Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
20-50mm Three-Point Internal Micrometer Pistol Grip Touchscreen Display ISO 17025 Calibrated Wireless/USB Output - Microtech Metrology
Take advantage of the combination of ±0.003 mm accuracy, Wireless+USB data transfer and an ISO 17025 calibration certificate for reliable in‑process inspection and traceable results; order the certified set directly via Metav Werkzeuge or consult our specialists for integration advice. Three-point internal micrometer by Microtech Metrology — digital, ISO 17025‑certified, 20–50 mm The Three-point internal micrometer is a compact, digitally connected instrument designed for precision internal measurements in toolmaking, gauge production and quality control of small bores. ISO 17025 calibration certificate included 1.54" colour touchscreen display Wireless and USB data output Measuring range 20–50 mm, 4-piece set Precision suited to fine internal measurements This instrument delivers a confirmed ±0.003 mm accuracy across a 20–50 mm measuring range, placing it in the micro category used for fine mechanical parts and watch‑type components. The three‑point anvil design ensures consistent contact around the bore circumference, reducing centring error and improving repeatability compared with single‑point approaches. Built‑in mechanical adjustments (2 setting rings) allow quick compensation for wear or reference changes, while the dual measuring depths (listed as 91 + 150 mm) provide flexibility when reaching recessed features. The technical performance supports process control tasks that require micrometre‑level certainty without resorting to bench instruments. Fast data capture and ergonomic workflow Equipped with a 1.54" colour touchscreen and Wireless+USB output, the device enables direct transfer of readings into inspection software or spreadsheets for efficient documentation and SPC. The clear display and simple menu reduce operator input and measurement time, which benefits throughput on repetitive checking tasks. Supplied as a set of 4, the configuration supports staged inspections or bench backups, while the compact footprint suits bench or on‑machine checking. The digital readout keeps resolution high and interpretation unambiguous, supporting quicker decision‑making in production environments. Traceability, certification and workshop readiness Delivered fully calibrated with an ISO 17025 calibration certificate, the instrument meets traceability requirements for formal quality systems and laboratory procedures. The certificate documents measurement uncertainty and reference standards, simplifying the acceptance of results during audits. Microtech Metrology’s digital internal micrometer is thus ready for integration into documented quality processes and can serve as a portable reference for first‑article inspection, incoming goods control or toolroom verification. The combination of calibration, digital output and compact design supports a pragmatic route to measured confidence in everyday industrial use. Contact Metav Werkzeuge for specification support and to obtain the ISO 17025‑certified Microtech Metrology three‑point internal micrometer set (SKU 133572050) for immediate integration into existing inspection routines. Technical data SKU: 133572050 GTIN: 4061905041631 Manufacturer: Microtech Metrology Facts Measuring range: 20–50 mm Accuracy: 0.003 mm Display: 1.54" colour touchscreen Measuring depth: 91 + 150 mm Adjustment rings: 2 Pieces per set: 4 Data output: Wireless + USB Calibration: ISO 17025 certificate included Special features Digital: true Colour touchscreen interface Wireless and USB connectivity Supplied as a set ISO 17025 calibrated and certificated eClass: 21170335 ETIM: EC003590 FAQ Is an official calibration certificate supplied with the instrument? The Microtech Metrology three‑point internal micrometer is delivered fully calibrated and includes an ISO 17025 calibration certificate. What data outputs are available for automated recording? Readings can be exported via Wireless+USB, allowing the Microtech instrument to interface with inspection software or data loggers. What measuring range and depths are covered by the set? The set covers a 20–50 mm range with two measuring depth options listed as 91 + 150 mm, suitable for shallow and deeper bores. How many pieces are in the supplied set and what is the SKU? The product is supplied as a 4‑piece set; SKU: 133572050. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-50mm Three-Point Internal Micrometer Self-Centring Set, 4 Pieces in Case - Metav IndustryLine
Take advantage of a self-centring three‑point system together with wear‑resistant carbide measuring faces and a fine 0.005 mm analogue graduation for repeatable blind‑hole measurements. Order the set directly via Metav Werkzeuge or contact our consultants for advice on matching extensions and gauges to specific bores. Three‑point internal micrometer MS908.673 — self‑centring, 0.005 mm analogue The Three‑point internal micrometer MS908.673 is an analogue, self‑centring inside micrometer designed for precise measurement of blind holes in fine mechanical and workshop applications Self‑centring three‑point measuring system Hardmetal measuring faces (carbide) Analogue resolution 0.005 mm Designed for blind‑hole measurement Repeatable centring for reliable results The micrometer’s defining benefit is its self‑centring three‑point head, which aligns reliably in blind bores and reduces off‑axis error during measurement. This design converts operator input into a consistent contact geometry, lowering variance between individual readings and helping to meet process tolerances with fewer rechecks. The analogue graduation with 0.005 mm division gives a clear, immediate view of dimensional changes; when traceable comparability is required, the instrument’s mechanical simplicity supports straightforward in‑house verification routines. Built for longevity and stable contact Measuring faces made from carbide (hardmetal) ensure high wear resistance where repeated contact with bore edges would otherwise round or score softer contacts. The harder contact points preserve nominal diameter and shape over long production runs, translating into lower replacement frequency and a steadier measuring baseline. Where repeatability over time matters for quality control, the combination of robust contact materials and the three‑point geometry yields consistent seating in the bore and predictable measurement behaviour. Practical set composition and extension options Supplied as a set of four, this analogue internal micrometer covers a practical range for precision blind‑hole work and fast gauge changes between nominal sizes. Extensions are available up to 150 mm, enabling larger or deeper bores to be reached without sacrificing centring performance. The instrument is analogue by construction, making it straightforward to use alongside existing mechanical measuring tools; shops that prefer simple, robust gauges will appreciate the minimal maintenance and easy field adjustments afforded by the setting rings. Clear advantages in process environments In repetitive inspection tasks or small‑batch production, the instrument’s self‑centring function reduces operator training time and speeds routine checks. The carbide faces and solid construction lower total cost of ownership by reducing wear‑related drift; together with the fine analogue graduation, these characteristics deliver a balance of durability and measurement fidelity that supports reliable quality control in component manufacture. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine three‑point internal micrometer MS908.673 and available extensions fit into current inspection routines and to request a tailored quotation Technical data Article number: MS908.673 Manufacturer: Metav IndustryLine Category: Messschrauben Measuring principle: Analogue (mechanical) Facts Measuring range: 20–50 mm Reading / graduation: 0.005 mm Pieces per set: 4 Extension option: 150 mm Special features Self‑centring three‑point design Hardmetal (carbide) measuring faces Suitable for blind‑hole measurements Analogue nonius graduation FAQ What measurement range does the instrument cover? The set covers a 20–50 mm measuring range, supplied as a set of four sizes to allow quick changes between nominal diameters. Is the micrometer suitable for blind‑hole bores? Yes — the instrument is explicitly designed for blind‑hole measurements, its three‑point, self‑centring head ensuring reliable seating where standard internal callipers may not centre. What is the smallest readable increment on the scale? The analogue nonius offers a 0.005 mm graduation for fine visual readings and repeatable comparison checks. Are extension rods available for deeper bores? Extension rods up to 150 mm are available to access deeper or recessed bores while maintaining the self‑centring capability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-50mm Three-Point Internal Micrometer With Setting Ring And Extension In Plastic Case - Metav IndustryLine
Compact, accurate and workshop‑ready: the set combines 0.005 mm accuracy, blind‑hole capability and practical accessories for reliable bore measurement. Benefit from fast centring, clear vernier reading and secure transport packing — order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Three-point internal micrometer set M312.686 — 20–50 mm range, 0.005 mm accuracy (Metav IndustryLine) The three‑point internal micrometer set M312.686 is an analogue instrument designed for precise measurement of blind bores and small internal diameters in fine mechanical and workshop environments. 20–50 mm measuring range Accuracy 0.005 mm Suitable for blind-hole measurement Includes setting ring and extension Delivered in protective case Reliable centring and consistent bore measurement The three‑point design ensures automatic centring in the bore, reducing eccentricity and providing reproducible readings even in short or blind holes. With a measuring range of 20–50 mm this tool sits in the micro class for fine mechanical work, offering 0.005 mm accuracy that meets tight inspection tolerances. The analogue vernier scale and matt‑chrome finish on the scale and vernier minimise reflection and simplify visual reading, while robust measuring faces guarantee stable contact and long service life. Workshop‑ready set with practical accessories Supplied as a set of four pieces, the instrument includes a setting ring and an extension 150 x Ø16.7 for deeper bores, enabling flexible use across typical workshop tasks. The components are housed in a protective case for safe transport and storage, and the matt‑chrome‑plated scale and vernier resist wear in daily use. The combined mass supports steady handling during measurement; the set’s balanced design helps reduce operator‑induced deviation and accelerates routine inspection cycles. Tactile handling and dependable inspection results Designed for machinists, toolmakers and quality inspectors, the analogue three‑point system offers tactile feedback that aids controlled measuring force and repeatability. The presence of defined measuring faces and an intuitive adjustment ring speeds setup and minimises downtime between checks. For production and maintenance applications where blind‑hole verification and consistency matter, this internal micrometer set supplies a practical, high‑precision solution that supports efficient decision‑making on the shop floor. For accurate blind‑hole inspection with Metav IndustryLine quality, request the three‑point internal micrometer set M312.686 through Metav Werkzeuge or speak to our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for specification guidance and delivery options Technical data Article number: M312.686 GTIN: 4054469120379 Brand: Metav IndustryLine SKU: M312.686 Measurements / core technical data Measuring range: 20–50 mm Accuracy: 0.005 mm Pieces per set: 4 Extension: 150 x Ø16.7 Weight: 4.6 kg Adjustment rings: 25 + 40 Materials / special features Scale and vernier matt‑chrome plated Analogue vernier instrument Suitable for blind‑hole measurements Includes setting ring and extension Delivered in protective case Measuring faces included FAQ What measuring range does the set cover? The three‑point internal micrometer set covers a 20–50 mm measuring range suitable for fine internal diameters. Is the tool suitable for blind‑hole measurements? Yes. The three‑point geometry of the M312.686 is designed specifically for blind‑hole measurement and provides reliable centring in such applications. What accuracy can be expected during inspection? The analogue instrument achieves an accuracy of 0.005 mm, which is appropriate for precision workshop and toolroom checks. Which accessories are supplied with the set? The delivery includes a setting ring and an extension (150 x Ø16.7) to extend reach into deeper bores; all parts are stored in a protective case. Who benefits most from this instrument? Machinists, toolmakers and quality control technicians benefit from the tactile handling, automatic centring and repeatable results offered by this internal micrometer set (M312.686). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-50mm Three-Point Internal Micrometer, Colour 1.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
