Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
175 mm Setting Gauge For Micrometer, Accuracy ±0.003 mm, Diameter 8 mm, Thermal Protection - Metav IndustryLine
Taking advantage of a 175 mm reference length combined with ±0.003 mm accuracy and integrated thermal protection ensures reliable, repeatable micrometer settings—order this dimensionally stable setting gauge directly via Metav Werkzeuge or contact the consultancy team for specification assistance. M304.315 Setting Gauge for Micrometers — 175 mm, ±0.003 mm accuracy, Metav IndustryLine M304.315 Setting Gauge for Micrometers is a precision reference standard for setting external micrometers in workshop and calibration environments, designed for routine measurement setup and quality control tasks. 175 mm reference length ±0.003 mm measurement accuracy Thermal protection for stability Flat measuring faces for repeatability Consistent precision for reliable setups As a workshop-grade reference, this setting gauge delivers ±0.003 mm (3 µm) accuracy across its 175 mm nominal length, enabling reproducible micrometer adjustments and reducing setup variability. The fine tolerance makes it suitable where small errors accumulate into significant production deviations; the gauge serves as a fixed, traceable reference that standardises external micrometer readings and shortens inspection cycles while preserving measurement integrity. Designed for practical handling and repeatability The lightweight construction (approx. 0.2 kg) and compact geometry support frequent use on the shop floor and in inspection benches. Flat measuring faces guarantee stable contact conditions and minimise rocking during setting operations, while the shaft dimension D = 8 mm fits common holder or support fixtures. Clear, straightforward geometry means calibration checks and adjustments are completed faster, improving throughput without sacrificing measurement quality. Built to resist thermal influence for stable readings Equipped with thermal protection, the gauge reduces the influence of ambient temperature shifts on dimensional stability during typical workshop workflows. This design feature curbs thermally induced measurement drift so that reference values remain trustworthy over typical operation periods, which in turn supports consistent pass/fail decisions and fewer repeat measurements in quality control routines. Integrates smoothly into inspection and production workflows As an accessory-class instrument, the gauge is intended to be a dependable setting standard alongside external micrometers and calibration equipment. Its compact form factor and stable reference surface make it suitable for bench use, measuring stations and mobile inspection setups. The product complements Metav IndustryLine’s broader offering of precision tools and helps consolidate reliable measurement resources within a single supplier framework. For application advice or to request delivery options for the Metav IndustryLine M304.315 setting gauge, contact Metav Werkzeuge in Emmerich — technical consultants are available to discuss compatibility with existing measurement equipment and workshop requirements. Technical data Article number: M304.315 GTIN: 4054469116662 Customs tariff number: 90173000 Brand: Metav IndustryLine Facts Nominal length: 175 mm Accuracy: ±0.003 mm Weight: 0.2 kg Shaft diameter: D = 8 mm Special features Measuring faces: flat Thermal protection included Category: accessory for micrometers Application: reference standard for setting external micrometers FAQ Is this setting gauge suitable for routine micrometer adjustment? The M304.315 setting gauge from Metav IndustryLine is intended precisely for routine adjustment of external micrometers and provides a stable reference at 175 mm with ±0.003 mm accuracy. What does the stated accuracy ±0.003 mm mean in practice? An accuracy of ±0.003 mm (3 µm) indicates the dimensional tolerance of the M304.315; this level of precision supports tight setting and calibration tasks where small deviations have a measurable effect. Does the gauge require special handling because of its thermal protection? Thermal protection on the Metav IndustryLine M304.315 reduces sensitivity to ambient temperature changes, allowing normal workshop handling while improving measurement stability during use. Can the gauge be used in mobile inspection setups? Yes; with a compact form and a weight of about 0.2 kg, the M304.315 is suitable for bench and mobile inspection stations where a stable reference is needed. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200 mm Micrometer With Ratchet, Matt Chrome Thimble, Painted Frame, Supplied In Case - Metav IndustryLine
Take advantage of a robust large‑range measuring solution with a 175–200 mm measuring range, a ratchet stop for repeatable contact force and a matt‑chrome thimble for glare‑free readings; order directly via Metav Werkzeuge or ask the Metav consultants for application advice and delivery options Metav IndustryLine Outside Micrometer M304.615 — 175–200 mm, ratchet stop Metav IndustryLine Outside Micrometer M304.615 — a heavy‑duty outside micrometer for accurate external measurements on shafts, housings and large components in workshop and production environments Measuring range 175–200 mm Ratchet stop for consistent measuring force Matt‑chrome thimble for clear graduation visibility Supplied in a transport case Built for larger components and routine workshop use This outside micrometer is designed for reliable measurement of larger parts where reach and stability matter. The measuring range 175–200 mm provides the span required for shafts, flanges and housings while the robust frame construction and finish ensure the instrument remains usable in routine production settings. Conformity to DIN 863 gives a recognised standard basis for workshop quality control, supporting traceability and repeatable results. Repeatable contact force for consistent results Measuring consistency is achieved by the integrated ratchet stop, which limits operator‑applied force to a repeatable value and reduces measurement scatter. Combined with the precise spindle pitch 0.5 mm, the instrument converts each spindle revolution into predictable axial travel, so readings remain reliable across repeated checks. This feature is particularly relevant for production QA where short cycle times demand fast, reproducible measurements. Clear readings and durable finish for daily operation The matt‑chrome thimble reduces reflections and improves legibility under workshop lighting, making manual readings faster and less error‑prone. The frame painted finish protects against minor corrosion and workshop wear, while the mechanical design supports fine incremental reading via the engraved drum. With an analog design and a 0.01 mm reading step, the instrument is simple to operate and well suited to conventional measuring tasks without electronics. Practical handling and secure transport A dedicated transport case is supplied for safe storage and movement between workstations or to the inspection bench, helping to protect calibration and the measuring faces during transit. The spindle diameter and robust spindle mechanics support stable contact during hand measurement, and the ratchet mechanism contributes to reproducible clamping of the measuring faces, reducing the need for repeated rechecks and streamlining inspection workflows. For practical, workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for product availability and tailored advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 — Metav consultants will assist with selection and delivery options Technical data Article number: M304.615 GTIN: 4054469167084 Brand: Metav IndustryLine Norm: DIN 863 Type: Analog (mechanical) Category path: Messgeräte > Messschrauben Facts Measuring range: 175–200 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Reading step: 0.01 mm Features Ratchet stop for consistent measuring force Frame painted and measuring drum matt‑chrome plated Supplied in transport case Customs tariff number: 90173000 FAQ What is the measuring range of this micrometer? The measuring range is 175–200 mm for the Metav IndustryLine outside micrometer (M304.615), suitable for larger external dimensions. Does the instrument include a ratchet stop? Yes, the micrometer features a ratchet stop to ensure a consistent contact force and improved repeatability. Is the instrument supplied with a case? A transport case is included with the Metav IndustryLine outside micrometer M304.615 to protect the instrument during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Bore Gauge Micrometer With Friction Ratchet, Matt Chromium-Plated Spindle, DIN 863, Supplied In Case - Metav IndustryLine
Take advantage of a robust 175–200 mm outside micrometer that pairs a 0.01 mm graduation with a friction ratchet for reproducible contact and compliance with DIN 863; supplied in a protective case for secure transport. Order the M304.235 directly via Metav Werkzeuge or contact our advisors for specification support. M304.235 outside micrometer (175–200 mm) — friction ratchet, matt chrome-plated thimble The M304.235 outside micrometer is a precision workshop instrument for reliable external measurements across a 175–200 mm range, engineered for repeatable contact and easy handling in production and inspection environments. 175–200 mm measuring range 0.01 mm graduation for precise readings Friction ratchet for reproducible contact Matt chrome-plated measuring thimble Repeatable contact for consistent results The mechanical design focuses on measurement reproducibility: a friction ratchet determines the measuring force and prevents over-tightening, making every reading more consistent across repeated cycles. Combined with the fine 0.01 mm graduation, this behaviour reduces operator-induced variation and supports quality-control processes where traceable, repeatable external measurements are required. The construction aligns with industrial expectations, helping to shorten inspection times without compromising accuracy. Fast adjustment and clear reading mechanics A spindle pitch of 0.5 mm gives predictable axial movement per thimble rotation, which accelerates setup while preserving fine adjustment capability. The matt chrome-plated thimble improves legibility under workshop lighting and reduces surface reflections that can hinder quick readings. Built as a mechanical instrument to DIN 863, the micrometer uses established metrology principles so operators familiar with conventional micrometers will find the scale and tactile feedback immediately intuitive. Robust transport and workshop readiness Designed for everyday use in production settings, the instrument is supplied in a protective case for secure transport and storage. The solid construction of the frame and the finished thimble make it suitable for regular handling on the shop floor while the supplied case reduces the risk of accidental damage during transit. Metav’s role as a precision partner ensures dependable availability from the Emmerich hub, supporting customers who require consistent supply and clear product information for procurement and process planning. For reliable workshop-grade measurements, select the Metav IndustryLine M304.235 outside micrometer and contact Metav Werkzeuge in Emmerich for technical details or personalised ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M304.235 GTIN: 4054469167114 Standard: DIN 863 Category: Outside micrometer (micrometer) Facts Measuring range: 175–200 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm eClass: 21170328 Special features Friction ratchet for reproducible measuring force Matt chrome-plated measuring thimble Supplied in protective case for transport Mechanical (analog) micrometer, vernier-style graduation FAQ What measurement range does this micrometer cover? The M304.235 outside micrometer covers a measuring range of 175–200 mm and is intended for external diameter and thickness checks. How precise are the readings on the instrument? Readings on the M304.235 are given in 0.01 mm steps, offering standard workshop-level precision suitable for production and inspection tasks. What benefit does the friction ratchet provide? The friction ratchet on the Metav IndustryLine M304.235 ensures a controlled measuring force, improving repeatability and protecting the spindle from over-torque. Is the micrometer ready for workshop transport? Yes, the M304.235 is supplied in a protective case to secure the instrument during transport and reduce the risk of damage on the shop floor. Which standard does this micrometer comply with? The M304.235 is manufactured to conform with DIN 863, the conventional standard for mechanical micrometers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Digital Micrometer With 35mm Test Faces, Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise, certified measurement and modern data transfer: the combination of ISO 17025 calibration, Wireless + USB output and a large 175–200 mm measuring range ensures reproducible results and efficient process integration. Order the