Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
50-70mm Three-Point Internal Micrometer Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from laboratory-grade traceability with ISO 17025 calibration, high-precision readings to ±0.004 mm and fast data capture via wireless or USB for efficient quality control; order this instrument directly via Metav Werkzeuge or contact our consultants for technical advice. Three-point internal micrometer — 50–70 mm, ISO 17025 calibrated The Three-point internal micrometer is a compact, workshop-ready instrument for traceable internal diameter measurement in inspection benches and production control ISO 17025-calibrated with certificate included Wireless and USB data transfer Colour 1.5" touchscreen display Measuring range 50–70 mm, accuracy ±0.004 mm Laboratory-grade accuracy for critical bores The micrometer delivers ±0.004 mm measurement accuracy supported by an ISO 17025 calibration certificate, which documents traceability for audit and quality systems. With a fine display resolution of 0.0001 mm, the instrument provides stable numeric output for documented inspections and acceptance testing; this level of certainty reduces rework and supports consistent process capability checks in small-part production and precision engineering. Fast data capture and straightforward workflow integration Equipped with Wireless and USB data outputs and a colour 1.5" touchscreen, the unit simplifies transfer of measured values into reporting or statistical software, cutting administrative time between measuring and recording. The included adjustment ring aids quick setting and centring, while the electronic readout removes the need for manual interpolation, making data capture both faster and less error-prone in routine shop‑floor or laboratory procedures. Stable three-point contact for reproducible internal measurements The three‑contact measuring head produces self‑centring engagement with the bore, which improves concentricity and repeatability compared with single‑point probes. Designed for the Micro class of instruments (measuring range up to 100 mm), the device balances compactness with rigidity — ideal for fine mechanical work where short anvils and a low moment of inertia reduce bending and operator influence during measurement. Ready for inspection and compliant documentation Delivered fully calibrated under ISO 17025, the instrument arrives with a calibration certificate suitable for quality records and supplier qualification. The 50–70 mm range and a measuring depth of 250 mm make the tool versatile for bores, sleeves and similar internal geometries, while digital outputs allow straightforward integration into traceability chains and production reports without additional conversion steps. This combination supports both workshop-level checks and formal laboratory tasks with clear, auditable results. Contact Metav Werkzeuge today to discuss specification details, request the ISO 17025 certificate or arrange immediate supply from Emmerich for fast integration into existing inspection workflows Technical Data Article number: 133707010 GTIN: 4061905074271 Manufacturer: Microtech Metrology Facts Measuring range: 50–70 mm Accuracy: ±0.004 mm Resolution (display): 0.0001 mm Measuring depth: 250 mm Digital display: colour 1.5" touchscreen Special features Wireless + USB data output Adjustment ring included Three-point internal measuring head Delivered calibrated to ISO 17025 with certificate FAQ What documentation is supplied with the instrument? The Three-point internal micrometer from Microtech Metrology is supplied with an ISO 17025 calibration certificate and traceability records suitable for quality systems. Which interfaces are available for data transfer? Measured values can be exported via Wireless or USB from the Microtech Metrology internal micrometer (SKU 133707010) for direct entry into inspection logs or SPC software. What range and accuracy does this tool cover? This instrument covers 50–70 mm with an accuracy of ±0.004 mm, making it suitable for precision internal diameter checks in production and laboratory settings. How does the three‑point head improve measurements? The three‑point contact self‑centres in bores, improving concentricity and repeatability compared with single‑point probes; this yields more reproducible internal diameters for serial inspection. Is the device suitable for both workshop and laboratory use? Yes — the combination of compact design, digital readout and ISO 17025 calibration makes the tool appropriate for shop‑floor controls and formal laboratory inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75 mm Bore Gauge With Friction Ratchet, Matt Chrome Measuring Drum, Case - Metav IndustryLine
Take advantage of the combination of precise mechanical control, a clear 0.01 mm scale and robust matte chrome finish for reliable external measurements in workshop and production environments. Order the micrometer directly via Metav Werkzeuge or ask the consultants for application support. M304.230 Outside Micrometer 50–75 mm — friction ratchet, matt chrome-plated drum (Metav IndustryLine) The M304.230 outside micrometer is a workshop instrument for precise external measurements in metalworking and quality control applications Friction ratchet for repeatable measuring Matte chrome-plated measuring drum Measuring range 50–75 mm, 0.01 mm scale Repeatable precision that reduces rework The instrument delivers repeatable results through a friction ratchet that standardises contact force and therefore reduces operator-induced variation. With a measuring range of 50–75 mm and an analog scale readable to 0.01 mm, the tool suits routine dimensional checks where consistent tolerances matter. The combination of a finely pitched spindle and the ratchet mechanism translates into smaller measurement scatter, supporting production processes that demand predictable outcomes and fewer rejected parts. Clear mechanics for straightforward workshop use Designed for practical use on the shop floor, the micrometer offers a matte chrome-plated measuring drum that reduces glare and improves scale legibility under task lighting. The spindle pitch 0.5 mm provides a tactile, incremental feel when adjusting, while the solid frame design keeps measuring faces parallel under light handling. Because the device is analog, there are no batteries or electronics to service, which simplifies routine inspection cycles and maintenance planning in a busy production environment. Industry-standard compliance and durable construction Manufactured to DIN 863, this outside micrometer follows established metrology norms for dimensional control and interchangeability in tool rooms and quality departments. The measuring drum and spindle materials are finished to withstand regular handling and to preserve scale clarity over time. For workshops seeking a balance of mechanical reliability and easy operation, this instrument offers a robust solution that integrates into existing inspection routines without additional infrastructure. Choose the Metav IndustryLine M304.230 for durable, repeatable external measurement and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M304.230 GTIN: 4054469116471 Category: Messschrauben Standard: DIN 863 Numbers / Core technical data Measuring range: 50–75 mm Resolution / Reading: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Analog instrument Designs / Special features Friction ratchet for consistent contact force Matte chrome-plated measuring drum Mechanical micrometer frame for external measurements FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 50–75 mm, making it suitable for medium-sized external dimensions. What is the scale resolution and how precise is the reading? The device provides an analog reading with 0.01 mm resolution, enabling standard workshop precision for dimensional control. Does the micrometer meet recognised standards? Yes, the instrument is produced to DIN 863, aligning it with common metrology requirements for outside micrometers. What feature ensures repeatable measurements across operators? The built-in friction ratchet standardises contact force and helps achieve repeatable measurements in repetitive inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Dial Bore Gauge With Counting Register 0.01 mm Resolution Matt Chrome Sleeve, DIN 863 - Metav IndustryLine
Take advantage of the combination of precise 0.01 mm resolution, a counting dial for unambiguous readings and a ratchet stop that ensures repeatable measuring force; order the instrument directly via Metav Werkzeuge or consult our experts for application support. M304.053 Micrometer — Counting dial, 50–75 mm, 0.01 mm (Metav IndustryLine) The M304.053 is a precision outside micrometer with a counting dial, built for accurate measurement of medium-sized components in workshop and inspection environments. Counting dial with 0.01 mm resolution Ratchet stop for consistent measuring force Hardened measuring faces for long life Matt chrome-plated measuring drum Precision where clear readings save time The instrument delivers a resolution of 0.01 mm, making it suitable for routine inspection tasks that require sub‑hundredth millimetre accuracy. The integrated counting dial simplifies multi‑turn readings by indicating full revolutions of the thimble, which reduces reading errors and speeds up measurement of larger increments. Compliance with DIN 863 ensures the measuring concept and scale graduations follow recognised workshop standards, providing a predictable basis for quality control and process documentation. Repeatable force for reliable results Equipped with a ratchet stop, the micrometer ensures a controlled contact pressure during each measurement. This mechanical regulation prevents over‑tightening and minimises variation between operators, which improves repeatability across a production batch. The spindle has a 0.5 mm pitch, combining sensible tactile feedback with fine adjustment, while a 6.5 mm spindle diameter gives sufficient stiffness for stable contact under normal workshop use. Built to withstand workshop conditions Critical wear surfaces are hardened, so the measuring faces resist abrasion and preserve accuracy over prolonged service life. The matt chrome‑plated measuring drum reduces glare and improves legibility in varied lighting conditions, while the robust construction and an overall weight of 0.75 kg give a reassuring, durable feel at the bench. The instrument is analog, which many inspection routines prefer for direct, battery‑free operation and simple integration into existing workflows. Suitable range and typical applications With a measuring span of 50–75 mm, this instrument covers shafts, bosses and medium‑sized machined parts commonly found in toolmaking, jigs and fixtures, and general engineering. The combination of 0.01 mm resolution, mechanical counting and hardened contact faces makes it a practical choice where straightforward, repeatable measurements are required without the need for digital data output. For procurement or application advice regarding the M304.053, contact Metav Werkzeuge in Emmerich — our specialists are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: M304.053 GTIN: 4054469116136 ECLASS: 21170328 ETIM: EC003590 Norm: DIN 863 Facts Measuring range: 50–75 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Weight: 0.75 kg Analog instrument Special features Counting dial Ratchet stop Hardened measuring faces Matt chrome‑plated measuring drum Category: Micrometers (outside micrometer) Story trigger: messschrauben FAQ How precise is the M304.053 for routine inspection tasks? The M304.053 provides a 0.01 mm resolution suitable for standard workshop inspections and quality checks where sub‑hundredth millimetre differentiation is required. Does the instrument prevent measurement variability between operators? Yes, the incorporated ratchet stop on the M304.053 enforces a consistent measuring force, reducing operator‑to‑operator variation and improving repeatability. Are the measuring faces durable for daily use? The measuring faces are hardened, which protects against wear and ensures maintained accuracy over frequent use in production and inspection environments. What kind of components is the 50–75 mm range best for? The 50–75 mm span is ideal for medium‑sized shafts, collars, housings and machined features commonly encountered in toolmaking and general engineering, where a compact, precise instrument is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Dial Bore Gauge With Large Drum And Friction Ratchet, Matt Chrome Drum, DIN 863 - Metav IndustryLine
