Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
6–8 mm Three-Point Internal Micrometer Color Touchscreen Wireless/USB ISO 17025 Cal Cert - Microtech Metrology
Compact digital measurement, precise repeatability and seamless data transfer are combined in this three‑point internal micrometer to speed up inspection tasks and reduce rework; the instrument is delivered fully calibrated to ISO 17025 with calibration certificate. Order the micrometer directly via Metav Werkzeuge or contact the consultants for specification advice. Three‑Point Internal Micrometer — Digital 6–8 mm, Colour 1.5" touchscreen, Microtech Metrology The Three‑Point Internal Micrometer is a compact digital instrument for precision internal diameter measurement in fine mechanical workshops and quality control. Three‑point internal measurement High‑resolution 0.004 mm accuracy Colour 1.5" touchscreen display Wireless + USB data output Precise results for small internal diameters This digital micrometer offers a measuring range 6–8 mm and an accuracy of 0.004 mm, delivering reliable results for small bores, precision bearings and micromechanical components. The three‑point measuring principle centres the contact points automatically, which reduces eccentricity and improves repeatability compared with two‑point probes. Delivered fully calibrated to ISO 17025, the device includes a calibration certificate, ensuring traceability and immediate use in regulated inspection routines. Faster documentation and integration into workflows Equipped with a Colour 1.5" touchscreen, the instrument allows clear reading of values and simple menu navigation, which shortens measurement cycles. Wireless and USB data outputs enable direct transfer to inspection software or SPC systems, eliminating manual transcription and reducing clerical errors. An adjustment ring is included for setting reference positions quickly; this practical combination supports efficient data capture and immediate logging in digital records. Designed for workshop reliability and specialised measurement tasks With a measuring depth 154 mm, this micrometer reaches recessed features while maintaining stable contact geometry. The compact form factor and robust electronics suit shop‑floor environments where speed and repeatability matter. Integration of modern digital interfaces makes the tool a pragmatic choice for CNC workshops, calibration labs and component suppliers seeking to upgrade internal measurement capability without complex retrofits. For tailored advice on specifications, delivery and integration of this Microtech Metrology three‑point internal micrometer contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will assist with selecting the right inspection solution and procurement details. Technical Data Article number: 133700810 GTIN: 4061905074189 Manufacturer: Microtech Metrology Core technical data Measuring range: 6.0–8.0 mm Measuring depth: 154 mm Accuracy: 0.004 mm Display: Colour 1.5" touchscreen Special features Digital measurement type Wireless and USB data output Adjustment ring included Delivered calibrated to ISO 17025 with certificate FAQ What is the measuring range of this instrument? The micrometer measures internal diameters from 6.0 to 8.0 mm and is intended for small precision bores. Is the micrometer delivered calibrated? Yes, the instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate. How are measurement results transferred to a PC or inspection system? Data can be exported via Wireless or USB connections for direct input into SPC or inspection software. What level of repeatability can be expected with three‑point measurement? The three‑point contact geometry improves centring and repeatability, supporting consistent readings at the stated 0.004 mm accuracy. Is an adjustment or reference ring supplied? An adjustment ring is included for quick setting of reference positions during repetitive inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
6–8mm Three-Point Internal Micrometer Self-Centring For Blind Holes In Plastic Case - Metav IndustryLine
Compact, self‑centring three‑point internal micrometre with a 6.0–8.0 mm measuring range and high mechanical resolution; the MS908.650 combines precise blind‑hole measurement with hardened measuring faces and a fine 0.001 mm reading—Order the three‑point internal micrometre directly via Metav Werkzeuge or ask our consultants if needed Three‑point internal micrometre MS908.650 — self‑centring, 6.0–8.0 mm range Three‑point internal micrometre MS908.650 delivers reliable blind‑hole measurement for precision workshops and production lines Self‑centring three‑point contact Measuring range 6.0–8.0 mm Resolution 0.001 mm reading Hardened measuring faces (HM) Precision where blind‑hole bores matter The self‑centring three‑point contact mechanism ensures coaxial alignment inside blind holes, reducing measurement variability compared with two‑point probes. With a measuring range of 6.0–8.0 mm and an analogue vernier controlled fine adjustment, this instrument is optimised for small‑diameter bores where repeatability is critical. The device’s geometry minimises radial play so that each measurement reflects the actual bore diameter rather than positioning error, which is particularly valuable in small‑component assembly and quality control workflows. Exceptional reading and repeatability for workshop standards Equipped with a mechanical reading division of 0.001 mm, the instrument offers a fine visual resolution while the stated accuracy of ±0.004 mm provides a clear performance expectation for routine inspections. The analogue vernier design gives tactile feedback during measurement, enabling experienced operators to control contact force intuitively. This combination of high resolution and guaranteed accuracy supports process control in machining and metrology tasks where small deviations can affect assembly fit or functional tolerances. Durable contact faces for industrial use The micrometre is fitted with hardened measuring faces (HM) to withstand repeated contact with workpiece surfaces and abrasive contaminants found in production environments. These robust faces preserve the geometry of the contact points over long service intervals, which reduces drift and the need for frequent re‑profiling. In practice, hardened faces extend usable life and maintain measurement integrity when inspecting ferrous and non‑ferrous components during serial production. Designed for blind‑hole measurement and simple handling Specifically configured for blind‑hole bores, the three‑point contact and compact body (length 54.5 mm) permit access to confined features that larger gauges cannot reach. The instrument includes an adjustment ring (setting ring 6) that allows controlled extension of the contact arms, making it suitable for varied hole depths within the stated range. Its compact, mechanically driven construction requires no batteries and integrates easily into inspection benches, making it a practical choice for laboratories and on‑shop measuring stations where robustness and low maintenance are priorities. Contact Metav Werkzeuge today to discuss how the MS908.650 can be integrated into existing inspection routines or to request tailored advice from our technical consultants Technical data Article number: MS908.650 Manufacturer: Metav IndustryLine Type: Three‑point internal micrometre Facts Measuring range: 6.0–8.0 mm Length: 54.5 mm Reading increment: 0.001 mm Accuracy: ±0.004 mm Adjustment ring: 6 Special features Self‑centring three‑point contact Hardened measuring faces (HM) Analogue vernier reading Suitable for blind‑hole bores Category: Messschrauben FAQ What measurement range does this instrument cover? The MS908.650 covers a measuring range of 6.0–8.0 mm, optimised for small blind‑hole bores. Is the device suitable for repetitive production checks? Yes, the MS908.650 is designed for workshop and production use with hardened measuring faces and a robust three‑point contact that supports repeatable inspections. What level of accuracy and resolution can be expected? The instrument provides a reading increment of 0.001 mm and a stated accuracy of ±0.004 mm, suitable for demanding quality control tasks. Can the micrometre measure deep blind holes? The compact length (54.5 mm) and the adjustment ring (6) make the MS908.650 appropriate for many blind‑hole depths within its 6.0–8.0 mm range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7-4.5 TPI Thread Insert 55° Whitworth Profile - Metav IndustryLine
Take advantage of the combination of precise standard conformity and straightforward compatibility to speed up thread inspection workflows. The combination of a defined 55° flank angle and a 7–4.5 TPI range supports efficient verification of Whitworth-form threads; order directly via Metav Werkzeuge or consult our specialists for application advice. Gewinde-Einsätze, 7 - 4,5 TPI, 55° – Thread inserts for Whitworth 55° A compact precision accessory, Gewinde‑Einsätze, 7 - 4,5 TPI, 55° serves as a dedicated insert for the verification and inspection of Whitworth‑form threads in measuring stations and test benches. Whitworth 55° flank angle standard Covers 7–4.5 TPI thread range Compact inspection insert, 0.1 kg Compatible with measuring equipment Reliable verification for Whitworth‑form threads The insert is engineered to match the Whitworth 55° thread form, which means the flank geometry is correct for a precise fit during tactile checking and comparative inspection. By providing a fixed reference geometry for the thread form, the component reduces interpretative error during routine checks and supports repeatable results. The defined 7–4.5 TPI range ensures applicability to common coarse Whitworth threads, enabling straightforward use in workshops and metrology labs that work to imperial thread specifications. This targeted compatibility streamlines inspection stages and shortens set‑up times on measuring fixtures. Practical benefits for inspection workflows As a small, purpose‑built accessory, the insert offers tangible efficiency gains: reduced adjustment cycles on thread gauges and a lower risk of misreading due to incorrect profile matching. Its light weight (approx. 0.1 kg) and compact form make it easy to house within a gauge set or to fit into modular measuring fixtures without requiring extensive modification. Designed for production and inspection environments, the insert supports faster decision cycles in quality control and contributes to higher throughput when batch checking threaded parts, while maintaining the precision expected in standards‑driven workflows. Traceability and integration into measuring systems Each item is identifiable by its SKU M309.098.8 and GTIN 4054469118390, which facilitates inventory management and traceability across quality documentation. The accessory integrates with existing measuring equipment intended for thread inspection and complements a structured inspection routine by providing a stable reference for comparative measurements. Where traceability and documentation matter, the clear identification supports quality records and audit trails, reinforcing reproducibility in serial testing and acceptance procedures. Contact Metav Werkzeuge to confirm suitability for specific Whitworth inspection rigs and secure these Metav IndustryLine thread inserts for consistent measurement results from Emmerich to the workshop floor Technical data SKU: M309.098.8 GTIN: 4054469118390 Weight: 0.1 kg Tariff code: 90173000 Facts Flank angle: 55° Threads per inch: 7–4.5 TPI Category: Accessories – measuring devices Recording index: Aufnahme 5 Special features Whitworth 55° thread form compatibility Compact insert for thread inspection Intended for use in metrology and quality control Manufacturer brand: Metav IndustryLine FAQ What thread form does this insert match? The insert matches the Whitworth thread form with a 55° flank angle, making it suitable for checks of Whitworth‑standard threads. Which thread pitches are covered by the insert? This accessory covers the 7–4.5 TPI range, which corresponds to the coarse Whitworth pitches commonly encountered in workshop and maintenance applications. Can this insert be used with existing thread gauge fixtures? Yes, the insert is designed as a compact inspection accessory for integration with measuring equipment and gauge fixtures used in thread verification. How is the product identified for ordering and traceability? The product is listed under SKU M309.098.8 and GTIN 4054469118390, facilitating ordering, stock management and documentation. Is the insert suitable for production or laboratory inspection? The insert is intended for metrology and quality control tasks; its stable profile supports repeatable comparative checks in both production and laboratory environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70-100mm Three-Point Inside Micrometer Color 1.5" Touchscreen, ISO 17025 Calibrated Wireless/USB - Microtech Metrology