instrument directly via Metav Werkzeuge or consult our sales engineers for specification support. Micrometer (175–200 mm) by Microtech Metrology — Wireless + USB, Touchscreen Micrometer (175–200 mm) by Microtech Metrology for accurate, traceable measurements of medium-sized components in production and quality control. Wireless and USB data output Touchscreen display 1.54" ISO 17025 calibrated with certificate Large measuring range 175–200 mm Traceable precision for process-critical checks The instrument delivers reliable accuracy of ±0.008 mm, making it suitable for higher-tolerance inspection tasks and sampling in production. Supplied fully calibrated to ISO 17025, the device includes a calibration certificate, which supports audit requirements and reduces setup time for incoming inspection. With a high display resolution of 0.0001 mm, readings are fine-grained and repeatable; this combination of certified accuracy and fine resolution shortens decision loops in quality control and reduces rework. Seamless digital capture for Industry 4.0 workflows Equipped with both Wireless and USB data interfaces and a 1.54" touchscreen, the measuring instrument simplifies transfer of measurement data to SPC systems and inspection software. Wireless transfer speeds up batch sampling and reduces manual transcription errors, while USB provides a secure wired option for traceable downloads. The touchscreen enhances usability on the shop floor, allowing operators to view results and change settings without additional peripherals — improving throughput and data integrity. Measuring faces and mechanics built for larger parts The measuring faces are Teller Ø35 mm, providing a stable contact area for flanges, bearings and similar components where point contacts are unsuitable. The design feature of a non-rotating spindle reduces surface marking and ensures consistent contact geometry during measurement, which is particularly useful on finished surfaces or coated parts. Together with the 175–200 mm measuring range, these characteristics make the tool well suited to medium-sized components in assembly, tooling and maintenance applications. Robust use in production and laboratory environments The construction and digital electronics are optimised for frequent shop-floor use: the unit supports quick sampling routines and can be integrated into batch traceability processes. The combination of certified calibration and modern data output enables quality managers to document inspection chains without extra administrative steps. Operators benefit from the clear touchscreen readout and the instrument’s tactile stability, which together reduce user-related variability and accelerate routine checks. Choose the Microtech Metrology micrometer for certified, network-ready measurement; contact Metav Werkzeuge in Emmerich for ordering or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 110782007 GTIN: 4061905457517 Manufacturer: Microtech Metrology Facts Measuring range: 175–200 mm Resolution / reading: 0.0001 mm Accuracy: ±0.008 mm Display: Touchscreen 1.54" Data output: Wireless + USB Special features Measuring faces: Teller Ø35 mm Spindle: non-rotating spindle Calibration: ISO 17025 certificate included Digital instrument FAQ What is the measuring range of this micrometer and for which parts is it suitable? The micrometer measures from 175 to 200 mm and is suitable for medium-sized components such as bearings, flanges and housing elements where a large contact face is required. Is the device delivered with a calibration certificate? Yes. The instrument is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate. How are measurement results transferred to a computer system? Measurement values can be exported via Wireless connection or USB, allowing straightforward integration into SPC or inspection software. What is the display resolution and how precise are readings? The touch display shows values with a resolution of 0.0001 mm; combined with an accuracy of ±0.008 mm, this supports reliable, fine-resolution inspections. Does the spindle rotate during measurement and why does that matter? The spindle is non-rotating, which limits surface marking and preserves consistent contact geometry — beneficial for finished or coated surfaces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
175-200mm Digital Micrometer With Non-Rotating Spindle, 0.001mm Resolution, 7 Interchangeable Anvils, Supplied In Case - Metav IndustryLine
Benefit from workshop-grade accuracy and repeatable results thanks to a 0.001 mm resolution, a non-rotating measuring spindle and a ratchet stop for consistent measuring force; supplied with seven pairs of special measuring inserts to cover diverse geometries. Order the Digital Uni-Micrometer through Metav Werkzeuge or consult our advisors for specification matching and delivery options. Digital Uni-Micrometer M302.047.D — 175–200 mm, 0.001 mm resolution The Digital Uni-Micrometer is a precision external measuring instrument for workshop and inspection tasks, offering a 175–200 mm measuring range with a non-rotating spindle and digital readout for efficient data capture. Resolution 0.001 mm Non-rotating measuring spindle Seven pairs of special measuring inserts High-resolution measurement for repeatable inspection results Engineered for tasks that demand fine external measurement, this micrometer provides a resolution of 0.001 mm and a stated accuracy of 0.014 mm, delivering quantifiable improvements in process control and first-off inspection. The digital readout supports absolute and incremental modes, making comparisons, offsets and statistical sampling straightforward. The precise graduation and solid construction reduce variability between operators, so measurement uncertainty is lowered and production scrap can be controlled. Modular anvils and secure contact for varied components A set of seven pairs of special measuring inserts is supplied to adapt the instrument to different part shapes and profiles, reducing the need for multiple dedicated tools. The non-rotating measuring spindle keeps the contact geometry stable during closing, while the integrated ratchet stop ensures consistent measuring force across repetitive cycles. Together these features speed up inspection routines and minimise operator-induced error, which is especially useful in small-batch production and toolroom applications. Robust finish, ergonomic handling and digital data transfer The frame is lacquered and the measuring drum matt chromium-plated for resistance against workshop wear; the instrument weighs 1.7 kg and balances rigidity with manoeuvrability. The digital display offers ON/OFF, ABS/INC, UNIT and SET keys for quick configuration, and the RB 4.1 data output enables straightforward integration with data collection systems for quality documentation. This combination of tactile handling features and digital connectivity supports a smooth inspection workflow and traceable measurement records. For a reliable precision solution in the 175–200 mm range, choose the Metav IndustryLine Digital Uni-Micrometer and contact Metav Werkzeuge to discuss technical fit, delivery terms and accessory options. Technical Data Article number: M302.047.D GTIN: 4054469114354 eClass: 21170328 ETIM: EC003590 Customs tariff number: 90173000 Facts Measuring range: 175–200 mm Measuring spindle diameter: 6.5 mm Resolution: 0.001 mm Indicated accuracy: 0.014 mm Weight: 1.7 kg Special features Material: frame lacquered, measuring drum matt chromium-plated Digital display with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Ratchet stop for reproducible measuring force Non-rotating measuring spindle Supplied with 7 pairs of special measuring inserts Norm: Werksnorm Category: Micrometers FAQ Is the Digital Uni-Micrometer suitable for workshop use? The Digital Uni-Micrometer is designed for workshop and inspection environments, combining a robust finish and ergonomic features with a digital readout for efficient routine measurements. What accuracy and resolution can be expected? The instrument offers a resolution of 0.001 mm and a quoted accuracy of 0.014 mm, values intended to support reliable process control and repeatable inspections. Are measuring inserts included and what is their purpose? Yes. Seven pairs of special measuring inserts are included to adapt the micrometer to different workpiece profiles and to reduce the need for multiple dedicated gauges. How does the non-rotating spindle benefit measurement? A non-rotating measuring spindle stabilises contact geometry and prevents torsional influences during closure, improving repeatability across successive measurements with the Digital Uni-Micrometer. Can measurement data be transferred electronically? The micrometer features an RB 4.1 data output, enabling connection to data acquisition systems for traceable measurement logging and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Digital Thread Micrometer With 60° Anvil, Digital Readout, Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 175–200 mm measurement range, 0.001 mm resolution and a ratchet stop for consistent thread inspection results; order the micrometer directly via Metav Werkzeuge or consult the Metav team for application advice. Digital Thread Micrometer M302.198.D — 175–200 mm range, 60° setting gauge The Digital Thread Micrometer M302.198.D is a workshop-grade digital micrometer for precise measurement of threaded profiles, intended for production control and inspection of external threads. Digital readout with ABS/INC/UNIT/SET keys Measurement range 175–200 mm 60° setting gauge preconfigured Ratchet stop and non-rotating spindle Precision engineered for threaded profiles The micrometer delivers 0.001 mm resolution and an indicated accuracy of ±0.014 mm, making it suitable for demanding thread checks where repeatable results matter. Because the instrument uses a digital display with ABS/INC modes and a UNIT toggle, measurements can be taken and compared quickly without manual conversions. Classified within the standard measuring class (range up to 300 mm), this device balances reach and rigidity so that mid‑sized thread forms can be measured reliably in the workshop or quality department. Consistent handling for repeatable measurements Built for routine inspection, the instrument features a ratchet stop to ensure uniform measuring force and a non-rotating spindle that protects delicate thread profiles during contact. The measuring spindle diameter of 6.5 mm and an overall weight of 1.7 kg contribute to a solid, vibration‑resistant feel while remaining easy to position. These mechanical details reduce operator-induced variance and increase throughput in series checks, translating technical design into time savings and fewer reworks. Digital convenience and workshop integration Operation is intuitive thanks to the digital module with ON/OFF, SET and incremental functions; users can switch units and zero the display for comparative measurements. The interface supports RB 4.1 data output, enabling straightforward connection to inspection software or data logging systems for traceable records. As a purpose‑built micrometer for metrology tasks, it fits inspection benches and production measurement stations where documented results and process capability data are required. For local stock information, technical matching or to order the Metav IndustryLine Digital Thread Micrometer M302.198.D with expert guidance, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M302.198.D GTIN: 4054469115283 Customs tariff: 90173000 Category: Micrometers (Messschrauben) Facts Measurement range: 175–200 mm Resolution: 0.001 mm Reading in inches: 0.00005 in Indicated accuracy: ±0.014 mm Measuring spindle diameter: 6.5 mm Weight: 1.7 kg Data output: RB 4.1 Special features Digital display with ON/OFF, ABS/INC, UNIT and SET keys Ratchet stop for reproducible measuring force Non-rotating spindle to protect thread profiles 60° setting gauge for threaded measurement Designed for production and inspection workflows FAQ What is the measurement range of this micrometer? The measurement range of the Digital Thread Micrometer M302.198.D is 175–200 mm, suitable for standard workshop and inspection tasks. What resolution and accuracy does the micrometer provide? The instrument offers a resolution of 0.001 mm and an indicated accuracy of ±0.014 mm for precise thread measurements. Does the micrometer allow data transfer to a computer system? Yes, the micrometer is equipped with an RB 4.1 data output that supports connection to data logging or inspection software. Which features help to ensure repeatable measurements? Repeatability is supported by the ratchet stop and the non-rotating spindle, which together maintain consistent measuring force and protect the thread profile during contact with the Digital Thread Micrometer M302.198.D. Is the display able to switch units and modes? The digital readout includes ON/OFF, ABS/INC, UNIT and SET keys to toggle measurement units and zero the instrument for incremental checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Micrometer W/ Ratchet Stop, 0.004mm Accuracy, ISO 17025 Cal Cert - Microtech Metrology
