Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
200mm Depth Gauge Round Bridge 100mm, 0.01mm Resolution, Replaceable Tips, Supplied in Case - Metav IndustryLine
Take advantage of the combination of precise 0–200 mm measuring range, 0.01 mm graduation and replaceable measuring rods for reliable depth measurement in workshop and inspection environments; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M309.061 Depth Micrometer — Round Measuring Rods, 0–200 mm, 0.01 mm M309.061 is a depth micrometer designed for accurate depth measurement in machining, fixture assembly and quality inspection tasks, supplied with exchangeable measuring rods for flexible use. High-resolution 0.01 mm scale Ratchet stop for consistent measuring force Replaceable measuring rods for versatility Convex measuring faces for stable contact Precision where it matters: repeatable depth measurement The M309.061 depth micrometer delivers a measuring range of 0–200 mm with a fine graduation of 0.01 mm, making it suitable for the workshop standard class (100–300 mm) where reach and stiffness are balanced. The instrument’s mechanical design achieves an accuracy of ±0.006 mm, which supports tight inspection tolerances and reduces the need for repeat checks. The round measuring bridge and compact span offer stability during measurement, so depth readings are both reliable and directly comparable across production batches. Consistent contact and straightforward rod changes A ratchet stop provides a controlled measuring force, removing variability caused by manual pressure and improving repeatability in series measurements. The micrometer allows simple exchange of measuring rods; eight measuring rods are supplied, giving immediate flexibility for different groove depths and recessed features. The convex measuring faces ensure a defined contact geometry on stepped or slightly irregular surfaces, helping to centre the contact point and reduce rocking that can otherwise distort small depth values. Workshop-ready delivery and practical benefits Supplied in a protective case, the instrument arrives ready for shop-floor use and protected during transport. The set includes a comprehensive selection of measuring rods to cover common tasks without additional purchase, streamlining inspection routines. As a mechanical depth instrument with analogue reading, it combines proven robustness with straightforward handling—ideal for production environments, maintenance shops and incoming inspection stations where fast, dependable depth checks keep throughput moving. For application support, bespoke advice or to order the Metav IndustryLine M309.061 depth micrometer with its ratchet stop and exchangeable measuring rods, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: M309.061 GTIN: 4054469117737 ECLASS: 21170350 ETIM: EC003590 Tariff code: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.006 mm Bridge dimension: 100 x 16 mm Special features Analogue depth micrometer Convex measuring faces Ratchet stop for consistent force Replaceable measuring rods Supplied with 8 measuring rods Delivered in protective case Category: Micrometers / depth micrometer FAQ What measuring range does the micrometer cover? The depth micrometer covers a 0–200 mm range, suitable for standard workshop tasks and medium‑sized components. What resolution and accuracy can be expected? The instrument provides a 0.01 mm graduation and an accuracy of ±0.006 mm, delivering measurement precision for tight tolerances. Are measuring rods included and replaceable? Yes — the set includes 8 measuring rods and the design allows easy replacement of measuring inserts for different depths and applications. Is the micrometer supplied ready for shop use? The instrument is delivered in a protective case with the measuring rods included, making it ready for immediate use in inspection and production. Does the unit include a ratchet stop and what is its benefit? A ratchet stop is fitted to provide a consistent measuring force, which improves repeatability and reduces operator‑dependent variation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Micrometer Digital With ON/ABS/SET/HOLD And mm/inch Display, IP65 - Microtech Metrology
The combination of ISO 17025 traceable calibration, robust IP65 ingress protection and a high-resolution 0–200 mm measuring range delivers reproducible depth measurement for production and inspection environments. Order this depth micrometer directly via Metav Werkzeuge or request application advice from our consultants. Depth Micrometer — Digital depth micrometer with IP65 protection, 0–200 mm (Microtech Metrology) A digital Depth Micrometer designed for precise depth measurement in workshop and laboratory settings, suitable for components and fixtures with depths up to 200 mm. Digital display with ON/ABS/SET/HOLD and mm/inch ISO 17025 calibrated with traceable certificate IP65-rated protection against dust and water Friction ratchet for repeatable measuring force Precision that reduces rework and speeds decision-making This instrument delivers accuracy ±0.006 mm across its 0–200 mm range, combining a fine resolution of 0.001 mm with a calibrated measurement chain to support reliable QC decisions. The digital readout minimises interpretation errors typical of analogue scales and the integrated friction ratchet helps standardise applied measuring force, reducing operator-related variance. As a result, inspection throughput can be increased while scrap and rework are reduced, a clear operational advantage in serial production and incoming inspection. Robust design for demanding shopfloor conditions Engineered for everyday use in industrial environments, the device features an IP65 protection class that shields electronics from coolant spray and dust ingress during routine handling. The digital display offers switching between mm/inch and includes ON/ABS/SET/HOLD functions for flexible measurement workflows and temporary value retention. The construction balances stiffness and accessibility: a stable measuring spindle ensures repeatable contact with the workpiece, while the compact form factor supports handling in confined fixturing without sacrificing stability. Traceable calibration and quality assurance for audit readiness Delivered calibrated to ISO 17025, the tool includes a calibration certificate that documents traceability and measurement uncertainty for compliance procedures. This quality documentation supports internal audits, supplier qualification and control plans where certified measurement results are required. The certified calibration, combined with the instrument's fine resolution, makes it suitable as a portable reference for workshop verification tasks and for integration into documented inspection routines. For traceable depth measurement backed by ISO 17025 certification, contact Metav Werkzeuge to arrange supply or technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 110900205 GTIN: 4061905039898 Manufacturer: Microtech Metrology ECLASS: 21170350 ETIM: EC003590 Facts Measuring range: 0–200 mm Resolution: 0.001 mm Accuracy: ±0.006 mm Protection rating: IP65 Display: digital (ON/ABS/SET/HOLD, mm/inch) Special features ISO 17025 calibration certificate included Friction ratchet for reproducible measuring force Suitable for workshop and laboratory inspection Digital measurement output functions for process flexibility FAQ What measuring range does the instrument cover? The instrument covers a measuring range of 0–200 mm, suitable for medium-range depth checks and fixture validation. Is the device delivered calibrated and with documentation? Yes, the depth micrometer is delivered fully calibrated to ISO 17025 and supplied with a traceable calibration certificate. What level of accuracy and resolution is provided? The device provides accuracy ±0.006 mm with a resolution of 0.001 mm, meeting stringent workshop and inspection requirements. Can the instrument be used in damp or dusty environments? With an IP65 rating, the instrument is protected against dust ingress and low-pressure water jets, making it appropriate for many shopfloor conditions. Which display and measurement functions are available? The digital display supports ON/ABS/SET/HOLD functions and switching between mm and inch for versatile measurement workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Depth Gauge Flat Bridge 100mm, 0.001mm Resolution, RB 4.1 Data Output - Metav IndustryLine
Take advantage of precise 0.001 mm resolution, robust ratchet spindle and digital data output for reliable process integration; these features ensure fast, repeatable depth measurement across workshop and inspection tasks. Order the digital depth gauge directly via Metav Werkzeuge or contact our consultants for application advice. Digital depth gauge M302.171.C — flat bridge, 0–200 mm, 0.001 mm resolution The M302.171.C digital depth gauge is a precision instrument for depth and step measurement in workshop and quality‑control environments, designed with a flat measuring face and a 100 x 16 mm bridge for stable support Digital resolution 0.001 mm for fine readings RB 4.1 data output for digital logging Ratchet spindle for reproducible measuring force Easy replacement of measuring inserts Precision and repeatability for everyday workshop measurement The instrument delivers 0.001 mm display resolution combined with an overall accuracy of 0.006 mm, which makes it suitable for standard industrial inspection and machining tasks. The fine digital readout and ratchet spindle reduce operator‑induced variation by ensuring consistent contact pressure on the measured surface, resulting in reproducible depth and step readings. This balance of resolution and mechanical control supports efficient in‑process checks without overburdening routine workflows. Seamless data capture for traceable documentation Equipped with an RB 4.1 data output and a clear digital display featuring ON/OFF, ABS/INC, UNIT and SET functions, the gauge integrates easily into digital logging systems and quality documentation processes. The available data interface simplifies transfer of measured values to inspection software or SPC systems, speeding up reporting and reducing manual transcription errors. Traceable electronic capture helps maintain production transparency and supports quality management routines. Designed for practical handling and maintenance The flat measuring faces and a 100 x 16 mm bridge provide stable seating during measurement of recesses and steps, while the device’s design allows for easy replacement of measuring inserts, reducing downtime when adapting the tool for different tasks. The instrument is supplied with a set of measuring rods (8 pieces) to extend functionality immediately upon receipt. Its configuration is aimed at machinists and quality engineers who prioritise efficient tool changes and steady handling in routine use. Application context and suitability With a measuring range of 0–200 mm, this depth gauge falls into the standard class for metrology tools, covering the most common workshop and metalworking requirements where a compromise between reach and stiffness is important. Typical applications include depth checks on milled pockets, step measurements on housings and verification of set‑up features on jigs and fixtures. The combination of mechanical stability and fine digital resolution suits both shopfloor measurements and incoming inspection tasks. For reliable depth measurement choose Metav IndustryLine's M302.171.C digital depth gauge and contact Metav Werkzeuge in Emmerich for supply, further technical specifications or advice on system integration Technical data Article number: M302.171.C GTIN: 4054469115122 Brand: Metav IndustryLine Data output: RB 4.1 Display functions: ON/OFF, ABS/INC, UNIT, SET Facts Measuring range: 0–200 mm Resolution: 0.001 mm Accuracy: 0.006 mm Bridge: 100 x 16 mm Measuring faces: flat Special features Ratchet spindle for repeatable force Digital instrument (electronic display) Easy replacement of measuring inserts Accessories included: measuring rod, 8 pcs Eclass: 21170350 / ETIM: EC003590 FAQ What measuring range does this depth gauge cover? The M302.171.C covers a measuring range of 0–200 mm, making it a standard‑range instrument for typical workshop and inspection tasks. How small is the smallest readable increment on the display? The digital display provides a resolution of 0.001 mm, allowing fine increments to be read directly from the instrument. Can measurement data be exported to a PC or data logger? Yes, the gauge supports RB 4.1 data output for connection to data collection systems and logging equipment. Is the measuring force controlled to improve repeatability? The integrated ratchet spindle helps to ensure a reproducible measuring force, improving repeatability in routine measurements. What accessories are supplied with the instrument? The M302.171.C is supplied with measuring rods (8 pieces) to extend its practical range and usability in different measurement scenarios. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Extension Ø15.5mm For Rod Internal Micrometer Sets - Metav IndustryLine
