Precision metal drills for reliable, high-performance holemaking
Precision metal drills, commonly supplied as HSS twist drills, are engineered to produce clean, dimensionally accurate cylindrical holes in materials such as alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron and non-ferrous metals like aluminium, copper and brass, delivering consistent results in both manual and CNC operations. Their high-speed steel construction provides exceptional toughness, elasticity and fracture resistance, while variants such as roll-formed HSS-R and ground HSS-G offer cost-effective general performance or enhanced runout accuracy and chip evacuation respectively, and HSS-E or HSS-Co types ensure superior hot hardness when machining stainless or highly alloyed steels. Optimised point geometries (typically 118° for softer steels and 135° for harder grades) combined with a cross grind reduce feed force, enable accurate centring and promote efficient chip removal, improving process reliability and prolonging tool life.
4.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Wirtschaftlichkeit, Haltbarkeit und Präzision verbinden sich in diesem Spiralbohrer zu einem effizienten Werkzeug für Metallarbeiten. Die TiN-beschichtete Oberfläche reduziert Reibung und verlängert die Lebensdauer, während die geschliffene HSS-G-Geometrie und die kurze Ausführung für stabile, präzise Bohrungen sorgen. Bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere Beratung an. Spiralbohrer 4,5 mm von MetavCUT – kurzer HSS-G Bohrer (Typ N) Der Spiralbohrer 4,5 mm ist ein kurzer, geschliffener HSS-G Bohrer, ausgelegt für präzise Bohrungen in legierten und unlegierten Stahl sowie in Guss- und Nichteisenmetallen. Spiralbohrer »Spiralbohrer« von MetavCUT TiN-Beschichtung reduziert Reibung und Verschleiß Geschliffen: hohe Rundlaufgenauigkeit Kurze Ausführung für stabile Präzisionsbohrungen Spitzenwinkel 135° für harte Werkstoffe Hohe Standzeit durch Beschichtung und Materialwahl Die Kombination aus HSS-G und TiN-beschichteter Oberfläche sorgt für eine spürbar längere Standzeit bei Metallbearbeitung. Durch die Titan-Nitrid-Beschichtung verringert sich die Reibung an der Schneide, was Wärmeentwicklung und Werkzeugverschleiß reduziert. Für Anwender bedeutet das weniger Werkzeugwechsel, höhere Ausbringung und geringere Stillstandzeiten bei Serien- und Einzelfertigung. Kurz ausgeführte Bauform für präzise Ergebnisse Die kurze Ausführung reduziert die Auskraglänge und verbessert dadurch die Stabilität während des Bohrens. Diese Konstruktion minimiert das Verbiegen und Wandern des Werkzeugs, wodurch saubere Bohrbilder und engere Toleranzen erzielt werden. Besonders bei stationären wie auch handgeführten Maschinen ist die kürzere Bauform vorteilhaft, weil sie kontrollierten Vorschub und bessere Rundlaufgenauigkeit ermöglicht. Geschliffene Geometrie und Schneidvorteile Durch den CNC-basierten Schliff der Spannuten erreicht der Bohrer eine scharfe Kantengeometrie und hohen Rundlauf. Die geschliffene Ausführung unterstützt ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft im Vergleich zu konventionellen HSS-Bohrern. Anwender profitieren von schnellerem Arbeitsfortschritt und ergonomischerer Handhabung, vor allem bei der Bearbeitung harter Werkstoffe. Eignung und Anwendungsempfehlung für Werkstatt und Montage Mit einem Durchmesser von 4,5 mm fällt das Produkt in den Standard-Bereich für Alltagsanwendungen und eignet sich für Werkstatt, Montage und anspruchsvolle DIY-Projekte. Der Typ N Normalspirale ist für Metall bohrungen konzipiert und eignet sich besonders für legierte und unlegierte Stähle, Temperguss, Gusseisen sowie Nichteisenmetalle. Bei stationären Einsätzen empfiehlt sich eine Kühlmittelzufuhr, um die Lebensdauer weiter zu erhöhen. Für präzise Metallbohrungen empfiehlt MetavCUT die Verwendung dieses kurz ausgeführten, TiN-beschichteten HSS-G Bohrers; bestellen Sie unkompliziert über Metav und kontaktieren Sie uns bei Detailfragen per eMail info@metav-werkzeuge.com Produktmerkmale Artikelnummer: 46045-FDA Marke: MetavCUT Serie: Standard Line Daten Durchmesser: 4,5 mm Gesamtlänge: 80 mm Spirallänge: 47 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Norm: DIN 338 Farbe: TIN-beschichtet Schaft Ausführung: geschliffen Typ: Typ N Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 SKU: 46045-FDA FAQ Für welche Materialien eignet sich der Bohrer primär? Der MetavCUT Spiralbohrer in 4,5 mm eignet sich primär für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie für Nichteisenmetalle und Hartkunststoff. Die Kombination aus HSS-G und TiN-beschichtung macht ihn besonders geeignet für anspruchsvolle Metallarbeiten. Ist die kurze Ausführung auch für Handbohrmaschinen geeignet? Ja, die kurze Ausführung ist für Handbohrmaschinen geeignet und bietet durch die reduzierte Auskraglänge bessere Stabilität. Bei handgeführten Anwendungen empfiehlt sich dennoch kontrollierter Vorschub und gegebenenfalls Anpunktieren für höchste Präzision. Welche Vorteile bringt die geschliffene Schaftausführung? Die geschliffene Ausführung sorgt für scharfe Kanten und hohe Rundlaufgenauigkeit, was sauberere Bohrlöcher und reproduzierbare Ergebnisse ermöglicht. Bei Verwendung des MetavCUT Spiralbohrers zeigt sich dies besonders in präzisen Metallbohrungen. Woraus ergibt sich die höhere Bohrgeschwindigkeit und verringerte Anpresskraft? Die Geometrie und der CNC-Schliff der Spannuten führen zu effizienterer Spanabfuhr und geringeren Reibungsverlusten. Dadurch kann der Bohrer bis zu 40 % schneller bohren und benötigt etwa 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern.
4.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Kombinieren Sie die hohe Stabilität der kurzen Ausführung mit der Verschleißfestigkeit der TiN-Beschichtung für präzise Metallbohrungen. Profitieren Sie von schnellerem Vorschub und geringerem Anpressdruck dank geschliffener Geometrie. Bestellen Sie den Spiralbohrer direkt über Metav oder lassen Sie sich vor dem Kauf fachkundig beraten. Spiralbohrer 4,5 mm (HSS-G, TIN-beschichtet) – MetavCUT Profi Line Spiralbohrer 4,5 mm in kurzer Ausführung für präzises Bohren in Stahl und NE-Metallen mit hoher Standzeit Kurze Ausführung für hohe Stabilität HSS-G geschliffen für scharfe Kanten TiN-Beschichtung reduziert Reibung und Verschleiß Spitzenwinkel 135° für härtere Werkstoffe Geeignet für Handbohrmaschine und Werkstattbetrieb Höhere Präzision durch kurze Auskraglänge Die kurze Bauform sorgt für deutlich weniger Ausschlag und eine höhere Stabilität beim Bohren. Durch die verminderte Auskraglänge bleibt die Bohrung runder und Maßtreuer, was besonders bei Passungen und Montagebohrungen zählt. Der geschliffene Schaft und die präzise Geometrie ermöglichen ein bis zu 40% schnelleres Bohren bei gleichzeitig etwa 50% reduzierter Anpresskraft im Vergleich zu Standard-HSS-Bohrern. Längere Lebensdauer durch Beschichtung und Materialwahl Die Kombination aus HSS-G und TiN-beschichtung minimiert den Verschleiß bei Metallbearbeitung. Die Dünnschicht verringert die Reibung und erhöht die Wärmebeständigkeit, wodurch sich die Standzeit im Einsatz mit geeigneter Kühlung erhöht. Diese Eigenschaften machen den Bohrer zur guten Wahl für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle. Praktische Einsatzbereiche und Maschinenkompatibilität Mit einem Durchmesser von 4,5 mm liegt der Bohrer im Standard-Bereich und eignet sich für Werkstatt, Montage und DIY-Anwendungen. Er ist kompatibel mit Handgeführten Bohrmaschinen und stationären Geräten und verarbeitet dünne bis mittlere Bleche sowie Profile zuverlässig. Für hochpräzise Bohrungen empfiehlt sich vorheriges Anpunkten, um das Wandern des Bohrers zu minimieren. Fertigung, Normen und Anwendungshinweise Der Spiralbohrer entspricht der DIN 338 und ist als Typ N mit Normalspirale ausgeführt, was ihn zum universellen Metallbohrer macht. Die geschliffene Herstellung garantiert sehr scharfe Schneiden und hohen Rundlauf, erfordert aber sachgemäße Kühlung und stationäre Spannbedingungen, um Bruchrisiken zu reduzieren. Der Spitzenwinkel 135° unterstützt das Anbohren harter Werkstoffe wie Edelstahl. Empfehlung: MetavCUT Profi Line Kurzbohrer mit TiN-Schicht für präzise Metallbearbeitung über Metav anfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 41045-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 4,5 mm Gesamtlänge: 80 mm Spirallänge: 47 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Beschichtung: TIN-beschichtet Schaftausführung: geschliffen (Zylinderschaft) Norm: DIN 338 Typ: Typ N Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der Spiralbohrer MetavCUT Profi Line (Spiralbohrer, SKU 41045-FDA) ist besonders geeignet für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Ist der Bohrer für Handgeführte Akkubohrschrauber geeignet? Ja, der Spiralbohrer MetavCUT Profi Line wurde für Werkstatt- und Montageeinsätze konzipiert und lässt sich mit Handgeführten Bohrmaschinen verwenden, wobei Anpunkten bei hoher Präzision empfohlen wird. Welche Vorteile bietet die TiN-Beschichtung konkret? Die TiN-beschichtung des MetavCUT Profi Line Spiralbohrers vermindert Reibung, verbessert die Wärmebeständigkeit und verlängert damit die Standzeit unter geeigneter Kühlung. Warum ist der Bohrer geschliffen und was bedeutet das für die Anwendung? Die geschliffene Ausführung (HSS-G) der MetavCUT Profi Line liefert sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, erfordert jedoch vorsichtigen Einsatz und Kühlung, da geschliffene Bohrer spröder sein können. Worauf ist beim Bohren mit Spitzenwinkel 135° zu achten? Ein Spitzenwinkel von 135° beim MetavCUT Profi Line Spiralbohrer erleichtert das Anbohren harter Werkstoffe und reduziert das Ausbrechen, vor allem bei Edelstahl und gehärteten Stählen.
