Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
10–12mm Three-Point Internal Micrometer Pistol Grip, Colour Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable precision with ISO 17025 calibration, a colour touchscreen and Wireless + USB data output; combine high reproducibility and compact measuring range for controlled inspection cycles and order the instrument directly via Metav Werkzeuge or consult our specialists if required. Three-point internal micrometer — digital micrometer with ISO 17025 calibration (Microtech Metrology) The Three-point internal micrometer is a digital instrument for precise internal diameter measurement in fine mechanical work and production inspection. ISO 17025 calibrated with certificate ±0.003 mm high measurement accuracy Wireless + USB data output for traceability 1.54" colour touchscreen display Precise measurement in a compact format for small bores This instrument targets inspections where space is limited: the 10–12 mm measuring range places it in the Micro class, optimised for fine mechanical and watchmaking tasks. The combination of a tight measuring span and a rigid three‑point measuring arrangement ensures stable centring and repeatable contact with the workpiece, which reduces measurement scatter. With a guaranteed accuracy of 0.003 mm, the device supports reliable pass/fail decisions on small diameters without the need for larger, more cumbersome equipment. Fast data handling and digital traceability for quality workflows Equipped with a Color 1.54" touchscreen and Wireless + USB data output, the micrometer streamlines data capture and documentation. The high‑resolution readout (display reading 0.0001 mm) provides detailed feedback at each measurement step, while the digital interfaces permit straightforward transfer of results into inspection software or quality records. This reduces transcription errors and accelerates batch sampling, supporting efficient in‑line quality control and archival traceability. Calibrated and delivery‑ready for accredited inspection The instrument is supplied fully calibrated in accordance with ISO 17025, and a calibration certificate is included, so the device can be integrated into accredited test routines immediately upon receipt. An adjustment ring is supplied as standard to facilitate setting and verification, making the micrometer suitable for laboratories and shopfloor environments that require documented measurement chains and audit readiness. Designed for repeatability and practical application The three‑point measuring principle offers secure multi‑contact measurement of internal diameters and helps average out small form deviations, yielding a representative diameter value rather than a single local reading. With the compact measuring depth options of 50 + 100 mm, the device can reach into deeper bores or stepped features while remaining easy to handle. Typical applications include precision components, small bearing bores, and instrument parts where reproducibility and documented traceability are essential. For traceable measurement in compact bores, contact Metav Werkzeuge to request the Microtech Metrology three‑point internal micrometer (SKU 133501210) with ISO 17025 calibration and Wireless + USB data output — our consultants will advise on integration and delivery from Emmerich. Technical data Article number: 133501210 GTIN: 4061905041761 Manufacturer: Microtech Metrology Category: Micrometers Core data Measuring range: 10–12 mm Measuring depth: 50 + 100 mm Reading: 0.0001 mm Accuracy: ±0.003 mm Display: Color 1.54" touchscreen Data output: Wireless + USB eClass: 21170335 ETIM: EC003590 Special features Digital measurement Adjustment ring included ISO 17025 calibrated with certificate Integrated data interfaces for direct export Fully calibrated delivery state FAQ Is the instrument delivered calibrated? Yes. The three‑point internal micrometer is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceable use in accredited workflows. What measuring range and classification does the instrument have? The instrument covers a measuring range of 10–12 mm and is classified in the Micro class, suitable for fine mechanical parts and small internal bores. What resolution and accuracy can be expected? The device offers a readout resolution of 0.0001 mm and a stated measurement accuracy of ±0.003 mm, appropriate for precise inspection tasks. How are measurement results exported? Measurement data are exported via Wireless + USB interfaces, enabling integration into inspection software and direct logging of values into quality records. Which accessories and documents are included? Delivery comprises the micrometer in calibrated condition, the calibration certificate, and an adjustment ring for setup and verification. For which applications is this micrometer most suitable? The instrument is ideal for precision components, watchmaking, small bearing bores and similar applications where compact measuring range, repeatability and documented calibration are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1150mm Setting Gauge For Micrometers With Heat Shield, Ball Tip, 0.012mm Accuracy - Metav IndustryLine
Take advantage of high repeatability and a nominal length of 1150 mm combined with thermal protection for stable reference measurements; order the gauge directly via Metav Werkzeuge or consult the team for application-specific advice. Setting gauge for micrometres M304.322.2 – 1150 mm, thermal protection The Setting gauge for micrometres provides a stable, long-range length standard for calibrating external micrometres and checking length references in workshop and laboratory environments. 1150 mm nominal length Ball-shaped measuring faces Thermal protection to reduce expansion Calibrated accuracy 0.012 mm Stable reference for long-range micrometre setting The length standard is designed as a robust reference for adjusting and verifying external micrometres across an extended range. With a nominal length of 1150 mm, the device bridges the gap between bench micrometres and larger dimensional checks, enabling consistent setup of measuring instruments for long components. The combination of a rigid design and ball-shaped measuring faces ensures point contact that minimises local deformation, which is particularly important when aligning spindle tips or anvils on verification rigs. This yields a reliable baseline for subsequent measurements and process control. Consistent accuracy under varying conditions Engineered for repeatable results, the gauge delivers an indicated accuracy of 0.012 mm, making it suitable for many workshop and quality-control tasks that demand better-than-basic precision. The integrated thermal protection reduces the influence of ambient temperature fluctuations on the reference length, improving stability during routine use. Where traceable reference lengths are required for machine set-up or periodic checks, the gauge acts as an economical alternative to larger laboratory standards while still providing dependable performance for production environments. Practical handling and measurement ergonomics Fitted with spherical measuring faces, the instrument facilitates reproducible contact with micrometre anvils and external measuring spindles without introducing alignment stresses. The relatively lightweight construction simplifies handling on the shop floor and in inspection areas, while the profile supports safe placement on measuring stands or benches. As an accessory component in measuring workflows, the gauge shortens setup time and contributes to more efficient calibration loops for external thread and shaft measurement tasks. For purchase or technical clarification, contact Metav Werkzeuge directly — Metav IndustryLine quality guarantees practical precision and local stock from Emmerich; expert consultants are available to discuss application fit and delivery options Technical Data SKU: M304.322.2 GTIN: 4054469116860 Classification: 21170102 Facts Nominal length: 1150 mm Indicated accuracy: 0.012 mm Customs tariff number: 90173000 Special features Measuring faces: ball-shaped Special feature: thermal protection Category: Zubehör FAQ What is the primary use of this setting gauge? The setting gauge is intended as a reference for calibrating and setting external micrometres and for establishing length references up to 1150 mm in workshop and inspection environments. How precise is the gauge for routine checks? The gauge has an indicated accuracy of 0.012 mm, which is suitable for many production and workshop verification tasks where improved repeatability is required. Do the measuring faces affect contact reproducibility? Yes, the ball-shaped measuring faces provide defined point contact that reduces local deformation and improves reproducibility when setting external micrometres. Is the gauge suitable for use in variable-temperature environments? The built-in thermal protection reduces length changes due to ambient temperature fluctuations and enhances stability during normal use. Which SKU should be referenced when ordering or enquiring? Please reference SKU M304.322.2 when placing orders or requesting application advice for this setting gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12 mm Anvil Pair For Uni Micrometer, Disc Measuring Faces, Supplied As Pair - Metav IndustryLine
A matched set of 12 mm disc measuring faces and delivery as a precision-matched pair ensures consistent contact geometry and repeatable results in dimensional checks; the compact design keeps handling straightforward while the accessory remains easy to fit. Order the insert pair directly via Metav Werkzeuge or ask our consultants if needed. Insert pair for uni-micrometer, 12 mm disc measuring faces — Disc anvil set by Metav IndustryLine The insert pair for uni-micrometer, 12 mm disc measuring faces supplies precision-matched disc anvils for reliable contact on small diameters, intended for dimensional inspection and repeatable micrometric measurement tasks with a uni-micrometer Matched 12 mm disc measuring faces Delivered as a precision-matched pair Accessory for uni-micrometer contact replacement Compact, easy-to-fit disc anvils Repeatable contact geometry for reliable results The primary advantage of these disc measuring faces is repeatability: as a matched pair, the components preserve identical contact geometry so that successive measurements show minimal variability. In quality-control routines where parts are checked repeatedly, consistent anvil geometry reduces measurement scatter and simplifies statistical process control. The paired design is particularly useful when measuring small-diameter features or thin-walled components, where a stable contact surface limits deformation and secures reproducible readings during comparative or batch inspections. Quick replacement and efficient workshop handling Fitting the disc anvils is a maintenance-light operation that shortens downtime and keeps measuring instruments ready for production use. The compact inserts are supplied as a matched set, which eliminates the need to match individual faces on site and speeds up instrument servicing. With a total unit weight of 0.1 kg and slim geometry, the parts are straightforward to store and handle, supporting lean workshop practices and enabling rapid changeovers between measuring tasks without specialist tooling. Traceability and fit for purpose in metrology workflows Every accessory is identified for traceability and procurement: catalogue information and identifiers make it simple to record the M309.088.4 set in an inspection plan or calibration register. The design is intended as an accessory for standard uni-micrometers used in dimensional inspection and bench metrology. As part of the Metav IndustryLine, the set complements a broader portfolio aimed at democratising precision across workshops and small-scale production environments, providing accessible components that support consistent measurement quality. For availability, specification clarification or application advice on the Metav IndustryLine disc anvil set (M309.088.4), contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — for expert guidance and supply options Technical data Article number: M309.088.4 GTIN: 4054469117973 Manufacturer: Metav IndustryLine Tariff number: 90173000 Facts Diameter: 12 mm Weight: 0.1 kg EClass: 21170324 Special features Delivered in pairs Accessory for uni-micrometer Disc measuring faces for contact measurement Category: Measuring instruments › Accessory FAQ What is included in the delivery? The delivery includes the insert pair for uni-micrometer with 12 mm disc measuring faces, supplied as a precision-matched pair (SKU M309.088.4). Can these disc faces be fitted to any micrometer? The set is designed as an accessory for uni-micrometers; compatibility depends on the instrument’s anvil mounting. The Metav IndustryLine disc anvils are intended for standard-contact micrometer fittings. How do matched anvils improve measurement consistency? Matched anvils preserve identical contact geometry across both faces, reducing variability and improving repeatability in dimensional inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-16 mm Three-Point Bore Micrometer Pistol Grip, Colour Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of ISO 17025 calibration, wireless data transfer and a high-resolution 0.0001 mm readout for streamlined inspection routines; order the micrometer directly via Metav Werkzeuge or consult our specialists for