Combine ±0.004 mm accuracy, a ratchet-stop spindle and an ISO 17025 calibration certificate to ensure traceable, repeatable external measurements for production control. Order the micrometre directly via Metav Werkzeuge or consult our specialists for application advice. Micrometre 175–200 mm by Microtech Metrology — 0.01 mm resolution, ISO 17025 calibrated A Micrometre 175–200 mm designed for precise external measurement tasks in production, quality control and toolrooms where repeatability and traceability are required High-precision ±0.004 mm accuracy Resolution 0.01 mm analogue scale Ratchet-stop micrometre head Calibration certificate ISO 17025 included Traceable accuracy for production control The robust measuring spindle and finely graduated analogue scale deliver a verified resolution of 0.01 mm and an operational accuracy of ±0.004 mm, making this instrument suitable for standard and high-precision workshop applications. The combination of fine resolution and low measurement uncertainty supports consistent quality checks, reducing rework and non-conformance risk in serial production. The tool is therefore a practical choice when reproducible external dimensions are essential. Consistent contact force for repeatable readings Equipped with a ratchet-stop mechanism, the instrument enforces a uniform contact pressure at every measurement, which reduces operator-induced variation and enhances comparability between shifts or operators. The controlled spindle advance protects both the measuring faces and workpiece while improving throughput in routine inspections. This mechanical guidance means fewer outliers in measurement logs and simpler statistical process control. Durable design for workshop environments The solid anvil with Ø6.5 mm contact faces and a sturdy frame provide stability during external measurements on shafts, rings and turned parts. The analogue operation avoids battery dependency and supports immediate use on the shop floor, while the physical build resists daily handling in busy environments. The result is a reliable instrument that balances precision with the practicality required in machine shops and toolrooms. Certified calibration for quality systems The micrometre is delivered with a calibration certificate issued to ISO 17025, ensuring traceability to national standards and easing integration into documented quality management systems. This certification is particularly relevant for suppliers and inspection departments that must demonstrate measurement capability during audits. The included certificate simplifies calibration records and supports compliance with internal and external quality requirements. For traceable measuring solutions such as the Microtech micrometre, contact Metav Werkzeuge in Emmerich for tailored technical advice and procurement: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 110112001 GTIN: 4061905459276 Manufacturer: Microtech Metrology Category: Messschrauben (micrometres) eClass: 21170328 Facts Measuring range: 175–200 mm Measuring range min: 175 mm Measuring range max: 200 mm Resolution / reading: 0.01 mm Accuracy: 0.004 mm Anvil diameter: 6.5 mm Special features Ratchet-stop spindle Analogue display Calibration certificate ISO 17025 included High accuracy design FAQ What measurement range does this micrometre cover? The instrument covers the 175–200 mm measuring range, specified for external measurements on shafts, rings and medium-sized turned parts. Is the micrometre delivered calibrated? Yes — the micrometre from Microtech Metrology is supplied with a calibration certificate issued to ISO 17025, ensuring traceability and documented measurement capability. How does the ratchet-stop help in daily use? The ratchet-stop ensures a consistent contact force at the measuring faces, which reduces operator variation and improves repeatability across repeated checks. What resolution and accuracy can be expected? This model provides an analogue resolution of 0.01 mm and an operational accuracy of ±0.004 mm, suitable for demanding workshop and production inspections. Is the instrument suitable for shop-floor use? Yes — the robust anvil design and analogue operation make it well suited for regular use in machine shops and inspection benches. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
175-200mm Precision Micrometer Digital Color 2.4" Touchscreen, Non‑Rotating Spindle, ISO 17025 Calibrated - Microtech Metrology
Benefit from ISO 17025‑calibrated measurement combined with 0.007 mm accuracy and integrated data transfer for reliable production control. Order the Micrometer 175–200 mm directly via Metav Werkzeuge or consult the technical team for application guidance and delivery arrangements. Micrometer 175–200 mm — ISO 17025‑calibrated, Wireless + USB (Microtech Metrology) The Micrometer 175–200 mm is a digitally read outside micrometer for workshop and quality‑control applications, offering a 2.4" colour touchscreen and dual‑channel data output for seamless process integration ISO 17025 calibrated for traceable results 0.007 mm measurement accuracy Wireless and USB data transfer 2.4" colour touchscreen display Traceable precision for production control The device delivers ±0.007 mm accuracy and a high‑resolution readout (0.0001 mm), meeting the demands of fine measurement tasks in industrial environments. Delivered fully calibrated to ISO 17025, it arrives with a calibration certificate to ensure traceability and conformity with laboratory standards. This level of documented precision reduces rework and supports quality audits, making the instrument suitable for incoming inspection and process control. Streamlined data integration to cut reporting time Equipped with wireless and USB data output alongside a 2.4" colour touchscreen, the instrument simplifies transfer of measurement records into inspection software and production spreadsheets. The digital interface reduces transcription errors and speeds up recording, so measurement results become actionable more quickly. Built‑in connectivity supports both manual spot checks and automated data capture, improving throughput without compromising accuracy. Practical design for workshop handling Designed for robust routine use, the micrometer features a non‑rotating spindle that improves contact stability and reduces measurement scatter on cylindrical surfaces. The instrument sits in the Standard measuring class (max range 200 mm), which balances reach and stiffness for typical machine‑shop components. Note that a spherical anvil is not included; this allows selection of the appropriate anvil style for specific gear or shaft measurements. The housing and display are optimised for frequent use and clear visibility on the shop floor. For traceable measurements and efficient data capture, request Microtech Metrology’s ISO 17025‑calibrated micrometer from Metav Werkzeuge—contact the technical team in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and delivery details Technical data SKU: 110742008 GTIN: 4061905458026 Manufacturer: Microtech Metrology Facts Measuring range: 175–200 mm Resolution: 0.0001 mm Accuracy: ±0.007 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Calibration: ISO 17025, certificate included Special features Non‑rotating spindle Spherical anvil not included Digital readout Wireless and USB connectivity Category: Micrometers FAQ What level of accuracy can be expected from this instrument? The micrometer offers an accuracy of ±0.007 mm and a reading resolution of 0.0001 mm; it is supplied with an ISO 17025 calibration certificate to document performance. Which data transfer options are available for measurements? Measurement data can be exported via wireless connection or USB, enabling direct logging into inspection software and reducing manual transcription. Is a spherical anvil supplied with the micrometer? No, the spherical anvil is not included; this allows selection of the appropriate anvil type for the intended measuring task. For which applications is this measuring range suitable? With a 175–200 mm range the instrument falls into the Standard class, making it well suited to general machine‑shop inspection, medium‑sized components and routine quality control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
175-200mm Precision Micrometer With Colour Touchscreen Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceability, high measurement accuracy and fast data transfer for dependable thread inspection and production control; order this micrometer directly via Metav Werkzeuge or ask our consultants if needed. Microtech Thread Micrometer "Metrisch 60" — 175–200 mm, ISO 17025 calibrated The Microtech Thread Micrometer "Metrisch 60" is a digital, workshop‑ready instrument for precise thread and small‑feature measurements across a 175–200 mm range. ISO 17025 calibration certificate included Wireless and USB data output 2.4" colour touchscreen readout Measurement range 175–200 mm with Metric 60 anvils Traceable accuracy that reduces rework and inspection time Engineered for production and quality departments, this micrometer delivers accuracy ±0.007 mm across its full measuring span, backed by an official ISO 17025 calibration certificate. The high resolution (0.0001 mm readout) and the micrometer’s stable spindle design minimise measurement uncertainty and enable reliable pass/fail decisions during inspections. By replacing manual note‑taking and inconsistent analogue readings, the instrument helps to reduce scrap rates and accelerates quality control routines, providing a measurable improvement in process stability. Faster logging and fewer transfer errors for efficient workflows Equipped with Wireless + USB data output and a 2.4" colour touchscreen, the micrometer integrates into digital inspection procedures and logging software with minimal setup. The touchscreen offers clear numeric and graphical feedback, while the wireless link allows immediate transfer of measured values to a PC or inspection system, eliminating transcription errors. The micrometer’s electronic measurement chain, combined with the non‑rotating spindle mechanism, secures repeatable readings and streamlines batch documentation — an advantage for continuous production environments and laboratories alike. Purpose-built accessories and features for thread measurement Designed for metric thread applications, the instrument ships with 6 anvils (0.4–7 mm) tailored to Metric 60 thread measurement, enabling quick adaptation to common standards without additional tooling. The digital control and included anvil set support inner and outer thread checks as well as specialised contact configurations, making the device versatile in inspection benches and calibration labs. Supplied fully calibrated to ISO 17025, the micrometer is suitable where traceability and auditability are required; the calibration certificate is delivered with the instrument for immediate use in compliant quality systems. Choose the Microtech Thread Micrometer for traceable, workshop‑grade thread inspection — contact Metav Werkzeuge in Emmerich for technical advice or to arrange delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 110712008 GTIN: 4061905457036 Brand: Microtech Metrology Type: Metrisch 60 Core specifications Measurement range: 175–200 mm Accuracy: ±0.007 mm Resolution / reading: 0.0001 mm Display size: 2.4 inches Special features ISO 17025 calibration certificate included Data output: Wireless + USB Digital colour touchscreen readout Non‑rotating spindle for repeatability Includes 6 anvils 0.4–7 mm FAQ What measurement range does the micrometer cover? The Microtech Thread Micrometer covers a measuring span of 175–200 mm, suitable for medium‑sized threaded components within that range. Is the instrument supplied calibrated and traceable? Yes — the micrometer is delivered fully calibrated to ISO 17025 and comes with the calibration certificate for traceability and audit purposes. How are measurement results transferred to a PC? Measurement data from the micrometer can be transferred via Wireless connection or USB, enabling direct logging into inspection software or spreadsheet systems. Which accessories are included for thread measurement? The delivery includes 6 anvils (0.4–7 mm) set for Metric 60 applications, permitting immediate use for common thread checks. Does the spindle rotation affect measurement repeatability? This micrometer features a non‑rotating spindle, which helps maintain consistent contact geometry and improves repeatability during successive measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
175-200mm Ratchet Thimble Micrometer 0.01mm, Blue Powder Coating, Hardened Measuring Faces, DIN 863, Supplied in Case - Metav IndustryLine
