Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
50-75mm Digital Spherical-Face Micrometer Friction Thimble, 0.001mm Resolution, IP65, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of precision, robust protection and traceable calibration for reliable workshop inspection. Combining a digital micrometer with IP65 protection and an ISO 17025 calibration certificate guarantees measured values that integrate into quality systems with confidence — order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Micrometer (50–75 mm) — digital, IP65 protected by Microtech Metrology A micrometer designed for fine mechanical measurements and routine inspection tasks in precision workshops, offering a compact measurement range with robust protection and traceable calibration. IP65 aluminium housing ISO 17025 calibration certificate included Friction thimble for smooth setting Metric/inch readout with hold function Precision where fine details determine quality The instrument delivers a measured accuracy of 0.003 mm with a repeatable display resolution of 0.001 mm, making it suitable for demanding inspection tasks in small-component production. Its 50–75 mm measurement span places it in the micro-class of gauges, a range optimised for minimal deflection and secure handling when inspecting delicate parts such as small shafts, fittings and gauge blocks. The numerical specifications translate into consistent pass/fail decisions on the production line and reduce rework through clearer tolerances. Robust construction to maintain accuracy in real conditions An aluminium housing combined with IP65 ingress protection protects the mechanism from chips and splash water, extending service intervals in busy shop environments. The mechanical action is refined by a friction thimble, which provides a controlled feel during final approach and reduces the risk of over‑torque. These design choices preserve the instrument’s calibration state and ensure repeatable readings across shifts, supporting stable quality control without frequent interventions. Digital features that accelerate inspection routines Built-in functions for mm/inch, origin setting and a hold mode, together with dedicated buttons (0/MODE, SET, UNIT, HOLD), speed up repetitive measuring tasks and reduce transcription errors. The clear digital readout removes interpretation ambiguity common with analogue scales and supports quicker decision‑making in batch checks. The combination of straightforward controls and an accurate sensor delivers faster throughput for routine quality inspections while preserving measurement reliability. Traceable calibration to support quality documentation The micrometer is supplied with an ISO 17025 calibration certificate (Ilac MRA), enabling direct inclusion in accredited inspection records and easing compliance with internal and customer audits. Traceability to recognised standards reduces uncertainty in dimensional verification and offers documented proof of measurement capability when parts are released. For laboratories and production teams that require documented measurement assurance, the delivered calibration certificate is an essential quality artefact. For availability and tailored advice on applications or integration into inspection routines, contact Metav Werkzeuge in Emmerich; reference SKU 110360751 to speed up consultation and order handling Technical data Article number: 110360751 GTIN: 4061905459115 Manufacturer: Microtech Metrology IP rating: IP 65 Measurement range: 50–75 mm Digital: yes SKU: 110360751 Facts Resolution: 0.001 mm Accuracy: 0.003 mm Measurement range minimum: 50 mm Measurement range maximum: 75 mm Display increment: 0.001 mm Special features Double spherical measuring faces Friction thimble micrometer head Functions: mm/inch, origin, hold Aluminium housing Digital display with 0/MODE, SET, UNIT, HOLD buttons Supplied with ISO 17025 calibration certificate (Ilac MRA) FAQ Is the micrometer delivered calibrated? Yes. The micrometer from Microtech Metrology (SKU 110360751) is supplied with an ISO 17025 calibration certificate and can be entered into a traceable measurement system immediately. What is the effective measurement range and its classification? The instrument covers 50–75 mm and is classified in the micro range, optimised for fine mechanical parts and compact components. How precise are the readings during routine checks? Readings display an increment of 0.001 mm with an overall accuracy of 0.003 mm, suitable for high‑precision inspection and documented quality control. Can the display switch between metric and imperial units? Yes. The digital readout supports mm/inch selection via the UNIT button and includes an origin and hold function for workflow convenience. Is the instrument suitable for harsh shop environments? The aluminium housing with IP65 protection and the controlled friction thimble make it resilient to splash and debris, maintaining measurement stability in workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Digital Three-Point Internal Gauge Two Heads, IP65, Carbide Measuring Faces, Setting Ring, Supplied in Case - Metav IndustryLine
Take advantage of the combination of robust environmental protection, carbide measuring faces and a high-resolution digital display for consistent bore measurement results; order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Digital three-point internal micrometer M312.288.PN — IP65, carbide faces, two measuring heads The Digital three-point internal micrometer M312.288.PN is a precise instrument for internal diameter checks in workshop and inspection environments, covering the 50–75 mm range with a deep reach and rugged protection Three-point measuring mechanism for stable contact IP65 protection against dust and water Carbide measuring faces for long wear resistance Includes setting ring and 150 mm extension Precise results where repeatability matters The three-point mechanism provides a concentric contact that reduces measurement scatter compared with single-point probes; combined with a resolution of 0.001 mm and a stated accuracy of ±0.005 mm, the instrument delivers repeatable readings for quality control tasks. The solid measuring contact surfaces are carbide, resisting wear in daily shop use and preserving measurement integrity over longer service intervals. These technical properties support a rational decision: fewer rechecks, clearer pass/fail decisions and faster throughput on inspection benches. Built for workshop conditions and integration An IP65 rating shields the electronics from coolant splashes and airborne grit, allowing the gauge to be used at near-production positions without immediate risk. The built-in digital display offers ON/PRESET, mm/inch switching and HOLD functions for quick reading and documentation. For traceable data capture, the unit provides a RB 6 data output for connection to recording devices or gauge interfaces, enabling integration into existing measurement workflows and statistical process control routines. This combination of ruggedness and connectivity supports efficient, low-friction process control. Practical handling and application benefits Two interchangeable measuring heads extend the usable range across the 50–75 mm band while keeping the instrument compact and easy to manoeuvre; a measuring depth of 127 mm accommodates deeper bores and stepped features. The delivery includes a setting ring and a 150 mm extension, which simplify setup and allow calibration against a known reference. Supplied in a transport case, the instrument is protected in transit and ready to be stored safely between uses — a practical detail that reduces downtime and maintains instrument condition. Designed for typical workshop use and blind-hole measurement Constructed to DIN 863 standards, the gauge is suitable for frequent bench checks on machined components and, specifically, for reliable internal measurements including blind holes. The robust construction and carbide contacts make it appropriate for serial inspection in metalworking shops, toolrooms and fixture testing. For teams seeking dependable measurement data with minimal operator influence, this instrument offers a technically grounded solution that balances precision with everyday usability. For precise bore measurement solutions from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich for ordering and technical consultation: info@metav-werkzeuge.com • +49 2822 7131930 — Metav Werkzeuge will advise on configuration and delivery to the workshop. Technical data SKU: M312.288.PN GTIN: 4054469179292 eClass: 21170335 ETIM: EC003590 Facts Measuring range: 50–75 mm Measuring depth: 127 mm Resolution (reading): 0.001 mm Accuracy: ±0.005 mm Weight: 3.5 kg Extension: 150 mm Protection class: IP 65 Data output: RB 6 Special features Digital display with ON/PRESET, mm/inch and HOLD Two measuring heads for range coverage Carbide measuring faces Includes setting ring and extension Conforms to DIN 863 Suitable for blind-hole measurement Delivered in transport case FAQ What measuring range does the gauge cover and how is it delivered? The M312.288.PN covers 50–75 mm and is supplied with a setting ring, a 150 mm extension and a transport case for safe handling. How accurate is the measurement and what resolution can be expected? The instrument provides a reading resolution of 0.001 mm with a stated accuracy of ±0.005 mm, suitable for demanding workshop control tasks. Is the device suitable for use at machine benches where coolant and chips are present? Yes, the IP65 protection rating and robust construction make the gauge appropriate for near‑production inspection points and machine‑side checks. Can measurement data be output to external systems? The gauge offers a RB 6 data output for connection to data acquisition systems and external counters, facilitating documentation and statistical evaluation. What materials are used at the measuring contact faces? The measuring faces are carbide, chosen for wear resistance and consistent contact geometry during repetitive use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75mm Disc Anvil Micrometer Ø30mm Thimble Chrome Matt, Ratchet, Supplied in Case - Metav IndustryLine
Combine robust construction, a matt‑chromed measuring drum and a ratchet stop for consistent measuring force — ideal for precise, repeatable checks in the workshop. Order the instrument directly via Metav Werkzeuge or contact our consultants for tailored advice. M309.352 Disc Micrometre (50–75 mm) — 30 mm Measuring Disc, Ratchet Stop — Metav IndustryLine The M309.352 disc micrometre is a medium‑range measuring screw designed for reliable workshop and inspection use across a 50–75 mm span with a Ø 30 mm measuring disc. Robust painted frame 30 mm measuring disc for large contact area Ratchet stop for reproducible measuring force Accuracy 0.005 mm, resolution 0.01 mm Precision that supports quality control The instrument delivers a declared accuracy of 0.005 mm combined with a reading of 0.01 mm, which provides a measurable advantage for standard inspection tasks and fine workshop adjustments. Such specification reduces interpretation error during acceptance checks and supports traceable measurement routines. The clear analogue scale and matt‑finished drum aid visibility, while the stated precision assists in maintaining product tolerances and process stability. Repeatable measurements through controlled measuring force Equipped with a ratchet stop and a spindle that does not rotate, the micrometre is designed to minimise operator‑induced variation. The ratchet mechanism standardises contact pressure, avoiding over‑tightening, whereas the non‑rotating spindle prevents damage to delicate surfaces and eliminates torsional influences on the measured part. Together these features ensure higher repeatability in batch inspections and daily quality checks. Durable finishing for workshop environments A painted frame provides resistance to handling marks and corrosion, while the matt‑chrome measuring drum reduces reflection for easier reading. The Ø 30 mm disc offers a larger contact area than a pointed anvil, making it suitable for slightly uneven or softer surfaces where distribution of measuring pressure is beneficial. At around 0.8 kg, the tool balances solidity with handheld convenience, supporting both bench and portable inspection tasks. Where this measuring screw adds value The M309.352 is well suited to mechanical workshops, maintenance departments and small production lines that require reliable dimensional checks within the 50–75 mm range. Its combination of a wide measuring face and controlled spindle action helps when assessing components with shallow profiles or when avoiding surface marking is important. The analogue format keeps operation straightforward while delivering the precision expected in routine quality assurance. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M309.352 can be integrated into existing inspection workflows or to request specific delivery information from our Emmerich centre Technical data Article number: M309.352 GTIN: 4054469118796 Category: Messschrauben Type: analogue Key figures Measuring range: 50–75 mm Resolution (reading): 0.01 mm Accuracy: 0.005 mm Measuring disc diameter: Ø 30 mm Weight: 0.8 kg Materials & features Frame painted Measuring drum matt chrome‑plated Non‑rotating spindle Ratchet stop Analogue scale FAQ What measuring range does this micrometre cover? The M309.352 covers a measuring span of 50–75 mm, suitable for medium‑range dimensional checks. What accuracy and resolution can be expected? This analogue measuring screw offers an accuracy of 0.005 mm with a reading resolution of 0.01 mm. Why is the ratchet stop important? The ratchet stop ensures a reproducible measuring force; in the M309.352 it reduces operator variability and protects workpiece surfaces. What are the measuring faces like? The instrument features a Ø 30 mm measuring disc, giving a broad contact area that is advantageous on uneven or soft surfaces. Is the spindle rotating during measurement? No — the micrometre is equipped with a spindle that does not rotate, which helps prevent surface damage and improves repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75mm Groove Micrometer Gauging Frame 0.01mm Resolution Friction Ratchet, Plastic Case - Metav IndustryLine
