Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
150mm Extension Ø15.5mm for Rod Internal Micrometer Sets, Compatible with 310.061 - Metav IndustryLine
Take advantage of the 150 mm extension's compact length and Ø 15.5 mm diameter to extend measurement reach with minimal added weight; the lightweight construction (0.2 kg) keeps handling straightforward while maintaining repeatable positioning. Order the extension directly via Metav Werkzeuge or contact the consultants for compatibility advice. Extension 150 mm, Ø 15.5 mm for 310.061 – Metav IndustryLine accessory The Extension 150 mm, Ø 15.5 mm for 310.061 is an accessory that increases reach for compatible measuring setups, designed for workshop and inspection use. 150 mm extension for added reach Ø 15.5 mm shaft for secure fit Lightweight 0.2 kg for easy handling Compatible accessory for 310.061 Extend reach without compromising stability The 150 mm extension provides a simple, cost‑effective method to increase measuring reach while preserving tool geometry. Fitted to the designated mating instrument, the extension length reduces the need for repeated repositioning of workpieces and shortens inspection cycles. The shaft's Ø 15.5 mm dimension ensures a stable connection that minimises play, translating into more consistent readings and less rework. This practical compatibility supports efficient throughput in routine quality checks. Quick integration and practical workshop benefits Designed as an accessory for existing measurement assemblies, this extension requires no special calibration beyond normal practice and adds negligible handling effort thanks to its 0.2 kg mass. The compact form factor keeps the centre of gravity close to the instrument, aiding one‑hand operation in confined setups. For production environments where rapid changeover and repeatable positioning matter, the extension reduces downtime and supports a smoother workflow by enabling measurements at greater depths or within recessed features without improvised adapters. Reliability backed by a trusted precision partner Sourcing this accessory from Metav IndustryLine brings the reassurance of a European quality filter and a broad spare‑parts inventory. Metav's approach to democratising precision means components like this extension are made available to workshops that require dependable, workaday metrology solutions. The accessory is presented as a practical enhancement rather than a complex upgrade, combining functional compatibility with straightforward handling to support consistent measurement practices across the shop floor. For ordering and compatibility checks contact Metav Werkzeuge in Emmerich; consultants are available to confirm fitment for 310.061 and to arrange delivery directly from the warehouse Technical data Article number: M310.061.S GTIN: 4054469118925 Label: Extension 150 mm, Ø 15,5 mm for 310.061 ECLASS: 21019104 ETIM: EC002219 Manufacturer: Metav IndustryLine Facts Length: 150 mm Diameter: Ø 15.5 mm Weight: 0.2 kg Tariff number: 90173000 Special features Accessory for 310.061 Category: Measuring instruments – Accessories Brand: Metav IndustryLine UID / SKU: M310.061.S FAQ Is this extension compatible with all models? Compatibility is specific to the designated mating instrument; the extension is intended for use with the 310.061 assembly and should be checked against that model before ordering. Does the extension affect measurement accuracy? When fitted correctly to the corresponding instrument, the extension maintains positional stability; the design reduces the need for workpiece manipulation, which can improve overall measurement repeatability. Is additional calibration required after fitting the extension? No special calibration is typically required beyond standard instrument checks; follow normal calibration practice for the measuring system after assembly. What materials and applications suit this accessory? The extension is a mechanical accessory; material suitability depends on the primary measuring instrument and the application rather than the extension itself. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Micrometre With Interchangeable Anvils, Touchscreen, Wireless/USB, ISO17025 Calibration Certificate - Microtech Metrology
Take advantage of high repeatable accuracy, extensive connectivity and a robust CNC‑machined aluminium housing for reliable in‑line measurement and traceable results. Order the instrument directly via Metav Werkzeuge or consult the Metav team for specification matching and integration into production workflows. Micrometer (wide‑range, interchangeable anvils, touchscreen) – Microtech Metrology The Micrometer is a wide‑range precision measuring instrument designed for production and laboratory metrology, offering interchangeable anvils, a 2.4" colour touchscreen and wireless plus USB data transfer for modern quality systems Sub‑micron resolution 0.0001 mm ISO 17025 calibration certificate included Wireless and USB data transfer modes Interchangeable anvils and setting rods included High‑precision measurement that supports production control This digital instrument delivers sub‑micron resolution and an accuracy of ±0.0035 mm, providing measurable benefit where small deviations affect function or assembly. The 0–150 mm measuring range covers typical workshop and toolroom tasks while preserving stiffness across the span, so repeatable checks of shafts, bearings and machined parts become feasible at line speed. The calibrated measurement basis supplied with an ISO 17025 certificate ensures traceability and simplifies incoming inspection documentation; confidence in conformity follows from an auditable calibration route rather than guesswork. Efficient data handling for Industry 4.0 workflows Connectivity is a core advantage: the instrument supports Wireless communication to the MDS app, multiple HID modes and USB HID for direct host integration. A built‑in memory manager holds 2000 values with folder structure and statistical overview, reducing manual logging and transcription errors. The 2.4" colour touchscreen and graphical modes (2D graphs, probe mode, Go/NoGo and Max/Min) speed up set‑ups and make quality decisions visible at a glance. For production environments this means faster decision loops, fewer stoppages and easier data transfer into SPC or MES systems. Practical design that endures workshop use Engineered from a CNC‑machined solid aluminium housing, the micrometer combines stability with manageable weight. Five interchangeable anvils and five setting rods allow adaptation to different measuring tasks without resorting to clumsy fixtures, while functions such as temperature correction and linear compensation reduce systematic error sources. The available toolset is ideal for toolmaking, small series production and laboratory tasks that require both tactile handling and digital traceability. Delivered with the necessary setting standards, the device is ready for immediate use and routine integration into quality procedures. Contact Metav Werkzeuge in Emmerich for a technical consultation or to discuss how the Microtech Metrology micrometer (SKU 110181539) can be integrated into existing inspection routines: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 110181539 GTIN: 4061905453380 Manufacturer: Microtech Metrology Measuring range: 0–150 mm Resolution: 0.0001 mm Accuracy: ±0.0035 mm Display: 2.4" colour touchscreen Data output: Wireless + USB HID Calibration: ISO 17025 (Ilac MRA) certificate included Accessories: 5 × setting rods, 5 × anvils Facts Memory capacity: 2000 values Touchscreen size: 2.4 inches Measuring span: 0–150 mm Resolution numeric: 0.0001 mm Accuracy numeric: ±0.0035 mm Special features CNC‑machined solid aluminium housing Interchangeable anvils (5 pcs) On‑line graphic and analog scale display Go/NoGo, Max/Min, Formula and Timer functions Linear correction and temperature correction Wireless MICROTECH instrument connection and synchronization 2D mode, 2D graph and probe mode Memory manager with folders and statistics Four data transfer modes: Wireless → MDS app; Wireless HID; Wireless HID + MAC; USB HID FAQ Is the micrometer delivered calibrated? Yes. The micrometer is supplied with an ISO 17025 calibration certificate and the instrument from Microtech Metrology is ready for traceable use immediately after receipt. Which interfaces are available for automated data capture? Data transfer options include Wireless to the MDS app, Wireless HID, Wireless HID+MAC and USB HID, enabling straightforward integration into PC‑based or mobile measurement workflows. What measuring range and resolution does the device offer? The device covers 0–150 mm with a resolution of 0.0001 mm, suitable for precision checks of small to medium components in production and laboratory settings. Are replacement anvils or additional setting rods provided? The scope of delivery includes 5 interchangeable anvils and 5 setting rods; additional accessories or spare parts can be ordered from Metav Werkzeuge or Microtech Metrology where available. Which production areas benefit most from this micrometer? Applications include toolroom inspection, small series production, bearing and shaft control, and any quality process requiring sub‑millimetre repeatability and digital traceability with Microtech Metrology instrumentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Outside Micrometer Set With Setting Gauge, Blue Powder Coated, Ratchet, DIN 863 - Metav IndustryLine
Take advantage of a workshop-grade micrometre set that combines repeatable measurements, robust construction and convenient transport: a six-piece analogue set covering 0–150 mm with 0.01 mm reading, ratchet spindle and hardened measuring faces for consistent results. Order the micrometre set directly via Metav Werkzeuge or ask our consultants if additional technical data is required. M304.424 — Outside micrometre set 0–150 mm, ratchet spindle (Metav IndustryLine) The M304.424 outside micrometre set is a six-piece, analogue workshop set intended for routine dimensional checks in metalworking and toolrooms, supplied with setting gauges and a transport case for secure handling. Measuring range 0–150 mm Resolution 0.01 mm (analogue) Ratchet spindle for repeatable pressure Delivered in transport case Consistent precision across the standard workshop range This six-piece set covers the standard workshop band (0–150 mm), a range that balances reach and rigidity for everyday machine-shop tasks. The analogue reading with 0.01 mm resolution and conformity with DIN 863 give a dependable basis for go/no-go checks and serial inspections, while the ratchet mechanism ensures a uniform measuring force for repeatability. For production environments seeking efficient quality control, the set’s construction reduces operator-induced variation and speeds up routine measurement tasks. Robust design for everyday handling and long service life The frames are blue powder-coated, protecting against wear in the workshop, while the matt-chrome measuring drum reduces glare and improves legibility. Hardened measuring faces guarantee resistance to wear and maintain contact geometry over time; the set includes a spindle with a 0.5 mm pitch and a 6.5 mm spindle diameter, giving a stable thread profile and fine adjustment feel. The combination of these elements supports long-term stability of readings and lowers maintenance needs compared with less substantial tools. Practical configuration for rapid setup and use Delivered as a six-piece set, the kit contains setting gauges in 25, 50, 75, 100 and 125 mm sizes for fast verification and user calibration of the instruments before measurement campaigns. The ratchet stop contributes to consistent contact pressure and reduces measurement scatter during repetitive checks. Supplied in a transport case, the set is protected in transit and can be stored conveniently between shifts; the complete set weight is 4.5 kg, reflecting solid construction suited to daily workshop handling. Suitable applications and trusted provenance The set is intended for machinery workshops, maintenance departments and toolrooms where robust, repeatable outside measurements are required. As an analogue, mechanical solution it pairs well with visual inspection routines and entry-level quality control tasks, offering clear advantages in speed and ergonomics over ad hoc measuring methods. The Metav IndustryLine pedigree and warehouse operations in Emmerich underpin a reliable supply chain for replacement gauges and accessories. Discuss the suitability of the Metav IndustryLine M304.424 micrometre set with Metav Werkzeuge to confirm delivery options and accessory availability from Emmerich. Technical data Article number: M304.424 GTIN: 4054469117027 Weight: 4.5 kg Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Set pieces: 6 Standard: DIN 863 Special features Blue powder-coated frame Matt-chrome measuring drum Hardened measuring faces Ratchet spindle for repeatable pressure Included setting gauges: 25, 50, 75, 100, 125 mm Analogue (mechanical) micrometres Supplied in transport case FAQ What accuracy can be expected from this micrometre set? The M304.424 set offers an analogue resolution of 0.01 mm and is manufactured to the DIN 863 standard, providing accuracy and repeatability suitable for workshop quality control. Does the set include setting gauges for verification? Yes; the M304.424 set is supplied with setting gauges of 25, 50, 75, 100 and 125 mm to verify and adjust the micrometres quickly before use. Are the measuring faces wear-resistant? The M304.424 features hardened measuring faces designed to resist wear and preserve contact geometry for sustained measurement integrity. What ensures repeatable contact pressure during measurement? A ratchet spindle is fitted to the micrometres in the M304.424 set to provide consistent contact pressure and reduce operator-induced variation. Is the set suitable for daily workshop use? The robust frame, matt-chrome drum and transport case of the M304.424 make it well suited to routine use in machine shops, maintenance departments and toolrooms. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Outside Micrometer With Six Interchangeable Carbide Anvils, Ratchet Stop, Matt Chrome Frame - Metav IndustryLine