Take advantage of the combination of high repeatability, robust workshop design and precise 0.01 mm resolution for consistent part inspection. Order the instrument directly via Metav Werkzeuge or ask our consultants if additional technical details are required. Metav IndustryLine Micrometer M304.415 — Outside micrometer 175–200 mm, 0.01 mm resolution M304.415 is an outside micrometer designed for accurate dimensional checks on larger components in machine and toolmaking and workshop quality control. 0.01 mm graduation for fine resolution Measuring range 175–200 mm Ratchet stop for consistent measuring force Conforms to DIN 863 standard Reliable accuracy and repeatable measurements The micrometer offers a 0.01 mm graduation that supports reliable repeat measurements across the full 175–200 mm span. Built to the DIN 863 standard, the instrument gives a clear, verifiable basis for inspection tasks in production and repair environments. The ratchet stop ensures a constant measuring force, reducing operator-induced variation and improving the reproducibility of readings. For workshops that perform batch checks or incoming‑inspection of larger parts, these features translate into faster decision cycles and fewer measurement rechecks. Robust design for everyday industrial use Constructed with a blue powder‑coated frame and a matt‑chromed measuring drum, the micrometer combines corrosion resistance with an easy‑to‑read scale. The measuring faces are hardened, making them durable against wear and preserving accuracy during repeated contact with steel and other metals. The measuring spindle diameter 6.5 mm and a 0.5 mm spindle pitch provide a stable thread geometry and fine adjustment control, which benefits both coarse positioning and final clamping of the spindle when measuring larger parts. Practical handling and workshop benefits This analogue instrument integrates workshop‑friendly features: the ratchet mechanism prevents over‑tightening, the clear graduation supports quick readouts, and the solid frame reduces flex under hand operation. The tool is ideal for standard workshop metrology where a balance of reach, stiffness and one‑hand operation is required. The instrument is particularly suited to tasks in machinery maintenance, fixture setup and general mechanical quality control, where straightforward, dependable measurements save time and reduce downstream rejects. The Metav IndustryLine provenance adds an assurance of consistent supply and serviceability. Choose the Metav IndustryLine M304.415 for dependable workshop measurement and contact Metav Werkzeuge in Emmerich for tailored advice and order processing: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M304.415 GTIN: 4054469116945 ECLASS: 21170328 ETIM: EC003590 Customs tariff number: 90173000 Facts Type: analogue outside micrometer Measuring range: 175–200 mm Resolution/graduation: 0.01 mm Standard: DIN 863 Measuring spindle diameter: 6.5 mm Spindle pitch: 0.5 mm Special features Frame: blue powder‑coated Measuring drum: matt chrome Hardened measuring faces Ratchet stop for constant force Category: Messschrauben / micrometers FAQ What measuring range does this micrometer cover? The Metav IndustryLine M304.415 covers a measuring range of 175–200 mm and is intended for larger workshop components. What resolution and standard compliance does the instrument offer? This outside micrometer provides a 0.01 mm graduation and is manufactured to conform with DIN 863. Does the micrometer include hardened measuring faces? Yes, the M304.415 is equipped with hardened measuring faces to resist wear and maintain long‑term accuracy. What mechanism prevents over‑tightening during measurement? The micrometer features a ratchet stop that enforces a consistent measuring force for repeatable readings. For which workshop tasks is this model best suited? The instrument is aimed at machine maintenance, fixture and tool checks, and general mechanical quality control where a robust 175–200 mm range and reliable repeatability are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Thread Micrometer With Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from precise thread measurement with an accuracy of ±0.007 mm, flexible Wireless + USB data transfer and delivery fully calibrated to ISO 17025; order the micrometer directly via Metav Werkzeuge or ask our consultants for a specification check. Micrometer — Thread micrometer Whitworth 55 with 2.4" colour touchscreen (Microtech Metrology) A micrometer for precise thread verification and production control, designed for Whitworth 55 threads and equipped with a 2.4" colour touchscreen for clear digital readout. ISO 17025 calibrated with traceable certificate Wireless and USB data output for flexible logging 2.4" colour touchscreen for clear digital readout Whitworth 55 thread anvils included for threaded parts Measure threads reliably and integrate with production systems The instrument combines industrial metrology with straightforward data handling: a robust digital readout and Wireless plus USB outputs allow direct logging into SPC systems or inspection software, reducing transcription errors and accelerating process control. The ±0.007 mm accuracy provides a measurable improvement over standard workshop gauges, so decision-making is based on comparable, machine‑grade data rather than manual estimation. As a result, batch acceptance and in‑process checks become faster and less error‑prone. Built for threaded parts: repeatability and soft contact Measuring threaded profiles demands consistent contact and orientation; the micrometer’s non‑rotating spindle minimises thread deformation during measurement and helps to maintain repeatable clamping force. Included are ten Whitworth 60–3.5 TPI anvils tailored to the Whitworth 55 profile, which reduces setup time for series inspections. The instrument is intended for precision verification of threaded components where reproducible results and surface preservation are priorities. Calibrated delivery and clear inspection documentation This measuring device is delivered fully calibrated to ISO 17025, with a traceable calibration certificate included — a legal and quality assurance benefit for laboratory and production audits. The 2.4" colour touchscreen provides intuitive menus and rapid visual confirmation of results, while the digital architecture supports both short inspection runs and integration into larger measurement workflows. The combination of certified calibration and digital output supports compliance and simplifies quality documentation. Contact Metav Werkzeuge for a technical consultation, ISO 17025 certificate copy and to confirm application suitability for your Whitworth thread inspections Technical Data SKU: 110722008 GTIN: 4061905456831 Manufacturer: Microtech Metrology Facts Measuring range: 175–200 mm Accuracy: 0.007 mm Display: 2.4" colour touchscreen Data output: Wireless + USB Digital instrument: true Calibration: ISO 17025 certified Special features Type: Whitworth 55 thread measurement Included accessories: 10x anvils 60–3.5 TPI (Whitworth 55) Non‑rotating measuring spindle Delivered with traceable calibration certificate FAQ What is the measuring range of this micrometer? The measuring range is 175–200 mm for the Micrometer (Microtech Metrology, SKU 110722008), suitable for medium‑size threaded components. Is the instrument delivered calibrated and with documentation? Yes — the instrument is supplied fully calibrated to ISO 17025 and includes a traceable calibration certificate for audit and quality records. How can measurement data be exported from the device? Measurement values can be transferred via Wireless or USB output for direct logging into inspection or SPC software. Are thread anvils included for Whitworth profiles? The delivery includes ten Whitworth 60–3.5 TPI anvils, prepared for Whitworth 55 thread verification without additional tooling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
175-200mm Three-Point Inside Micrometer Self-Centring, Analog 0.005mm Resolution, Supplied in Case - Metav IndustryLine
Precise internal measurement made simple: the combination of a self‑centring three‑point contact, accuracy ±0.008 mm, and a 175–200 mm measuring range ensures reproducible results across production runs. Order the three‑point internal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Three‑point internal micrometer M836.722 — Self‑centring, 175–200 mm (Metav IndustryLine) A three‑point internal micrometer for reliable internal diameter checks in workshop inspection and production control. Self‑centring three‑point contact Accuracy ±0.008 mm Hardened measuring faces Supplied in protective case Reproducible results through self‑centring three‑point contact The three‑point contact design provides a self‑centring measuring principle that minimises operator‑dependent offset when checking bores and internal diameters. With an analogue readout and a finest reading increment of 0.005 mm, the instrument supports controlled, repeatable measurements appropriate for standard inspection tasks. The specified accuracy of ±0.008 mm places this tool in a precision class suitable for quality control where tight tolerances are required but micrometre‑level laboratory devices are not necessary. The mechanical design reduces setup time on repetitive checks and lowers the rate of rework by delivering stable centring without complex fixturing. Built for everyday workshop demands Constructed with hardened measuring faces, the device resists wear in routine use and maintains measurement integrity over prolonged service intervals. The instrument’s 175–200 mm span places it in the standard workshop range, offering a practical compromise between reach and rigidity for common internal measurement tasks on machine components, housings and assemblies. Supplied in a protective case, it is prepared for transport to and from the shop floor or for secure storage between shifts. The analogue format gives tactile feedback during measurement and removes dependency on batteries, supporting uninterrupted operation in busy production environments. Improve process control and traceability Integrating this three‑point internal micrometer into inspection routines sharpens statistical process control by reducing scatter in internal diameter readings. The robust, easy‑to‑handle geometry encourages consistent technique across operators, while the clear reading increment simplifies documentation and auditing. Together with Metav’s logistical and technical support, the instrument contributes to faster inspection cycles and more reliable acceptance decisions on the shop floor. Metav’s role as a precision‑partner translates into dependable delivery and product selection, making high‑quality measurement accessible across workshops and small production sites. For reliable internal measurement on standard production runs, request the Metav IndustryLine three‑point internal micrometer (M836.722) via Metav Werkzeuge in Emmerich for expert advice and prompt dispatch Technical data Article number: M836.722 GTIN: 4061905040993 Manufacturer: Metav IndustryLine Facts Measuring range: 175–200 mm Accuracy: ±0.008 mm Reading: 0.005 mm Analogue instrument Special features Self‑centring three‑point contact Hardened measuring faces Supplied in protective case FAQ How does the three‑point contact improve measurement reproducibility? The three‑point design centres automatically in the bore so the contact points average out positional errors; the Metav IndustryLine three‑point internal micrometer (M836.722) therefore yields more reproducible internal diameter readings than two‑point gauges. Is the instrument suitable for routine workshop inspection? Yes — the 175–200 mm range and the mechanical, analogue operation are optimised for standard workshop and production control tasks, combining practicality with the stated ±0.008 mm accuracy. Are the measuring faces durable for daily use? The product features hardened measuring faces, which resist wear and extend stable performance over many inspection cycles on typical shop materials. Does the device require batteries or electronic calibration? The instrument is analogue and does not require batteries; calibration should follow the workshop’s metrology schedule and can be performed by an accredited service if traceable certificates are needed. What does the supplied protective case mean for handling? Delivery in a protective case protects the instrument during transport and storage and supports safe handling between inspection stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Three-Point Internal Measuring Tool for Blind Holes, Carbide Measuring Faces, Depth 140mm, Ratchet, Supplied in Case - Metav IndustryLine