Combine high-resolution 0.01 mm reading with a robust matt‑chrome plated thimble and a friction ratchet for consistent measuring force; this ensures repeatable external measurements for workshop and quality‑control tasks. Order the outside micrometer 50–75 mm (M304.250) directly via Metav Werkzeuge or ask our consultants if needed. Outside micrometer 50–75 mm (M304.250) – large thimble with friction ratchet, Metav IndustryLine A precision outside micrometer 50–75 mm designed for external diameter measurements in workshop and inspection environments, conforming to DIN 863. Large thimble for fine reading Friction ratchet for reproducible force Matt‑chrome plated thimble Supplied in protective case Consistent precision for production and inspection The instrument delivers a resolution of 0.01 mm, supported by a spindle pitch of 1 mm, which together provide straightforward, repeatable graduations on the thimble. The mechanical design, featuring a large thimble and clear scale divisions, reduces reading errors and speeds up routine checks. The inclusion of a friction ratchet regulates the applied measuring force so that every reading is comparable and independent of operator pressure—an important factor in reducing process variance and rework. Robust construction that promotes long service life Built to workshop standards, the micrometer uses a matt‑chrome plated drum that resists glare and supports precise reading under workshop lighting. The measuring faces are hardened, providing wear resistance and stable contact geometry for long‑term accuracy. With a weight of 0.8 kg the instrument feels substantial in hand, aiding stable placement during measurement; its classification within the standard 50–75 mm range makes it suitable for a broad set of machining and inspection tasks where reach and rigidity must be balanced. Practical operation tailored to industrial workflows Marked to DIN 863, the micrometer integrates familiar mechanical conventions so it fits seamlessly into existing quality routines and documentation. The friction ratchet ensures a constant measuring force, while the thimble scale and spindle pitch make incremental adjustments intuitive. Delivered in a protective case, the instrument is ready for transport and safe storage between shifts. Together these attributes support efficient measurement cycles and help maintain traceable, repeatable results on the shop floor. For reliable, workshop‑ready measuring tools from Metav IndustryLine, request further technical details or place an order for the Metav IndustryLine outside micrometer (M304.250) via Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M304.250 GTIN: 4054469116570 Category: Messschrauben Facts Measuring range: 50–75 mm Resolution: 0.01 mm Spindle pitch: 1 mm Spindle diameter: 8 mm Weight: 0.8 kg Special features DIN 863 compliance Large thimble Friction ratchet (ratchet stop) Matt‑chrome plated thimble Hardened measuring faces Supplied in protective case Analog instrument FAQ Is the accuracy sufficient for workshop quality control? The micrometer offers a 0.01 mm resolution and mechanical design compliant with DIN 863, making it well suited to standard workshop quality checks where this level of resolution meets measurement requirements. Does the instrument include a protective case for transport? Yes, the micrometer (M304.250) is supplied in a protective case to facilitate safe transport and storage between uses. How does the friction ratchet affect measurements? The friction ratchet on this outside micrometer ensures a consistent measuring force, which promotes repeatable readings and reduces the influence of operator‑dependent pressure. Are the measuring faces wear‑resistant? The measuring faces are hardened to provide long‑term wear resistance and to maintain stable contact geometry for sustained accuracy. Which standard does this micrometer follow? This instrument is manufactured to DIN 863, aligning with common mechanical micrometer conventions for industrial use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Digital Micrometer 0.001 mm Resolution, Friction Thimble, Auto-Off, Plastic Case - Metav IndustryLine
Take advantage of 0.001 mm resolution, hardened measuring faces and a user-friendly digital display to secure repeatable, shop-floor measurements with minimal adjustment. Combine precision, robust construction and low-maintenance operation for efficient quality control; order the instrument directly via Metav Werkzeuge or contact our consultants for application guidance. Digital Micrometre M302.006.N – 50–75 mm, 0.001 mm resolution (Metav IndustryLine) The Digital Micrometre M302.006.N is a compact, high-resolution external measuring tool designed for fine mechanical and workshop metrology across a 50–75 mm range. Resolution 0.001 mm for fine detail Measurement range 50–75 mm Digital display with ABS/INC/UNIT controls Auto-off feature to preserve battery life Precise control for critical tolerances The core advantage of this instrument is its 0.001 mm displayed resolution, which enables precise discrimination of small dimensional differences during inspection and set-up. In practice, that level of resolution reduces rework and accelerates pass/fail decisions on components manufactured to tight tolerances. Compliance with DIN 863 underlines conformity to established metrology practice and provides a reliable baseline for contractual inspections and routine quality checks. Practical digital functions that speed workflow A clear digital display paired with dedicated ON/OFF/SET and ABS/INC/UNIT keys simplifies zeroing, switching between absolute and incremental modes, and changing units. These functions cut the number of manual conversions and reduce operator error during repeated measurements. The AUTO-OFF feature conserves battery life, limiting interruptions in the production process and lowering running costs over time. Durable contact geometry for repeatable results Hardened measuring faces (6.5 mm diameter) provide a stable contact surface that resists wear and maintains measurement consistency over prolonged use. The compact 50–75 mm range places this micrometre in the micro category for workshop metrology, making it particularly suitable for small parts and precision assemblies where stiffness and short measuring spindles reduce bending and reading variability. Where this instrument adds most value This digital micrometre is ideal for precision engineering shops, toolrooms and laboratories requiring trustworthy external measurements at sub-micron display steps. The device supports standard quality-control tasks such as incoming inspection and in-process checks, and it integrates well into workflows that prioritise fast, reproducible measurement over extended production runs. Metav IndustryLine’s offering balances technical capability with pragmatic usability for everyday metrology. For tailored advice and procurement please contact Metav Werkzeuge GmbH to discuss the Metav IndustryLine digital micrometre and its suitability for specific applications — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M302.006.N GTIN: 4054469113814 Tariff number: 90173000 ECLASS: 21170328 ETIM: EC003590 Standard: DIN 863 Measurement range: 50–75 mm Resolution: 0.001 mm Digital: yes Digital display controls: ON/OFF/SET and ABS/INC/UNIT Auto-off: yes Facts Measuring faces diameter: 6.5 mm Einstellmass (setting gauge): from measuring range 25–50 mm Category: precision external micrometre Special features Hardened measuring faces Compact micro-range instrument for fine components Suitable for workshop and laboratory measurements Auto-off to extend battery life FAQ What accuracy can be expected from this digital micrometre? The Metav IndustryLine digital micrometre delivers a display resolution of 0.001 mm and is manufactured to meet DIN 863 standards, providing reliable repeatability for fine external measurements. Can the instrument switch between absolute and incremental readings? Yes, the instrument’s display supports ABS and INC modes via dedicated controls, enabling quick zeroing and incremental checks during inspection routines. Are the measuring faces wear-resistant? The measuring faces are hardened and 6.5 mm in diameter, designed to maintain contact integrity and repeatability under regular workshop use. Is this micrometre suitable for small precision parts and toolroom work? With a 50–75 mm range and high resolution, this micrometre is ideal for fine mechanical components, toolroom tasks and small assembly inspection where compactness and stiffness are advantageous. What digital functions help reduce operator error? Clear unit selection, zero setting and the ABS/INC toggle on the digital display reduce manual calculations and minimise the risk of transcription errors during repeated measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Digital Micrometer 0.001 mm Resolution, IP65, 2 mm Spindle Pitch, Hardened Measuring Faces, Supplied in Case - Metav IndustryLine
Take advantage of precise 1 µm resolution and robust IP65 protection for reliable shop-floor measurements; the micrometer’s friction ratchet and matt-chrome spindle ensure repeatable results in daily inspection routines. Order the digital micrometer directly via Metav Werkzeuge or ask our consultants for application advice. Digital micrometer M302.286 — 50–75 mm, IP65, 0.001 mm resolution (Metav IndustryLine) Digital micrometer M302.286 is a compact, robust outside micrometer designed for precise dimensional checks in fine mechanical workshops and quality control. IP65 protection for splash and coolant resistance Resolution 0.001 mm (1 µm) for fine-detail measurement Friction ratchet for consistent measuring force Conforms to DIN 863 for workshop accuracy Accuracy and robustness for repeatable inspection results The instrument provides a resolution of 0.001 mm, enabling sub-micron readback suitable for tight tolerances in precision manufacturing. The IP65 rating protects the electronics against coolant sprays and fine dust, which preserves measurement reliability during routine use. The built-in friction ratchet ensures that the same contact pressure is applied on each measurement, reducing variability caused by manual operation; this leads to more reproducible results across batches and operators. Practical design for everyday metrology tasks With a measuring range of 50–75 mm, this gauge falls into the compact class used for fine‑mechanical work, offering a balance between reach and rigidity. The frame is painted and the measuring spindle is matt chrome plated, giving corrosion resistance and smooth spindle action. The measuring faces (6.5 mm) provide a stable contact area for external dimensions, and the 2 mm spindle pitch offers predictable, wear‑resistant translation of spindle rotation to travel — useful when comparing repeated features. Digital interface and operator convenience The display features ON/OFF, ABS/INC, SET and UNIT functions for straightforward switching between absolute and incremental modes and for setting reference points. The clear numeric readout at 1 µm steps eliminates reading errors common with analogue devices and speeds up inspection cycles. For applications where traceable documentation is not mandated by ISO 17025, the micrometer supplies a clear, reproducible measurement that integrates well with shop-floor recording practices. Compliance and workplace integration Built to DIN 863 specifications, the micrometer meets recognised workshop standards for mechanical measuring tools. The combination of mechanical quality and sealed electronics makes it a reliable choice for production environments that require both repeatability and some environmental protection. The device’s compact footprint and familiar operating logic support fast adoption by skilled machinists and quality technicians alike. For precise external measurements where splash protection and 1 µm readback matter, contact Metav Werkzeuge for stock and technical advice on the M302.286 digital micrometer — Metav Werkzeuge can advise on suitable accessories and delivery to your site Technical data Article number: M302.286 GTIN: 4054469115597 Manufacturer: Metav IndustryLine Facts Measuring range: 50–75 mm Resolution / display: 0.001 mm Spindle pitch: 2 mm Measuring faces diameter: 6.5 mm Protection class: IP 65 Display/buttons: ON/OFF, ABS/INC, SET, UNIT Standard: DIN 863 Customs tariff number: 90173000 Special features Friction ratchet for consistent measuring force Frame painted, measuring spindle matt chrome plated Digital output: device is digital (no external data output field provided) Category: Micrometers / Messschrauben FAQ What is the smallest increment the micrometer shows? The digital micrometer offers a resolution of 0.001 mm (1 µm), enabling very fine measurement steps suitable for precision inspection. Is the instrument suitable for use near coolants or fine dust? Yes, the IP65 rating means the micrometer resists splashes and dust ingress, making it appropriate for many shop‑floor conditions. Does the micrometer comply with recognised metrology standards? The gauge conforms to DIN 863, indicating it meets standard workshop requirements for outside micrometers. What does the friction ratchet do for measurements? The friction ratchet provides a uniform contact pressure when measuring, which improves repeatability and reduces operator‑dependent variation. Which measuring range category does this device fall into? With a measuring range of 50–75 mm, the instrument is classified among compact micrometers intended for fine mechanical tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Digital Micrometer 0.001 mm Resolution, Ratchet, Matt Chromium Measuring Drum, Plastic Case - Metav IndustryLine