The combination of ISO 17025 traceable calibration, Wireless+USB data output and a compact 20–50 mm measuring range ensures dependable, audit-ready internal measurements. Order the set via Metav Werkzeuge or contact our advisors for specification guidance. Three‑point internal micrometer — digital internal measuring instrument with Wireless+USB Three‑point internal micrometer designed for fast, repeatable bore measurements in inspection labs and production environments with an integrated touchscreen display Digital colour touchscreen 1.5" Wireless and USB data output Calibrated to ISO 17025 with certificate Measurement range 20–50 mm, depths 90/150 mm Repeatable bore measurement with three‑point contact The three‑point design provides a self‑centring contact geometry that minimises alignment error and delivers consistent readings over a production run. With a measuring span of 20–50 mm and two measuring depths (90 and 150 mm), the instrument suits small to medium bores where high repeatability is required. The mechanical contact system reduces the influence of operator misalignment, while the digital readout simplifies logging of individual results. Embedded digital workflow and data integrity Equipped with a 1.5‑inch colour touchscreen and both Wireless+USB interfaces, the micrometer integrates directly into data collection systems and SPC routines. Live readings can be exported without manual transcription, cutting administrative time and reducing transcription errors. The digital output supports traceable measurement records, making this tool suitable for laboratory environments and production lines that require rapid data capture and archival. Calibration standard and quality assurance Delivered fully calibrated to ISO 17025, the instrument arrives with a calibration certificate that documents measurement traceability and uncertainty. This level of accreditation meets many quality‑management and regulatory requirements, giving procurement and quality teams confidence in the metrological status of the device. The calibration certificate is included in the delivery and facilitates immediate use within certified inspection processes. Practical handling, set concept and application examples Supplied as a set of four, the package is intended for serial inspection tasks where quick tool exchange and consistent setup are needed. The compact digital unit and intuitive touchscreen reduce training time for operators while the robust contact design supports routine use in production, toolroom and quality control settings. Typical applications include bore inspection on machined components, assembly fixtures and small hydraulic parts. For audit‑grade internal measurement solutions from Microtech Metrology, contact Metav Werkzeuge in Emmerich for expert advice and delivery options; our technical consultants will assist with fit‑for‑purpose selection and integration into production systems. Technical data Article number: 133372050 GTIN: 4061905074387 Manufacturer: Microtech Metrology Digital display: Colour 1.5‑inch touchscreen Data output: Wireless + USB Set contents: 4 pieces Facts Measurement range: 20–50 mm Measuring depth: 90 + 150 mm Digital: yes ISO 17025 calibration: included Special features Three‑point self‑centring contact geometry Wireless and USB interfaces for data logging Delivered with calibration certificate (ISO 17025) Designed specifically for internal/bore measurements FAQ What measurement range does the instrument cover? The three‑point internal micrometer covers a measuring range of 20–50 mm with measuring depths of 90 mm and 150 mm, suitable for small to medium bores. Is the device delivered calibrated? Yes. The tool is supplied fully calibrated to ISO 17025 and includes the calibration certificate for audit and quality records. How are measurement results transferred to a PC or network? The unit provides Wireless and USB interfaces and an integrated 1.5‑inch colour touchscreen for local reading and digital export to SPC systems. Is this micrometer sold as a single instrument or a set? This article is supplied as a set of four pieces to support serial inspection and quick interchangeability in production workflows. Which applications suit this internal micrometer? The instrument is designed for internal/bore measurements in inspection labs, production quality control and toolroom checks where repeatable bore measurement and data traceability are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200 mm Extension Ø28 mm Rod Internal Gauge Extension, - Metav IndustryLine
Extend measuring reach with the 200 mm, Ø 28 mm extension that maintains alignment and repeatability for rod inside micrometer sets; the accessory provides straightforward compatibility with common inside micrometer kits and adds stable reach for deep bores. Order the extension directly via Metav Werkzeuge or ask our consultants if needed. M310.066.5 — 200 mm extension bar Ø 28 mm for rod inside micrometer sets (Metav IndustryLine) The M310.066.5 extension bar increases measuring range for rod inside micrometer sets, enabling reliable internal measurements in deeper bores and cavities while preserving alignment and instrument stability. 200 mm extension length Ø 28 mm shaft diameter Compatible with 310.065 / 310.066 / 310.067 Accessory for rod inside micrometer sets Increase reach without compromising repeatability The 200 mm extension expands the measurable depth of rod-style inside micrometers, allowing access to recessed bores and larger assemblies without replacing the base instrument. By matching the instrument interface and maintaining a consistent shaft diameter of Ø 28 mm, the extension minimises play and helps retain the same measuring geometry that the base set provides. This preservation of alignment translates into fewer setup adjustments and a more efficient inspection flow when multiple measurements are required on a single component or across a production batch. Seamless integration for dependable measurements Designed as an accessory for established inside micrometer kits, the extension ensures compatibility with the indicated models and fits into existing workflows. The added mass and dimensions contribute to measurement stability across the extended range, reducing sensitivity to minor hand movement and easing repeatable positioning. As a consequence, process throughput benefits: fewer tool changes, reduced downtime and a more straightforward calibration routine when the extension is used in conjunction with the original measuring set. The product reference is supplied as M310.066.5 to simplify ordering and document traceability. Reliable supply and a sensible upgrade path This extension bar fits naturally into a measured metrology strategy where reach must be increased without extensive investment in new instruments. As part of the Metav IndustryLine, the accessory complements standard inside micrometers and helps harmonise a workshop’s toolset: one base instrument, multiple extension options. Metav’s approach to distribution ensures access to a wide product range, transparent logistics and a European quality filter that supports predictable deliveries and consistent product performance. If further specification details are required, technical advisors can provide guidance on integration and measurement planning. Contact Metav Werkzeuge today for availability details and to specify the correct extension for an existing inside micrometer set; delivery and expert advice are available from Emmerich. Technical data Article number: M310.066.5 GTIN: 4054469160986 Weight: 6 kg Customs tariff number: 90173000 Dimensions & core data Length: 200 mm Diameter: 28 mm Mass: 6 kg Features & compatibility Compatible with models 310.065, 310.066, 310.067 Accessory for rod inside micrometer sets Category: Accessory (Zubehör) Extension designation: 200xØ28 FAQ Which instruments is this extension compatible with? The extension M310.066.5 is compatible with the listed inside micrometer models 310.065, 310.066 and 310.067 and is intended as an accessory for rod-style inside micrometer sets supplied under the Metav IndustryLine brand. How does the extension affect measurement repeatability? Used together with a matching inside micrometer set, the 200 mm extension and Ø 28 mm shaft preserve the measuring geometry and contribute to stable repeatability by reducing lateral play and easing consistent positioning. Is the extension suitable for deep bore measurements? Yes, the extension increases usable reach for internal measurements and is designed to access deeper bores and recessed features when combined with the appropriate rod inside micrometer set. What information is included on delivery documentation? Delivery includes the article reference M310.066.5 and the GTIN 4054469160986 to support traceability and stock management within inspection and procurement records. Can the extension be used with calibration records of the base instrument? The extension should be recorded in measurement procedures where it changes the effective gauge length; compatibility with the instrument’s calibration status should be confirmed within the quality documentation for the inside micrometer set. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Internal Setting Gauge With Lapped Measuring Faces - Metav IndustryLine
Take advantage of finely lapped measuring faces, a 200 mm range and laboratory-grade accuracy of ±0.004 mm to ensure repeatable internal setting results; order the setting gauge directly via Metav Werkzeuge or contact our advisors for application guidance. M311.085 Setting gauge for internal measurement, 200 mm – Metav IndustryLine M311.085 Setting gauge for internal measurement provides a stable reference for setting and checking internal two‑point measuring instruments in workshop and inspection environments. Finely lapped measuring faces 200 mm measuring range Calibrates two‑point internal micrometers Compact accessory for workshop use Consistent reference for internal micrometer setup The setting gauge offers finely lapped measuring faces that serve as a reliable contact reference when adjusting internal measuring tools. As a purpose-built accessory for internal measurement, it converts a comparison task into a rapid, repeatable procedure, reducing adjustment time and human error. The instrument’s 200 mm span places it in the Standard category for gauges used across general machine and metalworking shops, where a balance of reach and stiffness is required to keep results reproducible over typical workshop tasks. Accuracy and measurement security for quality control With a declared accuracy of ±0.004 mm, the device supports tight tolerance work and quality‑control routines where small deviations are critical. This level of precision makes the gauge suitable as a reference for calibration checks and setup operations, enabling technicians to verify two‑point internal micrometers against a traceable standard. The clear specification of accuracy helps maintain process control and supports compliance with internal inspection plans. Practical handling and workshop efficiency Designed as an accessory rather than a primary measuring instrument, the gauge’s compact format simplifies integration into bench routines and fixture setups. The combination of a robust contact surface finish and an ergonomic footprint reduces repositioning effort and speeds up repetitive calibrations. Where throughput matters, using a dedicated setting standard shortens setup cycles and lowers the risk of scrapped parts by ensuring measuring instruments are adjusted to a defined reference before production measurement begins. Application scenarios and compatibility Engineered for use with internal, two‑point micrometers and similar comparators, the gauge suits inspection benches, toolrooms and maintenance workshops needing reliable internal-setting references. As an accessory from Metav IndustryLine, it complements broader measuring equipment inventories and supports systematic calibration workflows. Where traceability is a procurement requirement, the gauge can be integrated into regular check intervals to underpin measurement consistency across shift changes and multiple operators. For specification matching, supply or technical advice contact Metav Werkzeuge in Emmerich; our specialists will advise on suitability and delivery for workshop or inspection use Technical data Article number: M311.085 GTIN: 4054469119229 Brand: Metav IndustryLine ECLASS: 21170102 Customs tariff number: 90173000 Core data Measuring length: 200 mm Accuracy: 0.004 mm Special features Finely lapped measuring faces Designed for setting two‑point internal micrometers Accessory classification: workshop/inspection use Compact, bench‑friendly format FAQ How is this setting gauge used with internal micrometers? The setting gauge is used as a stable reference surface against which two‑point internal micrometers are adjusted; the M311.085 allows the micrometer to be set to a known dimension before taking production measurements. Is the M311.085 suitable for workshop quality control? Yes, the M311.085 from Metav IndustryLine is designed as an accessory for workshop and inspection use, offering the repeatability needed for routine calibration checks. What level of accuracy can be expected from the gauge? The gauge specifies an accuracy of ±0.004 mm, making it appropriate for tasks that require fine internal measurement adjustments and reliable reference checks. Can this gauge replace a full calibration service? The gauge provides a stable reference for everyday setting and verification; it does not replace accredited calibration services when formal traceability or certification documentation is required. Which instruments pair best with this setting gauge? Two‑point internal micrometers and internal comparators are the primary companions for the M311.085, using the gauge’s lapped faces as a reference for adjustment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Setting Gauge For Micrometer, Accuracy ±0.0035 mm, Ø8 mm, With Heat Shield - Metav IndustryLine