The combination of robust carbide measuring faces, a ratcheted spindle and a fine 0.01 mm reading ensures reliable, repeatable external measurements across the standard workshop range; the instrument is delivered in a protective case and checked to factory standard. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. Outside micrometer M304.031 — 0–150 mm, carbide faces, ratchet (Metav IndustryLine) The M304.031 outside micrometer is a workshop micrometer designed for precise external measurements across the standard range, ideal for machining, toolroom and quality‑control tasks. Carbide measuring faces for wear resistance Standard 0–150 mm range for workshop applications Ratcheted spindle for consistent measuring force Matt-chrome-plated thimble for clear reading Delivered in a protective case for transport Reliable accuracy and traceable readings for everyday metrology The instrument offers a 0.01 mm reading step combined with an indicated accuracy of ±0.011 mm, providing a balance between practical usability and tight tolerance control. The ratcheted spindle ensures a reproducible measuring force, reducing operator variation and improving repeatability across successive checks. The spindle pitch of 0.5 mm and the robust spindle construction contribute to stable contact motion, while the carbide measuring faces protect the contact surfaces against wear during repetitive use. This makes the micrometer a rational choice where consistent, verifiable measurements are required for production and inspection. Designed for the standard workshop range with practical calibration aids Classified in the standard category (range up to 300 mm), the instrument covers the common 0–150 mm span used in metalworking and general mechanical workshops. It includes a set of adjustment standards at 25, 50, 75, 100 and 125 mm that permit quick functional checks and on‑the‑bench adjustment. The matt‑chrome‑plated thimble improves legibility under workshop lighting and reduces reflections that can slow down readings, while a compact, robust frame supports stable clamping during measurement. These features together reduce downtime and support efficient inspection routines on the shop floor. Practical handling, maintenance and transport considerations Built for frequent use, the instrument combines a durable finish with serviceable components: the matt‑chrome thimble and hardened contacts require only basic cleaning and occasional light lubrication to maintain smooth spindle action. The micrometer is supplied in a protective case for safe transport and storage, protecting the calibrated setting and contact faces from impact and contamination. Being supplied to factory standard (Werksnorm) means the instrument has been checked before dispatch; routine verification with the included adjustment standards will keep results consistent between formal calibrations. Where this micrometer delivers value in everyday production The outside micrometer is well suited to tasks such as final size checks, go/no‑go comparisons and setup verification for fixtures and small assemblies. The combination of carbide measuring faces, a repeatable ratcheting mechanism and clear graduations makes it especially useful where frequent, rapid checks are required and where tool wear over time must be minimised. For workshop managers and inspection personnel seeking a dependable analog instrument that performs under daily use, this model offers a pragmatic balance of durability and measurement quality. Contact Metav Werkzeuge for application guidance and to arrange supply of the M304.031 outside micrometer; our Emmerich team can advise on matching the instrument to specific workshop requirements and on verification options Technical Data SKU: M304.031 GTIN: 4054469115887 Manufacturer: Metav IndustryLine Facts Range: 0–150 mm Resolution: 0.01 mm Indicated accuracy: ±0.011 mm Weight: 1.6 kg Spindle pitch: 0.5 mm Spindle diameter: 8 mm Special features Carbide measuring faces Ratcheted spindle for consistent measuring force Matt-chrome-plated thimble Adjustment standards: 25/50/75/100/125 mm Delivered in protective case Factory standard calibration (Werksnorm) FAQ What measurement range does this micrometer cover? The outside micrometer covers a 0–150 mm range, making it suitable for standard workshop measurements and typical metalworking checks. How precise is the instrument in practical use? The instrument provides a 0.01 mm reading and an indicated accuracy of ±0.011 mm, with the ratcheted spindle helping to maintain consistent contact force and repeatable results. Are the measuring faces suitable for repeated workshop use? Yes, the micrometer is fitted with carbide measuring faces, which offer improved wear resistance for repeated inspections and prolonged accuracy. Does the micrometer include any accessories for verification? The instrument is supplied with adjustment standards at 25, 50, 75, 100 and 125 mm to enable routine functional checks and simple on‑bench adjustments. Is the micrometer delivered ready for transport and storage? The micrometer is supplied in a protective case to safeguard the instrument and its measuring faces during transport and when not in use. Which standard of calibration is applied before delivery? The instrument is checked to factory standard (Werksnorm) prior to dispatch and includes the adjustment aids mentioned for routine verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Outside Micrometre Set 6-Piece, Friction Ratchet, Matt Chrome Thimble, In Case - Metav IndustryLine
Take advantage of a compact, workshop-oriented micrometer set that combines consistent contact force, fine 0.01 mm resolution and a practical assortment of setting gauges to keep production and inspection moving. Order the set or request advice directly from Metav Werkzeuge for tailored procurement or technical clarification. Metav IndustryLine Micrometer set M304.244 – 0–150 mm, 6-piece, friction ratchet, matt‑chrome drum Metav IndustryLine Micrometer set M304.244 is a precision outside micrometer set designed for routine workshop measurement and quality control up to 150 mm. Friction ratchet for consistent measuring Matt-chrome measuring drum for durability Measuring range 0–150 mm, workshop standard Resolution 0.01 mm, mechanical precision Six sizes with standard setting gauges Reliable everyday precision for workshop and inspection This micrometer set is tailored to the standard workshop range (0–150 mm), which offers the best balance between reach and rigidity for most metalworking and machining tasks. The mechanical design follows DIN 863, ensuring that measurements are comparable to industry expectations. With a 0.01 mm reading resolution on the analogue scale, the instruments deliver precise, repeatable values that reduce rework and support faster decision-making on the shop floor. The set’s configuration supports typical production checks and first-article inspections without the need for elaborate procedures. Stable contact force and wear-resistant surfaces for reproducible results A built-in friction ratchet controls the applied measuring force and prevents over-tightening, which stabilises readings across different operators and shifts. The matt‑chrome measuring drum offers reduced glare and a durable surface finish that resists wear from regular use, preserving readability and accuracy over time. The spindle pitch of 0.5 mm allows smooth, fine engagement, while the spindle diameter specified in the technical data supports robust guidance under load. These design choices together lower measurement variability and support sustained throughput in a production environment. Complete set composition to streamline measurement workflows Supplied as a coordinated set of six micrometers with setting gauges at 25, 50, 75, 100 and 125 mm, the kit simplifies calibration and swap-out routines during shift changes. The set format reduces downtime when different ranges are required and facilitates quick cross-checks against workshop standards. The analogue operation and clear scale are ideal where battery-free reliability is preferred, and the compact assortment suits toolrooms, maintenance departments and inspection benches. Metav’s quality filter for the European market underpins the supply chain behind this kit, combining accessibility with dependable manufacturing support. Contact Metav Werkzeuge today to specify the Metav IndustryLine micrometer set M304.244 for your workshop or inspection needs — call +49 2822 7131930 or email info@metav-werkzeuge.com for product selection and ordering assistance Technical data Article number: M304.244 GTIN: 4054469116549 Manufacturer brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution / reading: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Number of pieces in set: 6 Standard: DIN 863 Special features Friction ratchet (consistent measuring force) Measuring drum matt‑chrome plated Setting gauges: 25 / 50 / 75 / 100 / 125 mm Analog (mechanical) operation Category: micrometer set (outside micrometers) FAQ What measurement accuracy can be expected from this micrometer set? The micrometer set M304.244 provides a mechanical reading resolution of 0.01 mm and is manufactured to the requirements of DIN 863, delivering industrially acceptable accuracy for workshop and routine quality control tasks. Are setting gauges included with the set? Yes, the set includes setting gauges at 25, 50, 75, 100 and 125 mm, allowing quick verification and adjustment of each micrometer in the kit. How does the friction ratchet benefit measurement consistency? The integrated friction ratchet on the micrometers of M304.244 ensures a uniform contact force at the measuring face, reducing operator-induced variation and improving repeatability between users. Is this set suitable for production floor use? Designed for workshop and inspection benches, the Metav IndustryLine micrometer set M304.244 combines robust surfaces and simple analogue operation, making it well suited for regular production checks and maintenance tasks. Which standard governs the design of these micrometers? The instruments are produced in accordance with DIN 863, which defines dimensions and performance for this class of mechanical micrometers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Setting Gauge 60° For Thread Micrometer Inserts, 0.06kg - Metav IndustryLine
Precise 60° reference and a 150 mm working length guarantee reliable setup of thread measuring instruments; the compact accessory reduces setup time while maintaining repeatable results. Order the setting gauge directly via Metav Werkzeuge or contact our consultants for application advice. Setting gauge 150 mm for thread micrometer (60°) — Metav IndustryLine The Setting gauge 150 mm for thread micrometer offers a stable 60° reference for setting and checking thread-measuring instruments in workshop and inspection environments. 150 mm hardened setting gauge 60° angle for thread insert measurement Lightweight 0.06 kg for easy handling Reliable reference for consistent measurement results The setting gauge provides a stable 60° datum that simplifies the calibration and verification of thread micrometers and related gauges. Manufactured for use in routine inspection and setup tasks, the device minimises operator variance by offering a fixed geometric reference; this reduces rework and speeds up changeovers. The hardened contact faces ensure long-term dimensional stability, so the reference remains trustworthy under frequent handling and light workshop use. Saves time at the workbench and in quality control With a clear 150 mm effective length, the gauge bridges the gap between compact fixtures and larger references, allowing quick transfer of settings between parts and instruments. The compact design supports rapid positioning and alignment, which streamlines measurement cycles and increases throughput. As a straightforward accessory for thread measurement, the tool integrates into existing workflows without requiring additional adapters or complex procedures, improving operational efficiency. Compatibility, variants and practical considerations Designed primarily for 60° thread inserts, the accessory is also noted for a 55° option where Whitworth standards apply, enabling compatibility across common thread systems. The product functions as a dedicated setting standard for thread micrometers and similar measuring devices and is best used alongside calibrated instruments to ensure traceability. Where a traceable calibration certificate is required, please enquire about available calibration services and documentation for integration into quality-management systems. Contact Metav Werkzeuge in Emmerich for tailored advice or to request a quotation for the 150 mm setting gauge for thread micrometers Technical Data Article number: M309.097.5 GTIN: 4054469118284 Label: Einstellmaß 150 mm für Gew.-Mikro, 60° 0,06 kg Facts Measuring length: 150 mm Angle: 60° Tariff number: 90173000 Special features Accessory for thread micrometers and thread measurement 60° reference for thread inserts, 55° option for Whitworth threads Category: Measuring instruments accessories FAQ What is the primary use of this setting gauge? The setting gauge is intended as a fixed 60° reference for the setting and verification of thread micrometers and related thread-measuring instruments. Is the 55° variant suitable for Whitworth threads? Yes, the product specification notes a 55° option specifically for Whitworth thread inserts where that form is required. Can this gauge be used as a calibration standard? The gauge can serve as a workshop reference; for formal calibration traceability, request information about calibration certificates and services when ordering the setting gauge. Which thread sizes or instruments is the gauge compatible with? The device is designed for use with thread micrometers and similar instruments that require a 60° reference; compatibility depends on the instrument’s measuring faces and intended application. What does the SKU M309.097.5 identify? SKU M309.097.5 uniquely identifies this 150 mm setting gauge variant in the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Setting Gauge For Thread Micrometer 55° For Whitworth Or Metric Inserts - Metav IndustryLine