integration advice. Three-point Internal Micrometer 12–16 mm (Wireless, Colour Touchscreen) by Microtech Metrology The three-point internal micrometer is a digital measuring instrument for precise internal diameter checks in production and quality inspection tasks. ISO 17025 calibrated with certificate Wireless and USB data output Colour 1.54" touchscreen display Precision ±0.003 mm for fine bore control Consistent bore control through measurable precision The three-point internal micrometer delivers reproducible results thanks to its ±0.003 mm accuracy and a fine 0.0001 mm reading step. For inspection tasks where repeatability reduces scrap and rework, this instrument provides a verifiable measurement chain: the numerical accuracy reduces uncertainty, while the readable resolution allows differentiation between borderline tolerances. The compact measuring range of 12–16 mm makes it particularly suitable for small-bore components in assemblies and precision parts production. Integrate measurement data directly into quality systems Equipped with Wireless+USB data output and a colour 1.54" touchscreen, the device simplifies data capture and documentation for statistical process control. Measurements can be transferred without manual transcription, cutting paperwork and preventing transcription errors. The integrated electronics and clear display support quick visual checks on the shop floor and traceable reporting in the laboratory. Delivery includes an ISO 17025 calibration certificate, which confirms the instrument’s conformity to accredited standards and supports compliance demands in regulated production environments. Practical design for repeatable internal measurements The instrument uses a three-point measuring principle to average contact around the bore, which improves centring and reduces eccentricity-related error when compared with two-point probes. The stated measuring depths of 65 + 150 mm accommodate both shallow and deeper bore geometries, enabling flexible application across a range of components. An ergonomic handle and carefully balanced measuring head support stable measuring gestures, which contributes to lower operator-induced variation and faster inspection cycles. Fit for workshop use and inspection labs alike With solid technical credentials and straightforward connectivity, the micrometer suits both workshop metrology and laboratory use. The combination of accredited calibration, digital readout and direct data export enhances throughput in batch inspections and first-article verification alike. For procurement and quality managers seeking to tighten process control, this instrument functions as a reliable link between manual measurement and digital quality records, helping to keep production tolerances under control. Contact Metav Werkzeuge today to discuss how Microtech Metrology’s ISO 17025‑calibrated three-point internal micrometer (SKU 133501610) can be integrated into existing QA workflows — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 133501610 GTIN: 4061905041778 Manufacturer: Microtech Metrology Core technical data Measuring range: 12–16 mm Measuring range min: 12 mm Measuring range max: 16 mm Resolution/readout: 0.0001 mm Accuracy: 0.003 mm Measuring depths: 65 + 150 mm Special features Digital display: Colour 1.54" touchscreen Data output: Wireless+USB Digital instrument: Yes ISO 17025 calibration: Yes ECLASS: 21170335 ETIM: EC003590 FAQ What accuracy can be expected for routine checks with this micrometer? The micrometer provides an accuracy of ±0.003 mm, suitable for fine bore control in precision manufacturing and inspection routines. Is a calibration certificate supplied with the instrument? Yes — the instrument is delivered fully calibrated with an ISO 17025 calibration certificate, confirming traceability and measurement validity. How are measurement results exported from the device? Measurement data can be exported via Wireless connection or USB, enabling direct integration with quality software and data logging systems. What is the useful measuring range and probe reach? The instrument covers a measuring range of 12–16 mm with measuring depths of 65 + 150 mm, allowing inspection of both shallow and deeper bores. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
12-16mm Three-Point Internal Measuring Gauge With Carbide Measuring Faces, Adjustable Ring, DIN 863, Supplied In Case - Metav IndustryLine
Benefit from 0.005 mm accuracy and tungsten carbide measuring faces for reproducible internal measurements; combine precise three‑point centring with a dedicated setting ring for reliable blind‑hole inspection — order the M312.133 three‑point internal micrometer directly via Metav Werkzeuge or consult our specialists for application advice. M312.133 Three‑point internal micrometer — 12–16 mm, carbide faces (Metav IndustryLine) The M312.133 is a three‑point internal micrometer for fine bore measurement in the 12–16 mm range, optimised for blind‑hole and confined‑space inspection. Three‑point internal micrometer 12–16 mm range Tungsten carbide measuring faces Accuracy 0.005 mm per DIN 863 Suitable for blind‑hole measurements Precision that removes doubt in small bores The instrument offers a measuring range of 12–16 mm with a guaranteed accuracy of 0.005 mm, which places it in the high‑precision class for mechanical internal measuring tools. The three‑point measuring system produces automatic centring in bores, reducing operator error and improving repeatability compared with two‑point gauges. The construction follows DIN 863, providing an internationally recognisable baseline for tolerance and conformity; this makes the device suitable for quality control tasks where traceable, comparable results are required. The analogue indicator design ensures instant visual feedback without dependence on batteries or digital electronics. Robust contact geometry for confined and blind holes Equipped with tungsten carbide measuring faces, the gauge resists wear and provides a stable measuring surface over prolonged use. The supplied setting ring (12 mm) allows quick verification and zeroing before a measurement series, which speeds up routine checks and reduces setup time on the shop floor. The three‑point head is explicitly suited to blind‑hole measurement, enabling reliable readings where depth and access are limited. The matt chrome‑plated scale and vernier improve legibility and resist glare under workshop lighting, supporting fast, confident readings during production inspections. Designed for workshop robustness and straightforward use The device combines a compact form with industrial durability to perform in daily production environments. The analogue mechanism requires minimal maintenance and avoids electronic failure modes, which favours long‑term availability in standard workshop conditions. Extensions (150 x Ø11.7) are available to adapt the instrument for specific setups, extending its utility without compromising measurement integrity. Built as part of the Metav IndustryLine, the gauge benefits from a quality‑controlled supply chain and a focus on tools that deliver professional results at an accessible price point, helping to simplify procurement and stock‑keeping in small to medium workshops. Contact Metav Werkzeuge for application advice and to request the M312.133 three‑point internal micrometer for your inspection tasks Technical Data Article number: M312.133 GTIN: 4054469119465 eClass: 21170335 ETIM: EC003590 Norm: DIN 863 Facts Measuring range: 12–16 mm Accuracy: 0.005 mm Setting ring: 12 mm Length: 80 mm Indication: analogue Special features Tungsten carbide measuring faces Matt chrome‑plated scale and vernier Suitable for blind‑hole measurements Extension: 150 x Ø11.7 Customs tariff number: 90173000 FAQ How does the three‑point system improve centring compared with two‑point gauges? The three‑point geometry ensures automatic centring within the bore; the M312.133 engages three equidistant contact points so readings are less affected by minor eccentricity, producing more repeatable internal diameters. Can the gauge be used for blind‑hole measurements? Yes, the design is optimised for blind‑hole inspection and the M312.133 specifically lists suitability for blind holes, allowing secure contact and reliable readings in confined depths. What verification method is delivered with the instrument? A setting ring (12 mm) is supplied for zeroing and quick verification of the measuring head prior to a measurement run, enabling traceable setup on the shop floor. Which standard governs the construction and tolerancing of this gauge? Manufacture and tolerance references conform to DIN 863, providing clear expectations for accuracy and interchangeability in professional metrology contexts. What are the measuring faces and scale finishes? The contact points are tungsten carbide, chosen for wear resistance, while the scale and vernier are matt chrome‑plated for improved legibility and corrosion protection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-16mm Three-Point Internal Micrometer Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high accuracy, wireless + USB data transfer and full ISO 17025 calibration with certificate for reliable measurements in precision workshops; order the three-point internal micrometre directly via Metav Werkzeuge or ask our consultants for tailored advice. Three‑Point Internal Micrometre – Digital internal measuring tool with wireless + USB and 1.5" colour touchscreen (Microtech Metrology) The Three‑Point Internal Micrometre is a compact digital instrument engineered for precise internal diameter measurement in small bores and precision components within the micro measurement category. *Digital display: 1.5" colour touchscreen *Wireless and USB data output *ISO 17025 calibrated with certificate *Measuring range 12–16 mm, 0.004 mm accuracy Accurate measurements for micro components Classified in the Micro category (suitable for very compact tasks), this instrument covers a measuring range of 12.0–16.0 mm, offering a practical reach for miniature assemblies and precision parts. The instrument combines a fine resolution of 0.0001 mm with a guaranteed accuracy of ±0.004 mm, which reduces measurement uncertainty and supports reproducible inspection results. Such precision is particularly valuable when inspecting small bores in sub‑assemblies where even slight deviations can affect fit and function. Traceable data capture and delivered calibration Designed for modern production environments, the micrometre provides wireless and USB connectivity for straightforward data transfer into inspection logs and SPC systems. The 1.5" colour touchscreen simplifies reading and setting adjustments on the shop floor, while the supplied setting ring ensures fast zeroing and repeatable reference points. The tool is supplied fully calibrated to ISO 17025 and includes a calibration certificate, enabling formal traceability and immediate use in processes that require accredited measurement results. Ergonomic handling that speeds up inspections The three‑point contact design centres measurement force, improving contact consistency inside bores and reducing operator‑induced variation. The compact format supports single‑hand operation in confined spaces and the intuitive touchscreen speeds routine checks, lowering cycle times and decreasing the likelihood of rework. The included setting ring and clear digital readout combine to make daily inspection routines both ergonomic and efficient. Integration into workshop quality routines With its digital outputs and compact form factor, the device integrates easily into existing inspection stations and handheld workflows. The substantial measuring depth of 230 mm provides versatility when accessing deeper bores or assemblies, while the three‑point mechanism ensures stable centring for reliable interior measurements. Together, these features support a consistent quality chain from initial inspection through to final acceptance. Contact Metav Werkzeuge in Emmerich for a suitability review or to request a quotation for this Microtech Metrology three‑point internal micrometre with ISO 17025 calibration; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 133701610 GTIN: 4061905074219 Manufacturer: Microtech Metrology ECLASS: 21170335 Facts Measuring range: 12.0–16.0 mm Resolution: 0.0001 mm Accuracy: ±0.004 mm Measuring depth: 230 mm Special features Digital colour 1.5" touchscreen Data output: Wireless and USB Included setting ring ISO 17025 calibration with certificate Three‑point internal measuring spindle FAQ What bore sizes can be inspected with this instrument? The Three‑Point Internal Micrometre is designed for bores in the 12.0–16.0 mm range and is classified in the micro category for compact internal measurements. Is the micrometre delivered calibrated for traceability? Yes, the instrument is supplied fully calibrated to ISO 17025 and includes a calibration certificate for immediate traceable use. How are measurement results transferred to a PC or inspection system? Measurement data can be transmitted via the micrometre’s wireless interface or exported using the USB connection for integration into inspection logs. What level of precision can be expected during routine checks? Routine measurements with the Three‑Point Internal Micrometre offer a resolution of 0.0001 mm and an accuracy of ±0.004 mm, suitable for high‑precision shopfloor inspections. Does the tool include accessories for initial setup? The micrometre is supplied with an inclusive setting ring to establish a reproducible zero reference and support repeatable measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
