Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
100mm Setting Gauge For Thread Micrometer 55° For Whitworth Or Metric Inserts - Metav IndustryLine
Take advantage of the compact 100 mm length and precisely defined 55° thread geometry to achieve repeatable setting of thread micrometers; order this setting gauge via Metav Werkzeuge or consult their specialists for application advice. Setting gauge 100 mm for thread micrometer (55°) — Metav IndustryLine The setting gauge 100 mm for thread micrometer provides a compact, angle-specific reference for setting and verifying thread micrometers used with Whitworth and insert threads. Precision setting for 55° Whitworth threads Compact 100 mm gauge for thread micrometers Metav IndustryLine accessory, SKU M309.091.3 Consistent thread geometry for reliable settings The compact reference block delivers a defined 55° flank angle that matches Whitworth thread profiles, supporting reproducible adjustments of thread micrometers and related gauges. By using a dedicated angle standard rather than improvised references, measurement drift and setup time are reduced. The gauge functions as a direct mechanical comparator: once the micrometer is set to the gauge, the tool reads out a consistent reference dimension, improving throughput in inspection benches and small-series workshop testing. Compact design that simplifies routine calibration and checks At 100 mm length, the block combines accessibility and stiffness: the short span reduces flex during handling while keeping the physical footprint small in crowded inspection areas. The accessory is suited for quick verification tasks and bench use, where a straightforward mechanical standard accelerates checks without elaborate fixturing. The Metav IndustryLine designation signals compatibility with workshop workflows and warehouse distribution from Emmerich, ensuring replacement or additional units are readily available. Practical benefits for workshop and quality control Using a dedicated setting block for thread micrometers standardises setting procedures and reduces measurement variability between operators. The accessory is especially useful where multiple micrometers are in rotation: a single, angle-correct standard minimises cross-check time and helps maintain repeatability across shifts. As an accessory classified for thread micrometer applications, it integrates into existing tool cabinets and measurement routines with minimal training required. For precise thread-setting routines involving Whitworth or insert threads, request the Metav IndustryLine setting gauge via Metav Werkzeuge or ask their technical consultants for guidance at info@metav-werkzeuge.com or by phone; Metav Werkzeuge supplies the accessory and application advice from Emmerich. Technical data SKU: M309.091.3 GTIN: 4054469118130 Customs tariff number: 90173000 Facts Length: 100 mm Angle: 55° Weight: not specified in product fields Special features Angle variants noted: 60° for thread inserts or 55° for Whitworth thread inserts Accessory for thread micrometers and thread gauges Brand: Metav IndustryLine Story trigger: accessory FAQ What thread angles does the setting gauge support? The setting gauge supports a 55° flank angle for Whitworth thread inserts and is listed with the alternative 60° option for certain thread inserts as specified in the product features. Which measuring tools is this gauge intended for? This accessory is intended for thread micrometers and similar thread-setting devices; it provides a compact reference for setting and verifying those tools, and is sold as Metav IndustryLine SKU M309.091.3. Is the gauge suitable for workshop use and quick verifications? Yes, the 100 mm size and compact design make it suitable for routine bench checks and quick verification cycles in workshop quality-control procedures. How is the product referenced for ordering and stock? Order or reference the item by its SKU M309.091.3 and GTIN 4054469118130 when enquiring or placing a request. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Setting Gauge for Thread Micrometers 60°/55° Options, 0.04kg - Metav IndustryLine
Take advantage of a compact, purpose-designed setting gauge that combines a precise 60° thread profile, a practical 100 mm reference length and straightforward compatibility with Whitworth inserts. Benefit from faster, more reliable thread-micrometer setups and order directly via Metav Werkzeuge or consult the Metav team for application advice. Setting gauge 100 mm for thread micrometer — 60° profile (M309.097.3) A compact setting gauge for calibrating thread micrometers and setting thread inserts with metric 60° and Whitworth 55° profiles 100 mm reference length for thread setup 60° profile for metric thread inserts Optional 55° use for Whitworth inserts Precision accessory for thread micrometers Faster set-up and fewer measurement errors for thread inspection The compact 100 mm reference length is optimised for workshop workflows where quick, repeatable set-up matters. Serving as a tactile reference for thread micrometers, the gauge reduces the need for trial measurements and accelerates first-off checks. The clearly defined 60° profile aligns with standard metric thread geometry, ensuring that adjustments to the micrometer reflect the actual thread form rather than operator estimation. This results in measurable time savings during daily inspection and fewer rework cycles. Clear compatibility with metric and Whitworth thread systems Designed with versatility in mind, the gauge supports a standard 60° thread form while allowing use with 55° Whitworth inserts where required. The dual-profile suitability makes the instrument a pragmatic choice for mixed-production environments or toolrooms that handle both metric and imperial patterns. As a dedicated accessory to thread micrometers, the tool provides a stable reference that simplifies cross-checking, so calibration of the measuring instrument can be verified rapidly before critical measurements are taken. Practical design that supports workshop routines Although compact, the gauge is engineered to be robust enough for regular handling during routine checks. The modest dimensions and uncomplicated geometry make it easy to integrate into existing inspection jigs or to use as a handheld reference during set-up. By providing a fixed thread angle reference and a defined 100 mm datum, the accessory minimises uncertainty when transferring settings from a master to the measuring instrument, improving reproducibility across multiple operators and shifts. Contact Metav Werkzeuge for specification advice and ordering — Metav Werkzeuge GmbH in Emmerich provides product expertise and fast supply for workshop-ready measuring tools Technical details SKU: M309.097.3 GTIN: 4054469118260 ECLASS: 21170102 Core technical data Reference length: 100 mm Thread profile angle: 60° Tariff number: 90173000 Special features Compatibility with 55° Whitworth inserts Accessory for thread micrometers Intended as a setting/reference gauge FAQ What is the primary purpose of this setting gauge? The setting gauge is intended as a fixed reference for thread micrometers, enabling faster and more reliable set-up of measuring instruments and ensuring alignment to a 60° thread profile. Can the gauge be used with Whitworth threads? Yes, the gauge supports use with 55° Whitworth inserts as indicated in the product features, providing flexibility for mixed-thread work. Which measuring instruments is this accessory designed for? This accessory is designed specifically as a setting reference for thread micrometers and related thread-measuring equipment; it helps transfer a known thread angle and datum into the instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Setting Gauge Whitworth 55 Thread Adapter - Microtech Metrology
Take advantage of the 100 mm length and the dedicated Whitworth 55 thread reference to achieve consistent, repeatable thread settings in the workshop; order the setting gauge directly via Metav Werkzeuge or contact our consultants for assistance. Setting gauge (Einstellmaß) — 100 mm, Whitworth 55 by Microtech Metrology A Setting gauge designed as a compact thread reference for workshop metrology, ideal for establishing and checking Whitworth 55 thread setups in tooling and maintenance tasks 100 mm precision length for consistent setup Whitworth 55 thread reference Manufactured by Microtech Metrology Accurate thread setting that reduces rework and downtime This thread reference is engineered to provide a reliable datum for setting and verifying Whitworth 55 thread forms. The compact 100 mm length offers a balance between handling convenience and measuring stability, which helps to reduce setup time and minimise rejects during batch runs. By referencing a fixed master, processes that rely on repeatable thread engagement—tool alignment, go/no‑go checks and fixture adjustments—benefit from reproducible results. The combination of a defined reference size and a robust geometry supports faster decision‑making in both repair and production environments. Clear function and straightforward application for workshop teams The gauge fulfils the role of a straightforward workshop standard: it is a reference gauge for Whitworth 55 applications and integrates easily into existing inspection routines. For those less familiar with the Whitworth system, this standard refers to a traditional British thread form commonly encountered in older machinery and specific fastener ranges; having a dedicated reference simplifies compatibility checks. Use the gauge in routine set‑ups, toolroom verifications and maintenance checks to confirm correct thread engagement before committing components to assembly or machining operations. Built for consistent performance with trusted provenance Produced by Microtech Metrology, this accessory is intended as a durable, calibration‑friendly reference for everyday metrology tasks. The simple design minimises handling errors and keeps the focus on reproducible alignment rather than complex measurement procedures. As an accessory category item, it complements calipers, gauges and thread inspection tools, forming a compact, highly usable addition to the workshop toolkit. Choosing a branded reference from a specialist manufacturer supports traceability and process confidence in quality control workflows. For Whitworth 55 thread setups or specialist advice on integrating this Microtech Metrology setting gauge into production, contact Metav Werkzeuge — our Emmerich team can advise by email or phone and support procurement and delivery. Technical data Article number: 110720010 GTIN: 4061905460043 Facts Length: 100 mm Special features Whitworth 55 thread reference Category: Accessories (Zubehör) Brand: Microtech Metrology FAQ What is the primary use of this setting gauge? The setting gauge serves as a fixed reference for establishing and checking Whitworth 55 thread setups; it is intended for use in tooling, maintenance and workshop metrology tasks. Is the gauge suitable for production and maintenance environments? Yes, the Microtech Metrology setting gauge is designed for workshop and production support, providing a compact 100 mm reference that simplifies repeated thread checks. Does the setting gauge come with a certificate of calibration? No ISO 17025 calibration field is specified for this item; therefore the setting gauge is supplied as a functional workshop reference without an ISO 17025 certificate. Which thread standard does the gauge reference? The gauge references the Whitworth 55 form, making it suitable where classic Whitworth threads must be set or verified. How can the SKU be used to order or identify the item? Use SKU 110720010 or GTIN 4061905460043 when enquiring to ensure the correct Microtech Metrology setting gauge is supplied. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100–125 mm Dial Plunger Micrometer Ø30 mm Anvil, Painted Frame, Matte Chrome Thimble, Ratchet, Supplied in Case - Metav IndustryLine
