Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
75-100mm Dial Anvil Micrometer Ø20mm Anvil, Ratchet Stop, Painted Frame, Matt Chrome Thimble - Metav IndustryLine
Take advantage of precise measuring in a compact format: the combination of 0.005 mm accuracy, a Ø20 mm disc anvil and a ratchet stop ensures reproducible results for fine mechanical components; protected transport reduces risk in delivery. Order the micrometre directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Disc-Faced Outside Micrometre M309.253 — 75–100 mm, Ø20 mm disc anvil The Metav IndustryLine Disc-Faced Outside Micrometre M309.253 is a robust analogue measuring instrument designed for outside measurements in the micro class, handling small components with reliable repeatability. 75–100 mm measuring range Ø20 mm disc anvil for stable contact 0.005 mm specified accuracy Ratchet stop for consistent measuring force Precision for fine mechanical work This analogue micrometre is specified with a measuring range of 75–100 mm, placing it in the micro class of instruments where compact dimensions meet high demands for precision. The instrument delivers a specified accuracy of 0.005 mm and a reading resolution of 0.01 mm, which together support reliable dimensional control in small parts production and inspection. These figures help to reduce rework and scrap by delivering measurable, repeatable data for routine quality checks. Stable contact and repeatable force for consistent readings Equipped with a Ø20 mm disc anvil, the instrument provides a larger contact area than a point anvil, improving stability when measuring rings, small cylinders or slightly irregular surfaces. The integrated ratchet stop prevents over-tightening and standardises the measuring pressure, while the non-rotating spindle avoids rotating the workpiece during measurement. The combination of these features reduces operator influence and produces more consistent results across repeated measurements. Durable finish and protected transport The frame is finished with a painted coating and the thimble is matt-chromed, delivering a workshop-hardy surface that resists corrosion and wear from frequent handling. With a stated weight of 1.1 kg, the tool feels balanced in the hand while remaining sturdy during use. The instrument is supplied in a protective transport case, which safeguards the micrometre for storage and shipping and helps maintain calibration and mechanical condition between uses. Practical applications and workflow benefits Ideal for precision workshops, toolrooms and quality-control benches, this outside micrometre suits small-series production and routine inspection tasks. The mechanical construction and clear graduations make it straightforward for trained technicians to integrate into existing measurement routines, while the disc anvil and ratchet stop contribute to faster measurement cycles with fewer operator corrections. Where small external diameters and fine tolerances are common, the device supports efficient, traceable measurements that feed into quality documentation. For purchase or a technical consultation based on the Metav IndustryLine specifications, contact Metav Werkzeuge directly to discuss how this micrometre fits into existing measurement processes and procurement plans Technical data SKU: M309.253 GTIN: 4054469118727 ECLASS: 21170328 ETIM: EC003590 Harmonised System code: 90173000 Facts Measuring range: 75–100 mm Reading resolution: 0.01 mm Specified accuracy: 0.005 mm Weight: 1.1 kg Disc anvil diameter: Ø20 mm Special features Frame painted; thimble matt-chromed Ratchet stop for reproducible force Non-rotating spindle Analogue outside micrometre (mechanical) Supplied in a protective transport case FAQ What measuring range does this micrometre cover? The micrometre covers a range of 75–100 mm, suitable for micro-class outside measurements on small parts. What accuracy and resolution are specified for the instrument? The Metav IndustryLine M309.253 is specified with an accuracy of 0.005 mm and a reading resolution of 0.01 mm. What advantage does the Ø20 mm disc anvil offer? The Ø20 mm disc anvil gives a larger, more stable contact area that is beneficial when measuring small rings, cylindrical parts or slightly uneven surfaces. Does the micrometre support consistent measuring pressure? Yes, the instrument includes a ratchet stop that standardises the applied measuring force, improving repeatability between operators. How is the instrument delivered to protect its condition? The micrometre is supplied in a protective transport case to safeguard it during shipment and storage, helping to maintain mechanical integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Dial Bore Gauge With Counting Display 0.01mm, Matt Chrome Drum, DIN 863 - Metav IndustryLine
Combining 0.01 mm resolution with a 75–100 mm measuring range and a ratchet stop ensures precise, repeatable outside measurements for workshop quality control; order the instrument directly via Metav Werkzeuge or consult our technical advisors for application guidance. M304.054 Micrometer (75–100 mm) — 0.01 mm graduation, ratchet stop M304.054 is a robust outside micrometer designed for precise dimensional checks in metalworking and inspection benches, featuring an analogue 0.01 mm graduation and a mechanical counter for efficient repeated measurements Precision 0.01 mm graduation Measuring range 75–100 mm Ratchet stop for consistent force Complies with DIN 863 standard Accurate readings for routine quality control The outside micrometer delivers an analogue 0.01 mm division, providing the standard resolution expected in workshop metrology and enabling clear, verifiable measurements for production control. Built to DIN 863, the instrument meets recognised shop-floor standards and is suitable for serial checking of turned or milled parts. The mechanical counter simplifies repetitive tasks by helping to track incremental adjustments without interrupting the measurement workflow, reducing transcription steps and speeding up inspection cycles. Repeatability through controlled measuring force A built-in ratchet stop enforces a consistent contact pressure, which substantially reduces operator-induced variation and improves repeatability between readings. The spindle advances with a 0.5 mm pitch, translating hand motion into fine axial movement that is easy to control; the spindle body has a 6.5 mm diameter for stable guidance. Together with hardened measuring faces, these elements minimise wear and preserve the instrument’s zero and accuracy over extended use, so bench checks stay reliable even after sustained daily operation. Ergonomics and durability for the workshop The instrument combines practical ergonomics with durable finishes: a matt chrome-plated thimble resists glare and offers a tactile surface for precise adjustments, while the overall mechanical design avoids electronic failure modes common in harsh environments. As an analogue micrometer with a mechanical counter, it is particularly suited to environments where robustness and serviceability are priorities. Supplied by Metav IndustryLine, the device benefits from a European quality filter and logistics base that support predictable procurement and stocked availability for maintenance and replacement needs. Contact Metav Werkzeuge for application advice and to secure the Metav IndustryLine M304.054 for your inspection bench — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M304.054 GTIN: 4054469116143 Category: Micrometers Standard: DIN 863 Type: Analogue outside micrometer with mechanical counter Facts Measuring range: 75–100 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Reading / resolution: 0.01 mm Tariff number: 90173000 Special features Ratchet stop Matt chrome-plated thimble Hardened measuring faces Mechanical counter (Zählwerk) eClass: 21170328 ETIM: EC003590 FAQ What measuring range does this micrometer cover? The M304.054 covers a measuring range of 75–100 mm, making it suitable for medium outside dimensions on production parts. How fine is the graduation and what accuracy is expected? The instrument has a 0.01 mm analogue graduation; as an analogue micrometer to DIN 863 it provides the standard shop-floor resolution for routine measurements. Does the micrometer include any features to improve repeatability? Yes — the micrometer is equipped with a ratchet stop to apply consistent measuring force and a mechanical counter to assist with repeated measuring tasks. Are the measuring faces hardened? The micrometer is supplied with hardened measuring faces, which increases wear resistance and helps maintain measurement reliability over time. Which manufacturer supplies this product? The instrument is part of the Metav IndustryLine range and is supplied via Metav Werkzeuge for dependable European distribution. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Dial Test Indicator With Interchangeable Dial, 0.01mm Resolution, Hardened Anvil, In Plastic Case - Metav IndustryLine
Take advantage of the combination of high repeatability, compact workshop ergonomics and a clear 0.01 mm resolution for reliable series inspection; the instrument arrives protected in a transport case and can be ordered directly via Metav Werkzeuge or discussed with our technical consultants. M307.111 Micrometer with Dial Gauge — 75–100 mm, 0.01 mm resolution The M307.111 is a precision micrometer with an integrated dial gauge, designed for repeatable dimensional checks in production and workshop environments. High repeatability for series measurements Measuring range 75–100 mm 0.01 mm dial resolution Matt chrome frame and measuring drum Repeatable precision that reduces rework The instrument delivers high repeatability across repeated measurements, which shortens inspection loops and reduces rework in production. The integrated dial gauge with 0.01 mm resolution provides a visually immediate readout that speeds up pass/fail decisions. A spindle pitch of 0.5 mm and a measuring spindle diameter of 6.5 mm ensure stable contact behaviour, so the measuring process is less sensitive to operator variation and stays consistent through long series runs. Robust construction for everyday workshop use A matt chrome-plated frame and a matt chrome measuring drum provide resistance to wear and keep the measuring faces running true under regular use. The instrument includes hardened measuring faces, improving surface durability and contact stability during repeated cycles. Supplied in a protective case, the design balances rigidity with manageable handling, making the tool suitable for bench work and short on‑the‑go inspections in production cells. Intuitive handling and traceability for quality control Operation is straightforward: the analogue dial gives an immediate, tactile measurement result while the set gauge of 75 mm facilitates quick zeroing and comparative checks. Traceability is supported by the clear article identification and GTIN, which assists inventory control and documentation in quality systems. The combination of a compact measuring range and robust design makes this measuring instrument particularly effective for batch controls, fixture checks and component spot checks where throughput and reliable results are key. For reliable series measurement performance choose the Metav IndustryLine M307.111 from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for ordering or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M307.111 GTIN: 4054469117447 Category: Micrometers Analog display: yes eClass: 21170328 ETIM: EC003590 Tariff number: 90173000 Facts Measuring range: 75–100 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Setting gauge: 75 mm Special features Matt chrome-plated frame and measuring drum Hardened measuring faces Higher repeatability, ideal for series measurements Supplied in transport case Integrated dial gauge (analogue) FAQ What is the measuring range of this micrometer? The measuring range is 75–100 mm for the M307.111 micrometer with dial gauge. What reading resolution does the dial provide? The dial gauge shows a resolution of 0.01 mm on the Metav IndustryLine M307.111. Is the instrument suitable for series inspection tasks? Yes, the tool was designed for higher repeatability and is ideal for series measurements and routine production checks. Does the delivery include a protective case? A transport case is included with delivery to protect the instrument during storage and transport. Which material finishes are used on the micrometer? The frame and measuring drum are matt chrome-plated and the measuring faces are hardened for durability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Digital Blade Micrometer Friction Thimble, mm/inch, Hold, IP65, ISO 17025 Cal Cert - Microtech Metrology