Taking advantage of robust three-point measurement, carbide contact faces and a repeatable ratchet stop, this micrometer delivers consistent internal readings across its 175–200 mm range; order the instrument directly via Metav Werkzeuge or consult Metav’s specialists for selection advice. Three-point internal micrometer M312.149.S — 175–200 mm range with carbide faces A three-point internal micrometer for precise measurement of blind bores and large internal diameters in workshop and inspection environments. Three-point internal measurement 175–200 mm measuring range Carbide measuring faces for wear resistance Ratchet stop for reproducible contact Precise internal measurement for blind bores The three-point design delivers stable contact around the circumference, making the instrument particularly suited to blind-hole measurement where axial access is limited. Classified as a standard workshop micrometer (maximum range up to 300 mm), this instrument combines reach and rigidity for routine machine‑shop and quality‑control tasks. The 175–200 mm range and measuring depth 140 mm ensure access to deeper bores while preserving measurement stability. The device is specified for use on blind holes and large internal diameters encountered in components and fixtures. Accuracy and handling for consistent results Mechanical reading capability is paired with a fine scale and vernier, giving a reading step of 0.005 mm and a stated accuracy of 0.007 mm, which positions the tool toward higher mechanical precision within its class. A ratchet stop provides uniform contact force, reducing variation caused by operator pressure and improving repeatability. The carbide measuring faces resist wear when used against typical engineering materials, and the matt‑chromed scale and vernier aid legibility in workshop lighting. The instrument’s mass (approximately 3.7 kg) contributes to stability during measurement cycles. Workshop integration and practical delivery This analogue, three‑point internal micrometer integrates into standard inspection workflows: it is an analogue precision instrument designed for straightforward use in production and QA environments. Delivery is made without a setting ring, enabling buyers to select a calibrated ring suited to their reference standards. The instrument supports typical measuring tasks in machining and fixtures, while Metav’s position as a precision partner offers assurance through a broad portfolio and decades of distribution experience. The tool is supplied ready for workshop use with clear specifications for integration into inspection routines. Contact Metav Werkzeuge to discuss how the M312.149.S meets specific inspection needs or to request ordering and accessory options through Metav Werkzeuge's sales team Technical data Article number: M312.149.S GTIN: 4054469158716 Label: Dreipunkt-Innenmess, 175 - 200 mm, Sackloch mit HM‑Messflächen; ohne Einstellring Manufacturer: Metav IndustryLine Tariff number: 90173000 Key figures Measuring range: 175–200 mm Measuring depth: 140 mm Accuracy: 0.007 mm Reading: 0.005 mm Weight: 3.7 kg Type: Analogue (mechanical) Features and materials Carbide (HM) measuring faces Matt‑chromed scale and vernier Ratchet stop for reproducible contact Delivery without setting ring Suited for blind‑hole measurement FAQ Is this instrument suitable for measuring blind bores? Yes. The M312.149.S is specifically configured for blind‑hole measurement, its three‑point contact ensuring reliable engagement inside blind bores. What reading and accuracy can be expected from the instrument? The instrument offers a reading increment of 0.005 mm and a stated accuracy of 0.007 mm, suitable for precise workshop inspection tasks. Are the measuring faces durable for repeated use? Yes. The micrometer has carbide measuring faces, which provide enhanced wear resistance for use on typical engineering materials. Is a setting ring supplied with the micrometer? No. The delivery is without a setting ring, allowing selection of a reference ring that matches the calibration procedure or in‑house standards. Which workshop category does this tool belong to? This micrometer is a standard workshop instrument (measuring range within 100–300 mm), offering a balance of reach and stiffness for machine‑shop and quality‑control applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Three-Point Internal Micrometer Digital With ON/mm/inch/ABS/PRESET/HOLD, Case - Metav IndustryLine
Take advantage of the combination of centred three‑point contact, high repeatability and a clear digital readout to speed up in‑line inspections and reduce rework. Order this measuring instrument via Metav Werkzeuge or consult our specialists for matching accessories and delivery options. Three‑point internal micrometer M312.259 — Digital readout, 175–200 mm range (Metav IndustryLine) A three‑point internal micrometer designed for precise internal diameter measurement in workshop and inspection environments, suitable for bores and rings in the 175–200 mm range. Digital display with mm/inch and ABS Three‑point contact for centred readings Measurement range 175–200 mm Protective transport case included Centre‑true measurements for reliable bore control The three‑point contact spindle locates concentrically in the bore, producing centre‑true readings that reduce errors from eccentricity and ovality. With an accuracy of ±0.007 mm, the instrument is suited to demanding dimensional checks where repeatability matters; the mechanism converts contact to a stable reading, so fewer repeated measurements are necessary and inspection throughput increases. This approach benefits quality assurance by lowering the frequency of rework and speeding approval of machined components. Fast digital reading and secure data transfer A digital display with 0.001 mm resolution ensures fast, unambiguous readings and reduces transcription errors common with analogue gauges. The readout offers ON/0-, mm/inch-, ABS-, PRESET- and HOLD functions for flexible measuring workflows and temporary value locking. An RB 4 data output is provided for integration with external readout systems or SPC collection, enabling traceable data capture and simpler documentation of inspection results without manual re‑entry. Built for deep bores and workshop handling The gauge covers the 175–200 mm measurement range with a measuring depth of 140 mm, making it suitable for medium‑sized bores, rings and internal features found in tooling and mechanical assemblies. At 3.1 kg the instrument feels robust in the hand and is supplied in a protective transport case for safe storage and movement between the measuring bench and shop floor. Note that the delivery is without a setting ring, so specify the required master ring separately if a reference standard is needed for onsite zeroing. For dependable internal measurement and integrated data capture, contact Metav Werkzeuge to discuss the M312.259 and ensure the right accessories and delivery format for your inspection process. Technical Data Article number: M312.259 GTIN: 4054469120010 eCl@ss: 21170335 ETIM: EC003590 Tariff code: 90173000 Core specifications Measurement range: 175–200 mm Measuring depth: 140 mm Resolution: 0.001 mm Accuracy: ±0.007 mm Weight: 3.1 kg Features / Special items Digital display with ON/0-, mm/inch-, ABS-, PRESET- and HOLD Data output: RB 4 Protective transport case included for transport Setting ring: not included Measuring faces present FAQ How precise is the M312.259 for internal measurements? The M312.259 three‑point internal micrometer achieves an accuracy of ±0.007 mm with a display resolution of 0.001 mm, suitable for routine quality control and fine inspection tasks. Is the instrument supplied with a calibration certificate? The instrument is supplied with the standard factory calibration; an ISO 17025 calibration is not indicated for this item. What is included in the delivery package? Delivery includes the micrometer in a protective transport case; the setting ring is not included and must be ordered separately if required. Can this micrometer reach deep internal features and larger bores? Yes — the measuring depth of 140 mm combined with the 175–200 mm range makes it appropriate for medium‑sized bores, rings and internal features common in moulds and assemblies. How can measurement values be exported from the micrometer? The gauge is equipped with an RB 4 data output for connection to compatible readout systems, enabling direct transfer of measurements to SPC or documentation tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Three-Point Internal Micrometer For Blind Hole Measurement, Digital With ON/mm/inch/ABS/Preset/Hold, 0.007mm Accuracy, Plastic Case - Metav IndustryLine
Benefit from a robust three‑point measuring head and a high‑resolution digital readout for reliable blind‑hole inspection; the combination of precise measurement, durable carbide faces and straightforward data transfer supports consistent quality control. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Three‑point internal micrometer M312.259.S — digital, 175–200 mm (Metav IndustryLine) The Three‑point internal micrometer M312.259.S is a digital measuring instrument designed for accurate inspection of blind holes and large bores in workshop and production environments. Digital readout with ABS and mm/inch Three‑point head for blind‑hole measurement Measuring range 175–200 mm, 140 mm depth Carbide measuring faces and robust build High‑precision digital measurement for process reliability The instrument provides a digital display with a resolution of 0.001 mm and a measured accuracy of ±0.007 mm, delivering reproducible values that support statistical process control and reduce scrap rates. The readout includes ON/0, mm/inch, ABS, PRESET and HOLD functions, enabling straightforward switching between measurement modes and stable capture of values. Integrated RB4 data output facilitates wired transfer to data loggers or SPC systems, streamlining documentation and traceability in inspection workflows. Purpose‑built geometry for blind‑hole inspection and extended reach Equipped with a three‑point head, the instrument is optimised for centring inside blind bores where conventional two‑point devices are less reliable; the design allows consistent contact with the bore even when the measurement cannot pass fully through. The effective measuring range of 175–200 mm with a 140 mm measuring depth positions this device in the standard class for workshop metrology, offering a balance of reach and stiffness suited to machine and toolroom applications. Delivery excludes a setting ring, so calibration or reference standards should be arranged if required. Durable construction and workshop usability Constructed with carbide measuring faces, the device resists wear and maintains measurement integrity under frequent use. At around 3.1 kg, the instrument remains manageable for bench or fixture work while its solid build reduces deflection during measurement. A protective transport case is supplied for safe handling and storage during transit. Clear mechanical design and intuitive buttons make the instrument readily adoptable by inspection technicians, while the combination of robust components and digital connectivity supports long‑term reliability on the shop floor. For precise blind‑hole measurement and application guidance, contact Metav Werkzeuge for product availability and advice from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: M312.259.S GTIN: 4054469158983 eClass: 21170335 ETIM: EC003590 HS code: 90173000 Data output: RB 4 Facts Measuring range: 175–200 mm Measuring depth: 140 mm Resolution: 0.001 mm Accuracy: 0.007 mm Weight: 3.1 kg Special features Digital display with ON/0, mm/inch, ABS, PRESET, HOLD Three‑point head for blind‑hole measurement Carbide measuring faces Supplied in transport case Delivery without setting ring Designed for workshop and production inspection FAQ What types of measurements can this instrument perform? The M312.259.S three‑point internal micrometer performs internal diameter measurements of blind bores and large bores, providing reliable centring and repeatable readings for inside measurements. What accuracy and resolution does the instrument offer? The instrument offers a resolution of 0.001 mm and an accuracy of ±0.007 mm, making it suitable for precise workshop inspection and quality control tasks. Is a setting ring included for calibration? Delivery is made without a setting ring; a reference standard or calibration ring should be used separately to verify zero and traceability during initial setup. How are readings transferred to a PC or data logger? Readings can be exported via the RB4 data output, allowing wired connection to data acquisition systems or SPC software for documentation and analysis. Are the measuring faces suitable for high‑use environments? Yes; the instrument is fitted with carbide measuring faces for enhanced wear resistance and longevity in frequent inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Three-Point Internal Micrometer Self-Centring, Interchangeable Anvils, Supplied in Case - Metav IndustryLine
