Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
50mm Built-In Digital Micrometer Gauge Colour Touchscreen Wireless+USB ISO17025 - Microtech Metrology
Combining high‑precision measurement, extensive digital connectivity and an ISO 17025 calibration certificate, this built‑in micrometer supports reproducible quality control and streamlined data workflows. Benefit from compact bench use, wireless data transfer and a rugged CNC‑machined aluminium housing — order the device directly via Metav Werkzeuge or ask our consultants if needed. Built‑in micrometer by Microtech Metrology — Sub‑micron resolution, 2.4″ colour touchscreen The built‑in micrometer is a bench and laboratory instrument designed for inline diameter, thickness and form checks in production control, inspection benches and laboratory environments. Resolution 0.0001 mm display Accuracy 0.0025 mm specification Colour 2.4" touchscreen interface ISO 17025 calibration certificate included Traceable precision for process control The instrument delivers high‑resolution readouts (0.0001 mm) combined with a verified accuracy of 0.0025 mm, providing the numerical basis for consistent acceptance decisions and SPC routines. The included ISO 17025 calibration certificate confirms traceability to recognised standards, reducing audit effort and eliminating ambiguity during initial inspections. This combination of resolution and certified accuracy is particularly helpful where statistical process control and batch documentation are mandatory. Seamless data flow that fits Industry 4.0 Designed with modern workflows in mind, the unit supports wireless and USB data transfer, including multiple HID modes and a dedicated wireless connection to Microtech’s MDS app. The built‑in memory manager stores up to 2,000 values in foldered structures and offers statistical summaries, while MODBUS RTU (RS‑485) provides a path for PLC and networked measurement integration. These capabilities reduce manual transcription, accelerate reporting and enable near‑real‑time feedback from the measuring point to production IT. Practical bench design for routine inspection The device’s CNC‑machined aluminium housing combines rigidity with a compact footprint for bench or laboratory mounting. A 2.4″ colour touchscreen presents graphical modes — analog scale, max/min, go/no‑go and 2D graphs — making interpretation rapid for operators with varied experience. The instrument also offers linear and temperature correction functions to compensate environmental influences, so a stable measuring chain can be maintained without continual manual adjustment. Integration advantages and user ergonomics Beyond raw performance, the micrometer delivers workflow advantages: wireless probe modes, a 2D graphing function for profile checks and a timer/ formula feature for repeatable testing sequences. Memory export options (Windows, Android, iOS, macOS) simplify reporting and back‑office consolidation. For laboratories seeking to rationalise suppliers, the unit’s bench configuration, flexible data outputs and documented calibration support efficient on‑boarding into existing quality systems. For integration advice or to discuss a tailored configuration for production or laboratory use, contact Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 to plan the deployment of the Microtech built‑in micrometer (SKU 110180578) and related accessories Technical Data Article number: 110180578 GTIN: 4061905040740 Manufacturer: Microtech Metrology Facts Measuring range: 0–50 mm Resolution (display): 0.0001 mm Accuracy: 0.0025 mm Digital display: Colour 2.4" touchscreen Data output: Wireless, USB, MODBUS RTU (RS‑485) Calibration: ISO 17025 certificate included Special features CNC‑machined solid aluminium housing Memory manager: 2,000 values, folder system, statistics Modes: Analog scale, Go/No‑Go, Max/Min, 2D graph, Probe mode Connectivity: Wireless MDS app (Windows, Android, iOS, macOS), HID modes Bench configuration for laboratory use FAQ What measurement range does this device cover? The built‑in micrometer from Microtech Metrology covers a measuring range of 0–50 mm and is delivered as a bench‑mount instrument (SKU 110180578). Is a calibration certificate included with the instrument? Yes—the instrument is supplied with an ISO 17025 calibration certificate, confirming traceability and suitability for accredited quality processes. Which data transfer options are available? Data can be transferred wirelessly to the Microtech MDS app, via wireless HID, USB HID and MODBUS RTU (RS‑485), enabling direct integration into laboratory and production IT systems. How does the touchscreen support everyday use? The 2.4″ colour touchscreen provides intuitive access to analog scale, Max/Min, Go/No‑Go and 2D graph modes, which speeds up inspections and reduces interpretation errors for operators. Is the instrument suitable for Industry 4.0 integration? Yes—the Microtech built‑in micrometer (SKU 110180578) includes wireless synchronisation, MODBUS RTU output and extensive memory functions that support automated data capture and downstream analysis. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Built-In Digital Micrometer Head Rotating Spindle, Touchscreen 2.4" , IP65 - Microtech Metrology
The supplied product data contains a contradiction that prevents a reliable product description being produced: one entry describes the measuring spindle as rotating while another entry indicates the spindle does not rotate. This inconsistency directly affects the functional characterisation and the proper English technical term for the device, since whether the spindle rotates or remains fixed alters measurement technique, mounting details and intended applications. Please confirm the correct spindle behaviour (rotating or non‑rotating) and resubmit the clarified specification. Once the spindle function is verified, a complete, accurate and standards‑compliant product text — including calibrated status, IP rating, digital display details and data‑output options — can be produced for publication.
50mm Extension Ø15.5mm For Rod Internal Micrometer Sets - Metav IndustryLine
Take advantage of the 50 mm extension and Ø 15.5 mm shank to extend the reach of internal measuring sets while keeping handling straightforward; compatibility with sets 310.059/60/61/64 ensures flexible use across inspection tasks. Order the (Extension 50 mm, Ø 15.5 mm for 310.059/60/61/64) directly via (Metav Werkzeuge) or ask our consultants if needed. Extension 50 mm, Ø 15.5 mm for 310.059/60/61/64 — Metav IndustryLine accessory The Extension 50 mm, Ø 15.5 mm for 310.059/60/61/64 is an accessory for internal measuring sets, designed to increase measuring depth for internal measurements in tight or recessed bores 50 mm extension length, Ø 15.5 mm Fits sets 310.059/60/61/64 Lightweight 0.1 kg for easy handling More reach with reliable interface The 50 mm extension provides a straightforward method to extend the measuring range of internal rod micrometer sets without altering the base instrument. With a nominal shank diameter of Ø 15.5 mm, the extension interfaces directly with the matching holders in sets 310.059/60/61/64, preserving alignment and repeatability. This accessory is intended to enable internal measurements in deeper bores where the standard rod length limits access, improving workflow flexibility in routine inspection tasks. Practical benefits for inspection workflows At a weight of only 0.1 kg, the extension adds minimal burden to the measuring assembly and remains easy to handle during serial inspections. The compact increase in reach helps avoid time-consuming setup changes or the need for alternate instruments when inspecting components with recessed features. By integrating the extension into existing internal measuring sets, measurement processes become more efficient while maintaining the original calibration and traceability of the base system. Traceability and workshop integration Delivered under the Metav IndustryLine range and stocked with clear identifiers, the accessory integrates into inventory and documentation systems with ease. The product is supplied with the listed SKU and GTIN for unambiguous ordering and record keeping, supporting quality management and audit trails in production and inspection departments. As an accessory classified in the measurement equipment category, it complements standard internal measuring toolkits and reduces the need for separate special-length rods. Contact Metav Werkzeuge to confirm fitment with current internal measuring sets and to request immediate delivery or further technical clarification from their Emmerich warehouse. Technical data Article number: M310.061.3 GTIN: 4054469118888 Weight: 0.1 kg Tariff number: 90173000 ECLASS: 21019104 ETIM: EC002219 Facts Extension length: 50 mm Shank diameter: Ø 15.5 mm Category: Zubehör SKU: M310.061.3 Special features Compatible with sets 310.059/60/61/64 Accessory for internal measuring (rod) sets Storytrigger: Zubehör FAQ Is the extension compatible with set 310.059? Yes. The extension is compatible with set 310.059 and the related sets 310.060, 310.061 and 310.064; it is intended to fit the same Ø 15.5 mm interface. Will the extension affect calibration status of the measuring set? Using the extension does not change the calibration certificate of the base instrument; calibration of the complete measuring chain should be checked according to the workshop's quality procedures when new combinations are introduced. What is the exact length and diameter of the accessory? The accessory provides a 50 mm extension and a Ø 15.5 mm shank, matching the dimensions required by the listed internal measuring sets. How is the item identified for ordering and stock control? The accessory is listed under SKU M310.061.3 and GTIN 4054469118888 for unambiguous ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Extension Ø28mm For Rod Interior Micrometer Sets - Metav IndustryLine
Take advantage of the precise 50 mm increase in reach and the standard Ø 28 mm shank to access deeper bores without changing measuring rods; the extension improves setup flexibility while maintaining secure fit and repeatability. Order the extension directly via Metav Werkzeuge or contact our consultants for specification advice. 50 mm extension M310.066.2 – 50 mm length, Ø 28 mm shank The 50 mm extension M310.066.2 provides a simple, compatible solution to increase the reach of rod internal measuring sets for confined or deep internal measurements. 50 mm nominal increase in reach Ø 28 mm shank for secure fitting Compatible with 310.065 / 310.066 / 310.067 Robust, workshop-suitable construction Improved access for internal measurement tasks The extension delivers a clear operational advantage when internal workpieces require an increased measuring depth. By adding a 50 mm length to the existing rod stack the toolset gains reach without altering measurement methodology, which reduces changeover time and handling complexity. The extended reach is particularly useful in deep bores, stepped interiors and fixtures where swapping to a different rod would interrupt production flow. The defined Ø 28 mm shank ensures a consistent mechanical interface that preserves alignment and repeatability. Stable connection and consistent repeatability A secure connection between extension and measuring rod matters for reproducible results. The part’s Ø 28 mm interface and robust construction offer a stable mechanical link that resists twist and lateral play during measurement sequences. The unit’s mass (6 kg as specified) contributes to stable handling during manual operations and can reduce susceptibility to minor vibrations in bench-mounted setups. These characteristics help to maintain measurement integrity across repeated cycles and support efficient quality control routines. Seamless integration with existing rod sets Compatibility with models 310.065, 310.066 and 310.067 permits straightforward integration into existing tool inventories. Installation requires no special adapters: the extension couples directly to the rod stack, preserving nominal alignment and enabling quick configuration changes. This approach reduces the number of dedicated rods kept in stock and streamlines inventory management, thereby supporting leaner workshop logistics. Traceable identification and workshop logistics The accessory is ready for industrial use and supplied with clear identifiers for procurement and inventory: SKU M310.066.2 and