Robust workshop performance meets traceable calibration: an IP65‑rated digital micrometer with a non‑rotating spindle and blade anvil for narrow profiles, delivered with an ISO 17025 calibration certificate for immediate, auditable use — order via Metav Werkzeuge or consult our specialists for application advice. CertiMet BLADE digital micrometer by Microtech Metrology — IP65, 75–100 mm, blade anvil The CertiMet BLADE digital micrometer is a workshop‑grade outside micrometer designed for precise thickness and profile measurements in the 75–100 mm range, especially where a slim blade anvil is needed for narrow grooves and recesses IP65 aluminium housing for workshop protection ISO 17025 calibration certificate included Non-rotating spindle with 6.5×0.75 mm blade anvil 75–100 mm measuring range, 0.005 mm accuracy Built for harsh environments and repeatable workshop use The instrument’s IP65‑rated aluminium housing protects the mechanism from coolant, chips and dust, enabling reliable daily operation on production floors. The non‑rotating spindle combined with a 6.5×0.75 mm blade anvil allows access to narrow features without compromising contact geometry, which reduces measurement variability. A friction thimble supports consistent measuring pressure for reproducible results and longer service life, lowering downtime and maintenance needs. Traceable accuracy and calibration you can rely on With a measuring window of 75–100 mm and an accuracy of 0.005 mm, this digital measuring instrument fulfils demanding inspection tasks in machining and quality control. The display resolution of 0.001 mm gives clear read‑outs for fine adjustments, while the supplied ISO 17025 calibration certificate (Ilac MRA) documents traceability and compliance with laboratory standards. Such documented calibration simplifies integration into quality management systems and audit trails. Practical functions that speed up inspection and reporting The micrometer’s digital interface includes mm/inch, origin and hold functions plus dedicated MODE/SET/UNIT/HOLD keys for quick setup and data capture. The blade anvil geometry makes the instrument suitable for measuring slots, thin edges and profile steps where conventional anvils cannot reach. Combined with its robust housing and precise spindle design, the device serves as a dependable tool for routine shop inspections and batch sampling, improving throughput without sacrificing traceability. Specify the Microtech Metrology CertiMet BLADE when IP65 protection and ISO 17025‑traceable precision are required; contact Metav Werkzeuge for purchase and technical matching to application needs. Technical data Article number: 110661001 GTIN: 4061905457197 Manufacturer: Microtech Metrology Core specifications Measuring range: 75–100 mm Display resolution: 0.001 mm Accuracy: 0.005 mm Protection class: IP65 Special features Blade anvil dimensions: 6.5×0.75 mm Non‑rotating spindle Friction thimble micrometer head Functions: mm/inch, origin, hold Digital display with MODE/SET/UNIT/HOLD keys Aluminium housing Calibration certificate included (ISO 17025 (Ilac MRA)) FAQ What measuring range does the micrometer cover? The micrometer covers a measuring range of 75–100 mm, making it suitable for mid‑sized components and precise thickness checks. Is the instrument digitally readable and what functions are available? Yes; the device features a digital display with mm/inch, origin and hold functions and dedicated MODE/SET/UNIT/HOLD buttons for quick operation. Does the micrometer come with a calibration certificate? A calibration certificate to ISO 17025 (Ilac MRA) is supplied with the device, documenting traceability and enabling immediate use in quality‑assured workflows. Which anvil geometry is fitted and what applications suit it? The micrometer is fitted with a 6.5×0.75 mm blade anvil, ideal for measuring narrow grooves, thin edges and recessed profiles where standard anvils cannot access. How does the IP65 rating benefit everyday use? The IP65 rating ensures protection against jets of water and dust ingress, increasing reliability in machining environments and extending maintenance intervals. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Digital Micrometer 2mm Spindle Pitch IP65 0.001mm Reading Friction Ratchet Plastic Case - Metav IndustryLine
Take advantage of precise, repeatable measurements thanks to a 0.001 mm reading and a 2 mm spindle pitch, combined with IP65 protection for reliable use in shop and workshop environments — order via Metav Werkzeuge or consult our specialists for application guidance. Digital Micrometer M302.287 (75–100 mm) — IP65, 0.001 mm resolution The Digital Micrometer M302.287 is a compact, workshop-grade measuring instrument for precision external measurements in the 75–100 mm range, designed for robust everyday use. IP65-rated for harsh environments 0.001 mm digital resolution 2 mm spindle pitch for fine adjustment Friction ratchet for consistent measuring force High-resolution measurement that reduces rework The instrument delivers a digital resolution of 0.001 mm, ensuring that small deviations are visible at a glance and supporting tighter quality tolerances. Combined with the friction ratchet, the mechanism minimises operator-induced variance by standardising the measuring force, which improves repeatability on serial checks. The micrometer complies with DIN 863, providing an established reference for mechanical performance and manufacturability; the result is a measuring tool that helps reduce scrap and rework by enabling reliable pass/fail decisions in quality control. Compact design for precision on small components Classified in the compact category for its measuring span, the device covers 75–100 mm, placing it among compact micrometers intended for finely detailed workshop tasks. The shorter anvils and rigid frame geometry favour torsion-resistant handling, so small parts, fixtures and assemblies can be measured with steadiness and confidence. Built for frequent use, the instrument suits bench testing as well as portable inspection workflows where a robust, easy-to-handle micrometer is required. Digital features and robust construction for efficient workflow The digital display incorporates ON/OFF, ABS/INC, SET and UNIT functions for direct toggling between modes and simple zeroing, supporting efficient data collection and quicker measurement cycles. The frame is painted and the measuring drum is matt-chromed, while the measuring faces are designed to be durable and precise; the spindle advances in 2 mm pitch steps for controlled travel. With an ingress protection rating of IP65, the device tolerates dust and water jets, extending usable life in demanding environments. A protective transport case is provided for secure storage and safe handling between jobs. For workshop upgrades that demand dependable precision, choose the Metav IndustryLine micrometer — contact Metav Werkzeuge in Emmerich for tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M302.287 GTIN: 4054469115603 Category: Micrometers / Measuring instruments Facts Measuring range: 75–100 mm Resolution: 0.001 mm Protection class: IP65 Spindle pitch: 2 mm Measuring face diameter: 6.5 mm Standard: DIN 863 Special features Digital display with ON/OFF, ABS/INC, SET, UNIT Friction ratchet for repeatable measuring force Frame painted, measuring drum matt-chromed Protective transport case included Eclass: 21170328 ETIM: EC003590 FAQ What accuracy can be expected from this micrometer? The micrometer offers a digital resolution of 0.001 mm and is manufactured to DIN 863 specifications, providing accuracy and repeatability suitable for precision workshop and inspection tasks. Is the instrument suitable for workshop use where coolant or dust is present? Yes, the device is rated IP65, which protects against dust ingress and low-pressure water jets, making it suitable for many workshop environments. How does the friction ratchet improve measurement quality? The friction ratchet ensures a consistent measuring force on each reading, reducing operator variability; this feature supports repeatable results during serial inspections with the Digital Micrometer M302.287. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Digital Micrometer Colour Touchscreen, Wireless USB, IP65, ISO 17025 Calibrated - Microtech Metrology
High-precision digital measurement with wireless connectivity and IP65 protection ensures repeatable results and efficient data capture; the combination of 0.0025 mm accuracy, Wireless + USB transfer and a CNC-machined aluminium housing supports reliable shop-floor integration. Order the Micrometer directly via Metav Werkzeuge or consult our specialists for installation and workflow advice. Microtech digital micrometer 75–100 mm — Wireless & ISO 17025 calibrated A digital micrometer engineered for workshop and laboratory inspection that combines robust IP65 protection with advanced Industry 4.0 data functions Wireless and USB data transfer Colour 2.4" touchscreen display IP65 dust and splash protection ISO 17025 calibration certificate included CNC-machined aluminium housing Reduce measurement uncertainty with proven metrology The instrument delivers 0.0025 mm stated accuracy and a fine 0.0001 mm reading step, making it suited for demanding inspection tasks where small deviations accumulate into costly rework. The spherical R 5 mm anvil reduces contact-point errors on curved or uneven surfaces, while the digital electronics compensate linearly and for temperature influences, which preserves measurement integrity across shifts. This precision directly reduces scrap rates and supports consistent quality gate decisions on the production line. Integrate measurement into production workflows Designed for Industry 4.0 adoption, the device provides multiple data channels: Wireless to MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC and USB HID — with an optional MODBUS RTU (RS-485) for PLC integration. The built-in memory manager stores 2000 values with folder organisation and statistical modes, enabling traceable batch recording and straightforward transfer to SPC systems. These capabilities speed up inspection loops and remove manual entry errors, improving throughput and documentation. Robust build and operator-focused controls Ergonomics and durability meet in the CNC-machined aluminium housing and an IP65 rating that protects against dust and splashing coolant on the shop floor. The 2.4" colour touchscreen offers intuitive menus for Go/NoGo, Max/Min and probe modes, while physical design choices—such as the compact measuring head and spherical anvils—support repeatable positioning and comfortable handling during routine checks. The visual and tactile features reduce operator fatigue and help maintain consistent measuring force and technique. Traceable calibration and typical applications Delivered with an ISO 17025 calibration certificate (Ilac MRA), the instrument is ready for use in regulated quality systems and laboratory environments where documented traceability is required. Its combination of precision, connectivity and ruggedness is well suited to final inspection, incoming goods control and toolroom verification, particularly for small-to-medium sized components in metalworking and precision engineering. The measuring range of 75–100 mm fits tasks that need coverage beyond the basic 0–50 mm bands while remaining compact enough for bench and fixture work. Contact Metav Werkzeuge for application-specific advice and to secure this ISO 17025-calibrated Microtech micrometer; our team in Emmerich can assist with data integration and delivery — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 110361008 GTIN: 4061905457166 Manufacturer: Microtech Metrology eClass: 21170328 Numbers / Core technical data Measuring range: 75–100 mm Accuracy: 0.0025 mm Reading / resolution: 0.0001 mm Display size: Colour 2.4" touchscreen Memory capacity: 2000 values Protection class: IP65 Special features Wireless + USB data transfer DataMet DOUBLE SPHERICAL micrometer with MICS system On-line graphic, analog scale, Go/NoGo, Max/Min, Formula, Timer Linear correction and temperature correction Measuring HUB: Wireless MICROTECH instrument connection, 2D mode, Probe mode 4 modes data transfer: Wireless to MDS app; Wireless HID; Wireless HID+MAC; USB HID Optional MODBUS RTU (RS-485) for industrial connections Anvil type: Sphere R 5 mm CNC-machined aluminium housing Calibration certificate ISO 17025 (Ilac MRA) included FAQ Is the micrometer delivered calibrated? Yes. The Microtech micrometer is supplied with an ISO 17025 calibration certificate (Ilac MRA) and a calibration report that documents traceability for quality systems. Which data protocols are supported for shop-floor integration? The instrument supports Wireless to the MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC and USB HID. An optional MODBUS RTU (RS-485) output is also available for PLC connections. How much measurement memory is available? The device stores up to 2000 values in a folders system, with statistical mode and memory data transfer for batch documentation. Can the micrometer handle harsh workshop conditions? Yes. The micrometer has an IP65 rating and a CNC-machined aluminium housing to resist dust and splashing fluids encountered in industrial environments. What is the benefit of the spherical anvil? The spherical anvil (R 5 mm) minimises point-loading errors on curved or irregular surfaces, improving repeatability in external diameter and feature measurements. Which SKU should be referenced when ordering or requesting documentation? Refer to SKU 110361008 (Microtech digital micrometer) when enquiring about specifications, calibration certificates or data-transfer accessories. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Digital Micrometer Small 2mm Anvils Friction Thimble IP65 Calibration Certificate (ISO 17025) - Microtech Metrology