Take advantage of the 200 mm extension with a snug Ø 15.5 mm fit and direct compatibility with the 310.061/64 measuring set to extend internal measuring range with minimal handling. Order the extension directly via Metav Werkzeuge or contact our consultants for compatibility advice. Extension 200 mm, Ø 15.5 mm for 310.061/64 — Metav IndustryLine accessory The Extension 200 mm, Ø 15.5 mm for 310.061/64 is an accessory rod that increases measuring reach for internal measurements and deep bores when used with the corresponding 310.061/64 measuring set. 200 mm extension with Ø 15.5 mm Secure fit for internal measurement tasks Compatible with 310.061/64 measuring sets Extend measuring reach while preserving alignment and repeatability The 200 mm extension adds measurable reach without compromising measurement stability. By maintaining a consistent Ø 15.5 mm interface, the rod provides a coaxial connection to the corresponding measuring set, which helps to reduce bending moments and misalignment during insertion. This results in improved repeatability for deeper internal measurements and fewer re‑set operations on the workbench. The compact mass and straightforward geometry keep handling intuitive and reduce the risk of introducing user‑dependent errors. Seamless compatibility that boosts workshop efficiency Designed specifically for use with the 310.061/64 series, the extension enables quick adaptation of existing measuring equipment to longer internal bores without purchasing a new instrument. The accessory simplifies workflows by cutting the number of tool changes and preserving the original calibration chain. The result is a noticeable time saving in serial tasks and a reduced set of measuring tools required at each station, supporting a more efficient inspection routine. Practical performance for repeatable internal inspections When fitted to the matching measuring set, the extension supports consistent internal measurements across a range of component depths. The simple mechanical interface favours rapid mounting and demounting, which is beneficial where throughput and traceability matter. For quality assurance processes that demand predictable results, the extension offers a pragmatic way to extend measurement capability while keeping calibration and documentation straightforward. Contact Metav Werkzeuge for a compatibility check and to secure the Metav IndustryLine extension for extended internal measurement tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed advice Technical data Article number: M310.061.5 GTIN: 4054469118901 Customs tariff number: 90173000 Weight: 0.4 kg Category: Measuring instruments — Accessories Facts Length: 200 mm Diameter: 15.5 mm Compatible with: 310.061/64 EClass: 21019104 ETIM: EC002219 SKU: M310.061.5 Special features Brand: Metav IndustryLine Accessory type: Extension rod for measuring sets Asset: m3100612-main.jpg FAQ What is the purpose of this extension? The extension increases the measuring reach for internal measurements when used with the 310.061/64 measuring set; it enables access to deeper bores without replacing the core instrument. Will using the extension affect measurement reliability? When correctly mounted to the matching set, the extension maintains alignment via its Ø 15.5 mm interface and supports repeatable results for extended internal measurements. Which measuring sets is the extension compatible with? Compatibility is specified for the 310.061/64 family; the SKU M310.061.5 identifies the exact accessory for those sets. What are the physical dimensions of the extension? The rod measures 200 mm in length with a diameter of 15.5 mm and a listed weight of 0.4 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Extension, Ø22mm For Rod Inside Micrometer Sets, Accessory - Metav IndustryLine
Take advantage of the 200 mm extension and Ø22 mm diameter to increase measurement reach and secure mounting for compatible measuring sets; the lightweight construction (approx. 0.4 kg) supports efficient handling in workshop routines. Order the extension directly via Metav Werkzeuge or consult our technical team for integration advice. Extension 200 mm, Ø22 mm for 310.062/310.063 (Metav IndustryLine) — measuring-rod extension with secure fit The Extension 200 mm, Ø22 mm for 310.062/310.063 is a purpose-built accessory that lengthens the reach of compatible measuring assemblies, enabling measurements in deeper bores and extended internal spaces while maintaining a compact footprint. 200 mm extension for increased reach 22 mm diameter for secure mounting Lightweight: 0.4 kg for easy handling Fits models 310.062 and 310.063 Extend reach without compromising stability for deeper measurements The 200 mm extension provides a straightforward solution when standard probes cannot reach internal features or deep bores. By adding this extension to a compatible measuring assembly, the accessible measuring length increases while maintaining the original seating geometry; this reduces the need for makeshift adapters and preserves measurement reproducibility. The Ø22 mm shaft diameter ensures a stable connection to mating components, which is critical for consistent axial alignment and repeatable internal measurements in production and inspection contexts. Designed for efficient workshop handling and quick integration With an approximate weight of 0.4 kg, the component is light enough for easy handling during setup yet substantial enough to resist inadvertent movement during measurement cycles. The extension is intended as a direct accessory for specified model ranges, allowing rapid assembly without special tools. This simplifies workflow on the shop floor: less time spent adapting equipment translates into higher throughput and lower setup variance. The robust interface and standard dimensions facilitate integration into existing measuring fixtures and portable inspection rigs. Application scope: where longer internal measurement reach is required This accessory is suitable for extended internal measurement tasks in toolrooms, maintenance shops and production quality control where deeper reach is necessary. Compatible with the referenced model series, the extension lets existing measuring instruments measure components with recessed bores, sleeves or assemblies that would otherwise require special fixtures. The extension supports precision inspection processes by enabling the original measuring tip to remain the guiding reference, thereby preserving the instrument’s calibration and measurement chain. For a secure fit and seamless extension of measuring capability with Metav IndustryLine accessories, contact Metav Werkzeuge in Emmerich for ordering details or technical integration support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M310.063.4 GTIN: 4054469118987 Weight: 0.4 kg Tariff number: 90173000 Compatible with: 310.062 / 310.063 Core specifications Extension length: 200 mm Diameter: 22 mm Special features Accessory for rod-style measuring assemblies Category: Accessories (measuring devices) Brand: Metav IndustryLine FAQ What does the extension do and when is it used? The extension increases the measuring reach by 200 mm so recessed bores and deep internal features can be inspected using compatible measuring assemblies. Which models is the extension compatible with? This accessory is compatible with the 310.062 and 310.063 model series and is designed for straightforward integration with those assemblies. How does the Ø22 mm diameter affect performance? The Ø22 mm diameter provides a stable seating interface that helps maintain axial alignment and repeatability during internal measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Setting Gauge Metric 60 - Microtech Metrology
Take advantage of a compact 200 mm metric reference that combines reliable reproducibility with straightforward workshop integration; the Metric 60 specification ensures compatibility with common metric setups and test fixtures. Benefit from consistent set‑ups and reduced adjustment time; order the setting gauge directly via Metav Werkzeuge or ask our consultants if needed. Setting Gauge — 200 mm, Metric 60 (Microtech Metrology) The Setting Gauge is a metric reference accessory designed for precise instrument set‑up and repeatable measuring routines in workshops and inspection benches. 200 mm nominal length Metric 60 compatibility Precision reference for instruments Accessory for measuring devices Consistent setups with a compact metric reference A compact metric reference gauge delivers repeatable starting points for routine set‑ups and verification tasks. The 200 mm nominal length fits standard caliper and fixture ranges, providing a stable datum without occupying excessive bench space. By using a clearly defined metric standard such as Metric 60, workshops can reduce variability in instrument adjustments and accelerate changeovers between jobs. This measurable consistency supports production quality and faster throughput without additional process complexity. Integrates directly into common metrology workflows Designed as an accessory for measuring devices, this reference can be used when setting up comparators, test fixtures or as a quick verification artefact on the shop floor. The Metric 60 designation simplifies matching the gauge to metric systems and fixturing arrangements commonly found in engineering shops. As a compact calibration aid, it assists technicians and quality personnel to maintain traceable baselines for routine checks, helping to avoid unnecessary instrument downtime and ensuring parts remain within specification tolerances. Practical advantages for everyday inspection and maintenance The reference gauge is useful for initial instrument alignment, routine verification of measuring equipment and as a stable workshop datum for production checks. Its straightforward form factor supports rapid placement and repeatable contact points, which contributes to a reduction in set‑up time and a smoother inspection cycle. For procurement and inventory, the item is listed under the measuring‑instrument accessories category and carries a unique GTIN and article number for traceable stock management within supply chains and quality systems. Choose the Microtech Metrology 200 mm setting gauge with Metric 60 for dependable metric references — contact Metav Werkzeuge in Emmerich for procurement advice and delivery from our European quality hub. Technical data Article number: 110710020 GTIN: 4061905459221 Manufacturer: Microtech Metrology Core measurements Nominal length: 200 mm Category: Accessories (measuring instruments) Special features Metric 60 FAQ What is the nominal length of this reference gauge? The nominal length is 200 mm as stated for the Microtech Metrology setting gauge (SKU 110710020). Is this item intended for instrument set‑up or final calibration? This setting gauge serves as a reference for instrument set‑up and routine verification; final calibration steps depend on the laboratory procedure applied to the measuring device. Which workflows benefit most from a Metric 60 reference? Metric 60 compatibility makes the gauge suitable for metric fixturing, caliper set‑ups and bench verification routines in machining, inspection and small‑batch production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Three-Point Internal Micrometer With Carbide Measuring Faces, Ratchet Stop, 175–200mm Range, In Case - Metav IndustryLine
Take advantage of three-point internal measurement, robust carbide measuring faces and a ratchet stop for reproducible contact force; this combination delivers reliable bore control across the 175–200 mm span and supports consistent production processes. Order the micrometer directly via Metav Werkzeuge or ask the consultants for tailored advice. Three-point internal micrometer M312.149 — 175–200 mm, carbide measuring faces (Metav IndustryLine) The three-point internal micrometer M312.149 is a precision instrument for reproducible bore measurement in machine construction and toolrooms, designed for medium-range internal diameters and repeatable workshop use Three-point internal measurement Carbide measuring faces (HM) Range 175–200 mm Ratchet stop for reproducible force Consistent bore accuracy for workshop production The three-point measuring principle ensures that the measuring contact points centre automatically in cylindrical bores, reducing eccentricity and improving repeatability. With an indicated accuracy of 0.007 mm and a vernier reading of 0.005 mm, the instrument provides the level of precision expected in standard machine‑shop quality control. The combination of precise centring and fine reading capability supports shorter inspection cycles and fewer reworks, which contributes directly to production efficiency. Built for reproducible handling and longevity A built-in ratchet stop guarantees consistent measuring force across repeated measurements, which cuts operator-induced variation and makes the process predictable. The measuring faces are made of carbide (HM) for wear resistance in everyday workshop use, while the matt chrome‑plated scale and vernier improve contrast and legibility under workshop lighting. Despite its solid construction, the tool remains manageable at a nominal weight of 3.7 kg, and it is supplied in a hardened transport box for safe handling and storage during transfer. Ideal for standard-range internal measurements Classified in the Standard range (up to 300 mm), the instrument covers the common span used in mechanical engineering, jigs and fixtures, and component inspection. The measuring range of 175–200 mm with a measuring depth of 140 mm makes it suitable for medium‑sized bores, housings and assembly parts where both reach and stiffness are required. Delivery is made without an adjustment ring; calibration or adjustment procedures should be planned accordingly when integrating the micrometer into an inspection procedure. Practical advantages that support daily workflows The micrometer’s three-point geometry reduces