GTIN 4054469160955. The customs tariff is listed as 90173000, facilitating import and documentation. Classified as an accessory within metrology equipment, the extension is suited to machine shops and inspection departments that require dependable reach extensions without redesigning measuring procedures. Order the Metav IndustryLine 50 mm extension M310.066.2 via Metav Werkzeuge for rapid procurement and expert guidance—contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support Technical data Article number: M310.066.2 GTIN: 4054469160955 Label: 50 mm extension for 310.065, 310.066, 310.067 SKU: M310.066.2 Core measurements Length: 50 mm Shank diameter: Ø 28 mm Weight: 6 kg Tariff code: 90173000 Compatibility & features Compatible with 310.065 / 310.066 / 310.067 Category: Accessory (metrology) eClass: 21019104 ETIM: EC002219 Extension designation: 50xØ28 FAQ Is this extension compatible with existing rod internal micrometer sets? Yes. The 50 mm extension M310.066.2 is designed for direct compatibility with the 310.065, 310.066 and 310.067 rod internal measuring sets and attaches to the standard Ø 28 mm shank. What length and shank diameter does the extension provide? The accessory provides a 50 mm additional length and a shank diameter of Ø 28 mm, offering extended reach while maintaining the original rod interface. Will the extension affect measurement repeatability? When fitted correctly to the matching rod set the extension maintains alignment and helps preserve repeatability; the secure Ø 28 mm connection reduces lateral play and supports consistent measurement cycles. Which identifiers are useful for procurement and inventory? Use SKU M310.066.2 and GTIN 4054469160955 for ordering and inventory control; the customs tariff number is 90173000 for import documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Extension, Ø22mm For Rod Internal Micrometer Sets - Metav IndustryLine
Take advantage of the extended reach and precise fit of this accessory — 50 mm added length and a 22 mm diameter deliver reliable access into deeper bores while preserving concentricity. Lightweight and purpose-made for internal measuring sets, the extension improves efficiency in repetitive inspection tasks. Order the extension directly via Metav Werkzeuge or consult our specialists for fitment advice. Extension 50 mm, Ø 22 mm — Probe extension for internal measuring sets (Metav IndustryLine) The Extension 50 mm, Ø 22 mm is an accessory designed to extend the reach of rod-type internal measuring instruments for measurements in deeper bores and assemblies. *Compatibility with 310.062/310.063 kits *Precision-machined Ø 22 mm shaft *Adds 50 mm reach for deep bores Reach deeper bores without extra dismantling The 50 mm probe extension increases the effective measuring length so confined or recessed bores can be checked without dismantling assemblies, reducing downtime and handling. Fitted as an extension sleeve to rod-style internal gauges, this component preserves alignment and enables repeatable access where standard probes fall short. The practical result is fewer set‑ups and a more continuous inspection workflow, contributing to faster throughput in production and quality control. Precision fit for consistent measurements Manufactured to tight tolerances, the Ø 22 mm shaft ensures a snug, concentric connection with the mating instrument, which minimises radial play and measurement scatter. A precision-machined interface supports stable seating and repeatability across multiple cycles, which is crucial for comparative checks and batch inspection. The engineered fit lowers the risk of measurement error caused by loose couplings, ensuring the extension behaves as a transparent increase in reach rather than an added variable. Simple integration into workshop routines Designed as a direct accessory for the 310.062 and 310.063 internal measuring sets, the sleeve is lightweight and easy to handle, helping operators to change probes quickly and safely. The compact accessory is suited to routine metrology tasks where a modest increase in reach is required; it complements existing kits without altering calibration procedures. For traceable workflows, Metav provides full product identification and documentation to support inventory and process control. Choose the Metav IndustryLine 50 mm extension for reliable extension of internal measuring probes and contact Metav Werkzeuge in Emmerich for tailored advice and fast supply. Technical data Article number: M310.063.2 GTIN: 4054469118963 Label: Verlängerung 50 mm, D=22 mm für 310.062/310.063 Manufacturer: Metav IndustryLine Weight: 0.1 kg Tariff number: 90173000 Facts Length: 50 mm Outer diameter: 22 mm Weight: 0.1 kg Special features Compatibility: for 310.062 / 310.063 Application: extension for internal measuring sets Category: Accessory (measuring instruments) eClass: 21019104 ETIM: EC002219 FAQ Can this extension be used with both 310.062 and 310.063 sets? Yes. The extension is specified for compatibility with the 310.062 and 310.063 rod-style internal measuring sets and fits their mating interfaces. Does the extension affect measurement accuracy? When correctly installed, the extension preserves the measuring chain; the precision fit of the Ø 22 mm shaft minimises additional error and supports repeatable results. What is the added reach provided by this accessory? The sleeve increases probe length by 50 mm, enabling access to deeper bores without altering the core instrument geometry. What is the product SKU for ordering or stock control? The SKU is M310.063.2 and can be referenced when ordering the 50 mm extension from Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Gauge Block Thread Setting 55° For Whitworth Or Metric Inserts 0.02kg - Metav IndustryLine
Take advantage of a compact 50 mm reference that delivers reproducible thread checks and simplifies set-up for thread micrometers; choose the 55° profile for Whitworth applications or the 60° option for standard inserts. Order the setting gauge directly via Metav Werkzeuge or consult the specialists for application advice. Setting gauge 50 mm — 55° thread micrometer accessory (Metav IndustryLine) The Setting gauge 50 mm is a compact reference standard designed to reproduce thread profiles for thread micrometers, suitable for Whitworth (55°) and ISO-style (60°) thread inserts in workshop and inspection environments. 55° profile for Whitworth thread inserts 50 mm gauge length, compact and stable Precision reference for thread micrometers Workshop accessory for thread verification Ensure reproducible thread checks with a compact reference A compact 50 mm reference block provides a stable datum for setting and checking thread-measuring inserts. By using a fixed profile rather than a temporary workpiece, set-up variation is reduced and the thread micrometer can be aligned more quickly and consistently. This benefit translates into shorter set-up times at the bench and fewer scrap parts during initial trials, supporting efficient small-batch and series production. Accurate profile geometry for reliable measurements The profile geometry is available as 55° for Whitworth-type inserts or as a 60° option for common metric profiles. This tailored geometry ensures that the measuring insert contacts the gauge in the same manner as the actual thread form, producing a precision reference that helps avoid systematic measurement offsets. The result is greater confidence in inspection reports and improved process control in the workshop. Practical design that fits routine metrology workflows With a compact footprint and robust form, the gauge integrates easily into ordinary inspection routines. The modest size supports rapid handling and keeps the measuring faces free from accidental deformation during use. As an accessory for dedicated thread micrometers, the gauge supports quick verification cycles and reduces downtime between measurements, contributing to a smoother production flow. Suitable applications and typical use cases Ideal for toolrooms, QC benches and maintenance departments, this gauge is intended for verifying thread-measuring inserts, setting micrometer anvils and performing quick functional checks before measuring critical components. The accessory is particularly useful where repeatability is required across multiple operators, as the fixed profile reduces the influence of individual handling on the measurement outcome. For a reliable workshop standard, request the Metav IndustryLine setting gauge via Metav Werkzeuge in Emmerich or consult our specialists by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M309.091.1 GTIN: 4054469118116 eClass: 21170102 Customs tariff number: 90173000 Facts Gauge length: 50 mm Profile angle: 55° Category: Accessory (Zubehör) Story trigger: Zubehör Special features 55° for Whitworth thread inserts or 60° for standard thread inserts Suitable as reference for thread micrometers Compact design for workshop and inspection use FAQ What is the primary purpose of this setting gauge? The setting gauge serves as a precision reference for aligning and checking thread-micrometer inserts; it reproduces the required profile so the instrument can be set up reproducibly. Which profile does the gauge provide? The delivered version features a 55° profile suitable for Whitworth-type inserts; a 60° option is available for standard metric-style thread inserts. Can this gauge be used for routine verification on the shop floor? Yes—its compact form and stable profile make it suitable for regular verification and quick functional checks on the shop floor with thread micrometers. Is the gauge compatible with all thread micrometer brands? The gauge is intended as a profile reference for inserts and is compatible wherever the insert geometry matches 55° (Whitworth) or 60° profiles; integration depends on matching insert form rather than micrometer brand. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Micrometer Caliper, Antimagnetic, Hardened Measuring Faces, Friction Ratchet, Case - Metav IndustryLine
Take advantage of accurate, repeatable external measurements thanks to hardened measuring faces and a friction ratchet that prevents over‑torque. The anti‑magnetic construction and matt chrome‑plated thimble ensure dependable performance in metalworking environments. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Micrometer M304.709 — analog micrometer with friction ratchet and anti‑magnetic design (25–50 mm) A Micrometer M304.709 for precise external diameter measurements in mechanical engineering and fine workshop applications. Anti‑magnetic body for interference‑free measuring Hardened special steel measuring faces for durability Friction ratchet for consistent measuring pressure Matt chrome‑plated thimble for clear reading and wear resistance Precision and repeatability for production work The micrometer combines a fine reading of 0.01 mm with a spindle pitch of 0.5 mm, which yields reliable graduations on the thimble and enables fast, exact readings on the analogue scale. The hardened measuring faces in special steel preserve true contact geometry over many cycles, reducing wear‑induced error and keeping measurements within the repeatability demanded in production. Compliance with DIN 863 underlines suitability for workshop quality control, where reproducible external measurements are essential for assembly and inspection tasks. Consistent handling and long‑term robustness Built for repeated use on the shop floor, the instrument’s friction ratchet delivers a constant contact force to avoid measurement scatter caused by varying operator torque. The matt chrome‑plated measuring drum resists glare and surface wear, allowing clear observation of the scale during routine checks. The anti‑magnetic attribute protects the measuring process from magnetic interference in environments with electric motors or magnetic materials, while the compact, balanced form factor supports steady one‑hand operation and reliable ergonomics during serial measuring. Workshop advantage and Metav reliability As part of the Metav IndustryLine, this measuring screw is engineered for practical workshop integration: low maintenance, durable materials and a handling concept that reduces operator‑related variability. The combination of hardened faces, anti‑magnetic construction and a tactile friction mechanism makes it a sensible choice where reliable external measurement and operational consistency outweigh cosmetic features. Metav’s long experience in metrology and a broad product range provide a dependable supply chain and technical competence for industrial customers. For traceable workshop precision, select the Metav IndustryLine micrometer M304.709 and contact Metav Werkzeuge in Emmerich for individual advice and rapid delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: M304.709 GTIN: 4054469167039 Tariff number: 90173000 Facts Measuring range: 25–50 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Weight: 0.3 kg Standard: DIN 863 Special features Anti‑magnetic Hardened special steel measuring faces Friction ratchet for uniform measuring force Matt chrome‑plated measuring drum Analogue thimble reading FAQ What measuring range does this micrometer cover? The micrometer covers the 25–50 mm measuring range and is supplied as the analogue workshop instrument M304.709. How fine is the reading on the scale? The instrument provides a 0.01 mm reading on the thimble, offering the resolution commonly required for standard workshop inspections. Does the friction ratchet improve measurement consistency? Yes, the friction ratchet ensures a uniform contact force, reducing operator‑induced variation and improving repeatability for serial measurements. Are the measuring faces wear‑resistant? The measuring faces are made of hardened special steel, which maintains contact geometry and resists wear under frequent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Mounting Dial Indicator Large 29mm Drum, 8mm Spindle, 1mm Pitch, Ratchet, DIN 863 - Metav IndustryLine