High-resolution measurement meets workshop resilience: combine 0.001 mm resolution, ±0.005 mm accuracy and IP65 robustness for reproducible external measurements; order the Microtech digital micrometer directly via Metav Werkzeuge or consult our advisors for application support. Microtech digital micrometer (small 2 mm tip, 75–100 mm range) A Microtech digital micrometer for precise external measurement of small radii and fine components in inspection benches and workshop environments. Digital readout, 0.001 mm resolution ISO 17025 calibration certificate included IP65 protection, aluminium housing 2 mm small-tip anvils, friction thimble Precision that reduces rework and speeds inspection The instrument delivers 0.001 mm resolution and an industrial-grade ±0.005 mm accuracy, providing measurable improvement in process control and first-off inspection. Small contact faces with a 2 mm tip make the device suitable for fine-profile parts where conventional anvils cannot reach; the reduced contact area lowers the risk of interference on narrow features. By translating fine mechanical motion into a clear digital readout, the gauge shortens measurement cycles and reduces interpretation errors, supporting faster decision-making in quality checks and set-up routines. Robust mechanics designed for daily production use Protected by an IP65 aluminium housing, the micrometer tolerates coolant spray and dusty workshop conditions without compromising the electronics. The friction thimble ensures a consistent measuring force, improving repeatability across operators, while the rotating measuring spindle assists in aligning to the workpiece. Built-in functions such as mm/inch, origin setting and data hold simplify integration into existing workflows and minimise handling time. These engineering choices focus on uptime and reproducibility rather than cosmetic features, which benefits repetitive inspection tasks in fabrication or assembly lines. Traceable calibration and documentation for quality systems Delivered with an ISO 17025 calibration certificate (Ilac MRA recognised), the tool supports traceability requirements for production control and audit processes. The included documentation confirms the instrument's calibration status at delivery, enabling immediate use in quality assurance procedures without additional delay. For labs and manufacturers that require documented measurement uncertainty, this micrometer decreases administrative lead time and helps maintain conformity with internal inspection plans and external audit expectations. For traceable, workshop-ready measuring instruments from Microtech Metrology, contact Metav Werkzeuge in Emmerich for technical advice and supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: 110651001 GTIN: 4061905040498 Brand: Microtech Metrology ECLASS: 21170328 ETIM: EC003590 Core measurements Measuring range: 75–100 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Readout: digital Measuring anvils: small Ø2 mm Special features IP65 aluminium housing Friction thimble Functions: mm/inch, origin, hold Calibration: ISO 17025 certificate included Measuring spindle: rotating FAQ What measuring range does this micrometer cover? The Microtech digital micrometer covers a measuring range of 75–100 mm and is optimised for external measurements on small to medium components. Is the instrument ready for use upon delivery? Yes. The micrometer is supplied with an ISO 17025 calibration certificate, so the device can be used immediately for traceable measurements. How does the small 2 mm tip affect measurement tasks? Small-tip anvils (2 mm) allow contact with narrow radii and confined geometries; the Microtech micrometer maintains accuracy on such features thanks to its fine contact faces and consistent measuring force. Can the micrometer be used in damp or dusty workshops? The aluminium housing with IP65 protection ensures resistance to dust ingress and low-pressure water jets, making the instrument suitable for typical workshop environments. Which data functions are available on the display? The digital readout offers mm/inch switching, origin setting and a hold function to stabilise displayed values during handling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Digital Micrometer With 2.4" Colour Touchscreen, Non-Rotating Spindle, ISO 17025 Calibration - Microtech Metrology
Benefit from high-resolution measurement (resolution 0.0001 mm) combined with robust mechanics and versatile data transfer via Wireless and USB for streamlined inspection workflows. The instrument is delivered fully calibrated to ISO 17025, including a calibration certificate, so traceability and immediate use in quality control are ensured. Order directly via Metav Werkzeuge or request advice from our consultants. Digital micrometer (75–100 mm) – 2.4" colour touchscreen, Wireless + USB (Microtech Metrology) The digital micrometer is a compact, shop-floor instrument designed for precise dimensional checks in the micro range, suitable for fine mechanical and inspection tasks. Wireless and USB data output 2.4" colour touchscreen display High precision: ±0.004 mm accuracy Precision and traceable calibration for production The instrument delivers a resolution 0.0001 mm and an accuracy ±0.004 mm, providing reliable numerical basis for process decisions and pass/fail criteria. Supplied fully calibrated to ISO 17025, a calibration certificate accompanies delivery which supports audit trails and measurement system analysis. Classed for the micro range, this format prioritises minimal jaw deflection and repeatable contact geometry, which is crucial when documenting tight tolerances on small components. Streamlined data capture to reduce transcription errors Equipped with both Wireless and USB data interfaces and a 2.4" colour touchscreen, the device integrates measurement capture directly into inspection routines. The result is fewer manual entries, faster reporting and reduced rework. A non-rotating spindle eliminates errors introduced by spindle rotation during closing, stabilising readings for repeatable results. These features support automated data logging and compatibility with typical inspection software used in modern workshops. Robust design for daily workshop use and continuity of supply Built for repetitive use, the instrument combines a compact footprint with industrial-grade components for low maintenance and long service life. The delivery includes full ISO 17025 calibration and the accompanying certificate, enabling immediate deployment in quality assurance chains. Note that anvil with ball is not included as standard; accessories may be selected separately depending on the measuring task. Sourcing and logistics are supported from Emmerich by Metav Werkzeuge, which acts as a quality filter for the European market and ensures consistent availability. Contact Metav Werkzeuge to discuss the Microtech Metrology digital micrometer with ISO 17025 calibration and Wireless+USB output for integration into existing inspection processes Technical data Article number: 110741008 GTIN: 4061905457128 Manufacturer: Microtech Metrology Core measurements Measuring range: 75–100 mm Resolution: 0.0001 mm Accuracy: ±0.004 mm Special features Data output: Wireless + USB Display: Color 2.4" touchscreen Non-rotating spindle Delivered calibrated to ISO 17025 with certificate Anvil with ball not included FAQ What measuring range does this instrument cover? The measuring range is 75–100 mm, which places the instrument in the micro-range class suitable for precise small-part inspection. Is the device delivered calibrated? Yes. The digital micrometer from Microtech Metrology (SKU 110741008) is delivered fully calibrated to ISO 17025 and includes a calibration certificate. Which data interfaces are available for integration? The device provides Wireless and USB data output for direct transfer of readings into inspection software or data-collection systems. What resolution and accuracy can be expected? Resolution is 0.0001 mm with an accuracy of ±0.004 mm, offering high repeatability for dimensional control tasks. Are any shaping accessories included, for example a ball anvil? No, the anvil with ball is not included as standard; accessories are available separately to match specific measurement needs. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Digital Micrometer With Ratchet, IP65, Matt Chrome Measuring Drum In Case - Metav IndustryLine
Take advantage of the combination of 1 µm resolution, IP65 protection and a ratchet stop for repeatable external measurements. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. M302.277 digital outside micrometer — 75–100 mm, IP65 (Metav IndustryLine) A M302.277 digital outside micrometer designed for accurate external measurement of shafts, bushings and turned components in workshop and inspection environments 1 µm digital resolution IP65 dust and splash protection Ratchet stop for constant measuring force Supplied in protective case Precision where repeatability reduces rework The instrument delivers 1 µm (0.001 mm) resolution on a clear digital readout, enabling tight tolerance checks and decisive go/no‑go evaluations on production parts. Built to DIN 863 standards, the device combines a robust frame with a finely machined spindle so that each measurement is directly comparable—minimising rework and accelerating inspection cycles. The 75–100 mm measuring range places the instrument in the standard workshop category, offering a practical balance of reach and stiffness for everyday machine‑shop tasks. Built to perform on the shopfloor Designed for practical industrial use, the micrometer features IP65 protection against dust and water jets and a matt‑chromed measuring drum for low glare and long life. A built‑in ratchet stop provides a consistent measuring force, reducing operator‑dependent variation and improving repeatability across series checks. The measuring faces are hardened and precisely ground, Ø 6.5 mm, to resist wear and to keep contact geometry stable over thousands of cycles—ensuring reproducible results on components made of steel, aluminium and similar materials. Intuitive handling and clear traceability The digital display includes ON/OFF, ABS/INC, SET and UNIT functions for straightforward operation and quick switching between metric and other units where relevant. The painted frame and matt‑chrome measuring drum combine tactile durability with corrosion resistance, while the ratchet and ergonomic thimble support comfortable, fatigue‑free measuring. Supplied in a protective case for safe transport and storage, the instrument is ready for immediate use on the bench. The instrument is identified by SKU M302.277 and GTIN for stock control and traceability. Discuss measurement options and calibration with Metav Werkzeuge — the Micrometrology partner for practical, shop-ready precision. Technical data Article number: M302.277 GTIN: 4054469115566 ECLASS: 21170328 ETIM: EC003590 Tariff number: 90173000 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 75–100 mm Resolution: 0.001 mm Measuring face diameter: 6.5 mm Weight: 0.5 kg Protection class: IP 65 Standard: DIN 863 Special features / Versions Digital display with ON/OFF, ABS/INC, SET and UNIT buttons Ratchet stop for constant measuring force Hardened and ground measuring faces Frame painted, measuring drum matt chrome Supplied in protective case (plastic or wooden, for transport) FAQ What accuracy can be expected with this micrometer? The M302.277 outside micrometer provides high repeatability with a resolution of 0.001 mm; accuracy follows DIN 863 tolerances for this instrument class. Is the measuring face hard-wearing for repetitive checks? Yes, the measuring faces are hardened and ground (Ø 6.5 mm), designed to resist wear and maintain stable contact geometry during repetitive measurements. Can the micrometer be used in a dusty shop environment? The instrument has IP65 protection, making the micrometer suitable for dusty and splash-prone shop‑floor conditions. What functions does the digital display provide? The digital readout includes ON/OFF, ABS/INC, SET and UNIT functions to switch modes, zero at any position and change measurement units as required. Does the delivery include a case for safe transport? Yes, the product is supplied in a protective case suitable for transport and storage Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Digital Micrometer With Thin Tips, Colour Touchscreen, IP65, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of traceable calibration and fast data integration to keep quality checks efficient and auditable; the instrument’s ISO 17025 certificate and robust wireless + USB connectivity support continuous production. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Microtech digital micrometer 75–100 mm — ISO 17025 calibrated, wireless + USB The Micrometer from Microtech Metrology delivers a 75–100 mm measuring range with industrial-grade data transfer and protection, designed for precision inspection in workshops and production environments. ISO 17025 calibration certificate included Wireless and USB data output options Colour 2.4" touchscreen with memory IP65 protection for harsh environments Traceable precision that supports quality systems This measuring instrument combines a 75–100 mm measuring range with a rated accuracy of 0.004 mm and a display resolution of 0.0001 mm, making it suitable for standard and demanding quality-control tasks. The factory calibration is carried out to ISO 17025 and is supplied with a calibration certificate, which simplifies traceability in audit cycles and supports documented inspection procedures. Such traceable verification reduces uncertainty in production settings and underpins reproducible measurement results. Streamlined data workflow for modern metrology A focus on connectivity removes manual logging and accelerates reporting: the device offers wireless and USB data outputs, a dedicated MICS data system and multiple HID transfer modes for direct integration with lab PCs and measurement apps. The internal memory stores 2000 values with folder support and statistics modes, enabling batch checks and process monitoring without interruption. Optional industrial interfaces, including MODBUS RTU (RS‑485), broaden integration with automation systems and allow measurement data to feed into SPC or Industry 4.0 setups. Durable build for shop-floor reliability Machined from a solid block of aluminium, the housing is engineered for daily use; IP65 protection keeps dust and coolant at bay while the included friction ratchet ensures consistent measuring force to reduce operator-induced variation. The measuring faces are compact (small Ø2 mm) which supports access to restricted features, and the spindle is rotating to preserve thread life during repeated use. Together these measures maintain performance in production environments and extend service life. Practical benefits and application scenarios Engineers and quality technicians will value the combination of fast data capture, rugged protection and accredited calibration: the instrument suits incoming inspection, in‑process checks and laboratory spot verifications. The colour 2.4" touchscreen simplifies menu access and on-screen readouts, while functions such as Max/Min, Go/NoGo and temperature compensation help translate raw readings into actionable decisions. The design therefore reduces cycle time for inspection routines and helps keep assembly and machining processes within tolerances. Contact Metav Werkzeuge today to discuss how the Microtech micrometer (SKU 110651008) with ISO 17025 calibration and wireless data output can be integrated into your quality workflow or to request tailored advice from our technical consultants Technical Data Article number: 110651008 GTIN: 4061905040535 Manufacturer: Microtech Metrology ECLASS: 21170328 ETIM: EC003590 Facts Measuring range: 75–100 mm Display resolution: 0.0001 mm Accuracy: 0.004 mm Memory: 2000 values Screen: 2.4" colour touchscreen Protection class: IP65 Special features Wireless and USB data output MICS system with advanced data modes Optional MODBUS RTU (RS‑485) interface CNC‑machined aluminium housing ISO 17025 calibration certificate included Friction ratchet for consistent measuring force Small measuring faces Ø2 mm Rotating spindle design FAQ What calibration documentation is supplied with the micrometer? The micrometer is delivered with an ISO 17025 calibration certificate, confirming lab traceability and calibration status. How can measurement data be transferred to a PC or an SPC system? Measurement data can be transferred via wireless modes, USB HID and optional MODBUS RTU (RS‑485), enabling direct connection to PCs, mobile apps and industrial systems. Is the instrument suitable for use in a machine shop environment? Yes, the IP65 protection, CNC aluminium housing and friction ratchet make this instrument suitable for workshop conditions and continuous use in production. What is the usable measuring range and typical applications? The instrument covers 75–100 mm and is suited for incoming inspection, process control and lab checks on medium-sized components. How many readings can be stored locally before transfer? The internal memory supports up to 2000 values with folder organisation and basic statistics modes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Digital Thread Micrometer With 60° Setting, Ratchet, Data Output RB 4.1 In Plastic Case - Metav IndustryLine
Take advantage of precise thread measurement and a clear digital display for reliable quality control in production environments; the built‑in ratchet thimble ensures repeatable contact pressure while the 60° setting gauge simplifies rapid verification. Order the instrument directly via Metav Werkzeuge or consult our specialists for technical advice. Digital Thread Micrometer M302.194.D — Metav IndustryLine, digital, 75–100 mm, 0.01 mm Digital Thread Micrometer M302.194.D provides accurate external thread diameter measurement for workshop inspection and production control, with a dedicated 60° setting gauge for standard thread profiles. Digital display with ABS/INC and UNIT functions Measurement range 75–100 mm Resolution 0.01 mm for fine control Built‑in ratchet thimble for consistent force Reliable, measurable accuracy for routine inspection The instrument is designed for repeatable thread measurement in serial production and quality inspection. The 0.01 mm resolution and stated accuracy of 0.01 mm deliver measurable gains in process control, reducing rework and scrap. The digital display with ON/OFF, ABS/INC, UNIT and SET keys provides an immediate readout and simple unit switching, which speeds up inspection cycles and lowers the risk of transcription errors during data collection. Consistent contact and reduced part damage A ratchet thimble combined with a non‑rotating spindle protects sensitive thread profiles while securing a consistent measuring force. This mechanical control prevents over‑tightening and wear on fine threads, which is particularly important for repeat measurements on precision fixings. The instrument’s mechanics are focused on operational reliability so that each sampled part yields comparable results with minimal operator influence. Integration and practical handling for the workshop The micrometer offers an RB 4.1 data output for integration into measurement networks or data capture routines, enabling documented traceability of inspection results. The 75–100 mm measuring range covers medium external threads commonly encountered in maintenance, toolroom work and production testing, while the compact design and balanced weight support comfortable handling during repetitive tasks. The included 60° setting gauge streamlines thread form verification for common metric and imperial profile checks. Built for production continuity Durability and serviceability are prioritised: the spindle diameter and robust spindle guidance maintain alignment under frequent use, and the instrument’s digital electronics are configured for straightforward operation and reduced downtime. For procurement and planning, the micrometer’s GTIN and SKU allow quick cross‑referencing with inventory systems; the product’s specification supports a rational purchasing decision focused on efficiency and compliance rather than guesswork. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine Digital Thread Micrometer M302.194.D can be integrated into inspection routines and to arrange delivery from Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M302.194.D GTIN: 4054469115207 Category: Messschrauben (micrometers) Brand: Metav IndustryLine Data output: RB 4.1 Facts Measuring range: 75–100 mm Resolution: 0.01 mm Accuracy: 0.01 mm Weight: 0.7 kg Measuring spindle diameter: 6.5 mm Special features Digital display with ON/OFF, ABS/INC, UNIT and SET keys Ratchet thimble for consistent measuring force Non‑rotating spindle to protect thread profiles Supplied without inserts (without anvils) 60° setting gauge for thread verification FAQ What range of threads can be measured with this micrometer? The micrometer covers external thread diameters in the 75–100 mm range; the 60° setting gauge assists in checking standard thread profiles for these sizes. Does the instrument provide a digital output for data logging? Yes, the Metav IndustryLine digital thread micrometer includes an RB 4.1 data output for connection to data‑capture systems and process documentation. How precise is the readout on the Digital Thread Micrometer M302.194.D? The instrument offers a 0.01 mm resolution with a stated accuracy of 0.01 mm, suitable for workshop inspection and production control tasks. Is the spindle design suitable for delicate thread surfaces? The non‑rotating spindle and ratchet thimble are specifically intended to reduce surface damage and ensure consistent contact pressure during repeated measurements. What control functions are available on the digital display? The display provides ON/OFF, ABS/INC, UNIT and SET buttons for simple operation, quick unit changes and zeroing functions as required during inspection routines. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Digital Three-Point Internal Measuring Gauge, Two Heads, HM Measuring Faces, IP65, Calibration Box, Setting Ring - Metav IndustryLine
Benefit from the combination of high precision, robust protection and practical accessories to streamline bore inspection workflows; the device delivers repeatable results for routine quality control and can be ordered directly via Metav Werkzeuge or discussed with their specialists. M312.289.PN Digital three-point internal gauge, IP65, carbide faces (Metav IndustryLine) The M312.289.PN is a digital three-point internal gauge designed for precise measurement of bores and blind holes in workshop and inspection environments Digital readout with dual measuring heads IP65 dust and splash protection Carbide measuring faces for wear resistance Suitable for blind‑hole measurement Robust accuracy for reliable quality control The three‑point measuring principle is implemented here to provide stable contact with the bore, reducing eccentricity and repetition errors; this results in a documented accuracy of ±0.005 mm and a high resolution of 0.001 mm on the display, which is particularly valuable for workshop metrology and first‑piece inspection. The dual‑head configuration covers overlapping ranges (75–88 mm and 87–100 mm), allowing continuous coverage within the 75–100 mm span without recalibration between subranges. The digital readout features ON/PRESET, mm/inch and HOLD functions to simplify data capture and reduce transcription errors during serial checks. Practical operation and measurement versatility Operation is assisted by an 87 mm setting ring and an included 150 mm extension, enabling straightforward transfer of master settings and access to deeper bores where required; the instrument reaches a measuring depth of 127 mm. The instrument is designed for four‑way measurement capability — inside, outside, depth and step — where applicable, and is especially adapted for blind‑hole measurement, offering consistent results even in recessed scenarios. The compact electronic interface with data output RB 6 supports integration into data‑logging workflows for traceable inspection records, improving throughput and reducing manual entry time. Durability, standards and workshop suitability Constructed with carbide measuring faces, the gauge resists wear during repetitive use, maintaining measurement integrity in metalworking environments; the IP65 protection rating ensures reliable operation in dusty or splash‑prone areas on the shop floor. Compliance with DIN 863 reflects conventional workshop metrology practice, and the instrument comes with practical accessories — a setting ring and an extension — to support routine calibration and set‑up. The overall design balances stiffness and handling so that the 75–100 mm range performs as a dependable standard tool for machining, tooling and quality departments. Contact Metav Werkzeuge for tailored application advice and to discuss integration of the M312.289.PN three‑point internal gauge into inspection routines Technical data Article number: M312.289.PN GTIN: 4054469179308 SKU: M312.289.PN Core specifications Measuring range: 75–100 mm (75–88 + 87–100) Resolution: 0.001 mm Accuracy: ±0.005 mm Measuring depth: 127 mm Weight: 5 kg Protection class: IP65 Special features Carbide (HM) measuring faces Digital display with ON/PRESET, mm/inch, HOLD Two measuring heads (dual range coverage) Data output: RB 6 Included accessories: setting ring, extension (150 mm) Suitable for blind‑hole measurements Conforms to DIN 863 FAQ How precise is the instrument for routine inspection tasks? The instrument offers an accuracy of ±0.005 mm and a display resolution of 0.001 mm, making the M312.289.PN suitable for demanding workshop metrology and repeatable bore checks. Can the gauge be used for blind‑hole measurement? Yes, the gauge is configured for blind‑hole measurement and includes an extension and setting ring to reach and set deeper bores reliably. Is the device protected against shop‑floor conditions? The device is rated IP65, providing protection against dust ingress and low‑pressure water jets, which helps maintain performance in typical workshop environments. What accessories are delivered with the gauge? Delivery includes an 87 mm setting ring and a 150 mm extension, enabling quick transfer of settings and extended measuring depth. Does the instrument