the need for repositioning during interior measurements, saving time when multiple bores must be checked. The analogue vernier is straightforward to use for operators accustomed to mechanical instruments, and the ratchet stop simplifies training by ensuring uniform contact force. For teams seeking reliable, low‑maintenance gauges for workshop inspection, this instrument offers a pragmatic blend of durability and measurement quality that sustains throughput and reduces measurement uncertainty. For product enquiries or assistance choosing the correct internal measuring instrument, contact Metav Werkzeuge for personalised support and procurement from their Emmerich stock Technical data Article number: M312.149 GTIN: 4054469119557 Label: Dreipunkt-Innenmess, 175 - 200 mm with HM measuring faces; without setting ring, 2.3 kg Manufacturer: Metav IndustryLine Facts Measuring range: 175–200 mm Measuring depth: 140 mm Accuracy: 0.007 mm Reading: 0.005 mm Weight: 3.7 kg Special features Three-point internal measurement Carbide measuring faces (HM) Matt chrome-plated scale and vernier Ratchet stop for reproducible force Supplied in a transport box Delivery without setting ring Analogue vernier instrument Category: Measuring micrometres / internal micrometres FAQ What measurement range does the micrometer cover? The three-point internal micrometer M312.149 covers 175–200 mm and is intended for medium‑sized internal diameters in workshop inspection. Are the measuring faces wear resistant? Yes, the M312.149 is fitted with carbide (HM) measuring faces, which provide high wear resistance for routine workshop use. Is a calibration certificate supplied with the instrument? The product is supplied as described; no ISO 17025 certificate is indicated in the data. Calibration status should be confirmed with Metav Werkzeuge if a traceable certificate is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200–225 mm Digital Micrometer 0.001 mm Resolution Ratchet Spindle, Matt Chrome Measuring Faces, Supplied in Case - Metav IndustryLine
Take advantage of high-resolution 0.001 mm measurement, a secure ratchet thimble for repeatable contact pressure and a robust matt‑chromed measuring drum to keep inspection cycles consistent; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Digital Micrometer M302.262 — 200–225 mm, 0.001 mm resolution (Metav IndustryLine) A Digital Micrometer M302.262 for precise external measurements in workshop and quality‑control environments, optimised for components within the 200–225 mm measuring range High-resolution 0.001 mm digital readout Ratchet thimble for repeatable contact pressure Matt-chromed measuring drum and satin finish Hardened measuring faces Ø6.5 mm Precise readout that speeds inspection and reduces rework The instrument delivers a 0.001 mm digital resolution, enabling confident decisions in serial inspection and first‑piece checks. The clear digital display with ON/OFF/SET and ABS/INC/UNIT keys supports both absolute and incremental readings, eliminating manual interpolation and shortening measuring cycles. Designed for standard workshop tasks within the 200–225 mm range, the device provides a reliable balance between reach and handling, helping to reduce throughput bottlenecks in quality control. Robust mechanics for repeatable contact and long-term stability A ratchet thimble ensures a consistent measuring force, which reduces operator‑induced variation and improves reproducibility across repeated measurements. The frame is painted for corrosion protection while the measuring drum is matt‑chromed, offering wear resistance and smooth operation. With hardened measuring faces Ø6.5 mm, the tool withstands routine use on shafts and bosses, maintaining form and accuracy even under demanding shop conditions. Practical compliance and workflow benefits for inspection stations Manufactured to DIN 863, this micrometer matches established workshop standards and integrates easily into existing inspection routines. The combination of a digital absolute mode and incremental function supports common measurement tasks such as step, outside and depth checks when used alongside appropriate fixtures. The instrument’s clear labelling and tactile controls reduce training time for operators and accelerate data capture during routine quality checks. Operational advantages and recommended applications Built for external measurement of turned parts, flanges and large fittings, the unit is particularly suited to production environments and maintenance shops requiring repeatable high‑precision checks. The solid construction and ergonomic thimble support fast, fatigue‑resistant operation, while the digital readout minimises transcription errors. For traceable inspection processes, the micrometer complements standard metrology toolsets and serves as a dependable hand‑held instrument for incoming inspection and in‑process control. Contact Metav Werkzeuge today to secure this Metav IndustryLine digital micrometer for reliable, high‑resolution measurements or speak with our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for application guidance Technical data Article number: M302.262 GTIN: 4054469151809 Category: Messschrauben (Micrometers) Standard: DIN 863 Facts Measuring range: 200–225 mm Resolution: 0.001 mm Measuring faces Ø: 6.5 mm Tariff number: 90173000 Special features Frame painted; measuring drum matt‑chromed Digital display with ON/OFF/SET and ABS/INC/UNIT keys Ratchet thimble for consistent contact force Hardened measuring faces Digital operation FAQ What is the measurement resolution of this micrometer? The M302.262 offers a digital resolution of 0.001 mm, providing fine discrimination for detailed external measurements. Which measuring range does the instrument cover? The micrometer covers the 200–225 mm range, making it suitable for medium to large components in production and maintenance work. Does the device meet recognised standards? Yes, the M302.262 is manufactured to DIN 863, aligning it with common workshop metrology requirements. What mechanical features assist repeatability? A ratchet thimble is incorporated to ensure uniform contact pressure, reducing operator influence on measurement results when using the Metav IndustryLine micrometer. For which applications is this micrometer best suited? The instrument is intended for external measurements on shafts, flanges and turned parts where repeatable, high‑resolution checks are required in workshop and quality environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200–225 mm Digital Three-Point Internal Gauge For Blind Holes, Carbide Measuring Faces, Digital Readout, Supplied In Case - Metav IndustryLine
Combine high reproducibility with straightforward data integration and robust carbide measuring faces to speed up blind‑hole inspections and reduce rework. Order the instrument directly via Metav Werkzeuge or ask our consultants for application advice. Digital Three‑Point Internal Micrometer M312.260.S — Digital instrument, 200–225 mm range, carbide measuring faces (Metav IndustryLine) The Digital Three‑Point Internal Micrometer M312.260.S is a workshop‑grade instrument designed for precise blind‑hole measurement in production and quality control. Digital readout with ON, mm/inch, ABS, PRESET, HOLD Measuring range 200–225 mm for blind‑hole inspection Carbide measuring faces for wear resistance RB‑4 data output for integration into systems Precise measurement where repeatability matters The instrument delivers repeatable internal measurements across its measuring range 200–225 mm, classifying it in the Standard category for general machine‑shop and metalworking tasks. The digital readout offers a fine resolution of 0.001 mm, while the stated accuracy ±0.008 mm (8 µm) ensures results that meet routine production tolerances. This combination reduces measurement uncertainty and supports consistent quality control procedures without slowing cycle times. Fast data capture and process integration Equipped with an intuitive display and multiple function keys (ON/0, mm/inch, ABS, PRESET and HOLD), the instrument streamlines workflow for inspection tasks. The RB‑4 data output enables direct transfer of measured values into SPC or data‑collection systems, cutting manual transcription errors and accelerating documentation. For manufacturers seeking measurable productivity gains, the ability to log results electronically represents a clear operational advantage. Robust mechanical design for blind‑hole work The three‑point measuring principle provides stable contact and self‑centring inside bores, which is particularly beneficial for blind‑hole measurement where flank accessibility is limited. The contact surfaces are carbide measuring faces, delivering high wear resistance and long service life in production environments. With a measuring depth of 140 mm and a solid build weighing 4.8 kg, the device combines stiffness with the reach required for medium‑sized components, reducing rechecks and maintenance intervals. Practical workshop readiness and setup Delivery excludes a setting ring, so initial reference calibration requires a suitable master gauge (refer to internal standards). The model is indicated as the 2023 version and is configured for direct workshop use, providing clear on‑screen functions for unit changes and presetting. The compact control layout simplifies operation for operators with varying experience levels and supports quick familiarisation during shift handovers. Contact Metav Werkzeuge today for tailored advice on the Metav IndustryLine digital three‑point internal micrometer M312.260.S, application recommendations and procurement from our Emmerich location via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M312.260.S GTIN: 4054469158990 Category: Messschrauben Model year: 2023 Facts Measuring range: 200–225 mm Measuring depth: 140 mm Resolution: 0.001 mm Accuracy: 0.008 mm Weight: 4.8 kg Customs tariff number: 90173000 Special features Digital display with ON/0, mm/inch, ABS, PRESET, HOLD Data output: RB 4 Carbide measuring faces (HM) Delivery without setting ring Designed for blind‑hole (Sackloch) measurement FAQ Which bore types is this instrument intended for? The instrument is designed specifically for blind‑hole measurement and performs well on medium‑sized internal bores within the 200–225 mm range. What level of accuracy can be expected in routine inspection work? Routine inspections with this digital internal micrometer typically achieve an accuracy of ±0.008 mm, with a display resolution of 0.001 mm for clear readouts. Is a setting ring included for calibration? No; delivery is without a setting ring. A calibrated master gauge or ring standard is recommended for initial setup and verification. How are measurement results transferred to quality systems? Measurement values can be exported via the RB‑4 data output, enabling direct integration with SPC and data‑collection systems to avoid manual entry errors. Are the measuring faces suitable for high‑volume production? Yes; the carbide measuring faces provide enhanced wear resistance and extended service life under industrial use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200–225 mm Ratchet Thimble Micrometer 0.01 mm, Blue Powder Coating, Matt Chrome Thimble, DIN 863 - Metav IndustryLine
Take advantage of precise, repeatable readings thanks to the ratchet stop and 0.01 mm graduation together with a robust, powder‑coated frame for reliable workshop performance; order directly via Metav Werkzeuge or consult our specialists for specification support. M304.416 — Metav IndustryLine outside micrometer, 200–225 mm, 0.01 mm ratchet The M304.416 is an outside micrometer engineered for accurate external dimension measurement in metalworking and quality control applications; suitable for routine inspection and workshop use. 200–225 mm measuring range 0.01 mm graduation for fine readings Ratchet stop for consistent measuring pressure Blue powder‑coated frame with chrome drum Consistent, repeatable external measurements The analogue graduation of 0.01 mm and the integrated ratchet stop create highly repeatable readings by limiting operator‑induced force variations. The spindle advances with a 0.5 mm pitch, providing tactile, predictable engagement for incremental setting and fine adjustment. Compliance with DIN 863 ensures the instrument meets recognised workshop standards for mechanical micrometers, while the matt‑chrome measuring drum combines clear scale visibility with durable surface wear properties. These aspects together reduce measurement scatter and support standardised inspection routines on production lines and in inspection rooms. Rugged construction for daily workshop demands Built around a blue powder‑coated frame and a matt‑chromed measuring drum, the micrometer resists corrosion and visible wear in industrial environments. The measuring faces are included and finished for stable contact geometry, the spindle diameter of 6.5 mm adds stiffness at the contact point, and the overall design is tuned for handling heavy‑duty use without sacrificing feel. As an analogue instrument, this micrometer is straightforward to read and maintain, making it suitable for bench‑level quality checks and repetitive dimensioning where mechanical reliability and quick operation are priorities. Designed for inspection workflows and traceability The micrometer supports standard inspection workflows: clear graduations speed up data capture and the ratchet stop promotes consistent force application across multiple operators. The instrument is classified for