4.5mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill — HSS‑G Metal Twist Drill, Ø 4.5 mm, 135° Tip, DIN 338, W‑style Tip The Twist Drill for Drilling Machines is a high‑performance HSS‑G metal drill engineered for fast, low‑effort boring in alloyed and unalloyed steels and a wide range of non‑ferrous materials. Rapid HSS‑G cutting for faster drilling 135° tip for hardened steels Conforms to DIN 338 short twist drills Multi‑bevel W‑style tip for clean starts For use in Drilling Machines and hand drills Engineered for faster, lower‑effort metal drilling with measurable gains Designed for professional metalworking, the HSS‑G composition delivers high hardness and thermal stability while the specially ground geometry provides up to 40% faster drilling and requires 50% less feed force compared with conventional HSS drills. This means less operator fatigue and higher throughput on repetitive tasks. The HSS‑G material also permits straightforward regrinding, so the tool life and cost efficiency remain attractive for demanding workshop cycles. Secure centring and clean holes in tougher materials thanks to a 135° tip A 135° tip angle reduces the risk of walking on difficult surfaces and shortens the plunge phase when working with stainless and tempered steels. The precision ground W‑style cutting edge ensures a clean entry with minimal burr formation, producing holes with better edge quality and less need for rework. Conformance to DIN 338 classifies the tool as a short twist drill with cylindrical shank, making its performance predictable on stationary and portable drilling equipment. Machine‑compatible design and practical dimensions for everyday use With a nominal Diameter of 4.5 mm, Spiral Length of 47 mm and an Overall Length of 80 mm, this tool fits standard chucks and is suitable for both Drilling Machines and hand drills used in workshops and maintenance environments. The Shaft Execution is supplied with multi‑bevel cutting edge, without triangular shank, allowing secure clamping in cylindrical holders while delivering reliable chip removal. Such dimensions and form factor simplify inventory planning and ensure compatibility with common setups. Who benefits and how to maintain peak performance Maintenance is straightforward: the HSS‑G substrate can be re‑sharpened on standard tool grinders, restoring cutting geometry and extending service life. Target users include machinists, maintenance technicians and metal fabricators who need a resilient, easy‑handled drill for mixed materials like alloyed steel, cast iron, non‑ferrous metals and engineering plastics. Regular inspection of cutting edges and modest cooling during prolonged runs protect tool life and optimise drilling quality. Strongly recommended for professional metalworking: choose MetavCUT HSS‑G Twist Drills for reliable, faster holes — for technical advice or to confirm suitability, METAV Werkzeuge offers expert consultation via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Precise Technical Specifications for Reliable Workshop Use Designation: Twist Drill Brand: MetavCUT SKU: 55045-FDA Diameter: 4.5 mm Tip Angle: 135° Spiral Length: 47 mm Overall Length: 80 mm Material: HSS‑G Standard: DIN 338 Shaft Execution: with multi‑bevel cutting edge, without triangular shank Model Series: Spezial Application: Drills for metal For Drill: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for, and which materials suit the MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily designed for metalworking; it is used for drilling alloyed and unalloyed steels, cast materials and many non‑ferrous metals as well as hard plastics. Its ground geometry and HSS‑G material allow efficient, precise holes in demanding applications where speed and edge quality are important. Which three drill types are commonly used? Commonly distinguished drill types are: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill family and is optimised for metalworking tasks. For what purpose are twist drills most often used? Twist Drills are mainly applied to the machining of high‑strength materials and larger diameters. Their shape allows relatively simple regrinding and they withstand greater loads, which makes them the standard choice for through‑hole drilling in engineering applications. Why are twist drills pointed (ground to a tip)? Pointing a Twist Drill reduces the cross‑cut at the tip, lowering friction and thus requiring smaller feed forces; this improves centring and makes hole starts cleaner. The pointed geometry also helps to guide the drill precisely into the workpiece, reducing walking and burr formation. If you are unsure whether this tool matches your application or need further technical data, METAV Werkzeuge provides comprehensive and competent advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 or WhatsApp +49 170 2837271
4.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G Twist Drill, 4.5 mm, 135° tip, Bright finished, Fully ground, DIN 340 The Twist Drill is a long‑version metal drilling bit designed for deep and hard‑material drilling with drilling machines and hand drills. Long design for deeper, hard‑to‑reach holes 135° tip for reliable entry into hard materials Fully ground HSS‑G for precise, clean holes DIN 340 standard for industrial compatibility Reach deep holes reliably with the long design The long execution of this Twist Drill (Total Length 126 mm, Spiral Length 82 mm) is ideal when holes must be drilled far from the workpiece edge or in recessed positions. The extended Spiral Length reduces the need for extensions or special fixtures, allowing deeper boreholes with consistent chip evacuation. This makes the bit particularly useful in maintenance, toolroom tasks, and assembly work where access is limited and reliability matters. Faster cutting and easier feed thanks to fully ground HSS‑G The HSS‑G material and fully ground flute geometry provide a sharper cutting edge and high concentricity. Compared with rolled HSS variants, a ground Twist Drill can cut up to 40% faster and requires significantly less feed force, which reduces operator fatigue and improves spindle load behaviour. The ground geometry also creates cleaner hole walls in alloyed and unalloyed steels, cast materials and non‑ferrous metals. Optimised tip geometry for harder materials A 135° tip angle reduces the tendency to wander on hard surfaces and shortens initial penetration time in tough materials such as stainless steels. The flatter tip distributes cutting forces better and is recommended when drilling high‑strength steels and cast materials up to the limits specified by the DIN 340 family. For best results, combine with appropriate coolant and moderate spindle speeds to balance tool life and surface finish. Practical guidance for use and durability The bright finished surface improves corrosion resistance and visual inspection, while the fully ground shank ensures a secure clamping fit in drill chucks. Although ground HSS bits can be more brittle than rolled types, correct coolant use and controlled feed rates extend service life considerably. For stationary machining and demanding metalworking applications, the Standard Line model offers a balanced compromise between performance and tool robustness. We recommend the MetavCUT Twist Drill for professionals who require deep, precise holes in metal — for personalised application advice or technical clarifications contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill Marke: MetavCUT SKU: 53045-FDA Diameter: 4.5 mm Total Length: 126 mm Spiral Length: 82 mm Tip Angle: 135° Material: HSS‑G Execution: long Shank execution: fully ground Colour / Finish: bright finished For Drilling Machine: Drilling Machine / Hand Drill Application: Drills for metal Model Series: Standard Line Norm: DIN 340 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can this Twist Drill be used in a hand drill or only in a machine? The MetavCUT Twist Drill is suitable for both drilling machines and hand drills, but for best precision and tool life use in a stable chuck with controlled speeds; heavier use in stationary machines with coolant is recommended for harder materials. What is a Twist Drill used for? A Twist Drill is primarily applied to the machining of high‑strength materials and larger bore diameters; it is relatively easy to regrind and withstands high cutting loads, making it suitable for alloyed and unalloyed steels, cast materials and other demanding applications. Which three drill types are there? The main drill categories are metal drills (such as HSS Twist Drills), wood drills, and stone/concrete drills.
4.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Robuste HSS-Konstruktion und kurze Ausführung bieten hohe Stabilität und präzise Bohrung in Stahl; die DIN 338-Konformität gewährleistet Kompatibilität mit stationären Bohrmaschinen. Bestellen Sie den Spiralbohrer direkt über Metav oder kontaktieren Sie unsere Beratung für technische Details und Einsatzempfehlungen. Spiralbohrer von MetavCUT – kurzer HSS Twist Drill für Metallbearbeitung Der Spiralbohrer von MetavCUT ist ein kurzer HSS-Spiralbohrer, der für präzise Metallbohrungen an stationären und handgeführten Maschinen konzipiert wurde HSS-Material für legierten und unlegierten Stahl DIN 338: kurze Spiralbohrer für stationäre Maschinen Typ N-Normalspirale optimal für Metallbohrungen Ø 4,6 mm mit hoher Stabilität bei kurzer Ausführung Geeignet für Handbohrmaschine und stationäre Maschinen Stabilität durch kurze Ausführung und HSS-Material für saubere Bohrungen Die Kombination aus HSS-Werkstoff und kurzer Konstruktion reduziert die Auslenkung während des Bohrens und minimiert das Bruchrisiko bei kleinen Durchmessern. Durch die kurze Ausführung verringert sich die Auskraglänge, was eine höhere Rundlaufstabilität und damit sauberere Bohrbilder in Stahl und Gusseisen ermöglicht. Anwender profitieren von geringerer Nacharbeit und konstanter Maßhaltigkeit. Präzision beim Anbohren und Empfehlungen für Spitzenwinkel Für viele Metallarten bietet der Spitzenwinkel 118° ein ausgewogenes Anbohrverhalten; dieser Winkel erleichtert das Zentrieren auf gewölbten Oberflächen und eignet sich besonders für legierte und unlegierte Stähle. Für härtere Werkstoffe kann ein anderer Spitzenwinkel sinnvoll sein; bei Standardanwendungen in Werkstatt und Montage ist die Einstellung 118° jedoch oft die wirtschaftlichste Wahl. Einsatzgebiete, Maschinentypen und Durchmesser-Cluster Mit Ø 4,6 mm liegt der Bohrer im Standard-Bereich, ideal für Werkstatt, Montage und DIY-Projekte. Die Ausführung eignet sich für dünne bis mittlere Bleche, Profile und Flachstähle sowie für Handbohrmaschine und stationäre Säulenbohrmaschinen. Bei Anforderungen an hohe Serienraten oder extrem gehärtete Werkstoffe sollte auf Vollhartmetall oder spezialisierte Werkzeuge ausgewichen werden. Handhabung, Vorschub und praktische Tipps für saubere Ergebnisse Vor dem Bohren empfiehlt sich leichtes Anpunkten zur Vermeidung von Wandern, besonders bei Handbohrmaschinen. Kühlung reduziert Wärmeeintrag und verlängert die Lebensdauer des Werkzeugs; Schneidöl ist bei Stahlbearbeitung empfohlen. Die Spirallänge 47 mm bietet genügend Spanraum für mittlere Bohrtiefen und unterstützt zuverlässige Spanabfuhr bei häufigen Werkstattaufgaben. Sichern Sie sich die präzise HSS-Qualität von MetavCUT und bestellen Sie über Metav oder kontaktieren Sie uns per eMail an info@metav-werkzeuge.com beziehungsweise telefonisch unter +49 2822 7131930 – wir beraten bei Einsatz und Maschinenauswahl. Produktmerkmale Artikelnummer: 40046-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Typ: Typ N Material: HSS Norm: DIN 338 Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Fakten Durchmesser: 4,6 mm Gesamtlänge: 80 mm Spirallänge: 47 mm Spitzenwinkel: 118° Besonderheiten Typ: Typ N (Normalspirale, Metall) Material: HSS (Schnellarbeitsstahl) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz (hohe Stabilität, geringe Auskragung) Farbe: schwarz FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer in HSS eignet sich vor allem für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; bei sehr harten Stählen kann ein anderes Werkzeug wirtschaftlicher sein. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung und der Durchmesser von 4,6 mm machen den Spiralbohrer von MetavCUT kompatibel mit Handbohrmaschine und bieten ausreichend Stabilität für typische Werkstattanwendungen. Welcher Spitzenwinkel ist verbaut und warum? Der Spiralbohrer verfügt über einen Spitzenwinkel von 118°, der eine gute Balance aus Zentrierverhalten und Vorschub erzielt und sich gut für viele Stahlarten eignet. Wie tief kann mit diesem Bohrer sicher gebohrt werden? Die Spirallänge von 47 mm und die Gesamtlänge von 80 mm erlauben mittlere Bohrtiefen; für sehr tiefe Sacklochbohrungen sind abgestufte Vorgehensweisen oder spezielle Werkzeuge empfehlenswert. Welche Norm gilt für diesen Bohrer und welche Vorteile bringt sie? Die Einhaltung der DIN 338 garantiert die standardisierte Bauform kurzer Spiralbohrer mit Zylinderschaft und erleichtert die Auswahl für stationäre Maschinen sowie die Vergleichbarkeit technischer Daten.
4.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Dieser kurze Abriss fasst die Stärken zusammen: HSS-E für erhöhte Standzeit, die kurze Ausführung für maximale Stabilität und der 135° Spitzenwinkel für sicheres Anbohren in harten Werkstoffen sorgen für präzise Ergebnisse. Bestellen Sie das Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. MetavCUT Spiralbohrer 4,6 mm — Standard Line (kurze Ausführung) MetavCUT Spiralbohrer 4,6 mm in kurzer Ausführung für präzise Metallbearbeitung mit Handbohrmaschine Kurze Ausführung für hohe Stabilität HSS-E mit 5% Kobalt für längere Standzeit Geschliffen: Hohe Rundlaufgenauigkeit und scharfe Schneiden DIN 338 Klassifizierung für kurze Spiralbohrer 135° Spitzenwinkel ideal für harte Werkstoffe Präzision durch kompakte Bauweise für saubere Bohrbilder Die kurze Ausführung reduziert die Auskraglänge und minimiert Vibrationen, wodurch saubere Bohrbilder und hohe Maßhaltigkeit erreicht werden. Dieses Bohrwerkzeug ist speziell für stationäre und handgeführte Anwendungen konzipiert, bei denen Stabilität und kontrollierter Vorschub wichtiger sind als große Reichweite. Anwender profitieren von geringerem Wanderverhalten beim Anbohren und einer zuverlässigeren Zentrierung auf der Oberfläche. Langlebigkeit und Einsatz in anspruchsvollen Materialien Der Einsatz von HSS-E mit 5% Kobalt erhöht die Warmfestigkeit und Widerstandsfähigkeit gegen Verschleiß, deshalb eignet sich der Kurzbohrer besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle. Der 135° Spitzenwinkel verringert die Anbohrkraft bei harten Werkstoffen und verlängert die Werkzeuglebensdauer. Durch fachgerechte Kühlung und stationären Einsatz lässt sich die Performance weiter optimieren. Geschliffene Geometrie für höchste Genauigkeit Die geschliffene Schaft- und Spannutengeometrie garantiert scharfe Schneiden und hervorragende Rundlaufgenauigkeit. Das Resultat sind präzise, gratarme Bohrungen mit definierten Toleranzen. Für Anwendungen, die saubere Passungen verlangen oder nachbearbeitungsarme Ergebnisse benötigen, bietet diese Ausführung klare Vorteile gegenüber gewalzten Varianten. Geeignete Einsatzbereiche und Anwenderhinweise Im Standard-Bereich (2,0–13,0 mm) ist dieses Werkzeug ideal für Werkstatt, Montage und überwiegende Metallbearbeitung. Bei Handbohrmaschinen empfiehlt sich ein ruhiger Vorschub und gegebenenfalls Vorzentrieren mit einem Zentrierbohrer, um das Wandern zu minimieren. Für tiefe oder großserielle Bohrungen sind spezialisierte Aufbohrverfahren oder andere Werkzeugtypen wirtschaftlicher. Empfehlen Sie das MetavCUT Kurzbohrersystem mit HSS-E für präzise Metallbohrungen; bei Fragen stehen unsere Techniker zur Verfügung – per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Leistungsmerkmale Artikelnummer: 47046-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Typ: Typ N Norm: DIN 338 Zahlen Durchmesser: 4,6 mm Gesamtlänge: 80 mm Spirallänge: 47 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-E (Schnellarbeitsstahl, 5% Kobalt erhöht Warmfestigkeit) Schaftausführung: geschliffen (CNC-Schliff für hohe Rundlaufgenauigkeit) Ausführung: kurz (reduzierte Auskraglänge, höhere Stabilität) Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall (legierter und unlegierter Stahl, Gusseisen, Nichteisenmetalle, Kunststoffe) Normhinweis: DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft FAQ Kann der Spiralbohrer für Edelstahl verwendet werden? Der MetavCUT Spiralbohrer aus HSS-E mit 135° Spitzenwinkel ist für harte Werkstoffe geeignet und kann für viele Edelstahlarten verwendet werden, allerdings empfiehlt sich konstante Kühlung und angepasste Schnittgeschwindigkeit; bei sehr zähen Edelstählen sind speziell legierte Sorten zu prüfen. Welche Bohrmaschine ist passend für dieses Werkzeug? Für stationäre Säulenbohrmaschinen und Handbohrmaschinen ist der MetavCUT Spiralbohrer 4,6 mm (SKU 47046-FDA) geeignet; bei Handgebrauch auf stabile Führung und Vorzentrierung achten, um Bruchrisiken zu minimieren. Worin liegt der Unterschied zwischen geschliffenen und gewalzten Bohrern? Geschliffene Bohrer, wie dieser Kurzbohrer, bieten schärfere Schneiden und bessere Rundlaufgenauigkeit, was zu präziseren Bohrlöchern führt; gewalzte Varianten sind tendenziell zäher, aber weniger scharf. Für welche Materialien ist dieser Kurzbohrer besonders empfohlen? Der MetavCUT Spiralbohrer eignet sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe, dank HSS-E und der kurzen Bauform für stabile Bearbeitung. Wie verhält sich der Bohrer bei tiefen Bohrungen? Bei Bohrungen über das Fünffache des Durchmessers hinaus empfiehlt sich mehrstufiges Vorgehen oder spezielle Spiralgeometrien; für das hier angebotene Kurzformat sind eher flachere Durchdringungen und präzise, kontrollierte Einsätze vorgesehen.