support data capture for quality documentation? A data output interface (RB 6) is provided to enable connection to data‑logging systems for traceable measurement records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Digital Uni Micrometer With 7 Interchangeable Anvils, 0.001mm Resolution, Non-Rotating Spindle, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.001 mm digital resolution, a non-rotating spindle and a ratchet stop to ensure repeatable, high-fidelity external measurements; order directly via Metav Werkzeuge or consult our specialists for application advice. Digital Uni-Micrometre M302.043.D — Digital micrometre with 0.001 mm resolution and non-rotating spindle (Metav IndustryLine) The Digital Uni-Micrometre M302.043.D is a high-resolution external micrometre designed for precision workshop and quality‑control tasks, offering a compact 75–100 mm measuring range with interchangeable measuring inserts. Digital display, 0.001 mm resolution Non-rotating spindle for twist-free readings Ratchet stop for consistent measuring force Seven interchangeable measuring inserts Precision that removes doubt The micrometre’s 0.001 mm display resolution combined with a stated accuracy of 0.01 mm provides a clear, measurable advantage when checking small tolerances. The non-rotating spindle eliminates errors introduced by spindle rotation during measurement, while the integrated ratchet stop standardises contact force and reduces user‑dependent variation. These technical choices make the instrument particularly suited to repeatable external measurements on turned parts, shafts and precision components where dimensional certainty is required. Compact range for fine components Classified in the compact range for fine‑mechanical work, the 75–100 mm span targets applications that demand high precision in a small footprint. The instrument’s frame is painted and the measuring drum matt chrome‑plated, providing robust protection against workshop wear. Delivery includes seven interchangeable special measuring inserts, extending usability across small diameters, flats and delicate surfaces. This configuration supports efficient inspection routines in toolmaking, micro‑assembly and small‑batch production without sacrificing handling comfort. Seamless data capture and everyday reliability The digital readout features ON/OFF, ABS/INC, UNIT and SET controls for immediate switching between absolute and incremental modes and unit conversion, while data output RB 4.1 enables straightforward integration into measurement logging systems for traceable records. The instrument’s design and control logic prioritise measurement throughput and error reduction, translating into faster inspection cycles and fewer reworks. Metav’s focus on accessible precision ensures that this micrometre pairs technical capability with dependable workshop service and supply. Contact Metav Werkzeuge to discuss whether the Metav IndustryLine Digital Uni‑Micrometre M302.043.D fits your inspection routine, request detailed specs or arrange a quotation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M302.043.D Brand: Metav IndustryLine GTIN: 4054469114194 Facts Measuring range: 75–100 mm Resolution: 0.001 mm Accuracy: 0.01 mm Weight: 1.1 kg Measuring spindle diameter: 6.5 mm Data output: RB 4.1 Special features Digital display: ON/OFF, ABS/INC, UNIT, SET Non-rotating spindle Ratchet stop for constant measuring force Delivery includes seven special measuring inserts Frame painted, measuring drum matt chrome‑plated Norm: Werkssnorm FAQ What measuring range does this micrometre cover? The Digital Uni‑Micrometre covers an external measuring range of 75–100 mm, which is ideal for compact precision tasks and small components. What resolution and accuracy can be expected? The instrument offers a 0.001 mm display resolution and a stated accuracy of 0.01 mm, making it suitable for fine workshop and quality‑control measurements. Can measurement data be exported electronically? Yes. The micrometre provides RB 4.1 data output to capture readings directly into data‑logging or SPC systems for traceability. What is included with delivery? Delivery comprises the micrometre and seven special measuring inserts, enabling immediate use across a variety of small external geometries. How does the non‑rotating spindle help in daily use? A non‑rotating spindle prevents twist‑induced error during closing, so each measurement is more repeatable and less affected by user technique. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Disc Micrometer Ø60mm Measuring Face, Painted Frame, Matt Chrome Drum, Supplied in Case - Metav IndustryLine
Benefit from precise, repeatable measurements thanks to the 75–100 mm range and 0.01 mm reading — robust construction and a matt‑chrome measuring drum ensure long service life. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. M309.153 – 75–100 mm Disc‑Faced Micrometer (Ø60 mm) by Metav IndustryLine M309.153 is a disc‑faced micrometer designed for fine mechanical workshop measurement within the 75–100 mm span Large Ø60 mm disc measuring faces High resolution: 0.01 mm accuracy Painted frame with matt‑chrome drum Consistent precision where it matters The disc‑faced micrometer delivers precise, repeatable readings across its 75–100 mm span, using an analogue graduation with a 0.01 mm reading. This level of resolution is ideal for tasks that demand fine control without the complexity of digital electronics, reducing dependency on batteries while retaining dependable performance. The large Ø60 mm measuring faces provide a stable contact area, which improves repeatability on slightly uneven surfaces and reduces sensitivity to angular misalignment. As an analogue instrument, it offers a straightforward measurement process that integrates smoothly into routine quality checks and workshop tasks. Robust build for everyday workshop use Built with a painted frame and a matt‑chrome measuring drum, the instrument resists surface wear and remains legible after prolonged use. The construction balances stiffness with manageable weight (approx. 1.5 kg), so the tool feels substantial in the hand yet remains suitable for regular handling and transport. The matt‑chrome finish on the drum minimises reflections and enhances the visibility of the scale, which helps speed up inspection cycles and reduces operator fatigue during repeated measurements. These design choices extend service intervals and lower the total cost of ownership in a busy production environment. Practical fit for precision small‑batch and maintenance tasks Placed in the micro range (maximum 100 mm), this micrometer is particularly suitable for fine mechanical work, toolroom checks and maintenance of assemblies where compact accuracy is essential. The disc measuring faces are advantageous for components with larger contact areas, such as flanges or heads, while the defined measuring range covers many common workshop requirements without sacrificing stiffness. Delivery includes a protective transport case, providing safe storage and secure transit between job sites or production cells. The analogue operation makes it straightforward to integrate into established inspection routines and documentation workflows. For reliable workshop measurement choose the Metav IndustryLine M309.153 disc‑faced micrometer—contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M309.153 GTIN: 4054469118451 Category: Messschrauben eClass: 21170328 ETIM: EC003590 Core specifications Measuring range: 75–100 mm Measuring faces: Ø60 mm Reading / Resolution: 0.01 mm Accuracy: 0.01 mm Weight: 1.5 kg Tariff number: 90173000 Standard: Werksnorm Materials & features Frame: painted Measuring drum: matt‑chrome Operation: analogue Delivery: protective plastic or wooden case FAQ What measurement range does this micrometer cover? The M309.153 covers a measuring range of 75–100 mm, making it suitable for micro‑range precision tasks. How fine is the reading on the drum? The analogue drum provides a 0.01 mm reading and an indicated accuracy of 0.01 mm, appropriate for detailed workshop measurements. Is the micrometer supplied ready for workshop use? Yes, the M309.153 is supplied complete and protected in a transport case for safe storage and immediate use in inspection routines. Which applications suit the disc‑faced design best? The Ø60 mm disc measuring faces are ideal for larger contact areas such as flanges, heads or similar components where a stable contact surface improves repeatability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Double Spherical Digital Micrometer Friction Thimble, 0.001mm Resolution, IP65, ISO17025 Cal Cert - Microtech Metrology
Taking robust workshop use and calibration traceability into account, this micrometer pairs IP65-rated aluminium housing with a 0.003 mm accuracy and an included ISO17025 calibration certificate for reliable, repeatable results. Order the CertiMet DOUBLE SPHERICAL digital micrometer directly via Metav Werkzeuge or ask our consultants if needed. CertiMet DOUBLE SPHERICAL Digital Micrometer — Microtech Metrology (75–100 mm, IP65) CertiMet DOUBLE SPHERICAL is a digital micrometer designed for precise external measurements on shafts, bearings and turned parts in demanding shop‑floor environments. IP65 aluminium housing ISO17025 calibration certificate included Friction thimble for consistent contact 75–100 mm range, 0.003 mm accuracy Precision and traceability for critical parts The instrument delivers a measured accuracy of 0.003 mm with a display resolution of 0.001 mm, making it suitable where tight tolerances matter. The electronic readout reduces reading errors common with analogue instruments and the defined friction thimble promotes repeatable contact pressure, so single‑operator variability is minimised. For quality control and inspection tasks, the combination of fine resolution and stable contact gives a clear, rational basis for acceptance decisions and process control. Built for harsh workshop conditions An aluminium housing combined with IP65 protection means the micrometer tolerates dust and splash exposure typical in metalworking and maintenance areas. The robust casing protects the measurement mechanism from coolant mist and light contamination, supporting continuous use at the machine bench. This durability reduces downtime for repair or replacement and contributes directly to a more efficient production flow. Intuitive digital functions for faster workflows The device features a digital display with 0/MODE, SET, UNIT and HOLD buttons, plus functions for mm/inch, origin setting and data hold. These controls speed up repetitive checks and ease cross‑unit comparisons without manual calculation. The friction thimble ensures contact consistency while the origin and hold functions support quick batch checks and documentation, helping to integrate the micrometer into established inspection routines without complex training. Application scope and calibration assurance With a measuring span of 75–100 mm, this tool covers medium‑range external dimensions encountered in component machining and assembly. Ball‑ended measuring faces suit curved surfaces and assist in locating the correct measuring point on round parts. A traceable ISO17025 calibration certificate is supplied, providing documented conformity for internal audits and supplier acceptance, and supporting confidence in measurement results across the production chain. Choose Microtech Metrology’s CertiMet DOUBLE SPHERICAL micrometer for consistent shop‑floor measurement and contact Metav Werkzeuge in Emmerich for product advice and supply — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 110361001 GTIN: 4061905459122 Manufacturer: Microtech Metrology EClass: 21170328 Core specifications Measuring range: 75–100 mm Accuracy: ±0.003 mm Resolution: 0.001 mm Protection class: IP65 Special features Double spherical (ball) measuring faces Friction thimble micrometer head Digital display with 0/MODE, SET, UNIT and HOLD buttons Functions: mm/inch, origin, hold Aluminium housing Calibration certificate included (ISO17025 (Ilac MRA)) FAQ What calibration documentation is supplied with this micrometer? The CertiMet DOUBLE SPHERICAL digital micrometer is delivered with a traceable ISO17025 calibration certificate (Ilac MRA) confirming measured values and supporting audit requirements. What is the measurement range and achievable accuracy? Measuring range is 75–100 mm with an accuracy of ±0.003 mm and a display resolution of 0.001 mm for fine incremental readings. Can the micrometer be used in environments with coolant or dust? Yes, the IP65‑rated aluminium housing protects the instrument from dust ingress and water splashes, making it suitable for typical workshop conditions. Which geometries are best measured with the ball‑ended faces? The spherical measuring faces are particularly useful for locating on cylindrical or slightly rounded surfaces, such as shafts, pins and bearing journals, where a defined contact point improves repeatability. How does the friction thimble affect measurement quality? The friction thimble provides a controlled measuring force, reducing operator variation during closing and increasing repeatability of readings across multiple parts. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm External Micrometer Ratchet Stop, Calibration Certificate ISO17025 - Microtech Metrology
