Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
125-150 mm Thread Micrometer With 125 mm Setting Gauge 60°, Analogue, Supplied In Case - Metav IndustryLine
Take advantage of precise pitch-diameter control, a 0.012 mm accuracy rating and a non‑rotating 6.5 mm spindle for consistent contact — supplied with a 125 mm 60° setting gauge and delivered in a protective case for safe handling; order the thread micrometer directly via Metav Werkzeuge or ask our consultants if needed. Thread Micrometer M309.096 — 125–150 mm, 0.012 mm accuracy (Metav IndustryLine) A precise Thread Micrometer M309.096 designed for measuring pitch diameters of large external threads in workshop and inspection environments, supplied with a 125 mm 60° setting gauge for quick verification. High accuracy ±0.012 mm Vernier reading 0.01 mm Non-rotating 6.5 mm spindle Supplied with 125 mm 60° setting gauge Delivered in protective case Consistent, measurable control of threaded parts This analogue instrument delivers repeatable measurement where pitch‑diameter control matters most. The vernier offers a 0.01 mm reading which, together with the specified accuracy of 0.012 mm, supports routine quality checks and first‑piece inspection with reliable numerical traceability. The design translates micrometre readings into a clear, verifiable result that simplifies tolerance decisions and reduces rework in production. Robust contact and handling for reliable results The micrometre's non‑rotating spindle (6.5 mm) ensures the measuring face remains stable during closing, reducing measurement scatter caused by spindle rotation. A firm but measurable contact, combined with the instrument's analogue mechanics, yields tactile feedback that experienced technicians appreciate. Supplied in a protective case, the instrument stays transport‑ready and less prone to shock or contamination between use cycles. Workshop‑ready delivery and quick setup Delivered with a 125 mm 60° setting gauge, the tool is ready for immediate calibration and verification at the bench; the gauge enables checks after transport or before critical batches. The compact weight of 1.1 kg makes handling straightforward while the instrument retains sufficient mass for stable measurements. As an analogue, vernier‑based instrument it is maintenance‑friendly and well suited to harsh shop conditions where simple robustness is prized. Choose Metav IndustryLine's thread micrometer for dependable pitch‑diameter control — contact Metav Werkzeuge for product guidance and secure supply via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: M309.096 GTIN: 4054469118215 eClass: 21170328 Tariff number: 90173000 Brand: Metav IndustryLine Core technical data Measurement range: 125–150 mm Reading / resolution: 0.01 mm Accuracy: 0.012 mm Spindle diameter: 6.5 mm Weight: 1.1 kg Special features Analogue vernier instrument Non‑rotating spindle Supplied with 125 mm 60° setting gauge Delivered in protective case FAQ How accurate is the micrometer for routine inspections? The Thread Micrometer M309.096 is specified with an accuracy of 0.012 mm and a vernier reading of 0.01 mm, making it suitable for standard workshop and inspection tasks where pitch‑diameter control is required. Is a calibration certificate included with the instrument? The product is supplied with a 125 mm 60° setting gauge for immediate verification; formal calibration certificates are provided only if stated separately in the offer or order documentation. Can the micrometer measure different thread types? The instrument is intended for external thread pitch‑diameter measurement and is appropriate for common metric and imperial external threads when used with the correct measuring faces and setting gauge. What maintenance does the micrometer require? Regular cleaning of measuring faces, light lubrication of the spindle threads, and storage in the protective case preserve measurement quality; the analogue vernier mechanism benefits from periodic inspection and careful handling. Which accessories are supplied? Delivery includes a 125 mm 60° setting gauge and a protective case for transport and storage; additional measuring faces or special anvils are available separately if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-1500mm Internal Digital Bore Gauge With IP65 Protection, ISO 17025 Calibration Certificate - Microtech Metrology
Take advantage of high measuring range, shop-floor protection and accredited calibration for consistent inspection results; the combination of IP65 dust and splash resistance, a 125–1500 mm measuring span and ISO 17025 certification ensures traceable readings in production. Order the calibrated instrument directly via Metav Werkzeuge or contact the consultants for application advice. Inside micrometre (digital) – 125–1500 mm, ISO 17025 — Microtech Metrology The Inside micrometre is a digital instrument for accurate internal diameter measurement across workshop, inspection and tooling environments, suited to large bores and long-span components. Digital display with mm/inch and HOLD IP65 protection for workshop environments ISO 17025 calibration with certificate included Measuring range 125–1500 mm; extensions available Precise internal measurement for large components This instrument is designed for reliable internal gauging over extended spans: the 125–1500 mm range covers large bores, housings and assemblies that demand reproducible results. A 0.001 mm display resolution combined with a declared accuracy of ±0.025 mm gives a clear numerical basis for pass/fail decisions and dimensional recording. The extended range reduces the need for multiple tools, improving throughput and lowering handling time when comparing several bore sizes. Traceability and quality assurance built in Delivered fully calibrated to ISO 17025, the micrometre arrives with an official calibration certificate that documents measurement uncertainty and traceability to national standards. This accreditation streamlines quality records and supports internal audits or supplier checks, making the tool suitable for incoming inspection, in-process control and final verification. The certified status removes ambiguity about instrument readiness and helps integrate the device into formal measurement systems. Robust workshop use and intuitive operation The digital readout features ON/ABS, SET, HOLD and mm/inch keys for rapid switching and stable value capture; this simplifies data recording when handling heavy or awkward parts. A friction ratchet evens out the applied measuring force, reducing operator-induced variation. With IP65 protection, the instrument resists dust and light water exposure typical of shop-floor conditions, extending service life and reducing downtime. A range of extensions (25, 50 (2), 100 (2), 200, 400 (2) mm) allows incremental span adaptation without sacrificing alignment or stiffness. For calibrated measuring certainty and specification advice, contact Metav Werkzeuge in Emmerich to request the Microtech Metrology inside micrometre with ISO 17025 certificate and discuss suitable extensions for specific applications Technical data Article number: 133800152 GTIN: 4061905041563 Manufacturer: Microtech Metrology Facts Measuring range: 125–1500 mm Resolution: 0.001 mm Accuracy: ±0.025 mm Diameter: 22 mm Protection class: IP 65 Special features Digital display with ON/ABS, SET, HOLD and mm/inch Friction ratchet ISO 17025 calibration with certificate Available extensions: 25, 50 (2), 100 (2), 200, 400 (2) mm Article classification: eClass 21170335; ETIM EC003590 FAQ What range does the instrument cover? The inside micrometre measures from 125 mm up to 1500 mm, making it suitable for large bores and extended internal spans. Is the micrometre ready for quality control on delivery? Yes, the Microtech Metrology inside micrometre is supplied fully calibrated to ISO 17025 and includes the calibration certificate. How does the friction ratchet help with measurements? The friction ratchet ensures a consistent measuring force, which reduces operator-induced variation and improves repeatability when using the micrometre. Can measurements be read in imperial units? The digital display supports mm and inch readouts with dedicated keys, plus a HOLD function for stable value capture during handling. Are length extensions available for larger spans? Extensions are available in 25, 50 (2), 100 (2), 200 and 400 (2) mm increments to extend the usable measuring span while maintaining alignment and stiffness. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-1500mm Internal Micrometer Digital, IP65, ISO 17025 Calibrated - Microtech Metrology
Combine 0.0001 mm display resolution with a robust IP65 enclosure and an ISO 17025 calibration certificate to ensure repeatable measurements on long internal diameters; the extended rod set facilitates measuring up to 1,500 mm. Order the internal micrometer directly via Metav Werkzeuge or ask our consultants for further technical clarification. Internal Micrometer – Digital internal measuring instrument, IP65, Microtech Metrology The Internal Micrometer is a digital instrument for precise internal diameter measurement across a 125–1,500 mm range, optimised for production metrology and workshop quality control. Digital display with 0.0001 mm resolution IP65 protection for dust and splash resistance ISO 17025 calibration certificate included Range 125–1,500 mm with extension rods High-resolution measurement for large bores The design delivers a fine display resolution of 0.0001 mm together with a stated accuracy of ±0.015 mm, providing reliable numeric feedback when inspecting larger internal diameters. This combination reduces statistical uncertainty in serial inspection and speeds up go/no-go decisions on the shop floor. The digital readout minimises reading errors compared with mechanical scales, which improves throughput in batch inspections while preserving the traceability required for quality control. Robust construction for workshop and production use Equipped with an IP65 rating, the unit withstands dust and light spray, allowing use close to machining centres without compromising electronics. The compact measuring head (Ø 22 mm) and modular extension rods make the instrument practical for confined bores and long shafts alike. The construction balances stiffness and reach: the long measuring range is handled by a rod system that keeps deflection low while remaining manageable for single operators or paired use when needed. Traceable calibration and easy integration into inspection routines Delivered with an ISO 17025 calibration certificate, the instrument is ready for integration into formal inspection procedures and audit trails. The included calibration certificate documents measurement uncertainty and supports compliance with internal QA systems. The extended rod set (25 mm; 50 mm ×2; 100 mm ×2; 200 mm; 400 mm ×2) allows flexible setup without additional purchases, shortening setup time and reducing tool changeover in the measuring bay. Contact Metav Werkzeuge in Emmerich for specification advice or to request a quotation for the Microtech Metrology internal micrometer (SKU 133800150); technical consultants are available by phone or email at info@metav-werkzeuge.com / +49 2822 7131930. Technical data Article number: 133800150 GTIN: 4061905100222 Manufacturer: Microtech Metrology Calibration: ISO 17025 certificate included IP protection: IP65 Digital: yes Facts Measuring range: 125–1,500 mm Resolution (display): 0.0001 mm Accuracy: ±0.015 mm Measuring head diameter: 22 mm Special features Digital readout for reduced reading error Extension rods: 25 mm; 50 mm (2); 100 mm (2); 200 mm; 400 mm (2) Delivered calibrated to ISO 17025 Rated for dusty and splash-prone environments (IP65) Suited to long-range internal diameter inspection (long category) FAQ What measuring range does the instrument cover? The Microtech Metrology internal micrometer (SKU 133800150) covers a measuring range from 125 mm to 1,500 mm with the supplied extension rods. What resolution and accuracy can be expected? Resolution is 0.0001 mm on the digital display and the device specification lists an accuracy of ±0.015 mm. Is the instrument supplied calibrated? Yes, the instrument is delivered with an ISO 17025 calibration certificate, documenting traceable calibration and measurement uncertainty. Can the micrometer be used near machining centres? The IP65 rating protects the electronics against dust and spray, making the device suitable for use close to machining operations, provided standard local precautions are observed. Which extensions are included and how do they affect measurements? The supplied extension set includes 25 mm; 50 mm (2); 100 mm (2); 200 mm; 400 mm (2). Extensions increase reach while the specification accounts for accuracy across the stated measuring range. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-150mm Digital Bench Micrometer With Non-Rotating Spindle 0.001mm Resolution, Supplied With Seven Replaceable Anvils, Includes Case - Metav IndustryLine