Take advantage of the precise 0.01 mm graduation, ±0.006 mm accuracy and repeatable measurement force for reliable groove inspection; order the instrument directly from Metav Werkzeuge or consult the technical team for application advice. M307.023 Micrometer for Slot Measurement – 50–75 mm, 0.01 mm graduation (Metav IndustryLine) A compact micrometer for slot and groove measurement, intended for fine mechanical workshops and quality control tasks where short anvils and high repeatability are required. Graduation 0.01 mm Accuracy ±0.006 mm Ratchet stop for consistent force Non-rotating spindle for delicate surfaces Compact design that suits fine assemblies The instrument is tailored for narrow and hard-to-reach features: the measuring range 50–75 mm and the small measuring faces (0.75 x 6.5 mm) make it ideal for inspecting slots, grooves and slim components. Classified as Micro (max 10–100 mm), this format prioritises stiffness and minimal lever effect, which reduces bending and improves reproducibility on small parts. The compact frame supports steady handling in bench and inspection‑station environments, delivering technical advantages where larger gauges would be unwieldy. Mechanical features that improve measurement reliability Built-in mechanical aids elevate day‑to‑day consistency: the ratchet stop ensures a uniform measuring force across repeated checks, while the non-rotating spindle protects delicate surfaces from scraping and reduces operator‑induced variation. Together with the fine 0.01 mm graduation, these features lower the influence of human factors and support tighter process control. The indicated ±0.006 mm accuracy reflects the instrument’s suitability for shop‑floor quality assurance and precision components. Practical application, handling and maintenance Reading is performed on an analogue scale with a 0.01 mm division; users benefit from a direct, low‑maintenance display with immediate tactile feedback. The 0.5 mm spindle pitch provides predictable axial movement per revolution, simplifying coarse positioning during measurement. Typical uses include toolmaking, component inspection and small‑series checks where slot geometry matters. Routine care is limited to clean wiping and occasional lubrication of the spindle; calibration intervals should follow internal quality procedures or customer requirements to maintain traceability. Choose Metav IndustryLine's M307.023 for robust, repeatable slot measurement and contact Metav Werkzeuge for tailored advice and prompt delivery from Emmerich Technical data Article number: M307.023 GTIN: 4054469117287 eClass: 21170328 ETIM: EC003590 Tariff number: 90173000 Facts Measuring range: 50–75 mm Resolution / graduation: 0.01 mm Accuracy: ±0.006 mm Spindle pitch: 0.5 mm Measuring faces: 0.75 x 6.5 mm Reading type: Analog Features Ratchet stop Non-rotating spindle Designed for slot/groove measurement Classification: Micro (max 10–100 mm) Category: Micrometer screw gauges FAQ What is the exact measuring range of this micrometer? The measuring range is 50–75 mm for the M307.023 micrometer (Metav IndustryLine), suitable for narrow slots and grooves. How precise is the instrument for routine inspection? This micrometer offers a graduation of 0.01 mm and an indicated accuracy of ±0.006 mm, providing reliable repeatability for shop‑floor quality checks. Why is the non‑rotating spindle important? A non‑rotating spindle on the M307.023 prevents surface marking and reduces measurement error on delicate components during groove measurement. Is the ratchet stop beneficial for repeated measurements? Yes, the ratchet stop standardises measuring force, improving reproducibility across multiple checks with the Metav IndustryLine micrometer. Which applications are typical for this instrument? Common uses include toolmaking, component inspection, small‑series production and any task where concise groove or slot geometry must be verified. What maintenance does the micrometer require? Maintenance is minimal: keep measuring faces clean, protect the spindle from debris and apply light lubrication as recommended by standard workshop practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75mm Micrometer Depth Gauge With Colour Touchscreen, Wireless/USB, IP65 - Microtech Metrology
Take advantage of the combination of reliable ±0.004 mm measurement accuracy, robust IP65 protection and seamless Wireless+USB data transfer for precision tasks in the 50–75 mm range. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology digital micrometer (50–75 mm) — Colour 2.4" touchscreen & Wireless+USB The Microtech Metrology micrometer is a digital measuring instrument designed for precise workshop and laboratory measurements within the 50–75 mm range, combining a Colour 2.4" touchscreen with protected connectivity for modern data workflows. Colour 2.4" touchscreen display Wireless and USB data output IP65 dust and water protection High accuracy ±0.004 mm Repeatable precision for quality control and inspection The instrument delivers high repeatability with a declared accuracy of ±0.004 mm, making it suitable for routine quality control and dimensional verification in component production. The tight tolerance ensures that inspection results are directly comparable across shifts and measuring sessions, reducing rework and non‑conforming parts. Built-in digital readout avoids manual interpolation errors and speeds up measurement cycles, which supports lean production targets and consistent process control. Modern data handling to streamline documentation Equipped with Wireless+USB data output and a Colour 2.4" touchscreen, the device enables direct transfer of measured values into spreadsheets and SPC systems, eliminating transcription errors and saving administrative time. The clear colour display improves readability in variable lighting, while tactile screen controls simplify menu navigation for common functions. Integration capability with existing data capture workflows facilitates traceable batch documentation and faster reporting for inspection records. Robust design for everyday shopfloor use With a measuring range of 50–75 mm and hardened measuring faces of Ø12 mm, the micrometer is dimensioned for typical workshop components where a balance of reach and rigidity is required. The IP65 protection rating shields electronics from dust and splashes, extending service life in harsher production environments. Ergonomic construction and a concise footprint allow handheld operation for rapid checks at the machine or measuring bench, providing confidence that measured values reflect part geometry rather than handling artefacts. Choose Microtech Metrology’s digital micrometer for precise 0.004 mm measurement and reliable data transfer; contact Metav Werkzeuge in Emmerich for tailored supply and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 133800758 GTIN: 4061905458149 Manufacturer: Microtech Metrology Facts Measuring range: 50–75 mm Accuracy: ±0.004 mm Measuring faces: Ø12 mm Display: Colour 2.4" touchscreen Protection class: IP65 Special features Digital output: Wireless + USB Digital device (electronic readout) Category: Micrometers eClass: 21170328 FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 50–75 mm (Microtech Metrology, SKU 133800758), suitable for medium‑sized workshop components. How precise is the device for inspection tasks? Precision is specified as ±0.004 mm for the Microtech Metrology micrometer, making it appropriate for standard quality control and dimensional checks. Which data interfaces are available for logging measurements? Measurement data can be exported via Wireless and USB connections, allowing the micrometer to feed values directly into documentation or SPC systems. Is the micrometer protected against dust and splashes? Yes, the unit carries an IP65 rating, so the electronics and display are protected against dust ingress and water jets typical of workshop environments. What advantages does the touchscreen bring to daily measuring? The Colour 2.4" touchscreen provides improved legibility and intuitive controls, speeding routine measurements and reducing input errors on the Microtech Metrology micrometer. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Micrometer With 20mm Anvil Faces, Colour Touchscreen, Wireless/USB, IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise measurement, industrial protection and traceable calibration combined in one instrument; the micrometer's high resolution and ISO 17025 calibration support reproducible quality control. Order the micrometer directly via Metav Werkzeuge or ask the consultants for application support. Micrometer 50–75 mm — Digital, IP65, Wireless+USB (Microtech Metrology) The micrometer provides a 50–75 mm measuring range with a 1.5" colour touchscreen and industrial data output for production and laboratory use. 50–75 mm measuring range for medium parts Colour touchscreen 1.5" with 0.0001 mm resolution ISO 17025 calibration certificate included Wireless and USB data output, IP65 protected High-precision measurement for repeatable QC This measuring instrument delivers a declared accuracy ±0.004 mm and a fine resolution of 0.0001 mm, making it suitable for tasks where small deviations matter. The specified tolerance reflects the instrument’s capability to reproduce values consistently; in practice this means fewer rejects and a clearer statistical basis for process control. The 50–75 mm span covers medium components common in machining and assembly, offering a balance between reach and rigidity. The combination of tight accuracy and sub‑micrometre readout supports both routine shop‑floor checks and more demanding inspection tasks. Robust construction that withstands industrial conditions Designed for use beyond the bench, the instrument meets IP65 protection for dust ingress and protection against water jets, so measurement remains reliable in harsher environments. The measuring faces are disc anvil Ø20 mm, providing a stable contact area for cylindrical or slightly irregular surfaces, while the non-rotating spindle prevents workpiece chatter and improves repeatability. A built-in ratchet stop ensures uniform measuring force, reducing operator‑induced variation and helping to meet inspection tolerances with confidence. These features together mean less rework and a more dependable inspection routine. Modern data handling and certified traceability Equipped with Wireless and USB outputs and a 1.5" colour touchscreen, the instrument simplifies data transfer into inspection software and reduces transcription errors. The touchscreen gives immediate visual feedback while the digital outputs enable direct logging of values into SPC systems. Delivered with an ISO 17025 calibration certificate, the device arrives ready for documented measurements and traceable quality records; the calibration status removes ambiguity during audits and helps integrate the tool into accredited measurement processes. The brand's industrial interface choices facilitate faster reporting and smoother handovers between operators. Practical fit into workshop and lab workflows Because the unit couples compact dimensions with rugged features, it suits inspection benches, in‑process controls and small assembly cells where medium‑sized parts are common. The measured range and solid contact geometry cut the need for alternative gauges in many instances, streamlining inventory and saving handling time. The instrument’s design reduces operator training time: consistent measuring force and intuitive display lead to more uniform results across personnel. For customers seeking to increase throughput without compromising measurement quality, this solution provides a clear improvement in operational reliability. Contact Metav Werkzeuge for tailored advice on integrating Microtech Metrology micrometers with ISO 17025 calibration into existing inspection chains and to arrange delivery or technical consultation. Technical Data Article number: 110780758 GTIN: 4061905041372 Manufacturer: Microtech Metrology SKU: 110780758 Facts Measuring range: 50–75 mm Resolution: 0.0001 mm Declared accuracy: ±0.004 mm Touchscreen: Colour 1.5" Protection class: IP65 Special features Disc anvil Ø20 mm Non-rotating spindle Ratchet stop for constant measuring force Wireless and USB data output Delivered with ISO 17025 calibration certificate Colour touchscreen display FAQ What measurement range does the instrument cover? The instrument covers a 50–75 mm range, suitable for medium components and many inspection tasks in machining and assembly. Is the device supplied with a calibration certificate? Yes, the micrometer is supplied fully calibrated with an ISO 17025 certificate, enabling traceable results for audit and quality‑assurance purposes. How are measurement values exported to inspection software? Measurement values can be exported via Wireless or USB, allowing direct integration with SPC and data‑logging systems. What does IP65 mean for everyday use? IP65 indicates dust