3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — HSS‑G extra long, 3 mm, 135° tip, bright finished, DIN 1869, fully ground by MetavCUT The Twist Drill is an extra‑long HSS‑G bit designed for deep metal drilling and tough materials, offering a 135° tip geometry for improved centring and reduced walking in demanding tasks. Extra‑long design for deep hole drilling 3 mm diameter for precise small holes 135° tip for hard materials like stainless steel Fully ground HSS‑G for high precision Conforms to DIN 1869 for industrial applications Reach deeper holes with stable, reliable performance Built for applications where standard lengths fall short, the extra‑long geometry provides extended reach without frequent tool changes. This extension reduces setup time and increases productivity when machining deep bores. The primary advantage is uninterrupted drilling in assemblies or recessed features, where access is restricted. For best results in stationary or guided setups, cooling and steady feeds are recommended to preserve tool life. Precise cutting and centring for harder materials The 135° tip is optimised for harder materials and reduces tendency to wander at the start of a hole. A single clear benefit is faster penetration with improved centring on metals such as alloyed steel or cast iron. The sharpened geometry means lower axial force during entry, which helps maintain hole position and reduces the risk of workpiece damage when compared with more acute tip angles. Ground flutes (HSS‑G) for accuracy and clean holes A fully ground HSS‑G blank delivers superior roundness and surface finish thanks to CNC grinding of the flutes and cutting lips. This manufacturing method creates very sharp edges and tight tolerances, producing clean, burr‑reduced holes in metal. For operators unfamiliar with the term: "fully ground" means the flute geometry is created by precision grinding rather than rolling, yielding higher dimensional accuracy at the cost of slightly greater brittleness. Designed to meet industrial standards and common machine types Conforming to DIN 1869, this bit is specified for intensive use and deep drilling conditions. It is suitable for use in a Drilling Machine and for machining a range of metals, including unalloyed and alloyed steels up to the specified limits. The combination of a 3 mm diameter and a 180 mm overall length with a 120 mm spiral provides a practical solution where deep, narrow bores are required while maintaining guidance and hole quality. MetavCUT’s extra‑long HSS‑G Twist Drill is recommended for professional metalworking where depth and precision matter — for application advice or to confirm suitability for your project contact METAV Werkzeuge: info@metav-werkzeuge.com • Phone +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 33030-FDA Diameter: 3 mm Tip angle: 135° Execution: extra long Finish: bright finished Shaft execution: fully ground Spiral length: 120 mm Overall length: 180 mm Material: HSS‑G Standard: DIN 1869 For: Drilling Machine Model series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill and which materials does it suit? The MetavCUT Twist Drill is primarily designed for machining high‑strength materials and larger drill diameters; it excels in deep‑hole metalworking and maintains performance in alloyed and unalloyed steels, cast iron and non‑ferrous metals. Which three main drill types exist? The three common drill types are metal drills, wood drills, and masonry/concrete drills, each optimised for different materials and cutting conditions; the MetavCUT Twist Drill belongs to the metal drill category. Why are Twist Drills sharpened (re‑pointed)? Re‑pointing reduces the cross‑cut at the tip, which lowers friction and requires less feed force; this sharpening improves centring and cutting efficiency for the MetavCUT Twist Drill and prolongs effective performance. Can a metal Twist Drill be used for wood? A metal drill can be used in wood, but the MetavCUT Twist Drill will typically offer poorer guidance and a less clean finish than a dedicated wood bit; however, it is easier to resharpen and has reduced self‑feeding characteristics.
3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
MetavCUT Twist Drill — 3 mm, 135° point angle, extra long, bright finished, fully ground, HSS‑G, DIN 1869 the MetavCUT Twist Drill is a high‑precision drilling tool designed for deep metal drilling with hand drills and drilling machines, offering extra length and a 135° point for reliable centring and efficient penetration. Extra‑long design for deep holes Fully ground HSS‑G for precise, clean bores 135° point angle for harder materials Bright finished surface for corrosion resistance Optimised geometry for use in drilling machines Engineered for accurate metal drilling and durable results The HSS‑G material and DIN 1869 conformity ensure the bit is suited for demanding metalworking tasks. The fully ground flute geometry produces sharp cutting edges and a high runout accuracy, which results in cleaner bores and consistent hole dimensions. This construction is particularly advantageous when drilling alloyed and unalloyed steels, cast iron and non‑ferrous metals, because it minimises deformation at the hole edge and supports repeatable results in production or repair work. Extra length for hard‑to‑reach and deep holes With a total length of 240 mm and a spiral (working) length of 160 mm, the extra long execution enables access where standard bits cannot reach. This makes the tool ideal for deep‑hole operations and applications where the workpiece geometry or fixturing places the drill axis far from the operator. The bright finished surface helps reduce corrosion risk during storage and handling and supports smoother chip evacuation in deeper bores. Faster drilling with lower feed force — practical benefits The fully ground HSS geometry offers significant performance advantages: it can drill up to 40% faster and requires approx. 50% less feed force compared with conventional HSS bits of rolled geometry. The 135° point angle reduces initial bite in harder materials and shortens pilot time, improving control and reducing the risk of walking. For best results, use appropriate coolant and, when possible, a stationary setup to mitigate the inherently higher brittleness of ground drills. Recommended applications and user profile This tool is optimised for professional metalworkers, toolrooms and maintenance technicians who need precise, deep holes in steels, cast materials and hard plastics. The bit is suited for use in a Drilling Machine as well as robust hand‑held drills when carefully applied. If in doubt about suitability for a specific alloy or machining parameter, METAV Werkzeuge provides expert consultation to ensure the right selection for the task. Choose MetavCUT’s precision Twist Drill for demanding deep‑hole metalwork — for personalised technical advice and ordering assistance contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 34030-FDA Diameter: 3 mm Point angle: 135° Execution / Type: extra long Colour: bright finished Shaft execution / Shank finish: fully ground Spiral length: 160 mm Total length: 240 mm Material: HSS‑G Standard: DIN 1869 For use in: Drilling Machine (Hand drill compatibility) Application: Drills for metal Model series: Standard Line Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill mainly used for? The MetavCUT Twist Drill is primarily used for drilling high‑strength materials and larger diameters; it is especially effective for deep holes and tasks where a longer overall length is required, providing reliable performance in alloyed and unalloyed steels as well as cast materials. Which three drill types exist? The three main categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is engineered specifically for metalworking applications.
3mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Kompakter, extra kurzer Spiralbohrer mit HSS‑G-Schneidstoff, 3 mm Durchmesser und 135° Spitzenwinkel bietet erhöhte Stabilität, geringere Bruchneigung und bis zu 40 % schnellere Bohrleistung gegenüber herkömmlichen HSS‑Bohrern; Bestellen Sie das Produkt direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an Spiralbohrer 3 mm extra kurz von MetavCUT Der Spiralbohrer 3 mm in extra kurzer Ausführung eignet sich für präzise Metallbohrungen in engen Räumen und für den Einsatz mit Handbohrmaschine. Extra kurz für höhere Stabilität und weniger Bruchneigung HSS‑G geschliffen: bis zu 40 % schnelleres Bohren Zylinderschaft: universell passend für Dreibackenfutter 135° Spitzenwinkel für harte Werkstoffe Spiralänge 16 mm: ideal für Bleche und Profile Mehr Stabilität durch die extra kurze Bauform Die extra kurz ausgeführte Bauform reduziert Hebelwirkung und Vibrationen und führt so zu deutlich geringerer Bruchanfälligkeit bei kleinen Durchmessern. Dadurch wird das Arbeiten in beengten Bereichen vereinfacht und die Standzeit des Werkzeugs erhöht. Besonders bei dünnwandigen Bauteilen sorgt die kompakte Länge für verbesserte Rundlaufgenauigkeit und verlässliche Bohrlöcher. Schneller und effizienter schneiden mit HSS‑G Der aus HSS‑G gefertigte, geschliffene Bohrer reduziert die Anpresskraft und ermöglicht ein bis zu 40 % schnelleres Bohren gegenüber herkömmlichen HSS‑Ausführungen. Die gesteigerte Schnittfähigkeit führt zu saubereren Bohrbilden und reduziert Nacharbeiten, was Zeit und Kosten in der Werkstatt spart. Für Anwender bedeutet das weniger Ermüdung und höhere Produktivität. Geeignet für typische Metallanwendungen in Werkstatt und Montage Der Bohrer ist für den Standard‑Bereich (2,0 mm–13,0 mm) ausgelegt und damit bestens geeignet für Werkstatt, Montage und DIY‑Projekte. Empfohlenes Einsatzfeld sind dünne bis mittlere Bleche, Profile sowie legierte und unlegierte Stähle, Gusseisen und Nichteisenmetalle. Bei hoher Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um ein Wandern zu vermeiden. Eigenschaften der Spitze und Spirale verständlich erklärt Der 135° Spitzenwinkel sorgt für einen flacheren Ansatz, der das Anbohren in harten Werkstoffen wie Edelstahl erleichtert und die Anbohrzeit verkürzt. Die Normalspirale (Typ N) ist die klassische Spirale für Metall und bietet eine ausgewogene Späneförderung bei üblichen Vorschubwerten. Diese Kombination ermöglicht saubere Bohrungen bei geringem Werkzeugverschleiß. Hinweise zur Schaftausführung und Einspannung Die Zylinderschaft erlaubt die universelle Nutzung in Dreibackenfuttern von Handbohrmaschinen. Das erleichtert schnellen Werkzeugwechsel. Bei höheren Drehmomenten besteht allerdings die Möglichkeit des Durchrutschens; hier empfiehlt sich eine sorgfältige Spannprüfung oder der Einsatz von Spannhülsen bzw. besser geeigneten Schaftformen bei stationären Anwendungen. Praxisempfehlungen für sicheres und effizientes Arbeiten Zum sauberen Arbeiten empfiehlt sich angepasstes Kühlmittel bei zähen Werkstoffen und moderater Vorschub, um Überhitzung zu vermeiden. Für den Durchmesserbereich 2–13 mm kann in vielen Fällen direkt gebohrt werden; bei sehr präzisen Passungen ist Anpunkten sinnvoll. Die kurze Bauform unterstützt gutes Führungsverhalten, reduziert Schwingungen und macht das Bohren in engen Einbausituationen zuverlässig möglich. Nutzen Sie die robuste HSS‑G Kurzbauform von MetavCUT und ergänzen Sie Ihre Werkstattausrüstung mit diesem stabilen 3 mm Bohrer; bei Fragen erreichen Sie unsere Beratung per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 56030-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 1897 Fakten Durchmesser: 3 mm Gesamtlänge: 46 mm Spiralänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (Hochleistungsschnellarbeitsstahl) Ausführung: extra kurz Schaftausführung: Zylinder Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine Farbe: blank Hersteller: MetavCUT Serie: Standard Line FAQ Für welche Materialien eignet sich dieser Bohrer besonders gut? Der MetavCUT Spiralbohrer aus der Standard Line mit HSS‑G eignet sich besonders für legierte und unlegierte Stähle, Gusseisen, Temperguss sowie Nichteisenmetalle; die Kombination aus HSS‑G und 135° Spitzenwinkel gewährleistet gute Anbohr‑ und Zerspanungseigenschaften. Ist der Bohrer für den Einsatz in einer Handbohrmaschine geeignet? Ja, die Ausführung mit Zylinderschaft ist für Dreibackenfutter von Handbohrmaschinen vorgesehen; der Spiralbohrer 3 mm (SKU 56030-FDA) wurde für universelle Einsätze in der Werkstatt konzipiert. Wie vermeide ich ein Durchrutschen im Bohrfutter? Bei der Zylinderschaft auf feste Spannung im Dreibackenfutter achten und gegebenenfalls Spannhülsen oder Alternativen mit 3‑Kant‑Schaft verwenden; zudem sorgt korrektes Anziehen des Futters für sicheren Halt. Brauche ich beim Bohren in Edelstahl einen anderen Spitzenwinkel? Der 135° Spitzenwinkel dieses Bohrers ist speziell für härtere Werkstoffe wie Edelstahl ausgelegt und reduziert das Abheben beim Anbohren; für sehr weiche Werkstoffe sind flachere Winkel schneller, dort ist dieser Typ jedoch nicht optimal. Wie unterscheidet sich die extra kurze Ausführung im Alltag? Die extra kurze Bauform bietet mehr Stabilität und geringere Bruchgefahr bei kleinen Durchmessern; für enge Bauverhältnisse und dünnwandige Bauteile ist sie praxistauglicher und ermöglicht kontrollierteres Bohren.
3mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — MetavCUT HSS‑G Fully Ground Twist Drill, 3 mm, 118°, Hex Shank, Silver, DIN 338 A Twist Drill designed as a Drill for Metal for use in Drilling Machines, delivering precise, fast metal drilling thanks to its fully ground HSS‑G geometry. Fully ground HSS‑G for precise metal drilling 118° point angle for improved centring Hexagonal shank for secure torque transfer DIN 338 classification for short twist drills 30 mm flute, 80 mm overall length for extended reach Precise metalworking with reduced effort This fully ground HSS‑G tool offers a clear productivity advantage when machining metals. The CNC‑ground flute geometry produces sharp cutting edges and a high runout accuracy, so holes are cleaner and dimensional accuracy is improved. Because the cutter is ground rather than rolled, drilling can be up to 40% faster and requires significantly less feed force, which reduces operator effort and lowers tool wear during stationary or machine drilling. Reliable centring and clean hole starts The 118° point angle is chosen for easier centring and controlled penetration in softer to medium materials such as aluminium and many steels. This geometry helps to avoid wandering on curved or uneven surfaces and produces a consistent entry without excessive burr formation. For users who value reproducible starts and neat hole edges, the tip design of this tool contributes directly to a superior finishing result. Secure fastening and fast changeovers A hexagonal shank provides form‑fit torque transmission, minimising slippage in bit holders and quick‑change chucks. This design is particularly advantageous for cordless and impact drivers equipped for metal drilling, as it reduces the need for re‑clamping and speeds up workflow. The combination of hex shank and short‑length design follows the DIN 338 concept for short twist drills, enabling simple handling in both portable and stationary setups. Application profile and best uses Engineered primarily as a Drill for Metal, this tool is suited to alloyed and unalloyed steels, cast materials, sintered iron and many non‑ferrous metals, as well as hard plastics. The fully ground construction makes re‑grinding straightforward, while cooling and reduced chip adhesion are recommended for prolonged performance. For heavy or continuous cutting tasks, use with appropriate cooling and machine mounting to minimise risk of breakage. Who benefits from this specification Workshops and maintenance teams that need fast, accurate holes in metal will find this tool effective. The MetavCUT design targets machinists, fabrication professionals and service technicians who require quick bit swaps, precise hole location and the ability to drill a range of metallic materials without frequent tool replacement. The robust geometry and DIN 338 conformity support industrial usage and repeatable results. Strong recommendation: Choose the MetavCUT fully ground HSS‑G Twist Drill for precise metal drilling — for technical questions or to confirm suitability for your application, contact METAV Werkzeuge for competent advice via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill Brand: MetavCUT SKU: 57030‑FDA Diameter: 3 mm Point Angle: 118° Material: HSS‑G Execution: fully ground Flute Length: 30 mm Overall Length: 80 mm Shank Type: Hexagonal Colour: Silver For: Drilling Machine Norm: DIN 338 Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill, a Drill for Metal, is primarily applied when machining high‑strength materials and larger drill diameters. Its ground geometry is easy to re‑grind and withstands higher loads, enabling faster drilling rates and cleaner holes, which makes it especially suitable for alloyed and unalloyed steels, cast materials and hard plastics. Which three drill types exist? When considering drill categories, the main types are Metal drill, Wood drill and Stone/Concrete drill, and the MetavCUT Twist Drill belongs to the metal drill family designed for precise metalworking applications.
3mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Introducing Twist Drill (Spiralbohrer) — MetavCUT HSS‑G left‑cutting, Ø 3 mm, 135° (DIN 338) The Twist Drill (Spiralbohrer) is a left‑cutting HSS‑G Twist Drill for metal, designed for use with Drilling Machines and Hand Drills for extracting broken fasteners and drilling in hard materials. Left‑cutting design for extracting broken screws HSS‑G material for high wear resistance 135° point angle for harder materials Conforms to DIN 338 for short cylindrical shanks Faster penetration and less operator effort for metalworking This Twist Drill from the Profi Line uses HSS‑G to provide high wear resistance and consistent edge retention when machining alloyed and unalloyed Steel, Cast Steel, Gusseisen, Sintereisen, Temperguss, Non‑Ferrous Metals and hard Plastics. The material choice offers a reliable balance between toughness and hardness, so the drill maintains a sharp cutting geometry longer and reduces tool changes. Compliance with DIN 338 signals suitability for short cylindrical shank applications on stationary and portable machines. Left‑cutting geometry reduces feed force and aids screw extraction The left‑cutting grind is intended for use with a machine capable of left rotation and is particularly useful when removing broken or seized screws because the counter‑rotation often helps to turn the screw fragment out. Compared with conventional HSS drills the specially ground variant can enable up to 40% faster drilling and require about 50% less Feed Force, which lowers operator strain and improves cycle times on maintenance and repair jobs. 135° point angle improves centring and performance in tough alloys A 135° point angle produces a flatter tip that reduces walking and improves centring when starting holes in harder materials such as Stainless Steel. A larger point angle can shorten the initial dwell time required to enter the workpiece and helps distribute cutting forces over a broader area, which decreases the risk of tip deformation. For users unfamiliar with point geometries, this means fewer retries and cleaner hole profiles in demanding applications. Built for professionals and maintenance teams who need controlled results The Profi Line Twist Drill is aimed at metalworkers, fitters, maintenance technicians and toolrooms that require dependable performance for repair and production tasks. Produced under the DIN 338 classification, short Twist Drills with cylindrical shanks may be manufactured ground or roll‑formed; this makes them compatible with a wide range of Drilling Machines and Hand Drills. The drill is particularly effective when precise control and repeatable hole quality matter most. Choose the MetavCUT Twist Drill from the Profi Line for demanding metal applications — for expert technical advice and support contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 60030-FDA Diameter: 3 mm Point angle: 135° Execution: left‑cutting Material: HSS‑G Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine / Hand Drill Model series: Profi Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill (Spiralbohrer) used for? The MetavCUT Twist Drill is primarily applied to machining high‑strength materials and larger hole diameters. This Twist Drill design is well suited for alloyed and unalloyed Steel, Cast Steel, Gusseisen and similar materials; its shape is relatively easy to regrind and withstands substantial mechanical loads. Which three drill types exist? Typical drill categories are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drill group and is optimised for use on metalwork rather than masonry or timber. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑edge at the tip, which significantly lowers friction and therefore reduces the required feed forces. For the MetavCUT Twist Drill this improves centring and cutting efficiency so the tip stays better aligned in the workpiece. Can the MetavCUT Twist Drill be used to drill wood? A Metal drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish will be inferior compared with purpose‑made wood drills. Metal drills are easier to resharpen and have a lower self‑feed tendency, which can be an advantage for controlled hole work in softer materials. For which drilling depths is the Twist Drill most commonly used? A solid‑bore hole is typically produced with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool in metalworking operations. Is HSS better than HSSE? The widespread assumption that HSSE steels are always superior to standard HSS is not universally correct. When choosing between HSS and HSSE for the MetavCUT Twist Drill, evaluate whether the specific work conditions justify the higher cost of HSSE.
3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Spiralbohrer – kurzer HSS-Bohrer 3 mm von MetavCUT Der Spiralbohrer ist ein kurzer HSS-G Bohrer aus der Basic Line für präzise Metallbohrungen in Werkstatt und Montage Spiralbohrer 3 mm von MetavCUT HSS-G geschliffen für schnelle Zerspanung 135° Spitzenwinkel für harte Werkstoffe DIN 338 kurz für stabile, präzise Bohrungen Zylinderschaft geeignet für Handbohrmaschinen Stabile Kurzform für präzise Metallbohrungen Die kurze Ausführung reduziert die Auskragung und erhöht die Stabilität beim Bohren, wodurch sich Verkantungen und Durchbiegungen deutlich verringern. Durch die Bauform nach DIN 338 eignet sich der Bohrer besonders für stationäre und handgeführte Anwendungen, bei denen Präzision gefragt ist. Diese Konstruktion macht den Bohrer zur ersten Wahl, wenn enge Toleranzen und saubere Bohrkanten in Stahl und Guss verlangt werden. HSS-G geschliffen: schneller und mit weniger Kraftaufwand Dank der HSS-G-Ausführung werden Bohrungen bis zu 40 % schneller möglich, während die benötigte Anpresskraft um etwa 50 % sinkt. Das Ergebnis ist eine wirtschaftlichere Bearbeitung besonders in legierten und unlegierten Stahlarten sowie in Gusseisen und Temperguss. Die geschliffene Oberfläche der Spiralnuten sorgt zusätzlich für gleichmäßigen Spanabtransport und verlängert die Standzeit bei kontinuierlichem Einsatz. Geeignet für Werkstatt, Montage und handgeführte Maschinen Mit einem Durchmesser von 3 mm fällt der Bohrer in den Standard-Bereich und ist vielseitig einsetzbar: dünne bis mittlere Bleche, Profile und allgemeiner Maschinenbau. Die Zylinderschaft macht den Einsatz in Handbohrmaschinen unkompliziert, während die kurze Länge Vibrationen minimiert und die Handhabung erleichtert. Anwender profitieren von einer ausgewogenen Kombination aus Agilität und Robustheit. Anwendungshinweise für lange Standzeit und sichere Ergebnisse Ein Spitzenwinkel von 135° ist optimal für härtere Werkstoffe wie Edelstahl, weil er das Anbohren erleichtert und die Anfahrrate reduziert. Bei tieferen Bohrungen empfiehlt sich das zyklische Ausstoßen der Späne oder das Verwenden von Kühlschmierstoff, um Verstopfungen zu vermeiden. Für Präzisionsbohrungen sollte vorgezcentriert oder mit einem Zentrierbohrer angestochen werden, um ein Wandern des Bohrers zu verhindern. Bestellen Sie den Spiralbohrer der Basic Line von MetavCUT über eMail (info@metav-werkzeuge.com), Telefon (+49 2822 7131930) oder per WhatsApp (+49 170 2837271) und sichern Sie sich geprüfte Präzision für Ihre Werkbank Produkteigenschaften Artikelnummer: 27030-FDA Hersteller: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Basic Line Norm: DIN 338 Ausführung: kurz Daten Durchmesser: 3 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen Typ: Typ N (Normalspirale) Für: Handbohrmaschine Farbe: blank (bright finished) FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer aus der Basic Line mit HSS-G eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe; die geschliffene Ausführung verbessert dabei die Spanabfuhr. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Spiralbohrer 3 mm verfügt über einen Zylinderschaft und ist ausdrücklich für den Einsatz in Handbohrmaschinen vorgesehen, wobei die kurze Ausführung für mehr Stabilität sorgt. Welche Vorteile bietet der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert das Abkippen beim Anbohren in harten Werkstoffen wie Edelstahl und verkürzt die Anbohrzeit, was besonders bei der Serienbearbeitung von Vorteil ist. Wie lange hält der Bohrer bei normaler Werkstattnutzung? Die Standzeit hängt von Werkstoff, Schnittbedingungen und Kühlung ab; der geschliffene HSS-G Bohrer von MetavCUT bietet aufgrund verbesserter Spanabfuhr und geringerer Anpresskraft eine deutlich verbesserte Lebensdauer gegenüber ungeschliffenen Ausführungen. In welcher Verpackungseinheit wird der Bohrer geliefert? Geliefert wird der Spiralbohrer in der Verpackungseinheit von 10 Stück, SKU 27030-FDA, ideal für Werkstätten und Montageeinsätze.