Take advantage of the combination of digital precision, robust construction and a ratchet stop for a reliable measurement workflow. Order the Digital Micrometer M302.256 directly via Metav Werkzeuge or ask our consultants if needed Digital Micrometer M302.256 — 50–75 mm, 0.001 mm resolution (Metav IndustryLine) The Digital Micrometer M302.256 is a workshop-grade external micrometer designed for precise component measurement in the 50–75 mm range, ideal for metalworking and quality control applications 0.001 mm resolution display ON/OFF, ABS/INC and unit functions Ratchet stop for consistent measuring force Delivered in protective case Accuracy that speeds up inspection and reduces rework The M302.256 combines a clear digital display with an ultra-fine 0.001 mm readout to shorten inspection cycles and reduce transcription errors. The display includes ON/OFF, SET, ABS/INC and UNIT functions so absolute and incremental readings are available at a glance, which streamlines measurement routines in production and QA environments. The high-resolution readout supports tighter tolerances and quicker decision-making on the shop floor, helping to cut reject rates and save machining time. Built for repeatability and everyday workshop use Repeatable results are supported by the integrated ratchet stop, which standardises measuring force and minimises variability between operators. The instrument's 6.5 mm measuring faces and combination of a painted frame with a matt‑chromed measuring spindle provide a balance of wear resistance and comfortable handling. Supplied in a protective case, the micrometer is protected during transport and storage, ensuring the measuring faces and spindle remain free from damage that could compromise accuracy. Suits industrial workflows and recognised standards Manufactured to DIN 863, this digital micrometer is a practical choice for production measurement tasks and incoming inspection. Its measuring range of 50–75 mm positions it well for medium-sized parts such as shafts, housings and turned components. Backed by Metav's distribution and quality filter in Emmerich, the instrument benefits from dependable availability and consistent product checks, reflecting Metav's commitment to making precise measurement accessible across workshops and industry. Choose Metav IndustryLine precision micrometers like the M302.256 and contact Metav Werkzeuge for availability and tailored advice on integrating them into inspection routines Technical data Article number: M302.256 GTIN: 4054469151748 Category: Messschrauben Facts Measuring range: 50–75 mm Resolution: 0.001 mm Measuring faces: 6.5 mm Special features Digital display: ON/OFF/SET, ABS/INC/UNIT Ratchet stop Material: frame painted, spindle matt chrome Standard: DIN 863 Delivered in protective case FAQ What measurement resolution does the micrometer provide? The Digital Micrometer M302.256 delivers a resolution of 0.001 mm, enabling fine incremental readings for tight tolerance checks. Is this instrument suitable for routine workshop quality control? Yes, the device is intended for workshop and production use; its digital readout and repeatable ratchet mechanism support fast, reliable inspection processes. How does the ratchet stop improve measurement results? The ratchet stop on the micrometer ensures a consistent measuring force between readings, reducing operator-induced variation and improving repeatability. Which standard does the micrometer conform to? The instrument is manufactured to DIN 863, aligning it with common industry expectations for external micrometers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Digital Thimble Micrometer 0.001 mm Resolution, Ratchet, Protected Finish, Supplied in Case - Metav IndustryLine
Combining 0.001 mm digital resolution, a ratcheted spindle and a non‑rotating spindle provides reproducible measurements across the 50–75 mm span, supporting reliable quality control and workshop inspection tasks. Order the digital flat‑anvil micrometer directly via Metav Werkzeuge or contact our consultants for tailored advice. Digital flat‑anvil micrometer M302.252.C (50–75 mm, 0.001 mm) — Metav IndustryLine The Digital flat‑anvil micrometer M302.252.C is a precision measuring instrument for outside‑dimension and thickness checks in workshop, toolroom and inspection environments. Digital display 0.001 mm resolution Measuring range 50–75 mm Ratcheted spindle for reproducible contact Supplied in a protective transport case Precise measurement performance for routine inspection The digital flat‑anvil micrometer is designed for repeatable, traceable measurements in production and quality assurance. With a resolution of 0.001 mm and a declared accuracy of 0.005 mm, the instrument narrows measurement uncertainty for critical outside‑dimension checks within the 50–75 mm range. The ratcheting mechanism ensures consistent contact force, while the non‑rotating spindle prevents workpiece rotation during closure, reducing handling errors. Together these characteristics make the micrometer suitable for dimensional control on turned, milled or ground components where small deviations affect assembly or function. Ergonomics and data handling to speed up workflows Ease of use and connectivity minimise process delays. The instrument features a clear digital readout with ON/OFF, ABS/INC, UNIT and SET functions to switch references and units quickly; data transfer is possible via the RB 4.1 data output for direct capture into inspection or SPC systems. The matt‑chrome measuring drum and painted frame provide robust surfaces for daily use, while the ratchet and balanced weight (approx. 1.1 kg) enable steady one‑hand operation. Supplied in a protective transport case, the tool is ready for safe storage and on‑site inspection rounds, reducing downtime and safeguarding calibration. Built for workshop resilience and traceable results Materials and design focus on reliable service life and clear results: the frame is painted for corrosion resistance and the measuring faces are matt chrome‑plated to preserve contact quality. The digital readout provides fast numeric feedback to support decision‑making at the bench or in the measuring room. For suppliers and maintenance teams who require consistent documentation, the built‑in data output supports integration with data‑logging equipment. The combination of tactile features, digital accuracy and a compact protective case delivers a practical metrology solution for everyday production control and sampling inspections. For a precision tool that combines fine resolution, repeatable contact and digital connectivity, contact Metav Werkzeuge to arrange purchase details or application advice for the Metav IndustryLine digital micrometer M302.252.C. Technical Data Article number: M302.252.C GTIN: 4054469115504 Manufacturer: Metav IndustryLine Data output: RB 4.1 Facts Measuring range: 50–75 mm Resolution (display): 0.001 mm Accuracy: 0.005 mm Weight: 1.1 kg Special features Ratchet for reproducible contact Non‑rotating spindle Digital display with ON/OFF, ABS/INC, UNIT, SET Frame painted; measuring drum matt chrome‑plated Protective transport case Tariff number: 90173000 FAQ What resolution and accuracy does the micrometer offer? The Metav IndustryLine digital flat‑anvil micrometer M302.252.C provides a display resolution of 0.001 mm and a specified accuracy of 0.005 mm, suitable for workshop and inspection use. Does the spindle include a ratchet and prevent workpiece rotation? Yes. The instrument is equipped with a ratcheting mechanism for reproducible contact and a non‑rotating spindle to avoid rotating the workpiece during measurement. How is the micrometer delivered and protected in transit? The micrometer is supplied in a protective transport case to safeguard the instrument during storage and transport. Can measurement results be exported electronically? Measurement data can be exported via the RB 4.1 data output provided on the instrument for connection to data loggers or SPC systems. What are the measuring face and frame materials? The frame is painted for durability and the measuring drum / faces are matt chrome‑plated to maintain stable contact properties. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Digital Thread Micrometer With 60° Setting, Ratchet, IP65, Supplied In Case - Metav IndustryLine
Combine high-resolution digital measurement with a ratchet thimble and non-rotating spindle to ensure repeatable, workshop-ready thread inspection; order the digital thread micrometer directly via Metav Werkzeuge or ask our consultants if needed Digital Thread Micrometer M302.193.D – 50–75 mm, Digital Readout Digital Thread Micrometer M302.193.D for precise external thread measurement in the 50–75 mm range, designed for quality control and production inspection with a ratchet thimble and data interface High-resolution 0.001 mm display Accuracy ±0.01 mm for dependable results Non-rotating measuring spindle for stability Precision that supports consistent thread inspection The digital readout with a resolution of 0.001 mm and an accuracy of ±0.01 mm delivers the numerical certainty required in production control and inspection. The instrument’s measuring principle is optimised for external thread measurement, so the non-rotating measuring spindle minimises torsion and protects the thread profile during measurement; this reduces operator-induced error and improves repeatability. The integrated ratchet thimble ensures constant measuring force, which further stabilises readings and supports reliable pass/fail decisions on the shop floor. Ease of use and robust workshop handling Ergonomics and reproducibility are addressed by the combination of the ratchet, a stable spindle design and a clear, function-led display (ON/OFF, ABS/INC, UNIT, SET). The instrument is supplied without measuring inserts and includes a 60° setting gauge, simplifying setup for standard thread checks. Delivered in a protective case, the micrometer remains transport-ready and shielded from workshop contaminants, enabling secure storage between measurement tasks. The compact balance of mass and handling supports quick, single-operator measurements across repeated cycles. Integrating measurement into quality workflows Equipped with an RB 4.1 data output, the micrometer supports digital capture of results for traceability and integration into measurement logs or SPC systems. The display’s incremental and absolute modes ease quick zeroing and transfer of values, while the data interface enables automated recording to reduce transcription errors and speed up quality documentation. This connectivity promotes a rational workflow that lowers inspection time per part and supports systematic quality assurance. Built for dependable daily use Constructed for routine workshop use, the instrument’s specifications and functional design prioritise longevity and stable performance under repeated handling. A measured weight of approximately 0.6 kg gives a reassuring hand feel without excessive bulk. The device’s mechanical and electronic combination reduces the need for repeated manual conversions and supports efficient inspection routines in maintenance, tooling and production environments. Where process reliability matters, this micrometer provides an immediate upgrade from basic mechanical gauges. For reliable thread measurement with Metav IndustryLine precision, contact Metav Werkzeuge for a detailed specification sheet, compatibility advice or a tailored quotation: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M302.193.D GTIN: 4054469115184 Category: Messschrauben Brand: Metav IndustryLine Facts Measuring range: 50–75 mm Resolution (display): 0.001 mm Accuracy: ±0.01 mm Weight: 0.6 kg Spindle diameter: 6.5 mm Tariff number: 90173000 Features Digital display with ON/OFF, ABS/INC, UNIT and SET RB 4.1 data output for digital transfer Ratchet thimble for constant measuring force Non-rotating measuring spindle for thread protection Delivered in protective case Supplied without measuring inserts Includes 60° setting gauge FAQ How precise are the measurements with this micrometer? The Digital Thread Micrometer M302.193.D provides a display resolution of 0.001 mm and an accuracy of ±0.01 mm, offering the precision expected for routine workshop and production inspection. Can measurement data be exported electronically? Yes. The instrument features an RB 4.1 data output, allowing direct transfer of readings into data-collection systems or quality software to reduce manual logging. Is the micrometer suitable for repeated shop-floor use? Built for workshop reliability, the micrometer combines a ratchet thimble and a non-rotating spindle to reduce wear on threads and deliver consistent results during frequent use. Does the delivery include accessories for setup? The micrometer is supplied without measuring inserts but includes a 60° setting gauge and comes in a protective case for safe transport and storage. What functions does the digital display offer? The display supports ON/OFF, absolute/incremental modes (ABS/INC), unit selection and a SET function for straightforward zeroing and measurement workflow control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Digital Universal Micrometer 0.001 mm Resolution, Sliding Anvil, Supplied with 7 Pair Inserts, Plastic Case - Metav IndustryLine