The combination of 0.001 mm readout, a non-rotating spindle and a ratchet stop ensures repeatable, high-precision external measurements for medium-sized components; order the micrometer via Metav Werkzeuge or consult the advisors for specification support. Digital Uni-Micrometer M302.045.D — Digital micrometer, 125–150 mm, 0.001 mm resolution (Metav IndustryLine) The Digital Uni-Micrometer M302.045.D is a workshop-grade digital micrometer for precise external measurement of medium-sized parts, delivering fine resolution and repeatable contact control for production and inspection environments. 0.001 mm resolution for high precision 125–150 mm range for medium components Non-rotating spindle for repeatable readings Supplied with seven special measuring inserts Consistent accuracy for production and inspection Equipped with a 0.001 mm display resolution and a factory-calibrated accuracy class indicated by its specifications, this micrometer gives a clear advantage where small tolerances matter. The non-rotating spindle prevents rotation of the workpiece during measurement, which reduces measurement scatter and preserves surface finishing. A built-in ratchet ensures consistent contact force, translating fine numerical precision into reliable, repeatable readings on the shop floor and in quality control. Practical handling and adaptable measuring range With a measuring span of 125–150 mm, the instrument sits in the Standard class for calipers and micrometres, offering the best compromise of reach and stiffness for common machining tasks and fixture checks. The device includes seven special measuring inserts, enabling rapid adaptation to different geometries without requiring additional tooling. The digital display provides ON/OFF, ABS/INC, UNIT and SET functions for straightforward measurement modes and quick switching between metric and incremental readouts. Robust build and organised delivery for everyday use Constructed with a painted frame and a matt chrome-plated measuring drum, the device resists everyday workshop wear while remaining straightforward to handle. The delivery in a protective case supports safe transport and tidy storage of the micrometer and its inserts. The digital output is provided via RB 4.1, facilitating data capture for statistical process control or documentation when connected to compatible data-logging systems. Contact Metav Werkzeuge for precise ordering advice or specification queries regarding the Metav IndustryLine digital micrometer M302.045.D and its measuring inserts Technical data Article number: M302.045.D GTIN: 4054469114279 Manufacturer: Metav IndustryLine Range: 125–150 mm Resolution: 0.001 mm Display: digital (ON/OFF, ABS/INC, UNIT, SET) Output: RB 4.1 Weight: 1.1 kg Facts Measuring range: 125–150 mm Readout resolution: 0.001 mm Accuracy: ±0.012 mm Spindle diameter: 6.5 mm Measuring inserts: 7 pairs included Weight: 1.1 kg Special features Non-rotating spindle for repeatable external measurement Ratchet stop for consistent contact force Frame painted, measuring drum matt chrome-plated Delivered in transport case Factory standard (Werksnorm) Digital data output RB 4.1 Seven pairs of special measuring inserts included FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 125–150 mm, making it suitable for medium-sized components in the Standard class. Is the spindle non-rotating and why is that important? Yes, the spindle is non-rotating; this prevents rotation of the workpiece during measurement and improves repeatability with the Digital Uni-Micrometer M302.045.D. Are measuring inserts included and how many? The instrument is supplied with seven pairs of special measuring inserts, allowing flexible adaption to various workpiece shapes. Can measurement data be exported for documentation? The micrometer provides a digital output via RB 4.1, enabling connection to compatible data-logging systems for documentation and SPC workflows. Does the micrometer include a protective case for transport? Yes, the tool is delivered in a protective case to secure the instrument and its inserts during transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Digital Micrometer 0.005mm Accuracy Color 2.4" Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
The combination of an ISO 17025 calibration certificate, 0.005 mm accuracy and wireless data transfer ensures reliable, traceable measurements and faster workflow integration. Order the micrometer directly via Metav Werkzeuge or contact our consultants for application-specific configuration. Digital Micrometer (125–150 mm) — 0.005 mm accuracy, Wireless + USB (Microtech Metrology) A digital micrometer designed for standard workshop and machine‑shop dimensional checks across the 125–150 mm range, offering calibrated accuracy and modern data connectivity. ISO 17025 calibration certificate included High precision: 0.005 mm accuracy Wireless and USB data output 2.4" colour touchscreen display Repeatable accuracy for routine quality control This instrument delivers laboratory‑grade repeatability in a workshop‑friendly format. With a guaranteed accuracy of 0.005 mm and a display resolution of 0.0001 mm, the device reduces measurement uncertainty on critical components. Classified as Standard class (125–150 mm), it combines reach and stiffness for common machine‑shop tasks. The non‑rotating measuring spindle minimises thread friction and measurement errors, so results remain consistent even during repeated checks. Seamless digital transfer to speed up inspection workflows Equipped with Wireless and USB data output, the micrometer removes manual transcription and enables direct capture of measurement data into SPC software or inspection reports. The 2.4" colour touchscreen simplifies on‑device operations, allowing clear visual confirmation of readings and fast unit changes. Integrated digital transfer improves throughput and traceability in production environments, helping to reduce process deviations and administrative overhead. Practical delivery and workshop compatibility Supplied fully calibrated to ISO 17025 with certificate, the tool arrives ready for use in formal quality procedures and audit trails. The measuring range of 125–150 mm is ideal for standard components, fixtures and medium‑sized parts. Note that an anvil with ball is not included; this permits flexible choice of contact geometry per application. Durable digital mechanics and the non‑rotating spindle support long service life and low maintenance, backed by Metav’s quality‑filter approach for dependable supply to European workshops. For precision tasks requiring ISO 17025 traceability and modern data connectivity, request the Microtech digital micrometer (SKU 110741508) from Metav Werkzeuge — our specialists in Emmerich will advise on interface setup and dispatch options Technical Data Article number: 110741508 GTIN: 4061905458002 Manufacturer: Microtech Metrology ECLASS: 21170328 Digital display: Color 2.4" touchscreen Data output: Wireless + USB Facts Accuracy: 0.005 mm Resolution: 0.0001 mm Measuring range: 125–150 mm Display type: Colour touchscreen Calibration: ISO 17025 certificate included Special features Digital micrometer, workshop format Non‑rotating measuring spindle Wireless data transfer USB data interface Anvil with ball not included Supplied calibrated to ISO 17025 FAQ Is this micrometer supplied calibrated? Yes. The micrometer from Microtech Metrology (SKU 110741508) is delivered fully calibrated with an ISO 17025 certificate suitable for laboratory and traceable quality processes. What measuring range and class does this instrument cover? The instrument covers 125–150 mm, placing it in the Standard class for machine‑shop use where a balance of reach and rigidity is required. How can measurement data be exported from the device? Measurement values can be transferred via Wireless connection or USB, allowing integration with inspection software or direct logging to data collection systems. What level of precision is achievable in daily use? Expect an accuracy of 0.005 mm with a display resolution of 0.0001 mm, which is suitable for demanding workshop quality control and production inspection tasks. Is an anvil with ball included in the delivery? No. The anvil with ball is not included, allowing selection of the best contact geometry for the measured part. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-150mm Digital Micrometer Friction Ratchet 0.001mm Resolution, RB6 Data Output, Plastic Case - Metav IndustryLine
Efficient, traceable measurement is achieved by combining ultra-fine 0.001 mm resolution with a friction ratchet and an RB 6 data interface; this reduces rework and accelerates inspection throughput. Order the Digital Micrometer directly via Metav Werkzeuge or consult the Metav team for integration advice. Digital Micrometer M302.079 — 125–150 mm, 0.001 mm resolution, friction ratchet, RB 6 The Digital Micrometer M302.079 is a workshop-grade precision instrument for external dimension measurement in production, inspection and quality-control workflows. 0.001 mm digital resolution Friction ratchet for consistent measuring force RB 6 data output for traceable transfers Hardened measuring faces 6.5 mm Supplied in protective case Achieve repeatable high-precision readings The instrument delivers 0.001 mm readout on a clear digital display, providing a level of fineness commonly required for precision engineering applications. With its conformity to DIN 863, the device supports consistent inspection criteria across incoming and outgoing quality checks. The fine resolution shortens decision loops in the workshop: fewer manual calculations, quicker go/no-go assessments and reduced scrap rates thanks to immediate, reliable numbers that can be integrated into quality records. Consistent contact force for reliable measurements A built-in friction ratchet ensures a controlled measuring force so the contact pressure remains constant between consecutive measurements. This mechanical aid reduces operator-related variation, improving repeatability for serial checks. The hardened measuring faces (6.5 mm) resist wear and keep contact geometry stable over time, which supports dependable long-term accuracy for the standard measuring range of 125–150 mm used across general machine‑shop tasks. Streamlined data capture and traceability Equipped with an RB 6 data output, the gauge enables direct digital transfer of readings into SPC systems or inspection software, lowering transcription errors and accelerating documentation. The meter’s control panel offers ON/OFF/SET, DATA, mm/inch and zero functions for quick switching between units and straightforward zeroing procedures. This combination of features supports efficient data workflows and makes the instrument suitable for automated logging in medium-volume production environments. Designed for workshop handling and transport Built to be practical in everyday use, the micrometer is supplied in a protective case to simplify storage and transport between bench and inspection station; the robust construction and a nominal weight of 1.6 kg make it readily portable without compromising stability. As a standard-range device it balances reach and stiffness, offering a user-friendly handling experience while covering the majority of external-dimension tasks in metalworking and component manufacturing. Contact Metav Werkzeuge for application guidance and secure delivery from Emmerich — request the Digital Micrometer M302.079 with RB 6 output for your inspection bench Technical Data SKU: M302.079 GTIN: 4054469168845 eClass: 21170328 ETIM: EC003590 Customs tariff number: 90173000 Norm: DIN 863 Facts Measuring range: 125–150 mm Reading / resolution: 0.001 mm Measuring faces width: 6.5 mm Weight: 1.6 kg Digital: yes Special features Friction ratchet mechanism Data output: RB 6 Display functions: ON/OFF/SET, DATA, mm/inch, zero Hardened measuring faces Supplied in protective case FAQ Is the micrometer suitable for routine quality-control tasks? Yes. The Digital Micrometer M302.079 from Metav IndustryLine is designed for routine inspection work in machine shops and QA departments, offering a fine 0.001 mm resolution and a stable measuring force via the friction ratchet. How does the RB 6 data output integrate with existing systems? The RB 6 interface on this micrometer supports wired transfer of measured values into SPC or inspection software, reducing manual entry and improving traceability for M302.079 readings. Are the measuring faces hardened to resist wear? Yes. The device features hardened measuring faces (6.5 mm) to maintain contact geometry and prolong service life under regular workshop use. Can the display switch between metric and imperial units? The digital display supports mm/inch switching and includes zero setting and data transmission keys for flexible operation in mixed‑unit environments. What measuring range classification does this instrument fall into? With a maximum range of 150 mm, the micrometer is classified as a Standard instrument, offering the best compromise of reach, stiffness and one‑hand operability for general metalworking applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Groove Micrometer With 0.01mm Scale, Friction Ratchet, Non-Rotating Spindle, Case - Metav IndustryLine