Take advantage of the combination of industrial-grade accuracy, seamless digital data transfer and traceable calibration for dependable bore inspection workflows. Order this precision instrument through Metav Werkzeuge or consult Metav's specialists for specification support and delivery. Three-point internal micrometer — Microtech Metrology, Wireless + USB, 70–100 mm, 1.5″ colour touchscreen The Three-point internal micrometer is a precision instrument for internal diameter inspection and bore control in production and laboratory environments, covering a measuring range of 70–100 mm with digital readout and data connectivity. Wireless and USB data output 1.5″ colour touchscreen display High resolution 0.0001 mm reading ISO 17025 calibrated with certificate High-precision measurement that reduces rework and inspection time Equipped with a resolution of 0.0001 mm and an accuracy of ±0.004 mm, this three-point internal micrometer delivers consistent bore readings across its 70–100 mm span. The three-point contact geometry ensures stable centring inside bores, reducing measurement scatter compared with single-point probes. With a 250 mm measuring depth, the instrument reaches recessed features while maintaining measuring stability. These characteristics translate into fewer repeated measurements, faster acceptance decisions and lower scrap rates on production runs, supporting a measurable improvement in quality throughput. Integrated digital workflow for reliable data capture The instrument features a Colour 1.5″ touchscreen for clear numeric and status display and provides Wireless and USB outputs for direct transfer of measurement data into inspection software or SPC systems. An included adjustment ring allows quick in-field fine tuning before a measurement cycle, while the digital interface removes manual transcription errors that commonly delay reporting. Together, tactile setup and automated data export streamline inspection steps and facilitate traceable records for batch release and quality documentation. Traceable calibration and industrial readiness Delivered fully calibrated to ISO 17025 standards, the micrometer includes a calibration certificate for immediate use in accredited quality processes. Manufactured by Microtech Metrology, the instrument combines laboratory-grade measurement control with rugged build quality suitable for workshop and production environments. The combination of traceable calibration, durable construction and digital connectivity supports compliance demands and long-term process stability, making the device a practical component of structured quality management and audit preparedness. For procurement advice or to request the ISO 17025 certificate and delivery options from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich for tailored supply and logistic support. Technical data Article number: 133710010 GTIN: 4061905074288 Manufacturer: Microtech Metrology ECLASS: 21170335 ETIM: EC003590 Facts Measuring range: 70–100 mm Measuring depth: 250 mm Accuracy: ±0.004 mm Resolution (reading): 0.0001 mm Special features Digital instrument: yes Display: Colour 1.5" touchscreen Data output: Wireless, USB Adjustment ring included ISO 17025 calibration and certificate included FAQ Is this instrument delivered calibrated? The instrument is supplied fully calibrated to ISO 17025 standards and includes the calibration certificate with the Three-point internal micrometer from Microtech Metrology (SKU 133710010). How can measurement data be exported for quality records? Measurement values are exported via Wireless or USB interfaces; the Colour 1.5″ touchscreen provides on-instrument confirmation before transfer to inspection software or SPC systems. What bores and components is this micrometer suited to inspect? The three-point contact geometry and 70–100 mm measuring range are intended for medium-sized bores such as bearing seats, hydraulic components and precision housings where repeatable inner-diameter control is required. What depth of recessed features can be measured? The instrument supports measurements to a depth of 250 mm, enabling checks of deeper recesses and stepped bores where reach is required. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70-80mm Three-Point Inside Micrometer Self-Centering, Analog 0.005mm Resolution, Supplied in Case - Metav IndustryLine
Take advantage of the self‑centring three‑point measuring head, the ±0.006 mm accuracy and the compact 70–80 mm range to ensure repeatable internal measurements in inspection and workshop settings; order the three‑point internal micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Three‑point internal micrometer M836.716 — self‑centring, 70–80 mm range (Metav IndustryLine) The three‑point internal micrometer is a precision measuring instrument for accurate internal diameter measurement of bores and cavities in workshop and inspection environments. Self‑centring three‑point measuring head Range 70–80 mm for internal diameters Reading 0.005 mm, accuracy ±0.006 mm Supplied in protective case Precision that reduces rework and inspection uncertainty The three‑point geometry combines simultaneous contact at three opposing points to centre the spindle automatically, offering a self‑centring effect that reduces eccentricity and alignment errors. With a reading of 0.005 mm and a stated accuracy of ±0.006 mm, the instrument delivers the reproducible results required for quality control tasks where small deviations matter. The compact measurement span of 70–80 mm makes this tool well suited to medium‑sized bores commonly encountered in component inspection, while the mechanical design prioritises stable contact and low hysteresis to keep measurement scatter to a minimum. Built for reliable handling and workshop durability The construction includes hardened measuring faces, which protect contact areas against abrasive wear and preserve measurement integrity over extended use. The mechanical, analogue display gives a tactile, immediate readout that experienced technicians can interpret without dependence on electronics, simplifying routine checks at the bench. Supplied in a protective case for safe transport and storage, the instrument is prepared for rougher workshop environments and controlled transport to inspection stations, reducing the risk of damage between uses and maintaining calibration stability. Practical value across production and inspection Designed as a workshop‑grade inspection tool, the micrometer supports process control by delivering consistent internal diameter checks that help to identify trends before parts leave production. The self‑centring action shortens set‑up time and decreases operator influence on the result, which contributes to fewer measurement‑related rework cycles and more reliable batch acceptance. Where repeatability and straightforward operation are priorities, this three‑point internal micrometer is an effective choice for assembly, machining and maintenance teams who require a robust, repeatable measuring method. Contact Metav Werkzeuge for tailored technical advice and to arrange procurement of this Metav IndustryLine three‑point internal micrometer for your inspection bench Technical Data SKU: M836.716 GTIN: 4061905040702 ECLASS: 21170335 ETIM: EC003590 Brand: Metav IndustryLine Numerical data Measurement range: 70–80 mm Reading (resolution): 0.005 mm Accuracy: ±0.006 mm Analog mechanical instrument Design & features Self‑centring three‑point measuring head Hardened measuring faces Supplied in protective case (plastic or wooden) Category: Three‑point internal micrometer FAQ What measurement range does the instrument cover? The measurement range is 70–80 mm and is suitable for medium‑sized internal diameters; refer to SKU M836.716 for ordering. What resolution and accuracy can be expected? The device provides a reading resolution of 0.005 mm with an accuracy specified as ±0.006 mm for reliable shop‑floor control. How does the self‑centring function improve results? The self‑centring three‑point contact automatically centres inside the bore, reducing eccentricity and operator alignment error for more repeatable measurements. Are the measuring faces durable for daily workshop use? Yes; the micrometer is fitted with hardened measuring faces to resist wear during routine inspection work and to preserve measurement consistency. Is this instrument suitable for inspection and production checks? The unit is designed for workshop and inspection roles where medium range internal diameter checks and repeatable results are required; it is a practical choice for machining, assembly and maintenance tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
700-800mm Digital Outside Micrometer With 25mm Anvils, IP65, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of its combination of ISO 17025 traceability, IP65 protection and a 700–800 mm measuring range delivers reproducible, workshop-ready results for large components; order this instrument directly via Metav Werkzeuge or consult our specialists for application advice. Large-range digital outside micrometer (700–800 mm) — Microtech Metrology, digital, IP65 The large-range digital outside micrometer (700–800 mm) is a heavy‑duty, workshop-capable instrument for precise external measurements of large assemblies in heavy machining, fixture manufacture and pipe or vessel work. ISO 17025 calibration certificate included IP65-protected digital readout 0.001 mm resolution for fine readings Ø25 mm measuring faces for stability Friction ratchet for repeatable force Reliable accuracy for quality control in production Equipped with a 0.001 mm display resolution and an achieved accuracy of ±0.015 mm, this instrument brings measurable certainty to routine inspections and first-article checks. The supplied ISO 17025 calibration certificate ensures traceable results, making the device suitable for documented quality procedures and audit trails. By reducing measurement uncertainty, the micrometer supports lower scrap rates and fewer repeat operations, which benefits process stability and cost control. Built to withstand workshop conditions and give repeatable results The digital micrometer head is sealed to IP65, protecting the electronics against jets of coolant and ingress of machining swarf, while the Ø25 mm measuring faces distribute contact force for stable readings on large diameters. The integrated friction ratchet guarantees a consistent measuring force, avoiding variability caused by manual over‑torque and ensuring repeatable measurements across operators. Robust construction and a deliberate mass (approx. 4.8 kg) make the tool dimensionally stable during use. Optimised range and handling for larger workpieces Designed as a large-range instrument within the 500–1,000 mm category, the 700–800 mm span addresses parts that exceed conventional bench micrometer limits yet remain manageable for single‑person handling. Included setting rods simplify zeroing and verification across the measuring span, so set-up time is reduced and throughput improves. The digital readout accelerates measurement cycles compared with manual scales, supporting faster inspection routines in production environments. Traceability and manufacturer quality for demanding tasks Delivered fully calibrated to ISO 17025, the instrument arrives with a calibration certificate suitable for official records and quality documentation; calibration was performed under recognised accreditation (Ilac MRA). The combination of a sealed digital head, precise resolution and documented calibration makes this device a dependable metrology tool for inspection labs and industrial workshops alike, adding confidence when measurements feed production decisions or supplier acceptance. Contact Metav Werkzeuge for delivery and expert guidance on Microtech Metrology large-range digital micrometers — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 110178001 GTIN: 4061905040245 Manufacturer: Microtech Metrology Numeric specifications Measuring range: 700–800 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Measuring faces diameter: Ø25 mm Weight: 4.8 kg Protection class: IP65 Special features Digital readout ISO 17025 calibration certificate included Friction ratchet Setting rods included Wide-range micrometer head FAQ What measurement range does this micrometer cover? The large-range digital outside micrometer covers a 700–800 mm span and is intended for large external measurements common in heavy machining. Is the micrometer delivered calibrated and with traceability? Yes—the instrument from Microtech Metrology is supplied with an ISO 17025 calibration certificate, providing traceability for quality documentation. Can this micrometer be used in a machine shop environment with coolant and chips? The digital head is rated IP65, so the micrometer is protected against jets of coolant and ingress of debris typical in a machine shop. What ensures consistent measuring force during repeated checks? A built-in friction ratchet provides a repeatable measuring force so that readings remain consistent between different operators and measurement cycles. Which contact diameter is recommended for stable measurements on large parts? This instrument features Ø25 mm measuring faces, which help distribute contact pressure and improve stability when measuring large diameters. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