Take advantage of the self‑centring three‑point contact, the 175–200 mm measuring range and the proven 0.005 mm accuracy to ensure reliable blind‑hole checks in routine inspection. Order the instrument directly via Metav Werkzeuge or ask the consultants for application advice. Three‑Point Internal Micrometer (MS908.666) — Self‑centring, 175–200 mm range; 0.005 mm accuracy Three‑Point Internal Micrometer (MS908.666) is a mechanical measuring instrument designed for precise measurement of blind holes in the standard workshop range. Self‑centring three‑point contact system Measuring range 175–200 mm High accuracy 0.005 mm Interchangeable measuring anvils Reliable centring for blind‑hole measurement The self‑centring three‑point contact design guarantees consistent alignment with the bore axis, reducing operator‑dependent variance during inspections. With a measuring range of 175–200 mm, this instrument falls into the standard class for workshop metrology: it combines sufficient reach with manageable stiffness for repeatable checks on housings and medium‑sized components. The mechanical, analog construction gives direct tactile feedback when seating the contacts, which supports quick decision‑making on the shop floor and lowers cycle time for routine checks. Accurate results with carbide measuring faces Equipped with carbide measuring faces, the gauge provides wear resistance where contact durability matters most. The specified accuracy of 0.005 mm positions the instrument for high‑precision internal measurement tasks where sub‑hundred‑micrometre reproducibility is required. This level of accuracy is communicated as a clear, quantifiable benefit: fewer reworks, more reliable acceptance testing and better conformity with drawing tolerances during incoming or in‑process inspections. Adaptable anvils for different bore conditions Interchangeable measuring anvils increase the micrometer’s versatility: the exchangeable heads allow adaptation to varying bore geometries and surface finishes without sacrificing the calibration baseline. For workshops that encounter a range of blind‑hole diameters, the ability to switch measuring faces minimises downtime and reduces the need for multiple dedicated gauges, thereby improving operational efficiency and tool inventory management. Robust, workshop‑ready mechanical design The analogue mechanism with a precise reading increment of 0.005 mm is robust and straightforward to maintain in industrial environments. The solid mechanical construction suits regular use in inspection benches and quality departments where resilience and uncomplicated operation are priorities. The compact feel combined with the instrument’s length makes it practical for ergonomic handling during repeated measurements, supporting consistent measurement practice and traceable results. For precise blind‑hole inspections, contact Metav Werkzeuge to discuss the Three‑Point Internal Micrometer MS908.666 and its interchangeable anvils for seamless integration into existing inspection routines. Technical data Article number: MS908.666 Product type: Three‑point internal micrometer Brand: Metav IndustryLine Facts Measuring range: 175–200 mm Minimum range: 175 mm Maximum range: 200 mm Accuracy: 0.005 mm Reading increment: 0.005 mm Length: 145 mm Operation: Analog Special features Self‑centring three‑point contact Interchangeable measuring anvils Carbide measuring faces Suitable for blind‑hole measurement Mechanical design for workshop use FAQ What measuring range does the instrument cover? The Three‑Point Internal Micrometer MS908.666 from Metav IndustryLine covers a 175–200 mm measuring range. How precise is the three‑point internal micrometer? The gauge delivers an accuracy of 0.005 mm, offering high repeatability for internal bore checks. Can the measuring faces be changed for different bores? Yes, the instrument features interchangeable measuring anvils, allowing adaptation to varying bore geometries without replacing the whole tool. Is the micrometer suitable for blind‑hole measurements? Designed specifically for blind‑hole (sackloch) inspection, the self‑centring three‑point design ensures reliable centring in such applications. What construction ensures long service life in the workshop? The MS908.666 uses carbide measuring faces and a robust analogue mechanism to withstand frequent use in industrial inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175-200mm Universal Micrometer, Replaceable Inserts, Friction Ratchet, 7 Sets, Plastic Case - Metav IndustryLine
Take advantage of the combination of consistent accuracy, practical interchangeable inserts and a friction ratchet for repeatable measurements; this micrometer supports reliable production work and straightforward tool maintenance. Order directly via Metav Werkzeuge or consult our specialists for application advice. Uni. Micrometer M309.087 – outside micrometer, 175–200 mm, interchangeable inserts (Metav IndustryLine) The Uni. Micrometer M309.087 is an outside micrometer for workshop and inspection use, designed to measure medium-sized components with consistent contact pressure and versatile tip geometry. *175–200 mm measuring range *Friction ratchet for consistent pressure *Seven interchangeable measuring inserts *Non-rotating measuring spindle Repeatable high-precision measurement for standard workshop tasks This instrument is classified as a standard micrometer (100–300 mm), providing the best compromise between reach and stiffness for general mechanical and metalworking applications. The device delivers a resolution of 0.01 mm and a stated accuracy of 0.014 mm, which makes it well suited to routine quality checks and workshop set-ups where reproducibility matters. The integrated friction ratchet stabilises closing force so that each reading is taken under comparable contact conditions, reducing operator-induced scatter and speeding up inspection loops. Flexible measuring geometry for varied component contours Seven interchangeable measuring inserts are supplied to adapt the contact geometry to shafts, grooves and stepped features without the need for separate micrometers. Changing inserts permits targeted contact shapes while keeping a single calibrated frame in service, which simplifies inventory and reduces tool-change downtime. The non-rotating measuring spindle minimises surface marking on sensitive parts and, together with the 6.5 mm spindle diameter, provides a rigid contact interface that supports stable, repeatable readings even on slightly irregular surfaces. Robust construction aimed at daily industrial use The measuring body combines a painted frame with a matt chrome-plated measuring drum, blending corrosion protection with a low-reflective, easy-to-read scale surface. A clear, mechanical thimble and vernier layout allow analogue reading at the specified resolution, avoiding dependence on batteries or electronics in harsh environments. At approximately 1.7 kg, the tool balances solidity and manoeuvrability for single-person handling during routine shop-floor checks and fixture set-ups. Practical inclusions that speed up measurement tasks Included accessory pairs of special measuring inserts expand the application range immediately after commissioning, while the factory-standard conformity ensures consistent production behaviour across batches. The unit is identified by SKU M309.087 and GTIN 4054469117911, enabling easy integration into asset registers and inspection protocols. For workshops seeking dependable metrology that aligns with everyday production rhythms, this micrometer offers a pragmatic mix of durability, adaptability and measured precision. Contact Metav Werkzeuge for tailored technical advice or to request a specification sheet and delivery details from our Emmerich distribution centre – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M309.087 GTIN: 4054469117911 Manufacturer: Metav IndustryLine Facts Measuring range: 175–200 mm Resolution / reading: 0.01 mm Accuracy: 0.014 mm Measuring spindle diameter: 6.5 mm Weight: 1.7 kg Special features Frame painted and measuring drum matt chrome-plated Non-rotating measuring spindle Friction ratchet Seven pairs of special measuring inserts included Norm: Werksnorm Customs tariff number: 90173000 Category: Outside micrometers FAQ What measuring range does this micrometer cover? The Uni. Micrometer M309.087 covers a measuring range of 175–200 mm, placing it in the standard workshop category for general machine‑building and metalworking tasks. How accurate and precise is the instrument? The micrometer offers a reading resolution of 0.01 mm and a specified accuracy of 0.014 mm, making the M309.087 suitable for repeatable dimensional checks in production and inspection routines. Are different contact shapes available for special components? Yes, the M309.087 is supplied with seven pairs of interchangeable measuring inserts to adapt contact geometry for shafts, grooves and stepped features without changing the whole instrument. Does the spindle rotate during measurement? No, the measuring spindle is non‑rotating, which reduces the risk of marking delicate surfaces and contributes to stable contact during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175mm Setting Gauge For Thread Micro, 60° For Thread Inserts, 0.07kg - Metav IndustryLine
Take advantage of the 60° thread angle and compact 175 mm length to ensure consistent settings for thread micrometers; combine precise geometry and easy handling for a streamlined setup process. Order the article directly via Metav Werkzeuge or consult our specialists for application advice. Setting Gauge 175 mm for Thread Micrometer, 60° — Metav IndustryLine Setting Gauge 175 mm for Thread Micrometer, 60° is a calibrated accessory intended to set and verify the contact geometry of thread micrometers and similar gauging tools in workshop and metrology environments Precise 60° setting for metric thread inserts Also suitable for 55° Whitworth thread inserts Compact 175 mm gauge for workshop use Accuracy where thread form dictates fit and function The Setting Gauge 175 mm for Thread Micrometer, 60° reproduces the essential flank angle required for correct micrometer adjustment, so the measuring instrument reads threads with reliable geometry. The option for 60° form, and compatibility with 55° Whitworth profiles, allows straightforward adaptation to the common thread standards used in mechanical engineering. Such defined geometry reduces setup variability and supports repeatable checks, which in turn improves process stability during assembly and inspection. The gauge’s nominal length of 175 mm offers sufficient engagement for standard thread micrometers while remaining compact enough for bench-top work. Faster set-up, fewer measurement iterations A compact gauge with a clear functional focus speeds routine operations: the defined angle and form enable quick visual and tactile alignment, cutting the number of necessary trial measurements. By minimising jiggling and repositioning, the accessory contributes to a smoother workflow and reduced throughput times in small-batch or serial production. The simple geometry also aids less experienced operators by providing an unambiguous reference surface, which helps to lower measurement scatter and the need for repeated calibration cycles. Where traceable and repeatable settings matter, such an accessory supports efficient quality control. Robust specification for purchasing and integration This accessory is listed as an industrial measuring device component and is intended for integration with thread micrometers and dimensional inspection benches. Its clear specification — angle form, nominal length and application note for Whitworth threads — simplifies procurement decisions and compatibility checks. As an accessory from a recognised line, it suits workshop metrology, toolrooms and service departments that require a dedicated reference for thread setting tasks. The concise technical definition reduces ambiguity at the point of purchase and supports consistent inventory and process documentation. For reliable thread-setting results trust Metav IndustryLine’s setting gauge—contact Metav Werkzeuge for product details and delivery from Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M309.097.6 GTIN: 4054469118291 SKU: M309.097.6 Data Length: 175 mm Angle: 60° Tariff number: 90173000 ECLASS: 21170102 Special features 60° for thread inserts or 55° for Whitworth thread inserts Accessory for thread micrometers Category: Accessories (measuring devices) FAQ What thread forms does this gauge represent? The gauge provides a 60° flank form for metric thread inserts and is also applicable to 55° Whitworth thread profiles where stated. How is the gauge used with a thread micrometer? The accessory serves as a reference surface to set or check the micrometer’s anvils and measuring faces; the defined angle ensures the instrument contacts a known flank geometry. Is the nominal length important for compatibility? Yes — the 175 mm nominal length balances engagement and handling for most workshop micrometers, offering enough contact for secure alignment while remaining compact. Can this accessory be used in a calibration routine? The accessory provides a stable geometric reference for routine functional checks of thread-setting instruments; formal calibration procedures depend on the laboratory’s requirements. Which Metav IndustryLine article number should be referenced when ordering? Reference SKU M309.097.6 or article number M309.097.6 for accurate ordering and stock enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175mm Thread Setting Gauge 55° For Thread Micrometer Inserts, 60° Option - Metav IndustryLine