ingress protection and resistance to low‑pressure water jets, so the instrument tolerates workshop conditions where splash and dust are present. How does the ratchet stop and non‑rotating spindle improve repeatability? The ratchet stop enforces a consistent contact force, while the non‑rotating spindle prevents spindle‑induced rotation of the workpiece—both reduce operator variability and increase measurement repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Micrometer With Fine Indicator 0.001mm Resolution, Hardened Steel Spindle, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 0.001 mm reading resolution, an industrial ±0.003 mm accuracy and hardened measuring faces for consistently reproducible results; order the M307.210 directly via Metav Werkzeuge or ask our consultants for application advice. M307.210 Micrometre with Fine Indicator — 50–75 mm, 0.001 mm resolution (Metav IndustryLine) The M307.210 micrometre is an analogue outside micrometre engineered for precise workshop and laboratory measurements in the compact 50–75 mm range. Fine 0.001 mm reading resolution Industrial ±0.003 mm accuracy Hardened measuring faces for longevity Matt‑chromed frame and measuring drum Precision that reduces rework The analogue design with a fine indicator delivers a clear 0.001 mm reading while the specified ±0.003 mm accuracy corresponds to a 3 µm error band, giving reliable tolerances for quality control and fine mechanical fitting. This level of resolution and repeatability reduces the need for rework and speeds up inspection loops by providing verifiable results that can be used directly for process decisions. The instrument is therefore suited to tasks where small dimensional deviations matter. Built to withstand workshop use A robust, matt‑chromed frame and measuring drum combine corrosion resistance with a tactile, non‑reflective finish that helps in varied lighting conditions. The hardened measuring faces preserve measuring geometry under frequent contact and resist premature wear, so reference dimensions remain stable over time. A 6.5 mm spindle diameter contributes to stiffness at the measuring point, improving repeatability during routine checks and bench work. Supplied protection for transport ensures the instrument arrives ready for use. Simple handling and clear readout for compact ranges Covering the 50–75 mm span, this instrument occupies the compact range commonly required for fine mechanical and bench‑level measurements; the size keeps the micrometre easy to handle while still offering sufficient reach for small assemblies. The analogue fine indicator favours technicians who prefer direct mechanical readout without batteries or electronic interfaces, making the device low‑maintenance and immediately available for production or laboratory environments. The combination of compact form and high resolution supports efficient inspection workflows. For precision that fits a compact workshop, contact Metav Werkzeuge in Emmerich to discuss the M307.210 micrometre and arrange supply directly from our European quality filter Technical data Article number: M307.210 GTIN: 4054469117478 Eclass: 21170328 ETIM: EC003590 Numbers / core technical data Measuring range: 50–75 mm Resolution: 0.001 mm Accuracy: ±0.003 mm Spindle diameter: 6.5 mm Designs / special features Matt‑chromed frame and measuring drum Hardened measuring faces Analogue micrometre with fine indicator Supplied in a protective case for transport Category: Outside micrometre (measuring screw) FAQ How precise is the M307.210 micrometre? The M307.210 provides a resolution of 0.001 mm with an accuracy of ±0.003 mm, suitable for fine inspection and quality tasks. Is this micrometre suitable for fine mechanical work? Yes — the compact 50–75 mm range and high resolution make the instrument ideal for fine mechanical assemblies and toolroom checks. Are the measuring faces resistant to wear? The measuring faces are hardened, which protects geometry and maintains repeatability under frequent use. Is the instrument supplied ready for transport and storage? The micrometre is supplied in a protective case suitable for transport, so it reaches the workshop ready for immediate use. What routine maintenance is recommended? Keep measuring faces clean and dry, store the instrument in its protective case when not in use, and apply light spindle lubrication periodically to preserve smooth, repeatable operation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-75mm Micrometer With Touchscreen Display, Wireless USB Output, IP65, ISO 17025 Calibration Certificate - Microtech Metrology
Benefit from precise shop‑floor measurement with wireless data transfer and an IP65 aluminium housing, plus an ISO 17025 calibration certificate for traceable results; order directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Digital Micrometer 50–75 mm — Wireless data, IP65 protection The Microtech Digital Micrometer 50–75 mm is a robust, digitally driven outside micrometer designed for shop‑floor and laboratory use, combining touchscreen operation with wireless and USB data transfer for efficient process integration. Digital micrometer 50–75 mm range Wireless and USB data output ISO 17025 calibration certificate included IP65 aluminium housing with touchscreen Accurate measurement that supports quality control The device delivers an accuracy of 0.004 mm, providing reliable dimensional control across its 50–75 mm measuring span. A fine 6.5 × 0.75 mm anvil profile keeps contact repeatable on small radii, while the colour 2.4" touchscreen simplifies parameter changes and read‑out. With an internal memory for 2,000 values and statistical logging, the instrument reduces transcription errors and supports consistent batch inspection, making it suitable for both production checks and final acceptance testing. Integrated data flow for Industry 4.0 workflows Equipped with a comprehensive MICS system and a DataMet BLADE architecture, the instrument offers wireless connection to the MICROTECH HUB and multiple data modes (Windows, Android, iOS, macOS), plus USB HID emulation. On‑board functions such as Go/NoGo, Max/Min, linear and temperature correction, and 2D graphing enable immediate process decisions and fast SPC feedback. An optional MODBUS RTU (RS‑485) port permits direct PLC integration for automated data capture and traceability. Built to withstand production environments The micrometer’s IP65‑rated, CNC‑machined aluminium housing resists coolant and dust ingress, while the sealed touchscreen and sealed electronics deliver durable everyday use. Delivered with a full ISO 17025 calibration certificate (Ilac MRA), the instrument arrives ready for traceable measurement routines and documentation in quality systems. The rugged design, together with wireless and USB outputs, streamlines measurement tasks and keeps throughput high even under demanding conditions. Select Microtech quality via Metav Werkzeuge for immediate integration into your measurement chain — contact Metav Werkzeuge in Emmerich for technical matching and procurement support Technical data Article number: 110660758 GTIN: 4061905457289 Manufacturer: Microtech Metrology Digital display: Colour 2.4" touchscreen Data output: Wireless + USB HID Protection class: IP65 Calibration: ISO 17025 certificate included Facts Measuring range: 50–75 mm Resolution (reading): 0.0001 mm Accuracy: ±0.004 mm Memory: 2,000 values Anvil size: 6.5 × 0.75 mm Special features Industry 4.0 DataMet BLADE with MICS system On‑line graphic, analog scale, 2D graphing Go/NoGo, Max/Min, Formula, Timer functions Linear and temperature compensation Wireless MICROTECH instrument synchronization 4 modes data transfer: Wireless to MDS app, Wireless HID, Wireless HID+MAC, USB HID Optional MODBUS RTU (RS‑485) output for industrial connections CNC‑machined solid aluminium housing Calibration certificate ISO 17025 (Ilac MRA) included FAQ What measurement range does the micrometer cover? The micrometer covers a measuring range of 50–75 mm, suitable for medium‑sized shop‑floor components. Is the instrument calibrated on delivery? Yes — the device is supplied with a full ISO 17025 calibration certificate, ensuring traceability and documented accuracy. How can measurement data be exported? Data can be exported wirelessly to the MICROTECH MDS app (Windows, Android, iOS, macOS), via Wireless HID, or over USB HID; an optional MODBUS RTU interface is available for PLC integration. Can this device be used in wet or dusty environments? The micrometer is IP65 rated and housed in a CNC‑machined aluminium body, making it suitable for typical shop‑floor conditions with splash and dust exposure. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Precision Micrometer 0.001mm Resolution, Ratchet, ISO 17025 Calibration Certificate - Microtech Metrology
Combine 1 µm resolution, ISO 17025 traceability and a ratchet-controlled measuring force to secure reproducible external measurements; this micrometer offers reliable results for workshop and laboratory use. Order directly via Metav Werkzeuge or contact our consultants for technical advice. Micrometer (50–75 mm) by Microtech Metrology – 1 µm resolution, ISO 17025 calibrated The micrometer is a precision external measuring instrument for workshop and laboratory use across the 50–75 mm range, designed for reproducible readings and quality assurance tasks 1 µm resolution for sub-micron checks ISO 17025 calibration certificate included Friction thimble and ratchet stop for repeatability Analogue design with ±0.003 mm accuracy Measurable certainty through certified calibration The combination of 1 µm resolution and a documented calibration workflow gives measurable certainty where tolerances matter. Supplied fully calibrated to ISO 17025, the instrument arrives with a traceable certificate that supports quality records and audit trails. This eliminates start‑up downtime for incoming inspection and accelerates integration into existing measurement routines, providing a verifiable baseline for process capability studies and corrective action documentation. Repeatable contact and ergonomics for operator consistency A friction thimble paired with a ratchet stop minimises variation from human force, so each exterior dimension is taken under a consistent measuring pressure. The analogue spindle and contact geometry—including an anvil diameter of Ø6.5 mm—are optimised for firm seating on shafts and rings, delivering a stated accuracy of ±0.003 mm. The mechanical design reduces rework by limiting operator-induced scatter, making the gauge a dependable tool for both spot checks and series inspections. Robust analogue design for everyday workshop use Built as an analogue external micrometer, this instrument balances precision with simplicity: it needs no batteries and requires minimal maintenance while remaining suitable for workshop and calibration-laboratory environments. The 50–75 mm measuring range covers a broad share of common components, keeping handling straightforward and measurement time low. Supplied with a ratchet and calibration certificate, the device is ready for immediate metrological use and systematic quality control. For traceable, high-precision external measurement choose the Microtech Metrology micrometer supplied and certified by Metav Werkzeuge—contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and technical consultation Technical data SKU: 110110750 GTIN: 4061905456787 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 50–75 mm Resolution: 0.001 mm Accuracy: ±0.003 mm Anvil diameter: Ø6.5 mm Special features Analogue reading, friction thimble Ratchet stop for constant measuring force Supplied with ISO 17025 calibration certificate Category: External micrometer FAQ How accurate is the micrometer in practice? The Microtech Metrology micrometer (SKU 110110750) provides a resolution of 0.001 mm and a stated accuracy of ±0.003 mm, suitable for demanding workshop and laboratory applications. Is the instrument ready for traceable measurement after delivery? Yes. The micrometer from Microtech Metrology is delivered fully calibrated with an ISO 17025 calibration certificate, enabling immediate traceability and audit-ready documentation. Which tasks is this micrometer best suited for? The micrometer covers external measurements of shafts, rings and similar components in the 50–75 mm range and is suitable for routine shop-floor checks as well as laboratory quality control work. How does the ratchet stop affect measurement results? The ratchet stop ensures a consistent measuring force; with the friction thimble it reduces operator-induced variation, improving repeatability for successive external measurements taken with the micrometer. Is this an analogue or digital instrument and can it be used in quality control? This is an analogue micrometer with a precision thimble and ratchet; supplied with ISO 17025 calibration, it is fully suitable for quality control procedures and documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Precision Micrometer Screw Gauge Digital 2.4" Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025‑calibrated traceability combined with 0.004 mm measurement accuracy and convenient Wireless + USB data transfer for reliable production control. The set of six interchangeable anvils simplifies thread checks across a wide pitch range. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Micrometer "Metric 60" by Microtech Metrology — 50–75 mm, Wireless + USB, 2.4" colour touchscreen The Micrometer "Metric 60" is a precision instrument for external and thread measurement, combining a compact 50–75 mm measuring range with touchscreen readout and wireless/USB connectivity for workshop and quality‑control use. *Wireless + USB data output for direct transfer *2.4" colour touchscreen for intuitive operation *High resolution: accuracy 0.004 mm *Delivered calibrated to ISO 17025 with certificate Traceable accuracy for process control The micrometer is supplied calibrated to ISO 17025 and includes a calibration certificate, ensuring measurements are directly traceable and suitable for documented quality processes. With a quoted accuracy of 0.004 mm and a readout resolution of 0.0001 mm, the instrument supports tight tolerances in series production and final inspection. This level of precision reduces rework and gives trustworthy measurement values that can be integrated into audit documentation. Fast digital capture and ergonomic handling Equipped with a 2.4" colour touchscreen and both Wireless and USB data outputs, the gauge enables rapid transfer of measurement results into inspection software or spreadsheets, eliminating manual transcription errors. The non‑rotating measuring spindle improves stability when assessing threads, while the compact control surface and responsive display make repetitive measuring tasks less fatiguing. Data export options permit seamless logging and traceability in a modern shop‑floor environment. Compact range tailored for fine work and thread measurement With a measuring range of 50–75 mm, the instrument belongs to the compact category suited to fine mechanical and small‑assembly tasks; its form factor supports access to confined geometries without sacrificing rigidity. The delivery includes six interchangeable anvils (0.4–7 mm) that expand functionality for thread and specialised external diameter checks. Robust construction and the selectable anvils permit consistent contact geometry for repeatable results. Integration into production workflows The device is engineered for straightforward incorporation into existing measurement routines: the Wireless + USB outputs serve both manual inspection stations and semi‑automated test benches, while the touchscreen allows quick toggling between units and functions. Supplied accessories reduce the need for additional tooling, and the ISO 17025 calibration ensures the instrument can be referenced directly in quality plans and inspection instructions. Contact Metav Werkzeuge in Emmerich to discuss how Microtech Metrology’s ISO 17025‑calibrated Micrometer "Metric 60" (SKU 110710758) can be specified for production control or incorporated into an existing inspection workflow. Technical Data Article number: 110710758 GTIN: 4061905456909 Manufacturer: Microtech Metrology Type: Metric 60 Digital display: Colour 2.4" touchscreen Data output: Wireless + USB Core specifications Measuring range: 50–75 mm Resolution: 0.0001 mm Accuracy: 0.004 mm Readout: Digital Measuring spindle: non‑rotating Special features Delivered calibrated to ISO 17025 with certificate Included accessories: 6x anvils 0.4–7 mm Suitable for external and thread measurement Compact form for fine mechanical work Wireless + USB data transfer for process integration FAQ What level of accuracy does the micrometer provide? The Micrometer "Metric 60" by Microtech Metrology offers an accuracy of 0.004 mm, with a resolution of 0.0001 mm, suitable for demanding workshop and QC tasks (SKU 110710758). Is the instrument delivered calibrated? Yes, the micrometer is supplied calibrated to ISO 17025 and includes a calibration certificate as part of the delivery. How are measurement results exported? Measurement data can be exported via Wireless connection or USB, enabling direct capture into inspection software or data logs from the Micrometer "Metric 60". Which measuring tasks is this instrument best for? The device is optimised for external diameter and thread measurement within the 50–75 mm range and benefits from the set of interchangeable anvils for varied thread pitches. What accessories are included with the micrometer? The delivery contains six anvils (0.4–7 mm) to support thread and specialised external measurements and to ensure consistent contact geometry. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Precision Micrometer With 35mm Measuring Faces, Touchscreen Output, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a fully calibrated instrument that combines laboratory-grade accuracy and secure data transfer: the micrometer delivers ±0.005 mm accuracy and Wireless + USB output for efficient quality control. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Microtech Metrology Digital Outside Micrometer 50–75 mm — ±0.005 mm accuracy, Wireless + USB The Microtech Metrology micrometer 50–75 mm is a wireless digital outside micrometer designed for precise dimensional checks in workshop and laboratory environments. Calibrated to ISO 17025 certificate included High accuracy ±0.005 mm Wireless + USB data output 35 mm flat measuring faces Reduce rejects with metrology-grade accuracy Industrial inspection benefits directly from a low measurement uncertainty: the instrument's ±0.005 mm specification reduces ambiguity in pass/fail decisions and shortens feedback loops in production. By limiting measurement scatter, the device supports higher first-pass yield and fewer corrective operations, which translates into tangible time savings on the shop floor. This level of precision is particularly valuable where tight tolerances determine assembly fit or functional performance. Capture measurements quickly and maintain traceability Equipped with Wireless + USB connectivity and a responsive Touchscreen 1.54", the micrometer streamlines data capture into quality-management systems and spreadsheets without manual transcription. Digital transfer reduces input errors and accelerates batch inspection routines, enabling operators to focus on measurement quality rather than paperwork. The touchscreen facilitates fast configuration and unit switching, improving throughput during repetitive inspection tasks. Robust contact design for consistent results The tool's 35 mm flat measuring faces and non-rotating spindle provide stable contact geometry ideal for axial and large-surface measurements across the 50–75 mm range. The broader anvils increase contact area, lowering the risk of local deformation on delicate parts and improving reproducibility. Built as a digital outside micrometer, the instrument balances ease of handling with the stiffness required for repeatable workshop use, making it suitable for incoming inspection and routine quality control. Delivered audit-ready with ISO 17025 calibration This instrument is supplied fully calibrated to ISO 17025, with a traceable calibration certificate included for immediate deployment in regulated environments. The declared conformity supports laboratory accreditation processes and internal audits, providing documented measurement uncertainty to satisfy quality managers and auditors. For operations that require documented metrological evidence, the calibration package ensures the device is ready for integration into formal measurement systems. Contact Metav Werkzeuge today to specify the right Microtech Metrology digital outside micrometer for your inspection needs, request the ISO 17025 calibration certificate, or receive tailored application advice by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 110780757 GTIN: 4061905457456 Manufacturer: Microtech Metrology Digital: yes Display: Touchscreen 1.54" Data output: Wireless + USB Measuring range: 50–75 mm Accuracy: ±0.005 mm Measuring faces: Teller Ø35 mm Spindle: non-rotating eClass: 21170328 ETIM: EC003590 ISO 17025: calibration certificate included Facts Measuring range min: 50 mm Measuring range max: 75 mm Display size: 1.54 inches Accuracy: ±0.005 mm GTIN: 4061905457456 Article number: 110780757 Special features Wireless + USB data transfer Touchscreen 1.54" Non-rotating spindle for stable contact Large flat measuring faces Ø35 mm Supplied calibrated to ISO 17025 Digital outside micrometer FAQ What measurement accuracy can be expected from this micrometer? The specified accuracy is ±0.005 mm; the Microtech Metrology digital outside micrometer maintains this tolerance across its 50–75 mm range. Is a calibration certificate supplied with the instrument? Yes, the micrometer is delivered fully calibrated to ISO 17025 and includes the calibration certificate for audit and traceability purposes. How can measurement data be transferred to a PC or data logger? Measurement values can be exported via the built-in Wireless + USB interfaces for direct logging into inspection software or spreadsheets. Are the measuring faces suitable for delicate surfaces? The broad 35 mm flat measuring faces distribute contact force over a larger area, reducing the risk of indentation on sensitive components while improving reproducibility. Does the spindle rotate during measurement and why does that matter? The spindle is non-rotating, which ensures consistent anvil contact geometry and helps to eliminate errors caused by part rotation during closure. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Screw Micrometer With 20mm Anvil, Digital Display, ISO 17025 Calibrated - Microtech Metrology
Combining 0.005 mm measurement accuracy with an included ISO 17025 calibration certificate and stable disc measuring faces Ø20 mm, this digital micrometer ensures reproducible, inspection-grade results for production control. Order the instrument directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Microtech Digital Micrometer – 50–75 mm range, 0.005 mm accuracy The micrometer is a digital outside micrometer designed for precise dimensional checks of medium-sized components in production and quality assurance. ISO 17025 calibration certificate included 0.005 mm accuracy for repeatable inspection Disc measuring faces Ø20 mm for stable contact Digital display with 0/MODE/SET/UNIT/HOLD buttons Consistent laboratory accuracy for routine inspection With a specified accuracy of 0.005 mm and a display resolution of 0.001 mm, this instrument bridges handheld convenience and lab-grade repeatability. The factory ISO 17025 calibration and accompanying calibration certificate mean readings can be relied on immediately after delivery, reducing setup time for incoming inspection or final quality checks. Such traceability is particularly valuable where documented tolerances are audited or where batch acceptance depends on tight dimensional control. Stable contact geometry for delicate and finished surfaces The disc measuring faces Ø20 mm provide a broad, even contact area that reduces local indentation and distributes contact force over the measured surface. Together with the non-rotating spindle, this geometry preserves surface finish while improving reproducibility between successive readings. The 50–75 mm span places the instrument in the middle range for workshop and inspection tasks, making it well suited to components such as shafts, housings and turned parts that require consistent outside-diameter checks. Clear digital handling and controlled measurement routine The digital display with 0/MODE/SET/UNIT/HOLD controls simplifies routine measurement: zeroing, unit selection and value hold are immediately accessible, which speeds up repetitive tasks and reduces operator errors. Microtech’s build quality supports stable calibration retention, and the compact form keeps handling comfortable during extended measurement runs. For application advice or selection between similar models, Metav Werkzeuge’s technical team is available to provide context-specific recommendations and to ensure the chosen instrument matches production needs. Contact Metav Werkzeuge to request this Microtech micrometer (SKU 110780751) with ISO 17025 calibration certificate and expert application advice — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 110780751 GTIN: 4061905457975 Manufacturer: Microtech Metrology Facts Measuring range: 50–75 mm Accuracy: 0.005 mm Resolution: 0.001 mm Special features Product category: Digital outside micrometer Measuring faces: Disc Ø20 mm Spindle: non-rotating Display: Digital with 0/MODE/SET/UNIT/HOLD Calibration: ISO 17025 certificate included FAQ What measuring range does the instrument cover? The micrometer covers a 50–75 mm measuring range, making it suitable for medium-sized shafts and housings. Is the micrometer supplied calibrated? Yes. The Microtech micrometer is delivered with an ISO 17025 calibration certificate, so documented traceability is provided at handover. What accuracy and resolution can be expected? The instrument provides an accuracy of 0.005 mm and a display resolution of 0.001 mm, appropriate for precise workshop inspections. Which measuring faces are fitted and why are they useful? The micrometer uses disc measuring faces Ø20 mm, which spread contact pressure and reduce local indentation, supporting consistent readings on finished surfaces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Thread Measuring Micrometer With Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