700-800mm Micrometer With Wide Range, Colour Touchscreen, Wireless/USB Data Output, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high reproducibility across a 700–800 mm measuring span together with ISO 17025 calibration and integrated wireless data transfer for uninterrupted production control; order the calibrated instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Micrometer (outside) 700–800 mm — Digital micrometer with 1.5" colour touchscreen (Microtech Metrology) A micrometer designed for long-range external measurements in heavy-duty workshop and metrology environments, offering digital readout and industrial connectivity for efficient quality workflows Large measuring range 700–800 mm ISO 17025 calibration certificate included Colour 1.5" touchscreen display Wireless and USB data transfer Precision across large components for reliable production The instrument combines a 700–800 mm measuring span with a measured accuracy of ±0.008 mm, making it suitable where repeatable external measurements over long distances are required. Classified in the large-range category, this device bridges the gap between portable gauges and specialised long-bed measuring systems: the construction prioritises profile stiffness to maintain reproducibility along the full span. The Ø25 mm measuring faces distribute contact force to reduce local deformation, and the specified reading resolution of 0.0001 mm ensures fine differentiation of results that supports process tolerances and reduces rework. Seamless data flow for Industry 4.0-enabled inspection Connectivity is a central benefit: native wireless transmission and USB HID modes allow direct integration with inspection software and PLCs, while the proprietary MICS system and wireless MICROTECH instrument connection provide synchronization, 2D graphing and probe modes for advanced analyses. Onboard memory for 2000 values and folder-based management simplifies batch handling and statistical review before transfer. For industrial networks, optional MODBUS RTU (RS‑485) output is available, enabling deterministic links to factory automation and avoiding manual transcription errors that slow production. Robust build and traceable calibration for trustworthy results A CNC machined aluminium housing protects the measuring mechanism and provides thermal stability; the unit’s mass (approx. 4.8 kg) gives a steady feel during measurement. Calibration is delivered as a full ISO 17025 certificate (Ilac MRA), confirming traceability and suitability for regulated environments and audits. The instrument is therefore supplied ready for immediate use in quality control routines and is appropriate for contract measurement where documented evidence of accuracy is required. Practical advantages on the shop floor The large-format digital display (1.5" colour touchscreen) and clear menu reduce operator interpretation time and support faster inspection cycles. Digital functions such as zeroing, linear and temperature correction, max/min capture and Go/NoGo tests convert raw measurements into actionable decisions on the shop floor. Where higher throughput is demanded, automatic data transfer and the device’s memory manager cut administrative overhead and increase effective throughput of inspection tasks. Contact Metav Werkzeuge today for tailored advice on integrating this Microtech Metrology micrometer into production and to secure a fully calibrated instrument delivered from Emmerich with certification and industrial connectivity. Technical data Article number: 110188008 GTIN: 4061905039676 Manufacturer: Microtech Metrology Type: Micrometer (outside) Display: Colour 1.5" touchscreen Data output: Wireless + USB Calibration: ISO 17025 certificate included Facts Measuring range: 700–800 mm Resolution (reading): 0.0001 mm Accuracy: ±0.008 mm Measuring face diameter: Ø25 mm Weight: 4.8 kg Memory capacity: 2000 values Special features CNC machined aluminium housing Wireless MICROTECH instrument connection and synchronization MICS system with 2D graph, probe mode and compensation Data transfer modes: Wireless HID, Wireless HID+MAC, USB HID Optional MODBUS RTU (RS‑485) for industrial connection Calibration certificate ISO 17025 (Ilac MRA) included FAQ How is the accuracy of this micrometer verified? The micrometer is supplied with a full ISO 17025 calibration certificate (Ilac MRA), confirming traceable verification of the specified ±0.008 mm accuracy. Can measurement data be exported to inspection software? Yes — the device supports wireless transfer, USB HID modes and has four data-transfer options plus an optional MODBUS RTU interface for direct integration with inspection and automation systems. Is the instrument suitable for heavy workshop use? The CNC machined aluminium housing and the device mass deliver robustness for workshop environments while maintaining thermal stability for consistent measurements. What is the memory capacity and how are values organised? Onboard memory stores up to 2000 values in a folder system with statistics mode, facilitating batch handling prior to data transfer. Which contact surfaces are used for measurement and why? The instrument uses measuring faces with Ø25 mm diameter to spread contact load, reducing local deformation and improving repeatability on larger workpieces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
7000-8000 mm Bench Micrometer Modular Digital Touchscreen, IP65, ISO17025 Calibrated - Microtech Metrology
The product data cannot be processed into a reliable description because key technical details are contradictory. A numeric accuracy entry of 0.12 appears alongside a manufacturer narrative that explicitly describes a sub‑micron instrument with a computerized MICS system and Industry‑4.0 capabilities; both statements cannot be reconciled without clarification of units and measurement context. In addition, the specification lists an unusually large measuring range (7–8 m) for this instrument class, which makes precise interpretation of the accuracy and resolution even more critical. Please confirm the following before a full product text can be produced: Whether the accuracy value is 0.12 mm, 0.12 µm (0.00012 mm) or another unit Whether the device truly offers sub‑micron resolution and, if so, the corresponding resolution and error limits Confirmation of the intended measuring range and any applicable environmental or mounting conditions that affect stated accuracy Once these points are clarified, a complete, specification‑accurate product description will be provided. For assistance or to supply corrected data, please contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930.
725mm Setting Gauge For Micrometers With Thermal Shield, Accuracy ±8µm - Metav IndustryLine
Take advantage of a stable reference standard that combines long-range capacity, tight ±0.008 mm accuracy and integrated thermal protection to keep micrometre settings reproducible across shifts. Order the setting gauge directly via Metav Werkzeuge or contact the Metav consultants for application advice. Metav IndustryLine Setting gauge for micrometres, 725 mm, ±0.008 mm Metav IndustryLine Setting gauge for micrometres is a workshop reference tool for setting outside micrometres and checking long-range measuring chains 725 mm master gauge for micrometres ±0.008 mm accuracy Thermal protection for stable readings Ball measuring faces, 16 mm diameter Precision that shortens setup and inspection cycles The setting gauge serves as a stable reference for adjusting outside micrometres and for verifying measuring processes. With a specified accuracy of ±0.008 mm, the gauge provides a repeatable reference that reduces time spent on trial adjustments and iterative checks. The short-term benefit is faster machine setups and fewer scrapped parts; the mid-term benefit is a more predictable quality flow in production. The ball-shaped measuring faces concentrate contact forces on a defined contact geometry, which is advantageous when aligning micrometre anvils or checking small contact points. This reduces ambiguity in the comparison measurement and supports consistent pass/fail decisions during routine checks. Built for long-range use with thermal stability in mind Rated at 725 mm nominal length, this gauge falls into the class of long-bar reference standards commonly used where extended reach is required but a rigid profile is still needed. The integrated thermal protection lowers the influence of ambient temperature fluctuations, helping to keep dimensional drift within narrow bounds during typical workshop cycles. At approximately 1.2 kg, the tool balances handling ease with sufficient mass to sit stably during comparison tasks. The 16 mm contact diameter ensures compatibility with a wide range of outside micrometre anvils while offering a robust contact area that tolerates frequent use without rapid wear. Practical handling that supports everyday metrology routines The design focuses on integration into existing workshop procedures: the gauge is compact enough to be moved between benches yet long enough to span long components or multiple tool checks. The clear, unambiguous reference value streamlines calibration loops and reduces decision latency on the shop floor, contributing to overall throughput. Ball measuring faces and a defined contact diameter simplify the mechanical alignment of measuring instruments, while the moderate mass assists in keeping the gauge steady during comparison. For traceable procurement and inventory control, the item is listed with a GTIN and an unambiguous article identifier to fit into goods-receipt processes and asset lists. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine 725 mm setting gauge into inspection routines and to discuss suitable handling or storage options Technical data Article number: M304.321.1 GTIN: 4054469116792 Nominal length: 725 mm Weight: 1.2 kg Facts Accuracy: ±0.008 mm Measuring face diameter: 16 mm Customs tariff: 90173000 Special features Thermal protection Ball-shaped measuring faces Category: Accessories for measuring instruments Intended use: setting outside micrometres Brand: Metav IndustryLine FAQ Is this gauge suitable for setting outside micrometres? Yes. The Metav IndustryLine setting gauge for micrometres (SKU M304.321.1) is designed specifically as a reference for adjusting outside micrometres and for routine comparison checks. What accuracy can be expected during routine use? The product specification lists an accuracy of ±0.008 mm, which supports reproducible micrometre adjustments and reliable pass/fail evaluations on the shop floor. How does the thermal protection affect measurements? Thermal protection reduces the effect of ambient temperature changes on the 725 mm reference length, helping to maintain dimensional stability during typical inspection cycles. What is the function of the 16 mm ball measuring faces? The 16 mm ball-shaped measuring faces provide a defined contact geometry that eases alignment with micrometre anvils and concentrates contact force for repeatable comparisons. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75 mm Digital Micrometer 0.001 mm Resolution Auto-Off, IP65, Supplied in Case - Metav IndustryLine