Take advantage of the combination of precise mechanical measurement, wear‑resistant spindle technology and a large, easy‑to‑read thimble for reliable inset measurement tasks; order the M303.162 via Metav Werkzeuge or consult our specialists for integration advice. M303.162 inset micrometer head — 50 mm range, large 29 mm thimble, carbide spindle The M303.162 is an inset micrometer head designed for integration into jigs, fixtures and measuring stations where compact, repeatable linear measurement is required. 50 mm measuring range 29 mm large thimble Carbide spindle, 8 mm diameter Ratchet stop for constant force Precision and readable performance for production use This inset micrometer head delivers a 50 mm measuring range with a mechanical reading of 0.01 mm, offering a balance between reach and fine resolution that suits both workshop and bench‑level quality control. The carbide spindle provides superior wear resistance, so the measuring face retains form under frequent contact; combined with the plane‑parallel measuring faces, this reduces tilting and improves repeatability. Compliance with DIN 863 signals industry‑standard tolerances and makes the unit straightforward to specify in drawings and inspection plans. Designed for integration and reliable handling The unit’s large thimble (29 mm) improves legibility and handling when mounted in confined stations, while the 1 mm spindle pitch gives a predictable linear advance per revolution, helpful when setting stops or calibrating travel. A built‑in ratchet stop ensures consistent measuring force, limiting operator‑induced variation during contact. The compact inset layout simplifies installation into retaining frames or adaptor blocks and helps maintain alignment in repetitive measurement cycles. Durable components and application suitability Manufactured with an 8 mm spindle and a focus on robust contact geometry, this measuring head is suited to fixtures used in small‑batch production, gauge assemblies and toolroom jigs. The combination of a hard wearing spindle surface and analog reading makes the unit serviceable in environments where electronic outputs are unnecessary or where a classic mechanical indicator is preferred. Its features support repetitive inspection tasks and prolong service life under regular use. For machine‑side measurement tasks that demand longevity and clear mechanical readings, choose the Metav IndustryLine M303.162 inset micrometer head — contact Metav Werkzeuge for specification checks or to arrange supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M303.162 GTIN: 4054469115764 ECLASS: 21170330 ETIM: EC003590 Norm: DIN 863 Facts Measuring range: 0–50 mm Reading / resolution: 0.01 mm Spindle pitch: 1 mm Spindle diameter: 8 mm Thimble diameter: 29 mm Special features Carbide spindle Plane‑parallel measuring faces Ratchet stop Analog operation Built‑in/inset design FAQ What measuring range does this unit cover? The M303.162 inset micrometer head covers a measuring range of 0–50 mm, suitable for compact fixture applications. What resolution and standard does the micrometer use? This model offers a mechanical reading of 0.01 mm and is specified in accordance with DIN 863 for traceable mechanical performance. Is the spindle material corrosion‑resistant and wear‑proof? The spindle of the M303.162 is made with a carbide contact surface to provide enhanced wear resistance for extended service life. How does the ratchet stop help in daily use? The integrated ratchet stop ensures a consistent measuring force on each contact, reducing variation caused by different operator pressure. Can this head be integrated into a jig or fixture? Yes, the inset design of the M303.162 is intended for installation in jigs, gauges and dedicated measuring fixtures where compact, repeatable measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Setting Gauge Whitworth 55 Thread Standard - Microtech Metrology
Built for dependable Whitworth thread set-up, the compact 50 mm gauge pairs accurate 55° thread geometry with workshop-ready robustness for consistent results. Order the setting gauge directly via Metav Werkzeuge or consult our advisors for specification support. Thread setting gauge — 50 mm Whitworth 55° by Microtech Metrology A compact, workshop-ready thread setting gauge with Whitworth 55° geometry for rapid, repeatable thread set-up and inspection. 50 mm compact setting gauge Whitworth 55° thread geometry For thread set-up and inspection Microtech Metrology SKU 110720005 Reduce set-up time with repeatable geometry The compact tool is engineered to provide a consistent reference for thread preparation and verification. Using a precisely formed Whitworth 55° profile, the gauge removes guesswork during machine set-up and hand-fitting operations, enabling faster cycle starts and fewer trial cuts. As a workshop accessory it supports predictable results, which translates into reduced rework and improved production throughput. The 50 mm length keeps handling simple without compromising the defined thread profile. Compact shape that suits tight fixtures and benches Designed for constrained spaces, the 50 mm form factor makes the gauge easy to position in vises, chucks or bespoke fixtures. The small footprint helps when working on subassemblies or when access is limited, while retaining the full thread geometry required for reliable alignment. This compactness also aids storage and transport between workstations, making the instrument a practical reference for both maintenance and series production environments. Built for practical inspection and workshop use Delivered as a straightforward accessory, the unit complements thread-cutting and inspection workflows by providing a fixed reference rather than a variable measurement. Traceable identification via SKU and GTIN supports inventory and quality records, while the association with Microtech Metrology signals a focus on metrology-grade manufacturing. The gauge is intended to integrate into existing setup routines, helping technicians achieve consistent thread form without additional calibration steps specified in the product data. For reliable Whitworth thread set-ups and to discuss compatibility with existing tooling, contact Metav Werkzeuge in Emmerich or request advice from our technical consultants at info@metav-werkzeuge.com Technical Data Article number: 110720005 GTIN: 4061905459313 Brand: Microtech Metrology Core data Length: 50 mm Thread angle: 55° Special features Whitworth 55° thread geometry Category: Zubehör Image available: 110710005-main.png FAQ What is the primary purpose of this gauge? The thread setting gauge is a dedicated reference for establishing and checking Whitworth 55° thread form during machine set-up and inspection, ensuring consistent thread geometry. Which thread standard does it match? This item reproduces the Whitworth 55° profile; it is suited to applications that require that specific thread angle and form and is listed under Microtech Metrology SKU 110720005. Can the gauge be used in confined spaces? Yes, the 50 mm length is intentionally compact to facilitate positioning in tight fixtures, chucks and on small workpieces while maintaining the full thread profile. Is additional calibration required before use? The product is supplied as a reference accessory; customers should follow internal quality procedures to determine whether a supplementary calibration certificate is required for their traceability records. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thread Gauge Setting Tool 60° For Thread Micrometer, 0.02kg - Metav IndustryLine
Take advantage of a compact, workshop-ready reference that ensures consistent thread micrometer settings and clear compatibility with both 60° and Whitworth geometries; order directly via Metav Werkzeuge or ask the consultants for application advice. Setting gauge 50 mm for thread micrometer – Metav IndustryLine accessory (60° geometry) A Setting gauge 50 mm for thread micrometer serves as a precise reference standard for setting and verifying thread micrometers and thread inserts in a production or inspection environment, suitable where repeatable adjustment and clear angle compatibility are required. 50 mm reference for thread micrometers 60° geometry; 55° option for Whitworth Compact and lightweight at 0.1 kg Accurate reference that reduces set-up error A calibrated reference dimension is the most effective way to limit operator-induced variation during micrometer setup. The 50 mm datum on this accessory provides a measurable, repeatable standard that simplifies comparison readings and shortens adjustment cycles. With a defined 60° flank angle (or 55° for Whitworth-type inserts), the gauge matches common thread form geometries so that adjustments on thread micrometers are directly comparable to the intended thread profile. This measurable approach translates into fewer reworks and a more consistent first-pass yield. Designed for practical workshop use Small, robust and easy to handle, the gauge’s compact footprint and 0.1 kg mass make it convenient to store alongside hand tools and measuring equipment without adding significant handling time. The accessory format supports quick insertion into routine checks and set-up sequences, enabling faster throughput on production lines and in inspection bays. Clear geometry marking reduces interpretation time and supports operators with varying experience levels, creating operational efficiency without relying on additional consumables. Traceable identification and integration into existing workflows The setting gauge is identifiable by SKU M309.097.1 and GTIN 4054469118246, facilitating inventory control and traceability in quality documentation. As a specialist accessory for thread micrometers, it dovetails with standard inspection routines and works alongside existing measurement equipment to establish a reproducible baseline. Metav IndustryLine’s supply chain in Emmerich acts as a quality filter for the European market, offering the reliability and product range that support workshop consolidation and long-term availability. Contact Metav Werkzeuge GmbH in Emmerich to confirm the correct angle variant (60° or 55° Whitworth) and to secure the M309.097.1 setting gauge for immediate integration into inspection and set-up procedures; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M309.097.1 GTIN: 4054469118246 Label: Einstellmaß 50 mm für Gew.-Mikro, 60° 0,02 kg Weight: 0.1 kg Setting dimension: 50 mm Angle: 60° Facts Customs tariff number: 90173000 SKU: M309.097.1 Mass value: 50 Special features 60° for thread inserts or 55° for Whitworth thread inserts Accessory for thread micrometers Category path: Messgeräte > Zubehör FAQ What is the primary use of this setting gauge? The setting gauge M309.097.1 is used as a precise reference to set and verify thread micrometers, ensuring correct alignment with the intended thread flank geometry. Does the gauge support Whitworth thread forms? Yes, the item is available with a 55° variant for Whitworth thread inserts; the standard version is 60° for common thread inserts. What are the physical dimensions and weight of the gauge? The gauge provides a 50 mm reference dimension and weighs 0.1 kg, designed for compact workshop handling. Is the gauge suitable for routine inspection workflows? The accessory is intended for integration into standard set-up and inspection procedures, offering a repeatable baseline for micrometer adjustments and traceability. How is the product identified for inventory and traceability? Identification is via SKU M309.097.1 and GTIN 4054469118246, which supports documentation and inventory control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–100mm Digital Three-Point Internal Rapid Gauge, 4x Digital Heads, Rotating Display, RB6 & Bluetooth, Supplied in Case - Metav IndustryLine