High-precision measurement meets modern connectivity: the micrometer offers 0.004 mm accuracy, an ultra-fine 0.0001 mm display resolution and Wireless + USB data output for fast documentation, while delivery includes an ISO 17025 calibration certificate for traceability. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application guidance. Micrometer Whitworth 55 – digital thread micrometer by Microtech Metrology Micrometer Whitworth 55 is a digital thread micrometer engineered for precise Whitworth-thread checks and small-component metrology, combining compact range with modern data transfer options. Wireless + USB data output 2.4" colour touchscreen display ISO 17025 calibration certificate included Precise measuring performance for demanding thread work The instrument delivers an industrial-grade 0.004 mm accuracy with a high-resolution readout of 0.0001 mm, making it suitable where repeatable, documented results are essential. The design features a non-rotating spindle, reducing thread damage during contact and improving measurement consistency. With a measuring span classified as Mikro (50–75 mm), this compact format focuses on fine mechanical and thread inspection tasks where rigidity and short jaw length minimise torsion and enable steady handling in the workshop or inspection bench. Modern connectivity and application-ready accessories Data capture is simplified by the 2.4" colour touchscreen and dual output channels (Wireless + USB), supporting rapid transfer into measurement software or quality logs. The device is supplied with 10x anvils 60-3.5 TPI (Whitworth 55), allowing direct comparison and efficient batch checks for Whitworth-threaded components. The digital interface reduces transcription errors and speeds up throughput, turning manual inspection steps into a faster, auditable workflow for production control or incoming inspection. Traceable calibration and partner support for quality assurance Delivered fully calibrated to ISO 17025, the micrometer includes an official calibration certificate, providing documented traceability for quality systems and audits. Manufactured by Microtech Metrology, the instrument combines proven engineering with Metav’s commitment to democratising precision: a broad selection, reliable stock and technical support from Metav Werkzeuge ensure this measuring solution integrates smoothly into both small workshops and larger quality departments. For specialised metrology tasks, this micrometer bridges hands‑on usability and documented measurement confidence. Request specific calibration data or application advice from Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Microtech Metrology micrometer (SKU 110720758) and its ISO 17025 calibration certificate Technical data Article number: 110720758 GTIN: 4061905457258 Manufacturer: Microtech Metrology Type: Whitworth 55 Facts Measuring range: 50–75 mm Resolution (display): 0.0001 mm Accuracy: 0.004 mm Display: 2.4" colour touchscreen Data output: Wireless + USB eClass: 21170328 SKU: 110720758 Special features ISO 17025 calibrated with certificate Non-rotating spindle Digital micrometer with touchscreen Includes 10x anvils 60-3.5 TPI (Whitworth 55) Designed for Whitworth-thread measurement FAQ Is the instrument supplied with an official calibration certificate? The micrometer is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability. What data interfaces are available for measurement logging? Measurements can be exported via Wireless and USB connections from the Microtech Metrology micrometer (SKU 110720758) to compatible data‑collection systems. What accuracy and resolution can be expected during routine checks? The device provides an accuracy of 0.004 mm with a display resolution of 0.0001 mm, suitable for high-precision thread inspection and quality control tasks. Are the included anvils suitable for Whitworth threads? Yes, the delivery contains 10x anvils 60-3.5 TPI (Whitworth 55), enabling direct measurement and comparison of Whitworth-threaded parts. For which applications is this micrometer best suited? The micrometer is optimised for fine mechanical and thread measurement in workshops and inspection benches, classified in the Mikro range for compact, high‑precision tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Tolerance Bore Gauge With Digital Fine Indicator, IP54 - Filetta
The combination of high-resolution readout, reliable IP54 protection and an included adjustment gauge supports consistent tolerance checks and faster inspection cycles; order the Filetta Tolerance Micrometer MS910.504 directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Tolerance Micrometer MS910.504 — Digital micrometer with IP54 protection The Tolerance Micrometer MS910.504 is a precision outside micrometer designed for workshop inspection and quality control across a 50–75 mm measuring range with fine digital readout. High precision ±0.005 mm accuracy Resolution 0.001 mm (1 µm) display Digital mm/inch display and rechargeable battery IP54 protection and supplied in transport case Reliable metrology for shop-floor quality control The MS910.504 offers an industrial-grade mix of high resolution and repeatable accuracy: a 0.001 mm display combined with a stated ±0.005 mm accuracy makes it suitable for routine dimensional control and pass/fail verification in small-batch production. The nominal measuring range of 50–75 mm covers typical components, fixtures and turned parts encountered in mechanical workshops. By converting fine numerical resolution into tangible process reliability, the instrument reduces rework and inspection uncertainty during assembly and finishing. Designed for robust use and simple handling Built for active workshop conditions, the instrument carries an IP54 rating that resists dust ingress and splashing, while a rechargeable lithium battery and a clear mm/inch display simplify repeated checks across shifts. The micrometer features Ø6.5 mm measuring faces and a measured 5–10 N measuring force to balance contact stability with surface protection; this combination helps to minimise operator-induced variation. An adjustment gauge included ensures the device can be verified and set up quickly after transport, and the supplied transport case protects the instrument between uses. Practical benefits for inspection routines and traceable workflows Integrating the instrument into inspection routines shortens measurement cycles: the digital readout accelerates data capture compared with mechanical scales, while the compact range and sturdy frame make handling straightforward. The device is particularly well suited for component shops, toolrooms and final inspection benches where consistent tolerance checks are required. For applications that demand traceable set-up, the included gauge and clear specification of measuring force help establish repeatable measurement conditions and support documented quality procedures. For application advice or to arrange procurement of the Filetta Tolerance Micrometer MS910.504 with IP54 protection and rechargeable power, contact Metav Werkzeuge for tailored guidance and prompt delivery from Emmerich. Technical Data Article number: MS910.504 Manufacturer: Filetta Product: Tolerance micrometer IP protection: IP54 Facts Measuring range: 50–75 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Measuring faces diameter: Ø 6.5 mm Special features Digital display with mm/inch and On/Off Rechargeable lithium battery Measuring force 5–10 N Adjustment gauge included Supplied in transport case FAQ What measuring range does this micrometer cover? The Filetta Tolerance Micrometer MS910.504 covers a measuring range of 50–75 mm and is intended for precision outside measurements within that span. How accurate and precise is the instrument? The MS910.504 provides a display resolution of 0.001 mm and a stated accuracy of ±0.005 mm, suitable for routine workshop inspection and dimensional checks. Is the micrometer suitable for shop-floor use? Yes, the Filetta micrometer is rated IP54 for protection against dust and splashes and includes a rechargeable lithium battery for continuous use on the shop floor. Does the delivery include any accessories for setup? The micrometer is supplied with an adjustment gauge included and comes in a transport case to protect the instrument during storage and transport. Can measurements be read in imperial units? Yes, the digital readout on the MS910.504 supports both mm and inch displays and includes an On/Off button for simple operation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
50-75mm Tube Wall Thickness Micrometer Colour Touchscreen, Wireless+USB, IP65, ISO 17025 - Microtech Metrology
High-resolution measurement capability, robust ingress protection and plug‑and‑play data transfer make this micrometer an efficient choice for tube wall inspection; its ISO 17025 calibration certificate ensures traceable results straight from delivery. Order via Metav Werkzeuge or contact the consultants for application advice. Microtech Tube Wall Thickness Micrometer with Microcomputer — 0.0001 mm resolution, Wireless+USB The Microtech tube wall thickness micrometer is a digital instrument designed for precise measurement of tube walls across the 50–75 mm diameter range. 0.0001 mm reading resolution ISO 17025 calibration certificate included Wireless HID and USB HID data output IP65 protection with 2.4" colour touchscreen Precision that delivers reproducible thickness control High-resolution sensing combined with industrial-grade accuracy reduces measurement uncertainty during routine inspections. The instrument reads to 0.0001 mm (0.1 µm) and specifies an accuracy of ±0.003 mm, which supports reliable process control for tube wall checks. The measuring range of 50–75 mm targets medium-sized tubes while being suitable for wall thicknesses from 4.7 mm upwards. This performance profile is particularly useful where repeatable, comparable thickness values are required for quality reports and batch acceptance. Seamless data transfer to quality systems Integrated Wireless HID and USB HID connectivity allow direct transfer of measured values into spreadsheets, inspection apps or quality databases on Windows, Android, iOS, macOS and Linux systems. Long‑range wireless options and standard USB HID reduce manual transcription and accelerate data capture during batch checks, supporting faster inspection cycles and lower administrative overhead. The 2.4" colour touchscreen provides immediate readout and menu navigation before data export. Robust, ergonomic design for workshop use A protective IP65 enclosure shields electronics from chips and coolant, while the friction ratchet and rotating spindle ensure uniform measuring force and repeatable seating on curved surfaces. The tactile feedback of the ratchet and the spindle rotation improve operator consistency, reducing influence from variable hand pressure. The colour touchscreen and balanced handle design support comfortable, single‑hand operation during repetitive checks. Traceable calibration and compliance ready Delivered with an ISO 17025 calibration certificate, the instrument is ready for use in accredited inspection processes. The included calibration certificate documents traceability and measurement uncertainty, easing internal audits and supplier acceptance. Having calibration performed to the ISO 17025 standard removes the immediate need for local re‑calibration and simplifies integration into formal quality systems. Contact Metav Werkzeuge to discuss suitability for specific tube geometries and to secure a Microtech tube wall thickness micrometer with ISO 17025 calibration and Wireless+USB data output Technical data Article number: 110350758 GTIN: 4061905040863 Manufacturer: Microtech Metrology Display: Colour 2.4" touchscreen Data output: Wireless+USB Facts Measuring range: 50–75 mm Suitable for tube wall thicknesses from 4.7 mm Resolution: 0.0001 mm Accuracy: ±0.003 mm Protection class: IP65 Calibration: ISO 17025 certificate included Special features Friction ratchet for consistent measuring force Rotating spindle for easy engagement on curved surfaces Long-range wireless and USB HID data transfer Colour 2.4" touchscreen for clear readout and control FAQ What measuring range does the micrometer cover? The micrometer covers a measuring range of 50–75 mm and is intended for tube diameters within that span. Can this instrument measure thin tube walls? Yes, the micrometer is suitable for tube wall thickness measurements from 4.7 mm and above. Is a calibration certificate supplied with the device? A full ISO 17025 calibration certificate is supplied with the instrument, documenting traceability and measurement uncertainty. How are measured values exported to a PC or tablet? Measured values are exported via Wireless HID or USB HID, compatible with Windows, Android, iOS, macOS and Linux platforms. Is the micrometer suitable for workshop environments? Yes, the housing is rated IP65 and the unit features a friction ratchet and rotating spindle to support reliable workshop use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Tube Wall Thickness Micrometer Digital Friction Thimble IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a rugged, IP65-rated digital instrument with 0.001 mm resolution and accuracy ±0.003 mm for reproducible wall‑thickness checks on tube assemblies; delivered with an ISO 17025 calibration certificate for traceable quality control. Order the CertiMet TUBE directly via Metav Werkzeuge or ask our consultants if needed. CertiMet TUBE digital micrometer – tube wall thickness micrometer, IP65, ISO 17025 (Microtech Metrology) The CertiMet TUBE digital micrometer is a purpose‑built instrument for measuring tube wall thickness between 50–75 mm, combining a sealed aluminium housing with a precision friction thimble for consistent results in production and inspection environments Digital display, mm/inch and hold function IP65 aluminium housing for harsh environments ISO 17025 calibration certificate included Friction thimble for reproducible measuring force Reliable results under production conditions The sealed IP65 housing and robust aluminium construction make the instrument suitable for workshop and site use where splash, coolant or dust are present. A clear digital display with selectable mm/inch readout and a hold function