Take advantage of the combination of ultra‑fine 0.001 mm reading, robust IP65 protection and a ratcheted thimble for consistent measuring force to keep production tolerances tight and rework to a minimum. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Micrometer M302.246.N – 50–75 mm range, 0.001 mm resolution (Metav IndustryLine) A Digital Micrometer M302.246.N designed for precise external measurements in fine mechanical and general workshop applications Resolution 0.001 mm IP65 dust and splash protection Ratcheted thimble for consistent force Supplied in protective case Reduce scrap with micrometre-grade resolution The instrument delivers a 0.001 mm display step, enabling reliable distinction between parts that would otherwise fall within the same tolerance band. This level of detail supports faster quality decisions and fewer rejected components, which leads to measurable savings in downstream rework. The measuring faces have a 6.5 mm diameter, providing a stable contact area that improves repeatability when checking shafts, pins and small turned parts. Conformance to DIN 863 underpins the measurement practice and clarifies the expected performance in a production environment. Built to withstand workshop conditions With an IP65 rating and a matt‑chrome measuring drum, the micrometer resists dust and cleaning fluids commonly found in machining and assembly areas. The lacquered frame offers corrosion resistance and a tactile surface for secure handling. The ratcheted thimble ensures a reproducible contact force, reducing operator‑induced variation during routine checks. Supplied in a protective case, the instrument remains transport‑ready and protected between measuring jobs, making it suitable for on‑bench and mobile inspection tasks. Ergonomics and workflow efficiency for repeat inspections The digital readout shows measurements only in millimetres and features automatic switch‑off to conserve battery life, simplifying operation for workshop teams who perform frequent checks. The compact format and the product’s classification within the Mikro range (compact instruments for the 10–100 mm sector) make it particularly useful for precision work on small assemblies, watch components and intricate fittings. Combining repeatable contact force with an easy‑to‑read display accelerates inspection cycles without sacrificing confidence in the result. For reliable, workshop-ready micrometrology from Metav IndustryLine, request the Digital Micrometer M302.246.N via Metav Werkzeuge or contact our application specialists at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M302.246.N GTIN: 4054469115436 Category: Messschrauben Brand: Metav IndustryLine Standard: DIN 863 Facts Measuring range: 50–75 mm Resolution: 0.001 mm Measuring faces: 6.5 mm Display units: mm (digital) Protection class: IP65 Special features Frame lacquered; measuring drum matt chrome‑plated Digital display with automatic switch‑off Ratcheted thimble for repeatable measuring force Supplied in protective case Classification: Mikro (compact range 10–100 mm) FAQ What resolution and accuracy does the micrometer provide? The Digital Micrometer M302.246.N offers a 0.001 mm resolution and is specified to workshop standards under DIN 863, making it suitable for fine measurement tasks and stringent quality checks. Is the instrument suitable for use at the machine or on-site in the workshop? Yes. The Metav IndustryLine micrometer is IP65 rated and comes with a protective case; the combination of environmental protection and a ratcheted thimble supports reliable use beside machines and on the shop floor. Can the micrometer be used for very small precision parts such as watch components? The device is classified in the Mikro range (compact 10–100 mm instruments) and, with its fine measuring faces and high resolution, is well suited to precision tasks on small components and micro‑mechanical assemblies. Which display units are available and does the display conserve battery? The micrometer displays measurements in millimetres only and includes an automatic power‑off function to extend battery life during intermittent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75 mm Internal Setting Gauge With Lapped Measuring Faces, 0.18 kg - Metav IndustryLine
Take advantage of the combination of finely lapped measuring faces, compact 75 mm nominal length and high measuring stability for reliable reference measurements in precision workshops; order via Metav Werkzeuge or consult the technical team for application advice. Setting gauge for internal measurement M311.082 — 75 mm, finely lapped faces (Metav IndustryLine) A Setting gauge for internal measurement M311.082 that serves as a compact calibration standard for internal measuring instruments in metrology labs and precision workshops. Finely lapped measuring faces for reproducible contact Nominal length 75 mm for micro‑range calibration High reference stability with low thermal mass Calibration‑grade tolerance 0.003 mm Consistent reference accuracy for internal measurements The gauge provides a stable reference surface thanks to its finely lapped measuring faces, ensuring repeatable contact geometry for two‑point internal measuring devices. With a stated tolerance of 0.003 mm, this standard reduces measurement scatter and supports precise zeroing and verification of internal micrometers and similar instruments. The specified accuracy translates into reliable comparative checks in quality control, shortening inspection cycles by limiting rework caused by uncertain references. Compact size tuned to fine mechanics and bench work With a nominal length of 75 mm, this gauge falls into the micro range for compact measuring standards (suitable for applications that require extreme precision on small parts). The reduced span keeps the gauge stiff and easy to handle: ideal for watchmaking, small‑component inspection and any setting tasks where instrument stability and minimal operator influence are essential. The resulting combination of reach and rigidity offers a practical balance between accessibility and measurement fidelity in everyday workshop use. Designed for integration into calibration routines Delivered as a purpose‑made accessory, the gauge functions as a straightforward calibration standard for internal measuring instruments and aids reproducible setup procedures on the shop floor. Its manageable mass and surface quality simplify handling and cleaning while maintaining contact integrity. When used as part of a documented calibration workflow, the gauge helps to demonstrate traceability and repeatability in routine inspections — supporting process reliability across production and repair environments. For procurement or application support for this Metav IndustryLine setting gauge, contact Metav Werkzeuge for precise advice and delivery options: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M311.082 GTIN: 4054469119199 Category: Accessories eClass: 21170102 Customs tariff: 90173000 Facts Nominal length: 75 mm Tolerance / accuracy: 0.003 mm Weight (as labelled): 0.18 kg Special features Finely lapped measuring faces Reference standard for internal measurement instruments Compact micro‑range design for fine mechanic tasks Asset image available (product photograph) FAQ What is the intended use of this setting gauge? The setting gauge M311.082 is intended as a compact reference standard for the calibration and setting of internal measuring instruments and internal micrometers. What level of accuracy does the gauge offer? The gauge is specified with a tolerance of 0.003 mm, making it suitable for high‑precision comparative checks in laboratory and workshop environments. Is the gauge suitable for daily workshop handling? Yes, the micro‑range format and low thermal mass make the gauge practical for repeat use at the workbench while maintaining stability and reproducibility. How should the gauge be cleaned and stored? Clean the measuring faces with a lint‑free cloth and suitable solvent; store in a dry, protected container to preserve the lapped surfaces and prevent corrosion. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75 mm Universal Measurement Stand With Digital Built-In Micrometer 0.001 mm Resolution, Granite Base - Metav IndustryLine
Take advantage of the combination of a thermally stable granit plate, a digital built-in micrometer with 0.001 mm resolution and modular measuring inserts for consistent, repeatable inspection results; order directly via Metav Werkzeuge or consult the Metav team for application advice. Universal measuring stand M504.131 — measuring stand with digital built-in micrometer and granite base (Metav IndustryLine) Universal measuring stand M504.131 for precise micrometre measurements on a stable granite base, suited to workshop and laboratory inspection tasks Granite base for thermal stability Built-in digital micrometer, 0.001 mm resolution Data interface RB 4.1 for traceable output Includes 7 pairs of measuring inserts Measurement stability for reproducible results A stable measuring foundation is the basis of repeatable precision. The granite plate reduces thermal drift and offers high stiffness, so dimensional checks remain consistent over longer inspection runs. The integrated digital micrometer provides a fine 0.001 mm reading, enabling sub-micron comparison steps where mechanical vernier resolution would be insufficient. This combination supports reliable pass/fail decisions in routine quality control and short-series production without frequent readjustment. Secure data handling and straightforward readout Equipped with a digital display including ON/OFF and ABS/INC functions, the system simplifies zeroing and relative measurement workflows. The unit provides a RB 4.1 data output for direct capture of measured values into inspection protocols or SPC systems, supporting traceability and documentation. The design prioritises clear numeric results and a minimal learning curve for operators, so measurement data can be archived or analysed with standard metrology software. Adaptable inspection set for diverse geometries The fixture is supplied with 7 pairs of measuring inserts, covering common profiles for external and internal checks; additional inserts for thread and gear measurement are available as options. The modular approach lets the stand be adapted quickly to different tasks, reducing setup time between components. With the segmented measuring range (0–25 mm per setting and a total span to 0–75 mm) the system suits both small parts and stepped measurements without compromising on stiffness. Practical integration into workshop and lab routines Built to complement established metrology benches, the unit supports routine incoming inspection, final checks and small-batch process control. The compact footprint of the measuring assembly preserves bench space, while the robust construction withstands frequent handling. For organisations seeking a dependable standard for micrometre-based checks, the result is improved measurement consistency and clearer quality decisions, backed by Metav IndustryLine’s distribution and advisory capability. Contact Metav Werkzeuge for tailored application support and to discuss how the Metav IndustryLine measuring stand with built-in digital micrometer can be integrated into existing inspection workflows Technical data Article number: M504.131 GTIN: 4054469145631 Tariff number: 90173000 Facts Measuring range: 0–25 mm (total measuring range 0–75 mm) Resolution: 0.001 mm Data output: RB 4.1 Display: ON/OFF and ABS/INC Special features Granite plate for dimensional and thermal stability Built-in digital micrometer for fine readings Supplied with 7 pairs of measuring inserts Optional inserts available for thread and gear measurement FAQ What measuring accuracy can be expected from this system? The M504.131 universal measuring stand delivers readings to 0.001 mm resolution via its digital micrometer; this supports high-precision comparative measurements typical in workshop and lab inspections. Is the measuring range sufficient for small and medium components? Yes, the system offers a segmented range of 0–25 mm per setting with a total span to 0–75 mm, allowing checks on small parts and stepped features without changing the fixture. Can measurement results be exported to quality software? The stand is equipped with a RB 4.1 data interface, enabling direct transfer of measured values into inspection protocols and SPC tools for traceability. What accessories are included for different geometries? Delivery includes 7 pairs of measuring inserts for common external and internal checks; specialised inserts for thread and gear measurement are available separately. Is the stand suited to production environments? The granite base and robust construction make it well suited to regular inspection tasks in workshop and production settings, providing stable and repeatable measurement references. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Digital Dial Micrometer With Flat Anvils 0.001 mm Resolution, Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.001 mm resolution, a generous 75–100 mm measuring range and data output (RB 4.1) for seamless process documentation; order the Digital Anvil Micrometer M302.253.C directly via Metav Werkzeuge or ask our consultants for application advice. Digital Anvil Micrometer M302.253.C — 75–100 mm, 0.001 mm resolution (Metav IndustryLine) The Digital Anvil Micrometer M302.253.C is a workshop-grade, digital external micrometer designed for precise diameter and thickness checks in production and quality control environments 0.001 mm resolution for fine measurements Data output RB 4.1 for digital logging Ratchet stop for constant measuring force Non-rotating spindle reduces measurement error Precision where it matters The instrument delivers a resolution of 0.001 mm combined with an accuracy of ±0.005 mm, which places it in the precision category required for component inspection and repeatable workshop measurement tasks. The digital display includes ON/OFF, ABS/INC, UNIT and SET controls for straightforward switching between incremental and absolute modes, while the non-rotating spindle ensures alignment stability during contact. These features together reduce operator influence and increase throughput in routine checks and small-batch production. Efficient data capture for quality systems Equipped with RB 4.1 data output, the micrometer integrates with digital logging systems to record measurement results directly into inspection software or SPC workflows. The presence of a ratchet stop standardises the applied measuring force, improving reproducibility between operators. The painted frame and matte chrome-plated measuring drum combine mechanical robustness with a tactile control surface, allowing reliable operation at the workbench and simple hand-held use while maintaining instrumental consistency. Robust design for daily industrial use Constructed with a durable painted frame and a matt-chromed measuring drum, the instrument is engineered for everyday use in workshop and production settings. With a measuring range of 75–100 mm and a mass of approximately 1.3 kg, the micrometer balances rigidity and handling comfort for larger external measurements. The non-rotating spindle minimises angular error on tapered or thin-walled parts, and the solid build reduces susceptibility to misalignment during repetitive cycles. For integration advice, compatibility checks with existing inspection software or ordering assistance, contact Metav Werkzeuge — the Metav IndustryLine micrometer is recommended where documented, high-resolution external measurements are required Technical Data Article number: M302.253.C GTIN: 4054469115528 eClass: 21170328 ETIM: EC003590 Tariff code: 90173000 Facts Measuring range: 75 mm – 100 mm Resolution: 0.001 mm (0.00005 in) Accuracy: ±0.005 mm Weight: 1.3 kg Special features Frame painted and measuring drum matt chrome-plated Digital display with ON/OFF, ABS/INC, UNIT and SET buttons Data output: RB 4.1 Non-rotating spindle Ratchet stop Category: Micrometers / Messschrauben FAQ What level of accuracy can be expected from this micrometer? The Digital Anvil Micrometer M302.253.C specifies an accuracy of ±0.005 mm and a resolution of 0.001 mm, suitable for routine workshop inspection and quality-control tasks. How does the RB 4.1 data output assist in production? RB 4.1 provides a direct digital interface for the micrometer so measurement values from the M302.253.C can be logged automatically into inspection software or SPC systems for traceable records. Why is the ratchet stop beneficial? The ratchet stop on the M302.253.C ensures a uniform measuring force on each reading, improving repeatability when multiple operators perform the same measurement. Does the non-rotating spindle improve results on thin parts? Yes, the non-rotating spindle reduces twisting at the contact face, which helps avoid angular displacement on thin or tapered components and thus reduces measurement error. Is the micrometer suitable for production benches rather than fine lab use? The combination of robust finishing, practical controls and data output makes the M302.253.C well suited to production and workshop environments where documented, repeatable external measurements are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Digital Micrometer 0.001 mm Resolution Auto-Off, IP65, Ratchet, Satin-Chrome Measuring Spindles, Case - Metav IndustryLine
Take advantage of high-resolution measurement and robust protection for reliable workshop results; the combination of a 0.001 mm readout, IP65 ingress protection and a ratchet thimble ensures consistent, repeatable micrometre readings—order via Metav Werkzeuge or consult the Metav team for technical advice. Digital Micrometer M302.247.N — 0.001 mm digital readout, IP65 protection The Digital Micrometer M302.247.N is a workshop-grade, digitally read micrometre designed for precise external measurements in metalworking and quality control, covering the 75–100 mm measuring range with a ratchet thimble for reproducible contact force. High-resolution 0.001 mm readout IP65 dust and water protection Ratchet thimble for consistent force Conforms to DIN 863 Precision that speeds inspection and reduces rework The central advantage is the 0.001 mm resolution combined with a clear digital display, which allows faster, error‑reduced readings compared with analogue gauges. In daily quality checks this resolution supports tight tolerances and shortens inspection cycles, saving production time. The thimble with integrated ratchet maintains a constant measuring force to avoid operator-induced deviations, so measurements are more reproducible and traceable within routine workshop workflows. Built to withstand workshop conditions With an IP65 rating and a robust frame (painted body with a matt‑chromed measuring drum), this instrument tolerates coolant mist and fine dust common at machine benches. The protection rating reduces the risk of downtime from contaminant ingress, making the micrometre suitable for on‑shop applications where reliability matters. The compact measuring faces (Ø 6.5 mm) reach into small features while the overall construction balances stiffness and handling for everyday use. Practical handling and clear data The display is configured only in millimetres and includes an auto‑off function to preserve battery life during intermittent use. The 75–100 mm range is ideal for medium-sized components and fixtures found in general machining and toolroom contexts. The instrument’s ergonomics, combined with the ratchet, support single‑hand operation and reduce fatigue across repeated measurements. Where a visible, unambiguous readout is required, the digital format reduces transcription errors and simplifies quality documentation. Compliance and delivery features that matter Manufactured to the established workshop standard (DIN 863), this micrometre meets conventional accuracy expectations for industrial measuring tools. The unit is supplied in a protective case for secure transport and storage, helping to preserve calibration and mechanical condition between uses. The combination of workshop‑grade protection, clear digital readout and practical mechanical controls provides a balanced tool for production, inspection and maintenance tasks. Choose the Metav IndustryLine digital micrometre M302.247.N for IP65‑protected precision and contact Metav Werkzeuge for ordering or detailed product guidance Technical data SKU: M302.247.N GTIN: 4054469115443 Tariff number: 90173000 Standard: DIN 863 Core data Measuring range: 75–100 mm Resolution: 0.001 mm Measuring faces: Ø 6.5 mm IP rating: IP65 Display: mm only (digital) Special features Auto‑off digital display Ratchet thimble for consistent measuring force Frame painted, measuring drum matt chrome‑plated Delivered in protective case FAQ What is the accuracy and resolution of this micrometre? The M302.247.N offers a resolution of 0.001 mm; accuracy is aligned with the DIN 863 workshop standard and the digital readout reduces reading uncertainty. Is the micrometre suitable for use in a misty or oily environment? Yes. The device is rated IP65, providing protection against dust ingress and low‑pressure water jets, which suits many shopfloor environments. How does the ratchet thimble improve measurement consistency? The ratchet thimble on this micrometre limits the applied measuring force, ensuring repeatable contact pressure and therefore more reproducible readings with the Digital Micrometer M302.247.N. Can the display show inches as well as millimetres? The digital display is configured only in millimetres, matching common workshop standards and documentation practices for metric measurements. Is the instrument delivered ready to use and protected for transport? The micrometre is supplied in a protective case to secure the instrument during transport and storage, helping to maintain measurement integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Digital Micrometer 0.001 mm Resolution, IP65, Ratchet, Plastic Case - Metav IndustryLine
Take advantage of precise 0.001 mm readings combined with a robust IP65 protection class and a ratchet thimble for consistent measuring force. Order the instrument directly via Metav Werkzeuge or consult our advisors for integration and technical data. Digital micrometer 75–100 mm — Metav IndustryLine, IP65, 0.001 mm resolution The Digital micrometer 75–100 mm delivers shop-floor accuracy for measuring medium-sized components and is designed for reliable daily use in production and inspection. IP65 dust and splash protection 0.001 mm resolution display Ratchet thimble for consistent force Four-button measurement functions Consistent accuracy for production control A resolution of 0.001 mm ensures that critical tolerances are reliably detected during routine checks and final inspections. The combination of a ratchet thimble and the electronic ABS function reduces operator influence on results, converting manual measurements into repeatable data. The instrument meets DIN 863 conventions for micrometers, supporting standardised procedures on the shop floor. Data integration is facilitated by the RB4 output and a clear digital readout that offers ON/zero, mm/inch switching and HOLD – practical when documenting measurements or feeding values into quality-control systems. Built to withstand the workshop environment With an IP65 rating the device tolerates dust ingress and water jets, so it can be used reliably in machining cells and near coolants without immediate risk of malfunction. The measuring faces are supplied as carbide measuring faces (6.5 mm), offering wear resistance where frequent contact with workpieces occurs; this extends service intervals and keeps measurement uncertainty low over time. These design choices minimise downtime, while robust construction preserves calibration stability and traceability during everyday use. Straightforward operation that speeds workflow The four-button layout simplifies routine tasks: rapid unit switching (mm/inch), immediate zeroing, data hold for off-screen reading, and absolute/relative toggling for comparative measurements. These functions speed up inspection loops and reduce input errors when recording values. The 75–100 mm range is well suited to measuring medium components such as housings, shafts and assembly fixtures, making the tool a practical addition to general-purpose metrology kits. The clear digital display ensures readings are fast to capture and unambiguous, supporting efficient quality control in production environments. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine digital micrometer with 0.001 mm resolution and IP65 protection can be integrated into existing inspection routines and to request detailed specifications or a tailored quotation. Technical data SKU: M302.297 GTIN: 4054469115641 Brand: Metav IndustryLine Category: Micrometers Standard: DIN 863 Facts Measurement range: 75–100 mm Resolution: 0.001 mm Measuring face diameter: 6.5 mm Protection class: IP65 Display functions: ON/zero, mm/inch, ABS, HOLD Data output: RB 4 Special features Ratchet thimble for consistent measuring force Carbide measuring faces Four-button operation Digital display with unit switching Suitable for production and inspection use FAQ How accurate is the Metav IndustryLine digital micrometer M302.297? The Metav IndustryLine digital micrometer M302.297 provides a resolution of 0.001 mm and conforms to DIN 863 conventions, giving reliable accuracy for routine production and inspection tasks. Can the instrument be used in a damp or dusty workshop? Yes, the device is rated IP65, so the Metav IndustryLine micrometer is protected against dust ingress and water jets, making it appropriate for many shop-floor conditions. Which measurement functions are available on the display? The digital display offers ON/zero, mm/inch switching, ABS (absolute) mode and HOLD, enabling flexible operation and easy documentation when using the Metav IndustryLine micrometer. Is the micrometer suitable for measuring larger assembly components? The 75–100 mm range targets medium-sized parts such as housings and shafts; for larger assemblies, a different range would be recommended depending on the component dimensions. How is measurement data output handled? The micrometer provides a data output via RB 4, allowing connection to external data collection or quality systems for straightforward traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Digitales Mikrometer, 0,001 mm Ablesung, 7 Paar Einsätze, verschiebbarer Amboss, Ratsche, Lieferung in Kasten - Metav IndustryLine