12-16mm Three-Point Internal Micrometer Digital With Measuring Drum Scale, IP65 - Metav IndustryLine
Taking advantage of 0.005 mm accuracy, a digital readout and rugged IP65 protection, this micrometer ensures repeatable internal measurements of small bores; order directly via Metav Werkzeuge or consult our specialists for application support. Three-point internal micrometer M312.233.M — digital, 12–16 mm range, IP65 The Three-point internal micrometer M312.233.M is a compact, workshop-ready instrument for precise internal and blind-bore measurement in fine‑mechanical and metalworking applications. Digital display with ABS/INC/UNIT functions Accuracy 0.005 mm for precise readings Measuring range 12–16 mm for small bores IP65 protection for workshop environments Precision in confined spaces for consistent quality The instrument delivers ±0.005 mm accuracy, achieved through a three‑point contact arrangement that centres reliably in small diameters and reduces alignment error. The compact 12–16 mm range classifies it among micro measuring tools for fine‑mechanical tasks where short anvils and low torsion are decisive. The clearly graduated measuring drum with scale and the digital display with ABS/INC/UNIT functions make reading and documenting values faster, reducing transcription errors during quality control and repetitive checks. Built to endure regular workshop use A matt‑chrome plated scale and vernier provide corrosion resistance and legible graduations, while hardened measuring faces ensure wear resistance at the contact points. The unit’s IP65 rating protects the electronics from dust and low‑pressure water jets, extending service intervals in machine shops. Supplied with a setting ring and extension (150×Ø11.7), the micrometer adapts to slightly recessed or awkward bores; the overall tool weight of around 1 kg balances stability and handling for one‑person operation. Digital output and efficient data handling Equipped with a data output RB 4.1, the device integrates into measurement chains or test benches for simplified data capture and traceable records. The display control set (ON/OFF/SET and ABS/INC/UNIT) enables immediate switching between incremental and absolute modes, supporting both manual checks and semi‑automated inspection routines. For workshop managers focused on throughput, the reduced reading time and direct data transfer improve process reliability and documentation efficiency. Contact Metav Werkzeuge for tailored advice on integration and application of the Metav IndustryLine three-point internal micrometer M312.233.M to ensure optimal measurement workflows Technical Data Article number: M312.233.M GTIN: 4054469156392 Weight: 1 kg Length: 80 mm Standard: DIN 863 SKU: M312.233.M Facts Measuring range: 12–16 mm Accuracy: 0.005 mm Resolution/display: 0.005 mm Protection class: IP65 Special features Digital display with ON/OFF/SET and ABS/INC/UNIT Data output: RB 4.1 Measuring drum with scale Hardened measuring faces Suitable for blind‑bore measurements Material: scale and vernier matt chrome‑plated Supplied with setting ring and extension (150×Ø11.7) FAQ How precise is this micrometer for small internal diameters? The three‑point internal micrometer M312.233.M provides an accuracy of 0.005 mm, making it suitable for high‑precision measurements of small bores and components. Can the device measure blind bores and slightly recessed holes? Yes. The instrument is designed for blind‑bore measurement and is supplied with a setting ring plus an extension (150×Ø11.7) for recessed or deep positions. Is the micrometer robust enough for workshop use? The M312.233.M features a matt‑chrome scale, hardened measuring faces and an IP65 rating, offering protection against dust and low‑pressure water jets commonly encountered in workshop environments. Does the micrometer support data transfer to inspection systems? The device includes a RB 4.1 data output, enabling connection to measurement data loggers or inspection software for traceable results. Which standard does the micrometer comply with? The tool is manufactured to DIN 863, reflecting established mechanical micrometer standards for dimensional measurement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-16mm Three-Point Internal Micrometer Self-Centering, Plastic Case - Metav IndustryLine
Take advantage of the combination of compact design, repeatable self‑centring measurement and wear‑resistant carbide faces to maintain consistent bore quality in small components. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Three‑point internal micrometer MS908.653 — self‑centring three‑point head, carbide measuring faces (Metav IndustryLine) A Three‑point internal micrometer MS908.653 engineered for precise measurement of blind bores in workshop and quality‑control environments. Self‑centring three‑point measuring head Carbide measuring faces for wear resistance Precise range 12–16 mm with 0.004 mm accuracy Compact 80 mm body length for confined spaces Accurate measurements in confined bores The three‑point geometry provides a self‑centring effect that stabilises the measuring axis in blind holes, reducing eccentricity and improving repeatability. With a declared accuracy of 0.004 mm and a vernier reading increment of 0.005 mm, this analogue instrument delivers the fine mechanical resolution expected in micro‑component inspection. The design minimises operator variation by ensuring the measuring anvils expand symmetrically, which translates into faster decision‑making during incoming inspection or in‑process checks. Small format, specialist capability Classified in the Micro category (measuring range 12–16 mm), the tool combines a short 80 mm body length with a compact head that is easy to manoeuvre inside tight bores. The carbide measuring faces resist wear during repetitive use, extending the interval between maintenance cycles and preserving measurement integrity. An adjustment ring (size 16) allows repeatable pre‑settings for batch measurements, so set‑ups for small series or precision assemblies remain consistent without excessive rework. Built for blind‑hole tasks and straightforward handling Designed specifically for blind‑hole measurement, the three‑point micrometer eliminates the need for improvised measuring aids. Its analogue, non‑electronic construction favours robustness in workshop conditions and simplifies routine maintenance compared with electronic gauges. The combination of mechanical simplicity and the self‑centring head reduces measurement time and supports reliable dimensional control of bores used in bearings, housings and valve seats. Workshop integration and supplier confidence Metav IndustryLine supplies a practical measuring solution that fits established inspection routines and supports traceable quality processes. The instrument’s proven geometry and durable contact faces make it suitable for precision toolrooms and production lines where compact accuracy is required. For specification matching, calibration options and integration into existing quality workflows, Metav Werkzeuge acts as a single, reliable partner with rapid technical guidance and supply across Europe. Contact Metav Werkzeuge today for tailored technical advice and reliable supply of the MS908.653 three‑point internal micrometer via Metav Werkzeuge GmbH in Emmerich Technical data Article number: MS908.653 Brand: Metav IndustryLine Category: Messschrauben Facts Measuring range: 12.0–16.0 mm Measuring range (min): 12 mm Measuring range (max): 16 mm Body length: 80 mm Accuracy: 0.004 mm Reading increment: 0.005 mm Adjustment ring: 16 Special features Self‑centring three‑point head Carbide measuring faces Designed for blind‑hole measurement Analog/vernier design Compact micro‑class instrument FAQ What types of bores is this instrument intended for? This three‑point internal micrometer MS908.653 is designed for precise measurement of blind bores and internal diameters within its 12–16 mm range. How precise is the measurement and what resolution is readable? The instrument offers an accuracy of 0.004 mm with a vernier reading increment of 0.005 mm, providing fine mechanical resolution suitable for micro‑component inspection. Are the measuring faces durable for repetitive workshop use? Yes, the micrometer is fitted with carbide measuring faces to increase wear resistance during repetitive measurements and to maintain dimensional integrity. Is the micrometer suitable for small‑batch production set‑ups? Its compact 80 mm body and adjustment ring (size 16) enable repeatable pre‑settings, making the MS908.653 well suited to small series and frequent set‑ups. Can calibration or certification be arranged for this instrument? Calibration options and certificates can be arranged through Metav Werkzeuge; contact the supplier for available services and lead times. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-16mm Three-Point Internal Micrometer Self-Centring, Delivered in Case - Metav IndustryLine
Compact three‑point internal micrometre with 0.005 mm resolution and a self‑centring measuring system delivers repeatable internal diameter checks; supplied in a protective case for secure transport and storage. Order the three‑point internal micrometre directly via Metav Werkzeuge or ask our consultants if needed. Three-point internal micrometre (12–16 mm) — self‑centring, 0.005 mm (Metav IndustryLine) The Three‑point internal micrometre is a compact, self‑centring instrument for precise internal diameter measurement in fine‑mechanical, toolmaking and inspection tasks. Self‑centring three‑point measuring system Resolution 0.005 mm Measuring range 12–16 mm Hardened measuring faces Measurement accuracy that supports narrow tolerances The instrument provides a 0.005 mm reading step and a mechanical design optimised for stable, repeatable results. The three‑point measuring system centres itself automatically in the bore, so concentricity errors are minimised and set‑up time is reduced. This makes the tool especially suitable where internal diameters must be checked rapidly across batches while maintaining consistent measurement accuracy. The analogue scale and fine adjustment allow controlled approach to the measurement surface, combining tactile feedback with precise indication. Robust construction for consistent inspection results A hardened contact geometry and solid spindle mechanics ensure long‑term stability under workshop conditions. The hardened measuring faces resist wear from repeated contact, which keeps measurement drift low over time and reduces rework. The mechanical design avoids electronic dependencies, offering immediate readiness in environments where simplicity and reliability are priorities. As a consequence, routine checks remain efficient and less prone to unexpected downtime. Compact handling for confined and precision applications With a measuring span of 12–16 mm, the instrument is compact and easy to handle in confined spaces typical of watchmaking, small component inspection and precision assembly. The short frame and ergonomic thimble support single‑handed operation and careful force control, which is essential when measuring delicate bores. In practical terms, the micrometre shortens inspection cycles and helps maintain process flow when numerous small internal diameters must be verified. Delivery scope and protective transport The product is supplied in a protective case for transport and safe storage, ensuring the instrument remains ready for use on arrival. The mechanical nature of the tool simplifies maintenance: periodic visual inspection and occasional lubrication of the spindle are sufficient to preserve performance. Clear marking and a robust construction make this instrument a dependable part of any quality control kit for precision internal measurement. For detailed application advice or to secure supply of the Metav IndustryLine three‑point internal micrometre M836.707, contact Metav Werkzeuge’s specialists in Emmerich — technical consultation and delivery coordination are available on request. Technical data SKU: M836.707 GTIN: 4061905041419 ECLASS: 21170335 ETIM: EC003590 Core technical data Measuring range: 12–16 mm Resolution (reading): 0.005 mm Stated accuracy: 0.005 mm Type: Analog / mechanical Special features Three‑point measuring system (self‑centring) Hardened measuring faces Supplied in protective case Category: Messschrauben / internal micrometres FAQ What is the measuring range of this instrument? The measuring range is 12–16 mm, suitable for small bore measurements and fine‑mechanical components. How fine is the scale on this micrometre? The micrometre has a reading step of 0.005 mm, enabling precise checks within narrow tolerances. Does the instrument centre itself in the bore? Yes, the three‑point design is self‑centring, which reduces concentricity errors during measurement. Are the measuring faces wear‑resistant? The instrument features hardened measuring faces to reduce wear and maintain consistent contact geometry. Is this a digital or analogue device? This is an analogue, mechanical micrometre designed for tactile control and immediate readiness. Which applications suit this micrometre best? Typical uses are fine assembly, toolmaking, watch and micro‑component inspection where compact internal measurements are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-16mm Three-Point Internal Micrometer With Adjustment Ring And Extension, 0.005mm Accuracy - Metav IndustryLine