Take advantage of reliable workshop performance with a coated frame, matt‑chrome measuring drum and a precise 100–125 mm measuring range; order the instrument directly via Metav Werkzeuge or consult our technical advisors for application guidance. Micrometer M309.254 — Disc‑anvil micrometer, 100–125 mm, Ø30 mm (Metav IndustryLine) The Micrometer M309.254 is a disc‑anvil micrometer designed for precise external measurements in machining and inspection tasks, offering a robust frame finish and a matt‑chrome measuring drum for reduced glare and lasting legibility. Measuring range 100–125 mm Accuracy 0.006 mm for fine readings Ø30 mm disc anvil with matt chrome drum Supplied with protective transport case Consistent accuracy for everyday workshop control The instrument delivers a 100–125 mm measuring range that places it in the standard class for workshop and metalworking use, balancing reach and rigidity for general production tasks. With a stated accuracy of 0.006 mm, the micrometer supports routine quality control where tight tolerances matter. The analog scale provides an able reading step of 0.01 mm, while the precision construction reduces measurement scatter; this combination enables dependable comparative checks and helps maintain process stability on the shop floor. Design choices that reduce operator influence Built with a non‑rotating measuring spindle and ratchet stop, the device enforces a repeatable measuring force so readings are less affected by operator variation. The Ø30 mm disc anvil spreads contact pressure and is paired with a matt‑chrome measuring drum to limit reflection during reading. The lacquered frame improves corrosion resistance and surface durability, supporting long service life in daily use. These features together enhance repeatability and reduce rework in serial production. Handling, storage and transport made practical Weighing approximately 1.2 kg, the micrometer remains manoeuvrable while feeling substantial enough for stable measurements. The unit is supplied in a protective transport case, easing safe storage and on‑site movement between workstations. The ratchet mechanism prevents over‑tightening, protecting specimens and the instrument itself. For workshops seeking tools that combine user‑friendly handling with rugged‑service design, this micrometer meets those needs without complex maintenance. Applications and benefits for production and inspection Ideal for component inspection, set‑up checks and general metalworking measurements, the micrometer is suited to repetitive external gauging of shafts, rings and turned parts. The robust finishing and reliable measuring drum allow quick readings under typical workshop lighting, while the construction supports routine use in jigs, fixtures and incoming inspection. Selection of this instrument contributes to shorter inspection cycles and a more consistent quality output across manufacturing steps. Contact Metav Werkzeuge for tailored advice on integrating the M309.254 into your measurement routine or to request specification support from our Emmerich team Technical data Article number: M309.254 GTIN: 4054469118734 ECLASS: 21170328 ETIM: EC003590 Tariff number: 90173000 Facts Measuring range: 100–125 mm Resolution (reading step): 0.01 mm Accuracy: 0.006 mm Weight: 1.2 kg Special features Coated frame (lacquered) Measuring drum matt chrome Ø30 mm disc anvil Non‑rotating measuring spindle Ratchet stop for repeatable force Supplied in protective transport case FAQ What measuring range does this micrometer cover? The micrometer M309.254 covers a measuring range of 100–125 mm, making it suitable for standard workshop measurements. What accuracy can be expected from the instrument? The M309.254 is specified with an accuracy of 0.006 mm, supporting fine tolerance checks in production and inspection. Is the spindle designed to reduce measurement error from rotation? Yes; the micrometer features a non‑rotating measuring spindle and a ratchet stop to ensure consistent contact and reduced operator influence. How is the instrument supplied for transport and storage? The micrometer is delivered in a protective transport case, which aids safe storage and transfer between workstations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100–125 mm Digital Micrometer 0.001 mm Resolution Ratchet, Matt Chrome Measuring Spindle, Supplied in Case - Metav IndustryLine
Take advantage of the combination of industrial-grade accuracy, a 0.001 mm digital readout and a ratchet spindle for repeatable measurements; order directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Micrometer 100–125 mm by Metav IndustryLine — 0.001 mm resolution, ratchet spindle The Digital Micrometer 100–125 mm is a workshop‑grade measuring instrument designed for precise external measurements of medium‑sized components in production and quality control. 0.001 mm resolution for sub‑micron checks Digital display with ABS/INC/UNIT keys Ratchet spindle for repeatable measuring force Delivered in protective case for safe transport High‑precision readout speeds up inspection The main advantage of this instrument is its 0.001 mm resolution, displayed on a clear digital display with ABS/INC/UNIT switching. This level of detail reduces interpretation errors compared with coarse scales and allows faster pass/fail decisions during incoming inspection or batch sampling. Compliance with DIN 863 gives a verifiable baseline for dimensional checks, so results can be compared reliably across shifts and suppliers. The integrated ratchet ensures a consistent measuring force, which is essential when short cycle times must not compromise repeatability. Robust mechanics for everyday workshop use A painted frame and a matt‑chromed measuring drum provide resistance to typical workshop wear, while the measuring faces 6.5 mm diameter offer a stable contact area for cylindrical and flat surfaces. The ratchet spindle prevents overtightening and helps maintain measurement integrity over many cycles. Supplied in a protective case, the instrument is protected in transit and storage, reducing downtime due to damage and keeping calibration intervals predictable. This construction supports routine use on the shop floor without specialised handling. Practical digital functions that reduce handling time The instrument’s control cluster (ON/OFF/SET plus ABS/INC/UNIT) simplifies mode changes and zeroing, which shortens setup time at the inspection bench. The clear numeric readout eliminates manual interpolation and lowers the risk of transcription mistakes when transferring values to inspection sheets. With a measuring range 100–125 mm, the device covers common medium‑sized parts found in machine building and assembly, offering a balance between reach and handling comfort for single‑operator checks. Contact Metav Werkzeuge for application guidance and secure the Digital Micrometer from Metav IndustryLine with its 0.001 mm resolution and ratchet spindle for reproducible workshop measurements. Technical Data Article number: M302.258 GTIN: 4054469151762 Category: Micrometers (measuring instruments) Standard: DIN 863 Facts Measuring range: 100–125 mm Resolution: 0.001 mm Measuring faces diameter: 6.5 mm Digital: yes (ON/OFF/SET + ABS/INC/UNIT) Special features Ratchet spindle for consistent measuring force Frame painted, measuring drum matt‑chromed Supplied in protective case Suitable for external measurements and workshop inspection FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 100–125 mm, suitable for medium‑sized external dimensions in production and maintenance. Is the display able to switch between absolute and incremental modes? Yes — the instrument features ABS/INC/UNIT functionality so measurements can be taken in absolute or incremental modes as required. Does the micrometer include a ratchet or friction stop? A ratchet spindle is fitted to ensure a consistent measuring force and improved repeatability across multiple measurements. What standard does the micrometer comply with? The tool is supplied to DIN 863, providing a recognised reference for dimensional inspection. Is the instrument supplied ready for use in a workshop? The micrometer arrives in a protective case and is configured with the digital functions described; any further workplace integration can be discussed with Metav Werkzeuge. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100–125 mm Digital Micrometer 0.001 mm Resolution With Friction Thimble, DIN 863 - Metav IndustryLine
Take advantage of precise external measurement with a combination of ultra‑fine resolution, reliable force control and digital data output for streamlined quality checks. Benefit from robust carbide measuring faces and the Metav IndustryLine service network — order via Metav Werkzeuge or consult our specialists for technical integration. Digital micrometer M302.078 (100–125 mm) – Friction ratchet, 0.001 mm resolution by Metav IndustryLine The Digital micrometer M302.078 is a workshop and production‑grade external measuring instrument designed for repeatable, high‑resolution checks in metalworking and precision manufacturing. 0.001 mm resolution for ultra-fine readings Friction ratchet for repeatable measuring force Carbide measuring faces (6.5 mm) for wear resistance RB 6 data output for digital logging compatibility Ultra‑fine resolution for dependable quality control With a measuring range 100–125 mm and a display resolution of 0.001 mm, this micrometer delivers measurements suitable for demanding production control and toolmaking tasks. The fine resolution reduces uncertainty when inspecting turned parts, shafts and bearing seats, converting micrometre‑scale variations into clear numerical decisions. Compliance with DIN 863 ensures the measuring procedure aligns with recognised workshop standards, supporting consistent quality documentation across batches. Repeatable measuring force and straightforward data transfer The integrated friction ratchet provides a controlled measuring torque, improving repeatability by limiting operator influence during closing. Readings are shown on a clear digital display with ON/OFF, SET, DATA and mm/inch/0 functions for quick zeroing and unit changes. The RB 6 data output enables connection to data loggers or inspection software, simplifying statistical process control and reducing transcription errors — a direct productivity gain for quality departments and inspection benches. Durable contact faces and workshop readiness Carbide contact faces with a diameter of 6.5 mm resist wear and preserve accuracy over prolonged use, lowering maintenance frequency and total cost of ownership. The instrument’s robust construction supports routine use in production environments; the specified weight reflects a solid, stable feel during measurement. Supplied under the Metav IndustryLine umbrella, this micrometer benefits from a quality‑assured distribution channel that emphasises traceable calibration and dependable aftercare. For precision measurement needs that demand sub‑micrometre resolution and reliable data output, choose the Metav IndustryLine M302.078 micrometer — contact Metav Werkzeuge in Emmerich for application advice or to arrange purchase via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M302.078 GTIN: 4054469168838 Category: Messschrauben Manufacturer: Metav IndustryLine Facts Measuring range: 100–125 mm Resolution: 0.001 mm Measuring face diameter: 6.5 mm Weight: 1.5 kg Standard: DIN 863 Special features Friction ratchet Digital display with ON/OFF/SET/DATA/mm/inch/0 functions Data output: RB 6 Carbide measuring faces Digital micrometer (external measurement) FAQ What measurement range does this micrometer cover? The micrometer covers a measuring range of 100–125 mm as specified for the Metav IndustryLine M302.078 micrometer. How fine is the resolution and what does it mean for inspection? Resolution is 0.001 mm, which allows the micrometer to detect sub‑millimetre deviations suitable for high‑precision inspection tasks and production control. Can measurement data be exported automatically? Yes, the instrument is equipped with an RB 6 data output so measurement values can be transferred to compatible data loggers or inspection software. What ensures consistent measuring force during use? The built‑in friction ratchet limits operator torque to provide a repeatable measuring force, improving consistency across repeated measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100–125 mm Digital Thread Micrometer Without Inserts 60° Setting, Data Output RB 4.1, Plastic Case - Metav IndustryLine