external measurements in the 200–225 mm range, making it appropriate for medium‑sized components and assemblies in toolmaking, machining and maintenance shops. Delivered as a workshop‑ready instrument, this model integrates with established metrology stations and complements digital or manual record‑keeping practices. Metav’s position as a precision partner ensures access to documentation and product information for procurement and quality teams. Contact Metav Werkzeuge for detailed technical matching or to request application advice for this Metav IndustryLine outside micrometer (M304.416) Technical data Article number: M304.416 GTIN: 4054469116952 Category: Messschrauben (outside micrometer) Manufacturer: Metav IndustryLine Core data Measuring range: 200–225 mm Graduation / resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Standard: DIN 863 Analog instrument Special features Ratchet stop for defined measuring pressure Frame painted (powder coating), measuring drum matt chrome Measuring faces included Suitable for routine workshop and inspection use FAQ What level of accuracy can be expected from this micrometer? The Metav IndustryLine outside micrometer M304.416 features a 0.01 mm graduation and is manufactured to DIN 863 tolerances, offering the repeatability and mechanical precision expected in standard workshop measurements. How does the ratchet stop improve measurement quality? The ratchet stop on the M304.416 limits applied force, ensuring consistent contact pressure and reducing variation between operators for more reproducible external measurements. Are the measuring faces hardened or treated for wear? The measuring faces are supplied as part of the instrument and the measuring drum is matt‑chrome plated; the finish supports long‑term stability and readable graduations under regular workshop conditions. Is this micrometer suitable for heavy machining components? With a measuring range of 200–225 mm and a robust frame, the instrument is suited to medium‑sized components in machining and toolmaking, offering a balance of reach and rigidity for everyday inspection tasks. Can the micrometer be integrated into inspection routines alongside digital systems? Yes; the clear analogue graduations and stable mechanical behaviour of the M304.416 make it compatible with established inspection workflows and manual data capture that often accompany digital quality‑management systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200–225 mm Three-Point Internal Micrometer For Blind Holes, Carbide Measuring Faces, Depth 140 mm, Ratchet, Case - Metav IndustryLine
The robust three-point internal measuring instrument combines a three-point geometry, carbide measuring faces and a ratchet thimble to deliver reproducible results in blind-hole inspection; benefit from precise analogue reading and stable handling for medium-range components. Order the Three-point internal micrometer M312.150.S directly via Metav Werkzeuge or ask the consultants for application guidance. Three-point internal micrometer M312.150.S — 200–225 mm, carbide measuring faces (Metav IndustryLine) The Three-point internal micrometer M312.150.S is an analogue instrument designed for precise measurement of blind-hole bores in medium-sized components across workshops and toolrooms. Three-point measurement for blind holes Carbide measuring faces for increased wear resistance Range 200–225 mm for medium workpieces Ratchet thimble for consistent measuring force Accurate internal measurements for blind holes The three-point measuring geometry ensures that diameter values are taken at three radial contact points, which stabilises the datum and reduces eccentricity when checking blind-hole bores. With an indicated accuracy ±0.008 mm and a vernier reading 0.005 mm, this analogue instrument gives a reliable balance between sensitivity and robustness for routine inspection. The design is particularly suited to measuring bores where single-point probes can tilt or give variable readings; the three-contact system averages out minor misalignments and simplifies comparison against tolerance bands. Durable build and repeatable handling for daily use Construction details prioritise longevity and user control: the contact faces are made from carbide, resisting wear during repeated measurements, while the matt-chrome scale and vernier minimise glare and ensure clear reading. The integrated ratchet thimble provides a reproducible measuring force, which reduces operator-induced variation and supports consistent results across shifts. The instrument’s mass and geometry provide stable handling for workshop tasks, and the analogue mechanism is favoured where battery-free, low-maintenance tools are required. Prepared for medium-range workshop applications With a measuring span of 200–225 mm and a measuring depth of 140 mm, the instrument falls into the standard workshop range for medium-sized components, fixtures and assemblies. It is therefore well suited to machine shops, jig and fixture inspection, and quality checks on housings and sleeves where blind-hole diameters must be verified. The device is supplied without a setting ring; calibration and setting procedures should be planned accordingly. Traceable identification (GTIN and article number) is provided for inventory and procurement processes. Contact Metav Werkzeuge today to discuss whether the Metav IndustryLine Three-point internal micrometer M312.150.S fits your inspection routine and to request further technical details from our specialists at Metav Werkzeuge GmbH in Emmerich. Technical data Article number: M312.150.S GTIN: 4054469158723 Category: Internal micrometers Facts Measuring range: 200–225 mm Measuring depth: 140 mm Accuracy: ±0.008 mm Reading: 0.005 mm Weight: 4.3 kg Tariff number: 90173000 Special features Three-point internal measuring geometry Carbide measuring faces Matt-chrome scale and vernier Ratchet thimble for reproducible force Analogue instrument for blind-hole bores Supplied without setting ring FAQ What measuring range does the instrument cover? The Three-point internal micrometer M312.150.S covers a measuring range of 200–225 mm and is intended for medium-sized workpieces. How precise is the measurement result? The device offers an accuracy of ±0.008 mm with a vernier reading increment of 0.005 mm, which supports routine dimensional checks and quality control. Are the contact faces suitable for high-use inspection? Yes; the contact faces are made from carbide, which increases wear resistance and prolongs service life even under frequent use. Is a setting ring included for calibration? Delivery is without a setting ring; calibration and setting must be performed with an appropriate gauge or reference ring. For which applications is this instrument especially suited? The instrument is optimised for blind-hole measurements in machine parts, assemblies and fixtures within the standard workshop range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200–225 mm Three-Point Internal Micrometer With Carbide Measuring Faces, Ratchet, Supplied In Case - Metav IndustryLine
Benefit from precise, repeatable internal measurements across the 200–225 mm range thanks to the combination of three-point centring and a ratchet stop; the matt‑chrome scale and carbide measuring faces ensure durable, low-maintenance use in production and inspection. Order the instrument via Metav Werkzeuge or consult our specialists for application advice. Three-point internal micrometer M312.150 — 200–225 mm, carbide measuring faces (Metav IndustryLine) A robust three-point internal micrometer M312.150 designed for accurate internal diameter checks in the 200–225 mm range, suited to workshop inspection and quality control tasks Three-point centring for stable internal contact Carbide measuring faces for long wear life Ratchet stop for consistent measuring force Matt‑chrome scale and vernier for clear reading Repeatable internal diameters with three-point centring The three‑point contact arrangement provides stable seating against bore surfaces, reducing measuring variation caused by tilt or misalignment. Combined with the 200–225 mm measurement span, this design delivers repeatable internal diameter checks on medium‑sized components, making the tool suitable for batch inspection or set‑up control. The instrument’s construction focuses on consistent contact geometry, which directly reduces rework and speeds up quality decisions. Durable contact surfaces and controlled measuring force Wear resistance is ensured by carbide measuring faces, which keep measuring geometry intact even under frequent use. The integrated ratchet stop enforces a uniform measuring force, eliminating a common source of operator error and improving consistency between readings. Together these features support higher throughput with fewer rejects, since each measurement is taken under the same mechanical conditions and with long‑term dimensional stability. Clear scales and practical handling for workshop use A matt‑chrome scale and vernier improves contrast under shop lighting and resists reflection, aiding fast reading of the nonius. With a fine reading 0.005 mm and accuracy ±0.008 mm, the instrument bridges the gap between routine workshop control and high‑precision verification. The design includes a deep measuring capability—measuring depth 140 mm—so inner features and deeper bores can be accessed without auxiliary extensions. Supply, set‑up and workshop integration The micrometer is supplied ready for workshop use in a transport case and is delivered without a setting ring; this should be considered when integrating into a calibration routine or fixed inspection station. The analogue format with vernier is straightforward to use where digital outputs are not required, and the robust material choices keep maintenance cycles short. For customers seeking a balance of durability and measuring fidelity, this instrument supports stable process control across repeated checks. For dependable large‑bore inspection tasks choose the Metav IndustryLine three‑point internal micrometer; contact Metav Werkzeuge for technical clarification and local stock information at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: M312.150 GTIN: 4054469119564 ECLASS: 21170335 ETIM: EC003590 Facts Measuring range: 200–225 mm Measuring depth: 140 mm Reading: 0.005 mm Accuracy: 0.008 mm Special features Three‑point internal measuring instrument Carbide measuring faces (HM) Ratchet stop Scale and vernier matt‑chrome plated Supplied in transport case Delivery without setting ring Analogue (nonius) instrument FAQ What applications is this three‑point internal micrometer suitable for? The three‑point arrangement and M312.150 range make it well suited to internal diameter checks on medium‑sized components in workshop inspection and fixture set‑up tasks. Does the instrument come calibrated? The standard delivery does not include an ISO 17025 calibration certificate; the M312.150 is supplied ready for use and should be checked against a setting ring or master gauge as required for quality assurance routines. How do the carbide measuring faces affect maintenance intervals? Carbide faces on the Metav IndustryLine micrometer provide superior wear resistance, extending the intervals between re‑grinding or replacement compared with steel faces. Is the ratchet stop adjustable or fixed? The ratchet stop is integrated to provide a consistent measuring force; it is designed to ensure repeatable contact without operator‑dependent variation. Can this tool be used for deep bores? With a measuring depth of 140 mm, the instrument accesses relatively deep features within its 200–225 mm range, enabling measurement of internal steps and deep recesses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200–225mm Micrometer With 35mm Anvil Plates, Touchscreen Display, Wireless+USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise external measurement with 0.008 mm resolution together with integrated data transfer and a certified calibration workflow for reliable quality control; order the instrument via Metav Werkzeuge or request technical advice from our consultants. Outside Micrometer — digital touchscreen, 200–225 mm, Microtech Metrology A digital outside micrometer designed for accurate external measurements in workshop and laboratory environments, covering the 200–225 mm measuring range for standard metalworking tasks. Digital touchscreen 1.54" display ISO 17025 calibrated with certificate Wireless plus USB data output 35 mm disc measuring faces Minimise rework with consistently tight tolerances The micrometer delivers a measured accuracy of 0.008 mm, making it suitable where sub‑0.01 mm control reduces scrap rates and rework. The digital touchscreen 1.54" offers clear numeric read‑out and direct status feedback, while the metal‑tooled spindle and flat 35 mm disc anvil ensure a stable contact geometry that lowers measurement scatter. For production lines and incoming inspection, the instrument provides a robust metrological basis that supports repeatable decision‑making and shorter inspection cycles. Traceability and certified calibration for audit-ready documentation Calibration is performed and supplied in accordance with ISO 17025, including an official calibration certificate: a decisive advantage for quality systems that require documented traceability. The delivered certificate confirms measurement capability and permits direct integration into existing inspection records. Laboratories and quality managers benefit from documented uncertainty budgets