The combination of three-point measurement, 0.005 mm accuracy and a compact 12–16 mm range ensures stable, repeatable internal readings for blind bores; the instrument is supplied with a setting ring, an extension and a transport case. Order the three-point internal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Three-point internal micrometer — Metav IndustryLine (12–16 mm, 0.005 mm) The Three-point internal micrometer is a precision instrument for centred internal diameter measurement of blind bores in fine mechanical and general metalworking applications. Three-point contact for centred readings Range 12–16 mm for micro measurements Accuracy 0.005 mm for fine inspection Stable centring for repeatable internal measurements A three-point measuring system guarantees automatic centring inside a bore, reducing alignment error and speeding up inspection loops. The triple-contact geometry stabilises the measurement axis, which together with the instrument’s 0.005 mm accuracy yields highly repeatable results even on short, deep blind holes. For production and quality-control environments this translates into fewer re-measures and more reliable pass/fail decisions, supporting efficient workflow and predictable throughput. Compact design tuned to micro-range applications Classified within the micro segment (12–16 mm), this model is tailored to fine-mechanical tasks where small size and rigidity matter. Short measuring members remain torsion-resistant and are therefore well suited to watchmaking, precision assemblies and toolroom checks. The instrument includes a matt chrome-plated scale and vernier for durable, low‑glare reading, plus practical accessories — a setting ring (size 12), a dedicated extension (100×Ø11.7) and a transport case — enabling immediate use at the bench or on the shop floor. Workshop-proven build for dependable inspection results The analogue vernier mechanism provides tactile, direct operation without electronics, offering a robust solution for routine inspection. The presence of defined measuring faces and a concise length of 75 mm keeps handling straightforward while the overall mass (0.8 kg) gives a reassuring feel during measurement. Designed for blind-bore measurement, the instrument reduces common measurement variability and integrates easily into existing inspection routines, making it a pragmatic choice where precise internal diameters must be documented reliably. For precision internal measurement tasks, contact Metav Werkzeuge to reserve this Metav IndustryLine three-point internal micrometer and discuss specific application requirements — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M312.133.P GTIN: 4054469158624 Manufacturer: Metav IndustryLine Category: Micrometers Facts Measurement range: 12–16 mm Reading / resolution: 0.005 mm Accuracy: 0.005 mm Length: 75 mm Weight: 0.8 kg Special features Three-point measuring system Suitable for blind bores Measuring faces included Scale and vernier matt chrome-plated Supplied with setting ring (12) and extension (100×Ø11.7) Analogue vernier operation Delivered in a transport case FAQ How precise is the instrument for internal diameters? The micrometer achieves an accuracy of 0.005 mm with a vernier reading of 0.005 mm, making it suitable for fine inspection tasks where sub‑hundredth‑millimetre precision is required. Can this tool measure blind holes? Yes — the three-point internal micrometer is specifically suited to blind-bore measurements and is designed to provide centred, repeatable readings in such applications. What accessories are supplied with the micrometer? The instrument is delivered with a setting ring (12), an extension (100×Ø11.7) and a transport case, allowing immediate deployment and protected storage during transport. Which workshop tasks is the instrument intended for? With its 12–16 mm range the tool sits in the micro class, ideal for fine-mechanical work, precision assemblies, toolroom checks and small-component inspection. Is the scale readable in bright shop conditions? The scale and vernier are matt chrome-plated to reduce glare and ensure durable, legible readings in typical workshop lighting environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-20 mm Three-Point Internal Measuring Gun Set With Two Measuring Heads, Bluetooth Digital Display - Metav IndustryLine
Benefit from fast, repeatable three‑point internal measurement, a 12–20 mm working range and high resolution with Bluetooth data output; the set combines ergonomic handling with traceable digital read‑out. Order the set directly via Metav Werkzeuge or contact our consultants for tailored advice. Pistol‑style three‑point internal micrometer set (M312.325.O) — digital, Bluetooth, 12–20 mm (Metav IndustryLine) The Pistol‑style three‑point internal micrometer set delivers rapid, self‑centring diameter checks for small bores and blind holes in the 12–20 mm range and is supplied as a ready‑to‑use set with two exchangeable heads Pistol‑style ergonomic design Measurement range 12–20 mm Resolution 0.001 mm digital display Bluetooth data output for traceability Rapid, repeatable bore measurement for production use The set is engineered for efficient internal diameter control in workshops and small‑batch production. The three‑point measurement principle centres automatically in the bore, reducing positioning errors and enabling consistent readings even in blind bores. The pistol grip and compact balance simplify one‑hand operation, shortening cycle times and minimising operator fatigue. With a measurement range of 12–20 mm and exchangeable heads covering sub‑ranges, the instrument is tailored to precision work on small components while remaining robust enough for routine inspection tasks. Traceable digital output and precise metrology A high‑resolution digital read‑out with 0.001 mm steps and a stated accuracy of ±0.004 mm supports stringent quality requirements and enables reliable pass/fail decisions. The display offers ON/OFF, SET, HOLD and mm/inch/MODE controls for flexible measurement workflows. Integrated Bluetooth output permits direct data transfer to inspection software or SPC systems, reducing transcription errors and ensuring measurement records are available for traceability and process control. The digital interface transforms manual checks into a documented part of the quality chain without complex retrofitting. Practical design and kit contents for workshop efficiency Delivered as a complete set, the package includes one pistol‑style measuring body and two exchangeable measuring heads, allowing quick adaptation between the supplied sub‑ranges. Hardened measuring faces are provided for durable contact and repeatable performance in typical shop conditions. The instrument’s pragmatic design balances stiffness and ergonomics: the pistol form eases access to recessed bores while the three‑point contact gives a reliable datum even on imperfect surfaces. For operators accustomed to mechanical gauges, the familiar tactile feel is retained alongside digital convenience. For reliable internal bore control and integrated data capture, contact Metav Werkzeuge to discuss the Metav IndustryLine pistol‑style three‑point internal micrometer set M312.325.O or to arrange specialist advice from our technical team at info@metav-werkzeuge.com Technical data Article number: M312.325.O GTIN: 4054469178479 ECLASS: 21170335 ETIM: EC003590 Tariff number: 90173000 Core measurements Measurement range: 12–20 mm Resolution/display step: 0.001 mm Accuracy: ±0.004 mm Weight: 1.71 kg Materials & features Digital display with ON/OFF/SET, HOLD and mm/inch/MODE keys Bluetooth data output Includes one measuring pistol and two exchangeable measuring heads Suitable for blind‑hole bores Pistol‑style three‑point internal measuring set Hardened measuring faces included FAQ What measurement range does the set cover? The pistol‑style three‑point internal micrometer set covers a measuring range of 12–20 mm, supplied with heads that allow quick changes between the included sub‑ranges. How precise is the instrument? The instrument provides a display resolution of 0.001 mm with a stated accuracy of ±0.004 mm, suitable for tight workshop tolerances and quality control sampling. Can the gauge measure blind holes? Yes, the design is suitable for blind‑hole bores; the three‑point contact system centres in the bore to deliver consistent readings even when extensions are not available. How is measurement data transferred and recorded? Data can be exported via Bluetooth to compatible inspection software or SPC systems, enabling digital traceability and reducing transcription errors during documentation. What is included in the delivery? Delivery comprises the pistol‑style measuring body and two exchangeable measuring heads, together forming a ready‑to‑use set for the 12–20 mm range. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-20mm Three-Point Inside Micrometer Self-Centering, 0.005mm Resolution, Supplied in Case - Metav IndustryLine
High-precision, self‑centring three‑point contact and carbide measuring faces combine to deliver repeatable internal measurements for small bores; order directly via Metav Werkzeuge or contact our technical advisers for application support. Three‑point internal micrometer M836.740 — 12–20 mm range, 0.005 mm accuracy (Metav IndustryLine) The Three‑point internal micrometer M836.740 is an analogue instrument for precision internal diameter measurement, conceived for fine mechanical work, toolmaking and quality inspection of small bores Self‑centring three‑point contact Measuring range 12–20 mm Accuracy 0.005 mm Carbide measuring faces Repeatable internal measurement with minimal operator influence The self‑centring, three‑point contact mechanism ensures the measurement datum forms automatically around the bore, so alignment errors are reduced and results become reproducible across operators. With a mechanical resolution of 0.005 mm and a stated accuracy of 0.005 mm, the instrument is optimised for tasks where small deviations matter, such as finished bores, bearing seats and precision assemblies. The analogue design keeps operation straightforward while the thimble and setting ring permit fine, tactile control over the measuring procedure. Durable contact surfaces and sustained metrological stability The hardened, carbide measuring faces resist wear that otherwise alters contact geometry and measurement reliability over time. This wear resistance means less frequent re‑grinding of faces and a more consistent uncertainty budget in routine inspection. The instrument’s analogue readout avoids electronic drift and is ideal where simple, robust inspection is preferred; the design suits both bench inspection and use near the machine where durability and immediate results are paramount. Practical set configuration for workshop workflows Delivered as a two‑piece set with extension capability, the configuration accommodates shallow and moderately deep bores while remaining compact for bench storage. The included setting ring (size 16) enables quick zero checks and keeps the measurement chain verifiable during production runs. Integration into quality routines is straightforward: the instrument supports frequent spot checks, incoming‑inspection sampling and validation of reamed or honed bores, reducing downtime by catching deviations early. Backed by Metav’s range and service ethos, the tool is a practical choice for workshops seeking affordable, dependable precision. Contact Metav Werkzeuge in Emmerich for tailored technical advice or a quotation on the Metav IndustryLine three‑point internal micrometer M836.740 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M836.740 GTIN: 4061905041211 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 12–20 mm Resolution: 0.005 mm Accuracy: 0.005 mm Pieces per set: 2 Extensions: 150 Setting ring: 16 Type: analogue (mechanical) Special features / Versions Self‑centring three‑point contact Carbide (HM) measuring faces Category: internal micrometer (three‑point) Analogue thimble operation Designed for small‑bore precision inspection FAQ What accuracy can be expected from this internal micrometer? The Metav IndustryLine three‑point internal micrometer M836.740 specifies an accuracy of 0.005 mm and a resolution of 0.005 mm, suitable for tight tolerance checks on small bores. Is the instrument supplied as a single item or a set? The product is supplied as a two‑piece set, which facilitates measurement of varying bore depths and supports workshop flexibility. What materials and applications is this instrument intended for? This internal micrometer is intended for measuring internal diameters in metal and precision components such as bearing seats, housings and machined bores in standard engineering materials. How can measurement repeatability be maintained in daily use? Repeatability is aided by the self‑centring three‑point contact; regular zero checks with the supplied setting ring and consistent measurement technique help preserve repeatable results. Are the measuring faces wear‑resistant? Yes, the instrument is fitted with carbide measuring faces, which provide improved wear resistance and extended stable service life compared with softer contact materials. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-20mm Three-Point Internal Micrometer Colour Touchscreen, ISO 17025 Calibrated Wireless/USB - Microtech Metrology