Take advantage of the combination of reliable digital readout, robust mechanical design and standardised data output for efficient thread inspection and traceable quality control; order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Digital thread micrometer M302.195.D — 100–125 mm, digital readout (RB 4.1) A Digital thread micrometer M302.195.D designed for precise external thread measurement in production and inspection environments, ideal for workshop and shop‑floor use. Digital display with ON/OFF, ABS/INC, UNIT, SET Measuring range 100–125 mm for medium components Non-rotating spindle and ratchet thimble Data output RB 4.1 for digital transfer Precision and repeatability that protect product quality The measuring system delivers 0.012 mm accuracy with a fine 0.001 mm resolution, making it suitable for routine verification of external threads and screw dimensions where reproducibility matters. The combination of a non-rotating spindle and a ratchet thimble reduces operator-induced variability: the spindle avoids twisting of the workpiece while the ratchet ensures a constant measuring force. These mechanical features produce reliable, repeatable results that support faster decisions in production control and reduce rework rates. Seamless digital handling for traceability and process control Equipped with a clear digital display and standardised RB 4.1 data output, this micrometer simplifies documentation and integration into existing data-collection workflows. The display offers ON/OFF, ABS/INC, UNIT and SET functions for quick switching between absolute and incremental readings and for choosing metric or inch units. The RB 4.1 interface enables direct transfer of measured values to data loggers or SPC systems, reducing transcription errors and supporting traceable measurement records for audit and quality-management processes. Practical design for everyday workshop demands With a measuring span of 100–125 mm and a substantial spindle diameter of 6.5 mm, the instrument is dimensioned for medium-sized components common in mechanical engineering and assembly. The device is delivered without thread inserts, allowing selection of the appropriate anvil geometry for specific thread profiles. A protective case is included for safe transport and storage, and the instrument’s weight of 0.94 kg reflects a balance between rigidity and handling comfort. These attributes combine to speed routine inspections while maintaining user-friendly handling on the shop floor. Choose the Metav IndustryLine digital thread micrometer for reliable, traceable thread inspection and contact Metav Werkzeuge in Emmerich for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M302.195.D GTIN: 4054469115221 ECLASS: 21170328 Customs tariff number: 90173000 Facts Measuring range: 100–125 mm Resolution: 0.001 mm Resolution (inch): 0.00005 in Accuracy: ±0.012 mm Weight: 0.94 kg Measuring spindle diameter: 6.5 mm Special features Digital display with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Ratchet thimble for reproducible measuring force Non-rotating spindle Delivered in a protective case Supplied without thread inserts FAQ Is the instrument supplied with thread inserts? The micrometer is supplied without thread inserts; thread anvils should be selected to match the specific thread profile required for measurement. What interface is available for data transfer? This model provides an RB 4.1 data output, allowing measured values to be transferred digitally to compatible data collectors or SPC systems for traceability. For which applications is the 100–125 mm range best suited? The 100–125 mm span covers medium-sized external threads and components often found in mechanical assemblies, fixtures and production parts requiring standardised inspection. How is consistent measuring force ensured during use? A ratchet thimble is integrated to deliver a constant measuring force, while the non-rotating spindle minimises twist and wear, improving repeatability for threaded parts measured with this instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100–125 mm Universal Micrometer 0.01 mm Resolution, Movable Anvil, 7 Insert Pairs, Case - Metav IndustryLine
Benefit from reliable, workshop-grade measurement thanks to the combination of a 100–125 mm measuring range, fine 0.01 mm graduation and a ratchet spindle with rotating mandrel for reproducible contact force; order the micrometer via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Metav IndustryLine Universal Micrometer M309.174 — 100–125 mm, 0.01 mm resolution The Metav IndustryLine Universal Micrometer is a workshop and inspection instrument for precise external measurement of components in the 100–125 mm range, featuring a movable anvil and seven interchangeable measurement inserts. 0.01 mm resolution for fine measurements Movable anvil for flexible measuring tasks Ratchet spindle and rotating mandrel for repeatability Supplied with seven interchangeable inserts Precise measurement across the standard workshop range This instrument sits firmly in the Standard range for measuring tools, covering 100–125 mm and combining a fine 0.01 mm graduation with an analogue readout. The fine graduation enables clear incremental reading for typical machine‑shop inspections and quality checks; when paired with careful handling, it supports consistent dimension control across production runs. The configuration with a movable anvil extends measurement options for non‑standard surfaces, while the included set of seven inserts allows adaptation to a variety of workpiece geometries without adding complexity. Robust mechanics for repeatable results Mechanical design elements contribute directly to process reliability: the matt‑chrome measuring drum and a rotating spindle with a ratchet mechanism ensure uniform contact and reduce operator‑dependent variance. The ratchet delivers a controlled final torque for each measurement, promoting repeatable results across multiple cycles. At 1.6 kg the instrument has a reassuring mass that helps stability during measurement, while the solid spindle construction (6.5 mm) supports longevity under regular workshop use. Ready for inspection tasks and straightforward integration Delivered to factory standard (Werksnorm), the micrometer is supplied with seven interchangeable measurement inserts for quick adaptation between tasks and to protect the primary measuring faces. The analogue format simplifies immediate use at the bench without software integration, making it suitable for inspection stations and mobile quality checks. For procurement or inventory, the item is identifiable by GTIN and internal article code, allowing straightforward cataloguing in toolrooms and inspection logs. For assured precision and a practical inspection solution, contact Metav Werkzeuge to arrange supply of the Metav IndustryLine Universal Micrometer M309.174 or to request application advice by phone or email. Technical data Article number: M309.174 GTIN: 4054469118543 EClass: 21170328 Tariff number: 90173000 Brand: Metav IndustryLine Specifications Measuring range: 100–125 mm Resolution / graduation: 0.01 mm Spindle diameter: 6.5 mm Weight: 1.6 kg Readout type: analogue Special features Movable anvil Ratchet spindle for constant measuring force Rotating spindle / mandrel Seven interchangeable measurement inserts Measuring drum, matt chrome‑plated Supplied to factory standard (Werksnorm) Analogue instrument suitable for workshop inspection FAQ What measuring range does this micrometer cover? The Metav IndustryLine Universal Micrometer covers a measuring range of 100–125 mm, suitable for standard machine‑shop components. What resolution and repeatability can be expected? The instrument has a 0.01 mm graduation; combined with the ratchet spindle and rotating mandrel, the Metav IndustryLine micrometer provides consistent contact force to support reproducible measurements. Are interchangeable inserts included? Yes, the micrometer is supplied with seven interchangeable measurement inserts, enabling adaptation to different part geometries without modifying the main faces. Is the micrometer calibrated to an external standard? The tool is supplied to factory standard (Werksnorm). For details about calibration certificates or specific calibration regimes, Metav Werkzeuge can advise on available services. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100–125mm Micrometer Screw Gauge With Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a 0.005 mm accuracy, an integrated microcomputer for thread measurement and Wireless+USB data output for fast documentation; the instrument is supplied with a set of anvils and an ISO 17025 calibration certificate. Order this precision micrometer directly through Metav Werkzeuge or consult our technical advisors for application advice. Micrometer "Metrisch 60" by Microtech Metrology — digital micrometer with touchscreen and wireless data output The micrometer "Metrisch 60" is a metric digital micrometer equipped with an integrated microcomputer and a colour 2.4" touchscreen, designed for reliable and efficient measurement of threaded parts in workshop and production environments. Digital 2.4" colour touchscreen display Wireless and USB data output for traceable results ISO 17025 calibrated with certificate included Precise thread measurement that speeds quality control The instrument delivers a measurement accuracy of 0.005 mm, which places it in the high‑precision class for handheld micrometres. The fixed, non-rotating spindle prevents the workpiece from turning during measurement, reducing error when assessing thread peaks or root diameters. This stability, combined with the digital readout, shortens cycle times in incoming inspection and process control. The integrated microcomputer interprets results immediately and supports consistent decision-making on the shop floor, where reproducible values are essential for downstream processes. Seamless data capture to reduce transcription errors Equipped with Wireless connectivity and USB output, the device allows direct transfer of measured values into SPC systems or inspection logs. The colour 2.4" touchscreen improves visibility in variable lighting and simplifies menu navigation, making data entry faster and less error-prone. For production environments that require documented traceability, the direct digital output replaces manual note-taking and accelerates reporting — a clear efficiency gain for quality teams aiming to cut administrative time while maintaining auditability. Calibrated traceability for certified measurement tasks This micrometer is delivered fully calibrated to ISO 17025 standards and includes the corresponding calibration certificate. The documented calibration ensures that measurements are traceable and accepted in regulated quality systems. For suppliers and subcontractors supplying parts to standards-driven industries, the included certificate removes ambiguity during audits and supports consistent measurement procedures across multiple workstations. Practical design and included accessories for workshop use The tool comes with a set of six anvils (0.4–7 mm), providing flexibility for a range of thread profiles without immediate additional tooling. Its metric configuration and the measuring range of 100–125 mm make it suitable for medium‑range components common in mechanical engineering and assembly. The digital format, compact touchscreen and wireless data transfer combine to deliver an easy-to-integrate measuring device that supports daily workshop routines and reduces friction between measurement and data handling. Contact Metav Werkzeuge for tailored advice on integrating the Microtech Metrology micrometer into production lines or to request the ISO 17025 calibration documentation from Metav Werkzeuge's specialists in Emmerich Technical data Article number: 110711258 GTIN: 4061905456923 Manufacturer: Microtech Metrology Data Measuring range: 100–125 mm Display: Colour 2.4" touchscreen Accuracy: 0.005 mm Data output: Wireless, USB Type: Metrisch 60 Special features Digital micrometer with integrated microcomputer Non-rotating spindle for reliable thread measurement Included accessories: 6 × anvils 0.4–7 mm Delivered calibrated to ISO 17025 with certificate Metric configuration for workshop and production use FAQ Is the micrometer delivered with calibration documentation? Yes. The micrometer is supplied fully calibrated to ISO 17025 and includes the calibration certificate with the delivery. Can measurement data be exported directly to inspection software? The micrometer supports Wireless and USB data output, enabling direct transfer of values to SPC systems or digital inspection logs. What benefits does the non-rotating spindle provide? A non-rotating spindle prevents workpiece rotation during contact and improves repeatability when measuring threads; the micrometer's fixed spindle is designed for this purpose. Which measuring range does this instrument cover and what class does it fit? The instrument covers 100–125 mm, placing it in the standard workshop range that balances reach and stiffness for general machine‑shop and assembly tasks. Are anvils included for different thread sizes? Yes. The scope of delivery includes six anvils (0.4–7 mm), which allow adaptation to a variety of threaded profiles without immediate additional tooling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100–125mm Micrometer With 35mm Anvil Faces, Touchscreen Display, Wireless + USB, Calibrated To ISO 17025 - Microtech Metrology