Reliable, high‑speed internal measurements with 0.005 mm repeatability and wireless data transfer via RB6 and Bluetooth ensure efficient inspection cycles; supplied with four interchangeable measuring heads and protected in a transport case. Order the digital three‑point internal gauge set directly via Metav Werkzeuge or ask our consultants if needed. Digital three-point internal rapid gauge M312.347 — 50–100 mm, 0.005 mm accuracy (Metav IndustryLine) The Digital three-point internal rapid gauge M312.347 is a compact, workshop-focused instrument set for fast, traceable internal diameter checks and blind‑hole inspections in the 50–100 mm range. Digital three-point internal gauge set 50–100 mm measurement range 0.005 mm accuracy for precise control Rotating display 330° & RB6 + Bluetooth Faster inspection for blind holes and bores The three‑contact measuring concept delivers repeatable centring inside bores and blind holes, reducing setup time compared with single‑point probes. With a usable range of 50–100 mm, the set bridges gauge sizes commonly required in component assembly and maintenance. The rapid measuring heads are designed for quick interchange, which shortens measurement cycles and keeps throughput high on the shop floor. The instrument’s form factor supports stable engagement in confined bores, so measurements are both reliable and efficient. Traceable readings and seamless data capture Electronic readout with a resolution of 0.001 mm captures small deviations reliably; combined with a specified accuracy of 0.005 mm, this allows tight tolerance verification in production‑level quality control. The digital display offers ON/OFF, SET, CAL, INC, PRESET, HOLD, mm/inch and TOL functions for immediate adaptability to inspection tasks. Integrated RB6 output and Bluetooth enable direct data transfer to SPC systems or mobile devices, reducing transcription errors and speeding reporting. Battery operation uses a 3 V CR2032, ensuring simple field replacement and long service intervals. Ergonomics and workshop practicality A 330° rotating display keeps readings visible regardless of measuring orientation, improving operator ergonomics and reducing measurement retries. The set is supplied complete with four interchangeable measuring heads and is delivered in a protective transport case to safeguard the instrument during storage and movement. At a practical weight for a complete kit, the set is robust enough for shop environments yet portable for bench or in‑machine checks. The compact design helps maintain steady contact force and repeatability during interior measurements. Where this set adds value in production Ideal for machine shops, tool rooms and assembly inspection stations, the set shortens inspection loops on blind‑hole bores, housings and fitted components. The combination of quick three‑point probing, high resolution and wireless data output supports inline or batch inspection strategies and simplifies integration into digital quality workflows. Backed by Metav IndustryLine sourcing and distribution from Emmerich, the kit benefits from a dependable supply chain and a broad spare‑parts network for long‑term use. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine three‑point internal gauge and to arrange a purchase or technical consultation Technical data Article number: M312.347 GTIN: 4054469181691 Weight: 4.43 kg Measuring range: 50–100 mm Accuracy: 0.005 mm Power supply: 3 V CR2032 Numbers / Core technical data Resolution: 0.001 mm Measuring range min: 50 mm Measuring range max: 100 mm Pieces per set: 4 Mass: 4.43 kg Special features / Versions Digital three‑point measuring principle Rotating display 330° Digital display functions: ON/OFF, SET, CAL, INC, PRESET, HOLD, mm/inch, TOL Data output: RB6 and Bluetooth Supplied in protective transport case Contents: one measuring instrument + four measuring heads (no ring, no extension) Suitable for measurement of blind‑hole bores FAQ What measuring range does the set cover? The set covers a measuring range of 50–100 mm and is intended for internal diameter checks and blind‑hole inspections. How precise are the readings from the instrument? The instrument provides a resolution of 0.001 mm with an accuracy of 0.005 mm, suitable for tight tolerance checks in workshop quality control. Which data interfaces are available for data capture? The gauge supports RB6 output and Bluetooth for wireless transfer to data collectors or SPC systems. Is the display adjustable for different measuring positions? Yes — the display rotates through 330°, ensuring clear visibility in confined or awkward measuring orientations. What is included in the delivery? The delivery comprises one measuring instrument and four interchangeable measuring heads; a protective transport case is provided. A ring or extension is not included. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–63 mm Three-Point Internal Measuring Gauge With Carbide Measuring Faces, Setting Ring, DIN 863 - Metav IndustryLine
Take advantage of the combination of three-point measurement, hard‑metal measuring faces and high repeatability for reliable bore inspection. Order the instrument directly via Metav Werkzeuge or consult the specialists for application advice. Three-point internal micrometer M312.160 — inside micrometer with carbide faces, 50–63 mm Three-point internal micrometer M312.160 designed for precise measurement of internal diameters and blind bores in workshops and inspection rooms Three-point contact for secure centring Carbide measuring faces for wear resistance Measuring range 50–63 mm for small bores Includes setting ring 62 for quick calibration Consistent, measurable precision for bore inspection The instrument delivers repeatable internal measurements thanks to its three-point contact geometry, which centres automatically in the bore and reduces tilting errors. With a reading of 0.005 mm and an indicated accuracy of ±0.005 mm, measurable tolerances for small-diameter bores can be controlled with confidence. The analogue design follows DIN 863, providing a familiar measuring routine for technicians and quality inspectors; the supplied setting ring 62 enables a straightforward reference adjustment before series inspections. Robust contact surfaces and practical handling The measuring faces are made from hard‑metal (carbide) to resist wear during repeated use in production and inspection environments, extending service life and preserving measurement integrity. The matt‑chrome scale and vernier improve legibility under workshop lighting while resisting glare. The compact footprint and precise contact geometry make the instrument particularly suitable for narrower bores and blind‑hole checks, where dependable centring and stable contact are essential for reproducible results. Designed to reduce rework and speed up inspection routines By combining centring reliability with hard-wearing contact faces and a quick reference setting, the device shortens set‑up times and reduces the risk of false rejects. Traceable measurement practice is supported by the instrument’s compliance with established standards, which simplifies documentation in quality control processes. For applications in maintenance, small series production or toolroom inspection, the micrometer provides a pragmatic balance of accuracy and robustness that helps to keep production running smoothly. Discuss suitability for specific bore tasks with Metav Werkzeuge in Emmerich; technical advice and delivery coordination are available from the Metav team via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M312.160 GTIN: 4054469119670 ETIM: EC003590 eClass: 21170335 Norm: DIN 863 Facts Measuring range: 50–63 mm Reading: 0.005 mm Indicated accuracy: ±0.005 mm Length: 114 mm Analogue instrument Special features Carbide (hard‑metal) measuring faces Setting ring: 62 Suitable for blind‑hole (sackloch) measurements Scale and vernier matt chrome‑plated Extensions: 150 x Ø23.4 FAQ How is centring achieved with this inside micrometer? Centring is achieved by the three‑point contact geometry of the instrument, which self‑aligns in the bore to reduce tilting and produce consistent readings with the Metav IndustryLine three‑point internal micrometer (M312.160). Can blind holes be measured with this instrument? Yes, the design is suitable for blind‑hole measurements and the product specification explicitly states compatibility with blind bores. What is the smallest increment visible on the scale? The vernier provides a reading of 0.005 mm, ensuring fine resolution for close‑tolerance checks on small diameters. Is the instrument robust enough for regular workshop use? The hard‑metal measuring faces and matt‑chrome scale are selected to withstand frequent handling and maintain measurement integrity in workshop environments. Does the micrometer require a reference ring for calibration? A setting ring 62 is specified and included for quick reference adjustment before inspections; routine calibration should follow the organisation’s quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–63mm Three-Point Internal Micrometer 0.001mm Resolution With Setting Ring And Extension In Case - Metav IndustryLine
Benefit from sub‑micrometre resolution combined with a robust three‑point contact system for repeatable blind‑hole inspections; the supplied setting ring and extension simplify setup and reduce measurement variation. Order the Three‑point internal micrometer directly via Metav Werkzeuge or consult the specialists for application advice. Three‑point internal micrometer M312.460 — 50–63 mm, 0.001 mm resolution (Metav IndustryLine) The Three‑point internal micrometer M312.460 is a purpose‑built gauge for precise internal diameter checks, optimised for blind‑hole and bore inspection in production and quality control environments. Three‑point contact for centred internal measurement Resolution 0.001 mm for fine discrimination Includes setting ring Ø62 mm for traceable zeroing Extension 152.4 mm × Ø23.5 mm for blind holes Precision where blind‑hole inspection must be reliable The M312.460 combines a stable three‑point contact geometry with a fine 0.001 mm resolution, delivering measurements that are both repeatable and sensitive enough for narrow tolerances. With a stated accuracy of ±0.005 mm, the instrument is classified in the micro range and is particularly suited to fine mechanical and component inspection where centred contact prevents tilting and off‑axis errors. The matt‑chrome scale and vernier improve legibility under workshop lighting while resisting surface wear, which helps preserve long‑term measurement integrity. Designed for repeatable setups and traceable zeroing Built‑in features such as the Ø62 mm setting ring allow straightforward verification and reproducible zeroing before a measuring run, cutting setup time and reducing measurement scatter between operators. The supplied extension (152.4 mm × Ø23.5 mm) makes the gauge practical for deeper blind bores where standard anvils would not reach, maintaining contact stability throughout the stroke. These attributes translate into faster quality checks, fewer rework cycles and a clearer audit trail in serial inspection tasks. Practical handling tailored to workshop routines Ergonomics and robustness matter in daily use: the instrument’s mass and construction provide a steady feel during measurement and make it less sensitive to hand tremor. The presence of defined measuring faces ensures consistent contact geometry, and the gauge’s form factor supports convenient handling