Benefit from a precise combination of a 125–150 mm measuring range, 0.01 mm reading increment and a friction ratchet that ensures repeatable contact pressure; order directly via Metav Werkzeuge for reliable workshop supply or consult our specialists for application advice. M307.026 Groove Micrometer — 125–150 mm range, 0.01 mm graduation (Metav IndustryLine) A M307.026 Groove Micrometer engineered for accurate slot and groove measurement in metalworking and toolmaking, offering workshop‑grade mechanics and repeatable results in routine quality checks. 125–150 mm measuring range 0.01 mm graduation Friction ratchet for consistent contact Non-rotating spindle reduces wear Repeatable precision for routine inspection The micrometer delivers 0.01 mm graduation with an industrial accuracy of ±0.008 mm, providing a dependable basis for pass/fail decisions and process control. The fine 0.5 mm spindle pitch converts rotation into small axial movement, giving consistent incremental control when closing on a groove. For production environments where reproducibility matters, the mechanical design prioritises repeatable contact pressure and low measurement scatter, reducing the need for secondary checks and saving inspection time. Design tailored to groove and slot measurement Constructed as an analog micrometer for slot measurement, the instrument features measuring faces sized 0.75 x 6.5 mm, which concentrate contact on the groove flanks for reliable evaluation of slot widths and step depths. The non‑rotating spindle preserves the measuring faces from rotational wear and helps maintain zero stability over longer use. This configuration is particularly suitable for the common workshop classification of instruments: the device falls within the standard range (up to 300 mm), offering the best compromise between reach and stiffness for everyday machine‑shop tasks. Mechanical features that improve daily workflow A built‑in friction ratchet ensures the same end‑point force every time, which is crucial for analogue gauges where human variation can introduce error. The combination of a clear 0.01 mm increment and the ratchet mechanism reduces operator influence on readings, which speeds up routine checks and increases confidence in results. The robust spindle geometry and precise thread translate into low backlash and smooth advance, meaning fewer re‑measurements and faster throughput on inspection benches. Practical handling, maintenance and integration The micrometer’s simple mechanical operation requires minimal training: the spindle advances with a calibrated pitch and the vernier/reading system indicates fine deviations at the 0.01 mm level. Periodic cleaning of the measuring faces and light lubrication of the thread will sustain measurement quality; in the event of wear, the non‑rotating spindle design limits abrasive abrasion to the faces rather than the spindle. For integration into inspection routines, the instrument pairs well with standard inspection protocols and bench fixtures common in toolmaking and maintenance departments. For workshop procurement or application guidance on the Metav IndustryLine groove micrometer, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and order handling Technical data Article number: M307.026 GTIN: 4054469117317 Category: Micrometers Tariff number: 90173000 Facts Measuring range: 125–150 mm Resolution / reading increment: 0.01 mm Accuracy: ±0.008 mm Spindle pitch: 0.5 mm Measuring faces: 0.75 x 6.5 mm Type: Analog micrometer for groove measurement Special features Friction ratchet Non-rotating spindle Setting reference: from 25–50 mm Mechanical vernier-style reading FAQ How accurate is the instrument for fine groove measurements? The micrometer provides a reading increment of 0.01 mm and an accuracy of ±0.008 mm, suitable for precision checks and routine quality control in workshops. Which measurement tasks is this instrument designed for? It is intended for slot and groove measurement in machine‑ and toolmaking; the 125–150 mm range covers common workshop components where stiffness and reach are required. What benefit does the friction ratchet provide? The friction ratchet standardises the contact force at the end of the measurement, reducing operator‑induced variation and improving repeatability of readings. Why is a non‑rotating spindle advantageous? A non‑rotating spindle limits wear on the measuring faces and maintains measurement stability over time, prolonging the instrument’s reliable service life. How should the micrometer be maintained to retain accuracy? Regular cleaning of the measuring faces and light lubrication of the spindle thread are recommended to maintain the instrument’s mechanical smoothness and measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Micro Screw Gauge With Microcomputer Thread Measurement, Colour 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable calibration, high repeatability and modern data transfer to speed up thread inspection and reduce rework. The ISO 17025‑calibrated instrument with ±0.005 mm accuracy and Wireless + USB output ensures reliable results for production and quality control; order directly via Metav Werkzeuge or consult our technical advisors for integration advice. Whitworth 55 Thread Micrometer by Microtech Metrology — Digital, 2.4″ colour touchscreen The Whitworth 55 Thread Micrometer is a workshop‑grade, digital measuring instrument designed for precise inspection of Whitworth threads in standard machine‑shop and metrology lab environments. Digital 2.4″ colour touchscreen display Wireless and USB data output ISO 17025 calibrated with certificate Accuracy ±0.005 mm for repeatable results Reliable, traceable precision for production control The instrument delivers ±0.005 mm measurement accuracy, placing it in the high‑precision range required for critical thread inspection and fine quality control. Supplied ISO 17025 calibration means the device is delivered with a certified calibration report suitable for audit trails and incoming inspection documentation. With a 125–150 mm measurement range, the device sits in the Standard class (100–300 mm), offering the best balance of reach and rigidity for shop floor applications where repeatable results minimise scrap and rework. Fast capture and seamless data handling to streamline QA Equipped with a 2.4″ colour touchscreen and both Wireless and USB outputs, the instrument enables quick set‑up, intuitive operation and immediate data transfer to inspection software or SPC systems. The non‑rotating spindle reduces angular error during thread contact, improving measurement consistency when comparing batches. Included anvils 60‑3.5 TPI match the Whitworth 55 profile, allowing direct verification of threaded parts without additional adapters. Built for everyday workshop use with professional ergonomics Designed for frequent use on the shop floor, the micrometer combines a robust digital readout with simple controls to keep cycle times low and operator fatigue to a minimum. The digital format removes manual reading errors and, together with wireless connectivity, reduces paperwork and traceability gaps. The sturdy construction and precision spindle provide confidence when inspecting components for assembly or final inspection, supporting a smoother production flow and better supplier acceptance rates. For application advice, calibration details or to reserve the ISO 17025‑calibrated Whitworth 55 Thread Micrometer via Metav Werkzeuge, please contact our specialists in Emmerich for tailored assistance and fast delivery. Technical Data SKU: 110721508 GTIN: 4061905456817 Manufacturer: Microtech Metrology Type: Whitworth 55 Facts Measurement range: 125–150 mm Accuracy: ±0.005 mm Display: Colour 2.4″ touchscreen Data output: Wireless + USB Calibrated: ISO 17025 certificate included Special features Non‑rotating spindle Digital instrument Included accessories: 10x anvils 60‑3.5 TPI (Whitworth 55) Suitable for standard workshop and laboratory thread inspection FAQ How accurate is the micrometer and is the calibration traceable? The Whitworth 55 Thread Micrometer provides an accuracy of ±0.005 mm and is delivered with an ISO 17025 calibration certificate from Microtech Metrology, suitable for documented quality systems. Can measurement data be exported to inspection software? Yes, the device offers Wireless and USB outputs for direct transfer of measurement data to SPC or inspection software, reducing transcription errors. What measurement range does the instrument cover and how is it classified? The instrument measures from 125–150 mm, placing it in the Standard class (100–300 mm), which is optimised for general machine‑shop and metalworking inspection tasks. Are Whitworth thread gauges included for immediate use? The delivery includes 10x anvils 60‑3.5 TPI matched to Whitworth 55, enabling immediate verification of corresponding threaded parts. Does the spindle rotate during measurement and why does that matter? The micrometer features a non‑rotating spindle, which reduces torsional and angular errors during contact and improves repeatability for thread measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-150mm Micrometer Caliper With Ratchet 0.01mm Reading Blue Powder Coated, DIN 863 Plastic Case - Metav IndustryLine
Take advantage of a robust workshop micrometer that combines 0.01 mm resolution with a ratchet stop and DIN 863 conformity for repeatable measurements; order the instrument directly via Metav Werkzeuge or request advice from our consultants if necessary. Micrometer M304.413 – Outside micrometer, 125–150 mm with 0.01 mm ratchet The Micrometer M304.413 is an outside micrometer designed for industrial workshop and quality‑control use, offering a measuring range from 125 mm to 150 mm and fine 0.01 mm graduation for repeatable dimensional checks. Ratchet stop for repeatable pressure 0.01 mm graduation for fine readings DIN 863 compliance for reliable measuring Blue powder-coated frame with matt chrome drum Reliable fine measurement for larger components The instrument provides a measuring range of 125–150 mm combined with a 0.01 mm graduation, which makes it well suited to precise external size checks on shafts, flanges and assemblies where coarse calipers are insufficient. The ratchet stop stabilises contact force so readings are less dependent on operator pressure; this reduces variability between measurements and increases throughput in routine inspection tasks. With a spindle pitch 0.5 mm, the screw advance follows established micrometer mechanics, ensuring predictable incremental movement and straightforward interpretation of the mechanical scale. Durable construction built for the workshop A powder‑coated frame in blue provides corrosion resistance and impact protection, while the measuring drum is matt chrome‑plated to minimise glare and wear. The instrument features hardened measuring faces, which resist surface damage during repeated contact and help preserve long‑term accuracy in a production environment. The combination of robust finishing and hardened contact surfaces means the gauge remains serviceable with minimal maintenance, supporting continuous use on the shop floor or in a departmental inspection bay. Intuitive handling for consistent results Mechanical operation and a clear analogue scale keep the micrometer straightforward to use without batteries or electronics. The ratchet stop and fine spindle geometry facilitate repeatable contact and help avoid over‑tightening; that repeatability is valuable when several operators perform the same inspection routines. The instrument’s ergonomic frame and defined spindle advance contribute to fast cycle times for batch measurements, while the analogue display remains reliable in demanding ambient conditions where electronic readouts might be vulnerable. Suitable for standardised workshop measurement routines Compliance with DIN 863 places the micrometer within recognised workshop norms and supports integration into established quality workflows. The tool’s classification as an outside micrometer for external dimensioning is clear, and its mechanical design follows long‑standing metrology practice, making it compatible with routine control plans and inspection protocols. Identification details such as SKU and GTIN enable traceability within procurement and asset‑management systems. Contact Metav Werkzeuge for tailored advice on integrating the Micrometer M304.413 into inspection routines or to obtain delivery and logistics information through their Emmerich hub Technical data SKU: M304.413 GTIN: 4054469116921 Category: Messschrauben Norm: DIN 863 Facts Measuring range: 125–150 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle Ø: 6.5 mm TARIC code: 90173000 Special features Frame: blue powder-coated Measuring drum: matt chrome-plated Hardened measuring faces Ratchet stop for repeatable pressure Analog operation (mechanical) FAQ How precise is the Micrometer M304.413 for routine inspections? The Micrometer M304.413 provides a resolution of 0.01 mm and a mechanical design that supports consistent readings suitable for standard workshop inspection tasks. Are the measuring faces hardened to resist wear? Yes, the Micrometer M304.413 is specified with hardened measuring faces to maintain accuracy under repeated contact and minimise the need for early refurbishment. Which dimensions and components are best measured with this instrument? The 125–150 mm measuring range of the Micrometer M304.413 is aimed at external measurements such as shafts, collars and flanges where a larger micrometer is required. How does the ratchet stop contribute to measurement quality? The ratchet stop fitted to the Micrometer M304.413 ensures a uniform contact pressure at closure, improving repeatability between operators and reducing measurement scatter. Is the micrometer suitable for use within standardised inspection routines? Yes, the Micrometer M304.413 conforms to DIN 863 and is compatible with standard workshop quality procedures and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Micrometer With 35mm Flat Anvils Touchscreen, Wireless USB, ISO 17025 Calibration - Microtech Metrology