speeds up throughput at inspection stations, while the integrated origin feature simplifies repetitive checks. The combination of environmental protection and intuitive functions reduces re‑measurements and supports consistent sampling routines. Reproducible measurement force for traceable checks A calibrated friction thimble ensures a consistent contact force on each measurement, which is crucial when verifying thin tube walls. With a resolution of 0.001 mm and accuracy ±0.003 mm, the instrument delivers the quantitative certainty required for in‑process quality control and conformity testing. This precision helps to reduce scrap and rework by catching deviations earlier in the production cycle, turning measurement data into actionable decisions. Traceable calibration and customisation for specialised tasks The instrument is supplied with an ISO 17025 calibration certificate (Ilac MRA), making results auditable and suitable for regulated production environments. For unusual profiles or non‑standard tube diameters a custom tube anvil can be requested to adapt the contact geometry, ensuring correct seating and repeatability on curved surfaces. These options support integration into formal quality systems and reduce uncertainty in acceptance testing. Contact Metav Werkzeuge to discuss the Microtech Metrology CertiMet TUBE, request a customised anvil or receive the ISO 17025 calibration documentation from our Emmerich quality team Technical data Article number: 110350751 GTIN: 4061905040559 Manufacturer: Microtech Metrology Category: Messschrauben Core specifications Measuring range: 50–75 mm Resolution: 0.001 mm Accuracy: ±0.003 mm Protection class: IP65 Features & materials Friction thimble micrometer head Functions: mm/inch, origin, hold Aluminium housing Calibration: ISO 17025 certificate included Custom tube anvil on request FAQ What measuring range does the micrometer cover? The instrument covers a measuring range of 50–75 mm, which is intended for tube wall thickness checks on small to medium‑diameter tubing. Is a calibration certificate supplied with the device? Yes, the micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA), providing traceability for audit‑ready quality control. How consistent are repeated measurements? Repeatability is supported by the friction thimble and digital readout; combined resolution of 0.001 mm and accuracy of ±0.003 mm ensures high reproducibility for serial inspections. Can the micrometer be used in wet or dusty environments? The IP65 rated aluminium housing protects the instrument from jets of water and ingress of dust, making it suitable for many production environments. Is it possible to adapt the contact for specialised tube profiles? Yes, a custom tube anvil can be supplied on request to match specific tube curvature and ensure correct seating during measurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-75mm Universal Micrometer With 7 Pair Measuring Inserts, Color 2.4" Touchscreen, IP65, ISO 17025 - Microtech Metrology
The combination of ISO 17025 traceable calibration, robust IP65 protection and flexible Wireless+USB data transfer provides reliable measurement results and smooth integration into digital workflows. Benefit from the instrument’s high 0.004 mm accuracy and the included set of 7 pairs of measuring inserts to cover a wide range of workshop tasks. Order the micrometer directly via Metav Werkzeuge or ask the consultants for application advice. Universal micrometer — Digital 50–75 mm range, IP65 protection (Microtech Metrology) Universal micrometer is a compact digital micrometer for precise external measurements in the 50–75 mm range, suited to production control and workshop inspection. ISO 17025 calibrated with certificate IP65 protection for shop-floor reliability Wireless+USB data transfer for traceability Colour 2.4" touchscreen for intuitive operation Traceable precision for production control The instrument delivers a stated accuracy of 0.004 mm, giving a clear quantitative basis for process decisions and quality documentation. Supplied calibrated to ISO 17025, the device is delivered with a formal calibration certificate, enabling immediate use in traceability chains and internal quality systems. The high reproducibility supports consistent part acceptance limits and shortens inspection cycles. Robust design and easy data integration Equipped with IP65 protection, the digital unit withstands coolant sprays and typical workshop contaminants while maintaining measurement stability. Data export over Wireless+USB simplifies transfer to SPC or measurement software, reducing manual transcription and associated errors. The 2.4" colour touchscreen provides direct readout and menu control, speeding up routine checks and enabling faster operator throughput. Non-rotating spindle and versatile measuring inserts A non-rotating spindle reduces frictional wear on the anvil and measuring faces, improving long-term repeatability. The delivery includes 7 pairs of measuring inserts, allowing adaptation to different workpiece geometries without changing the entire instrument. This versatility reduces fixture changes and supports diverse inspection tasks across batches and setups. Practical benefits in everyday metrology Built as a digital micrometer for shop and lab use, the unit combines traceability, connectivity and practical ergonomics to support lean inspection routines. The compact footprint and clear display make it suitable for bench-side quality checks as well as for integration into measurement stations. The instrument’s specifications align with typical industrial needs for fast, documented and auditable measurements. Contact Metav Werkzeuge to discuss how the Microtech Metrology digital micrometer can be integrated into existing inspection routines and to request the ISO 17025 calibration certificate from our Emmerich quality hub Technical Data Article number: 110750758 GTIN: 4061905040351 Manufacturer: Microtech Metrology Digital display: Colour 2.4" touchscreen Data output: Wireless+USB Protection class: IP65 Included: 7 pairs of measuring inserts Delivered calibrated to ISO 17025 with certificate Facts Measuring range: 50–75 mm Accuracy: 0.004 mm Category: Micrometers (messschrauben) SKU: 110750758 Special features Non-rotating spindle Digital instrument for external measurements Suitable for workshop and process control applications Wireless and USB connectivity for data capture FAQ What measurement range does this micrometer cover? The micrometer covers an external measurement range of 50–75 mm, suitable for medium-sized workpieces and production control. Is the instrument supplied calibrated? Yes, the device is delivered calibrated to ISO 17025 and includes a calibration certificate for traceability and documentation. How can measurement data be transferred to quality systems? Data export is available via Wireless+USB, enabling direct capture into SPC software or measurement databases. Are measuring inserts included and what do they offer? The delivery contains 7 pairs of measuring inserts, which expand the micrometer’s adaptability to different geometries without replacing the whole unit. Is the micrometer suitable for workshop conditions? With IP65 protection and a robust design, the micrometer is intended for regular workshop use and resists spray and dust typical in production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500 mm Extension Rod Ø28 mm For Rod Inside Micrometers - Metav IndustryLine
The combination of a 500 mm reach and a Ø28 mm shank provides extended access to deep bores while maintaining a secure mechanical connection; this robust extension enhances repeatable internal measurements and integrates seamlessly with existing rod micrometer sets. Order the extension directly via Metav Werkzeuge or consult our specialists for specification support. 500 mm extension rod Ø28 for 310.065 / 310.066 / 310.067 — extension for internal micrometer sets (Metav IndustryLine) The 500 mm extension rod Ø28 extends the reach of rod-style internal micrometer sets for reliable deep-bore measurement in workshop and production environments 500 mm extension for deep-bore measurement Ø28 mm shank for secure coupling Compatible with 310.065, 310.066, 310.067 Robust construction, industrial weight 6 kg Greater reach for deep-bore inspection with minimal setup The 500 mm extension rod increases the effective reach of rod-style internal micrometers, enabling access to bores and recesses that would otherwise require disassembly or special tooling. Extending the measuring range in this way shortens process steps and reduces handling time, which supports smoother production flow. The design focuses on mechanical stability: a defined shank interface and industrial mass lower susceptibility to incidental vibration, which helps preserve measurement reliability when probing deep features. Secure coupling and dimensional stability for repeatable results A Ø28 mm shank provides a positive mechanical interface with compatible rod sets, ensuring concentric seating and consistent repeatability across measurements. The accessory is listed as compatible with models 310.065, 310.066 and 310.067, so coupling and alignment can be planned into inspection fixtures. The extension’s mass contributes to a steadier measurement chain; while longer probes inherently demand attention to setup and support, the combination of substantial diameter and industrial weight reduces flex and improves the chance of reproducible readings in workshop environments. Practical workshop integration and durable accessory design Engineered as a purpose-built accessory for rod micrometer systems, the extension facilitates inspections that standard rods cannot reach. The simple, single-component form factor eases handling and storage, and the clear compatibility with established sets makes integration into inspection routines straightforward. For procurement and logistical planning, the extension is supplied under the Metav IndustryLine range and bears the SKU M310.066.6 and GTIN for inventory control, supporting traceable stock management and consistent part identification. Contact Metav Werkzeuge to specify the Ø28 extension for internal micrometer sets and ensure the accessory matches the inspection chain requirements Technical Data Article number: M310.066.6 GTIN: 4054469160993 Label: 500 mm extension for 310.065, 310.066, 310.067 Dimensions & Core Data Length: 500 mm Shank diameter: Ø 28 mm Weight: 6 kg Features & Compatibility Compatible with internal micrometer rod sets 310.065 / 310.066 / 310.067 Category: Accessory — Measuring devices Tariff number: 90173000 eClass: 21019104 ETIM: EC002219 FAQ What is the extension rod intended for? The 500 mm extension rod Ø28 by Metav IndustryLine is intended to extend the reach of rod-style internal micrometers for measurements in deep bores, recesses and hard-to-reach internal features. Which micrometer sets are compatible with this extension? Compatibility is specified for the internal micrometer rod sets 310.065, 310.066 and 310.067; the extension is designed to mate with those systems. What are the main dimensions and mass of the extension? The extension measures 500 mm in length with a shank diameter of 28 mm and a mass of 6 kg. Is the material or coating specified for the extension? No specific material or coating is stated in the provided product data for the 500 mm extension rod Ø28. How does adding this extension affect measurement accuracy? Longer probe assemblies can increase the risk of deflection; however, the Ø28 shank and the accessory’s mass are intended to improve the stability of the measurement chain and support repeatable results when properly supported. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500-600mm Digital Micrometer Caliper With Friction Ratchet, IP65, ISO 17025 Calibrated - Microtech Metrology