Take advantage of the combination of laboratory-grade resolution, practical measuring range and interchangeable anvils for consistent, repeatable results in fine mechanical work; order the instrument directly via Metav Werkzeuge or consult the specialists for application advice. Digital universal micrometer M302.142.D — 50–75 mm, 0.001 mm resolution (Metav IndustryLine) The Digital universal micrometer M302.142.D is a precision measuring instrument for workshop and inspection tasks, designed for accurate external, internal and step measurements across a compact 50–75 mm range. *High-resolution 0.001 mm display *Compact 50–75 mm measuring range *Seven pairs of interchangeable anvils included *Ratchet stop and rotating spindle for reproducible force Precision tailored for small components The instrument offers 0.001 mm resolution, delivering fine graduation suitable for demanding inspection tasks in toolmaking and quality control. Classified in the micro range (measuring range up to 100 mm), this design combines short, stiff measuring faces with a compact frame so that repeatability and low deflection are maintained when checking small shafts, threads or machined parts. The matt chrome-plated measuring drum provides a durable, low-reflective surface for clear readings and long-term wear resistance. Consistent measuring force and flexible contacts A ratchet stop and a rotating measuring spindle (6.5 mm) ensure a reproducible contact force, reducing operator-introduced variation during routine checks. The device includes seven pairs of interchangeable anvils, enabling measurement of diverse geometries without compromising accuracy. The sliding anvil extends the instrument’s versatility for slightly longer parts, while the digital readout with ON/OFF, ABS/INC, UNIT and SET functions simplifies unit changes and zeroing for efficient test cycles. Digital convenience for inspection workflows The electronic module supports standard workshop routines with an easily readable display and a data output: RB 4.1, allowing connection to data-logging systems where traceable records are required. The solid construction and practical weight of 1.1 kg make handling straightforward on the bench. Supplied with a protective case and a full set of measuring inserts, the micrometer is ready for immediate use in quality control or production sampling. Contact Metav Werkzeuge for precise specifications and application support for the Metav IndustryLine digital micrometer M302.142.D with 0.001 mm resolution Technical data SKU: M302.142.D GTIN: 4054469114866 Category: Messschrauben Norm: Werksnorm Facts Measuring range: 50–75 mm Max measuring range (mm): 75 Resolution / reading: 0.001 mm Weight: 1.1 kg Measuring spindle diameter: 6.5 mm Number of insert pairs: 7 Tariff number: 90173000 Special features Digital display with ON/OFF, ABS/INC, UNIT and SET Ratchet stop for reproducible force Sliding (movable) anvil for extended reach Measuring drum matt chrome-plated Delivered in protective case with seven pairs of measuring inserts Data output: RB 4.1 Category path: Messgeräte → Messschrauben eClass: 21170328, ETIM: EC003590 FAQ What measuring range does this micrometer cover? The Metav IndustryLine digital micrometer covers a measuring range of 50–75 mm, suitable for micro‑class measurements of small components. What resolution and accuracy can be expected? The instrument provides a resolution of 0.001 mm; the high display granularity is designed for fine inspection tasks and laboratory‑grade repeatability. Are interchangeable anvils included? Yes, the micrometer is supplied with seven pairs of measuring anvils, enabling adaptation to different workpiece geometries without additional purchases. Does the micrometer support data transfer to inspection systems? The device offers data output RB 4.1, permitting connection to compatible data‑logging or quality‑management systems for traceable measurement records. Is the micrometer supplied ready for workshop use? The product is delivered complete with measuring inserts and a protective case, making the micrometer ready for immediate use in production or inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Micrometer Caliper Ratchet Thimble 0.01 mm Resolution, Powder-Coated Blue, DIN 863, Plastic Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm resolution, a ratchet stop for repeatable contact pressure and a hardened measuring face set for reliable readings in routine inspection; order directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Outside Micrometer M304.410 — 50–75 mm, 0.01 mm ratchet stop The Metav IndustryLine Outside Micrometer M304.410 is a robust workshop instrument for external measurements between 50 and 75 mm, equipped with a ratchet stop and a 0.01 mm thimble graduation for consistent, repeatable results. 0.01 mm graduation Ratchet stop for repeatable contact Powder‑coated frame, matt‑chrome thimble Hardened measuring faces for longevity Precision that keeps production moving A mechanical micrometer with a 0.01 mm graduation provides precise, traceable readings for day‑to‑day dimensional control. The integrated ratchet stop ensures consistent measuring force, reducing operator‑induced variation and improving repeatability on serial parts. With a spindle pitch of 0.5 mm, each thimble turn corresponds predictably to axial travel, making coarse and fine alignment intuitive. Compliance with DIN 863 signals suitability for workshop and shop‑floor quality checks, where robust, easy‑to‑interpret gauges accelerate inspection routines. Durable design for regular workshop use The instrument pairs a powder‑coated frame with a matt‑chrome measuring drum, combining corrosion resistance and low glare for comfortable reading. The measuring faces are hardened, which increases wear resistance and secures long service life even under regular contact with ferrous components. A measuring spindle diameter of 6.5 mm adds stiffness at the contact point, aiding stable measurements on machined surfaces. The overall construction focuses on practical endurance, reducing downtime for maintenance and ensuring reliable performance in metalworking environments. Practical handling and application clarity As a mechanical, analogue instrument with a clear thimble scale, the micrometer supports quick checks without battery reliance, ideal for busy production lines or mobile inspection tasks. The tool is classified among workshop micrometers and is suited to standard machining and fabrication tasks where external dimensions must be verified. Supplied ready for transport in a protective case, the device is straightforward to store and to move between workstations. For integration into quality workflows, the simple, tactile operation complements digital systems where required without complicating procedures. For precise external measurement and dependable workshop performance, contact Metav Werkzeuge for ordering or specific application guidance by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M304.410 GTIN: 4054469116891 Manufacturer: Metav IndustryLine Facts Measuring range: 50–75 mm Graduation: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Standard: DIN 863 Analog (mechanical) Special features Ratchet stop Powder‑coated frame (blue) Measuring drum matt‑chrome Hardened measuring faces Supplied in a protective transport case Category: Micrometers Customs tariff number: 90173000 ECLASS: 21170328 ETIM: EC003590 FAQ How accurate is the micrometer for routine inspection? The Metav IndustryLine outside micrometer M304.410 offers a 0.01 mm graduation and is built to DIN 863, providing the accuracy expected for standard workshop quality control. Does the instrument help avoid operator error during measurement? Yes, the integrated ratchet stop ensures consistent contact pressure, which reduces variability caused by differing hand forces and supports repeatable readings. What materials are the measuring faces and frame made from? The frame is powder‑coated for corrosion resistance and the measuring drum is matt‑chrome plated; the measuring faces are hardened to improve wear resistance during repeated use. Is the micrometer supplied ready for transport and storage? The micrometer is supplied in a protective transport case to simplify storage and safe transfer between workstations. Which applications is this micrometer suited to? The tool is designed for external dimensional checks in machining, metal fabrication and general workshop inspection tasks where a reliable analogue gauge is preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Outside Micrometer Thimble Matt Chrome, Ratchet Stop, 0.01 mm Resolution, Supplied in Case - Metav IndustryLine
Taking advantage of the ratchet stop and the matt‑chrome measuring thimble, this micrometer delivers repeatable external measurements across its 50–75 mm span; combine reliability, clear analogue readout and workshop‑grade construction for consistent quality control. Order via Metav Werkzeuge or consult our specialists for application advice. Micrometer M304.610 — 50–75 mm micrometer with ratchet stop and matt‑chrome thimble (Metav IndustryLine) The Micrometer M304.610 is a precision external micrometer designed for routine workshop and quality‑control measurements in mechanical engineering and metalworking. Ratchet stop for consistent measuring Matt‑chrome measuring thimble Conforms to DIN 863 Measuring range 50–75 mm Dependable repeatability for routine measuring The combination of a ratchet stop and a finely graduated analogue thimble ensures repeatable contact force and straightforward readings. With a resolution of 0.01 mm on the scale and a spindle pitch of 0.5 mm, the instrument translates small hand movements into precise displacement, reducing operator variability. The mechanical design prioritises stable measurement behaviour, making the tool suitable for repetitive inspection tasks where process reliability and fast throughput are required. Robust build for everyday workshop use A painted frame paired with a matt‑chrome measuring thimble gives the instrument both protection and a corrosion‑resistant contact surface. The construction adheres to DIN 863, supporting standardised use within inspection routines and interchangeability in production environments. Supplied in a protective transport case for safe handling and storage, this micrometer is prepared for workshop conditions and frequent transport between workstations or inspection benches, offering durability without compromising ease of use. Practical handling, maintenance and traceability Ergonomic features such as the ratchet mechanism and smooth thimble rotation support quick, fatigue‑reduced measuring cycles, while the compact spindle geometry (6.5 mm spindle diameter) helps access smaller measuring positions. For traceability in production control, the device is identified as M304.610 and integrates readily into existing measurement workflows. Basic care—keeping the spindle clean, applying minimal lubrication and avoiding shock—preserves accuracy and extends service life, supporting consistent measurement results day after day. Contact Metav Werkzeuge in Emmerich for tailored advice on application suitability or to request order information by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M304.610 GTIN: 4054469117157 Category: Micrometers Norm: DIN 863 eClass: 21170328 ETIM: EC003590 Customs tariff number: 90173000 Facts Measuring range: 50–75 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Analog: yes Special features Material: painted frame and matt‑chrome measuring thimble Ratchet stop for repeatable contact force Analogue thimble measurement drum Protective transport case for delivery SKU: M304.610 FAQ Is this micrometer suitable for routine workshop inspections? Yes. The Micrometer M304.610 is designed for regular external measurements in workshop and production environments, offering robust construction and a ratchet stop for consistent readings. What measurement resolution does the instrument provide? The device provides a 0.01 mm resolution on the analogue scale, making it suitable for standard workshop tolerances and routine quality checks. Does the micrometer comply with industry standards? Compliance with DIN 863 is specified for the micrometer, ensuring compatibility with common inspection procedures and standards used in metalworking. How is the micrometer delivered and protected during transport? The micrometer is supplied in a protective transport case to safeguard the instrument during delivery and handling between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75 mm Universal Micrometer 0.01 mm Resolution, Adjustable Anvil, 7 Interchangeable Inserts, Supplied in Case - Metav IndustryLine