Achieve consistent thread measurement with the compact 150 mm setting gauge offering a precise 55° Whitworth profile; the accessory improves repeatability and simplifies calibration workflows. Order the setting gauge directly via Metav Werkzeuge or consult our specialists for application advice. Setting gauge M309.091.5 — 150 mm, 55° thread calibration (Metav IndustryLine) The Setting gauge 150 mm for thread micrometer, 55° is a compact calibration reference designed for Whitworth thread micrometers and thread inserts, providing a reliable reference profile for workshop and quality‑control environments. 150 mm calibration reference 55° profile for Whitworth thread gauges Compatible with thread micrometers and inserts Precision where thread form matters A dedicated calibration reference ensures that the actual thread profile used for adjustment matches the measurement instrument. The compact gauge reproduces the classic 55° Whitworth flank angle, so calibration of thread micrometers and insert checks becomes a controlled process rather than an estimate. Using a fixed reference reduces operator‑dependent variation and supports consistent calibration results across multiple shifts or operators. The clear geometry of the gauge makes alignment straightforward while preserving the original thread contour for reproducible checks. Quick integration into workshop routines The small footprint and clear datum faces of this accessory mean fitment alongside standard inspection tools is uncomplicated. With a 150 mm length the gauge balances reach and handling – long enough to stabilise during a check, yet compact enough for bench use. The product functions as a setting master for micrometres and thread gauges, enabling fast verification during setup or after tool changes. By cutting calibration time and improving first‑pass acceptance, the accessory contributes directly to throughput and reduces non‑productive machine time. Built for dependable results and trusted supply As part of the Metav IndustryLine range, the gauge is offered from a European distribution hub that emphasises quality control and consistent availability. Relying on a purpose‑made reference for Whitworth profiles supports traceable measurement routines and strengthens internal quality assurance. The accessory complements existing verification routines and serves as a simple, robust tool to increase measurement confidence on the shop floor, delivering value through reduced rework and clearer evidence for inspection records. For workshop calibration support and dependable supply from our Emmerich hub, contact Metav Werkzeuge GmbH — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the M309.091.5 setting gauge and its application in the production process Technical data Article number: M309.091.5 GTIN: 4054469118154 ECLASS: 21170102 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Length: 150 mm Angle: 55° Special features 55° for Whitworth thread inserts 60° option applicable for standard thread inserts Accessory for thread micrometers and thread gauges Category: Accessory for measuring devices (Zubehör) FAQ How is this gauge used with a thread micrometer? The setting gauge M309.091.5 from Metav IndustryLine provides a fixed 55° reference profile; the micrometer is set or checked against that profile to verify thread form and calibration. Does the gauge support other thread profiles? The product is supplied with a 55° Whitworth profile; a 60° version is noted as the alternative for standard thread inserts and is referenced in the product specifications. Is the gauge suitable for routine workshop calibration? Yes, the compact format and clear datum faces make the M309.091.5 suitable for regular verification tasks and for confirming micrometer settings during setup. What documentation is supplied with the accessory? The item is an accessory for measurement devices and is delivered as described; further traceability or calibration certificates can be discussed with Metav Werkzeuge if required for quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Three-Point Inside Micrometer Digital Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of 0.004 mm repeatability, Wireless + USB data output and ISO 17025 calibration for dependable bore inspection; order this three‑point internal micrometer directly via Metav Werkzeuge or consult our specialists for application support. Dreipunkt‑Innenmessschraube — digital internal micrometer with Wireless + USB and touchscreen A digital three‑point internal micrometer designed for precision internal measurements in workshops and quality control, featuring a 6–150 mm measuring range and integrated data connectivity for streamlined inspection workflows. ISO 17025 calibrated with certificate High repeatability: 0.004 mm accuracy Wireless + USB data output Colour 1.54" touchscreen display Precision core for reliable bore measurement The instrument is built as a three‑point internal micrometer, a measuring principle that centres on three contact points to establish a stable datum inside bores and recesses. This geometry reduces eccentricity effects and improves repeatability for serial measurements, which is particularly valuable in component inspection or jig and fixture validation. With a measuring range of 6–150 mm, the tool sits in the Standard category for workshop metrology, offering a practical balance between reach and rigidity for everyday machining and inspection tasks. The delivery includes an ISO 17025 calibration certificate, confirming traceability and enabling immediate use in accredited processes. Connected measurement: faster data capture, fewer errors Digital readout and modern interfaces shift manual transcription to automated logging: the instrument provides Wireless + USB data output and a 1.54" colour touchscreen for clear, immediate readback. The display supports intuitive operation while the digital interface allows direct transfer of measurement results into SPC software or inspection reports, reducing administrative time and human error. Resolution is fine enough for demanding checks, making the gauge suitable for production lines where traceable, timely data is a priority. Integration capability therefore converts measurement accuracy into measurable process efficiency. Comprehensive set and application readiness Supplied as a set of 15 pieces, the package covers the full 6–150 mm span with appropriate measuring elements for stepwise bore assessment. The design focuses on stable contact and repeatable adjustment, delivering the stated 0.004 mm accuracy under controlled conditions and consistent technique. Calibrated to ISO 17025, the instrument arrives with a formal calibration certificate, allowing immediate use in quality plans and audits. The combination of high repeatability, digital output and accredited calibration makes this gauge a pragmatic choice for machine shops, toolrooms and quality laboratories seeking dependable internal measurement capability. Contact Metav Werkzeuge today to discuss the Microtech Metrology three‑point internal micrometer (SKU 133579130) and to arrange tailored advice on integrating calibrated, wireless measurement into your inspection routine. Technical data Article number: 133579130 GTIN: 4061905041754 Manufacturer: Microtech Metrology Data output: Wireless + USB Display: Colour 1.54" touchscreen Digital instrument: yes ISO 17025 calibration: included Facts Measuring range: 6–150 mm Resolution (display): 0.0001 mm Accuracy: 0.004 mm Set pieces: 15 Special features Three‑point internal measuring principle Digital readout with touchscreen Wireless and USB connectivity Supplied with calibration certificate FAQ What measuring range does the instrument cover? The internal micrometer covers a 6–150 mm range, supplied as a complete set of 15 pieces for staged measurement across that span. Is the gauge delivered calibrated for laboratory use? Yes, the micrometer is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate. How are measurement results transferred to inspection software? Results can be exported via Wireless + USB interfaces, enabling direct logging into SPC or inspection systems without manual entry. What accuracy and resolution can be expected during typical use? The instrument offers an accuracy of 0.004 mm with a display resolution of 0.0001 mm, suitable for routine high‑precision checks in production and quality control. Which environments or applications suit this micrometer best? Designed for workshop and laboratory inspection, the gauge is ideal for bore and internal feature measurement in machining, toolmaking and QA departments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Three-Point Internal Measurement Extension Suitable For M312.146–M312.157, M312.256–M312.267 - Metav IndustryLine
Take advantage of increased measuring reach and dependable mechanical fit to extend the capability of existing three‑point internal measuring sets; the combination of a 150 mm extension and a Ø29 connection ensures smooth integration and reliable repeatability. Order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. Extension 150 mm for three‑point internal measuring — Metav IndustryLine accessory with Ø29 connection and universal series compatibility The Extension 150 mm for three‑point internal measuring is an accessory designed to increase measurement reach for three‑point internal micrometers, compatible with series M312.146–153 and M312.256–267 for extended bore inspections 150 mm extension length Fits Ø29 connection diameter Compatible with M312.146–153 series Robust 0.5 kg extension body Extend reach without compromising measurement integrity The 150 mm extension converts standard three‑point internal micrometers into a practical solution for deeper bores while preserving repeatability and alignment. By adding a purpose‑made extension rather than improvising with improvised adapters, the measuring chain remains concentric and mechanically stable, which reduces radial runout and measurement scatter. This extension is engineered to interface cleanly with the matching three‑point systems, providing a measured increase in reach that is immediately available for production or inspection tasks without changes to established measurement procedures. Seamless fit with existing three‑point systems for efficient workshop use Designed for compatibility with the highlighted M312 series, the extension links directly to the matching heads, enabling quick assembly and minimal downtime. Its Ø29 connection diameter and standardised interface mean the accessory can be combined with several instrument variants from the same family, keeping handling and training simple. At 0.5 kg, the component is balanced for handheld setup yet substantial enough to preserve positional stability during insertion; this balance supports rapid changeovers and consistent results in routine quality control and maintenance cycles. Built for robust handling and predictable inspection workflows This accessory is intended for workshop environments where predictable, repeatable measurements matter. The mechanical design focuses on secure coupling and resistance to light impact or vibration that can occur during everyday use; the result is a component that helps maintain the integrity of the inspection process over many cycles. Choosing a factory‑matched extension reduces the need for makeshift solutions and supports traceable procedures, improving throughput while retaining confidence in measurement outcomes. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M312.154 extension into existing three‑point internal measuring sets and for delivery from Emmerich to your workshop Technical Data Article number: M312.154 GTIN: 4054469119601 Label: Verlängerung 150 mm Dreipunkt-Innenmess,312.146-153 kombinierbar Weight: 0.5 kg Measurements Extension length: 150 mm Connection diameter: Ø29 mm Customs tariff number: 90173000 Compatibility & Features Suitable for series M312.146–M312.157 and M312.256–M312.267 Accessory for three‑point internal measuring instruments Category: Zubehör (accessory) eClass: 21019104 ETIM: EC002219 FAQ Is this extension compatible with M312.146 heads? Yes. The extension is compatible with the M312.146–153 range and can be combined with those heads to extend measuring reach; reference SKU M312.154 for ordering. Can the extension be used to measure deep bores and recesses? The 150 mm add‑on increases the measureable depth for three‑point internal measuring assemblies, making it suitable for deeper bores where the original instrument reach is insufficient. How is the extension mounted to the measuring instrument? The extension uses the standard Ø29 connection interface to couple mechanically with the matching three‑point heads; assembly is a straightforward mechanical fit without special tools. Does the extension require calibration on its own? The extension is a mechanical accessory; calibration applies to the measuring instrument. For measurement traceability and formal certification requirements, consult Metav Werkzeuge regarding the calibration status of the complete measuring chain. What are the physical dimensions and weight? Length is 150 mm, connection diameter Ø29 mm and the component weight is 0.5 kg, providing a balance between handling convenience and mechanical stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Universal Micrometer, 0.01mm Graduation, Adjustable Anvil, 7 Anvil Inserts, Supplied in Case - Metav IndustryLine