Combining ISO 17025 traceability, a clear 1.54" touchscreen and Wireless + USB data output, this digital outside micrometer delivers reliable, exportable measurements for inspection and production. Benefit from a calibrated instrument with certificate and seamless integration into data workflows — order directly via Metav Werkzeuge or request advice from our consultants for process integration. Micrometer — digital outside micrometer, 100–125 mm range, 1.54" touchscreen (Microtech Metrology) The micrometer is a digital outside micrometer designed for precision measurement of components between 100 and 125 mm, suited to inspection benches and workshop quality control. ISO 17025 calibration and certificate included Wireless and USB data output for traceability 1.54" touchscreen for clear numeric readout Ø35 mm disc measuring faces for stable contact Traceable accuracy for demanding inspections The instrument is delivered with ISO 17025 calibration and an accompanying certificate, providing documented traceability suitable for audit trails and quality management systems. With a specified accuracy of ±0.007 mm, the device sits above common shop-floor mechanical standards and provides measurable improvement for routine inspection tasks. This level of precision reduces rework and supports reliable pass/fail decisions where tolerances are tight, while the supplied calibration certificate simplifies conformity documentation for internal and external audits. Fast data capture and smooth workflow integration Equipped with Wireless and USB data outputs and a responsive 1.54" touchscreen, the micrometer enables rapid transfer of measurement results into inspection software or spreadsheets. The digital display reduces transcription errors compared with analogue readings, and wireless connectivity supports batch logging or automated data collection on the shop floor. These features shorten data‑handling time, help build traceable measurement records and make the instrument compatible with modern measurement workflows and Industry 4.0 data strategies. Stable contact geometry for repeatable results The large Ø35 mm disc measuring faces and a non-rotating spindle provide a secure contact surface that spreads pressure and reduces local deformation on the workpiece. This geometry improves repeatability for external diameters and stepped features, especially on medium-sized components. Classified within the standard measuring range category (100–300 mm), the instrument balances reach and stiffness, offering good one‑hand handling while retaining the rigidity needed for reproducible measurements on machine parts and assemblies. Ready for immediate use in production and inspection This digital instrument arrives calibrated to ISO 17025 standards, meaning it is ready for use in both laboratory and controlled production environments without further initial calibration. The combination of a crisp touchscreen readout, digital outputs and a factory calibration certificate makes the micrometer a practical choice for inspection benches, incoming goods control or process validation. Its digital nature reduces interpretation effort and helps maintain consistent measurement routines across teams. Discuss the Microtech digital micrometer and calibration package with Metav Werkzeuge to ensure optimal integration into your inspection workflow and procurement plan Technical data Article number: 110781257 GTIN: 4061905457470 Brand: Microtech Metrology Digital display: Touchscreen 1.54" Data output: Wireless + USB Facts Measuring range: 100–125 mm Accuracy: ±0.007 mm Measuring faces diameter: Ø35 mm Special features Digital instrument with touchscreen readout Wireless and USB interfaces for data capture Non-rotating spindle for reduced surface marking Delivered calibrated to ISO 17025 with certificate FAQ How precise is the micrometer and is calibration included? The micrometer offers an accuracy of ±0.007 mm and is supplied fully calibrated to ISO 17025, including the calibration certificate for traceability (Microtech Metrology, SKU 110781257). What measurement range does this instrument cover and how is it classified? The device measures from 100–125 mm and is classified within the standard range for workshop and machine‑shop inspection, offering a good balance of reach and stiffness for medium-sized components. How are measurement results transferred to inspection software? Measurement values can be exported via Wireless or USB connections from the digital instrument; the 1.54" touchscreen simplifies on‑device review before export. Will the spindle damage delicate surfaces during measurement? The micrometer uses Ø35 mm disc measuring faces and a non-rotating spindle, which spreads contact force and reduces the risk of marking sensitive surfaces while improving repeatability. Is the instrument ready for laboratory use on delivery? Yes — the micrometer is delivered calibrated to ISO 17025 standards with a certificate, making it suitable for laboratory or audited inspection processes immediately on receipt. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100–125mm Precision Micrometer Wireless/USB Color 2.4" Touchscreen, Non-Rotating Spindle, ISO 17025 Calibration - Microtech Metrology
Take advantage of certified measurement reliability and seamless data capture: the instrument combines ISO 17025 traceable certification with ±0.005 mm accuracy and flexible Wireless + USB output for efficient inspection cycles. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Micrometer 100–125 mm – Digital measuring micrometer with 2.4" colour touchscreen (Microtech Metrology) The Micrometer 100–125 mm is a precision digital measuring instrument designed for workshop inspection and quality control tasks, offering wireless and USB data transfer for fast process integration. ISO 17025 calibrated certificate included High accuracy ±0.005 mm Wireless + USB data output 2.4" colour touchscreen display Reduce rejects with traceable, shop-floor precision This digital micrometer delivers ±0.005 mm repeatability that supports tighter tolerance control and reduces rework. The instrument is supplied with an ISO 17025 calibration certificate, ensuring traceability for internal audits and external quality checks. The robust measurement performance is particularly useful where reproducible results are required across shifts, helping maintain consistent production throughput and lowering scrap rates. Integrate measurement data without extra steps Equipped with Wireless + USB data output and a clear 2.4" touchscreen, the device simplifies logging and documentation. Wireless transmission speeds up data capture at the bench, while USB provides a dependable wired option for secure transfers into inspection software or SPC systems. Together these features enable faster batch acceptance and make it easier to maintain digital records, supporting a more efficient quality workflow. Designed for reliable handling and practical use A non-rotating spindle reduces user-induced variation during clamping, improving measurement stability for difficult surfaces. The measuring range 100–125 mm covers typical mid-range inspection tasks while keeping the unit compact enough for frequent bench use. Note that the anvil with ball is not included; this omission allows custom anvil options to be fitted for specific gear or shaft profiles without unnecessary accessories. Contact Metav Werkzeuge today for a tailored recommendation or to request a delivery schedule for the Microtech Metrology micrometer with ISO 17025 calibration and Wireless + USB data output Technical Data Article number: 110741258 GTIN: 4061905457135 Manufacturer: Microtech Metrology Display: Colour 2.4" touchscreen Data output: Wireless + USB Facts Measuring range: 100–125 mm Accuracy: ±0.005 mm Calibration: ISO 17025 certificate included Digital instrument Special features Non-rotating spindle Anvil with ball not included Digital readout FAQ What level of accuracy does this micrometer offer? The micrometer 100–125 mm (Microtech Metrology, SKU 110741258) provides an accuracy of ±0.005 mm, suitable for precision workshop inspection and quality control. Is a calibration certificate supplied with the instrument? Yes. The micrometer is delivered fully calibrated with an ISO 17025 calibration certificate, allowing immediate use in traceable measurement routines. How can measurement data be exported from the device? Measurement data can be transmitted wirelessly or via USB thanks to the integrated Wireless + USB data output, enabling connection to SPC systems and inspection software. Is the anvil with ball included for gear measurements? No. The anvil with ball is not included, which enables selection of a dedicated anvil geometry suited to specific gear or shaft profiles. What advantages does the non-rotating spindle provide? The non-rotating spindle reduces measurement variation caused by operator-induced spindle rotation during clamping, improving stability and repeatability on delicate or finished surfaces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100–125mm Thread Micrometer With Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
The combination of ISO 17025 traceable calibration, 5 µm measurement accuracy and a Wireless + USB data interface ensures reliable thread inspection and fast integration into quality workflows; the instrument is delivered with a calibration certificate and a set of ten Whitworth anvils. Order the digital thread micrometer directly via Metav Werkzeuge or ask our consultants if needed. Digital Thread Micrometer — Whitworth 55, 100–125 mm, Microtech The digital thread micrometer is a precision instrument for measuring Whitworth threads and diameters in inspection rooms and workshop environments, combining a high‑resolution touchscreen with wireless data transfer for efficient documentation. ISO 17025 calibrated and certified High accuracy: 0.005 mm (5 µm) Wireless + USB data output 2.4" colour touchscreen display Accurate results for repeatable quality control Engineered for precision, the instrument provides a measurement accuracy of 0.005 mm (5 µm) together with a display resolution of 0.0001 mm, delivering reproducible results across repeated checks. The non‑rotating spindle reduces axial runout during measurement, so readings remain consistent even on delicate Whitworth threads. These characteristics make the device particularly suited to standard workshop inspection tasks within the 100–125 mm measurement range, where a balance of reach and rigidity is required for everyday quality assurance. Modern data flow reduces transcription errors Equipped with a 2.4" colour touchscreen, the device simplifies read‑out and on‑site configuration; readable digits and a responsive interface speed up routine inspections. Data transfer is handled via Wireless + USB, enabling direct logging into inspection software or statistical process control systems and cutting manual entry time. The combination of digital output and tactile display supports efficient traceability and immediate documentation, which is essential for production environments that favour precise digital recordkeeping. Traceable calibration and ready‑to‑use accessories Delivered fully calibrated to ISO 17025, the micrometer comes with a calibration certificate for audit‑ready traceability and confidence in acceptance testing. A set of ten interchangeable anvils (60–3.5 TPI) for Whitworth 55 thread profiles is included, allowing immediate conversion between common TPI sizes without additional tooling. This ready‑to‑use package reduces setup time in inspection labs and supports consistent measurement practice from first use. For tailored measurement advice or to request the ISO 17025 certificate and accessory list for this Microtech digital thread micrometer, contact Metav Werkzeuge by email or phone Technical data SKU: 110721258 GTIN: 4061905457302 Brand: Microtech Metrology Type: Whitworth 55 thread micrometer Digital: Yes Display: 2.4" colour touchscreen Data output: Wireless + USB Core specifications Measurement range: 100–125 mm Accuracy: ±0.005 mm (5 µm) Resolution (display): 0.0001 mm Calibration: ISO 17025 certificate included Features & accessories Non‑rotating spindle for reduced runout Ten interchangeable anvils 60–3.5 TPI (Whitworth 55) Wireless + USB connectivity Delivered with calibration certificate Suitable for workshop and inspection use FAQ How precise is the instrument for routine inspections? The digital thread micrometer achieves an accuracy of ±0.005 mm and a display resolution down to 0.0001 mm, providing the precision expected for standard workshop quality control. Can this micrometer measure Whitworth threads directly? Yes, the instrument is designed for Whitworth 55 profiles and is supplied with ten interchangeable anvils covering 60–3.5 TPI for direct thread and pitch diameter checks. What options are available for data capture? Measurements can be exported via Wireless or USB, allowing straightforward integration of results from the micrometer into inspection software or production databases. Does the spindle rotate during measurement? No, the spindle is non‑rotating, which minimises runout and ensures more reliable readings on threaded components. Is the device supplied with a calibration certificate? Yes, the micrometer is delivered fully calibrated to ISO 17025 standards and includes the relevant calibration certificate; SKU 110721258 is recorded for traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100–150mm Micrometer Caliper Digital Wireless USB, ISO 17025 Calibrated, Ø8mm Measuring Faces, 62mm Depth - Microtech Metrology