Combine 0.01 mm resolution with a movable anvil and ratchet stop to secure repeatable measurements and reduce operator influence; ideal for precision inspection and batch control. Order the micrometer directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Uni. Micrometer M309.172 — 50–75 mm, 0.01 mm resolution (Metav IndustryLine) The Uni. Micrometer M309.172 is an analogue inspection micrometer designed for accurate external measurements in workshop and inspection environments across a 50–75 mm range. High precision 0.01 mm graduation Movable anvil for adaptable measuring depths Ratchet stop for consistent measuring force Includes 7 pairs measuring inserts Reliable precision for quality control The Uni. Micrometer M309.172 delivers 0.01 mm graduation combined with a robust 6.5 mm spindle, offering a solid foundation for repeatable external measurements. The integrated ratchet stop limits operator-applied force, which improves reproducibility and reduces wear on the spindle tip — a pragmatic advantage during series inspection. As an analogue instrument, it provides direct tactile feedback that many technicians prefer for fine adjustment and verification tasks. This configuration supports routine quality checks and first-article inspection in small-batch production. Flexible handling for varied workpieces A movable anvil broadens the range of geometries that can be checked without additional tooling, while the supplied 7 pairs of measuring inserts make the instrument ready for different contact profiles straightaway. The matt chrome-plated measuring drum reduces glare and improves scale readability under workshop lighting. These features combine to shorten setup time and increase throughput: fewer tool changes are required and measurements can be completed with steady hand positioning. The instrument’s balance and finish also aid comfortable, controlled operation during repetitive measurement cycles. What is supplied and how to care for it Delivery includes the micrometer fitted with the rotating spindle and ratchet stop plus 7 pairs of measuring inserts and a protective case for transport and storage. The unit is manufactured to factory standard (Werksnorm) and is supplied ready for immediate use; routine care — keeping faces clean, protecting against knocks, and storing in the case after use — prolongs service life and maintains accuracy. The analogue scale is straightforward to interpret and, when required, the instrument can be referenced against traceable standards to integrate into a formal inspection routine. Contact Metav Werkzeuge in Emmerich to discuss how the M309.172 micrometer fits into existing inspection procedures or to request information about calibration options and workshop delivery. Technical Data Article number: M309.172 GTIN: 4054469118505 Category: Messschrauben Facts Measuring range: 50–75 mm Resolution: 0.01 mm Spindle diameter: 6.5 mm Weight: 1.1 kg Special features Analogue measurement drum, matt chrome-plated Movable anvil Ratchet stop for reproducible measuring force 7 pairs of measuring inserts included Supplied in a protective case Manufactured to Werksnorm Rotating measuring spindle FAQ What accuracy can be expected from this micrometer? The Uni. Micrometer M309.172 offers a graduation of 0.01 mm; with careful handling the ratchet stop and solid spindle provide high repeatability suitable for workshop inspection. Are measuring inserts included with the instrument? Yes, the delivery of the M309.172 includes seven pairs of measuring inserts to cover a range of contact geometries. Does the micrometer come with a protective case? The M309.172 is supplied in a protective case, which aids safe transport and storage of the instrument and its inserts. Is the spindle designed to rotate and why does that matter? The micrometer features a rotating spindle (6.5 mm diameter), which promotes smooth movement and precise closure control, improving measurement reliability. Which applications suit this micrometer best? Designed for external measurements in workshops and small-series inspection, the M309.172 is particularly useful where tactile control and quick adaptation with inserts are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75mm Dial Bore Gauge Digital IP65, 0.006mm Resolution, Ø12mm Measuring Faces - Microtech Metrology
Compact precision with robust protection: the combination of a digital readout, IP65 protection and a measuring range of 50–75 mm ensures reliable shop-floor performance and traceable results. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Micrometer 50–75 mm — digital micrometer, IP65, Microtech Metrology A Micrometer 50–75 mm designed for accurate external measurements of shafts, bearings and medium-sized components in industrial and workshop environments. Digital display with 0.001 mm resolution IP65 dust and water resistant design High repeatability with 0.006 mm accuracy Precision that pays off in production The instrument delivers a reading resolution of 0.001 mm combined with a proven accuracy of 0.006 mm, which reduces measurement uncertainty in routine quality checks. The finely finished Ø12 mm measuring faces provide stable contact and consistent seating on curved or flat surfaces, improving repeatability during serial inspection. Such measurable precision supports more reliable process control and fewer downstream rejects, making the device a practical investment for machining and inspection tasks. Easier measurement on the shop floor A clear digital readout removes ambiguity from analogue reading and speeds up inspection sequences. The electronic display reads in steps of 0.001 mm, shortening cycle times and lowering the risk of transcription errors in quality records. The device’s robust electronics and intuitive interface mean operators can focus on efficient measurement rather than interpretation, increasing throughput without sacrificing accuracy. Built for tough environments Engineered to meet IP65 protection, the micrometer tolerates dust ingress and low-pressure water jets, which makes it suitable for busy workshop conditions where coolant mist, chips or fine dust are common. The sealed design protects the measuring system and prolongs service life, reducing maintenance intervals and contributing to dependable uptime in production environments. Practical applications and documentation With a measuring range from 50 to 75 mm, the instrument is suited to components such as medium-sized shafts, bearing journals and machined housings. The device is classified for industrial metrology tasks and integrates easily into standard inspection routines. Supplied data such as SKU 133800751 and GTIN support traceability and procurement workflows, while the digital format facilitates logging measurements into quality systems when required. Contact Metav Werkzeuge for technical advice, availability and application support for the Microtech digital micrometer; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 133800751 GTIN: 4061905458118 Manufacturer: Microtech Metrology ECLASS: 21170328 Numbers / Core technical data Measuring range: 50–75 mm Resolution (display): 0.001 mm Stated accuracy: 0.006 mm Measuring faces diameter: Ø12 mm Protection class: IP65 Special features Digital readout Robust, sealed construction for workshop use Suited to external measurements of shafts and housings Category: micrometer (industrial measuring instrument) FAQ What measuring range does the instrument cover? The micrometer covers a measuring range of 50–75 mm, suitable for medium-sized external measurements and workshop inspection tasks. What accuracy and resolution can be expected? The Microtech digital micrometer offers a resolution of 0.001 mm and a stated accuracy of 0.006 mm, ensuring precise and repeatable results for production checks. Is the device protected for workshop environments? Yes—the tool is rated IP65, making the electronics and measurement system resistant to dust ingress and low-pressure water jets common in industrial settings. Can the measuring faces cope with curved surfaces? The Ø12 mm measuring faces are designed to provide stable contact on both cylindrical and flat surfaces, improving repeatability during serial inspections. How is the product identified for procurement and traceability? The item is listed under SKU 133800751 with GTIN 4061905458118, which supports ordering and quality-system documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Dial Bore Gauge With Interchangeable Dial, 0.01mm Resolution, Case Included - Metav IndustryLine
Combine 50–75 mm measuring range with 0.01 mm resolution and enhanced repeatability for dependable series inspection; robust matt‑chrome plating and hardened measuring faces ensure long service life. Order the micrometer directly via Metav Werkzeuge or ask our consultants if specialist advice is required. Micrometer M307.110 with Dial Gauge — 50–75 mm, 0.01 mm (Metav IndustryLine) The Micrometer M307.110 with dial gauge is a mechanical precision micrometer designed for high‑repeatability batch measurement in production and quality control. 50–75 mm measuring range 0.01 mm readable dial Enhanced repeatability for series inspection Hardened measuring faces Matt chrome‑plated frame and drum Consistent accuracy for repetitive production The M307.110 delivers a 0.01 mm reading on an analogue dial, making it suitable where tight tolerances and repeatability are required during serial inspection. The instrument’s repeatability and clearly graduated dial reduce operator variation and speed up go/no‑go decisions at the measuring station. A spindle pitch of 0.5 mm provides predictable displacement per rotation, allowing controlled approach to the workpiece and consistent contact behaviour for repeated measurements. Robust construction for everyday workshop use A matt‑chrome finish on the frame and measuring drum protects against handling wear and simplifies cleaning after use in workshop environments. The hardened measuring faces resist indentation and edge wear, helping to preserve metrological characteristics over time. The mechanical dial design requires no batteries and gives an immediate visual indication of deviation, which supports fast inspection cycles and lowers downtime for simple routine checks. Compact range tailored to precision components With a measuring span of 50–75 mm, this instrument sits within the compact measuring segment that is often preferred for component and subassembly inspection. The configuration is especially advantageous for repetitive checks on turned or milled parts where a stable, high‑repeatability method is needed. Supplied in a protective case, the micrometer is ready for safe transport between workstations and for secure storage when not in use, helping to maintain calibration integrity and prolong service life. Request the Metav IndustryLine M307.110 from Metav Werkzeuge for reliable series measurement and local dispatch from Emmerich — our team can advise on suitability for specific inspection tasks Technical data Article number: M307.110 GTIN: 4054469117430 Category: Micrometers (Messschrauben) Brand: Metav IndustryLine Facts Measuring range: 50–75 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Tariff number: 90173000 Reading type: Analogue (dial gauge) Special features Matt‑chrome plated frame and measuring drum Hardened measuring faces for wear resistance Higher repeatability, ideal for series measurements Delivered in a protective case Mechanical dial indicator for immediate readings FAQ What reading resolution and accuracy does the micrometer offer? The instrument provides a 0.01 mm dial reading; this resolution supports reliable repeatability for workshop and production checks. Is the M307.110 suitable for serial inspection in production? Yes, the M307.110 from Metav IndustryLine is designed with enhanced repeatability specifically for series inspection and quality control routines. Are the measuring faces hardened to resist wear? The micrometer is equipped with hardened measuring faces to reduce wear and maintain measurement integrity over time. Does the product include a protective case for transport and storage? A protective case is included to safeguard the instrument during transport between workstations and for longer‑term storage. Is the indicator digital or mechanical? The device uses an analogue dial gauge, providing a battery‑free visual display for quick assessments Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75mm Digital Blade-Point Micrometer Friction Thimble, IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a compact digital design that combines IP65 protection, a blade‑style anvil and fine resolution for consistent edge measurement; the instrument is supplied with an ISO 17025 calibration certificate for traceable quality. Order the micrometer via Metav Werkzeuge or request technical advice from our consultants. Micrometer "CertiMet BLADE" – digital micrometer, IP65, blade anvils 6.5 x 0.75 mm (Microtech Metrology) A CertiMet BLADE digital micrometer for precise outside measurements of thin edges and blades, covering the 50–75 mm measuring range with high repeatability IP65-protected aluminium housing ISO17025 calibration certificate included Blade anvils 6.5 x 0.75 mm Resolution 0.001 mm; accuracy ±0.005 mm Precise edge measurement that speeds decision-making on the shop floor The instrument delivers sub-micron readout fidelity via a 0.001 mm display and maintains an operating accuracy of ±0.005 mm, making it a reliable choice for quality control on thin or narrow parts. The non-rotating spindle and dedicated blade anvil (6.5 x 0.75 mm) concentrate the contact area for repeatable outside measurements of blades, lips and thin flanges; the friction thimble ensures consistent measuring force to reduce operator-induced variation. These characteristics translate into fewer reworks and faster go/no-go decisions during batch inspection. Robust build and ergonomic operation for daily industrial