Taking advantage of a 175 mm reference length and a precise 55° Whitworth profile, this setting gauge delivers repeatable verification for thread micrometers while remaining easy to handle at just 0.07 kg; order directly via Metav Werkzeuge or contact our consultants for application advice. Setting gauge 175 mm for thread micrometer (55°) — Metav IndustryLine Setting gauge 175 mm for thread micrometer (55°) is a precision reference tool designed to verify and set Whitworth‑profile thread micrometers and related thread measuring attachments. Precise 55° Whitworth thread profile 175 mm reference length for repeatable checks Ultra-light 0.07 kg for easy handling Accessory for thread micrometers and gauges Faster, more reliable thread micrometer checks The setting gauge 175 mm for thread micrometer (55°) provides a stable reference profile for verifying the contact geometry of thread micrometers and optical thread gauges. The 55° Whitworth profile is reproduced to industry tolerances so that measurement instruments can be set or checked quickly, reducing calibration downtime and streamlining inspection flows. Where different profiles are used, an alternative 60° for thread inserts is noted in the product specification to cover standard imperial insert forms, preventing mix‑ups on the workshop bench. Practical handling that speeds up routine inspection Weighing only 0.07 kg, this reference piece is purposely lightweight for easy positioning during multi‑point checks while remaining rigid enough to present a clear profile to measuring anvils. The compact 175 mm length offers a balance between reach and controllability, making it suitable for bench‑level verification of micrometers and gauge blocks without complex fixturing. As an accessory in the measuring‑instruments category, it integrates with existing inspection setups and supports consistent zeroing of instruments, improving repeatability of results across shifts. Where and how this reference is used in production This accessory is intended primarily for use in machine shops and quality departments that service imperial and Whitworth thread profiles. It serves as a straightforward reference for instrument setup, incoming inspection of micrometres and as a quick check during tool changeovers. The simple profile reproduction helps technicians verify seating and alignment of micrometer anvils or thread gauges, ensuring traceable adjustments of measuring equipment and reducing the risk of measurement error on threaded components. Contact Metav Werkzeuge to specify the ideal Metav IndustryLine setting gauge for Whitworth threads and arrange prompt supply or technical matching from our Emmerich location. Technical data SKU: M309.091.6 GTIN: 4054469118161 Mass / length: 175 mm Weight: 0.07 kg Angle: 55° Tariff number: 90173000 Facts Length: 175 mm Weight: 0.07 kg Profile angle: 55° Tariff: 90173000 Special features 55° Whitworth thread profile Option: 60° for thread inserts Accessory for thread micrometers and thread gauges Category: Accessory for measuring instruments (Zubehör) FAQ Is this reference suitable for Whitworth thread micrometers? Yes. The setting gauge reproduces a 55° Whitworth profile and is intended for verification and setting of Whitworth‑profile thread micrometers and related measuring attachments. Can the gauge be used for thread inserts with a 60° profile? An alternative 60° profile is indicated in the product specification for thread‑insert forms; check the chosen variant to ensure compatibility with the intended insert geometry. What is the length and handling advantage of this gauge? The reference length is 175 mm, which offers a practical compromise between reach and ease of handling; at 0.07 kg it is lightweight for quick bench checks. Does the product include a traceable identifier for inventory and procurement? Yes. The item is listed with SKU M309.091.6 and GTIN 4054469118161 for unambiguous identification in procurement and inspection records. For which applications is this accessory recommended? The gauge is recommended for workshop and quality‑control environments that set or verify thread micrometers, especially when Whitworth and imperial thread forms are encountered. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175–200mm Bowl Anvil Micrometer Ø30mm Measuring Face, Ratchet Stop, Painted Frame, Matt Chrome Drum - Metav IndustryLine
Take advantage of the combination of high accuracy (0.007 mm), a practical measuring range of 175–200 mm, and a ratchet drive that ensures repeatable contact for reliable production checks; order the disc micrometer directly via Metav Werkzeuge or contact our consultants for application advice. M309.257 Disc Micrometer — Standard-range micrometer with ratchet and Ø30 mm disc anvils The M309.257 disc micrometer is a robust analogue instrument designed for workshop and production use, offering precise thickness and outside-diameter checks in the 175–200 mm range. Measuring range 175–200 mm Accuracy 0.007 mm Ratchet spindle for consistent force Non-rotating spindle and Ø30 mm discs Reliable precision for repeatable production checks The instrument delivers a verified accuracy of 0.007 mm with a reading resolution of 0.01 mm, which places it well above common workshop standards and reduces rework from measurement uncertainty. The analogue scale is easy to interpret while the ratchet mechanism controls contact pressure, producing consistent results across repeated measurements. This combination supports efficient quality control in standard machining and assembly tasks, improving throughput by cutting down on measurement variability. Built for stable handling and long service life A painted frame contributes mechanical durability and corrosion resistance in everyday shop environments, while the matt‑chrome thimble reduces glare for clearer readings. The device’s non‑rotating spindle stabilises the contact surface during measurement, and the Ø30 mm disc anvils suit flat and slightly curved surfaces, giving reliable support for sheet, flange and component edge checks. The overall construction balances stiffness and manoeuvrability so that routine checks remain quick and reproducible. Practical design that speeds up inspection routines The integrated ratchet drive prevents over‑tightening and shortens the learning curve for operators, which is particularly useful on mixed‑skill teams. The instrument’s mass and form — around 2.2 kg — lend a reassuring feel that helps stabilise measurements, especially near the upper end of its range. Designed as a standard‑range micrometer, it fills the gap between compact gauges and larger long‑range instruments, making it a versatile choice for general tooling, fixtures and component batches. Where this micrometer fits into workshop workflows Specified for general machine‑shop and inspection tasks, the tool is ideal for routine dimensional checks on castings, turned parts and assemblies where a 175–200 mm span is required. The mechanical design minimises operator influence and supports rapid sampling during setup and production runs. For purchases intended as part of a broader metrology roll‑out, the product integrates neatly with conventional inspection procedures and can be used alongside calipers and gauges for cross‑checks and calibration chains. For tailored advice or to secure supply from Metav Werkzeuge in Emmerich, contact our sales team at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will recommend the right measuring set-up for the intended application Technical data SKU: M309.257 GTIN: 4054469118765 Category: Messschrauben Label: Teller-Mess ND 175 - 200 mm, Ø30 mm Numbers / Core technical data Measuring range: 175–200 mm Accuracy: 0.007 mm Resolution (reading): 0.01 mm Weight: 2.2 kg Anvil diameter: Ø30 mm Tariff number: 90173000 Special features Analog device Ratchet spindle Non-rotating spindle Painted frame Matt-chrome measuring drum Material: painted frame and matt-chrome thimble Category path: Messgeräte › Messschrauben FAQ What is the measuring range of this micrometer? The micrometer covers a measuring range of 175–200 mm, making it a standard‑range instrument for workshop and production checks. How fine is the measurement resolution and how accurate is it? The instrument has a reading resolution of 0.01 mm and an accuracy of 0.007 mm, providing reliable repeatability for routine quality control. Does the micrometer include a ratchet and why is that useful? Yes, the micrometer features a ratchet spindle; the ratchet ensures consistent contact force, which improves repeatability during successive measurements with the M309.257. Which surfaces are the disc anvils suitable for? The Ø30 mm disc anvils are suitable for flat and slightly curved surfaces such as sheet metal edges, flanges and component faces commonly inspected in machining and assembly. Is this micrometer suitable for general workshop metrology? Yes, as a standard‑range micrometer the device is optimised for everyday applications in machine shops and inspection rooms where a 175–200 mm span is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175–200mm Digital Micrometer 0.001mm Resolution, Ratchet, Matt Chrome Measuring Drum, Supplied in Case - Metav IndustryLine
Take advantage of a high-resolution measuring range, robust spindle and ratchet for repeatable contact force, and a clear digital readout to improve inspection throughput and traceability. Order the instrument directly via Metav Werkzeuge or consult the Metav team for specification support. Digital Micrometer M302.261 — 175–200 mm, 0.001 mm resolution (Metav IndustryLine) The Digital Micrometer M302.261 is an outside micrometre designed for precise dimensional checks in workshop and inspection environments, offering a high-resolution digital readout and a controlled ratchet stop for reproducible measurements. 175–200 mm measuring range 0.001 mm resolution digital display Ratchet stop for consistent contact force Hardened measuring faces, supplied in transport case Accuracy and efficiency for routine inspection The instrument delivers a 0.001 mm display resolution, making it suitable where fine distinction between tolerances is required. The large measuring range of 175–200 mm covers medium‑sized components without sacrificing rigidity, while the integrated digital display with ON/OFF/SET and ABS/INC/UNIT functions streamlines readout, unit selection and datum setting. For production workflows, this combination reduces read‑and‑record time and supports faster decision cycles in quality control. Design that reduces measurement variability A built‑in ratchet stop ensures a consistent measuring force, which lowers operator‑induced variation and improves repeatability across batches. The frame is enamelled and the spindle is matt chrome‑plated, combining corrosion resistance with smooth spindle action. The instrument features hardened measuring faces (diameter 6.5 mm) that tolerate regular contact with workpieces and prolong service life, reducing downtime and maintenance interventions. Practical delivery and standards compliance Supplied in a protective transport case for safe handling and storage, the micrometre meets workshop demands for mobility and protection during transit. Constructed to DIN 863 guidance for micrometres, the tool integrates easily into existing inspection routines and documentation. The clear, labelled functions on the display make calibration checks and shift handovers straightforward, supporting traceable inspection records within a production environment. For precision checks across medium‑sized parts choose the Metav IndustryLine Digital Micrometer M302.261 and contact Metav Werkzeuge in Emmerich for tailored advice and prompt dispatch Technical Data Article number: M302.261 GTIN: 4054469151793 Manufacturer: Metav IndustryLine Category: Messschrauben (micrometres) Standard: DIN 863 Facts Measuring range: 175–200 mm Resolution / Display: 0.001 mm Measuring face diameter: 6.5 mm Customs tariff number: 90173000 Special features Digital display with ON/OFF/SET and ABS/INC/UNIT buttons Ratchet stop for reproducible measuring force Enamelled frame, matt chrome‑plated spindle Hardened measuring faces Supplied in a protective transport case FAQ What measurement accuracy can be expected with this micrometre? The Metav IndustryLine digital micrometre M302.261 provides a display resolution of 0.001 mm; its design and ratchet stop increase repeatability for routine inspection tasks. Is the device suitable for workshop use on medium‑sized components? Yes. The 175–200 mm range and robust construction make the instrument suitable for medium‑sized parts in machining and inspection environments. Which functions are available on the digital display? The digital readout features ON/OFF/SET and ABS/INC/UNIT controls, enabling quick zeroing, incremental measurements and unit selection on the M302.261. Are the measuring faces durable for daily use? The micrometre is fitted with hardened measuring faces (6.5 mm diameter) designed to withstand regular contact with workpieces and prolong service life. Does the instrument conform to recognised metrology standards? The instrument is manufactured to the requirements of DIN 863 for micrometres and is intended for integration into standard inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175–200mm Thread Micrometer With 175mm Setting Gauge 60° Supplied In Case - Metav IndustryLine