Combine 0.004 mm accuracy, Wireless + USB data transfer and an ISO 17025 calibration certificate for reliable, traceable measurement results; order the outside micrometer directly via Metav Werkzeuge or ask our consultants if needed. Outside micrometer (digital) by Microtech Metrology — 100–150 mm, Wireless + USB Outside micrometer for precise external dimension measurement in production and quality inspection, combining a high-resolution digital system with flexible data interfaces for seamless documentation. Digital display with 0.004 mm accuracy Wireless and USB data output 100–150 mm measuring range Engineered accuracy for repeatable results This digital instrument delivers a 0.004 mm accuracy that closes the gap between routine shop measurement and formal inspection. The instrument’s 0.0001 mm display increment supports fine setting and read-back, while the stated accuracy defines the realistic tolerance to expect in application. For machining shops and incoming inspection, this level of precision reduces rework and ensures parts meet dimensional criteria first time. The rigid frame geometry and compact Ø8 mm measuring faces maintain stable contact conditions, turning the metrological specification into repeatable operational benefits. Fast data capture and Industry 4.0 readiness Equipped with Wireless and USB outputs, the micrometer integrates directly into measurement stations and data-collection routines, removing manual transcription and accelerating quality reporting. The wired connection ensures reliable bulk data transfer, while the wireless option simplifies mobile inspections and fixture checks. These interfaces make the device suitable for digital quality workflows and statistical process control, where timely and accurate data are primary drivers of efficiency and traceability. Robust contact geometry and traceable calibration A measuring depth of 62 mm and hardened contact faces provide dependable access to a wide range of external geometries, from shafts to stepped features. The instrument is supplied fully calibrated: an ISO 17025 calibration certificate is included, guaranteeing traceability to national standards and simplifying audit preparation. This documented calibration supports regulatory compliance and provides confidence when measurements form the basis for acceptance or corrective action. Choose Microtech Metrology’s calibrated outside micrometer for consistent, documented measurements and contact Metav Werkzeuge in Emmerich for delivery and expert advice via info@metav-werkzeuge.com or by phone Technical data Article number: 115051507 GTIN: 4061905041334 Manufacturer: Microtech Metrology Digital: yes Data output: Wireless + USB ISO 17025: yes Core specifications Measuring range: 100–150 mm Accuracy: 0.004 mm Resolution (reading): 0.0001 mm Measuring depth: 62 mm Measuring face diameter: Ø8 mm Special features ISO 17025 calibration certificate included Wireless and USB interfaces for data capture Category: Micrometers Suitable for workshop and inspection use FAQ Is the micrometer delivered calibrated? Yes. The outside micrometer from Microtech Metrology is supplied with an ISO 17025 calibration certificate, providing traceability and documented measurement uncertainty for audits. Which interfaces are available for data collection? The instrument supports both Wireless and USB data output; this enables direct capture into data-loggers, SPC software or manual recording systems when using the USB connection. What level of accuracy and resolution can be expected? Declared accuracy is 0.004 mm, with a display resolution of 0.0001 mm, making the device suitable for high-precision workshop checks and many laboratory tasks. For which applications is this micrometer suited? The micrometer is intended for external measurements across the 100–150 mm range, ideal for machined parts, shafts and stepped components where traceable dimensional control is required. What does the 62 mm measuring depth mean for practical use? A 62 mm frame depth provides access to recessed features and ensures the instrument can reach a variety of part geometries while keeping the contact faces stable during measurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100–200mm Set Caliper Micrometer With Setting Gauge, Blue Powder Coated, Ratchet, Chrome Drum - Metav IndustryLine
Take advantage of a robust set that combines workshop‑grade durability, repeatable measuring force and compliance with DIN 863 for reliable production checks; the ratchet stop and hardened measuring faces ensure consistent results across the 100–200 mm range, and the set is supplied with setting standards and a transport case for safe storage—order the set directly via Metav Werkzeuge or consult our specialists for application advice. M304.421 Micrometre Set (Analogue outside micrometres, 100–200 mm) — Metav IndustryLine The M304.421 is a four-piece analogue outside micrometre set intended for workshop inspection and routine dimensional control, covering the 100–200 mm range with included setting standards for quick verification. Four-piece analogue micrometre set Range 100–200 mm with setting standards Ratchet stop for uniform measuring force Blue powder-coated frame with matt-chrome drum Repeatable precision for everyday quality control This micrometre set is designed around repeatability and straightforward measurement practice. With a reading resolution of 0.01 mm and conformity to DIN 863, the instruments provide a dependable baseline for routine checks and production sampling. The analogue spindle with a 0.5 mm pitch gives tactile control and clear graduations, so measurements can be taken reliably even in busy workshop environments. The hardened measuring faces and ratchet mechanism help reduce operator variability, which translates into fewer reworks and more consistent part acceptance rates. Built for robust handling and fast verification Ergonomic features reduce handling time and the risk of damage: the frames are blue powder-coated for abrasion resistance while the measuring drums are matt‑chrome plated for glare‑reduced reading. The set contains setting standards at 100/125/150/175 mm, enabling quick in‑house verification of zero and span without external gauges. The ratchet stop ensures a constant contact pressure across all measurements, preventing over‑tightening and protecting threads while delivering reproducible results. Supplied as a complete set, the instruments balance reach and stiffness ideally for standard workshop tasks. Practical delivery and standards backing Delivered in a dedicated transport case, the set is organised for safe storage and straightforward deployment across job sites or inspection benches. Constructed to withstand daily workshop use, the instruments meet the expectations of toolroom and maintenance teams who require robust, serviceable measuring equipment. Backed by Metav’s approach to accessible precision—supplying extensive product ranges from a central quality hub—this set supports efficient inventory consolidation and dependable restocking for production lines and maintenance departments. Choose the Metav IndustryLine M304.421 for dependable, workshop‑ready measurement—contact Metav Werkzeuge for tailored advice or to request the set via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M304.421 GTIN: 4054469117003 Manufacturer: Metav IndustryLine SKU: M304.421 Facts Measuring range: 100–200 mm Measuring range min: 100 mm Measuring range max: 200 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Number of pieces per set: 4 Weight (set): 4 kg Standard: DIN 863 Special features Analogue outside micrometres, set of 4 Ratchet stop for constant measuring force Hardened measuring faces Blue powder-coated frame Matt-chrome measuring drum Includes setting standards 100/125/150/175 mm Supplied in a transport case Mechanical (nonius style) reading FAQ What accuracy and resolution can be expected from this set? The M304.421 micrometre set (Metav IndustryLine, SKU M304.421) provides a resolution of 0.01 mm and is manufactured to the requirements of DIN 863, making it suitable for standard workshop accuracy and routine inspection tasks. Which items are included with the set for verification? The M304.421 set includes four analogue outside micrometres and setting standards at 100/125/150/175 mm, allowing rapid in‑house verification of zero and span without additional reference blocks. Are the measuring faces durable for repeated use? Yes—the M304.421 micrometres feature hardened measuring faces and a matt‑chrome measuring drum, engineered to withstand regular workshop contact and to preserve surface quality over time. How does the ratchet stop improve measurement consistency? The integrated ratchet stop on each instrument in the M304.421 set ensures a uniform contact pressure on the workpiece, reducing operator‑induced variability and increasing the reproducibility of successive measurements. Is the set suitable for carrying between job locations? The M304.421 micrometre set is supplied in a protective transport case and features a powder‑coated frame, providing practical protection and ease of handling for shop‑floor transfers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
101.6 mm Extension for Three-Point IMS 6–8 / 8–10 / 10–12 mm, Ø5.8 mm - Metav IndustryLine
Take advantage of a compact, precision‑oriented accessory that extends measurement reach while maintaining a secure M5 thread connection and a consistent Ø 5.8 mm fit; the 101.6 mm length offers reliable access in confined bores. Order the extension directly via Metav Werkzeuge or consult our specialists for matching measuring setups. Extension for three‑point IMS M312.330 — 101.6 mm length, Ø 5.8 mm (Metav IndustryLine) The Extension for three‑point IMS M312.330 is an accessory designed to extend the reach of three‑point internal measuring assemblies for small bore measurements across multiple jaw sizes Extension for three‑point IMS systems Length 101.6 mm for extended reach Ø 5.8 mm with M5 thread connection Compatible with 6–8 / 8–10 / 10–12 mm jaws Extend reach without compromising measurement reliability This compact extension delivers a straightforward way to measure deeper or harder‑to‑access internal features without altering the original measuring head. With a 101.6 mm length and a snug Ø 5.8 mm body, the accessory maintains radial stability while allowing the existing three‑point measuring assembly to work within its intended range. The preserved geometry reduces the risk of misalignment and keeps the effective contact points consistent, which benefits repeatability in routine inspection tasks. Designed for precise integration with three‑point measuring setups Connection via the M5 thread ensures a secure and repeatable mount to the measuring head; the mechanical interface is dimensioned for minimal play so that the probe centreline remains stable during insertion and retraction. The extension is compatible with three jaw assemblies sized 6–8, 8–10 and 10–12 mm, enabling a single accessory to support several common internal measuring ranges. This reduces downtime for tool changes and simplifies inventory management in metrology departments. Practical handling and application in workshop environments Fitting and removal are deliberately straightforward: the threaded attachment provides a firm coupling without special tools, making the part suitable for frequent use in production and quality‑control contexts. The modest mass keeps the added inertia low, so dynamic measuring procedures or manual probing are less likely to introduce error through increased operator influence. The extension is therefore a pragmatic choice for technicians seeking extended reach with familiar handling characteristics. Why this accessory makes sense for precision workflows Integrating this extension into existing three‑point assemblies supports leaner tool sets by adapting one measuring head for multiple bore depths. The combination of defined connection geometry and standardised sizes improves process consistency across shifts and operators. As a Metav IndustryLine accessory, the component aligns with the company’s emphasis on reliable, workshop‑ready measuring solutions aimed at reducing supplier complexity and ensuring steady availability. Contact Metav Werkzeuge for tailored advice on integrating the M312.330 extension into existing measuring rigs and to confirm compatibility with specific three‑point heads — info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: M312.330 GTIN: 4054469178509 Weight: 0.1 kg Thread: M5 Length: 101.6 mm Diameter: 5.8 mm Tariff code: 90173000 Facts Compatible jaw ranges: 6–8 mm, 8–10 mm, 10–12 mm Category: Measuring instruments › Accessories Story trigger: Accessory eClass: 21170613 ETIM: EC002219 Special features Extension for three‑point internal measuring systems Secure threaded connection for repeatable mounting Compact design for confined bore access Manufacturer brand: Metav IndustryLine FAQ Is this extension suitable for all three‑point IMS heads? Compatibility depends on the thread and jaw range; the extension is designed for three‑point assemblies with matching M5 mounting and for jaw sizes 6–8, 8–10 and 10–12 mm as specified for the M312.330 accessory. Will using the extension affect measurement accuracy? When correctly mounted, the M312.330 maintains the mechanical geometry of the measuring head; because the connection is threaded and dimensioned for minimal play, measurement repeatability is preserved for standard inspection tasks. How is the extension attached and removed? Attachment is via an M5 thread for a secure, repeatable fit; the design allows tool‑free hand mounting in most workshop routines, reducing changeover time between measurements. Can the same extension be used across multiple bore depths? Yes. The accessory was conceived to adapt a single three‑point measuring head to deeper or recessed bores, covering the listed jaw ranges without requiring different heads for each depth. Is spare stock and rapid delivery available from Metav? Metav IndustryLine maintains a broad supply network from Emmerich; contact Metav Werkzeuge to confirm current availability and lead times for the M312.330 extension. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1050mm Setting Gauge for Micrometers With Thermal Shielding, Ball Measuring Faces ±0.012mm - Metav IndustryLine