3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Nutzen Sie die hohe Stabilität und die deutlich reduzierte Anpresskraft dieses Spiralbohrers für präzise Metallbearbeitung. Die Kombination aus HSS-G-Material, kurzer Ausführung und 135°-Spitzenwinkel ermöglicht schnelle, saubere Bohrungen in Stahl und Gusswerkstoffen. Bestellungen und Fachberatung laufen über Metav als zuverlässigen Partner mit Standort Emmerich. Spiralbohrer 3 mm HSS-G, kurz »Profi Line« von MetavCUT Der Spiralbohrer 3 mm von MetavCUT für präzise Metallbearbeitung in kurzer Ausführung und hoher Stabilität. Kurze Ausführung für höhere Stabilität und Genauigkeit Geschliffen nach DIN 338 für saubere Bohrbilder HSS-G Material für Legierungs- und Baustähle geeignet 135° Spitzenwinkel für schwerere Werkstoffe Verpackungseinheit 10 Stück Höhere Effizienz durch kurze Bauform und geschliffene Geometrie Die kurze Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren. Durch den CNC-Schliff der Spannuten ergibt sich eine sehr hohe Rundlaufgenauigkeit und ein sauberes Bohrbild, was Nacharbeit minimiert. Für Werkstätten bedeutet das weniger Ausfallzeiten und eine höhere Wirtschaftlichkeit bei Serien- wie Einzelteilen. Materialvorteile und Leistungsprofil für harte Werkstoffe Der Einsatz von HSS-G sorgt für Wärmebeständigkeit und Zähigkeit beim Bohren in legierten und unlegierten Stählen, Gusseisen sowie Nichteisenmetallen. Dank der geschliffenen Schneidkante lässt sich bis zu 40 % schneller bohren und es wird 50 % weniger Anpresskraft benötigt als bei herkömmlichen HSS-Bohrern, was die Maschinenbelastung reduziert. Präzision und Anwendungsempfehlung für den Alltag Mit einem Durchmesser von 3 mm liegt der Bohrer im Standard-Bereich und eignet sich besonders für Handwerk, Montage und Werkstattarbeiten. Vorbohren bei dünnen Blechen ist in der Regel nicht notwendig, bei höherer Präzision empfiehlt sich jedoch ein Anpünktchen. Die kurze Ausführung ist ideal für stationäre und handgeführte Bohrmaschinen gleichermaßen. Kompatibilität, Spitzenwinkel und Schneidverhalten Der 135°-Spitzenwinkel ist auf härtere Werkstoffe abgestimmt und verkürzt die Anbohrphase, wodurch Verkantungen reduziert werden. Die geschliffene Schaftausführung sorgt für präzise Spannung im Bohrfutter und minimiert Rundlauffehler. Für tiefe Sacklochbohrungen oder sehr zähe Materialien sind spezialisierte Verfahren und Kühlung zu empfehlen. Zielgruppe und Einsatznutzen für professionelle Anwender Entwickelt für Industrie, Instandhaltung und anspruchsvolle Handwerker, bietet dieser Spiralbohrer eine Kombination aus Robustheit, Präzision und Produktivität. Die Profi Line-Ausführung von MetavCUT ist die Wahl für Anwender, die saubere Bohrlöcher und konstante Ergebnisse in Stahl und Guss erwarten. Empfehlung: Setzen Sie auf die MetavCUT Profi Line für präzise Metallbohrungen und fordern Sie bei Bedarf technische Details über info@metav-werkzeuge.com oder Telefon +49 2822 7131930 an Produktmerkmale Artikelnummer: 48030-FDA Bezeichnung: Spiralbohrer Marke: MetavCUT Serie: Profi Line Daten Durchmesser: 3 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Norm: DIN 338 Schaftausführung: geschliffen Typ: Typ N Ausführung: kurz Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT aus HSS-G mit 135°-Spitzenwinkel ist für härtere Werkstoffe wie Edelstahl besser geeignet als ein Standardwinkel; empfohlen wird auf jeden Fall geeignete Kühlung und angepasste Schnittgeschwindigkeit. Welche Maschinen sind optimal für diesen Bohrer? Die kurze Ausführung ist kompatibel mit stationären Säulenbohrmaschinen und handgeführten Bohrmaschinen; die Profi Line-Geometrie reduziert Rundlauffehler und eignet sich daher auch für empfindlichere Bohrarbeiten. Wie wirkt sich die geschliffene Ausführung auf die Lebensdauer aus? Geschliffene Spiralbohrer liefern sehr scharfe Kanten und präzise Bohrlöcher, können aber empfindlicher gegen Bruch sein; bei Verwendung in der Werkstatt werden konstante Vorschubgeschwindigkeit und Kühlung empfohlen, um Lebensdauer und Schnittbild zu optimieren. Worin unterscheidet sich die kurze Ausführung von Standardbohrern? Die kurze Ausführung bietet eine geringere Auskraglänge, höhere Stabilität und weniger Neigung zum Verbiegen, was zu präziseren Ergebnissen in Metallanwendungen führt. MetavCUT hat diese Ausführung speziell für anspruchsvolle Metallbearbeitung konzipiert. Ist dieser Bohrer für Handbohrschrauber geeignet? Ja, im Rahmen üblicher Anwendungen ist der Bohrer für Handbohrmaschinen geeignet; für große Serien in gehärtetem Stahl sind jedoch spezialisierte Vollhartmetallwerkzeuge wirtschaftlicher.
3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill (Short) – 3 mm | 118° | TiN-coated | HSS-G | DIN 338 The Twist Drill is a short HSS-G metalworking drill designed for Drilling Machines, offering a TiN-coated surface, a 118° tip and a fully ground shank for stable, precise metal drilling. Short design for higher stability and precision TiN-coated surface for extended tool life HSS-G fully ground for faster, cleaner cuts 118° tip for improved centring on curved surfaces Precision and Durability for Metalworking Deriving strength from HSS-G material, this Twist Drill combines a TiN-coated surface with a fully ground geometry to reduce friction and extend tool life when machining metal. The TiN layer lowers wear at the cutting edges and supports longer cutting intervals, especially when a suitable cooling system is used. Anwenders profitieren von saubereren Bohrlöchern und einer längeren Standzeit des Werkzeugs, da die Beschichtung Reibung und Verschleiß deutlich verringert. Short Design for Stable, Accurate Results Die kurze Ausführung des Bohrers minimiert die überstehende Auskraglänge und erhöht so die Stabilität beim Bohren; das reduziert Vibrationen und verbessert den Rundlauf. Dadurch sind präzise Bohrungen in harten Materialien möglich. Zudem ermöglicht die geschliffene Ausführung ein bis zu 40 % schnelleres Bohren und benötigt dabei bis zu 50 % weniger Anpresskraft, was das Arbeiten mit stationären oder leichten mobilen Maschinen deutlich erleichtert. Ideal für anspruchsvolle Metallanwendungen Dieser Twist Drill ist speziell für das Bearbeiten von Metallen ausgelegt und eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze sowie Hartkunststoff. Die Ausführung nach DIN 338 signalisiert, dass es sich um einen kurz konstruierten Spiralbohrer mit Zylinderschaft handelt, wie er für Dreh- und Bohrmaschinen typisch ist. Nutzer erhalten ein Werkzeug, das für robuste Materialklassen konzipiert ist und wiederholbar präzise Ergebnisse liefert. Practical Tips for Best Performance Für bestmögliche Ergebnisse beim Einsatz des Twist Drill empfiehlt sich die Verwendung von Kühlschmierstoff, insbesondere bei der Bearbeitung von Stahl und Guss, um Hitzeentwicklung und Werkzeugverschleiß zu minimieren. Die 118° tip sorgt für einfaches Zentrieren auf flachen oder leicht gewölbten Oberflächen; bei sehr harten Werkstoffen kann ein kleinerer Spitzenwinkel nötig sein. Verwenden Sie geeignete Drehzahlen und Bohrwerte entsprechend Werkstoff und Durchmesser, um Bruchgefahr zu reduzieren und die Standzeit zu maximieren. MetavCUT recommends this Twist Drill for precise metalworking; for expert advice or additional technical data please contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications Twist Drill Marke: MetavCUT SKU: 28030-FDA Diameter: 3 mm Overall Length: 61 mm Spiral (Flute) Length: 33 mm Tip Angle: 118° Execution: Short Shank Finish: Fully ground Coating/Colour: TiN-coated Material: HSS-G Standard: DIN 338 Suitable for: Drilling Machine, Metalworking Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill from MetavCUT is mainly applied when machining high‑strength materials and larger diameters; its short, robust form is easier to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which 3 drill types exist? Commonly distinguished drill types are: Metal drill, Wood drill, Masonry/Concrete drill.
3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short, 3 mm, 135° tip, TIN-coated, HSS‑G, DIN 338 A Twist Drill (Type N) from MetavCUT for precise metal drilling with a short design suited to drilling machines. Short design for improved stability TIN-coated for extended tool life 135° tip angle for hard metals Fully ground HSS‑G for precise holes Conforms to DIN 338 for short twist drills Precision and durability that improve metalworking results The MetavCUT Twist Drill combines a 3 mm diameter with a 135° tip angle and a short overall length to deliver high precision when machining hard materials. The HSS‑G material and fully ground flute geometry enable sharp cutting edges and consistent concentricity, which produce cleaner holes and reduce wobble. This design reduces required feed forces and supports stable drilling on both stationary and portable drilling machines, making it well suited for professional metalworking tasks. Short length for greater stability and accuracy A shorter working length reduces overhang and thus vibration, which directly improves hole quality in demanding operations. The short configuration of this Type N twist drill increases stiffness and lowers the risk of deflection when drilling alloys, cast iron or tempered steels. For operators, this means fewer rejected parts and less rework, especially when precise hole position and diameter tolerance are critical in assemblies and components. Coating and material explained — longer lifetime under load The TiN coating (TIN‑coated) provides a hard, low-friction surface that reduces wear and heat buildup during metal cutting. When combined with HSS‑G construction, the coating extends tool life and maintains sharpness, especially under intermittent cooling or light lubrication. For users unfamiliar with the term, HSS‑G refers to high‑speed steel that has been ground (G) to produce very sharp cutting edges and high concentric accuracy, which is particularly beneficial for drilling small diameters such as 3 mm. Application advice and practical use cases This short Type N twist drill is designed primarily for metal: alloyed and unalloyed steel, cast iron, sintered metals, copper, bronze and hard plastics. The 135° tip angle shortens the initial penetration time for harder materials and improves centring. Use with appropriate coolant or cutting fluid for best wear performance, and prefer steady clamping and minimal overhang to exploit the stability advantages of the short design. For handheld drilling machines, ensure the chuck grip is secure and use steady feed to avoid breakage. Who benefits most from this tool Engineers, machinists and maintenance technicians who require repeatable, precise holes in metal parts will find the short Twist Drill especially valuable. The combination of fully ground geometry and TiN coating supports applications where hole quality matters — toolrooms, small-batch fabrication and repair workshops. The tool is also suitable for use in production where short, accurate drill cycles reduce scrap and improve throughput. Strongly recommended: choose the MetavCUT Twist Drill Type N for demanding metal drilling tasks thanks to its short, stable design and TiN coating — for personal technical advice or further specifications contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 46030-FDA Diameter: 3 mm Overall length: 61 mm Spiral length: 33 mm Tip angle: 135° Type: Type N Material: HSS‑G Coating/Colour: TIN-coated Shank execution: fully ground Execution: short Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill from MetavCUT, Type N, is primarily used for machining high‑strength materials and larger bore diameters. The geometry of this short, fully ground HSS‑G drill allows relatively easy regrinding and withstands higher mechanical loads, making it suitable for demanding metalworking operations where durability and sharpness are required. Which three drill types are there? When selecting drills, the main categories are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill (Type N) falls into the Metal drills category and is optimised for steel, cast iron and other non‑ferrous metals.