Take advantage of high traceability and modern connectivity combined with robust measuring faces for reliable shop‑floor measurement. The combination of ISO 17025 calibration and Wireless + USB data output supports seamless integration into quality workflows — order directly via Metav Werkzeuge or consult our specialists for configuration advice. Micrometer — 125–150 mm, Wireless + USB (Microtech Metrology) The micrometer is a digital measurement instrument for standard workshop and inspection tasks, offering a 125–150 mm measuring range with large Ø35 mm measuring plates and integrated data output. 1.54" touchscreen display Wireless and USB data output ISO 17025 calibration certificate included Ø35 mm measuring plates for stable contact Reliable accuracy for repeatable measurements This digital instrument delivers an accuracy of 0.007 mm and a display resolution of 0.0001 mm, which together reduce uncertainty in routine checks. Classified in the Standard range (100–300 mm), the device balances reach and stiffness, making it suitable for general machine‑shop and metalwork inspection. The large Ø35 mm measuring plates increase contact area, improving stability on uneven surfaces, while the non‑rotating spindle helps maintain consistent seating and reduces wear on the workpiece. These design choices translate into fewer remeasurements and smoother quality control cycles. Modern data handling and traceable calibration Equipped with a 1.54" touchscreen and Wireless + USB interfaces, the micrometer transfers readings directly to inspection software or data loggers, reducing transcription errors and saving time during batch inspections. The tool is supplied fully calibrated under ISO 17025, with an official calibration certificate for audit trails and production documentation. Integration into digital workflows supports faster reporting and straightforward archiving of measurement results, which is particularly valuable for regulated environments and serial production. Practical design for efficient workshop use Ergonomics and robustness meet digital convenience: the compact touchscreen provides clear readouts, while the broad measuring faces ensure secure contact on a variety of geometries. The instrument’s features are focused on operational efficiency — rapid visual checks via the digital display, consistent axial alignment from the non‑rotating spindle, and seamless data export for quality records. Confidence in measurement quality is reinforced by the supplied calibration documentation, making the device a dependable addition for technicians and inspection teams aiming to increase throughput without sacrificing reliability. Contact Metav Werkzeuge for tailored technical advice and ISO 17025 documentation for Microtech Metrology micrometers — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 110781507 GTIN: 4061905457487 Manufacturer: Microtech Metrology Digital display: Touchscreen 1.54" Data output: Wireless + USB Measuring faces: Plate Ø35 mm Non‑rotating spindle Category: Micrometers Facts Measuring range: 125–150 mm Display resolution: 0.0001 mm Stated accuracy: 0.007 mm Measuring plate diameter: Ø35 mm Special features Digital micrometer with touchscreen Wireless data transmission and USB ISO 17025 calibration certificate included Robust measuring plates for improved contact Non‑rotating spindle for consistent seating FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 125–150 mm, placing it in the Standard class suitable for general machine‑shop and metalwork measurements. Is a calibration certificate supplied with the instrument? Yes, the instrument is delivered fully calibrated under ISO 17025 and includes the corresponding calibration certificate for traceability. How are measurement values exported from the device? Measurement values can be exported via Wireless transmission or USB, allowing direct input into inspection software or data acquisition systems. What advantage do the Ø35 mm measuring plates provide? The Ø35 mm plates increase contact area and stability on uneven surfaces, improving repeatability and reducing the likelihood of measurement scatter. Does the spindle rotate during measurement? No, the spindle is designed not to rotate, which helps maintain consistent contact and reduces surface damage on sensitive workpieces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-150mm Micrometer With Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated, Metric 60 Anvils Included - Microtech Metrology
Take advantage of precise measurement, reliable connectivity and ISO 17025 calibration for reproducible QA results; the combination of ±0.005 mm accuracy, Wireless + USB data output and a 2.4" colour touchscreen ensures efficient integration into production control. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Digital micrometer — 125–150 mm range, 2.4" colour touchscreen (Microtech Metrology) Digital micrometer for high‑accuracy external measurements in workshop and quality environments, supplied with calibration certificate and a set of interchangeable anvils. Colour 2.4" touchscreen display ISO 17025 calibrated with certificate Wireless and USB data output Accuracy ±0.005 mm with non-rotating spindle Consistent measurement quality and traceable calibration The digital gauge delivers repeatable results by combining a stable measuring spindle with a high‑resolution readout. The device is ISO 17025 calibrated and supplied with a calibration certificate, which documents traceability for internal quality control or audit purposes. With a stated accuracy of ±0.005 mm and a display resolution of 0.0001 mm, the instrument supports tight tolerance checks and reduces rework through reliable pass/fail decisions. Faster data capture and seamless workflow integration Equipped with both Wireless and USB data output, the instrument enables automated data logging and direct transfer to SPC or inspection software, cutting manual recording time. The 2.4" colour touchscreen simplifies menu navigation and unit selection, while digital transfer reduces transcription errors — a clear efficiency gain for busy inspection benches and shopfloor stations. Robust mechanics and adaptable measuring options Mechanical design features such as the non-rotating spindle reduce wear on the thread and improve contact stability, which helps maintain long‑term measurement reproducibility. The micrometer comes with 6x anvils 0.4–7 mm (Metric 60) for small‑diameter checks, extending the usable measuring range of the instrument and making it suitable for a variety of external diameters without auxiliary tooling. Practical benefits for production and quality teams By combining high resolution, certified calibration and flexible connectivity, the instrument supports faster decision cycles and clearer documentation in incoming inspection or final assembly control. The compact digital format is well suited to bench use or portable checks, and the included calibration certificate ensures that recorded measurements meet regulatory and customer requirements without additional calibration steps. Contact Metav Werkzeuge today for a technical consultation or to confirm specification compatibility with current inspection systems — Metav Werkzeuge can advise on integration and supply the certified micrometer directly. Technical Data Article number: 110711508 GTIN: 4061905456930 Manufacturer: Microtech Metrology Core specifications Measurement range: 125–150 mm Resolution: 0.0001 mm Accuracy: ±0.005 mm Display: 2.4" colour touchscreen Data output: Wireless, USB Special features ISO 17025 calibrated (calibration certificate included) Non-rotating spindle 6x anvils 0.4–7 mm (Metric 60) Digital instrument for external measurements FAQ What measurement range does this micrometer cover? The micrometer from Microtech Metrology covers a measuring range of 125–150 mm and is supplied with the specified set of interchangeable anvils. Is the instrument delivered calibrated and traceable? Yes — the device is delivered fully calibrated according to ISO 17025 and includes a calibration certificate with traceability information. How can measurement data be exported from the instrument? Measurement values can be exported via the instrument's Wireless interface or through USB, enabling direct transfer to inspection software or data collection systems. Which accessories are included for small‑diameter measurements? The scope of delivery includes 6x anvils 0.4–7 mm (Metric 60), which extend capability for smaller external diameters without additional tooling. What ensures long‑term repeatability of readings? Mechanical design elements such as the non‑rotating spindle, combined with digital readout and certified calibration, contribute to stable, repeatable measurements suitable for quality control tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-150mm Micrometer With Ratchet Stop, ISO 17025 Calibration Certificate Included - Microtech Metrology
High-precision external measurement capability is provided by a declared accuracy of ±0.004 mm together with a ratchet stop for consistent measuring force; an ISO 17025 calibration certificate is included to ensure traceable results. Order the micrometer directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Micrometer (Outside Micrometer) 125–150 mm — Ratchet Stop, Calibrated (ISO 17025) A precision micrometer designed for reliable external measurements in inspection and workshop environments, covering the 125–150 mm measuring range. High accuracy ±0.004 mm Ratchet stop micrometer head Supplied with ISO 17025 calibration certificate Measuring range 125–150 mm Reduce rework with measurement certainty The declared ±0.004 mm accuracy translates into fewer rejects and less rework on precision parts, making this instrument a pragmatic choice for production or incoming inspection. The analogue design provides a familiar tactile feedback while the ratchet stop ensures a consistent measuring force, reducing operator‑dependent variation. The scale resolution of 0.01 mm supports routine quality control tasks where fast, repeatable readings are required, and the included calibration certificate documents traceability for audit purposes. Built for dependable workshop performance With a measuring span of 125–150 mm and an anvil diameter of Ø6.5 mm, the instrument is sized for medium workpieces such as housings, shafts and assemblies. The analogue mechanism is robust where repeatable mechanical action is preferred over electronic electronics, and the ratchet head protects the spindle from over‑torque while giving reproducible contact pressure. This combination helps maintain accuracy over long series of measurements and lowers the need for frequent adjustment. Improve inspection throughput and consistency Consistent measurement technique is promoted by the ratchet stop and clear analogue scale, which together reduce operator influence and speed up cycle times during batch inspection. Traceable calibration to ISO 17025 (Ilac MRA) provides demonstrable confidence in measurement results, supporting quality documentation and supplier control. For operations where throughput and documented conformity matter, the instrument delivers the practical balance between precision and day‑to‑day usability. Calibration and procurement clarity for quality management An ISO 17025 calibration certificate is supplied with the instrument, confirming laboratory‑grade calibration and traceability; this simplifies acceptance into controlled inspection systems and reduces administrative overhead during audits. The analogue external micrometer is therefore suitable where documented measurement confidence is a procurement requirement and where a mechanical instrument is preferred for its longevity and low maintenance. For precise measurement needs, request this Microtech Metrology micrometer via Metav Werkzeuge and benefit from technical advice and rapid supply from our Emmerich quality hub; contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support Technical Data Article number: 110111501 GTIN: 4061905459160 Manufacturer: Microtech Metrology Type: Outside micrometer (analogue) Core specifications Measuring range: 125–150 mm Resolution/readability: 0.01 mm Accuracy: ±0.004 mm Anvil diameter: Ø6.5 mm Display type: Analogue (non‑digital) Special features Ratchet stop micrometer head Supplied with ISO 17025 calibration certificate (Ilac MRA) Analogue construction for robust workshop use FAQ What accuracy can be expected from the micrometer? The micrometer delivers a declared accuracy of ±0.004 mm; this level of precision is suitable for stringent inspection tasks and is supported by the supplied ISO 17025 calibration certificate. Is a calibration certificate included with delivery? Yes, the micrometer is delivered with an ISO 17025 calibration certificate that documents traceability and supports quality management systems. Which measuring range does the instrument cover? The instrument covers the 125–150 mm measuring band, making it suitable for medium‑sized components such as shafts, housings and assemblies. Does the ratchet stop improve measurement consistency? The ratchet stop on the micrometer provides a repeatable measuring force, which reduces operator variability and improves repeatability across multiple measurements. Who is the manufacturer and what is the SKU for ordering? The micrometer is manufactured by Microtech Metrology and can be ordered under SKU 110111501; supply and local support are coordinated via Metav Werkzeuge. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-150mm Three-Point Dial Micrometer With 30mm Anvil, Ratchet, Painted Frame, Matt Chrome Dial, Supplied In Case - Metav IndustryLine