Präzise Messwerte und robustes Handling machen das Digitales Uni‑Mikrometer M302.143.D – 75–100 mm zur sinnvollen Wahl für Werkstatt und Labor. Die Ablesung von 0,001 mm und der verschiebbare Amboss sichern reproduzierbare Außenmessungen, die ratschengestützte Messspindel erhöht die Wiederholgenauigkeit. Bestellen Sie das Messgerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Digitales Uni‑Mikrometer M302.143.D – 75–100 mm Das Digitales Uni‑Mikrometer M302.143.D bietet hochauflösende Außenmessungen für präzise Werkstatt‑ und Laboranwendungen Hochauflösende Ablesung 0,001 mm Ratsche für reproduzierbaren Messdruck Verschiebbarer Amboss für flexible Messaufgaben Lieferung in Transportkiste für sicheren Versand Inklusive 7 Paar Messeinsätze Präzision und Messklasse für feinmechanische Aufgaben Das Gerät liefert eine Ablesung von 0,001 mm, was deutlich feiner ist als bei konventionellen Digitalmessschiebern und Feinmessgeräten. Dank der digitalen Anzeige mit ON/OFF, ABS/INC, UNIT‑ und SET‑Tasten lassen sich Messwerte zügig erfassen und umschalten. Der Messbereich 75–100 mm ordnet das Werkzeug der Mikro‑Klasse zu, damit ist es besonders geeignet für feinmechanische Prüfaufgaben, Uhrmacher‑ und Labormessungen, bei denen auf kleinem Raum maximale Präzision gefragt ist. Robustes Handling und verlässliche Messkraft Die mattverchromte Messtrommel und die drehbare Messspindel mit Ratsche sorgen für langlebigen Einsatz und konstanten Messdruck. Die Ratsche verhindert Überdrehen und ermöglicht reproduzierbare Kontaktkraft, was systematische Messfehler reduziert. Die Lieferung in einer Transportkiste schützt das Gerät beim Transport, sodass das Messwerkzeug bereits beim Eintreffen einsatzbereit und unbeschädigt bleibt. Zielgruppe und typische Einsatzfelder Konstruktions‑ und Prüfbereiche in Feinmechanik, Werkzeugbau und Labor profitieren von der feinen Auflösung und der kompakten Bauform. Das Mikrometer richtet sich an Anwender, die präzise Außenmessungen an kleinen Bauteilen durchführen und Wert auf reproduzierbare Messergebnisse legen. Durch die robuste Ausführung eignet es sich sowohl für den Einsatz am Messplatz als auch mobil in Werkstätten. Bedienkomfort, Datenausgabe und Zubehör Die digitale Anzeige mit praktischen Funktionstasten erleichtert Umrechnung und Datenerfassung; der Datenausgang RB 4.1 ermöglicht die Weiterverarbeitung der Messwerte in Prüfsoftware oder Datenerfassungssystemen. Im Lieferumfang sind 7 Paar Messeinsätze enthalten, die den Einsatzbereich erweitern. Die drehbare Messspindel und der verschiebbare Amboss bieten zudem Flexibilität bei der Aufnahme unterschiedlicher Werkstücke. Bestellen Sie das M302.143.D direkt bei Metav Werkzeuge und sichern Sie sich eine zuverlässige Lösung für hochpräzise Außenmessungen; bei Fragen erreichen Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale SKU: M302.143.D Marke: Metav IndustryLine GTIN: 4054469114903 Norm: Werksnorm Material: Messtrommel mattverchromt Digitalanzeige: ON/OFF, ABS/INC, UNIT, SET Datenausgang: RB 4.1 Zubehör: mit 7 Paar Messeinsätzen Fakten Messbereich: 75–100 mm Ablesung: 0,001 mm Messspindel: 6,5 mm Gewicht: 1,3 kg Zolltarifnummer: 90173000 Besonderheiten Verschiebbarer Amboss Ratsche zur Kraftbegrenzung Messspindel drehend Lieferung in Transportkiste: Kunststoff oder Holz Werksnorm FAQ Was bedeutet die Ablesung von 0,001 mm für den Praxisgebrauch? Die Ablesung von 0,001 mm beim Digitales Uni‑Mikrometer M302.143.D erlaubt sehr feine Differenzmessungen, sodass kleinste Toleranzabweichungen an Werkstücken zuverlässig erkannt werden. Ist das Messgerät auch mobil in der Werkstatt einsetzbar? Ja, das M302.143.D ist mit einer robusten Messtrommel und einer Transportkiste ausgestattet, sodass es sich sicher transportieren und direkt an wechselnden Messplätzen einsetzen lässt. Welche Vorteile bietet die Ratsche beim M302.143.D? Die integrierte Ratsche sorgt für eine konstante Kontaktkraft und reduziert mögliche Messfehler durch zu starken Anpressdruck, was die Reproduzierbarkeit der Messergebnisse erhöht. Kann man die digitalen Werte an eine Prüfsoftware anschließen? Der Datenausgang RB 4.1 des Digitales Uni‑Mikrometer M302.143.D ermöglicht die Weitergabe von Messwerten an geeignete Auswerteeinheiten oder Prüfsoftware zur Dokumentation. Für welche Branchen ist dieses Mikrometer besonders geeignet? Das Mikrometer ist ideal für Feinmechanik, Werkzeugbau, Laboranwendungen und Werkstätten, in denen präzise Außenmessungen an kleinen Bauteilen erforderlich sind. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Left-Handed Outside Micrometer 0.01 mm Resolution Ratchet Thimble, Chrome Finish, DIN 863 - Metav IndustryLine
Combining a 75–100 mm measuring range with a 0.01 mm graduation and a ratchet stop, this left‑hand outside micrometer provides repeatable workshop accuracy for external measurements; order the instrument via Metav Werkzeuge for reliable supply and specialist advice. M304.531 Outside micrometer (75–100 mm, 0.01 mm) — Metav IndustryLine The M304.531 Outside micrometer is a left‑hand, mechanical measuring instrument designed for accurate external measurements in production, inspection and general workshop use. 75–100 mm measuring range 0.01 mm graduation and vernier Ratchet stop for repeatable pressure Hardened measuring faces for durability Consistent measurement force for repeatable results The micrometer uses a precision spindle with a 0.5 mm pitch and a thimble graduated to 0.01 mm, which together enable fine, reliably scaled measurements on an analogue instrument. The integrated ratchet stop ensures constant contact pressure, reducing operator variation and improving repeatability in serial checks. This mechanical combination is particularly suited to routine production measurement where stable, comparable readings are required. Durable design that eases everyday inspection Constructed with hardened measuring faces, the device resists wear even under frequent use, which preserves accuracy over time and reduces recalibration frequency. The matt chrome‑plated measuring drum improves legibility by cutting glare while providing corrosion resistance in workshop environments. Conformance to DIN 863 signals adherence to established metrology practice, making the instrument a dependable choice for quality control tasks. Practical advantages for left‑handed operators Configured as a left‑hand version, the instrument adapts its ratchet and thimble orientation to suit left‑handed handling, allowing comfortable operation and clearer reading for left‑dominant users. This ergonomic consideration reduces handling errors and speeds up measurement cycles in mixed‑skill teams, supporting efficient workflow on the shop floor. A trustworthy partner for workshop precision Offered under the Metav IndustryLine, the micrometer pairs solid mechanical engineering with a supplier network focused on accessibility and continuity. Metav’s approach democratises precision: decades of distribution experience and a broad product palette ensure stable supply and appropriate spare parts. For operations seeking predictable measurement performance and supply‑chain reliability, this instrument represents a practical balance of accuracy and robustness. For left‑handed metrology tasks choose the Metav IndustryLine M304.531 — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for precise advice and rapid supply Technical data SKU: M304.531 GTIN: 4054469117126 Category: Messschrauben Facts Measuring range: 75–100 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Standard: DIN 863 Analogue instrument Ratchet stop included Special features Hardened measuring faces Matt chrome‑plated measuring drum Left‑hand version Suitable for external measurements FAQ How accurate is the micrometer for routine checks? The M304.531 outside micrometer offers a 0.01 mm graduation with a 0.5 mm spindle pitch; combined with the ratchet stop, it provides consistent readings suitable for workshop and inspection use. What is the benefit of the ratchet stop? The ratchet stop on the M304.531 limits applied measuring force, ensuring repeatable contact pressure and reducing operator‑dependent measurement variation. Are the measuring faces wear‑resistant? Yes, the instrument is fitted with hardened measuring faces, which prolong service life and help maintain measurement accuracy under regular use. Is this version suitable for left‑handed operators? The micrometer is supplied as a left‑hand configuration to improve ergonomics and reading comfort for left‑handed users, streamlining measurement tasks in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Micrometer Caliper Matt Chrome Measuring Drum With Friction Ratchet, DIN 863, Supplied In Case - Metav IndustryLine
Combine the ratchet stop and the matt‑chrome thimble with DIN 863 compliance to ensure reproducible external measurements in the 75–100 mm range; order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. M304.231 Micrometer (75–100 mm) – Ratchet stop, matt‑chrome thimble by Metav IndustryLine The M304.231 is a mechanical external micrometer designed for routine workshop inspection and precise component checking across the 75–100 mm measuring range. Ratchet stop for reproducible measuring Matt‑chrome thimble to reduce glare Complies with DIN 863 for workshop accuracy Consistent mechanics for repeatable results The instrument relies on a ratchet stop and a robust spindle drive to remove operator variability during closure, which leads to repeatable external measurements. The matt‑chrome thimble reduces surface glare, aiding visual read-off, while the mechanical construction follows DIN 863, a recognised standard for workshop micrometers. These design choices deliver steady performance in daily measurement tasks where reliability matters more than delicate laboratory features. Clear, industry‑standard resolution and function With a resolution of 0.01 mm and a spindle pitch of 0.5 mm, the instrument provides the familiar mechanical division system used across workshops: one full thimble rotation equals 0.5 mm axial advance, and the thimble graduations yield hundredth‑millimetre steps. As an analog device, the micrometer is straightforward to read and resilient in harsher environments where electronic displays may be a liability, making it suitable for production floors and inspection benches alike. Ready for workshop handling and safe transport The tool is supplied complete with a protective transport case, facilitating secure storage and transport between workstations. The matt‑chrome thimble and the proven spindle geometry support long‑term durability with minimal maintenance, while the compact mechanical design keeps servicing straightforward. Conformity with workshop standards ensures compatibility with existing control routines and traceable measurement practices. Contact Metav Werkzeuge for application guidance and secure the M304.231 micrometer from Metav IndustryLine via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: M304.231 GTIN: 4054469116488 Standard: DIN 863 Facts Measuring range: 75–100 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Special features Analog mechanical instrument Ratchet stop for reproducible measuring Thimble matt‑chrome plated Supplied in a protective case for transport FAQ What accuracy can be expected from this micrometer? The M304.231 micrometer provides a standard mechanical resolution of 0.01 mm; as an instrument conforming to DIN 863, it is intended for reliable workshop accuracy in external measurements. How does the ratchet stop improve measurement quality? The ratchet stop on the Metav IndustryLine micrometer limits the applied measuring force, preventing excessive pressure and ensuring reproducible contact pressure for consistent readings. Is the instrument suitable for shop‑floor use? Yes. The M304.231 is an analog mechanical micrometer with a matt‑chrome thimble and robust spindle design, intended for everyday workshop and inspection tasks rather than delicate laboratory-only applications. Does the micrometer come with a case? The micrometer is supplied with a protective case to facilitate safe transport and storage between workstations. How is the 0.01 mm resolution achieved with a 0.5 mm spindle pitch? The spindle advances 0.5 mm per full thimble rotation; the thimble is divided so that each graduation corresponds to 0.01 mm, allowing precise mechanical read‑off without electronics. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Micrometer Caliper With Large Thimble And Friction Ratchet, Chrome-Plated Thimble, DIN 863 - Metav IndustryLine