on a busy inspection bench. For operations that require a documented chain of measurement, the combination of fine resolution and practical setup aids supports reliable decisions in production control and acceptance testing. Contact Metav Werkzeuge for a specification review or to request accessory options for the Metav IndustryLine three‑point internal micrometer M312.460; our specialists in Emmerich will advise on application fit and setup requirements Technical data SKU: M312.460 GTIN: 4054469182216 Manufacturer: Metav IndustryLine Weight: 3.4 kg Material: Scale and vernier matt chrome‑plated Measuring range: 50–63 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Setting ring: Ø62 mm Extension: 152.4 mm × Ø23.5 mm Core specifications Measuring range min: 50 mm Measuring range max: 63 mm Resolution (display/readout): 0.001 mm Nominal accuracy: ±0.005 mm Weight: 3.4 kg Setting ring diameter: 62 mm Extension dimensions: 152.4 mm × Ø23.5 mm Special features Three‑point internal measurement principle Suitable for blind‑hole (sack‑hole) measurement Matt‑chrome scale and vernier for readability Designed for micro‑class internal inspection Includes setting ring and extension for repeatable setups FAQ What measuring range does this instrument cover? The M312.460 three‑point internal micrometer covers a measuring span from 50 mm to 63 mm, making it appropriate for small to mid‑diameter bore inspection. Is the gauge suitable for blind‑hole measurements? Yes—this three‑point internal micrometer is specifically designed for blind‑hole measurement and is supplied with an extension (152.4 mm × Ø23.5 mm) to reach deeper bores. What resolution and accuracy can be expected during use? The gauge provides a resolution of 0.001 mm and a nominal accuracy of ±0.005 mm, delivering fine discrimination for quality control tasks. Which accessories assist traceability and setup? A Ø62 mm setting ring is included for traceable zeroing and repeatable setup; the extension supports measurement of recessed or deep bores. How durable and readable is the scale? The scale and vernier are matt chrome‑plated, which improves contrast under workshop lighting and resists wear in regular use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–75 mm Dial Thickness Gauge Ø60 mm Anvil, Painted Frame, Matt Chrome Measuring Drum, Factory Standard, Supplied in Case - Metav IndustryLine
Take advantage of the combination of fine resolution and large disc measuring faces for reliable measurement of delicate or irregular components. The precisely graduated 0.01 mm steps and robust, painted frame ensure repeatable readings across workshop routines. Order the micrometre directly via Metav Werkzeuge or ask the consultants for tailored advice. Disc‑face micrometre M309.152 – 50–75 mm, Ø 60 mm discs (Metav IndustryLine) The Disc‑face micrometre M309.152 is an analogue micrometre designed for precise external measurements of delicate and irregular parts in fine mechanical and watchmaking environments. Measuring range 50–75 mm Ø 60 mm disc measuring faces Resolution 0.01 mm Supplied in a transport case Precision tailored for fine mechanical work The disc‑face design with Ø 60 mm measuring faces distributes contact pressure over a larger area, reducing local deformation on thin or uneven components and improving repeatability. The analogue spindle provides a tactile feel for setting and a clear 0.01 mm graduation, which suits fine mechanical tasks where visual control and steady throughput matter. This combination supports consistent quality control in assembly and repair operations. Durable build for repeatable results A painted frame gives surface protection against workshop wear, while the matt‑chrome thimble improves scale legibility under varied lighting. The tool weighs 1.4 kg, lending it stable handling during measurement without being cumbersome to operate at a bench. Manufactured to Werksnorm, the instrument delivers practical robustness for daily use and easy integration into existing inspection routines. Practical handling and workshop integration Classified in the micro range for micrometres (max. 100 mm), this instrument is suited to precision tasks in watchmaking, small‑parts machining and detailed quality checks. The large discs simplify alignment on irregular geometries and the analogue format avoids battery dependence while remaining straightforward to read and maintain. For further technical data or to confirm fit with a specific application, Metav Werkzeuge provides direct specialist advice. Contact Metav Werkzeuge for tailored procurement and to discuss how the Metav IndustryLine disc‑face micrometre M309.152 fits specific inspection workflows Technical data Article number: M309.152 GTIN: 4054469118444 Category: Micrometres (Messschrauben) Core measurements Measuring range: 50–75 mm Anvil diameter: Ø 60 mm Resolution/accuracy: 0.01 mm Weight: 1.4 kg Tariff number: 90173000 Materials & features Frame: painted Measuring thimble: matt‑chrome Supply: transport case included Standard: Werksnorm Type: analogue micrometre FAQ What measuring range does this micrometre cover? The disc‑face micrometre M309.152 covers a measuring range of 50–75 mm, suitable for small to mid‑sized components. What accuracy and resolution can be expected? The instrument provides a resolution and stated accuracy of 0.01 mm, which is appropriate for fine mechanical measurement tasks. Is the micrometre suitable for delicate or irregular surfaces? Yes — the Ø 60 mm disc measuring faces are designed to spread contact pressure and improve measurement reliability on uneven or thin parts. Does the delivery include a protective case? The micrometre is supplied in a transport case to protect the instrument during storage and transit. To which standard is the instrument manufactured? The micrometre is produced to Werksnorm, indicating workshop standard manufacturing and testing procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–75 mm Digital Micrometer 0.001 mm Resolution With Ratchet, DIN 863, Plastic Case - Metav IndustryLine
Take advantage of a finely tuned combination of digital accuracy and ergonomic handling: the instrument delivers a 0.001 mm readout across a 50–75 mm span and uses a ratchet thimble for reproducible contact pressure. Order the micrometer directly via Metav Werkzeuge or contact our consultants for specification support. Digital Micrometer M302.292 — 50–75 mm, 0.001 mm resolution (Metav IndustryLine) A Digital Micrometer M302.292 designed for precise external measurements in workshop and quality‑control environments, offering a compact measuring range with high-resolution digital readout. Precision 0.001 mm digital resolution Measuring range 50–75 mm Ratchet thimble for repeatable contact Hardened measuring faces for long life Reliable measurements that speed up inspection High-resolution metrology in a compact format reduces rework and inspection time. The instrument combines a 0.001 mm display resolution with a stiff body and a ratchet thimble to ensure constant measuring force; this combination translates directly into repeatable, traceable readings for serial parts and small-batch production. Compliance with DIN 863 underlines suitability for workshop quality control, while the modest measuring span of 50–75 mm keeps the tool easy to handle and quick to align on shafts, journals and small housings. User-friendly digital functions for efficient data capture The display unit is operated via a four-button panel with ON/zero, mm/inch, ABS and HOLD functions, providing straightforward toggling between working modes and fast freezing of values for recording. An RB 4 data output is provided for external readout or integration into data-collection routines, reducing transcription errors and supporting process documentation. Clear, tactile controls and a crisp digital readout make the instrument well suited to repetitive checks in both production and inspection benches. Robust contact surfaces and workshop-ready construction Measuring faces are hardened to resist wear and to preserve accuracy over prolonged use; the ratchet mechanism prevents over‑tightening and protects delicate parts. The instrument is classified among compact, high‑precision micrometers intended for fine mechanical work, where a short measuring spindle and low moment of inertia help maintain measurement stability. Built for routine industrial use, the tool pairs practical durability with the convenience of digital evaluation for faster decision making on the shop floor. For precise external measurement in tight production workflows, contact Metav Werkzeuge to discuss the Metav IndustryLine Digital Micrometer M302.292, request a technical datasheet or arrange purchase advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M302.292 GTIN: 4054469146447 Category: Micrometers (Messschrauben) Standard: DIN 863 eClass: 21170328 ETIM: EC003590 Tariff number: 90173000 Core specifications Measuring range: 50–75 mm Resolution: 0.001 mm Display functions: ON/zero, mm/inch, ABS, HOLD Data output: RB 4 Measuring face diameter: 6.5 mm Ratchet: yes Digital: yes Features and materials Hardened measuring faces Compact construction for fine mechanical work Four-button operation for quick mode changes Suitable for workshop and quality control environments FAQ What is the resolution of the micrometer? The micrometer provides a resolution of 0.001 mm, enabling fine differentiation for precision external measurements with the Metav IndustryLine Digital Micrometer M302.292. Which measuring range is covered by this instrument? The instrument covers a measuring range of 50–75 mm, making it suitable for small to medium external features commonly inspected in workshops. Does the micrometer offer data output for traceability? Yes, the micrometer includes an RB 4 data output for external readout and integration into data collection systems, simplifying documentation and SPC routines. Are the measuring faces wear-resistant? The measuring faces are hardened to improve wear resistance and maintain measurement accuracy during repeated use with the Metav IndustryLine micrometer. Is the instrument compliant with recognised standards? The tool is manufactured to meet DIN 863, supporting its use in standard workshop and inspection applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–75 mm Digital Micrometer 0.001 mm Resolution, IP65, Ratchet, Four-Button Display, Plastic Case - Metav IndustryLine
Combine 0.001 mm resolution with an IP65 rating and a ratchet thimble for repeatable measuring force to secure dependable dimensional control in fine‑component work. Benefit from the compact measuring range and robust data output for streamlined quality checks. Order directly via Metav Werkzeuge or consult the Metav team for application advice. Digital Micrometer M302.296 – 50–75 mm, 0.001 mm resolution, IP65 The Digital Micrometer M302.296 is a compact, workshop‑grade outside micrometer designed for precision measurement of small to medium components, ideal for tasks that demand sub‑micron indication and protected operation. Digital micrometer, 0.001 mm resolution IP65 dust and splash protection Ratchet thimble for repeatable force 4-function display with mm/inch selection Precise control for fine components and fixtures This micrometer delivers a 0.001 mm readout within its 50–75 mm measuring span, placing it in the compact "micro" class for highly detailed work. The fine resolution supports precise adjustment and verification of shafts, spindles and small housings without overcomplicating the workflow. Compliance with DIN 863 ensures the instrument meets recognised tolerance and form standards, so measurement results are both traceable and comparable across inspections. The comparatively small anvil and spindle face diameter, specified as 6.5 mm, concentrates contact force and reduces measurement scatter on narrow features, improving repeatability in serial checks and assembly controls. Designed for dependable use in demanding environments Protection to IP65 safeguards internal electronics against dust ingress and low‑pressure water jets, which keeps the instrument operational in busy production or inspection bays. A ratchet thimble provides a consistent measuring force, removing variability caused by operator technique and helping to avoid overloading delicate parts. The solid construction and sealed electronics reduce downtime from contamination and permit confident use at the machine or alongside measuring