Take advantage of precise mechanical measuring with consistent contact force and robust datum surfaces: the micrometer’s ±0.006 mm accuracy and 0.01 mm resolution deliver reliable size control across the shop, while the ratchet stop and non‑rotating spindle ensure repeatable readings. Order directly via Metav Werkzeuge or consult the specialists for application advice. Micrometer M309.255 – Disc‑face micrometer, 125–150 mm, Ø30 mm anvils (Metav IndustryLine) The Micrometer M309.255 is a standard‑range disc‑face micrometer designed for workshop dimensional checks and production quality control, offering a stable contact area and consistent measuring force for medium‑sized components. Standard range 125–150 mm Ø30 mm disc measuring faces Non‑rotating spindle with ratchet stop Supplied in transport box Precision where repeatability matters This analogue micrometer combines a fine 0.01 mm graduation with a verified ±0.006 mm accuracy to support controlled tolerance checks in machining and inspection. The combination of a non‑rotating spindle and a ratchet stop reduces measurement scatter caused by variable hand pressure, producing more reproducible values across repeated checks. The sizeable Ø30 mm disc measuring faces spread contact pressure and provide a stable datum on flat or lightly contoured workpieces, which helps when verifying critical diameters or faces. Designed for reliable handling and consistent results A painted frame gives the gauge robust protection against workshop wear while the matt‑chromed thimble improves legibility under bright lights. The ratchet mechanism limits the applied measuring force, which safeguards delicate parts and reduces operator influence on readings. As an analogue instrument with a clear mechanical drum, this device lends itself to fast spot checks without the need for batteries, supporting rapid throughput in production or incoming inspection tasks. Integrating into standard workshop workflows Classified as a standard‑range instrument (125–150 mm), this micrometer is sized to cover the typical needs of machine shops, tool rooms and quality control benches where reach and stiffness must be balanced. Supplied in a transport box, it arrives ready for secure storage and safe transfer between workstations or to the inspection bench. The construction and measuring specification make it suitable for routine dimensional control of components within its range, supporting process stability and traceable measurement routines. Contact Metav Werkzeuge for tailored advice on integrating the M309.255 into inspection routines and for delivery from Emmerich to your workshop Technical data SKU: M309.255 GTIN: 4054469118741 Measuring range: 125–150 mm Resolution: 0.01 mm Accuracy: ±0.006 mm Weight: 1.6 kg Display type: Analogue Ratchet stop: Yes Spindle: Non‑rotating Measuring faces: Ø30 mm disc Frame finish: Painted Thimble finish: Matt chrome Numbers / Core technical data Measuring range min: 125 mm Measuring range max: 150 mm Resolution (graduation): 0.01 mm Stated accuracy: ±0.006 mm Weight: 1.6 kg Tariff code: 90173000 Special features Disc‑shaped measuring faces for stable contact Ratchet stop for consistent measuring force Non‑rotating spindle to protect measured surfaces Painted frame for workshop durability Matt‑chromed thimble for improved readability Supplied in transport box for safe storage and transfer FAQ What is the measuring range of this micrometer? The measuring range is 125–150 mm for the Micrometer M309.255, classified as a standard‑range instrument suitable for typical machine‑shop tasks. What resolution and accuracy can be expected? Resolution is 0.01 mm and the micrometer achieves an accuracy of ±0.006 mm, which supports precise dimensional checks in production and inspection. How does the ratchet stop influence measurement results? The ratchet stop on the Micrometer M309.255 limits the applied measuring force, promoting repeatable contact pressure and reducing operator‑induced variation between measurements. Are the measuring faces suitable for flat and slightly curved surfaces? Yes, the Ø30 mm disc measuring faces provide a stable contact area that is well suited to flat surfaces and light contours, improving repeatability compared with smaller anvils. Is the spindle rotating during measurement? No, the spindle is non‑rotating, which prevents surface marking and helps maintain consistent contact geometry during sizing operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Three-Point Inside Micrometer Self-Centring, 0.008mm Accuracy, Supplied in Case - Metav IndustryLine
Take advantage of a self‑centring three‑point design and reliable analogue reading for repeatable internal diameter checks; the compact 125–150 mm range suits standard workshop and production measurement tasks. Order the instrument directly via Metav Werkzeuge or consult their advisors for tailored specification support. Three‑point internal micrometer M836.720 — self‑centring, 125–150 mm range, analogue The Three‑point internal micrometer M836.720 is an analogue, self‑centring measuring instrument designed for precise internal diameter inspection in workshop and production metrology. Self‑centring three‑point measuring system Measurement range 125–150 mm Accuracy 0.008 mm · Resolution 0.005 mm Consistent centring for repeatable bore measurement The three‑point contact geometry provides a uniform seat against bore surfaces, which reduces eccentricity and substantially improves repeatability compared with single‑point probes. Combined with an analogue spindle and fine graduation, the instrument achieves an accuracy of 0.008 mm and a resolution of 0.005 mm, making it suitable where sub‑hundredth millimetre consistency is required. This design shortens setup times on repetitive checks and produces stable readings even in blind or recessed bores. Purposeful dimensions for everyday shop use With a measurement span of 125–150 mm, the micrometer falls into the Standard (100–300 mm) class: a pragmatic compromise between reach and stiffness that fits most machining and assembly tasks. The instrument’s self‑centring action and three‑point kinematics are especially advantageous when measuring bearings, housings or bore features where quick alignment and reproducible seating matter. The mechanical construction favours robust handling in a production environment and resists small impacts better than delicate electronic heads. Straightforward handling and dependable inspection results The analogue readout keeps the concept simple: the finely graduated spindle permits controlled approach to the workpiece, and the three‑point framework locks the measuring head concentrically in the bore. Measuring faces are integrated into the contact system to provide defined contact geometry and reliable tactile feedback while measuring. Routine checks are therefore faster, with fewer adjustment cycles, and the instrument delivers consistent assessment of incoming parts or in‑process features — supporting clear pass/fail decisions on the shop floor while preserving traceable quality control practices. Contact Metav Werkzeuge in Emmerich for specification advice and ordering of the Metav IndustryLine three‑point internal micrometer M836.720 Technical data Article number: M836.720 GTIN: 4061905040979 Brand: Metav IndustryLine Facts Measurement range: 125–150 mm Accuracy: 0.008 mm Resolution / reading: 0.005 mm Analogue (mechanical) instrument Special features Self‑centring, three‑point measuring system Measuring faces integrated Category: Messschrauben / internal micrometer FAQ What is the measuring range of the instrument? The Three‑point internal micrometer M836.720 (Metav IndustryLine) covers a measurement span of 125–150 mm. What accuracy and resolution can be expected? The instrument specifies an accuracy of 0.008 mm and a readable resolution of 0.005 mm, using an analogue spindle and fine graduation. How does the self‑centring three‑point system improve measurements? The three contact points centre the head automatically within the bore, reducing eccentricity and producing more repeatable diameter readings than single‑point contacts. For which applications is this micrometer best suited? It is intended for internal diameter inspection of bearings, housings, bores and similar components in workshop and production quality control where a Standard‑range instrument is appropriate. Is calibration information provided for this item? No calibration certificate or specific calibration standard is listed in the product data for the Three‑point internal micrometer M836.720. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Three-Point Internal Micrometer Colour Touchscreen, Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 calibration, high repeatability and seamless data transfer for reproducible internal measurements in production and quality control. Order the instrument directly via Metav Werkzeuge or consult our specialists for application-specific advice. Three-point inside micrometer (pistol grip) — Microtech Metrology, colour touchscreen & Wireless+USB The three-point inside micrometer is a compact, workshop-ready internal measuring instrument designed for precise diameter checks of bores and housings in machine building and inspection. ISO 17025 calibrated with certificate Measuring range 125–150 mm three-point Accuracy ±0.004 mm for tight tolerances Wireless and USB data output, colour touchscreen Reliable accuracy that cuts rework The three-point internal gauge delivers repeatable readings thanks to its stable contact geometry: three opposing measuring points centre automatically and reduce alignment errors compared with two-point systems. With a certified accuracy of ±0.004 mm and a display resolution of 0.0001 mm, the device supports tight tolerance work and shortens inspection loops, which reduces rework and scrap rates. The measuring range of 125–150 mm places this instrument in the standard class for everyday machine‑shop tasks. Fast data capture for traceable production Integrated Wireless and USB outputs together with a 1.54" colour touchscreen simplify data logging and eliminate hand transcription. Measurements can be recorded directly into quality management systems, accelerating batch documentation and enabling immediate statistical process control. The instrument’s digital readout and serial data transfer make process monitoring measurable and auditable, strengthening production decisions based on live measurement data. Ergonomic design for consistent shopfloor use The pistol‑grip handle and compact three‑point head allow one‑handed operation and better control when measuring deep bores. The pistol grip reduces operator fatigue and the risk of inconsistent measuring force, which in turn improves reproducibility across shifts. The optional setting ring facilitates fine centring adjustments while the robust construction stands up to routine workshop handling, so inspections remain rapid without sacrificing precision. Calibrated delivery and integration into quality systems This micrometer is supplied fully calibrated to ISO 17025, including a calibration certificate, so it can enter the measuring routine immediately and meet laboratory or production‑line accreditation requirements. The instrument’s configuration supports standard traceability chains and makes integration into existing measurement networks straightforward. For traceable quality assurance and reduced acceptance delays, the certified delivery is a decisive practical advantage. Contact Metav Werkzeuge today to discuss how Microtech Metrology’s ISO 17025‑calibrated three‑point inside micrometer fits into the existing measurement plan and to request tailored setup assistance from our consultants at Metav Werkzeuge. Technical data Article number: 133515010 GTIN: 4061905041525 Manufacturer: Microtech Metrology Data output: Wireless+USB Display: Colour 1.54" touchscreen Delivered calibrated: ISO 17025 with certificate Facts Accuracy: ±0.004 mm Resolution: 0.0001 mm Measuring range: 125–150 mm Measuring depth: 130+150 mm Special features Digital instrument Pistol grip design Three‑point internal measuring head Setting ring: optional Wireless and USB data transfer Supplied with calibration certificate per ISO 17025 FAQ What types of measurements does the three-point instrument perform? The three-point inside micrometer performs internal diameter measurements with three opposing contact points, providing centred, repeatable readings for bores and housings; the Microtech Metrology gauge supports measuring, centring and depth-related checks within its 125–150 mm range. Is the instrument ready for metrology labs on delivery? Yes. The device is supplied fully calibrated to ISO 17025 and includes a calibration certificate, so it can be used immediately in accredited workflows or for traceable shopfloor quality control. How is measurement data exported from the instrument? Measurement values are available via Wireless and USB interfaces and can be captured by data loggers or quality management software for statistical evaluation and traceability. Can this micrometer be used for production line sampling? Designed for robust shopfloor use, the instrument’s pistol grip and digital output suit sampling workflows and inline quality checks where fast, repeatable internal measurements and immediate data logging are required. What benefits does the three-point head provide over two-point gauges? A three-point arrangement centres automatically within the bore and reduces angular errors; this leads to improved repeatability and fewer alignment‑related deviations, especially in tapered or slightly offset bores. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-150mm Three-Point Internal Micrometer Digital With ABS/mm/inch Readout, Hardened Measuring Faces, Supplied In Case - Metav IndustryLine