3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Profitieren Sie von der Kombination aus HSS-G-Qualität, TiN-Beschichtung und kurzer Ausführung für präzise Metallbohrungen; die geschliffene Geometrie reduziert Anpresskraft und erhöht die Standzeit. Bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 3 mm | MetavCUT Profi Line (kurz, HSS‑G) Der Spiralbohrer in kurzer Ausführung für präzise Metallbohrungen an Hand- und stationären Maschinen. Kurze Ausführung für höhere Stabilität TiN-Beschichtung für längere Standzeit HSS‑G geschliffen für präzise Bohrlöcher 135° Spitzenwinkel für harte Werkstoffe DIN 338, Zylinderschaft für Maschinenbetrieb Mehr Standzeit durch Material und Beschichtung Dank der HSS‑G-Werkstoffwahl und der TiN-Beschichtung profitieren Anwender von erhöhter Verschleißfestigkeit und reduzierter Reibung beim Bohren von Metall. Die Beschichtung verringert Wärmeentwicklung und erleichtert Spanabfuhr, wodurch sich die Lebensdauer des Werkzeugs messbar erhöht. Dies ist besonders relevant bei häufigen Serienarbeiten oder bei Bohrungen in legierten Stählen, weil sich die Gesamtbetriebskosten dadurch verringern und weniger Werkzeugwechsel nötig werden. Fachbegriffe wie HSS‑G (geschliffen) und TiN (Titan‑Nitrid) stehen damit für greifbare Vorteile in der Werkstatt. Stabilität und Präzision bei Metallarbeiten Die kurze Auskraglänge reduziert Vibrationen und Verwindung, sodass die Bohrung sauberer und geradliniger wird. Durch die geschliffene Schaft‑ und Spiralengeometrie entsteht eine hohe Rundlaufgenauigkeit, was besonders bei anspruchsvollen Bohrungen in Gusseisen und gehärteten Materialien wichtig ist. Die Kombination aus kurzer Bauform und Stabilität sorgt dafür, dass deutlich weniger Nacharbeit anfällt und die Bohrung schneller ins Maß gebracht werden kann. Geeignete Anwendungen und Maschinen Typische Einsätze liegen im Standard‑Bereich für Metallbohrer: Werkstatt, Montage und DIY‑Projekte sowie stationäre Säulenbohrmaschinen und Handbohrmaschinen. Dieses Werkzeug ist speziell für das Bohren in legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetallen wie Kupfer und Bronze geeignet. Für das Durchführen sauberer Bohrungen an Handmaschinen empfiehlt sich dennoch sorgfältiges Anpunkten, um ein „Wandern“ beim Anbohren zu vermeiden und die Genauigkeit zu steigern. Praxistipps für lange Nutzungsdauer und sichere Ergebnisse Für optimale Ergebnisse empfiehlt sich der Einsatz von Kühlmittel bei Stahlbearbeitung, moderater Vorschub und angepasste Drehzahlen. Der 135° Spitzenwinkel reduziert das Auflaufen auf harten Oberflächen und erleichtert das Anbohren bei zähen Werkstoffen. Bei sehr präzisen Passungen hilft ein kurzes Vorbohren mit Zentrierbohrer. Bei stationärem Einsatz erhöht sich die Zuverlässigkeit weiter, weil die Sprödigkeit geschliffener Bohrer durch bessere Kühlung und stabile Aufnahme kompensiert wird. Bestellen Sie den MetavCUT Profi Line Spiralbohrer für präzise Metallbearbeitung direkt über Metav und lassen Sie sich bei technischen Fragen persönlich beraten unter info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 41030-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Ausführung: kurz Daten Durchmesser: 3 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (geschliffen) Farbe: TIN‑beschichtet (Titan‑Nitrid) Schaftausführung: geschliffen Norm: DIN 338 Typ: Typ N Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Verpackungseinheit: 10 FAQ Für welche Werkstoffe ist dieser Bohrer geeignet? Der MetavCUT Profi Line Spiralbohrer (Typ N, SKU 41030-FDA) eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer, Bronze und Neusilber; bei Hartkunststoff sind ebenfalls gute Ergebnisse möglich. Kann ich den Bohrer mit einer Handbohrmaschine verwenden? Ja, der Spiralbohrer von MetavCUT (Profi Line, SKU 41030-FDA) ist für Handbohrmaschinen geeignet; wegen der kurzen Ausführung empfiehlt sich jedoch sauberes Anpunkten für höhere Präzision. Wie verlängere ich die Standzeit des Bohrers? Wählen Sie passende Drehzahl, moderaten Vorschub und eine Kühlmittelzufuhr; die TiN‑Beschichtung des MetavCUT Profi Line Spiralbohrers (41030-FDA) reduziert Reibung und trägt so zur längeren Standzeit bei. Was bedeutet die DIN 338 Kennzeichnung für dieses Produkt? Die Norm DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft; der MetavCUT Profi Line Spiralbohrer (Typ N, SKU 41030-FDA) erfüllt diese Klassifikation und steht damit für definierte Abmessungen und Fertigungsqualität. Worin unterscheidet sich ein geschliffener HSS‑Bohrer von einem gewalzten? Geschliffene HSS‑Bohrer wie der MetavCUT Profi Line (41030-FDA) bieten schärfere Schneiden und höhere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; sie sind jedoch empfindlicher und profitieren von stationärer Aufnahme und Kühlung.