Combining a 1,050 mm nominal length with thermal protection and ball-ended measuring faces, this setting gauge delivers repeatable micrometer set-ups for larger components while maintaining an accuracy of 0.012 mm. The long, stable datum reduces setup time and improves process reproducibility. Order the setting gauge directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Setting gauge for micrometers M304.322.1 — 1050 mm, thermal protection Setting gauge for micrometers M304.322.1 is a long-range reference tool for setting external micrometers on larger assemblies, jigs and fixtures 1,050 mm long reference for micrometers Built-in thermal protection Ball-ended measuring faces for gentle contact Accuracy 0.012 mm for reliable setups Reliable long-range setup for larger workpieces The setting gauge for micrometers M304.322.1 provides a nominal length of 1050 mm and a declared accuracy of 0.012 mm, making it suitable where short references are insufficient. Classified in the Long range, the device supports the setting of external micrometers used on extended shafts, housings and fixture components. A single long datum reduces handling and alignment steps compared with chaining multiple short standards, which shortens set-up time and raises throughput without compromising repeatability. Consistent measurement conditions through thermal shielding Measurement drift caused by thermal transfer is mitigated by the integrated thermal protection, which decreases heat uptake from hands and surroundings during handling. Combined with ball-ended measuring faces, which provide a defined point contact and reduce local surface deformation, the gauge delivers more reproducible contact conditions. These practical design choices help ensure that the specified accuracy 0.012 mm is reflected in everyday workshop results rather than only under ideal laboratory circumstances. Easy integration into workshop workflows and procurement As a dedicated accessory for metrology benches and setting stations, the gauge simplifies micrometer adjustment for production, inspection and maintenance tasks. Its role is to provide a stable datum for external micrometers, thereby reducing rework and improving first-pass yields in small-series and batch production. The product is listed under order code M304.322.1 for streamlined procurement and inventory handling and fits readily into standard quality-control routines. Contact Metav Werkzeuge for specialist advice and to order the Metav IndustryLine setting gauge M304.322.1 — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M304.322.1 GTIN: 4054469116853 Zolltarifnummer: 90173000 ECLASS: 21170102 Brand: Metav IndustryLine Numbers / Core technical data Nominal length: 1050 mm Accuracy: 0.012 mm Measurement category: Long range (1,000–2,000 mm) Special features Thermal protection Ball-ended measuring faces Application: Setting external micrometers Category: Metrology accessory FAQ What is the nominal length and intended use of this gauge? The gauge offers a nominal length of 1050 mm and is intended as a long-range reference for setting external micrometers on shafts, housings and fixtures. How precise is the reference and what repeatability can be expected? The device is specified with an accuracy of 0.012 mm; the combination of thermal protection and ball-ended faces improves repeatability in workshop conditions. Can the gauge be used for calibration or only for setting tools? The gauge is supplied as a stable setting standard for micrometers and is intended primarily for setting and routine checks rather than as a primary calibration artefact. What benefit does the thermal protection provide in practice? Thermal protection reduces heat transfer from hands and the environment, limiting dimensional change during handling and so helping to maintain consistent contact conditions. How is the product identified for procurement and stock management? The product is listed under order code M304.322.1 and GTIN 4054469116853 for straightforward procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Three-Point Internal Micrometer, Calibrated, Supplied in Case With Setting Ring And Extension - Metav IndustryLine
Benefit from precise, repeatable internal measurements with a robust three‑point contact system, 0.005 mm vernier accuracy and a ready‑to‑use accessory kit including a setting ring and extension; order the instrument directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Three‑point inside micrometer M312.163.P — 0.005 mm accuracy, for blind‑hole measurement The Three‑point inside micrometer is an analogue precision instrument for reliable internal measurement of blind bores and recesses in workshop and inspection environments. 0.005 mm vernier resolution Three‑point internal contact for blind bores Includes setting ring and extension Precision that reduces rework and inspection time The instrument’s three‑point geometry centres reliably in bores that have no through‑hole, ensuring consistent contact and minimising measurement variation. With a rated accuracy of 0.005 mm and an analogue vernier readout matched to that resolution, the tool is engineered for repeatable results in quality control and production checks. This combination of geometry and fine graduation shortens decision cycles and reduces the need for corrective machining. Robust design and practical delivery for the shop floor A matt chrome‑plated scale and vernier provide clear, low‑glare readings and durable marking, while hardened measuring faces ensure long service life under frequent use. The delivery scope includes a setting ring and a dedicated extension, enabling calibration and reach for deeper bores straight from the box. The instrument is supplied in a protective transport case to ease handling and reduce damage in transit, and its solid frame contributes to stability during measurement. Direct benefits for production and inspection workflows This analogue inside micrometer suits machine shops, toolrooms and inspection benches where blind‑hole measurement is routine: the three‑point contact and fine resolution improve confidence in pass/fail decisions and support consistent assembly tolerances. Backed by Metav IndustryLine distribution and stock in Emmerich, the unit integrates into existing measuring routines with minimal training; for more detailed application guidance, Metav’s technical team can provide product‑specific advice. For precision internal measurement tasks, contact Metav Werkzeuge to procure the Metav IndustryLine three‑point inside micrometer M312.163.P — Metav’s consultants in Emmerich can advise on fitting the instrument into inspection processes and will support prompt dispatch, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M312.163.P GTIN: 4054469158815 Manufacturer: Metav IndustryLine Facts Accuracy: 0.005 mm Readout (vernier): 0.005 mm Total length: 90 mm Weight: 4.4 kg Tariff number: 90173000 Analogue instrument Special features Suitable for blind‑hole bores Includes setting ring and extension (150xØ21,8) Matt chrome‑plated scale and vernier Hardened measuring faces Delivered in transport case FAQ What accuracy can be expected from the instrument? The instrument delivers an accuracy of 0.005 mm, documented by the vernier graduation and suitable for demanding inspection tasks where sub‑hundredth‑millimetre precision is required. Is this tool suitable for measuring blind bores? Yes — the three‑point contact geometry is specifically intended for blind‑hole measurement, providing centred contact and repeatable results in bores without through‑holes. What is included with delivery? Delivery of the M312.163.P includes a setting ring and an extension to facilitate calibration and reach; the package is supplied in a protective transport case. How durable is the measuring scale and contact surfaces? The scale and vernier are matt chrome‑plated for wear resistance and readability, while the measuring faces are hardened to withstand regular shop use. Can Metav advise on integrating this micrometer into inspection routines? Metav IndustryLine provides technical advice for integration into workshop and quality‑control processes; Metav’s consultants can suggest best‑practice handling and calibration procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Wire Measurement Micrometer Flat Anvil Carbide Faces, 0.01mm Graduation, Ratchet, Case - Metav IndustryLine
Benefit from precise, repeatable wire and sphere measurements thanks to carbide measuring faces, a fine 0.01 mm graduation and a ratchet drive that secures consistent measuring force. Use this compact, workshop-ready instrument to speed up quality checks and reduce rework; order directly via Metav Werkzeuge or consult our specialists for technical guidance. Micrometre for wire measurement 0–10 mm — carbide faces, ratchet (Metav IndustryLine) The Micrometre for wire measurement 0–10 mm is a compact precision instrument for reliably checking diameters of wires and small spheres in fine mechanical and laboratory applications. Carbide measuring faces for long wear resistance 0.01 mm graduation for fine resolution Ratchet drive for repeatable measuring force Compact 0–10 mm range for micro measurements Consistent accuracy for small diameters The instrument delivers measurable confidence where small differences matter: an accuracy of 0.004 mm combined with a 0.01 mm graduation suits tasks that require reliable dimensional control. With a measuring range of 0–10 mm, this micrometre falls into the Micro category, making it especially appropriate for watchmaking, jewellery, sensor components and other micro‑mechanical work where the balance between reach and rigidity is crucial. The clear, fine scale reduces interpretation error and speeds up inspection routines, supporting more efficient quality assurance. Durable construction reduces downtime Hard-wearing contact surfaces are a fundamental advantage for routine workshop use. The device features carbide measuring faces that resist wear and preserve measurement integrity over extended service life. Key mechanical parts — the measuring drum and frame — are matt chrome-plated, which limits corrosion and glare during inspection. The measuring face diameter of Ø 6.5 mm provides a defined contact area for small diameters, while the spindle pitch 0.5 mm offers precise, smooth advance for controlled adjustments. These design choices translate into fewer replacements and steadier long‑term performance. Repeatable measurements and user-friendly operation Repeatability is supported by the integrated ratchet drive, which standardises the closing force and lowers operator‑induced variation. The ratchet ensures a consistent tactile stop, so identical handling produces comparable results across different operators and shifts. At approximately 0.3 kg, the micrometre remains portable for bench or field checks without being prone to accidental movement. Thanks to its targeted geometry and control features, the tool streamlines serial checks of wires and spheres, reducing cycle times while maintaining measurement quality. Where this micrometre brings value Engineers and technicians benefit from a tool engineered for small‑part inspection: quick diameter verification, incoming goods checks and final part acceptance all become more reproducible. The carbide faces and compact range keep routine maintenance costs low and measurement drift minimal. By combining fine resolution, robust materials and a controlled measuring action, the instrument helps shorten fault‑finding loops and supports higher first‑pass yields in precision assemblies. For operations that routinely measure small diameters, this micrometre is a pragmatic addition to the metrology bench. For tailored advice on integrating this Metav IndustryLine micrometre into the workflow, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to request technical specifications or calibration options. Technical data Article number: M307.041 GTIN: 4054469117348 eClass: 21170328 ETIM: EC003590 Tariff number: 90173000 Numbers / Core technical data Measuring range: 0–10 mm Resolution (graduation): 0.01 mm Accuracy: 0.004 mm Measuring face Ø: 6.5 mm Spindle pitch: 0.5 mm Weight: 0.3 kg Special features Carbide measuring faces Ratchet drive for repeatable force Matt chrome-plated measuring drum and frame Suitable for measurement of wires and spheres Classification: Micro (0–10 mm) FAQ What materials are the measuring faces made from? The micrometre is fitted with carbide measuring faces, which are wear‑resistant and suited to repeated contact with small metallic parts; this extends service life compared with plain steel faces. How fine is the scale and what accuracy can be expected? The instrument shows a 0.01 mm graduation and an accuracy rating of 0.004 mm, which supports fine dimensional control typical for micro‑work. Does the ratchet improve measurement consistency? Yes. The integrated ratchet drive limits hand force variation and ensures a repeatable measuring action, improving comparability between operators and over time. Which applications are most suitable for this micrometre? Its 0–10 mm range and compact form make it ideal for wire, pin and ball diameter checks in watchmaking, jewellery, small‑part production and laboratory inspection. Is the instrument ready for workshop use out of the box? The micrometre is supplied complete with the features listed and designed for immediate use in routine inspection tasks; for traceable calibration options, Metav Werkzeuge can advise on available certificates and procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10–12mm Three-Point Inside Micrometer Self-Centering, Supplied in Case - Metav IndustryLine