4.6mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — Double-sided Twist Drill, 4.6 mm, 135° Point, HSS-G, Bright Finished, Fully Ground Shank, Standard Line by MetavCUT The Body Drill is a double-sided Twist Drill designed for precise metalworking with Drilling Machines, offering fast penetration and reliable hole quality for sheet metal, castings and alloyed steels. Double-sided design for reversible use HSS-G material for precise metal drilling 135° point angle for harder materials Fully ground shank for high concentricity Bright finished surface for improved corrosion resistance Faster, cleaner holes thanks to precision engineering Manufactured for demanding metal applications, this Twist Drill combines a HSS-G cutting geometry with a 135° point angle to reduce chatter and improve centring in hard materials. The ground flute geometry provides sharp cutting edges and consistent chip evacuation, which means fewer restarts and a more predictable drilling process. For workshops that rely on repeatable results, this configuration lowers scrap rates and shortens cycle times. Practical benefits of the double-sided, fully ground design A double-ended layout lets the operator use both ends, effectively doubling tool life per piece and reducing tool changes. The fully ground shank ensures excellent concentricity in chucks and collets, minimising runout and vibration during high-speed operation. This results in cleaner Bohrlöcher and less secondary finishing, especially when working with thin sheet metal and structural parts. Where this drill excels and who benefits most The tool is optimised for metalworking: suitable for legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle and hard plastics. Professionals in Bodywork, Maintenance and Production will value the combination of robustness and precision. Workshops using portable Drilling Machines or small stationary units benefit from the reversible tip and the reliable performance of a ground HSS geometry. Handling recommendations and machining tips To preserve tool life, use appropriate cutting speeds for the material and apply coolant where possible, particularly for stainless steels. The Bright Finished surface eases chip release and reduces corrosion risk during storage. Because the drill is ground rather than rolled, it delivers superior hole quality but can be more brittle; avoid excessive side loads and use steady axial feed to prevent breakage. Strong recommendation: choose MetavCUT quality for demanding metal drilling — for further technical advice or selection help contact METAV Werkzeuge for expert support eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Information Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58046-FDA Diameter: 4.6 mm Point angle: 135° Overall length: 58 mm Spiral length: 13 mm Execution: double sided Shank finish: fully ground Colour: bright finished Material: HSS-G Application: Drills for metal Model series: Standard Line For use with: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Body Drill from MetavCUT used for and which machine fits best? The MetavCUT Body Drill is a double-sided Twist Drill intended for metalworking and is primarily used with handheld Drilling Machines or small bench drills where precise, repeatable holes in sheet and cast materials are required. Can the MetavCUT Body Drill be used for different metal types? The MetavCUT Body Drill with HSS-G construction is suitable for alloyed and unalloyed steels, cast steel, cast iron, non-ferrous metals and hard plastics, offering clean holes and reliable tool life under proper cutting conditions. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high-strength materials and large drill diameters. Its geometry is easy to grind and withstands higher loads, making it suitable for holes in demanding metals. Which three drill types exist? The three main drill types are metal drills, wood drills, and stone/concrete drills. Why are Twist Drills pointed? Pointing reduces the cross-cut at the tip of a Twist Drill. This lowers frictional forces so less feed force is required and improves the drill's centring in the workpiece. Can a metal drill be used for wood drilling? Metal drills can be used in wood, but they offer poorer guidance and less clean results compared with dedicated wood drills. Their advantage is easier resharpening and a reduced tendency to self-feed.
4.6mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N extra short, 4.6 mm, 135°, Bright Finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill is an extra short HSS‑G metal drill (Type N) designed for precise drilling in hard and alloyed steels with handheld Drilling Machines. Extra-short design for improved stability HSS‑G ground for faster, lower-force drilling 135° point angle for harder materials Cylindrical shank fits standard three-jaw chucks Conforms to DIN 1897 for industrial robustness Short form, big gains for stability and tight spaces Thanks to its Extra Short construction, this Twist Drill reduces bending and vibration during operation, which leads to fewer breakages and cleaner holes when working in confined or thin-walled components. The shortened Overall Length and reduced Spiral/Working Length make it particularly suitable for drilling in panels, profiles and assemblies where access is limited. Users benefit from improved tool life and safer handling, especially when exchanging bits frequently in workshop or maintenance environments. Faster, lower-effort metal drilling with optimised geometry The combination of HSS‑G material and a ground flute geometry enables up to 40% quicker drilling with about 50% less axial force compared with conventional HSS bits, according to the product data. A 135° Point Angle is chosen specifically for tougher substrates such as stainless and alloy steels; this angle reduces initial skidding and helps the bit cut more efficiently into hard materials. As a Type N (normal spiral) bit, it provides reliable chip evacuation for metalworking tasks while maintaining versatility across a range of ferrous and non‑ferrous metals. Simple fitting and dependable compatibility on common drills Equipped with a Cylindrical Shank, the Twist Drill is compatible with standard three‑jaw chucks found on most Hand Drilling Machines, making it easy to clamp and use without special adaptors. The design trade‑off is well known: universal fitting versus potential slipping under very high torque; correct chuck tightening and appropriate drilling speeds avoid this. Conformance to DIN 1897 ensures consistent dimensions and performance, supporting predictable results in professional workflows. Who gets the most from this bit and why it stands out Workshops, fabricators and field technicians benefit most from the MetavCUT extra short Twist Drill when precise, repeatable metal holes are required in restricted spaces. The bit’s robust construction addresses high demands in materials like cast iron, tempered steel and hard plastics used in industrial applications. Its Standard Line model series balances durability and economy, offering a reliable option for repair, maintenance and production tasks where controlled drilling behaviour matters. MetavCUT recommends this Twist Drill Type N for demanding metalworking tasks; for tailored advice or additional technical data, contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 56046-FDA Diameter: 4.6 mm Point angle: 135° Type: Type N Finish: Bright finished Execution: Extra short Material: HSS‑G Spiral length: 24 mm Overall length: 58 mm Shank execution: Cylindrical Suitable for: Drilling Machine (Hand Drilling Machine) Model series: Standard Line Applications: Drills for metal Norm: DIN 1897 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Twist Drill Type N be used in a handheld drill? Yes, the MetavCUT Twist Drill Type N is intended for use with Hand Drilling Machines; its Cylindrical Shank fits standard three‑jaw chucks and allows quick mounting for on-site and workshop tasks while ensuring stable operation when the chuck is properly tightened. Is the Twist Drill suitable for stainless steel and other hard metals? The Twist Drill from MetavCUT, made of HSS‑G with a 135° Point Angle, is particularly suited to harder materials such as stainless and alloyed steels; the geometry and material reduce skidding and support efficient cutting in demanding metalworking applications. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high‑strength materials and large drill diameters. This form is easy to resharpen and resists higher loads. The bit’s design suits drilling in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. Which 3 drill types are there? There are three common drill types: Metal drills, Wood drills, and Stone/Concrete drills.
4.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill (4.6 mm, 135°) — Type N, HSS-G, short, Bright Finished The MetavCUT Twist Drill is a short Type N drill designed for precision metalworking on Drilling Machines and suitable for demanding materials. Short HSS-G design for greater stability 4.6 mm diameter for precise metal holes 135° point angle for hard materials Fully ground shank for high runout accuracy Conforms to DIN 338 for reliable quality Engineered for precise metal drilling and clean holes This short Twist Drill is manufactured from HSS‑G and optimised for metal applications, delivering consistently clean holes in alloyed and unalloyed Steel, Cast Steel and Non‑Ferrous Metals. The fully ground geometry provides very sharp cutting edges and improved concentricity, which reduces wobble and produces accurate bores. For workshop environments where repeatable hole quality matters, this tool translates machine settings into predictable results and reduces rework. Short length reduces deflection and increases control A reduced overall length and a shorter flute length mean markedly improved stiffness and less tendency to bend under load. This design yields higher dimensional accuracy when drilling in tough materials and allows for more confident feed rates. The shorter HSS variant can enable up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS drills of similar diameter, making it especially suitable for precision work on stationary or portable Drilling Machines. Optimised geometry and material for demanding applications With a 135° point angle and Type N normal spiral, the cutter is tailored to penetrate harder workpieces with less walking and better centring. The HSS‑G (ground) fabrication process results in sharp flutes that excel at chip evacuation and produce clean hole walls; however, for best life expectancy the tool is recommended for use with appropriate coolant and controlled speeds. Typical applications include machining Steel, Cast Iron, Sintered Iron, Tempered Materials and Hard Plastics where stability and hole quality are priorities. Who benefits and practical recommendations for use Metalworkers, toolrooms and industrial maintenance teams gain the most from this short, stable design when accuracy and surface finish are critical. Use the drill in a proper chuck or collet with minimal overhang and maintain coolant or cutting fluid for long runs. Because ground drills can be more brittle than rolled variants, avoid heavy side loads and prefer controlled, axial drilling in fixed or supported setups. For questions about optimal speeds or machine compatibility, METAV Werkzeuge offers competent technical advice and workflow support. For precision metal drilling choose the MetavCUT short HSS‑G Twist Drill for stable, fast and accurate results — for technical questions or purchase guidance contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930; WhatsApp support is available at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45046-FDA Diameter: 4.6 mm Point Angle: 135° Type: Type N Execution: short Material: HSS-G Spiral/Flute Length: 47 mm Overall Length: 80 mm Shank Execution: fully ground Colour / Finish: bright finished For Drilling Machine: Drilling Machine Model Series: Standard Line Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill (Type N) is primarily intended for drilling Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Metals, Non‑Ferrous Metals and Hard Plastics, offering reliable performance where a stable short HSS‑G geometry is required. Is this Twist Drill suitable for hand drills or only machine tools? The MetavCUT Twist Drill is designed for use on Drilling Machines; while it can be used in robust portable drills, optimal results and tool life are achieved in stationary or well‑supported machine setups due to the short, stiff design. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength workpieces and larger hole diameters. The ground geometry is easy to re‑grind and withstands higher loads. Which 3 drill types exist? The three primary drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of the Twist Drill, lowering friction and therefore required feed force, while improving centring of the tip in the workpiece. Can a metal drill be used to drill wood? A Metal Drill can be used in Wood, but guidance and hole finish are poorer; however, metal drills are easier to re‑grind and exhibit less aggressive self‑feed. For which drilling depths is the Twist Drill most commonly used? Spiral drilling into solid material is commonly performed with Twist Drills; they are most frequently used for diameters up to 20 mm and drilling depths up to 100 mm. Which is better, HSS or HSSE? General assumptions that HSSE materials are always superior to HSS are incorrect; the right choice depends on working conditions and whether the higher purchase cost of HSSE is justified.