3mm HSS-G Twist Drill DIN 338 - MetavCUT
Der Spiralbohrer überzeugt durch seine Kombination aus schneller Spanabfuhr und hoher Anbohrstabilität; die HSS‑G-Ausführung und der 135° Spitzenwinkel reduzieren Anpresskraft und ermöglichen effiziente, gratfreie Bohrungen in Stahl und Gusseisen. Nutzen Sie die Präzision und Robustheit für produktive Metallbearbeitung und bestellen Sie direkt über Metav oder kontaktieren Sie unsere Beratung bei Bedarf. Spiralbohrer (HSS‑G) von MetavCUT Der Spiralbohrer ist ein geschliffener HSS‑G Kurzspiralbohrer nach DIN 338 für präzise Metallbohrungen an Handbohrmaschinen und stationären Werkzeugmaschinen. HSS‑G für hohe Verschleißfestigkeit 135° Spitzenwinkel für härtere Werkstoffe Bis zu 40 % schnellere Bohrleistung Geeignet für Handbohrmaschine und stationäre Maschinen Norm DIN 338, kurze Spiralbohrer Schnelleres Bohren mit weniger Anpresskraft für effiziente Abläufe Dank der speziell geschliffenen Schneide ermöglicht der Bohrer einen deutlich schnelleren Bohrfortschritt bei reduziertem Kraftaufwand. Dieses Merkmal sorgt für geringere Ermüdung der Maschine und längere Standzeiten der Werkzeuge, was die Effizienz in Werkstatt und Produktion steigert. Anwender profitieren von saubereren Lochrändern und kürzeren Bearbeitungszeiten bei dünnen bis mittleren Blechen und Profilen. Präzision beim Anbohren und saubere Lochränder für hochwertige Ergebnisse Die W‑Spitze und der definierte Spitzenwinkel reduzieren das Wandern beim Anbohren und führen zu gratarmen Ergebnissen. Dadurch werden Nacharbeit und Entgraten minimiert, was besonders bei nachfolgenden Passungen und Montageprozessen Zeit spart. Diese Eigenschaft ist besonders vorteilhaft beim Bohren in legierten und unlegierten Stählen sowie in Gusseisen. Vielseitigkeit in der Materialbearbeitung und robustes Design Als Kurzspiralbohrer nach DIN 338 ist dieses Werkzeug für eine breite Palette von Materialien geeignet: Stahl, Gusseisen, Aluminium, Buntmetalle und technische Kunststoffe. Die HSS‑G-Legierung bietet eine gute Balance aus Zähigkeit und Verschleißfestigkeit, wodurch der Bohrer sowohl für einfache Werkstattaufgaben als auch für anspruchsvollere Montagearbeiten geeignet ist. Anwendungsempfehlung und Maschinenkompatibilität für sichere Prozesse Für handgeführte Akkubohrschrauber und stationäre Säulenbohrmaschinen liefert der Bohrer zuverlässige Ergebnisse. Bei einem Durchmesser von 3 mm empfiehlt sich bei Bedarf das Anpunkten mit einem Zentrierbohrer zur Erhöhung der Rundlaufgenauigkeit. So werden Verkantungen vermieden und die Standzeit weiter erhöht. Profitieren Sie von schnellerem Bohren mit dem HSS‑G Bohrer von MetavCUT – Beratung und Bestellung über Metav: info@metav-werkzeuge.com · Tel. +49 2822 7131930 · WhatsApp +49 170 2837271 Produkteigenschaften Artikelnummer: 55030-FDA Marke: MetavCUT Serie: Spezial Bezeichnung: Spiralbohrer Norm: DIN 338 Fakten Durchmesser: 3 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (Schnellarbeitsstahl, geschliffen) Schaft Ausführung: mit W‑Spitze, ohne 3‑Kantschaft Anwendung: Bohrer für Metall Geeignet für: Handbohrmaschine, stationäre Maschinen FAQ Ist der Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS‑G und mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe; bei rostfreiem Stahl kann die Standzeit geringer sein als bei speziellen HSS‑Co Typen. Welche Maschine passt am besten zu diesem Bohrer? Für den 3 mm Bohrer empfiehlt sich die Nutzung an einer Handbohrmaschine oder einer stationären Säulenbohrmaschine; die Ausführung entspricht DIN 338 für kurze Spiralbohrer. Wie erhöht man die Präzision beim Anbohren? Punktieren mit einem Zentrierbohrer und stabile Spannmittel reduzieren Wandern; der geschliffene Bohrerspitzenwinkel unterstützt ein sauberes Anbohren. Woraus besteht der Bohrer und was bedeutet das für die Anwendung? Der Bohrer besteht aus HSS‑G, was eine gute Kombination aus Zähigkeit und Verschleißfestigkeit bietet und ihn für Stahl, Gusseisen und Nichteisenmetalle geeignet macht. Welche SKU hat dieses Produkt für Nachbestellungen? Die Artikelnummer lautet 55030-FDA; Bestellungen und technische Rückfragen können über Metav oder direkt per E‑Mail an info@metav-werkzeuge.com gestellt werden.
3mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G Twist Drill, 3 mm, 135° point, Bright Finished, Fully Ground, DIN 340 The Twist Drill long HSS‑G is a precision drill for metalworking, designed for deep holes and use with a Drilling Machine. Long design for deeper or hard-to-reach holes 3 mm Diameter for precise pilot holes 135° Point angle for harder materials Fully ground shank for high concentricity Conforms to DIN 340 for industrial applications High‑performance material for demanding metalwork The Twist Drill uses HSS‑G (high‑speed steel, ground) to combine cutting performance with durability when machining tough metals. This material allows up to 40% faster drilling compared with conventional HSS in many applications and typically requires less feed force, which reduces operator strain and wear on the machine. The 135° point angle is optimised for harder materials such as stainless steel, shortening initial plunge time and improving centring on difficult surfaces. Long execution for deep bores and restricted access The long execution follows DIN 340 dimensions, providing extra overall length and extended spiral length for deep holes or recessed drilling positions. The extended geometry is ideal when the bore is set back from the workpiece edge or when using jigs that limit accessibility. Because the flute geometry is fully ground, concentricity and hole quality are improved, producing clean, precise bores suitable for finishing or reaming. Optimised geometry and handling recommendations A fully ground flute geometry delivers sharp cutting edges and excellent roundness, which benefits accuracy in demanding metalworking tasks. Operators should note that ground HSS drills can be more brittle than rolled types and therefore are best used with steady machine support and adequate cooling for long runs. Re‑sharpening restores edge geometry; therefore the tool can be maintained economically in a workshop environment. Intended users and typical applications This Twist Drill is aimed at professional workshops, toolrooms and industrial users who require reliable performance when drilling in legied and unlegied steels, cast irons and non‑ferrous metals. It is suitable for use in a Drilling Machine and for stationary applications where high concentricity and hole quality are priorities. For occasional handheld use, ensure the drill is clamped securely and run at appropriate speeds with coolant. We recommend the MetavCUT Twist Drill for deep metal drilling — for expert guidance and to confirm suitability for your application contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical details Designation: Twist Drill Brand: MetavCUT SKU: 53030-FDA Diameter: 3 mm Point angle: 135° Execution: long Finish/Colour: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 340 Spiral length: 66 mm Total length: 100 mm For use with: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for and which materials suit it best? The Twist Drill from MetavCUT (Twist Drill) is primarily applied to machining high‑strength materials and larger bore diameters; it performs well in alloyed and unalloyed steel, cast iron varieties and non‑ferrous metals, offering robust cutting action for demanding metalwork. Is the MetavCUT Twist Drill suitable for deep holes and recessed bores? Yes, the Twist Drill by MetavCUT is a long execution conforming to DIN 340, designed for deeper bores and situations where the drill must reach further into the workpiece than a standard length would allow. What are Twist Drills mainly used for? Twist Drills are mainly used when machining high‑strength materials and larger diameters; their form is easy to grind and they withstand higher loads. Which three drill types exist? The three principal drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the chisel edge at the tip of the Twist Drill, significantly lowering friction and therefore feed forces, while improving the drill’s ability to centre in the workpiece. Can metal Twist Drills be used for drilling wood? Metal drills can be used in wood but offer inferior guidance and a less clean finish; they are easier to re‑grind and have a reduced self‑feeding tendency compared with wood‑specific drills. For which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is often executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The general view that HSSE steels are categorically superior to standard HSS is incorrect; assess working conditions carefully to decide whether the higher cost of HSSE is justified for your application.
4.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — 4.1 mm, 118° Point Angle, Short HSS Drill by MetavCUT (Black, DIN 338) The Twist Drill Type N is a short High Speed Steel Metal Drill with a 4.1 mm Diameter and a 118° Point Angle, designed for precise work in Drilling Machines and handheld drilling applications. Short HSS design for improved stability Conforms to DIN 338 for short spiral drills 118° point for reliable centring on many metals Type N Normal Spiral for general metalworking Black finish with 75 mm overall length Exceptional Precision and Stability for Metalworking The short HSS construction of this Twist Drill provides higher stability and reduced tendency to bend compared with longer drills. With a 4.1 mm Diameter and a Spiral Length optimised to DIN 338, this geometry reduces run-out and vibration when used in a Drilling Machine or a Hand Drill, resulting in cleaner Holes and extended Tool Life. For professionals and hobbyists who demand repeatable accuracy, the compact form factor improves concentricity and simplifies alignment at the workpiece. Material Properties and What 118° Means for Your Work Made from HSS (High Speed Steel), this short Twist Drill resists heat and wear during standard metal drilling tasks. The 118° Point Angle offers a balanced penetration profile that eases centring on curved or mild surfaces and reduces walking on sheet materials, while still delivering efficient cutting in unalloyed and alloyed steels, cast iron, non-ferrous Metals and Plastics. The result is lower risk of Breakage on small diameters and reliable hole quality for through-drilling operations. Practical Applications and Who Benefits Most This Twist Drill Type N is intended primarily for drilling metal: workshops, maintenance departments and industrial users performing repair or fabrication tasks will appreciate the short design for confined setups. The tool suits both stationary and portable Drilling Machine use and is particularly effective when drilling diameters under typical hand-operated feed forces. Users seeking an uncomplicated, durable solution for everyday metalworking find this drill a practical choice. Why MetavCUT’s Short Twist Drill Stands Out Conforming to DIN 338, the short configuration of this Twist Drill emphasises precision and reduced deflection, which is crucial for repeatable results in production or repair work. The Type N Normal Spiral is a proven standard for general metal drilling and can be reground more easily than complex geometries. If you need tailored advice on whether the short HSS variant is the right solution for a specific material or machine, METAV Werkzeuge provides competent, detailed consultation to help you select the correct tool and operating parameters. Strongly recommend MetavCUT's short HSS Twist Drill Type N for precise metal drilling — for expert advice or technical questions contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 40041-FDA Diameter: 4.1 mm Point Angle: 118° Type: Type N Execution: Short Colour: Black Material: HSS Spiral Length: 43 mm Overall Length: 75 mm Application: Drills for metal For Drill Machine: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The Twist Drill (MetavCUT, Type N) is primarily applied to the machining of high-strength materials and larger drilling diameters in metalworking; its classic spiral form allows straightforward resharpening and reliable performance under higher loads. Which three drill types exist? Common drill categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill (Type N) belongs to the Metal Drill group and is optimised for steel and similar materials. Why are Twist Drills pointed (split-point or sharpened)? The tip geometry reduces the cross-cut at the drill point, which significantly lowers friction and the required feed force; the Twist Drill (MetavCUT, Type N) benefits from this by achieving better centring and easier penetration with reduced walking. Can the Twist Drill (MetavCUT, Type N) be used in wood? A Metal Drill such as the Twist Drill (MetavCUT, Type N) can be used in Wood, but guidance is inferior and the hole finish will be less clean compared with dedicated Wood Drills; however, these drills are easier to regrind and exhibit lower self-feeding tendencies. For which drilling depths is the Twist Drill mostly used? Solid through-holes are commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool, and the short variant offers higher stability for many workshop operations. What is better, HSS or HSSE? The assumption that HSSE is categorically superior to HSS is not always correct; when choosing between HSS and HSSE for the Twist Drill (MetavCUT, Type N), evaluate the working conditions carefully to determine whether the higher cost of HSSE is justified by the specific application.