The combination of traceable ISO 17025 calibration, a 1.5-inch colour touchscreen and both wireless and USB data output provides reliable, shop-floor-ready internal measurement. Benefit from the repeatable centring of the three-point measuring principle and the time-saving delivery as a set of two—order or request specialist advice via Metav Werkzeuge for fast procurement and technical consultation. Three-point internal micrometer — digital, ISO 17025-calibrated (Microtech Metrology) The Three-point internal micrometer is a digitally equipped instrument for precise internal diameter measurement in the 12–20 mm range, intended for quality control, toolmaking and fine mechanical inspection. ISO 17025 calibrated for traceable results Wireless and USB data output for seamless integration 1.5-inch colour touchscreen for clear, rapid readings Traceable precision for internal bores The three-point measuring principle ensures centring stability and reduces eccentricity errors when checking internal diameters between 12–20 mm, delivering a measurable improvement in repeatability over two-point gauges. Supplied fully ISO 17025 calibrated, the instrument includes a calibration certificate so measurement records are immediately traceable and suitable for formal quality audits. This level of documented accuracy supports reproducible inspection routines and reduces uncertainty in acceptance decisions. Fast data capture and integration with production systems Equipped with wireless and USB outputs plus a 1.5-inch colour touchscreen, the unit eliminates manual transcription and accelerates data flow into inspection software and SPC systems. The clear touchscreen readout shortens cycle times for each measurement and reduces operator error, while the connectivity options support both immediate logging and batch transfer. Delivered as a set of two, the configuration suits parallel inspection stations or a quick tool change workflow, improving throughput in small-series and repetitive inspection tasks. Robust handling and adaptable measuring reach Designed for regular shop-floor use, the instrument combines a compact head with extended measuring reach options shown by the measuring depth 80 + 150 mm, enabling checks of shallow and deeper internal features without multiple instruments. The digital readout and three-point contact minimise operator influence on results, promoting consistent measurements across shifts. Built for integration into a productive inspection environment, the device pairs technical reliability with straightforward handling to support day-to-day quality routines. Choose Microtech Metrology's ISO 17025-calibrated three-point internal micrometer via Metav Werkzeuge in Emmerich for assured traceability and expert procurement support Technical data Manufacturer: Microtech Metrology SKU: 133371220 GTIN: 4061905074370 Eclass: 21170335 ETIM: EC003590 Digital display: Color 1.5" Touchscreen Data output: Wireless + USB ISO 17025 calibration included Set: 2 pieces Product type: Three-point internal micrometer Facts Measurement range: 12.0–20.0 mm Measuring depth: 80 + 150 mm Pieces per set: 2 Display size: 1.5 in Special features Three-point measuring principle Colour touchscreen readout Wireless and USB connectivity Supplied with calibration certificate (ISO 17025) Delivered as a set of two Suitable for internal diameter measurement FAQ Is the micrometer delivered calibrated to a recognised standard? Yes. The Three-point internal micrometer from Microtech Metrology is delivered fully calibrated with an ISO 17025 calibration certificate. What measurement range does the instrument cover? The instrument measures internal diameters in the 12.0–20.0 mm range. How is measurement data exported from the device? Data can be exported wirelessly or via USB from the Microtech Metrology three-point internal micrometer for integration with inspection software. What does the stated measuring depth of 80 + 150 mm mean? The figures indicate the available reach options for internal measurement, allowing checks of both shallower and deeper internal features without changing the instrument configuration. How many pieces are included in the delivery set? The product is supplied as a set of two, allowing parallel use or rapid replacement during inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
12-20mm Three-Point Internal Micrometer Digital With Measuring Drum Scale, IP65 - Metav IndustryLine
Take advantage of precise blind‑hole inspection and robust workshop operation thanks to the combination of a digital readout with ABS/INC functions, IP65 protection and carbide measuring faces for long service life; order the set directly via Metav Werkzeuge or ask the consultants for application advice. Three-point internal micrometers M312.275.M — Digital set for blind‑hole and small‑bore measurement, 12–20 mm, Metav IndustryLine Three-point internal micrometers M312.275.M provide a compact, workshop‑ready solution for accurate measurement of small bores and blind holes in production and maintenance environments. Digital display with ABS/INC/UNIT keys IP65 dust and splash protection Carbide measuring faces for wear resistance Includes setting ring and extension Precision tailored to miniature bores for consistent quality control The three‑point measuring principle delivers concentric contact around the bore, which stabilises readings and reduces positioning error compared with single‑point probes. In the 12–20 mm range this instrument classifies as a micro measuring tool, ideal where compactness and high repeatability matter — for example in watchmaking, valve seats and small hydraulic components. The carbide measuring faces resist wear, so calibration intervals extend and measurement costs fall; conformity with DIN 863 ensures the mechanical design meets recognised workshop standards. Clear digital readout and industrial connectivity for faster throughput A digital display with ON/OFF/SET and ABS/INC/UNIT keys gives unambiguous readings and quick switching between absolute and incremental modes, reducing transcription errors during batch inspection. The measuring drum includes a dedicated scaling feature for tactile fine adjustment, while the RB 4.1 data output provides a direct interface for data collection and SPC logging — enabling immediate traceability and integration into existing quality workflows. The IP65 protection rating keeps electronics safe from chips and coolant mists, supporting reliable use at the bench or on the shop floor. Practical set‑up and accessories to streamline measurement tasks Delivered as a two‑piece set with a setting ring and a 150 × Ø11.7 mm extension, the instruments are ready for fast set‑up and for measuring blind holes without complex adapters. The compact weight and robust finish make the set easy to handle in repetitive tasks, while the matt‑chrome scale and vernier surfaces aid legibility under workshop lighting. Because the design focusses on durability and simple operation, inspection routines become quicker and less error‑prone, which improves process yield and reduces rework. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine three‑point internal micrometer set M312.275.M can improve bore inspection in your production — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for tailored advice and delivery information. Technical data SKU: M312.275.M GTIN: 4054469162454 Manufacturer: Metav IndustryLine Norm: DIN 863 Protection class: IP 65 Key figures Measuring range: 12–20 mm Minimum range: 12 mm Maximum range: 20 mm Resolution / reading: 0.005 mm Weight: 1.8 kg Pieces per set: 2 Extension: 150 × Ø11.7 mm Materials & features Scale and vernier matt chrome‑plated Carbide measuring faces (hard metal) Measuring drum with scaling Digital readout with ON/OFF/SET and ABS/INC/UNIT keys Data output: RB 4.1 Suitable for blind‑hole measurements Delivered as a set with setting ring and extension Set design for workshop and production use FAQ What measurement range is covered by the set? The instruments cover a measuring range of 12–20 mm, making them suitable for small‑bore inspection tasks in fine mechanical and general workshop applications. Can the micrometers measure blind holes? Yes, the set is explicitly suitable for blind‑hole measurements and is supplied with a fitting extension (150 × Ø11.7 mm) to reach into recesses. How is the display operated and what modes are available? The digital display features ON/OFF/SET and ABS/INC/UNIT keys, allowing instant selection of absolute or incremental measurement modes for flexible inspection routines. Is the instrument protected for use in production environments? The micrometers have IP65 protection for resistance against dust and splashes, and the carbide measuring faces provide wear resistance for prolonged workshop use. Does the set support data logging? Yes, the instruments provide a RB 4.1 data output for connection to data collection systems and SPC processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-20mm Three-Point Internal Micrometer For Blind Holes With Setting Ring And Extension - Metav IndustryLine
Take advantage of the combination of three-point internal measurement, ±0.005 mm accuracy and practical accessory supply for reliable inspection in confined bores; order the set directly via Metav Werkzeuge or ask our consultants if clarification is required. Dreipunkt-Innenmessschraube – three-point internal micrometer set (12–20 mm), analogue, Metav IndustryLine Dreipunkt-Innenmessschraube is a compact three-point internal micrometer designed for precise measurement of blind holes and small bores in demanding workshop environments. 0.005 mm accuracy for fine measurement 12–20 mm measuring range Three-point design for blind-hole measurement Includes setting ring and extension Precise micro-range measurement for blind bores The three-point internal micrometer delivers repeatable internal diameters within a 12–20 mm span, classifying it in the Micro segment for extremely compact precision work. Its mechanical construction and hardened measuring faces reduce deformation and maintain stability when probing deep or restricted bores. With a stated accuracy of ±0.005 mm, the instrument is suited to fine mechanical inspection tasks where small deviations matter; the analogue nonius scale gives a direct, reliable readout and the matt chrome-plated scale and vernier resist glare in bright inspection areas. Consistent results through simple adjustment and readout Designed as a practical workshop tool, this analogue internal measuring screw is supplied as a two-piece set and includes a setting ring (Ø16 mm) plus an extension (100 × Ø11.7 mm) for measurements in deeper blind holes. The setting ring enables quick verification of the contact faces before series inspection, while the extension maintains alignment when access is limited. The combination of robust mechanical guidance and precise contact geometry reduces operator-induced scatter, supporting efficient quality checks and shorter inspection cycles. Durable design that integrates with standard quality routines Materials and finishing are selected for everyday workshop use: the scale and vernier are matt chrome-plated, and the measuring faces are treated for longevity. Supplied as a set, the tool covers the targeted measuring span without frequent tool changes, simplifying storage and traceability on the shop floor. At a weight of 1.3 kg for the complete set, handling is stable yet manageable during routine measurements. The construction supports integration into existing verification workflows and complements manual gauges and gauge blocks used in typical machine-shop inspection stations. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine three-point internal micrometer set into inspection routines and to secure the appropriate configuration for blind-hole measurement. Technical data Article number: M312.685 GTIN: 4054469120362 eClass: 21170335 ETIM: EC003590 Customs tariff: 90173000 Facts Measuring range: 12–20 mm Accuracy: ±0.005 mm Weight: 1.3 kg Pieces per set: 2 Setting ring: Ø16 mm Extension rods: 100 × Ø11.7 mm Analogue (nonius) Category: measuring micrometers Special features Matt chrome-plated scale and vernier Hardened measuring faces Suitable for blind-hole measurement Includes setting ring and extension Delivered as a set FAQ How is the three-point internal micrometer used for blind holes? The three-point internal micrometer measures internal diameters by expanding its contact tips to the bore walls; the supplied setting ring and extension allow the Dreipunkt-Innenmessschraube to be set and applied reliably in blind bores, preserving alignment during reading. What measurement accuracy can be expected? The instrument specifies an accuracy of ±0.005 mm, which places the tool in the fine-precision category suitable for demanding inspection tasks where deviations of a few micrometres are critical. Does the set include accessories for deeper bores? Yes. The set contains a setting ring (Ø16 mm) and an extension (100 × Ø11.7 mm), enabling secure measurement in deeper or hard-to-reach blind holes with consistent contact geometry. For which applications is this measuring screw most suitable? This compact measuring set is ideal for precision work in confined spaces: small-bore inspection, toolroom checks, fixture validation and micro-mechanical assemblies that require 12–20 mm internal verification. How many instruments are delivered in the set? The product is supplied as a two-piece set, providing coverage and convenience for bench inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12-20mm Three-Point Internal Micrometer Pistol Grip, Colour 1.54" Touchscreen, Wireless/USB, ISO 17025 - Microtech Metrology