Take advantage of precise measurement capability and flexible contact geometry to speed up inspection and reduce rework. The combination of a 0.01 mm graduation and a movable anvil with ratchet feed ensures repeatable external measurements across the 125–150 mm span. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Uni. Micrometer M309.175 – 125–150 mm range, 0.01 mm graduation (Metav IndustryLine) The Uni. Micrometer M309.175 is a robust external micrometer designed for workshop and inspection tasks in the standard measuring range, offering fine resolution and flexible contact options for diverse measuring situations. Precision 0.01 mm graduation Movable anvil for flexible positioning Includes seven pairs of measuring inserts Supplied in a transport box Precise external measurement for routine inspection The micrometer delivers a 0.01 mm reading step across a 125–150 mm measuring span, classifying it in the Standard range for general machine‑shop and metalworking applications. This range balances reach and rigidity, which means the instrument is suitable for everyday workpieces such as housings, shafts and larger fittings where both accessibility and measurement stability matter. The clear graduation and rotating spindle support swift, reliable readings, reducing cycle times in repetitive inspection tasks and contributing to fewer production rejects. Repeatable contact and adaptable measuring faces Equipped with a movable anvil and a ratchet feed, the instrument ensures consistent contact force and improved repeatability when measuring external dimensions. The set includes seven pairs of measuring inserts, allowing adaptation to shoulders, grooves and stepped parts without improvised workarounds. The rotating measuring spindle and the ratchet mechanism protect against over‑tightening and help maintain stable results across multiple measurements, which in turn supports faster quality decisions on the shop floor. Robust finish and transport-ready delivery for everyday use The measuring drum is matt chrome‑plated, offering a durable, low‑glare surface that resists wear and supports long‑term legibility. With a net weight of about 1.9 kg, the instrument is substantial enough to feel stable in the hand yet compact for bench use. Delivery includes a protective transport box and the set of exchangeable inserts, and the device is supplied with factory calibration under Werksnorm to ensure immediate usability after receipt. These attributes make maintenance straightforward and storage secure between shifts. Speak to Metav Werkzeuge for tailored application advice and to secure the Metav IndustryLine Uni. Micrometer M309.175 with movable anvil for reliable 125–150 mm external measurements; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M309.175 GTIN: 4054469118567 Category: Micrometers (Messschrauben) Label: Uni.-Mikrometer, 125 - 150 mm Abl. 0,01 mm, mit verschiebbarem Amboss,7 Einsätze Norm: Werksnorm Facts Measuring range: 125–150 mm Resolution / reading: 0.01 mm Measuring spindle diameter: 6.5 mm Weight: 1.9 kg Number of measuring inserts: 7 pairs Customs tariff number: 90173000 Special features Movable anvil for flexible positioning Ratchet feed for consistent contact force Rotating measuring spindle for smooth adjustment Matt chrome‑plated measuring drum Supplied in a transport box for safe handling Factory calibration (Werksnorm) FAQ What measurement resolution does the micrometer offer? The micrometer provides a resolution of 0.01 mm; the instrument’s graduation and ratchet feed support repeatable external measurements with the stability expected from a standard workshop micrometer. Can the device measure different external geometries? Yes. The movable anvil and the seven pairs of measuring inserts supplied with the Uni. Micrometer M309.175 enable contact adaptation for shoulders, grooves and stepped parts, so a single instrument can handle varied external geometries. Is the instrument suitable for production inspection in a machine shop? The standard 125–150 mm range and robust construction make the instrument well suited to routine production and inspection tasks in machine shops, jigs and fixtures environments where a balance of reach and stiffness is required. What is included in delivery? Delivery includes the micrometer, seven pairs of measuring inserts, a ratchet feed and a protective transport box; the device is supplied with a factory calibration under Werksnorm. How should the micrometer be maintained to preserve accuracy? Keep the measuring faces clean and free of chips, avoid shocks, apply light machine oil to the spindle when necessary, and store the instrument in its transport box. Periodic recalibration is advised to maintain traceable accuracy; the instrument arrives with factory calibration (Werksnorm). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Universal Test Micrometer With Seven Pairs Of Measuring Inserts, Colour Touchscreen, IP65, ISO 17025 - Microtech Metrology
Take advantage of a fully calibrated measuring solution with a ±0.005 mm accuracy and a responsive 2.4" touchscreen for faster inspections; the integrated wireless and USB data outputs keep traceability seamless in the production flow. Order the Universal micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Universal micrometer — 125–150 mm, digital touch display (Microtech Metrology) Universal micrometer designed for medium-range dimensional control in workshop and inspection environments, combining robust IP65 protection with precise digital readout and factory calibration. High precision ±0.005 mm accuracy Colour 2.4" touchscreen display Wireless and USB data output Supplied fully calibrated to ISO 17025 Precision that supports reliable quality decisions The instrument delivers a stable measuring range of 125–150 mm with an industrial-grade accuracy of ±0.005 mm, making it suitable for routine dimensional checks and final inspection steps. A fine display reading of 0.0001 mm enables clear visualisation of incremental changes, while the included 7 pairs of measuring anvils extend the micrometer's versatility across different diameters and component geometries. These characteristics translate into fewer re-measures and faster decisions on the shop floor, reducing downtime and scrap rates by improving first-pass yield. Streamlined data capture and process integration Equipped with a responsive 2.4" touchscreen, the device simplifies measurement handling and settings, reducing operator time per reading. Measurement values are exported via wireless connection or USB for direct transfer into inspection software or a manufacturing execution system; this removes manual transcription errors and creates an auditable data trail. The digital interface and reliable data transfer accelerate quality documentation and support traceable batch records, which is essential for regulated production and continuous improvement initiatives. Rugged engineering for regular workshop use The micrometer is built to withstand daily use: the construction includes a non-rotating spindle which reduces wear on the measuring faces and improves repeatability over long service intervals. With an IP65 rating, the instrument resists dust ingress and water jets, so it performs reliably in typical machine-shop atmospheres. The robust design and clear readout make the device especially suitable where measurements must be taken at bench, lathe, or assembly station without sacrificing accuracy or requiring special handling. Certified calibration for inspection-ready delivery This instrument is delivered fully calibrated with an ISO 17025 calibration certificate, confirming traceability to national standards and acceptance for formal inspection procedures. The supplied certificate documents the measurement uncertainty and the conditions under which calibration was performed, enabling straightforward integration into a quality management system. For operations that require validated inspection tools on receiving or prior to production runs, the supplied calibration removes an administrative step and provides immediate confidence in measurement results. Contact Metav Werkzeuge in Emmerich for technical guidance, delivery options and application support for the Microtech Metrology Universal micrometer (SKU 110751508) Technical data SKU: 110751508 GTIN: 4061905040382 Manufacturer: Microtech Metrology Type: Universal micrometer Measuring range: 125–150 mm Accuracy: ±0.005 mm Reading/resolution: 0.0001 mm Display: Colour 2.4" touchscreen Data output: Wireless, USB Protection class: IP65 Supplied with: 7 pairs of measuring anvils Calibration: ISO 17025 certificate included Key figures Measuring range min: 125 mm Measuring range max: 150 mm Accuracy: 0.005 mm Reading/resolution: 0.0001 mm Display size: 2.4 inches Features Digital micrometer with colour touchscreen Wireless and USB data transfer Dust- and water-resistant (IP65) Non-rotating spindle for improved repeatability Supplied calibrated with ISO 17025 certificate Includes 7 pairs of measuring anvils FAQ What measuring range does this micrometer cover? The Universal micrometer covers a measuring range of 125–150 mm and is intended for medium-range dimensional checks in workshops and inspection labs. Is the micrometer delivered calibrated and traceable? Yes, the instrument is supplied fully calibrated with an ISO 17025 calibration certificate documenting traceability and measurement uncertainty. How are measurement values exported from the device? Measurement data can be transferred from the micrometer via wireless connection or USB to inspection software or data-collection systems. What protection does the instrument offer against shop-floor conditions? The micrometer carries an IP65 rating, providing protection against dust ingress and low-pressure water jets to ensure reliable operation in typical workshop environments. Which accessories are supplied with the micrometer? The delivery includes seven pairs of measuring anvils to cover a range of diameters and measurement situations, enabling flexible application without immediate additional tooling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150–175 mm Digital Micrometer 0.001 mm Resolution Ratchet Frame, Matt Chrome Measuring Drum, Supplied in Case - Metav IndustryLine
Take advantage of high-resolution measurement, repeatable spindle force and robust construction for dependable workshop control; order the item directly via Metav Werkzeuge or contact our consultants for application advice. Digital Micrometer M302.260 — 150–175 mm, 0.001 mm resolution The Digital Micrometer M302.260 is a workshop-grade micrometer for precise external dimension checks on medium-sized components, suited to production control and quality assurance tasks in mechanical workshops. Resolution 0.001 mm for submicron checks Digital display with ABS/INC/UNIT functions Ratchet spindle for repeatable measuring force Hardened measuring faces for long service life Precision that reduces rework and saves production time The instrument delivers a 0.001 mm readout, enabling markedly finer discrimination than standard workshop gauges. The combination of fine resolution and a ratchet spindle ensures measurements are reproducible by different operators, which reduces cycle time caused by repeat checks and lowers the risk of costly rework. Compliance with DIN 863 signals that the design follows accepted metrology principles, supporting consistent quality control decisions on the shop floor. Fast, unambiguous digital readout and simple handling A digital display with ON/OFF/SET and ABS/INC/UNIT keys simplifies transfer between absolute and incremental modes and allows quick unit changes, which speeds up measurement routines and documentation. The instrument’s hardened measuring faces maintain their geometry under frequent use, so the digital precision remains meaningful in everyday inspection work. The matt‑chromed measuring drum and painted frame improve legibility and resist shine that can obscure scale reading, supporting reliable data capture in varied lighting conditions. Designed for robust daily use in standard workshop ranges With a measuring range classified in the Standard (100–300 mm) group, this micrometer bridges universal reach and manageable handling for typical machine‑shop components such as shafts, housings and turned parts. The construction materials—painted frame and matt‑chrome measuring drum—balance durability with ergonomics; the instrument stands up to regular handling without unnecessary weight. The product is listed under ECLASS and ETIM for straightforward procurement and integrates into existing inspection routines as a dependable external‑dimension gauge. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge to request the Digital Micrometer M302.260 or to discuss suitability for specific inspection tasks Technical data Article number: M302.260 GTIN: 4054469151786 TARIC/Customs code: 90173000 Category: Messschrauben Standard: DIN 863 Facts Measuring range: 150–175 mm Resolution/readout: 0.001 mm Display type: Digital with ON/OFF/SET and ABS/INC/UNIT Measuring face diameter: 6.5 mm ECLASS: 21170328 ETIM: EC003590 Special features Frame: painted; measuring drum matt chrome‑plated Ratchet spindle for constant measuring force Hardened measuring faces Setting point reference: from measuring range 25–50 mm Digital indicator: yes FAQ What measuring range does this micrometer cover? The Digital Micrometer M302.260 covers a measuring range of 150–175 mm, placing it in the standard class for workshop use. What resolution and accuracy can be expected? The instrument provides a 0.001 mm readout; combined with the ratchet spindle and hardened faces, this resolution supports fine external measurements suitable for precision control tasks. Which display modes are available on the digital indicator? The digital indicator on the M302.260 includes ON/OFF/SET and ABS/INC/UNIT functions, enabling absolute and incremental readings and straightforward unit selection. Is the micrometer suitable for heavy production use? Yes — the painted frame, matt‑chrome measuring drum and hardened measuring faces are specified to withstand regular workshop handling, making the M302.260 appropriate for repeated inspections in a production environment. Does the micrometer comply with recognised standards? The device is designed in accordance with DIN 863, ensuring it meets common metrological expectations for external thread and dimension measurement tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Dial Micrometer With 30mm Anvil, Ratchet Stop, Painted Frame And Matt Chrome Thimble - Metav IndustryLine