4.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Profi Line – 4.6 mm, 135° Point, Type N, Bright Finished, Short, HSS‑G, DIN 338 A Twist Drill (Type N) designed as a short HSS‑G metal drill for high‑precision work in hard materials using drilling machines. Short design for higher stability and precision HSS‑G ground for sharp, clean metal holes 135° point angle for hard materials and stainless steel Conforms to DIN 338 for short cylinder shank drills Drill harder materials faster with less feed force The HSS‑G ground geometry delivers high cutting performance: because the flute geometry is ground, the Cutting Edge is exceptionally sharp and the tool achieves up to 40% faster drilling while requiring 50% less feed force compared with conventional HSS drills. This results in shorter cycle times and less operator effort when machining alloyed and unalloyed Steel. For demanding metalworking tasks the ground geometry also improves runout and produces clean, precise Holes that reduce rework. Short overall length for higher rigidity and precision A reduced Overall Length and a shorter Projection significantly lower deflection during drilling. With a Spiral Length of 47 mm and a Gesamtlänge (Overall Length) of 86 mm, the compact design increases Stability, especially when drilling with a Drilling Machine or on stationary equipment. The Type N normal spiral is optimised for general metalworking, providing reliable chip removal and predictable behaviour when entering and exiting the workpiece. Targeted for metalworking professionals and workshop use This Profi Line short Twist Drill is intended for machinists, toolrooms and maintenance workshops that require reproducible, precise holes in materials such as Steel, Cast Iron, Tempered Cast, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. The compact form factor is particularly useful in fixtures and jigs where access is limited. If a manual Drilling Machine is used, the short design lowers chatter and improves operator confidence during series production. Ground vs rolled: what to expect and how to use it “Ground” means flutes and geometry are produced by CNC grinding rather than roll forming; the result is very sharp cutting edges and high concentricity, which produce cleaner holes in metal. However, ground HSS tools can be more brittle than rolled types and benefit from controlled cooling and moderate feed rates; they are best used on stationary machines with appropriate coolant when drilling deeper or harder materials. For safe and durable operation, ensure correct clamping and cooling, and avoid excessive side loads. Choose the MetavCUT Profi Line short Twist Drill for dependable precision in metalworking — for technical advice or to confirm suitability for your application contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technical data Designation: Twist Drill (short) Marke: MetavCUT SKU: 48046-FDA Diameter: 4.6 mm Point angle: 135° Type: Type N Execution: short Colour / Finish: Bright Finished Shaft finish: Fully Ground Spiral length: 47 mm Overall length: 86 mm Material: HSS‑G Standard: DIN 338 Intended use: Drills for metal / for Drilling Machine Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The Twist Drill (MetavCUT Profi Line Type N) is primarily used for machining high‑strength materials and larger hole diameters; its ground geometry is easy to re‑grind and withstands greater loads, making it suitable for demanding metalworking tasks where clean, precise holes are required. Which 3 drill types exist? Common drill categories are Metal drill, Wood drill and Stone/Concrete drill; the MetavCUT Profi Line short Twist Drill belongs to the Metal drill group and is optimised for steel and similar hard materials. Are you unsure whether this tool meets your requirements or need additional technical data? No problem – METAV Werkzeuge offers comprehensive, competent advice. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271
4.75mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill (Spiralbohrer) — HSS Type N, 4.75 mm, 118° tip, short, black, DIN 338 The Twist Drill (Spiralbohrer) is a short HSS Type N metal drill designed for precise drilling with a 4.75 mm diameter and a 118° tip angle for reliable centring in handheld and machine applications. Short HSS Type N for high stability 4.75 mm diameter for precise metal holes 118° tip angle for improved centring Conforms to DIN 338 for consistent quality Black finish and short length for robust handling Precision and stability for demanding metal work This short twist drill is crafted to deliver stable, repeatable holes in metal. The reduced overall length reduces overhang and minimises deflection, so accuracy increases even under higher feed forces. For operations where rigidity matters, the compact geometry ensures improved hole roundness and positional accuracy. Professionals and hobbyists benefit from consistent results when working on steel, cast iron and non-ferrous metals. Material choice and standardisation for dependable results Manufactured from HSS (High Speed Steel) and produced to DIN 338, the drill offers a balance of hardness and toughness suitable for many metalworking tasks. The HSS composition provides wear resistance and the possibility of re-sharpening, while the DIN classification guarantees dimensional and geometric conformity that supports predictable machining outcomes. This combination reduces the risk of premature failure during routine metal drilling. Geometry that helps with centring and chip evacuation The 118° tip angle and the classic Type N spiral form create favourable cutting conditions for general metalworking. A 118° tip is advantageous for reliable centring on slightly convex surfaces and for softer metals, reducing walking at the start of a hole. The flute geometry promotes chip evacuation during drilling, which helps avoid clogging in through-holes and contributes to smoother operation and longer tool life. Intended use and practical handling advice Designed primarily as a metal drill, this short twist drill is suited to both stationary drilling machines and hand-held drills provided the correct clamping and speeds are used. For best results, select lower cutting speeds for larger diameters and maintain steady feed to avoid excessive rubbing. Where very hard or abrasive alloys are involved, consider suitable coatings or alternative grades; for routine steel and non-ferrous materials, this HSS variant performs reliably. Who benefits from this tool Engineers, workshop technicians and maintenance professionals who require a compact, robust bit for accurate metal drilling will find this product advantageous. The short design suits constrained setups and repetitive production tasks where stability and re-sharpenability are priorities. The drill is intended for users comfortable with selecting appropriate speeds and clamping methods to match material and diameter. Strongly recommended: Choose the MetavCUT short HSS Type N twist drill for precise metalworking and contact METAV Werkzeuge for expert advice on matching the bit to specific materials or machine types — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 400475-FDA Diameter: 4.75 mm Spiral length: 47 mm Overall length: 80 mm Tip angle: 118° Type: Type N Material: HSS (High Speed Steel) Standard: DIN 338 Finish: black Execution: short Application: Drills for metal Suitable for: Hand drill / Drilling Machine Packaging unit: 10 Pieces Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill from MetavCUT? The MetavCUT Twist Drill (Type N, HSS) is primarily applied in the machining of high-strength materials and for larger drill diameters where robustness is required. Its form is easy to re-grind and it endures higher loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? The three main drill types are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for drilling in metal materials.
4.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS Twist Drill, 4.7 mm, 118° point angle, Black, DIN 338 The Twist Drill Type N short HSS is a precision metalworking tool designed for stable, accurate drilling in alloyed and unalloyed metals with hand and drilling machines. Short design for improved stability HSS material for durable metal machining 118° point for fast penetration in softer metals DIN 338 compliant for standardised quality Suitable for Hand and Drilling Machines Precise metal drilling with measurable benefits Designed for demanding metalworking tasks, the short Type N Twist Drill offers a clear advantage in stability and accuracy. Because the short flute length reduces overhang, the tool shows less deflection during operation, which results in more concentric holes and less rework. The HSS material (High Speed Steel) ensures toughness and wear resistance when drilling alloyed and unalloyed steels, cast iron, non‑ferrous metals and plastics. One direct benefit is fewer rejects and predictable results on production runs where repeatability matters. Built for stability and easy handling The compact geometry and DIN 338 conformity make this short twist drill especially suitable where rigidity is essential. A shortened overall length minimises bending moments, so the bit remains stable even under higher cutting forces. Use in a properly secured chuck on a Hand or Drilling Machine yields cleaner hole edges and reduces chatter, which helps to achieve better surface finish and longer tool life. For workshop environments prioritising precision, the compact design is a practical improvement over longer alternatives. Simple explanation of key technical features The 118° point angle balances centring ability and cutting efficiency: a slightly sharper tip eases entry into softer metals and Aluminium, while still performing well in general steel applications. The designation Type N denotes the normal spiral geometry suited to general metal drilling — not optimised for extremely soft timber or specialised masonry. This short HSS variant can be roll‑rolled or ground according to DIN specifications; roll‑rolled versions often show improved ductility and reduced breaking risk for small diameters under 6 mm. Who benefits and how to apply this tool Professional tradespeople and precision workshops that require repeatable, reliable holes in metal benefit most from this short HSS Twist Drill. When accurate hole position and reduced runout are priorities, the shorter length gives tangible process advantages. Start drilling at moderate speed with appropriate cutting fluid for steel work to extend tool life; reduce feed if you experience excessive vibration. For applications demanding higher wear resistance or use on very hard stainless steels, consider alternative geometries or coatings. Trusted recommendation: Opt for the MetavCUT Twist Drill Type N short HSS for robust, precise metal drilling — for expert advice and application support contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40047-FDA Diameter: 4.7 mm Spiral Length: 47 mm Overall Length: 80 mm Point Angle: 118° Type: Type N Execution: short Material: HSS (High Speed Steel) Standard: DIN 338 Colour: Black Application: Drills for Metal For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Twist Drill Type N be used on stainless steel? The MetavCUT Twist Drill Type N is suitable for many steels, including alloyed and unalloyed varieties, but for very hard stainless steels performance may be limited; in such cases a drill with a larger point angle, special coating or different grade is recommended to avoid premature wear and to maintain hole quality. For what are Twist Drills used? A Twist Drill by MetavCUT Type N is mainly applied to the machining of high‑strength materials and larger hole diameters; this form is easy to regrind and withstands higher loads, making it well suited for demanding metal drilling operations. Which 3 drill types exist? Commonly distinguished drill types are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill falls into the Metal Drill category and is optimised for metalworking tasks.
4.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill Type N — 4.7 mm, 135° tip, short HSS‑E (5% cobalt-alloyed, DIN 338) The Twist Drill Type N is a short, fully ground HSS‑E drill bit designed for precision metalworking on Drilling Machines. Short design for increased stability and accuracy 4.7 mm diameter for fine metal drilling 135° tip angle optimised for hard materials HSS‑E with 5% cobalt-alloyed for wear resistance Fully ground shank for excellent concentricity Enhanced wear resistance for demanding metalwork The short Twist Drill is manufactured from HSS‑E with 5% cobalt‑alloyed composition, which increases red‑hardness and wear resistance when machining stainless steels and other hard alloys. The 135° tip angle reduces chipping and helps maintain the cutting edge during slow, precise feeds, so the cutter stays effective longer under stress. This results in reliable hole quality and extended tool life even in tougher materials. Short geometry for superior stability and precision A reduced overhang and a flute length of 47 mm combined with an overall length of 80 mm minimise bending and vibration during drilling. The short execution improves stiffness, which is particularly beneficial when working on small‑diameter holes or in setups with limited support. The fully ground shank ensures high concentricity in the chuck, translating into cleaner bores and less runout when used in stationary or portable Drilling Machines. Practical application and recommended use cases Compliant with DIN 338 and produced in the Standard Line, this Type N Twist Drill is intended primarily for drilling metal, including alloyed and unalloyed steels, cast iron, non‑ferrous metals and selected plastics. Its geometry and material make it suitable for workshop and industrial environments where precision matters. Operators seeking a drill bit that combines serviceable sharpness with simple reconditioning will find this design easy to re‑grind and maintain. We recommend choosing the MetavCUT Twist Drill Type N for precise, durable metal drilling — for technical questions or tailored advice METAV Werkzeuge provides expert support via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 47047-FDA Type: Type N Diameter: 4.7 mm Tip Angle: 135° Material: HSS‑E Colour/Alloy: 5% cobalt-alloyed Execution: short Spiral (Flute) Length: 47 mm Overall Length: 80 mm Shank Finish: fully ground For Use In: Drilling Machine Application: Drills for metal Model Series: Standard Line Standard: DIN 338 Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) used for? The MetavCUT Twist Drill Type N is primarily employed for machining high‑strength materials and larger diameters; its geometry is easy to regrind and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is tailored for metalworking. Why are Twist Drills point‑split? Point splitting reduces the web thickness at the tip, which lowers friction and therefore requires less feed force; this also improves centring of the drill in the workpiece. Can a metal Twist Drill be used for wood? A metal drill can be used in wood, but it gives less precise guidance and a rougher finish; on the plus side, such drills are easier to regrind and have lower self‑feeding tendency. For what drilling depths is the Twist Drill most used? Solid drilling is commonly performed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect; you should evaluate whether the specific working conditions justify the higher cost of HSSE before choosing.