Take advantage of a 200 mm reference length combined with ±3.5 µm setting accuracy and integrated thermal protection for repeatable micrometer setup and stable workshop throughput. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Precision setting gauge M304.316 — 200 mm reference, ±3.5 µm accuracy, thermal protection (Metav IndustryLine) Precision setting gauge M304.316 provides a compact and robust reference for setting external micrometers and verifying measuring equipment in production and calibration environments. 200 mm reference length ±3.5 µm setting accuracy Integrated thermal protection Flat measuring faces, compact handling Consistent reference and measurable accuracy for production control The M304.316 acts as a stable reference standard for external micrometer adjustment, offering a nominal length of 200 mm and a stated accuracy of ±0.0035 mm (±3.5 µm). This level of precision supports reliable zeroing and verification of micrometers used in quality control and routine setup. By converting manufacturer tolerances into a reproducible baseline, the gauge reduces rework and contributes directly to process reliability and throughput. Thermal protection that stabilises readings in shop conditions Equipped with thermal protection, the gauge is designed to mitigate the effects of temperature differences between tool, workpiece and operator—common causes of drift in small-length references. The heat-shielding feature helps maintain dimensional stability during transfer from storage to the workbench and while taking successive settings, improving repeatability when conditions vary across shifts or machines. Practical geometry and handling for fast workstation use The device features flat measuring faces and a compact form factor with a diameter of 8 mm on the reference shank and a mass of 0.2 kg, enabling steady handling and secure seating in micrometer anvils. Its balanced weight and face design simplify alignment and minimise rocking during engagement, so setup time is shortened and the risk of measurement artefacts from operator handling is reduced. Designed for workshop and calibration tasks Built as an accessory for micrometer adjustment, this reference is suited to maintenance shops, production lines and calibration benches where quick, repeatable checks are required. The robust construction and clear dimensional definition let production teams and metrology technicians implement consistent setting routines that support traceable quality management and minimise measurement-related stoppages. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M304.316 can standardise micrometer adjustment in your process; technical advice is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M304.316 GTIN: 4054469116679 Customs tariff: 90173000 Core measurements Nominal length: 200 mm Accuracy: ±0.0035 mm (±3.5 µm) Diameter (D): 8 mm Weight: 0.2 kg Special features With thermal protection Flat measuring faces Category: Accessories (measuring instruments) ECLASS: 21170102 Story trigger: Zubehör FAQ What is the primary purpose of this gauge? The M304.316 is a precision setting gauge intended as a reference for adjusting and checking external micrometers in workshops and calibration areas. What accuracy can be expected when using the gauge? The gauge specification lists an accuracy of ±0.0035 mm (±3.5 µm) for the 200 mm reference length. Does the gauge include measures against thermal drift? Yes, the device is supplied with thermal protection, which reduces dimensional change due to temperature differences during handling and setup. What are the measuring faces like? This reference has flat measuring faces, designed for secure seating and consistent contact with micrometer anvils. Which identifiers and dimensions should be noted for ordering? Reference SKU: M304.316; GTIN: 4054469116679; nominal length 200 mm; weight 0.2 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Setting Gauge Whitworth 55 Thread Adapter - Microtech Metrology
Take advantage of a concise 200 mm reference length and explicit Whitworth 55 thread compatibility to speed up setup and improve repeatability; order the setting gauge directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Metrology Setting Gauge — 200 mm, Whitworth 55 The setting gauge is a precision accessory for thread-related measurement and fixture alignment, designed for use as a reference in workshop and bench setups. 200 mm reference length Whitworth 55 thread reference Accessory for metrology instruments Compact workshop-compatible format Rapid, reliable alignment for Whitworth threads The Whitworth 55 designation identifies the gauge as a reference for components and tooling that follow the Whitworth thread form. As a dedicated thread reference, the instrument simplifies the alignment of gauges and comparators by providing a clear physical datum, reducing iterative adjustments. This focused function supports faster setup times and more consistent results across repeated checks, which translates into fewer process interruptions and lower rework rates in routine workshop tasks. A practical length that balances reach and handling With a nominal 200 mm length, the reference bar sits within the standard workshop range that offers a pragmatic compromise between reach and rigidity. This format is well suited to bench use and small jig work where a longer master would add unnecessary bend and a shorter one would limit application. The chosen length therefore aids reproducible positioning while remaining easy to handle and store within a typical metrology environment. Intended as a measuring-system accessory for repeatability Marketed as an accessory, the reference bar integrates with measuring instruments and inspection setups to create a repeatable datum for thread checks and fixture verification. When introduced into a measurement chain, the gauge acts as a fixed comparative scale, enabling clearer pass/fail decisions from comparators or visual inspection aids. This role emphasises practicality: the product supports existing inspection workflows rather than replacing primary gauges, helping workshops improve throughput with minimal process change. Clear identification and workshop suitability Identification data such as SKU and GTIN are provided in the technical details to ensure traceability within procurement and inventory systems. The short, descriptive feature set makes the item straightforward to classify when consolidating metrology accessories for stores or job-specific kits. As an accessory intended for routine use, it is positioned to complement established tool sets, supporting consistent measurement practice without overcomplicating workshop procedures. Arrange supply via Metav Werkzeuge for the 200 mm Whitworth 55 setting gauge; Metav's Emmerich team can advise on workshop integration and availability Technical data Article number: 110720020 GTIN: 4061905460067 Manufacturer: Microtech Metrology Category: Accessory (Zubehör) Facts Length: 200 mm Special features Whitworth 55 thread reference Type: Setting gauge Application: Metrology accessory for thread and fixture alignment FAQ What is the primary function of this setting gauge? The setting gauge by Microtech Metrology is intended as a reference for thread-related setup and alignment, specifically for Whitworth 55 profiles. Which thread form does the gauge correspond to? The gauge is designated for the Whitworth 55 thread form and is suitable where that standard is used as a reference datum. What is the nominal length and how does that affect use? The nominal length is 200 mm; this length offers a balance between reach and rigidity for bench and workshop setups. Is traceability information available for ordering and inventory? Yes, the item is listed with SKU 110720020 and GTIN 4061905460067 for procurement and stock control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200-2200mm Digital Micrometer With IP65 Protection, ISO 17025 Calibration Certificate - Microtech Metrology
Take advantage of a robust, wide‑range measuring solution that combines a 200–2200 mm measuring span, IP65‑protected digital electronics and an ISO 17025 calibration certificate for reproducible inspection results; order this precision instrument via Metav Werkzeuge or consult our specialists for selection support. Outside micrometer — Digital, IP65 protection, 200–2200 mm (Microtech Metrology) A outside micrometer designed for large‑format dimensional checks across the workshop and inspection bench, offering a calibrated measuring solution for heavy‑duty components. Wide measurement range 200–2200 mm IP65 digital head for harsh environments Supplied with calibration certificate ISO 17025 Ratchet stop and Ø50 mm measuring faces High‑precision span for large components This instrument delivers a 200–2200 mm measuring range, placing it in the Extra‑Long class suitable for large shells, housings and shafts where single‑pass checks reduce setup time. The device combines a fine 0.001 mm display resolution with a declared accuracy of 0.04 mm, which supports reliable decision‑making during in‑process inspection and final acceptance. The generous Ø50 mm measuring faces distribute clamping forces and help preserve part surfaces while maintaining repeatability across long spans. Robust electronics and traceable calibration for production control Equipped with an IP‑rated digital head (IP65) the unit tolerates coolant spray and workshop dust, so readings remain legible in demanding environments. A full calibration certificate issued to ISO 17025 (ILAC MRA recognised) is supplied, enabling direct inclusion in quality documentation and easing traceability for audit purposes. The package also contains setting rods for quick verification of zero and reference checks, supporting a controlled measurement routine without auxiliary equipment. Practical design for heavy‑duty workshop use The instrument features a friction‑type ratchet stop (ratchet stop) to standardise closing force and reduce operator‑induced variation during repetitive checks. Built for large parts, the assembly is substantial — listed weight indicates robust construction and may require two‑person handling for the longest assemblies; this stability contributes to reproducible results over long spans. Intended as a workshop‑grade measuring instrument, the construction and calibrated electronics make it suitable for production inspection, incoming goods control and fixture verification. Efficient inspection with measurable benefits By combining wide range, repeatable closing mechanism and accredited calibration, the micrometer reduces the need for multiple tools or repeated setup steps. This concentrates inspection tasks and shortens throughput time while ensuring measurement results feed directly into quality procedures. The calibrated digital readout supports clear pass/fail assessment and documentation, helping teams maintain consistent quality standards across shifts. Contact Metav Werkzeuge for an application review and a tailored supply proposal for the Microtech Metrology digital micrometer with ISO 17025 calibration; reach our specialists at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: 110172201 GTIN: 4061905039430 Manufacturer: Microtech Metrology Digital display: yes Protection class: IP 65 Calibration: ISO 17025 (certificate included) Facts Measurement range: 200–2200 mm Resolution: 0.001 mm Accuracy: 0.04 mm Measuring faces: Ø50 mm Weight: 25 kg Special features Ratchet stop (friction wheel) Setting rods included Wide‑range CertiMet digital micrometer head Supplied with ISO 17025 calibration certificate (ILAC MRA) FAQ What measurement range does the instrument cover? The outside micrometer from Microtech Metrology (SKU 110172201) covers 200–2200 mm, categorised as Extra‑Long for large components such as housings and shafts. What resolution and accuracy are provided? Resolution is 0.001 mm on the digital readout and accuracy is specified as 0.04 mm, suitable for workshop inspection and most production control tasks. Is the micrometer delivered calibrated and traceable? Yes. A calibration certificate issued to ISO 17025 is included, enabling direct traceability and audit‑ready documentation. Can the instrument withstand workshop conditions? The digital head is rated IP65, offering protection against dust and low‑pressure water jets; combined with its robust construction, this makes it suitable for regular workshop environments. What are the measuring face dimensions and closing aid? Measuring faces are Ø50 mm and the device includes a friction‑type ratchet stop to standardise closing force and improve repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200-2200mm Large-Range Bore Micrometer With Colour Touchscreen, ISO17025 Calibrated - Microtech Metrology