Take advantage of a precision metrology tool that combines a large matt‑chrome measuring drum, a friction ratchet for repeatable contact force and a fine 0.01 mm reading — ideal for consistent workshop measurement results; order directly via Metav Werkzeuge or contact our consultants for specification advice. M304.251 Outside Micrometer 75–100 mm by Metav IndustryLine — large drum, friction ratchet The M304.251 Outside Micrometer 75–100 mm is a mechanically graduated micrometer designed for accurate external measurements in fine mechanical and workshop environments, manufactured to DIN 863 standard. Outside micrometer »M304.251« by Metav IndustryLine Large matt‑chrome measuring drum with ratchet Hardened measuring faces and 0.01 mm resolution Precision where repeatability matters The micrometer delivers a clear 0.01 mm reading combined with a 1 mm spindle pitch, which together permit controlled advance and straightforward interpretation of measurement changes. The mechanical graduation and the proven DIN standard ensure that readings are traceable and comparable across routine quality checks. The integrated friction ratchet standardises the contact force, reducing variability caused by different operators and improving result reproducibility in serial inspections. Comfort and control for repetitive measuring Designed for frequent use, the instrument’s large matt‑chrome measuring drum offers improved grip and a finer feel when setting the spindle. The spindle diameter of 8 mm provides the necessary stiffness for stable measurement, while the friction ratchet prevents over‑tightening and preserves both the measuring faces and the part under test. The hardened measuring faces maintain long‑term wear resistance, so accuracy is preserved even with intensive daily use. Compact range for fine mechanical tasks With a measuring range of 75–100 mm, this tool sits in the micro range, making it suitable for precision work on small to mid‑sized components. That range is particularly useful in toolmaking, precision engineering and parts inspection where reach and stiffness must be balanced. The instrument’s mass and dimensions are optimised so that handling remains comfortable while delivering the necessary reach for many common workshop tasks. Workshop‑ready and transport‑safe The micrometer is supplied ready for use and comes in a protective transport case for safe storage and movement between the bench and inspection area. Its analogue, mechanical design avoids electronic dependencies and offers immediate, low‑maintenance operation ideal for harsh shop environments. Conformity with DIN 863 supports integration into existing measurement procedures and fits standard inspection routines. Built for reliable inspection workflows Combining robust construction, a clear 0.01 mm scale and a torque‑controlled contact mechanism, this instrument supports tight tolerance checks and repeat measurements with confidence. The instrument’s features reduce measurement uncertainty and contribute to steady production quality — a practical choice where repeatability and low upkeep are priorities. Metav’s selection ensures that workshop needs are met with consistent supply and pragmatic service. Contact Metav Werkzeuge today to discuss the M304.251 outside micrometer for your inspection bench and arrange supply from our Emmerich facility — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: M304.251 GTIN: 4054469116587 Category: Micrometers / Outside micrometers Facts Measuring range: 75–100 mm Reading: 0.01 mm Spindle pitch: 1 mm Spindle diameter: 8 mm Weight: 1.0 kg Standard: DIN 863 Special features Large matt‑chrome measuring drum Friction ratchet Hardened measuring faces Delivered in transport case Analogue mechanical instrument FAQ What is the measurement resolution of this micrometer? The micrometer offers a 0.01 mm resolution, suitable for routine workshop inspection and fine mechanical measurement tasks with clear, repeatable graduations. Does the instrument include a protective case? Yes, the M304.251 is delivered in a transport case to protect the instrument during storage and movement between workstations. How does the friction ratchet benefit measurement quality? The friction ratchet on the M304.251 standardises the contact force during closing, which reduces operator‑induced variation and helps maintain repeatable results across multiple measurements. Are the measuring faces durable for intensive use? The instrument is fitted with hardened measuring faces, providing enhanced wear resistance and reliable long‑term performance in daily workshop use. Which standard does this micrometer comply with? This outside micrometer is manufactured to DIN 863, making it compatible with standard workshop and inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Micrometer With Fine Dial 0.001 mm Resolution, Chrome-Plated Frame In Case - Metav IndustryLine
Benefit from a micro-range measuring instrument that combines 1 µm resolution with an accuracy of ±0.003 mm, supported by a robust matte‑chrome frame and hardened measuring faces for long-term reproducibility; order the Micrometer M307.211 directly via Metav Werkzeuge or consult our technical team for tailored advice. Micrometer M307.211 — 75–100 mm range, 0.001 mm fine-dial A Micrometer M307.211 engineered for precise outside measurements of small components in fine mechanics and workshop quality control. 0.001 mm resolution fine-dial Accuracy ±0.003 mm for high precision Range 75–100 mm in a compact design Matte chrome frame and spindle Precision where small tolerances shape outcomes The instrument offers a true 1 µm graduation, enabling reliable readings down to 0.001 mm and an overall accuracy of ±0.003 mm. Such performance places this micrometer in the high‑precision segment for analogue instruments: it reduces measurement uncertainty during inspection and supports tighter process control in serial production. The fine‑dial reading simplifies interpolation over the last micron, turning critical tolerance checks into repeatable, auditable results. Compact micro-range design for controlled handling Classified in the micro-range for its 75–100 mm span, this micrometer closes the gap between handheld usability and sufficient reach for many fixture and component tasks. The 75–100 mm measuring window provides an optimal balance of reach and stiffness, making it suitable for precise parts such as small shafts, housings and turned components. The instrument’s form factor allows comfortable single‑hand operation while maintaining the structural rigidity needed for consistent dimensioning. Durability and repeatability engineered for daily use Construction features a matte‑chrome frame and a spindle with a 6.5 mm diameter that resist wear and support stable readings under frequent use. The measuring faces are hardened, which preserves contact geometry and reduces wear-related drift over time. Delivered in a protective transport case, the tool is safeguarded during storage and transport, helping to maintain calibration intervals and enabling reliable on‑bench performance over many production cycles. For purchasing guidance or to arrange supply from our Emmerich facility, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — expert advice and prompt delivery are available. Technical Data Article number: M307.211 GTIN: 4054469117485 ECLASS: 21170328 ETIM: EC003590 Customs tariff number: 90173000 Facts Measuring range: 75–100 mm Resolution: 0.001 mm Accuracy: ±0.003 mm Spindle diameter: 6.5 mm Weight: 1.50 kg Analogue reading with fine dial Special features Matte‑chrome frame and measuring spindle Hardened measuring faces Fine‑dial (Feinzeiger) for 0.001 mm reading Transport case included FAQ What measurement resolution does the instrument provide? The micrometer offers a 0.001 mm resolution; the fine‑dial enables readings at the 1 µm level for precise dimension checks with the Micrometer M307.211. How accurate are the measurements in typical use? Typical accuracy is ±0.003 mm, which supports high‑precision inspection tasks and reduces rework by ensuring consistent dimensional control. Is the measuring range suitable for workshop components? Yes; the 75–100 mm span covers many small to medium components and is classified as a micro‑range instrument for fine mechanical applications. Are the measuring faces wear‑resistant? The device is fitted with hardened measuring faces, preserving contact geometry and repeatability throughout prolonged use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Pointed Anvil Digital Micrometer, Friction Thimble, IP65, ISO17025 Cal Cert - Microtech Metrology
Take advantage of ISO 17025 traceability, robust IP65 protection and 0.005 mm resolution for reliable external measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Microtech digital micrometer 75–100 mm — IP65 protected, 0.005 mm accuracy A Microtech digital micrometer 75–100 mm designed for precise external measurements in production, inspection and fine‑mechanical workshops IP65-rated aluminium housing 0.005 mm high-resolution accuracy ISO 17025 calibration certificate included Friction thimble for repeatable pressure mm/inch and hold functions Traceable precision that speeds up quality control The combination of a 0.005 mm stated accuracy and a display resolution of 0.001 mm gives a clear, measurable advantage in routine quality checks and serial inspection tasks. Calibrated and delivered with an ISO 17025 certificate, this digital measuring instrument provides documented traceability for audit cycles and supplier qualification. The result is fewer doubts in release decisions and faster conformity checks because measurement uncertainty and its proof are already handled at delivery. Stable handling for repeatable readings Equipped with a friction thimble and a rotating spindle, the micrometer ensures uniform measuring pressure and easy adjustment for fine approach, reducing operator‑induced scatter. The digital display offers ON/ABS, SET, HOLD and mm/inch switching, which supports both metric and imperial workflows and simplifies recording. These functions translate directly into repeatable results and lower scrap rates, as fewer re-measurements are required and readings can be held for documentation. Built to withstand workshop conditions An aluminium housing with IP65 protection means the instrument resists dust and low‑pressure water jets, making it suitable for demanding shopfloor use rather than bench‑only environments. Pointed measuring faces are optimised for narrow features and small radii, while the compact form factor covering 75–100 mm is classified in the micro measurement range for fine mechanical work. The overall construction balances corrosion resistance and lightweight handling so that durability pairs with everyday usability. Practical benefits for procurement and inspection Delivered calibrated to ISO 17025, the micrometer comes with a calibration certificate that integrates into quality records without additional paperwork. With its 75–100 mm span, the instrument suits inspection tasks where reach and stiffness are required without sacrificing precision; it fills the micro‑range slot between small bench instruments and larger workshop gauges. Purchasing via Metav also offers steady supply and a single‑source partner for accessories and calibration extensions, reducing administrative overhead. For ISO 17025‑certified measurement and ready‑to‑use precision, request a quotation or technical consultation from Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the Microtech digital micrometer (SKU 110451001) and its suitability for specific applications Technical Data SKU: 110451001 GTIN: 4061905040795 Manufacturer: Microtech Metrology Facts Measuring range: 75–100 mm Resolution: 0.001 mm Stated accuracy: 0.005 mm Protection class: IP65 Special features Digital display with ON/ABS, SET, HOLD and mm/inch Friction thimble for constant measuring force Pointed measuring faces Rotating measuring spindle Aluminium housing ISO 17025 calibration certificate included FAQ Is the micrometer delivered with traceable calibration? Yes. The Microtech digital micrometer (75–100 mm) is delivered fully calibrated with an ISO 17025 calibration certificate, enabling direct integration into quality documentation. What level of accuracy and resolution can be expected? The instrument offers a stated accuracy of 0.005 mm and a display resolution of 0.001 mm, suitable for high‑precision workshop and inspection tasks. Can the micrometer be used in a dusty or damp workshop? Yes. The aluminium housing is rated IP65, providing protection against dust ingress and low‑pressure water jets, which supports shopfloor deployment. Are the measuring faces suitable for small radii and narrow features? The micrometer is fitted with pointed measuring faces designed for narrow features and fine mechanical components, which improves contact on small radii. How is operator variability reduced during measurement? The integrated friction thimble and rotating spindle maintain a consistent measuring force, and the hold function on the digital display allows stable readout and documentation; the product is listed under SKU 110451001. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100 mm Thread Micrometer With 75 mm Setting Gauge 60° Supplied In Case - Metav IndustryLine