Take advantage of 0.003 mm accuracy, a ratchet stop for repeatable measuring pressure and a delivered ISO 17025 calibration certificate to secure traceable results; order directly from Metav Werkzeuge or consult the technical team for specification support. Microtech Metrology Micrometer 75–100 mm — 0.003 mm accuracy, ratchet stop The Microtech Metrology micrometer is an analogue outside micrometer engineered for precise external measurements in production environments and quality control. High accuracy to 0.003 mm Ratchet stop for repeatable pressure Supplied with ISO 17025 calibration certificate Traceable precision that reduces rework and rejects This instrument delivers a declared measurement accuracy of ±0.003 mm combined with a display resolution of 0.01 mm, which means results are both fine-grained and reliably reproducible. The included ISO 17025 calibration certificate (Ilac MRA) ensures traceability to recognised standards and simplifies integration into laboratory quality systems; this reduces uncertainty budgets in routine checks and supports compliance in documented inspection procedures. For shops transitioning to formalised quality control, the documented calibration is a practical advantage. Consistent measurement force and robust contact geometry A built-in ratchet stop standardises the measuring force, preventing variable clamping pressure from skewing results and improving repeatability across operators. The contact area is formed by a precision anvil with a diameter of 6.5 mm, providing a stable seating for cylindrical and prismatic surfaces. The analogue screw mechanism combines tactile feedback with a mechanical scale that is quick to read and requires no batteries, making the tool immediately usable at the workbench and reducing downtime in busy production settings. Ideal applications and practical benefits in production With a measuring range of 75–100 mm, this micrometer suits medium-sized components commonly found in turned and milled parts, jigs, and assemblies. The combination of fine accuracy and rugged, battery-free operation makes it appropriate for workshop inspection, incoming goods checks and intermittent process control. Where measurement traceability and documented calibration are required by contract or internal quality plans, the instrument’s certification streamlines audit readiness and supports consistent acceptance criteria. Choose the ISO 17025‑calibrated micrometer from Microtech Metrology via Metav Werkzeuge for shop-ready, traceable precision and contact Metav Werkzeuge’s technical team for application guidance Technical data Article number: 110111001 GTIN: 4061905459146 Manufacturer: Microtech Metrology Type: Analogue outside micrometer Facts Measuring range: 75–100 mm Resolution (reading): 0.01 mm Accuracy: ±0.003 mm Anvil diameter: 6.5 mm Special features Ratchet stop for reproducible measuring force ISO 17025 calibration certificate included (Ilac MRA) Mechanical, battery-free operation FAQ What measurement accuracy does the micrometer offer? The Microtech Metrology micrometer provides an accuracy of ±0.003 mm with a reading resolution of 0.01 mm, suitable for fine workshop and quality-control tasks. Is the instrument delivered calibrated? Yes — the micrometer is supplied with an ISO 17025 calibration certificate (Ilac MRA), confirming traceability and lab-grade calibration for documented inspection routines. Which measuring range is covered by this micrometer? The tool covers the 75–100 mm range, making it suitable for medium-sized components commonly inspected in machining and assembly operations. Does the micrometer include a ratchet stop? Yes; the integrated ratchet stop ensures consistent measuring pressure and improves repeatability between operators. What is the article number if ordering or referencing the device? The micrometer is listed under article number 110111001 (GTIN 4061905459146). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Groove Measuring Anvil Micrometer 0.01mm Resolution Friction Ratchet, Supplied in Case - Metav IndustryLine
Combine high-resolution reading (0.01 mm) with a 75–100 mm measuring range and a friction ratchet for repeatable slot measurements; order the micrometer conveniently via Metav Werkzeuge or consult the specialists for application advice. M307.024 Groove Micrometer — micrometer for groove measurement, 75–100 mm, 0.01 mm by Metav IndustryLine M307.024 Groove Micrometer designed for precise slot and groove width checks in workshop and production environments, offering a mechanical reading graduated to 0.01 mm for reliable, repeatable results. 75–100 mm measuring range 0.01 mm graduation Friction ratchet for consistent contact Measuring faces 0.75 × 6.5 mm Accurate slot measurement for reliable quality control The micrometer is built for consistent, repeatable readings in slot and groove verification. With a graduation of 0.01 mm and a stated accuracy of 0.006 mm, the instrument provides the mechanical precision expected in routine inspections and incoming part checks. The spindle pitch of 0.5 mm translates spindle travel into reliable, linear advances; the non-rotating measuring spindle reduces the risk of surface scoring on narrow features while the clearly marked scale facilitates fast analogue read-off. This combination supports efficient decision making on the shop floor and minimises rework. Robust handling that suits everyday workshop use Designed as a practical measuring tool for the standard workshop length class, the instrument’s 75–100 mm range offers the best balance between reach and rigidity for general machining tasks. The friction ratchet ensures a reproducible measuring force, reducing operator-induced variation during repeated checks. Measuring faces sized 0.75 × 6.5 mm concentrate the contact area for narrow grooves without compromising stability. The mechanical construction favours durability in daily routines and straightforward maintenance, making the device a dependable choice for production and service departments. Where and how this instrument adds value This groove micrometer performs particularly well in applications requiring direct measurement of slot widths, keyways and similar narrow features in components. As an analogue, mechanical instrument it is especially suitable when a simple, robust tool is preferred over electronic alternatives. The tool supports rapid sampling and inline checks, helping to keep process throughput high while maintaining measurable quality standards. For processes that demand repeatable physical contact and proven mechanical behaviour, this micrometer is an efficient, low-complexity solution. For precise groove and slot checks, contact Metav Werkzeuge in Emmerich to discuss the M307.024 and suitable measuring strategies — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M307.024 GTIN: 4054469117294 Category: Micrometers Brand: Metav IndustryLine Type: Analog (mechanical) Core technical data Measuring range: 75–100 mm Graduation / reading: 0.01 mm Stated accuracy: 0.006 mm Spindle pitch: 0.5 mm Measuring faces: 0.75 × 6.5 mm Tariff code: 90173000 Display: Analog (nonius) Special features Friction ratchet Non-rotating measuring spindle Intended use: groove and slot measurement Setting standard: from 25–50 mm FAQ What measuring range does this instrument cover? The M307.024 covers a measuring range of 75–100 mm, making it a standard-length micrometer suited to typical workshop tasks. What reading resolution and accuracy can be expected? This analogue micrometer offers a 0.01 mm graduation with a stated accuracy of 0.006 mm, enabling precise slot-width checks and consistent inspection results. Does the spindle rotate during measurement? No — the M307.024 features a non-rotating measuring spindle to reduce surface damage and improve repeatability when measuring narrow grooves. How does the friction ratchet benefit measurements? The built-in friction ratchet on this Metav IndustryLine micrometer ensures a constant measuring force, which reduces operator variation and enhances reproducibility for repetitive checks. Which feature sizes are suitable for contact with narrow slots? The measuring faces measure 0.75 × 6.5 mm, concentrating contact for narrow features such as keyways and grooves while maintaining stable support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Height Gauge With 35mm Measuring Faces, Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high measuring accuracy together with modern data transfer and an ISO 17025 calibration certificate for reliable quality assurance in production and inspection. Order the device through Metav Werkzeuge or contact the technical consultants for detailed integration advice. Digital Micrometer 75–100 mm — Wireless + USB, 1.54" touchscreen (Microtech Metrology) The Digital Micrometer is a precision measuring instrument for bench and workshop inspection, designed for repeatable external diameter measurements in production and laboratory environments Resolution 0.0001 mm display Accuracy ±0.005 mm industrial grade Wireless + USB data output ISO 17025 calibration with certificate Consistent high precision for production control Engineered for repeatable external measurements, this digital instrument delivers ±0.005 mm accuracy and a display resolution of 0.0001 mm, making it suitable for demanding inspection tasks where traceable results matter. The combination of fine display resolution and measured accuracy reduces uncertainty in pass/fail decisions and supports statistical process control. The non-rotating spindle minimises measurement error caused by spindle rotation and contact wear, improving reproducibility across repeated checks. Modern data handling that speeds documentation Data output via Wireless+USB allows straightforward logging into quality-management systems or direct transfer to inspection software, cutting paperwork and transcription errors. The 1.54" touchscreen provides fast, unambiguous readings and simple operation in busy workstations; live digital output removes the need for manual entry, accelerating traceability and reporting. Compatibility with common data-collection workflows makes this instrument an efficient link between shopfloor measuring and digital record keeping. Robust contact faces and certified calibration for trust The measuring faces are provided as disc Ø35 mm, offering a stable contact surface for cylindrical and irregular parts while distributing contact pressure evenly. Delivered fully ISO 17025 calibrated with a certificate, the instrument supports accredited measurement chains and audit requirements. Built by Microtech Metrology, the device combines durable construction with modern electronics for long-term serviceability and dependable measurement results under routine workshop conditions. Contact Metav Werkzeuge today to discuss how the Microtech Metrology digital micrometer and its ISO 17025 certificate can be integrated into the existing inspection routine or to request a tailored quotation from our specialists Technical data Article number: 110781007 GTIN: 4061905457463 Manufacturer: Microtech Metrology eClass: 21170328 ETIM: EC003590 Facts Measuring range: 75–100 mm Accuracy: ±0.005 mm Resolution: 0.0001 mm Display: Touchscreen 1.54" Special features Data output: Wireless + USB Measuring faces: Disc Ø35 mm Non-rotating spindle Digital instrument ISO 17025 calibration with certificate FAQ What accuracy can be expected from this micrometer? The micrometer provides an industrial-grade accuracy of ±0.005 mm and a display resolution of 0.0001 mm, suitable for routine and higher-precision inspection tasks. Is a calibration certificate included with delivery? Yes, the device is supplied fully calibrated to ISO 17025 and comes with the corresponding calibration certificate for traceable measurement records. How can measurement data be exported from the instrument? Measurement values are exported via Wireless+USB, enabling integration with inspection software or direct data logging for quality documentation. Are the measuring faces suitable for cylindrical parts? The instrument features disc Ø35 mm measuring faces, which provide a broad, stable contact area ideal for many cylindrical and irregular components. Who manufactures this micrometer? The micrometer is manufactured by Microtech Metrology and distributed via Metav Werkzeuge, ensuring professional production and service standards. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Micrometer Outside Measurement 0.001mm Resolution ISO 17025 Calibrated Certificate Included - Microtech Metrology