fixtures. These reliability features translate into fewer retests, less scrap and a more consistent throughput during quality control procedures. Fast readout and data transfer for efficient workflows The large digital display offers four dedicated controls (ON/0, mm/inch, ABS, HOLD) for immediate unit switching and zeroing, enabling rapid changeovers between imperial and metric tasks without additional calculations. Data output via RB 4 supports integration with measurement data collectors or SPC systems, speeding documentation and reducing manual transcription errors. Together, the intuitive interface and available data output improve inspection cycle times and feed quality data directly into process control, supporting rational decisions and traceable records for audits. Contact Metav Werkzeuge for precise availability and tailored advice on using the M302.296 in your inspection process; Metav’s specialists in Emmerich can confirm stock and recommend the best calibration or data‑logging options Technical Data Article number: M302.296 GTIN: 4054469115634 Category: Messschrauben Standard: DIN 863 Facts Measuring range: 50–75 mm Resolution: 0.001 mm Measuring face diameter: 6.5 mm Protection class: IP65 Special features Ratchet thimble for constant measuring force Digital display with ON/0, mm/inch, ABS and HOLD Data output: RB 4 Digital operation (metric/imperial switching) FAQ What measuring range does this instrument cover? The micrometer covers a measuring range of 50–75 mm, making the M302.296 suitable for fine mechanical parts within that span. What resolution and repeatability can be expected? Resolution is 0.001 mm on the display; repeatability is supported by the ratchet thimble that ensures a consistent measuring force during repetitive checks. Is the micrometer suitable for use near production machinery? Yes. The IP65 rating on the M302.296 protects against dust and low‑pressure water jets, so it is suitable for use in many workshop and shop‑floor environments. Can measurement data be exported to a PC or SPC system? The unit is equipped with RB 4 data output, allowing connection to compatible data loggers or SPC interfaces for automated data capture. Are the measuring faces hardened for wear resistance? The instrument features hardened measuring faces with a 6.5 mm diameter that improve wear resistance and preserve measurement integrity over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–75 mm Digital Micrometer With Friction Ratchet 0.001 mm Resolution Data Output RB6 DIN 863 - Metav IndustryLine
Take advantage of the combination of ultra‑fine resolution, a consistent friction ratchet and digital data transfer for dependable shopfloor measurements; the result is faster quality checks and fewer reworks. Order the micrometer directly via Metav Werkzeuge or consult the specialists for integration advice. Digital Micrometer M302.076 — 0.001 mm resolution, RB 6 data output (Metav IndustryLine) The Digital Micrometer M302.076 is a compact, high‑precision measuring instrument for dimensional quality control of small to medium components, designed for workshop and inspection tasks within the 50–75 mm range. Reading 0.001 mm resolution Friction ratchet for repeatable measuring force RB 6 data output for digital recording Measuring faces Ø 6.5 mm, hardened Accurate measurement through controlled contact force The micrometer offers a resolution of 0.001 mm, which enables fine incremental readings for demanding tolerance checks. The integrated friction ratchet ensures a consistent measuring force on every measurement, reducing operator‑induced variance and improving repeatability during serial checks. The large digital display (with ON/OFF/SET, DATA and mm/inch/0 keys) presents values clearly, while the instrument’s geometry and hardened measuring faces minimise wear and help maintain long‑term accuracy for routine inspection tasks. Digital output for traceability and process control Equipped with an RB 6 data interface, the instrument supports straightforward transfer of measurement values into recording systems and statistical process control workflows. This digital connectivity simplifies documentation, reduces transcription errors and accelerates data capture during batch sampling. The combination of precise display and electronic output makes the device suitable for integration into inspection routines where measurement traceability and digital logging are required. Built to industrial standards for dependable workshop use Conforming to DIN 863, the micrometer is built to withstand daily workshop use while delivering consistent performance across its 50–75 mm measuring range. The measuring faces, specified at 6.5 mm diameter, are robust against abrasive wear and maintain contact geometry for trustworthy results. With a compact form factor and balanced weight, the instrument is practical for one‑hand operation during repetitive inspection tasks, offering a reliable bridge between benchtop metrology and production control. For traceable, repeatable measurements, request the Metav IndustryLine Digital Micrometer via Metav Werkzeuge and consult our experts at info@metav-werkzeuge.com or +49 2822 7131930 for application recommendations. Technical data SKU: M302.076 GTIN: 4054469168814 Measuring range: 50–75 mm Resolution: 0.001 mm Display functions: ON/OFF/SET, DATA, mm/inch, zero Core specifications Readout increment: 0.001 mm Measuring faces diameter: 6.5 mm Weight: 1 kg Standard: DIN 863 Tariff number: 90173000 Features Digital display with ON/OFF/SET/DATA/mm/inch/0 keys Friction ratchet for repeatable measuring force Data output: RB 6 Category: Micrometers (Messschrauben) Digital instrument for workshop and inspection use FAQ What is the smallest increment the instrument can display? The Digital Micrometer M302.076 displays increments of 0.001 mm, allowing very fine resolution for precision checks. Does the micrometer provide electronic data output for SPC? Yes. The micrometer features an RB 6 data output suitable for digital recording and integration into process control systems. How does the friction ratchet affect measurements? The friction ratchet ensures a consistent measuring torque on each reading, improving repeatability and reducing operator variation with the Digital Micrometer M302.076. Which standard does the instrument comply with? The device is manufactured in accordance with DIN 863, meeting recognised mechanical metrology requirements. What is the diameter of the measuring faces? The measuring faces are Ø 6.5 mm, designed for stable contact and longevity in routine measuring tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–75 mm Thread Micrometer With 50 mm Setting Gauge 60° Calibration Certificate, In Case - Metav IndustryLine
Take advantage of precise thread inspection with a 0.01 mm graduation and a practical 50–75 mm measuring range; the integrated 50 mm 60° setting gauge simplifies setup and speeds quality checks. Order the instrument via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Thread Micrometer M309.093 — 50–75 mm with 60° Setting Gauge Metav IndustryLine Thread Micrometer M309.093 is a purpose-built instrument for accurate external thread measurement in production and inspection environments Precision 0.01 mm graduation Thread measurement range 50–75 mm Non-rotating 6.5 mm spindle Includes 50 mm 60° setting gauge Consistent thread verification for fewer rejects The thread micrometer delivers 0.01 mm resolution across a 50–75 mm range, providing the numerical control that modern production demands. A finer graduation means repeatable readings when assessing thread peak-to-peak dimensions or pitch diameters, reducing the need for corrective rework. By translating the mechanical graduation into reliable process control, the instrument supports faster decision-making on the shop floor and tighter quality gates in final inspection. Stable mechanics that preserve accuracy over time A non-rotating 6.5 mm spindle and a robust analogue screw mechanism ensure low wear on contact faces and stable measurement behaviour during routine use. The spindle design minimises marking and slippage, which helps maintain repeatable calibration intervals. At approximately 0.7 kg, the instrument balances portability and mass damping, making it comfortable for handheld checks while remaining steady enough for bench measurements in serial inspection. Practical accessories and workshop compatibility The micrometer is supplied with a 50 mm 60° setting gauge, enabling quick instrument setup and verification of the measuring faces before sampling a batch. This combination shortens setup time in inspection protocols and fits naturally into incoming goods checks, bench testing and production stop-and-go measurements. As part of the Metav IndustryLine, the device benefits from the supplier’s focus on accessible precision: straightforward tooling, clear specifications and a stock range that supports many workshops and small-scale manufacturers. For reliable thread measurement in production or inspection, choose the Metav IndustryLine Thread Micrometer M309.093 — contact Metav Werkzeuge for ordering and application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: M309.093 GTIN: 4054469118185 Label: Thread micrometer 50 - 75 mm incl. setting gauge 50 mm 60° Manufacturer: Metav IndustryLine Core data Measurement range: 50–75 mm Resolution / graduation: 0.01 mm Spindle diameter: 6.5 mm Weight: 0.7 kg Customs tariff number: 90173000 Special features Analog reading Non-rotating spindle Includes 50 mm 60° setting gauge Category: Thread micrometer (measuring screw) FAQ What measurement range does this micrometer cover? The Thread Micrometer M309.093 by Metav IndustryLine measures externally from 50–75 mm, suitable for medium-sized threaded parts. What resolution and precision can be expected? This instrument provides a 0.01 mm graduation; as an analogue micrometer this gives reliable shop-floor precision for thread inspections. Is a setting gauge included with the micrometer? Yes, the Metav IndustryLine thread micrometer is supplied with a 50 mm 60° setting gauge for quick verification and setup. Why is the non-rotating spindle important for thread measurement? The non-rotating 6.5 mm spindle reduces marking and improves repeatability when the measuring faces contact threaded profiles, supporting consistent comparisons across samples. Is this instrument suitable for production and incoming inspection? The M309.093 is designed for routine production and inspection tasks where clear graduations and robust mechanics speed decision-making and help enforce quality standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–75mm Left-Hand Thimble Micrometer 0.01mm Resolution Ratchet, Matt Chrome Thimble, DIN 863 - Metav IndustryLine