and a recognised standard for inter‑laboratory comparability, simplifying compliance during audits and supplier assessments. Streamlined data capture for process control and SPC Equipped with Wireless and USB data outputs, the instrument enables straightforward capture of measurement data into statistical process control systems or digital logbooks. The combination of immediate digital readout and remote data transfer reduces transcription errors and speeds up data flow to MES or QA software. For production engineers seeking tighter process feedback loops, this connectivity supports quicker corrective actions and traceable measurement histories. Designed for repeatable contact and practical handling A non‑rotating spindle minimises wear patterns and helps produce consistent surface contact, while the disc‑shaped measuring faces distribute contact pressure evenly on broader workpiece features. The 200–225 mm measuring range places this micrometer in the standard class for machine and metalwork applications, offering a practical balance of reach and rigidity for components such as housings, shafts and precision fittings. The digital format combines tactile micrometer mechanics with modern readout convenience for everyday inspection tasks. Contact Metav Werkzeuge today to discuss integration, request the ISO 17025 calibration certificate with delivery, or place an order for the Microtech Metrology outside micrometer (SKU 110782257) via Metav Werkzeuge for fast, reliable supply from Emmerich. Technical data Article number: 110782257 GTIN: 4061905457524 Manufacturer: Microtech Metrology Facts Measuring range: 200–225 mm Accuracy: 0.008 mm Display: Touchscreen 1.54" Data output: Wireless + USB Special features ISO 17025 calibration certificate included 35 mm disc measuring faces Non‑rotating spindle Digital micrometer format FAQ What measuring range does this micrometer cover? The Microtech Metrology outside micrometer covers a measuring range of 200–225 mm (SKU 110782257), classified as a standard range suitable for general machine‑shop measurements. Is a calibration certificate supplied with the instrument? Yes. The micrometer is delivered with an ISO 17025 calibration certificate, confirming traceability and suitability for accredited quality systems. How is measurement data exported from the device? Measurement values can be transmitted via Wireless connection or through the USB port for direct capture into quality control software and process documentation. What makes the measuring faces suitable for workpieces? The 35 mm disc measuring faces provide broad, even contact that reduces local deformation and improves repeatability on larger external features. Can this instrument be used for shop‑floor production control? Designed for workshop and laboratory use, the digital micrometer provides the accuracy and connectivity required for production control and SPC tasks, with the added assurance of ISO 17025 calibration. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200–300 mm Micrometer Caliper Set With Setting Gauge, Ratchet, Blue Powder Coating, Case - Metav IndustryLine
Take advantage of a robust workshop kit that combines repeatable precision, durable blue powder-coated frames, and simple handling for fast measurements. The set of four outside micrometers covers the 200–300 mm range with fine spindle control and a protective case; order the set directly via Metav Werkzeuge or consult their specialists for technical advice. Metav IndustryLine M304.422 – Outside micrometer set, 200–300 mm, ratchet stop The Metav IndustryLine M304.422 is a four-piece set of analogue outside micrometers designed for shop‑floor use, covering the 200–300 mm measuring range with ratchet stops and hardened measuring faces for repeatable results Range 200–300 mm in four steps Blue powder-coated frames for corrosion resistance Ratchet stop for consistent measuring force Supplied in a protective case Dependable precision for everyday workshop control This micrometer set was designed to deliver consistent, repeatable measurements across medium-sized components. Classified for the workshop standard range of 200–300 mm, the four gauges extend reach while keeping handling manageable; each instrument incorporates hardened measuring faces for wear resistance and a mechanical reading graduated to 0.01 mm, making the set suitable for machine‑shop tolerance checks and fixture setup. Compliance with DIN 863 underlines the instruments’ suitability for routine dimensional control, so inspection tasks become more reliable and traceable. Built for practical handling and low downtime Durability and operator ergonomics are central to the design. The frames are blue powder-coated to resist chips and corrosion, while the measuring drum matt chrome-plated finish improves legibility and wear resistance. A ratchet stop ensures a constant measuring force, reducing variation from manual operation, and the spindle geometry (6.5 mm spindle body with spindle pitch 0.5 mm) balances stiffness with fine adjustment. The analogue construction keeps maintenance straightforward and avoids battery dependencies, which is advantageous for continuous shop use. Complete set for safe transport and workshop readiness Delivered as a set of four gauges with matching adjustment standards (200 / 225 / 250 / 275 mm), the package is arranged for straightforward storage and transport in a sturdy case. The robust packaging and overall weight (approx. 12.3 kg for the set) reflect a workshop solution intended for frequent use and movement between benches. The combination of protective case, hardened faces and precision spindles reduces service intervals and keeps inspection moving — a practical investment for suppliers, toolrooms and production lines that demand dependable dimensional control. For robust, shop-ready precision choose the Metav IndustryLine M304.422 micrometer set and contact Metav Werkzeuge for availability or bespoke advice — Metav Werkzeuge in Emmerich is ready to support specification and delivery. Technical Data Article number: M304.422 GTIN: 4054469117010 Manufacturer: Metav IndustryLine Norm: DIN 863 Core specifications Measuring range: 200 mm – 300 mm Resolution / reading: 0.01 mm Spindle diameter: 6.5 mm Spindle pitch: 0.5 mm Pieces per set: 4 Weight: 12.3 kg Materials & special features Frame painted, blue powder-coated Measuring drum matt chrome-plated Hardened measuring faces Ratchet stop (constant force) Analogue micrometers Adjustment gauges included: 200 / 225 / 250 / 275 mm Supplied in protective case FAQ Are these micrometers suitable for workshop calibration tasks? Yes. The Metav IndustryLine M304.422 set is designed for workshop calibration and routine dimensional control, complying with DIN 863 and equipped with hardened measuring faces for durable performance. What measuring steps are included in the set? The set contains four outside micrometers covering the 200–300 mm range and includes adjustment gauges at 200, 225, 250 and 275 mm for verification and quick checks. How does the ratchet stop help measurement quality? The ratchet stop provides a repeatable measuring force that reduces operator‑dependent variation; fitted to each micrometer in the M304.422 set for more consistent results. Is the finish suitable for a busy production environment? Yes. The blue powder‑coated frames and matt chrome‑plated measuring drums resist wear and corrosion, making the set appropriate for frequent shop use. Can the measuring faces be reconditioned or replaced? The micrometers feature hardened measuring faces to extend service life; in case of wear, components can be serviced by qualified workshop maintenance. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Crimp Height Micrometer Digital Touchscreen, ISO 17025 Calibrated, IP65 - Microtech Metrology
Benefit from ±0.003 mm measurement accuracy, full ISO 17025 calibration and seamless wireless data transfer for reliable, traceable crimp inspection. The combination of high-resolution reading, robust IP65 protection and a CNC‑machined aluminium housing ensures long‑term stability and simple integration into production systems. Order the instrument directly via Metav Werkzeuge or consult the advisers for specification support. Microtech Crimp Height Micrometre with Colour Touchscreen and Wireless Data A Microtech crimp height micrometre designed for fast, traceable crimp-height inspection and quality control in production and laboratory environments. ISO 17025 calibration certificate included Wireless and USB data output for Industry 4.0 IP65 protection for shop-floor use CNC-machined aluminium housing for durability Traceable precision for production and QA The instrument delivers a reading resolution of 0.0001 mm and a verified accuracy of 0.003 mm, which supports repeatable decisions in incoming inspection and process control. Supplied with an ISO 17025 calibration certificate, the device enables documented traceability for audit and certification requirements. The high resolution and calibrated status reduce rework and dispute time by providing objective evidence of crimp geometry. Built for digital workflows and Industry 4.0 Equipped with a 1.5" colour touchscreen, onboard memory for 2000 values and multiple data modes, the instrument is prepared for automated data capture. Data transfer options include wireless to the MDS app, Wireless HID, USB HID and an optional Modbus RTU interface for direct PLC or SCADA connections. These features mean measured values can be collected, stored and analysed without manual transcription, improving documentation speed and lowering the chance of human error. Robust design that endures shop-floor conditions The tool features a CNC‑machined aluminium housing and an IP65 rating, making it resistant to dust and splash exposure typical in production areas. A friction ratchet and a rotating measuring spindle ensure consistent contact force and reliable readings over thousands of cycles. The measuring faces comprise both point and flat geometries (0.75 × 6.5 mm) to suit a range of crimp profiles, while the solid construction reduces thermal and mechanical drift. Practical handling and measurement workflow As a compact instrument in the micro class (measuring range 0–20 mm), it offers excellent stiffness and tactile control for fine work at the bench while still providing enough range for most crimping applications. The integrated memory manager supports folder organisation and statistics mode, enabling quick batch checks and trend tracking. A formula and temperature‑correction function allow compensating measurements where environmental influences are relevant, simplifying everyday use for operators and inspectors. Contact Metav Werkzeuge today for a specification match or to arrange a technical consultation on how this Microtech instrument fits into existing measurement processes. Technical Data Article number: 110550258 GTIN: 4061905040887 Manufacturer: Microtech Metrology SKU: 110550258 Facts Measuring range: 0–20 mm Accuracy: 0.003 mm Resolution/reading: 0.0001 mm Display: 1.5" colour touchscreen Memory capacity: 2000 values Special features CNC-machined aluminium housing IP65 protection Wireless + USB data output (Wireless HID, USB HID, MDS app) Optional Modbus RTU (RS-485) ISO 17025 calibration certificate included (Ilac MRA) Measuring faces: point and flat 0.75 × 6.5 mm Friction ratchet Rotating measuring spindle On-line graphic, Max/Min, Go/NoGo, formula, timer, linear and temperature correction Statistics mode and folder system for measured value management FAQ What level of accuracy can be expected from this crimp-height instrument? The crimp height micrometre from Microtech Metrology achieves an accuracy of 0.003 mm, with a reading resolution of 0.0001 mm, suitable for precise crimp inspection and laboratory checks. Is the instrument ready for immediate traceable use out of the box? Yes, the device is delivered with an ISO 17025 calibration certificate, so it arrives fully calibrated and ready for traceable measurements in quality management systems. How can measured values be transferred to a PC or analysis system? Measured values can be transferred wirelessly to the MDS app (Windows, Android, iOS, macOS), via Wireless HID, USB HID, or through the optional Modbus RTU interface for direct industrial integration. Can the micrometre withstand use on a busy shop floor? The instrument's IP65 protection and CNC‑machined aluminium housing provide resistance to dust and splashes, while the friction ratchet ensures consistent contact force for repeatable readings in production environments. What types of crimp profiles can be measured with this micrometre? The tool includes both point and flat measuring faces (0.75 × 6.5 mm), allowing measurement of a wide range of crimp geometries commonly found in cable, terminal and connector production. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20–25mm Digital Three-Point Internal Micrometer, Carbide Measuring Faces, IP65, Setting Ring, Case - Metav IndustryLine