The combination of precise self‑centring contact, a compact 10–12 mm measuring range and robust carbide faces ensures fast, repeatable blind‑hole measurements with minimal setup. Order the instrument directly via Metav Werkzeuge or consult the team for application advice. Metav IndustryLine Three‑Point Internal Micrometre MS908.652 — self‑centring, 10–12 mm range The Three‑Point Internal Micrometre MS908.652 is a compact analogue micrometre designed for precise diameter measurement inside blind holes and small bores in the 10–12 mm range. Self‑centring three‑point contact Measuring range 10–12 mm Accuracy 0.004 mm Carbide measuring faces Reliable centring for blind‑hole measurement A three‑point contact ensures rapid and reproducible alignment in blind holes, reducing repositioning time and measurement scatter. The micrometre’s self‑centring mechanism automatically locates the bore centre, so the operator obtains a consistent contact geometry on each measurement. With a measuring span of 10–12 mm the instrument is tailored to micro components and small bores where repeatability and short setup times are essential, improving throughput in small‑part inspection tasks. Durable contact surfaces for longer service life The measuring faces are manufactured as carbide contacts to resist wear and preserve accuracy during frequent use. The unit’s analogue design gives a tactile feel and straightforward reading, paired with a fine adjustment capability to approach tight fits carefully. The compact body (length approx. 54.5 mm) is suited to constrained access, while a setting ring (size 10) is included for verification and quick zeroing, supporting stable traceability in routine quality checks. Practical workflow advantages and workshop integration This three‑point micrometre combines simple operation with technical reliability: measurements are quick, calibration checks are straightforward and the tool integrates easily into existing inspection benches. Classified in the Micro range (max. 10–100 mm), it fulfils typical needs of precision engineering, watchmaking and small‑component production where stiffness, reach and single‑hand operation must be balanced. Metav’s distribution ensures European stock and reliable delivery from Emmerich. Request application guidance or order details from Metav Werkzeuge for the Metav IndustryLine three‑point internal micrometre MS908.652 — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS908.652 Brand: Metav IndustryLine Category: Micrometres Type: Three‑point internal micrometre Measuring range: 10.0–12.0 mm Minimum range: 10 mm Maximum range: 12 mm Accuracy: 0.004 mm Length: 54.5 mm Setting ring: 10 Self‑centring three‑point contact Carbide (hard metal) measuring faces Analogue operation (nonius style) Suitable for blind‑hole bores FAQ How does the three‑point contact improve measurement in blind holes? The three‑point geometry of the MS908.652 centres automatically in a bore, giving a stable contact triangle that reduces wobble and improves repeatability compared with single‑point probes. What measurement accuracy can be expected from this instrument? The instrument is specified with an accuracy of 0.004 mm; in routine use this delivers repeatable diameter readings for small‑bore inspection tasks. Is the micrometre suitable for workshop use or only for laboratory conditions? Designed for practical workshop use, the robust carbide faces and analogue adjustment make the MS908.652 resilient to frequent handling while keeping measurement quality high. How is the instrument returned to zero or checked on site? A setting ring (size 10) is provided for quick verification and zeroing of the micrometre before inspection runs. Which components and applications benefit most from this micrometre? Small bores, precision fittings, watch‑ and micro‑mechanical parts and any blind‑hole diameters in the 10–12 mm range benefit from the compact form, self‑centring contact and carbide faces of the MS908.652. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10–12mm Three-Point Internal Digital Bore Gauge RB6, Display mm/inch, 0.004mm Accuracy - Metav IndustryLine
Take advantage of precise digital readout, a compact 10–12 mm measuring range and an RB6 data interface for seamless recording and traceability; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital three-point internal micrometer M312.212 — 10–12 mm, digital display (mm/inch), RB6 output The Digital three-point internal micrometer M312.212 is a compact, workshop-ready instrument designed for reliable internal bore measurement, optimised for blind-hole inspection and fine mechanical applications. Digital readout with mm/inch and HOLD function High repeatability with ±0.004 mm accuracy Suitable for blind-hole measurements and RB6 output Precise measurement where repeatability matters The instrument combines a three-point measuring system with a high-resolution digital readout to reduce centring errors and provide consistent results in serial checks. With a display resolution of 0.001 mm and a stated accuracy of ±0.004 mm, this tool offers the kind of repeatability required for quality control in small-bore applications. The integrated RB6 data connection facilitates transfer of measured values into logging systems or SPC workflows, supporting measurable process stability and audit-friendly documentation. Compact handling for blind-hole and small-bore inspection Engineered for confined spaces, the micrometer’s measuring range 10–12 mm and compact form factor make it suitable for work on fine components and recessed bores. The geometry and three-point contact ensure a centred reading even in blind-hole situations, where conventional two-point probes can misalign. The instrument’s user controls — ON/OFF/SET, HOLD and mm/inch toggles — simplify operation under the bench lamp, enabling quick decisions during first-article inspection or in-process checks without sacrificing precision. Built for the workshop — dependable and easy to integrate At approximately 0.7 kg and with a practical overall length of 45 mm, this micrometer balances rigidity with manoeuvrability; handling is straightforward while stiffness helps to maintain measurement integrity. The design supports frequent use in production environments and benefits from Metav IndustryLine’s distribution and quality assurance: a reliable logistics and quality filter based in Emmerich ensures consistent availability and clear traceability for professional users who require trustworthy metrology equipment. How the three-point system and digital features improve workflow The three-point contact stabilises the probe within the bore and averages out minor eccentricities, producing a single centred value without complex alignment procedures. The digital interface not only shows readings in mm or inch but, via the RB6 output, enables collection of data for statistical evaluation or batch documentation. For precision technicians the combination of sub-micron display steps and robust mechanical centring translates into fewer re-measurements, faster set-ups and a measurable reduction in inspection time per part. Contact Metav Werkzeuge today to discuss whether the Metav IndustryLine digital three-point internal micrometer M312.212 with RB6 output fits the measurement task or to request a quotation; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M312.212 GTIN: 4054469169095 Category: Micrometers Core technical data Measuring range: 10–12 mm Resolution: 0.001 mm Accuracy: ±0.004 mm Weight: 0.7 kg Length: 45 mm Tariff number: 90173000 eClass: 21170335 ETIM: EC003590 Special features Digital display with ON/OFF/SET, HOLD and mm/inch functions Data output: RB 6 interface Designed for blind-hole measurement Three-point internal measuring system Suitable for fine mechanical and small-bore inspection FAQ What is the measuring range of this micrometer? The measuring range is 10–12 mm; the M312.212 is optimised for small-bore and recessed measurements. What resolution and accuracy can be expected? The instrument offers a display resolution of 0.001 mm and an accuracy of ±0.004 mm, suitable for high-repeatability checks. Can the micrometer measure blind holes? Yes — it is specifically designed for blind-hole measurement and uses a three-point system that centres reliably in recessed bores. How can measurement data be transferred? Measurements can be viewed in mm or inch and exported via the RB 6 data output; the M312.212 supports digital capture for traceable documentation. Is this instrument suitable for regular workshop use? Yes — its compact construction, robust three-point probe and clear digital controls make it well suited to recurring inspection tasks in a production environment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10–12mm Three-Point Internal Digital Gauge With Setting Ring, IP65 - Metav IndustryLine
Taking advantage of the combination of high‑precision measurement, robust ingress protection and integrated calibration accessories results in reliable internal diameter inspection and reproducible production checks. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M312.232.PN — Digital three‑point internal micrometer 10–12 mm, IP65 (Metav IndustryLine) A Digital three‑point internal micrometer M312.232.PN designed for precise measurement of small bores and blind‑hole inspection in workshop and production environments. Three‑point internal measurement for secure centring IP65 protection for dust and water resistance 0.004 mm accuracy for high‑precision results Includes setting ring and extension for calibration Precise, repeatable internal measurements for small bores The instrument is optimised for narrow internal diameters from 10 to 12 mm, providing a three‑point contact system that centres reliably in the bore and reduces measurement scatter compared with two‑point probes. With a measurement resolution of 0.001 mm and an overall accuracy of 0.004 mm, the device suits demanding quality control tasks where repeatability and traceability matter. The compact measuring span places this model in the micro category — ideal for delicate components and fine mechanical assemblies where a short, stiff measuring geometry improves handling and accuracy. Robust construction and intuitive digital operation Housed to IP65 rating, the instrument tolerates workshop conditions with protection against dust ingress and water jets, which extends service life in routine production environments. The digital display offers ON/PRESET, mm/inch switching and HOLD functionality, enabling quick read‑outs and straightforward recording during batch inspections. A dedicated RB 6 data output is provided for integration with data loggers or inspection software, supporting digital documentation of measured values and easing statistical process control workflows. Built‑in calibration aids and blind‑hole capability Delivered with a setting ring and a purpose‑matched extension (100×Ø5.8), calibration and setup are simplified, so measurement uncertainty is reduced from the first use. The design explicitly supports blind‑hole measurement, where secure centring and probe geometry are essential to reach and measure recessed bores reliably. Conformance to DIN 863 ensures the device meets recognised workshop standards for mechanical micrometers, giving a verifiable basis for quality checks. Practical benefits for production and inspection The compact, lightweight construction (approx. 0.7 kg) makes handling easy during repeated checks, while the three‑point contact and digital readout shorten cycle times for small‑part inspection. The combination of secure centring, high resolution and electronic output turns manual measurement into an efficient step in the measurement chain — suitable for inspection benches, assembly control stations and toolroom verification. Backed by Metav IndustryLine distribution, the product is positioned as a practical precision tool for workshops seeking dependable measurement without complex integration. For reliable internal bore inspection with Metav IndustryLine precision and integrated calibration accessories, contact Metav Werkzeuge for tailored advice and procurement assistance at their Emmerich location. Technical data Article number: M312.232.PN GTIN: 4054469179087 Manufacturer: Metav IndustryLine Label: Digital three‑point internal measurement 10–12 mm IP65 with setting ring Facts Measuring range: 10–12 mm Accuracy: 0.004 mm Resolution (display): 0.001 mm Weight: 0.7 kg Protection class: IP65 Data output: RB 6 Standard: DIN 863 Special features Digital display with ON/PRESET, mm/inch and HOLD Three‑point internal measuring system Setting ring included Extension included (100×Ø5.8) Suitable for blind‑hole measurement Category: Micrometers (Messschrauben) FAQ What measuring range does the instrument cover? The instrument measures internal diameters from 10 to 12 mm and is intended for fine‑bore inspection. Is the device suitable for blind‑hole bores? Yes, the M312.232.PN is suitable for blind‑hole measurement thanks to its three‑point centring geometry and included extension. What level of protection does the housing provide? The housing is rated IP65, offering dust protection and resistance to water jets for use in workshop conditions. Can measurement values be recorded electronically? Yes, the device provides a RB 6 data output for connection to data acquisition systems or inspection software. Which standards does the micrometer comply with? The instrument is supplied to the requirements of DIN 863 for mechanical micrometers and workshop measuring tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10–12mm Three-Point Internal Gauge With Setting Ring, Chrome-Plated Scale And Vernier, DIN 863 - Metav IndustryLine