use Encased in an aluminium housing with IP65 ingress protection, the instrument resists dust and low-pressure water jets, which extends service life in workshop environments. The friction thimble micrometer head and the non-rotating spindle allow controlled advance and precise contact, while the digital readout provides standard functions — mm/inch, origin, hold — accessed via 0/MODE-, SET-, UNIT- and HOLD-buttons. This combination of robust materials and intuitive controls reduces measurement time while supporting consistent documentation of results. Traceable calibration and targeted applications for production and lab environments A calibration certificate to ISO 17025 (Ilac MRA) is supplied, confirming traceability and making the instrument suitable for incoming inspection, process control and laboratory use where documented accuracy is required. The small blade anvils are optimised for narrow edge measurement and complement applications in blade manufacturing, precision tool inspection and thin‑walled component checks. The instrument’s specification supports integration into standard QA routines without the need for extensive operator retraining. For traceable blade measurement from Microtech Metrology backed by an ISO 17025 certificate, contact Metav Werkzeuge in Emmerich for personalised technical guidance and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 110660751 GTIN: 4061905457180 Manufacturer: Microtech Metrology Measuring range: 50–75 mm Resolution: 0.001 mm Accuracy: ±0.005 mm IP protection: IP65 Measuring faces: 6.5 x 0.75 mm Digital display: with 0/MODE, SET, UNIT and HOLD buttons Calibration: ISO 17025 certificate included Facts Measuring range: 50–75 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Anvil dimensions: 6.5 x 0.75 mm Protection class: IP65 Special features Aluminium housing Friction thimble micrometer head Non-rotating spindle with blade anvil Functions: mm/inch, origin, hold Supplied with ISO 17025 calibration certificate FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 50–75 mm and is suitable for outside measurements within that span. Is the measuring face suitable for thin blades and edges? Yes; the instrument uses blade‑style measuring faces (6.5 x 0.75 mm) designed specifically for narrow edges and thin flanges. Does the device include a calibration certificate? A calibration certificate to ISO 17025 (Ilac MRA) is supplied with the micrometer, guaranteeing traceability of the measurement results. How does IP65 protection benefit workshop use? IP65 protection reduces the risk of dust ingress and resists low-pressure water jets, supporting reliable operation in demanding workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Digital Micrometer 0.004mm Accuracy Color 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high measurement precision, seamless wireless/USB data transfer and traceable ISO 17025 calibration for reliable gear inspection and process integration. Order the micrometer directly via Metav Werkzeuge or ask our consultants for application advice. Digital Micrometer 50–75 mm by Microtech Metrology — 2.4" colour touchscreen, Wireless + USB The Digital Micrometer 50–75 mm is a workshop-grade measuring instrument designed for precise outside measurements on gears and similar components in production and inspection environments. 50–75 mm measurement range ±0.004 mm accuracy Wireless and USB data output 2.4" colour touchscreen display Precision that supports dependable decisions The instrument delivers a measurement accuracy of ±0.004 mm, which places it in the fine-precision sector for shop-floor and quality-control tasks where repeatable tolerances matter. With a resolution of 0.0001 mm on the readout, inspectors benefit from clearly legible increments that reduce reading uncertainty; this makes the device suitable for final checks and sampling routines on machined gears. Mechanical features such as the non-rotating spindle are intended to protect delicate workpiece surfaces and to maintain a consistent contact geometry during measurement, improving repeatability compared with rotating-spindle designs. Seamless data capture to speed inspection workflows Integration into digital quality systems is simplified by the Wireless + USB data output, enabling direct transfer of measurement values into SPC and inspection software without manual transcription. The instrument’s 2.4" colour touchscreen provides an intuitive interface for setting zero points and for quick retrieval of recent readings, reducing cycle time at the measuring station. Where traceability is required, automatic data transfer eliminates transcription errors and supports documentation of measurement sequences, which is particularly useful in production runs and incoming inspection. Certified calibration for traceable results This measuring instrument is delivered fully calibrated to ISO 17025, and a corresponding calibration certificate is supplied with the device. The accredited calibration ensures results are traceable to national standards and supports conformity assessments and audit requirements. For laboratories and quality departments that require documented proof of measurement capability, the ISO 17025 certificate included with the delivery provides immediate evidential value and reduces the administrative effort associated with initial qualification. Robust design for repeatable handling in production Built as a digital micrometer for industrial use, the unit combines a compact form factor with tactile controls and a protected display for workshop conditions. The non-rotating spindle reduces wear and the risk of surface marking on sensitive teeth profiles; the design therefore supports repeated checks on gears without introducing measurement artefacts. Note that the anvil with ball is not included, which allows users to fit the anvil geometry best suited to specific tooth-profile inspections or to use custom contact tips where required. Contact Metav Werkzeuge today for tailored advice on integrating the Microtech Metrology digital micrometer into existing QC processes; Metav’s Emmerich team is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss technical data and delivery options Technical data Article number: 110740758 GTIN: 4061905457111 ECLASS: 21170328 Core measurements Measurement range: 50–75 mm Display resolution: 0.0001 mm Accuracy: ±0.004 mm Display: 2.4" colour touchscreen Design and features Data output: Wireless + USB Digital instrument (colour touch display) Non-rotating spindle ISO 17025 calibration and certificate included Anvil with ball not included FAQ What measurement range does the micrometer cover? The digital micrometer covers a measurement range of 50–75 mm, suitable for gear profiles and medium-sized components. How precise are the readings from this instrument? Readings are provided with a resolution of 0.0001 mm and an accuracy of ±0.004 mm for reliable inspection results. Is the device ready for use straight away with documented calibration? Yes — the micrometer is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceability. How can measurement data be exported from the instrument? Measurement values can be transferred via the built‑in Wireless interface or through the USB port for integration with SPC and inspection software. Does the delivery include specialised anvils for gear teeth? The anvil with ball is not included, allowing the user to select or fit the most appropriate contact tip for specific gear inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Digital Micrometer With 2mm Small Tip Anvils, Friction Thimble, IP65, ISO 17025 Cal Certificate - Microtech Metrology
Combining sub‑micron readability and industrial protection, this micrometer delivers repeatable results for inspection and production. Its ISO 17025 calibration and robust IP65 aluminium housing support trustworthy traceability on the shop floor. Order the micrometer directly via Metav Werkzeuge or ask our consultants for application advice. Micrometer (digital) 50–75 mm — small‑tip Ø2 mm, IP65 (Microtech Metrology) The Micrometer (digital) is a compact precision instrument for measuring narrow bores and small features within a 50–75 mm range, built for workshop use and calibrated traceability. IP65 aluminium housing ISO 17025 calibration certificate included Small Ø2 mm measuring tips Resolution 0.001 mm with friction ratchet Reliable traceability and inspection-grade accuracy With a display resolution of 0.001 mm and an accuracy of ±0.005 mm, this digital micrometer provides measurement certainty for quality control and production sampling. The delivery includes an ISO 17025 calibration certificate, ensuring that results are traceable and accepted in regulated workflows. The combination of high resolution and laboratory‑grade calibration reduces rework by providing immediate, verifiable readings that integrate confidently into inspection documentation. Robust design for demanding workshop environments The instrument’s IP65‑rated aluminium housing protects sensitive electronics from coolant, chips and dust, allowing reliable use at the machine bench. A friction thimble with ratchet ensures consistent contact force, so repeatability does not depend on the operator’s touch. The small Ø2 mm tips are ideal for reaching into narrow grooves or thin ribs where conventional anvils cannot access, making the tool suitable for component finishing and assembly checks within its 50–75 mm measuring span. Digital functions that speed up routine measurement A clear digital display with ON/ABS, SET, HOLD and mm/inch switching reduces transcription errors and accelerates inspection cycles. The rotating spindle and dedicated hold function make it easier to capture readings in awkward positions, while origin and absolute modes support quick zeroing and comparative checks. These features help integrate the micrometer into standard operating procedures, shortening inspection times while maintaining consistent data quality. Contact Metav Werkzeuge for a technical consultation or to reserve this Microtech Metrology digital micrometer (SKU 110650751) with ISO 17025 calibration and IP65 protection Technical Data SKU: 110650751 GTIN: 4061905040481 Manufacturer: Microtech Metrology Measurements Measuring range: 50–75 mm Resolution (display): 0.001 mm Accuracy: ±0.005 mm Special features IP65 aluminium housing Small Ø2 mm measuring tips Friction thimble with ratchet Rotating measuring spindle Digital display with ON/ABS, SET, HOLD, mm/inch ISO 17025 calibration certificate included FAQ Is the micrometer delivered calibrated? Yes. The Microtech Metrology digital micrometer is supplied with an ISO 17025 calibration certificate, ensuring traceable measurements for inspection and documentation. What protection does the housing provide? The aluminium housing is rated IP65, protecting the electronics against dust ingress and water jets, suitable for the workshop environment. Can the micrometer measure in both metric and imperial units? Yes. The instrument includes a digital mm/inch function for fast switching between measurement units. Are the measuring tips suitable for narrow bores? The small Ø2 mm tips are designed for access into narrow features and grooves, improving reach where standard anvils are too large. Which model or SKU should be ordered for this specification? Order SKU 110650751 for the Microtech Metrology digital micrometer with 50–75 mm range, IP65 housing and ISO 17025 calibration. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Digital Micrometer With 2mm Small Tips, Colour Touchscreen, Wireless/USB, IP65, ISO17025 Cal Cert - Microtech Metrology