Take advantage of precise internal bore measurement, robust shop-floor protection and convenient digital output to speed inspection cycles. With a three-point measuring system, IP65 protection and carbide measuring faces, this instrument delivers repeatable results for small bores; order supply or contact the Metav Werkzeuge consultants for advice and delivery arrangements. Digital three-point internal micrometer M312.235.PN — 20–25 mm, IP65, carbide faces (Metav IndustryLine) The Digital three-point internal micrometer M312.235.PN is a compact, workshop-ready measuring instrument for reliable internal diameter checks of bores and blind holes in the 20–25 mm range. Digital three-point internal measuring system IP65 protection for workshop use Carbide measuring faces for wear resistance Includes setting ring and extension Micron-level accuracy for small bores The three-point design ensures concentric contact and minimal alignment error, delivering a stated accuracy of 0.005 mm (5 µm). This level of precision makes the instrument suitable for validation tasks where repeatability matters; the geometry of the three jaws stabilises the measurement in short bores and is specifically optimised for blind holes. The combination of close-range measuring geometry and hardened carbide faces reduces wear and preserves the calibration baseline over many cycles. Durable construction for shop-floor reliability Built to withstand everyday use, the micrometer features IP65 protection to resist dust and splashes, allowing measurement close to machining processes without risking the electronics. Compliance with DIN 863 underlines the mechanical design and inspection traceability. The robust frame and the wear-resistant measuring faces provide an economic balance between durability and handling comfort in production and quality-control environments. Fast results and seamless data transfer The instrument's digital display offers ON/PRESET, mm/inch and HOLD functions for quick readout and operator convenience; measurements can be exported via the RB 6 data output for SPC or inspection reporting. A supplied setting ring simplifies zeroing and verification before a measurement run, while the included extension enhances reach for deeper or awkward bores. These features reduce cycle time and enable direct integration into inspection routines. Practical accessories and suited applications Delivered with a setting ring and an extension (150×Ø15.8), the micrometer is ready for immediate use in workshop, toolroom and incoming inspection roles. Its compact measuring range and precise behaviour make it an excellent choice for small-component manufacturers, tooling shops and laboratories that require repeatable bore checks without complex fixturing. The balanced weight and ergonomic handling support frequent sampling during production control. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine digital three-point internal micrometer M312.235.PN can be integrated into inspection workflows and supplied from Emmerich with tailored accessory options. Technical Data SKU: M312.235.PN GTIN: 4054469179117 Brand: Metav IndustryLine ECLASS: 21170335 ETIM: EC003590 Norm: DIN 863 Facts Measuring range: 20–25 mm Accuracy: 0.005 mm Weight: 1 kg IP protection: IP65 Setting ring: 25 Extension: 150×Ø15.8 Zolltarifnummer: 90173000 Special features Carbide (HM) measuring faces Digital display with ON/PRESET, mm/inch and HOLD Data output: RB 6 Suitable for blind-hole measurement Includes setting ring and extension Designed for workshop and inspection use FAQ What makes the three-point design better for internal measurements? The three-point mechanism of the M312.235.PN ensures stable contact around the bore circumference, reducing eccentricity and improving repeatability compared with two-point probes, which helps achieve the stated accuracy of 0.005 mm. Can the instrument measure blind holes and through-holes? Yes. The Metav IndustryLine digital three-point internal micrometer M312.235.PN is suitable for both blind-hole measurement and standard internal checks within its 20–25 mm range. How is the instrument zeroed and prepared for measurement? A dedicated setting ring is supplied for quick calibration; the digital display supports ON/PRESET functions so verification can be completed rapidly before inspection runs. Is there a way to export measured values to a PC or SPC system? Measurement data from this micrometer can be output via the RB 6 interface, allowing integration with data collection systems and inspection software. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20–25mm Three-Point Internal Micrometer 0.001mm Resolution With Setting Ring And Extension, In Case - Metav IndustryLine
Take advantage of the combination of 1 µm resolution, three‑point internal measurement and a supplied 25 mm setting ring with extension for reliable inspection of blind bores; order directly via Metav Werkzeuge or consult its specialists for integration into existing QA routines. Three‑point internal micrometer, 20–25 mm × 0.001 mm (Metav IndustryLine) A Three‑point internal micrometer, 20–25 mm × 0.001 mm designed for precise measurement of blind-hole bores in production and inspection environments Three‑point measurement for blind-hole bores 0.001 mm (1 µm) resolution Accuracy ±0.005 mm for reliable QA Matt chrome‑plated scale and vernier High-resolution measuring for tight tolerances The instrument delivers a 0.001 mm (1 µm) resolution, enabling assessments that meet tight tolerance requirements in toolmaking and quality control. With a stated accuracy of ±0.005 mm, the three‑point contact system provides repeatable readings when checking blind holes where conventional gauges cannot reach. The fine graduations and clear vernier markings, supplied on a matt chrome‑plated scale, ensure legible, rapid readings even under bright workshop lighting. This combination of resolution and stability supports fast decision-making in production. Robust contact design for repeatable results A three‑point measuring arrangement centres the measuring contacts automatically inside the bore, reducing alignment errors and offering stable seating in blind-hole bores. The unit features hardened measuring faces, which resist wear and preserve measurement integrity over repeated cycles. The measuring frame and vernier are finished with a durable, matt chrome coating that minimises glare and mechanical wear. Together, these attributes make the instrument a practical choice for routine inspections where repeatability is essential. Ready for in-process use and calibration control The micrometer is supplied with a 25 mm setting ring to establish a verified reference quickly and an extension (152.4 × Ø15.8 mm) for deeper or recessed bores, extending the instrument’s usable reach without compromising accuracy. The setting ring allows simple on-site verification of the instrument’s zero point before critical runs, supporting traceable measurement routines in workshop and shop‑floor environments. Lightweight handling and ergonomic control help maintain consistent measuring force for reliable results. Where this instrument adds value Ideal for inspection of blind bores in fixtures, housings and assembled components, the three‑point micrometer is particularly useful in maintenance workshops and production lines that require fast yet accurate internal checks. The design reduces setup time compared with certain comparative measuring methods and fits neatly into established calibration and quality assurance cycles. Combined with Metav’s supply and technical advice, the instrument supports a pragmatic approach to improving measurement certainty across the shop floor. Contact Metav Werkzeuge to discuss how the Metav IndustryLine three‑point internal micrometer (M312.435) can be integrated into inspection plans or to request a tailored quotation from Metav Werkzeuge Technical data Article number: M312.435 GTIN: 4054469182179 Manufacturer: Metav IndustryLine Facts Measuring range: 20–25 mm Resolution: 0.001 mm (1 µm) Accuracy: ±0.005 mm Weight: 1.2 kg Special features Intended for blind-hole bores Hardened measuring faces Scale and vernier matt chrome‑plated Includes setting ring Ø25 mm Extension: 152.4 x Ø15.8 mm FAQ What is the measuring range and resolution of the instrument? The three‑point internal micrometer covers 20–25 mm with a 0.001 mm (1 µm) resolution and a stated accuracy of ±0.005 mm, suitable for fine internal inspections. How does the three‑point principle help with blind-hole measurement? The three‑point contact system centres automatically in the bore, reducing misalignment and providing stable seating for repeatable readings with the Metav IndustryLine three‑point internal micrometer (M312.435). Are the measuring faces durable for regular workshop use? Yes, the instrument is fitted with hardened measuring faces, which resist wear and help maintain measurement consistency across repeated checks. What accessories are supplied for calibration and deeper bores? The instrument includes a 25 mm setting ring for quick reference checks and an extension (152.4 × Ø15.8 mm) to reach deeper or recessed blind holes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20–25mm Three-Point Internal Micrometer With Carbide Measuring Faces, Setting Ring, Packed Case - Metav IndustryLine
Take advantage of a compact measuring instrument that combines three-point contact stability, carbide measuring faces and mechanical accuracy of ±0.005 mm to improve repeatability in small-bore inspection. Order the item directly via Metav Werkzeuge or consult our specialists for application advice. M312.135 — Three-point internal measuring micrometer, 20–25 mm range, carbide faces (Metav IndustryLine) The M312.135 is a precision three-point internal measuring micrometer for reliable measurement of small bores and blind holes in workshops and inspection benches Three-point contact for stable internal measurement Carbide measuring faces for long wear resistance Accuracy ±0.005 mm for fine mechanical control Consistent internal measurement where it matters most This three-point internal measuring micrometer delivers stable contact by engaging three symmetrically arranged anvils, which reduces tilting and improves centring in cylindrical bores. The instrument’s three-point contact principle converts small angular misalignments into repeatable radial readings, making it particularly suitable for internal diameters between 20 and 25 mm. For workshop environments that demand reliable checks rather than optical inspection, this mechanical solution offers a compact alternative with straightforward handling and predictable results. Durable contact surfaces and a serviceable scale The measuring faces are made of carbide, which increases resistance to abrasion and preserves measurement geometry over repeated cycles. The scale and vernier are matt chrome-plated, reducing glare and providing a robust reading surface for analogue use. With a certified mechanical resolution and a verified accuracy of ±0.005 mm, the instrument maintains performance for routine quality-control rounds and set-up tasks. Regular light maintenance—cleaning and lubrication of the spindle and anvils—keeps the device within its specified tolerance window. Compact classification and typical applications Classified as a Micro instrument (measuring range up to 100 mm), this micrometer is optimised for fine mechanical work such as small-bore components, watch and micro-assembly, and test fixtures. It is designed for internal measurements including blind bores, where the three-point system and the adjusting ring ensure secure contact even when access is limited. The tool is compliant with DIN 863, aligning it with familiar workshop standards and enabling straightforward integration into existing inspection routines. Speak with Metav Werkzeuge for tailored application advice and secure the M312.135 for precise internal measurements from our Emmerich quality hub Technical Data Article number: M312.135 GTIN: 4054469119489 EClass: 21170335 ETIM: EC003590 Category: Measuring micrometers (three-point internal) Core data Measuring range: 20–25 mm Minimum measuring range: 20 mm Maximum measuring range: 25 mm Accuracy: 0.005 mm Readout: analogue vernier Length: 90 mm Adjusting ring: 25 Standard: DIN 863 Materials and features Scale and vernier matt chrome-plated Carbide measuring faces Suitable for blind-hole (sack) measurements Four-digit numeric identifiers and category mapping included FAQ How does the three-point contact improve measurement reliability? The three-point contact design ensures the anvils centre within the bore and minimise tilt; the M312.135 uses this geometry to produce repeatable radial readings for small internal diameters. Can this micrometer measure blind bores? Yes, the instrument is suitable for blind-hole measurement and includes an adjusting ring to adapt the contact geometry for such applications. What accuracy can be expected during routine checks? The internal measuring micrometer provides an accuracy of ±0.005 mm when used under normal workshop conditions and maintained as recommended. Is the scale corrosion-resistant and easy to read? The matt chrome-plated scale and vernier reduce reflection and offer a durable reading surface suited to analogue inspection workflows. Which standard does the device comply with? The instrument is manufactured to meet DIN 863, aligning it with common mechanical measuring norms. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20–30mm Three-Point Digital Internal Gauge, Two Heads, HM Measuring Faces, IP65, With Setting Ring And Extension - Metav IndustryLine