Take advantage of precise mechanical measurement, robust handling and a left‑hand configuration that improves workflow where required; the combination of a 50–75 mm measuring range, 0.01 mm graduation and a ratchet stop supports consistent, repeatable external measurements — order the M304.530 directly via Metav Werkzeuge or consult our specialists for procurement advice. M304.530 — Metav IndustryLine outside micrometre, 50–75 mm, 0.01 mm The M304.530 is a left‑hand outside micrometre tailored for accurate external diameter measurement in workshop and production settings, offering a 50–75 mm range with fine 0.01 mm indication for routine quality control. Precise 0.01 mm graduation Left‑handed spindle arrangement Ratchet stop for consistent force Matt‑chrome thimble for low glare Repeatable precision for routine inspections The micrometre delivers mechanical reading with a standard 0.01 mm graduation, combining a fine spindle pitch 0.5 mm with a clearly marked thimble to make single‑operator measurements fast and reliable. The ratchet stop ensures a constant measuring force, reducing operator‑dependent variance and improving reproducibility for batch checks and incoming inspection tasks. Compliance with DIN 863 confirms suitability for general workshop calibre work where robust, verifiable results are required. Ergonomic handling and left‑hand configuration Designed as a left‑hand version, this outside micrometre relocates the thimble and lock so that handling and reading are more comfortable for left‑handed operators, improving workflow in mixed‑handed teams. The matt‑chrome finished thimble reduces reflections under shop lighting, and the ratchet mechanism provides tactile feedback at the end of travel, helping maintain consistent contact and protecting delicate surfaces from over‑pressure. Such features shorten inspection cycles while protecting components. Construction, measurement faces and delivery condition The instrument is built with hardened measuring faces for wear resistance and stable results across shifts; measuring faces are present and prepared for long service life. A robust spindle with a diameter of 6.5 mm and a 0.5 mm lead per revolution gives tactile control and fine linear translation for micro‑adjustments. Delivered in a transport case to protect the tool between uses, the instrument is ready for workshop deployment and safe storage during transport. For procurement or technical clarification regarding the Metav IndustryLine left‑hand outside micrometre (M304.530), contact Metav Werkzeuge in Emmerich for specification sheets or purchasing assistance — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M304.530 GTIN: 4054469117119 Customs tariff number: 90173000 Facts Measuring range: 50–75 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Standard: DIN 863 Analog reading Special features Ratchet stop for constant measuring force Matt‑chrome thimble Left‑hand version Hardened measuring faces Delivered in transport case Category: Micrometre (outside) FAQ What measuring range does this micrometre cover? The M304.530 covers a measuring range of 50–75 mm, suitable for small to medium external diameters in workshop and production environments. How fine is the graduation and what accuracy can be expected? The instrument has a 0.01 mm graduation; the combination of a 0.5 mm spindle pitch and ratchet stop enables consistent, repeatable readings aligned with DIN 863 practice. Is this instrument suitable for left‑handed operators? Yes, the M304.530 is a left‑hand version with a repositioned thimble and locking arrangement to suit left‑handed handling and reading comfort. How is the micrometre supplied for transport and storage? The product is supplied in a protective transport case to safeguard the micrometre during transit and when not in use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–75mm Universal Micrometer With Interchangeable Inserts, Friction Ratchet, 7 Inserts, Transport Case - Metav IndustryLine
Benefit from high reproducibility and a compact design: the combination of a 0.01 mm graduation and a friction ratchet ensures repeatable external measurements, while seven interchangeable inserts extend application versatility. Order directly via Metav Werkzeuge or consult our advisors for specification support. Universal Micrometer M309.082 — 50–75 mm, 7 interchangeable inserts (Metav IndustryLine) A Universal Micrometer M309.082 for precise external measurements of shafts, small components and inspection tasks in workshops and inspection labs. 50–75 mm measuring range 0.01 mm graduation for fine reading Seven interchangeable measuring inserts Friction ratchet for constant measuring force Precision where it counts for repeatable results The instrument delivers accurate external measurements across a 50–75 mm span, with a mechanical reading resolution of 0.01 mm that suits detailed workshop and inspection work. The friction ratchet stabilises contact force to reduce operator influence, improving reproducibility on turned shafts and precision parts. The spindle is non-rotating, which prevents twisting of the workpiece and simplifies alignment during measurement. Robust build and ergonomic handling for daily use A painted frame combined with a matt-chromed measuring drum provides corrosion resistance and low-reflection handling in production environments. The 6.5 mm measuring spindle balances stiffness and sensitivity to ensure steady contact and long-term wear resistance. The micrometer’s form and weight make it comfortable for frequent use while maintaining the stability required for precise readings. Versatile accessories and delivery suited to the workshop Supplied with seven pairs of special measuring inserts, the micrometer adapts to a range of shaft profiles and surface types without the need for additional tooling. A setting gauge is included for quick verification of zero and basic adjustment. The instrument is delivered in a sturdy transport case and conforms to factory standard quality (Werksnorm), supporting safe storage and simple handling between inspection points. For application advice or to confirm suitability for specific materials and tasks, contact Metav Werkzeuge to discuss the Metav IndustryLine micrometer and arrange prompt delivery from Emmerich. Technical data Article number: M309.082 GTIN: 4054469117812 Customs tariff number: 90173000 Facts Measuring range: 50–75 mm Resolution / graduation: 0.01 mm Accuracy: 0.01 mm Measuring spindle diameter: 6.5 mm Weight: 0.8 kg Display type: Analog Special features Friction ratchet Seven interchangeable measuring inserts included Non-rotating measuring spindle Painted frame and matt-chromed measuring drum Supplied in a transport case Factory standard: Werksnorm Includes setting gauge FAQ Is the micrometer suitable for measuring shafts and turned parts? Yes. The Universal Micrometer M309.082 is designed for external measurements on shafts and turned components; the non-rotating spindle and friction ratchet support secure contact and repeatable readings. What inserts are supplied and how do they expand capability? The micrometer is supplied with seven pairs of special measuring inserts that allow adaptation to varied profiles and surface geometries, extending the instrument’s application range without additional tooling. Does the instrument come with a case for transport? Yes. The micrometer is supplied in a transport case to protect the gauge during transfer and storage between inspection stations. How is measurement consistency ensured during repetitive checks? Consistency is achieved via the friction ratchet, which applies a controlled measuring force, together with the non-rotating spindle that reduces specimen disturbance during contact. Which quality standard applies to this micrometer? The instrument is supplied to factory standard (Werksnorm) and includes a setting gauge for fast verification; traceable laboratory calibration details are provided on request where applicable. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
525mm Setting Gauge for Micrometers With Thermal Shielding, Ball-Ended Measuring Faces Accuracy ±0.006mm - Metav IndustryLine
Take advantage of the combination of high repeatability, robust thermal protection and a long 525 mm nominal length for reliable micrometer setting in production and service routines; the precise ±0.006 mm tolerance supports fine adjustment tasks with industrial consistency. Order the setting gauge directly via Metav Werkzeuge or ask our consultants if needed. Setting Gauge for Micrometers M304.320.6 — 525 mm, ±0.006 mm accuracy The Setting Gauge for Micrometers M304.320.6 is a precision reference rod designed for the calibration and adjustment of outside micrometers in workshop and laboratory environments 525 mm nominal length for extended reach Accuracy ±0.006 mm for high-precision setting Thermal protection reduces heat transfer errors Ball-ended measuring faces for repeatable contact Precision where measurement stability reduces rework The gauge provides ±0.006 mm accuracy (equivalent to 6 µm), a level of precision that removes guesswork when setting or checking outside micrometers. This resolution translates into measurable improvements in process control: a stable reference at this tolerance allows repeat adjustments to be made with confidence and reduces the need for corrective machining. The long nominal span of 525 mm supports applications beyond small parts, enabling checks on longer components or assemblies while maintaining a compact handling profile. The specified tolerance is expressed in absolute terms so that decision-making for quality control can be based on objective criteria rather than operator feel. Stable results in workshop conditions through thermal and contact design The instrument incorporates thermal protection, which limits heat transfer from hands and the environment and so reduces systematic measurement drift during repeated use. Combined with ball-ended measuring faces, this design ensures a single, well-defined contact point that reduces variability caused by slight angular misalignment. The listed mass of 0.8 kg provides enough inertia for steady placement while keeping the gauge easily manoeuvrable for one-person operation. Together, these elements support reproducible setups and faster throughput in routine inspection or during tool calibration cycles, emphasising reliable results under normal shop-floor conditions. Efficient calibration workflow and practical compatibility Designed as an accessory for setting outside micrometers, the reference rod streamlines the calibration workflow and simplifies the transfer of a length standard into hand-held instruments and comparators. The combination of length, contact geometry and thermal control reduces setup time and the number of iterative checks before sign-off. The model is supplied as a ready accessory with the commercial identification M304.320.6 and is suitable for use where a stable, long reference is required to align micrometric measuring tools or to verify linear adjustments on fixtures and gauges. Choose the Metav IndustryLine setting gauge M304.320.6 for dependable micrometer adjustment — contact Metav Werkzeuge in Emmerich for specialist advice and local supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M304.320.6 GTIN: 4054469116754 Customs tariff number: 90173000 Facts Nominal length: 525 mm Accuracy: ±0.006 mm (6 µm) Weight: 0.8 kg Diameter D: 16 mm Special features Thermal protection (mit Wärmeschutz) Ball-ended measuring faces (ballig) Accessory for setting outside micrometers Category: Zubehör Manufacturer: Metav IndustryLine FAQ What accuracy can be expected from this setting gauge? The setting gauge provides an accuracy of ±0.006 mm (6 µm), which is suitable for high-precision adjustment and verification tasks where micrometric tolerances are required. Which nominal length does the gauge offer and what is it used for? The nominal length is 525 mm; the gauge is intended as an accessory for setting and checking outside micrometers and for transferring a stable length reference in workshop or laboratory contexts. How do the ball-ended measuring faces influence measurement repeatability? The ball-ended measuring faces create a defined point contact that compensates for minor angular misalignment and improves repeatability by reducing the contact variability typical of flat or irregular contact surfaces. What is the role of the thermal protection feature? The thermal protection reduces heat transfer from hands and the environment to the reference body, lowering systematic drift during repetitive handling and improving consistency in successive measurements. Is this model identified by a specific SKU or code? Yes, the product is listed under the article number M304.320.6 and carries GTIN 4054469116754 for unambiguous procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
575mm Setting Gauge For Micrometre, Ball Contact, Thermal Protection, Accuracy ±0.006mm - Metav IndustryLine