Take advantage of sub‑micron performance, extensive wireless data handling and a full ISO 17025 calibration certificate to secure reproducible results across production and inspection. Order directly via Metav Werkzeuge or consult our specialists for integration advice and delivery options. Microtech DataMet Digital Outside Micrometer — 200–2200 mm, 1.5" Touchscreen The Microtech DataMet Digital Outside Micrometer is a high‑range, industry‑ready measuring instrument designed for large‑component dimensional checks and data‑centric quality workflows. Wide 200–2200 mm measuring range ISO 17025 calibration certificate included 2,000‑value memory with statistics Wireless and USB data transfer CNC‑machined aluminium housing Precision and consistency for large‑format measurement The DataMet system combines a large measuring span with a fine reading resolution of 0.0001 mm, delivering reliable repetition even on substantial workpieces. The instrument’s design targets production and fixture shops where long spans must be measured without sacrificing accuracy: a robust frame reduces deflection, while the sizeable Ø50 mm measuring faces ensure stable contact on broad surfaces. The integrated reading and sub‑micron capability translate into fewer remeasures and a measurable reduction in process variation, so inspection routines become both faster and more dependable. Streamlined data collection and Industry 4.0 connectivity Connectivity is a core strength: the micrometer features wireless (HID) and USB HID transfer modes, direct syncing to the MDS app across major platforms and an optional MODBUS RTU (RS‑485) interface for PLC integration. Onboard, the 2,000‑value memory, folder system and statistics mode support batch audits and traceable sampling without a PC. The colour 1.5" touchscreen and the DataMet MICS software provide on‑screen graphs (2D mode), Go/NoGo checks, max/min capture and temperature compensation, enabling immediate decision‑making at the bench and straightforward integration into digital inspection routines. Durable construction and calibrated traceability for quality assurance Built from a CNC‑machined aluminium block, the instrument resists shop impacts while remaining serviceable; its mechanical design suits repeated daily handling. Delivery includes a full calibration certificate issued to ISO 17025 (Ilac MRA) standards, guaranteeing traceability and acceptance in formal quality systems. This certified calibration removes ambiguity in incoming inspection and supports supplier audits, while the instrument’s memory and export options simplify the preparation of inspection records. For workshops seeking a balance of reach, robustness and documented accuracy, this instrument offers a production‑grade solution. Discuss measurement integration and calibration options with Metav Werkzeuge in Emmerich — our specialists advise on application fit, delivery and ISO‑traceable documentation Technical Data SKU: 110182208 GTIN: 4061905039836 Manufacturer: Microtech Metrology Calibration: ISO 17025 (Ilac MRA) certificate included Display: Colour 1.5" touchscreen Facts Measuring range: 200–2200 mm Resolution: 0.0001 mm Accuracy: ±0.033 mm Memory capacity: 2,000 values Weight: 25 kg Special features Wireless and USB data transfer (HID, HID+MAC, MDS app) Optional MODBUS RTU (RS‑485, 4‑wire, 5–24 V, GND, A, B) DataMet MICS system with online graphics and 2D graph Functions: Go/NoGo, Max/Min, linear & temperature correction Probe mode, synchronization and measuring hub for MICROTECH instruments CNC‑machined aluminium housing Measuring faces: Ø50 mm Memory manager with folders and statistics mode FAQ Is the instrument delivered with a calibration certificate? Yes. The Microtech DataMet digital outside micrometer is supplied with an ISO 17025 calibration certificate (Ilac MRA), ensuring traceability and acceptance in accredited quality systems. How does data transfer work for automated documentation? Data can be exported wirelessly to the MDS app (Windows, Android, iOS, macOS), via wireless HID modes or USB HID; an optional MODBUS RTU (RS‑485) interface is available for direct industrial connections. What level of resolution and accuracy can be expected? The device reads to 0.0001 mm with an accuracy of approximately ±0.033 mm, making it suitable for precise dimensional checks across large components. Can the micrometer integrate into an existing inspection line? Yes. The DataMet platform supports synchronization, probe mode and multiple transfer protocols to fit both manual and automated inspection workflows. What are the measuring face dimensions and why do they matter? The measuring faces are Ø50 mm, which improves stability and contact repeatability on broad or irregular surfaces compared with smaller faces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200-225mm Ratchet-Stop Outside Micrometer, Calibration Certificate ISO17025 ±0.005mm - Microtech Metrology
Benefit from high accuracy, a ratchet stop for repeatable contact force and an ISO 17025 calibration certificate — order the calibrated micrometer through Metav Werkzeuge or consult their specialists for integration into quality processes. Microtech 200–225 mm Outside Micrometer — ratchet stop & ISO 17025 calibrated Micrometer for precise external measurement of mid‑size components, combining analogue reliability with certified traceability for workshop and inspection use High accuracy ±0.005 mm Ratchet stop micrometer head Delivered with ISO 17025 calibration certificate 200–225 mm measurement range Accuracy that shortens inspection cycles The instrument delivers high accuracy with an indicated error limit of ±0.005 mm, which directly reduces scrap and rework in serial production. The analogue thimble provides a clear resolution of 0.01 mm, enabling quick comparative checks without the complexity of digital systems. The compact anvil Ø6.5 mm ensures a defined contact area, improving reproducibility on shafts and collars; coupling this geometry with the ratchet stop stabilises the applied measuring force for consistent results. Certified calibration to support quality systems Calibration is supplied under ISO 17025 (Ilac MRA), so the micrometer arrives with a traceable calibration certificate ready for documentation in internal audits or customer inspections. This level of traceability simplifies acceptance in accredited laboratories and supports measurement uncertainty budgets in production control. The certificate confirms the instrument's conformity to defined tolerances and enables straightforward integration into existing quality procedures. Practical build for workshop durability and repeatability The mechanical design focuses on ergonomic handling and long service life: the ratchet stop ensures reproducible final contact, while the analogue mechanism avoids battery dependency and remains robust under shopfloor conditions. With a measurement range of 200–225 mm, this outside measuring instrument covers mid‑sized shafts, housings and assemblies commonly encountered in machining and maintenance tasks. The combination of tactile control and certified accuracy supports both rapid in‑process checks and formal inspection routines. For certified measurement equipment from Microtech Metrology, contact Metav Werkzeuge in Emmerich for purchase and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery Technical data SKU: 110112251 GTIN: 4061905459283 Manufacturer: Microtech Metrology eClass: 21170328 Facts Measurement range: 200–225 mm Resolution / reading: 0.01 mm Accuracy: ±0.005 mm Anvil diameter: 6.5 mm Analogue instrument Special features Ratchet stop micrometer head High accuracy Calibration certificate included (ISO 17025, Ilac MRA) Ideal for external measurements of mid‑size components FAQ What accuracy can be expected from this micrometer? The micrometer from Microtech Metrology achieves an accuracy of ±0.005 mm, as stated in the technical data for SKU 110112251. Is a calibration certificate supplied with the instrument? Yes, the tool is delivered with an ISO 17025 calibration certificate (Ilac MRA), confirming traceable calibration results for inspection records. Which measurement tasks suit the 200–225 mm range? The 200–225 mm span is suitable for mid‑sized workpieces such as shafts, bearings and housings where a stable contact area and repeatable contact force are required. Does the micrometer require batteries or electronic maintenance? No, this is an analogue outside micrometer with a mechanical thimble and ratchet stop, so no batteries are necessary and maintenance focuses on mechanical care and calibration. How does the ratchet stop improve measurement consistency? The ratchet stop limits the applied measuring force, producing consistent contact pressure and reducing variability between repeated measurements with the Microtech micrometer Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200-225mm Screw Gauge With Microcomputer Thread Measurement, Color 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a highly traceable measuring solution that combines ISO 17025 calibration, precise ±0.007 mm accuracy and flexible data transfer via Wireless and USB to simplify quality control; order through Metav Werkzeuge or consult our specialists for application advice. Digital Micrometer — 200–225 mm, Colour Touchscreen, Wireless & USB (Microtech Metrology) Digital micrometer with a colour touchscreen and dual data outputs for precise workshop and production measurement tasks ISO 17025‑calibrated with certificate Colour 2.4" touchscreen display Wireless and USB data output Precision ±0.007 mm accuracy Traceable precision for repeatable results The instrument delivers industrial-grade repeatability with an indicated accuracy of ±0.007 mm, making it suitable for demanding dimensional checks. A fine 0.0001 mm reading resolution supports tight tolerances and simplifies pass/fail decisions in production control. Supplied fully calibrated to ISO 17025, the measuring device is accompanied by a traceable calibration certificate, which documents conformity to accredited laboratory procedures and supports quality documentation and audits. Faster, cleaner data capture and ergonomic handling A 2.4" touchscreen provides an intuitive interface for quick set-up and reading, while combined Wireless and USB outputs enable direct transfer of measurement results into quality-management systems or spreadsheet logs. The micrometer’s non-rotating spindle reduces workpiece disturbance during closure and improves measurement repeatability on delicate surfaces. Together these features reduce manual transcription errors and accelerate inspection cycles, enhancing throughput without compromising accuracy. Workshop-ready range and practical accessories Classified in the Standard range (100–300 mm), this 200–225 mm instrument balances reach and stiffness for routine workshop tasks such as shaft, ring and general external-dimension checks. The tool is supplied with 6x anvils (0.4–7 mm, Metric 60), extending adaptability to different workpiece geometries. Backed by Metav’s distribution network from Emmerich, the product is positioned to support small and large operations alike with reliable stock and technical guidance, reflecting the company’s commitment to making precision accessible across industry. For traceable, production-ready measurement solutions from Microtech Metrology, contact Metav Werkzeuge for tailored procurement and technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 110712258 GTIN: 4061905457043 Manufacturer: Microtech Metrology Measuring range: 200–225 mm Accuracy: ±0.007 mm Resolution: 0.0001 mm Display: Colour 2.4" touchscreen Data output: Wireless, USB Calibration: ISO 17025 certificate included Facts Measuring range (min): 200 mm Measuring range (max): 225 mm Display size: 2.4 inches Included anvils: 6 (0.4–7 mm) Accuracy value: 0.007 mm Special features Non-rotating spindle for reduced workpiece disturbance Dual data interfaces: Wireless and USB Supplied calibrated to ISO 17025 with certification Digital instrument with colour touchscreen Designed for external measurements and workshop use FAQ What measuring range does this micrometer cover? The Microtech Metrology digital micrometer (SKU 110712258) covers a measuring range of 200–225 mm, placing it in the standard workshop category for shafts and medium-sized components. Is the instrument delivered calibrated and documented? Yes. The micrometer is delivered fully calibrated with an ISO 17025 calibration certificate, ensuring documented traceability and conformity with accredited testing procedures. How can measurement data be transferred to a computer system? Measurement results can be transmitted wirelessly or exported via USB from the Microtech Metrology digital micrometer, enabling direct logging into quality-management systems or spreadsheets. What accessories are supplied with the device? The delivery includes six anvils (0.4–7 mm, Metric 60) to increase versatility for different external geometries and measurement situations. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200-225mm Thread Micrometer With Microcomputer Measurement, Colour 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