4.7mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — Twist Drill | Diameter 4.7 mm · 135° Point Angle · Double-sided · Bright Finished · Fully Ground Shank · Material HSS‑G The Body Drill is a double‑ended Twist Drill designed for precision metalworking and drilling machines, ideal for clean, repeatable holes in sheet metal and alloyed steels. Double‑ended design for two usable tips Fully ground HSS‑G for precise, fast cutting 135° point angle for harder materials Bright finished surface for smooth chip evacuation Short, robust geometry for sheet metal and rivet holes Faster, cleaner holes thanks to fully ground HSS‑G Fully ground HSS‑G construction gives this Twist Drill a finely sharpened cutting geometry produced by CNC grinding rather than rolling. This results in high roundness accuracy and consistently clean hole walls, which reduces rework and improves fit tolerances. For workshop and production use, the improved cutting action can deliver up to 40% faster penetration and requires noticeably less feed force, making drilling more efficient on alloyed and unalloyed steels. Robust double‑ended design that extends tool life A double‑ended, or double‑sided, configuration effectively provides two cutting tips in one tool, so when one end dulls it can be reversed for immediate reuse. This compact format is particularly advantageous for operations on thin sheets and bodywork where short, rigid drills perform best. The short overall length and bright finished surface promote predictable chip flow and reduce the risk of chatter in handheld or bench drilling applications. Optimised geometry for demanding materials With a 135° point angle, the drill tip is tuned for harder materials such as stainless steel and cast components, offering reduced skidding at the entry and improved centring. The geometry lowers the initial bite and spreads cutting forces, which is beneficial when working with tough substrates and when precise hole positioning is required. Use appropriate cooling for high‑load tasks to maintain edge life and avoid premature breakage. Practical handling and machine compatibility Equipped with a fully ground shank, this Twist Drill ensures good concentricity and secure clamping in standard drilling chucks and machines. The 58 mm overall length and 13 mm flute length are suited to typical sheet and plate tasks, while the robust HSS‑G material copes well with a range of ferrous and non‑ferrous metals, as well as hard plastics. The tool is intended for use with a drilling machine and benefits from steady feed and coolant for best results. Who benefits from this tool Workshops, bodyshops and maintenance technicians will value the combination of precision, durability and the convenience of a reversible tip. The drill is especially appropriate for tasks requiring clean, repeatable holes in thin metal assemblies, rivet preparation and repair work where changeover speed and hole quality matter. For bespoke technical advice or complex requirements, Metav Werkzeuge provides expert consultation to ensure the correct tool choice. If the reliability and cutting performance of MetavCUT tools are required for metalworking tasks, consider the Body Drill by MetavCUT and contact METAV Werkzeuge for tailored support — they offer detailed advice and technical assistance via email, phone and WhatsApp at info@metav-werkzeuge.com · +49 2822 7131930 · +49 170 2837271 Technical data Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58047-FDA Type / Execution: Double-sided / doppelseitig Material: HSS‑G Finish / Colour: Bright finished / blank Shank Finish: Fully ground / geschliffen For Drilling Machine: Drilling Machine / Handbohrmaschine Diameter: 4.7 mm Point Angle: 135° Spiral (Flute) Length: 13 mm Overall Length: 58 mm Model Series: Standard Line Application: Drills for metal / Bohrer für Metall Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and where does the Body Drill by MetavCUT excel? The Twist Drill, such as the Body Drill from MetavCUT, is primarily used for drilling high‑strength materials and larger diameters; its geometry makes it suitable for alloyed and unalloyed steel, cast materials and hard plastics. The double‑ended form offers practical redundancy—if one tip wears, the tool can be reversed to use the other tip, which is especially useful in bodywork and thin‑sheet applications. Which three drill types exist and how does the Body Drill compare? The three common drill types are Metal drills, Wood drills and Masonry/Concrete drills. The Body Drill by MetavCUT belongs to the metal drill category and is optimised for metalworking with a fully ground HSS‑G design that delivers precise holes and superior cutting action compared to generic multipurpose bits. Why are Twist Drills pointed and what benefit does the 135° point angle provide? Pointing reduces the cross‑edge at the tip and lowers friction; by sharpening the centre, the drill requires less feed force and centres more reliably. A 135° point angle, like on this MetavCUT Body Drill, is better suited to harder materials because it reduces initial cutting resistance and improves tip stability during entry. Can a metal Twist Drill be used for wood drilling? A metal drill such as the MetavCUT Body Drill can be used in wood, but it will generally provide less guidance and a rougher finish than a dedicated wood bit. Metal drills can be reground more easily and have less self‑feeding action, which may be advantageous in controlled drilling tasks but less so for fast timber work. For which drilling depths is the Twist Drill most commonly used? Twist Drills are the standard for through‑hole drilling in solid materials. They are most commonly used up to diameters of around 20 mm and depths up to approximately 100 mm; the MetavCUT Body Drill’s compact geometry is tailored to short, accurate holes in sheet and plate work. Is HSS or HSSE better for my application? The simple notion that HSSE is always superior to HSS is not universally accurate. Selection should be based on working conditions: HSS‑G, as used in the MetavCUT Body Drill, offers excellent edge sharpness and hole quality for many metalworking tasks, while HSSE may be justified where specific performance under extreme conditions warrants the additional cost. Are you unsure whether this tool meets your requirements or need further technical data? METAV Werkzeuge provides comprehensive, expert advice and support — contact them at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271.
4.7mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N extra short, 4.7 mm, 135° point, HSS‑G, bright finished (DIN 1897) The Twist Drill Type N from MetavCUT is an extra‑short HSS‑G drill bit for Drilling Machines, designed for precise metalworking in confined spaces. Extra‑short HSS‑G design for tight working spaces 135° point angle for drilling hard materials Cylindrical shank fits standard three‑jaw chucks Up to 40% faster drilling, 50% less feed force Faster, stronger performance for metalworking The extra‑short geometry of this Twist Drill increases stability and reduces the risk of breakage when working in restricted areas. The ground HSS‑G cutting edges allow for up to 40% faster penetration and require 50% less feed force compared with conventional HSS bits, which translates into less operator fatigue and higher throughput in repetitive metal drilling tasks. This makes the bit particularly effective for alloyed and unalloyed steel, cast materials and hard plastics. Reliable centring and compatibility with common chucks With a 135° point angle, the bit is optimised for harder workpiece materials and short lead‑in times. The cylindrical shank provides universal compatibility with standard three‑jaw chucks on a handheld Drilling Machine, ensuring quick tool changes and secure clamping in everyday workshop environments. For applications where torque is especially high, consider the shank type when selecting the correct chuck to avoid slippage. Practical use cases and who benefits most This Twist Drill is ideal for professionals and workshops that perform frequent small‑diameter metal drilling in thin sheet, profiles and component assemblies. Its compact length is particularly useful for tight fixture setups, angle drilling and operations near edges where a standard length would be impractical. Toolrooms, maintenance teams and metal fabricators will value the improved control and reduced breakage rate. What sets this drill apart: standards and material Manufactured to DIN 1897 specifications and produced in HSS‑G material, the bit balances wear resistance and re‑sharpenability. The bright finished surface facilitates chip evacuation while the Type N spiral is the established choice for general metal drilling. For users less familiar with technical terms: HSS‑G denotes a high‑speed steel with improved cutting properties for demanding metallic materials. Strong recommendation: Choose the MetavCUT Twist Drill Type N for precision metal drilling and contact METAV Werkzeuge for personalised technical advice via info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271) Twist Drill Marke: MetavCUT SKU: 56047-FDA Durchmesser: 4.7 mm Gesamtlänge: 58 mm Spiralänge: 24 mm Ausführung: extra short Spitzenwinkel: 135° Typ: Type N Schaftausführung: Cylindrical Material: HSS‑G Norm: DIN 1897 Farbe / Finish: Bright finished Für Bohrmaschine: Drilling Machine (Hand drill) Modellserie: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is primarily intended for metal drilling, including alloyed and unalloyed steel, cast iron and hard plastics; its extra‑short form makes it especially useful when working in confined spaces or on thin materials. Can the MetavCUT Twist Drill be used in a handheld drill? Yes, the Twist Drill from MetavCUT with a cylindrical shank is made to be clamped in standard three‑jaw chucks of a handheld Drilling Machine; ensure appropriate chuck grip when high torque is applied to prevent slippage. What is a Twist Drill used for? A Twist Drill is mainly used for machining high‑strength materials and larger drill diameters. Its shape allows for straightforward re‑grinding and it withstands substantial loads, making it suitable for demanding metalworking operations. Which three drill types exist? There are three common drill categories: metal drills, wood drills and stone/concrete drills. Why are Twist Drills re‑pointed? Re‑pointing reduces the minor cutting edge at the tip, lowering friction and required feed force while improving centring of the bit in the workpiece. Can a metal Twist Drill be used for wood? A metal Twist Drill can be used in wood, but guidance and finish are generally inferior compared with dedicated wood drills; metal bits are easier to re‑sharpen and show less self‑feed.
4.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus HSS-G-Schliff, kurzer Ausführung und 135° Spitzenwinkel sorgt für präzise, stabile Bohrungen in Stahl und Gusswerkstoffen; für Beratung und Lieferung steht Metav direkt aus Emmerich zur Verfügung. Spiralbohrer 4,7 mm (HSS-G) – MetavCUT Profi Line Der Spiralbohrer 4,7 mm in kurzer Ausführung eignet sich für präzise Metallbohrungen an stationären und handgeführten Maschinen und erfüllt die Anforderungen der DIN 338. Kurze Ausführung für höhere Stabilität Geschliffener HSS-G für saubere Bohrbilder 135° Spitzenwinkel für harte Werkstoffe Zylinderschaft, geeignet für Handbohrmaschine Normkonform nach DIN 338 Mehr Stabilität bei präzisen Metallbohrungen Dank der kurzen Auskraglänge reduziert dieser Bohrer die Neigung zum Verbiegen und erhöht die Rundlaufgenauigkeit. Die geschliffene Geometrie (HSS-G) erzeugt scharfe Schneiden und saubere Spanabfuhr, was deutlich präzisere Bohrlöcher zur Folge hat. Diese Eigenschaft ist besonders vorteilhaft beim Bohren in legierten und unlegierten Stahl sowie Gusseisen, da weniger Nacharbeit erforderlich wird und die Werkzeugstandzeit steigt. Schnelleres Bohren mit geringer Anpresskraft Die geschliffene Ausführung ermöglicht ein bis zu 40 % schnelleres Eindringen bei etwa 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten. In Kombination mit dem 135° Spitzenwinkel verkürzt sich die Anbohrzeit bei harten Werkstoffen, ohne die Bohrbildqualität zu opfern. Das Ergebnis sind effizientere Arbeitsabläufe und weniger Werkzeugwechsel in der Werkstatt. Einsatzbereiche und Anwendernutzen Konzipiert für Werkstatt, Montage und industrielle Anwendungen, ist dieser Spiralbohrer besonders geeignet für dünne bis mittlere Bleche, Profile sowie für allgemeine Metallbearbeitung mit Handbohrmaschine oder stationärer Maschine. Die kurze Ausführung macht ihn ideal für präzisionsorientierte Arbeiten, bei denen Stabilität und Maßhaltigkeit entscheiden. Anwender profitieren von konsistenten Ergebnissen und niedrigerem Ausschuss. Empfehlung: Für präzise Metallbearbeitung empfiehlt Metav den Einsatz des MetavCUT Profi Line Spiralbohrers mit HSS-G-Schliff; bei Fragen oder zur Bestellung nutzen Sie bitte die Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 48047-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Fakten Durchmesser: 4,7 mm Gesamtlänge: 86 mm Spiralänge: 47 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Stück Besonderheiten Material: HSS-G Schaftausführung: geschliffen Norm: DIN 338 Ausführung: kurz Typ: Typ N Für Bohrmaschine: Handbohrmaschine Farbe: blank FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Profi Line Spiralbohrer mit HSS-G ist ausgelegt für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff; die Kombination aus kurzem Schaft und 135° Spitzenwinkel macht ihn besonders effektiv bei harten Werkstoffen. Kann der Spiralbohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und der Zylinderschaft erlauben den Einsatz an einer Handbohrmaschine; für sehr präzise Passungen ist jedoch eine stationäre Maschine ratsam. SKU 48047-FDA ist speziell für praxisnahe Werkstattanwendungen konzipiert. Was bedeutet geschliffen (HSS-G) im Vergleich zu gewalzten Bohrern? Geschliffene Bohrer (HSS-G) bieten sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; sie sind jedoch empfindlicher gegenüber Krafteinleitungen und sollten bevorzugt mit Kühlung und an stationären Maschinen eingesetzt werden. Welchen Vorteil bringt der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert die Anbohrzeit und verringert das Ausbrechen bei der Materialoberfläche, sodass insbesondere bei Edelstahl und gehärteten Stählen ein stabilerer Arbeitsprozess erzielt wird. Wie viele Bohrer sind in einer Verpackungseinheit enthalten? Die Verpackungseinheit des MetavCUT Profi Line Spiralbohrers (Artikelnummer 48047-FDA) beträgt 10 Stück.