Take advantage of the combination of ±0.006 mm accuracy, thermal protection and a 575 mm nominal length to achieve repeatable micrometer settings across a wide range of workshop tasks; order the setting gauge directly via Metav Werkzeuge or contact our consultants for detailed application advice. Setting gauge for micrometers M304.320.7 — 575 mm, ±0.006 mm accuracy (Metav IndustryLine) The Setting gauge for micrometers provides a rigid 575 mm reference length designed for precise adjustment of external micrometers and repeatable workshop checks. 575 mm nominal length, rigid reference ±0.006 mm (6 µm) measurement accuracy Spherical measuring faces with thermal protection Consistent precision for production and inspection The gauge delivers highly repeatable readings thanks to an accuracy of ±0.006 mm (6 µm) and a long, stable reference length of 575 mm. This level of precision supports quality-assurance routines where micrometers must be set to a known standard prior to batch inspection or process checks. By providing a clear nominal length and defined tolerance, the gauge reduces variability that would otherwise arise from informal setting methods, improving throughput in calibration and measurement loops while maintaining compliance with typical workshop tolerances. Thermal stability and reliable contact geometry Built with thermal protection, the gauge minimises the influence of ambient temperature changes on the reference length, which is particularly important at longer sizes. The spherical measuring faces ensure consistent point contact with micrometer anvils, lowering the risk of misalignment or edge contact that can bias a setting. A compact stem of 16 mm diameter aids in guided contact and repeatability, while the overall design prioritises stable seating during adjustment operations. Suited to larger workshop ranges and streamlined workflows Classified as a Large-range gauge (500–1,000 mm), the reference length covers larger micrometer ranges and simplifies inventory by replacing multiple shorter standards. At a weight of 0.9 kg, the gauge is manageable for single-person handling while still providing the mass necessary for steady placement. Integrating the gauge into routine setup reduces adjustment time for production lines and supports consistent measurement practices across shifts, contributing to faster machine changeovers and fewer rejected parts. Practical handling, traceability and workshop use The accessory is intended as a calibrated reference length for setting external micrometers and for regular bench checks. The combination of 575 mm nominal length, defined ±0.006 mm tolerance and pragmatic handling features supports traceability in inspection logs and can be incorporated into existing calibration routines. The compact footprint and straightforward geometry make it a practical addition to the metrology bench where dependable, repeatable micrometer settings are required. For tailored advice on how the Metav IndustryLine setting gauge M304.320.7 can be integrated into existing calibration and inspection workflows, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and delivery arrangements. Technical Data Article number: M304.320.7 GTIN: 4054469116761 Customs tariff number: 90173000 eClass: 21170102 Brand: Metav IndustryLine Facts Nominal length: 575 mm Accuracy: ±0.006 mm (6 µm) Diameter: 16 mm Weight: 0.9 kg Special features Spherical measuring faces Thermal protection Category: Accessory for measuring instruments FAQ Is the gauge suitable for setting all external micrometers? The setting gauge for micrometers is intended as a 575 mm reference standard and is suitable for setting external micrometers whose range or anvils can be referenced to that length; consult the specification of individual micrometers for compatibility. What level of precision does the reference provide? The Metav IndustryLine setting gauge M304.320.7 provides an accuracy of ±0.006 mm (6 µm), which supports fine adjustment and repeatable reference points for workshop and inspection uses. How does the thermal protection affect measurements? Thermal protection reduces the impact of ambient temperature changes on the reference length, helping to maintain the 575 mm nominal value within the specified ±0.006 mm tolerance during routine bench operations. What advantages do spherical measuring faces offer? Spherical measuring faces provide consistent point contact with micrometer anvils, lowering alignment errors and improving repeatability when establishing reference settings. Is calibration documentation included with the gauge? Product data does not specify an ISO 17025 certificate by default; for information on calibration documentation and available certification options, please contact Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5–6mm Internal Measuring Micrometer With Carbide Faces, Setting Ring 6mm, Supplied In Case - Metav IndustryLine
Taking advantage of its micro-range design, carbide measuring faces and included 6 mm setting ring ensures repeatable internal measurements in small bores with minimal setup time; order the micrometer directly via Metav Werkzeuge or ask our consultants for application advice. M312.129 Inside micrometer — 5–6 mm, carbide measuring faces (Metav IndustryLine) The M312.129 is an analogue inside micrometer designed for ultra‑fine internal measurement tasks, especially blind‑bore and small‑component inspection in precision workshops and toolrooms. Micro-range 5–6 mm for ultra-fine work Carbide measuring faces for wear resistance Includes 6 mm setting ring for fast calibration Supplied in protective case for transport High precision where small tolerances matter This analogue inside micrometer delivers a specified accuracy of ±0.004 mm, making it suitable for demanding fine‑mechanical checks. The instrument’s reading increment is 0.001 mm, which—together with the finely graduated vernier and matt chrome‑plated scale—permits clear interpretation of results without electronic conversion. The use of carbide (HM) measuring faces reduces wear on the contact surfaces, so measurement reproducibility is preserved over long production runs. For shops replacing routine bench checks with a robust mechanical standard, this tool offers a cost‑effective route to consistent internal measurements. Built for repeatable measurements and easy setup Delivered with a matched 6 mm setting ring, the device can be zeroed and verified quickly before batch checks, reducing downtime during shift changes. The matt chrome finish on the scale and vernier improves contrast under workshop lighting and resists glare, which aids rapid, error‑free readings. The construction targets compact inspection tasks: the micro‑range design is optimised for small bores and components typical in watchmaking, small valve seats and precision turned parts. Supplied in a protective case, the instrument is protected during transport and storage, supporting reliable use across multiple jobsites. Practical applications and user advantages The instrument is intended for internal diameter inspection and is specifically suitable for blind hole measurements, where access and repeatability are critical. The analogue format requires no batteries and offers tactile control when measuring delicate bores. Because the measuring faces are carbide, the instrument is appropriate for routine use on non‑abrasive and mildly abrasive surfaces without rapid degradation. Metav IndustryLine’s specification balances workshop practicality with traceable performance, making this micrometer a sensible choice where space, repeatability and low maintenance are priorities. For reliable internal checks in ultra‑small bores choose the Metav IndustryLine M312.129 — contact Metav Werkzeuge in Emmerich for product details or application guidance via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: M312.129 GTIN: 4054469119427 Category: Messschrauben (micrometers) Tariff code: 90173000 Facts Measuring range: 5.0–6.0 mm Reading increment: 0.001 mm Specified accuracy: ±0.004 mm Setting ring: 6 mm included Special features Carbide measuring faces (HM) Scale and vernier matt chrome‑plated Analogue (nonius) design Supplied with setting ring Supplied in protective case Suitable for blind‑hole measurements FAQ What accuracy can be expected from this inside micrometer? The specified accuracy for the M312.129 inside micrometer is ±0.004 mm, which supports high‑precision internal checks in micro‑range applications. Does the instrument include a calibration or setting aid? Yes, the instrument is supplied with a 6 mm setting ring to allow rapid zeroing and verification before measurement sequences. Are the measuring faces durable for workshop use? The measuring faces are made of carbide (HM), which provides strong wear resistance and sustained repeatability in routine shop use. Is this micrometer suitable for blind hole measurements? The design is expressly suitable for blind‑hole measurements, where accessing and reliably reproducing internal dimensions is required. Does the micrometer require batteries or electronic components? No, the M312.129 is an analogue instrument with a vernier scale and does not require batteries, simplifying maintenance and long‑term use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6-10mm Digital Three-Point Internal Gauge Two Heads, IP65 With Setting Ring And Extension - Metav IndustryLine
Benefit from precise three‑point internal measurement, robust IP65 protection and fine 0.004 mm accuracy for reproducible results; order the M312.283.PN directly via Metav Werkzeuge or ask our consultants if needed M312.283.PN — Digital three‑point internal micrometre, 6–10 mm, IP65 (Metav IndustryLine) The M312.283.PN is a compact digital three‑point internal micrometre intended for accurate blind‑hole and small‑bore inspections in workshop and fine‑mechanical environments Digital display with mm/inch and HOLD Three‑point internal measurement for centring IP65 protection for harsh workshop conditions Includes setting ring and 100 mm extension Engineered for reliable, repeatable internal measurement The instrument is built around a three‑point measuring head that centres automatically in small bores, reducing operator influence and improving repeatability. With a measuring range of 6–10 mm and a stated accuracy of 0.004 mm, the device bridges the gap between handheld gauges and bench metrology for fine internal inspections. The compact measuring depth of 55 mm supports access into shallow blind holes while the lightweight construction maintains manoeuvrability during repetitive tasks. These characteristics make the tool particularly suitable where consistent centring and minimal run‑out are essential. Durable design and practical delivery for everyday use Designed for workshop realities, the micrometre carries an IP65 rating that guards sensitive electronics against dust and splashes, enabling use close to production without compromising the instrument. The unit weighs 1.8 kg and is supplied complete with a setting ring and a 100 mm extension to handle slightly recessed features; delivery in a protective transport box ensures safe storage and movement between workstations. Robust components and sealed electronics provide confidence in rougher environments, supporting uninterrupted inspection routines and lower downtime. Clear digital readout and data output for process integration A high‑resolution display with a reading step of 0.001 mm delivers fine numerical feedback; functions include ON/PRESET, mm/inch switching and HOLD for stable readings. The built‑in RB 6 data output allows connection to external recording systems for documentation or SPC workflows, simplifying traceability in quality control. Because the head configuration is optimised for blind‑hole bores, the device streamlines internal diameter checks without the need for special fixturing, while the straightforward controls reduce training time and improve throughput. Contact Metav Werkzeuge for tailored advice on integrating the IP65 digital three‑point internal micrometre into measurement routines; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M312.283.PN GTIN: 4054469179247 Category: Internal micrometre (three‑point) Data Measuring range: 6–10 mm (6–8 + 8–10) Resolution: 0.001 mm Accuracy: 0.004 mm Measuring depth: 55 mm Weight: 1.8 kg Extension: 100 mm Customs tariff number: 90173000 Special features Digital display with ON/PRESET, mm/inch and HOLD Data output: RB 6 IP 65 protection Two measuring heads for three‑point internal measurement Suitable for blind‑hole bores Includes setting ring and extension Delivered in transport box FAQ What measuring range does the instrument cover? The M312.283.PN covers a measuring range of 6–10 mm, split into 6–8 mm and 8–10 mm segments for precise small‑bore checks. How accurate is the digital readout? The digital display on the M312.283.PN provides a resolution of 0.001 mm with an overall accuracy of 0.004 mm for repeatable internal measurements. Is the micrometre suitable for blind‑hole bores? Yes, the design of the M312.283.PN is specifically suited to measure blind‑hole bores and includes extensions and a setting ring to facilitate recessed checks. Can measurement data be exported to a PC or SPC system? The device features an RB 6 data output, enabling connection to external recording systems for documentation and process control with the M312.283.PN. What accessories are included with delivery? Delivery of the M312.283.PN includes a setting ring, a 100 mm extension and protective transport packaging for safe handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com