Benefit from high reproducibility and a compact measuring range: precise 0.01 mm resolution, a non-rotating measuring spindle for stable readings and an included 75 mm, 60° setting gauge. Order the instrument directly via Metav Werkzeuge or consult the advisers for technical matching. Thread micrometer M309.094 – Thread micrometer, 75–100 mm, 0.01 mm accuracy (Metav IndustryLine) A compact Thread micrometer M309.094 designed for precise measurement of external threads in fine mechanical and micro‑assembly applications 0.01 mm resolution for fine thread control Non-rotating measuring spindle for stable readings Includes 75 mm 60° setting gauge Supplied in protective case for safe transport Reliable fine‑thread measurement for consistent production The instrument delivers 0.01 mm resolution on an analogue scale, combining familiar mechanical operation with the precision required for small threaded parts. The non-rotating measuring spindle reduces measurement error caused by spindle rotation and wear, so readings remain reproducible across repeated checks. This stability is important for batch inspection and for processes where thread form and runout are critical; the result is fewer part rejections and clearer feedback for process optimisation. The micrometer is a practical choice where fast, trustworthy measurements are needed without electronic dependencies. Compact range tailored to fine mechanical and watchmaking tasks With a measuring span of 75–100 mm, the instrument sits in the micro‑range of calipers and micrometers and is therefore optimised for fine mechanics. This compact reach offers the best compromise between stiffness and access when dealing with small to medium‑sized threaded parts, such as specialised fasteners, insertion studs or precision components. The supplied 75 mm setting gauge (60°) enables quick verification of the zero point after transport, while the protective case ensures the tool arrives at the bench ready for use. These features support reliable in‑shop inspection and simple transfer between workstations. Robust workshop design that supports everyday accuracy Built for routine use, the micrometer balances mass and manoeuvrability—weighing approximately 1.1 kg—so it feels steady in the hand while remaining easy to handle. The analogue mechanism is straightforward to service and avoids electronic drift, making it suitable for classical metrology benches and environments where maintenance simplicity is an advantage. The construction prioritises repeatability for external thread measurement and is supplied ready for installation in quality control routines. Confidence in measurement is backed by the distribution and quality filtering from Metav IndustryLine, ensuring consistent delivery to the workshop. Contact Metav Werkzeuge for personalised specification advice and delivery from Emmerich; ask about the Metav IndustryLine thread micrometer M309.094 with 0.01 mm resolution and the included 75 mm setting gauge Technical data Article number: M309.094 GTIN: 4054469118192 Manufacturer: Metav IndustryLine Facts Measurement range: 75–100 mm Resolution: 0.01 mm Accuracy: 0.01 mm Weight: 1.1 kg Measuring spindle diameter: 6.5 mm Special features Analogue thread micrometer Non-rotating measuring spindle Includes 75 mm setting gauge (60°) Supplied in protective case Micro‑range instrument (75–100 mm) FAQ What measurement range does the micrometer cover? The micrometer covers a measuring range of 75–100 mm and is classified for micro‑range precision work. What resolution and accuracy can be expected? Resolution and stated accuracy are both 0.01 mm for this analogue instrument, suitable for fine thread inspection. Is a setting or reference gauge included? Yes, the instrument is supplied with a 75 mm, 60° setting gauge for verification of the zero point. Is the spindle designed to rotate during measurement? No, the micrometer features a non‑rotating measuring spindle to improve readout stability and reduce wear. How is the instrument delivered? The micrometer is supplied in a protective case to protect it during transport and storage; it arrives ready for use on the shop bench. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Universal Micrometer 0.01 mm Graduation With Adjustable Anvil, 7 Anvils, Supplied In Case - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, precise 0.01 mm resolution and a ratchet spindle for reproducible measurement results; order the instrument directly via Metav Werkzeuge or request advice from the technical consultants at the Emmerich office. Uni. Micrometer 75–100 mm – Analog micrometer with 0.01 mm resolution and movable anvil (Metav IndustryLine) A Uni. Micrometer 75–100 mm designed for precise external measurements of shafts, housings and turned components in workshop and inspection environments Precision 0.01 mm resolution Movable anvil for stepped parts Ratchet spindle for reproducible pressure Includes 7 pairs of measuring faces Consistent accuracy for routine inspection and production control The micrometer delivers industrially relevant repeatability through its 0.01 mm reading and an analog scale that remains reliable in environments where simple robustness is preferred over electronics. The model’s 75–100 mm measuring range covers common mid‑sized components without sacrificing stiffness, while the ratchet spindle ensures a constant measuring force, reducing operator‑dependent scatter and supporting consistent process control. These characteristics make the instrument suitable for shop‑floor QC and regular setup checks, where traceable, repeatable external measurements are required. Robust mechanics and handling for daily use Mechanical design focuses on long service life and ease of use: the spindle rotates smoothly and the rotating spindle combined with a matt chrome‑plated measuring drum reduces glare and improves legibility on the sleeve. The thimble’s diameter (6.5 mm) and the integrated ratchet give tactile feedback for reproducible contact pressure. The micrometer’s construction balances rigidity and handling, helping to maintain measurement integrity during repeated cycles and supporting efficient inspection routines in production or maintenance departments. Versatile contact geometry and practical accessories Interchangeable measuring faces broaden the application spectrum: the delivery contains 7 pairs of measuring inserts, enabling secure contact with different geometries without custom fixtures. The movable anvil adds flexibility when measuring steps or shoulders on turned parts, eliminating time‑consuming workarounds. The unit complies with the manufacturer’s Werksnorm, and its mechanical simplicity aids straightforward integration into existing inspection procedures, offering reliable results with minimal training. Contact Metav Werkzeuge for expert advice on integrating the Metav IndustryLine Uni. Micrometer into production measurement workflows; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M309.173 GTIN: 4054469118529 eClass: 21170328 ETIM: EC003590 Tariff code: 90173000 Core measurements Measuring range: 75–100 mm Reading / resolution: 0.01 mm Spindle diameter: 6.5 mm Weight: 1.4 kg Design & features Analog micrometer Ratchet spindle included Rotating spindle Matt chrome‑plated measuring drum 7 pairs of measuring faces included Norm: Werksnorm Category: Messschrauben FAQ What measuring range does this micrometer cover? The measuring range is 75–100 mm for the Uni. Micrometer from Metav IndustryLine (SKU M309.173). What is the smallest increment visible on the scale? The instrument has a 0.01 mm reading resolution, shown on the analog drum scale. Are interchangeable measuring faces supplied? Yes, the shipment includes 7 pairs of measuring faces to adapt contact geometry for different parts. Does the micrometer support reproducible measuring pressure? A built‑in ratchet spindle provides consistent contact force for reproducible measurements with the Metav IndustryLine micrometer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100 mm Universal Micrometer With 7 Interchangeable Anvils, Setting Gauge, Friction Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of the combination of reliable shop‑floor robustness, 0.01 mm resolution and quick adaptability via seven interchangeable measuring inserts for consistent quality control; order the instrument directly through Metav Werkzeuge or consult the technical team for application advice. Universal micrometer M309.083 — 75–100 mm range with seven interchangeable measuring inserts, Metav IndustryLine The Universal micrometer M309.083 is a workshop‑grade external measuring instrument designed for repeatable dimensional checks in mechanical engineering and toolmaking. Range 75–100 mm Friction ratchet for constant measuring force Seven interchangeable measuring inserts Supplied in a protective case Repeatable precision that reduces rework Built around a 0.01 mm reading scale, this analogue micrometer is intended for routine quality checks where reproducibility matters. The integrated friction ratchet provides a tactile stop that standardises contact pressure and minimises operator variability, while the non‑rotating spindle preserves the measuring face geometry during use. Together these features yield consistent results from piece to piece, reducing the frequency of rework and improving throughput in inspection processes. Adaptability for varied part geometries Thanks to the set of seven interchangeable measuring inserts, the instrument adapts quickly to different workpiece profiles without the need for multiple fixed gauges. The inserts are supplied in pairs and allow swift switching between flat, rounded or stepped contact faces, shortening setup times at the inspection bench. With a 75–100 mm measuring range and a robust 6.5 mm measuring spindle, the micrometer covers typical external dimensions encountered in component assembly and small‑batch production. Robust construction for everyday workshop use The frame is painted for corrosion resistance and the measuring drum is matt chrome finished to reduce glare and improve scale legibility. Weighing about 1 kg, the instrument balances mass for steady handling while remaining portable for bench or machine‑side use. The device is supplied in a protective case for safe transport and storage, and it is delivered to factory standard (Werksnorm) to ensure immediate usability on the shop floor. Practical benefits for production control Incorporating this micrometer into a standard inspection routine supports fast decision‑making: fewer measurement steps, less fixture swapping and clearer pass/fail assessment. The combination of a reliable mechanical stop, interchangeable contacts and a conventional 0.01 mm scale makes the tool a cost‑efficient choice for acceptance checks, incoming inspection and spot checks during machining operations. The instrument is particularly useful where a tactile confirmation of measurement is preferred over digital displays. Contact Metav Werkzeuge to discuss application suitability for your workshop and secure the Universal micrometer M309.083 from Metav IndustryLine; Metav Werkzeuge GmbH can also advise on complementary gauges and delivery options Technical data Article number: M309.083 GTIN: 4054469117836 Category: Messschrauben Label: Uni.-Mikrometer, 75 - 100 mm 7 Einsätze, Einstellmaß, mit auswechselbaren Einsätzen, Friktionsratsche Measurements Measuring range: 75–100 mm Resolution / accuracy: 0.01 mm Measuring spindle diameter: 6.5 mm Weight: 1 kg Materials & features Frame painted Measuring drum matt chrome Analogue reading Friction ratchet for reproducible measuring force Non‑rotating spindle Includes seven pairs of special measuring inserts Delivered to factory standard (Werksnorm) FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 75–100 mm and is supplied as the Universal micrometer M309.083. What resolution and repeatability are provided? Resolution and typical reading precision are 0.01 mm; the friction ratchet on the Universal micrometer M309.083 helps ensure repeatable contact pressure. Why are interchangeable measuring inserts useful? The seven pairs of special measuring inserts included with the Universal micrometer M309.083 allow adaptation to various workpiece profiles, reducing the need for multiple separate gauges. How does the micrometer ensure consistent measuring force? Consistency is achieved by the integrated friction ratchet, which limits applied force, while the non‑rotating spindle preserves the measuring face alignment during checks on the Universal micrometer M309.083. How is the instrument protected during transport? The micrometer is supplied in a protective case for transport and storage and is delivered to factory standard so it is ready for workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com