4.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der kurze HSS-Bohrer vereint Stabilität durch reduzierte Auskraglänge und hohe Bruchsicherheit bei kleinen Durchmessern; dadurch entfällt bei vielen Metallarbeiten unnötiges Nacharbeiten. Nutzen Sie die Kombination aus HSS-Material und normgerechter Bauart (DIN 338) für präzise Ergebnisse in Werkstatt und Produktion. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT — kurzer HSS-Bohrer (Typ N, 4,8 mm) Der Spiralbohrer ist ein kurzer HSS-Bohrer für präzises Bohren in Metall an Handbohrmaschinen und stationären Bohrmaschinen. Kurz: hohe Stabilität durch geringe Auskraglänge HSS: elastisch und bruchärmer bei kleinen Durchmessern Gemäß DIN 338: kurze Spiralbohrer Spitzenwinkel 118° für einfache Anbohrung Ideal für Handbohrmaschine und Metallarbeiten HSS-Konstruktion für weniger Bruch und längere Standzeit Aus HSS gefertigt, bietet der Bohrer eine höhere Elastizität und reduziert dadurch das Bruchrisiko bei Durchmessern unter 6 mm. Die kurze Ausführung nach DIN 338 sorgt für eine verminderte Auskraglänge, was die Stabilität erhöht und Vibrationen beim Bohren in Stahl und Gusseisen reduziert. Für Anwender bedeutet das weniger Nacharbeit und längere Einsatzintervalle, ohne dass die Handhabung schwieriger wird. Die schwarze Oberfläche schützt zusätzlich vor Korrosion und erleichtert die Identifikation in der Werkstatt. Präzise Anwendung bei Metall: Vorteile und Tipps Die Typ N-Spiralform ist auf Metallbearbeitung ausgelegt und eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle sowie Kunststoffe. Der Spitzenwinkel von 118° ermöglicht ein einfaches Anbohren und gute Zentrierung auf flachen Oberflächen; bei besonders harten Werkstoffen empfiehlt sich ein größerer Winkel. Um die Lebensdauer zu maximieren, sollten Schnittgeschwindigkeit und Kühlschmierstoff an Material und Durchmesser angepasst werden. Durch die kurze Bauform reduziert sich die Gefahr des Verkippens bei Handbetrieb. Einsatzempfehlung für Werkstatt und Montage Mit einem Durchmesser von 4,8 mm fällt der Bohrer in den Standard-Bereich für universelle Werkstatteinsätze. Er ist ideal für Reparaturarbeiten, Maschinenmontage und DIY-Projekte, bei denen Handbohrmaschinen zum Einsatz kommen. Für präzise Bohrbilder empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um Wandern auf der Oberfläche zu vermeiden. Die Spirallänge von 47 mm und die Gesamtlänge von 86 mm bieten eine ausgewogene Balance zwischen Reichweite und Steifigkeit. Verpackung, Zielgruppe und Qualitätsversprechen Der Spiralbohrer kommt gebündelt in einer Verpackungseinheit zu 10 Stück und richtet sich an Profiwerkstätten sowie anspruchsvolle Heimwerker, die Wert auf zuverlässige Standardwerkzeuge legen. Hersteller MetavCUT steht für eine technikorientierte Fertigung und gleichbleibende Qualität, passend zur Philosophie von Metav Werkzeuge als Lieferant für präzise Werkstattausstattung. Die kompakte Bauform und die Normkonformität machen den Bohrer zur wirtschaftlichen Wahl für Serien- wie Einzelaufgaben. Für präzises Metallbohren die MetavCUT HSS-Ausführung wählen und direkt bei Metav Werkzeuge anfragen: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technische Daten Artikelnummer: 40048-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Typ: Typ N Fakten Durchmesser: 4,8 mm Gesamtlänge: 86 mm Spirallänge: 47 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS (Schnellarbeitsstahl) Norm: DIN 338 (kurze Spiralbohrer) Ausführung: kurz Farbe: schwarz Für Bohrmaschine: Handbohrmaschine FAQ Wie eignet sich der Bohrer für Stahlbleche? Der MetavCUT Spiralbohrer (Typ N, SKU 40048-FDA) ist für dünne bis mittlere Stahlbleche geeignet; durch das HSS-Material reduziert sich das Bruchrisiko und das kurze Design erhöht die Stabilität beim Bohren. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die Ausführung wurde ausdrücklich für den Einsatz an Handbohrmaschinen und stationären Maschinen konzipiert und liefert bei korrekter Anwendung zuverlässige Ergebnisse. Welche Materialien lassen sich mit diesem Bohrer bearbeiten? Der Bohrer von MetavCUT bearbeitet legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle sowie Kunststoff; für sehr harte Werkstoffe ist ein speziellerer Bohrer empfehlenswert. Warum ist die kurze Ausführung nach DIN 338 vorteilhaft? Die kurze Bauform verringert die Auskraglänge, was die Stabilität erhöht und das Risiko von Verbiegen oder Vibrationen beim Bohren reduziert. Wie viele Bohrer sind in der Verpackungseinheit enthalten? Geliefert wird eine Verpackungseinheit mit 10 Spiralbohrern, ideal für Werkstattbedarf und Reparatursets.
4.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 4.8 mm, 135° tip, Short, 5% cobalt-alloyed, HSS‑E, DIN 338 (MetavCUT) The Twist Drill Type N is a short configuration drill for precision metalworking, engineered for handheld drilling machines and demanding machining of harder materials. Short design for high drilling stability 4.8 mm Diameter for precise metal holes 135° Tip angle for harder materials 5% cobalt-alloyed HSS‑E for heat resistance Longer life and heat resistance through alloyed HSS Built from HSS‑E with a 5% cobalt alloy, this short Twist Drill offers improved hot hardness and wear resistance compared with standard high-speed steels. The cobalt enrichment helps maintain cutting edge integrity at elevated cutting temperatures, which is particularly beneficial when drilling stainless steel or other tough metals. As a result, users gain longer tool life and fewer tool changes during longer runs. Stable short design for precise, vibration‑reduced drilling The shortened overall length reduces cantilever and increases rigidity, making the tool less prone to bending and chatter. With a short configuration and fully ground flute geometry, this Twist Drill provides a precise cut and excellent concentricity even in handheld or portable setups. For workshop tasks that demand accurate hole placement, the reduced overhang translates directly into cleaner holes and improved repeatability. Geometry optimised for harder materials and clean entry A 135° tip angle is chosen to reduce wandering on hard surfaces and to lower the initial penetration force, which improves centring on stainless and alloyed steels. The ground geometry (HSS‑G style) yields sharp cutting lips and a defined chisel edge, producing clean bores with good surface quality. For operators who require predictable performance when starting a hole in steel, this geometry is a practical advantage. Suited uses and target users This Twist Drill in the Standard Line series is intended primarily for metalworkers, maintenance technicians and industrial workshops that perform drilling in alloyed and unalloyed steel, cast iron, non‑ferrous metals and selected plastics. The tool is a robust choice for general metal drilling tasks on portable drilling machines and small machine tools where stiffness and hole quality matter more than extreme reach. Handling, sharpening and recommended operating practice Because the flute geometry is fully ground, the drill produces fine chips and precise holes but can be more brittle than rolled types; therefore, the tool benefits from controlled feeds and adequate cooling. For best results use cutting fluid when drilling harder alloys and avoid excessive feed rates on small diameters. If regrinding is required, the ground geometry allows restoration of sharp cutting edges, but care must be taken to preserve the 135° tip form for consistent performance. MetavCUT’s Twist Drill is recommended for precise metalworking tasks — for tailored technical advice or to confirm suitability for your applications contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 47048-FDA Diameter: 4.8 mm Tip Angle: 135° Execution: Short Material: HSS‑E Spiral Length: 52 mm Overall Length: 86 mm Type: Type N Shank Execution: Fully ground Colour: 5% cobalt-alloyed Norm: DIN 338 For Drill Machine: Drilling Machine Model Series: Standard Line Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT mainly used for? The MetavCUT Twist Drill is primarily used for drilling high‑strength materials and larger diameter metal holes; its short design and ground geometry make it suitable for precision work in alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics, while offering easier regrinding and good resistance to breakage on small diameters. Which three drill types exist and how does the MetavCUT Twist Drill fit in? Common categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks with features like HSS‑E material and a Type N spiral suited to machining metals. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, lowering friction and cutting forces; by sharpening the tip the MetavCUT Twist Drill requires less feed force, centres better in the workpiece and delivers improved drilling behaviour across a range of metals. Can a metal Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but the MetavCUT Twist Drill will generally give less precise guidance and a rougher finish than a dedicated wood bit; however it is easier to resharpen and offers lower self‑feeding tendency compared with some specialised wood drills.
4.8mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Die Kombination aus HSS-G geschliffener Schneide und 135° Spitzenwinkel ermöglicht schnelle, präzise Bohrungen in Stahl und Blech; der doppelseitige Aufbau reduziert Ausfallzeiten und erhöht die Wirtschaftlichkeit. Nutzen Sie die robuste Geometrie für zuverlässige Ergebnisse und beziehen Sie das Werkzeug direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Karosseriebohrer – MetavCUT Doppelendbohrer 4,8 mm Der Karosseriebohrer von MetavCUT ist ein kurzgeführtes, doppelseitiges Bohrwerkzeug für präzise Blech- und Metallarbeiten mit Schwerpunkt auf Karosserie- und Nietlöchern. Doppelendbohrer für schnellen Spitzenwechsel HSS-G geschliffen: hohe Schnittschärfe Spitzenwinkel 135° für harte Werkstoffe Für Handbohrmaschine geeignet Spirallänge 13 mm für sauberen Spänetransport Schneller Fortschritt bei Blecharbeiten durch optimierte Geometrie Dank der geschliffenen HSS-G-Geometrie dringt das Werkzeug leichter in legierte und unlegierte Stähle ein und reduziert die erforderliche Anpresskraft. Die Spannuten wurden für sauberen Spänetransport ausgelegt, was besonders bei dünnen Blechen die Durchlaufzeit verkürzt. Dadurch ergibt sich ein spürbarer Produktivitätsvorteil bei Serien von Nietlöchern oder Reparaturarbeiten an Karosserien, ohne dass aufwendige Nacharbeit nötig wird. Langlebigkeit und Präzision durch Doppelend-Design Das Doppelend-Design bietet den praktischen Vorteil, zwei Bohrspitzen in einem Werkzeug zu haben: Sobald eine Spitze stumpf ist, kann die andere Seite genutzt werden. Das reduziert Wechselzeiten und erhöht die Wirtschaftlichkeit im Einsatz. Die geschliffene Schaftausführung sorgt für hohe Rundlaufgenauigkeit und ermöglicht saubere, präzise Bohrlöcher auch bei stationärem Betrieb mit Kühlung. Praxisgerechte Einsatzempfehlung für Werkstatt und Montage Mit einem Durchmesser von 4,8 mm fällt das Werkzeug in den Standard-Bereich für Bohrer und ist ideal für Handgeführte Akkubohrschrauber sowie stationäre Säulenbohrmaschinen im normalen Werkstattbetrieb. Empfohlen ist das Anpunkten mit einem Zentrierbohrer bei hoher Präzision; tiefe Sacklochbohrungen über das Fünffache des Durchmessers sollten vermieden werden. Diese Hinweise erhöhen die Standzeit und sichern reproduzierbare Ergebnisse. Materialhinweise, Kühlung und Sicherheit für dauerhaften Einsatz Das Material HSS-G (geschliffener Schnellarbeitsstahl) bietet hohe Schnittschärfe, kann jedoch bei unsachgemäßer Handhabung spröde reagieren. Kühlung und moderater Vorschub verringern thermische Belastung und Bruchrisiko. Für Anwendungen in Gussstahl, Temperguss oder Nichteisenmetallen liefert die Kombination aus 135° Spitzenwinkel und geschliffener Schneide saubere Einstiche und reduzierte Ausrissbildung. Empfehlung: Den MetavCUT Karosseriebohrer für präzise Blecharbeiten direkt über Metav in Emmerich beziehen – Anfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 58048-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Karosseriebohrer Ausführung: doppelseitig Fakten Durchmesser: 4,8 mm Gesamtlänge: 58 mm Spirallänge: 13 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffener Schnellarbeitsstahl) Schaftausführung: geschliffen Farbe: blank (hell) Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line FAQ Wie groß ist der Durchmesser und wofür eignet sich der Bohrer? Der Karosseriebohrer von MetavCUT mit 4,8 mm Durchmesser eignet sich für Blech-, Karosserie- und Montagearbeiten; er fällt in den Standard-Bereich und ist für Handgeführte Akkubohrschrauber und dünne bis mittlere Bleche konzipiert (SKU 58048-FDA). Warum ist HSS-G vorteilhaft für Metallbohrungen? HSS-G beim MetavCUT Karosseriebohrer bedeutet geschliffener Schnellarbeitsstahl; das Ergebnis ist eine sehr scharfe Schneide, hohe Rundlaufgenauigkeit und saubere Bohrlöcher, besonders in legierten Stählen und Gusswerkstoffen. Kann der Doppelendbohrer in einer handelsüblichen Handbohrmaschine verwendet werden? Ja, der MetavCUT Doppelendbohrer ist für Handbohrmaschinen ausgelegt; bei stationärem Einsatz mit Kühlung steigt jedoch die Standzeit deutlich. Welchen Vorteil bringt der Spitzenwinkel von 135°? Der Spitzenwinkel von 135° sorgt beim Karosseriebohrer für geringere Anbohrkräfte und bessere Zentrierung in harten Werkstoffen wie Edelstahl oder Temperguss, wodurch Einstich und Ausriss minimiert werden. Wie sollte der Bohrer gepflegt werden, um Bruch zu vermeiden? Für lange Lebensdauer des MetavCUT Karosseriebohrers empfiehlt sich moderater Vorschub, regelmäßige Kühlung bei Stahlbearbeitung und das sofortige Umdrehen des Doppelend-Tools bei beginnender Stumpfheit.