4.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Profitieren Sie von der Kombination aus kurzer Ausführung für erhöhte Stabilität, HSS‑E mit 5% Kobaltlegierung für mehr Verschleißfestigkeit und dem 135° Spitzenwinkel für bessere Anbohrleistung in harten Werkstoffen; bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei Bedarf. Spiralbohrer 4,1 mm (HSS‑E) – MetavCUT Standard Line Der Spiralbohrer in kurzer Ausführung ist für präzise Metallbohrungen konzipiert und eignet sich besonders für legierten und unlegierten Stahl sowie für Gusseisen und Nichteisenmetalle. Kurze Ausführung für höhere Stabilität HSS‑E mit 5% Kobaltlegierung für längere Lebensdauer Geschliffene Schaftausführung für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für sicheres Anbohren harter Werkstoffe Geeignet für Handbohrmaschine und stationäre Bohrarbeiten Präzise Leistung für den Alltag in Werkstatt und Montage Die kurze Ausführung dieses Bohrers reduziert die Auskraglänge und minimiert damit Vibrationen sowie Verbiegen, was zu saubereren Bohrlöchern und höherer Maßhaltigkeit führt. Durch die Kombination aus geschliffener Geometrie und optimiertem Schneidwinkel entsteht eine sehr gute Rundlaufgenauigkeit, die sich in präzisen Ergebnissen bei Serien- und Einzelfertigung niederschlägt. Für Anwender bedeutet das weniger Nacharbeit und eine verlässlichere Prozessqualität. Materialkompetenz und Fertigungsverfahren für harten Einsatz Gefertigt aus HSS‑E (Schnellarbeitsstahl mit Kobalt) und mit 5% Kobaltlegierung, bietet dieser Bohrer verbesserte Warmfestigkeit und Zähigkeit gegenüber herkömmlichem HSS. Die geschliffene Herstellung sorgt für scharfe Schneiden und saubere Spanführung, was besonders beim Bohren in harten Werkstoffen wie Edelstahl oder legiertem Stahl von Vorteil ist. Die Einordnung nach DIN 338 bestätigt die Ausführung als kurzer Spiralbohrer mit Zylinderschaft. Praxiseinsatz, Maschinenkompatibilität und Verarbeitungshinweise Der Durchmesser von 4,1 mm liegt im Standard‑Bereich, somit eignet sich der Bohrer sowohl für Handgeführte Akkubohrschrauber als auch für stationäre Säulenbohrmaschinen. Im Vergleich zu langen Bohrern bietet die kurze Bauform deutlich bessere Stabilität; das verringert Bruchrisiken besonders bei kleinen Durchmessern. Für saubere Ergebnisse bei Metall empfiehlt sich der Einsatz von Kühlschmierstoff und moderatem Vorschub, Schraubfutter fest anziehen und Rundlauf prüfen. Handling, Vorsichtsmaßnahmen und Zielgruppe Für Anwender im Maschinenbau, in der Instandhaltung und im Handwerk ist dieser Bohrer eine wirtschaftliche Wahl, wenn es um zuverlässige Metallbearbeitung geht. Bei Bohrungen über das Fünffache des Durchmessers oder bei extrem zähen Werkstoffen sind abgestufte Vorgehensweisen zu wählen. Kleine Durchmesser wie 4,1 mm profitieren von hoher Drehzahl und kontrolliertem Vorschub; das reduziert Spanaufbau und verlängert die Lebensdauer des Werkzeugs. Setzen Sie auf die MetavCUT Standard Line und fordern Sie eine persönliche Beratung per info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 an, um die passende Ausführung für Ihre Anwendung zu wählen. Produktmerkmale Artikelnummer: 47041-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Daten Durchmesser: 4,1 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑E — Schnellarbeitsstahl mit Kobalt Schaftausführung: geschliffen — CNC‑Schliff für hohe Rundlaufgenauigkeit Farbe: 5% kobaltlegiert Ausführung: kurz — reduzierte Auskraglänge für Stabilität Typ: Typ N — Normalspirale, klassischer Metallbohrer Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich der Bohrer besonders gut? Der Spiralbohrer von MetavCUT (Standard Line, SKU 47041-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; die Kombination aus HSS‑E und 5% Kobaltlegierung erhöht die Standzeit beim Bohren in harten Materialien. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, der Spiralbohrer 4,1 mm (MetavCUT Standard Line, 47041-FDA) ist für den Einsatz in Handbohrmaschinen geeignet; die kurze Ausführung bietet dabei mehr Stabilität und reduziert die Gefahr von Verbiegen. Ist die Schaftausführung geschliffen oder gewalzt? Die Schaftausführung dieses Bohrers ist geschliffen, was eine hohe Rundlaufgenauigkeit und scharfe Schneidkanten gewährleistet; das ist besonders bei präzisen Metallbohrungen von Vorteil. Welche Vorteile bietet der 135° Spitzenwinkel in der Praxis? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers (47041-FDA) verringert das Ausbrechen beim Anbohren harter Werkstoffe und verbessert die Zentrierwirkung, sodass kontrolliertes Anbohren ohne übermäßiges Wandern möglich ist. Wie wird der Bohrer geliefert und wie viele Stück sind in einer Einheit? Der Spiralbohrer wird in einer Verpackungseinheit von 10 Stück geliefert; die SKU lautet 47041-FDA und gehört zur MetavCUT Standard Line.
4.1mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill (Karosseriebohrer) — 4.1 mm, 135° Point Angle, Double‑Ended, Black Finished, HSS‑G The Body Drill is a double‑ended Twist Drill for metalworking, engineered by MetavCUT for use in hand drills and drilling machines with a 4.1 mm diameter and a 135° point angle for reliable performance in hard materials. Double‑ended design for twice the usable life Fully ground HSS‑G for precise, clean holes 135° point angle for harder steels and stainless Reduced feed force; up to 40% faster drilling Faster, more efficient metalworking with precise cutting geometry The fully ground HSS‑G geometry delivers consistently sharp cutting edges and excellent runout accuracy, so drilling into alloyed and unalloyed Steel, Cast Steel and Non‑Ferrous Metals becomes more efficient. The 135° point angle reduces entry forces and improves centring in hard materials; as a result, users benefit from faster penetration and less tool wandering when compared to standard point geometries. Double‑ended design reduces downtime and cost per hole A double‑ended or double‑sided layout means each tool offers two functional tips, effectively providing two drills in one and cutting replacement frequency. When one tip dulls, the drill can be reversed for immediate reuse, which is especially practical in sheet metal and bodywork applications where short, stable drills are required. This design supports uninterrupted workflow and lowers total tooling cost. Ideal for demanding applications and compatible machines Designed for use with a hand drill or drilling machine, this Body Drill suits applications such as holes for rivets and thin‑sheet work, as well as machining into harder substrates. The fully ground shank and short overall length contribute to stability under higher loads, making the tool well suited for workshop and industrial environments where precise, repeatable holes are required. Handling, cooling and best‑practice recommendations Because ground HSS variants can be more brittle than rolled types, it is advisable to use adequate cutting fluid and moderate feed rates for sustained life. The fully ground spiral flutes ensure clean chip evacuation; combined with intermittent cooling this reduces thermal stress and prolongs tip life. For optimal results in thicker or very hard materials, prefer stationary machines with stable clamping. We recommend the MetavCUT Body Drill for professional metalworking tasks requiring fast, precise, and repeatable holes — for expert guidance or further technical data contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Body Drill / Karosseriebohrer Brand: MetavCUT SKU: 59041-FDA Diameter: 4.1 mm Point Angle: 135° Type / Execution: Double‑ended (double‑sided) Colour: Black finished without margin For Drill Type: Hand Drill / Drilling Machine Spiral Length: 13 mm Overall Length: 55 mm Shank: Fully ground Material: HSS‑G Model Series: Profi Line Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Body Drill are primarily used for machining high‑strength workpieces and larger drill diameters; their geometry makes them relatively easy to resharpen and able to withstand greater loads, which is why they are common for metalworking and bodyshop applications. Which three drill types are there? The three common drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Body Drill belongs to the metal drill group and is optimised for tough, alloyed and unalloyed metals. Can the MetavCUT Body Drill be used in wood? The MetavCUT Body Drill (a metal‑type twist drill) can be used in Wood, but guidance and finish tend to be inferior compared with dedicated wood drills; however, they are easier to resharpen and exhibit less self‑feeding in softer materials.