Take advantage of the combination of precise three‑point measurement, a digital display with mm/inch and ABS functions, and robust workshop integration for reliable internal dimension control. Order the three‑point internal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Three-point internal micrometer M312.257 — Digital inside micrometer, 125–150 mm range (Metav IndustryLine) The Three-point internal micrometer M312.257 is a digital instrument for accurate internal diameter measurement in medium-sized components, suited to workshop and production use. Digital display with mm/inch and ABS Three-point precision spindle Range 125–150 mm Accuracy ±0.006 mm Precise internal measurement for repeatable results The instrument delivers consistent internal dimension readings by using a three‑point measuring spindle that centres automatically in bores and recesses. With a measuring range of 125–150 mm and a measuring depth of 140 mm, the tool is designed for medium‑sized components where repeatable centring reduces operator variation. The specified accuracy of ±0.006 mm together with a display resolution of 0.001 mm supports quality checks and first‑article inspections without recourse to more complex gauging systems. Digital features that streamline inspection workflows Equipped with a digital display offering ON/0-, mm/inch, ABS, PRESET and HOLD functions, the micrometer simplifies data capture and conversion between metric and imperial units. The integrated data output RB 4 enables connection to readout systems or recording devices, accelerating documentation and reducing transcription errors. These features combine to reduce cycle times during serial inspection and to support traceable measurement routines in production environments. Robust design for everyday workshop use Built for regular use in machine shops, the instrument includes hardened measuring faces to resist wear and preserve accuracy under frequent contact. A sturdy frame and an ergonomic thimble support controlled application of measuring force, so each measurement is both comfortable and reliable. The device’s weight of 2.6 kg reflects its solid construction and contributes to stable handling when measuring deep or awkward internal geometries. Practical scope, handling and limitations Delivery is without a setting ring; customers should plan for an appropriate reference gauge if traceable zeroing is required. The micrometer’s mechanical concept is tailored to internal diameters within the stated range and is optimised for centred bore measurement rather than highly eccentric or oblong profiles. Where four‑function measurement would be required, note that the instrument is configured specifically for internal diameter tasks and the three‑point spindle ensures rapid centring and repeatable contact geometry. Contact Metav Werkzeuge in Emmerich for application advice or to order the Metav IndustryLine M312.257 from local stock — our consultants will confirm compatibility with the intended measuring task Technical data Article number: M312.257 GTIN: 4054469119991 Manufacturer: Metav IndustryLine Core technical data Measuring range: 125–150 mm Resolution: 0.001 mm Accuracy: ±0.006 mm Measuring depth: 140 mm Weight: 2.6 kg Data output: RB 4 Special features Digital display with ON/0-, mm/inch-, ABS-, PRESET- and HOLD-button Three-point measuring spindle for automatic centring Hardened measuring faces Delivery without setting ring Suitable for workshop and production inspection tasks FAQ What internal diameters can be measured with this micrometer? The micrometer covers a measuring range of 125–150 mm, making it suitable for medium‑sized bores and internal features within that span. How precise are the readings from the instrument? The device provides a resolution of 0.001 mm and an accuracy of ±0.006 mm, appropriate for routine quality control in metalworking and component production. Can measurement data be exported electronically? Yes, the instrument supports data transfer via RB 4 output, allowing integration with inspection software or data loggers. Are the measuring faces wear‑resistant? The micrometer is fitted with hardened measuring faces to reduce wear and maintain measurement stability under frequent use. Does the delivery include a setting ring or reference gauge? Delivery is without a setting ring; a separate reference gauge is recommended for traceable zeroing and calibration checks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Three-Point Internal Micrometer For Blind Hole Measurement, Digital With ON/Zero, Mm/Inch, ABS, Preset, Hold, RB 4 Interface, Case - Metav IndustryLine
Take advantage of the instrument's combination of reliable digital readout, dedicated blind‑hole capability and a verified accuracy of ±0.006 mm for consistent in‑process control. The three‑point measuring geometry and a 125–150 mm measuring span make this tool suitable for medium‑range internal measurements; order directly via Metav Werkzeuge or consult the technical team for application advice. Three‑point internal micrometer M312.257.S — digital instrument for blind‑hole measurement, 125–150 mm The Three‑point internal micrometer M312.257.S is a digital internal micrometer engineered for precise measurement of blind holes and bore features within the 125–150 mm range Three‑point measuring geometry for stable contact Digital display with mm/inch, ABS and hold functions Measuring range 125–150 mm for workshop versatility High repeatability with a stated accuracy of ±0.006 mm Consistent results for blind‑hole inspections The instrument’s three‑point contact design provides stable centring in blind bores, reducing eccentricity and operator influence during measurement. With a dedicated geometry for blind‑hole applications and a measuring depth of 140 mm, this device ensures reproducible contact across the measured diameter and supports routine quality checks on housings and threaded blind bores. The solid construction minimises flex and contributes directly to repeatable readings, making it a pragmatic choice for production and inspection stations alike. Clear, fast readout and data transfer for process control A digital display with ON/0-, mm/inch, ABS, PRESET and HOLD keys offers straightforward operation and quick unit changes, reducing cycle time at the inspection bench. The instrument reads to 0.001 mm, providing fine resolution for comparative checks, while the integrated RB 4 data output lets measured values be logged or fed into QC systems for traceable process control. The ergonomic control layout and measurable weight of 2.6 kg support stable handling without excessive operator fatigue. Workshop‑ready design that supports efficiency Classified in the standard range for internal measuring tools, this device balances reach and stiffness for everyday machine‑shop tasks. The instrument includes hardened measuring faces suitable for industrial use and is delivered without a setting ring, enabling immediate deployment where custom setting rings are not required. Built to integrate into existing inspection routines, it simplifies bore verification on batches, supporting faster decision‑making and fewer stoppages in production. Choose the Metav IndustryLine three‑point internal micrometer for reliable blind‑hole measurement and contact Metav Werkzeuge in Emmerich for application guidance and supply coordination Technical Data Article number: M312.257.S GTIN: 4054469158969 Manufacturer: Metav IndustryLine Tariff code: 90173000 Data output: RB 4 Facts Measurement range: 125–150 mm Measuring depth: 140 mm Resolution (reading): 0.001 mm Accuracy: ±0.006 mm Weight: 2.6 kg Special features Digital display with ON/0-, mm/inch, ABS, PRESET and HOLD Three‑point measuring geometry for blind‑hole measurement Hardened measuring faces included Delivery without setting ring FAQ What kinds of bores is this micrometer intended for? The three‑point internal micrometer M312.257.S is intended primarily for blind‑hole and bore measurements in the 125–150 mm range, where a centred three‑point contact improves stability. How precise are the measurements with this instrument? The device offers a reading resolution of 0.001 mm and a stated accuracy of ±0.006 mm, suitable for workshop and quality‑control tasks requiring consistent repeatability. Can measurement results be recorded electronically? Yes, the instrument provides an RB 4 data output for transfer of measured values to compatible logging or QC systems. Is a setting ring included with delivery? No; delivery is without a setting ring, allowing shops to use their preferred calibration or setting tools. What makes the three‑point design advantageous for blind holes? The three‑point geometry centres itself in the bore, reducing runout and ensuring that contact points produce a stable, repeatable diameter measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Three-Point Internal Micrometer For Blind Holes, Ratchet, Matt Chrome Scale In Plastic Case - Metav IndustryLine
Take advantage of precise internal diameter measurement across a practical workshop range, combined with a ratchet stop for reproducible pressure and a clear analogue vernier for reliable read‑out; order the instrument directly via Metav Werkzeuge or ask our consultants if bespoke advice is required. Metav IndustryLine three‑point internal micrometer M312.147.S — 125–150 mm range, analogue vernier A robust three‑point internal micrometer for accurate measurement of internal diameters, designed especially for blind‑hole applications in machine shops and quality control. Three‑point measuring head for centred contact Measuring range 125–150 mm Ratchet stop for reproducible pressure Hardened measuring faces and matt chrome scale Precise blind‑hole measurement for consistent results The instrument uses a three‑point measuring head that automatically centres in bores, converting variable contact points into a single reliable diameter result; this geometry is particularly advantageous when measuring blind holes where axial access is limited. With a measuring range of 125–150 mm, the micrometer sits in the standard class for workshop metrology, offering the best compromise between reach and rigidity for daily use in machine and metalworking environments. The specified accuracy ±0.006 mm and a resolution of 0.005 mm (analogue nonius) provide predictable, verifiable results that support quality control documentation and process consistency. Durable design for repeatable handling on the shop floor Built for frequent use, the unit features a ratchet stop to standardise contact pressure and reduce operator‑induced variation; this contributes directly to faster series checks and fewer reworks. The measuring faces are hardened, extending service life where contact occurs with finished surfaces, while the matt chrome scale and vernier ensure legible readings under workshop lighting. A measuring depth of 140 mm allows access into moderately deep bores without sacrificing stability, and the instrument’s mechanical design favours robust daily handling and straightforward maintenance. Integration into inspection routines and practical guidance This analogue micrometer requires no electronics, making it straightforward to integrate into existing inspection benches and fixtures; measurements can be recorded manually for traceable inspection reports. The instrument is supplied without a setting ring, so calibration or setting procedures should be planned into initial commissioning to match in‑house standards. For tasks that prioritise mechanical simplicity, repeatability and ease of interpretation, this micrometer is a pragmatic choice within production control and toolroom workflows. For tailored advice on the Metav IndustryLine three‑point internal micrometer M312.147.S and delivery from Emmerich, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com for expert support and availability Technical data SKU: M312.147.S GTIN: 4054469158693 Manufacturer: Metav IndustryLine Type: Three‑point internal micrometer (analogue) Material: scale and vernier matt chrome Measuring range: 125–150 mm Measuring depth: 140 mm Resolution: 0.005 mm Accuracy: ±0.006 mm Weight: 3.1 kg Ratchet stop: yes Special application: for measuring blind holes Delivered without setting ring Customs tariff number: 90173000 Facts Measuring range: 125–150 mm Measuring depth: 140 mm Resolution: 0.005 mm Accuracy: ±0.006 mm Weight: 3.1 kg Special features Three‑point measuring head Ratchet stop for constant measuring force Hardened measuring faces Scale and vernier matt chrome Analogue nonius display Suitable for blind‑hole measurement Delivered without setting ring FAQ How accurate is the three‑point internal micrometer? The Metav IndustryLine three‑point internal micrometer M312.147.S provides an accuracy of ±0.006 mm with a resolution of 0.005 mm via its analogue vernier display. Can this instrument measure blind holes reliably? Yes, the tool was designed for blind‑hole measurement and includes a three‑point head and a measuring depth of 140 mm that facilitate reliable results in such applications. Is a setting ring supplied with the micrometer? No, the delivery does not include a setting ring; calibration or a reference standard should be used when commissioning the instrument. Is the read‑out digital or analogue? The device uses an analogue nonius (vernier) for read‑out, suited to environments where mechanical simplicity and reliability are preferred. What workshop tasks is this micrometer best suited to? It is ideal for internal diameter checks in machine shops, toolrooms and quality control departments where repeatable measurements of blind or through bores are required. How does the ratchet stop improve measurement quality? The ratchet stop standardises the contact pressure applied during measurement, reducing operator variance and improving repeatability of results across multiple checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Three-Point Internal Micrometer Self-Centring With Hardened Measuring Faces, Supplied In Case - Metav IndustryLine