4.8mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Der Spiralbohrer von MetavCUT überzeugt durch extra kurze Bauart und HSS‑G Materialqualität, die erhöhte Stabilität und längere Standzeit bieten; der 135° Spitzenwinkel sorgt beim Bohren in härtere Werkstoffe für sicheres Eindringen. Bestellen Sie den Bohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer (HSS‑G, extra kurz) von MetavCUT Der Spiralbohrer ist ein extra kurzer HSS‑G Bohrer für präzise Metallbohrungen mit Handbohrmaschine und eignet sich besonders für dünne Bleche und beengte Arbeitsräume. HSS‑G für erhöhte Verschleißfestigkeit Extra kurze Bauart für mehr Stabilität Durchmesser 4,8 mm für Standardbohrungen 135° Spitzenwinkel für härtere Werkstoffe Zylinderschaft passend für Dreibackenfutter Kurzformat für enge Bauteile erhöht Stabilität und Sicherheit Die extra kurze Ausführung reduziert den Hebelarm und minimiert die Bruchneigung bei Handhabung, was besonders in beengten Einbauverhältnissen von Vorteil ist. Durch die kürzere Spirallänge verbleiben die Schnittkräfte näher an der Spindel, wodurch die Stabilität steigt und saubere Bohrbilder entstehen. Für Anwender, die in Profileisen oder Bleche arbeiten, bedeutet das weniger Nacharbeit und höhere Prozesssicherheit. Leistungssteigerung bei legierten und unlegierten Stählen Dank HSS‑G und geschliffener Schneide ermöglicht dieser Bohrer ein schnelleres Eindringen in Metall bei reduzierter Anpresskraft; vergleichbare Bohrer benötigen bis zu 50 % mehr Kraft. Der 135° Spitzenwinkel optimiert die Anbohrung in härtere Werkstoffe wie legierten Stahl oder Gusseisen und reduziert Auswanderung beim Ansetzen. Typ‑N Normalspirale steht für zuverlässige Spanabfuhr bei typischen Metallanwendungen. Universelle Kompatibilität mit Handmaschinen und Winkelgeräten Die Schaftausführung: Zylinder macht den Bohrer kompatibel mit gängigen Dreibackenfuttern, was die Einsetzbarkeit in Handbohrmaschine und Winkelbohrmaschine vereinfacht. Bei hoher Drehmomentanforderung ist auf kraftschlüssige Spannsysteme zu achten, da Zylinderschaften bei extremen Lasten durchrutschen können. Für den typischen Werkstattalltag bleibt die Handhabung unkompliziert und flexibel. Oberflächenqualität, Materialwahl und Pflegehinweise Die helle Oberfläche (blank) und die HSS‑G‑Legierung stehen für gute Verschleißfestigkeit und gleichbleibende Schnittgüte. Regelmäßige Reinigung und gelegentliche Schmierung des Bohrfutters verlängern die Lebensdauer; bei warm laufenden Schnitten empfiehlt sich eine passende Kühlschmierstoffzufuhr, um Überhitzung zu vermeiden. So bleibt die Bohrungsqualität konstant und die Standzeit hoch. Warum MetavCUT und Metav als zuverlässiger Partner MetavCUT liefert den Bohrer in standardisierter DIN 1897 Ausführung aus der Standard Line, was Kompatibilität und Verfügbarkeit sichert. Metav als Lieferant verbindet diese Produktqualität mit logistischer Verlässlichkeit aus Emmerich; die zentrale Versorgung reduziert Beschaffungszeiten und vereinfacht die Lagerhaltung für Industrie und Handwerk. Praxisempfehlungen für saubere Ergebnisse Für den Durchmesserbereich um 4,8 mm ist der direkte Ansatz meist möglich; bei hoher Präzisionsanforderung empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer. Beim Bohren in dünnwandige Bauteile verhindert die extra kurze Länge das Durchbiegen der Werkzeuge und sorgt für runde, maßhaltige Bohrungen. Für tiefe Löcher sind längere oder mehrstufig aufgeweitete Verfahren zu bevorzugen. Empfehlung: Vertrauen Sie auf die robuste Ausführung von MetavCUT und wählen Sie diesen HSS‑G Spiralbohrer für präzise Metallarbeiten; sichern Sie Ihr Exemplar über Metav Werkzeuge oder kontaktieren Sie unsere Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 56048-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Anwendung: Bohrer für Metall Ausführung: extra kurz Schaftausführung: Zylinder Fakten Durchmesser: 4,8 mm Gesamtlänge: 58 mm Spirallänge: 24 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (Schnellarbeitsstahl, verschleißfest) Norm: DIN 1897 Typ: Typ N (Normalspirale für Metallbohrungen) Farbe: blank (helles Finish) Für Bohrmaschine: Handbohrmaschine Hersteller: MetavCUT SKU: 56048-FDA FAQ Ist der Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (SKU 56048‑FDA) mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe und kann für viele Edelstahlarten eingesetzt werden; bei hochlegierten Edelstählen sind angepasste Schnittparameter und geeignete Kühlschmierstoffe zu wählen. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die Ausführung mit Zylinderschaft ist für Handbohrmaschine konzipiert; bei hohen Drehmomenten ist auf sichere Spannung im Dreibackenfutter zu achten, um Durchrutschen zu vermeiden. Brauche ich ein Vorbohren bei 4,8 mm? Für den Durchmesser 4,8 mm ist in den meisten Fällen direktes Bohren möglich; bei hoher Maßgenauigkeit empfiehlt sich ein Zentrierpunkt oder ein kleiner Vorbohrer zur Fixierung der Bohrstelle. Wie viele Stück sind in einer Verpackungseinheit? Die Verpackungseinheit beträgt 10 Stück, geliefert als Packungseinheit entsprechend der Artikelnummer 56048‑FDA. Eignet sich der Bohrer für tiefe Bohrungen? Die extra kurze Bauart ist nicht für sehr tiefe Bohrungen gedacht; sie wurde für Stabilität in dünnwandigen Bauteilen und beengten Bereichen optimiert. Für tiefe Löcher sind längere oder mehrstufige Bohrer zu empfehlen.
4.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der Spiralbohrer von MetavCUT überzeugt durch HSS‑G‑Schneidleistung und die kurze, geschliffene Ausführung, die höhere Stabilität und geringere Verformung beim Bohren in Stahl gewährleistet. Nutzen Sie die Kombination aus hoher Standzeit durch Materialqualität und kraftsparendem Schneidwinkel für präzise Metallbearbeitung. Bestellungen und technische Rückfragen können direkt über Metav angefragt werden. Spiralbohrer von MetavCUT – HSS‑G Kurzbohrer Der Spiralbohrer ist ein kurz ausgeführter HSS‑G Bohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. HSS‑G geschliffen für hohe Schnittgeschwindigkeit 135° Spitzenwinkel für harte Werkstoffe Kurze Ausführung für maximale Stabilität Geeignet für Stahl, Guss und Nichteisenmetalle Zylinderschaft gemäß DIN 338 für gängigen Einsatz Hohe Schnittleistung bei geringerer Anpresskraft Der Einsatz von HSS‑G sorgt für deutlich schnellere Vorschübe und eine spürbar geringere Anpresskraft im Vergleich zu herkömmlichem Schnellarbeitsstahl. Für Anwender bedeutet das weniger Ermüdung bei Handarbeiten und kürzere Bearbeitungszeiten bei Serien. Diese Materialwahl erhöht die Standzeit und reduziert Stillstandszeiten in der Werkstatt. Präzision durch kurze Bauform und geschliffenen Schaft Die kurze Ausführung und der geschliffene Schaft minimieren Auslenkungen bei der Aufnahme, sodass präzise Bohrbilder auch bei schwierigen Werkstücken erreichbar sind. Anwender profitieren von geringerer Wandraubbildung und saubereren Bohrlöchern, besonders bei gehärteten oder dickwandigen Bauteilen. Optimiert für harte Materialien und schwer zugängliche Bohrstellen Mit einem Spitzenwinkel von 135° ist dieser Bohrer speziell auf härtere Werkstoffe abgestimmt; durch den flacheren Winkel wird das Anbohren von Edelstahl und Temperguss erleichtert. Dadurch reduziert sich das Ausbrechen an der Austrittskante und die Nacharbeit verringert sich deutlich. Einfache Einsetzbarkeit und vielseitige Anwendung Die Auslegung nach DIN 338 macht den Bohrer kompatibel mit gängigen Zylinderschaft‑Aufnahmen, wodurch er sich sowohl für Handbohrmaschine als auch für stationäre Geräte eignet. Diese Vielseitigkeit erleichtert die Integration in bestehende Arbeitsabläufe und bietet eine zuverlässige Lösung für Werkstätten und Montagebetriebe. Zielgruppe und typische Einsatzzwecke Der kurze Spiralbohrer richtet sich an Profi‑Werkstätten, Metallbauer und fortgeschrittene Heimwerker, die saubere Bohrbilder in legierten und unlegierten Stählen erzielen wollen. Besonders dort, wo Stabilität und Wiederholgenauigkeit zählen, bietet dieser Bohrer einen klaren Vorteil. Für präzise Metallbohrungen den HSS‑G Spiralbohrer von MetavCUT wählen und bei Rückfragen direkt per E‑Mail info@metav-werkzeuge.com die technische Beratung anfordern. Produktmerkmale Artikelnummer: 27048-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Basic Line Norm: DIN 338 (kurze Spiralbohrer) Typ: Typ N Daten Durchmesser: 4,8 mm Gesamtlänge: 86 mm Spirallänge: 52 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Schaftausführung: geschliffen Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Farbe: blank Verpackungseinheit: 10 Anwendung: Bohrer für Metall FAQ Wie eignet sich der Bohrer für Edelstahl? Der Spiralbohrer von MetavCUT (SKU 27048-FDA) mit 135° Spitzenwinkel ist für härtere Werkstoffe wie Edelstahl geeignet, da der flachere Winkel das Anbohren erleichtert und das Ausbrechen reduziert. Welche Vorteile bietet die HSS‑G Ausführung? Die HSS‑G Ausführung des MetavCUT Spiralbohrers ermöglicht schnelleres Bohren bei geringerer Anpresskraft und erhöht dadurch die Standzeit im Vergleich zu Standard‑HSS‑Bohrern. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, dieser kurze Spiralbohrer ist für den Einsatz an Handbohrmaschine vorgesehen und bietet durch die kurze Auskraglänge bessere Stabilität bei handgeführten Arbeiten. Was besagt die Norm DIN 338 in Bezug auf diesen Bohrer? DIN 338 klassifiziert kurze Spiralbohrer mit Zylinderschaft; der MetavCUT Spiralbohrer entspricht dieser Norm und ist daher standardisiert in Länge und Schaftform für breite Einsatzmöglichkeiten. Für welche Materialien ist der Typ N geeignet? Der Typ N (Normalspirale) des Spiralbohrers ist speziell für Metall, Eisen und Stahl konzipiert und weniger für sehr weiche Werkstoffe gedacht.