Benefit from laboratory-grade traceability and high-resolution measurement: the ISO 17025-calibrated certificate ensures conformity, the digital colour touchscreen and Wireless+USB data output streamline logging, and the 12–20 mm range with ±0.003 mm accuracy supports repeatable bore control; order directly via Metav Werkzeuge or consult our specialists for application advice. Three-point internal micrometer by Microtech Metrology — 12–20 mm, digital touchscreen The three-point internal micrometer provides precise internal diameter measurement for fine mechanical and watchmaking applications, combining a compact 12–20 mm measuring range with laboratory calibration for reliable traceability. ISO 17025 calibration certificate included High accuracy ±0.003 mm for repeatable results Colour 1.54" touchscreen display Wireless and USB data output Reduce rejects with measurable accuracy The instrument is built for tasks where tolerances matter: the combination of a ±0.003 mm accuracy and a readout resolution of 0.0001 mm provides the numerical basis for decisive go/no‑go decisions. Delivered as a matched pair, the set format supports comparative checks and faster batch inspection. Because the device is issued with an ISO 17025 calibration certificate, audit trails and quality documentation are simplified; this reduces rework rates and protects process stability in serial production or laboratory environments. Integrated data flow for modern quality systems Electronic data transfer via Wireless and USB interfaces and the Colour 1.54" touchscreen make measurement capture immediate and error‑resistant. The digital output supports connection to SPC or inspection software, removing manual transcription and speeding cycle times. The clear, touch-operated display presents values and status at a glance, while the digital measurement chain preserves measurement integrity for later evaluation. Such connectivity turns single measurements into usable production data with minimal operator effort. Compact design for micro‑work and delicate components With a measuring range of 12–20 mm, this micrometer falls into the micro class suited to fine mechanical work, including watch components, small bearings and precision housings. The three-point measuring system centres automatically in bores for stable contact and consistent results; the listed measuring depths of 65 + 150 mm permit access to recessed features. The device is robust enough for regular workshop use yet refined for laboratory tasks, delivering a balance of handling comfort and metrological performance that supports both craftsmen and quality engineers. For precision-controlled bore measurement and to secure Microtech Metrology's ISO 17025‑calibrated three-point internal micrometer, contact Metav Werkzeuge for expert guidance and ordering. Technical data SKU: 133571220 GTIN: 4061905041624 Brand: Microtech Metrology Digital display: Colour 1.54" touchscreen Data output: Wireless + USB Calibration: ISO 17025 certificate supplied Set contents: 2 pieces Core technical data Measuring range: 12–20 mm Measuring depth: 65 + 150 mm Accuracy: ±0.003 mm Readout / resolution: 0.0001 mm Special features Three-point internal measuring anvils Digital micrometer with touchscreen Wireless and USB connectivity Delivered calibrated to ISO 17025 with certificate Supplied as a matched set of two pieces ECLASS: 21170335 ETIM: EC003590 FAQ Is the micrometer delivered with a calibration certificate? Yes. The three-point internal micrometer from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability. How are measurement values exported to a PC or quality system? Measurement data can be transmitted via the device's Wireless and USB interfaces; the three-point internal micrometer (SKU 133571220) supports straightforward integration into SPC or inspection software. What applications suit the 12–20 mm measuring range? The 12–20 mm range is ideal for micro‑work such as watch components, small bearings and precision housings; the three-point measuring system ensures centred contact for consistent internal diameter measurement. What accuracy and resolution can be expected in routine use? The instrument provides an accuracy of ±0.003 mm with a display resolution of 0.0001 mm, making it suitable for high‑precision shops and laboratory quality control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
12-20mm Three-Point Internal Micrometer Self-Centreing, 0.005mm Graduation, Supplied In Case - Metav IndustryLine
Benefit from self‑centring three‑point measurement, carbide measuring faces and a 0.005 mm vernier resolution to perform reliable blind‑hole checks in the micro range; order this precision set directly via Metav Werkzeuge or consult our experts for application guidance. Three‑point internal micrometer MS908.672 — 12–20 mm range, 0.005 mm vernier (Metav IndustryLine) The Three‑point internal micrometer MS908.672 is an analogue, self‑centring gauge designed for accurate measurement of blind bores within the micro range, where compact size and repeatable centring are essential. Self‑centring three‑point measurement Carbide measuring faces for wear resistance Resolution 0..005 mm for fine readings Precision where small tolerances matter This instrument is tailored to the micro range (12–20 mm), a segment where stiffness and compactness determine repeatability. The three‑point geometry automatically centres in blind bores, reducing operator alignment error and speeding up routine checks. With an analogue vernier reading at 0.005 mm, the gauge enables fine discrimination that supports tight tolerances without the complexity of digital systems. The compact format is especially useful in repair benches, toolrooms and micro‑assembly stations where space and manoeuvrability are constraints. Durable construction for frequent shop use Key contact surfaces are fitted with carbide measuring faces, providing excellent resistance to wear and abrasion and maintaining measurement integrity over many cycles. The instrument’s analogue vernier construction offers a robust, low‑maintenance solution for production environments. An adjustment ring (16) allows controlled settling of the measuring head, while the solid mechanical design minimises play and drift during repeated inside measurements. Practical set composition and extendibility Supplied as a set of two, the micrometers offer complementary coverage for daily shop workflows and quick changeover between inspection tasks. Extensions of 150 mm are available for deeper blind bore access, enabling the same measuring principle to be applied where reach is required. The compact set format reduces tool change time and simplifies storage for inspection kits on the shop floor. Application suitability and operator benefit Designed specifically for blind‑hole measurement, the gauge removes the need for complex adapters in many common tasks. The self‑centring action reduces the influence of operator alignment, while the fine vernier graduation supports confident pass/fail assessments in first‑operation inspection and incoming goods control. The analogue nature makes it straightforward to interpret results and integrate the device into established quality routines without training overhead. For tailored technical advice or to reserve this two‑piece precision set, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: MS908.672 Type: Three‑point internal micrometer Brand: Metav IndustryLine Designation: Three‑point internal micrometer Measurements Measuring range: 12.0–20.0 mm Resolution (reading): 0.005 mm Adjustment ring: 16 Set quantity: 2 pieces Special features Self‑centring three‑point system Carbide measuring faces Analogue vernier scale Suitable for blind‑hole measurement Extensions: 150 mm FAQ What measuring range does the instrument cover? The Three‑point internal micrometer MS908.672 covers a measuring range of 12.0–20.0 mm, placing it in the micro range suitable for fine mechanical work. Is this gauge suitable for blind‑hole inspection? Yes — the self‑centring three‑point design is specifically intended for blind‑hole (Sackloch) measurement and ensures reliable centring in such applications. How fine is the reading and how is it read? The analogue vernier provides a reading resolution of 0.005 mm; readings are taken from the vernier scale, offering precise manual measurement without electronics. Are the measuring faces robust enough for regular use? Measuring faces are made of carbide, giving the MS908.672 high wear resistance and long service life even under frequent shop use. Does the delivery include extensions and how many pieces are supplied? The delivered set comprises two instruments and includes extensions of 150 mm to extend reach into deeper blind bores. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200-1400mm Digital Outside Micrometer With IP65, Friction Ratchet, Ø50mm Anvils, ISO 17025 Calibration Certificate - Microtech Metrology
Take advantage of the combination of a 1,200–1,400 mm measuring span, robust IP65 protection and an ISO‑17025 calibration certificate for reproducible, shop‑floor measurements of large components; order directly via Metav Werkzeuge or consult the technical team for application advice. CertiMet digital micrometer by Microtech Metrology — 1,200–1,400 mm range, IP65 The CertiMet digital micrometer is a large‑range outside micrometer designed for precise diameter and thickness measurement of sizeable components in heavy machining and fixture construction. Large 1,200–1,400 mm measuring span IP65 dust and splash protection ISO 17025 calibration certificate included Digital readout with 0.001 mm resolution Reliable accuracy for large components A large‑span measuring instrument that keeps accuracy where many gauges lose it: the device delivers a resolution of 0.001 mm and a stated accuracy of ±0.02 mm, enabling consistent decisions on fit and tolerances for big parts. Classified in the Lang (1,000–2,000 mm) category, this outside micrometer balances reach and stiffness so that measurements over long distances remain reproducible. The combination of a fine digital scale and substantial measuring faces minimises local deformation; the Ø50 mm contact pads spread clamping forces to reduce part marking and variation. Built for the shop floor — robust, sealed and user‑friendly The instrument is engineered for industrial environments: the IP65‑rated digital head resists dust and water jets, while a built‑in friction ratchet ensures constant contact pressure for repeatable readings. Heavy‑duty construction and an overall weight of 11 kg are signs of a tool intended for demanding handling rather than delicate bench use. Delivery includes setting rods for quick zeroing and adjustment on reference standards, allowing straightforward setup before production checks begin. The sealed electronics and tactile micrometer spindle together reduce the need for frequent maintenance and support continuous operation in harsher conditions. Traceability and compliance for quality workflows Calibration is supplied as a documented service: the gauge is delivered fully calibrated with an ISO 17025 certificate (Ilac MRA), providing independent traceability that integrates with quality systems and audit trails. This traceable calibration supports acceptance in regulated processes and reduces internal calibration workload. The robust digital readout simplifies logging measurements, and the instrument’s specification suits inspection of welded assemblies, large housings and heavy rotating parts where certainty and documented conformity are required. For measurement tasks that demand wide reach, robust protection and documented traceability, contact Metav Werkzeuge to discuss the suitability of the Microtech Metrology CertiMet digital micrometer for specific applications and to arrange procurement or further technical information Technical Data SKU: 110171401 GTIN: 4061905040412 Manufacturer: Microtech Metrology Facts Measuring range: 1,200–1,400 mm Resolution (display): 0.001 mm Accuracy: ±0.02 mm Measuring faces: Ø50 mm Weight: 11 kg Protection class: IP65 Special features Digital readout, large‑range micrometer head Friction ratchet for consistent measuring force Setting rods included Calibration certificate (ISO 17025, Ilac MRA) Shop‑floor capable construction FAQ What measuring range does this micrometer cover? The micrometer covers a measuring span of 1,200–1,400 mm, suitable for large components and classified as a Lang‑range instrument. Is the instrument suitable for use in dusty or damp environments? Yes, the device features an IP65 rated digital head, making the micrometer resistant to dust ingress and water jets during routine shop‑floor use. Does the product come with a calibration certificate? A full calibration is supplied with the micrometer, and the instrument is delivered with an ISO 17025 calibration certificate for traceability and audit purposes. What is the measurement resolution and declared accuracy? The digital readout provides a 0.001 mm resolution and a declared accuracy of ±0.02 mm, balancing fine reading capability with practical industrial tolerances. Are accessories supplied with the gauge for setup? The micrometer is delivered with setting rods included to simplify zeroing and alignment to reference standards. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1200-1400mm Handheld Micrometer With Colour Touchscreen, Wireless/USB Data, ISO 17025 Calibration Certificate - Microtech Metrology