Take advantage of the combination of high-resolution 0.001 mm reading, carbide measuring faces and IP65 protection for reproducible bore checks in production and inspection. Benefit from the included setting ring and extension for fast calibration and flexible reach; order the M312.286.PN directly via Metav Werkzeuge or ask our consultants if needed. M312.286.PN Digital three-point bore gauge — 20–30 mm range, IP65, carbide faces (Metav IndustryLine) The M312.286.PN is a compact digital three-point internal measuring instrument designed for precise measurement of bores and blind holes in the 20–30 mm range, combining a digital display with two measuring heads for rapid, repeatable checks in machine shops and quality control environments. Digital display with dual measuring heads Carbide measuring faces for wear resistance IP65 protection against dust and water Resolution 0.001 mm, accuracy ±0.005 mm Precise bore measurements with industrial-grade resolution The instrument delivers a resolution of 0.001 mm together with a stated accuracy of 0.005 mm, which translates into highly reliable dimensional checks for small bores. The three-point measuring principle stabilises contact with the bore and reduces eccentricity errors, while the two measuring heads on the digital readout speed up repeated measurements. These characteristics make the gauge suitable for consistent quality control where dimensional tolerances are tight and measurement throughput matters. Built to withstand workshop conditions and retain calibration Robust construction and carbide measuring faces ensure long service life even under frequent use, while IP65 ingress protection guards the electronics against dust and splashing coolant. Compliance with DIN 863 provides a familiar standard framework for workshop use. Together, these features reduce maintenance intervals and preserve measurement reproducibility, making the device a dependable tool for production floors and inspection benches alike. Ergonomics, calibration and data handling for efficient processes The instrument’s digital display offers ON/PRESET, mm/inch switching and HOLD functions to simplify data capture; a standard RB 6 data output allows integration with reading systems or SPC workflows where required. The supplied setting ring (Ø 25 mm) and an extension improve calibration and access to recessed features, enabling faster set-up and fewer interruptions in routine inspection tasks. The combination of clear readout and practical accessories reduces cycle time per measurement. Applications, compatibility and the added reassurance of Metav support Designed for both through and blind-hole measurement, the gauge suits precision tasks in toolmaking, component inspection and small-bore production. The inclusion of hardened contact faces and a compact measuring depth of 90 mm facilitates checks in confined geometries. When combined with Metav’s logistics and product vetting, the instrument supports a dependable supply chain for workshops seeking consistent quality and traceability. For dependable bore measurement solutions from Metav IndustryLine, contact Metav Werkzeuge to arrange supply of the M312.286.PN or to discuss suitability for specific applications — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M312.286.PN GTIN: 4054469179278 Category: Micrometers Facts Measuring range: 20–30 mm (20–25 + 25–30) Resolution: 0.001 mm Accuracy: 0.005 mm Measuring depth: 90 mm Weight: 1.8 kg Setting ring diameter: 25 mm Extension length: 150 mm Tariff number: 90173000 Special features IP65 protection Carbide measuring faces (HM) Digital display with ON/PRESET, mm/inch and HOLD functions Two measuring heads on the display Suitable for blind-hole measurement Includes setting ring and extension Conforms to DIN 863 Data output: RB 6 FAQ What measurement accuracy can be expected from this instrument? The M312.286.PN achieves an accuracy of 0.005 mm with a display resolution of 0.001 mm, suitable for fine quality-control tasks and production checks. Can the gauge measure blind holes and through holes? Yes, the design is suitable for both blind-hole measurement and standard bore checks, with an effective measuring depth of 90 mm. Is the device protected against workshop contaminants? The unit is IP65-rated, offering protection against dust ingress and water jets, making it robust for industrial environments. What accessories are supplied for calibration and extended reach? The delivery includes a setting ring (Ø 25 mm) and an extension of 150 mm to assist calibration and measurement in recessed bores. How can measurement data be exported for traceability or SPC? The instrument provides an RB 6 data output for connection to compatible data-collection systems and process-control workflows. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20–35mm Three-Point External Micrometer 0.01mm Reading Carbide Faces Ratchet, Supplied in Case - Metav IndustryLine
Combine carbide measuring faces, a fine 0.01 mm reading and a ratchet stop to secure reproducible results on non‑round profiles; ideal where repeatable, high‑accuracy external measurements are required. Order the Metav IndustryLine M309.022 directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine M309.022 — 3‑Point External Micrometer (20–35 mm, 0.01 mm) The Metav IndustryLine M309.022 is a three‑point external micrometer designed for precise measurement of triangular and five‑sided components in fine mechanical and workshop environments. *Carbide measuring faces for long service life *0.01 mm reading with 0.006 mm accuracy *Ratchet stop ensures consistent measuring force *Designed for triangular and five‑sided profiles Exact measurement for non‑round profiles Three‑point measurement geometry converts irregular edges into a single, reproducible diameter value, making this instrument especially suited for triangular or pentagonal workpieces. The device offers a measuring range of 20–35 mm, placing it in the Mikro category (micro range for up to 100 mm) where stiffness and short anvils are advantages. The analogue scale provides a 0.01 mm reading while the verified measuring performance lists an accuracy of 0.006 mm, so inspection routines benefit from both clear readability and fine resolution. The integrated ratchet stop helps to apply a uniform measuring force, reducing operator‑related scatter. Built for workshop durability and repeatability The micrometer combines a lacquered frame with a matt‑chromed measuring drum, balancing corrosion resistance and low glare for consistent reading under workshop lighting. Carbide measuring faces resist wear from repeated contact with hard materials, extending service life and maintaining measurement integrity over time. The ergonomic frame and tactile ratchet give repeatable handling for series checks, supporting efficient quality control in small‑batch production or repair work without complex setup. Straightforward integration into inspection processes As a mechanical, analogue instrument, this micrometer is quick to deploy for routine checks and on‑the‑bench inspections. A 20 mm setting datum is available for reference during zeroing or comparative checks, which simplifies daily calibration routines. Its function is complementary to digital micrometres where traceable electronic output is required; here the emphasis is on robust, low‑maintenance performance and reproducible readings of non‑cylindrical profiles. The construction and materials suit use across general metalworking and fine mechanics where three‑point external measurement is the preferred method. Choose the Metav IndustryLine M309.022 for reliable three‑point external measurements and contact Metav Werkzeuge in Emmerich for tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M309.022 GTIN: 4054469117577 eClass: 21170328 ETIM: EC003590 Core specifications Measuring range: 20–35 mm Resolution / reading: 0.01 mm Stated accuracy: 0.006 mm Setting datum: 20 mm Instrument type: analogue / mechanical Materials & features Frame: lacquered Measuring drum: matt‑chrome plated Measuring faces: carbide (hardmetal) Ratchet stop for constant measuring force Suitable for triangular and five‑sided profiles Tariff code: 90173000 FAQ What kinds of components is this micrometer intended for? The Metav IndustryLine M309.022 three‑point external micrometer is intended for triangular and five‑sided workpieces where a single reproducible external dimension is required. What is the measuring range and reading capability? The instrument covers 20–35 mm with an analogue reading of 0.01 mm and a stated accuracy of 0.006 mm. Does the micrometer use wear‑resistant contacts? Yes, the measuring faces are made of carbide to ensure long service life and stable measurements under frequent use. How does the ratchet stop improve measurement consistency? The ratchet stop limits the applied torque so that each measurement is made with a consistent contact force, reducing variability between operators. Can this micrometer be used in standard workshop inspection routines? Its robust construction, simple analogue operation and three‑point geometry make it suitable for routine workshop checks and small‑batch quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20–50mm Digital Three-Point Internal Quick-Measure Gauge Rotating 330° Display, RB6/Bluetooth, Plastic Case - Metav IndustryLine
The combination of high repeatability (±0.005 mm), a rotatable 330° display and Bluetooth/RB 6 data output ensures rapid, traceable internal measurements for production and quality control. Order the set directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Digital Three‑Point Internal Quick Measuring Gauge Set M312.346 – 20–50 mm range, Bluetooth data output The Digital Three‑Point Internal Quick Measuring Gauge Set M312.346 is a compact, pistol‑style set for fast internal dimension checks in blind holes and bores across the 20–50 mm band. Rotatable 330° display for flexible reading Bluetooth and RB 6 data output for traceable capture High repeatability: ±0.005 mm accuracy Four pistol‑style three‑point gauges in a transport case Rapid, repeatable internal measurements that speed inspection The set delivers fast comparative readings thanks to its three‑point measuring principle, which centres the probe heads automatically in a bore and reduces positioning variability compared with single‑point methods. This design shortens cycle times in routine checks and calibration runs while maintaining high repeatability (±0.005 mm). The 20–50 mm measuring range places these instruments in the micro category, making them particularly suited to precision work on small components, where the short legs preserve stiffness and reduce measurement error. Reliable accuracy combined with modern data capture A clear benefit for production environments is the combination of fine resolution and digital connectivity. The instruments provide a resolution of 0.001 mm on the display and offer Bluetooth plus RB 6 data output for direct transfer into inspection software or data loggers. The display is rotatable by 330°, enabling ergonomic reading in confined fixturing, and the control panel includes ON/OFF, SET, CAL, INC, PRESET, HOLD, mm/inch and TOL keys for versatile setup and tolerancing. Power is supplied by a 3 V CR2032 battery, keeping maintenance straightforward. Workshop‑ready kit for blind‑hole inspection and routine QA The delivery comprises four pistol‑style digital three‑point gauges (setting ring and extension not included) presented in a protective transport case, allowing controlled storage and safe transfer between workstations. The set is optimised for blind‑hole measurements, where the three‑point geometry ensures consistent contact and repeatable centring even in short or stepped bores. The compact format and integrated data output simplify integration into existing quality workflows for machine shops, tool rooms and inspection stations. Contact Metav Werkzeuge for tailored advice and to request a specification sheet or a quotation for the M312.346 set with Bluetooth/RB 6 connectivity Technical data Article number: M312.346 GTIN: 4054469181684 Weight: 2.39 kg Content: 4x digital pistol three‑point quick gauges (setting ring and extension not included) Battery: 3 V CR 2032 Numbers / Core technical data Measuring range: 20–50 mm Resolution: 0.001 mm Repeatability / accuracy: ±0.005 mm Pieces per set: 4 Special features / Versions Digital display with ON/OFF/SET, CAL, INC, PRESET, HOLD, mm/inch and TOL functions Display rotatable by 330° Data output: RB 6 and Bluetooth Suited for blind‑hole measurements Delivered in a transport case FAQ What measurement tasks are these gauges best for? The M312.346 set is optimised for internal measurements, especially blind‑hole bores, where the three‑point contact ensures centring and rapid, repeatable readings. How is measurement data transferred from the gauges? Data can be exported via Bluetooth or the RB 6 interface for direct capture into inspection software or data loggers, enabling traceable documentation of results. What accuracy and resolution can be expected? The gauges provide a resolution of 0.001 mm and a repeatability/accuracy of ±0.005 mm, suitable for high‑precision workshop and production checks. Are setting rings or extensions included? The delivery contains four digital three‑point gauges; a setting ring and any extensions are not included and must be ordered separately if required. How is the set supplied for transport and storage? The instruments are supplied in a protective transport case to secure the gauges during storage and transfer between workstations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2200-2400mm Bench Micrometer Sub‑Micron Digital Touchscreen, ISO17025 Calibrated, Wireless/USB - Microtech Metrology