Combining robust IP65 protection, traceable ISO 17025 calibration and a fine 0.001 mm reading creates a dependable solution for large-format dimensional control; the integrated friction ratchet and Ø25 mm measuring faces ensure repeatable contact pressure and stable readings. Order the device directly via Metav Werkzeuge or consult our specialists for application advice. Digital outside micrometre by Microtech Metrology — 500–600 mm, IP65 A digital outside micrometre designed for large-range industrial measurement up to 600 mm, combining rugged protection, traceable calibration and high-resolution display for consistent production and inspection workflows. IP65-rated digital measuring head ISO 17025 calibration certificate included 0.001 mm display resolution, 0.008 mm accuracy Ø25 mm hardened measuring faces Consistent large-range capability for heavy components The instrument is built for measurements in the 500–600 mm class, a range where rigidity and repeatability become decisive. The long spindle geometry and substantial measuring faces deliver stable contact over extended spans, reducing flex and operator-induced error when inspecting housings, fixtures or large shafts. The integrated friction ratchet standardises contact force on each measurement, which, combined with the broad Ø25 mm measuring faces, translates into reliable readings across long inspection runs and reduces rework in production. Traceable accuracy that supports quality systems Traceability is front and centre: the micrometre is supplied with an ISO 17025 calibration certificate (Ilac MRA), making it suitable for accredited test labs and internal quality audits. The digital head offers a 0.001 mm display resolution while the verified instrument accuracy of 0.008 mm ensures measurements meet rigorous tolerances. For quality managers and inspection engineers this means fewer disputes over measurement data and straightforward integration into control plans and documentation chains. Robust construction and practical features to cut downtime Designed for workshop use, the digital micrometre combines an IP65-protected readout with a durable frame that withstands coolant spray and dusty environments. The digital head is sealed and the supplied setting rods facilitate in-situ verification and quick zeroing, saving time during shift changes. At approximately 2.6 kg the instrument balances mass for stability with manageable handling during two-person tasks. These practical design choices reduce the frequency of recalibration cycles and keep inspection stations productive. Discuss the Microtech digital outside micrometre with Metav Werkzeuge to confirm suitability for specific large-part applications and to arrange calibrated delivery from Emmerich. Technical data Article number: 110176001 GTIN: 4061905040221 Manufacturer: Microtech Metrology IP rating: IP65 Digital display: yes Calibration: ISO 17025 certificate included Core measurements Measuring range: 500–600 mm Resolution (reading): 0.001 mm Accuracy: 0.008 mm Measuring faces: Ø25 mm Weight: 2.6 kg Features Friction ratchet Setting rods included Digital micrometre head (IP65) Calibration certificate ISO 17025 (Ilac MRA) ECLASS: 21170328 ETIM: EC003590 FAQ What calibration documentation is supplied with the micrometre? The micrometre is delivered with an ISO 17025 calibration certificate (Ilac MRA), confirming traceability and suitability for laboratory and audit requirements. What resolution and accuracy can be expected from this instrument? The digital display shows 0.001 mm steps while the instrument’s verified accuracy is 0.008 mm, making the device appropriate for precise large-part inspections. How does IP65 protection benefit workshop use? An IP65 rating means the digital head is dust-tight and protected against water jets, so the micrometre’s electronics remain reliable in coolant-splashed or dusty production environments. Are accessories included to set or check the micrometre? Yes, the delivery includes setting rods for quick verification and zero checks, enabling fast on-site validation before measurement tasks. Is the friction ratchet applicable for repeatable measurements? The integrated friction ratchet provides consistent contact force and helps produce repeatable results across multiple measurements, particularly useful on larger components Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500-600mm External Micrometer With Colour Touchscreen, ISO 17025 Calibration Included - Microtech Metrology
Take advantage of high‑capacity data handling, reliable sub‑10 µm accuracy and a robust CNC‑machined aluminium frame for consistent measurements of large components. The calibrated instrument comes with an ISO 17025 certificate and wireless plus USB data transfer, allowing immediate integration into inspection workflows. Order directly via Metav Werkzeuge or contact the consultants for application advice. Outside micrometer — Microtech Metrology with wide range and digital MICS control The outside micrometer combines a large measuring span with a colour touchscreen and wireless data transfer for measurement tasks on medium to large assemblies. Large 500–600 mm measuring span Colour 1.5" touchscreen display Wireless and USB data transfer ISO 17025 calibration certificate included Precision across a large measuring span for repeatable assemblies This micrometer is engineered for applications that demand reach without sacrificing repeatability: the instrument covers the 500–600 mm measuring span and therefore sits in the large‑range class suitable for heavy components, fixtures and housings. The specified accuracy 0.006 mm delivers reliably small measurement uncertainty across the entire span, which makes this tool appropriate for quality control tasks where tolerance stacks matter. The relatively compact weight and Ø25 mm measuring faces ensure stable contact and avoid excessive local deformation on workpieces while providing consistent results. Seamless data workflows to speed up inspection and reporting Connectivity is a core advantage: the unit offers wireless data output alongside USB, four transfer modes and HID compatibility, enabling direct logging into measurement software or spreadsheets. The integrated memory manager holds 2,000 values with folder and statistics support, reducing manual recording and speeding up batch inspections. For automated environments the device supports the MICS system and optional Modbus RTU, so measurement data can be routed to production databases or SPC systems without additional converters, improving traceability and reducing transcription errors. Robust construction and calibrated traceability for shop‑floor confidence The frame is a CNC‑machined aluminium housing, designed for structural rigidity and long service life under workshop conditions. The colour 1.5" touchscreen display provides clear readouts and access to functions such as max/min, formula inputs and temperature correction, helping to convert instrument capabilities into usable results. The micrometer is delivered fully calibrated according to ISO 17025 (Ilac MRA), and a calibration certificate is included, which supports supplier audits and documented quality processes on the shop floor. Practical benefits for production and tooling departments With a broad measuring range and integrated data management the instrument shortens inspection cycles and reduces handling. The combination of a tactile measuring frame and electronic data output cuts recording errors and speeds up part sign‑off. The design is particularly well suited where assembly or fixture dimensions must be validated repeatedly and where documented, calibrated measurement records are required for quality assurance. Contact Metav Werkzeuge today for a tailored consultation and secure a calibrated Microtech Metrology outside micrometer with ISO 17025 certificate and industrial data connectivity Technical data Article number: 110186008 GTIN: 4061905039584 Manufacturer: Microtech Metrology Key measurements Measuring range: 500–600 mm Measuring faces: Ø25 mm Accuracy: 0.006 mm Weight: 2.6 kg Display: Colour 1.5" touchscreen Features & functions Wireless + USB data output Memory manager, 2,000 values CNC‑machined aluminium housing Calibration certificate ISO 17025 (Ilac MRA) included MICS system for advanced measurement modes 4 modes data transfer (Wireless MDS app, Wireless HID, Wireless HID+MAC, USB HID) Optional Modbus RTU for industrial connections FAQ How is traceability ensured for calibration? The micrometer is delivered fully calibrated with an ISO 17025 certificate (Ilac MRA), which documents traceability and supports quality audits. Can measurement data be integrated into company SPC software? Yes, the unit supports wireless and USB transfer, HID modes and optional Modbus RTU, enabling direct integration into SPC or factory data systems. What makes this instrument suitable for larger components? The 500–600 mm measuring span and rigid CNC‑machined housing provide the reach and stability required for medium to large assemblies and fixtures. How many readings can be stored on the device? The internal memory manager stores up to 2,000 values with folder organisation and basic statistics, reducing manual logging. Is the touchscreen usable in a busy workshop environment? The colour 1.5" touchscreen offers clear visibility and straightforward access to functions such as temperature correction, formulas and max/min recording. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
5000-6000mm Modular Bench Micrometer Colour Touchscreen, Wireless, IP65, ISO 17025 - Microtech Metrology
Take advantage of modular construction, Industry 4.0 connectivity and an ISO 17025 calibration certificate to bring reproducible large‑scale measurement into production. Order the device directly via Metav Werkzeuge or consult our specialists for system integration and transport planning. Frame micrometer — modular C‑frame micrometer with wireless and USB data output A modular frame micrometer designed for ultra‑long measurements and industrial digitisation, ideal for large components and integration into automated data systems. Modular construction for easy transport ISO 17025 calibration certificate included Wireless and USB HID data transfer CNC-machined aluminium C‑frame housing Precision for very large components and heavy industry This measuring instrument is engineered for an ultra‑long measuring range of 5,000–6,000 mm, making it suitable for large shafts, housings and heavy machinery components where reproducibility over long spans is essential. The substantial C‑frame and CNC‑machined aluminium housing keep the structure stable under load; combined with Ø50 mm measuring faces and a multi‑module build, the system maintains alignment across its length. The design therefore reduces rework and measurement variability when handling oversized parts. Industry 4.0 ready: fast, error‑proof data flow Equipped with a Colour 1.5" touchscreen and multiple data modes, the instrument supports wireless and wired workflows to reduce manual entry and traceability gaps. Native Wireless HID, USB HID and optional MODBUS RTU interfaces allow direct connection to PCs, tablets and PLCs; a Memory Manager stores 2000 values with folder organisation and statistical summaries. These features speed up quality loops and simplify process documentation, helping to cut cycle times and to feed measurement data directly into production control systems. Delivered calibrated for reliable results The device is supplied fully calibrated and includes an ISO 17025 calibration certificate, so the measuring chain can be validated immediately after installation. Readout resolution is 0.0001 mm, while the stated measurement accuracy is listed as 0.09. Together with a comprehensive calibration protocol, this guarantees a defined uncertainty budget for incoming inspection and in‑process checks. The calibration documentation supports quality audits and simplifies adherence to internal inspection plans. Modular handling and on‑site adaptability Patented modular construction enables disassembly for transport and reassembly on site within a short timeframe, making the instrument practical for workshops that need a portable yet high‑capacity measuring solution. The measuring hub supports wireless MICROTECH instrument connections, synchronization, 2D graphing and probe modes for specialised tasks. IP 65 protection ensures resilience against chips and coolant in heavy‑duty environments, while the robust build and transportable modules ease logistics for large‑scale metrology operations. Contact Metav Werkzeuge for a tailored integration proposal, technical consultation or to discuss factory acceptance testing for the Microtech Metrology frame micrometer—call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 110160605 GTIN: 4061905040290 Manufacturer: Microtech Metrology IP protection: IP 65 Digital display: Colour 1.5" touchscreen Core figures Measuring range: 5000–6000 mm Measuring range (max): 6000 mm Measuring range (min): 5000 mm Resolution (reading): 0.0001 mm Accuracy: 0.09 Weight: 79 kg Modules: 6 Measuring faces: Ø50 mm Memory capacity: 2000 values Special features Modular construction for transport and assembly Wireless + USB data output (Wireless HID, USB HID) Optional MODBUS RTU (RS‑485) for industrial networks CNC‑machined aluminium C‑frame housing Calibration certificate ISO 17025 included Industry 4.0 MICS system with online graphic, Go/NoGo and statistics Wireless MICROTECH instrument connection and 2D graph modes IP 65 rated for harsh workshop environments FAQ What size of components is this instrument intended for? The frame micrometer from Microtech Metrology is designed for very large components with a measuring range of 5,000–6,000 mm, making it appropriate for heavy machining, pipe and vessel work and large bearing assemblies (SKU 110160605). Is the device ready for integration into existing measurement systems? Yes — the instrument supports Wireless HID, USB HID and an optional MODBUS RTU output; built‑in memory and the MICS system permit straightforward data transfer and integration into production networks. Does the instrument arrive calibrated and documented? Delivery includes an ISO 17025 calibration certificate, so the measuring chain is documented and auditable as soon as the instrument is put into service. Which environmental conditions can the instrument withstand? The measuring system is rated IP 65, protecting it against dust ingress and water jets commonly encountered in industrial workshops. How does the modular design benefit workshop logistics? The patented modular construction allows the large‑format instrument to be disassembled for transport and reassembled on site, simplifying logistics for customers who need a high‑capacity measuring solution without specialised freight arrangements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Micrometer With 35mm Anvil Plate, Touchscreen Digital Readout, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from high repeatability, ISO 17025 calibration and seamless data transfer via Wireless+USB for reliable inspection results; order the micrometer directly via Metav Werkzeuge or consult our advisors for specification support. Digital Micrometer — 475–500 mm range, 1.54" touchscreen & Wireless+USB (Microtech Metrology) A Digital Micrometer designed for precise thickness and depth checks on medium‑sized components in workshop and inspection environments. ISO 