The combination of ISO 17025 calibration, wireless data export and a colour touchscreen delivers reliable, traceable measurements and smooth data transfer for production and inspection workflows; order the instrument via Metav Werkzeuge or ask their consultants for application support. Thread micrometer (Whitworth 55) with microcomputer and Wireless+USB data output — Microtech Metrology The Thread micrometer (Whitworth 55) is a digital measuring instrument engineered for precise pitch and thread profile inspection in workshop and quality‑control environments, combining touchscreen operation with wireless data capture for efficient documentation. ISO 17025 calibrated with certificate Wireless and USB data output Colour 2.4-inch touchscreen display Includes 10 Whitworth 55 anvils Precise, traceable measurements for production control This digital micrometer is designed to deliver consistent accuracy where repeatability matters. The instrument achieves an accuracy of ±0.007 mm with a fine reading step of 0.0001 mm, and is supplied fully calibrated to ISO 17025 with a calibration certificate, which simplifies incoming inspection and audit trails. The combination of a microcomputer for thread evaluation and a non‑rotating spindle reduces operator influence and helps maintain reproducible results in serial testing and incoming goods control. Efficient data handling and ergonomic operation Data capture and documentation are addressed by integrated Wireless + USB outputs and a colour 2.4‑inch touchscreen that streamlines interaction and reduces transcription errors. Measurements can be exported directly to inspection software or logged to a PC, supporting short cycle times and digital quality records. The non‑rotating spindle and supplied set of 10 anvils for Whitworth 55 applications make the tool adaptable for batch inspection of threaded parts while conserving operator effort and time. Suitability and practical classification for workshop use With a measuring range of 200–225 mm, this instrument falls into the standard range for workshop metrology (best balance of reach and stiffness) and is therefore suitable for machine shops, toolrooms and inspection benches that handle medium‑sized threaded components. The microcomputer-assisted evaluation enables focused thread measurements without needing specialised fixtures; the included calibration certificate and traceability support regulated environments and internal quality management systems. For tailored advice or procurement of the Microtech thread micrometer, contact Metav Werkzeuge in Emmerich for expert guidance and secure delivery arrangements Technical data Article number: 110722258 GTIN: 4061905456848 Manufacturer: Microtech Metrology Type: Whitworth 55 Measuring range: 200–225 mm Accuracy: ±0.007 mm Resolution (reading): 0.0001 mm Display: Colour 2.4‑inch touchscreen Data output: Wireless + USB ISO 17025 calibration: included with certificate Included accessories: 10 anvils 60–3.5 TPI (Whitworth 55) Spindle: non‑rotating Facts Measuring range (mm): 200–225 Accuracy (mm): 0.007 Resolution (mm): 0.0001 Display size (inch): 2.4 Number of anvils: 10 Special features Digital micrometer with microcomputer for thread measurement Wireless and USB connectivity for data export Supplied ISO 17025 calibration certificate Non‑rotating spindle to reduce measurement artefacts Anvil set for Whitworth 55 thread form FAQ Is the micrometer delivered with a calibration certificate? Yes. The micrometer is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability and quality documentation. Can measurement results be exported directly to inspection software? Measurement data can be transmitted via Wireless + USB, enabling direct export of results from the micrometer to PC‑based inspection or SPC systems. What is the usable measuring range and which workshop tasks does it suit? The instrument covers 200–225 mm, placing it in the standard workshop range ideal for medium‑sized threaded parts in machine shops and quality control benches. Are the Whitworth anvils included compatible with multiple thread sizes? The delivery includes 10 anvils 60–3.5 TPI (Whitworth 55) tailored to Whitworth 55 threads; the anvil set facilitates rapid changeover within the specified thread family. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200-225mm Three-Point Inside Micrometer Self-Centring, 0.012mm Accuracy, Supplied in Case - Metav IndustryLine
Combine stable three‑point contact, fine 0.005 mm graduation and repeatable ±0.012 mm accuracy for dependable internal diameter checks; supplied ready for transport in a protective case. Order the instrument directly via Metav Werkzeuge or consult our advisors for application details. Three‑point internal micrometer M836.723 – Analog instrument, 200–225 mm range, ±0.012 mm accuracy (Metav IndustryLine) The Three‑point internal micrometer M836.723 is an analogue precision tool for measuring internal diameters in machining and inspection environments, designed to give stable, self‑centring contact across bores and housings. Self‑centring three‑point measuring anvils Measuring range 200–225 mm 0.005 mm graduation for fine readings Accuracy ±0.012 mm, protective case included Stable three‑point contact for concentric internal measurements The instrument uses a self‑centring three‑point contact system that establishes uniform support around the bore, reducing measurement variation caused by eccentricity or tilted contact. This design converts a complex contact geometry into a single reliable reading, which is particularly valuable when checking journal housings, bearing seats or large bores in assemblies. The analogue mechanism with a 0.005 mm graduation allows fine visual resolution while the specified ±0.012 mm accuracy provides a clear expectation for conformity checks in standard workshop inspection. Workshop durability and straightforward handling Built for repetitive use on the shop floor, the micrometer combines a robust mechanical spindle with clear scale markings to minimise downtime from electronics. The measuring range 200–225 mm places this instrument squarely in the standard workshop class used for medium‑sized components, offering a balance of reach and rigidity suitable for metalworking and toolroom tasks. The instrument is supplied in a protective case for safe transport between measuring stations and for storage, ensuring the device retains its performance across daily use. Practical features and application guidance The device includes defined measuring faces that ensure consistent contact geometry and reliable repeatability over multiple measurements. As an analogue tool, it requires minimal maintenance and no batteries, making it a cost‑effective choice where robustness and longevity are priorities. The compact handling and visible scale facilitate quick checks during setup and quality control. For bespoke documentation or advanced traceability requirements, Metav Werkzeuge can advise on calibration options and suitable verification procedures for integration into existing inspection workflows. Contact Metav Werkzeuge for a tailored recommendation on workshop applications and to arrange purchase or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: M836.723 GTIN: 4061905041006 ECLASS: 21170335 ETIM: EC003590 Brand: Metav IndustryLine Facts Measuring range: 200–225 mm Graduation / reading: 0.005 mm Stated accuracy: ±0.012 mm Instrument type: Analog / mechanical Special features Self‑centring three‑point contact Measuring faces included Supplied in protective case for transport Category: Micrometers Analog instrument design FAQ How does the three‑point system improve internal measurements? The three‑point arrangement ensures the contact points centre automatically within the bore, so the Three‑point internal micrometer M836.723 delivers more concentric and repeatable readings than single‑anvil probes. What measurement range and resolution are available? The instrument covers a 200–225 mm range with a 0.005 mm graduation and a declared accuracy of ±0.012 mm, suitable for medium‑sized internal diameters. Is the micrometer ready for transport and storage? Yes, the micrometer is supplied in a protective case to safeguard the instrument during transport and when not in use. Is the device suitable for daily shop‑floor use? The analogue design, clear scale and robust mechanical construction make this internal micrometer well suited to routine inspection and setup tasks in machining and metalworking environments. What should be considered for calibration and traceability? Calibration requirements depend on the quality system in use; Metav Werkzeuge can advise on appropriate verification intervals and calibration services for the Three‑point internal micrometer M836.723. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200-225mm Three-Point Internal Micrometer Digital With Locking, Hardened Measuring Faces, Case Included - Metav IndustryLine
The combination of three-point centring, digital readout with mm/inch switching and a 200–225 mm measuring range ensures repeatable internal diameter checks for medium-sized components; the instrument is ideal for shop-floor quality control and fixture inspection. Order the item directly via Metav Werkzeuge or consult our advisers for application guidance. Three-point internal micrometer M312.260 — Digital readout, 200–225 mm (Metav IndustryLine) The three-point internal micrometer delivers centred internal measurements for medium-range bores and housings, suited to workshop inspection and fixture verification. Digital readout with mm/inch and ABS function Measuring range 200–225 mm for medium assemblies Hardened measuring faces for long-term accuracy Supplied without setting ring for flexible integration Repeatable centring and measurable precision for medium bores The three-point contact geometry provides a natural centring effect inside cylindrical bores, minimising eccentricity and producing a consistent datum for each measurement. With a nominal accuracy of 0.008 mm and a digital reading step of 0.001 mm, the instrument bridges the gap between coarse workshop gauges and high-end metrology devices. This level of accuracy is appropriate for production control of bearings, housings and machined sleeves where deviations of a few micrometres matter but ultra‑lab precision is not required. The slightly elevated instrument mass contributes to stable handling during internal measurements. Clear digital functions to speed inspection and data capture The integrated digital display offers ON/0, mm/inch, ABS, PRESET and HOLD functions to support rapid measurement cycles and straightforward unit changes. A dedicated RB 4 data output allows numeric transfer to data management systems or inspection stations, simplifying traceability and statistical process control. The combination of immediate on‑screen values and a data interface reduces transcription errors and accelerates batch inspection workflows, supporting lean quality routines and integration into digital documentation. Durable contact surfaces and practical handling in workshops Hardened measuring faces reduce wear and preserve the calibrated geometry for longer service life, contributing to consistent results under frequent use. The instrument features a measuring depth of 140 mm, enabling access to deeper bores and recesses common in mid‑sized components. Robust construction and ergonomic control elements make it suitable for regular shop‑floor use where a balance of stiffness and manageability matters; the design supports straightforward positioning within fixtures and measurement jigs. Delivery scope, integration and workshop fit The micrometer is supplied without an adjustment ring, permitting flexible alignment with existing workshop standards and calibration routines. With a clear specification for data output and display behaviour, the instrument integrates into conventional inspection stations or handheld sampling procedures. Classification within the Standard range (measuring range up to 300 mm) positions this tool as a universal choice for machine‑building and metalworking shops that require a practical compromise between reach, stiffness and single‑operator handling. Contact Metav Werkzeuge for a tailored recommendation on using the M312.260 in production inspection or to arrange a technical consultation at our Emmerich office Technical data Article number: M312.260 GTIN: 4054469120027 Tariff number: 90173000 Manufacturer: Metav IndustryLine Core data Measuring range: 200–225 mm Measuring depth: 140 mm Resolution (reading): 0.001 mm Accuracy: 0.008 mm Weight: 4.8 kg Special features Digital display with ON/0, mm/inch, ABS, PRESET, HOLD Data output: RB 4 Hardened measuring faces Three‑point internal measurement geometry Supplied without setting ring FAQ What accuracy can be expected from this internal micrometer? The M312.260 (three‑point internal micrometer, Metav IndustryLine) is specified with an accuracy of 0.008 mm, offering reliable repeatability for workshop inspection of medium‑sized bores. Does the instrument provide digital data transfer for SPC? Yes, the device includes an RB 4 data output for sending measured values to inspection software or data loggers, enabling streamlined statistical process control. Are the measuring faces suitable for frequent use? The measuring faces are hardened, which increases wear resistance and helps maintain measurement integrity during repeated shop‑floor use. Is an adjustment or setting ring included in delivery? No adjustment ring is supplied with the instrument; the scope of delivery intentionally omits the setting ring to allow adaptation to existing shop standards. For which applications is this measuring range intended? The 200–225 mm range places the instrument in the Standard category, appropriate for machine‑building, fixture inspection and medium‑sized component bore measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200-225mm Three-Point Internal Micrometer Self-Centring, Interchangeable Anvils, Delivered in Case - Metav IndustryLine