Take advantage of the combination of self-centring three-point contact, hardened measuring faces and a protective case for reliable, repeatable blind-bore measurement; order directly via Metav Werkzeuge or request advice from our technical consultants. Three-point internal micrometer MS908.664 — self-centring design, 125–150 mm (Metav IndustryLine) The Three-point internal micrometer MS908.664 is a precision instrument for accurate measurement of blind bores and internal diameters in machine shops and inspection benches Self-centring three-point contact Accuracy ±0.005 mm Hardened measuring faces Supplied in protective case Consistent concentric measurement where it matters The instrument’s self-centring three-point contact mechanism converts small radial differences into a single, centred datum, ensuring high repeatability during blind-bore checks. With a mechanical resolution and accuracy of ±0.005 mm, the device supports tight tolerance verification and process control for internal diameters. This level of precision is particularly useful when comparing series parts or validating internal fits, as the three-point geometry minimises eccentricity and reduces operator-induced variation. Robust construction for repetitive workshop use A durable construction and hardened measuring faces protect the contact points from wear and maintain measurement integrity over prolonged use. The analogue, mechanical drive reduces complexity and avoids battery dependence, making the tool suitable for routine quality inspections on the shop floor. The overall length of 145 mm gives the reach required for its measurement range while keeping the instrument compact enough for stable handling during repeated checks. Ideal balance of reach and stiffness for standard applications Classified in the standard range for internal measurement instruments (125–150 mm), this micrometer offers the best compromise between measuring reach and structural rigidity. That balance is critical in metalworking and fixture assembly, where longer tools can introduce deflection and shorter tools lack coverage. The design is optimised for blind bores, providing reliable access and reproducible contact even when full through-access is not available. Delivered protected and ready for transport The instrument is supplied in a protective case to safeguard measuring faces and the mechanism during transport and storage. Built for regular inspection cycles, it integrates easily into workshop tool sets and measurement benches; its analogue readout is simple to interpret and maintain, supporting efficient quality routines without complex electronic calibration procedures. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine three-point internal micrometer MS908.664 and to arrange procurement or technical specification support; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS908.664 Manufacturer: Metav IndustryLine Type: Three-point internal micrometer Feature: Self-centring Measuring range: 125–150 mm Length: 145 mm Accuracy: 0.005 mm Reading: 0.005 mm Mechanism: Analogue Delivery: protective case Measuring faces: hardened Suitable for: blind bores Numeric data Measurement range: 125–150 mm Maximum measurement: 150 mm Minimum measurement: 125 mm Accuracy/resolution: 0.005 mm Length: 145 mm SKU: MS908.664 Design and special features Self-centring three-point contact Hardened measuring faces for wear resistance Analogue drive for low maintenance Compact length for stable handling Supplied in protective case for transport Intended for blind-bore measurement FAQ What measurement range does the instrument cover? The instrument covers a measurement range of 125–150 mm, placing it in the standard workshop range suitable for many machine‑building and metalworking applications; refer to MS908.664 for exact limits. What accuracy and resolution are specified? The device offers an accuracy and reading resolution of 0.005 mm, enabling reliable checks against typical tight tolerance requirements. Is the design suitable for blind bores? Yes — the self-centring three-point contact is engineered specifically to measure blind bores with improved concentricity and repeatability. Are the measuring faces wear-resistant? The measuring faces are hardened to resist wear and maintain consistent contact geometry during repetitive inspection tasks. Is a protective case included? The instrument is supplied in a protective case to secure the micrometer during transport and storage. Is the micrometer digital or analogue? This is an analogue instrument with a mechanical drive and a direct, tactile measuring feel appropriate for workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150mm Three-Point Internal Micrometer With Carbide Measuring Faces, Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of high wear resistance and consistent measuring force for reliable bore inspection in routine workshop use; the combination of carbide measuring faces and a ratchet drive ensures repeatable results and long service life. Order the instrument directly via Metav Werkzeuge or consult the technical advisors if further specification guidance is required. Three-point internal micrometer 125–150 mm — analogue micrometer with carbide measuring faces (Metav IndustryLine) A Three-point internal micrometer 125–150 mm designed for accurate internal diameter measurement of bores and recessed features in machine and toolmaking applications. Carbide measuring faces for wear resistance Ratchet drive for consistent measuring force Measuring range 125–150 mm Analogue vernier, 0.005 mm reading Repeatable precision where it matters The three‑point design centres reliably in bores, providing stable contact at three equidistant points to reduce tilting and eccentricity during measurement. Combined with carbide measuring faces, the instrument resists wear from repeated use and abrasive environments, so calibration intervals are extended and measurement drift is minimised. The mechanical construction yields an accuracy ±0.006 mm, which supports high‑quality inspection tasks in routine production and quality control; this level of precision makes the tool suitable as a trusted workshop standard for internal diameter checks. Robust, workshop‑ready design and range suitability With a measuring range 125–150 mm, the instrument falls into the standard class for machine and metalworking shops, delivering an effective balance between reach and rigidity. The measuring depth 140 mm enables access to deeper bores and housings without compromising handling. The matt-chromed scale and vernier reduce glare and improve legibility in bright workshop lighting, while the analogue layout and vernier graduation (0.005 mm reading) allow fast, intuitive readings without dependency on batteries or electronics. The instrument is supplied in a transport case and delivered without setting ring, allowing tailored selection of reference rings where specific bore standards are required. Handling, maintenance and practical benefits A ratchet drive ensures a consistent measuring force for repeatable results across operators and shifts, reducing operator‑induced variability. The analogue construction simplifies routine maintenance: periodic cleaning of the spindle and faces and light lubrication of the threaded spindle are normally sufficient to maintain performance. For workshop applications such as checking bearing bores, housings or jig components, the combination of three‑point contact and wear‑resistant faces translates into fewer re‑measures and less downtime, supporting production efficiency and traceable inspection routines. Secure this Metav IndustryLine three‑point internal micrometer for dependable bore measurement; contact Metav Werkzeuge in Emmerich for application advice and reliable supply. Technical Data SKU: M312.147 GTIN: 4054469119533 Category: Micrometers ECLASS: 21170335 ETIM: EC003590 Facts Measuring range: 125–150 mm Measuring depth: 140 mm Resolution / reading: 0.005 mm Accuracy: ±0.006 mm Design: Analogue (vernier) Tariff number: 90173000 Special features Carbide measuring faces Matt‑chromed scale and vernier Ratchet drive Delivery without setting ring Supplied in transport case FAQ How does the three‑point mechanism improve measurement stability? The three‑point internal micrometer centres automatically within a bore by contacting at three points; this geometry minimises tilt and eccentricity, so measurements taken with the instrument are more repeatable than single‑point probes. Is a setting ring included for calibration? Delivery is made without a setting ring; a separate gauge ring is recommended for zero‑setting and traceable calibration of the micrometer before use. What accuracy can be expected in workshop conditions? The instrument is specified with an accuracy of ±0.006 mm; combined with proper zero‑setting and careful technique, this supports reliable inspection within standard workshop tolerances. Can the instrument be used for deep bores? Yes. The measuring depth of 140 mm allows access to deeper recesses and housings while maintaining the rigidity necessary for repeatable internal diameter checks. Are the measuring faces suitable for abrasive environments? The carbide measuring faces provide high wear resistance, making the instrument appropriate for prolonged use where occasional contamination or abrasive particles may be present. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-2000mm Inside Micrometer Digital Readout IP65, Calibrated to ISO 17025 - Microtech Metrology
Take advantage of the combination of ISO 17025 traceable calibration, a 125–2000 mm measuring range and robust IP65 protection for reliable long‑range internal measurement in production environments; order the internal micrometer directly via Metav Werkzeuge or ask our consultants for application advice. Microtech Metrology Internal Micrometer – digital, ISO 17025 calibrated The internal micrometer is a digital measuring instrument designed for long‑range internal diameter checks in toolmaking, fixture construction and heavy machining. ISO 17025 calibration certificate included IP65 protection for workshop conditions Measuring range 125–2000 mm Digital readout with 0.0001 mm resolution Precise long‑range measurement that stays reliable The instrument delivers reproducible results across a 125–2000 mm span, making it suitable for large bores and assemblies where consistent internal diameters are critical. With a stated accuracy of 0.02 mm and a high‑definition resolution of 0.0001 mm, the device separates the notions of resolution and measurement uncertainty clearly: the fine digital readout supports precise setting and trend detection, while the declared accuracy defines the reliable tolerance for quality control. This combination benefits production control and in‑process inspection by reducing rework and scrap through dependable size verification. Built for the workshop, guarded against contamination A workshop‑grade design with IP65 ingress protection ensures the electronics and measuring mechanism withstand dust and splash exposure typical in machining environments. The construction is aimed at long‑range handling: a compact measuring head (diameter 22 mm) and modular rod system minimise bending and enable stable positioning over the full measuring span. The robust build reduces measurement variation across multiple operators and shifts, supporting consistent throughput in demanding production contexts. Flexible extension system and intuitive digital operation Modular extension rods are supplied to cover the complete range: short and long extensions are available to bridge between the spindle and large bore surfaces, enabling efficient stepwise assembly for different component sizes. The digital readout simplifies read‑back and reduces transcription errors; numeric steps and clear display settings accelerate routine checks and help maintain production flow. The combination of modular extension rods and a clear electronic display makes measurements quicker to set up and easier to document in inspection plans. Traceable calibration for quality assurance Delivered fully calibrated to ISO 17025 with a corresponding certificate, the instrument integrates into accredited quality management systems without additional calibration steps. Traceability to an international standard provides auditors and quality engineers with verifiable measurement confidence and streamlines acceptance in regulated production. For companies consolidating supplier lists, this traceable supply from a recognised metrology manufacturer supports audit readiness and reduces administrative burden. For tailored advice on long‑range internal measurement or to secure supply of the Microtech Metrology internal micrometer and compatible extension rods, contact Metav Werkzeuge in Emmerich for expert consultation and prompt delivery. Technical data Article number: 133800200 GTIN: 4061905041716 Manufacturer: Microtech Metrology Digital display: yes IP rating: IP 65 ISO 17025: delivered calibrated with certificate Facts Measuring range: 125–2000 mm Resolution (display): 0.0001 mm Accuracy: 0.02 mm Diameter: 22 mm eCl@ss: 21170335 ETIM: EC003590 Special features Delivered calibrated to ISO 17025 with certificate Modular extension rods: 25 +50 (2 pcs) +100 (2 pcs) +200 (2 pcs) +400 (3 pcs) Robust construction for workshop use Suitable for long‑span internal diameter inspection Category: internal micrometers (Messschrauben) FAQ Is the instrument supplied with a calibration certificate? Yes. The Microtech Metrology internal micrometer (SKU 133800200) is delivered fully calibrated to ISO 17025 and includes the calibration certificate. What is the usable measuring range for this micrometer? The device covers a measuring span from 125 to 2000 mm, using the supplied modular extension rods to reach larger internal diameters. How does the resolution relate to accuracy on this instrument? The digital readout shows 0.0001 mm steps for precise indication, while the guaranteed measurement uncertainty is 0.02 mm, defining the reproducible tolerance for quality control. Is the unit suitable for workshop environments with coolant or dust? Yes. The micrometer is rated IP65, affording protection against dust ingress and low‑pressure water jets typical in machining environments. Are extension rods included and which sizes are available? Extension rods are available as described: 25, 50 (2 pieces), 100 (2 pieces), 200 (2 pieces) and 400 (3 pieces) to assemble the required measuring length. Who manufactures this internal micrometer? The instrument is produced by Microtech Metrology and is supplied calibrated for industrial use; refer to the product SKU 133800200 for ordering and traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-2000mm Internal Digital Micrometer With IP65 Protection, ISO 17025 Calibration - Microtech Metrology