Take advantage of a robust workshop micrometer that pairs a Ø30 mm disc anvil with a non-rotating spindle and ratchet stop for highly repeatable readings; order the instrument via Metav Werkzeuge or consult their specialists for application advice. Disc-Anvil Micrometer ND 150–175 mm (Ø30 mm) — Metav IndustryLine The Disc-Anvil Micrometer ND 150–175 mm (Ø30 mm) is a precision analogue micrometer for standard workshop measurement tasks, offering a stable contact geometry and features that support reproducible dimension checks. Ø30 mm disc anvil for stable contact Non-rotating spindle for repeatable readings Ratchet stop for consistent measuring force Supplied in transport case for safe handling Accurate, repeatable measurements that speed up inspection The instrument delivers a clear 0.01 mm reading combined with a stated accuracy of 0.007 mm, providing a reliable balance between resolution and robustness for everyday quality control. The non-rotating spindle reduces measurement artefacts caused by spindle rotation, while the ratchet stop enforces a consistent measuring force — both features that lower scatter between successive measurements and reduce the need for repeated checks. Designed for standard workshop spans, the 150–175 mm range covers medium-sized components commonly encountered in machining and assembly; this makes the tool an efficient choice for production inspection where speed and reproducibility matter. Solid construction for repeatable handling and long service life Built with a lacquered frame and a matt chrome-plated measuring drum, the micrometer combines corrosion-resistant finishes with a tactile, durable control surface. The Ø30 mm disc anvil provides a broad support area that stabilises contact on uneven or larger profiles, translating into fewer local deformations and more trustworthy measurements. At around 1.9 kg, the instrument conveys a reassuring mass that aids steadiness during use without compromising manoeuvrability for typical workshop handling. Supplied in a protective case, the unit is ready for transport between workstations and secure storage during shift changes. Workflow benefits and practical integration into quality processes As an analogue instrument with straightforward mechanical operation, the micrometer offers low-maintenance reliability and immediate readiness for shop-floor use. Marked by its SKU and traceable identifiers, the tool supports clear inventory and inspection records; the robust measuring geometry and ergonomic ratchet reduce operator influence, which helps maintain consistent parts acceptance criteria and shortens inspection cycles. For teams seeking pragmatic improvements in first-pass yield and fewer reworks, this model represents a cost-effective instrument that slots into existing quality-control routines with minimal setup. Contact Metav Werkzeuge for tailored advice on how the Metav IndustryLine disc-anvil micrometer M309.256 fits specific inspection tasks or to request a detailed specification sheet from the Emmerich site. Technical Data Article number: M309.256 GTIN: 4054469118758 Category: Messschrauben (micrometers) Tariff number: 90173000 Data Measuring range: 150–175 mm Anvil diameter: Ø30 mm Reading (resolution): 0.01 mm Accuracy: 0.007 mm Weight: 1.9 kg Special features Lacquered frame Matt chrome-plated measuring drum Non-rotating spindle Ratchet stop Analogue instrument Supplied in transport case FAQ What is the measuring range of this micrometer? The measuring range is 150–175 mm for the Metav IndustryLine disc-anvil micrometer M309.256, covering typical medium-sized workshop components. How precise is the instrument in everyday use? Resolution is 0.01 mm with an accuracy specification of 0.007 mm, which supports reliable production checks and routine quality control. Why is a non-rotating spindle beneficial? A non-rotating spindle reduces measurement errors introduced by spindle rotation; in the M309.256 this improves repeatability across repeated measurements. Does the micrometer come with a protective case? Yes, the micrometer is supplied in a transport case to protect the instrument during handling and transit. What role does the ratchet stop play? The ratchet stop enforces a consistent measuring force on each reading, helping to reduce operator-induced variation and improve reproducibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Digital Thread Micrometer Without Anvils 60° Setting, RB 4.1 Data Output, Plastic Case - Metav IndustryLine
Take advantage of a high‑resolution digital readout and stable mechanical design to speed up thread inspection while keeping results traceable. The combination of 0.001 mm resolution, a 150–175 mm measuring range and an integrated data interface ensures efficient process control; order the instrument directly via Metav Werkzeuge or consult the team for application advice. Digital thread micrometer M302.197.D – 150–175 mm, 0.001 mm resolution (Metav IndustryLine) The Digital thread micrometer M302.197.D is a workshop‑grade instrument for precise measurement of thread dimensions and pitches across the standard range 150–175 mm, suitable for production and quality control environments. 0.001 mm digital resolution Measuring range 150–175 mm RB 4.1 data output for traceability Supplied in protective case Consistent precision for workshop and production control The instrument delivers high repeatability thanks to a finely graduated digital system with a resolution of 0.001 mm, making it suitable for routine quality checks and process control. With an indicated accuracy of approximately ±0.014 mm, the device bridges the gap between general inspection tools and specialist metrology equipment; this level of performance supports decision‑making in metalworking and component assembly. Classification as a standard‑range instrument reflects the balance between measuring reach and rigidity, which is ideal for everyday tasks in machine shops and production lines. Reliable measurement process with digital connectivity Data capture and traceability are simplified by the incorporated RB 4.1 interface, which enables direct transmission of measurement values into data loggers or quality management systems. The digital display features ON/OFF, ABS/INC, UNIT and SET functions for straightforward operation and quick unit changes, while the ability to output measurements electronically reduces transcription errors and speeds up documentation. The supplied protective case preserves calibration and transport safety, supporting consistent measurement quality across different work locations. Practical design that reduces operator influence Mechanical measures to enhance reproducibility include a non‑rotating spindle with a 6.5 mm diameter and a ratchet drive to standardise contact force at the measuring faces. The spindle arrangement and ratchet mechanism minimise variable operator pressure and help to obtain repeatable readings when comparing batches or verifying setups. The instrument is supplied without additional inserts, and it includes a 60° reference setting for thread measurement, which keeps handling straightforward while maintaining the necessary application focus. Contact Metav Werkzeuge to request the M302.197.D with RB 4.1 interface and protective case or to discuss suitability for specific thread types — +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M302.197.D GTIN: 4054469115269 Brand: Metav IndustryLine Core data Measuring range: 150–175 mm Resolution: 0.001 mm Indicated accuracy: 0.014 mm Weight: 1.4 kg Measuring spindle diameter: 6.5 mm Features Digital display with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Ratchet for consistent measuring force Non‑rotating spindle Supplied in protective plastic or wooden case Supplied without exchangeable inserts 60° reference setting for thread measurement FAQ What measuring range does this micrometer cover? The instrument covers a measuring range of 150–175 mm, making it a standard‑range tool for workshop and production use. What resolution and accuracy can be expected? The digital readout provides a resolution of 0.001 mm and an indicated accuracy around ±0.014 mm, suitable for routine metrology and quality control tasks. Is the micrometer suitable for integration into a measurement data system? Yes. The device includes an RB 4.1 data output which permits direct transmission of readings into compatible data collection and quality systems. Are there features to improve repeatability between operators? The micrometer uses a ratchet drive and a non‑rotating spindle, both of which help to standardise contact force and reduce operator‑induced variation. Does the delivery include protection for transport and storage? The instrument is supplied in a protective case for secure transport and storage, which helps to maintain measuring integrity between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Digital Uni Micrometer With 7 Replaceable Measuring Inserts, Non‑Rotating Spindle 0.001mm, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.001 mm resolution, a non-rotating spindle and replaceable measuring anvils for consistent, repeatable inspection results; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Uni-Micrometer M302.046.D — digital micrometer with 150–175 mm range and 0.001 mm resolution Digital Uni-Micrometer M302.046.D provides high-resolution external measurement across a 150–175 mm span and is designed for workshop and inspection use with a non-rotating measuring spindle and ratchet stop. Digital readout 0.001 mm resolution Non-rotating spindle for repeatable readings Includes 7 specialised interchangeable anvils Ratchet stop for constant measuring force Accurate, repeatable measurements for production control This digital uni-micrometer delivers high-resolution readings with a 0.001 mm display step and a specified measurement accuracy of 0.014 mm, making it suitable for demanding workshop inspections and quality control checks. The non-rotating spindle reduces backlash and runout that can affect repeatability, while the integrated ratchet stop ensures a constant measuring force at each reading. The combination of these technical details reduces operator-induced variation and improves process reliability in serial measurement tasks. Flexible range and fast data transfer for traceable results Equipped with a measuring range of 150–175 mm and supplied with 7 interchangeable anvils, the instrument adapts to different part geometries without the need for multiple micrometers. The digital display features ON/OFF, ABS/INC, UNIT and SET functions for straightforward operation, and the device offers data output via RB 4.1 for integration into inspection logs or SPC systems. This configuration supports efficient batch documentation and reduces manual transcription errors, so measurement results are easier to store and analyse. Robust build and workshop-ready delivery The frame is painted for corrosion resistance and the measuring drum is matt-chrome plated, combining durability with a low-reflectivity finish that aids legibility. Weighing 1.4 kg, the assembly feels steady in hand, supporting stable measurements over the full span. Delivery includes a protective case and seven pairs of specialised measuring inserts, so the instrument arrives ready for immediate use on the shop floor. The tool is supplied to factory standard (Werksnorm) and is designed for everyday industrial use where consistent, easy-to-read measurement is required. For precise external dimension inspection relying on the Metav IndustryLine build quality, contact Metav Werkzeuge in Emmerich for tailored advice and swift supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M302.046.D GTIN: 4054469114316 Manufacturer: Metav IndustryLine Facts Measuring range: 150–175 mm Resolution: 0.001 mm (0.00005 in) Specified accuracy: 0.014 mm Weight: 1.4 kg Measuring spindle diameter: 6.5 mm Data output: RB 4.1 Special features 7 pairs of specialised interchangeable anvils included Non-rotating measuring spindle Ratchet stop for reproducible measuring force Frame painted, measuring drum matt-chrome plated Digital display with ON/OFF, ABS/INC, UNIT and SET keys Supplied in protective case Norm: Werksnorm FAQ What measuring range does this micrometer cover? The digital uni-micrometer covers a measuring range of 150–175 mm and is supplied as the Metav