Take advantage of a compact measuring solution that combines three-point internal measurement, a 10–12 mm range, and a finely graduated vernier for repeatable results in micro applications; the instrument is suitable for blind‑hole measurement and conforms to DIN 863. Order the micrometer directly via Metav Werkzeuge or consult the Metav team for application guidance. Three‑point internal micrometer M312.132 — 10–12 mm, adjustable setting ring (Metav IndustryLine) The Three‑point internal micrometer M312.132 is a precision instrument for measuring internal diameters from 10 to 12 mm, featuring an adjustable setting ring and a matt‑chrome scale for clear, low‑glare readings. Three‑point internal measurement Measuring range 10–12 mm Accuracy ±0.004 mm Carbide measuring faces Adjustable setting ring Precision for fine internal diameters The instrument delivers high repeatability for small bores by using a three‑point measuring head that centres automatically in the workpiece. With a measuring range of 10–12 mm and an indicated accuracy of ±0.004 mm, this micrometer is classified in the micro group for extremely compact, fine‑mechanical tasks. The vernier scale is matt‑chrome plated to reduce reflections and to provide clear, long‑lasting legibility under workshop lighting. Designed for blind‑hole and bore inspection Built to inspect blind holes and short bores, the tool’s geometry and adjustable setting ring allow secure positioning at the target depth. The three‑point contact ensures that the effective diameter is taken at a consistent plane, which reduces eccentricity errors inherent to single‑point probes. This design advantage supports reliable quality control in component assemblies, small housings and precision turned parts. Measuring faces and handling that support accuracy The micrometer is fitted with carbide measuring faces, providing wear resistance where surface contact occurs most. An analogue vernier with a reading step of 0.001 mm permits fine interpolation, while the robust spindle mechanism yields a predictable measuring motion. Together, these features lower measurement uncertainty and extend service life in routine inspection tasks. Standards, traceability and workshop integration Manufactured to DIN 863 standards, the device integrates easily into standard inspection routines and documentation. The compact form factor and light handling characteristics make it a practical choice for bench inspection or fixture checks. For operations seeking consistent measurement procedures, the micrometer complements existing gauges and contributes to a reproducible measurement chain. Contact Metav Werkzeuge for expert advice on the Metav IndustryLine three‑point internal micrometer M312.132 and to discuss delivery from Emmerich or specific application requirements Technical data Article number: M312.132 GTIN: 4054469119458 EClass: 21170335 ETIM: EC003590 Standard: DIN 863 Core specifications Measuring range: 10–12 mm Minimum range: 10 mm Maximum range: 12 mm Reading / resolution: 0.001 mm Accuracy: ±0.004 mm Length: 55 mm Commodity code: 90173000 Materials & features Scale and vernier matt‑chrome plated Carbide measuring faces Three‑point internal measuring head Adjustable setting ring (einstellring 10) Suitable for blind‑hole measurement Analogue vernier Extensions: 100xØ5,7 FAQ How precise is the instrument for small‑bore inspection? The three‑point internal micrometer M312.132 offers an indicated accuracy of ±0.004 mm and a reading resolution of 0.001 mm, making it suitable for tight tolerance internal measurements. Can this micrometer measure blind holes? Yes. The design supports blind‑hole measurement and the three‑point contact ensures consistent diameter readings even in short bores. What material are the measuring faces made from? The M312.132 is equipped with carbide measuring faces, chosen for wear resistance and long service life in routine inspection. Which standard does the instrument comply with? The device is manufactured to DIN 863, ensuring compatibility with common workshop inspection requirements. Is this instrument suitable for fixture or component checks in assembly? Yes. Its compact format and precise three‑point measuring head make it well suited to assembly and fixture verification tasks where small internal diameters must be confirmed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10–12mm Three-Point Internal Micrometer 0.001mm Reading With Setting Ring And Extension In Case - Metav IndustryLine
High-resolution 0.001 mm reading combined with three‑point internal measurement delivers reliable results for small bore inspection; the instrument includes a setting ring and an extension and is supplied in a protective case. Order the Three‑point internal micrometer M312.432 directly via Metav Werkzeuge or ask our consultants if needed. Three‑point internal micrometer M312.432 — 10–12 mm, 0.001 mm resolution (Metav IndustryLine) The Three‑point internal micrometer M312.432 is a precision instrument for measuring blind bores in the 10–12 mm range, designed for workshop and inspection tasks where sub‑micrometre readability is required 0.001 mm resolution Three‑point internal measurement Includes setting ring and extension Delivered in protective case Precision built for repeatable bore measurement The M312.432 combines a 0.001 mm reading with an assessed accuracy of ±0.004 mm, making it suitable where fine tolerance control is required. The three‑point measurement mechanism centres itself within the bore, reducing eccentricity and operator influence compared with single‑point probes. This instrument therefore provides a rational basis for quality decisions: measurable values that can be relied upon for process control and pass/fail assessment. Designed specifically for blind bore applications Engineered for blind holes, the micrometer features an extendable probe element (extension 101.6 x Ø5.8 mm) and a dedicated setting ring for quick zeroing and verification. The combination of probe length and compact head allows access into short to moderate blind bores without sacrificing stability. For workshop use this translates into faster inspection cycles and fewer transfers to separate measuring fixtures, supporting efficient throughput and fewer machine interruptions. Robust finish and practical transport solution Critical elements such as the matt‑chromed scale and vernier resist glare and aid clear reading under varied lighting. At approximately 0.6 kg, the instrument balances rigidity with manageable handling. Delivery in a protective case protects the instrument during transport and storage, preserving calibration and reducing downtime. The overall construction supports reliable daily use in production and inspection environments, offering both practicality and long‑term serviceability. Contact Metav Werkzeuge for tailored advice and to reserve the Three‑point internal micrometer M312.432 from our Emmerich stock. Technical data Article number: M312.432 GTIN: 4054469182148 Manufacturer: Metav IndustryLine Numbers / Core technical data Measurement range: 10–12 mm Resolution (reading): 0.001 mm Accuracy: ±0.004 mm Weight: 0.6 kg Extension: 101.6 x Ø5.8 mm Special features Three‑point internal measurement Suitable for blind bore measurement Includes setting ring Delivery in protective case Scale and vernier matt‑chromed FAQ What measurement range does the instrument cover? The instrument covers a measurement range of 10–12 mm, ideal for small internal diameters. What resolution and accuracy can be expected? The micrometer offers a 0.001 mm reading with an assessed accuracy of ±0.004 mm, allowing fine tolerance checks. Is the tool suitable for blind holes? Yes — the design and supplied extension make it especially suitable for blind bore measurement tasks. What accessories are supplied with the instrument? The delivery includes a setting ring, an extension (101.6 x Ø5.8 mm) and a protective case for transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10–12mm Three-Point Internal Micrometer Color Touchscreen, Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from the combination of three-point contact stability, a colour touchscreen readout and ISO 17025 traceable calibration to secure reproducible internal measurements in the 10.0–12.0 mm range. Order the Three‑Point Internal Micrometer directly via Metav Werkzeuge or consult our specialists for integration advice. Three‑Point Internal Micrometer — digital instrument with Wireless + USB (Microtech Metrology) The Three‑Point Internal Micrometer is a precision instrument for stable internal diameter measurement in small bores, suitable for quality control and bench metrology in workshops and production. Three-point contact for stable internal measurements Colour 1.5" touchscreen for clear readouts Wireless and USB data output for traceable transfer Delivered calibrated to ISO 17025 with certificate Dependable accuracy where tight tolerances matter The instrument combines a three-point contact measuring head with a high‑precision mechanism to reduce runout and centring error, delivering an accuracy of ±0.004 mm across its measuring span. With a measuring range of 10.0–12.0 mm, this device is aimed at fine internal dimensions where repeatability and a low measurement uncertainty are decisive. The robust contact geometry and confirmed specification make it well suited to small‑bore inspection tasks in component finishing and final inspection workflows, supporting a rational decision process for integrating metrology into production control. Seamless data capture for quality documentation Digital measurement is presented on a Colour 1.5" touchscreen for fast reading and reduced interpretation errors; the unit also provides Wireless and USB data output for direct transfer into SPC systems or inspection software. Combined with the included calibration trace, this workflow supports rapid documentation and traceability. The instrument’s readable display and straightforward data export reduce process steps and the risk of transcription mistakes, promoting efficiency and error‑resilient quality reporting in serial inspection and laboratory environments. Practical design for everyday workshop use A compact measuring head with an extended measuring depth of 154 mm keeps handling comfortable while reaching into bores and recesses. A setting ring is included to simplify zeroing and periodic checks. Delivered fully calibrated to ISO 17025, the micrometer arrives with a formal calibration certificate, providing immediate confidence for compliance audits and internal quality routines. The combination of robust measuring geometry, clear digital feedback and certified calibration supports both operational ease and trustworthy results, reinforcing productive workflows and peace of mind in routine inspections. For traceable high‑precision internal measurement solutions from Microtech Metrology, contact Metav Werkzeuge for ordering and application support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 133701210 GTIN: 4061905074202 Manufacturer: Microtech Metrology Numbers Measuring range: 10.0–12.0 mm Measuring depth: 154 mm Accuracy: ±0.004 mm Resolution/readout: 0.0001 mm Special features Digital display: Colour 1.5" touchscreen Data output: Wireless and USB Setting ring: included Delivered calibrated to ISO 17025 with certificate FAQ Is the instrument delivered with a calibration certificate? Yes. The Three‑Point Internal Micrometer from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability. What measurement range is covered by this micrometer? The device covers internal diameters from 10.0 to 12.0 mm and is designed specifically for high‑precision work within that span. How is measured data transferred to a PC or quality system? Measurement results can be exported via both Wireless and USB connections, enabling straightforward integration into inspection software and SPC workflows. What advantage does the three‑point contact offer? Three contact points centre in the bore automatically, reducing eccentricity and improving repeatability compared with two‑point methods, which is why this geometry is preferred for small‑bore internal measurements. Can the micrometer reach recessed bores? Yes. The instrument’s 154 mm measuring depth allows access to deeper internal features while maintaining the necessary measurement stability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com