Take advantage of a wide measurement span and laboratory-grade traceability: the combination of a 125–2000 mm measuring range, 0.001 mm display resolution and an ISO 17025 calibration certificate ensures reliable in-process checks and consistent quality control. Order the instrument directly via Metav Werkzeuge or contact our consultants for tailored delivery and calibration options. Digital internal micrometer — Microtech Metrology — 125–2000 mm, IP65, ISO 17025 The digital internal micrometer is a robust precision instrument for internal diameter measurement across a very wide range, designed for toolrooms, fixture shops and production inspection tasks ISO 17025 calibrated delivery Wide range 125–2000 mm with extensions IP65 protection for shop-floor use 0.001 mm resolution, 0.03 mm accuracy Measure large bores with repeatable micron-level control This instrument delivers a 0.001 mm display resolution (one micron) combined with a stated accuracy of 0.03 mm, which translates into dependable repeatability for serial inspection and incoming part verification. The digital display supports ON/ABS, SET and HOLD functions plus mm/inch readout, making zeroing and comparative checks straightforward; the absolute mode preserves reference settings after switch‑off, reducing setup time during batch inspection. These characteristics minimise scrap and help maintain production tolerances without slowing throughput. Built for demanding workshop environments and long reaches With a measuring span from 125–2000 mm enabled by the supplied extension rods, the gauge covers medium to very large internal dimensions without sacrificing rigidity. The device carries an IP65 rating, rendering it resistant to dust and water jets typical on the shop floor, while the integrated friction ratchet promotes constant measuring force to reduce operator-induced variability. The compact measuring head (22 mm diameter) eases access into narrow bores and deep housings; this combination of features supports fast, consistent checks on assemblies and welded or machined components. Traceable calibration and workflow benefits for quality assurance The instrument is supplied fully calibrated to ISO 17025 and includes the calibration certificate, providing traceability for audit and quality records. That formal calibration simplifies compliance with internal quality plans and customer requirements and shortens the path from goods receipt to production release. Manufacturer provenance and the robust digital feature set make the tool suitable as a primary workshop gauge or a dedicated control instrument in inspection benches, improving confidence in measurement data and reducing rework. Contact Metav Werkzeuge for delivery, calibration documentation and application advice on Microtech Metrology internal micrometers; our team in Emmerich will help configure the instrument to production needs. Technical data Article number: 133800202 GTIN: 4061905041570 Manufacturer: Microtech Metrology Facts Measuring range: 125–2000 mm Resolution: 0.001 mm Accuracy: 0.03 mm Measuring head diameter: 22 mm Special features IP65 protection ISO 17025 calibrated with certificate Digital display: ON/ABS, SET, HOLD, mm/inch Friction ratchet Extensions: 25; 50 (2); 100 (2); 200 (2); 400 (3) FAQ What measuring range does the device cover? The instrument measures from 125 mm up to 2000 mm using the supplied extension rods for flexible bore inspection. Is the micrometer suitable for regular shop-floor use? Yes; with an IP65 rating and a friction ratchet for consistent measuring force, the micrometer is designed for routine workshop environments. Does the delivery include a calibration certificate? The device is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceability and audit purposes. Which display functions are available on the digital readout? The digital readout offers ON/ABS, SET and HOLD functions plus mm/inch selection to simplify zeroing and comparative measurements. Who manufactures the instrument and what is the article number? The micrometer is produced by Microtech Metrology; article number 133800202 is shown on the device and documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-3000mm Internal Micrometer Digital Readout With ON/ABS/SET/HOLD Mm/Inch, IP65, ISO 17025 - Microtech Metrology
Take advantage of highly accurate large‑bore measurement, robust protection against workshop dust and splash, and traceable ISO 17025 calibration for reliable process control. Order the instrument directly via Metav Werkzeuge or consult our specialists for application support. Inside Micrometer — digital inside measuring instrument, IP65, Microtech Metrology An inside micrometer designed for precision internal measurement of large bores and assemblies in heavy fabrication and metrology labs. Digital display with 0.001 mm resolution Measurement range 125–3000 mm Delivered with ISO 17025 calibration certificate IP65 protection and friction ratchet Accurate large‑bore measurement that speeds QC decisions This instrument brings high-resolution readout and repeatable measurement to large internal diameters: the 0.001 mm display resolution combined with a practical ±0.04 mm accuracy enables confident acceptance or rejection of components without time‑consuming secondary checks. The clear digital display (ON/ABS, SET, HOLD, mm/inch) reduces reading errors and shortens cycle time in inspection routines. For production environments where throughput and traceability matter, the measurable benefit is faster, more reliable quality decisions. Built for harsh workshop conditions and reproducible handling A robust enclosure rated IP65 protects the electronics against dust and water jets, making the instrument suitable for machine shops and site measurements. The integrated friction ratchet ensures a consistent measuring force, which reduces operator‑induced variation and improves repeatability on large diameters. These design choices translate into fewer measurement re‑runs and less downtime for recalibration or repair, supporting continuous production with consistent metrology performance. Traceable calibration and process documentation Delivered fully calibrated to ISO 17025, the instrument arrives with a calibration certificate that documents measurement uncertainty and traceability to national standards. This simplifies audit preparation and supplier qualification processes, since the calibration status and certificate are ready to file. The certificate supports quality systems and demonstrates that measurement data used for release decisions meets recognised laboratory standards. Flexible extension system for extended ranges and easy setup The modular extension set (25, 50, 100, 200, 400 mm lengths in multiple pieces) allows the instrument to cover the full 125–3000 mm span without complex adapters. As a result, inspection teams can adapt quickly to differing bore depths and diameters with a single, calibrated measuring system. Fewer tools are needed, storage and training are simplified, and handling remains practical even for extra‑long measurements. Choose the Microtech Metrology inside micrometer via Metav Werkzeuge for traceable, large‑format internal measurement—contact Metav Werkzeuge for detailed specification advice and delivery from Emmerich. Technical data Brand: Microtech Metrology SKU: 133800302 GTIN: 4061905041686 eClass: 21170335 ETIM: EC003590 IP rating: IP 65 Calibration: ISO 17025 certificate included Measurement range: 125–3000 mm Facts Resolution: 0.001 mm Stated accuracy: ±0.04 mm Display functions: ON / ABS / SET / HOLD / mm‑inch Measurement span min: 125 mm Measurement span max: 3000 mm Special features Digital readout with mm/inch toggle Friction ratchet for consistent measuring force Extension set: 25, 50 (2 pcs), 100 (2 pcs), 200 (3 pcs), 400 (5 pcs) Robust IP65 housing suitable for workshop use Category: inside measuring instruments / micrometrology Calibration certificate supplied (ISO 17025) FAQ What measurement range does the instrument cover? The instrument covers an internal measurement span from 125 mm to 3000 mm, enabled by the supplied modular extension set. Is the device traceably calibrated? Yes — the inside micrometer is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate. What resolution and accuracy can be expected? The digital display provides a 0.001 mm resolution with a stated accuracy of around ±0.04 mm for reliable large‑bore inspection. Can the instrument be used in a workshop environment? Its IP65 rating and robust construction make this measuring system suitable for typical workshop and machine‑shop conditions. Which display functions are available on the digital readout? The readout includes ON, ABS, SET, HOLD and mm/inch functions for flexible measurement workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-3000mm Internal Micrometer Digital, IP65, ISO 17025 Calibrated - Microtech Metrology
Combine long-range internal measurement with robust protection and traceable calibration to ensure reproducible results on large bores. Benefit from the modular extension system and IP65 rating for reliable workshop use; order the internal micrometer directly via Metav Werkzeuge or consult our specialists for configuration advice. Internal Micrometer — digital long-range bore gauge, IP65 (Microtech Metrology) Internal Micrometer for extra-long internal measurements up to 3,000 mm with a high-resolution digital readout High-resolution digital readout 0.0001 mm Measurement range up to 3,000 mm IP65 dust and water protection ISO 17025 calibration certificate included Precision over long distances for large components This inside measurement system is designed as an extra-long solution for bores and internal features up to 3,000 mm, combining reach with repeatability. The instrument offers a digital readout with a display resolution of 0.0001 mm, while the specified measurement accuracy ±0.03 mm defines the dependable tolerance band for inspection tasks. The separation between display resolution and accuracy is explained here: the high display resolution helps detect small changes during alignment and adjustment, whereas the stated accuracy reflects the certified uncertainty of measurement under calibrated conditions. Typical applications include large housing bores, long spindle seats and toolroom inspection where length and stability matter. Built to withstand workshop conditions and repeat measurement cycles Constructed for regular use on the shop floor, the gauge features an IP65 rating that guards electronics against dust ingress and water jets, making it suitable for dusty or coolant-prone environments. The robust design with modular extension rods (25, 50, 100, 200, 400 mm modules in various counts) allows flexible assembly for a wide range of depths without resorting to ad-hoc fixtures. As a result, the system reduces handling time and improves reproducibility when measuring elongated cavities or stepped bores, supporting consistent quality control across production batches. Traceable calibration and configurable delivery for inspection-ready use Delivered fully calibrated with an ISO 17025 certificate, the device arrives ready for integration into quality assurance processes that require traceability. The included calibration certificate documents the measurement uncertainty and the test conditions used during verification. For inspection labs and manufacturing departments, this means immediate acceptance for documented measurement tasks and reduced lead time before first use. The modular extension set can be selected to match the measurement range required, simplifying inventory management for metrology equipment. Choose Microtech Metrology's calibrated internal micrometer for dependable long-range bore control and contact Metav Werkzeuge in Emmerich for specification support and tailored extension sets — info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 133800300 GTIN: 4061905041723 Brand: Microtech Metrology IP rating: IP65 Calibration: ISO 17025 certificate included Facts Measurement range: 125–3,000 mm Resolution (display): 0.0001 mm Accuracy: ±0.03 mm Extension rods: 25+50 (2)+100 (2)+200 (3)+400 (5) eClass: 21170335 ETIM: EC003590 Special features Digital internal micrometer / bore gauge Robust electronics sealed to IP65 Modular extension system for long-range measurement Supplied calibrated with traceable certificate High-resolution readout for alignment work FAQ What measurement range does the instrument cover? The device measures from 125 mm up to 3,000 mm, making it suitable for extra-long internal dimensions and deep bore inspections. Is the micrometer delivered calibrated and traceable? Yes, the instrument is supplied fully calibrated and includes an ISO 17025 calibration certificate that documents measurement uncertainty and traceability. What accuracy and resolution can be expected? The system provides a display resolution of 0.0001 mm while the certified accuracy is ±0.03 mm, reflecting the instrument's calibrated performance envelope. Can the set be adapted to different bore depths? The micrometer is modular: it uses extension rods in the supplied configuration (25, 50, 100, 200 and 400 mm lengths) to assemble the required measuring length for specific applications. Is the readout protected for use in industrial environments? Yes, the electronics are sealed to IP65, protecting the readout from dust and low-pressure water jets commonly encountered on shop floors. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com