Take advantage of the extra‑long 2,200–2,400 mm measuring range, wireless and USB data transfer, and the included ISO 17025 calibration certificate for reliable, traceable inspection of large components. Order the frame micrometer directly via Metav Werkzeuge or ask our consultants for tailored advice. Frame micrometer 2,200–2,400 mm by Microtech Metrology — extra‑long digital micrometer with wireless data output The frame micrometer is an extra‑long, digitally read micrometer designed for large‑format dimensional checks in heavy machining, vessel and pipe work, and large tooling assemblies. Extra‑long 2,200–2,400 mm measuring range Wireless and USB data output for Industry 4.0 workflows ISO 17025 calibration certificate included CNC‑machined aluminium housing for high stiffness Reproducible measurement across large components This instrument addresses the specific challenge of measuring large workpieces: an extra‑long 2,200–2,400 mm measuring range paired with substantial frame stiffness reduces deflection over the span and improves repeatability when compared with improvised methods. The large Ø50 mm measuring faces distribute contact forces reliably and the substantial mass of the assembly (approx. 27 kg) stabilises the tool during a measurement cycle. Classified as an extra‑long micrometer, it is intended where long‑span accuracy matters — for example in heavy machining, pipe fabrication or large jig and fixture inspection — offering a consistent reading method that replaces less repeatable tape or gauge approaches. Digital connectivity that fits modern inspection chains Data handling is engineered for productivity: the instrument provides wireless and USB HID transfer modes, a dedicated Memory Manager with 2,000 values, and multiple data modes such as 2D graphing, probe mode and on‑line graphic display. These functions enable direct integration into measurement workflows and statistical traceability, reducing manual transcription errors and accelerating reporting. An optional MODBUS RTU interface (RS‑485) is available for plant‑level integration where real‑time PLC connectivity is required, while the local colour touchscreen display shows readings clearly at the point of inspection. Traceable calibration and robust mechanical design Delivered fully calibrated with an ISO 17025 calibration certificate (Ilac MRA), the micrometer includes traceable documentation for formal quality systems and audit trails. The CNC‑machined solid aluminium housing provides mechanical integrity and thermal stability; combined with the device’s specified accuracy (0.036 mm) and measurable resolution (0.0001 mm), the unit balances long‑range capability with practical inspection accuracy suitable for heavy‑duty use. The included calibration certificate ensures measurement results are auditable and accepted by quality departments. Practical deployment and workshop integration As a purpose‑built solution for large parts, the instrument arrives ready for immediate integration: predefined data transfer modes support Windows, Android, iOS and macOS applications and allow stand‑alone logging or networked collection. The device’s feature set — including go/no‑go, max/min, linear and temperature correction — simplifies routine checks and reduces setup time for recurring inspections. For workshops seeking reliable throughput with documented traceability, this micrometer forms a strong, service‑ready basis for regular production checks and incoming inspection. Contact Metav Werkzeuge today to discuss specification matching, delivery options from Emmerich and to arrange documentation for your quality system requirements Technical Data Article number: 110182408 GTIN: 4061905039928 Manufacturer: Microtech Metrology Measuring range: 2,200–2,400 mm Measuring faces: Ø50 mm Data output: Wireless + USB Display: Colour 1.5" touchscreen Calibration: ISO 17025 certificate included Facts Weight: 27 kg Resolution (display): 0.0001 mm Stated accuracy: 0.036 mm Memory: 2,000 values SKU: 110182408 ECLASS: 21170328 Special features Wireless MICROTECH instrument connection and synchronization MICS system with sub‑micron support and on‑line graphics 2D mode, 2D graph, probe mode and compensation features Memory manager with folders and statistics mode Optional MODBUS RTU (RS‑485) for industrial connections CNC‑machined solid block aluminium housing Functions: Go/NoGo, Max/Min, Formula, Timer, Linear and Temperature correction FAQ What is the exact measuring range of the micrometer? The frame micrometer supports a measuring range from 2,200 mm to 2,400 mm, making it suitable for extra‑long measurements of large components. Is the instrument supplied calibrated for formal quality systems? Yes — the micrometer is delivered with a full ISO 17025 calibration certificate, providing traceability and audit‑ready documentation from Microtech Metrology. How can measurement data be transferred to inspection software? Data can be transferred wirelessly or via USB HID, with four data transfer modes available and compatibility with Windows, Android, iOS and macOS systems; an optional MODBUS RTU output supports PLC integration. What level of resolution and accuracy does the device provide? The display resolution is 0.0001 mm; the stated instrument accuracy is 0.036 mm, which reflects the compromise between long‑range capability and repeatable field measurements for large parts. Is the micrometer suitable for industrial, continuous use? Yes — the robust CNC‑machined aluminium housing, large contact faces and integrated data management make this instrument suitable for workshop and production‑line inspection of large assemblies. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2200-2400mm Digital Micrometer Caliper With Friction Ratchet, IP65, ISO 17025 Calibrated - Microtech Metrology
Benefit from a combination of wide-range measurement capability, IP65-rated digital electronics and an ISO 17025 calibration certificate to ensure reliable, traceable measurements across large components; order the instrument directly via Metav Werkzeuge or consult our specialists for advice. Microtech Metrology digital micrometer — Extra‑Long range with IP65 protection Microtech Metrology digital micrometer for heavy‑duty workshop and production measurements in large assemblies Wide measurement range for large components IP65-rated digital head for workshop use Includes setting rods and ratchet stop Supplied with ISO 17025 calibration certificate Accurate measurement over long spans for production control This instrument is designed for reproducible assessment of large components, covering a measuring span of 2,200–2,400 mm classified as Extra‑Long. The substantial mass of the gauge (27 kg) and robust measuring faces Ø50 mm increase profile stiffness and decrease bending under load, resulting in stable readings across the full travel. For production and quality control environments where repeatability over metres matters, the construction reduces measurement uncertainty and simplifies alignment of large shafts, housings or fixtures. Digital clarity and environmental robustness for workshop use Equipped with a digital readout at 0.001 mm resolution and an IP65-rated measuring head, the instrument combines fine resolution with protection against dust and jets of water. The integrated ratchet stop and supplied setting rods help control measuring force and guarantee consistent contact pressure, lowering operator influence on results. The electronic display accelerates readout and data capture, while the rugged sealing allows use in common shop-floor conditions without compromising instrument lifetime. Traceable calibration and measurable confidence in QA workflows Delivered with an ISO 17025 calibration certificate, the device supports formal traceability and audit requirements; the included certificate documents measurement performance and enables direct integration into quality management systems. The declared accuracy of 0.045 mm establishes the instrument's suitability for end‑of‑line checks and component verification. As a digital, wide‑range measuring tool from Microtech Metrology, it bridges the gap between laboratory traceability and on‑shop practicality, reducing rework and inspection bottlenecks. For precision over very long measuring ranges, request a specification review or place an order with Metav Werkzeuge — Metav Werkzeuge provides product advice and supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 110172401 GTIN: 4061905039447 Manufacturer: Microtech Metrology Weight: 27 kg IP rating: IP65 Resolution: 0.001 mm Accuracy: 0.045 mm Measuring faces: Ø50 mm Facts Measuring range: 2,200–2,400 mm Resolution (display): 0.001 mm Declared accuracy: 0.045 mm Mass: 27 kg Special features Digital display Ratchet stop Setting rods included Supplied with ISO 17025 calibration certificate IP65 protection Wide‑range micrometer for large components FAQ What measuring range does this micrometer cover? The Microtech Metrology digital micrometer covers a measuring span of 2,200–2,400 mm and is intended for extra‑long measurement tasks (SKU 110172401). Is the device suitable for shop‑floor use? Yes, the instrument features an IP65‑rated digital head and robust measuring faces, making the micrometer suitable for typical workshop environments. Does the micrometer come calibrated? A calibration certificate is supplied; the micrometer is delivered with an ISO 17025 calibration certificate confirming traceable verification. What resolution and declared accuracy can be expected? The digital readout provides 0.001 mm resolution and a declared accuracy of 0.045 mm for the specified measuring range. Are any accessories included for installation or setup? Setting rods and a ratchet stop are included to assist correct measuring force and initial adjustment of the micrometer. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
225 mm Setting Gauge For Micrometers With Thermal Insulation, Accuracy ±3.5 µm - Metav IndustryLine
Take advantage of a compact, laboratory-grade reference that combines high reproducibility and temperature compensation for reliable micrometer setup. The 225 mm nominal length and ±0.0035 mm accuracy (≈ 3.5 µm) ensure consistent calibration of outside micrometers, while integrated thermal protection reduces measurement drift during routine use — order via Metav Werkzeuge or contact the technical consultants for application advice. Setting gauge for micrometers M304.317 — 225 mm reference gauge, ±0.0035 mm accuracy, Metav IndustryLine The Setting Gauge for Micrometers M304.317 is a precision reference bar intended for setting and checking outside-measuring micrometers in workshops and metrology labs, offering a stable 225 mm reference with flat measuring faces for repeatable results 225 mm nominal length ±0.0035 mm accuracy Flat measuring faces Integrated thermal protection Reliable reference for precise micrometre calibration A solid reference bar delivers the foundation for repeatable measurements. The compact reference offers a 225 mm nominal length combined with ±0.0035 mm declared accuracy, which corresponds to roughly 3.5 µm. This level of precision reduces setup uncertainty when adjusting outside micrometres and supports consistent part inspection. The flat measuring faces minimise contact variability, making the standard well suited to both workshop and laboratory environments where reproducibility matters. Temperature stability that preserves measurement integrity Thermal effects are a common source of error in length standards. The supplied item features thermal protection, which mitigates short-term temperature influences during handling and brief exposure to ambient changes. Reduced thermal drift means fewer false rejections and less rework, improving throughput in calibration routines. For everyday calibration tasks this stabilising function directly translates into lower process variance and more reliable traceability chains. Compact design for routine use and easy handling Weighing 0.3 kg, the reference is easy to position and manipulate on a workbench or within a calibration jig without compromising stiffness. The flat measuring faces provide a clear seating surface for outside micrometres, simplifying alignment and reducing operator-induced error. As an accessory-class reference, the gauge integrates smoothly into existing metrology workflows and complements laboratory standards by offering a practical compromise between range and handling convenience. For consistent metrology results and practical workshop calibration, contact Metav Werkzeuge to secure the Metav IndustryLine setting gauge M304.317 and discuss suitability for specific micrometre families Technical Data Article number: M304.317 GTIN: 4054469116686 Manufacturer: Metav IndustryLine Facts Nominal size: 225 mm Accuracy: ±0.0035 mm (≈ 3.5 µm) Diameter: 8 mm Weight: 0.3 kg Tariff number: 90173000 Special features Measuring faces: flat Thermal protection included Category: Accessories (metrology) FAQ How precise is the setting gauge for routine calibration tasks? The setting gauge M304.317 offers a declared accuracy of ±0.0035 mm (about 3.5 µm), suitable for high-precision workshop and laboratory checks of outside micrometres. Can this reference be used with all outside micrometres? The reference bar is intended for setting and checking outside-measuring micrometres; compatibility depends on the anvil geometry of the micrometre, but the flat measuring faces support standard contact geometries. Does the thermal protection eliminate the need for temperature-controlled rooms? Thermal protection reduces short-term drift and handling effects, improving stability during use; for highest-accuracy traceable calibrations, a controlled environment remains best practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com