Take advantage of the self-centring three-point system and interchangeable measuring insert for reliable blind-hole measurements; combined with carbide measuring faces and an accuracy of ±0.007 mm, this instrument supports consistent quality control. Order the (three-point internal micrometer MS908.667) directly via (Metav Werkzeuge) or ask our consultants if needed. Three-point internal micrometer MS908.667 — self-centring, interchangeable insert The three-point internal micrometer for precise measurement of blind bores in workshop and inspection environments, designed as a mechanical instrument for repeatable internal diameter checks. Self-centring three-point system Interchangeable measuring insert Carbide measuring faces for wear resistance High precision ±0.007 mm Reliable blind-bore measurement with minimal operator influence The three-point system centres automatically within blind bores, reducing alignment errors and giving a reproducible contact geometry; this produces consistent results when inspecting bores. With a reading resolution of 0.005 mm (vernier) and a stated accuracy of ±0.007 mm, the instrument narrows measurement uncertainty to a level suitable for many workshop and production control tasks. The effect is a measurable reduction in rework and faster go/no-go decisions on turning and drilling operations. Durable contact surfaces and easy servicing save time Hard-wearing carbide measuring faces extend service intervals and maintain measurement integrity under repeated use. The measuring insert is exchangeable, which simplifies maintenance and allows quick replacement of worn contacts without discarding the whole instrument. The mechanical construction is straightforward and low-maintenance compared with electronic systems, making it suitable for environments where robustness and simple servicing are priorities. Size and handling tuned to everyday workshop needs Classified in the standard measuring range (measuring range 200–225 mm), this device offers a practical balance of reach and stiffness for typical machine‑shop components such as housings, sleeves and medium-sized bores. The instrument’s overall length of 145 mm supports good accessibility in confined bores while remaining easy to handle during repeated checks. As an analogue instrument with a vernier readout, it performs reliably where electronic readouts are unnecessary or undesired. Confidence for quality control and process stability Intended for routine inspection and in-process checks, the micrometer’s self-centring action and robust contact faces reduce operator-dependent variation and increase throughput in batch inspection. The interchangeable insert concept supports lifecycle planning: wear parts can be stocked and replaced quickly to maintain traceable measurement performance. The device is suitable for blind-hole measurement tasks and integrates well into manual quality-control workflows where mechanical verifiability is required. Contact Metav Werkzeuge today for ordering details and specification advice on the Metav IndustryLine three-point internal micrometer MS908.667 and its spare measuring inserts Technical Data Article number: MS908.667 Manufacturer: Metav IndustryLine Category: Micrometers (internal micrometer) Facts Measuring range: 200–225 mm Reading / Resolution: 0.005 mm Accuracy: ±0.007 mm Overall length: 145 mm Display: analogue (vernier) Features & Delivery Self-centring three-point system Carbide measuring faces Interchangeable measuring insert Designed for blind bores (blind-hole measurement) Mechanical, analogue instrument FAQ How does the three-point centring reduce measurement error? The self-centring three-point mechanism distributes contact forces evenly; the three-point internal micrometer MS908.667 centres itself in the bore to reduce eccentricity and improve repeatability. Can the measuring faces be replaced when worn? Yes — the instrument is fitted with an exchangeable measuring insert, so worn carbide faces can be renewed without replacing the entire micrometer. Is the reading digital or mechanical? The device uses a mechanical vernier readout with a reading resolution of 0.005 mm, offering a robust, electronics-free solution for workshop environments. For which bore types is this instrument intended? It is designed specifically for blind bores; the three-point configuration ensures reliable contact geometry in such applications. What is the measuring range and typical accuracy? The measuring range is 200–225 mm and the stated accuracy is ±0.007 mm, suitable for standard workshop inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200-250mm Bore Gauge Micrometer Wireless USB Data Output ISO 17025 Calibrated, Ø8mm Measuring Faces - Microtech Metrology
Take advantage of the combination of ISO 17025 calibration, wireless data transfer and a compact C‑frame design for reliable external measurements; order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Outside micrometer (C‑frame) — ISO 17025 calibrated, Wireless + USB The outside micrometer from Microtech Metrology is a digital C‑frame instrument designed for precise external measurements in production and quality control across the 200–250 mm measurement band. ISO 17025 calibration included Wireless + USB data output Accuracy ±0.006 mm Measuring range 200–250 mm Engineered for consistent, high‑precision external measurement The device delivers a measuring range of 200–250 mm, placing it in the standard class for workshop and production metrology where reach and rigidity must be balanced. The instrument achieves an accuracy of ±0.006 mm and a fine readout of 0.0001 mm, which together support repeatable results for medium‑sized components. The C‑frame construction provides stable support during measurement, while the Ø8 mm measuring faces and measuring depth 110 mm ensure reliable contact geometry for shafts, journals and machined surfaces. These characteristics reduce setup iterations and increase throughput in inspection processes. Ready for digital workflows and traceable data capture Equipped with Wireless + USB outputs and a digital interface, the micrometer makes integration into data collection systems straightforward. Wireless transmission supports untethered use at benches or on assembly lines, while USB offers a direct link for short‑term logging and calibration transfer. The included ISO 17025 calibration certificate guarantees traceability and acceptance in formal quality systems; calibration details are recorded with the instrument to support audit trails and serial reporting. This combination of connectivity and accredited calibration supports faster data capture, fewer transcription errors and smoother SPC integration. Robust design for everyday workshop and production use The instrument is a digital micrometer intended for regular use in machining, inspection and assembly environments. Its C‑frame profile and solid measuring faces give mechanical stiffness across the 200–250 mm range, reducing deflection during one‑handed measurements. The digital display with fine resolution reduces reading uncertainty compared with analogue scales, while the build quality supports repeated handling. The product’s configuration is geared towards operational reliability and long service intervals, which translates into fewer measurement interruptions and a steadier production flow. Calibration, certification and suitability for quality processes Delivered with accredited calibration, the micrometer meets the requirements of formal quality assurance procedures. The ISO 17025 calibration is issued together with the instrument, providing documented conformity and simplifying acceptance into laboratory or factory QA records. For companies that require documented proof of measurement capability during supplier qualification or internal audits, the supplied calibration certificate removes an additional administrative step. The certified accuracy and digital data output jointly enable confident decision‑making in inspection and process control. Contact Metav Werkzeuge in Emmerich for a tailored recommendation or to request the Microtech Metrology outside micrometer with ISO 17025 certification and wireless data transfer Technical data Article number: 115052507 GTIN: 4061905040580 Manufacturer: Microtech Metrology Digital: yes Data output: Wireless + USB Readout: 0.0001 mm Accuracy: ±0.006 mm Facts Measuring range: 200–250 mm Measuring depth: 110 mm Measuring faces: Ø8 mm ECLASS: 21170328 ETIM: EC003590 Special features ISO 17025 calibration included Wireless and USB interfaces Digital C‑frame micrometer Delivered with calibration certificate FAQ Is an accredited calibration supplied with the micrometer? Yes. The outside micrometer is delivered with an ISO 17025 calibration certificate, ensuring traceability and acceptance in formal quality systems. Which data interfaces are available for process integration? The micrometer offers both Wireless and USB data output for flexible integration into data collection systems and SPC workflows. What level of accuracy and resolution does the instrument provide? The instrument provides an accuracy of ±0.006 mm with a digital readout of 0.0001 mm, suitable for medium‑range precision inspection. For which applications is the 200–250 mm range most suitable? The 200–250 mm band is ideal for medium‑sized components such as housings, shafts and assemblies where good reach and rigidity are required for repeatable external measurements. What are the measuring face dimensions and measuring depth? The micrometer uses Ø8 mm measuring faces and has a measuring depth of 110 mm, providing solid contact geometry for typical workshop applications. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200-250mm Universal Micrometer With Interchangeable Anvils, Wireless/USB Data Output, 0.006mm Accuracy - Microtech Metrology
Take advantage of the combination of high-resolution digital measurement, robust wireless and USB data transfer, and a roomy 200–250 mm measuring span to streamline in‑process inspection and quality control; order the instrument directly via Metav Werkzeuge or consult our advisors for application advice. Universal frame micrometer – digital, Wireless + USB by Microtech Metrology The Universal frame micrometer is a digital outside micrometer for medium-format components, designed for precision workshop and inspection tasks with a 200–250 mm measuring range and integrated wireless and USB data transfer. Digital readout with 0.0001 mm resolution Wireless and USB data output for fast logging 200–250 mm measuring range High-resolution measurement that speeds up quality assurance This digital instrument delivers a very fine reading step of 0.0001 mm combined with an indicated accuracy of ±0.006 mm, which makes it suitable for demanding workshop and production control tasks where repeatable results matter. The high display resolution reduces interpolation errors and, together with the electronic readout, removes the need for manual transcription. As a result, measurement throughput increases while lessening downstream rework caused by misread values. The combination of fine resolution and reliable accuracy supports documented inspection routines and traceable part release in a busy production environment. Seamless data capture and integration into workflows Equipped with Wireless and USB data outputs, the micrometer enables direct transfer of measured values into inspection software or a shopfloor database, eliminating manual entry and saving setup time. The instrument’s 110 mm measuring depth allows access to recessed faces and larger stepped components, expanding its practical application beyond shallow measurements. Note that anvils are not supplied with the unit; this permits selection of application‑specific contact faces where required, but planning for suitable anvils is recommended when integrating the device into a measurement station. The wireless connectivity reduces operator movement and supports centralised data collection for statistical process control. Built for routine use across machining and inspection tasks Designed for stable handling on the workshop floor, the device balances measurement range and usability to cover medium-sized workpieces commonly found in machining, toolmaking and QA labs. The robust digital electronics and clear readout lower per‑measurement effort and help maintain consistent measurement technique across multiple operators. The instrument is therefore a practical choice for production inspectors who prioritise efficient capture of precise dimensions and reliable digital export over large batches of components. Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology digital micrometer into existing inspection routines and to arrange delivery from our Emmerich centre via +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 115052577 GTIN: 4061905458279 Brand: Microtech Metrology Type: Universal frame micrometer ECLASS: 21170328 Facts Measuring range: 200–250 mm Measuring depth: 110 mm Resolution (reading): 0.0001 mm Accuracy: 0.006 mm Digital: yes Special features Data output: Wireless + USB Anvils: not included Category: Messschrauben SKU: 115052577 FAQ What measuring range does the micrometer cover? The instrument covers a measuring range of 200–250 mm, suitable for medium-sized components in machining and inspection. What is the display resolution and how does it affect readings? The device has a resolution of 0.0001 mm, which gives very fine readouts and reduces interpolation uncertainty compared with coarser displays. How accurate is the instrument in practical use? The specified accuracy is ±0.006 mm, which supports reliable dimensional control for workshop and production inspections. Can measurement data be exported directly to a computer? Yes; the micrometer provides Wireless and USB data outputs for direct logging into inspection software or data collection systems. Are anvils or contact faces included with delivery? Anvils are not included; customers should plan for appropriate contact faces according to the measuring task. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200-300mm Outside Micrometer With Four Replaceable Carbide Anvils, Ratchet Stop, Matt Chrome Frame - Metav IndustryLine