IndustryLine micrometer M302.046.D. How fine is the displayed resolution and what is the accuracy? The display resolution is 0.001 mm and the specified accuracy for the device is 0.014 mm as quoted for the Metav IndustryLine digital micrometer M302.046.D. Are interchangeable anvils included for different part geometries? Yes — the delivery includes seven pairs of specialised interchangeable anvils to adapt the micrometer to varied external profiles. Can measurement data be exported to a computer or SPC system? Yes, the instrument provides a data output via RB 4.1 to enable transfer of readings into inspection documentation or SPC workflows. What ensures consistent measuring force during measurement? The micrometer is fitted with a ratchet stop, which provides a consistent measuring force and improves repeatability of readings for production control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Micrometer with 35mm Measuring Faces, Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Combining ISO 17025 traceable calibration, wireless data transfer and a large-area 35 mm disc contact yields a micrometer that supports reproducible measurements in production and inspection. Benefit from precise external measurement (150–175 mm range, ±0.008 mm) and a clear touchscreen readout; order via Metav Werkzeuge or consult our specialists for integration advice. Digital Micrometer 150–175 mm — Touchscreen, Wireless + USB (Microtech Metrology) A Digital Micrometer 150–175 mm engineered for precise external measurement of medium-sized components in production, toolroom and quality-control environments. ISO 17025 calibrated with certificate 35 mm disc faces for stable contact Touchscreen display 1.54″ for clear readings Wireless + USB data output for traceability Reliable precision backed by accredited calibration The micrometer is delivered fully calibrated to ISO 17025, including a calibration certificate, which provides documented traceability for audit and quality-control processes. The instrument’s stated resolution and performance produce a reliable measurement scatter of ±0.008 mm, making it suitable where reproducible tolerances matter. Accredited calibration reduces uncertainty in acceptance tests and supports compliance in documented inspection routines without additional immediate rework. Stable contact and spindle design for consistent results Equipped with 35 mm disc measurement faces, the device increases contact area to reduce local surface deformation on soft or irregular parts and improves averaging across small surface variations. The non-rotating spindle prevents surface damage and removes the variability introduced by spindle rotation during contact, which is particularly useful when measuring finished or coated components. The 150–175 mm measuring range places the instrument in the standard class for everyday workshop and machine‑shop tasks, combining reach with handling convenience. Modern data handling to speed up inspection workflows A 1.54″ touchscreen provides an uncluttered digital readout, minimising reading errors common with analogue instruments. With Wireless + USB outputs, measurement values can be exported directly to SPC or inspection software, eliminating manual transcription and enabling automated logging for batch reports. This connectivity supports faster batch acceptance, easier documentation and improved statistical monitoring of process capability. Robust use in production and metrology environments The construction and specification are aimed at routine use in toolrooms, component production and incoming inspection. The device’s features focus on repeatability and documentation rather than experimental metrology, making it a practical choice for laboratories that require accredited calibration with immediate usability on the shop floor. The combination of a clear digital interface, large contact faces and accredited calibration supports both operational efficiency and supplier or customer audits. Contact Metav Werkzeuge today for consulting on integrating the Microtech Metrology digital micrometer into inspection routines or to arrange purchase with ISO 17025 calibration documentation; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 110781757 GTIN: 4061905457494 Manufacturer: Microtech Metrology Digital display: Touchscreen 1.54″ Facts Measuring range: 150–175 mm Accuracy / uncertainty: 0.008 mm Measuring face diameter: Ø35 mm Data output: Wireless + USB Special features Delivered with ISO 17025 calibration certificate Non-rotating spindle Digital device for production and inspection use Category: Messschrauben (micrometers) FAQ Is the micrometer supplied with a calibration certificate? Yes. The micrometer is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability and audit purposes. What measuring range and accuracy can be expected? The instrument covers a measuring range of 150–175 mm with a stated measurement uncertainty of 0.008 mm, suitable for standard workshop and production checks. How are measurement values transferred to inspection software? Measurement data can be exported via the Wireless + USB interfaces, enabling direct logging into SPC or inspection systems to reduce manual transcription. Are the measuring faces suitable for finished surfaces? The 35 mm disc faces provide a larger contact area that reduces point loading on finished or soft surfaces; combined with the non-rotating spindle, this helps protect workpiece surfaces. What applications is this micrometer best suited for? This device is aimed at production quality control, incoming inspection and toolroom measurement tasks where reproducible external measurements and traceable calibration are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150–175mm Ratchet Thimble Micrometer 0.01mm, Blue Powder Coating, Matt Chrome Spindle - Metav IndustryLine
Take advantage of the ratchet stop and 0.01 mm readout for repeatable external measurements in workshop and inspection tasks, combined with a robust powder‑coated frame and carbide measuring faces for durability. Order the item directly via Metav Werkzeuge or request technical advice from our consultants for specification matching. M304.414 Outside Micrometer (150–175 mm) — 0.01 mm resolution, ratchet stop A M304.414 outside micrometer designed for precise external measurement tasks in general engineering and workshop quality control, classified in the standard measurement range for routine metalworking use Outside micrometer 150–175 mm range 0.01 mm resolution, DIN 863 Ratchet stop for reproducible force Blue powder‑coated frame with chrome drum Consistent accuracy for everyday workshop measurement The micrometer delivers a 0.01 mm analogue readout that meets workshop accuracy expectations and complies with DIN 863, offering a reliable basis for routine inspection. With a measurement range of 150–175 mm it falls into the standard range category, which balances reach and stiffness for most machine‑shop tasks. The spindle pitch of 0.5 mm produces fine linear feed per thimble revolution, enabling precise incremental setting together with the engraved thimble graduations. This combination supports efficient quality checks and clear numerical traceability on dimensional records. Durable construction and controlled measuring force Built for daily workshop use, the instrument features a blue powder‑coated frame and a matt‑chrome plated measuring drum that resist wear and handling marks. The measuring faces are fitted with carbide measuring faces, reducing wear when measuring harder materials and improving long‑term reproducibility. The integrated ratchet stop ensures a controlled measuring pressure on each reading, significantly reducing operator‑induced variation. The spindle diameter of 6.5 mm and the sturdy frame geometry add rigidity so that measurements remain stable across repeated use. Practical delivery and workshop integration The micrometer is supplied in a protective case suitable for transport and safe storage during workshop routines. As an analogue instrument it requires no batteries and is immediately ready for on‑bench work; the mechanical vernier principle and the ratchet mechanism make it especially well suited to repetitive measuring tasks. For users seeking compatibility with existing inspection workflows, the instrument’s conformity to DIN 863 and clear mechanical scale facilitate straightforward documentation and training without specialised software. For precise, dependable external measurement choose the Metav IndustryLine M304.414 — contact Metav Werkzeuge in Emmerich for a technical consultation, availability details or to arrange a tailored supply: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: M304.414 GTIN: 4054469116938 Category: Micrometers / Messschrauben Standard: DIN 863 ECLASS: 21170328 ETIM: EC003590 Facts Measurement range: 150–175 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm per revolution Spindle diameter: 6.5 mm Analog instrument (mechanical) Special features Ratchet stop for reproducible measuring force Carbide measuring faces Blue powder‑coated frame Matt‑chrome plated measuring drum Supplied in protective case for transport FAQ What is the accuracy of this micrometer? The Metav IndustryLine M304.414 outside micrometer offers a resolution of 0.01 mm and is manufactured to meet the tolerances expected under DIN 863 for standard analogue micrometers. Are the measuring faces hardened for wear resistance? Yes, the measuring faces on this micrometer are carbide and provide improved wear resistance for long service life during routine metalworking checks. How does the ratchet stop help during measurement? The ratchet stop on the M304.414 ensures a consistent measuring force across readings, reducing variation from operator pressure and improving repeatability. Is the micrometer ready for workshop use out of the box? The instrument is delivered complete in a protective case and is ready for immediate use; as a mechanical device it requires no power source. Which materials is this micrometer suitable for measuring? With carbide faces and robust construction, the micrometer is suitable for a wide range of engineering materials commonly encountered in workshops, including steel and non‑ferrous metals. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Thread Micrometer With 150mm Setting Gauge 60°, Analogue, Wooden/Plastic Case - Metav IndustryLine
The combination of a 150–175 mm measuring range, a non-rotating measuring spindle and the supplied 150 mm 60° setting gauge makes this instrument ideal where reliable thread inspection and consistent production control are required; delivered in a protective case for safe transport. Order the Thread Micrometer M309.097 directly via Metav Werkzeuge or ask our consultants if needed. Thread Micrometer M309.097 — 150–175 mm range, non-rotating spindle (Metav IndustryLine) The Thread Micrometer M309.097 is a rugged analogue instrument designed for precise inspection of external threads and pitch diameters within the 150–175 mm measuring range. Precision range 150–175 mm Mechanical reading 0.01 mm resolution Non-rotating measuring spindle Incl. 150 mm 60° setting gauge Precise measurement that reduces rework and waste The instrument combines a generous 150–175 mm span with a fine 0.01 mm reading and a documented 0.014 mm accuracy, providing a clear technical basis for confident pass/fail decisions on the shop floor. The non-rotating measuring spindle reduces measurement variation caused by spindle torque or operator-induced rotation, which increases repeatability across multiple measurements. As a mechanically driven device with a conventional scale, this micrometer delivers fast, no‑dependency inspection that supports higher throughput in production checks and reduces the risk of scrapped components. Built for repeatable handling and workshop use A robust mechanical build and a measured weight of 1.4 kg give the instrument the stability required for routine QC tasks without excessive bulk. The included 150 mm 60° setting gauge allows immediate zeroing and controlled setup, shortening preparation times and helping to maintain traceability of successive checks. Delivered in a protective case, the tool is ready for safe storage and transport between inspection stations. These practical features translate into less downtime and a more predictable inspection routine for maintenance teams and small-series manufacturers. Practical application and quality assurance benefits Designed specifically for thread inspection, the micrometer’s geometry and supplied setting gauge fit common 60° thread profiles used in metric and imperial workflows, enabling direct measurement of thread-related dimensions where a dedicated instrument is required. The analogue design keeps the device straightforward to service and calibrate, while the non-rotating spindle addresses a frequent source of operator error. For workshops seeking a balance of ease of use, proven mechanical reliability and measurement certainty, this instrument offers an effective solution that integrates into existing quality control processes. For tailored advice on integrating Metav IndustryLine measuring tools into inspection workflows, contact Metav Werkzeuge in Emmerich for expert consultation and reliable supply. Technical data Article number: M309.097 GTIN: 4054469118222 Category: Micrometers — Thread micrometers Customs tariff number: 90173000 Facts Measuring range: 150–175 mm Stated accuracy: 0.014 mm Resolution / reading: 0.01 mm Spindle diameter: 6.5 mm Weight: 1.4 kg Special features Analogue mechanical instrument Non-rotating measuring spindle Includes 150 mm 60° setting gauge Delivered in protective case Suitable for external thread inspection FAQ What threads can be measured with this micrometer? The Thread Micrometer M309.097 is intended for inspection of external threads and pitch-related dimensions within a measuring range of 150–175 mm. What accuracy and resolution does the instrument offer? The instrument has a resolution of 0.01 mm and a stated accuracy of 0.014 mm, providing reliable discrimination for production control. Does the spindle rotate during measurement? The device features a non-rotating measuring spindle, which improves repeatability and reduces operator-induced variation. What is included in the delivery? Delivery includes the micrometer itself, a 150 mm 60° setting gauge for setup and adjustment, and a protective case for transport and storage. Is this a digital instrument? No — this is an analogue mechanical micrometer designed for straightforward workshop use and easy maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Three-Point Inside Micrometer Self-Centring, 0.008mm Accuracy, Supplied in Case - Metav IndustryLine