4.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Profi Line Twist Drill 4.8 mm — Short HSS‑G, 135° (Type N, DIN 338, Bright Finished) The MetavCUT Profi Line Twist Drill is a short Type N twist drill engineered for precise metal drilling, featuring a 4.8 mm diameter and a 135° point angle for demanding steel and cast applications. Short design for improved stability and precision HSS‑G ground for sharpness and clean holes 135° point angle for harder materials like steel Fully ground shank for excellent concentricity Conforms to DIN 338 for standardized quality Precision and Stability for Demanding Metalwork Shorter overall length reduces overhang and therefore deflection, delivering greater positional accuracy during drilling. The short design of this twist drill, combined with a fully ground shank, results in improved stability when used in handheld or machine setups. For precision holes in metal, this geometry minimizes wander and helps achieve consistent diameters even under tougher cutting conditions. Faster Drilling with Less Feed Force Thanks to the HSS‑G (ground High Speed Steel) geometry, chip evacuation and cutting action are optimised, which can translate into up to 40% faster drilling and about 50% less required feed force compared to conventional HSS tools. The ground flute profile creates sharp cutting edges that require lower thrust, so less operator effort is needed and cycle times shorten when working in alloyed or unalloyed steel. Optimised for Metal: Applications and Machine Compatibility This Type N twist drill is primarily intended for machining Metal, including Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. It is suitable for use in Drilling Machines as well as robust Hand Drilling Machines when stability is ensured. The combination of a 135° point angle and the normal spiral flute makes it well suited to harder workpiece materials but less ideal for very soft timbers where a dedicated wood drill would guide better. DIN 338 and Ground Geometry — What That Means for Quality Manufactured to DIN 338, the tool adheres to the standard for short twist drills with cylindrical shank. The ground flute production method yields very sharp edges and high runout accuracy, producing cleaner holes and improved concentricity. Note that ground HSS drills can be more brittle than rolled variants; for extended tool life use proper coolant and avoid abrupt lateral loads. For precise, efficient metal drilling choose the MetavCUT Profi Line Twist Drill — for expert advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 48048-FDA Diameter: 4.8 mm Point Angle: 135° Type: Type N Execution: short Spiral Length: 47 mm Overall Length: 86 mm Finish/Color: bright finished Shank Execution: fully ground Material: HSS-G Application: Drills for metal For Drilling Machine: Drilling Machine Model Series: Profi Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Profi Line Twist Drill best used for? The MetavCUT Profi Line Twist Drill (Type N) is mainly used for drilling high‑strength materials and larger metal diameters; its short, ground geometry makes it especially suitable for precise metalworking in steels and cast materials. Which three drill types are commonly distinguished? Typical drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills, and the MetavCUT Profi Line Twist Drill belongs to the Metal Drills group designed for machining metallic materials.
4.8mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill (Type N) – 4.8 mm, 135° point, short, TIN‑coated, HSS‑G, DIN 338 The Twist Drill is a short Type N HSS‑G metal drill designed for precise machining in drilling machines and handheld drills where rigidity and life time are essential. Short design for higher stability and accuracy TIN‑coated for reduced wear and longer service life HSS‑G fully ground for fast penetration and clean holes 135° point angle optimised for hard materials such as stainless steel Manufactured to DIN 338 for consistent quality Precise metalworking thanks to focused geometry and coating The short Twist Drill in HSS‑G offers a geometry optimised for metalworking: the fully ground flutes produce sharp cutting edges and precise hole rounds, while the TIN‑coating significantly reduces friction and thermal stress during drilling. This combination means cleaner holes and less burr formation when working with alloyed and unalloyed steels. For users requiring repeatable accuracy in demanding operations, the reduced overhang of a short design improves concentricity and limits tool deflection, so the result is higher process reliability. Stability and efficiency from a compact construction A shorter overall length leads to noticeably improved stability during drilling, which reduces chatter and the risk of breakage when machining tougher materials. The 135° point angle is engineered to lower the initial penetration force and extend wear life when tackling hard materials like stainless steel and tempered castings. In practice, this means faster cycle times and less operator intervention for alignment, particularly useful when working on production machines or portable drilling setups where rigidity is limited. Suitable applications and target users This Type N Twist Drill is aimed at professionals and workshops that demand reliable performance on metals including steel, cast iron, copper alloys and hard plastics. Maintenance technicians, toolrooms and small manufacturers will benefit from the drill’s ability to keep tight tolerances with fewer rejects. Where multi‑material flexibility is required, the drill provides a good balance of regrindability and cutting efficiency, making it a practical choice for both repair work and serial production. Highly recommended: choose the MetavCUT short Twist Drill for precision metal drilling — for technical questions or individual application advice contact METAV Werkzeuge; Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill (short) Brand: MetavCUT SKU: 46048-FDA Type: Type N Diameter: 4.8 mm Overall length: 80 mm Spiral length: 47 mm Point angle: 135° Coating: TIN‑coated Material: HSS‑G Shank execution: Fully ground Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Execution: short Colour: TIN‑coated Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (Type N) be used on? The MetavCUT Twist Drill (Type N) is designed primarily for metalworking and works well on alloyed and unalloyed Steel, Tempered Castings, Cast Iron, Copper Alloys and Hard Plastics; its HSS‑G substrate and TIN‑coating help to extend tool life under these conditions. How does the short design of this Twist Drill improve performance? A short Twist Drill reduces overhang, which increases rigidity and lowers the tendency to bend or chatter; this results in better hole accuracy and often faster drilling, especially when machining hard materials using a drilling machine. What is a Twist Drill mainly used for? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; its form permits easy regrinding and it withstands greater loads, making it suitable for demanding metal drilling tasks. Which three drill types are commonly distinguished? Three common drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for machining metals.
4.8mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short HSS‑G, 4.8 mm, 135°, TIN‑coated The Twist Drill Type N short bit is a precision metal‑working drill for Drilling Machines, designed for stable, fast holes in alloyed and unalloyed steels and other non‑ferrous metals. Short geometry for higher stability and precision TIN‑coated surface for reduced wear and friction Fully ground shaft (HSS‑G) for sharp cutting and clean holes 135° tip angle optimised for hard materials like stainless steel Conforms to DIN 338 for short cylindrical shank twist drills Precision and faster machining thanks to short, ground geometry Short overall length combined with a fully ground HSS‑G flute geometry delivers significantly improved stability and a reduced tendency to deflect. Because the spiral length and overhang are smaller, the bit permits more accurate positioning and straighter holes even under higher cutting forces. The ground flute profile produces very sharp cutting edges, enabling up to 40% faster drilling and a requirement of roughly 50% less feed force compared with conventional HSS bits, which translates directly into less operator fatigue and higher productivity on the shop floor. Long tool life and lower friction with TIN coating A Titanium Nitride (TIN) coating forms a hard, wear‑resistant layer that reduces adhesion and heat build‑up at the cutting edge. When used with an appropriate coolant, the TIN‑coated surface noticeably lowers friction and abrasive wear, extending service life during serial or heavy‑duty metal drilling. This treatment is especially beneficial for machining alloyed and unalloyed steel, cast iron, copper alloys and hard plastics, where surface hardness and temperature can cause rapid tool degradation without coating. Optimised tip and spiral for hard materials and clean entry The 135° tip angle and Type N normal spiral make this bit especially suitable for harder workpiece materials such as stainless steel and temper castings. A larger tip angle reduces initial bite time and improves centring when starting a hole, while the standard spiral geometry supports efficient chip evacuation in metalworking. Conformity with DIN 338 ensures that dimensions and tolerances meet recognised standards for short cylindrical‑shank twist drills, supporting predictable performance in production environments. Built for professional users and demanding applications Manufactured as part of the Profi Line by MetavCUT, this short Twist Drill is aimed at professionals who require repeatable accuracy and durability in metal drilling operations. The bit suits stationary and portable Drilling Machines used in workshops and industrial settings. For tasks where rigidity, precise hole quality and reduced runout are priorities, the compact design and ground construction make this tool an efficient choice. Strong recommendation: For reliable, precise metal drilling choose the MetavCUT Twist Drill Type N short with TIN coating — METAV Werkzeuge offers expert technical advice and support by e‑mail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 41048‑FDA Diameter: 4.8 mm Tip Angle: 135° Type: Type N Execution: short Overall Length: 86 mm Spiral Length: 47 mm Material: HSS‑G Shaft Finish: fully ground Coating / Colour: TIN‑coated Application: Drills for metal / Bohrer für Metall Conformance: DIN 338 Model Series: Profi Line Intended Machine: Drilling Machine (Handbohrmaschine) Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the MetavCUT Twist Drill Type N short? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength materials and larger diameters in metalworking. Its short form provides greater stability and precision, and the combination of HSS‑G material and TIN coating makes it durable under high loads when used with suitable cooling. Which three drill types exist and where does the MetavCUT Twist Drill fit? There are three common drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N short belongs to the metal drill group and is optimised for cutting steels, cast materials and non‑ferrous metals. Can the MetavCUT Twist Drill be used for drilling wood? A metal‑type twist drill such as the MetavCUT Twist Drill can be used in wood, but guidance and hole finish are typically inferior compared with dedicated wood drills. Metal drills are easier to resharpen and show less self‑feeding, which may be an advantage or disadvantage depending on the task. Why is the tip of a twist drill often sharpened? The tip sharpening reduces the cross‑cut at the point of the Twist Drill, which lowers friction and hence the required feed force. A sharpened tip also improves centring at drill start, resulting in cleaner, more accurate holes and less tool wander.
Reliable holemaking for every production environment
Metal drill bits, primarily classed as HSS drill bits, deliver process-secure, dimensionally accurate holes across a wide range of metallic materials. Designed for both hand-held drilling and CNC series production, these twist drills maintain cutting performance at elevated temperatures and provide the toughness required for industrial workshop and machining applications.
Why these drills matter in your workflow
The core function of metal drill bits is centred on efficient material removal with consistent hole geometry and repeatable centring. Their geometry and cutting-edge design reduce the need for rework, permit drilling without prior centre-punching on many surfaces, and ensure reliable chip evacuation. In practice, this means shorter cycle times on batch runs, safer setup for manual operations, and stable performance under the demands of production.
- Increased production uptime through predictable tool life and wear behaviour.
- Better first-pass quality thanks to optimised tip geometry and cross-point design.
- Versatile material capability: suitable for structural steels, cast irons and non-ferrous metals.
- Compatibility with hand drills, pillar drills and CNC machines for workshop-to-production scalability.
Benefits you can measure
- Reduced rework rates and improved hole tolerances.
- Longer intervals between tool changes when using HSS-Co 5 or HSS-Co 8 variants.
- Improved centring and reduced walking on smooth surfaces thanks to cross-point geometry.
- Flexibility across material classes from aluminium to hardened steels when selecting the appropriate grade.
Metav as your precision partner
Metav combines decades of industry expertise with a comprehensive range that democratises precision for workshops and procurement teams. From the logistics hub in Emmerich, Metav acts as a quality filter for the European market, supporting over 48,000 customers and stocking more than 250,000 products. For buyers seeking a single, reliable source for high-performance drill solutions, Metav offers consistent availability and a professionally curated selection of metal drill bits and related tooling.
Technical data at a glance
- material: high-speed steel (HSS)
- variant: rolled HSS-R; ground HSS-G; high-alloy HSS-E
- cobalt options: HSS-Co 5; HSS-Co 8
- suitable for: alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron, aluminium, copper, brass
- geometry: typical tip angles 118° and 135°; cross-point (split point) for reduced walking
- application environments: hand drilling, pillar drill, CNC machining
Compact and reliably engineered, these metal drill bits—also referred to as HSS drill bits or twist drills—form the backbone of precision drilling operations in industrial and workshop settings.
FAQ
What distinguishes HSS drill bits from cobalt variants?
HSS drill bits provide high toughness and good performance at elevated temperatures; HSS-Co 5 and HSS-Co 8 variants add cobalt for increased hot hardness and extended tool life when machining tougher or stainless steels.
Which materials can metal drill bits handle reliably?
Metal drill bits are suitable for alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron and non-ferrous metals such as aluminium, copper and brass, depending on the selected grade and geometry.
When should I choose ground HSS-G over rolled HSS-R?
Choose ground HSS-G for higher concentricity, better chip evacuation and longer service life in production; rolled HSS-R is a cost-effective option for standard workshop tasks.
How does tip geometry affect drilling performance?
Tip angles around 118° are common for general-purpose drilling, while 135° tips and cross-point designs improve penetration and reduce walking on harder or polished surfaces.
Can these drill bits be used on CNC machines?
Yes—metal drill bits are suitable for hand-held, pillar and CNC operations; selection of grade and geometry should match the machine capability and workpiece material.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com