Combine ISO 17025-traceable calibration, wireless data transfer, and IP65 protection for dependable workshop performance; order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Microtech DataMet small-tip micrometer — 50–75 mm, Wireless and ISO 17025-calibrated The Microtech DataMet small-tip micrometer is a precision electronic micrometer designed for external diameter measurement of small components in industrial and laboratory environments. Wireless and USB data output ISO 17025 calibration certificate included Colour 2.4" touchscreen display IP65 protection for harsh environments Precision designed for micro components This micrometer is engineered for micro-range measurement with a 50–75 mm span, making it ideal where compact accuracy matters. With a specified accuracy of 0.004 mm, the instrument provides repeatable results for small shafts, pins and turned parts. The small Ø2 mm measuring faces concentrate contact area to reduce measurement uncertainty on fine features; a rotating spindle and integrated ratchet stop ensure consistent measuring force for reproducible readings. Industry 4.0-ready data and traceable records Built for connected workflows, the device offers Wireless and USB data output plus multiple HID and app modes for straightforward data capture. The onboard memory stores 2000 values with folder organisation and basic statistics, simplifying batch documentation. Optional MODBUS RTU (RS-485) is available for integration into automated systems, and the unit supports synchronous measurement modes and linear/temperature correction for reliable process control. Robust construction for everyday workshop use The housing is CNC-machined aluminium, providing a stable chassis that resists deformation in routine handling. An IP65 rating protects electronics from dust and splash exposure in production environments. The user interface combines a 2.4" colour touchscreen with a tactile ratchet stop and rotating spindle for ergonomic operation; these features reduce operator variability and help maintain measurement quality under frequent use. Certified calibration and quality assurance Delivered with an ISO 17025 calibration certificate (Ilac MRA), the micrometer arrives ready for inclusion in calibration chains and quality documentation. This traceable certification supports audit requirements and reduces setup time for quality control procedures. The combination of digital measurement, calibrated accuracy and industrial protection makes the instrument a practical choice for laboratories and production metrology alike. Contact Metav Werkzeuge to discuss ISO 17025-certified options and data-interface configurations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 110650758 GTIN: 4061905040528 Manufacturer: Microtech Metrology Facts Measuring range: 50–75 mm Accuracy: 0.004 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Protection class: IP 65 Memory: 2000 values Special features CNC-machined aluminium housing Small Ø2 mm measuring faces Ratchet stop (friction ratchet) Rotating spindle Optional MODBUS RTU (RS-485) Calibration certificate: ISO 17025 (Ilac MRA) FAQ What measurement range does this micrometer cover? The micrometer covers a measuring range of 50–75 mm, suitable for micro-range external diameter measurements. Is the micrometer delivered calibrated? Yes. The micrometer is supplied with an ISO 17025 calibration certificate, ensuring traceability and suitability for quality assurance workflows. How can measurement data be exported? Measurement data can be transferred wirelessly or via USB; the unit supports HID modes, a dedicated app connection and optional MODBUS RTU for industrial systems. Are the electronics protected for shop-floor use? The device has IP65 protection and a robust aluminium housing, offering resistance to dust and splashes commonly encountered in production environments. Can the micrometer store measurement series on the instrument? Yes. The built-in memory manager stores 2000 values with folder organisation and basic statistical functions for batch documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Digital Micrometer With Ball Anvils, ISO17025 Calibrated, IP65 Wireless USB - Microtech Metrology
Take advantage of high-precision measurement, robust industrial connectivity and a certified calibration for reliable quality control. Combine the ISO 17025 calibration certificate, wireless data transfer and IP65 aluminium housing to streamline inspection tasks. Order the digital micrometer directly via Metav Werkzeuge or consult our specialists for integration advice. Microtech digital micrometer with ball anvil — IP65, colour touchscreen The digital micrometer is a compact, industry-ready measuring instrument for precise external measurements in workshop and production environments. Colour 2.4" touchscreen display Wireless and USB data transfer ISO 17025 calibration certificate included IP65 CNC-machined aluminium housing Precision and traceability that support production decisions The instrument delivers a measured accuracy of 0.0025 mm and a readout resolution of 0.0001 mm, providing the repeatability required for tight tolerance work. Classified in the micro measuring range (10–100 mm), this micrometer is optimised for fine mechanical tasks and small components where stiffness and short anvils reduce measurement error. The included ISO 17025 calibration certificate ensures traceable results and simplifies quality documentation for audits or incoming inspection protocols. Seamless data flow for modern shop-floor workflows Equipped with multiple transfer modes — wireless to the MDS app, Wireless HID, Wireless HID+Mac and USB HID — the device supports rapid data capture and integration into measurement logs or SPC systems. An optional MODBUS RTU (RS‑485) interface enables direct connection to industrial control networks where required. The internal memory holds 2,000 values with folder and statistics functions, allowing batch collection without immediate host connection. These features reduce transcription errors and accelerate process decisions, making the instrument a practical choice for production lines and metrology benches. Durable construction and clear operation under real conditions A CNC-machined solid aluminium housing and IP65 protection guard electronics against coolant spray and dust common in workshops. The 2.4" colour touchscreen provides intuitive menus for modes such as Go/NoGo, Max/Min, linear and temperature correction, while the spherical R5 mm anvil supports secure contact on curved and finished parts. Together, these elements deliver a robust measuring station that remains usable across shifts and in harsher environments, lowering downtime and protecting measurement integrity. Practical measurement functions that reduce uncertainty On-board features such as online graphics, 2D graph mode, probe compensation and temperature correction address common sources of measurement variation. A memory manager with folder organisation and data transfer options enables systematic documentation and long-term traceability. These functions reduce rework and help to identify process trends, delivering a clear cost–benefit through fewer rejects and faster root-cause analysis. Contact Metav Werkzeuge today to discuss the Microtech digital micrometer (SKU 110360758) with ISO 17025 calibration and industrial wireless connectivity, and find the optimal configuration for production or lab use Technical Data Article number: 110360758 GTIN: 4061905457159 Manufacturer: Microtech Metrology Digital display: Colour 2.4" touchscreen Protection class: IP 65 Calibration certificate included: ISO 17025 (Ilac MRA) Facts Measuring range: 50–75 mm Resolution: 0.0001 mm Accuracy: 0.0025 mm Memory capacity: 2,000 values Special features Housing: CNC-machined aluminium block Anvil type: Sphere R 5 mm Data transfer: Wireless to MDS app, Wireless HID, Wireless HID+Mac, USB HID Optional output: MODBUS RTU (RS-485) On-board modes: Go/NoGo, Max/Min, Formula, Timer, Linear and temperature correction Measuring hub: Wireless instrument connection, 2D mode, probe compensation Memory manager: Folder system and statistics mode FAQ What measuring range does this micrometer cover? The instrument covers a measuring range from 50 to 75 mm, placing it in the micro class for fine mechanical work. Is the micrometer supplied with a calibration certificate? Yes. The micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA), ensuring traceability for quality systems. How can measurement data be exported from the device? Data can be transferred wirelessly to the MDS app (Windows, Android, iOS, macOS), via Wireless HID, Wireless HID+Mac or by USB HID. An optional MODBUS RTU (RS‑485) output is available for industrial networks. What level of accuracy and resolution does the instrument provide? The instrument offers an accuracy of 0.0025 mm with a display resolution of 0.0001 mm, suitable for demanding inspection tasks. Is the device suitable for a harsh workshop environment? Yes. With an IP65 rating and a CNC-machined aluminium housing, the instrument withstands dust and spray commonly found in production areas. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Digital Micrometer With Non-Rotating Spindle 0.001mm Resolution, Supplied With Seven Exchangeable Anvils, Plastic Case - Metav IndustryLine
Take advantage of the combination of ultra-fine 0.001 mm resolution, a non-rotating measuring spindle and seven interchangeable measuring inserts for versatile, reproducible micrometrology; delivered in a transport case for secure handling. Order directly via Metav Werkzeuge or consult the Metav team for specification advice. Digital Uni Micrometer M302.042.D – 50–75 mm range, 0.001 mm resolution (Metav IndustryLine) The Digital Uni Micrometer M302.042.D is a precision workshop micrometer designed for reliable external measurements in mechanical and toolmaking applications, featuring a non-rotating spindle and a set of special interchangeable measuring inserts. High-precision 0.001 mm readout Non-rotating measuring spindle Seven special measuring inserts included Delivered in transport case Precision that improves process reliability This digital micrometer places emphasis on repeatable accuracy and measurable performance. With a measuring range of 50–75 mm and a display resolution of 0.001 mm, the instrument reduces reading uncertainty compared with coarser tools; the declared accuracy of 0.01 mm provides a clear reference for quality control. The micrometer’s non-rotating spindle minimises surface damage and operator-induced eccentricity during contact, helping to maintain part integrity and reduce rework rates. These measurable characteristics support lean inspection routines and faster go/no-go decisions on the shop floor. Versatile contact geometry and ergonomic handling Interchangeable contact faces make this micrometer adaptable across a variety of diameters and profiles; the delivery includes seven pairs of special measuring inserts, enabling precise engagement with small radii, flats and uneven surfaces. A built-in ratchet ensures consistent measuring force, which together with the spindle design promotes stable readings across repeated measurements. The instrument’s frame is painted while the measuring drum is matt-chromed, combining durable protection with a low-reflectance finish that helps reading comfort during extended inspection tasks. Digital output and practical workshop readiness Integrated electronics provide a clear numeric readout with ON/OFF, ABS/INC, UNIT and SET functions for straightforward operation. Where data transfer is required, the micrometer supports RB 4.1 output, allowing recording in digital quality-control workflows or connection to data capture devices. For secure storage and transport, the tool is supplied in a protective case, keeping both the micrometer and the interchangeable inserts organised and protected between uses. Classified as a Standard range instrument, it matches the typical requirements of general mechanical and metalworking workshops for both bench and in‑process checks. Contact Metav Werkzeuge today for tailored advice on integrating this Metav IndustryLine micrometer into inspection routines, or to arrange prompt delivery from our Emmerich warehousing hub. Technical Data Article number: M302.042.D GTIN: 4054469114156 Brand: Metav IndustryLine Label: Digital Uni-Mikrometer +7 Einsätze, 50-75mm Messspindel nicht drehend, Abl. 0,001 Norm: Werksnorm Facts Measuring range: 50–75 mm Resolution (readout): 0.001 mm Accuracy: 0.01 mm Measuring spindle diameter: 6.5 mm Weight: 0.9 kg Tariff number: 90173000 Special features Material: frame painted, measuring drum matt chrome Measuring spindle: non-rotating Ratchet for constant measuring force Digital display with ON/OFF, ABS/INC, UNIT, SET functions Data output: RB 4.1 Includes seven pairs of special measuring inserts Delivered in a transport case FAQ What measuring range does this micrometer cover? This micrometer covers the 50–75 mm range, classified as a Standard range instrument suitable for general mechanical and metalworking inspections. Is the spindle rotatable and what are the benefits of the spindle design? The spindle is non-rotating; the non-rotating spindle reduces surface marking and helps achieve more consistent contact geometry during measurement with the Digital Uni Micrometer M302.042.D. Are additional measuring faces provided? Yes; the tool is supplied with seven pairs of special measuring inserts to accommodate different profiles and improve adaptability for diverse parts. Can measurement data be exported digitally? The micrometer supports RB 4.1 data output for integration with data-capture systems or quality-control software. Does the instrument include a protective case? The micrometer is delivered in a transport case to protect the instrument and inserts during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75mm Digital Micrometer With Pointed Measuring Faces, IP65, ISO17025 Calibration - Microtech Metrology