Take advantage of the combination of 1 µm resolution, ±0.003 mm accuracy and an ergonomically controlled contact pressure via the friction thimble for consistent, repeatable external measurements. The instrument is supplied with an ISO 17025 calibration certificate, ensuring traceability and immediate use in quality control. Order the micrometer directly via Metav Werkzeuge or consult our advisors for application-specific advice. Micrometer – Microtech Metrology 75–100 mm, 0.001 mm resolution The micrometer for high-precision external measurements in precision workshops and laboratory quality control, covering the 75–100 mm range 1 µm resolution (0.001 mm) ISO 17025 calibration certificate included Friction thimble with ratchet stop Measuring range 75–100 mm Accuracy ±0.003 mm Precision that improves throughput and reduces rework This micrometer delivers 1 µm resolution combined with an ±0.003 mm accuracy class, which supports reliable pass/fail decisions in production and incoming inspection. The fine graduation and mechanical design convert smallest spindle movements into clear, repeatable indications, reducing the need for repeat checks and lowering scrap rates. Classified for compact ranges, the instrument’s 75–100 mm span places it within the Micro group of calipers and gauges, making it particularly suitable where stiffness and fine control over short spans are essential. Design features that prevent operator error and raise repeatability A friction thimble plus ratchet stop ensures consistent contact pressure and minimises variation from differing hand force, so measurements remain comparable between operators. The analogue, mechanical construction avoids electronic drift and is inherently robust in harsh workshop environments. Supplied fully calibrated to ISO 17025, the micrometer comes with a calibration certificate that documents traceability and allows immediate integration into quality routines or audit trails without additional lead time. Practical suitability for workshops and labs The instrument is intended for outside measurements in toolrooms, precision workshops and laboratory quality-control benches. Its compact Micro classification offers superior torsional stiffness over short spans, improving stability when measuring small to medium-sized components. With an anvil diameter of Ø6.5 mm, the contact geometry is adapted for reliable seating on cylindrical and flat workpieces, ensuring secure contact and consistent results during routine inspections. Contact Metav Werkzeuge for a tailored technical consultation or quotation for the Microtech Metrology micrometer (SKU 110111000); call +49 2822 7131930 or email info@metav-werkzeuge.com for specification matching and ordering assistance Technical data Article number: 110111000 GTIN: 4061905456879 Manufacturer: Microtech Metrology Facts Measuring range: 75–100 mm Resolution: 0.001 mm (1 µm) Accuracy: ±0.003 mm Anvil diameter: Ø6.5 mm Type: analogue Ratchet: yes Special features ISO 17025 calibration certificate included Friction thimble micrometer head Designed for external (outside) measurements FAQ What resolution and accuracy does this micrometer offer? The micrometer from Microtech Metrology (SKU 110111000) provides a resolution of 0.001 mm (1 µm) and an accuracy of ±0.003 mm, suitable for precise workshop and inspection tasks. Is the instrument delivered calibrated and traceable? Yes. The micrometer is delivered fully calibrated with an ISO 17025 calibration certificate, supplied with the tool for immediate use in quality-controlled environments. For which applications is the gauge best suited? This analogue micrometer is intended for external measurements in precision workshops, toolrooms and laboratory quality control within the 75–100 mm measurement span (Micro classification). How does the ratchet and friction thimble help in daily use? The ratchet and friction thimble control contact pressure and reduce operator-induced variation, improving repeatability and ensuring consistent measurement results during repetitive inspections. Is this a digital instrument? No; the instrument is an analogue micrometer with mechanical readout and a precision thimble, designed for durability and stable performance without reliance on electronics. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Micrometer Screw Gauge With Microcomputer Thread Measurement, 2.4" Colour Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Compact precision, traceable results and seamless data capture make this digital micrometer an efficient choice for inspection and production use; the combination of ISO 17025 calibration, ±0.004 mm accuracy and wireless/USB connectivity supports reproducible workflows. Order the instrument via Metav Werkzeuge or consult their specialists for application advice. Digital Micrometer — 75–100 mm measuring range, 2.4" colour touchscreen (Microtech Metrology) The micrometer is a digital measuring instrument designed for precise external and thread measurements in workshop and inspection environments, featuring a non-rotating spindle and integrated microcomputer. ISO 17025 calibration included Measuring range 75–100 mm 2.4" colour touchscreen display Wireless and USB data output Traceable accuracy for critical dimensions The instrument delivers traceable measurement results thanks to its ISO 17025 calibration and accompanying calibration certificate, which document conformity to recognised laboratory standards. With a stated accuracy of ±0.004 mm and a reading resolution of 0.0001 mm, the device reduces uncertainty in quality control and first-off inspections, making it suitable for demanding tolerance checks and lot acceptance tests. This traceability supports auditability and simplifies documentation in regulated environments. Faster, error‑resistant data capture for modern production Integrated Wireless and USB outputs plus a 2.4" colour touchscreen enable rapid capture and transfer of measured values into inspection software or spreadsheets, cutting manual transcription errors and speeding reporting. The touch interface presents readings clearly and allows quick function selection, while the data interfaces support both mobile and PC-based workflows. The result is a measurable efficiency gain in measurement loops and simplified statistical process control. Thread and external measurement without risk of damage Equipped with a non-rotating spindle and a microcomputer tuned for thread evaluation, this instrument is optimised for external thread checks and delicate parts where spindle rotation could damage the workpiece. The supplied set of 6x anvils (0.4–7 mm) broadens the usable contact geometry for different thread forms, allowing reliable contact and consistent force application for repeatable results. Ready for workshop use and routine inspection The instrument arrives fully calibrated to ISO 17025 and includes the calibration certificate, which removes initial uncertainty and makes it ready for immediate use in production environments. Robust digital electronics and a practical measuring range of 75–100 mm cover a wide span of typical components without sacrificing handling comfort. The compact form factor and clear display support single-operator checks and bench inspection tasks alike. Contact Metav Werkzeuge to request detailed specifications or to secure the Microtech Metrology micrometer with ISO 17025 calibration and the included accessory set for integration into quality-controlled production Technical information Article number: 110711008 GTIN: 4061905456916 Manufacturer: Microtech Metrology Core specifications Measuring range: 75–100 mm Resolution (reading): 0.0001 mm Accuracy: ±0.004 mm Display: Colour 2.4" touchscreen Data output: Wireless, USB Features & accessories Non-rotating spindle ISO 17025 calibration with certificate included Included accessories: 6x anvils 0.4–7 mm (metric 60) Digital instrument with microcomputer for thread measurement FAQ What level of accuracy can be expected from this micrometer? The micrometer from Microtech Metrology offers an accuracy of ±0.004 mm and a resolution of 0.0001 mm, suitable for routine inspection and critical dimensional checks. Is the instrument delivered calibrated and documented? Yes — the device is supplied calibrated to ISO 17025 and includes the corresponding calibration certificate. Which interfaces are available for data transfer? Readings can be exported via Wireless and USB connections for integration with inspection software or data-collection systems. Can the micrometer be used for thread measurement? The integrated microcomputer and supplied anvils make the instrument well suited for external thread measurement and delicate parts; the non-rotating spindle helps prevent workpiece damage. What is the product reference for ordering and spare parts? The article number (SKU) is 110711008 and the GTIN is 4061905456916 for ordering and traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Micrometer With 20mm Measuring Faces, Colour Touchscreen Display, Wireless/USB, IP65, ISO 17025 - Microtech Metrology
Take advantage of a fully calibrated precision instrument with ISO 17025 traceability, IP65 protection and wireless data transfer for streamlined quality control. The combination of high accuracy ±0.004 mm, fine resolution 0.0001 mm and a clear 1.5" colour touchscreen supports fast, reproducible measurements in the workshop. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Micrometer (75–100 mm) with 1.5" colour touchscreen — Microtech Metrology Micrometer — a precision digital measuring instrument for fine industrial and laboratory use, optimised for compact components and repeatable, traceable data capture IP65 protection for dusty and wet environments ISO 17025 calibration certificate included Wireless and USB data output for traceable transfer 1.5" colour touchscreen for clear numeric display Accurate results that cut uncertainty The micrometer delivers accuracy ±0.004 mm and a resolution 0.0001 mm, which together reduce measurement uncertainty for small to medium components. This level of performance is particularly beneficial where parts require consistent tolerances; the device’s measurement chain and electronics are designed to preserve repeatability. The supplied ISO 17025 calibration certificate guarantees traceability to recognised standards, supporting both in-house quality routines and external audits. Built to withstand workshop conditions Designed with an IP65 rating, the instrument tolerates dusty and splashing conditions common at production benches. The 20 mm measuring faces (round anvils) provide stable contact on uneven surfaces while the integrated friction ratchet prevents over‑clamping and ensures uniform measuring force. A non-rotating spindle further reduces wear on the measuring faces and supports consistent readings over extended use, extending service life and lowering total cost of ownership. Modern data handling for faster workflows Equipped with Wireless and USB data outputs, the gauge simplifies documentation and error‑free transfer of measurements into quality systems and spreadsheets. The 1.5" colour touchscreen presents readings clearly and speeds up inspection routines, reducing the time between measurement and analysis. These connectivity options help integrate the instrument into digital workflows without sacrificing the usability expected at the bench. Compact range, broad applicability With its 75–100 mm measuring span this instrument falls into the micro class of micrometers, ideal where high precision on compact parts matters most — watch components, small housings, or precision fixtures. The device balances reach and rigidity: compact construction keeps handling intuitive while delivering the stiffness required for reproducible contact measurements. The unit is therefore suited to both workshop quality control and precise bench inspection tasks. For traceable, workshop-ready precision choose Microtech Metrology’s micrometer and contact Metav Werkzeuge for personalised procurement and technical advice from our Emmerich warehouse. Technical data SKU: 110781008 GTIN: 4061905041389 Brand: Microtech Metrology Category: Micrometers ECLASS: 21170328 ETIM: EC003590 Core technical data Measuring range: 75–100 mm Resolution (reading): 0.0001 mm Accuracy: 0.004 mm Measuring faces diameter: 20 mm Display size: 1.5" colour touchscreen Special features Data output: Wireless + USB IP protection: IP65 Friction ratchet Non-rotating spindle Digital instrument (colour touchscreen) Delivered fully calibrated to ISO 17025 (calibration certificate included) FAQ What measurement range does the micrometer cover? The micrometer covers a measuring span of 75–100 mm, placing it in the micro class for compact, high‑precision tasks. Is a calibration certificate supplied with the instrument? Yes, the instrument is delivered fully calibrated and includes an ISO 17025 calibration certificate for traceable results. How are measurements transferred to a PC or database? Measurement data can be exported via Wireless connection or USB, enabling direct import into quality software and spreadsheets. Are the measuring faces suitable for irregular surfaces? The device has 20 mm round measuring faces and a friction ratchet, which together provide stable contact and consistent measuring force for small workpieces. Can this micrometer be used on a shop floor? Yes, the IP65 rating makes the instrument resistant to dust and splashing, suitable for many workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75-100mm Micrometer With Ratchet, 0.01mm Reading, Powder-Coated Frame, Chrome Drum, DIN 863 - Metav IndustryLine