Take advantage of a long-range measuring capacity, integrated data connectivity and an ISO 17025 calibration certificate for repeatable results on large components; order via Metav Werkzeuge or consult the Metav team for application advice. Microtech DataMet C-frame Micrometer — long-range micrometer with integrated microcomputer and wireless data output The Microtech DataMet C-frame micrometer is a heavy‑duty measuring instrument designed for long-format bench measurements in toolrooms and production lines, combining a large measuring span with digital data handling for industrial metrology applications. Large 1,200–1,400 mm measuring range Colour touchscreen and integrated microcomputer Wireless and USB data output ISO 17025 calibration certificate included Measure large assemblies with assured stiffness and repeatability The instrument is built for long-range measurement tasks where stability matters: with a 1,200–1,400 mm span and Ø50 mm measuring faces, the large contact area reduces local deformation and delivers more consistent contact conditions on sizeable components. The solid, CNC machined aluminium housing provides rigidity across the full traverse, improving reproducibility when gauging shafts, housings or large fixtures. At around 11 kg, the unit remains manageable for workshop use while offering the mass and structural integrity needed for reliable long‑length readings. Traceable results and clear measurement quality Delivered with an ISO 17025 calibration certificate, the instrument supports quality systems that require full traceability. The display offers a fine reading resolution of 0.0001 mm, while the instrument accuracy is specified at ±0.016 mm, reflecting the distinction between displayed resolution and achievable measurement uncertainty on very long spans. The integrated electronics handle linear and temperature compensation and provide functions such as max/min, statistical summaries and formula modes, which streamline in‑process checks and reduce transcription errors during routine inspection work. Integrated data flow to support Industry 4.0 workflows Connectivity is a core benefit: the device provides Wireless and USB HID data transfer, compatibility with a dedicated app ecosystem and optional Modbus RTU for PLC integration. The internal memory manager stores up to 2000 values with folder organisation and statistics, supporting short‑term SPC without constant PC connection. These features reduce manual entry, accelerate reporting and help maintain a closed, auditable measurement chain across the production floor. The combination of digital functions and robust mechanics makes the instrument suited to automated or semi‑automated metrology stations. Choose the Microtech DataMet C‑frame micrometer for long-span, traceable measurement — contact Metav Werkzeuge in Emmerich for tailored advice or to arrange supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 110181408 GTIN: 4061905039713 Brand: Microtech Metrology Measuring range: 1,200–1,400 mm Weight: 11 kg Facts Reading resolution: 0.0001 mm Accuracy: ±0.016 mm Measuring faces diameter: Ø50 mm Internal memory: 2000 values Special features Colour touchscreen and integrated microcomputer Wireless and USB HID data transfer Optional Modbus RTU (RS‑485) for industrial networks Memory manager with folders and statistics mode CNC machined aluminium housing Industry 4.0 compatible MICS system and instrument hub Functions: max/min, Go/NoGo, formula, timer, linear and temperature correction Calibration certificate ISO 17025 (Ilac MRA) included FAQ What measurement span does the instrument cover? The micrometer covers a 1,200–1,400 mm range, making it suitable for long components and assemblies where a single‑pass measurement is required. Is the instrument delivered calibrated and traceable? Yes, the unit is supplied with an ISO 17025 calibration certificate, ensuring traceability and conformity with laboratory quality systems for the Microtech DataMet C‑frame micrometer (SKU 110181408). How are measurement values exported for analysis? Values can be exported wirelessly or via USB HID; an optional Modbus RTU output is available for direct integration into industrial control systems and PLCs. What level of display resolution and practical accuracy can be expected? The display offers a 0.0001 mm resolution for clear readouts, while the practical measurement uncertainty on long spans is specified as ±0.016 mm, reflecting mechanical and application limits. Can the instrument store data on board for later transfer? Yes, the internal memory holds up to 2000 values with folder organisation and basic statistics for batch or session‑based logging. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125 mm Gauge Block For Micrometer Setting With Thermal Shield, Accuracy ±0.0025 D 8 mm - Metav IndustryLine
Combine reliable reference length with workshop durability: a 125 mm nominal gauge with ±2.5 µm accuracy and integrated thermal protection provides repeatable micrometer set‑ups and reduces adjustment time. Order the setting standard directly via Metav Werkzeuge or consult our advisers for application guidance. Micrometer setting standard M304.313 — 125 mm, ±2.5 µm (Metav IndustryLine) The Micrometer setting standard M304.313 is a precision accessory for setting and checking micrometer outside‑measurement spindles in workshop and calibration environments. 125 mm nominal length High calibration accuracy ±2.5 µm Flat, lapped measuring faces With thermal protection Reduce setup uncertainty with traceable reference values A compact, stable gauge with a 125 mm nominal length delivers a defined reference for setting micrometer anvils and spindles. The declared accuracy of ±2.5 µm (0.0025 mm) translates into significantly lower setup variability compared with informal references, which speeds first‑run approvals and reduces scrap. By using a dedicated setting standard, tolerance stacks are controlled at the point of measurement — a pragmatic, performance‑led approach for routine workshop quality control. Workshop‑grade construction for consistent handling Engineered with flat measuring faces and an 8 mm diameter seating, the gauge offers a secure contact geometry that resists tilt during adjustment. The design includes thermal protection, which moderates short‑term temperature influences during handling and prevents immediate thermal drift while the tool is in use. At approximately 0.1 kg, the component is lightweight and easy to position, supporting quick repeat checks without introducing significant handling fatigue. Practical benefits for measurement workflows As a dedicated setting accessory, the standard provides reproducible reference distances for outside measurements and supports faster, more reliable micrometer adjustments. The accessory is listed under accessory categories and is suitable for integration into workshop metrology routines where reproducibility and throughput matter. For laboratories aiming to tighten tolerances, this gauge functions as a cost‑effective reference that complements existing measurement chains and quality documentation. For reliable integration into measurement workflows and specific application advice, request the Micrometer setting standard M304.313 from Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M304.313 GTIN: 4054469116648 eClass: 21170102 Tariff number: 90173000 Brand: Metav IndustryLine Numbers / Core technical data Nominal length: 125 mm Accuracy: ±0.0025 mm (±2.5 µm) Weight: 0.1 kg Diameter: 8 mm Special features / Versions Flat measuring faces With thermal protection Intended use: setting micrometer outside‑measurement spindles Category: Accessory (Zubehör) FAQ What is the primary purpose of this gauge? The Micrometer setting standard M304.313 is intended as a precision reference for setting and verifying micrometer outside‑measurement spindles in workshops and inspection areas. What level of accuracy can be expected? Declared accuracy for the Micrometer setting standard M304.313 is ±2.5 µm (0.0025 mm), suitable for tight workshop tolerances and routine quality checks. Is a calibration certificate supplied with the gauge? A calibration certificate is not specified in the provided product data for the Micrometer setting standard M304.313. What are the measuring faces like? The device is supplied with flat measuring faces, providing stable, repeatable contact for outside‑measurement set‑ups. Can this accessory be used directly in a production environment? Yes. The Micrometer setting standard M304.313 is designed for workshop use where reproducible, quick set‑ups are required to maintain process stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-1000mm Internal Micrometer Digital With IP65 Protection, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high measurement accuracy, robust IP65 protection and traceable ISO 17025 calibration for reliable in‑process checks and quality assurance. Order the internal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Internal micrometer by Microtech Metrology — digital readout, IP65 protection A precision internal micrometer designed for internal diameter measurement of large components and fixtures across machining, toolmaking and quality control applications. Digital readout with mm/inch and hold IP65 protection for harsh environments Calibrated to ISO 17025, certificate included Friction ratchet for consistent measuring force Precise measurement for large components with a wide working range The instrument covers a measuring range of 125–1,000 mm, making it suitable for larger bores and assemblies where repeatability over long spans is required. The construction focuses on profile stiffness and stable guide geometry to reduce bending and variability during measurement. With an accuracy of ±0.02 mm, the device provides reliable numerical results for workshop and inspection tasks where tolerance chains demand consistent data rather than laboratory micro‑precision. The extended reach reduces the need for multiple specialised gauges while keeping handling manageable. Clear digital readout and operator aids for fast inspections Equipped with a digital display offering ON/ABS/SET/HOLD functions and mm/inch switching, the gauge simplifies readout and data recording during batch checks. The display resolution of 0.001 mm permits fine judgement of trends and deviations, while the HOLD function secures difficult readings for documentation. Together with the friction ratchet, the measuring process becomes more reproducible: the ratchet enforces a consistent measuring force, limiting user‑induced scatter and speeding up routine measurements in the shop or at the inspection bench. Robust design and traceable calibration for production use Designed for demanding environments, the device meets IP65 ingress protection for reliable performance despite coolant mist or dust exposure. Delivered fully calibrated to ISO 17025, the micrometer includes an official calibration certificate, enabling immediate use in traceable quality management systems and easing audit preparation. The weather‑protected electronics and mechanical safeguards also reduce downtime, which supports continuous production and a predictable inspection workflow. Modular reach with practical extension options A modular extension system allows adaptation to a broad variety of bore depths: extensions: 25, 50 (2×), 100, 200, 400 mm are available to match specific component geometries. This modularity reduces inventory by enabling one base instrument to cover multiple size classes, shortening setup time and improving workshop flexibility. The extension options are straightforward to mount and lock, promoting fast changeovers between jobs without compromising measurement stability. Contact Metav Werkzeuge in Emmerich for tailored advice on the Microtech Metrology internal micrometer calibrated to ISO 17025 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 133800102 GTIN: 4061905100215 Brand: Microtech Metrology Product: Internal micrometer Facts Measuring range: 125–1,000 mm Accuracy: ±0.02 mm Display resolution: 0.001 mm Protection class: IP65 Special features Digital display with ON/ABS/SET/HOLD and mm/inch Friction ratchet for consistent measuring force Calibrated to ISO 17025 with certificate included Extension options: 25, 50 (2×), 100, 200, 400 mm Suitable for inspection and in‑process control of large bores FAQ What measuring range does the instrument cover? The internal micrometer covers a range from 125 mm up to 1,000 mm, suitable for large bores and assemblies. Is the device delivered with a calibration certificate? Yes — the instrument is supplied fully calibrated to ISO 17025 and includes the official calibration certificate for traceability. How does the friction ratchet help during measurement? The friction ratchet ensures a repeatable measuring force, reducing variability from operator pressure and improving reproducibility for batch inspections. Can readings be switched between metric and imperial units? Yes — the digital display supports mm/inch switching and features ON/ABS/SET/HOLD functions for straightforward recording. Are extension rods available to increase measuring depth? Extension rods in 25, 50 (2×), 100, 200 and 400 mm sizes are available to adapt the instrument to different bore depths. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-1000mm Internal Micrometer Digital, ISO 17025 Calibrated, IP65 - Microtech Metrology