4.1mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
MetavCUT Body Drill – Twist Drill, Ø 4.1 mm, 135°, Double-sided, Bright finished, HSS‑G, Fully ground The MetavCUT Body Drill is a double‑ended Twist Drill designed for precision metalworking in Drilling Machines, offering a 135° tip angle and a fully ground shank for high concentric accuracy. HSS‑G construction for hard metals Double‑ended design for extended usability 135° tip angle for stainless steel and hard alloys Fully ground shank for precise concentricity Bright finished surface for smooth chip flow Outstanding cutting performance for demanding metals Designed for work with legated and unlegated steels, this Twist Drill delivers high cutting performance thanks to its HSS‑G alloy and a 135° tip angle. The geometry reduces radial forces when entering hard materials, so drilling starts cleaner and with less wandering. Users benefit from faster penetration in tough substrates and a reduced risk of workpiece damage. Practical workshops find the shorter, double‑ended format especially suited to sheet and bodywork tasks where repeatable, centred holes are required. Long life through precise grinding and surface finish A CNC grind of the flutes creates very sharp cutting edges and excellent runout properties, while the bright finished surface supports consistent chip evacuation. This ground manufacturing approach yields cleaner holes and longer usable life under appropriate cooling. The fully ground shank improves centring in chucks and reduces vibration, which in turn enhances tool life and hole quality when used in a stable Drilling Machine setup. Applications, guidance and safe handling in the workshop Engineered for metalworking, the Twist Drill is particularly effective on cast materials, Tempered Steels, Non‑Ferrous Metals and Hard Plastics. For best results, select appropriate cutting speeds and use coolant for higher alloy steels. When turning a blunt side, the double‑ended design allows immediate reuse by flipping the tool, providing operational efficiency in production or maintenance environments. Always secure the workpiece and observe safety practices when working with high‑speed Metal Drilling. Who benefits most and why experts choose this design Maintenance technicians, panel beaters and precision shops benefit from the combination of double‑ended utility and HSS‑G sharpness. The reduced axial force and improved centring capability make the drill a practical choice for repeatable holemaking in bodywork and thin‑plate metal applications. MetavCUT’s Standard Line aims to balance robust performance with straightforward handling for both station‑based and mobile Drilling Machine work. Strong recommendation: Choose the MetavCUT Body Drill for precision metal drilling — contact METAV Werkzeuge for tailored advice and technical support via email, phone or WhatsApp Are you unsure whether this Twist Drill meets your requirements or need additional data? METAV Werkzeuge offers competent consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58041-FDA Diameter: 4.1 mm Tip Angle: 135° Spiral Length: 13 mm Overall Length: 55 mm Material: HSS‑G Execution: Double-sided Shaft Execution: Fully ground Colour: Bright finished Intended Use: Drills for metal / Drilling Machine Model Series: Standard Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Body Drill Twist Drill? The MetavCUT Body Drill Twist Drill is primarily used for machining high‑strength metals and larger drilling diameters; its double‑ended design and HSS‑G composition make it suitable for demanding bodywork and thin‑plate applications where robust, repeatable holes are required. Can the MetavCUT Body Drill be used in handheld drills? The MetavCUT Body Drill Twist Drill is intended for use with Drilling Machines but can be used in suitable Hand Drills when proper clamping and reduced cutting speeds are observed; for best performance and safety, a stable Drilling Machine with coolant is recommended. What are Twist Drills primarily used for? Twist Drills are mainly applied in the machining of high‑strength materials and larger drill diameters; their design enables straightforward resharpening and they withstand higher loads, making them ideal for metalworking and bodywork tasks. Which three drill types exist? There are three common families of drill: Metal Drills, Wood Drills, and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the secondary cutting edge at the tip of the Twist Drill, which lowers friction forces and therefore decreases required feed force while improving centre‑holding accuracy in the workpiece. Can a metal drill be used to drill wood? A Metal Drill can be used in wood, but guidance and hole finish are generally inferior compared to purpose‑made Wood Drills. Metal Drills are easier to resharpen and tend to have less aggressive self‑feed characteristics. For which drilling depths is the Twist Drill most commonly used? A through‑hole is typically made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.
Reliable holemaking for every production environment
Metal drill bits, primarily classed as HSS drill bits, deliver process-secure, dimensionally accurate holes across a wide range of metallic materials. Designed for both hand-held drilling and CNC series production, these twist drills maintain cutting performance at elevated temperatures and provide the toughness required for industrial workshop and machining applications.
Why these drills matter in your workflow
The core function of metal drill bits is centred on efficient material removal with consistent hole geometry and repeatable centring. Their geometry and cutting-edge design reduce the need for rework, permit drilling without prior centre-punching on many surfaces, and ensure reliable chip evacuation. In practice, this means shorter cycle times on batch runs, safer setup for manual operations, and stable performance under the demands of production.
- Increased production uptime through predictable tool life and wear behaviour.
- Better first-pass quality thanks to optimised tip geometry and cross-point design.
- Versatile material capability: suitable for structural steels, cast irons and non-ferrous metals.
- Compatibility with hand drills, pillar drills and CNC machines for workshop-to-production scalability.
Benefits you can measure
- Reduced rework rates and improved hole tolerances.
- Longer intervals between tool changes when using HSS-Co 5 or HSS-Co 8 variants.
- Improved centring and reduced walking on smooth surfaces thanks to cross-point geometry.
- Flexibility across material classes from aluminium to hardened steels when selecting the appropriate grade.
Metav as your precision partner
Metav combines decades of industry expertise with a comprehensive range that democratises precision for workshops and procurement teams. From the logistics hub in Emmerich, Metav acts as a quality filter for the European market, supporting over 48,000 customers and stocking more than 250,000 products. For buyers seeking a single, reliable source for high-performance drill solutions, Metav offers consistent availability and a professionally curated selection of metal drill bits and related tooling.
Technical data at a glance
- material: high-speed steel (HSS)
- variant: rolled HSS-R; ground HSS-G; high-alloy HSS-E
- cobalt options: HSS-Co 5; HSS-Co 8
- suitable for: alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron, aluminium, copper, brass
- geometry: typical tip angles 118° and 135°; cross-point (split point) for reduced walking
- application environments: hand drilling, pillar drill, CNC machining
Compact and reliably engineered, these metal drill bits—also referred to as HSS drill bits or twist drills—form the backbone of precision drilling operations in industrial and workshop settings.
FAQ
What distinguishes HSS drill bits from cobalt variants?
HSS drill bits provide high toughness and good performance at elevated temperatures; HSS-Co 5 and HSS-Co 8 variants add cobalt for increased hot hardness and extended tool life when machining tougher or stainless steels.
Which materials can metal drill bits handle reliably?
Metal drill bits are suitable for alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron and non-ferrous metals such as aluminium, copper and brass, depending on the selected grade and geometry.
When should I choose ground HSS-G over rolled HSS-R?
Choose ground HSS-G for higher concentricity, better chip evacuation and longer service life in production; rolled HSS-R is a cost-effective option for standard workshop tasks.
How does tip geometry affect drilling performance?
Tip angles around 118° are common for general-purpose drilling, while 135° tips and cross-point designs improve penetration and reduce walking on harder or polished surfaces.
Can these drill bits be used on CNC machines?
Yes—metal drill bits are suitable for hand-held, pillar and CNC operations; selection of grade and geometry should match the machine capability and workpiece material.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com