Take advantage of the combination of self‑centring three‑point contact, measuring range 150–175 mm and accuracy ±0.008 mm for consistent internal diameter checks in workshop and inspection routines. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Three‑point internal micrometer M836.721 — Self‑centring precision, 150–175 mm (Metav IndustryLine) The three‑point internal micrometer is a precision gauge designed for reliable internal diameter measurement in production, inspection and toolroom environments, featuring a self‑centring anvil system for repeatable centring and analogue vernier reading for straightforward interpretation. Self‑centring three‑point anvil design Accuracy ±0.008 mm Reading graduation 0.005 mm Hardened measuring faces for wear resistance Reduce rework with reproducible centring The three‑point contact system provides automatic centration of the measured bore, which significantly reduces variation between successive readings. By combining self‑centring geometry with a tight accuracy ±0.008 mm, the instrument supports quality control processes where repeated internal diameter checks must be both fast and dependable. This benefit translates directly into fewer rejects and lower rework rates in serial production. Clear analogue measurement for robust environments As an analogue instrument with a vernier-style graduation, the gauge offers a reading of 0.005 mm, enabling precise readings without dependence on batteries or electronics. This simplicity makes the tool well suited to workshop benches and inspection tables where robustness and immediate usability are priorities. The mechanical display is easy to maintain and avoids downtime related to electronic faults. Designed for longevity under frequent use The measuring faces are hardened, ensuring resistance to abrasion and preserving accuracy over prolonged use. The construction is geared towards repeated internal measurements in metalworking and fabrication contexts; hardened contact surfaces and a stable spindle minimise wear-induced drift and extend the service life of the instrument. Practical operation and interpretation Operation follows familiar micrometer practice: the three anvils expand against the bore and centre automatically, while the spindle and vernier provide the final reading. The vernier division of 0.005 mm allows technicians to interpret results quickly; for users new to vernier scales, the simple alignment method offers a clear path from raw measurement to documented value without complex conversion steps. Suitable for workshop and inspection workflows With a measuring range of 150–175 mm, the instrument fills the mid‑range need for internal diameter verification commonly required in tooling, fixtures and component inspection. Its combination of range and repeatable centring makes it an efficient choice for batch inspections where one gauge can cover several nominal sizes without sacrificing stiffness or handling comfort. Integrating the gauge into quality management The stable mechanical design and defined accuracy simplify traceability in routine checks and help to establish consistent measurement routines on the shop floor. Documentation of measurement tasks becomes more reliable when instruments deliver predictable performance; the three‑point internal micrometer supports such traceable inspection practices through its repeatable contact geometry and robust readout. For specification guidance or to secure the M836.721 for your inspection bench, contact Metav Werkzeuge for expert advice and order support: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M836.721 GTIN: 4061905040986 Manufacturer: Metav IndustryLine eClass: 21170335 ETIM: EC003590 Facts Measuring range: 150–175 mm Accuracy: ±0.008 mm Reading / graduation: 0.005 mm Instrument type: Analogue internal micrometer Special features Three‑point self‑centring anvil Hardened measuring faces Designed for internal diameter measurement Analogue vernier operation FAQ How accurate is this internal micrometer? The three‑point internal micrometer delivers an accuracy of ±0.008 mm, with a vernier reading to 0.005 mm, making it suitable for routine inspection and workshop control tasks. What measuring range does the instrument cover? The M836.721 covers a 150–175 mm range, intended for medium‑sized bores commonly encountered in tooling and component inspection. Why use a three‑point design instead of two anvils? A three‑point arrangement centres automatically in the bore, improving repeatability and reducing operator‑dependent eccentricity compared with two‑point gauges. Is the gauge suitable for daily workshop use? Yes. The hardened measuring faces and analogue construction are well matched to frequent use, providing wear resistance and simple maintenance without electronic dependencies. How is a reading taken on the vernier? Rotate the spindle until the three anvils contact the bore and read the main scale together with the vernier division; the vernier provides the 0.005 mm fraction to complete the measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Three-Point Internal Measuring Calliper With Carbide Measuring Faces, Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of a robust, workshop‑ready internal gauge that combines a three‑point measuring system, wear‑resistant carbide faces and a consistent ratchet stop for reproducible results; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M312.148 Three‑point Internal Micrometer — 150–175 mm range, carbide measuring faces (Metav IndustryLine) The M312.148 is a three‑point internal micrometer designed for precise internal diameter measurement in machine shops and quality assurance environments. Three‑point measuring mechanism Carbide measuring faces for wear resistance 150–175 mm measuring range Ratchet stop for uniform measuring force High precision for repeatable internal measurement The instrument’s three‑point contact system provides centring and repeatability that conventional two‑point gauges rarely achieve, making it suitable for internal bores and stepped diameters. With a reading of 0.005 mm and an indicated accuracy of 0.007 mm, this mechanical gauge sits in the higher precision class for analog internal measuring tools; the combination of fine resolution and tight error band reduces rework and supports reliable pass/fail decisions on the shop floor. Durable construction and consistent operation Built with carbide measuring faces, the gauge resists wear from repeated contact in production use, prolonging service life and stabilising measurement over time. The scale and vernier are matt chrome‑plated, improving contrast and corrosion resistance under typical workshop conditions. A ratchet stop ensures a consistent measuring force, which lowers operator influence on results and simplifies operator training. The instrument is supplied in a protective transport case and is delivered without a setting ring. Practical range and workshop suitability Classified as a standard‑range instrument (max measuring range up to 300 mm), the micrometer’s 150–175 mm span and measuring depth 140 mm cover common internal diameters encountered in general machining, fixture assembly and quality control. As an analogue vernier device it offers robust operation where simple, proven mechanics are preferred over electronics, and it integrates easily into existing inspection workflows while delivering clear, traceable readings. For procurement or technical advice on the Metav IndustryLine M312.148 three‑point internal micrometer, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our product specialists will assist with selection and delivery. Technical data SKU: M312.148 GTIN: 4054469119540 Tariff number: 90173000 EClass: 21170335 ETIM: EC003590 Core specifications Measuring range: 150–175 mm Measuring depth: 140 mm Reading: 0.005 mm Indicated accuracy: 0.007 mm Materials and features Three‑point internal measuring instrument Carbide measuring faces Scale and vernier matt chrome‑plated Ratchet stop for repeatable force Analogue vernier operation Delivered in a protective transport case Supplied without setting ring FAQ What measuring range does this instrument cover? The M312.148 covers an internal measuring range of 150–175 mm, suitable for standard workshop applications. Are the measuring faces durable for production use? Yes, the gauge features carbide measuring faces, which provide high wear resistance for repeated production measurements. Does the product include a setting or calibration ring? The instrument is delivered without a setting ring; calibration or adjustment accessories must be ordered separately if required. What type of readout does the instrument use? This is an analogue vernier instrument with a reading of 0.005 mm and an indicated accuracy of 0.007 mm. Is the instrument supplied with protective packaging? The M312.148 is supplied in a protective transport case to safeguard the instrument during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Three-Point Internal Micrometer For Blind Holes With Carbide Measuring Faces, Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a three-point measuring system, carbide measuring faces and a robust ratchet stop for reliable blind-hole measurements in production environments. Order the instrument directly via Metav Werkzeuge or consult our specialists for specification support. Three-point inside micrometer M312.148.S — 150–175 mm range, carbide measuring faces (Metav IndustryLine) The Three-point inside micrometer M312.148.S is an analogue internal measuring instrument designed for precise measurement of blind holes in machine and toolmaking applications, providing dependable readings across the 150–175 mm range. Three-point system for blind-hole measurement Carbide measuring faces for wear resistance Ratchet stop for consistent measuring force Analogue scale, accuracy 0.007 mm Accurate blind-hole measurement with a three-point system The three-point measuring mechanism ensures that contact across the diameter is evenly distributed, which stabilises the gauge during measurement and reduces centring errors common with two-point designs. Combined with carbide measuring faces, the device retains its geometry under repetitive use, providing a consistent 0.007 mm accuracy that supports tight production tolerances. This setup is particularly effective for internal diameters where access is limited and where repeatable positioning is essential for process control. Built for workshop conditions and repeatable results A hardened, matt-chrome plated scale and vernier deliver a clear analogue reading that avoids electronic sensitivity in harsh environments; the incorporated ratchet stop enforces a uniform measuring force to reduce operator-induced deviation. The instrument’s measuring depth of 140 mm allows access into deeper blind holes while the solid construction balances rigidity and handling for everyday shop-floor use. The absence of an adjustment ring is noted in the scope of delivery and should be considered when planning calibration or ring-based comparators. Practical benefits and typical applications Classified within the standard range for internal gauges, this three-point micrometer is suitable for workshop and production settings in general engineering, toolmaking and quality control where internal diameters between 150 and 175 mm are common. The analogue design demands minimal maintenance and excels where electromagnetic interference or battery dependence are concerns. Delivered without an adjustment ring, the instrument is nonetheless ready for immediate integration into routine inspection tasks and is ideal for repeat checks on blind-hole bores in components and fixtures. For dependable blind-hole measurement in the workshop, choose the Metav IndustryLine three-point inside micrometer and contact Metav Werkzeuge for order and specification assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M312.148.S GTIN: 4054469158709 ECLASS: 21170335 ETIM: EC003590 Tariff number: 90173000 Numbers / Core technical data Measuring range: 150–175 mm Accuracy: 0.007 mm Measuring depth: 140 mm Weight: 3.5 kg Reading type: analogue Design / Special features Three-point measuring system Carbide measuring faces (HM) Ratchet stop Delivery without adjustment ring Scale and vernier matt chrome-plated Designed for blind-hole (sackloch) measurement FAQ How does the three-point system improve blind-hole measurements? The three-point arrangement of the M312.148.S centres itself in the bore and produces a stable contact condition, improving repeatability for blind-hole diameters compared with two-point gauges. Is the instrument suitable for shop-floor use in production? Yes, the Metav IndustryLine three-point inside micrometer is built for workshop conditions: its matt-chrome scale, ratchet stop and carbide measuring faces make