The combination of a wide 175–200 mm measuring range, a 0.01 mm vernier resolution and verified 0.014 mm accuracy ensures reliable thread inspections and repeatable results on production lines. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Thread Micrometer M309.098 – 175–200 mm, incl. 175 mm 60° setting gauge The Thread Micrometer M309.098 is a mechanical instrument for precise measurement of thread diameters and pitches in workshop and production environments Range 175–200 mm for larger threads Includes 175 mm 60° setting gauge Mechanical design with 0.01 mm scale Precision accuracy 0.014 mm Consistent and verifiable thread measurement for production The instrument provides a 175–200 mm measuring span that covers larger screw and bolt sizes frequently encountered in tooling, jigs and medium assemblies. With a vernier resolution of 0.01 mm and a guaranteed measurement accuracy of 0.014 mm, the device supports quality control routines where repeatability and traceability are essential. The mechanical readout simplifies adoption in inspection stations that require straightforward, analogue verification without reliance on electronics, enabling quick comparisons against master gauges. Engineered for repeatability and safe contact with threads Designed with a non-rotating measuring spindle and a measuring spindle diameter of 6.5 mm, the instrument reduces the risk of damaging delicate thread forms during contact measurement. The included 175 mm 60° setting gauge allows fast setting and functional checks before series measurement, shortening setup time and lowering process variance. The robust construction and the instrument’s mass (1.7 kg) contribute to stable measurement handling, which helps to keep operator-induced deviations to a minimum. Practical workshop integration and user benefits Classified within the Standard measurement range category (up to 300 mm), this micrometer suits general engineering, machine fitting and maintenance departments that need a reliable thread measuring tool with a good balance of reach and stiffness. The analogue operation is low-maintenance and field-serviceable, while the clear graduation supports rapid readings during sampling inspections. For environments that require straightforward, repeatable checks of external threads, this instrument delivers an efficient compromise between reach and measurement stability. Choose the Metav IndustryLine thread micrometer for dependable thread inspections and contact Metav Werkzeuge in Emmerich for technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M309.098 GTIN: 4054469118307 Label: Gewinde-Mikrometer, 175 - 200 mm inkl. Einstellmaß 175 mm 60° Facts Measuring range: 175–200 mm Resolution (vernier): 0.01 mm Accuracy: 0.014 mm Weight: 1.7 kg Measuring spindle diameter: 6.5 mm Special features Thread micrometer (mechanical) Non-rotating measuring spindle Includes 175 mm 60° setting gauge Analogue operation for direct readout FAQ Which thread types can be measured with this micrometer? The micrometer is designed for external thread diameter and pitch checks on standard metric threads and similar forms; the Thread Micrometer M309.098 is suitable for common workshop thread inspections. How precise are measurements with this instrument? Resolution is 0.01 mm and the stated accuracy is 0.014 mm, providing the repeatability expected for routine production and inspection tasks. Does the spindle rotate during measurement? No, the instrument features a non-rotating measuring spindle, which reduces the chance of damaging thread flanks during contact measurement. What is included for setting and checking? A 175 mm 60° setting gauge is supplied for quick zeroing and functional checks before measurement sequences. For which application class is this micrometer intended? With a 175–200 mm range, the tool sits in the Standard category and is optimised for machine‑shop and assembly inspection work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18-14 TPI Thread Insert, 55° Whitworth Thread Form - Metav IndustryLine
Take advantage of the combination of precise thread-form verification, a compact lightweight design and straightforward integration into existing thread-measuring setups for more reliable inspection results. Order the insert directly via Metav Werkzeuge or consult the specialists for application advice. Thread inserts M309.098.5 — 18–14 TPI, Whitworth 55° accessory A compact insert for Whitworth 55° thread verification, designed as an accessory for thread micrometers and workshop inspection stations Whitworth 55° thread form 18–14 TPI verification range Accessory for thread micrometers Compact 0.1 kg handling weight Precise verification for Whitworth threads The thread inserts supplied under SKU M309.098.5 are engineered to verify the characteristic profile of Whitworth 55° threads in the 18–14 TPI range. Focusing on geometry rather than material removal, these inserts act as a reference interface for comparative measurements on a thread micrometer or similar inspection tool. The defined 55° flank angle ensures the insert reproduces the original Whitworth profile, which simplifies visual checks and geometric confirmation during incoming inspection or quality control. Faster, more consistent measuring workflows Integrating this accessory into routine checks reduces handling complexity and supports a more predictable inspection sequence. The compact format and low mass (approx. 0.1 kg) make positioning and repeatability easier when working with small to medium batches. Used as part of a standard measuring procedure, the insert helps to cut cycle time for thread verification while increasing consistency between operators — an operational improvement that benefits throughput without requiring process redesign. Clear specification and practical compatibility The insert is specified for the 18–14 TPI range with the Whitworth 55° thread form, making it suitable where classic British Standard Whitworth threads must be checked or documented. As an accessory for thread micrometers and comparable gauges, it provides a stable reference surface for comparative assessment. The compact design supports ergonomic handling, and the accessory format allows straightforward replacement or addition to an inspection set without modification to existing measurement equipment. Contact Metav Werkzeuge for tailored application advice or to reserve this Whitworth 55° insert for immediate integration; Metav Werkzeuge is available from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M309.098.5 GTIN: 4054469118369 ECLASS: 21170324 Brand: Metav IndustryLine Facts Thread range: 18–14 TPI Flank angle: 55° Weight: 0.1 kg TARIC / HS code: 90173000 Special features For thread micrometers (accessory) Whitworth 55° thread form Category: Accessory for measuring devices Compact format for handling FAQ What thread standard is covered by these inserts? The inserts are made for the Whitworth 55° thread form and are specified to verify threads in the 18–14 TPI range for comparative inspection. Can these inserts be used with standard thread micrometers? Yes, the accessory is designed to function as an insert for thread micrometers and similar measuring devices to facilitate profile verification. What is the handling weight of the insert? The unit has a mass of approximately 0.1 kg, allowing ergonomic handling during repeated inspection tasks. Which identifying codes and SKU should be referenced when ordering? Reference SKU M309.098.5 and GTIN 4054469118369 for ordering and stock queries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1800mm Bench Micrometer With Colour Touchscreen, Wireless/USB Data, ISO 17025 Calibration Certificate - Microtech Metrology
Take advantage of the combination of a long 1,600–1,800 mm measuring range, integrated microcomputer functions and full ISO 17025 calibration for reproducible large‑part inspection and streamlined data capture. Order this instrument directly via Metav Werkzeuge or consult Metav’s advisers for application support. Micrometer 1,600–1,800 mm — Microtech Metrology, electronic with touchscreen The micrometer from Microtech Metrology is a long‑range electronic bench instrument designed for industrial quality control of large components, combining robust mechanical design with modern data connectivity. Large measuring range 1,600–1,800 mm Colour 1.5" touchscreen display Wireless and USB data output ISO 17025 calibration certificate included Precision for large components and reproducible workflows With a measuring range of 1,600–1,800 mm, this instrument belongs to the Long class of large‑range metrology and is intended for sizeable assemblies where profile stiffness and repeatability matter. The solid CNC‑machined aluminium housing and Ø50 mm measuring faces provide the mechanical stability needed to keep deflection low across the span, while the instrument’s stated accuracy of 0.024 mm supports routine inspection tasks and process control. This combination reduces the number of rework cycles and shortens inspection time on heavy‑duty parts. Industry 4.0 connectivity that saves time and prevents transcription errors Equipped with a 1.5" colour touchscreen and a comprehensive data stack, the instrument offers wireless transfer to the MDS app, HID modes and USB HID for direct capture into measurement databases. The built‑in memory manager stores up to 2,000 values with folder organisation and statistical export, while optional MODBUS RTU (RS‑485) supports PLC integration for automated lines. These features translate into fewer manual steps, faster reporting and immediate traceability for batch records. Calibrated delivery for reliable metrology and documented traceability The device is supplied with a calibration certificate performed to ISO 17025 (Ilac MRA), ensuring measurement results are traceable and acceptable for internal quality control or external audits. The presence of an ISO 17025 certificate and the instrument’s documented performance removes ambiguity about conformity and simplifies incorporation into quality systems. Regular calibration intervals and documented evidence support supplier audits and first‑article inspection routines. Intuitive operation tailored to workshop use Operational modes such as Go/NoGo, Max/Min, formula entry, timer, linear and temperature correction make the instrument immediately useful on the shop floor and in the inspection lab. The touchscreen interface presents analogue and graphic readouts, 2D graphing and probe modes to help visualise trends during manual measurement tasks. Rugged construction and clear on‑screen menus make the instrument suitable for single‑operator handling of large parts while maintaining consistent measurement technique. Contact Metav Werkzeuge in Emmerich for advice on integrating this Microtech Metrology micrometer into existing inspection routines or to request a tailored delivery and documentation package Technical data Article number: 110181808 GTIN: 4061905039829 Manufacturer: Microtech Metrology Type: Electronic bench micrometer Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Calibration: ISO 17025 certificate included Core specifications Measuring range: 1,600–1,800 mm Accuracy: 0.024 mm Measuring faces: Ø50 mm Weight: 16.2 kg Memory capacity: 2,000 values Features & functions CNC‑machined aluminium housing (solid block) Wireless MICROTECH instrument connection and synchronization Modes: Go/NoGo, Max/Min, Timer, Formula, Linear and temperature correction Data modes: Wireless to MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC, USB HID On‑line graphic, 2D graph, probe mode and compensation tools Optional MODBUS RTU (RS‑485) for industrial connections FAQ What is the measuring range and for which parts is it suitable? The micrometer offers a measuring range of 1,600–1,800 mm, making it suitable for large components such as heavy castings, housings and long shafts where long‑span stiffness and repeatability are required. Is the instrument delivered calibrated and with a certificate? Yes. The Microtech Metrology micrometer is supplied with a calibration certificate performed to ISO 17025 (Ilac MRA), providing traceable documentation for quality systems. Which data output options are available for process integration? Data transfer is possible via wireless connection to the MDS app, Wireless HID modes and USB HID; an optional MODBUS RTU (RS‑485) interface is available for PLC or industrial network integration. How much data can the device store and export? The instrument’s memory manager can hold 2,000 values in a folder system with statistics mode; stored data can be transferred wirelessly or via USB for analysis and archiving. What is the article number if a spare part or accessory is required? The article number (SKU) is 110181808 for ordering accessories or referencing documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com