Take advantage of precise 0.01 mm mechanical reading and a ratchet stop for repeatable measuring force, combined with a robust powder‑coated frame and matt‑chromed drum for durable everyday use. Order the micrometer directly via Metav Werkzeuge or ask our consultants if further advice is required. M304.411 outside micrometer – 75–100 mm, 0.01 mm resolution, ratchet stop (Metav IndustryLine) The M304.411 outside micrometer is an analogue measuring instrument for external dimensions, built for workshop and production use in mechanical engineering and metalworking. Ratchet stop for consistent measuring force 0.01 mm mechanical reading accuracy Blue powder‑coated rigid frame Delivered in protective case Consistent, repeatable measurements for production settings This analogue micrometer combines a fine 0.01 mm graduation with a ratchet stop, ensuring every measurement is taken with the same contact force and therefore high repeatability. Conformance with DIN 863 provides standardised accuracy and interchangeability in inspection routines. The spindle pitch of 0.5 mm per revolution translates mechanical turns into reliable linear movement, while the ratchet prevents over‑tightening and measurement error. These technical choices favour measurable process stability in serial inspection and routine quality checks. Built to withstand daily workshop demands The frame is blue powder‑coated to resist wear and maintain visible condition in busy environments, while the measuring drum is matt‑chromed to reduce glare and improve legibility. The measuring faces are hardened, providing long service life against wear when measuring shafts, journals and finished parts. As an analogue instrument, it requires no batteries, simplifying maintenance and ensuring immediate readiness at the bench. The instrument is supplied in a protective case for safe storage and transport between workstations. Practical scope and application in quality control With a measuring range of 75–100 mm, the device covers medium external dimensions commonly encountered in component production and maintenance. The micrometer is suitable for assessing shaft diameters, bearing seats and turned components where precise external measurement is required. The instrument’s mechanical design supports fast, tactile measuring routines that integrate easily into workshop workflows; the combination of robust construction and standardised accuracy makes the M304.411 a reliable choice for both shopfloor inspection and incoming goods control. Contact Metav Werkzeuge in Emmerich for technical advice or to request the Metav IndustryLine micrometer (M304.411) with ratchet stop and 0.01 mm accuracy — info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: M304.411 GTIN: 4054469116907 Manufacturer: Metav IndustryLine Standard: DIN 863 Facts Measuring range: 75–100 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm/revolution Measuring spindle diameter: 6.5 mm Special features Ratchet stop for consistent measuring force Hardened measuring faces Frame: blue powder‑coated Measuring drum: matt‑chromed Delivered in protective case Analogue mechanical instrument FAQ What measuring range does this micrometer cover? The instrument covers an external measuring range of 75–100 mm, making it suitable for medium‑sized components and general workshop inspection. How fine is the reading and how is repeatability ensured? Reading is 0.01 mm and repeatability is enhanced by the ratchet stop and the spindle pitch of 0.5 mm per revolution, which together ensure consistent contact force and reliable results. Is the micrometer suitable for production use? Yes. The M304.411 from Metav IndustryLine is designed for workshop and production environments, with hardened measuring faces and a powder‑coated frame for durability. Does the instrument require batteries or electronic calibration? No. This is an analogue micrometer and operates mechanically without batteries; calibration can be performed according to the workshop’s standard procedures. How is the micrometer supplied? The micrometer is supplied in a protective case and finished with a matt‑chromed measuring drum and powder‑coated frame for safe transport and daily handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Micrometer With Ratchet, Matte Chrome Thimble, Painted Frame, Supplied In Case - Metav IndustryLine
Take advantage of the combination of repeatable measuring force, a glare‑reducing matt‑chrome thimble and conformity to DIN 863 for dependable workshop results; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Micrometer M304.611 — 75–100 mm, ratchet thimble The Micrometer M304.611 is an outside micrometer designed for precise external measurements in fine mechanical and workshop environments, covering the 75–100 mm measuring range with a ratchet stop for constant force Ratchet stop for constant measuring force Matt‑chrome thimble for reduced glare Painted frame with robust construction Conforms to DIN 863 for measurement accuracy Reliable repeatability for production and inspection The ratchet stop and the finely graduated thimble provide consistent measuring force, which reduces variability between repeated measurements and shortens inspection cycles. With a spindle pitch of 0.5 mm and a reading step of 0.01 mm, the instrument supports routine quality checks where reproducible results are essential. The combination of mechanical simplicity and standardised design helps maintain throughput while keeping calibration intervals predictable. Durable design for daily workshop use A lacquered frame combined with a matt‑chrome thimble gives the instrument a tough exterior that resists workshop wear and reduces glare under bright inspection lighting. The robust construction is suited to frequent handling and provides stable contact pressures through the spindle and ratchet mechanism, translating to long service life and fewer interruptions for maintenance. This ensures steady performance where tools are used throughout a shift. Standard compliance and classification for correct application Built to DIN 863, the micrometer meets established requirements for measuring instruments in mechanical engineering and inspection. Its 75–100 mm range places it in the compact range for fine mechanical tasks that demand high positional control yet sufficient reach. As an analog measuring instrument, it offers tactile feedback and a straightforward adjustment concept familiar to technicians and metrology staff, facilitating rapid adoption on the shop floor. Choose the Metav IndustryLine micrometer for robust, repeatable external measurements and contact Metav Werkzeuge for tailored procurement or application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M304.611 GTIN: 4054469117164 Category: Messschrauben Standard: DIN 863 Facts Measuring range: 75–100 mm Measuring range min: 75 mm Measuring range max: 100 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Analog instrument: yes Special features Material: lacquered frame; matt‑chrome thimble Ratchet stop: yes Norm: DIN 863 Category: Messschrauben FAQ What measuring range does this micrometer cover? The micrometer covers a 75–100 mm measuring range, suitable for compact to medium external measurements. Is the instrument suitable for routine shop‑floor inspections? Yes. The ratchet stop and durable frame make the instrument well suited to repeated use in production and inspection tasks. What level of reading resolution is provided? The device provides a 0.01 mm reading step, supporting routine quality control and dimensional checks. Does the micrometer comply with any standards? The instrument is manufactured to DIN 863, ensuring conformity with common metrology requirements. Which materials are used in the construction? The frame is lacquered for resilience, while the thimble has a matt‑chrome finish to reduce glare and improve legibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-100mm Non-Rotating Digital Micrometer With Colour Touchscreen, IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high-precision measurement, integrated Industry 4.0 connectivity and a robust IP65 CNC-machined aluminium housing for reliable shop-floor data capture; the micrometer is supplied with an ISO 17025 calibration certificate. Order the micrometer directly via Metav Werkzeuge or contact our consultants for system integration advice. Micrometer (digital) by Microtech Metrology — 75–100 mm range, ISO 17025-calibrated, Wireless + USB A Micrometer designed for accurate external measurements in production and laboratory environments, offering a 75–100 mm measuring range with advanced digital connectivity and industrial-grade protection. ISO 17025 calibration certificate included Wireless and USB HID data transfer IP65 CNC-machined aluminium housing 2.4" colour touchscreen display Precise, verifiable measurement that feeds production control The digital micrometer delivers high repeatability with a specified accuracy of ±0.004 mm and a fine reading increment of 0.0001 on the scale, ensuring measurable improvements in quality control. The compact anvils (6.5 x 0.75 mm) concentrate the measuring force for clear contact on small diameters, while the solid CNC-machined aluminium housing protects the measurement mechanism from shop-floor contaminants. This construction contributes to long-term stability and reduces recalibration frequency, which supports predictable production output. Seamless data integration for Industry 4.0 workflows Equipped with Microtech’s MICS system and multiple transfer modes, the instrument enables automated data collection and live monitoring. Available transfer modes include wireless connection to the MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC and USB HID, with an optional MODBUS RTU (RS‑485) interface for PLC-level integration. The on-board memory management stores 2,000 values with folder organisation and statistics mode, which simplifies traceability and reduces manual transcription errors—key for regulated or high-volume environments. Functional tools to speed inspection and decision-making The instrument combines practical measurement functions—Go/NoGo, Max/Min, formula evaluation, linear and temperature correction, timer and online graphical display—so measurements can be interpreted immediately at the point of inspection. The 2.4" colour touchscreen presents data and graphics clearly, accelerating operator decisions and reducing rework. These features make the device suitable not only for standalone checks but also as a node in automated measurement loops. Durable design for real-world workshop use With an IP65 rating and a chassis milled from solid aluminium, the micrometer tolerates coolant spray and fine dust typical of manufacturing environments. The robust design maintains alignment of the spindle and anvils under repeated use, helping to keep measurement uncertainty low across long production runs. The supplied ISO 17025 calibration certificate (Ilac MRA) documents traceability and supports internal quality audits and customer confidence. Practical benefits for procurement and integration Choosing this digital micrometer reduces manual logging, accelerates throughput and simplifies audit trails. The device’s compatibility with common data protocols and the optional industrial interface mean that it can be integrated into statistical process control systems without bespoke software development. This rational approach to measurement improves inspection efficiency and supports continuous improvement strategies on the shop floor. Contact Metav Werkzeuge today for advice on integrating the Microtech Metrology digital micrometer into existing inspection routines or for assistance with tailored data-output configurations Technical Data Article number: 110661008 GTIN: 4061905457296 Manufacturer: Microtech Metrology SKU: 110661008 Display: Colour 2.4" touchscreen Protection class: IP 65 Facts Measuring range: 75–100 mm Reading increment: 0.0001 Accuracy: 0.004 Memory capacity: 2,000 values Anvil dimensions: 6.5 x 0.75 mm Special features CNC-machined aluminium housing Wireless MICROTECH instrument connection and synchronization MICS system: On-line Graphic, Analog scale, Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction Measuring HUB: 2D mode, 2D Graph, Probe mode, Compensation Data transfer modes: Wireless to MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC, USB HID Optional MODBUS RTU (RS-485) for industrial connections Calibration certificate included (ISO 17025 (Ilac MRA)) FAQ What measuring range does the micrometer cover? The micrometer covers a measuring range of 75–100 mm, suitable for medium-sized external measurements in production and laboratory settings. Is a calibration certificate supplied with the instrument? Yes, the micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA) documenting traceability and supporting quality management requirements. Which data output options are available for automated logging? Data transfer options include wireless connection to the MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC, USB HID and an optional MODBUS RTU (RS‑485) interface for PLC integration. How does the device perform in harsh workshop environments? The micrometer features an IP65 rating and a CNC-machined aluminium housing, offering resistance to dust and spray and ensuring robust operation on the shop floor. Can the instrument store measurement series locally? Yes, the micrometer’s memory manager holds up to 2,000 values with a folder system and statistics mode to simplify traceability and export. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com