it robust for regular use in production inspections. Does the delivery include an adjustment ring or calibration certificate? The delivery of the M312.148.S is specified without an adjustment ring; calibration certificates are not stated in the product data, so calibration arrangements should be verified with Metav Werkzeuge if required. What depth of blind-hole can be measured reliably? The instrument provides a measuring depth of 140 mm, enabling access to fairly deep blind holes within the specified 150–175 mm measuring range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Universal Micrometer With 7 Interchangeable Anvils, Setting Gauge, Friction Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of a robust 150–175 mm measuring range combined with a friction ratchet and interchangeable measuring anvils for reproducible, versatile external measurements; order the instrument directly via Metav Werkzeuge or consult the specialists for application advice. Universal Micrometer M309.086 — 150–175 mm, interchangeable anvils | Metav IndustryLine The Universal Micrometer M309.086 is a workshop-grade outside micrometer designed for precise dimensional checks on shafts, rings and turned components across the 150–175 mm band. 150–175 mm measurement range Interchangeable measuring anvils Friction ratchet for reproducible force Supplied with 7 pairs of special inserts Confidence in repeatable precision for everyday inspection A mechanical micrometer built for consistent readings, the instrument offers a 0.01 mm reading step and a declared accuracy ±0.014 mm, which places it well within standard workshop tolerances for industrial quality control. The integrated friction ratchet ensures constant measuring force, reducing operator-induced variation and supporting repeatable results during serial checks. The non-rotating spindle further preserves the contact surface and helps maintain stable zero and long-term accuracy, making the design appropriate for regular use in production and incoming inspection. Versatile measurement capability through interchangeable anvils Interchangeable measuring anvils expand the range of achievable contact geometries without the need for multiple tools: seven pairs of special measuring inserts are supplied, enabling assessment of different profiles and step measurements with the same micrometer. This adaptability reduces setup times and increases throughput when alternating between batches or part families. The instrument’s lacquered frame and matt chrome-plated measuring drum provide a resilient exterior that resists shop-floor wear while the solid construction (approx. 1.4 kg total mass) gives tactile stability during handling. Designed for practical integration in workshop routines The micrometer follows the manufacturer’s factory standard, supplied ready for use with a setting gauge as specified for the relevant ranges. The robust 6.5 mm measuring spindle diameter and analogue operation cater to environments where tactile feedback and mechanical reliability are preferred over electronic systems. Clear numeric markings and a straightforward adjustment sequence make the tool suitable for machine shops, toolrooms and quality departments seeking a dependable instrument for external diameter checks. For specialist tasks, the interchangeable inserts and friction ratchet together provide a practical balance between precision and operational speed. Discuss specific measurement requirements with Metav Werkzeuge to determine how the Metav IndustryLine Universal Micrometer M309.086 fits into existing inspection processes and to arrange prompt delivery from Emmerich. Technical Data Article number: M309.086 GTIN: 4054469117898 Category: Messschrauben (Micrometers) Tariff number: 90173000 Facts Measuring range: 150–175 mm Measuring spindle diameter: 6.5 mm Resolution / Reading: 0.01 mm Indicated accuracy: 0.014 mm Weight: 1.4 kg Number of special measuring inserts supplied: 7 pairs Special features Analogue mechanical micrometer Interchangeable measuring anvils Friction ratchet for reproducible measuring force Non-rotating spindle to reduce wear Frame lacquered; measuring drum matt chrome-plated Supplied to factory standard (Werksnorm) FAQ What measurement range does this micrometer cover? The micrometer covers a measuring range of 150–175 mm, suitable for medium-sized turned parts and components; the Universal Micrometer M309.086 is optimised for that band. Are interchangeable anvils included and how many? Yes, the instrument is supplied with 7 pairs of special measuring inserts, enabling different contact geometries without changing tools. How is measurement repeatability ensured? Repeatability is supported by the friction ratchet, which provides a constant measuring force, and the non-rotating spindle that preserves contact integrity for stable readings with the Metav IndustryLine micrometer M309.086. Is the micrometer ready for immediate use on delivery? The tool is supplied to the manufacturer’s factory standard; a setting gauge relevant to the specified ranges is provided so the instrument can be put into service quickly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150–175mm Universal Micrometer With 7 Pair Measuring Inserts, Colour 2.4" Touchscreen, IP65, ISO 17025 - Microtech Metrology
Take advantage of the combination of ISO 17025 calibration, robust IP65 protection and flexible Wireless + USB data transfer for dependable shop-floor measurement and traceable results. Order the Universal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Universal micrometer — Digital micrometer with 2.4" colour touchscreen and ISO 17025 calibration (Microtech Metrology) The Universal micrometer is a digital precision micrometer designed for inspection and workshop use, offering a 150–175 mm measuring range, tactile colour display and protected operation up to IP65. ISO 17025 calibration certificate included 150–175 mm measuring range Reading 0.0001 mm resolution Wireless + USB data transfer Calibration and accuracy for traceable decision-making The micrometer is delivered with an ISO 17025 calibration certificate, ensuring traceability and conformity to laboratory standards; this makes the instrument suitable where documented measurement uncertainty is required. With a specified accuracy of ±0.006 mm and a fine reading of 0.0001 mm, the instrument provides reliable numerical evidence for quality control processes, reducing rework and enabling confident pass/fail decisions on the production line. Efficient data flow and workshop ergonomics Equipped with a Colour 2.4" touchscreen and Wireless + USB outputs, the electronic device streamlines data capture into inspection software and SPC systems without interrupting workflow. The non-rotating spindle improves repeatability during external measurements, while the supplied seven pairs of measuring anvils broaden the range of contact geometries. With sealed electronics to IP65 rating, measurements can be taken in harsher environments with reduced concern about coolant or dust ingress, protecting investment and reducing downtime. Designed for everyday industrial use and broad applicability The 150–175 mm span classifies this instrument in the Standard range, which balances measuring reach with rigidity and one-handed operation—ideal for machine shops, toolrooms and in-process inspection. The robust design and digital readout simplify routine checks and first-article inspections, while the integrated data interfaces enable fast documentation. As an electronic micrometer with laboratory-grade calibration, it suits medium-format components where reproducibility and certified results are essential. Contact Metav Werkzeuge today for advice on integrating the ISO 17025‑calibrated Universal micrometer into inspection workflows; reach the Metav team in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: 110751758 GTIN: 4061905040672 Manufacturer: Microtech Metrology Facts Measuring range: 150–175 mm Accuracy: ±0.006 mm Reading / resolution: 0.0001 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Protection class: IP65 Digital: yes ECLASS: 21170328 ETIM: EC003590 Special features ISO 17025 calibration and certificate included Non-rotating spindle Supplied with 7 pairs of measuring anvils Delivered as a digital micrometer with protected electronics FAQ Is the micrometer calibrated when delivered? Yes. The Universal micrometer from Microtech Metrology is supplied with an ISO 17025 calibration certificate, documenting traceable measurement results. What is the usable measuring range and how is it classified? The instrument covers 150–175 mm, which places it in the Standard range suitable for general machine‑shop and metalworking inspection tasks. How are readings exported from the device? Measurements can be transferred via Wireless + USB interfaces to data collection systems or a PC for SPC and reporting. How precise are the measurements in practice? The micrometer specifies an accuracy of ±0.006 mm with a display resolution of 0.0001 mm, offering a reliable balance between resolution and industrial robustness. Is the micrometer appropriate for shop-floor use where coolant or dust is present? Yes. The sealed design meets IP65 protection, which guards against dust and low‑pressure water jets and supports use in demanding production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150–250mm Three-Point Internal Micrometer Digital Touchscreen, ISO 17025 Calibrated Wireless/USB - Microtech Metrology
Take advantage of the combination of industrial-grade accuracy ±0.005 mm, integrated Wireless + USB data output and an included ISO 17025 calibration certificate for reliable, traceable internal-diameter inspection. Order the device directly via Metav Werkzeuge or consult their specialists for application-specific advice and delivery options. Three-point inside micrometer — Digital inside micrometer with colour touchscreen and wireless data transfer (Microtech Metrology) A three-point inside micrometer designed for precise internal-diameter measurement in workshop and quality-control environments, offering digital readout and straightforward data export for efficient inspection workflows. Calibrated to ISO 17025 standard Measurement range 150–250 mm High precision ±0.005 mm accuracy Wireless + USB data output Measure reliably across standard workshop ranges The micrometer delivers industrial-grade precision (±0.005 mm) for internal diameters within the 150–250 mm span, a range that corresponds to the standard workshop category for versatile inspection tasks. The instrument’s three-point measuring head provides stable centring on bore surfaces, reducing measurement scatter and lowering rework rates. The measuring depth 250 mm ensures reach into deeper bores while retaining the stiffness required for repeatable results, making it suitable for component production, jigs and fixtures. Integrate digital capture to speed inspection cycles Equipped with a colour 1.5" touchscreen and a microcomputer, the instrument simplifies setup and on-screen verification of readings; the Wireless + USB data outputs enable direct digital transfer to logging systems or SPC workflows, cutting manual transcription errors and accelerating reporting. The included adjustment ring supports fine mechanical setup before electronic capture, so operators benefit from a hybrid workflow that combines familiar mechanical handling with contemporary data connectivity. Calibrated delivery and audit-ready documentation The tool is delivered fully calibrated to ISO 17025 with a calibration certificate included, providing audit-ready traceability for internal quality systems and external audits. This documented calibration supports process confidence and helps meet industry inspection requirements without further onsite calibration steps. The integrated microcomputer control and three-point contact concept contribute not only to measurement consistency but also to simpler operator training and quicker first-off approvals on the production line. Contact Metav Werkzeuge for a technical consultation to verify that the Microtech Metrology three-point inside micrometer with ISO 17025 certificate matches the inspection requirements and to arrange prompt delivery through Emmerich Technical data Article number: 133725010 GTIN: 4061905074301 Manufacturer: Microtech Metrology Numbers / core technical data Accuracy: ±0.005 mm Measuring range: 150–250 mm Measuring depth: 250 mm Display: Colour 1.5" touchscreen Data output: Wireless + USB Special features Digital indicator with microcomputer control Three-point measuring head for stable centring Adjustment ring included Delivered calibrated to ISO 17025 with certificate FAQ How accurate is the measurement capability of this instrument? The instrument achieves an accuracy of ±0.005 mm, as supplied by Microtech Metrology, and is intended for tight-tolerance internal-diameter checks within the stated range. Does the micrometer arrive with a calibration certificate? Yes. This micrometer is delivered fully calibrated to ISO 17025 and includes the calibration certificate from Microtech Metrology. What data interfaces are available for digital capture? Data is exported via Wireless + USB outputs, enabling straightforward transfer of readings from the micrometer to data-collection or inspection systems. Which measuring range and depth are covered? The device covers internal diameters from 150 to 250 mm with a measuring depth of 250 mm, suited to standard workshop inspection tasks. Is the instrument suitable for production-line inspection and documentation? Yes. The combination of digital display, data output and ISO 17025 calibration makes the micrometer appropriate for production-line checks and traceable documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com