Take advantage of the combination of a wide measuring range, robust IP65 protection and an ISO 17025 calibration certificate to secure reproducible bore measurements in production and inspection. Order the device directly via Metav Werkzeuge or ask the Metav consultants for detailed application advice. Microtech inside micrometer – Digital, IP65, 125–1000 mm A Microtech inside micrometer designed for precise internal diameter measurement across large bores and adaptable to workshop and metrology environments. Digital display, IP65 protected Measuring range 125–1000 mm Calibrated to ISO 17025 Accuracy ±0.015 mm Accurate, repeatable data for quality control The measuring system delivers traceable results thanks to the included ISO 17025 calibration certificate, making the instrument suitable for production control and incoming inspection. With a declared accuracy of ±0.015 mm and a fine display resolution of 0.0001 mm, the device provides the numerical certainty required for process capability assessments. The digital readout simplifies data capture and reduces transcription errors, supporting faster decision-making on the shop floor and in the measurement lab. Robust construction for demanding workshop conditions Built to withstand industrial use, this instrument features an IP65 rating that protects the electronics from dust and spray, extending service life in harsher environments. The construction is optimised for stable handling during deep-bore work: the measurement interface has a 22 mm diameter for secure contact and consistent seating in the bore. The solid mechanical design reduces measurement scatter and supports reproducible results even when used in production settings with frequent handling. Flexible range with extendable rods for larger bores The modular extension system allows coverage from 125 mm up to 1,000 mm without compromising stiffness. The delivery scope includes a set of extension rods (25; 50 (2); 100 (2); 200; 400 (2)) so larger internal diameters can be reached economically and accurately. This modular approach reduces the need for multiple instruments and speeds up set-up times, which benefits throughput where varying bore sizes occur in the same production run. Ready-to-use calibration and straightforward integration Supplied fully calibrated under ISO 17025, the instrument arrives ready for immediate use with a calibration certificate included in the delivery. The combination of a digital output, rugged protection class and factory calibration supports integration into quality management processes and traceability chains. Metrology teams and workshop supervisors will value the reduced lead time from receipt to production-ready status and the documented compliance for audits. Choose the Microtech inside micrometer for robust, ISO‑traceable bore measurement and contact Metav Werkzeuge in Emmerich for application-specific advice or ordering assistance Technical data Article number: 133800100 GTIN: 4061905041709 Manufacturer: Microtech Metrology Digital: yes IP rating: IP 65 Numbers / Core technical data Measuring range: 125–1000 mm Accuracy: ±0.015 mm Display resolution: 0.0001 mm Diameter: 22 mm ISO 17025: calibrated and certificate included Special features / Versions Digital readout with robust housing Extension rods included: 25; 50 (2); 100 (2); 200; 400 (2) Suitable for internal diameter and bore measurement eClass: 21170335 / ETIM: EC003590 FAQ What measurement range does this inside micrometer cover? The instrument covers a measuring range from 125 mm to 1000 mm, enabled by the supplied extension rods for larger bores. Is the device delivered calibrated for traceability? Yes, the Microtech inside micrometer is supplied fully calibrated under ISO 17025 and includes the calibration certificate with delivery. How accurate is the inside micrometer in typical use? The declared accuracy is ±0.015 mm, with a display resolution of 0.0001 mm, suitable for standard industrial inspection tasks. Can the instrument be used in a workshop environment with dust and coolant? The IP65 protection rating safeguards the digital electronics against dust ingress and low-pressure water jets, making it appropriate for challenging shop-floor conditions. Which accessories are supplied to extend the measuring range? The delivery includes extension rods in the sizes 25; 50 (2); 100 (2); 200; 400 (2), allowing the micrometer to reach up to 1000 mm. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
125-150 mm Digital Thread Micrometer Without Anvils 60° Setting, Digital Readout, Ratchet, Transport Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement, robust workshop features and secure data transfer to streamline thread inspection processes; the instrument’s 0.001 mm display and ratchet stop ensure consistent results while the integrated data output supports traceable documentation — order via Metav Werkzeuge or contact the team for tailored delivery and advice. Digital thread micrometer M302.196.D — 125–150 mm range, digital readout (Metav IndustryLine) A Digital thread micrometer engineered for precise external thread measurement in workshop and quality‑control environments, offering a 125–150 mm measuring range and an included 60° setting gauge. Digital readout, 0.001 mm resolution Measuring range 125–150 mm Non-rotating spindle with ratchet Includes 60° setting gauge and protective case Accurate thread measurement for consistent quality The instrument delivers repeatable external thread checks across medium-sized components thanks to its 125–150 mm measuring range and fine display resolution of 0.001 mm, which enables clear discrimination of small deviations during pass/fail decisions. Built-in mechanical features such as a non-rotating spindle and a ratchet stop reduce operator-induced variability: the spindle’s fixed orientation prevents thread damage and ensures that the contact geometry remains constant, while the ratchet provides a reproducible measuring force. These elements combine to make the tool suitable for in‑line quality control as well as final inspection tasks. Efficient digital handling and traceable output The digital display offers practical control with ON/OFF, ABS/INC, UNIT and SET functions for immediate unit changes and zeroing, making routine measurements faster and less error‑prone. For production environments that require documentation, the micrometer’s RB 4.1 data output enables direct transfer of numeric results to inspection software or a data logger, supporting traceability and simplified statistical process control. Clear numeric feedback and reliable digital transfer reduce post‑processing time and help integrate the instrument into lab information systems or shop‑floor records. Robust design for workshop use and safe transport Designed for industrial handling, the micrometer weighs 1.2 kg and features a 6.5 mm spindle designed to withstand workshop demands while keeping the instrument stable during measurement cycles. The delivery includes a 60° setting gauge to verify contact geometry before measurement and a protective case for safe storage and transport, ensuring the device remains calibrated and physically protected between uses. Its construction and accessory package make it a practical choice for maintenance departments, toolrooms and metrology laboratories that require a blend of precision and durability. Contact Metav Werkzeuge for a detailed specification sheet or to discuss integration of the Metav IndustryLine digital thread micrometer into inspection routines; assistance and delivery coordination are available from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: M302.196.D GTIN: 4054469115245 Category: Micrometers Measurements & performance Measuring range: 125–150 mm Resolution: 0.001 mm Accuracy: 0.012 mm Measuring spindle diameter: 6.5 mm Weight: 1.2 kg Features & materials Digital display with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Ratchet stop Non-rotating spindle Incl. 60° setting gauge Delivered in protective case FAQ What is the measuring range of this micrometer? The measuring range is 125–150 mm for the Digital thread micrometer M302.196.D, suitable for medium‑sized external thread measurements. How fine is the display resolution and what accuracy can be expected? The instrument provides a 0.001 mm resolution with an accuracy rating of 0.012 mm, giving high‑resolution readings for production and inspection tasks. Can measurement results be transferred to a PC or data system? Yes, results can be output via the RB 4.1 interface on the Metav IndustryLine digital thread micrometer for direct capture in inspection software. Does the micrometer include calibration or a setting tool? The delivery includes a 60° setting gauge to verify the contact geometry; calibration status should be requested if a certificate is required. Is the tool supplied ready for transport and workshop use? The micrometer is supplied in a protective case for safe transport and storage and features a ratchet stop and robust spindle arrangement for workshop durability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125-150 mm Micrometer Caliper Ratchet, Matt Chrome Thimble, Painted Frame, Supplied in Case - Metav IndustryLine
Combining mechanical robustness, a fine 0.01 mm graduation and a ratchet stop ensures accurate, repeatable measurements for workshop and inspection tasks; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M304.613 Outside Micrometer 125–150 mm — ratchet stop, 0.01 mm graduation The M304.613 is an outside micrometer designed for precise external diameter measurements in general workshop, toolroom and inspection environments. Outside micrometer 125–150 mm by Metav IndustryLine 0.01 mm graduation for reliable mechanical reading Ratchet stop for consistent measuring force Matt‑chromed thimble and painted frame Precise mechanical measurement for reliable quality control This outside micrometer provides a classic, engineering‑grade measuring solution where electrical power and batteries are unwanted variables. The 0.01 mm graduation on the thimble gives clear mechanical readings that suit standard workshop tolerance checks, while the ratchet stop ensures a consistent measuring force, reducing operator variance and improving repeatability. The instrument is constructed to support routine inspections and production sampling without the complexity of digital electronics. Durable design that withstands daily workshop use A painted frame with a matt‑chromed thimble combines protection and low‑glare visibility; the spindle and thimble surfaces are finished for smooth operation and long service life. The spindle pitch of 0.5 mm provides a predictable mechanical advance per thimble revolution, making fine adjustments straightforward and intuitive. These design choices reduce downtime and maintenance, so the measuring tool remains a reliable part of the quality workflow. Easy integration into inspection routines and documentation As a mechanical, analogue instrument conforming to DIN 863, the micrometer fits established inspection procedures and documentation practices in metalworking and toolmaking. The clear sleeve and thimble markings simplify visual reads, and the instrument’s range of 125–150 mm covers larger components within typical machine‑shop and assembly tasks. For traceable measurement requirements, the product’s specification and serial details support inclusion in calibration and quality records. Practical benefits for purchase and workshop logistics The mechanical construction eliminates concerns about battery life and electronic faults, offering a straightforward service life profile and predictable calibration intervals. The thimble’s matt finish reduces distracting reflections during measurement, and the ratchet mechanism promotes consistent contact pressure across repeated checks. These features together make the instrument a pragmatic choice for departments seeking dependable, low‑complexity measuring tools. Contact Metav Werkzeuge today for application guidance and to secure this Metav IndustryLine micrometer for accurate workshop control Technical Data Article number: M304.613 GTIN: 4054469117188 Brand: Metav IndustryLine Norm: DIN 863 Tariff number: 90173000 Facts Measuring range: 125–150 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Sleeve/spindle diameter: 6.5 mm Analog reading: yes Special features Ratchet stop for repeatable measuring force Frame painted, thimble matt‑chromed Category: Micrometers / Messschrauben Mechanical, non‑electronic instrument FAQ What measuring range does this micrometer cover? The M304.613 outside micrometer covers an external measuring range of 125–150 mm. How fine is the reading and how repeatable are measurements? The instrument offers a 0.01 mm graduation and a ratchet stop to promote repeatable contact pressure and consistent readings. Is the micrometer compliant with recognised standards? Yes, the device is manufactured to meet DIN 863 requirements for mechanical micrometers. What construction materials and finishes are used? The frame is painted for protection and the thimble is matt‑chromed to reduce glare and improve legibility on the M304.613 micrometer. What spindle pitch does the instrument use? The micrometer employs a 0.5 mm spindle pitch to provide precise and predictable movement per thimble revolution. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com