Combine ISO 17025 traceable calibration, 0.004 mm measurement accuracy and seamless wireless data transfer for reliable, networked quality control; order directly via Metav Werkzeuge or consult our specialists for application advice. Micrometer 110450758 – Digital micrometer with pointed measuring faces, 50–75 mm, Microtech Metrology The micrometer is a precision digital measuring instrument designed for fine mechanical work and workshop quality control, offering traceable calibration and Industry 4.0 data connectivity. ISO 17025 calibration included 50–75 mm micro measuring range 2.4" colour touchscreen display Wireless and USB HID data output Precision and traceability for critical measurements The instrument delivers traceable measurement results thanks to the supplied ISO 17025 calibration certificate, making it suitable for documented quality procedures. With a stated accuracy of 0.004 mm and a resolution of 0.0001 mm, the device reduces measurement uncertainty for repeatable checks. The built-in measuring spindle with a friction ratchet ensures consistent contact force, which stabilises readings and helps to meet industrial tolerances without repeated rechecking. Seamless data workflows and Industry 4.0 readiness Integration into modern data workflows is enabled by the unit's Wireless connectivity and USB HID compatibility, alongside four transfer modes that include wireless transfer to dedicated apps and USB HID operation. The MICS system supports on-line graphics, formula functions and temperature correction, while the memory manager holds 2,000 values for batch traceability. An optional Modbus RTU output allows direct connection to industrial controllers for automated logging and SPC (statistical process control) systems. Rugged handling and ergonomic design for daily use Designed for the workshop, the measuring head sits in an IP65 protected body and a CNC-machined aluminium housing that resists coolant and dust ingress. The rotating spindle and friction ratchet provide repeatable feel and avoid over-tightening, while the instrument’s pointed measuring faces are intended for specialised contact points, such as narrow grooves or small-feature inspection. These design choices combine to lower downtime and extend service intervals in routine production environments. Small-range specialist for fine mechanical work Classified within the micro range (50–75 mm), this device is optimised for precision tasks where compact dimensions and fine control matter most. Typical uses include measurement of micromechanical components, small fittings and accurate inspection of machined features where larger instruments would be unwieldy. The touchscreen and data management functions make it suitable both for bench checking and for integration into a metrology station that supports documented quality workflows. For networked precision and traceable results choose Microtech Metrology’s digital micrometer—contact Metav Werkzeuge in Emmerich for tailored advice, availability and fast delivery via +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 110450758 GTIN: 4061905040825 Manufacturer: Microtech Metrology IP protection: IP 65 Calibration: ISO 17025 certificate included Facts Measuring range: 50–75 mm Resolution: 0.0001 mm Accuracy: 0.004 mm Display: 2.4" colour touchscreen Memory capacity: 2,000 values Data transfer modes: 4 (wireless to app, wireless HID, wireless HID+MAC, USB HID) Special features CNC-machined aluminium housing Pointed measuring faces Friction ratchet for consistent contact force Rotating measuring spindle Wireless MICROTECH instrument connection and synchronisation MICS system: on-line graphic, formula, temperature correction, max/min Optional Modbus RTU (RS-485) for industrial connections Industry 4.0 ready with 2D mode, probe mode and statistics manager FAQ What measuring range does the micrometer cover? The micrometer covers a measuring range of 50–75 mm and is classified in the micro range for fine mechanical measurements. Is the device supplied with a calibration certificate? Yes, the micrometer is delivered fully calibrated with an ISO 17025 certificate (Ilac MRA) for traceable quality documentation. How can measurement data be transferred from the instrument? Data transfer options include Wireless to the MDS app, Wireless HID, Wireless HID+MAC and USB HID; an optional Modbus RTU interface is available for industrial systems. The internal memory stores 2,000 values. Is the instrument suitable for workshop use? Yes, the micrometer features IP65 protection and a robust CNC-machined aluminium housing, designed to withstand typical workshop conditions. Which applications is this micrometer suited for? Typical applications are fine mechanical work, precision component inspection and quality control tasks where compact size and traceable results are required; the pointed measuring faces aid in measuring small or recessed features. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Digital Micrometer With Pointed Tips, IP65, ISO 17025 Calibration Certificate - Microtech Metrology
Combine IP65 protection, ±0.005 mm accuracy and an included ISO 17025 calibration certificate to ensure reliable shop-floor traceability and repeatable measurements under industrial conditions. Order the CertiMet POINT micrometer directly via Metav Werkzeuge or ask our consultants if needed. CertiMet POINT digital micrometer 50–75 mm (IP65) by Microtech Metrology The CertiMet POINT digital micrometer is a rugged, IP65-rated measuring instrument for precise dimensional checks and quality control on the shop floor, covering a measuring range from 50 to 75 mm. IP65 aluminium housing, workshop-proof 0.005 mm accuracy for precise control Friction thimble ensures repeatable force Digital mm/inch readout with hold function Precision performance that supports reproducible quality control The micrometer delivers an accuracy of ±0.005 mm with a fine display resolution of 0.001 mm, providing measurable improvement in first-pass yield for typical production inspections. The combination of a high-resolution digital readout and a controlled measuring mechanism reduces operator variation and shortens inspection cycles. The included ISO 17025 calibration certificate guarantees traceability and simplifies documentation for internal audits or customer reporting, which is particularly useful where measurement records or calibration status must be proven. Robust design made for everyday workshop use Engineered with an aluminium housing and an IP65 rating, this instrument withstands dust and splash exposure common on the shop floor while remaining lightweight for handheld use. The friction thimble provides a repeatable measuring force and, together with the rotating spindle, enables precise approach and fine adjustment on small diameters or stepped features. The pointed measuring faces are suited to spot-contact checks and narrow grooves, making the tool practical for component edges, shafts and specialised fixtures where flat anvils would not reach. Practical features that speed measurement tasks A clear digital display with mm/inch, ON/ABS, SET and HOLD functions streamlines changeovers between imperial and metric documentation and allows values to be frozen for transfer to records. The device’s shop-orientated controls reduce handling time during repetitive checks and support efficient inline sampling. With its 50–75 mm range the instrument occupies a mid-range position well suited to common mechanical parts, balancing reach and stiffness so measurements remain reproducible across typical batch components. Traceability and workplace integration for production environments Delivered with an ISO 17025 calibration certificate (Ilac MRA), this micrometer integrates directly into quality systems that demand accredited measurement evidence. The robust protection class, the repeatable measuring force and the high resolution make the instrument suitable for final inspection, incoming goods checks and machine setup verification. For workshops that require documented traceability and repeatable measurement routines, the combination of durability and accredited calibration reduces rework and supports consistent product quality. Contact Metav Werkzeuge in Emmerich to align the CertiMet POINT micrometer with production requirements and obtain the ISO 17025-calibrated instrument complete with documentation and traceability Technical Data Article number: 110450751 GTIN: 4061905040788 Manufacturer: Microtech Metrology SKU: 110450751 Facts Measuring range: 50–75 mm Resolution (display): 0.001 mm Accuracy: ±0.005 mm Protection class: IP65 Special features Digital display with ON/ABS, SET, HOLD and mm/inch functions Friction thimble for repeatable measuring force Rotating measuring spindle for fine adjustment Pointed measuring faces Aluminium housing Calibration certificate to ISO 17025 (Ilac MRA) FAQ Is the instrument supplied calibrated? The CertiMet POINT digital micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA) and documented traceability. What accuracy and display resolution can be expected? The instrument provides an accuracy of ±0.005 mm and a display resolution of 0.001 mm for fine incremental readings. Is the micrometer suitable for use on the shop floor? Yes, the IP65-rated aluminium housing and friction thimble make the micrometer robust for typical workshop and production environments. Can the reading be switched between millimetres and inches? Yes, the digital readout includes an mm/inch function together with ON/ABS, SET and HOLD controls to support unit switching and value freezing. What applications suit the pointed measuring faces? The pointed measuring faces are intended for spot contact in narrow grooves, small-diameter features and applications where flat anvils cannot access the feature. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Digital Micrometer With Ratchet, Matt Chrome Measuring Drum, IP65, Plastic Case - Metav IndustryLine
Combine high-resolution readout, IP65 protection and a ratchet stop for consistent, production-ready measurements — order the digital micrometer M302.276 directly via Metav Werkzeuge or consult our specialists for application-specific advice. Digital micrometer M302.276 — 50–75 mm range, IP65 protection The Digital micrometer M302.276 is a robust outside micrometer designed for precise workshop and production measurement of components within the 50–75 mm range. Digital display with ABS/INC/SET/UNIT IP65 protection for workshop use Ratchet stop for consistent measuring force Satin‑chromed measuring drum finish Precise readout and dependable measurement for production environments The instrument provides a resolution of 0.001 mm, offering micrometre-level readout suitable for tasks that demand fine control and repeatability. The sealed electronics meet IP65 protection, which reduces downtime from coolant or dust exposure and supports stable operation in typical metalworking environments. Built to DIN 863, the gauge combines a clear digital interface with a mechanical design that keeps readings consistent, meaning fewer checks and faster throughput on the shop floor. Durable construction that keeps calibration stable The frame is lacquered and the measuring drum is satin‑chromed, giving corrosion resistance and a surface that withstands frequent handling. The measuring faces are hardened, which preserves accuracy over long service intervals and reduces wear-related drift. A ratchet stop ensures a constant measuring force, eliminating variation caused by operator pressure and improving reproducibility for batch controls and incoming inspection tasks. User-friendly digital functions to streamline measurement tasks The display module includes ON/OFF, ABS/INC, SET and UNIT functions for quick toggling between absolute and incremental modes and for unit selection. The large, high-contrast readout simplifies routine checks, while the fine resolution supports detailed adjustment work. The combination of tactile ratchet control and intuitive digital functions reduces measurement time and decreases the chance of operator errors in repetitive operations. Ideal applications and who benefits most This micrometer suits mechanical workshops, toolrooms and quality departments where robust, repeatable external measurements are required. The device is particularly well matched to component inspection, fixture set-up and final QC of turned or milled parts. Lightweight handling at 0.5 kg helps with ease of use during repetitive cycles, while the protective rating and hardened faces extend service life under regular industrial use. Contact Metav Werkzeuge in Emmerich for expert guidance on the Metav IndustryLine digital micrometer M302.276 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M302.276 GTIN: 4054469115559 Weight: 0.5 kg Measuring range: 50–75 mm Resolution (readout): 0.001 mm Protection rating: IP65 Facts Measuring faces diameter: 6.5 mm Standard: DIN 863 Measuring range min: 50 mm Measuring range max: 75 mm Special features Digital display with ON/OFF, ABS/INC, SET and UNIT buttons Ratchet measuring stop for constant force Frame lacquered and measuring drum matt‑chromed Hardened measuring faces FAQ What readout resolution does the micrometer provide? The Metav IndustryLine digital micrometer M302.276 offers a resolution of 0.001 mm for fine, micrometre-level measurements. Is the instrument protected against dust and coolant? Yes — the unit is rated IP65, protecting the electronics from dust ingress and low-pressure water jets typical in workshop environments. Are the measuring faces wear resistant? The measuring faces are hardened to resist wear, which helps maintain long-term accuracy and reduces the need for frequent recalibration. Does the micrometer include a ratchet stop? Yes, the tool features a ratchet measuring stop that enforces a consistent measuring force and improves repeatability across multiple measurements. Which standard does the gauge conform to? The device is manufactured to DIN 863, aligning with established metrological practices for outside micrometers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com