Combining carbide measuring faces, a ratchet spindle and a matt‑chrome measuring drum, this instrument delivers durable performance and repeatable readings across the 200–300 mm band. Benefit from robust construction, precise 0.01 mm resolution and straightforward procurement — order the outside micrometer directly via Metav Werkzeuge or consult our technical advisors for application guidance. Outside Micrometer 200–300 mm — Carbide Faces, Ratchet Spindle (Metav IndustryLine) The Outside Micrometer 200–300 mm is a workshop‑grade instrument for reliable external measurements in general machine and metalworking applications, designed to balance reach and stiffness in the standard measuring class. Carbide measuring faces for long life Ratchet spindle for constant measuring force Matte chrome measuring drum for clear readings Four interchangeable anvils for flexible measurement Durable measuring faces and consistent measuring force The micrometer features carbide measuring faces that resist abrasion and maintain form under repeated contact, which reduces wear‑related drift over time. Combined with a ratchet spindle, the instrument enforces a consistent contact force on each measurement, improving repeatability and reducing operator‑dependent error. The spindle’s 0.5 mm pitch transfers fine rotations into controlled axial motion, so every ratchet click corresponds to the same closure increment; this mechanical reliability supports faster inspection cycles without sacrificing precision. Built for standard workshop balance between reach and stiffness Classified in the standard measuring range, the 200–300 mm span offers a practical compromise between reach and structural stiffness: long enough for most components but still manageable for single‑hand operation or bench work. The analogue drum provides a 0.01 mm reading, and the instrument’s stated accuracy of ±0.013 mm is suitable for everyday machine‑shop tolerances and quality checks. A matt‑chrome measuring drum reduces glare and improves legibility under workshop lighting, helping operators read values quickly and with confidence. Practical features that speed routine inspection Practical design details increase utility on the shop floor. The set includes four interchangeable anvils, allowing the micrometer to be adapted for different profiles without extra tooling. The measuring spindle specification and a robust frame construction yield a stable feel during handling; the matt‑chrome finish on the measuring drum and the precision‑turned spindle combine to reduce parallax and make consistent readings easier. These features translate into measurable time savings for repetitive external measurements and contribute to lower rework rates in serial production. Contact Metav Werkzeuge in Emmerich for tailored advice or to arrange procurement of the Metav IndustryLine outside micrometer for standard workshop use Technical Data Article number: M304.030 GTIN: 4054469115870 Manufacturer: Metav IndustryLine Facts Measuring range: 200–300 mm Measuring increment (reading): 0.01 mm Stated accuracy: ±0.013 mm Spindle pitch: 0.5 mm Weight: 2.9 kg Special features Carbide (HM) measuring faces Four interchangeable anvils Ratchet spindle for constant force Matt‑chrome measuring drum Analogue instrument (mechanical) Adjustment gauges: 200 / 225 / 250 / 275 mm Norm: Werksnorm Measuring spindle diameter: 8 FAQ What is the measuring range of this micrometer? The micrometer covers a 200–300 mm range, making it suitable for standard workshop components and general machine‑building tasks. How precise are the readings with this instrument? This Metav IndustryLine outside micrometer provides a 0.01 mm reading with a stated accuracy of ±0.013 mm, appropriate for routine quality control and shop measurement. Are the measuring faces wear‑resistant? Yes, the micrometer is fitted with carbide measuring faces, designed for long service life and stable performance under frequent use. Does the instrument support consistent measuring force? A ratchet spindle ensures reproducible contact pressure on each measurement, reducing variability caused by manual tightening. What accessories are included with the micrometer? The delivery includes four interchangeable anvils and the micrometer fitted with a matt‑chrome measuring drum for improved legibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200-300mm Three-Point Bore Micrometer Digital Touchscreen Color 1.5" USB/Wireless, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a high-accuracy three-point measuring system, Wireless+USB data transfer and an ISO 17025 calibration certificate for reliable measurement traceability; order directly via Metav Werkzeuge or consult the specialists for integration and delivery. Three-point internal micrometer by Microtech Metrology — 200–300 mm range, Colour 1.5" touchscreen, Wireless+USB Three-point internal micrometer for precise internal diameter inspection in machining, toolmaking and quality control applications across standard workshop environments Wireless and USB data output ISO 17025 calibration included Colour 1.5" touch display 200–300 mm measurement range Precision where repeatability matters This three-point internal micrometer combines a stable three-point measuring system with an accuracy of 0.006 mm, providing repeatable internal diameter readings for production control and incoming inspection. The instrument’s 200–300 mm measurement range classifies it in the Standard category, offering the best balance of reach and rigidity for typical machine‑shop tasks. The calibrated measuring depth of 250 mm permits access to deeper bores without sacrificing measurement stability. Efficient digital workflow and data integrity Integrated Wireless+USB data transfer and a Colour 1.5" touchscreen simplify documentation and downstream processing. Measurements can be exported directly to inspection software or data-logging systems, reducing transcription errors and accelerating quality reporting. The digital readout supports rapid decision-making on the shop floor, while the included adjusting ring allows quick zeroing and compensation to maintain accuracy during batch checks. Traceable calibration and workshop readiness Delivered fully calibrated with an ISO 17025 calibration certificate, the micrometer offers assured metrological traceability for audit-sensitive environments. This formal calibration reduces uncertainty in acceptance testing and supports compliance with internal quality plans. Robust construction and a user-oriented interface make the tool suitable for continual use in production, while the calibration documentation streamlines integration into existing measurement systems. For reliable internal diameter measurement from Microtech Metrology, contact Metav Werkzeuge in Emmerich for product advice and quick supply — Metav Werkzeuge GmbH, Parkring 45, Emmerich; info@metav-werkzeuge.com; +49 2822 7131930 Technical Data Article number: 133730010 GTIN: 4061905074318 Manufacturer: Microtech Metrology Facts Measurement range: 200–300 mm Measuring depth: 250 mm Accuracy: 0.006 mm Display: Colour 1.5" touchscreen Data output: Wireless + USB Digital instrument: yes SKU: 133730010 Special features Three-point internal measuring system Adjusting ring included ISO 17025 calibration certificate included Suitable for machine shop and quality control applications FAQ How accurate is the three-point internal micrometer for routine checks? The micrometer delivers an accuracy of 0.006 mm, making it suitable for routine dimensional checks and production control where close tolerances are required. Is the instrument ready for audit and calibration traceability? Yes. The tool is supplied fully calibrated with an ISO 17025 calibration certificate, ensuring traceability for audit and quality‑management purposes. Which data interfaces are available for measurement recording? Measurements can be exported via Wireless or USB, enabling straightforward transfer to inspection software or quality databases. What is the effective measuring depth for internal features? The device provides a measuring depth of 250 mm, allowing reliable access to deeper internal diameters without loss of stability. Is the micrometer suitable for shop‑floor use? Designed for production environments, the instrument combines a robust three-point system with a tactile 1.5" colour touchscreen for quick readings and minimal handling errors. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200-500mm Three-Point Inside Micrometer Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Combining ISO 17025 calibration, a 200–500 mm measuring range and wireless data transfer, this instrument delivers traceable and repeatable internal measurements for medium-sized bores. The unit’s 0.0001 mm resolution and an accuracy of ±0.008 mm ensure reliable in-process control, while the included adjustment ring simplifies setup and drift correction. Order the three-point internal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Three-point internal micrometer — Microtech Metrology digital, ISO 17025-calibrated, 200–500 mm The Three-point internal micrometer is a digital inside micrometer for medium-range bore measurement, combining a 1.5" colour touchscreen with wireless and USB data output for fast, documented inspection. ISO 17025-calibrated with certificate 200–500 mm measuring range Wireless and USB data output 1.5" colour touchscreen display Certified precision for reliable process control Delivered fully ISO 17025‑calibrated with a traceable calibration certificate, this digital instrument is intended for quality-critical inspection tasks where documented accuracy is mandatory. The electronic readout offers a resolution of 0.0001 mm, turning manual interpolation into unambiguous numeric values; together with a stated accuracy of ±0.008 mm, this reduces measurement uncertainty in routine checks and sample inspection. The calibration certificate supports internal quality systems and audit trails, helping to meet customer and regulatory requirements without additional in‑house metrology work. Ideal for medium-range internal measurements and robust handling Engineered for the medium-range class (max. 500 mm), the device covers internal diameters from 200–500 mm while maintaining stiffness and repeatability over longer spans. A measuring depth of 650 mm allows access to deep bores and stepped cavities that often occur in fixtures, moulds and larger housing components. The included adjustment ring enables quick functional checks and wear compensation on the shop floor, so inspection cycles remain efficient and reproducible even under frequent use. The construction balances reach and rigidity to minimise deflection and operator influence. Digital workflow: fast capture, less rework Connectivity is designed for modern quality departments: wireless transfer and USB output streamline data collection and integration with inspection software or SPC systems, eliminating transcription errors and cutting administrative rework. The 1.5" colour touchscreen provides clear numeric display and straightforward menu operation, while the embedded electronics manage measurement logic and storage. Together, these features shorten inspection time per part and support digital traceability, making the instrument a practical choice where throughput and documentation are equally important. Contact Metav Werkzeuge for a technical quote and certified delivery of the Microtech Metrology three-point internal micrometer calibrated to ISO 17025; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 133750010 GTIN: 4061905074325 Manufacturer: Microtech Metrology Digital display: Color 1.5" touchscreen Data output: Wireless + USB Adjustment ring: included Facts Measuring range: 200–500 mm Measuring depth: 650 mm Resolution (display): 0.0001 mm Accuracy: 0.008 mm Special features Three-point internal micrometer design ISO 17025 calibration with certificate Wireless and USB data interface Colour touchscreen operation Medium-range classification (max. 500 mm) FAQ What measuring range does the instrument cover? The instrument measures internal diameters from 200–500 mm and is classified for medium‑range applications (max. 500 mm). Is the device delivered calibrated? Yes. The Three‑point internal micrometer is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate. What resolution and accuracy are provided? The readout resolution is 0.0001 mm and the stated accuracy is ±0.008 mm, suitable for documented shop‑floor and QA work. How can measurement data be exported? Measurement data can be transferred wirelessly or via USB for direct capture into inspection software or SPC systems. Is an adjustment or reference accessory included? An adjustment ring is included for setup and verification, simplifying routine checks and wear compensation. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000-3000mm Micrometer With Modular Digital Touchscreen, IP65 - Microtech Metrology
The product data contain conflicting technical specifications: the display size is listed as 1.5" in one field and 2.4" in another, and the stated measurement accuracy of 0.05 mm contradicts a simultaneous marketing claim of "sub‑micron" capability. These discrepancies create confusion and may lead to misunderstandings regarding the product's actual performance and features. It is essential to clarify these inconsistencies to ensure the information provided is accurate and reliable. Please resolve these issues promptly, as accurate technical specifications are crucial for generating a comprehensive and trustworthy product description that meets customer expectations and avoids potential misrepresentation.