17025 calibrated with certificate Wireless and USB data output 475–500 mm measuring range 1.54" touchscreen display 35 mm plate measuring faces Precise measurement where reach and stiffness meet The large‑format measuring range of 475–500 mm places this instrument in the medium category for workshop metrology, offering a pragmatic balance between reach and rigidity. With a stated accuracy of 0.01 mm, the device suits routine quality control and assembly checks where reproducible results are required across larger fixtures or housings. The broad measuring span reduces the need for multiple instruments, streamlining inspection setups and saving handling time; when measuring larger parts, consistent stiffness and a clear readout deliver dependable decisions at production pace. Fast digital capture and documented traceability Data capture is simplified by the combination of Wireless+USB connectivity and a 1.54" touchscreen, enabling direct transfer of readings into inspection software or spreadsheets and eliminating transcription errors that slow workflow. Supplied fully calibrated to ISO 17025 with a calibration certificate, the instrument supports audit trails and regulatory compliance. This combination of traceable calibration and digital output increases confidence in batch acceptance and provides clear evidence for quality records, helping to shorten approval cycles and reduce rework. Stable contact design for repeatable results The measuring faces are large Teller Ø35 mm plates and the spindle is designed as a non‑rotating spindle, which together give uniform contact and reduce surface wear during measuring. Such features help to maintain consistent measuring force and contact geometry, so readings remain repeatable even on uneven or coated surfaces. The result is a robust measuring routine: fewer adjustments, reduced scrap risk and more predictable inspection throughput for machine shops and toolrooms that demand reliability from each check. Built for integration into inspection routines Beyond individual readings, the instrument functions as a practical element of modern shopfloor metrology. The digital interface and data ports enable connection to data loggers and quality-management systems, while the compact touchscreen provides intuitive operation for operators and inspectors alike. The solid construction and straightforward control scheme mean short training times and immediate value in production monitoring; paired with Metav’s application support, the device becomes part of a controlled measurement chain that improves process capability and reduces uncertainty. Discuss the Microtech Metrology ISO 17025‑calibrated digital micrometer with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and delivery options Technical data Article number: 110785007 GTIN: 4061905457630 Manufacturer: Microtech Metrology Core technical data Measuring range: 475–500 mm Resolution / accuracy: 0.01 mm Display: 1.54" touchscreen Measuring face diameter: Ø35 mm Special features Digital micrometer with touchscreen Wireless+USB data output Non‑rotating spindle Delivered calibrated to ISO 17025 with certificate Suitable for medium‑range component inspection FAQ What measuring range does this micrometer cover? The instrument covers a measuring span of 475–500 mm, suitable for medium‑sized components and fixtures. Is the micrometer delivered calibrated? Yes, this Microtech Metrology digital micrometer is supplied fully calibrated to ISO 17025 and includes a calibration certificate. How are readings transferred to inspection software? Readings can be exported via Wireless+USB connections for direct integration into quality systems and spreadsheets. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500–600mm Digital Bore Micrometer With Carbide Measuring Faces, Ratchet Stop, Plastic Case - Metav IndustryLine
Take advantage of a robust workshop instrument that combines a wide 500–600 mm measuring band, high-resolution digital readout and carbide measuring faces for long-term wear resistance; the result is fast, repeatable external measurements and seamless data transfer. Order the micrometer directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. M302.028.C — Digital outside micrometer 500–600 mm with carbide measuring faces (Metav IndustryLine) The M302.028.C is a high-range digital outside micrometer engineered for accurate external measurements of sizeable components in production and workshop environments. Digital display with ABS/INC and UNIT keys Carbide measuring faces for extended wear resistance Integrated ratchet stop for consistent contact force Measuring range 500–600 mm with fine spindle pitch Accurate measurement for large external dimensions The instrument delivers dependable results across a broad measuring span, combining a digital display with a fine 0.5 mm spindle pitch to support controlled, gradual adjustments. The readout resolution of 0.001 mm provides micron-level increments, while the specified accuracy of ±0.015 mm reflects a realistic repeatability expectation for workshop instruments in this size class. This balance of resolution and accuracy makes the micrometer suitable for routine quality checks on large shafts, housings and assemblies where clear numeric readouts reduce interpretation errors and speed up inspection cycles. Streamlined data capture and process integration Equipped with RB 4.1 data output and a user-friendly control array (ON/OFF/SET, ABS/INC and UNIT), the device supports straightforward transfer of measurement results into digital quality workflows. The measurement capture features enable faster logging and minimise transcription mistakes during batch inspections, contributing to improved traceability and simplified reporting. Incorporating digital transfer into existing SPC or data-logging setups reduces manual rework and helps maintain consistent production tolerances. Durable mechanics and ergonomic handling for daily use Wear-prone contact areas are protected by carbide measuring faces, extending service life under frequent use. The matt chrome-plated measuring drum offers a tactile, low-glare grip surface for fine adjustments, while the ratchet stop ensures consistent contact force and reduces operator-induced variance. Built for workshop conditions, the construction supports robust everyday handling without sacrificing measurement fidelity; routine maintenance is limited to periodic cleaning and spindle lubrication to keep accuracy stable over time. For reliable external measurements across the 500–600 mm range with stable data output, choose the Metav IndustryLine M302.028.C — contact Metav Werkzeuge in Emmerich for detailed technical advice or to request a quotation via info@metav-werkzeuge.com Technical data Article number: M302.028.C GTIN: 4054469163017 Category: Messschrauben (outside micrometer) Brand: Metav IndustryLine Facts Measuring range: 500–600 mm Resolution (display): 0.001 mm Specified accuracy: ±0.015 mm Spindle pitch: 0.5 mm per revolution Spindle diameter: 8 mm Tariff number: 90173000 Standard: Werksnorm Special features Carbide measuring faces (HM) Digital display with ON/OFF/SET, ABS/INC and UNIT keys Data output: RB 4.1 Integrated ratchet stop for consistent measuring force Matt chrome-plated measuring drum FAQ What measurement range does this micrometer cover? The M302.028.C covers an external measuring band from 500 to 600 mm, making it suitable for larger shafts and housings where precise external dimensions are required. What resolution and accuracy can be expected from this instrument? This digital micrometer offers a display resolution of 0.001 mm and a specified accuracy of ±0.015 mm, providing micron-scale readability with realistic workshop-level repeatability. How are results transferred to a PC or data-logging system? Data export is provided via the RB 4.1 interface; the M302.028.C can feed captured measurements into compatible SPC or logging systems for traceable records. Are the measuring faces wear-resistant for production use? Yes—the measuring faces are made of carbide (HM), which increases wear resistance and prolongs the service life under frequent measurement cycles. Does the instrument include features to reduce operator-induced variation? The built-in ratchet stop ensures a repeatable contact force for each measurement, while the fine spindle pitch allows controlled approach to the workpiece, reducing variability between operators. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Bore Gauge Micrometer With Microcomputer Wireless/USB Output ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable calibration and integrated data transfer: ISO 17025 calibration certificate plus reliable 0.003 mm accuracy ensure measurements are ready for quality documentation and process control. The compact digital design with Wireless and USB outputs speeds up data capture and reduces transcription errors. Order the micrometer with microcomputer directly via Metav Werkzeuge or ask our consultants if needed. Micrometer with microcomputer — digital outside micrometer, Wireless + USB (Microtech Metrology) The micrometer with microcomputer is a compact digital outside micrometer designed for precision workshop and laboratory measurement up to 50 mm, combining certified calibration and modern data transfer for streamlined quality workflows. Digital display, 0.0001 mm resolution Delivered with ISO 17025 calibration certificate Wireless and USB data output Measuring range 0–50 mm, Ø8 mm anvils Traceable accuracy for production and inspection The enclosed calibration certificate (issued to ISO 17025 standards) confirms that measurement results meet laboratory-grade traceability and can be used directly for quality records. The instrument’s stated 0.003 mm accuracy is suitable for demanding inspection tasks and provides a verifiable tolerance basis for pass/fail decisions. The combination of a high-resolution display (0.0001 mm) and a robust error specification supports reproducible checks in incoming inspection, in-process control and final inspection routines, reducing the need for repeat measurements and thereby improving throughput. Seamless data capture and process integration Equipped with both Wireless and USB data outputs, the device transfers readings directly into inspection software or spreadsheet workflows, eliminating manual entry and the associated error risk. The digital readout and integrated microcomputer enable straightforward interfacing with standard data loggers and SPC systems; this facilitates automated documentation and archive creation. Connectivity options support modern shop-floor layouts where remote collection and centralised data handling accelerate decision-making and corrective-action loops. Compact form factor for fine engineering With a measuring range of 0–50 mm, the instrument falls into the compact micrometer class suitable for precision tasks in toolmaking, small-part assembly and microengineering. The Ø8 mm measuring faces and measuring depth 18 mm are designed to offer stable contact geometry on small diameters and thin-walled components, while keeping the frame short for minimal flex. The compact footprint simplifies handling in tight fixtures or bench-top jigs and supports repeatable clamping for series checks. Built for repeatability and workshop reliability The digital micrometre’s solid measurement concept, combined with microcomputer control, prioritises consistent results and operator efficiency. The ready-to-use delivery, including the calibration certificate, removes setup ambiguity and accelerates integration into quality procedures. Robust data output and a clear, fast display reduce measurement cycle time and help maintain traceability; this makes the instrument a practical choice for inspection labs, maintenance departments and precision workshops looking to modernise measurement routines with minimal disruption. For a certified measurement solution from Microtech Metrology and expert procurement support, contact Metav Werkzeuge: phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com — Metav consultants will advise on integration and delivery options Technical data Article number: 115050507 GTIN: 4061905041129 Manufacturer: Microtech Metrology Facts Measuring range: 0–50 mm Accuracy: 0.003 mm Display resolution: 0.0001 mm Measuring faces: Ø8 mm Measuring depth: 18 mm Special features Digital readout with integrated microcomputer Wireless + USB data output Delivered with ISO 17025 calibration certificate eClass: 21170328 ETIM: EC003590 FAQ Is the device supplied calibrated and with a certificate? Yes. The micrometer from Microtech Metrology is delivered fully calibrated and includes an ISO 17025 calibration certificate suitable for laboratory documentation. What data interfaces are available for integration? Readings can be exported via Wireless or USB; the digital output supports connection to standard inspection software and data loggers for automated documentation. What measurement range and contact geometry does it offer? Measurement is 0–50 mm with Ø8 mm measuring faces and a measuring depth of 18 mm, making it suitable for small to medium precision components. Can this instrument be used for in‑process checks on production lines? Yes. The combination of 0.003 mm accuracy, high display resolution and wireless/USB output makes it appropriate for regular in‑process verification and serial inspection tasks. Which industries are best served by this instrument? Applications include toolmaking, precision engineering, laboratory inspection and quality control where compact, traceable measurements up to 50 mm are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com