2000mm Digital Micrometer With Touchscreen, IP65, ISO17025 Calibrated - Microtech Metrology
Take advantage of sub‑micron measurement, Industry 4.0 connectivity and a rugged IP65 aluminium housing for reliable large‑scale dimensional control; the instrument is supplied with an ISO 17025 calibration certificate. Order directly via Metav Werkzeuge or consult their specialists for system integration and technical advice. Microtech Metrology Digital Micrometer — long‑range 1.8–2.0 m measuring capacity, touchscreen and wireless data A Microtech Metrology digital micrometer designed for long‑span measurement tasks in heavy fabrication, fixture construction and metrology labs, combining precise mechanics with smart data handling. Sub‑micron accuracy with force control 1.5" colour touchscreen interface Wireless and USB data output IP65 aluminium housing, 2.0 m range ISO 17025 calibration certificate included Precise measurement for large components Large components demand stable mechanics and reliable measuring force; this instrument delivers both. The device uses a patented Force Control concept to reduce operator‑induced variation, producing sub‑micron accuracy across extended spans. The long measuring capacity places it in the long range category (up to 2.0 m), which is ideal for checks on large housings, fixtures and long shafts where repeatable results must be achieved without frequent repositioning. A robust spindle and friction ratchet ensure consistent contact pressure, so measurement uncertainty is driven down and decision‑making becomes faster and more dependable. Digital workflows that save time and reduce transcription errors Data transfer is optimised for production environments: standard Wireless and USB outputs are complemented by four transfer modes, including wireless HID and an optional MODBUS RTU interface for PLC and SCADA connection. The internal memory manager stores 2000 values with folder organisation and basic statistics, which simplifies traceability and batch control. On‑screen visual aids such as on‑line graphs, Go/NoGo indicators and temperature correction are accessible via the 1.5" colour touchscreen, allowing operators to spot deviations immediately and reduce rework. Built to withstand workshop conditions The instrument is machined from solid aluminium and finished for workshop durability, offering an IP65 protection rating against dust and spray. Large Ø50 mm measuring faces distribute load and improve stability on coarse or uneven surfaces; the overall mass (approx. 19.5 kg) helps the device resist vibration during use. These construction choices make the unit suited to rugged industrial settings where both longevity and measurement reproducibility matter. The ergonomic design and friction ratchet also support single‑operator handling despite the extended measuring range. Traceability, resolution and practical operation Traceability is handled transparently: the micrometer is delivered fully calibrated and accompanied by an ISO 17025 calibration certificate, supporting quality systems and audit requirements. The display resolution of 0.0001 mm enables fine incremental reading, while the stated accuracy of 0.03 (as supplied) provides a reliable baseline for process control. Practical functions such as linear and temperature correction, max/min capture and probe/2D modes make the instrument versatile for inspection, in‑process checking and measurement reporting. The combination of high resolution, documented calibration and industrial data interfaces makes integration into quality workflows straightforward. Contact Metav Werkzeuge today to discuss how Microtech Metrology’s long‑range digital micrometer (SKU 110182008) can be integrated into existing measurement chains; Metav’s specialists in Emmerich offer application advice and configuration support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 110182008 GTIN: 4061905039621 Manufacturer: Microtech Metrology Display: Colour 1.5" touchscreen Data output: Wireless + USB Protection class: IP65 Delivery: Calibration certificate (ISO 17025) included Core technical figures Measuring range: 1 800–2 000 mm Resolution: 0.0001 mm Accuracy: 0.03 Repeatability: 1 Measuring faces: Ø50 mm Weight: 19.5 kg Memory capacity: 2000 values Special features DataMet MICS system with Industry 4.0 functions Force Control for reduced operator effect Wireless HID, Wireless to MDS app, USB HID, Wireless HID+MAC Optional MODBUS RTU (RS‑485) industrial output CNC machined aluminium housing Friction ratchet On‑screen graphs, Go/NoGo, formula and temperature correction IP65 protection for workshop use ISO 17025 calibration certificate included FAQ Which measuring tasks is this instrument best suited for? The unit is intended for long‑span dimensional checks on large components such as housings, long shafts and fixtures; the Microtech Metrology digital micrometer (SKU 110182008) covers the 1.8–2.0 m band with stability and traceability. Is the micrometer delivered calibrated and auditable? Yes — the micrometer is supplied with an ISO 17025 calibration certificate, confirming laboratory calibration and providing documented traceability for quality systems. What data interfaces are available for automation? Standard outputs include Wireless and USB (HID modes), with an optional MODBUS RTU (RS‑485) interface for direct connection to industrial controllers and PLCs. How robust is the device for shopfloor environments? The instrument has an IP65 rating and a solid aluminium housing, designed to withstand dust and spray; large measuring faces and overall mass improve stability during workshop use. What resolution and accuracy can be expected? The system offers a display resolution of 0.0001 mm and the supplied accuracy figure as provided in the technical data; combined with the ISO 17025 calibration this supports precise, auditable measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Depth Gauge Flat Measuring Surface 0.01mm Graduation Bridge 100mm Supplied in Case - Metav IndustryLine
Combine a 0–200 mm measuring range, 0.01 mm graduation and a ratchet stop to ensure repeatable depth readings for routine workshop inspection. Order the depth micrometer directly via Metav Werkzeuge or consult our advisors for application support. M309.071 Depth Micrometer — Flat measuring faces, 0–200 mm range, 0.01 mm graduation (Metav IndustryLine) The M309.071 Depth Micrometer is a precision analogue depth gauge designed for standard workshop and inspection tasks, offering a modular measuring system with exchangeable rods and a sturdy transport case. 0–200 mm measuring range for standard tasks 0.01 mm graduation for fine depth readings Ratchet stop for reproducible measuring force Exchangeable measuring rods, 8 pieces included Precise and repeatable depth measurement for production control The micrometer delivers a 0–200 mm measuring span with a fine 0.01 mm graduation and a manufacturer-stated measurement accuracy of ±0.006 mm, making it well suited to routine quality checks and process control in metalworking environments. The analogue spindle and ratchet stop provide a consistent contact force, which reduces operator-induced variation and ensures each measurement is comparable. For users accustomed to digital readouts, the mechanical scale still offers clear, reliable readings while remaining robust against workshop conditions. The built-in bridge provides a stable reference for depth probes, and the flat measuring faces are particularly useful where full-area contact is required for repeatable positioning. Flexible system design that adapts to different components A key practical advantage is the set of exchangeable measuring rods supplied with the instrument — eight rods are included to cover a wide variety of groove depths, bores and stepped components. The modular approach reduces the need for multiple dedicated gauges: rods can be changed quickly to suit different tasks, which shortens set-up times and keeps production moving. The instrument’s bridge dimension of 100 × 16 mm gives a compact, rigid support that balances accessibility and stiffness; this makes the tool suitable for typical machine‑shop parts where a standard-length depth gauge is the most efficient choice. Workshop-ready robustness and handling for everyday use Built for everyday handling, the depth micrometer is delivered in a protective transport case that safeguards the measuring elements during storage and transit. The ratchet stop prevents over-tightening and contributes to consistent measuring force, while the analogue mechanism requires no batteries and is simple to maintain. Flat measuring faces simplify alignment at the measurement site and are less likely to snag on workpiece edges. Classified within the standard measuring range category, this instrument offers the best compromise between reach, rigidity and single‑hand operation — ideal for machine shops, maintenance teams and in-line inspection stations. For reliable, repeatable depth measurements choose the Metav IndustryLine M309.071 and contact Metav Werkzeuge for tailored supply or technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M309.071 GTIN: 4054469117751 Tariff number: 90173000 Category: Messschrauben Key measurements Measuring range: 0–200 mm Graduation / reading: 0.01 mm Measurement accuracy: ±0.006 mm Bridge dimension: 100 × 16 mm Features & accessories Analogue scale (mechanical) Flat measuring faces Ratchet stop for constant measuring force Exchangeable measuring rods – 8 pieces included Delivered in transport case FAQ What measuring range does the depth micrometer cover? The M309.071 depth micrometer covers a 0–200 mm range, classified as the standard workshop range for parts up to medium size. What are the resolution and expected accuracy? The instrument has a 0.01 mm graduation and a stated measurement accuracy of ±0.006 mm, giving reliable results for routine quality control. Are measuring rods supplied with the gauge? Yes—the delivery includes eight exchangeable measuring rods, allowing quick adaptation to different depths and component geometries. How does the ratchet stop improve measurements? The ratchet stop on the spindle ensures a consistent contact force, reducing operator variation and making depth readings more repeatable. Is the gauge ready for transport and workshop use? The micrometer is supplied in a protective transport case suitable for workshop handling and transit; the case protects the modular rods and the measuring mechanism. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com